ML20154R295
| ML20154R295 | |
| Person / Time | |
|---|---|
| Site: | 07109192 |
| Issue date: | 03/19/1986 |
| From: | Macdonald C NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS) |
| To: | |
| Shared Package | |
| ML20154R291 | List: |
| References | |
| NUDOCS 8603280301 | |
| Download: ML20154R295 (3) | |
Text
7----------------------------------
___-------fgp-aamaq I' NAC FORM s1s U.S. NUCLEAR RESULATORY COMMISSl8N I
- au CERTIFICATE OF COMPLIANCE r
I secrR "
FOR RADIOACTIVE MATERIALS PACKAGES I
D REVis60N NUM8ER
- c. PACKAGE iOENTIFICAtlON NUMBER q PAGE NUMSER e ToTat NuMeta PAGEs 1 a CERrlFICArt NUMBER y y g
9192 0
USA /9192/A 1
3
't I
l 2 PREAMBLE l
a inis certificate is issued to certify that the packaging and contents described in item 5 Delow. meen the applicaete safety standards set forth m Title 10. Code l
l of Federal Regulations. Part 71,"Packagmg and Transportation of Radioactive Matenal?
[
l This certificate does not reheve the consignor from comphance with any requirement of the regulations of the U S Decartment of Transportation or ott er I
b I
aooi.caecoguatory agencies. meiuding tne government of any country enrouan or into.nien the pac ag..in ne transported.
I I
I I
'l f
f 3 ty,gicgs;ssguoN rw exsis or a sarErv Navsis,REgr,ogrgegagsgoR ic,4 ion i
Ijl ANEFC0, Incorporated ANEFC0 application dated October 3,1985, as l
I 904 Ethan Allen Highway su pplemented.
I
[
ll Ridgefield, CT 06877 l
I II
.I I'
e ooc =Er Nuusta 71-9192 l
a CONoirsONs l
l This certificate is conditional upon fulfi!Img the requirements of 10 CFR Part 71. as applicable, and the conditions specifies below I
li Il l! s i
(a)
Packaging
[
I!
L I
I (1) Model No.:
AP-300 Type A I
I l
(2)
Description:
Il I
l Steel encased, lead shielded shipping cask for low specific activity naterial. !I I
The cask is right circular cylinder 83-5/8 inches in diameter by 96.0 lI I
inches high. The cask cavity is 76.0 inches in diameter by 82 inches high.
I I
The cask side walls consist of 1/2-inch thick inner steel shell, 2.06-inch d
lf l
thick lead shell, and a 1-l/4-inch thick-outer steel shell. The base is similarly constructed of plate raterials. The stepped lid is comprised of
[
g g
a 1/2-inch thick inner steel plate, 2.06-inch thick lead layer, 3/8-inch
'l I
thick steel plate, 3.8-inch thick concrete layer, and 2.0-inch thick outer
,L I,
steel lid plate.
The lid is secured with 36, 3/4-inch diameter hex socket I
ll bolts with washers and a Red Devil gasket.
The lid is provided with a test f
f port to verify the effectiveness of the lid seal following loading of the y
p cask.
The cask is provided with four lif ting / tie-down lugs.
The top of l't ll the cask is provided with a 3-inch diameter toroidal ring impact limiter t
l and the bottom of the cask is equipped with a 2-1/2-inch square tubing i
I inpact limiter.
The gross weight of the package is about 66,720 pounds.
I i
I l
f[
l (3) Drawings l
r l
The package is fabricated in accordance with ANEFCO, Inc. Drawing Nos.:
ir I
133-1, Rev. 8; 134-1, Rev. 7; 134-la, Rev.1; 135-1, Rev. 6; 136-1, Pev. 4; ll I
138-1, Rev. 8; 139-1, Rev.1; 141-1, Rev.1; 142-1, Rev.1; 143-1, 0.ev. 2; jI
,1 144-1, Rev. 1; 145-1, Rev. 1; 146-1, Rev. 1; and 151-1, Rev. 1.
]
i s
L I
b l'
I ltl I
i Jl i
l l
l 8603280301 060319 l
PDR l
t i
l l __-_____-------------------------<---wn--------------
E3fKWE1E*E*A*K'L M maf li g
ll CONDIT10NS Icontinued) p 4
.I f
Page 2 CerQffcate No. 9192 - Revision No. 0 - Docket No. 71-9192 j l 1
3 1
's 1
.I T
(b)~ Contents
'N 3
l j
(1) Type and fom of material
(
- ]
I
)
(i) Dewatered, solids, or solidified waste, meeting the requirement,s g
f for low specific activity raterial, in secondary containers; or i
1 i
I j
(ii) Activated solid components meeting the requirenents for low specific activity naterial, in secondary containers.
(
)
3
- )
(2) Maxinum quantity of naterial per package 3
il I
1 Greater than Type A quantity of radioactive material which nay contain I
.I fissile naterial provided the fissile material does not exceed the I
j limits in 10 CFR 571.53.
The decay heat load is limited to 1 watt.
j
- ]
g 1
6.
(a)
For any package containing water and/or organic substances which could y
=1 radiolytically generate conbustible gases, determination must be made by i
'l tests and measurements or by analysis of a representative package such that I
I-9 the following criteria are net over a period of time that is twice the j
expected shipment time:
l J
(i) The hydrogen generated rust be limited to a nolar quantity that would g
4 be no more than 5% by volume (or equivalent limits for other inflan-l I
9 mable gases) of the secondary contaiger gas void if present at STP j
(i.e., no more than 0.063 g-moles /f t at 14.7 psia and 70*F); or I
h (ii) The secondary container and cask cavity nust be inerted with a diluent f
- 1 to assure that oxygen rust be limited to 5% by volune in those portions y
p of the package which could have hydrogen greater than 5%.
I
=1 I
I j
For any package delivered to a carrier for transport, the secondary container q
must be prepared for shipment in the same manner in which detemination for
[
3 gas generation is made.
Shipment period begins when the package is prepared g
!]
(sealed) and must be completed within twice the expected shipment time.
- t.
if
.I h
(b)
For any package shipped within 10 days of preparation, or within 10 days
,I
-I H
after venting of drums or other secondary containers, the determination in h
(a) above need not be made, and the time restriction in (a) above does not j
p apply.
y p
I q
7.
Maximum gross weight of the contents, secondary containers, and shoring is
'N I
R limited to 20,000 pounds.
/
,\\
h 8.
Except for close fitting contents, shoring rust be placed between secondary j
i containers and the cask cavity to minimize movement during normal conditions of g
h transport.
I d
>I HM
.II sh h
5
- p oH p
b II
---rr.r-vsawwwv. irs -rss#-w-wwv.ir-wwwwwwwww..--
lsumAmm_m a mm = = =m i mm = = = = = =_a m_m m a i====== 4 = = = m a = === = = = =Amh a mn lI!
F l
CoNDITloNS (contenued) y
!Il F
l lI Page 3'- CBrai<ficate No. 9192 - Revision No. 0 - Docket No. 71-9192 F
t!
e k.
i l1.
5 ln!
D.
ig:
p.
- q 9.
The lid lifting eye bolts must not he used for lif ting the cask, and must be g
it' rmoved and the holes covered in transit.
E lW V
I!
- 10. The cask cover must be secured by 36, ASTM A-320, Type L7A, 3/4-10 UNC-3A x l
l 3-1/4 hex socket head bolt with 1-3/8 OD x 13/1610 x 1/2 thick flat steel (L7A) g l
washers torqued to 110 f t-lbs (lubricated).
g E
11.
In addition to the requirements of Subpart G of 10 CFR Part 71:
k V
li (1) Prior to each shipment, the packaging Red Devil lid seal rust be inspected.
The seal must be replaced with a new seal if inspection shows any defects or every 12 months, whichever occurs first.
Red Devil lid test port gaskets i
must be replaced following each use.
k F
(ii) The cask must reet the Acceptance Tests and fiaintenance Program of Section 8.0 f,;
g of the application. The cask botton impact limiter rust be inspected prior to each shipnent in accordance with Section 8.2.1.1 of the application.
F
- 12. The cask body and cask lid rust be marked in accordance with 10 CFR 671.85(c).
g E
E
- 13. The package authorized by this certificate rust be transported on a motor vehicle, railroad car, aircraft, inland watercraf t, or hold or deck of a seagoing f
vessel assigned for the sole use of the licensee.
14.
The package authorized by this certificate is hereby approved for use under the q
general license provisions of 10 CFR %71.12.
4 E
15.
Expiration date: October. 31, 1990.
l 5
I REFERENCES I
W ANEFCO, Inc. application dated October 3,1985.
[
I Supplenent dated:
October 25, 1985.
f FOR THE U.S. NUCLEAR REGULATORY COMMISSION
.hI b
4L 3
/
s Charles E. MacDonald, Chief p
Transportation Certifica tion Branch
- I j,8 Division of Fuel Cycle and fiaterial Safety, NMSS Date:
hl 9 mas g
s, D
d I I
- Id
- re r_r.r_wwmuw___.r,.r_,_ r_.rg r <<.re r_ r_y r-y ww-#_y-w_.gy
,I,
_