Search results

identify the steam generator being inspected. Category B-Q IWB-2500-1 Item Steam Generator Tubing Component To Be Examined Comments B16.10 B116.20 Steam Generator

welds, steam generator tubing, and component supports and Sections 4.4.5.5(b) and 6.9.2 of the STPEGS Technical Specifications with regard to steam generator

steel steam generator feedwater ring and supports, and secondary internals exposed to treated water in the Steam Generators. The Steam Generator Tube Integrity

The piping between the RPV and the steam generator is called the “hot leg.” The piping from the steam generator to the reactor coolant pump and back to

The piping between the RPV and the steam generator is called the “hot leg.” The piping from the steam generator to the reactor coolant pump and back to

welds, steam generator tubing, and component supports and Sections 4.4.5.5 (b) and 6.9.2 of the STpEGS Technical Specifications with regard to steam generator

welds, steam generator tubing, and component supports and Sections 4.4.5.5 (b) and 6.9.2 of the STPEGS Technical Specifications with regard to steam generator

thinning of the steam generators. This program is applicable to the steam generator tubes, plugs, sleeves, and secondary side steam generator internal components

procedures. A.1.37 Steam Generator Integrity Program The Steam Generator Integrity Program manages aging effects for the steam generator tubes, plugs, sleeves

3 of 7 A1.8 STEAM GENERATOR TUBE INTEGRITY The Steam Generator Tube Integrity program is applicable to managing the aging of steam generator tubes. plugs

the steam generator tube-to-tubesheet welds will be scheduled concurrent with eddy-current inspections of the steam generator tubes. Steam generator tube

The steam generator is the component between the high pressure primary loop and secondary loop of a PWR. There are two, three, or four loop steam generators

example, if a single component failure (generally not reportable) occurs following a reactor scram (reportable), describe the component failure in the narrative

boundary components with known or potential susceptibility to PWSCC, excluding steam generator tubes, which are specifically addressed by the Steam Generator

body of valve 2MS-465D [EIIS "A" steam generator [EIIS Component Code: SG] steam line flow transmitter [EIIS Component Code: FT], 2FT-465. The inspection

Corrective Actions 3-5 3.5.1 Steam Generator A 3-6 3.5.2 Steam Generator B 3-7 3.5.3 Steam Generator C 3-7 b'O 3.5.4 Steam Generator D 3-7 3.6 Certification

J-nozzle that is a steam generator (SG) secondary internal component, and therefore it should be addressed with the Steam Generator Tube Integrity AMP

INTACT LOOP STEAM GENERATOR UPSIDE COLLAPSED LEVEL 5 INTACT LOOP STEAM GENERATOR DOWNSIDE COLLAPSED LEVEL 6 INTACT LOOP SUCTION LEG STEAM GENERATOR OUTLET COLLAPSED

33 of 42 A.1.37 Steam Generator Integrity Program The Steam Generator Integrity Program manages aging effects for the steam generator tubes, plugs, sleeves

BE component models important for steam generator liquid holdup and core uncovery were replaced by their EM component model counterparts. The steam generator