ML20216B231
| ML20216B231 | |
| Person / Time | |
|---|---|
| Site: | 07100102 |
| Issue date: | 03/10/1998 |
| From: | Dicharry R SOURCE PRODUCTION & EQUIPMENT CO., INC. |
| To: | Matula T NRC |
| References | |
| NUDOCS 9803130012 | |
| Download: ML20216B231 (1) | |
Text
>
Docket No. 71-0102 Frotn:
RDDicharry <RDDicharry@ Prodigy. Net >
Source Production and Equipment Co., Inc.
To:
WND1.WNP7(WRW1, TOM 1) Tgooq,qs gg79 gjg Date:
3/10/98 2:32pm
Subject:
[ Fwd: Definition of "Used" Type "B" package.]
RDDicharry wrote:
j
Dear Tom:
> Please clarify the definition of a "used" Type B package.
i i
> Here is the situation. Until we obtain NRC authority to resume full Type i
> B pack fabrication rate we may occasionally be unable to meet customer
)
- > demand for new packages. However, the CAL does not prohibit us from
> repairing and distributing "used" packages. Therefore, we propose to
> purchase used devices from our customers and refurbish thern to be "like
> new" even though they are technically used packages. Customers who have
> packages that are not currently needed would be eager to sell their extra
> devices, or trade them for a truly new device once we resume full
> production. The problem is that we are not clear on the definition of a
> "used package."
J
> The major components of a package are (1) shield, (2) structural system,
{
> (3) lock system, and (4) housing. Are we allowed to disassemble one
> complete truly used device into the above four components and refurbish
}0
> each component into a "like new" used device? If the NRC rules that we
> are limited to refurbishing packages on a one-for-one basis, which of the A
R
> above components must remain included in the refurbished "used" package.
> If an clarification is not readily available from the NRC 1 request
> authorization to proceed with the refurbishment of used packages based on
> our good faith effort to interpret the terms of the fabrication
//((/y
> suspension.
> Thank you for your assistance.
> Sincerely,
> R. D. "Donny" Dicharry, President
(
> Source Production and Equipment Co., Inc
> St. Rose, Louisiana 3/10/98 Tom:
I originally sent this on 3/2/98, but I had the wrong e-mail address.
Donny 9803130012 900310 l lffhfhfllllffll PDR ADOCK 07100102' C
PDR 1.vVv0 l