ML20133G598
| ML20133G598 | |
| Person / Time | |
|---|---|
| Site: | 05200003 |
| Issue date: | 01/10/1997 |
| From: | Joseph Sebrosky NRC (Affiliation Not Assigned) |
| To: | Liparulo N WESTINGHOUSE ELECTRIC COMPANY, DIV OF CBS CORP. |
| References | |
| NUDOCS 9701160095 | |
| Download: ML20133G598 (4) | |
Text
-
4
)
w arc rz -c0 3 q
UNITED STATES i
NUCLEAR REGULATORY COMMISSION k
iE i
WASHINGTON, D.C. 20066 4 001 l
k.....,o#
January 10, 1997 l
1 1
]
Mr. Nicholas J. Liparulo, Manager Nuclear Safety and Regulatory Analysis 1
Nuclear and Advanced Technology Division Westinghouse Electric Corporation i
P.O. Box 355 Pittsburgh, Pennsylvania 15230 i
SUBJECT:
RETURN OF PROPRIETARY MATERIAL TO WESTINGHOUSE DOCKETED UNDER THE AP600 DESIGN REVIEW
Dear Mr. Liparulo:
By Westinghouse letter NTD-NRC-95-4556, dated September 18, 1995, you provided a status report on proprietary material submitted to the Nuclear Regulatory i
Commission (NRC) to support the AP600 design review effort. This report was i
in response to an NRC letter dated August 11, 1995, to you which requested
}
Westinghouse to determine if any of the AP600 submittals were:
(1) no longer considered to be proprietary under 10 CFR 2.790, or; (2) no longer current and applicable to the AP600 design.
i As a result of this review, you identified a number of proprietary submittals i
to be returned to Westinghouse which you no longer considered necessary to support the AP600 design certification effort. The primary reason you cited i
for recalling this proprietary material was that most of the documents and i
submittals have been superseded or revised by a later version. Discussions l
with members of your licensing staff revealed that Westinghouse also believes i
that it is important to retract these documents to minimize the amount of 1
proprietary material on the AP600 docket and reduce the chance that material outside of Westinghouse control could be inadvertently compromised.
You have i
i requested that this material be returned even if the NRC has determined that j
the material is proprietary.
I i
The NRC technical review staff is currently performing an assessment of the documents to be retracted to ensure that they are not relied on to support its safety determination relative to the AP600 review and are wholly superseded by later Westinghouse submittals which can support the staff's safety determina-tion independent of the retracted material. During discussions and a meeting j
with your staff, you were told that documents submitted in support of the AP600 application are subject to the retention requirements of 10 CFR Part 50, Appendix A, Criterion 1, and will be retained for the lifetime of the applica-tion.
By Westinghouse letter NSD-NRC-96-4689, dated April 12, 1996, you provided written confirmation that all AP600 related proprietary documents, 6
which have been identified for retraction, will be permanently retained by hp Westinghouse pursuant to 10 CFR Part 50.
Based on your assurances that the i
retracted documents will be retained at Westinghouse, we are satisfied that arV l
adequate mechanism exists for NRC retrieval and inspection of these documents if required.
\\
I 150122
- a"tB8at318aa8=
NRC HLE CENTER COPY A
Mr. Nicholas J. Liparulo January 10, 1997 As a consequence of this effort, and in accordance with your request, the staff has removed the proprietary documents listed in Enclosure 1 from the AP600 docket file and is returning them to Westinghouse for your disposition or retention as necessary. The original document contained in the docket file is being returned.
NRC staff, contractors, or other parties who received internal NRC distribution have been notified to destroy their copies.
The staff notes that the forwarding letter and the letter requesting that the material be treated as proprietary information associated with the retracted material, along with any non-proprietary version of the submittal which have been placed in the Public Document Room, will remain on the docket.
The staff will continue to evaluate other proprietary documents identified in Westinghouse letter NTD-NRC-95-4556 and return them as appropriate.
Sincerely, original signed by:
Joseph M. Sebrosky, Project Manager Standardization Project Directorate i
Division of Reactor Program Management Office of Nuclear Reactor Regulation 1
Docket No.52-003
Enclosure:
As stated cc w/ partial enclosure:
See next page DISTRIBUTION w/oartial enclosure:
. Docket File PDST R/F TMartin PUBLIC DMatthews TQuay TKenyon WHuffman DJackson JSebrosky JMoore, 0-15 B18 WDean, 0-17 G21 MSiemien, 0-15 B18 ACRS (11)-
EJordan, T-4 D18 DOCUMENT NAME: A: PRE SUB.RTN (8H AP600 DISK)
- See previous concurrence Ta seceive a copy of this docuenent,14Beate la the boa:
"C' = Copy without attachment / enclosure
- E' = Copy with ettachment/ enclosure
- N* = No copy l
0FFICE PM:PDST:DRPM -
OGC D:PDST:DPRM f NAME JSebrosky J/Dd MPSiemien*
TRQuay 6()t?
DATE 01//o /97 V 09/19/96 01//D /97 t/Ge'-
0FFICIAL RECORD COPY
Mr. Nicholas J. Liparulo Docket No.52-003 Westinghouse Electric Corporation AP600 cc w/ partial enclosure:
cc: Mr. B. A. McIntyre Mr. Ronald Simard, Director Advanced Plant Safety & Licensing Advanced Reactor Programs Westinghouse Electric Corporation Nuclear Energy Institute Energy Systems Business' Unit 1776 Eye Street, N.W.
P.O. Box 355 Suite 300 Pittsburgh, PA 15230 Washington, DC 20006-3706 Mr. John C. Butler Ms. Lynn Connor Advanced Plant Safety & Licensing Doc-Search Associates Westinghouse Electric Corporation Post Office Box 34 Energy Systems Business Unit Cabin John, MD 20818 Box 355 Pittsburgh, PA 15230 Mr. James E. Quinn, Projects Manager LMR and SBWR Programs Mr. M. D. Beaumont GE Nuclear Energy Nuclear and Advanced Technology Division 175 Curtner Avenue, M/C 165 Westinghouse Electric Corporation San Jose, CA 95125 One Montrose Metro 11921 Rockville Pike Mr. Robert H. Buchholz Suite 350 GE Nuclear Energy Rockville, MD 20852 175 Curtner Avenue, MC-781 San Jose, CA 95125 Mr. Sterling Franks U.S. Department of Energy Barton Z. Cowan, Esq.
NE-50 Eckert Seamans Cherin & Mellott 19901 Germantown Road 600 Grant Street 42nd Floor Germantown, MD 20874 Pittsburgh, PA 15219 Mr. S. M. Modro Mr. Ed Rodwell, Manager Nuclear Systems Analysis Technologies PWR Design Certification Lockheed Idaho Technologies Company Electric Power Research Institute Post Office Box 1625 3412 Hillview Avenue Idaho Falls, ID 83415 Palo Alto, CA 94303 Mr. Frank A. Ross Mr. Charles Thompson, Nuclear Engineer U.S. Department of Energy, NE-42 AP600 Certification Office of LWR Safety and Technology NE-50 19901 Germantown Road 19901 Germantown Road Germantown, MD 20874 Germantown, MD 20874 1
l J
l 1
AP600 Proprietary Submittals being returned to Westinghouse DATE OF WESTINGH0USE COMMENTS
}
SU8MITTAL 8/9/91, NS-NRC-91-3610 Response to 6/13/91 request for additional information 8/20/91,ET-NRC-91-3614 Response to 5/31/91 request for additional information j
9/10/91, ET-NRC-91-3619 Response to 5/7/91 request for additional information 10/09/91, ET-NRC-91-3626 WCAP-12939-R1
{
10/16/91, ET-NRC-91-3625 WCAP-13053 l
11/4/91, ET-NRC-91-3635 Response to 11/1/91 RAI 12/12/91, ET-NRC-91-3644 Response to 5/31/91 request for additional information i
12/16/91, ET-NRC-91-3650 Response td 11/14/91 request for additional informa?. ion 01/22/92, ET-NRC-91-3656 Response to 1/15/92 RAI 02/24/92, ET-NRC-92-3664 Presentation material from 2/25/92 meeting on AP600 02/24/92,ET-NRC-92-3665 Response to RAI related to AP600 Containment analysis 03/04/92, ET-NRC-92-3672 Presentation material from 3/3/92 meeting on valves 03/12/92, ET-NRC-92-3657 Presentation material from 1/22 meeting on SSAR 03/20/92,ET-NRC-92-3679 Presentation material from containment and severe accident meeting 04/03/92, ET-NRC-92-3683 WCAP-13241 NRC/ WESTINGHOUSE systems meeting 3/5-6/92 04/29/92, ET-NRC-92-3691 Containment volume and heat sink information 06/02/92, ET-NRC-92-3700 Presentation material form the 6/4/92 AP600 technical briefing 06/03/92,ET-NRC-92-3704 Presentation material from the 6/5/92 presentation on nonsafety-related systems 06/11/92, ET-NRC-92-3698 Staff review plans for the AP600 test program 06/30/92, ET-NRC-92-3689 AP600 Equipment required after 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br />
-