RC-03-0197, Resubmittal of Request to Use Alternative to ASME Boiler and Pressure Vessel Code, Section XI (C-02-3202), RR-II-9, RR-11-9, RR-II-10, RR-II-11, RR-II-12
| ML032690223 | |
| Person / Time | |
|---|---|
| Site: | Summer  |
| Issue date: | 09/16/2003 |
| From: | Byrne S South Carolina Electric & Gas Co |
| To: | Document Control Desk, Office of Nuclear Reactor Regulation |
| References | |
| RC-03-0197 | |
| Download: ML032690223 (111) | |
Text
Stephen A. Byrne Senior Vice President, Nuclear Operations 803.345.4622 September 16, 2003 A SCANA COMPANY RC-03-0197 Document Control Desk U. S. Nuclear Regulatory Commission Washington, DC 20555
Dear Sir / Madam:
Subject:
VIRGIL C. SUMMER NUCLEAR STATION (VCSNS)
DOCKET NO. 50/395 OPERATING LICENSE NO. NPF-12 RESUBMITTAL OF REQUEST TO USE ALTERNATIVES TO ASME BOILER AND PRESSURE VESSEL CODE, SECTION Xl (C-02-3202)
RR-11-9, RR-11-10, RR-11-11, RR-11-12
Reference:
S.A. Byrne (SCE&G) letter to Document Control Desk (NRC) RC-02-0191, dated October 30, 2002, Request To Use Alternatives To ASME Boiler and Pressure Vessel Code, Section Xl, RR-11-8, RR-II-9, RR-1l-10, RR-11-11, RR-11-12 In the referenced letter above, South Carolina Electric & Gas Company (SCE&G), submitted a request for relief from performing examination to the criteria of the American Society of Mechanical Engineers (ASME), Section Xl.
A meeting between the V. C. Summer Nuclear Station (VCSNS) NRR Project Manager, the NRC technical reviewer, and SCE&G was held on August 8, 2003, at NRR offices. The technical reviewer discussed several issues with the requests submitted by SCE&G. SCE&G was requested to withdraw and resubmit RR-II-9, RR-11-10, RR-11-11, and RR-11-12. RR-11-8 was in the approval process.
This letter provides the resubmittal for RR-II-9, RR-11-10, RR-11-1 1, and RR-11-12.
SCE&G hereby resubmits the attached requests for using alternatives to the examination requirements of ASME Code, Section Xl. SCE&G has determined that the proposed alternatives will provide an acceptable level of quality and safety.
Detailed descriptions of these proposed alternatives, including bases for relief, are included as attachments to this letter. SCE&G requests NRC review and approval of this request by October 1, 2003, so that appropriate changes to the VCSNS Examination Program can be completed to support implementation during refueling outage 14 (RF14), currently scheduled to start October 11, 2003.
SCE&G I Virgil CSummer Nuclear Slation . P.O.Box 88 - Jenkinsville, South Carolina 29065 .T (803) 345.5209 .wwwscano.om
Document Control Desk 0-C-02-3202 RC-03-0197 Page 2 of 2 SCE&G is submitting the attached relief requests in accordance with 10CFR50.55a(a)(3)(i).
Should you have any questions, please call Mr. Ron Clary at (803) 345-4757.
Veryr yours OASrA. ~y&~
t pen A. Byrne V' &/oA 6 JWT/SAB/dr Attachments (4) c: N. 0. Lorick N. S. Cams T. G. Eppink (w/o Attachiments)
R. J. White L. A. Reyes K. R. Cotton K. M. Sutton A. R. Caban NRC Resident Inspector NSRC RTS (0-C-02-3202)
File (810.19-2)
DMS (RC-03-0197)
Document Control Desk Attachment I 0-C-02-3202 RC-03-01 97 Page 1 of 3 South Carolina Electric & Gas Co. (SCE&G)
Virgil C. Summer Nuclear Station (VCSNS)
Relief Request RR-II-09
Subject:
This relief request provides alternate requirements for the inspection of piping welds required by ASME Code, Section Xl, 1989 Edition (henceforth Section Xl).
Components:
ASME Code Class 1 & 2 piping system welds requiring ultrasonic examination.
Code Requirement:
Table IWX-2500-1 for Examination Categories B-F, B-J, C-F-1 and C-F-2 requires piping welds to be ultrasonically inspected each Interval. Each selected weld is required to be inspected essentially 100% of the required volume. ASME Code Case N-460 qualifies the ultrasonic examination when at least 91% of the required volume has been achieved.
Relief Request:
Relief is requested from achieving 91% of the required volume during performance of the ultrasonic examination when component design and geometric limitations preclude a complete exam.
Alternate Test:
To the extent practical, the weld required volume and base metal area, Figure IWB-2500-8 as an example, will be ultrasonically examined. Each weld with less than the allowed 91%
coverage shall have a detailed description of the beam angles used and the extent of coverage achieved. For welds identified in the table presented in the following Basis for Relief that do not achieve the volumetric percentage specified, a relief request will be submitted.
Basis for Relief:
VCSNS is presently required to perform component inspections in accordance with the 1989 Edition of ASME Section Xl. The general design of the component surfaces may have ultrasonic scan interference caused by inherent manufacturing geometry or obstructions that preclude access to the weld area. Examples of these piping configurations are valve bodies, pipe fitting transitions, nozzle radius transitions, nozzle reinforcing pads and non bolted obstructions. Each selected weld shall be examined to the maximum extent practical to include the use of multiple angles and beam paths.
Document Control Desk Attachment I O-C-02-3202 RC-03-01 97 Page 2 of 3 Examination of all accessible areas of each selected component ensures the integrity of the component and provides an acceptable level of quality and safety. Specific welds, including the limitations identified through previous examinations, requiring relief are listed in the table below:
PERCENTAGE WELD ID CATEGORY ITEM COMPLETE LIMITATION CGE-1-4100-29 B-J B9.11 83% Safe End Taper CGE-1 -4100-30 B-J B9.11 83% Safe End Taper CGE-1-4100- B-F B5.70 25% Nozzle Contour, Safe End Taper 31 DM CGE-1-4100- B-F B5.70 25% Nozzle Contour, Safe End Taper 32DM CGE-1 -4102-7 B-J B9.11 50% Valve contour CGE-1-4200-23BC B-J B9.31 81% Branch Nozzle Contour CGE-1-4200-26 B-J B9.11 83% Safe End Taper CGE-1-4200-27 B-J B9.11 83% Safe End Taper CGE-1 -4200- B-F B5.70 25% Nozzle Contour, Safe End Taper 28DM CGE-1 -4200- B-F B5.70 25% Nozzle Contour, Safe End Taper 29DM CGE-1-4300-27 B-J B9.11 83% Safe End Taper CGE-1-4300-28 B-J B9.11 83% Safe End Taper CGE-1 -4300- B-F B5.70 25% Nozzle Contour, Safe End Taper 29DM CGE-1-4300- B-F B5.70 25% Nozzle Contour, Safe End Taper 30DM CGE-1-4502-13 B-J B9.11 50% Pipe to Tee CGE-1-4503- B-F B5.40 90.4% Nozzle Contour 46DM CGE-2-2554-5 C-F-1 C5.1 1 88% Elbow to pipe CGE-2-3010-15 C-F-1 C5.21 82% Elbow to Valve, One sided Exam CGE-2-3011-34 C-F-1 C5.21 81% Elbow to Tee, One sided exam The accompanying drawings, sketches, and previous examination results are provided as supplemental information for this request.
Implementation Schedule:
The proposed alternative is requested for the second 10-year inservice inspection interval. The second inservice inspection interval is scheduled to end on December 31, 2003 with the final inspection outage, Refuel Cycle 14, to be implemented starting on October 11, 2003.
Document Control Desk Attachment I 0-C-02-3202 RC-03-0197 Page 3 of 3 Sketches, Drawings, and Inspection Information For RR-II-9 CGE-1 -4100A UT Data sheet VCSU-1394 Sketch 12148 UT Data Sheet VCSU-1403 CGE-1-4102A Calibration Data Sheet UT-VCSU-RF1 3-2002-003 CGE-1-4200A Calibration Data Sheet 99UT-013 Sketch 12150 UT Data Sheet VCSU-1404 CGE-1-4300A Sketch 12149 UT Data Sheet VCSU-1395 CGR-1 -4502 Calibration Data Sheet UT-VCSU-RF-13-2002-002 CGE-1-4503 Calibration Data Sheet 99UT-001 CGE-2-2554 Calibration Data Sheet 99UT-020 CGE-2-301 0, Sheet A Calibration Data Sheet 99UT-009 CGE-2-3011 Calibration Data Sheet 99UT-015
Ps/
6063Ati-9 . Raytheon Enaineers £ Construct20rat 4< t MATERIALS TESTING AND EXAMINATION SERVICE ULTRASONIC CAUBRATION DATA / PAGE I OF..
PROJECr = '5 DATA SHEET NO. -05a - DATE P 9 SYSTEM r _ PROQCEIRE Swr6 - oJ7 69 - I M. O COMPONENT OR WELD IDENTIFCATION EMP GAUGE ID RECORDABLE INDICATION 4q( 13.0377 __l rofhJ~otd e $e3>
Sr£^~~~~~~-p kf~~~~~~ 3O7 J.Z
sntXM GOA?16"m C gJ CA S 64F ,30377 ____
____________/A _______ i/A 41A Ait 19IAl CAL BLOCK NO. hLA
/ ._THN _ jj jl '4 NacYCH E EXAM COVERAGE ID 00 OMWHAZ 90°BASEMATERIALTMAXIALgCIRCUMFDERENTIAL SIZING OTHER EQUIPMENT DATA SEARCH UNIT INSTRUMENT Manufat uM -anufacturert-i A..M 6/VaLY E All e-Wtle QZ4M of Shgie 4uah Saw No. /'(P- -Cable Length 't 5 SewW No. (Ca 14 S Freq!J ;; Rejet fi' sike(s) - {;I qA, . RepERrate Dangtaq Angle Mode £CAAs3/T'7'O1.4L- dBEaun: Coarse A/A Fine 73 Couplan chNo. 129YOX-1 - Pdrnay Reference Response
- % Full Screen Height ki" rplint~hNoud.
A6 7 DAC FLOTTIME AM, PM CAUBRATION CHECKS 100 - _ AMPL: 2M%(d) SWEEP+ 10% OF go L ~~~~~~~~~~~OF 1NITAL AMPL INITAL LOCATON 8 _TSM; _
YES NO YES NO
%-FSH so -_- _ _ _ _ _ [ g
.- ' l __l_AA 201# # M# ~ ii a B :LEVEL DATE&
0 _ _-
- - - - U ... 1A1,EVEL' DEAITE "
0 12 3 46 6 7' 8 9 10RVIWD/
SCREEN SIZE: 6 2. 4 AfO7EDI enpAL nR7MARKS atn resv*srJnoDACsu A ,VqT £ DAT /
kxStoefem= lDreffcbr wafonndmr;de aov A~ll = DATE X/,~r_1 ADDITONAL REUARKS DXCcXzm Z 0 CD--leA r&AAI aw" d ro a- J cc CO.Af X M4T 4?V 40A AedB C"X"ze77IE Cr.41*WAS=rW IS Z,.e/l= &PR
'7 Va777ffVAV&r #421 LVAMWAC, ZlI7XwVM 4r V* Ao= Cl 4-WLzb a I yx " JA AWU S.*Z ac 0r "Arr.Z;F e4,
V.C. SUMMER REPLACEMENT STEAM GENERATOR CO[3Y U & V. NOZZLE TO SAFE END WELDS aj5--'fioo'- Y6G 40001-U-IR & V-HR, NOZZLE INSIDE RADIUS
I
-Z Equipment Module C , , ,.,I[7-5)7 --
Edit View Report Module Facility utility Options le ' h Equipment XSGO002A Alt Id : Owner : VCS Name STEAM GENERATOR A Dept... : 243 Type... HTEXC HEAT EXCHANGERS, COND., C EPIX: Y Status..
Group... : ~~~~~criticality ....... :
Unit... : 1 PLANT 1 Maint Area ... :
System... : RC REACTOR COOLANT Func Sys... : RC Account... : 5300000 MAINT REACTOR PLANT Validation : U Unknown Parent... Building... : RB Floor... : 412 Rpr Spare? N Cost Roll? : Room...
Loc Desc RB-412-290-32RB412-03-2 Description VERTICAL U/TUBE INSTALL & REMOVE SCAFFOLDING Safety/ISO?:
REMOVE/REPLACE INSULATION IN SUPPORT OF MWR-88M0 003 REF:CMP0100.009 Notebooks? : N BOM...
Specs? 1y Vendor... : W120 Asset Num Mfg... : W120 Make Dwg? : Y Model : DELTA 75 Serial Num : 12148 Size : 42SOMBH Alternate Equipment Id.
o(CDP 6063AMA4 5Bay*thn Engln*am & constuctars / i MATERIALS TESTING AND EXAMANATION SERVICES PAGE ULTRASONIC CALIBRATION DATA -
PROJECT - DATASHEETNO. "6U DATE it SYSTEM AW. 30_PROCEDRE EC -4 - - REV.
COMPONETOR WELD IDNFATION TP GAUGE ID RECORDABLE ICAI1ON C(31 -1. -, tlooA- 2!j 73 3 X t me3 - .L -4 looA
- 3 73eF td30 33 #jp I CALq_74 ELOCK .2NO. %- A CAL BLOCK NO. 971 222 .Th S,
.. ZQ.. FoB p3O3 NTCHEd SDW
&/D 12O0D) I&OPWHAZ 2"0- BASEMATERIAL A=E d gAXL CIRCUMFERENTIAL SIZING OTHER EQUIPMENT DATA SEARCH UNIT INSTRUMENT Manufacturer kB Manufacturer Modaeli C. %Mtn 3f Wa.2Attvtt -)P la jiDtal SerwiNo. - oi( r ca1h e SedNo. FO4000 Frequency I Reject Slze(s} S#Fe ....
Rep Rae ...........
4 A" lZ D i r -aD Angto Mode dB Gain: Coarme FtAm Fhs Pimary Referince Response CoupiAnvLiBa h No . kpltude - % Ful Screen Hetght I; 67 DAC PLOT-TIME AM, PM CALIBRATION CHECKS 100 AMPL* 20% (dB) SWEEP + 10% OF so - -- - - - ______ OF INmAL AMPL INITIALLOCATION 8s - - YES NO YES NO 7C- - -- ~~~~~~ ~~~~li/to
%FSH So - - - - _- - - _ r I
2c -A LEVEL -mATEL4
- - - ~~~~~~~~~~~~~~TI-ALEVEL .- DA~TEAD-av
_ _ _ _ _ _ _ ~~~REVIEWEDBYA 10~~~ ~ ~ ~ ~ ~ ~ ~~~.
SCREEN SaEnd . 2md , DATE ADM nlhpsrfam* oxwnas MnoDACis - ,<u- f kxkatersterrgnfcforklbstdonandalr~pttesboao ANII dgd&&Z/a DATE/,"-/>-0v ADDITORAL REMARKS *-. ofTS A'ICOaCD 72 MAfAIN77N &ACA& X-Z477ZW A7- 70 % fS.W 3TC#AAA/fZ0 4'W A-4Z /k X.10e., WACt0, *qN, IN' dR0,rA 0.P ZWI*'M7~74 OM .S4FW ffM ZA-.6X 4'6ef~~4DA7X Yh'7J-0=rlQ9IM4 JO/lAm OA' AM.f4Zq/ .SACE Id/.S- lv&WWAZ aW X-Zk CqMDfNLV (A'pP~~ 7W2CKC WEWD .7ZTk ).
06 ll~~~~~~~~~W
- G?3 1
-. U
Aw,--,,
.051 6063A/l-00 Raytheson Engineers,& Constructors P .
MATERIALS TESTING AND EXALMNATION SERvIl r- LP V;U Sa-W ULTRASONIC CALIBRATION DATA PAGEJO .
PROJECTJ-e- 50MMI4PR. 0F9~ - DATASHEETNO. ifrSq : D4ATE 09 q 3STWM '2 C AWE9p gcD 3I-o .PROCE~tJREZ=-EG - f E6 _RIEV. -CL COMPONEIT OR WELD IDENTIFICATION TEMP GMAIGE ID RECORDABLE INDICATION MA BLOCK N0.Qr - CC) 2 THKV LCA2- 1O I ZO 3A NarmH~j~ SW~
EXAM COVERAGE 160 M~OOD 4WO WHAZ %L0- BASE MATERtAL R"A'XL~J A0"CIRCUWERENTIL ASIZING 14 OTHER dA EQUIPMENT DATA SEA CH UNIT -INSTRUMENT Manuwfactrer~m& /7PI 2q t0:387 Manufacturer -27WYEL£Y Model l/
swe ALP A I.Simle a-Due] SedaING. Gvifi0S; t;, & 5 SeriaJNo*Glz- &/
C2496q Frequeny Itt0AW~c Cr 6Ske~s) - LO b dU L Freq. LO RepRale!. - Darr wa Anga- 4e - &
Mode .E Gain: Coarse Al U Fin
."Ov IJTI- ~~~~Primary Reference Response Couplant Uzw &&-aJ No. (6 A-40St -- tude*%Full Screen Hiht eIg d J l 7-V DAC PLOT-TIME t2JI AM, PM CALIBRATION CHECKS 1 -0
- AMPL: 20% (dB) SWEEP+ 10% OF go OF INlITAL AMPL INITIAL LOCATION o - = : -nME YES NO YES NO 70 - - _5- 7 , -4 1-40 2 345 i 10 _ E DT g 20 _-0W _ _0
___== - --
_?_~~~ &C:ALEVEL D AT & t 5 RO__ _ ==~- = REVIEWED: BY.
0 1 2 3 46 6 7 E9 10 DAT l1lL4 SCREEN SIZE: +/- D lfP 2. DATE M:TE When pedofrh-ag aoninor Ifiere a DACkm reqdl.e4 kfcale refrencereflectorlfcation and aqtde above. ANtI DATE / fZA ADDITONAL REMARKS X£4M2 /.7e.A977aM &O3~r F4IC AX/f.41. AMO alZC XCXU/S 0t/UE TV NO0 4W do.C AqX/AI. WOMC7 'I A /fl 44124-T774 .ZSL0eX.
MfA/A'm/IA/E NO/.-Se 4ZVAC4Z.= se4' -20% Ir5 d.
0 45 -b0 i:M CAW.1,Vq7742V 1 cZ-qq C£ OW -/O MW,.C' qjao 3T/30
43~~4;.\ , ~t-psie 6063J-0 layffeon Enalmars &Constmetrs t U[
MATERIALS TESTING AND EXAMINATION 5ERYICES ULTRASONIC CALIBRATION DATA PAG OF PROJECr V- SOMMER RE2 DATASHEETNO. / r ° DATE Vid-fi SYSTEM P fAJP- RC 9*'3 P DURE3 -LL 1 RE.
COMPONENT OR WELD IDENTIFICATION TEMP 6GAGE ID RECORDABLE INDICATION r-i6ag-.t -4 00A *x? nof 13035 Cr - I1 - 410A - /3o$3 - _ __-
CAL BLOCK NO.Q ' 4 D t U< .OE. f-. 1 0333 NOTCHESP- S(Ir EXAM COVERAGE ID 00 OWHAZ 00 BEASEMATERIAL AXIAL CIRCUMFRNTIAL SismNG OTHER EQUIPMENT DATA SEARCH UNIT INSTRUMENT Manufacturer KSkB 5anufacturer =V Maod I IC13 Wtfle OA /9JA POOSOShe ADuW1 .Ey M. 436- S67tyL V M Sb Aj Sedil NO. L.209gi 4 Frequency - ReJect O Sizeps) KZL X I Fre4j.25 FrHlX Rep Rate - a Fiep Rale Angle Mode m S AEAR dB GaIn: Coarsa - /A FinGe I. 1 Ait)
CCU No. aq Primary Reference ResponsekI -
Arnipltude-%FuiScreanHelgNht lb ... I0At, DAC PLOT-TIME .7CAU, PM CAUBRATION CHECKS 100 _ _ . AMPL M20%t(dS) SWEEP+ 10%OF go F _ s = _ = = _ _ _OF INTIA L AML INnTAL LOCATION 8 - J - _ nME YES NO YES NO 70- -
% FSH_50t _+
sCFSH st-_f- _*> --_ __ li;S~~~~~~n~~l) a 17 d4 Al 20 _ _ A-f _ _-- - 2 j C 1A LEVEL 7 DATE 1 r O7 ~ ~ ~ ~ 9 ~C.1ALEVELMC- DATEI-9S-101 2 34 -567 a_ REVIEWED sww I.. I - ., 'DATE_______
SCREENSe 0 2.
2 DATE A
NOME WIWenpdonrdnigexam wtmrnsrnoDACreqdue4, .
kdkcate referec wrfectcraA on and ampude r ave. ANI DATE '
ADDITIONAL REMARKS
(>,O0 E? VIL - AY ) Somt zvvgz' ^ SA eD .s O K r/eW~ 93d3/ZO
6063Afl40 Raytheon Engineers &Constructors `-+ L MATERIALS TESTING AND EXAMINATION SERVICES PAE 4OF PROJECT ULTRASONIC CALIBRATION DATA DATE -
I!,OmtAMS& *. ::o5 DATASHEErNO. m -a§ SYSTEM Z elAE2*sq3Q3C - PROCEDURE9 ZC.LCQ-1r2s ,M. Oi COMPONENT OR WELD DEWIFICATION TEMP GAIGE ID RECORDABLE INDICATION WA5 -. L-v10 -so° 7;3°y le33 SEEzta Z CALE LOCK NO. 741 I22 TTHK 6- (S 0 NOTCHES;T" S EXAM COVERAGE 0-WHAZ 'geEASE MATERlAL a16IAL CIRCUMPERENTIAL SIZING OTHER EOUIPMENT DATA SEARCH UNIT INSTRUMENT Man Iedbr a4nLAdP S7;1/0(-JM Maculrewr Ks )y-Sty4a14bL %8Sngel Seuial No. 1,96 - a AV-)
SeriallNo. lg-I Frequenc D 1 - Reject size(s) (SV _ 1 ) Freq.L.. Rep Rate I U14 Dampig IQ Angrle *c 3 Modae L jj . dB Gain: Coarse FiJn FAne1 7ddS(OMB Puimazy Refer*=c Response coeup ric.uiuaadch No. 0 5 t Amprtude - Full SCeen HeIght ItD J7Ar P! g0 DACPLOT.TIME 07015 AMPM CAIUBRATION CHECKS 100 r-_ I I I- I- _
AMPL: 20%(dBE)
OF lNITJAL AMPL SWEEP+ 10%/COF INITIAL LOCATION 8 F- _ =- = = TM _ YES NY NO 6e - - - - - =- __ J43 -/
%FSH Sc - - - - _ _ - _ _
40----- --
\ ~~~~~EXAMINERs):D 20 -- - .'~0*CILEVEL ~IDATE~
23 -- - - -- -DA I REVIEWED B 0 1 2 2 46 6
.IA:I9" 7 a69 10DTE L.1 WEEP t. DAE SCREEN SIZE: 1° 01P,4N _IP_ DATE-_4 NOTE.:,Kenpdomrrngmr~ti~ns vhrnoDACrIrequbuc I /
kma7e reference rflectorJoat and ampRude a. ANtI DATE ADDITIONAL REMARKS eZ4M M1,77,CW 7V&AM v F-0M 7Th/CK&Z j4Fe &//D
- M~~~7PC OAt V.
S'3 L. AC SC 3 IY .
'5/
6063AA-40 Rayhon Engineers &Constructors Cj (, A,.S MATERIALS TESTING AND EXAMINATION SEabE ,
ULTRASONIC CALIBRATION DATA { PAGtE < OF PROJECT -4 DATA SHEETNO. - -' _Cw -DATEf0--94 SYSTEM 2 0 MMA g3 cP3/ R - PROCEDVLRE 6 *J76--?&9 / fiEYR. _°_
COMPONENT OR WELD IDENIFICATION TEMP GWGE ID RECORDABLE INDICAT11ON nLB O1L-2;-.T? _3- 13 rJNq J SEHEP mELorKNo.1974D2)2? THK 68f1 O NarHE-A EXAM COVERAGE XD SD WOOsWKAZ gEo BASE MATERIAL 0AXFAL 1t CIRCUMERENTIAL YSIZING JfOTHE R !/w EGUIPMENTDATA SEARCH UNIT INSTUMT Marufactrer 0Il577wk - m olvEf
.so1J/0 /
style h$LaLmle tMOVU2 Sedl No. /3( St0 Cabl Length 6 & 76) AL)
SerialNO. 1a S9 Frequency / 'f'Reject el Slzep )(5 X/) IG"s Freq. R RepRate o:Dafqng wrsge 7.Mode al dB Galn: Coarse -Fin. AlE LI Couplant Y-ahNo. 2V!Q I Pdrlnwy Reference Response AlArt 4
________ _________ ___ Ampltude. % Full Screen Helght i ~ !/ - 7 4!
DAC PLOT-TIME °Q UAM, PM CAUBRATION CHECKS 1 00 _ _ MPL - 20% (dB)
AW SWEEP + I 0S OF s0 OF INrTL'L AMPL INmAL LOCATION 80- = _ TIME YES NO YES NO 70 - _ _ _ _ A--
60 __ / /A
% FSH 50 - __ _ IYA 40
¢ _ 5 3 T _ _ ~~~~~~~EXAMNER(S):
I0 _0 _ A1.-I~s~zT1;
_ TC_ LEVEL DATE I- - - - - - _- 1ALEVEL - DAiTEZf
\ _ ~REVIEWED BY:fi 10-~~~~~~~~~~~~~~~~1
&vsWE It10 DATE. II1-W SCRIEEN SM-Zo t dP 2. \tATE D J NO7'E, Whaen peonring ~mA-od nSon iere no O4Cb0s nq ,_s khdath Nfefioxv W#OckaXU=5onad andoxlude abovw. ANII DATE -4 ADDITAONAL S4.C,6 -.,OV 7VP,5C(AO1W. e22)
XERS£#f/il7NOiV,
&7w/L At XsCqu
Raytheon 0 0 orv OD ."
Engineers & Constructors 3Ill SHEET O MATERIALS TESTING AND EXAMINATION SERVICES ITM OFICATMCC5 9t9 INDICATION DATA IL .% $b t:fi-aZ - I - 4 1oe A . an f UAVV- I f-04-ft",&r b -v CATMON DATA SHEET NM t*pg aga - r~ A - f _ is. .n n ; rn . .-
- 5. p
- DATA TABULATION SCAN SEAMCU tfft 0% DAC ORHMJ STRAKr BEAM ODRECllON E% LONp EXIT POqTOcATIO MAMMUM AMLIUDE R F
- - D S ne'mpm,5fflq mIpflmum PAOMJMA A
FWAN- NO. WELD) SAMe ~ EDN2PSrM~cAMM Pml~m WX(BIRloTIi4m BEAM flAL ~~~~OFWEID MP EFWIFUWU MAM aOIn BEON OWlN M .P914)o AM PUN X 3L. 3- - _ _ _ __ __ /a
-fsHSs4
=~~~~~ = _ ......
.__ _.s eS.'_ ==,_
-/ ____. _ _.____ ..................................
_ /~~~~~~~A5 14/
~-_ _ -__ .... _,....
_~~~~~~~~~~~~~~C 2c 1 P/A _/ "A
_ _-- _ m-=- - - -
_IMATK)R WDICATION OEM (W COMMENTS A~~~dft CRO QF~PMA"AOMC
- P-i ZIWZ ZiZ1A jEA F.tv &bfm tar= =CINM 'P0%%im
___ SmrGAW oca mmmt EXMWE"%- (;K:-
-TC-1ALEVE.
CONTINUATION ATTACHED 0 YES I NO
_ - _ bsy TG1A EVEL -
REVfEWEVB DATE ///V f
Raytheon 0C) , jN0- a Engineers & Constructors VeSa IW3 d 7ZOF MATERIALS TESTING AND EXAMINATION SERVICES INDICATION DATA ulp-~bo10E,edI -4.1o0A- 30 Ceob Lpc .""e m-^2£--ATrm CALIORATION DATAMUEETNO DATA TABLULATION SW. SEARCH UNITW A OR "ALF WBM~n DIRECTION A EX PINT LOCATION MAXIM AMPLITUDE (CAL ON BACK REFLECTKO CIRCUM. plo"IDfON ...... JAW REARME fN!rAC WOPRIT.
~
S~~~~~M4 i--
~
___:N
~ ~ FEWCW MAX~Zs 25 FROM C1.7 PRM SEP t0 r%
S. WE t M~VOIG
/
MAftmJC
/A *4 Q.3 sN/% h--^ NIA
=
JI t'1 (olL 3
_=
0 .6" MWt_ 34S" #/-%A 4'=. -
I~ ~~___ _=____-
=~~ = __ =i .i __
_ - - i ._ _________ - f llon uno" oFROM&MMt~ At . .COMMENT8
____ ____ 4vej FwoM Er DogF QFt i-me %-Arr .z I -
All#
T V-1 - -
CONTINUATION ATTACHED -0 YES /~NO wif M t __
mlevIEED DY r i
fffd0=.
F F _
-_TCAL~uv'EL=1 TGD DATE IA A- *-
4.,
RFayt4eon 9p5, Engineers & Constructors B thV L,,))
DATE lo-zi-9+-
- L-S ffi
'I' SHEET OF k,--:,-T CHICO. BY "0 DATE Lq/0&7ff t NO- . </ADEPT. a OFS NA. AACEO.
CLIENT n-1 -- -.
PROJECT h te.
StOMM . -F-08 SUSIJECT We CGE -4L-41-4cA -angl a , , _ ~~~~~~~~~~~~~. ............................................
- e- - -
N
)
1581 2-88S
11%,("'0 0- -
CGE-1-4102A LOCATOR 15 Moo 2
.12w N
20 I0 13 RESIDUAL HEAT REMOVAL 21 FOR PRESERVICE AND PTREFUELNG I
SEE DWG.CGE-1-4102 2-2500 COPY
Wintrton a-Group International Calibration Data Sheet Pae / of
- f^01 GINIAL Plant V.C. SUMMER Isometric: CGE-14102A V I Component/System: RESIDUAL HEAT REMOVAL /A-L Lvr COPY1116 DaSheetNo.: UT-VCSU-RF13-2002-003 Procedure No.: SCEG-UT-89-12 Rev. No. 0 Add. No. N/A I I I I I I- Cal. Block No.: CUE-5 Instrument Settings Search Unit I I I I -A k1, ,- - Dia.: 12.0" Mark S/S Manf/Model: STAEVELY / SONIC-136 Maufature.rKBA I I I- f" I Cal Block 'r: 1.078" ScopeSerialNo.: 136P1106C031380 Serial No.: OOT53F I I I I I Cal Block Teip: 74 °F Delay: .351" Range: 3.0" Size: .375" Shape: ROUND I I I Tbumometer SN: 221922 Velocity .127 in/us Pulser 222 ns Frequency 2.25 Mhz Style: COMP-O I I I Cal. Direct: 0 Axial E Circ Damping: 500 n2 Reject OFF Exam Augle: 45 DEG. Wave Mode: SHEAR .I I I - - - 0 Both Rep. Rate: 4 Khz Frequency: 2.25 Mhz Measured Angle: 43 DEQ. I I I I I I F-J- F Scan Directio:
Filter 2 Mode: P/E Wedge Style: LUCITE I I I Ref.Seas: Ax 29.8 dB Circ: 29.8 dB I I I. I [X]
o Pap to Weld WRV 0° o Parallel to Weld L minar 00 ExamSeas: Ax: ' dB Circ: dB Couplant o Inner RadIus 0 Other SDH Sensitivity: N/A dB Type: ULTRAGELI1 Batch No.: 01225 Each Major CRT Division - .30 " CRT Calibration ln:
0K Sound Path Q Depth Daily Linearity Verification Search Unit Cable Eamnlatio Surfai:
Instrument Vertical Linearity dAccpt. 03 Unaccpt Type: RG-174 O I.D. 0 OR Amplitude Control Linearity: Accpt UnaccP Length: 6' Conn No.: 0 Surace Coaditlos: SMOOTU Conligurstiont CRV Sketch Recordable Indications Item Thrmometer System Simulator Check Examination Area/Weld Access Yes
_,vcW No p--o Temp. Serial No. Amplitude: 25% Gain: 29.8 dBs 1-4102A-2 PIPE/ELBOW YES X - 0 OF 221922 Sweep Position: 3L6 1-4102A-5 PIPE/ELBOW YES _ X - 80 F 221922 System verification when recalling stored calibrations wad/or afler each examination:
1-4102A-7 PIPE/VALVE 8702A YES X 8 110F} 221922
! Yes O No O NA Retnarks/easonsfor hicoiplete Scas)
- SCANNED AT 5%TO 20% ID ROLL Insrumnet Cal # I SCANNED FROM PIPE SIDE ONLY ON WELD # 1 4102A-7 DUE TO PIPE TO VALVE CONFIGURATION. CaL Checs Time Simulator S/N: .Ad..40 . Initial Calibration 0908 Initial Calib. Date 5/6/2002 Lvel: -IC Dat:S -a Intermediate 1102 Examiner <o -v- 2- a Level: - Date: 5 C- 4 2- Intenmediate 1137 Reviewers/lcvel: (WGI) I- Deb: 0 Reviewers:(Client) X Dale:.4W5l0 Final Calibration 1255 Reviewers: (ANII) W"4a Z Dat:j 7Further Evaluaton Required O Yes (&No Final Calib. Dte 5/6W2002
Washing.n Group International Calibration Data Sheet page Z. of Plant V.C. SUMMER O RI(a-1NAL Da ShectNo.: UT-VCSU-RF13-2002.003 Isometric: CGE-1-4102A Component/System: RESIDUAL HEAT REMOVAL / A-L _,W.u COPY ProcedurcNo.: SCEO-UT-89-12 Rev. No. 0 Add. No. N/A Cal. Block No.: CGE-5 Instrument Settings Search Unit Dia.: 12.0" Mal: S/S ManfiModel: STAEVELY / SONIC-136 Manufacturer. RTD Cal Block Tr: 1.078" Scope Serial No.: 136P1 106C031380 Serial No.: 98-975 Cal Block Tamp: 74 °F Delay-. .971" Range: 4.0" Size: 2(&X14)mn Shape: RECT. Thermometer SN: 221922 Velocity: .230 in/us Pulsar: 250 ns Frequency: 2.0 Mhz Style: TRIA Cal DIrection: O Axial O Circ Damping: 500 0 Reject OFF Exam Angle: 60 DEG. Wave Mode: LONG. 0 Both Rep. Rawe: 4 Khz Frequency: 2.25 Mhz Measured Angle: 58 DEG. Scas Dlrectloa:
Filter: 2 Mode: DUAL Wedge Style: INTREGAL Perp to Weld Parallel to Weld Re£ Sens: Ax: 79.2 dB Circ: N/A dB O WRV 00 Laminar 0 ExamSens: Ax
- dB Circ:
- dB Couplant O Inner Radius Other __ _
SDH Sensitivity: N/A dB Type: ULTRAGEL D Batch No.: 01225 Each Major CRT Division - .40 CUT Calibration Ia:
0 Sound Path 0 Depth Daily Linearity Verification Search Unit Cable Eaaaalbo Surface:
Instrument Vertical Linearity: E'Accpt 0 Unaccpt. Type: RG-174 O LD. 0 O.D.
Amplitude Control Linearity: OLf'ApL 0 Unaccpt. Length: 6' Conn No.: 0 Surface Condition: SMOOTH Configuration/ CRV Sketcb Recordable Indications item Thermometer System Simulator Check Examination Area/Weld Access A-tached Yes No GeonL Temp. SCrial No. Amplitude: 80% Gain: 70.0 dBs 1 4102A-7 PIPE/VALVE 8702A YES X 80 F 221922 Sweep Position: 3.s 1~= = -- System verification when recalling stored caliblations and/or aftr each examination:
I~~ _==I_
Yas O No O NA A^, b~~~~~s-,AWT .~~I Remarks/Reasons for Incomplete Scan(s)
- SCANNED AT 5% TO 20% IL)KOLL. Insrument Cal ,
SCANNED FROM PIPE SIDE ONLY DUE TO PIPE TO VALVE CONFIGURATION. Cal Checks Time Simulator S/N: §0f1i40 initial Calibration 0905 Wnit Calib. Dale 5/6J2002 Level: = Date: S (. - Oa Intermediate 1123 Level: :7 Dale: 5 - t( - 4e intermediate N/A A~
Reviewers:(Chient) Date: 5 d . Pinal Calibration 1300 o z. Further EvaluaUon Required 0 YesE Final Calib. Date 5/6/2002
Washington Page 3 of 9 Troup International Report No.: 41- VC5U-S(ff1-<Z-003 oj,GllAM-CONMPNENT NO.:
I- 9 /cO 7- e-Z Pt eL - Ftt 0 E5LS claw 17-CL~~~~~~
) 66 7. Cab~e '~c'A'tv4GO cEc)3R4LAe fic.91*456 TA kE #%a k rl 'cr SI E IZ & bt %a5 6 F EI Sa t-.
Comments: N I -' e Date S/ I I
IWashington
-PI Pe - - e4atu
>77
. an 0 p&
A c. (' , a 3E z T1k66,0 a-li- b.-r r ,E 012c-1 IaOG e OF r~- ca6 & Q Comments: N t " e
"..._.,/ I pvel Eyxaminer I . -
HAJ~
_= _
t V .-
6- 7 R
-A Lj-*r at _______/.0z u (gAai n I lmoxjl </Ir r
FW"' a-sIhingtOn..1 wroup InternatiO I
COWpONMENrNO.
p I Pe- Ftb --1 \I jLVjE-
.- Aeu AT 7-- .C cot0m~fts N f4 ME D-St at C X
vk _A Axwymon W Eugineers & Constructors Calibration Data Sheet Page 1 of L su e . U;;I--9r Plot:__V _ _______4 I I Data SheetNo.: g'q-rr-Grs ORIGINAL Procedur No.:
CcaiponentSmstau: -L 50i"jsc~i C 00jec7V0 J Th Z-.S" ?Pf?97 .
Rev. No. I Adl.No. __
Col.BlockNo.: (Cb E-O'L Instrument Settings Search Unit Dia.: S-" ari.
Ml: S Mf.Model: : S Maaifctwver: I e 6Acb I CS CalBlock T:____._6 __
SCepe serial No.: l;5 -,s _ Serielwo.: KICZ SI Delar: -. I !YL Range: *1. p15 size: iSSpe: ___ _0___
_ _1 --_r -t-/ ----r -1 Cl Block Temp:
ThennomeferSN: I9 4k S e IF Velocity:.-tLinhis Pulser Z . ?t no Frequency: 22S4SA8tyvle: A Cal. Direetion: [3Aial Circ
- L-1 Dunping: T-f¢ Reject: 0 ExamAngle: _ Wave1 Mode: 2hitc 0 Both Rep. Role:ZKY Prequency: Z
~ - t.I Mesred Angle: _______
Seen Direction:
Fmrer.L Mode: P. £. WedS Sw: P-45W - C ----- '1'1 'I -7 P-rerp to Weld 0 Parallel to W Ret Seae: Ax: Z7 dB Circ:__ dB O WRV 0" O Laminar" Exam Sena: Ax: JIB Circ: A/ dB Couplant ° Inner Radius ° Other Type: 64- b7IZACX BadchNo.: 4S 2S Each Mqor CRT Division - -1 CRT Calibration la:
E 0und Path Q Depth Daly Lilnearity Verlation Search U It Cable Examin" Swrce:
elsutme Vertical inearity: IAcpL ClUnaccpt Type: i?6 1 L/ [ LD. E3.D.
Anplitude Control Linearitr. U-Mp5L O tynacept. Lngth: I CoMNo.: ____ Sgmface Co"ad"s 6efawwb FL 4 Contiguralond CRV Sketch Recordable Tndications Doem Thenmonieter System Simulator Check Examination Area/ Weld Acce** Attached Yet No Ge Temap. Seoula No. Amplitude: L%
E asin: Z7.0 dB Sweep Position: / 6 8yrbm verification when recalling stored calibrations and/or adier esah .xaminalior 9-< ~to E NA Rewirks/Resoonfor mucompeto 8404) - buewCa Cal. Checks Tinie "Jo P5-TW,4r OCPJ D44Z e Sp N tm caJ~Cfe-IrJ co-Or gctA m~mJ Initial Calilration , 0 08C0 Initial Calib. Date Lq_(, - 7 17 C.WIUS * -~ I _1Lv0l: _ Date: -St_1 -9 Ti bitennediate 6I 55 I .17 C.Rinu....*~i.
- Level: Dole: 'Afi - 9I / Utennediue W f./
Reviewersl 0 t,.r G49 Reviewers: (Cli Ft he- ao . , : Final Calibration / 7..I S-SRMiers: (ANUz 71 ',) <gg/5 ~~Further Evaluation Reque es IN FinnJ Calib. Date I __ t_____9 I
11 21 1111111' 1 RaytTIon Elgineers & Constructors Calit oration Data Sheet Page 2- of Plet: V.C. 5Elm £.U._
Ismnetric: C6 i- ( - ' c0o A C
)RIGINAL CQ-i7P Data SheetWo.:
Procedire No.: J C _ q- __ _- Coposen/System: (." iAs. C Coo ECL_7? D tf7.S5'7PIPE Rev. No. I Add. No. I Cal.BlockNo.: C e l-ae '-0 I b mgfl Mnt'l: 3/
Instrument Settings Search Unit Di.: 2Y1.5" Mut/Model: wiaLksJjC Maniftaclirer: 14 IE rSa C _JI CRl Block 'T': _ O Scope Serial No.: I ___ Seriall}J.:-- 1% 1 Cal Block Temp: _ jF Delay: .L /5T _ Range: _ S.oe" Size: _ Shape:
s__ R Thernnometer SN: 1 Velocity: , IjMis PuIser. 2.'LZ nfs t Frequency: U,! A4I 06tyle: _ t -- - - ~ ~- I--I Cal. Direction: El Axial 36irc Dmping: 0n Reject:6 1 _ ExantAngle: _ __ Wave fode: 5AfC Ol Both Rep. Rate: - Frequency: ?.2,S, *a Measured Angle: av-L5t/sY Stan Direction:
23~Paraflet to We Fiber I Mode: R li. Wtdq Style: ZJ S WJ- C O Perp to Weld Ret Sens: Ax: I dB Circ1'l d% . 4 dB n MEV l Laminiar ExaSowns: Ax: A dB Circ: L dB Couplant D- Inner Radius n Other _l1.
SCH Sensitivity: dB Type: I obufAtZ Batchwo.: q$3'-2. Each Major CRT Division - , w CRT Callhrsta nl:
tel'Mmd rath El Depth Exanilamthw Surface:
Daily l,inearlty Verification Search lJ it Cahle hintnent Vertical Linearity: 0<cpt. 0 Unaccpt. Type: 1Kh T onNL LI LD. O.D.
Surface Condition: y Amplitude Control Linearity: [3Kcpt. 0 UTnacpt. Lengt: CNno.: .i-com A4i Configivation/ CRV Sketch Recordle Indications Item Thennometer System Simulator Check Access Attached Yes lNn Geon Temp. Serial No. Amplitude: 4 % Gain: rtI dB Examination Area/Weld tt 0 Fp _m~ Sweep Position: w*Z I-'4tao A- t 36c. aBs~cll ceJ rop. A/C ---b System verification when recalling dtored A- t3 5C- -~ - o calibrations and/or afder each examinatioll E 3s'; E Nno IINA
_ =~Intan Cal ____
RetWlks/Remaons for Incomplete Scnn(s) tmment Cal _C Tite-1D ScAtj orb *CpIwCliJ 8 cC JFif.L&trnj. Cal. Checks Initial Calibrlation Initial C(sil. Date 4- , '7r -7' Leel.~ Date:
Level: -A Date: N1'7-7-1 I Intennediate Exeininer. , P -42 7 rntennediuute P.2uniner- /III/
Level: 4j1IL-
. Dude:
t a - -l _ _y ,s,,
111.v i s i/ ..
Date: 4 i Finil Calibration I IL ?tO Reviewers: (4ttzythn) )AJ0i4 gu Reviewers: (CliReqiree 7
nYesE4Qz 1-07 g Further Evalutbn Required Final Calih. Date 91)
Reviewers: (ANII) Ag?7
RaytM~rn -- _ ___ -- w Eugineers & Constructors Calibration Data Sheet Page 3 of A
% e, -
Pi Y:_V.C. S&g. , rI \, If Data SheetNo.:
Itic66I- qzo I ORIGINAL - LI' 11.1 Procedire No.: S-6 8?-
Cowment/8yslems: 013P AA14P 4ONA04M M TlO 2 7 5 :PTE " Rev. No. I Add. No.
_ I I_ I I I Cal BlockNo.: C46E1 go Instrument Settings Search Unit I I _ I_ I_ &,; H,, Dia.: Z7. Marl: 51/
Mu/fJModel: 67,4 V L /J 15d e/r MRanofaCturr: Svic C _ I _ I I __ Cal Block T:
Scope Serial No.: SerialNo.: 4/0Zz Cal Block Temp: O F
Ddqe: _L795 Range: Soo Size: 2 C, 5 Y.. ) Shape: e * /if6-1 _ I I I Thermometer SN: __ __ __
Velocity:. in/b Pulser: tfa Frequency: 38 style: . & C) I I I I Cal. Direction: Er Axial f Circ I I I I O Danping: 5o0 0 Reject: O4F Ex unAngle: q5f Wave Mkode: tL4or Both qk1#& Z. ZS YS5 -
I I I Rep. Rdie: Frequency: Meauved Angle: Seen Direction:
_ __ _ _ _ _ _II Fiber Z . Mode: Ci I Wedsg Style: _r jtEJIdA I r. Perp to Weld 0 Pirallel to We Ret Sena: Ax::4L dB Circ:.&,d dB O WRV d' E l Lniar GP EhwnSens: Ax:C^_dB Circ:&A1/4 dB Couplant ° mInnerRadius n Other SHSensitivity: /4 dB Type: L ; kQ Batch No.: ?ArLZV Each W~or CRT Division -
- 5b CRT Calibration Ju:
[ Sound Puih n Depth Daily linearity Verification Search Unit Cable Examination Surface:
blanmneut Vertical Unewrity- Dccpt O Unaccpt. Type: ___ /7qlu El LD. r O.D.
Aplihude Control Linearity: IA-AccpL n ttnaccpt. Len: 6 /, ConnNo.: 0 Surface Conditen: G .v o aOJ Configuration/ CRV Sketch Recordable Tndications Item Thennomneter System Simulator Check Examination Area/Weld Access Attached Yet No Geomn Temp. Serial No. Amplitude: ffO % Gain: -SO.6 dB' Sweep Position: Z. C Syrtem verification when recalling stored calibrations and/or after each examination:
I Yes El No 0 NA Resirks/Reaffoas for Incomplete Scnn(s) hb nt Cal Cal. Checks Time N/O S4A ON' RP~S1TE Slog To ORONOc/ ecVh0VET0A, 4ON/T4U6JI*Tao initial Cailwation C>ogo
.4 Initial Calih. Date /- 7q Level:.
IA .C Date: L( - I 7 -7 Intennediate /V) ZO EX einr: ~ -1= Level: Dnte 4- -0 Intennedilte . O/I Reawrsiuwteon) I/)UTAZ Date: 9-0f Date: a/
Reviewers:((Cliet)L 5G/ Further Evalhation Required n Date:
Yes Final Calibration Final Calib. Date ___/_
I Z.Z.!(
Reviewers: (ANM
Raytheon Engineers & Constructors ORIGINALpaejf -
Shketch She-et (Ti [7 I StZtiOflf1Jflit NC. suM project ed le-t I System C ~ ~~Procedure ---- 1--- e- - e .J d.J. a e R v._
Copinent . DN I - BC Search Unit Angle qSv Mode fflj l I I I
To-rA-L~ ArjrA OF c -kJ - q.-75'
\ AFAve'r c 5-C^i ,1' -& .'r LC11,cS - 7'
\of C ' A C VEIC- 8X¢/e .
\~~~~~~~~~~~~~~~~~~~,D SCrtJ Off efoL c ~~tt AIC A IDT OcAPJ[A'a TWO
,-'bIrCCrkP~,J Prepared By Level Date ___________
Reviewed B' Lev Date '2-ORefer to attacbed u~trasoni Cindication Data Sheet
12150 V.C. SUMMER REPLACEMENT STEAM GENERATOR 0,
Q:L2 \~2 0Q6-1-4'20o-27 0 9AVU.'r N- / 11t-U & V. NOZZLE TO SAFE END WELDS 16/.001P U-IR & V-1R, NOZZLE INSIDE RADIUS
WESTINGHOUSE NUCLEAR SERVICE DIVISION INSPECTION SERVICES g PROFILE OF THE EXAMINATION VOLUME PLANT V.C. SUMMER UNIT #1 SKETCH 12150 SYST./COMP. PRIMARY NOZZLE TO SAFE END BUTT WELD. HOTnEG I COLDLEG PROCEDURE SGE-ISI-250 REV. 0 EXAMINER .c G ' DATE f*0!VIDENT. U/ V L~i
> w 0~~~~~~
\*i4
\~~~~~~~LaA \
U
Equipment Module Edit View Report Module Facility Utility Options Help Equipment XSGO002B Alt Id : Owner : VCS Name STEAM GENERATOR B Dept... : 243 Type... HTEXC HEAT EXCHANGERS, COND., C EPIX: Y Status...:
Group... Criticality... .:
Unit... 1 PLANT 1 Maint Area... : N NON-TRAIN RELATED System... RC REACTOR COOl Func Sys...
Account... : 5300000 MAINT REACTOR PLANT I Validation : U Unknown Parent... Building... : RB Floor...: 412 Rpr Spare? : N Cost Roll? : Room...
Loc Desc : RB-412-165-32RB412-08-2 Description : VERTICAL U/TUBE INSTALL & REMOVE SCAFFOLD EXTN Safety/ISO?:
- REMOVE/REPLACE MIRROR INS.IN SUPPORT OF
- MWR-88M0004 Notebooks? : N BOM...
Specs? : Y Vendor... : W120 Asset Num Mfg... : W120 Make Dwg? : Y Model : DELTA 75 Serial Num : 12150 Size 4250MBH Alternate Equipment Id.
6 LWP zX-n; v~ r- - ,
6W6:1A40 Raytheon Engineers &Constuctors j) - fl- I MATERIALS TESTING AND EXAMINATION SERVICES ' v ULTRASONIC CALIERATION DATA PAGEi4OF PROJECT V.t_
V4 ZICJM _MER ._ 6 1ina
__ _- Af &
DATASHEETNO.
N _-_ I DATEM-W-94 SYSTEMW_ a. fAWR' C1 3)3 1 PROCEDURE (_YE - E- REV. d COMPONENT OR WELD IDENTIFICATION TEMP GAUGE ID RECORDABLEICDICATON
- a *I LJRI CGIE- _ -4220 W.F' IT CAL BLOCK NO. AlJI)2.THK .a.5 7 ?3TCHES-EXAM COVERAGE SAl.%
SIZN 4 tID POD '%0@WHAZ o-BASE MATERIAL W AXIAL f CIRCUMFERENTIAL *OTHER__'
EQUIPMENT DATA SEARCH UNIT INSTRUMENT IS 6 AIM IC, I3L MantiWruer D~ Manuf=Uer e.,4AMfMA
- MP EB'lnote Dual Sedel No. ____-_MO _Ie Lenth Ca -SI*
sedial No. C ^ Frequency IJ '4 Reject 'of Slze(s)
- a A _ zuq. Is- . Rep Rate A4 I " F Dampong -
Angle °0 -Mode L dB Gahn: Coarsme - /A Fine Primary Reaerance Response n~upbNo= fi No. oiLS7 Antud - % FuO Screen HeIgel g h t
- I W
DAC PLOT-.ME W037 AM, Pm CAUBRAMON CHECKS AMPL i 20%(dB SWEEP + 10% OF OF INITIAhL AMPL INITAL LOCATION so1' IUI I TI 1'I Ir o - - Ia TIME YES NO YES NO 8C - -~Ž~- 7 , S: All
% FSH SC -
40 1 1 ---------
11 1 T T 1 20 - - - 6 6 I I - t I 1~~~~A- EVL AZ~rATE /
- i. ._ -
IC I I I - - I REVI 0 1 2 3 4 6 7 8 9 1UI Ewup 1. 1D-1424 SCREEN SIZE:- 2. ~ ,
140TE:, IWcn pednng exfm~natfone vdimno DACIS ,qude4 hkd~cate referenc ;vledcrkxatfn and anpifUde &abov. &MII nsTw-r Lpr% I ---
A ADDITIONAL REMARKS *AS VA2eLZZA 7V MAIAIA7X/AP £3 qCC A2'4Z&'T/A0 Ar 701'f JH
..7CA.4#VA' 04W Z4&OM' "XIDEj Ie dA/1, /4 AZER O0P 61AFM/rA1av4( tWSAir £WO XCrkSZ'A PR Z707 .7Vw5~7- XVI L~. 36QV d// =_ff80W kt 3/G £41U jPcrow~ aw eztraw zwlyfD/Ata rdP-omr. vo ahrC AcOvf w44dZo neZ O0& MW.C MMf CTLY031-ri fr- 'rJGILFl
60)63AAt90 ... . . Raytheon Engiueem & Conist tmrlL~tO MATERIALS TESTING AND KAUUNATION SERVI4,E ULTRASONIC CALIBRATION DATA N-PROJECT Y, C.'AeQMME DATA SHEET NO. DTE I SYSTEM go5 131 _PROCEDURE E -QV8- 9-1EV. 0 COMPONENT OR WELD IDENTIFICATION TEMP GAUGE ID REICODABLE INDICATION A -. 1 7 IFi-O$3AlmeIli JI S M ::~~~~~~~~~~~II ° T7 MI03A CAL BLOCKNO. 9 741 ZD '2 THKlo 7.0 IF _____ ____ _ _ D EX4M COVERIAGE t(ID ErOD JKO-WHAZ _I BASEMPATERIAL PrAXIAL B 'CIRCUMFERENTIAL SIZING WOTHR sill, EQUIPMENT DATA SEARCH UNIT INSTRUMENT Manufacturer bt/- I t,?03q37 Manufactrr 57%VWL,9Y l~dz3 SMO ALP SlnRSe euaNL SodsNoA o. - S2 ( 3 LQnF A &B WM SeddaNo,.~ / C/1.2ySfg Frequenc~y RAJ£FejeclO'er me(s) / V 2br L0 RepRate- . 4 _ - L Angle 4Q° V*QA/__ dE Gain: Caere /A Fin- 8516 A)CM-ICo up Xlct W. °9 it 0OS I hPdmry Reference Respass IP -M
,il NOA
______ ______ __ An~l~tuds% FufflScreen Helght-M DAC PLOT-TiME I°qAM, PM CALIBRATION CHECKS 100 AMPL+/- 20% (dB) SWEEP +1G %OF 190 t- -tIME i
Y
. . _OF INTAL AMPL NO INTAL LOCATION YESr NO YAt%
YFH So _ef g 4t __
J~~J EXA-
=MiNER(S):
Al~~~"
ZileiIAL.-
30_ _ - _ _ _ - LEL - DATE of 20- ---- - -
=_ _ _ _ -.
_ -LEVEL
- -t DTE 5 1t _ _ - i
.REVILEWED 0 1 2 34567 8 0 SCREEN SIZE: 2. DATE NfOTE: henperfbmfin xamtonsrewnoDACd e req re4 4
hdlcat referece fectckofionandapludeo boe. ANII NI DITI f ADDMONAL.FREMARKS .AAIC C.44/ V770A1 O. PC 4X/sAa 4W6 C/C c lS CdA/S
.We 7Z7 "V CD*Y OK AXI/4L. AO7ZWH JW CAL10X4 770" 4O'L1CA.
MA7/qN7Z'k!O A'O/SG J2VOM 0W Vr-209 .0cSW 4P.Sw E4ejf S/,OF ODA.~~9/47doIFa MW Aw lFC.7r 3
40'7`NŽ 1 -, ,
6Q63Afl90 ~~~~~Raytheon Engineers & Conalructors, I MATERIALS TESTING AND EXAMINATION SERVICES P gjl ULTRASONIC CAUBRATION DATA WPC5 "
PRJWECT V , .,t)MUC DATASHEENO. . /#D DATE /0 W
_A . .AAl.PV0 £n^%A rn a - UT' PQgrv' / 0 ,sr-% A SM _ ____ rnfwQJ0--- -. - - zs.
l V.
COMPONENTOR WELD IDENTIFICATION TEMP GAUGE ID RECORDABLE INDICATION
~~7j6L 130333 iJee_
CABLOCKNO. 57L R/ __T S7. P JQ NaCmsr SD EXAM! COVEERAGE gID ;?'D i' 00WHAZ BASE MATERIAL eAXIAL CIRCUMFERENTIAL SIZING hER 9
EOUIPUENT DATA SEARCH UNIT ISRMU~LMNT Mantifacurer KA . Manuftactrer S ! sojE.
SIIC 3c slyie jgAM9 JR..'s"e ~Dual sertaim. -1. e6-6 SeialQ NM Fre.8ny d. isO Reject Sizecs) 3kt 1"reig.46- Reg Rs-hfDDamping SOL ANgNe E Modea COarse A a 3JC.OamiO a GdGain:
Couplant__
~Primary coup~~~antW~~A~~iatch No. Q____ S2 1 An Raterence Response tude8% Full Screen HelghtL?'A 2 Ae~ -
DAC PLOTwliME AM, Pm CAULRATION CHECKS 10a - _
-........................................ . AMPL
- 20 (dB) SWEEP + 10% OF
- - - -- _______ OF INITIAL AMPL INnAL LOCATION 8 T == TIME YES NO YES NO
%FS So 0- _ - _ - "
30----__ s;
- r= _- A L.ALEVEVL DATELV 20--ATE 1t- _ _ - - X -- _-_ > A LEVEL DATEd % 5 0 1 2 3 4 VAW 6 a8 10 gDA-I-SCREEf SIZE: 2_. _ _ ATE OME. Yenpefomrng exwdrnagfm w meoOAChI requkw khceterefer adarclocdnandaantaudsabove.AMI[-DAT L,4 ADDTIONAL REMARKS
(.0w JHEQC. VY V AX SCAM EXAMMIA77O' F.41ZM YAPjE £VO 3/0IFf OILY M w4c ^ WG; ist ,edge 134,31.31 I -,Pvc
.er7:. 1P - -
6063A140 Raytheon Engineers & Co ntrustore J -
MATERIALS TESTING AND EXAMINA1nON SERVICES F - 4 ULTRASONIC CALIBRATION DATA , ,,IL' PROJECT V. C. SO^JMMEA RFo DATA SIEETNO. V5 /ATE(/ D Ttz-94 WSYST -C M ¶2 - PRfOCEDLURE= 9aU -RQ-1 REV. 0 COMPONENT OR WELD IDENTIFCATION TEMP GAWGE ID RECORDABLE INDAMTION eC-Q /-4.2Oo j4 -. 4 l74 L /40333 3J ATnCHCED a go- I -ffa J120 7w /333.9Z
_ ' A _______, {
CAL lLOCKNO.927ML 2A THK sn NOTCHEs ' SDHO EXAM COVERAGE 0 CIRCUMFERETIAL iSIZING OER ID bOD 0WHAZ -LO-ASE MATERIAL [(A)IAL EQUIPMENT DATA SEARCH UNIT INSTRUMENT Manufacturer 14 . IdMacxter Menufa -9=Ve4Xy ModeI SCAIII! /
StybS e . Zi !L - Sartalo.i ___ _____ a Length QE 2-Serlal~~~~~o.
1< I~~Seral W &1' 7 Zv Serial No. l ,og Frequency /Af Reject O)E Size(s) D (.t .0 i(Freq. Rep Rate g Danplng tQ -
Angle 613 ° mUode Lo1J G --- dB Galn: Coasme FirT%6 dB TJ coupAlhNO.
09 go0 Prmary Referarce Response AzrplItude - %Full Screen Helght 17)L I)6?n =
g
~ MA )
DAC PLOT-lME -AM. PM CAUBRATION CHECKS 100 . AMPL- 200A (dB) SWEEP+10%OF
-s-o -OF INITALAMPL INITIAL LOCATION
> tWr _ _nM.E YES N YE NO 70-- -- 'Y 1C - -s - - - - ao /-- v
%FSHSo E - - -. _ I
-0 EXAMINER(S):
- 31) _ - - _ 1IA LEVEL . I DATE t - -1) X t EL. _ DAT4 V-9
_ _ _ . REVIEWED8:
2 3 4 5 6 7 8 9 10 nVE 9ww ,, DATE1.- tfilt' SCREENSQZE: 0. MP .DAT NOTE. W7wnpefon exarrsatkons wheru no DACI requ /4 hdc2te refereace reubecto lozfon and anrtmud above. ANll9?i t.Wa DATE ADDITIONAL REMARKS 4E.EfM/i/1qT77/J P&.90fD .4Z4n1 77Y(/CbrCE ..5WF.C C*Vo 7.FlP6iC OALI
_lrr 11
- t. ,q9 r dqk -CA
.SCAAI "
,r< ~~-F ,"r" 6=63A-0O Rayfhimn EngInters &Constuctorsa L )
MATERIALS TESTING AND EXAMINATION SERVICEA-` i --
I ULTRASONIC CAULBRATION DATA 1 4 PAGE*1 DL PROJECT V. C, 2UMMEt. EM -DATA SHEET NO. 1 DATE 6112/-92
,^ A.V#,EAIP 91- A/.ik/- Eno t--I /)7- - I UYb I rM " ' - -I.w.z1n ~ Molt lVe n-'
COMPONENT OR WELD IDENMI1CAM1ON TEMP GAUGE ID RECORDABLE INDICAfION
--4.2KXA -.24 7rga.. /3dL.3 3" d4 z M r-A -n C~AL BLOCK NO. 1 7- ---- 74W EXAM COVERAGE I 0333.- NOTCHESe 2' SDH~
ffID OD 4iMA 14AZ 459 o'BASE MATERLML "LXaL CIRCUMFERENTIAL '9SIZiNG '1( OTH4ER t EQUIPMENT DATA SEARCH UIIIT INSTRUMENT Manufacturer 14AaS5od'C- Manufacturwr Se V Mode ld/i/C IJ.r Style L iSiniDe D SeueJ r -U S7EDG .'i G Serial No. 9 I D.2 ;? sFrequency I Reject f sizs($) 4( X / ) Freq.I Rp Rae Fep d Damping J-Angle ks7 Mode Lo4G dBGaln: Coarsmne. A&L
-4Ai Fine ( Z dL2 Angle aldl~o 4Pdry Refereneo Response Coup~an(A~~~~6atch No.Amp~ltuda .% Full Screen Helght'_& ,V6A A--- 2MC~.
DAC PLOT-TIME .-I°S A34 PM CALBRATION CHECKS 0Ca - _ - - - AMPL: 20% (dB) SWEEP + 10% OF SO ___ _ OF INITIAL AMPL INTIAL LOCATION so _ t _ _ _ TME YES NO YES NO 70 __
60 . _
/sB3 it' 6
__ _ .- IO dI1
%FSH So _ - - - __ __ _ _ I C. E/Lh L 1 20 -- S -_- E-X-L-N-20 - - _ _- 1G~ 1LEVELZE DATE-/YA tO _LEV__ 5 ___ 2 $; _ E EL :: DATE'0I&A MIEWED Bn 0 1 2 3 4 5 7 80 10 rC1A- .... DATE llJ SCREEN SIZE dQ- tP 2. DATE.
JVOTE, Whott perfionng oxaamafon5 whoeno bACk mw tr kxftate reference reffectw kadon and amptude above. ANII 4 a DATE /-4 °S¶ ADDITONAL REMARKS £&cXoVM/AM7744W .1McAFROM~ _rfqiC;6 XCA' 7#VR4F.r NOVMA144VL~ 220 7W* ,
E67114 AqX .SA" cla
I e I Raytheon 0 a- a-. .11 . k ..
Engineers & Constructors a' a..~~
~ ~ L
. -il 01sa-Alw fi"EET, go OF /
MATERIALS TESTING AND EXAMINATION SERVICES 7k;* ITE W4TIFI N A /-Y4 INDICATION DATA CALIBRATION DATA SWEET NM AJI n ' -- 9 .Ir/-45y - 1A l (C/or bye~ Id X aA#dA?7a 4 &f)
DATA TARULATIOm SCAN ~~~~~~~~~~~~~SEARGCH UNIT 6%DAG OR HAkLF STRAIGINT OEAM O4RECTION ~~~~~~AU ~~EXITPOINT
_ LOCATION iMMAI0JAMPLITUDE (CAONREFLECTION)
MOICATICI.EXAL *MAX SWEEP MU MA~IMMU 140.
OiAOM ~~~~~~ ~~ READING AT~d BWEP AL ppBAC MK REFLECION BEAM ___ (A pfIDIATON sREDMO at. WED)ILmLAG L=.z SWEE L SWEEP mY _ _
7bs O-k/ I.~~~~~~"-'
OZ-~Zn~~AIOJ 230 r M 7~
EXA-MIND. 'm Ir I- - .
.,_, _ , X CONTINUATION ATTACHED . 0 YES yfNO 9 s
K.Ll- s arTC-IAWMI~
REVIEWED BY. .. DATE_....
, .. r _ _ _
Raytheon Engineers & Constructors aY xCfi. DATE .. 'K.. ~~~~SHEET... OF i CHKO, BY LO- DATE I 9IM oM NO. h (1A.
CLIENT SCIM-awn taT Vtv!. .5r 7ni1I e PeAA bbUjrI.uI - - .
B81 248 -
Raytheon SHEET 9p OF.A...
CHKCO. B y DATE DEPT CLIENT PROJECT ItCd5A1,0464e ?
SUBJECT e~-.O 2 581 2488
lkaytheon Constructors iSHEET..LL OF CHKO. BYIZ. DATE cpa
~~~~~ DEPT.~
10 CLIENT IC6 PROJECT lV C!;sdMAf" 0 e 2 .rz-I.
el to tcfr - i - -w1a4QA - -27 581 248 - -. - _ _ __ _ _ __ _ _
Raytheon I Engineers & Constructors MATERIALS TESllNG AND EXAMUINATIlON SE3RVIa0CES b M;SIDIENTFICATION INDICATION DATA I I'laI m$* ^&o- -/-ooA -. 27 CALWAIOXN DATA SHME NO.
DATA TABULATION EXA ON aw& EXIT POINT LOCATION W AAPUTU uOr (CAL ON R6ULECTI 09 N IIDIECATION Sm Ffim A"wLw S *WETI SWES° LgEPmu AMTD AM Ir0 I
I I
L i/A~~63 /,Z6O (is 40 e3.ic P1.6Wd i/ /
WAS WA/A i G7t5 S 2 18\ a .76 A > / hWI W/A
_ _ ..~~~~~~~~~~~~~
_ _)
@ SC A ;k1
- CC~~, .
m 52 X Z oW .~~~~~~
S<-O L9^\~c Q~~~~9AMLEI Ofiq_A OMET 1 ~~~~~~~~~~OEM MWK C 2t @3 mk"s34i'5Al yeow t
con~~~~X OFLNM _RMWC Ts .O_ _-mk_ _ __
EXAM9 ,f !75;
~TC-IA tEvEI_- I COtNlluA-noN ATTAcHEo -O YES / No Ak 30A ,TC-tA LvEVE9;:
AmEVIWEDUY, DATE, It-/ 4¢t
- l f-v U
Raytheon
~-
Engeers & Constructors s A_:,
1
_.-'- L Ue-I,S 4 / q.De-o0-3,-gt4 CHKD. BY d.L DATE__/____
CLIENT ZSW-Rmtc I/. 1/4-WMOG9 r - -
2
--- Arc}
-~~~~~~~~~~~~~~~~~~~~~~
F f
SUBJECT 6A - /- 41102004 02 7 581 24-8 . .. .
12149 V.C. SUMMER REPLACEMENT STEAM GENERATOR IT-NII&
!el' f,
'11, C7-~~~-
\%~~~ ~aCc-1-450Co4-2S X~Lt.Tr I 0~~~UILTT A/31".4 LI/7a~
U & V. NOZZLE TO SAFE END WELDS U-JR & V4R, NOZZLE INSIDE RADIUS V'56-7 oooze t
145-0~~~~~~~0
- n 0 00 OF Ep COVop.GE Mmcn
-1 A-FTT\ ~~~~C IR.C. SC AAS loo% I L I I-FTTT ~~~~AxIP. gc,% (rf4 100o6 a AmA.L SCN(Kr ZY L VfOLUMLE
'r~~~~~~~O'rAL Z57' 47 C-D-E.F: EXKD VOLUMS La AOT' EXWM4ED
Equipment Module Edit View Report Module Facility Utility Options Help Equipment XSGO002C Alt Id : Owner : VCS Name STEAM GENERATOR C Dept... : 243 Type... HTEXC HEAT EXCHANGERS, COND., C El ?IX: Y Status...:
Group... Criticality...:
Unit... 1 PLANT 1 Maint Area... :
System... RC REACTOR COOLANT FuzIc Sys...
Account... : 5300000 MAINT REACTOR PLANT Val Lidation : U Unknown Parent... Building... : RB Floor. ..: 412 Rpr Spare? : N Cost Roll? : Room...
Loc Desc : RB--412-075-32RB412-07-2
==
Description:==
VERTICAL U/TUBE Safety/ISO?:
REMOVE/REPLACE MIRROR INS IN SUPPORT OF MWR-88M0005 INSTALL AND REMOVE SCAFFOLD EXTENTION Notebooks? : N BOM...
Specs? y Vendor... : W120 Asset Num : Mfg... : W120 Make Dwg? : Y Model : DELTA 75 Serial Num : 12149 Size 4250MBH Alternate Equipment Id.
. a ADP 95/
r,4t1 ~ z-6063N1-90 R6aytiei Enilneers L ConstuctOa*m L " L MATERIALS TESTING AND EXAMINATION SERVICES PAG.L. OFg
'ROJECT V e___S()t~r~rP_ ULTRASONIC CALIBRATION DATA 1 5 PA/
PROJECT V.6. St~h~t'4~ ?Ft5B DATA SHEET NO. DATE A'5 9 -99 SYSTEM _PROC V. ci COMPONENT OR WELD IDOMFICATION TEMP AU0GE ID RECORDABLE tIC11ONt Csa- I- 4sOoA%- 27 f3 /13033.5 . _ _ __
,~~~~~~~~~~~~ SZ eAe_ _ IOKo .,U. - K - . /30333 cALsLoako.1?7qP? >,M St THKg 70 f /03 SD*
EXAM COVERAGE io obr 4 WHAZ jW1 BASE MATERIAL I AxLALj% CRCmFERENTiAL SIZING OTHER EQUIPMENT DATA SEARCH UNIT INSTRUMENT Manufacturer A Manufacftuer -57;1Vw Mode 5 I3 bylls G X e.:AMAIA Sirde .. .. . .
Sedal No. /36 - T2!i Met In en -s8 Seroal No. I.? 37 415_d cta- J.29P"J!L ^,eje Rep Ride _ . 1< 14 7 D.aring SW~ A-(
Angle - 2 . -Mode 1-6 Pfrnmary Reference Rasponsm I Coup aI1Q'atch No..09 Qoa . Anvipltude -% FuLl Screen Helght IAC Con -70 Ap~I
- I w
DAC PLOT.-TME D 7.OI AM. PM CALIBRATION CHECKS I AMPL +/- 20% (dE) SWEEP+ J10% OF OF INmTAL AMPL INITIAL LOCATION 8so0-- - I I< TIME YES NO YES NO 70 - - T- 1 -- 1 13.20 --I" ' 1/A __ 'A 60 I-- - - - - I - 'd/A "A q/A A/4 /A
% FSH
_ _A N/ _
WIA _fA EXAMIN~R(S) _
30 1 I 3_ 1_
1-C-C-1A lEYEL = DATE 20 _ _
~~~~A LEVEL -^ - - D A T E 4
O 1 2 3 4 6 S 7 8 S I0 I Mma as 1 SCR EE S i Z.- ...-. ... .. 2>- dJL O-ATE #A NOTE, Mw7en pert oming exantnatons wh~ere no DAC Is requbv4 kdlczte referene taffectcr locatin atndaflnob: abovre. ANII& n J/i ADDITONAL REMARKS *- AS AtElEbEt -i- 1nAIN 7-A U ESe. AEtpLEC.rvDA1 e707, F-SH.
SCAAWE1L VAl r.50W sibF. I WE-t4 5 PNLY. Sgrz DATA r.~~~$~
PCX 5CAAN OA YAFA EAi& S)1PE, .57Lv w4s PEA.FeDt'1Er #Al CLBOWJ LAV61IC-LAPxox, Ftom iv~Etb TO Tro
- '09 - t- ' I-*'~--, - -
S/
('~~~~~~~
Gom-s Riyhon Engtnears &Castnicurs , k\ 1 MATERIALS TESTING AND EXAMINATION SERVICES - L ,; jQ SOMMERT e~ ULTRASONIC CALIBRATION DATA 8, ° PROJ£CT "__ __ _ _ _ -DATA SHEET NO. - A226 DATE 10-11-99 SYSTEM PROCEDR Yv7- iE:i9 -' IRV. -- L COMPONENT OR~WELD IDENTIPICATION TEMP GAIJGE ID FECORDADLE INDICATION~
C.G~~- l-4300A
~~7 I3O32-3~ ~ i CAL BLOCK NO. L11 r 4) THK d-7~ ~3NaraiEso0 Si EXAM COVERAGE ID1'0e YD0 0WHAZ OACFBASE MATERIAL eAXIAL eCIRCUMFERENTIAL '~SIZING fiOTHER "IA EQUIPMENT DATA SEARPUINIT INSTRUMENT Manuticturer V:kMR1-8 Mmuwtwer STAEY Mode S ID8i sm
_, .s ALPHA OSingle Z-Bua SeriaN-o. 136-60 ' -,SR Frequency I MI 7k Reject _ ° Rep Rate I 4- IA, Danping 1 Angle 4e -'20 dB GaIn Coarse & FA ine.tPI PrImary Reference Response Coup,&&M64M-;3atch No. Q%7gp X Ampfltude-%Ful[ScreonlHeilghtt J 14 - >AC
_ I.
DACPLOT.Th5E 07 20 Al,PM CAUBRATlION CHECKS AMPL 20% (dB) SWEEP+ 10% OF OF INIlIAL AMPL INmAL LOCATION TIME YES NO YES NO Iji ii_ 1i
'V IA W/A
____ /EAl IA /% 'Y A LeVL JZEDATEY2 A.C. C1A -- LEVEL=~ DaTEO"2-'~
REVIEED Y rawu SCREEN sIZE 1 IP 2.~ ~ - DATE E...-
?JOTE: Lihn perfonrlngexzmbaffons iore no DAda req We4 kzkcate reference relector loca! o and enjpoJtudo above. JAtl <&b & & A 4 .& DATE {
AODDIONALPRMJARKS -TdIAECC#4.*a.C77O/J1 tl-C XC AXI#Vl . 4A& d4ofAC 3CAhuT btE W A14JA 4d
&C XXIA4L #V67tW /A/ r.4/&ZX#774N ZLOCXC.
NASELIM/E NASE VAA1IE4 iergol r;oT.20,% rsfi, 5S: A-rrAtxijb SA157-C -ForIF, dovELACE OF drv 45 tOD RW. lFXAM!lAIA77o'Mbffh el-NOW S/DCt 16W? 9:50s313 I
6063Af Raytaon Engeaers L Coastructon M X MATERIALS TESTING AND EXAMINATION SERVICES ^L' PA, t 3 ULTRIASONIC CALIBRATION DATA PAGE PROJECT em 60MEER HEIDE DATASHEET NO. 0v 9J 39S DATE e-19-IR SYSTEM 6 - PROCEDURE iE - Urr- 5 - I REV. ° COMPONENT OR WELD UDENTIFICATION TEMP GAGE ID RECORDABLE INDICATION e - f-43sCrA 47 AM 0 N XE ALCNgd A. IS T I30TCS CAL BLOK NO~<D2t.O 9 MID NarcHEs Er SDH AAM COCERCTGUE KID 2- f 0WZP -BSE MATERAL 0"XA JK iCIRCUWRETAL d iziNG IJOTHER "h EQUIPMENT DATA SEARCH UNIT INSTRUMENT Manufactursi 13 Mmotacurer 5;IOovModel -OA1I(C 136 szyie t~AMM4 B~Ir~!e 4Dual - 3?we, SerlaNo. L.#4 Frequency - ~Reject 10 0 SIZe(s) k I -- FreqAe?. S- Rep Rate q l/L Damping - 60 1.0.
Angte.-.~-----.-Mcde SU~A1~..dBealn: Coamose vAFine* A6IiZAS, Aop~ngle N. 10 Mode~Bat Pdmauq Re enci Response
________________________ AnS-1 Wtude .%Fun ScreenHerght M 1rff AC DAC PLOT-TIME AK~ PM CALIBRATION CHECKS 100 - --- AMPL.i20O%(dB) SWEEP g.10%OF so I I ~~~~~~~____ OF INITIAL RAPL WINTIAL LOCATION so- - - -. - - - -0 ES-N 50 - - - -y- A __ ____
%FSH So - - - - -A 40- EXAM-30---- -- - - - TC.1A~~~~~~~~~~~~LEVEL DATEL~
- - -. ~REVIEWED BY:
0123 4 5CR 6IE 0 841 DA10 ADIINLEARS-qSerHI14rVWSPEXPhE1a AT CL/.AIT-S u-qUEr1-.
S'EE AT-T4CJIeb f$PCNe -C.k %, 0#.vfAC1AF CkV.
YL MC Ai rO 6YA4hfiA1qr-,oV orZom sA/rC 0d1 slo I4wr - ~ q 3 5 oiL. Y 3'
K
Raytheon
. 0 Engineers & Constructors MATERMALS TESTING AND EXAMINATION SERVICES INDICATION DATA kWPlEb :#-*ACE-I-4(.ooA-.27 CA1ONOATA4mET0.-
- -;e - ---. - - ---- - - - - - -
DATA TP.BULA-Tl>
SCAN SEARCH UNRT 5oOA OR HALF STrAIHwDA DIRECTION PWT wc Mm SlAV EXTPOINT OCATIO MAXIMUMPAMPLIUDE (CL ON SAKRER.ECT NO. 810 WED~ EA~fr~ psTADCECWO A&IunJT SGL AXer
- l. OF WEWD pp~
I1RAOEW! *" FRTOM poU" A&M'LThO6 WWA7M UMUM~OOF __J._ "am__
ploram LEN= DISTANOE of LAWWM ~~~~~~COMMENTS 7'~
~ ~/F 60' ~ N/A i~ ~ori~7-y. *~ Fori £A~ Op rAPEk ro0 KfrpoN 04,17"Te '005511" CONTINUATION ATTACHED - O YES Y N0 . hln_ 2X"
__=_
- 4,1,0 TO-IA LEVFL RFlVIpWvffl By vm%~
A U j
~ DATE /gZ
Raytheon PKf Engineers & Constructors BYL. aLffut" DATE_ ______ _
CHKD. BY X- .ATE4_-___7___ - .- - F ODEPT.
lw CLIENT CF&rez4:t f SUBJEC KEPIAC~r,1 7 6EANrgArog l £4,FEAl;A- $AF FNA/- Et-bca WEILL 581 2-88 - .*
. 0 0 Raytheon on.'t (Th / 2Tm 9~~~~~~~~~~~~~~~~
, ,? _-
Engineers & Constructors $MEET (d OF p.
MATERIALS TESTING AND EXAMINAllON SERVICES o DMMENrOA___
INDICATION DATA WJELA
- dGE-/- qVOOA- .v CNAUDRff DATA HEVr NO_______
DATA TABULATION
- SACH UNf %DAC OR HALF STRAIG BAM SCN REFLCTItN E M EXW POINTLOCATIO MAXIMUM AMPIJTUDS (ALON DRECTIN aROUM. = 1T0. _ __
RE~ p u.M'na l l ____ _ .__
- - - INDIWCRRl I.
wamamr, READM OESJI SWUE P RU. A&TUO BMPUEETUOI ST. e~em WO.
WLM E Ce'wFROMu," AEAOPIG P06m091 WONG pm ty(% F~q (% F"~
S 130 - C . t togU xv 2.-. v Af US 4207,0 . If % __ I/
_~i
_ . O.SUNR
- ~ _____ = -~= - ..-
LOCAT)noP ot u S as w* COMMENTS 0110 l ML . FFLA" FROMSURFACE
____ V/ 3 SO° Al A Th ormmmy.
- .__ - ~~~~~~1 - 1 t f /A
___ = 0ot t ME F Of~-A2 rA _~O4.
PEPt ro LEES POIA EY/T
_~~~~~~~~~~~~~C gk-01 - K r YZ
,- Al TC-IALEV ;L CONTINUATION ATTACHED - 0 YES $~NO . L1 P. - TO-1ALEVEL -j "
bfftawanY 7fl nA¶m ;/A7/
- I
. .Raytheon i'51 f-Engineers & Constructors IE BYL&1IL2!LS=>. DATE S vI ~~~SHEET-. OF LI ~~~~~DEPT CHK. BY5 DAT - .. . ...
. .- OFS NO
_w . r-.. CaG
% Ig~
9 - - wK-P-pROjECT Vs C. *UPviI1er- K F- ?
SUBJECT REPLACF#'IEWI- (4 NEP.tArvk 5eFE Eivi - EeF W WE -
581 M288I. - . - . -- .
ratx C> -E I A Li I
AEfLACEUENT 4 NEMTnt. SAFE Elf- Etbow 5
I 5FFE ENv F'or OF -flECRIEtcCA4 COVEPRAGE 7YO,4L r; FOR ALL G WELBS LNOeeLES>
,% VOLtunE EXAtYIA'Eb WITS ONE .ILECTJOA/ V rTXASO QN b = 1007 .0
/1 7rW o St = 8370.
ro "
Ave. 70 covEtPAE = fh-n 70 .
/02-
/1. OtIStiFLA/ZtPA
I - 7.
WESTINGHOUSE ELECTRIC CORPORATION CGE-1-4502 8IGLPF RE SS.U RI Z ER RELI.EF IV1 cC 8"SC14-IGO Ss f,~'
.SOG""r 9
G*S-E.RC-10 5
if 4
3 P RESSURIZER REF
- REEj ? 1-4505 1-4505
21
'2_-
RED.
Washingt. t Group International Calibration Data Sheet Page / of_
- Or Plant V.C. SUMMER DataSheetNo.: UT-VCSU-RF13-2002-002 Isometric: COE-1-4502 Component/System: REACTOR COOLANT 01 RIGINAL Procedure No.: SCEO-UT-89-12 Rev. No. 0 Add. No. N/A CaL Block No.: CGE-4 Instrument Settings Search Unit Dia.: 6" Mafi: S/S ManfModel: STAEVELY / SONIC-136 Manufactuer KBA Cal Block "T": .747" Scope Serial No.: 136P1 106C031382 Serial No.: 00T96X Cl Block Temp: 75 °F Delay: .371" Range: 2.0" Size: .375" Shape: ROUND Thermometer SN: 221441 Velocity. .130 in/us Pulser: 222 ns Frequenc: 2.25Mhz Style: COMP-G CaL. irertioat FIJ Axial 0 Circ Damping: 500 0 Reject OFF Exam Angle: 45DEG. Wave Mode: SHEAR 0 Both Rep. Rite: 4 Khz Frequency: 2.25 Mhz Measured Angle: 44 DEG. Scan Direction:
Filter 2 Mode: P/E Wedge Style: LUCITE 1 Perp to Weld Parallel to Weld Ref. Sens: Ax: 30.4 dB Circ: 30A dB o WRV 6' Laminar 00 ExamnSens: Ax
- dB Circ: ' dB Couplant O Inner Radius 0 Other SDH Sensitivitr: N/A dB Type: ULTRAGELTI BatchNo.: 01225 Each Major CRT Division - .20 " CRT CalIbration In:
0 Sound Pathi Q Depth Daily Linearity Verification Search Unit Cable Enxamnation Surface:
Insrinnent Vertical Linearity: l3Accpt 0 Unaccpt Type: R-174 O LD. [M O.D.
Amplitude Control Linearity: 'Accpt 0 Unaccpt Length: 6' Conn No.: 0 Surface Condition: Fl.USHMFL&T TOP Configuration/ CRV Sketch Recordabli hIdications item Thermometer System Simulator Check Examination Area/Weld Access Attached Yes No Geom. Temp. Serial No. Amplitude: 80 % Osin: 45.2 dB's 1-4502-12 ELBOW/PIPE YES X 82 F 221441 Sweep Position: S.3 0
1-4502-13 PIPEITEE YES X 82 F 221441 System verification when recalling stored calibrations and/or after each examination:
1l4502-19 TEE/PIPE NO - X = 82 F 221441 O1 Yes O No [ NA Remarks/Reasons for Incomplete Scan(s) *SCANNED AT 5% TO 20% ID ROLL. Instrument Cal #
Cal. Checks Time Sintulator S/N: A(296L Initial CalibrtIon 1230 Initial Calib. Date 5N2002 Exaine / g:_
Exsminer~~~~A4Kg E / / Level $/Z De: Z~ 0Z Intermediate N/A Exam7 ( lLevel: 7 Date: 4- a - 4V intermediate N/A
/YI -ZDate Reviewers: (Ci) ) Daterl(* Final Calibration 1615 RevmveinGwL Furtlher Evaluatbon Required - OYes ErNo Final Calil. Date 5N2002 Reviewers: , 01n/ DateS.2
Washingi-Group International O R I( '3"1N A I Calibration Data Sheet Page 7- of 1 Plant V.C. SUMMER DataSheetNo,: UT-VCSU-RF13-2002-002 Isometric: CGE-14502 ProcedureNo.: SCEO-UT-89-12 Component/System: REACTOR COOLANT Rev. No. 0 Add. No. N/A Cal. Block No.: COE-4 Instrument Settings Search Unit Dia.: 6" Men: S/S ManfAi'odel: STAEVELY / SONIC-136 Manfacture MEGASONIC Cal Block "T": .747" Scope Serial No.: 136P1106C031382 Seria No.: K2256 Cal Block Temp: 75 OF Delay. .508" Range: 2.0" Size: .375" Shape: ROUND Thermometer SN: 221441 Velocity: .127 in/us Pulser 222ns Frequeny: 2.25Mhz Style: MST CaL Directlbn: [Kj Axial 0 Circ Damping: 500 Q Reject OFF Exam Angle: 60 DEG. Wave Mode: SHEAR 0 Both Rep. Rate: 4 Khz Frequency: 2.25 Mhz Measured Angle: 57 DEG. Scan Direction:
Filter 2 Mode: P/E Wedge Style: LUCITE 0 - to Weld Perp O Parallel to Weld RetSens: Ax: 51.4 dB Circ. N/A dB El WRV 0° 0 Laminar 06 ExamSens: Ax:
- dB Circ: N/A dB Couplant o Inner Radius Other SDH Sensitivity: N/A dB Type: ULTRAGEL II Batch No.: 01225 Each Major CRT Division - .20 " CRT Calibration la:
0 Sound Path Q Depth Daily Linearity Verification Search Unit Cable Examination Sarhee:
Instrument Vertical Linearity: c Unaccpt Type: RG-174 O1 I.D. IXJ O.D.
Amplitude Control Linearity: 1' Accpt. a Unaccpt Length: 6' Conn No.: 0 Srface Condition: FLUSH/FMAT TOP Configuration/ CRV Sketch Recordable indications Item hermometer System Simulator Check Examination Area/Weld Access At ii Yes No _ Temp. Serial No. Amplitude: S0% Gain: 56.2 d(s TiElYPIE YES X - 82 F 221441 Sweep Position: 7.1 . .
1-4502-19 1-4502-12 ELBOW/PIPE YES X 82 .F 221441 System verification when recalling stored calibrations and/or after each examination:
Il Yes O No E NA Remarks/easons forincomplete Scan(s) SCANNED AT 5% TO 20% ID ROLL Instrument Cal # 2 Cal. Checks Time WELD # 1-4502-12, 60 DEO.W US AREA OF LIMITATION ON THE 45 DEG DUE TO ANGLE BEAM PIPE SUPPORT.
Simulaor S/N: A02968 Initial Calibration 1235 Initia Calib. Date 5/2/2002 Intemediate N/A Examiner: /f* f A /4Leve: W- Date:
, -: ZS- 0 Z^
Intenmediate N/A Examinera min I:7 _ . Daft: 4 Q2 Reviewers/Level: OI)6 P 22 D dte:/7 Reviewers: (Client) 5baw f I iDate:L4 doI/ Final Calibration 1620 5/2/2002 Reviewers: ( 02Date:+/-L LA Further Evaluation Required 0 Yes a _ Final Calib. Daft
Washingutst Group International Calibration Data Sheet Page 3 or 7 Plat.V.C.SUM1E Isometric: CGE-1-4502 OR IGINAL. *~~~~~~~~~~~~08c' Dat Sheet No.: UT-VCSU-RF13-2002-002 Procedure No.: SCEO-UT-89-12 Component/System: REACTOR COOLANT .
Rev. No. 0 Add. No. N/A CaL Block No.: CGE-4 Instrument Settings Search Unit Die.: 6" Mal: S/S ManfJModel: STAEVELY/SONIC-136 Muufacturwr KBA Cal Block T: .747r Scope SerialNo.: 136P1106C031382 Serial No.: J23456 Cal Block Temp: 75 ° F Delay: .675" Range: 2.0" Size: 2(.30 X .25L Shape: RECT. Thermometer SN: 221441 Velocity: .246 in/us Pulser 100 ns Frequency: 5.0 Mhz Style: SPDU CaL Direction: IZ Axial 0 Circ Damping: 500 n1 Reject OFF Exam Angle: 60 DEG. Wave Mode: LONG. 0 Both Rep. Rate: 4 Khz Frequency: 5.0 Mhz Measured Angle: 55 DEG. Scan Direction:
Filter: I Mode: DUAL Wedge Style: INTEGRAL M Perp to Weld 0 Parallel to Weld Ref. Sens: Ax: 81.2 dB Circ: N/A dB O WRV 6 0 Laminar 0° ExnmSens: Ax
- dB Circ: NJA dB Couplaut o Inner Radius Other SDH Sensitivity: N/A dB Type: ULTRAGELII Batch No.: 01225 Each Major CRT Division - .20 " CRT Calibration In:
E Sound Path 0 Depth Daily Lnearity Verification Search Unit Cable Enmination Sarfcram Instrunment Vertical Linearity M/Accpt 0 Unaccpt Type: RG-174 O LD. El O.D.
Amplitude Control Linearity: 0Ac/p Unacxpt Length: 6 Conn No.: 0 Surface Condition: FLiSH Configuration/ CRV Sketch Recordable Indications Item Thennometer System Simulator Check Examination Area/Weld Access Attached Yee No Geom Temp. Seril No. Amplitude: 90% Gain: 81.8 dB's 14592-13 PIPE/TEE YES X 82 " F 221441 Sweep Position: 7.0 System verification when recalling stored calibrations and/or after each examination:
IX Yes 0 No D NA Rernafkssons for Incomplete Scn(s) *SCANNED AT 5% TO 20% ID ROLL Insb Cal Cal. Checks Time Simulator SIN: A0296.a Initial Calibration 0900 Initial Calib. Date 5/3/002 z~ ~~~~~~6'Lvl u~......Dt:~
oxnnr: , , D *F 9 /tkLevel:/ &: Date: T- 2 - O 2- Intennediate N/A
=xaminelf <2d/- Level: S-P2 9/t S- Intermediate N/A
/tP/.Z2Z Date:-$ Revlew(rs:e(Client) Date: Fmina Calibration 1130 Final Calib. Date Reviewers: (AI - 4 Further valueton Yes [qrNo - I 5/3/o200
/320
Washik .on Page: L of 7 Group International ORIGINL CI\
9 ULTRASONIC INDICATION DATA SHEET Plant: V.C. SUMMER Examination Area/Weld: 1 4502-12 Data Sheet No.: UT-VCSU-R13-2002-002 Examination Surface: J I.D. l O.D. SurfaceCondition: =i Asfound I Wire brushed r Other Component Thickness: .747" Weld Crown Width: 1.4" WoLocation: cmwmNEoFewm Lo Location: oUrsm RADmIUOFUS ELBOW
. a.
s Maximum ThroughWalI Dimensions Search Unit Stright Direction Maximum "WV Forward Backward Location Beam IND. Angle Ax. or Percent L-l L-l L-Max L-2 L-2 Sound Path fiom Weld Sound W-l Sound W-2 Upstream or RBR NO. Used Circ. DAC 20% 50% -0% 20% In Inches Centerline Path Position Path Position Downstream Amplitude I 45 Ax. 80%/ 15.25" *
- 1.15" .80" N/A N/A N/A N/A US N/A
_~~ -
IND. COMMENTS I ROOT GEOMETRY ROOT GEOMETRY SEEN AT BELOW RECORDABLE AMPLITUDES 360 DEG. INTERMITNTLY.
Examiner/Level/Date:
Examiner/Level/Date:
Review/Level(WGI)/Date: 4'7 4t VL A0O<
Review (Client)/Date: Further Evaluation Required:
Review (ANII)/Date: ;- Yes = No 3
IWashiIwton O1R1GU' lWashington pas 5' of 7 kroup International ORONO- ReportNo.: UT-WURfS -zoz-oov COMPONENTNO.: /I /50Q -
AC ka'c v~cJ.
coc~ ~a,;r4,4d CoVfPA3E
- 0/ R 0 t(L owb Coments:
Examiner Level ;QV0E t r-A)S L~vlcz Date cL&Q,,
11 -
- <I (n
- 6, , ,
';roup International COMPONENT NO.:
I-If 02-/3 F/ow Coments: 507% Cockr i 64ar-c over,4'YE / daIC-C, s -.-u'y IF- S;Cla
-_ A ,,-
ft j WI i ?.
Az Daite -- ' Z
l~~~ashingtop ~~~~~~~~Page -7 of7' O~GN LReport No.:ur-vcsu-rFi3-2=0-oo G~roup International I ORGIA COMPONENT NO.:
/-9q6o2- /'~
. F::OW~
cordJ pr7 ItsC/ c vti- A c X4; v~E of.
/00 %
Comments: o, vE 45 I1 Examiner I Level. Date - Z - o k)-ea, -I,\1Nd A14'J1,,1Af',11 J,, I- 6 111-YA 3--
4 1PRESSU
-. 7 RIZER S 4.. SCA-lGOIS
.531 T 60 SCA- )GO S' 37 44
.719""-T 41 1-q506 DM)
. 0 I -,~*- I I PZR I
-;F 17ty I've'40" I I kllo s I I I I I I I -_ - _-
30 G
8 4"/SE-RC-05 REF 24 1-4300 021 17 10 14 13 15
Raytheonl Engineers & Constructors Calibration Data Sheet Pageo ofL(
Plat: _L Iscaebtric:
igurtLL let-ikPL$!9: '-5 CO ~`2e-FN AL Data Sheet No.:
Procedure No.: S~,'t q 00u 1_
CovmpolientiSvstcan _ _ Rev. No. -t Add. No. l
- I I I I Cal. Block No.: £C4,z-4 Instrument Settingp Search Unit I- -1 1%,10 Dia,: _ __ M:
Mainf/odel: ST flg 9/ IJlc , Manufacturer: RAI - I - 1-7 Cal Block ': L7 _
Scope Scriul No.: 13 f5 _ Serial No.: 4?A -978 1 i I CalBlockTeanp: °P Dday: .28I__. Rauge: J.- " Size: Z (7 X.1Oa shape: &Ift L I I 'iennoneterSN: tI S8' 0 Velocity: ?Z) in/us Pulver 272Z. ts Frequency: 2
.06IHi. Style: DL4Ia - I - Cal.Direction: (3 Axial O Circ Danping: 5. OQ_ Reject: _OC1L.F Exam Angle: ' 5 Wave Mode: , 2N4 E Both 0
Rep. Ride: 4K#4Z Frequency: 2.Z5M,24.. Measured Angle: .4 G, Scan Dfrectibn:
Fiber 2.-__ Mode: ANj-q 4 Wedge Style: /A/fEis44L. I I Ir Perp to Weld E Parallel to Weld Ref Sens: Ax: .__ dB Circ:_AlA dB I I II E WARV 0o al Laninar 00 Exti 5ens: Ax:_7.; 5dB Circ: PIA dB Couplant ° Inner Radius E] Other JA__
SI) Sensitivity: IAJ#U dB Type: J4LV?&4a&atchNo.: q!Ik.. Each Mqjor CRT Division _ i5 " CRT Callbratolen In:
5d Sound Path [ Depth Daily Linearity Verification Search Unit Calle Exominntlhn Surfoce:
Jsnibnent Vertical Linearity: OlAccpL 0 Urtcpt. Type: J5 rC p jto 1e4,17+ E]l LD. (9 O.D.
Araplindle Control Linearity: CKAccpt 0 UnaccpL Lentgh: COI Coun No.: 4 Surface Condition: _ ";
Configuratiol/ CRV Sketch Recordable Indications _ lern TIhermonieter System Simulator Check Examinalion Area/h'eld Access Attached Yes No Gemlt Tetap~. Serial No. Amplitude: 80 % Gain: of !C dBs Sweep Position: 6_1_
System verification when recalling stored calibrations aid/or afler each examination:
[aYes [No El NA Remuairs/Reusouns for lncomplete 3caui(s) _istrwment Cal N I _
REF. 1nwJ4 ?807Z3Z CaL Checks Time Initial Calibration <! 0O
- -h Initial Calib. Date 4 -O e ?9, Examainer: . , .. , _ _
Level: Ddate: 4_
_______ btdennediate 23 45 Fkankaner:
_S., S4^.t-eS=- .)ZA.~~~~ s Level: Ez. l Dute: 4-249 Entennediate _ _ _A Re vi ewst W- -- t-k Reviewers: (Client)_ l Date: &;,O1 ..1I Final Calibration O0 1 5 RtViewtrii6jN11)
_ b , . w t.,
zkv ec.s l f .,._
/9 Further Evaluation Required El Yes [r _. Final Calib. Date +_ 9_ 99___
W V
3/4 Raytheon Eagineers & Constructors Calibration Data Sheet Page . of(2 Pint:
lnelric: .£ 3 *skQL iL'L 'R-S (Ai:i NAL Data Sheet No.:
Procedtrue No.: StE4dTh8 qq (IF-aco I
{L Cciponent/Svstern: , Rev. No. I Add. No. l I I I I Cal. Block No.: U. Z.
Instrument Settings Search Unit I - 10- I Dia.: b ' Mii: __5, MutA/Model: S; C. IL1 . Manufacturer: __ _ I -- I I Cal Block 'T 73 Scope Serial No.: lJ5 Serial No.:- " 78 I Cal Block Tenrp: 7 I 4 F Dday: _L7 9¶
- _ Range: i Size: 7Z.2LL , Shape: esr. _ Thermometer SN: LL5 °t O L.
Velocity: J 2 in/us Pulser. A2aL w Frequency: Z.0roti Style:_b__ . . . i Cal. Direction: f1 Axial E Circ Danping: _pQ_Q_ Reject: _Q Exam Angle:,_e_ Wave Mode: LQA;J_ I E Both Rep. Rate: '1jaf4 Frequency: 2ZS Measured Angle: 6 I . . . Scan Direction:
I I I I I I-I I I Filler 2.. Mode: D. 4t Wedge Style: I t4it Perp to Weld El ParsMIeto W.
Ret ens: Ax:_40g_ dB Circ:A/h. dB Exon Sens: Ax: 1 _dB Circ: 1Ah diB CQwlant I 9 E
C]
WRV 0" Inner Radius ° E Lasiiny 00 Other S~Ifsensitivity: hA dB Type: p1IAflj BatchNo.: O Each Major CRT Division- A45 CRT Calibration In:
gl Sound Pnath Depth Daily Linearity Verification Search Unit Cable EniOnathon Surroce:
inrwuntent Vertical Linearity: IAccpL Ca UnaccpL Type: ANL1 D Liq it4 -I 7°t El LD. IK O.D.
Anplinktde Control Linearity: X Accpt. n UnaccpL Length: -_ Cown No.: 4 Surface Conditien: _
System Simnlator Check Amplitude: 10 % Gain: (.5.+ dE Sweep Position: S.(
Systefn verification whet recalling stores calibrations and/or after each exwninatio l Yes El No a NA Reusaurts/Reaacons for fncormplete Scts~s) liistrwe..t Cal # jP -
A'Are: eer.Mt 180'7z3z Cal. Checks Time Initial Calibration 2 0 -52 Initial Calib. Date 4 -9 t?
Level: )Date: I -/0- 5 9 Intennediate 00
_2Z Level: 9 Date: 7-99 . hitennediate AJ h
"-/O-qReviewers: (Client) li_ Date:_ h Find Calibration 0030 W-L/19 Further Evaluation Required El Yes [i3<o Final Calib. Date 4-10.c9
Raytheon Engineers & Constructors Page _3 of(.>
Data Sheet No.: U__ 00 Plo: _ -& fhonelPM6-1&
Isanefrnc: t - 3Lt:(D] LH !+/-Rf SOc64u_8-l_
Conp)omueu/Systean: _
ORIGINAL Procedure No.:
Rev. No. __ Add No. _I I I I I I I I Cal. Block No.: _______-
Jastruiment Settings Search Unit I -- I Dia.: _4L_ Mai'n: __
_ _A_ _ --- I Cal Block "'T: _.7 47 Mad:/Model: 5onc../3 Manufacturer:
z 5$ I I I Cal Block Temp:_ 7l F Scope Serial No.: ' Serial No.
Zek41
- I . I thennometer SN:
Delay: _,qL " Range: ZO Size: z(7LQ.)pape:
Velocity:,,2L ittnu Pulser 2.. no Frequency: Z.QAMSj ztyle: I I I I Cod. Direction: Axial O Circ Dam)ing: _S'k Q Reject: _ p Exam Angle: 4to Wave Mode: L 4 I I El Both Rep. Ri.e: rJe4w Frequency: e- 2 .Z5 Measured Angle: 5$5 Sean Direction:
Filler:_ Z ___ Mode: DlRA4.. Wedge Style: LAEM4CAL lI Perp to Weld El Parallel to Weld 734 dB Circ:AJA dB n WRV El Laninar 00 Re[ Sens: Ax:
Exacm Sens: Ax:7I ,3dB Circ _ _ ds Couplant [I ] Inner Radius [I] Other 24 -
_q2'.2t Each Major CRT Division - _ ;_ I CRT Calibration In:
SIXI Scnsitivity: A/VK_ dB Type:7U,1t Z BatchNo.:
(0 Sound Pnth E Depth Search Unit Cable ExtIStatibft Surrftce:
Daily Linlearily Verification Instument Vertical Linearity: 1IAccpL 0 Unaccpt. Type: VC -1 W O ( 17+ I. LD. O.D.
Unnaccpt. Length: _l; Conn No.: 'z Surface CondItirn: ______
Aroplitide Control Lineawity: PtAccpt.
System Simulator Check Amplikude: 0% Gain: L.k 2- ,B' Sweep Position: .3L.
System verification when recalling stored calibrations and/or after each examination:
RK/e. El No E NA ResuirksfReaxons for Incomplete Scums(s) Instrumenut Cal#
Cal. Checks Time ROV An Wo~e. 19 b b7z z. Initial Calibration 20 o7 Initial Calib. Date 4-09 -i. )
_ P. C.-o- Level: -z: Dute: ___ /_
_ ___ Intermediate Z2 A3O Examiner:
J. t441,U AI_51507X Level: .. JC DlOe: 4 10 .q' Intennediate __
Examiner:
- Date: iofl Reviewers: (Clientl ) Date: Fintt Calibration o e47{,
Reviewers: (Ru on leoU Date: '-//qzF5f Further Evaluation Required Ol Yes No Final Calib. Date 4/90- 99 Review-W V
Ravythewn Engineers & Constructors Calibration Data Sheet Page 4t of Plant Ste ie:. UT'- 00I1 Iscrnotic:1 - 3ht#-nA1DJ -# TA -5 ORIGINAL Data Sheet No.:
Procedure No.: : I CononentSystem: Re c_ _ _ _ __ .
Rev. No. / Add. No.
Cal. Block No.: IC 46-Instrument Settings Search Unit [7 Dia.: ft Ml:_55 ManlModel: ,7AYELY/5O44S4 /34 Manufacturer: Cal Block T': ,74 _
Scope Serial No.: / Sia... Serial No.:E A7SO - Cal BlockTemp: 741 OF Dday: ,5Q2 -" Range: _.J,__ " Size: . ;t50 Shape: RoAQ Thermometer SN: jj5 0° Velocity :12k in/us Pulser:) ZZ n Frequency: Z. !; Style: 4AM 6 A Cal. Direction: E Axial C Cire Douping: _ir0Q_S Reject: QF Exan Angle: 1 Wave Mode: _SACAj4 E Both Rep. Rate: _4_ Frequency: ?96 Measured Angle: -4,5 Scan Dbreelen:
Filter-2, Mode: _ Wedge Style: AL L 7;Pl5M) E Perp to Weld f, Parallel to Weld Re Sens: Ax: -A1 dB Circ:_4p?.dB O WRV 0° LI Laninar 00 Exina Sens: Ax: AIk dB Circ:4.ZdB Couplant 40 iZ El1 Inner Radus n Other NA Sufi Scnsitivity: 1 dB Type: ATIttILJLBahch No.: #
PM Each Mqjor CRT Division _tdS I CRT Calibradon la:
[B Soond Pith E Depth Daily Linearity Verification Search Unit Cable Exansleetlon S&rfce:
nsrmunent Venlice) Linearity: O(AccpL n Unacept. T1pe:,: erQ&P19cQ,oT I-1e7+ El LD. 9- O.D.
Anplibxld Control Linearity: 1 AccpL 0 UnaccpL. Length: (_ I _ Con No.: 1. Surface Coenditfn: _______
Conliguration/ CRV Sketch Recordable Indications Item Tbemomneter System Simttlator Check Examination Area/Weld Access Attached Yes No Geon Tesp. Serial No. Amplitude: 40 % Gain: REf dBsx l-1503- 4(*( Moeroie> J . 6Y "F Sweep Position: 6*0 System verification when recalling stored
_~~~~~~~~~~~~~~~~~~~~~~~~V . y ~
ra ey. _--esF calibrations and/or after each examination:
[A Yes E No O NA Resawksflsewutss for lucoinplete Scw.(s) bistmnuelut Cal # 17 ReF.'vwe 9807Z37- Cal. Checks Time Initial Calibration Z OZ4 Initial Calib. De 4 08 79 Extruiner: \L J - P. I N"-, 5, Level: Date: 4-0? -7? lutennediate Z4 50 Exoniner:e .
Level: 2Z'R Dite: -4O91q2 ? Ihtennediate .^/A Reviewer (NIRI) -104o7 Reviewers:(Client) _ __ ___ Date: 41/ly9 Final Calibration - Q I Reviewers: (AN10 67i-1
- 17. */-7/ri Further Evaluation Requked El Yes EPNO Final Calib. Date _ __ ___99 MI
'_' '
- cr < * ;
w 0
Raytheon Eagineers & Constructors Calibration Data Sheet Page 5 of Plait: J Isontetric:
e.
C jJ m__1 X
k QlJL+/- -* -
01"l ORIGINAL Data.SheetNo.: ,_
Procedure No.: .SCo!4
/7-00 /
- .T 8LAI Cosnpolent/Svstem: JV Rev. No. I Add. No. I
- sl I I I III I I I Cal. Block No.
- Cj Cj E Instrument Settings Search Unit Dia: (P Mtstwl: SS Mnifd/Model: Manufacturer: RID__ I I I- v I1 Cal Block 'T: 7 Scope Scrial No.: Lj3t.J 8 Scrial[No.:_1 Bq 7-__ Cal Block Temp: OF Dday: .,7,6 -_" Range: J.L " Size: Z2LjMP)AShape: .__- Thennotneter SN: ii5S'i Q in/us Pulser: ZZ ns Frequency: Z. On, Style: Cal. Direction: E Axial ; Circ Velocity: Ul2, 1 1 I1 H 1I Dmtping: %QQ Rejct: <f g_ Exam Angle: 4S Wave Mode: .osJA O Both Rep. Rnle: '_X l. Frequency: 2 .;L5 M 'IZ- Measured Angle: _L_ I I1 1 I I Scan Direction:
Fiber: Z Mode: Qj ,L Wedge Style: L/ 7F 4 kL Oi Perp to Weld g Parallel to Weld AfA dB Circ: (p4,L dB O WRV 0o El Lantinar 00 Ref Sens: Ax:
Exai Sens: Ax: A/Jk dB Circ:I7.j.. dB Couplant Li1 Inner Radius ° Other _
SEtH Scnsitivity: A'h dB Type: 1lv7b% IBatchNo.: eO2. I Each Mqjor CRT Division- .-L.L* " CRT Calibration In:
Dq Sound Puth n Depth Daily Linearity Verification Search Unit Cable Examinstlion Surface:
lngnxnet Vertical Linearity: IM!Accpt 0 Unaccpt. TyLe,: IV4Coni O No: 4. -4 7 C] LD. O.D.
Antilitudle Control Linearity: 0MAccpL O t0naccpL Length: . to _ Conn No.: 4+ _ Surface Condition: 4C&AAwb Configuration/ CRV Sketch Recordable Indications Item Thennoneter System Simulator Check Examinalion Area/Weld Access Anached yes No Gemb Temp Serial No. Anplitude: ~8°% Gain: ! 1 dB's 50 4ES _, _Iq; 1_4; SweepPosition: 4 j
/- +5O ?3 -4 /-(tm JZ(rbS',r-System verification when recalling stored
=-,-~~~~~~~~~~~~~~~~~~~~~~ calibrations and/or after each examination:
£ F' = =
[ Yes EL No Fl NA Reouirks/Rewaums for Iuconuplete Scium(o) Instbnent Cal # (_
,CeF R q 1S0 ~7-2, ?. Cal. Checks Time 4 5 1Z L (4S &b 4. A 5 4#p'IE M &4T TO0 f771 e- 53 S H 610-- C; fe_ AA". /s'50 Initial Calilbation Initial Calib. Date 4. q 4 Level: I)lte: f-/0 -VF bntennediate 22.1 0 Level: l Dale: -ic- lItennediate A _ _
Date: f-It'- Reviewe.: (Cli , D ate :_ _ _ Finid Calibration 0V02 Date: '///. Al v Further Evaluation Required ElYes GQo Final Calib. Date '? 10 4q I
I Raytheon Engineers & Constructors page 4 of _L Sketch Sheet StationfUnit /2e!. uLtnmtnR Project RP-I Report No. 95X-tot 4I System R t- Procedure < ,L r-89-I Rev. I Add. I Date AJ/BJI f Line No. 1-4 SD3 - 4t (bn) Drawing No. e.314 G'01 gg5i! ReV5 Rev. 4j Component I. D. Pez. s1etwA Y ozz ie -ro sr Search Unit Angle AEL Mode R L 4SAI °L.
ORIGINAL WELLb 1-45*03 - +( (DM) 6 ia t5 R~L £.OV&KA14S PLoT AJoZ.Ve Pi PC NOTE: 'PRDrILrETAI(ENJAT. t OF MAJwAY W
T= .7L9 C-RDW ea WI bvi = . bo II~~~~~~~a Prepared By -4 mI.,so Level X Date 1-,D -? 9 A~~I~k2r Reviewed By. ,-
. _ Level9. Date //-/0 - IN AA9 Refer to attached Ultrasonic Indication Data Sheet
-WESTINGHOUSE ELECTRIC CORPORATION _ * :l SAFETY INJECTION CGE-2-2554 6 SSH-160 .719T Ss I0 SC -140 L.00T Ss REE.
1-4104 0
REF 4 I1*4203 %
IGu 17 ws I I
a G'
-teSE-ST-18 2G 24 4
3 49,MEF P.
'J., 192,
- I 5 23
"'2-523 I- (17 ^ 3 IDIL - r- 9.3 9-460k, 3OL-t-19)
I - f - - _
Jmaytimrn Engineers & Constructors CalibrahRon Dat a Sheet ( 3 "V Page 1 of~
Plent: L', St- m r" I Data Sheet No.:- 9L7rOZo:
fwema~c: Z ---
caventYsyutm Z- Z--I Zt~~f&
f/
W ui , AVP&C S~ 1r ORIGINAL Procedure No.: ScV Rev. No. / Addi No. /
Col. Block No.: -1C4 I I , I r.
Instrument Settings Search Unit = = = =~ ~- 9 - I Dia.: /0 M~el: -Si Cal Block T:: ___O aceep amralNo.: /7 t 0Z Z' Sedal No.: l *2 ZK. Cal Block Temp: 2 __'F Delar . . t3 " Rutge: 4..5 Size:
- hae: AXv wz>L "ermometer SN: 7ilfl VO Vuloity r/27jinu ulsor~ MZ'1-1ne Frsqwmcy ZZS Style: Z i~ I I Cal. Dfrnct en-: Axial J) Cire Danpin: -%CJO . Reject: #V ed1- EmmAngle: 46" Wave ode: J~JR I- C3 Both Rep. Roes: -,(/ k PreqWncy. 2- Meanoed Angle: 4dr Sca Dfrnctlo.:
Fiber. Z mode: o Perp to Weld Parallel to We Ret flens: AC..WL.dB Ctic:S97,6 dBl O wtARV O' n tLm;nsr 0" Dun~ Sens: A B Circ: Q.4 dB CoUplant o Inner Radius n Other 4 A//
5m smnitivitr. VA1 cm Typ: £Z4~~ f Belch No.: 9f? Each MWor CRT Division - - 5
- CRT Cetfrollon In:
0E Samd Prdh o Depth Daily linearity Verification Search Unit Cattle feeanh'*tIv surricet:
1wrintnt Vuictid Uneewify- "ccpt. LIUnecceptt O LD. 0iD].
Anpliltude Control Itomwity CW~ccKt 3 Uneacptt ueno: 4' Comm~.: Sr-ftea Condttlowz 1;4d _-,
System Simnlator Check Examination AurealWeld Anpliftde: 410 % Gain: .5. h d8 4
2- 1 S* 1*
sweep Pouition: 4 Z System verification when recalling tored calibrations and/or afler each examination 4.
I C3 Ye 0 N.o QNA R~ewuvlt eflteeon for faco niplete ScaKNs)
Cal. Checks Time
¶nitial Calilwtion 0,/
Initial Calil. Dae 4-Z -
-./ I - -01 e Ezwdgner. ev ~- 0-Z7 01 44ewo6 de_ 1Aw~l: _Z.Z Dae: Y~ss yi7g *ermedisfe / &.'00 Exaniloer. Level: . D led: i i bitennediate _ _ _ _
__/ _
Reiwler,: (Raython) - -P/Date: 4 f z-RffiremF:r(Clierd) EA R ue EDYes ( Finnl Calibridion __ __ __
Rewiewmc: ( A -, Date: I `hM;?7 Further Evhalutlon Requfred tz Yes l Final Culib. Date Y- Z #
-59
n- -
Engineers & Constructors rnlmi-a~na shnn#
4zn
'4.0.MULUA ISj&UJI "196S.EI IJIIt~tiZ Page 2S ofM Plot.e r: _ kCCnEZZF / ORIGINA r Di~Sheet No.
Imstic: e:. G - Z' 7 SS'/5 C _:nttyN. ---Za~m 7V ItylpLe 0RIGINALe-'""";' 4' ProcedtreNo.: Scs016_____
Rev. No. / Add. No. /
Cdl. Block No.: E - I&
Instrument Settings Search Unit Dih: /eP Morl: MS/
MuwModel: SYr ./>Ua' ..SL'4 LM Mumfadwer: 5
_ _ _r Cdl Block I : i e)5s' see.erialNo.: /3J. 7oZZI serinaNo.: JYZ i: h
_ I_ A\ _ . I _ I _11 Cal BlockTenp: 7Z 'F Dder: .30* - Range: 5.0 Size: , 17.* " h p. _____ ____ Thernometer SN: //S______
Velociyr .-/z7inlb Puleer Z wt M Frquetey. 2.2S style: o"57r 0.b A40 / ,\ Cod. Dfrectlmn: Axial 0 CiOe Danping: e~e> 0 ReJect: e7'A _ EzM AEle: 9'0 Wave Mode:. A - I2 0A ~-I4.--it O Both Rep. Rite: Frequency: Z iS Meartired Mgie: 4I-5O VIZ' dAN P4,,,AII _~ _.._ 2 JrvX,,X_' Scm Dbettben:
FPher: : Mode: fi W'edq Style: f*W ( E Pea to Weld 1 Prallelto W RC Bens: A.. dB Cirwc:. dB _~ _ ~~I I n[ Laminerf 0 Atv Exm Sens: Ax:r 4VdB Cire: dB Coaplant O Inner Radius a Other AII srz1sensivitT. _ tIdB Type:
j Sond Path o Depth Daily Linearity Verifcation Search Unit Cable !xmfatw Sur- ce hwnwmVerticwlU"ewitr. Wccpt 0oumccpt. Type: de',6 -74 O L.D. l O.D.
AnplitwdeCootroLi fefrit D')cep 0 I3nt et. Length: _ O_
CornNo.: - Swrae Condito _______
ConfligMlow/ CRV Sketch Recordable icatf one item Thermmeter System Simulator Check Examination ArenA/Weld Accese Atwched YV No Cem Toami. Serial No. Amplitde: % Oain: 3'/.O dI zt 2ii-z a 9 w~> 7b ,vPA/ e X O rF/,~ Sweep Position: Z ./
__ ___ _ __ _ __ _ _____ W,2 P, /! Y 4 . . _.2 iv4, * / 5P Syptem verification when recailing Ftom calibrations mndfor after each eatiand
[R Yes [ No E NA RenvitaIIEMfeuon for IncomnpletSenna(s) ~ ~ ~
R/Rrt~~~~~~~~~~~~~~~~~~~~~~~~filrl ~ ~ ~ ~~ ~ ~ ~ ~~hst"et wtun C aS Calle Cal. Checks Time binitil Cdliltdion &q.#I SO Initia Culih. Date 9 ZjV -99 Ramier r. z ~~~t-,i' - 4;f,6V Level: jx Difte 9-451-7 Intennedirde / . 3-2 n-- r -7/-- ~ Level: < Date: -Z+ bltenmediate . -'VI Revewewrs R14wml Reviewers: ( _ .. Date: : Finnd Calibridion 1.5-! f'^
Reiwr: (AN O&C-u M CIO fft, LL-7/97 FurwerEvablon RQuired C] Yes [RNo Final Cadib. Dote I c !' 77
TI .. --
imayWon Engineers & Constructors Calibration Data Siheet ¢NA Page ofCIA Piu: Vi/,e *JMmefR i Doa Sheet No.: .d L ToZD ooetric:
- GE ,
.ni"mye Z -
EtLdvv I/
7,0 p
ZP10 s. r ORIGINAL- kt Procedure No.: L0c4,- 4 8t /.
Rev. No. J Add. No. I 1- - - Cal. Block No.: , ':6 A Instrument Setting Search Unit Dim: /0 Mfli: 5/S
- - - - 4 C; m N -
MDelModel: s Rane . A5" Cal Block T': A. O.SK Sce Serial No.: L!3d. X)Z r SerldNo.: :6:Z.71 Cul Block Temp: 7Z 'PF DCT: , 393 Rinse: .SO Size: .1 3 75 Shape: AWsWvD Termometer SN: f / SiO -96 Velocity .6 is Puler: Z22 nr Cal. Dfremoe: E Axial 0 cire Dmiping: 56O 0 Reject-: c0 Eri, Angie: 66' WAo Mode: 740tA O Both Rk Raes: IA' Freqoency ZZ: Mesmed Angle: ..5 -;T701.v Asr Scan Drectlon:
Fiber: Z Mode: _ _ _ Wedg7 Slyte: AW^C. F9 Per to Weld l Parallel to W.
Rt Sume: Ax: 4 dB Cite:4/. dB O ARv Cot Lwnaminr 0P ESM Sesn: Ax: dB Circ: "d dB Couplant 0 Inner Radkis n Other BUR emWitivit: /, dB Thpe: K Batch No.: 53tS Each MorCRT Diviion - .. 5 CRT CoaIsvrafe la:
8ud Path Q Depth Daily Linearity Verifleation Search Unit Cable RXItnethm Sirruce:
bwnmwtt Vertical ILwrity: 0<pt 3 Unecept. Tye: Rew/7 Y o l.D. 3 O.D.
Apliide, Control Uarify MDccpt 0 Unwc. Lemh: 4, ConwNo.: -* Swrnce Condltl eu: ,
Confiffatloa CRV Sketch Recordable Indications Rem Tnn er System Simulator Check Exitmination Area/Weld Aeeen Attached Yet No Geom. Tem. Serial No. Amplitude: &C1 % Ouin: tc6A.S de
_- ZSS_/- ___ g__ . V es ye^e AA . "'I,, i /i*o
,4___ Sweep Position: Z <8 System verification when, recalling stored calibrations and/or offer each examinatio,
. ~~~~. R) Yes C No l NA Reewwwca/Reammon for I wolefe S-CMKB~) CInsutn Cal Cal. Checks Time Initial Calibrution O -9. "5 Initial Calih. Dete 4' zg4 )
-,~1 -- 0 -. - -
Exr.,0 -- 4fxrrW2 !Zs Level: X Date: ________ Intennediate /? cC, bxulinr. Level: 4* Date: Y-t~v futennediate -/If Rerieweha ( vYO - & .- I1eviewm: (CliedL)AL Date: Finl CalibrDalon /S.2 V/-
Reuwera f __7__ Further Evalnation Required O Yes ElNO iFinnJ Calib. Dote I `- Z - 3WI
P Raytheon Engineers & Constructors page i of 41
- tch Sheet CQJ Station/Unit VC.Sommmetr I Project XF-II Report No. u5F-oZ System 5. I. Procedure sLX6- j-F-I Rev. i Add. I Date ti I/z!
Line No. 4A Drawing No. c &E: - z - Rev.W Component 1. D. a-A z 5-5 q- Search Unit Angle VS I Mode ,
ORIGINAL
,cLov/ r-z&dloW (e9kzSf66 /Lo r 80o. &~= A/7-W't VIA'ke 7A/S
/-5 -. 7 = V2A0 V ,/ 4 4,:04 4 en
'0 R,4S
- 56. 7Z9 : eV-,' eV eovz- *e sec'Cccsyzdt v&Ilca-p Prepared By .D0A0 A9 )eeL Level Z Date V-ZV-S Reierved By/6z [/ "
'I LeveL.aL Date //-2 -97 z
A4 Refer to attached Ultrasonic Indication Data Sheet
RaytheotiT E1gineers & Construictors Calibration Data Shecet Page L of 2 Plat: V C .5(A"MMEfz Dao Sheet No.:
IaMMericjC G' CciaponctISytte"..
L7..'
CV. r-301C2 F40" 514 A.
CfAf4.GfAJ6
!ZOV~r PuA't' P is. ro D tS. 56JVA.
ORIGINAL ' Procedure No.:
Rev. No. I sCEG - l r Add. No.- ---
I I I I I I Cnl.B10ckNo.: C4c7 At E / -4 wo .L Instrtment Setling; Search Unit I I I I I I
I DiM: 3 5S 5Mmdi:
NrwXJModel:.srAVCLE ' /SOP*IC r36 Minmoucthoer: ,k B A CAo LC.14 Cal Block 'T: N /$
ScopeScrialNo.: 134 10' 3 M ScrialNo.: I2.4 16 I I I Cnl Block Temp: , (f bp Delay: 1 _ Rnge: I 0 C Size: 2 l(7. vI0. Shape: _R _W p I I I Ihenrmometer SN: 1 / _A_
Velacoty .. s *n/w Pulver: I O 0 fl Freqeiency: 4 MD& Style: M 5 ED 4 I I I I I I I Cal. DIrection: 1 Axial C Cirt Diunping: SOO. £ Reject:_ F F ExamAngle:. 0 WaveMode: Lo N' I I I I HD Both Rep. Ride: 4 If Frequlency: 5_ Measured Angle; N A I I Scan Direction:
Fiber. I Modc: D UVA L Wedge Style: M /A C1 Perp tn Weld 0 Parallel to Weld ReUSong: Ax: A dB Circ:
- dB -- I --- I -- T-1 L iAWy vn o L."minar 0" EaXnSens: Ax:
- IDBCirc: dB Couplant Inner Radius Other ki /j4 SDHE Senitivity: I /A dB Type:5opJorkco4 BatchNo.: 9532-5 Each Major CRT Division- 0. 1 " CfRT Callbrat In In:
A MAIT7AtIME D BACK-WALL Z 90%. F, a Snmid Pnth Q Depth Daily linearily Verification Search Unit Cable ExamInatlnu Snrfnce:
Idnunent Vertical Linearity: U Accpt. n Unaccpt. Tye: R6 - 4. w 1 n.Dt. IN: O.D.
Anrplitude Control Linearity: U Accpt. 0 Unaccpt. Length: ( ' CownNo.: _ _ Surfaen nitn:.G totrh D____
Config~irotioo/ CRV Sketch Rcoorrtnhir Tridlicatinns Item Thcnnnmeter System Simulator Check Exanii~naliort Area/"eld Accewe Attached Yes Not Cleom. Temp. Seriael No.
Amplitude: t1/i % Gain: Al/IA- d3's
. - 3oto - 5E~Ldetow -',.rZ 70 >IE go 1 7 1 Sweep Posititwm: AJ/ A-ystFem verification wheuu recalling stnored enlibrutions and/or alfer each examination:
0 Ye2 LI No T NA Revstioaleaaonh for incomiplete Scnn(s) Isrmn a
- Lle 9)eA'M V DS SID 6 DUE TO ofP C-AJmrCI&IARAl-low Cal8. Checks *rin~e Ifliti"l (Cril -tnaionn 1 1 luitiial (etilt. Polfe 4 - I f, - c? I Level: IT Daie: 4 - / - ? hiftennerliiite ~
4-f\
- .- t w Level: _ _ _ Dlde: NLf Tootenmnedinute A Reviewers: (Raytheon) / Ae r/1 Dale: /-// 9
- Revieweus
- (Client ) got Date
- Finfil Coulibriffuin" ....... 0~...........
Reviewers: (AMD 4, u' a ,/ Date:</.-Q;/S;> Further Evaluation Required O Yes Finfil Calih. Dnte , -4 -14 -- 17?
'p- w Raytheon.
Enigineers, & Constructors Calib ratiion Data Shect Page 2 ofr_
nluv: V CS U MMES1z Data Sheet No.: R quT °° 2 1emereic: CGZi- Z.- 3010 SPMr A. It 0; ORiGiNAL L a Procedure No.: SCEC- Lt r- 9 -I CwcmpocWSyetem:G..t.C. FAot. c9Ati&G., Pumt75 Pis. ro DeS. apZ. Rev. No. I Add. No. _
I I I I Cal. Block No.: C 7Z.
- 11) I No -rdo'l 3 Mnri:
Instrument Settings Search Unit I Dia.:
NrnU:/Model:.rAVELFY ISolvic 1/36 Mairmachrer: k 13 ALI'V E rtE'C. I Cal BlockT: M _4_45 ScepeSeriilNo.: 13 6 102 3 M SerislNo.: C 153 l 1 _ I Cnl Block Temp: 7 3- F Dedlmy:.604 " Range: 1. 7--; Size.2.(2.Se. 3) Shape: rcr I Thennometer SN: 17 3 1c q Velocity .2.30 in/t Pulser: I O 0 ns Frequency: 5 WAs Style: 39'7-Of-tfl0 I - Csl. Direction: El Axial M Circ DaMping: _°°g C Reject: t 1 Or ExamAngle:, 5 Wave Mode: Lo10J I I I [ Both Rep. Rate: 4 If Frequency: 5 Measured Angle: 4£ I Seen Dirertion:
Filer: I _ Mode: D A/ L Wedge Style: 1J 4 I)ifta nL Perp to Weld 3 Prnreeln to Weld I I I -
Ret Sent: Ax:_IL - dB Circ: 7 3 dB I I I n[ A-RV [0 1 LminnrOm Extm Sent: Ax: PJ[ dB Circ: 79 dB Collplant [:1 Inner Radius Other ki /A _
SEMI Sensitivity: M11IA dB Type:So jortCMt BatchNo.: q53ZS5 Each Major CRT Division - . IZ S " *'llT Calltration In:
R Smmnd Pnth ] Depth Daily linearity Verification Search UJnit Cable Examinattan Suurftao:
lnbtneMt Verticti Linearity " Accpt. O tTUnccpt. Type R G - 17 4. [_] I.D.Cod. O.D.
Anplifik' Corttrol Linearity Accpt. n unTnccpt Length: (
G Conn No.: 0 Surfa/ce Condlf lbn: G.It 0O-tot LD Configuration/ CRV Sketch Recorainhle oidie ntions Item Tlennometer System Simnlator Check Examinalion Area/Weld Access Attached Yeg hl c nh.* Temp. Serial No.
Amplitudce: 0 % CGain: 6 g dl3 27 - 3010 - i1 EL ovo 0 : fEo/
_1 Sweep position: 7. IT System verification whet, recnllin* stored catlibrntions mnd/or afcr each examination:
M Yes 0 No 0 NA Reewlrk/Reasons for Incomplete Scnn(s) bnstnecent Cal ,
Col. Check% vrote tautiail (Crrl, Wauh n I 1 3 '7 Initial Colita. l)nte A - I C.- Er'?
Extetiner. C_ Level: Li D10e: 4 16 V 1i1terunerlirte 1 3 2. .5 Examniner. 0;1)&-j 4 . ,\ _ Level: 3L DIde: q- I lidtennedi~nte I ..5 0 0 Reviewers: (Raytheo n1 -- dae: _____9 Reviewers: (CWhentL Date:. Al Mold Cal~tunitinn 1 -7 5 0 Reviewers: (AND) 9A) Date: '1 I>'/r& Further Evaluation Required O Yes [ No Finuil MaOit. Pate I4 - I4 - -
& *0d Raytheoni Engineers & Constru'ctors Calib ratiion Data Shect Page 3 ofr pimt: vCSCAD'miME R Jtmuetric: C &i i' 3 0 10 S r A. k.O ORIGINAL /1,101%
(D Data Sheet No.:
Procedire No.: SCEGC -
79L)T7 6)0' Tr -I Ctinpownt/Syten: C.. V.C. FA v M C f*4AitJ& m6Pu,-a5 P 5. r o DIS._s4 pZ . Rev. No. I Add. No.
I I I Cal. Block No.: C CF - Z
-f-g -W Rr r--
Instrutment Settings Search Unit I .---
- Dia.: 3 Moml: S S Mfd'Model:STAVGLE Y /Somtfe 136 Manifactuirer: I AA6 c4 Tr C.E I Cal Block"T": 0. 4- 4 5" Scoe pSipi a o.: 13 6 - I VO 3 M Serial No.: JT2 3 4 S G _ I . . . Cal flock Tcmrp: 7 3 F Ddear. 6. __ - Range: 1. LS size: 2 - Z5 . 3 ) Shape: r' r I I I II - - Thennomcter SN: 1 3 ot7 Velocity:.ZZ.7 in,'s Plser I C) rtnf Freqpiency: S_ tt Style: 3,1- of- II 0 I I I II Cal. Dwrection: s Axial E Circ Daping: S a Vn Reject: 0 F r ExamAngle: G Wave Mode: LOWJG_ I I I II [_] Bodh Rep. Rate: 4 Jr Frequency: S Measared Angle: SC I I Sean DIreeflon:
Filler: I Mode: DU A L Wedge Style: ; IAI 1 Perp to Weld j Parallel tn Weld Re( Seng: Ax:_ 6_ dB Circ:2_Jj4 dB - I- I- I - El 'ARVy (P [ Laminar do Exam Sens: Ax: 2. -dB Circ: #5/4 dB Ctmlplant D1 Inner Radius [-J Other k. IA SDH Sensitivity: J 1/ dB Type:50koPrit-c4 BwichNo.: .5 3_L5 Each Major CRT Division - . /I 5S CJRT Calftfrstion In:
O Snmnd Path fl Depth Daily Linearity Vcriflication Senrch Unit Cable Examinatl, rsiSurrac"n:
bIstnmnent Vertical Linterity: I AccpLt. Cl Urnaccpt. Type: R G - 1 7 A_ t lI.D. 5 G.D.
Anplihude Control Linewity: P Accpt. 0 Unaccept. Length: G' ConnNo.: cb Siorraeo ConditIon: G R 0 L4 rI D)
Contigiorationf System Simrtlator Check Exaniinalion Airen/Wedd Access Amplitude: t0 % rain: 7 0 de's
- 2. - 3 010 - 15 EL1. o t.- -10 T CE' Sweep Position;: S. I Svstem verification when recalling stnred cnlibrrntions and/or siler ench examination:
.91Yet *INo L NA Reovorkslteasom; for Incomplete Scun($1) d go 9KAM PA-Om V~ s'Dg Doe 1.0 00 &Eomurax/ Cal. Checks _ Tinic Initirl CalJibrntion 1 2_ CZ0 Ifitial Daflil,.
Dte 4 - I4 - '7 Level: __ fe:
Mil 4 _ / ? y- Iftennediate I 3, + 00 Extruiner: A _z Level: . Mluae: '1 I L.-, 9 rwfennediatte 13 s 5 H~aIn M,.,"uAlIlaw~innI / V 2 Dete: 0/s-Sf Reviewers: (Client). I, __ Date: Final Cl~ilwitinn 1 -7 5 Z.
Reviewers: (AND) 2~6ii&lKiw > Date:!e / Further Evaluation Required 0 Yes [gNo Final Cal&h. Dale 4 1 - ?
- . M AMk -
Raythcon w 4 ofr c~ (72pYx Eagineers & Constructors Calibration Data Shect Pnge qur plat: V . U Ionietric: C G.E -
(A M M Z-IZ 3 010 cur A. A 04KV
- ORIGINAL Dara Sheet No.:--
ProcedireNo. SCEC6 T- g I Conpoee/Systeem: C U.C. C'@* C.UnA A IM iu,-piP5 I s. ro v Is. HoRe. Rev. No.-I Add.No. ----------
k, I I Cni.BlockNo.: C_&E - Z J.D MO i-Col k1r P)
Instrument Setting, Search Unit I V Dia.: 3" Mnf'I: Ss 1inff/MtodeI:STA/VELEY15 /OtJC u3 Manimrtflrerk B EQ o r E c 1 I Cal Block "I: 0. 4 4 5 ScepeSerialNo.: 136 - 183 1 r3 Scrial No.: H 1 . -3 1 0 I I N I I Cnl Block Tcmp: _ 73 _F Delay: . L 50 " Range: 2. .0 Size: 2. S Shaper9: l0O I I 111\ I I 'liennometer SN: 17 3 1 0 ?
Veocity: .12.3 in/ws Pulser 12.2 2. ns Frequency. 15
- 2. Sle:.: 6 *M M I I \k - I Col. Direction: 1 Axial I Circ Dmvning: SOO n Reject: O FF Exam Angle:. G0 Wave Mode: S H EA Q I I I X11P 101 [Ei Both Rep. Rite: 4. K Freqtency: z- Z5 Measred Angle: 5 D Seen Drhectlnn:
Fiber: 2. Mode: P IL- Wedge Style: 1 5 LA/ Ui Perp to Weld 0 Pnrnrlel to Weld Ret Senh: Ax:5 L dB Circ: "A/ dB I L - - O] wRv " [ Laminar (0 Exim Sens: Ax: S V dB Circ: /AL/ dB Couplant 0 Inner Radius Other fJ .
SMHSensitivity: jAj dB Type:S0AOTlGJ BatchNo.: ? S 3 Z5 Each Major CRT Division - 0 2^. CRT Calibrstinn In; f Sotind PoIt h 1 Depth Daily linearily Veriflication Search Unit Cable Examination Surfaen:
Iitnuneti Verticnl Linearity: 1! Accpt. n ttnccpt. Type: I Con No_4_ [_] LD. U O.D.
Anplihile Control Linearity: M Accpt. Cl Unnccpt. Length: 6 _ Conn No.: 0 ___ S"rfoce Condltla: G R 0 U NJ D Configurntion/ CRV' Sketch Revrdnrthle Indicnrinnx Item Thermomneter System Simalator Check Examination Airea/Weld Access Attached Yew ~ GUnOM. Temnp. Serieil No.
Amplihide: 4- ^'% Gin: S 7. (ns 23 o to- IS EL go -.- >/-rrV EeS~ 3 Sweep position: 4(r. C Syrtern verificntion when recalling rtnreel calimralions andlor aller each examinsaion:
!£Yes f Nn L NA Rensirs/Rensons for Incomplete Scat(s) Jrasingncint Cal 0 I3 Ousgp0 60 POLIMAIIY E(rAM AAJG.1.E DUE TO 0moY~EP EFeEG7'IVEPESS OF 4C BAISED ornJ Coc,-o~ipjir Cal. Checks rintc THICKMsESS 4PIND EaELP Cko.wtj. Inifinl Calibration I Z ° $'
- No EXAM FAtO*4 PS SIPE buU' TO 017 CG.`0061ETPL/' hifitil Caliht. Inae 4 q q Level: . )ite: 4- I 4- V I hltennedinfe 4- i 0 O Exentiner. SZ, _ ) M Level: .1r Ditmte: q -/ C I I5 fotdennedinte - I . ;2 0 Reviewers: (Raytheon) !52- l D1te: A 2_/S- Reviewenu Evalanio R _ Ie: Final Calilr,,tinn 1 7 S'5 Reviewers: (ANB ) - //') -' Date;d /g,/ /p;f Further Evaluation Required O_ Yes r Finsil Cnlih. Pate 4 - 14 - I? ?
U Raytheioll. _ V Eagineers & Constructors Calibration Data Sheet PaSe aof$
Plrt: VC 5(UMr1f Iz. Data Sheel No.: qq571 .af lemietric: C.G.E 3010 SurA. to OR !GINA CP Li Proced reNNo.: SCE '
UT - I CvmnponttSytem: .VC. 049oI CA4lnRtfvJG IP4Ps -pis. ro Dos$. HPR. Rev. No. I Add No. !
Cnl. Block No.: C 6 2.
I :~~tOr Instrttrment Settipn Search Unit Dia: 3 Mn'l: 5 S _
Mmi.Model:STAVELEY/SOIJ1C 1346 Momifactirer: Ik B A EQorEcH CalBlockT": & 4 L 5 Scope Serial No.: 13 6 - 10 8 3 M SerialNo.: F Z 4 75 7 Col) Block Temp: I 3 IF tDay: ,2..0?
Velocity .I2 3
" Range: 2 .
inA/s Pulser. 11 _ nr I Size: . I 5 Frequpency: 2 . 2.5
_ Shape: l.oU4kl Style: GPMtmli AIDrZ14 o
Thennometer SN:
p) Cal. Dfactlin:
[]
17 3 I 0 Axial 0 Circ Daqping: SOO 0 Reject: V F Exam Angle: 7 0 _ Wave Mode: S H EAt 1 Both Rep. Rte: 4. K Freqpiency: Z . Z 5 Measured Angle: 68 Sean Diurctlin:
Fibter. 2 Mode: P LE Wedpe Style: M S 14/ Perp to Weld L0 Parallel to Weld ReE Sens: Ax:-() dB Circ:_+/-JA_ dB WRlvWtdn [ Lnmin-ar 0 Extm Sens: Ax: 6g dB Circ: iJfA dB Cnuplant [E1 Inner Radius Other 1 SDIl Sensitivity: M4/Jq dB Type:-sv0oAJct4 BachNo.: q 5 3 Z5 Each Major CRT Division - .2. , ee Ct1T Calibration In:
, Sound Path f Depth Daily linearity Verification Search Unit Cslde fExamInation Surraca:
lrmtnent Vertical Linearity: N Accpl. C Unaccpt. Type: z & - _1 7 [:1 LD. U O.D.
Ariplitude Control Linearity: P Accpf. nL Unnccpt. Length: 6_ Conn No.: _ Surrfae Ceindition: G Q0 U (J N __
Cauutigination.1 CRV Sketch Recorrinble Indicsiinnq Item TIennometer System Simnlator Check Examtination Area/Weld Acctxa Attached Yet I.h Ne e"n Temp. Serial No.
Amplitude: P,>0 % Gain: gg dB's 21 3olo - 15 EL13o.. 0 -TEE >"
YE 7 73So SweeptPositirm: 3. 3 Syrtem verification when retailling stored calibrations and/or offer each examninalion:
M Yet Li No [ NA RemavrksflReaaone for Incomplete Scant(s) Intumn Ca s S uePLEr 60TA L EXA ri To A'5ss oo E RJ' E LiAAT E C-0V E/b&A Cal. Checks Tinrc
.t'NO EKA~q FAo,- DS 5iatE 17c~ r7o oD Osv p iQ' Initial (blilirntinn 2.. f S 11itifil .R:lik. MNae 4 - 64 Iq q Level: 1f Date: 4 -16 q ttiennelntfe 14 3 5 Exnvminer. '",\ \,, Level: M. Dae: q- I U- f hitennedihte 1 5 50 Roviw~ecm- Iflnftaythenn
,.,, ... \.>..,...- .....
<AIUY~ 1/2 [ii
,.__s
- fnlkto- 0 Reviewers: (Client) UQQ Date: 4 0 Fiuntl Cnlihnrtion t, o0 Reviewers: (AM) ,' //; :B. /ev Further Evaluation Required [] Yes [No Linl Cnlib. Dnate 4 14 - t 9
. RaytlEin Page: (. of Engineers & Constructors t>sva iAL ULTRASONIC INDICATION DATA SHEET Plant: V C S Urr- I E 1R ExaminlationArea/Weld: 2.- 3010- 15 Data Sheet No.: ge ar OcF Examination Surface: E I.D. = O.D. Surface Condition: EI As found I Wire brushed 1 Otlier G R 0 UN D
- 0. 5 Weld Crown Width: 0. 7 WoLocation: tzAELO LoLocation: Ex' R A Co5 Component Thickness:
Maximum Thromni-Wall Dicninsion Search Unit Straight Scan Maximum \VW. Forvard l3ackward L.ocalion T1cRM Direction Ax. or Percent L-l L-I I.-Max L-2 1-2 Souid Path from Weld Stounnd W-l Sonind W-2 upstream or ReR IND. Angle 5 MID 2(Y/a In Inches Ccnterline Path Pesitfion Path popitino, r)ownstIrcnm Amplittude No. IJsed Circ. DAC 21(0 50r/%
10/ 4."cc. u' 0. I 0.25 (A S,
. 60 5 x ____ + _
- 2. 7o S AX I/Ic. A' A C0. I O.65 . , _ U5
.360l A X 170/, / 4 / ____ 0 . g .So ___ Q/
TND. COINENTS Ia. 3 ROor GEOMErRPY SrErq rtxrE m r gr 3 3o Examiner/Level/Datc: Ct C Lev Ir 4- 1 1 L7 Examiner/LeveL/Date: .\ L(A34I Lz . 7 Review (Raplheon)/DaLe:
Review (Client)/Date: AA Furthfer Evaluation Required:
Review (AN.(()Date: 'r..c ci' (@ LjM J r/>,/T Yes z No
Raytiheon Engineers & Constructors page 2 of L Sketch Sheet 0 K VtiuionfUnit V C S5 ,MnrMEIR Project R F -I Report i-o. qqt-r System C. V. C. Proc.edureScE.UT -&E-i Rev. _ Add. i Date 4 /I6 /qq Line No. m /A Drawxing 'No. CGaE - z - 3010 OoST A. Rev. 0 Component I. D. 2 - 3 0 10 - 15 Search Unit Angle CMode 3 o VARI.OU5 I NOICATIJOb1Sh ;Tc % H F . o w F,
EL 50oL/ TEE QDSZO S.(NGM Co*) RFrrT GEGMC~iLY' SEEN NEA1T7N 3 -'- U tj A VL E To -A XI P1I4EIF INVDlCAT I~iJ PUE YO wEL.P C&V'L.,.I'J (DW$ (MGMo~ 70') RooT &'iOE7NY/ SEEW J N7EKMI7rTENT 360-0'-S8pAL ( w)- r~co7- GecmPIL7AY SEEUJ INTJEAUIITENJr 160' I ANIGLES 1-1fASXED IJQ COPC CA0,FkA'rlO,-J EL c- K.
JJ V
Prepared By C, Z, Level -T Date 4 9 Reviewed By /. R Level IC Date 4f-/M4 ?
1+ Refer to attached Ultrasonic Indication Data Sheet
Raylheon Engineers & Constructors page .9f Sketch Sheet 9 O[0GINAL ktaiion'Urnit V C S UMri E 52 Project R F - I I Report No. _ _ _ __ _
Sysem C. V. C. ProcedurescEG-uT i Rev. i Add. i Date 4 /16 /qq Line No. N /A Drawing No. c c E 3 010 oSUT A. Rev. o Component 1.D. 2 - 3 0 10 - I 5 Search Untr Angle GC v7e Mode SE46A '
C-OVCf1ZA&i7 SkETCH TEE .,
A>XIAL £4XAfr D1T VICCICIA C-EA526E:5 (Jk'x *4S) z0. 2.3 1inj
.Z3 vF 5. 4. 4-3 9/
- IJO .01 Cn.1
.- a InI - - CI )- I D c4E' PIkEZTION.AL cCVV1RA&EF.- ICe2/, - 43-3% 2 /. 551/
AxIAL COvEPAAE v 4-3*1 4 .5.ssi) 70. 9si.
C1PKC EX4AM 5
"EXAM. SLIZAACE 'r .5.+ CA ow~N +.* "
A SA ETk AM (JEP .--5'+ Ck AowN+ . 4: 1. 6
- 1.6 vF! 1*7 - __A___
CPAV COVE£ZA&E a 011 (A = h . .5 4 q4)I, .. = g 2 /-
A Level .fi Date . . .
.Level .Z Date 4wf4? 9 4 Refer to attached Ultrasonic Indication Data Sheet I
V Ray~feon IEu~ineers & Constructors Calibration Data Sheet Page-L. 0 Data Sheet Nh.:
Compon~aedyutem: AJE - X~c..TXrp Z ,
O RIG' A ?LP~Y Rev. No. A-1-i No.
I F f- -- Cod. BlockNo.:
..,I?,W I I. OVA Instrument Settingip Search Unit J-,, F7 ALL NIL: 0 Manf/Model: 9 LE / it . Mwarsfachrer: Q I I_-__I i L- Cod Black I'M Sepep Serial No.: 3( I 0 5 M sewialNo,: i f t I I -- I CalUlacitTemp. 0 Dteaor. .~ Range: _ _ . I I -T- I 'MennonteferSN.
Vetochry. 2 . ia/is Pualler. 0 na Preu ecqy 4 Mw: Style : A 4 I I . I I I CW.D**dJ*n. ClAxi.) MCire Dunpig:, O0 C) Reject: 0 FRF EramAngle: ~Q!waveAode: LouaG, I I I I. I 0 Both Rep. Rate: reqpuency; S5 17~ M IT. Memawstd Angle: a -
I F_ I &can DirecHo":
Fiber A Mods: -__U~= MWedg Stylea: ef1 &A - I rl rerp to Weld r_1 rwailot to Re[ So=n Ax. dB11Circ: dB D_ WRV 01 IV Laininard Exa Sesm: Ax: dB4 Cwc: 4 dB Couphant O Inmer Radius 0 Other LI/I SEN Sensitivity. WIA dB Tyes.90J0TECA~4 BaichNo.:9532.5 Each Mrjor CRT Division - -, I Q a rRT Calfhredmat la:
m ozXj TAX-J~b V LI. $8A* R N Sonnd Path 0 ]DeP#h Dauily Linearity Verifica~tio Search Un~it Cs lii Irwaminetion Surfl4co.
bmhtmwnenVerticall inewityVWAccpt. Cl Unaccpt. 0 LD. O.D.
Aaupliiha Control Linenrity-. W Accpt. LI Mnmccpt. Length: L_ __ _ Coon No.: 0 surreco confir"tiod CRV Sketch Rolcoreinhle Tndicetin"n Tten 7%ennewneter System Simulator Check Exitmin0m Ama/Weld Access Attached Vel T N" 006M. Temp. Serial No.
A.VljW.: 01A % Nin: &&JA -
P3:PZ---4EL50%,kY Kj VI' '73 It.- Irl-,J(j sweep position: . Old I- 3 C) I- .3Q '73' 1, I r7.31 Q') ,gyptem verification when recalling On califirntions andlor *Her each 6XVnina 0 ye, 0 'N. Is NA 17, Reeffis/Reamw for 1"Coniples,SCWKI) Instru"M Cal 0 o i i 44 o o z:4 A ,,I o ,j o s x D e- ux r o 0 0 o w c-n tA-Ki%-r m co. Cal. Check-4 Tinte T"ithil Calilw*ti I I.0 0 Initial 01lit). IN q7 Exantiner. 6 =e=_ C-e-U., Level: Ur Date: 4 1 - '7 7 WC17"ediwte - I 10 /A A2&niner! CA - ' A C,.76-Mft ..
Level: :TC Date: q - .7 I Inte"rediRts . I'l /,4 Reviewers: (RRytheon) V I
_ZLV)tdvi*We": (Clif"t) V.&Y - Date: Final CRlibratinn 1.3 0 0 Reviewers: (ANU) z_-:111-Z Further Evaluation Required 0 yes Final CRIN Date 4' -L I - I I
,Rfl.Weon V _
Esgineers & Constructors Calibration Data Sheet COpy Page -Z oflQ Data Sheet No.: f l/_Q16
-,.. a k isomnetric: eG1¶n.
Coavnowo.nentSae: -&Ih ORiGiNAL Procedqre No.: $
Rev. No. I Add.N.
u
-1r-I 5 L Cal.Block No.: ec.-F i_____
Instrmment Settinps Search Unit Msf /Model: y~w /~D.JLL 14 MaaflAchrer: \ Cal Block r: . ______
Scope Serial No.: 1'3,6- O' t Serial No.:_ I_____
Cal Block Temp: BP Del .QL " Range: 1.- 0 Si ze Af~2!51-63PtShope: EC-T Thermometer SN: A-2o1 j_
Velocit. )_ inlnu Pulmer. Qa Freqency: 5fl jj Style: 3i!>.- Q&'I- eO Cal. Dfcn: O Axial U Ore Dw-ping: i Reject: 0 F Exam Angle: q__ wave.mode: O~A O Both Rep. Rude: %641 Freqeiency: 5e H>, Measured Angle: ' _ Seim Directio:
Filtern Mode: g11A; WedgI Style: rfr4 TTSjPkL O Perp to Weld rallel a tol Ret SeM: Ax: Jr IQ dB Circ:7 2. dB O mV O" ti nLminer 0P Exwm Sem: Ax:JP Al dB Circ:._ dB Couplant C Inner Radius a Other A 8tH Sensitivity: JlA dB Type:gOpJ0DTtt Baichlio: Each Major CRTDivision - . I0 a CRT CoHhra*fe" hi:
- . Sncmd Pat n Depth Daily 1Linenrity Ve~rifcatinit Sesrch rhlnt Calble Ftmuinsthw Swr[ien.
Imndument VertierJni iarity: W Accpt. CltUnaccpt. Type: - I 1c L JLD. O.D.
Anplihtie Control Lnewirty. U Accpt. Otlhaccpl. Length: 6 Clownno.: 0 Swrrmsc Coenfutle: G;.lt Conaigisrati ml CR~V Sketch 'eRoorrdaht Tndicationvi Ttem 1%ver.netlr~ System Simulator Check Exarnvination. Area/Weld Acceps Attachied Ve ?I Temp. Serial No. Amplitide: q l % Gain: W( r Sol i- 25 P.T tiTEPou jo'4 Sweep Position: 9- Is System verificatirn when recalling don calibrations nd/or after each examinati UX Yes El No LI NA Raeuuku/Reaa'ons for Incomplete Scurt(s) Ifiumn Ca Carl. Check.s Tlime inifial Calibration 0 2.1S Initinl Cnlit . Date 4 _Z I - q q?
Caniner: 4 4..CIL Level: _ _ 1_ _ Date: _ - _r -_ 7 hItennediate i t Z 0 Examiner: \6'A\ -- I7- . & ', -4. A- -
Level: Jr Dnae: qlI._1 -.. ratennedinte . I Z c7 0 R... t
'2Z-99 Reviewers: (Clieat) t)(,-t- Date: Final Calihrntion 13 5 0 Rerjewern: (ANII) f/'ii 7X72of/ Further Evahiation RequWred El Yes Bo Final Cnlih. Drte 4 -Z - ?
Rayt1ibon Engineers & Constructors Calibration Data Sheet ru P'age - /
Data Sheet INo.: __ 1- ___
Ponecbhre No.: SC -n 3 Rev. No. Add. No.
Tomebic stumen Seting =_-
Cod. BlockNo.:
Search Unit - - - - H- - Dia.: \ _ Mt': ;
Mmifrarer: Vlb AI O, C)4 ColBlocitr:__ _____
Scep. Serial No.: I Serial No.: ;L-ia Cod Block Temp: .- 9 Defar: . 6_120 "Range: I.~ Size: V Qa6)Shape: PNIEC-T r'hermonoeter SN: fi I Velocity .)' ili Poilser. no0_j Freqnency: 5 P4 A Style: _t2 D I 90O .
Col. DlredJn: 3 Axial 0 Circ Dmiping:;OOO Reject: DF Exam Angle: 0 Q Wave Nfod.: L ob.G-s Rep. kame: Li VV Frequny S'-4* Measwred Angle: 5 ob Scen Directlen:
Fihr~I Mode: b~PL WedfStyle: ;ni3L T;JI X rerp to Weld l arallel to v ReESenu: Ax:,aj 'lB circa. Lij. m El WURV o4 E Laninar a" Exwm Sens: Ax: 9 '7 'l dacirc:I/A. dlB Ctsuplant E1 Inner Radius n Other -/LA.
Type: 64a!4 BelchNo.: 9jLj5 EachMavorCRTI~iviuion-* 11)-S OT C611%rollnu tn:
- sriand rath 0 Depth Daily Lintearity Verificatio" Search Unit Cable E!.xninstlon Surfoca; hauiuunins Verticail Lintarify. II Accpt. 0 tUnaccpL. Type: ?LNG j % j _ o I.D. 1 O.D.
Anplittide Conlrol Lin.suity. II Accpt. 0 Ussccpt. Lensh: .LaL ConnNo.: _ __ Sturfe Coendiin: ts. DL0A.AD_
Confiuratiostf CRV Sketch Reer.,wlahle Tnd~cain,,e Tfeuvn Thernae System Simiolator Check Exavrnirntioin Area/Weld Accowt Affnclsed Ye, NO Tensp. Slerial No.
Amplitude: 1C) % OGain: Q c0 IC>% I 1- ;g% ELGO~f -- ,-VALVE YeV, rn .19An Sweep Position: _
syrtem verification when recalling tOm calihrationt and/or after each eximnitntai 3 Ye, [3 No U VA Reowice/keaowws for Incomiplete tlcur(t) bou~ ics F-P-o"- D£4 $='v OD GiE~atfETPY CRl. Checks Time t0O-)APtM MLEL17 rni.inl Calibrafion 0 9 3j fnifiaf Cnlih,. DMte 0 - ;l.I - 9' IeVel: I_ Itnennedi"te I I 3 o
\&
Examsiner:1 Examinur: rt.) A Level: = 1,,ennedifte .I I 4- 5 Revlewer: (Rytheo)M ;10 /.th. Date: 4Y'Z- "?Reviewers: (Cl Finnl Calihbrionn 1 3 5 2.
Reviewers: (NM -} d Oate:_, ~=7:'1F/P Finn1 Cali. tfe 4--2.I - qf
. M
-Rayweon--
tlq-b-Eigineers & Constructors Calibration Data Sheet pose _A Data Sheet No.: ___f ItZilo-1 hse t'eric: e-r E - Q L i O OR~IGINAL ProceAre No.:
Add. Nil. -1
?k9_
Rev.'No. -_L__
Cal. Block No.: 5--
litstrument Settingsi Search Unit MUftAcher: P TEoTrcH, caj B1.ck -r: Lf 4 9
! j Seriato.:_IA X3 3 1____ FY Cal Block Tamp: 2)
Sceps Serial No.: j D O
.2 ~O Rage Size: . ;2 5 Shope: 2 tt _ 'MarmomefergN.
Delajr Cal. tAr*dJ*n. X, Avi-l C3 Cire Velocityz:. inhyx Philser ~ oa.. Prque"nc: 21Sm ux Style: !j e_
0 Both Dvmnping: SO 0 Q. Reject: 2fF _ Exani Angle: tDo Wsv" Mode: Aa on Measured Angle: Scon Dfracda".
Rep. knle:'4x%(4t Pruriency: 1,5"'-
errMoae: /v Wedg Style: _+/-ILW_ rerp to Weld0 Pwalfel to
'Fib 0 MitV d, C-1 Laminar n Ret Sens: Ax. 1 dB Circ:I_1AL dB 0 inner Raclius 0 Otber Exum Sents: Ax: dBSOlre: dB Cnuplant EchMrjnrCRTDiviAcm- .(Q . CRT Calthroffolt In:
48B Typs:sgl! d_ BeUlchNo: I ,
SEH Sensitivity: OJIA a Sexind PA 0 Depth P'Tafflf"afforn Awfacol:
Daily litenrlty Verification Search Unit Catle 0 LD. WS O. a bi~nironeat Verlicail Uhnearity: W Acept. 0 tUnaccpt. TLe: C, _
CNo.: : s1wristo ca"40"":
Anpiltude Control Lmnesulty. W Accpt. LI Elmiccpt Length: _CsA _
¶ System Shnitl2tor Chect Amplihode: 4 S % Ciain: .5,1 -
Ex.finiinntiewn, Area/Wel'cd sweep rnfifin": G -to -
,qyPtem verificatirm whe" fecalling Pt, a- _2 j ol I-3 g4 ELe)oLJ-.yAjLaf crjibrmionw mN*r after each 0 I
= ye, [3 No [3 NA 6 Inshim. W Cal 0 1 2,L_
luawksmaapmW for Incomplete RemM
, ;L_ 5c) i 1-,3 44 K,O Fx^H 0,j ()A #tT_0E. D(LE ro OD C-o,,--1PTC-nuJ1Pvrzo-J. Cal. chock-5__ I - Time Go 8 paZtJANr t"IA AOCnLE DUA ro Lxmvreb OJ L46' BA3rb W T"ifiel Calilirati 0-9 C4 0
, "Eb fnifint (Will. DO. -
-r%-jT.u<QroSS AQD WSLb -014 - al fi
.97 nt,: 4 - 2. F- I 7 #-. - 114- 4 A__
Level-ExMinw. _crazy',,-, - Dide: .1 1 1.5-1 ftilem"edivite
- L ( r)
--L ")ki,, t-Level: r-, I/
Fxuniner. 6D-N-_ Finnl Collihndi 1 3 5 -
II", . -0 4e,i 1%
v 1 ,2z-?9 Reviews": (Client),- - - - - -- - Mit:
Reviewers: (Itolythen") . -- .1,V , 4. - 2.1 - I I 0 yet .F;nnl colih, Mite 4 - . 7 . . I,1:1_V1r-z1_ Fwther Evskjotlon Reqt*ed Reviewers: (AM112 _;111 __ - :1 _
A_
Raylheon' EvUlneers & Constructors Calibration Data Shuet ow rose $5 o Play: veP -K1 S Data Sheet No.: OI latbrufic: tGA E. Z-Q ORi 0 ProcedireNo.: C" z 5j Rev. No. I AddL NNo.
Cal. Block No.: gk,15_
Instrument Settings Search UnUt Dih.: 14. 0 Mnll: 5
)MCnf/Modeh$l: kA'F/jJ v: IS Mainfat~w - A e IQT j 4. Col Blnck T: . t44 Scope Strial No.: I serieilao.: -4 Col Blocl Teop:
Size: Zs ___shope: Es JJ Thennomdeer SN:
P~eqnewery ~~lzjatz style: .Gi&!ttJA_. Col. DfroctJmn: N Axial 0 Citr Danping: _UCJQ Reject: _Q FF Exam Ansgle: .z D Wave gMode: ~JB n Both Rep. Rods:ekp4e. Pre~monerL Memwed Angle: L Sea" Dbref]*11:
Fier~ a. Mode: U . Wedg 1Style: 3 rerp toWeld a rarallel t RdC Sens: Ax-. (x dE3Circ._hJI5 dB O MRV o" r:i TAmi,,,,W Emw Sewa: Ax: WV. E8 Cic:Q Jjk d1 Coupimot O Inner Radkis Q Other Bif Sensitivty: *LLJ1A 1 Type:L6u3DT-JLA Boichwo: 1 Each MWar CRT Division - . 5 w CRT Cethrs In"two:
3 a Smmdrah Q Depth Dully Lfutearfty Verrifcatloo, Search Unit Caltle Kwenl""tlo swrac:
Ibdmmrg Vertical Linearity: '% Accpt. Ci Unhccpt. Type: 9,C -I ' [E LD. 3 O.D.
Amplitotto Control Uneswity. if Acept. LI tiwocpt. _ _ _ ,C
_ _ _ _ _ ont' No.: Snrfico CnifGtin,": G o n Cnnt~~iralnnCRV~flretcJh Reenr.4EAIC Tn~fcumtift"a Rem nienmnmefer System 81miulator Checl Exnrminnfirn Aren/Weld Acceas A~wemlied ep ' erial No.
Ampliftide: 'RI) ' Gain:
- sweep Position: -N,3.....
a-N30n-3 ~~~~~~~~ELAOLAi-"/ALV r YEA V q IV73i09 S4ysemt Verdlicomtio Vwhen tcalling WI calihriatint ondlor after each exurii W1 yet EL] Wo E NA Rtewrku/Rat son for Incomplete c nsI,. me, Ca U
- a- 3 OilI- 2P4 Qj0 EXAM cQ .b %EDoe DAAET O Cw TLxPAtxArzLOJ. 6bWnCa 1 Col. Check.4 TIme fnital Calu10wotin" 09 s ity 9UPpLeme.JTAL- !)Av-4 TO A 4.4uAE A,0PGUA1E COfV3E-AWE. Vnit al Ccl i i,. 1, ,
Exuminer, - Level: XI- Dite: 4 - 7.?- '77 fnferinetfiw~e I 2.3 Extminer: G.Av -J I 1& -A*A Level; --W' Date: ~- 1 Wne vvwedinle . 1 2. 5 Reviewer.: (Ratheo n v 4 Dia: _,2Z 7heviewerv: (clientL.... & a.. Defte: IVAl Fioni Calihralinn 1 3 S, Reviewere:( i) ' , Date: 5 E4~, NE ~Furthef Evaktietlon Required El Yes N~io Fi""l colii'. Date 'P 2.1-
RaiytIwn a Page. ' 0t1t Engineers & Constructors ULTRASONIC INDICATION DATA SII T AORIGINAL Plant: '.C. 5limS- Ie n Examination Area/Weld: 7- 3 011- 33 Data Sheet No.: q9q r-o0 Examination .Surface: = I.D. E O.D. Surface Condition: = As found z IWire bmrshed [ OIther &G.0 0 NJ 0 -
Component Thiclkiiss: 0. 3 8 - Weld Crown Width: 0. 55 Wo Location: £ _______ Lo Location: E x 'r ') 'S Maximu~m Thrniyg-Wajj I)imensioens Search Unit straight scan VBAckwarri Location flcatm Maximnum "W. Fonrvard Oircetion lipstramn or RIMR L-VMax V.2 V.-2 Smind Path froin Weld Sovind W1 Somiod W-2 IND. Angle Ax. or Percenit L4-1 L1 2MA In Inches C ncrterine Path pokert'n Path Pr'pilinn D~ownstxcarm Amp'itiidc NO. UJsed Circ. T)AC 2"n 50MA ____ 5fl 0 ?V 7. 0.4 D5 0 A S 07. ___ Io(4, c-., P..! _ _
Ir_
II' .,A O. 5~ 0. 7", <3 q _ _ (1 S 3 '7' A) y f Z 0.
. CIS O. -5 4.. )c 7 7o/ _ __ _
TNA) COMW{NTS 1,2.3+4 Roof a EOMC'"EA7'.. SE*EA4 M3Ep~p-~~j 467*
Examiner/Lovel/Datc: ~ -,1L, et .
Examinenr/Level'/Date: 6%..4 4. (.
Review (RaythteorO/iDatc: -Z -
Furtiher Evaluation Required:
Review (Client)/Date:
~ N Review (ANH)Dtc1j Y 4 ~Yes
Rayiheon Enigineers &. CoOM A-Ir 17age of Sketch Sheet 0 IORIGiNAL I0tion/Unit v.C. £cAn FRP. Project R F - II Repoyil o. - qq -015 Swyim S. T. ProcudurexEC-7T- Es-I Rev. i Add. i Dale 4 12. /9q Line No. N /' DraNing No. c - E - - oIi Rev. o Component 1. D. 2 - 3 ° I - 3.3 SearchqUni Ange 6-.t ode 4i R I NID fCA TIC M s£kETcI4rc F L 0 Lt./ t,_
P I PE E L V c ,
OQ !3sOS(NCM 6r) rkrcc- GE.TF, SE-fM ,Nt7EIAi-i'rrrHT :
0 WS (Mom _JC") X00'r C-ECME-lkY .5EPJ INTE'itMlYrENT 3 (O'
A Prepared By s22 -e Level ff Date 4 -2I (- 'U Reviewved By _ _ __ _ Level ,j Date f~-22--99?
P Refer 10 antached Ultrasonic Indication Data Sheet
I0 RaytWo I 0 Page: L.. of s Engineers & Constructors ULTRASONIC INDICATION DATA. SIIEET I S' DEO RIGI NAL Plant: V C 3u mmE R IxamitationArea/Weld: 7.- 3011- 3 4 Data Sheol No.: w7U7-o/5 Examination Surface: = I.D. [E3 O.D. Surface Condition: C D As found z Wire brushed 1M Other . Z0 CO J D Component Thickless: a. 4 L2" Weld Crown Width: 0 4 - Wo Location: £ Lo Location: E x ,r ,^A:' O?)
~~~~~~~~ ~ ~~~~~~~Maximulm Thrmaih-W I Dimnsiotig Search Unit Straight Scan B~ackcward L~ocwatio TIcRMi Maximum W. Forward 1)ircction Soun1d W..2 lUpstramn or RT4R L- L-1Mlix L'-2 L-2 Smound Path from Weld Smind W- 1 IND). Angle Ax. or Percmit L;-I NNrijion, Dovnictream Amplitmle MAl VrY% In !nches Centerline 1n,111 Positien Path NO. Used Circ. DAC 20 ____
1 60 A ~ 4'A 'J ___ e-0~
" 9. 7' ___ __
7- -70$ A) l' Ir~/ ____0 A e4r. V. 7S- O*5so___ _
3 WRL~t AxX zool TNT). ~~~~~~CO1{WINTS 11*2.3 P, 0o7 C teo -ier V ,4prEtr.~ rr C_t r 34 ExaminerfLevel/Datc: Ce-lo if,, 4~- - ,7 Review (Raytheon) `Date:V4. -9 Further Evaluiation Reqiiired:
Review (Client)/Date:
~ Yes =-*'*No Review (ANU)fDate:
taytheon Engineers & Constructors page of ID loh Sheet (Z'; 0 %lr tiaicn.1 ln~it v c. s*c ArE P Project R F- II l~pon No. -_ ,1iTr-ols Ysltem S. I . Prooted-ure _.Ec.E&- "I- El - I Rev. i Add. i Dale 4 /la, / s q
.Inc No. N 1 Draving No. Cc E -32011 Rev. o c'rniponmnl1.D.2- . cj- 34 Search Unit Angle
- Mode it
_ vemicus KIDI CA T'JO S hE £TCH ORIGINAL
. -F Lo0 t-, t%.,
EL 1V t.- v, AL V E
£3' .5 (JJom. W) &r~vT GEC sEl Y' SEEN. Ij.J7rjK,#1i77EI.JT o
© cz*s (Amcm. 70 Krcv1, C-f&'ic7,Py 'SEEN ,5N..7ipdITTENr 36?,
(Ds>Ri. be,-) 1nvr & reigf7&Y SE fJ I~if& I 1,7 EJ7 lAN (cDe CALICAA7UCN eLcck.
IpPrepared By' C,-Otlc- Level 1U Date 4 - 2 1- 9q Rueiewed y itY7L Level ,7- Date 9?z-f f Refer to anached Ultrasonic Indication Data Sheet
1aytheon Engineers & Constructors pageLof /0 scIh Slbee~t M3llonftl V C s MMER. Prciect R F- It Reporl No. 9ur-h0/5 rsvlem 5. 7. Proc-e-durexcE--yT- Eq-I Rev. t Add. _ Date 4 /Z /!q Line No. N 1A Draiving No. c c E -I - a c 1u Re. o Component I.D. 2 -CI- 3 4- Search Uril Angle it Mode Ok VsaJQCVs COVERA~GE S~rETCi4 ORIGINAL EL Ec VAL vE a TW0 V,A~cTD'IUPAL ccvE~APC-E - . 5 (.4-'. K -s I -, c- I 6 I ,I-0 .1 IF ss 2 d'1.
- KJv cvVE KACE z-S(-2-- '
a . c3' P . S5 0 ' 5 -I.
- £&.J9 DICEcTi'CNAL COVER.A&E 4: lo O 7. , Z I /- - S I. --
- A kIAL ccvEZ&,CE Z¶/I'. + I s (w /.) -- z /.
OCt EKAII
. CVVERIZC-E ' LcO/Y.
C O V E IZ iC, 'E
- ( 4 C)/,- ( z~-
c f cc -/ ) A :- 8 f!. c t V Prepated By ci,-t4Z-, Level D Date 4-z1- qq Reijewed B Level-12r Date
'A Refer to attached Ultrasonic Indication Data Sheet
Document Control Desk Attachment II 0-C-02-3202 RC-03-01 97 Page 1 of 3 South Carolina Electric & Gas Co. (SCE&G)
Virgil C. Summer Nuclear Station (VCSNS)
Relief Request RR-114-10
Subject:
This relief request provides the alternate requirements to Examination Categories C-A and C-B as qualified by Code Case N-460 of ASME Code, Section Xl, 1989 Edition (henceforth Section Xl).
Components:
ASME Code Class 2 welds in pressure vessels requiring ultrasonic examination.
Code Requirement:
Table IWC-2500-1 for Examination Categories C-A and C-B requires pressure vessel welds to be ultrasonically inspected each Interval. Each selected weld is required to be inspected essentially 100% of the required volume. ASME Code Case N-460 qualifies the ultrasonic examination when at least 91% of the required volume has been achieved.
Relief Request:
Relief is requested from achieving 91% of the required volume during performance of the ultrasonic examination when component design and geometric limitations preclude a complete exam.
Alternate Test:
To the extent practical, the weld required volume and base metal area, Figure IWC-2500-1 as an example, will be ultrasonically examined. Each weld with less than the allowed 91%
coverage shall have a detailed description of the beam angles used and the extent of coverage achieved. For welds identified in the table presented in the following Basis for Relief that do not achieve the volumetric percentage specified, a relief request will be submitted.
Document Control Desk Attachment II 0-C-02-3202 RC-03-01 97 Page 2 of 3 Basis for Relief:
VCSNS is presently required to perform component inspections in accordance with the 1989 Edition of ASME Section Xl. The general design of the component surfaces may have ultrasonic scan interference caused by inherent manufacturing geometry or obstructions that preclude access to the weld area. Examples of these vessel configurations are nozzle reinforcing pad interferences, vessel head transitions, nozzle radius transitions, and non bolted obstructions. Examination of all accessible areas of each selected component ensures the integrity of the component and provides an acceptable level of quality and safety. Each selected weld shall be examined to the maximum extent practical to Include the use of multiple angles and beam paths. Specific welds requiring relief are listed below:
PERCENTAGE WELD ID CATEGORY ITEM COMPLETE LIMITATION CGE-2-1110-11B-1 C-A C1.10 83% Nozzle Reinforcing Pad CGE-2-1 110-1 B-2 C-B C1.20 83% Nozzle Reinforcing Pad The accompanying drawings and data are provided as supplemental information for this request.
Implementation Schedule:
The proposed alternative is requested for the second 10-year inservice inspection interval. The second inservice inspection interval is scheduled to end on December 31, 2003 with the final inspection outage, Refuel Cycle 14, to be implemented starting on October 11, 2003.
Document Control Desk Attachment II O-C-02-3202 RC-03-01 97 Page 3 of 3 Sketches, Drawings, and Inspection Information For RR-11-1 0 CGE-2-1110 UT Data Sheet VCSU-1267
I CGE-2-1110
-5A/58 Fi llet I I- INLET Type"D" WeldCantfiguration Detoll 'A"
'ERIAL: .696" MIN.'T' SA 240TP304SS LMETER: '39.75" tCUArERENCE: 124.876" IZLE TO VESSEL WELDS: 10" DIAMETER LDED SUPPORTS: NOT APPLICABLE TING:6 44-1.25" DIAMETER tEFERENCE: CENTERLINE o0 10" INLET NOZZLE E: HEAT EXCHANGER IDENTIFICATION PRECEDES WELD AND SOLT :
JElStor ll witch E r ~Gear I BOLTING Room I
OUTLET 10" li 1 AB Access Doors 2
4 Plorrt Locotion AB - 412
)" OUTLET NOZZLE REVIS C)N I DAT D ATE MPS 8__ _
______________ ¶-l'I 1 1q q,j R?--/
3oz 641- 'B-07
I
-- QRIIIGINAL MATERAIAS TESTING AND EXUIM!4A?-r ULTRASONIC CAUBRATION DATA ROJECT VC. SO M MEm r - A DATA SHEETNo. VDATE SYSTEM h%-,- . PROCEDURE 50- ..
-U- - 5-9 - I RE.~y I COMPONENT OR WELD IDENTIFICATION TEAP, GAUGE ID RtECORDA1t.E INDICATION alo 5Z5
- -l~l0-I~~~3-/
. ~~~ ~- & . I- P 'A , _ I__
_VIA_ _
-Ai.6LOCKNO. CG~ N..a~ ? 1043NOTCHES fr p EXAM COVERAGE D
9 10 00 i 4 00 WHA 40- SASE MATERIAL -ZU2AL 2Z'CIRCUMFERENTLA Z SIZING '9 OTHER A EQUIPMENT DATA SEARCH UNIT INSTRUMENT Mandarour gi -dacxo L~t 4,,
S a . me g st~ 6 Asinle e~htLJ~~ Dust SJora Cable' Serna No. ___3__1__4_ - __ Froquncy Repac Size(s) 'iz" Frsq . Rep RuSe 4 1017. DnmpnQ 5 Mglo .t.=~ M ocAe R dB Gain: Coare -A FinC 3 eta ANI Batc --o. pdnmay Referonce'Response Coup ath No.: °Anptx udl % fvRScreen Height 80% FsrSP bFoF a m I DAC PLOT-TIME 7 6 jj)OPYI CAIBRAlION CffECKS 1 00- AMPL: 20% (dB) SWEEP + So% OF 9 1 - j _ _-_
- - OF INITIAL AMPL INmAIL LOCATION
-° ==-;S>lf ==- T=E ~YES NO NO 70 7c - _-
1 _ _S s a1A_ callhv
% FSH S0 -_ _ - - - - l 20TetA-LML2 _ DATEd 10 __ - 2 / TC1iA LEVEL DATE I III REVIEWED 0 1 2 34 S 6 7 9 10 DAT
_ _ ,, 1. J-DAE9/#s SCREEN SIZE: £s2. 1nL 2.- . DATE, NOTE: whenperfnng xanaznonswdereroDACisrwe4 _________/___ AT Indicate reference reflector Iocauon and afftmrde &bo~v. ANI________________Ir
-TY.De i91ue -ro 4/A!r0ev.d AY1/41- 4CX/MX- IAI'-n, AZ4r&'D~~~
Dd 4C eer~d hO' .sc"v".~--,A/ AUy -ex4 Ahia,- o I
I
I II ORIGINAL -'PAA-f tLOF-3 RHR1 SAEAT EXC4AN4LER 0 iWeWd Ag-- I 11o - 1(I iz-)
III!,,.
I-UT. SCAO4Llft'TArrUOKM Top VtVJe, vielp *I We v IDi2-PLATC (ry9. 2. PLeN7)
ARUE rypVCAL A~ PtLACS.~
Etmr VievJ NTS ~ ~ ~ 4. 6 Bts .
tAA "y 0L
sos"4w
. £a b9 ORIGINAL UT INSTRUMENT PERFORMANCE F'6 3oF'3 om.>09J?5cVL 6 W.Aft%- %LA~Az-.ft&4Wu4xL Zf (J'7~--e9- se-0 I13Cc - AC7 -- - 7r- gP-.2 R-0 AMPLITUDE (SCREEN HEIGHI) UNEARITY AOCEPTABLE uumI SCREEN HEIGHT SCREEN HEIGHT LARGER NDIOCATION SMALLER INDKCATIOW mhig low Ss ds so 40 so 340 As 15 70 do 30 15 2S so 30 20 40 Bo Is- 25 Is 20 so
- -10 -- la S
,SI S a
- 10
,Mu*st bea5% efah. verrAmpthud's. wfithn 4% OfFug SCM*A Height INEXCATION SET ~AMPLITUDE CONTROL LINEARITY ATA IND(ATIO SET dB CONiTROL IN i'CA IO LIMITS T A AT %FSH CHANGE %F&H %FSH so 64a 32 to 48 _ _ _ _ _ _ _ _ _ _
so .12d3 16 to 24 q 40 06de ~~64 to96 so) 20 .12dB3 64 to 96 8.¶L UJOCAflON SET CA14 START CHANGE TO ACTUAL AT% FSH COARSEW2S COARSLd2di ~FSJ so SW~O 4Of d so 4W O1 20m
[A=zPTAILLf W.Ce Lin.ae y _____
Aue v CortfoILormuy I
Document Control Desk Attachment Ill 0-C-02-3202 RC-03-0197 Page 1 of 3 South Carolina Electric & Gas Co. (SCE&G)
Virgil C. Summer Nuclear Station (VCSNS)
Relief Request RR-11-01 1
Subject:
This relief request provides the alternate requirements to examination requirements of Tables IWB-2412-1, IWC-2412-1, and IWD-2412-1 of ASME Code, Section Xl, 1989 Edition (henceforth Section Xl).
Components:
ASME Code Class 1,2, and 3 Inservice Examination components.
Code Requirement:
The 1989 Edition of ASME Code, Section Xl, Tables IWB-2412-1, IWC-2412-1, and IWD-2412-1 detail the Interval selection percentages for those components subject to examination.
Relief Request:
Relief is requested from the maximum percentages of examinations credited for each period.
Alternate Test:
SCE&G proposes the use of ASME Code Case N-598 for the maximum percentages of examinations credited for each period. The schedule for the inspection periods, minimum and maximum examinations credited shall be in accordance with Code Case N-598.
Basis for Relief:
VCSNS is presently required to perform component inspections in accordance with the 1989 Edition of ASME Section Xl. Tables IWB-2412-1, IWC-2412-1, and IWD-2412-1 of the 1989 Edition limit the components in an examination category that can be inspected during a particular inspection period. Examination categories that have small numbers of components, essentially less than 20 components selected for examination throughout the interval, are difficult to schedule along with other components in consideration of the ALARA concept.
Examination schedules are optimized in many cases to perform a number of inspections in one area to reduce the radiation exposure of inspection and support personnel. Relief from the restrictive percentage requirements of the 1989 Edition in accordance with Code Case N-598 will directly aid in the reduction of personnel radiation exposure. The proposed alternative in accordance with ASME Code Case N-598 provides an acceptable level of quality and safety while reducing the overall exposure.
Document Control Desk Attachment IlIl 0-C-02-3202 RC-03-01 97 Page 2 of 3 Implementation Schedule:
The proposed alternatives are requested for the second 10-year inservice inspection interval.
The second inservice inspection interval is scheduled to end on December 31, 2003 with the final inspection outage, Refuel Cycle 14, to be implemented starting on October 11, 2003.
Document Control Desk Attachment IlIl 0-C-02-3202 RC-03-01 97 Page 3 of 3 CASE N-598 CASES OF ASMF BORER AiND PRESSVRE VESSEL CODE Approvat Data March 2,1S98 See Numerk Wndex for apration and any meffrmagon date&
Case N-.59 Alternative Requirements to Reqired Percentages of ExaminationsSection XI, Division 1 Inquiry: What alternatives to Mhe requirements of Tables IWB-2412-1, IWC-2412-1, IWD-2412-1, IWE-2412-1. and, starting with the 1990 Addenda, IWF-2410-2 may be used in selecting the maximum percentages of examinations credited for each period?
Reply. It is the opinion of the Committee du. as an alternative to the requirements of Tables IWB-2412-1.
IWC-2412-t, IWD-2412-1, JWE-2412-1, and IWF-2410-2. the following table may be used fbr the maximum percentages of examinations credited for each period.
Inspccdoe Period, Cpt~endar Years of NMiimutm Maximum bnspection Plant Service Examiualoans Examinations taterVal Withi *c tnawavl Cxum~oemu, % Credswd, %
All 3 16 s 7 so, 75 to 100 - too rCYF:
(1) if the fint Weiod completion percentag for uniY examination caime gory exofeds 34%, at least 165 of ihe required exawninamos sahll be peiftaried mu due second period.
1001
Document Control Desk Attachment IV O-C-02-3202 RC-03-0197 Page 1 of 6 South Carolina Electric & Gas Co. (SCE&G)
Virgil C. Summer Nuclear Station (VCSNS)
Relief Request RR-11-012
Subject:
This relief request provides alternate requirements for bolting inspections as required by Table IWB-2500-1 of ASME Code, Section Xi, 1989 Edition (henceforth Section XI).
Components:
ASME Code Class 1 bolting requiring examination.
Code Requirement:
Table IWB-2500-1 for Examination Category B-G-1 requires ASME Class 1 bolting to be ultrasonic, surface and/or visually inspected each interval.
Relief Request:
Relief is requested from the following items:
a) Table IWB-2500-1 disallowing the deferral for Item B6.10 "Reactor Vessel Closure Head Nuts", Item B6.20 "Reactor Vessel Closure Studs, in Place", Item B6.40 'Reactor Vessel Threads in Flange", Item B6.50 "Reactor Vessel Closure Washers, Bushings" and Item B6.180 "Pump Bolts and Studs".
b) Table IWB-2500-1 Item B6.10 "Reactor Vessel Closure Nuts" required surface examination.
c) Item B6.20 "Reactor Vessel Closure Studs, in Place", Item B6.30 "Reactor Vessel Closure Studs, when Removed", and Item B6.180 "Pump Bolts and Studs" examination volume as defined by Figure IWB-2500-12.
Alternate Test:
SCE&G proposes the following alternatives:
a) Performance of the ASME Code Class 1 Closure Bolting examinations had been defered to the end of the interval in the previous interval. Performance of the current interval examinations are scheduled for the final outage of the interval, essentially the same as for the first interval. Because of maintaining a repetitive schedule for the examinations, those examinations required by Items B6.10, B6.20, B6.30, B6.40, B6.50 along with Item B6.180 will be performed concurrently at the end of the interval.
Document Control Desk Attachment IV 0-C-02-3202 RC-03-0197 Page 2 of 6 b) The application of ASME Code Case N-627 is requested to perform a VT-1 examination of the Reactor Vessel Closure Head Nut threaded surfaces in lieu of the surface examination.
c) The application of ASME Code Case N-307-3 for the reduced examination volume and performance of a VT-1 examination in lieu of the surface examination.
Similar requests have been granted by the NRC through TAC NOs MB6352, MB6353, MB6354, MB6355, MB6356, and MB6357 on April 2, 2003 and by TAC NOs MB3060 and MB3061 on July 2, 2002.
Basis for Relief:
VCSNS is presently required to perform component inspections in accordance with the 1989 Edition of ASME Section Xl. Later Editions of the Code along with Code Cases have addressed the required examinations with alternatives and scheduling options. The particular justifications are as follows:
a) The 1995 ASME Section Xl with the 1996 Addenda have allowed for the deferral of Category B-G-1 examinations until the end of an interval. Table IWB-2500-1 of the 1989 Edition does not allow for deferrals. Adoption of the 1995/1996-deferral option for category B-G-1 will provide an opportunity to examine the components whenever they are removed. Examination upon removal greatly reduces the personnel radiation exposure and allows for in depth analysis of any reportable indications in an uncontaminated environment.
b) In ASME Code Case N-627, the required surface examination of the Reactor Closure Nuts can be replaced by a VT-1 Examination. The interior surfaces on the closure nuts are difficult to clean for the wet magnetic particle test. Improper cleaning may lead to false or masked indications. The extensive cleaning also creates additional radioactive waste products and an undue manpower burden with no discernable increase in the quality of inspection of that detailed in Code Case N-627. Performance of the VT-1 examination will reduce the radioactive waste generated during the cleaning process without reducing the level of quality or safety of the component.
c) In ASME Code Case N-307-3, the required surface examination of the Category B-G-1 bolting can be replaced by a VT-1 examination. The cleaning of the threaded surfaces is labor intensive and creates substantial radioactive waste materials. Performance of the alternative VT-1 examination will reduce the radioactive waste generated during the cleaning process without reducing the level of quality or safety of the component. Code Case N-307-3 also reduces the required inspection volume to the higher stress area of the bolting. The requirements of ASME Section Xl, Appendix Vil will be implemented through qualified personnel, procedures and equipment systems via the Performance Demonstration Initiative (PDI) program. This stringent examination requirement
Document Control Desk Attachment IV O-C-02-3202 RC-03-01 97 Page 3 of 6 provides a higher level of qualification for an increased level of quality and safety in the component.
Implementation Schedule:
The proposed alternatives are requested for the second 10-year inservice inspection interval. The second inservice inspection interval is scheduled to end on December 31, 2003 with the final inspection outage, Refuel Cycle 14, to be implemented starting on October 11, 2003.
Document Control Desk Attachment IV O-C-02-3202 RC-03-01 97 Page 4 of 6 CASE N-627 CASES OF ASME BOUR AND PRESSUE VMEL CODE Appivsf Datae May 7, MS S Nunear ndex for e&pVlra n and ny finneton dsa&
CasC N-627 VT-I Visual Examination in Lkeu of Surface Examination for RPV aosure Nuts Section Xi, Division 1 inqi'y: What alternative examination method may be used to examine RPV closure head nuts in Neu of the surfac examination required by Table IWB-2500-1, Examination Category B-0-1. Item B6.10?
Rejpy: It ib the opinion of the Committee that a VT-1 visual examination may be used as an alternative to the surface examination required by Table IWD-25001., Examination Category B-G-1. fterm B6.10.
1089
Document Control Desk Attachment IV 0-C-02-3202 RC-03-01 97 Page 5 of 6 CASE N-307-3 CAWES 0WASM1E 1OLEU AND PRESSURE VESSEL CODE Approval Dati: Mach 21. 2001 S. Nuffeo Index fbr .xo~rton and any asfrnyration dares.
Case N-307-3 Ultrasonic Examination of cum I oting. Table IVWB25-I, Examination Cutngry 3-G-I Section Xl Division I bady.: When ultrasonic examinations we conductd firom the end of the bolt et stud or fomn the center-drilled hole of bodts or studs to satisfy the examination tequninents of Table MWD-2500-l, Examination Cat gory B-G-I. may the examination volumne be limited to the cylindrical region defined by A.B-C-D-E.F-A In F4i. 1. and may the surface exumination trequiremt of Table IWB-2500-I. Exnaniation Category B-G-1, bIem Nom B6.30. Reactor Cbs"M Studs when removed be elirinated?
Reply: It is the oinion of the Committee *na when conducting ultrasonic examinations fom the and of dte bolt or stud or fom the center-dlled hole of bolts or studs to satisfy the examination requirements of Table IWB-2500I', Examination Category B-G-1, the exami-nation volume may be limited to the cylindrical region defined by A-B-C-D-E-F-A in Fig. 1. The sface examination requirement of Table IWB-2500-1. Exami-nation Category B-GU-1 Item No. B630, Reactor Vessel Cosure Studs when removed, may be elinmnated.
491 SUPP 1 - NC
Document Control Desk Attachment IV 0-C-02-3202 RC-03-0197 Page 6 of 6 CASE fconflnued)
N-307-3 CAME OF ASME 3OMLU AN4D PRESSURE VESSEL CODE FIC. I REVISED EXAMINATION VOLUME Supp. I - Nme 492