ML20137W440

Requests Addl Listed Info in Order to Continue Review of Application for Renewal of License SNM-356.Review Will Continue Upon Receipt of Info

ML20137W440
Person / Time
Site:	07000391
Issue date:	06/26/1985
From:	Glenn J NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION I)
To:	Milwicz R PRINCETON UNIV., PRINCETON, NJ
Shared Package
ML20137W321	List: ML20137W317 ML20137W340 ML20137W377 ML20137W418 ML20137W440 ML20137W475 ML20137W489 ML20137W501
References
03276, 3276, NUDOCS 8512100246
Download: ML20137W440 (2)

Text

- -

G

-p w n JUN 2 61985 License No. SNM-356 Docket.No. 070-00391

. Control No. 03276 Princeton University ATTN: Robert R. Milwicz University Health Physicist Office of Occupational Health and Safety Forrestal Campus Princeton, New Jersey 08544 Gentlemen: .

This is in reference to your request in a letter to renew License No. SNM-356.

In order to continue our review, we need the following additional information:

~

1. Regarding your area radiation and contamination surveys, please describe

~

the criteria which will be used to determine the frequency of surveys required by individual investigators. Also describe the contamination limits in units of dpm /100 cm above 2 which decontamination of the area will be required.

2. Please describe the criteria you use to determine which personnel are required to wear dosimeters and what type of dosimeters are required.

3. -Describe your-procedures for providing instruction as required in 10 CFR 19.12 for laboratory workers, including post-doctoral research staff, and for ancillary personnel such as security and custodial staff. Confirm that all individuals who work in or frequent restricted areas will receive initial'and annual refresher training and describe the method you will use to document and audit training.

4. If you propose to calibrate your own radiation survey and monitoring instruments, you should submit a detailed description of your planned calibration procedures. The description of calibration procedures should

- ' include, as a minimum:

a. The manufacturer and model number of the sources (s) to be used.

b. The nuclide and quantity of radioactive material contained in the source.

c. The accuracy of the source (s). Traceability of the source to a primary standard should be provided.

d. 'The step-by-step procedures, including associated radiation safety procedures. 'These procedures should include a two point calibration of each scale of each instrument with the points' separated by at least 50% of the scale.

OFFICIAL RECORD COPY 920WURTZ5/29/85 - 0001.0.0 C512100246 851023 06/24/85 REli L IC70 SNM-0356 PDR

l'

.. ~.

9 9 4

We will continue our review upon receipt of this information. Please reply in duplicate to my attention at the Region I office and refer to Mail Control No. 03276.

Sincerely, Original Signed Ihr:

John E. Glenn John E. Glenn, Ph.D., Chief Nuclear Materials Safety Section B Division of Radiation Safety and Safeguards i 2AW RI:DRSS RI:DRSS

Wurtz/mlb )' Glen 6/83785- _ 6 /85 0FFICIAL RECORD COPY 920WURTZ5/29/85 - 0002.0.0 06/24/85

.