ML16273A020

002N4207-NP, General Electric Nuclear Test Reactor Annual Average Dispersion Factor Adequacy Review, Revision 1

ML16273A020
Person / Time
Site:	Vallecitos Nuclear Center
Issue date:	09/28/2016
From:	GE-Hitachi Nuclear Energy Americas
To:	Office of Nuclear Reactor Regulation
Shared Package
ML16273A015	List: ML16273A016 ML16273A017 ML16273A018 ML16273A020 ML16273A021
References
TAC 16-010
Download: ML16273A020 (27)

Text

Enclosure 4 TAC 16-010 002N4207-NP, General Electric Nuclear Test Reactor Annual Average Dispersion Factor Adequacy Review, Revision 1 Public Version This is a non-proprietary version of Enclosure 3, from which the proprietary information has been removed. Portions of the document that have been removed are identified by white space within double brackets, as shown here (( )).

GE Hitachi Nuclear Energy 002N4207-NP Revision 1 September 2016 Non-Proprietary Information - Class I (Public)

General Electric Nuclear Test Reactor Annual Average Dispersion Factor Adequacy Review Copyright 2015-2016, GE-Hitachi Nuclear Energy Americas LLC All Rights Reserved

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

INFORMATION NOTICE This is a non-proprietary version of the document 002N4207-P, Revision 1, which has the proprietary information removed. Portions of the document that have been removed are indicated by an open and closed bracket as shown here (( )).

IMPORTANT NOTICE REGARDING CONTENTS OF THIS REPORT Please Read Carefully The design, engineering, and other information contained in this document is furnished for the purposes of supporting GEH in the sale of a portion of the VNC site in proceedings before the U.S. Nuclear Regulatory Commission (NRC). The use of this information by anyone for any purpose other than that for which it is intended, is not authorized; and with respect to any unauthorized use, GEH makes no representation or warranty, and assumes no liability as to the completeness, accuracy, or usefulness of the information contained in this document.

Page 2 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

REVISION

SUMMARY

Section Rev. Modified Revision Description 0 All Initial Issue 1 Multiple Specific instances of proprietary information identified.

Page 3 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

TABLE OF CONTENTS ACRONYMS AND ABBREVIATIONS ....................................................................................... 6 EXECUTIVE

SUMMARY

............................................................................................................ 7

1.0 INTRODUCTION

................................................................................................................. 8 1.1 PURPOSE ................................................................................................................................ 8 1.2 SCOPE ..................................................................................................................................... 8 2.0 METHODOLOGY ................................................................................................................ 8 2.1 GE NTR METHODOLOGY ................................................................................................... 9 2.1.1 GE NTR Dispersion Factor ...................................................................................... 9 2.2 ADEQUACY REVIEW /Q METHODOLOGY.................................................................. 10 3.0 INPUTS AND ASSUMPTIONS ........................................................................................ 10 3.1 ASSUMPTIONS .................................................................................................................... 10 3.2 INPUTS.................................................................................................................................. 11 3.2.1 Meteorological Data ............................................................................................... 11 3.2.2 NTR Stack Release Parameters .............................................................................. 15 4.0 XOQDOQ MODEL ............................................................................................................ 19 5.0 RESULTS AND CONCLUSIONS ..................................................................................... 24

6.0 REFERENCES

.................................................................................................................... 26 Page 4 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

LIST OF TABLES Table 3 Wind Speed Categories .............................................................................................11 Table 3 Joint Frequency Distribution .....................................................................................13 Table 3-3 -NTR /Q Analysis Boundary Distances.....................................................................18 Table 3 Adequacy Review /Q Analysis Boundary Distances ..............................................18 Table 4 XOQDOQ Input Data Card 1 ....................................................................................20 Table 4 XOQDOQ Input Data Card 3 ....................................................................................21 Table 4 XOQDOQ Input Data Card 4 ....................................................................................21 Table 4 XOQDOQ Input Data Card 7 ....................................................................................22 Table 4 XOQDOQ Input Data Cards 12, 13, and 14 ..............................................................22 Table 4 XOQDOQ Input Data Card 16 ..................................................................................23 Table 5 Adequacy Review Case Results (sec/m3) ..................................................................24 Table 5 Annual Average /Qs for Downwind Distances from the NTR Stack (sec/m3) .......25 LIST OF FIGURES Figure 3-1: NTR Boundary Distances ..........................................................................................17 Page 5 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

ACRONYMS AND ABBREVIATIONS Item Short Form Description 1 AGL Above Ground Level 2 /Q Chi-Over-Q (Atmospheric Dispersion Factor) 3 D/Q Deposition Factor 4 E East 5 GE General Electric 6 GEH GE-Hitachi Nuclear Energy 7 JFT Joint Frequency Table 8 N North 9 NRC Nuclear Regulatory Commission 10 NTR Nuclear Test Reactor 11 NUREG Nuclear Regulatory (Prefix to Identify a Class of NRC Technical Reports) 12 RG Regulatory Guide 13 SAR Safety Analysis Report 14 S South 15 VNC Vallecitos Nuclear Center 16 W West Page 6 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

EXECUTIVE

SUMMARY

The adequacy of the General Electric (GE) Nuclear Test Reactor (NTR) annual average atmospheric dispersion factor (/Q) has been reviewed for its application to a reduced site area associated with a proposed sale of land at the Vallecitos Nuclear Center (VNC). The proposed land sale will reduce some directional sector distances to the site boundary from the NTR stack which are critical parameters used in the determination of the annual average /Q.

The sector results of the adequacy review case for an 8-day decayed release are shown in Table 5-1. The most limiting annual average /Q is 2.2E-05 sec/m3 which occurs in the Southwest (SW) Sector. The adequacy review annual average /Q is bounded by the current GE NTR annual average /Q of 3.48E-05 sec/m3 (or 3.48E-11 sec/ml) by approximately 37%.

As shown in Table 5-2, all annual average /Qs for distances up to 80467 meters (50 miles) are less than the calculated value of 2.2E-05 sec/m3 in the adequacy review results for the assumed site boundary. Thus, it is demonstrated that a more limiting annual average /Q does not occur beyond the assumed boundary.

Therefore, the NTR Safety Analysis Report (SAR) annual average /Q remains bounding and is adequate for continued use as the bases for the stack action levels (as described in Section 6.4 of the NTR SAR) after the land sale occurs if the parcel of land sold does not exceed the minimum distance of 510 meters from the NTR stack in the Northwest (NW) through East-Northeast (ENE) sectors.

Page 7 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

1.0 INTRODUCTION

Recently, a proposal has been made to sell a portion of the land on the north side of the GE NTR site located at VNC. The proposed land sale would reduce some sector distances to the site boundary from the NTR stack which are critical parameters used in the determination of the annual average /Q. Therefore, the reduction in boundary distances resulting from the potential land sale may impact on the annual average /Q used in the licensing basis of the GE NTR SAR

[1].

1.1 Purpose The purpose of this analysis is to calculate a conservative annual average /Q for the GE NTR using current methodology for comparison to the existing annual average /Q reported in the NTR SAR so that the adequacy of the existing value can be established. If the annual average

/Q calculated for this adequacy review is bounded by the SAR annual average /Q value then no change to the SAR value will be made, otherwise the adequacy review /Q will replace the SAR value.

1.2 Scope Depending on the outcome of the comparison of the annual average /Q calculated here to the SAR value, the results of this analysis and subsequent conclusions will be used to support the NTR license in one of the following ways:

1. Direct inclusion of the adequacy review annual average /Q in the NTR SAR (if it is not bounded by the SAR value).

Or

2. Proof outside the NTR SAR that the existing annual average /Q is adequate (if the adequacy review annual average /Q is bounded by the SAR value).

2.0 METHODOLOGY The approach used to calculate the NTR SAR average annual /Q employed a method that predated current regulatory guidance using a computer code which is no longer available and is described in Reference 2. This method followed the approach in the For Comment version of Regulatory Guide (RG) 1.145 annual average dispersion factors [3].

The annual average /Q calculated for this adequacy review follows the guidance and procedures described in RG 1.111 which is the current methodology employed at commercial nuclear plants in the United States [4].

Because the dispersion factor being reviewed is based on older methods in many cases the terminology used has changed over time. In order to clarify some of these differences it should be recognized that for the purpose of this report and the reference documents cited in this report the terms dilution factor, dispersion-dilution coefficient, dispersion-dilution factor, /Q, effluent /Q, average annual dispersion factor, long term /Q , and normal operation

/Q are all referring to an annual average /Q and the terms are used interchangeably. This Page 8 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public) report does not reference or discuss any short term or accident /Q factors (onsite or offsite) and they are not in the scope of this adequacy review.

2.1 GE NTR Methodology The annual average /Q for a release from the NTR stack to the site boundary is described in a report entitled NTR Stack Release Limits [2]. As detailed in Reference 2, the RALOC code developed by GE was used for the calculation [5]. The RALOC code manual states that at the time the code was developed (1976) there was no formal guidance issued by the Nuclear Regulatory Commission (NRC) which defined an acceptable method to generate atmospheric dispersion factors, and that the method used in RALOC is based on personal communication with the NRC.

A review of the RALOC code description indicates the following major considerations which are now required by formal regulations were not addressed in the development of the code.

1. Elevated Releases

2. Vent releases from a stack on top of a building

3. The impact of surrounding terrain on dispersion

4. The treatment of calm winds The methods used for the NTR analysis were less developed than those currently employed.

2.1.1 GE NTR Dispersion Factor The NTR vents to the environment from a stack on top of the free standing building that houses the NTR (designated VNC Building 105). The annual average /Q associated the Building 105 stack is 3.48E-11 sec/ml. As explained in a GEH response to a request for information from the NRC, the single maximum calculated annual average /Q value of 3.48E-11 sec/ml was selected from the 16 sector average values [6]. This value occurs in the east-southeast sector at 622 meters from the stack, and is used to determine the NTR stack release limits.

In addition, the following critical assumptions associated with the NTR annual average /Q were listed in Reference 2.

1. Wind direction, speed and stability condition for each hour during the year was recorded and used to calculate the /Q value in 16 equal sectors (22.5°) at the site boundary.

2. Distances to the 16 sector nearest boundary points, starting at the north sector and proceeding clockwise are (meters): 2302, 2390, 1926, 1615, 955, 622, 522, 510, 515, 597, 756, 636, 622, 634, 749, and 1109.

3. Building 105 cross-sectional area, for building wake effect (square meters) = 281 m2.

4. Stack height Above Ground Level (AGL, meters): 0 m.

5. Pasquill type meteorological condition designations.

6. The sector average /Q values are used instead of centerline values.

7. No plume depletion was accounted for.

8. Continuous release conditions were used.

Page 9 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Typically /Qs are reported in units of sec/m3 so for the purpose of comparing the SAR value to the adequacy review dispersion factor calculated for this report it is converted to 3.48E-05 sec/m3.

2.2 Adequacy Review /Q Methodology This analysis has been performed in accordance with RG 1.111 [4]. The XOQDOQ computer code, which was developed to implement RG 1.111, is used to perform this analysis [7].

A description of the release conditions, the terrain around the plant, the receptor locations and wind information needed to perform the XOQDOQ evaluation are presented in this report. The XOQDOQ: Computer Program for the Meteorological Evaluation of Routine Effluent Releases at Nuclear Power Stations manual (NUREG/CR-2919) defines all input parameters used in the model [7].

3.0 INPUTS AND ASSUMPTIONS To the extent possible, the inputs used for the SAR annual average /Q have been used for the adequacy review annual average /Q. Some assumptions applied in the SAR /Q analysis have been changed for the adequacy review /Q if allowed by the governing regulatory guidance in RG 1.111 and NUREG/CR-2919.

3.1 Assumptions The following critical assumptions associated with the adequacy review annual average /Q model have been applied.

1. The release from the NTR stack is assumed to be a mixed mode release (a mixture of elevated and ground releases) consistent with requirements of RG 1.111 for an effluent release from a vent at the level of or above adjacent structures.

2. The meteorological data used for the SAR annual average /Q is assumed to be applicable to the adequacy review annual average /Q. This is a conservative assumption because this wind data ((

))

3. In accordance with the recommendations in NUREG/CR-2919 Section 3.7, the upper limit to the highest wind speed category is assumed to be 5 units greater than the highest wind speed category in the wind data set ((( )) as described in Section 3.2.1).

4. The distances to the site boundary for the directional sectors that may be impacted by the land sale (the NW through ENE sectors) are all assumed to be 510 meters from the NTR stack. This is a conservative assumption because the actual distances to the site boundary for the NW through ENE sectors are all greater than 510 meters (see Table 3-4).

5. The distances to the boundary for all sectors not impacted by the land sale are assumed to be the same as those used in the NTR SAR annual average /Q analysis (Reference 2).

6. The NTR stack release is assumed to undergo radioactive decay with a half-life of 8 days with no credit for depletion of the plume consistent with the SAR annual average /Q analysis (Reference 2).

Page 10 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public) 3.2 Inputs 3.2.1 Meteorological Data Meteorological data is formatted for use with the XOQDOQ code as a Joint Frequency Table (JFT), which characterizes the data as a table of annual fractional occurrences during a given time period of a particular combination of stability class, wind direction, and wind speed category.

The XOQDOQ JFT was created from data obtained from the VNC meteorological data collection tower and reported in Reference 8. As stated in Reference 8, the data was collected in accordance with the Original Issue of RG 1.23 [9]. Reference 8 indicates that all periods of calm winds (less than 2 mph) are treated as Pasquill stability class G with an assumed windspeed of 1 mph.

This treatment of calm winds is very conservative considering every stability class typically has some calm winds occurring at various times. Distributing all calms into a single stability class drives the JFT to be weighted toward the most limiting Pasquill stability class which drives higher /Qs. Conversely, the XOQDOQ methodology would distribute the calms between each stability class as they were recorded.

To ensure the adequacy review case meteorological basis is consistent with the original analysis in Reference 2, the distribution of calms reported in Reference 8 was not changed.

Instrument Height The instrument height for the VNC meteorological data tower is (( ))

above the surrounding terrain [10].

Wind Speed Categories The wind speed categories reported in Reference 8 are shown in Table 3-1. The upper limit of each wind speed category is used in the XOQDOQ model. In accordance with NUREG/CR-2919 Section 3.7, since the highest category is expressed with no upper limit the XOQDOQ code requires that an upper limit must be assumed, and 5 units greater than the largest wind speed is generally acceptable. Thus, the upper limit for the highest wind speed category is assumed to be

(( )).

Table 3 Wind Speed Categories Wind Speed Categories Upper Limit to Category (mph)

((

))

Page 11 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Joint Frequency Distribution The JFTs provided in Reference 8 are fractional occurrences of each speed and category for the years 1976 and 1977 which were summed then averaged for use in XOQDOQ as shown in Table 3-2. Thus, the JFT used for the SAR /Q has been used to calculate the adequacy review /Q.

Page 12 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Table 3 Joint Frequency Distribution Direction Sector N NNE NE ENE E ESE SE SSE S SSW SW WSW W WNW NW NNW Wind Speed (mph)

((

))

Page 13 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Table 3 Joint Frequency Distribution Direction Sector N NNE NE ENE E ESE SE SSE S SSW SW WSW W WNW NW NNW Wind Speed (mph)

((

))

Page 14 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public) 3.2.2 NTR Stack Release Parameters As described in Reference 2, the SAR annual average /Q analysis did not model the NTR stack

[2], as that was not an option (( )) [5]. Conversely, RG 1.111 includes methods for crediting the stack because most gaseous effluent released from nuclear sites do occur through tall stacks or vents on top of buildings. Therefore, this adequacy review credits the NTR stack which vents to the environment from the top of the free standing building that houses the NTR. The following stack parameters needed for the XOQDOQ model were collected from various VNC documentation.

1. Stack height = 13.7 m [11]

2. Stack Cross Sectional Area = (( )) [12]

3. Stack flow rate = 1800 ft3/minute (cfm) [6].

4. Building Height = (( )) [13]

5. Building Wake Area = 281 m2 [2]

Because VNC Building 105 is not in the zone of influence of taller structures and the release point is above the building itself, this analysis models the release as a mixed mode release as allowed by RG 1.111 [4].

3.2.2.1 Exit Velocity This analysis credits the initial exit velocity of the release from the NTR stack. As indicated in the SAR /Q analysis (Reference 2) the velocity of the NTR stack effluent release was not considered. However, the adequacy review /Q analysis will credit the exit velocity of the effluent release as allowed by RG 1.111. The NTR stack average flow rate during operation used for limiting concentrations and calculating measured releases is 1800 cfm (0.850 m3/sec)

[6]. The NTR stack has a cross sectional area of (( )) [12], therefore the exit velocity 3 2 is 7.2 m/sec [equal to (0.850 m /sec)/(0.1176 m )].

3.2.2.2 Receptor Distances The land that may potentially be sold is located on the north side of the VNC site. Since the exact distances are not readily available this analysis develops minimum distances in order to bound the potential land sale.

As shown in Section 2.1.1, the distances to the boundary for each the sixteen 22.5° direction sectors were used for the NTR /Q analysis. As stated in Reference 2, the distances to the closest boundary point of each sector from the NTR were scaled from drawing number 2l2E239, "Topographic Map". The same drawing appears as Figure 2.4 of Reference 11 and was used to perform basic measurements for this adequacy review as depicted in Figure 3-1. Figure 3-1 contains the following markings:

• The dotted blue line on Figure 3-1 bisects the VNC site from east to west consistent with a typical plot line used for a land sale, and is tangentially as close as possible to the fence line of the GE Test Reactor (GETR) which has been shut down and issued a possession only license. Therefore, the area north of the dotted blue line best represents the largest plot of land that could be sold at VNC.

Page 15 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

• The dotted black lines depict the sixteen 22.5° direction sectors necessary to perform the dispersion analysis.

• The red measurement markers depict the distances to sector boundaries for sectors not impacted by the land sale. These measurements establish that the SAR analysis and this adequacy review analysis are based on the same site layout (see Table 3-3).

• The green measurement markers depict the distances to sector boundaries for sectors that will be impacted by the land sale. As with the red markers, these measurements demonstrate the Reference 2 distances are based on the same site layout as this adequacy review (see Table 3-3).

• The solid blue measurement markers depict minimum distances that bound the potential land sale for the impacted sectors.

Page 16 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Figure 3-1: NTR Boundary Distances Page 17 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

First, to ensure the accuracy of measurements made using Figure 3-1, the boundary distances for each sector used in Reference 2 were recreated. As shown in Table 3-3, the boundary distances measured using Figure 3-1 were in close agreement with those used in Reference 2.

Table 3-3 -NTR /Q Analysis Boundary Distances Reference 2 Measured from Figure 3-1 Measured from Figure 3-1 % From Sector Boundary (m) Boundary (ft) Boundary (m) Reference 2 S 515 1689 515 0.00%

SSW 597 1999 609 2.01%

SW 756 2498 762 0.79%

WSW 636 2087 636 0.00%

W 622 2074 632 1.61%

WNW 634 2083 635 0.16%

NW 749 2450 747 -0.27%

NNW 1109 3633 1107 -0.18%

N 2302 7559 2304 0.09%

NNE 2390 7841 2390 0.00%

NE 1926 6319 1926 0.00%

ENE 1615 5299 1615 0.00%

E 955 3328 1014 6.18%

ESE 622 2041 622 0.00%

SE 522 1713 522 0.00%

SSE 510 1674 510 0.00%

For consistency with Reference 2, the distances to the site boundary for those sectors not impacted by the land sale are unchanged in the adequacy review case. As depicted in Figure 3-1, only 6 sectors will potentially be reduced by the land sale from the NW sector sweeping clockwise to the ENE sector. New boundary distances for the impacted sectors were measured as shown in Figure 3-1 and listed in Table 3-4 under the heading New Boundary Distance.

While the revised distances would likely bound those of any land sale at VNC, for further conservatism the NW through ENE sector distances are assumed to be only 510 meters from the NTR stack which is the shortest of all the distances used in Reference 2. Therefore, the final distances used in the adequacy review case model are those shown in Table 3-4 under the heading Assumed Boundary Distance.

Table 3 Adequacy Review /Q Analysis Boundary Distances New New Assumed Boundary Boundary  % From Boundary Sector Reference 2 Distance Distance Reference 2 Distance (ft) (m) (m)

S 515 No change No change N/A 515 Page 18 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Table 3 Adequacy Review /Q Analysis Boundary Distances New New Assumed Boundary Boundary  % From Boundary Sector Reference 2 Distance Distance Reference 2 Distance (ft) (m) (m)

SSW 597 No change No change N/A 597 SW 756 No change No change N/A 756 WSW 636 No change No change N/A 636 W 622 No change No change N/A 622 WNW 634 No change No change N/A 634 NW 749 2311.62 705 -5.87% 510 NNW 1109 1957.80 597 -46.17% 510 N 2302 1955.98 596 -74.11% 510 NNE 2390 2011.15 613 -74.35% 510 NE 1926 2366.20 721 -62.56% 510 ENE 1615 3693.18 1126 -30.28% 510 E 955 No change No change N/A 955 ESE 622 No change No change N/A 622 SE 522 No change No change N/A 522 SSE 510 No change No change N/A 510 3.2.2.3 Terrain Correction Factors Because terrain factors for the NTR site were not developed for Reference 2 open terrain correction factors described in RG 1.111 and implemented by the XOQDOQ code have been applied in the adequacy review /Q model [4, 7]. As shown in Figure 3.2 of Reference 7, for all boundary distances less than 1 km the open terrain correction factor will multiply the resulting

/Q by a factor of 4. Because all of the distances used are less than 1 km this is a very conservative application of the open terrain correction factors.

4.0 XOQDOQ MODEL The XOQDOQ code reads input files with the extension dat, and generates standard output files entitled XOQ_OUT.DAT when a given case is executed. To ensure that the adequacy review case can easily be recreated in the future, all entries made in the model are explicitly stated in the following section.

Card 1 Card 1 is an array (KOPT) options, such that 1 = do, 0 = bypass. All XOQDOQ variables used for Card 1 are shown in Table 4-1.

Page 19 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Table 4 XOQDOQ Input Data Card 1 XOQDOQ NTR Parameter Description Source / Basis Variable Value KOPT (1) ((

KOPT (2)

))

Option to compute a sector spread for comparison with centerline KOPT (3) 1 The default value of 1 has been used.

value in a purge calculation.

(Normally = 1)

Option to plot short term /Q KOPT (4) 0 values versus probability of The default value of 0 has been used.

occurrence. (Normally = 0)

Option to use cubic spline in lieu of least square function for fitting KOPT (5) 1 The default value of 1 has been used.

intermittent release distribution.

(Normally = 1)

Option to punch radial segment KOPT (6) 1 The default value of 1 has been used.

X/Q and D/Q values.

Setting this value to 1 allows the Option to punch output of /Q and KOPT (7) 1 programs to generate results for the D/Q values of the points of interest.

points of interests [receptors].

Option to correct /Q and D/Q This option applies a correction for KOPT (8) 1 values for open terrain recirculation and stagnation at downwind recirculation. distances (See Section 3.2.2.3).

Option to correct /Q and D/Q No site-specific diffusion data is KOPT (9) 0 values using site-specific terrain available.

recirculation data.

Option to use desert sigma curves.

KOPT (10) 0 The NTR site is not in the desert.

(Normally = 0)

Option to use 30 degree sectors for north, south, east, and west with 20 The joint frequency data is based on KOPT (11) 0 degree sectors in all other 22.5° sectors as stated in Reference 2.

directions. (Normally = 0)

Card 2 Card 2 is the main title card for the input file and is printed at the beginning of the output file.

The Card 2 has been populated with the phrase General Electric Nuclear Test Reactor 2015.

Card 3 All XOQDOQ variables used for Card 3 are shown in Table 4-2.

Page 20 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Table 4 XOQDOQ Input Data Card 3 XOQDOQ NTR Parameter Description Source / Basis Variable Value Number of velocity (wind Joint frequency data is based on (( )) wind NVEL (( )) speed) categories.

speed categories.

The meteorological data is based on the NSTA 7 Number of stability categories. Pasquill stability classes (A - G) in accordance with Reference 4.

Number of distances with The open terrain correction factor has been NDIS 0 terrain data for each sector. used as described in Section 3.2.2.3.

The increment in percent for XOQDOQ Default value as described in INC 15 which plotted results are Reference 7.

printed out. (Normally = 15)

The number of titles of The only receptor modeled is the site NPTYPE 1 receptor types (cow, garden, boundary.

etc.). Maximum of eight.

The number of release exit NEXIT 1 The NTR stack is one release location.

points.

No site-specific diffusion data is available.

This data would typically be determined by The number of distances of experiments or comparison to results from a site-specific correction factors variable trajectory model. Note that if NCOR NCOR 0 for recirculation. (Maximum is set to 0 the resulting output file will include of 10) the tag VRDIST, VRCR NOT INPUTTED indicating the parameters describing diffusion data have not been used.

Card 4 All XOQDOQ variables used for Card 4 are shown in Table 4-3.

Table 4 XOQDOQ Input Data Card 4 XOQDOQ NTR Value Parameter Description Source / Basis Variable The height AGL in meters of the measured PLEV (( )) wind presented in the joint frequency data. See Section 3.2.2.

(See Section 4.17 of NUREG/CR-2919 [7])

Per Reference 7, an overall half-For each I: The half-life (days) used in the life of 2.26 days is acceptable for DECAYS 1 = 101

/Q calculations: if DECAYS>100, no decay short-lived noble gases and 8 days (I) 2 = 2.26 will occur; if DECYS <0, depletion factor for all iodines released to the

[=], 3 3=8 will be used in the /Q calculations. atmosphere. Reference 2 also applied a decay factor of 8 days.

All parameters have been PLGRAD 0 Plant grade elevation (feet above sea level). normalized to plant grade. No further adjustment is required.

Page 21 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Cards 5 and 6 Card 5 consists of the calm wind for each stability category, and Card 6 consists of the JFT shown in Table 3-2. Because the calms were distributed into the lowest wind speed category in stability class G, Card 5 is a blank line per Section 3.8 of Reference 7.

Card 7 All XOQDOQ variables used for Card 7 are shown in Table 4-4.

Table 4 XOQDOQ Input Data Card 7 NTR XOQDOQ Variable Parameter Description Source / Basis Value A unit correction factor applied to wind speed classes. If UCOR<0: no The wind speed categories corrections will be made. If UCOR 101 are in units of miles per UCOR>100: the wind speed hour.

classes will be converted from miles per hour to meters per second.

((

The maximum wind speed in The wind speed categories each wind-speed class, in for the evaluation were UMAX (I) either miles/hour or taken directly from meters/second. Reference 8.

))

Cards 8 through 11 Because site specific terrain factors were not applied there are no entries for Cards 8 through 11.

Cards 12, 13, and 14 The Card types 12, 13, and 14 of the XOQDOQ input deck are shown in Table 4-5.

Table 4 XOQDOQ Input Data Cards 12, 13, and 14 NTR XOQDOQ Variable Parameter Description Source / Basis Value Card 12 The number of receptor locations for a particular 16 See Section NPOINT (I) receptor type (such as number of cows, gardens, or 3.2.2.2.

I = 1, NTYPE site boundaries)

Card 13 The title of the receptor type for the receptor The site Boundary TITLPT (I, J) locations. boundary.

Page 22 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Table 4 XOQDOQ Input Data Cards 12, 13, and 14 NTR XOQDOQ Variable Parameter Description Source / Basis Value Card 14 The receptor direction and distance. KDIR is the KDIR (I, N) Values shown direction of interest, such that 1 = S, 2 = SSW,, 16 See Section PTDIST (I, N) in Table 3-4. = SSE. PTDIST is the distance, in meters, to the 3.2.2.2 N=1, NPOINT (I) receptor location.

Card 15 Card 15 is the title card for the release point which has been entered as NTR Stack 105.

Card 16 The Card type 16 of the XOQDOQ input deck is shown in Table 4-6.

Table 4 XOQDOQ Input Data Card 16 XOQDOQ Variable NTR Value Parameter Description Source / Basis The exit velocity of the release point in EXIT (I) (( meters per second.

See Section 3.2.2.1.

The inside diameter of the vent or stack in DIAMTR See Section 3.2.2.1.

meters.

The release height (meters AGL). If the HSTACK release is 100% elevated then input is the See Section 3.2.2 negative of the height.

Height of the vents building (meters HBLDG See Section 3.2.2 AGL).

The minimum cross-sectional area for the CRSEC (I) See Section 3.2.2 vents building (in m2).

The wind height used for the elevated SLEV (I) )) vent release (meters AGL). See Section 3.2.1 This analysis conservatively HEATR (I) 0 The vent heat emission rate (cal/sec). neglects the effects of buoyancy.

Card 17 Card 17 is for use with intermittent releases and requires a single letter identifier followed by 3 numeric purge parameters. Since no intermittent releases are being modeled, these parameters were entered an A followed by three 0 values.

Page 23 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public) 5.0 RESULTS AND CONCLUSIONS The sector results of the adequacy review case for an 8-day decayed release are shown in Table 5-1. The most limiting annual average /Q is 2.2E-05 sec/m3 which occurs in the SW Sector.

This result is bounded by the NTR annual average /Q of 3.48E-05 sec/m3 (or 3.48E-11 sec/ml) by approximately 37%, thus, the NTR annual average /Q is judged to be adequate if the parcel of land sold does not exceed the minimum distance of 510 meters from the NTR stack in the NW through ENE sectors.

Table 5 Adequacy Review Case Results (sec/m3)

S 7.00E-06 SSW 1.30E-05 SW 2.20E-05 WSW 2.10E-05 W 7.90E-06 WNW 5.10E-06 NW 2.10E-06 NNW 2.20E-06 N 2.50E-06 NNE 3.20E-06 NE 5.90E-06 ENE 4.10E-06 E 4.40E-06 ESE 1.70E-06 SE 6.60E-07 SSE 1.60E-06 Because the distance to the boundary of 510 meters in the NW through ENE sectors was assumed to be the shortest boundary distance from the prior analysis (shown in Reference 6),

Table 5-2 is provided from the same XOQDOQ output to demonstrates that a more limiting annual average /Q does not occur beyond the assumed boundary. As shown in Table 5-2, all annual average /Qs for distances up to 80467 meters (50 miles) are less than the calculated value of 2.2E-05 sec/m3 in the final adequacy review results for the assumed site boundary.

Page 24 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

Table 5 Annual Average /Qs for Downwind Distances from the NTR Stack (sec/m3) 0.5-1 1-2 2-3 3-4 4-5 5-10 10-20 20-30 30-40 40-50 Distance from the NTR (miles) (miles) (miles) (miles) (miles) (miles) (miles) (miles) (miles) (miles)

Stack 805-1609 1609-3219 3219-4828 4828-6437 6437-8047 8047-16093 16093-32187 32187-48280 48280-64374 64374-80467 Sector (meters) (meters) (meters) (meters) (meters) (meters) (meters) (meters) (meters) (meters)

S 9.46E-06 5.32E-06 2.42E-06 1.41E-06 9.48E-07 4.69E-07 1.93E-07 1.02E-07 6.66E-08 4.80E-08 SSW 9.72E-06 4.37E-06 1.87E-06 1.07E-06 7.13E-07 3.49E-07 1.42E-07 7.49E-08 4.88E-08 3.52E-08 SW 1.45E-05 5.17E-06 2.04E-06 1.14E-06 7.48E-07 3.60E-07 1.44E-07 7.52E-08 4.88E-08 3.52E-08 WSW 1.32E-05 5.37E-06 2.22E-06 1.26E-06 8.35E-07 4.06E-07 1.64E-07 8.60E-08 5.59E-08 4.03E-08 W 1.10E-05 6.09E-06 2.76E-06 1.60E-06 1.08E-06 5.33E-07 2.19E-07 1.16E-07 7.56E-08 5.45E-08 WNW 8.76E-06 4.98E-06 2.27E-06 1.32E-06 8.89E-07 4.40E-07 1.81E-07 9.59E-08 6.26E-08 4.52E-08 NW 1.38E-06 6.04E-07 2.54E-07 1.44E-07 9.61E-08 4.69E-08 1.90E-08 1.01E-08 6.56E-09 4.75E-09 NNW 1.60E-06 7.76E-07 3.39E-07 1.95E-07 1.31E-07 6.42E-08 2.62E-08 1.39E-08 9.05E-09 6.53E-09 N 1.89E-06 9.29E-07 4.08E-07 2.35E-07 1.58E-07 7.76E-08 3.18E-08 1.68E-08 1.10E-08 7.91E-09 NNE 1.09E-06 3.16E-07 1.11E-07 5.93E-08 3.81E-08 1.78E-08 6.85E-09 3.52E-09 2.27E-09 1.63E-09 NE 1.72E-06 4.11E-07 1.28E-07 6.48E-08 4.05E-08 1.82E-08 6.66E-09 3.34E-09 2.14E-09 1.54E-09 ENE 1.23E-06 3.08E-07 9.91E-08 5.12E-08 3.24E-08 1.48E-08 5.57E-09 2.85E-09 1.85E-09 1.34E-09 E 3.95E-06 1.79E-06 7.62E-07 4.35E-07 2.91E-07 1.42E-07 5.79E-08 3.06E-08 2.00E-08 1.45E-08 ESE 3.95E-06 2.33E-06 1.07E-06 6.22E-07 4.20E-07 2.08E-07 8.56E-08 4.54E-08 2.96E-08 2.14E-08 SE 4.62E-07 2.13E-07 9.12E-08 5.21E-08 3.48E-08 1.70E-08 6.93E-09 3.66E-09 2.39E-09 1.72E-09 SSE 2.62E-06 1.51E-06 6.87E-07 4.00E-07 2.70E-07 1.34E-07 5.49E-08 2.91E-08 1.90E-08 1.37E-08 Page 25 of 26

002N4207-NP Revision 1 Non-Proprietary Information - Class I (Public)

6.0 REFERENCES

1 NEDO-32740, General Electric Nuclear Test Reactor Safety Analysis Report; August 1997.

2 Ben Murray, NTR Stack Release Limits, January 16, 1980.

3 Regulatory Guide 1.145, Atmospheric Dispersion Models for Potential Accident Consequence Assessments at Nuclear Power Plants, (For Comment), August 1979.

4 Regulatory Guide 1.111, "Methods for Estimating Atmospheric Transport and Dispersion of Gaseous Effluents in Routine Releases from Light-Water-Cooled Reactors, Revision 1, July 1977.

5 NEDO-21209, RALOC Code: Radiological Consequences of a Loss-of-Coolant Accident (LOCA), March 1976.

6 GE Letter, B.M. Murray to Marvin M. Mendonca, June 1, 2000, NRC ADAMS Accession Number ML003721506.

7 NRC Document NUREG/CR-2919, XOQDOQ: Computer Program for the Meteorological Evaluation of Routine Effluent Releases at Nuclear Power Stations, September 1982.

8 P.S. Webb, Joint Frequency Tables From VNC Meteorological Data for the Years 1976 and 1977, May 9, 1978.

9 Regulatory Guide 1.23, Onsite Meteorological Programs (Safety Guide 23), Original Issue, February 1972.

10 NEDO-12623, Environmental Information Report for the General Electric Test Reactor, July 1976.

11 AEPD-4444-A, Summary Safeguards Report for the General Electric Nuclear Test Reactor, October 1, 1968.

12 GE Hitachi Vallecitos Nuclear Center, Facilities Maintenance Procedure 3.11, Revision 2, February 17, 2010.

13 GE Hitachi Vallecitos Nuclear Center, Nuclear Safety Procedure 9200, Revision 2, March 2007.

Page 26 of 26