ML18081A184

Federal Register Notice for BTP 5-3 Fracture Toughness Requirements

ML18081A184
Person / Time
Issue date:	07/10/2018
From:	Jennivine Rankin NRC/NRO/DLSE/LB3
To:
Notich, M
Shared Package
ML18081A180	List: ML18081A184 ML18254A090
References
NRC-2018-0145
Download: ML18081A184 (19)

Text

[7590-01-P]

NUCLEAR REGULATORY COMMISSION

[NRC-2018-0145]

Proposed Revisions to Branch Technical Position 5-3 Fracture Toughness Requirements AGENCY: Nuclear Regulatory Commission.

ACTION: Standard review plan-draft section revision; request for comment.

SUMMARY

The U.S. Nuclear Regulatory Commission (NRC) is soliciting public comment on draft NUREG-0800, Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants: LWR Edition, Section BTP 5-3, Fracture Toughness Requirements. The NRC seeks comments on the proposed draft section revision of the Standard Review Plan (SRP) concerning guidance for the review of early site permits, combined construction and operating license and operating license applications and amendments for fracture toughness requirements.

DATES: Comments must be filed no later than September 11, 2018. Comments received after this date will be considered, if it is practical to do so, but the Commission is able to ensure consideration only for comments received on or before this date.

ADDRESSES: You may submit comments by any of the following methods:

• Federal Rulemaking Web Site: Go to http://www.regulations.gov and search for Docket ID NRC-2018-0145. Address questions about NRC dockets to Jennifer Borges; telephone: 301-287-9127; e-mail: Jennifer.Borges@nrc.gov. For technical questions, contact the individual listed in the FOR FURTHER INFORMATION CONTACT section of this document.

• Mail comments to: May Ma, Office of Administration, Mail Stop: TWFN A60M, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001.

For additional direction on obtaining information and submitting comments, see Obtaining Information and Submitting Comments in the SUPPLEMENTARY INFORMATION section of this document.

FOR FURTHER INFORMATION CONTACT: Mark D. Notich, Office of New Reactors, U.S. Nuclear Regulatory Commission, Washington DC 20555-0001; telephone:

301-415-3053; e-mail: Mark.Notich@nrc.gov.

SUPPLEMENTARY INFORMATION:

I. Obtaining Information and Submitting Comments A. Obtaining Information Please refer to Docket ID NRC-2018-0145 when contacting the NRC about the availability of information for this action. You may obtain publicly-available information related to this action by any of the following methods:

2

• Federal Rulemaking Web Site: Go to http://www.regulations.gov and search for Docket ID NRC-2018-0145.

• NRCs Agencywide Documents Access and Management System (ADAMS): You may obtain publicly-available documents online in the ADAMS Public Documents collection at http://www.nrc.gov/reading-rm/adams.html. To begin the search, select ADAMS Public Documents and then select Begin Web-based ADAMS Search. For problems with ADAMS, please contact the NRCs Public Document Room (PDR) reference staff at 1-800-397-4209, 301-415-4737, or by e-mail to pdr.resource@nrc.gov. The draft revision and current revision to NUREG-0800, Section BTP 5-3, Fracture Toughness Requirements is available in ADAMS under Accession No. ML18071A066 and ML070850035. The redline-strikeout version comparing the draft revision 3 and the current version of revision 2 is available in ADAMS under Accession No. ML18130A401.

• NRCs PDR: You may examine and purchase copies of public documents at the NRCs PDR, Room O1-F21, One White Flint North, 11555 Rockville Pike, Rockville, Maryland 20852.

B. Submitting Comments Please include Docket ID NRC-2018-0145 in your comment submission.

The NRC cautions you not to include identifying or contact information that you do not want to be publicly disclosed in your comment submission. The NRC will post all comment submissions at http://www.regulations.gov as well as enter the comment submissions into ADAMS. The NRC does not routinely edit comment submissions to remove identifying or contact information.

3

If you are requesting or aggregating comments from other persons for submission to the NRC, then you should inform those persons not to include identifying or contact information that they do not want to be publicly disclosed in their comment submission. Your request should state that the NRC does not routinely edit comment submissions to remove such information before making the comment submissions available to the public or entering the comment into ADAMS.

II. Further Information The NRC seeks public comment on the proposed draft section revision of SRP Section BTP 5-3. The changes include incorporation of text describing NRC review of potential non-conservatisms in BTP 5-3, Revision 2, Subsection B1.1; a reference to a memorandum describing the results of the NRC review of the potential non-conservatisms; and numerous textual updates to incorporate pressure-temperature limit reports, 10 CFR 50.61a, 10 CFR part 52, Licenses, Certifications, and Approvals for Nuclear Power Plants, clearer citations, and nozzle language.

Following NRC staff evaluation of public comments, the NRC intends to finalize SRP Section BTP 5-3 in ADAMS and post it on the NRCs public Web site at http://www.nrc.gov/reading-rm/doc-collections/nuregs/staff/sr0800/. The SRP is guidance for the NRC staff. The SRP is not a substitute for the NRC regulations, and compliance with the SRP is not required.

4

III. Backfitting and Issue Finality Issuance of this draft SRP section, if finalized, would not constitute backfitting as defined in 10 CFR 50.109, (the Backfit Rule) or otherwise be inconsistent with the issue finality provisions in 10 CFR part 52. The NRCs position is based upon the following considerations.

1. The draft SRP positions, if finalized, would not constitute backfitting, inasmuch as the SRP is internal guidance to NRC staff directed at the NRC staff with respect to their regulatory responsibilities.

The SRP provides internal guidance to the NRC staff on how to review an application for NRC regulatory approval in the form of licensing. Changes in internal staff guidance are not matters for which either nuclear power plant applicants or licensees are protected under either the Backfit Rule or the issue finality provisions of 10 CFR part 52.

2. The NRC staff has no intention to impose the SRP positions on current licensees or already-issued regulatory approvals either now or in the future.

The NRC staff does not intend to impose or apply the positions described in the draft SRP to existing (already issued) licenses and regulatory approvals. Hence, the issuance of a final SRP, even if considered guidance within the purview of the issue finality provisions in 10 CFR part 52, would not need to be evaluated as if it were a backfit or as being inconsistent with issue finality provisions. If, in the future, the NRC staff seeks to impose a position in the SRP on holders of already issued licenses in a manner that does not provide issue finality as described in the applicable issue finality provision, then the staff must make the showing as set forth in the Backfit Rule or 5

address the criteria for avoiding issue finality as described in the applicable issue finality provision.

3. Backfitting and issue finality do notwith limited exceptions not applicable hereprotect current or future applicants.

Applicants and potential applicants are not, with certain exceptions, protected by either the Backfit Rule or any issue finality provisions under 10 CFR part 52. This is because neither the Backfit Rule nor the issue finality provisions under 10 CFR part 52 with certain exclusions discussed belowwere intended to apply to every NRC action that substantially changes the expectations of current and future applicants.

The exceptions to the general principle are applicable whenever an applicant references a 10 CFR part 52 license (e.g., an early site permit) and/or NRC regulatory approval (e.g., a design certification rule) with specified issue finality provisions. The NRC staff does not, at this time, intend to impose the positions represented in the draft SRP in a manner that is inconsistent with any issue finality provisions. If, in the future, the staff seeks to impose a position in the draft SRP in a manner which does not provide issue finality as described in the applicable issue finality provisions, then the staff must address the criteria for avoiding issue finality as described in the applicable issue finality provision.

Dated at Rockville, Maryland, this 10th day of July, 2018.

For the Nuclear Regulatory Commission.

/RA/

Jennivine Rankin, Acting Chief, Licensing Branch 3, Division of Licensing, Siting, and Environmental Analysis, Office of New Reactors.

6

ML18081A184 (FRN); ML18081A180 (Package); *via e-mail; ADM-012 OFFICE PM:NRO/DEIA/NRCB* LA:NRO/DEIA/NRCB* DD:NRO/:DEI OCIO*

NAME MNotich BAbeywickrama RCaldwell DCullison DATE 5/10/2018 3/15/2018 4/23/2018 5/21/2018 OFFICE DD:NRR/DPR* DDD:NRO/DLSE* OGC* BC:NRO/DNRL/LB3 NAME DMorey ABradford OMikula JRankin (Acting)

DATE 5/7/2018 5/8/2018 6/28/2018 7/10/2018