ML22200A081
| ML22200A081 | |
| Person / Time | |
|---|---|
| Issue date: | 07/19/2022 |
| From: | Anchondo-Lopez I NRC/NRR/DNRL/NVIB |
| To: | Angela Buford NRC/NRR/DNRL/NVIB |
| Isaac Anchondo-Lopez-NVIB 8172001152 | |
| References | |
| Download: ML22200A081 (5) | |
Text
UNITED STATES NUCLEAR REGULATORY COMMISSION WASHINGTON, D.C. 20555-0001 July 19, 2022 MEMORANDUM TO:
Angela Buford, Chief Vessels and Internals Branch Division of New and Renewed Licenses Office of Nuclear Reactor Regulation FROM:
Isaac A. Anchondo-Lopez, Project Manager /RA/
Vessels and Internals Branch Division of New and Renewed Licenses Office of Nuclear Reactor Regulation
SUBJECT:
SUMMARY
OF JUNE 28, 2022, COMMENT-GATHERING PUBLIC WEBINAR REGARDING THE DISCUSSION OF ADVANCE MANUFACTURING TECHNOLOGIES DRAFT GUIDELINES DOCUMENTS On June 28, 2022, the U.S. Nuclear Regulatory Commission (NRC) held a Comment-Gathering public webinar to allow the NRC staff to discuss two draft documents titled, "Draft Guidelines Document for Additive Manufacturing - Laser Directed Energy Deposition,"
(ADAMS No. ML22143A951) and "Draft Guidelines Document - Cold Spray" (ADAMS No.
ML22143A952) under the agency's Advance Manufacturing Technologies (AMT) Action Plan (ADAMS No. ML19333B980). The staff also discussed closure of the AMT Action plan and communicate future plans regarding agency efforts on AMTs.
The staff communicated the following takeaways:
Draft guidelines documents have been developed by NRC staff for laser-directed energy deposition and cold spray which were informed by the respective AMT-specific technical letter report and technical assessment. When finalized, these documents provide guidelines to the NRC staff by identifying important considerations when reviewing a submittal requesting the use of these AMTs.
These AMT-specific draft guidelines documents supplement the Draft AMT Review Guidelines document.
Approximately 40 participants attended the meeting with participation from the Nuclear Energy Institute (NEI), Westinghouse, national laboratories, and other external stakeholders. NEI mentioned that voluntary comments will be submitted to the NRC staff.
Members of the public that might have been in attendance did not participate in the allocated discussion times.
Please direct any inquiries to me at 817-200-1152 or via e-mail at Isaac.Anchondo-Lopez@nrc.gov.
Enclosure:
List of Attendees
SUBJECT:
SUMMARY
OF JUNE 28, 2022, COMMENT-GATHERING PUBLIC WEBINAR REGARDING THE DISCUSSION OF ADVANCE MANUFACTURING TECHNOLOGIES DRAFT GUIDELINES DOCUMENTS: DATED JULY 19, 2022 ADAMS Accession Number: ML22200A081
- via email OFFICE DNRL/NVIB DNRL/NVIB DNRL/NVIB NAME IAnchondo-Lopez ABuford IAnchondo-Lopez DATE 07/18/22*
07/18/22*
07/18/22*
LIST OF ATTENDEES JUNE 28, 2022, PUBLIC WEBINAR PUBLIC WEBINAR ON DISCUSSION OF ADVANCE MANUFACTURING TECHNOLOGIES DRAFT GUIDELINES DOCUMENTS Name Organization Marc Albert EPRI Allen Williams Jana Bergman Curtiss Wright Meg Audrain NRC Angie Buford NRC David Andersson LANL David Hinds GE Robert Davis NRC Darrell Dunn NRC Carolyn Fairbanks NRC Brian Few GE Carl Lee Friant Constellation Nuclear Daniel Galicki BWXT Allen Hiser NRC Matthew Hiser NRC Amy Hull NRC John Pfabe Westinghouse Kyle Johnson Constellation Nuclear Hilary Lane NEI Bruce Lin NRC Louise Lund NRC Shah Malik NRC John McKirgan NRC Shawn Moylan NIST Eric Palmer NRC Cory Parker NRC Kenneth Ross PNNL Steve Ruffin NRC Adam Smith ORNL Benjamin Sutton Ted Coulter Robert Tregoning NRC John Tsao NRC Christopher Tyree NRC Isabella Van Rooyen PNNL Paul Witherell NIST On Yee NRC
Mark Yoo NRC Brian Smith NRC