ML20199C116
| ML20199C116 | |
| Person / Time | |
|---|---|
| Issue date: | 10/18/1985 |
| From: | Wiedeman D NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION III) |
| To: | BOISE CASCADE CORP. |
| Shared Package | |
| ML20199C119 | List: |
| References | |
| SSD, NUDOCS 9901140206 | |
| Download: ML20199C116 (4) | |
Text
.
J.
Ac2 r
DCT 1 B Boise C'ascade Corporation 2nd Street and 3rd Avenue l
International Falls, MN 56649 Gentlemen:
As' a result of the inspection' conducted on July 11-31, 1985, a Form NRC-591, SAFETY INSPECTION, is issued for your NRC general license.
You will note
-that this form indicates that no item of noncompliance was found.
It is nct i
'i d 2
necessary that you acknowledge receipt of this form.
L The enclosed copy of our inspection report identifies areas examined during the inspection. Within these areas, the inspection consisted of a selective Lexamination of procedures and representative records, observations, and
. telephone interviews with your personnel.
'If you have any questions or require clarification on any of the information stated above, you may contact us at (312) 790-5616.
Thank you for your cooperation.
Sincer ly, s '/
j c
c
,6#
D. G. Wiedeman, Chief Nuclear Materials Safety Section 1
Enclosures:
As stated bec w/ enclosures:
-L. Cobb', OIE S. Baggett, NMSS
\\1
\\.
D 130013 Y
RIII T
Wiedeman/mj 10/16/85 9901140206 851018 PDR RC c
SSD PDR
Q i
j b
GENERAL LICENSE GAUGE DATA.;JLLECTION FORM a
1.
Name and Address of General Licensee:
Boise Cascade Corporation 2nd Street and 3rd Avenue l
International Falls, MN 56649 (218) 285-5538-2.
Principal Business of Licensee:
~
Paper Manufacturer 3.
Purpose for which gauge (s) are used (e.g., measurement of level, density, flow, thickness,etc.):
i Paper Basis Weight, (Density) i 4.
Gauge Specifics:
a.
Manufacturer:
Measurex Corporation b.
Model Number:
1201
- c..
Isotope / Activity:
krypton-85/0.3 Curie i
i d.'
Date Received:
November 1978 e.
.Date Replaced:
N/A l
l' 5.
Name of specific. licensee that installed gauge:
i Measurex Corporation 6.
Does the gauge have a durab]e, legible and visible label:
Yes.
7.
Was an Initial Radiation Survey performed at time of installation and do they have a record (list results) NOTE:
records only required for
.two year period:
N/A. Past two years since installation 8.
Leak Tests:
a.
Have the tests een performed (list results):
N/A.
b.
'Name of fira/ person conducting test:
N/A.
t b
i h
r c.
Are records available of tests (list date of last test):
' NOTE:
records only maintained for two-years N/A.
9.'
Operational Test of Gauge:
a.
Have any tests been performed of the on/off mechanism:
Yes;. Warning lights, Shutter mechanism, and radiation saftey interlock OK b.
Name of firm / person who performed test:
j
.Measurex Corporation c.
Are records maintained of tests (list dates):
Yes, May 22,11985; November 28, 1984; July 3, 1984; December 28, 1983; July 6, 1983; and December 18, 1982.
L10.
Has the gauge been moved from it's original location? If so, by whos:
No.
11.
Does the licensee have personnel who are responsible for assuring compliance with the General License Conditions (10 CFR-31, 31.5(c)
'(1 through 10):
Yes, Jay Hart - Radiation Safety Officer.
- 12..Has the licensee made any transfers of gauges:
No.
13.
Name and Address of Gauge Manufacturer:
Measurex Corporation One Results Way Cupertino, CA 95014 j
- 14. Onsite inspection of gauge (s) (list observations / measurements):
-N/A.
15.
Name'of ORAU Reviewer i
j y'./
/w 1 $s CAbt p-n-ff A
Date
\\
.7 2
. i
- p..
4 J.Y c
. 16.
Signature and Date of NRC Reviewer f
/
J c-L
[d "
Date t
1 i-t' t -.
i 6
4 9
a.
t e..
4 f
I I
i 15 i
3 y
w
,