ML20128D449

From kanterella
Jump to navigation Jump to search
QA Program for Radiography Insp,Inc.Fee Paid
ML20128D449
Person / Time
Site: 07100534
Issue date: 06/18/1985
From: Mcbride O
RADIOGRAPHY INSPECTION, INC.
To:
Shared Package
ML20128D454 List:
References
NUDOCS 8507050115
Download: ML20128D449 (9)
v • d • e


Text

..

/

7ygg

%W u

7[ D 4

=^oiocairuv

,rp6nt M o7......... -..

>,ss,scnos enca no..

N! ) #

D h$

.1 3f d

DOCKETED

/

f.cscinj Sf.

6 l

.s

'f USTCC g

j

'1 -

Juti1 M985 >

NRC License # 15-21451-01 m :s

'S 63o 20777._-

3 QNfch W

QUALITY ASSURANCE 9ROG k

i r>. Ug n> NI:37 Wil tC s

1.

ORGANIZATION C

The final responsibility for the QA Program for Part 71 requirements re'dtslwith Radigraphy Inspection, Inc.

The Radiation Design and fabrication shall not be conducted under this QA Program.

Safety Officer is designated the resposible individual for the part 71 quality assurance requirements.

The Radiation Safety Officer is resposible for overall administration of the program, training and certification, document control and auditing.

The Radiographers are responsible for handling, storing, shipping, inspection, test and operating status and record keeping.

2.

QUALITY ASSURANCE PROGRAM The management of Radiography Inspection, Inc., establishes and implements this for all QA functions is required according Training, prior to engagement, QA Program.

to written procedures. QA Program revisions will be made according to written procedures with management approval. The QA Program will ensure that all defined QA Procedures, engineering procedures and specific provisions of the package design The QA Program will emphasize control of the charateristics approval are satisfied.

of the package which are critical to safety.

The Radiation Safety Officer shall assure that all radioactive material shipping packages are designed and manufactured under a QA program approved by R clear Regulatory Commission for all packages designed or fabricated after Jrnuary 1, 1979.

This requirement can be satisfied by receiving a certification to this e.ffect from the manufacturer.

3.

DOCUMENT CONTROL All documents related to a specific shipping package will be controlled through All documents changes will be performed according to the use of written procedures.

written procedures approved by management.

The Radiation Safety Officer shall ensure that all QA functions are conducted in accordance with the latest applicable changes to these documents.

8507050115 850613

((

DR ADOCK 0710 4

P. O. Box 1850

  • 1.iberal, KS 67901 * (316) 624-0201
  • Denver, CO (303) 388-8575
  • Odessa, TX (915) 333-9350

~-

k RADIOGRANY TED Page 2 - Quality Accurance Program

4.. HANDLING, STORAGE AND SHIPPING

- Written safety procedures concerning the handling, storage and shipping of packages for cetain special form radioactive material will be followed. Shipments will nor be made unless all tests, certifications, acceptances and final inspections have been completed. Work instructions will be provided for handling, storage and shipping operations.

Radiography personnel shall perform the critical handling, storage and shipping operations.

5.

INSPECTION, TEST AND OPERATING STATUS Inspection, test and operating status of packages for certain special form radioactive material will be indicated and controlled by written procedures.

Status will be indicated by tag, label, marking or log entry.

Status of nonconforming parts or packages will be positively maintained by written procedures. The Radiation Safety Officer shall ensure that these functions are performed.

- 6.

QUALITY ASSURANCE RECORDS Records of packafe approvals (including references and drawings), procurement, inspections, tests, operating logs, audit results, personnel reaining and qualifications and records of shipments will be amintained. Descriptions fo equipment and written procedures will also be maintained.

a) The records will be maintained in accordance with a written procedure.

b) The reords will be identified and retrievable.

c) The Radiation Safety Officer will maintain a list of the records _and their storage location.

7.

AUDITS Established schedule of audits of the QA Program will be performed using written check i

lists. Results fo audits will be maintained. Audit reports will be evaluated and deficient areas corrected.

The audits will be dependent of the safety significance of'the activity being audited, but each activity will be audited at least once a year.

Audit reports will be maintained as part of the quality assurance records.. Members j-of the audit team shall have no responsibility being audited.

d

~

g Orville'McBride Radiography Inspection Inc.

President and Owner 4

P. O. Box 1630

  • Liberal, KS 67901 * (316) 624-0201
  • Denver, CO (303) 388-8575
  • Odessa, TX (915) 333-9350

.i

-+-...m,.

-m.,

7-

.w..

,,%,-.,.c,--.-,+c-.r,-,c

,,,w..cyn

1

~

7/-

DOCKET NO.

SS3f 9 1

CONTROL NO.

//dMdk DATE OF DOC. [6hd[

DATE RCVD.

FCUF PDR FCAF LPDR 101 I&E REF.

f IOIUR SAFEGUARDS FCTC OTHER DESCRIFFION:

AO

}

DGdHad w p

.P& ae a

i i

7

W 400 smnm sueet. s.w.

U.S. Department Washa. ton. D.C. 20590 OfIron$pOfiction Research and Speclo! Progroms Administration IAEA CERTIFICATE OF COMPETENT AUTHORITY Type B Radioactive Material Package Design Certificate Number USA /9056/B( )

(Revision 2)

This establishes that the packaging design described herein, when loaded with the authorized radioactive contents, has been certified by the National Competent Authority of the United States as meeting the' regula-prescribed in IAEA{or Type B packaging for radioactive materials asRegulations and i tory requirements 2

and 173'.394(b)(3) of the USA Regulations 'for the transport of ~ radioactive materials.

I.

Package Identification - Source Production and Equipment Company, Inc. -

Model Specification 2-T.

II.

Packaging Description - Packaging authorized by this certificate is a j

steel-encased, uranium-shielded gamma ray projector having components conr,isting of an outer steel shell, internal bracing, depleted uranium shield, and.a Zircalloy "S" tube.

Contents are positioned in the "S" tube by a source cable locking device and shipping plug. Package is rectangular,12.5" long by 4.4" high and 4.4" vide with gross weight of 40 pounds.

III.

Authorized Radioactive Contents - The authorized contents consist of not more than 200 Curies of Iridium-192 in the form of sealed sources which must meet the definition of special form radioactive material.

IV.

General Conditions -

(a) Each user of this certificate must have in his possession a copy of this certificate.

(b) Each user of this certificate, other than Source Production and Equipment Company Inc., Kenner, Louisiana, shall register his identity in writing to the Of fice of Hazardous Materials Regulation, Materials Transportation Bureau, U.S. Department of Transportation, Washington, D.C.

20590.

(c) This certificate does not relieve any consignor or carrier I

from compliance with any requirement of the Government of any country through or into which the package is to be transported.

k-I. " ' ' ' ' _ _., _ _ _.... _

.)

Certificate Number USA /9056/B( ), Revision 2 Page 2 V.

Marking and Iabeling

'Ihe package nust bear the marking USA /9056/B( )

as well as the other marking and labls prescribed by the USA Regulations.

VI.

Expiration Date

'1his certificate, unless renewed, expires on March 31,1986.

This certificate is issued in accordance with the requirements of the IAEA and USA Regulations and in response to the April 22, 1981 petition by Source Production and Equipnent Ccxnpany, Inc., Kenner, Icuisiana, and in consideration of the associated information provided in the U.S. Nuclear. Regulatory Ccumission Certificate of Caupliance Ib. 9056, (Appendix A).

Certified by:

ll QM h f R. R. Rawl

(/ DATE Chief, Radioactive Materials Branch Office of Hazardous Materials Regulation Mater.ials Transprtation Bureau 1/ " Safety Series No. 6, Regulations for the Safe Transport of Radioactive Eterials,1967 Edition" published by the International Atanic Energy Agency (IAEA), Vienna, Austria.

2_/ Title 49, Oode of Federal Regulations, Parts 100-199, USA.

1 Revision 2 issued to incorporate Revision 1 of USNBC Certificate of Canpliance No. 9056 and to extend expiration date.

l

--r, y-.

,-my

I 400 sevenin sireet. s w.

. Department washogton O C.

20590 dTrptm Researchand IAEA CERTIFICATE OF CINPETENT AU1BORITY SpecW Pmgrams AdmWstronon Type B Radioactive Materials Package Design Certificate Number USA /6717/B(U)T (Revision 0)

This establishes that the packaging design described herein, when loaded with the authorized rarlimetive contents, has been certified by the National Conpetent Authority of the United States, as meeting the regula-tory requir m ents for Type B packaging for radioactive materials as pre-scribed in IAFA 1/ Regulations and SS 49 CFR 173.393a and 173.394(b)(3) of the USA 2/ Regulations for the transport of radioactive materials.

I.

Package Identification - Model No. 6717-B.

Packaging Description - Packaging authorized by this certificate consists II.

of an outer 10-gallcn steel drum with an inner container which is 'a metal-walled container meeting the requirments of rJr Specification 7A, surrounded by polyurethane filler and a 1-1/2" asbestos liner. Gross weight is approximately 75 pounds.

III. Authorized Radioactive Contents - The authorized contents consist of radioactive materials, n.o.s,. as not nore than 200 curies of iridium-192 as sealed sources which nust meet the requirements for special form as set forth in 49 CFR 173.389(g).

Contents must be of a design which has been tested and dmanstrated to be leaktight to a sensitivity of 10 5 atm-cc/sec or less.

IV.

General Conditions -

Each user of this certificate nust have in his possession a copy of l

a.

this certificate.

b.

Each user of this certificate, other than Ganma Industries, Baton Rouge, Louisiana, shall register his identity in writing to the Office of Hazardous Materials Regulation, U.S. Department of Transportation, Washington, D.C.

20590.

'Ihis certificate does not relieve any consignor or carrier frcm c.ccepliance with any requirment of the Goverrment of any country through or into which the package is to be transported.

V.

Marking and Labeling - The package nust bear the marking USA /6717/B(U) as well as the other marking and lables prescrh1 by the USA Regulations.

k

(

__t

Artificate Number USA /6717/B(U)T (Rev. 0)

Page 2 s

VI.

Expiraticn Date

'Ihis certificate, imlana renewed, expires on July 31, 1985.

'Ihis certificate is issued in accordance with the requirments of the IAEA and USA Regulations and in response to the June 1,1981, petition by Ganma Industries, Baton MKje, Iouisiana and in consideration of the associated information provided in U.S. Nuclear Regulatory Comission Certificate No.

6717 (Appendix A) and wlated correspondence.

Certified by:

3000vn0 fiAmmi2MZ R. R. RAWL (DA )

Chief, Radioactive Materials Branch Office of Hazardous Materials Regulation Materials Transportation Bureau 1/ " Safety Series No. 6, Regulations for the Safe Transportation of Fxlimdve Materials," 1973 Revised Edition published by the International Atomic Energy Agency (IAEA), Vienna, Austria.

2/ Title 49, Code of Federal Regulations, Parts 100-199, USA.

g:

--r-e4----------A------------A-----,

NRC FOd51818 U.S. NUCLEAR cE2ULATORY COMMIS$10N

~

ius CERTIFICATE OF CCMPLIANCE E

10 CF2 T1 FIR RADIOACTIVE MATERIALS PACKA2ES I

1. a. CERTIFICATE NUM8ER
b. REVISION NUM8ER

' c. PACKAGE IDENTIFICATION NUMBER d.PAGE NUMBER

e. TOTAL NUM8ER PAGES 6717 5

USA /6717/8(U) 1 2

h
2. PREAMCLE
a. This certificate is issued to certify that the packaging and contents desenbod an item 5 below, rneets the applicable safety standards set forth in e itle 10, Code jk cf Federal Regulations Part 71 -Packaging of Radioactive Matenals for Transport and Transportation of Radioactive Material Under Certain Conditions."
b. This certificate does not relieve the consignor from compliance wrth any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies. including the government of any Country through or into which the package will be transported, k

E

't

. !E 3 TH13 CERTIFICATE IS ISSUED ON THE 8 ASIS OF A SAFETY ANALYS13 REPORT OF THE PACKAGE DESIGN OR APPLICATION d

a PREPAREO BY rName and Addresst

b. TITLE AND IDENTIFICATION OF REPORT OR APPLICATION.

Gamma Industries Nuclear Packaging, Inc. application dated j

i P.O. Box 2543 June 20, 1975, as suppleme.nted y

Baton Rouge, LA 70821 1

71-6717

e. oOCxET NuusER
4. CONDITIONS This certificate is conditional upon fulfilling the requirements of 10 CFR Part 71, as applicable. and the conditions specified below g

(a)

Packaging f

5-5 i

(1) Model No.:

6717-B t

(2) Description

l

' l j

Radiographic device within a protective overpack. The overpack consists l

of an outer container which is a 10-gallon open head steel drum having g

a minimum 20-gauge body and cover, welded seams and a clamp-ring type g

head closure. The void space between the inner and outer container is E

3

.M filled with 1-1/2" thick molded asbestos free liner on sides, top and W

l3 bottom, plus molded polyurethane filler to position and secure the

(

'l radiographic device within the drum. Maximum gross weight of the g

g package not to exceed 75 pounds.

l

!s N

l3 (3) Drawing i

1 E

i The packaging is constructed in accordance with Nuclear Packaging Inc.

l l

Drawing No. SK-D-1, Rev. 2.

y M

l 1

m i 1 i

s E

E 1

l3 E

1 l1 E

i i

J l

t l l N

l l

1 i

l l l

I l l b

23vjocv Ci y

n l

l u

, _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ;- _ =mmrein mne I

k

~ ' ', * ' ' ' ' ' ' '

conomons tcontinvec) ji Page 2 - Certificate No. 6717 - Revision No. 5 - Docket No. 71-6717 y

I5.

ll l

(b) Contents E

(1) Type and form of material Iridium 192 as sealed sources which meet the requirements of special f-fann radioactive naterial.

j

?i X

(2) Maximum quantity of material per package y

200 curies.

6.

The contents must be secured in a single snug-fitting inner radiographic device which has a metal outer wall and meets the requirements of 00T Specification 7A f

packaging.

i i 7.

The source shall be secured in the shielded position of the radiographic device f

by the shipping plug, source assembly, and locking device. The shipping plug l

and source assembly used must be fabricated of materials capable of resisting a i

1475'F fire environment for one-half hour and maintaining their positioning 5l function. The ball stop of the source assembly must engage the locking device.

The flexible cable of the source assembly and shipping plug must be of sufficient l

length and diameter to provide positive positioning of the source in the shielded position.

yl

)

8.

The packaging authorized by this certificate is hereby approved for use under g

the general license provisions of 10 CFRf 71.12.

l f

l 9.

Expiration date: Jul.y 31,~1985.,

.7 n

il t

I 1

REFERENCES 1

X N

l Nuclear Packaging, Inc. application dated June 20, 1975.

l f

l Supplements dated: August 8, 1975;'hnd February 26, 1980.

I i

Ii FOR THE U.S. NUCLEAR REGULATORY COMMISSION i

I I

E i

Charles E. MacDonald, Chief I

l I

Transporation Certification Branch l

I I

Division of Fuel Cycle and I

Material Safety, NMSS j

Date:

SEP 0 61983 l

l l

l l

l l

l l

l

___________________m_________________________________.:

Ni CERTIFICATE CF CEMPLIANCE a cra "

FOR RADIOACTIVE MATERIALS PACKAGES l

t, cent,. care uuuan

..aevision uuuan eacuanosureicatiou nuuna ernoenuuan

.. rom avueen races j 9056 2

USA /9056/B( )

1 2

I I

2. PREAueLe I
a. This certificate is issued to certify that the packaging and contents desenbod in item $ below, meets the applicable safety standards set forth in Title 10. Code of Federal Regulations. Part 71. -Packaging of Radioactrve Metonale for Transport and Transportation of Radioactive Matenal Under Certain Conditions."

[

D. That Certificate does not retteve the Consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other anpiscabie r.guistory agenc ee..nciuding ine government of any country tnrough or into wfuen tne package wisi be transponed.

j b

r7sgry,r,r,i,s issuge sasis or a sa,erv 4~4Lvs>3,argrg,rgego,egs4cgegu y

a Source Production & Equipment Source Production & Equipment Company application g

Company dated July 28, 1975, as supplemented.

!j 625 0xley Street Kenner, LA 70062 y

f oocatwuussa 1 71 9056.

a CoNoiriON:

This certshcate is conditional upon fulfilling the requirements of 10 CFR Part 71. as applicable, and theconditions specified Delow.

s.

(a) Packaging (1) Model Noc.

SPEC 2-T l

~

(2) De ion A ste.: encased, uranium shielded Gamma Ray Projector. Primary components consist of an outer steel shell.internaT bracing, depleted uranium E

lly shield, and a Zircalloy "S" tube. The contents are securely positioned in the Zircalloy "S" tube by ar source ' cable locking device and shipping plug. The unit resembles a rectangular box 12.5" long by 4.4" high by 5

4.4" wide with a gross weight of 40 pounds..

IE

_,..s

..1-l (3) Drawing l

The packaging is constructed in accordance with Source Production &

l Equipment Company Drawing No.1000, Revision No'. O.

g li I!

5.

(b) Contents y

(1) Type and form of material l

l Iridium 192 as sealed sources which meet the requirements of special s

fonn radioactive material.

p i

t i

i i

i l

I i

l l

I 1

h i

t k

2 3 e %,.c 6 T 2 --

l r

li l

ts,_______________________________________________________.

1

!~af<om4is^

U.S. NUCLEAR REGULATOR

  • COWiss'CN CONOmONS (continued) i l

Page 2 - Certificate No. 9056 - Revision No. 2 - Docket No. 71-9056 y

1 1

1j5.

(b) Contents (continued)

I h

j (2) Maximum quantity of material per package p

1 N

1 200 curies i

1 E

6.

The source must be secured in the shielded position of the packaging by the l

)

1 shipping plug, source assembly, and locking device. The shipping plug and g

1 source assembly used must be fabricated of materials capable of resisting a g

1 1475'F fire environment for one-half-hota and. maintaining their positioning F

3 function. The source assembly.,ba,hlittopi'inust(ehgage.the locking device. The N

j flexible cable of the sour,,ct assembly and shippinty p, lug.must be of sufficient j

length and diameter to prog.ilfe' positive positioning chtpsource in the shielded g

3

position, y

,9 g

a 1

N v

1 7.

The nameplates must Tfabricated of macerials capable of redsting the fire e

i test of 10 CFR Part.21 iInthnaintaining their legibility ~.'/

'e j

"J

'~.-K

,e;Q

~

8.

The packaging authorized bNthis certificate is,-hereby approved for usa under g

)

l 3

the general license provisiohs of 10 CFib.571.12. l+ -

'1 g

'3 i i.: 7 l yy;

.)

g 1 9.

Expiration date: March 31,19861 's E

-,.,,..gf

.3 9.lN-REFERENCEFr'f...NQ t.,

l-

, b~

. / y,g

~

F.d

.a 4.s,%d...

l; :7

?

[

I Source Production & Equ.ipment'iCoinpaiy applicationi deted Jdlyf2'8,194 g

i U45GrP Midj-@ O N fs M

f 1 Supplement dated: Januacy' 8, 197,6;%

/.-.#.N

.d e'

I

' c f p. y d

5:

(

6.1

/_,

3 4

' " F0dE U.S. NUCLEAlt REGULATORY COMMISSION I:

i E:

.../

.p.

p.

g i j-Q,7 - '

J 4

Charles. MacDonald, Chief f*

i Transportation Certification Branch l

Division of Fuel Cycle and f

a Material Safety, NMSS g

1 SEP 0 61983 0

i Date:

I e

t 1

I 1

[

1 L

1 E-L g

f 1

I l

Cl ei 3

pl

@f e

~

1-

.1-----------.

_

Retrieved from "https://kanterella.com/w/index.php?title=ML20128D449&oldid=4260854"