ML21273A154
| ML21273A154 | |
| Person / Time | |
|---|---|
| Site: | 07109036 |
| Issue date: | 10/01/2021 |
| From: | John Mckirgan Storage and Transportation Licensing Branch |
| To: | Source Production & Equipment Co |
| Bernie White NMSS/DFM/STL 301-415-6577 | |
| Shared Package | |
| ML21273A124 | List: |
| References | |
| CoC No. 9036, EPID L-2021-RNW-0010 | |
| Download: ML21273A154 (3) | |
Text
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE
FOR RADIOACTIVE MATERIAL PACKAGES
- 1. a. CERTIFICATE NUMBER b. REVISION NUMBER c. DOCKET NUMBER d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 90 3 6 14 71 - 90 3 6 USA/90 3 6/B(U) - 96 1 OF 3
- 2. PREAMBLE
- a. This certificate is issued to certify that the package (packaging and contents) described in Item 5 below meets the applicable safety standards set forth in Title 10, Code of Federal Regulations, Part 71, Packaging and Transportation of Radioactive Material.
- b. This certificate does not relieve the consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies, including the government of any country through or into which the package will be transported.
- 3. THIS CERTIFICATE IS ISSUED ON THE BASIS OF A SAFETY ANALYSIS REPORT OF THE PACKAGE DESIGN OR APPLICATION
- a. ISSUED TO (Name and Address) b. TITLE AND IDENTIFICATION OF REPORT OR APPLICATION Source Production and Source Production and Equipment Company, Inc.
Equipment Company, Inc. application dated February 28, 2001, as supplemented.
113 Teal Street St. Rose, LA 70087-9691
- 4. CONDITIONS This certificate is conditional upon fulfilling the requirements of 10 CFR Part 71, as applicable, and the conditions specified below.
5.
(a) Packaging
(1) Model No.: C - 1
(2) Description
The packaging consists of a steel inner unit inside an outer overpack. The inner unit is a rectangular box approximately 9 high x 7.5 wide x 7.5 deep around a depleted uranium shield. All fittings and source locking components are protected and enclosed within the 1/8 carbon steel outer shell. The inner receptacle consists of a uranium shield equipped with two closed bottom Zircalloy or titanium J tubes, each of which may house one pigtail type special form source. The overpack is a 12-gallon, 20 - or 22-gage steel drum partiall y filled with foam. The weight of the inner unit is 51 to 70 lbs. The weight of the overpack is 19 to 22 lbs. Up to 8 lbs. of ancillary equipment may be included within the overpack. The maximum gross weight of the package is 100 lbs.
(3) Drawings
The packaging is constructed in accordance with Source Production and Equipment Company, Inc., Drawing Nos. B322000, Rev. (3); B311000, Rev. (2); B311001, Rev. (1); and B311002, Rev. (0).
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE
FOR RADIOACTIVE MATERIAL PACKAGES
- 1. a. CERTIFICATE NUMBER b. REVISION NUMBER c. DOCKET NUMBER d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 90 3 6 14 71 - 90 3 6 USA/90 3 6/B(U) - 96 2 OF 3
5.(b) Contents
(1) Type and form of material
Iridium-192, Selenium-75, and Ytterbium-169 as sealed sources that meet the requirements of special form radioactive material.
(2) Maximum quantity of material per package
Two sealed sources with a combined activity not to exceed 300 curies (11. 1 TBq) (output)
Output curies are determined by measuring the source output at 1 meter and expressing its activity in curies derived from the following: 0.48 R/(h-Ci) Iridium-192.
- 6. Tungsten shield pads, with dimensions up to approximately 2-inches diameter and 1/2-inch thick, may be welded to the inside surface of the source changer housing.
- 7. The nameplate shall be fabricated of materials capable of resisting the fire test of 10 CFR Part 71 and maintaining their legibility.
- 8. In addition to the requirements of Subpart G of 10 CFR Part 71:
(a) The package shall be prepared for shipment and operated in accordance with the Operating Procedures of Section 7.0 of the application, as supplemented; and
(b) The package shall meet the Acceptance Tests and be maintained in accordance with the Maintenance Program of Section 8.0 of the application, as supplemented.
- 9. The packaging authorized by this certificate is hereby approved for use under the general license provisions of 10 CFR 71.17.
- 10. Revision No. 1 3 of this certificate may be used until October 31, 202 1.
- 11. Expiration date: October 31, 2026.
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE
FOR RADIOACTIVE MATERIAL PACKAGES
- 1. a. CERTIFICATE NUMBER b. REVISION NUMBER c. DOCKET NUMBER d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 90 3 6 14 71 - 90 3 6 USA/90 3 6/B(U) - 96 3 OF 3
REFERENCES
Source Production and Equipment Company, Inc., applications dated September 27, 2000, and February 28, 2001.
Supplements dated: April 11, and May 11, 2001; May 1, June 14, and June 23, 2006; May 26, 2011; May 31, 2016; and September 28, 2021.
FOR THE U.S. NUCLEAR REGULATORY COMMISSION
John McKirgan, Chief Storage and Transportation Licensing Branch Division of Fuel Management Office of Nuclear Material Safety and Safeguards
Date: October 1, 2021