ML20147C555
| ML20147C555 | |
| Person / Time | |
|---|---|
| Site: | Arkansas Nuclear  |
| Issue date: | 08/11/1978 |
| From: | NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION IV) |
| To: | |
| Shared Package | |
| ML20147C548 | List: |
| References | |
| 50-313-78-12, NUDOCS 7810130049 | |
| Download: ML20147C555 (2) | |
Text
."
Arkansas Power and Light Company Arkanscs Nuclear One, Unit No.1 Docket No. 50-313 ENCLOSURE 1
' NOTICE OF VICLATION Based on the results of an NRC inspection conducted July 11-14,1978, it appears that certain of your activities were not conducted in full com-pliance with conditions of your Operating License No. DPR-51 as indicated below:
1.
Technical Specification 6.5.2.8.C states that, " Audits of facility activities shall be performed under the cognizance of the SRC.
These audits shall encompass:
"c.
The results of all actions taken to correct deficiencies occurring in facility equipment, structures, systems or method of operation that affect nuclear safety at least once per six months."
Contrary to the above, no audits per Technical Specification 6.5.2.8.C have been conducted since July 28, 1977.
This is an infraction.
1 2.
The facility Technical Specifications, Section 4.19.3, states in part, "The non-supervised circuits between the local panels in Specification 4.19.2 and the control room shall be demonstrated operable at least once per 31 days."
Contrary to the above, the operability of the non-supervised circuits has not been demonstrated since the issuance of Amendment No. 30 (March 3,1978) to the Unit No.1 Facility Operating License.
This is an infraction.
3.
10 CFR 50, Appendix B, Criterion V, requires in part that, " Activities affecting quality shall be prescribed by documented instructions, procedures, or drawings of a type appropriate to the circumstances and shall be accomplished in accordance with these instructions, procedures, or drawings."
't S Ipl3 d#'M 1
- Bechtel Procedure WFMC-1, " Welding Filler Material Control Procedure Specification," paragraph 4.3.4, requires that, " Portable rod
\\
warmers shall be checked out and into the rod room on a daily basis.
During use, portable rod warmers shall be continuously heated.
... Unused electrodes shall be returned to the rod storage area
\\
at the end of each shift or destroyed."
o Contrary to the above requirements, an unplugged (cold) rod warmer L
(Number 145) containing E-7018 weld rod was found on level 314 ft.
level of the reactor building.
This is an infraction.
i 8
l
(
-