ML20111B758
| ML20111B758 | |
| Person / Time | |
|---|---|
| Site: | 05200003 |
| Issue date: | 05/06/1996 |
| From: | Mcintyre B WESTINGHOUSE ELECTRIC COMPANY, DIV OF CBS CORP. |
| To: | Quay T NRC OFFICE OF INFORMATION RESOURCES MANAGEMENT (IRM) |
| Shared Package | |
| ML19355D146 | List: |
| References | |
| AW-96-963, NUDOCS 9605150162 | |
| Download: ML20111B758 (20) | |
Text
,
Westinghouse Energy Systems Bu 355 Electric Corporation Pittsburgh Pennsylvania 15230-0355 j
AW-96-963 May 6,1996 Document Control Desk U.S. Nuclear Regulatory Commission Washington, D.C. 20555 ATTENTION:
T.R. QUAY APPLICATION FOR WITIIIIOLDING PROPRIETARY INFORMATION FROM PUBLIC DISCLOSURE
SUBJECT:
WESTINGHOUSE RESPONSES TO NRC REQUESTS FOR ADDITIONAL INFORMATION ON THE AP600
Dear Mr. Quay:
The application for withholding is submitted by Westinghouse Electric Corporation (" Westinghouse")
pursuant to the provisions of paragraph (b)(1) of Section 2.790 of the Commission's regulations. It contains commercial strategic information proprietary to Westinghouse and customarily held in confidence.
The proprietary material for which withholding is being requested is identified in the proprietary version of the subject report. In conformance with 10CFR Section 2.790, Affidavit AW-96-963 accompanies this application for withholding setting forth the basis on which the identified proprietary information may be withheld from public disclosure.
Accordingly, it is respectfully requested that the subject information which is proprietary to Westinghouse be withheld from public disclosure in accordance with 10CFR Section 2.790 of the Commission's regulations.
Correspondence with respect to this application for withholding or the accompanying affidavit should reference AW-96-963 and should be addressed to the undersigned.
Very truly yours, L/P i
Brian A. McIntyre, anager j
Advanced Plant Safety and Licensing 1
l
/nja cc:
Kevin Bohrer NRC 12H5 2763A l
9605150162 960506 PDR ADOCK 05200003 A
4 AW-96-963 i
AFFIDAVIT COMMONWEALTH OF PENNSYLVANIA:
ss COUNTY OF ALLEGHENY:
1 Before me, the undersigned authority, personally appeared Brian A. McIntyre, who, being by l
me duly sworn according to law, deposes and says that he is authorized to execute this Affidavit on i
i behalf of Westinghouse Electric Corporation (" Westinghouse") and that the averments of fact set forth j
in this Affidavit are true and correct to the best of his knowledge, information, and belief:
I l
ea.
Brian A. McIntyre, Manager Advanced Plant Safety and Licensing Sworn to and subscribed before me this day of CN 1996 v
t&
f]Ms'
/
Notary Public t w.clsed Flc"Wn Pcjr.7,IEW Pubric k'G;&:2 :L'Uc./bD'cy County f.y Cc: nfz'an Cgax,Ibv. 4,1996 2w^
Mraor,Pennc/varaaA:anaJonof tblanes i
I.
l f
.-.. -. - ~.
=..
l AW-96-%3 (1)
I am Manager, Advanced Plant Safety And Licensing, in the Advanced Technology Business Area, of the Westinghouse Electric Corporation and as such, I have been specifically
. delegated the function of reviewing the proprietary information sought to be withheld from public disclosure in connection with nuclear power plant licensing and rulemaking proceedings, and am authorized to apply for its withholding on behalf of the Westinghouse Energy Systems Business Unit.
(2)
. I am making this Affidavit in conformance with the provisions of 10CFR Section 2.790 of the Commission's regulations and in conjunction with the Westinghouse application for withholding accompanying this Affidavit.
(3)
I have personal knowledge of the criteria and procedures utilized by the Westinghouse Energy Systems Business Unit in designating information as a trade secret, privileged or as confidential commercial or financial information.
(4)
Pursuant to the provisions of paragraph (b)(4) of Section 2.790 of the Commission's j
regulations, the following is furnished for consideration by the Commission in determining whether the information sought to be withheld from public disclosure should be withheld.
(i)
The information sought to be withheld from public disclosure is owned and has been j
held in confidence by Westinghouse.
j l
(ii)
The information is of a type customarily held in confidence by Westinghouse and not customarily disclosed to the public. Westinghouse has a rational basis for determining the types of information customarily held in confidence by it and, in that connection, utilizes a system to determine when and whether to hold certain types of information in confidence. The application of that system and the substance of that system constitutes Westinghouse policy and provides the rational basis required.
Under that system, information is held in confidence if it falls in one or more of several types, the release of which might result in the loss of an existing or potential i'
competitive advantage, as follows:
2764A
I AW-96-963 l
l-l (a)
The information reveals the distinguishing aspects of a process (or component, l
structure, tool, method, etc.) where prevention of its use by any of Westinghouse's competitors without license from Westinghouse constitutes a
. competitive economic advantage over other companies.
i l
l (b)
It consists of supporting data, including test data, relative to a process (or l
component, structure, tool, method, etc.), the application of which data l
secures a competitive economic advantage, e.g., by optimization or improved
~
i marketability.
l l
(c)
Its use by a competitor would reduce his expenditure of resources or improve his competitive position in the design, manufacture, shipment, installation, l
assurance of quality, or licensing a similar product.
l (d)
It reveals cost or price information, production capacities, budget levels, or commercial strategies of Westinghouse, its customers or suppliers.
lI'
[
(e)
It reveals aspects of past, present, or future Westinghouse os customer funded development plans and programs of potential commercia! value to l
l (f)
It contains patentable ideas, for which patent protection may be desirable.
There are sound policy reasons behind the Westinghouse system which include the following:
(a)
The use of such information by Westinghouse gives Westinghouse a competitive advantage over its competitors. It is, therefore, withheld from disclosure to protect the Westinghouse competitive position.
i (b)
It is information which is marketable in many ways. The extent to which such information is available to competitors diminishes the Westinghouse ability to l
. sell products and services involving the use of the information.
j mu i
i
AW-96-963 l
l (c)
Use by our competitor would put Westinghouse at a competitive disadvantage i
by reducing his expenditure of resources at our expense.
(d)
Each component of proprietary information pertinent to a particular l
competitive advantage is potentially as valuable as the total competitive l
l advantage, if competitors acquire components of proprietary information, any l
l one component may be the key to the entire puzzle, thereby depriving l
Westinghouse of a competitive advantage.
(e)
Unrestricted disclosure would jeopardize the position of prominence of Westinghouse in the world market, and thereby give a market advantage to the competition of those countries.
l (f)
The Westinghouse capacity to invest corporate assets in research and i
development depends upon the success in obtaining and maintaining a j
competitive advantage.
(iii)
The information is being transmitted to the Commission in confidence and, under the provisions of 10CFR Section 2.790, it is to be received in confidence by the Commission.
(iv)
The information sought to be protected is not available in public sources or available l
information has not been previously employed in the same original manner or method l
to the best of our knowledge and belief.
l l
(v)
Enclosed is Letter NSD-NRC-96-4712, May 6,1996 being transmitted by Westinghouse Electric Corporation (E) letter and Application for Withholding Proprietary Information from Public Disclosure, Brian A. McIntyre (E), to Mr. T. R. Quay, Office of NRR. The proprietary information as submitted for use by Westinghouse Electric Corporation is in response to questions concerning the AP600 i
plant and the associated design certification application and is expected to be applicable in other licensee submittals in response to certain NRC requirements for justification of licensing advanced nuclear power plant designs.
I am
AW-96-%3 i-This information is part of that which will enable Westinghouse to:
(a)
Demonstrate the design and safety of the AP600 Passive Safety Systems.
l
- (b)
Establish applicable varification testing methods.
l (c)-
Design Advanced Nuclear Power Plants that meet NRC requirements.
]
l l
(d)
Establish technical and licensing approaches for the AP600 that will ultimately result in a certified design.
l (e)
Assist customers in obtaining NRC approval for future plants, j
Further this information has substantial commercial value as follows:
I i
l.
(a)
Westinghouse plans to sell the use of similar information to its customers for l
purposes of meeting NRC requirements for advanced plant licenses.
'(b)-
Westinghouse can sell support and defense of the technology to its customers in the licensing process.
Public disclosure of this proprietary information is likely to cause substantial harm to the competitive position of Westinghouse because it would enhance the ability of competitors to provide similar advanced nuclear power designs and licensing defense
(
services for commercial power reactors without commensurate expenses. Also, public l
disclosure of the information would enable others to use the information to meet NRC requirements for licensing documentation without purchasing the right to use the information.
t l
l I
l
AW-96-963 The development of the technology described in part by the information is the result of applying the results of many years of experience in an intensive Westinghouse effort and the expenditure of a considerable sum of money.
In order for competitors of Westinghouse to duplicate this information, similar technical programs would have to be performed and a significant manpower effort, having the requisite talent and experience, would have to be expended for developing analytical methods and receiving NRC approval for those methods.
Further the deponent sayeth not.
i 2764A
l 1 Westinghouse Nonproprietary RAI 440.258 1
4 t
l i
i a
L NRC REQUEST FOR ADDITIONAL INFORMATION l,
Question 440.258 Attached is a list of the AP600 drawings that INEL used to build the RELAPS input model. Which of these drawings are still valid? If they have been revised, provide a copy of the revised drawings.
l
Response
Attached please find the list of AP600 drawings used to build the RELAPS input model. The list is a l
modified version of Tables 440.258-1 and 440.258-1. They have been expanded to indicate the current I
version of these drawings. Please note that the "Date" column has been deleted. Where a new version of a drawing exists, it is also attached. Other requirements and information about these features in AP600 can be found in the SSAR.
SSAR Rev. None 1
I I
i 440.258-1 3 Westinghouse
i NRC REQUEST FOR ADDITIONAL INFORMATION
--m Table 440.258-1 Westinghouse Revision IT#
System RELAPS Drawing Replacement Reference or Drawing Title No. or Reference Drawing No.
No.
1 ADS 1100-PLK-703 Rev.
RCS-PLW-010, 011, Study Sketch Isometric Lower C
012,014,015,017, Pressurizer Letdown Piping To Spargers 2
ADS 1100-PLK-704 Rev.
018,019,01A,01B, Study Sketch Isometric upper Pressurizer 01D, O E, G,01H B
Letdown Piping To Spargers j
3 ADS 1100-PLK-701 Rev.
As Marked Study Sketch Isometric Lower D
Pressurizer Letdown Piping To Spargers 4
ADS 1100-PLK-702 Rev.
RCS-PLW-070, 080 Study Sketch Isometric Upper D
BOTH REVISION O Pressurizer Letdown Piping To Spargers 5
ADS 1100-PLK-702 Figure 2: PSADS Piping Upper Tier isometric 6
ADS 1100-PLK-703 Figure 3: PSADS Lower Riser Isometric 7
ADS 1100-PLK-705 Figure 5: Pressurizer Riser Piping -
Elevation 8
ADS 1100-PLK 701 Figure 1: Press. Safety and Automatic Depres. System (PSADS) Piping Lower Tier Isometric 9
ADS 1100-PLK-704 Figure 4: PSADS Upper Riser Isometric 10 PZR RCS-PLW-020, 021, Figure 19: Pressurizer Spray Line Plan 022,023,024,025, View 4 02,
11 PZR Figure 18: Pressurizer Spray Line Plan EVISION 0, As Marked 12 PZR Figure 17: Pressurizer Spray Line Plan View 2 13 PZR Figure 16: Pressurizer Spray Line Plan View 1 l
14 PZR Figure 15: Pressurizer Spray Line l
Section View i
l 440.258-2 T westinghouse l
NRC REQUEST FOR ADDITIONAL INFORMATION IT#
System RELAP5 Drawing Replacement Reference or Drawing Title No. or Reference Drawing No.
No.
15 PZR Figure 20: Pressurizer Spray Line Plan View 5 16 PBL PXS-PLW-054, 064, Figure 14: CMT Pressure Balance 065 Piping Section View 2 ALL REVISION 1 17 PBL F gure 13: CMT Pressure Balance Piping Section View 1 18 PBL Figure 12: Core Make-up Tank (CMT)
Pressure Balance Piping Plan View 19 ADS SEE ITEMS 1 Figure 6: PSADS Piping 3D Sketch THRU 9 ABOVE 20 ADS F gute 7: PSADS Piping and Module Plan View 21 ADS Figure 8: PSADS Piping and Module Interface Section A-A 22 ADS Figure 9: PSADS Piping Plan View 23 ADS Figure 10: PSADS Piping Section A A 24 ADS Figure 11: PSADS Piping Section K-K 25 SG MBO1 V2 001 Rev MBO1-V2-001, AP-600 Steam Generator General 2 SH 2/2 sh 1/4,2/4,3/4 Arrangement ALL REVISION 3 26 SG MBO1 V2 001 Rev AP-600 Steam Generator General 2 SH 1/2 Arrangement 27 PZR SEE ITEM 10 Pzr Spray Line (Elevation View)
THRU 15 ABOVE 28 PZR Pzr Spray Line (Plan View-1) 29 PZR Pzr Spray Line (Plan View-2) 30 PZR Pzr Spray Line (Plan View-3) 31 PZR Pzr Spray Line (Plan View-4) 32 PZR Pzr Spray Line (Plan View-5) 33
- RCPS, ET-NRC-93-4013 Response to informal INEL Request for SG, AP600 Plant Data (RCP Homologous CORE Curves, SG Tube..
34 ADS PXS-PLW-035, 036 Sketch 1: AP600 ADS 4th Stage-West l
BOTH REVISION 1 Compartment W85tiligh0USB
i i
1 NRC REQUEST FOR ADDITIONAL INFORMATION 7
IT#
System RELAP5 Drawing Replacement Reference or Drawing Title No. or Reference Drawing No.
No.
i 35 ADS Sketch 2: AP600 ADS 4th Stage-West Compartment 36 SG NTD-NRC-94-4108 Sketch 4 AP600 Steam Generator Spray Nozzle Detail 37 SG SGS-PLR-010 BOTH FWS AND Sketch 1: Feedwater Loop 1 SGS PORTIONS 38 SG SGS-PLR-020 TO BE SUPPLIED Sketch 2: Feedwater Loop 2 BY MAY 31,1996 39 SG SK MS 002 (1 of 2)
MSS-PLW-010, 011, Sketch 3: Main Steam Loop 2 012,013 ALL REVISION B "A" LOOP:
SGS-PLW-030, 031, 032,033,034,035 40 SG SK MS 002 (2 of 2)
ALL REVISION 1 Sketch 3: Main Steam Loop 2 "B" LOOP:
SGS-PLW-040, 041, 042,043,044,045 i
ALL REVISION 1 41 NRHR NTD-NRC-94-4108 Table 1: AP600 Normal Residual Heat Removal System Resistance Network Node Descriptions 42 NRHR NTD-NRC-94-4108 Table 2: AP600 Normal Residual Heat Removal System Summary of RNS Flow Path Resistance h
43 NRHR NTD-NRC-94-4108 Figure 1: AP600 Normal Residual Heat Remova! System Piping Resistance Nodal Network 44 NRHR NTD-NRC-94-4108 Figure 2: AP600 Normal Residual Heat Removal System 440.258-4 W Westingh0use
NRC REQUEST FOFI ADDITIONAL INFORMATION Table 440.258-2 Westinghouse Revision IT#
System RELAPS Drawing Replacemt Reference or Drawing Title No. or Drawing No.
Reference No.
1 Reactor M101 V1001 Rev.
M101-V2-101,102, AP600 Reactor Internals Outline Vessel 2 SH 1/2 103,104,105,106, 107,108,109,110, 2
Reactor M101 V1001 Rev. 2 111,112 AP600 Reactor Internals Outline j
Vessel SH 2/2 ALL REVISION 2 3
Reactor MV01 V2 001 Rev.
MV01-V2-001, 002, Reactor Vessel General Arrangement Vessel 1 SH 1/2 003 Elevation ALL REVISION 2 4
Reactor MV01 V2 001 Rev.
Reactor Vessel General Arrangement Vessel 1 SH 2/2 Plan 5
Reactor MV01 V2 001 Rev.
Reactor Vessel General Arrangement Vessel 1 SH 1/2 Elevation 6
Reactor MV01 V2 001 Rev.
Reactor Vessel General Arrangement Vessel 1 SH 2/2 Plan 7
Reactor M101 V1003 Rev.1 SEE ITEMS 1 AND AP600 Lower Internals Vessel SH in 2 ABOVE 8
Reactor M101 V1003 Rev.1 AP600 Lower Internals Vessel SH 2N 9
Reactor M101 V1003 Rev.1 AP600 Lower Intemals Vessel SH 3N 10 Reactor M101 V1003 Rev.1 AP600 Lower Internais Vessel SH 49 11 Reactor M101 V1003 Rev.1 AP600 Lower internals Vessel SH 5/7 12 Reactor M101 V1003 Rev.1 AP600 Lower Internals Vessel SH 69 13 Reactor M101 V1003 Rev.1 AP600 Lower Internals l
Vessel SH 7N i
l T Westingh0use i
l l
NRC REQUEST TOR ADDITIONAL INFORMATION l
IT#
System RELAP.5 Drawing Replacement Reference or Drawing Title No. or Drawing No.
Reference No.
14 Reactor RXS V2 001 Rev. 2 AP600 Reactor General Assembly Vessel SH 1/3 15 Reactor RXS V2 001 Rev. 2 AP600 Reactor General Assembly Vessel SH 2/3 16 Reactor RXS V2 001 Rev. 2 AP600 Reactor General Assembly Vessel SH 3/3 17 Reactor P1126E68 Rev. 4 AP 600 Fuel Assembly interface Vessel Parameters (.374 DIA. Fuel Rod) 18 Reactor 1101E77 Rev. 45 Top Nozzle 17x17 l
Vessel SH 1/2 19 Reactor 1101E77 Rev. 45 Top Nozzle 17x17 Vessel SH 2/2 20 Reactor 6114D42 6114D42 Secondary Core Support Energy Vessel REVISION 6 Absorber 21 Reactor 6114D43 6114D43 Secondary Core Support Housing Vessel REVISION 5 l
22 Reactor 6117E43 6117E43 17x17A Guide Tube Upper Enclosure Vessel REVISION 5 23 Reactor 6117E46 6117E46 17x17AS Guide Tube Upper Weldment Vessel REVISION 5 24 Reactor 6119E09 6?19E09 17x17A-45 Sheath Assembly (Radius)
Vessel REVISION 7 25 Reactor 6119E57 6119E57 Upper Support Column Base Vessel REVISION 5 26 Reactor 6142E11 SH 1/3 6142E11 SH 1/3 17x17 Guide Tube Enclosure Half Vessel REVISION 1 27 Reactor 6142E11 SH 2/3 6142E11 SH 2/3 17x17 Guide Tube Enclosure Half Vessel REVISION 1 28 Reactor 6142E11 SH 3/3 6142E11 SH 3/3 17x17 Guide Tube Enclosure Half Vessel REVISION 1 29 Reactor 6142E12 SH 1/3 6142E12 SH 1/3 17x17 Guide Tube Lower Weloment Vessel REVISION 3 440.258-6 3 Westinghouse
1,
=
4 NRC REQUEST FOR ADDITIONAL INFORMATION
??
R IT#
System RELAP5 Drawing Replacement Reference or Drawing Title No.or Drawing No.
Reference No.
30 Reactor 6142E12 SH 2/3 6142E12 SH 2/3 17x17 Guide Tube Lower Weloment Vessel REVISION 3 31 Reactor 6142E12 SH 3/3 6142E12 SH 3/3 17x17 Guide Tube Lower Weloment Vessel REVISION 3 32 Reactor 6142E13 SH 1/2 6142E13 SH 1/2 17x17 Guide Tube Continuous Vessel REVISION 1 Assembly 33 Reactor 6142E13 SH 2/2.
6142E13 SH 2/2 17x17 Guide Tube Continuous Vessel REVISION 1 Assembly 34 Reactor 6142E14 SH 1/2 6142E14 SH 1/2 17x17 Guide Tube Lower Assembly Vessel REVISION 1 35 Reactor 6142E14 SH 2/2 6142E14 SH 2/2 17x17 Guide Tube Lower Assembly Vessel REVISION 1 36 Reactor 6142E15 SH 1/2 MIO1-V2-201 17x17 Guide Tube Upper Assembly Vessel REVISION 2 37 Reactor 6142E15 SH 2/2 M101-V2-202 17x17 Guide Tube Upper Assembly j
Vessel REVISION 2 38 Reactor 6143E65 SH 1/4 M101-M8-201 Interface Features-Critical 17x17 Guide Vessel REVISION 2 Tube 39 Reactor 6143E65 SH 2/4 M101-M8-202 Interface Features-Critical 17x17 Guide Vessel REVISION 2 Tube 40 Reactor 6143E65 SH 3/4 M101-M8-203 Interface Features-Critical 17x17 Guide Vessel REVISION 2 Tube 41 Reactor 6143E65 SH 4/4 M101-M8-204 Interface Features-Critical 17x17 Guide Vessel REVISION 2 Tube 42 Arrang.
1000 P2 901 Rev. 3 1000-P2-901 General Arrangement Section A-A l
& Plan REVISION 8 l
43 Arrang.
1000 P2 902 Rev. 2 1000-P2-902 General Arrangement Section B-B
& Plan REVISION 8 44 Arrang.
1000 P2 903 Rev. 2 1000-P2-903 General Arrangement Sections C-C &
& Plan REVISION 8 H-H 45 Arrang.
1000 P2 904 Rev. 3 1000-P2-904 General Arrangement Section G-G A Plan REVISION 8 T Westingh0use
NRC REQUEST FOR ADDITIONAL INFORMATION i
IT#
System RELAPS Drawing Replacement Reference or Drawing Title No. or Drawing No.
Reference No.
46 Arrang.
1000 P2 905 Rev. 3 1000-P2-905 General Arrangement Section J-J
& Plan REVISION 8 47 Arrang.
1000 P2 906 Rev. 3 1000-P2-906 General Arrangement Section K-K
& Plan REVISION 8 48 Arrang.
1000 P2 907 Rev. 2 1000-P2-907 General Arrangement Section D-D, E-
& Plan REVISION 8 E, F-F, N-N Arrang.
1000-P2-908 General Arrangement Section M-M
& Plan REVISION 8 Arrang.
1000-P2-909 General Arrangement Sections 1-1, P-P
& Plan REVISION 8
& R-R 49 Arrang.
1010 P2 001 Rev. 3 1010-P2-001 General Arrangement Plan at El. 66'-6
& Plan REVISION 8 50 Arrang.
1020 P2 001 Rev. 3 1020-P2-001 General Arrangement Plan at El. 82'-6"
& Plan REVISION 8 51 Arrang.
1020 P2 002 Rev. 2 1020-P2-002 General Arrangement Plan at El. 96*-6"
& Plan REVISION 8 52 Arrang.
1030 P2 001 Rev. 3 1030-P2-001 General Arrangement Plan at El.100'-
& Plan REVISION 8 0" & 107'-2" 53 Arrang.
1040 P2 001 Rev. 2 1040-P2-001 General Arrangement Plan at El.117'-
& Plan REVISION 8 6"
54 Arrang.
1050 P2 001 Rev. 2 1050-P2-001 General Arrangement Operating Deck
& Plan REVISION 8 El.135'-3" 55 Arrang.
1060 P2 001 Rev. 2 1060-P2-001 General Arrangement Roof Plan El.
& Plan REVISION 8 160'-6" & 153'-0" 56 Arrang.
1070 P2 001 Rev. 2 1070-P2-001 General Arrangement Plan at El.160'-
& Plan REVISION 8 6" & 180'-0" 57 AP600 Pressurizer Heater Support Pzr.
Platebracket 58 AP600 Retaining Basket Pzr.
59 AP600 MV20 V2101 Rev.1 Pressurizer Heater Assembly Pzr.
440.258-8 3 Westliighouse
l NRC REQUEST FOR ADDITIONAL INFORMATION l
IT#
System RELAPS Drawing Replacement Reference or Drawing Tit;e No. or Drawing No.
{
Reference No.
60 AP600 MV20 V2 001 Rev.
MV20-V2-010 Pressurizer General Arrangement and Pzr.
2 SH 1/3 REVISION 1 Details 61 AP600 MV20 V2 002 Rev.
MV20-V2-011 Pressurizer General Arrangement and Pzr.
2 SH 2/3 REVISION 1 Details 62 AP600 MV20 V2 003 Rev.
MV20-V2-012 Pressurizer General Arrangement and Pzr.
2 SH 3/3 REVISION 1 Details 63 AP600 MV20 V1001 Rev.
MV20-V2-101,102, AP600 Pressurizer Outline 16004G00 Pzr.
1 103,104 Cu. Ft.
i ALL REVISION 1 64 AP600 MV20 V1002 Rev.
AP600 Pressurizer Outline 16001000 Pzr.
1 Cu. Ft.
65 AP600 PLO1 V2 001 Rev. 3 PLO1-V2-001 Primary Coolant Loop Outline Loops SH 1/7 REVISION 5 66 AP600 PLO1 V2 001 Rev. 3 PLO1-V2-002 Primary Coolant Loop Outline l
Loops SH 2/7 REVISION 5 67 AP600 PLO1 V2 001 Rev. 3 PLO1-V2-003 Primary Coolant Loop Outline Loops SH 3/7 REVISION 5 68 AP600 PLO1 V2 001 Rev. 3 PLO1-V2-004 Primary Coolant Loop Outline Loops SH 4/7 REVISION 5 69 AP600 PLO1 V2 001 Rev. 3 PLO1-V2-005 Primary Coolant Loop Outline Loops SH 5/7 REVISION 5 70 AP600 PLO1 V2 001 Rev. 3 PLO1-V2-006 Primary Coolant Loop Outline Loops SH 6/7 REVISION 5 71 AP600 PLO1 V2 001 Rev. 3 PLO1-V2-007 Primary Coolant Loop Outline Loops SH 7/7 REVISION 5 l
1 1
l 1
440.258-9 3 Westinghouse j
i l
NRC REQUEST FOR ADDITIONAL INFORMATION IT#
System RELAPS Drawing Replacement Reference or Drawing Title No. or Drawing No.
l Reference No.
i w.
i l72 ECCS STRBRD09.ROA FOR DVI-A:
Figure 21: IRWST Discharge Piping PXS-PLW-010, 011, Plan View 134"x48" 012,013,014,015, 73 ECCS No Number 016,017 Figure 22: IRWST Discharge Piping Plan View 2 34"x48"
'I" 74 ECCS STRBRD11.ROA Figure 26: IRWST Discharge Piping Ma ed Section D-D 34"x48" 75 ECCS STRBRD12.ROA FOR DVl-B:
Figure 23: IRWST Discharge Piping
~
PXS-PLA-020, 021, Section A-A 34"x48" 022, 023, 024, 025, 7e ECCS S"R3RD13.ROA 026,027,028,029 Figure 25: IRWST Discharge Piping 02A,02B Section C-C 34'x4B" 77 ECCS STRBRD14.ROA ALL REVISION 2, Figure 24: IRWST Discharge Piping As Marked Section B-B 34"x48" l
78 ECCS No Number SEE TABLE Loop-to-CMT Pressure Balance Line 440.258-1, ITEMS "A" View Looking South 34"x48" 16 THRU 18 79 ECCS No Number Loop-to-CMT Pressure Balance Line -
Plan View 34"x48" l
80 ECCS No Number Loop-to-CMT Pressure Balance Line Elevation View Looking West 34"x48" 81 ECCS MO-129-127 Rev. F PXS-PLW-043, 044 Study Sketch Passive PRHR Supply &
(PRHR)
SH 1 BOTH REVISION 2 Ret., Pres. Letdown Piping to Spargers
& Misc. Piping 82 ECCS MO-129-127 Rev. F Study Sketch Passive PRHR Supply (PRHR)
SH 2
& Ret., Pres. Letdown Piping to Spargers & Misc. Piping 83 ECCS 1150-PLK-001 SH 3 CURRENT Plan (above Elev.135'-3")
i C
84 ECCS 1100-PLK-803 SH 4 9 **
O Y DRESS CAS AND DWS.
85 dCCS MO-129-127 Rev. F THERE IS NO Section "5-4" Typical Bend Symbol SH 5 CURRENT Shown Out of Plane d6 ECCS MO-129-127 Rev. F EQUIVALENT TO Section "6-4" (PRHR)
SH 6 THE "RELAP5" SET t
= SHOWN HERE.
440.258-10 D
LN westinghouse
l NRC REQUEST FOR ADDITIONAL INFORMATION P
IT#
System RELAP5 Drawing Replacement Reference or Drawing Title No. or Drawing No.
Reference No.
87 ECCS MO-129-127 Rev. F Section "7-A" (PRHR)
SH 7 88 ECCS MO-129-127 Rev. F Section "8-A" (PRHR)
SH 8 89 ECCS MO-129-127 Rev. F Detail '9-A", Detail "9-B", Detail "9-c" SH 9 90 ECCS 1120-PLK-001 Rev.
Study Sketch East composite Below B SH 1 Elevation 107'-2" Plan View "1-A" Elev.
82'-6" (Piping) 91 ECCS 1120-PLK-002 Rev.
Plan View "2A" Elev. 82'-6" B SH 2
~
92 ECCS 1120-PLK-003 Rev.
Plan View "3-A" Elev. 96'-6" B SH 3 93 ECCS 1120-PLK-004 Rev.
Plan "4-A" Elev. 96'-6" B SH 4 94 ECCS 1120-PLK-005 Rev.
Section "5-A" LKG West B SH 5 95 ECCS 1123-PLK-001 Rev.
Section "6-A" B SH 6 96 ECCS 1123-PLK-002 Rev.
Section '7-A" B SH 7 97 ECCS 1124-PLK-001 Rev.
Section '8-A" B SH 8 98 ECCS 1120 PLK-006 Rev.
Plan View "9-A" Elev. 82'-6" (Steel B S -l 9 Only) 99 ECCS 1120-PLK-007 Rev.
Plan "10-A" Elev. 96'-6" (Steel Only)
B SH 10 100 ECCS 1120-PLK-008 Rev.
Section "11-A" LKG West (Steel Only)
B SH 11 101 ECCS 1124-PLK-002 Rev.
Section "12-A" B SH 12 m 8m W westinghouse
I i
O NRC REQUEST FOR ADDITIONAL INFORMATION 1..
il
.j.
l IT#
System RELAP5 Drawing Replacement l Reference or Drawing Title No.or Drawing No.
Reference No.
102 ECCS ADP5245DMYXM00 MT01-V1-001 Disegno Di Massima Core Make-up 3
REVISION 3 Tank Assembly Drawing MT01-V1-002 REVISION 1 l
103 ECCS ADP5245DMYXM00 MT01-V2-001 Disegno Di Massima Core Make-up j
1 REVISION 2 Tank Outline DWG MT01-V2-002 REVISION 1 440.258-12 3 Westinghouse l
!