ML20207E734
| ML20207E734 | |
| Person / Time | |
|---|---|
| Site: | Peach Bottom  |
| Issue date: | 12/30/1986 |
| From: | Clark R Office of Nuclear Reactor Regulation |
| To: | Bauer E PECO ENERGY CO., (FORMERLY PHILADELPHIA ELECTRIC |
| References | |
| TAC-61973, TAC-61974, NUDOCS 8701020283 | |
| Download: ML20207E734 (3) | |
Text
-
DEC 3 0 1986 Docket Hos.: 50-277 and 50-278 Mr. Edward G. Bauer, Jr.
Vice President and General Counsel Philadelphia Electric Company 2301 Market Street Philadelphia, Pennsylvania 19101
Dear Mr. Bauer:
SUBJECT:
REQUEST FOR ADDITIONAL INFORMATION (RAI) CONCERNING A TECHNICAL SPECIFICATION AMENDMENT REQUEST DATED JULY 14, 1986 Re:
Peach Bottom Atomic Power Station, Units 2 and 3 (TAC Nos.
61973 and 61974)
The NRC staff is currently reviewing your Technical Specification amendment request dated July 14, 1986.
In order for us to complete our review of your submittal, we require formal responses to the enclosed request for additional information. Some of this information was informally provided to us on October 29, 1986. This letter also documents that you provided us design drawings on the six spent fuel pool heat exhangers (6280-M12B series drawings), the process diagrams on the service water system (M-342 series), and specifications on the heat exchangers.
If you have any questions concerning this request, please contact me at (301)492-8298.
The information contained in this letter affects fewer than ten respondents; therefore, OMB clearance is not required under P.L.96-511.
Sincerely,
$!IWERIalpedby
~
8701020283 861230 Richard J. Clark, Project Manager PDR ADOCK 05000277 BWR Project Directorate #2 P
Enclosure:
As stated DISTRIBUTION cc w/ enclosure:
E Docket File /
RClark EJordan See next page NRC PDR Local PDR JPartlow NThompson Branch Files RBernero 0GC-Bethesda ACRS(10)
SNorris BGrimes 0FFICIAL RECORD COPY DBL PD#2 DBL:PD#
c DBL:Pp2 SN is RClark:e DMuJred 12/
86 12/30/86 12/,Q/86
Mr. E. G. Bauer, Jr.
Peach Bottom Atomic Power Station, Philadelphia Electric Company Units 2 and 3 cc:
Mr. Eugene J. Bradley Mr. R. A. Heiss, Coordinator Assistant General Counsel Pennsylvania State Clearinghouse Philadelphia Electric Company Governor's Office of State Planning 2301 Market Street and Development Philadelphia, Pennsylvania 19101 Post Office Box 1323 Harrisburg, Pennsylvania 17120 Troy B. Conner, Jr., Esquire 1747 Pennsylvania Avenue, N.W.
Mr. Thomas M. Gerusky, Director Washington, D.C.
20006 Bureau of Radiation Protection Pennsylvania Department of Thomas A. Deming, Esquire Environmental Resources Assistant Attorney General Post Office Box 2063 Department of Natural Resources Harrisburg, Pennsylvania 17120 Annapolis, Maryland 21401 Mr. Albert R. Steel, Chairman Mr. R. Fleishmann, II, Manager Board of Supervisors Peach Bottom Atomic Power Station Peach Bottom Township R. D. #1 R. D. #1 Delta, Pennsylvania 17314 Delta, Pennsylvania 17314 Mr. G. M. Leitch, Superintendent Nuclear Generation Division 67-1 Philadelphia Electric Company 2301 Market Street Philadelphia, Pennsylvania 19101 Mr. Anthony J. Pietrofitta, General Manager Power Production Engineering Atlantic Electric Post Office Box 1500 1199 Black Horse Pike Pleasantville, New Jersey 08232 Resident Inspector U.S. Nuclear Regulatory Commission Peach Bottom Atomic Power Station Post Office Box 399 Delta, Pennsylvania 17314 Regional Administrator, Region I U.S. Nuclear Regulatcry Commission 631 Park Avenue King of Prussia, Pennsylvania 19406 i
's REQUEST FOR ADDITIONAL INFORMATION CONCERNING 07/14/86 AMENDMENT REQUEST Provide the analysis of the Peach Bottom fuel storage pool temperature profile to demonstrate that the pool either meets the guidance provided in Standard Review Plan 9.1.3 or provides an equivalent level of safety. Your analysis should be provided in sufficient detail so that the staff can independently.
verify the adeqtacy of the calculations and conclusions. Specificially, provide the following information:
1.
Provide the following information for each spent fuel pool cooling system heat exchanger:
a.
Tube surface area (square feet) b.
Overall conductance (BTU /sq-ft-Hr-F) c.
Design flow rates for:
(1) Spent fuel pool water (Lbs/ hour)
(ii) Service water (Lbs/ hour) 2.
Provide a discussion of any recently collected data which could be used to determine if significant internal scaling or discrepancies in heat exchanger capability (compared with design values) are evident.
3.
Specify the minimum time required between power generation (last control rod fully inserted) and placing the separator into the dryer and separator storage pool (core exposed).
i l
l i
i L