ML20199H844

Forwards Requested Info from Sealed Source Safety Section Re How to Load Radxref System

ML20199H844
Person / Time
Issue date:	11/26/1997
From:	Randall K NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS)
To:	Scroggs A WASHINGTON, STATE OF
References
SSD, NUDOCS 9711260238
Download: ML20199H844 (3)

Text

_

y November 26,1997 Mr. Arden Scroggs Division of Radiation Protectio.)

~

Department of Health P.O. Box 47827 Olympa, WA 98504 7827

Dear Mr. Scroggs:

Enclosed is the information that you requested 1.om the Sealed Source Safety Section if you have any questions or need additionalinformation, please contact me at (301) 415-8140 or Steven Baggett at (301) 415 7273.

Sincetely,

/&/

KimBerly Randall, Sealed Source Device Assistant Sealed Source Safety Section Medical, Academic, & Commercial Use Safety Branch Division of Industrial and Medical Nuclear Safety, NMSS i

Enclosure:

RADXREF -

i l

Distribution; SBaggett M N e 0 3 4 t o dti IMAB r/f DOCUMENT NAME P;\\ BAKER I

OFC:

IM6B -

NAME: -

Mall:

DATE:

11/4497

kkkkN, y

lierto Load the RADXREF System These procedures assume that you are familiar enough with Windows to be able to change from one window to another, and to find icons within the windows. If you are having difficulty, you should ask your computer support personnel, or ask someone in the office who is familiar with computers, for assistance. If at any time as you are following the directions below, ths screen does not look like what is described, you should ask your computer support personnel, or ask someone in the office who is familiar tith computers, for assistance.

1; Put the disk in the drive. Note whether it is the A: or 8: drive. If you are not sure, then ask your computer support personnel, or ask someone in the office who is familiar with comouters.

2.

On your computer, go to the MS DOS prompt.

If you are using Windows, then find the icon that says MS DOS and double-click. It is usually in the

• Main" window.

3.

On the screen should now be a flashing box or line (the cursor) It should be next to something that looks like *C:V. If it does not look like that then type, C:

(then press the Enter or Return key)

Then type, CDt (then press the Enter or Return key)

It should now look correct.

4.

Create e directory for the System.

Type, MDtXREF (then press the Enter or Return key)

5. -

Go to the SSDS directory.

Type, CDtXREF (then press the Enter or Return key) 6.

Copy the file from the disk to the XREF directory,

Type, COPY A:t*.* C:tXREft*.*

(then press the Enter or Return key) 7, install the System by typing, RAD (then press the Enter or Return key) 8.

The RADXREF system is now installect on your comouter, 9.

To run the RADXREF system, type, XREF (then press the Enter or Return key) s

l o

t I

How to Undate the RADXREF System.

[

. Follow the steps listed above, except do ngj do Step 4 (creating the directory).

r To Make more room on your hard drive i

You can delete the following files:

MANUAL MANUAL.51 RAD.EXE t

h r

+

t b

N 4

4 e

l_

. u

.