ML20105A268

1 to Updated Safety Analysis Report, Chapter 17, Quality Assurance

ML20105A268
Person / Time
Site:	Clinton
Issue date:	03/31/2020
From:	Exelon Generation Co
To:	Office of Nuclear Reactor Regulation
Shared Package
ML20105A242	List: ML20105A243 ML20105A244 ML20105A245 ML20105A246 ML20105A247 ML20105A248 ML20105A249 ML20105A250 ML20105A251 ML20105A252 ML20105A253 ML20105A255 ML20105A256 ML20105A258 ML20105A259 ML20105A260 ML20105A261 ML20105A262 ML20105A263 ML20105A264 ML20105A265 ML20105A267 ML20105A268 ML20105A269 ML20105A270 ML20105A271 ML20105A273 ML20105A275 ML20105A277 ML20105A295 ML20105A296 ML20105A297 ML20105A298 ML20105A299 ML20105A300 ML20105A301 ML20105A302 ML20105A303 ML20105A304 ML20105A305 ML20105A306 ML20105A307 ML20105A308 ML20105A309 ML20105A310 ML20105A311 ML20105A312 ML20105A313 ML20105A314 ML20105A315 ... further results
References
RS-20-028
Download: ML20105A268 (2)

Text

CPS/USAR CHAPTER 17 - QUALITY ASSURANCE TABLE OF CONTENTS PAGE

17.0 INTRODUCTION

17.1-1 17.1 QUALITY ASSURANCE DURING DESIGN AND CONSTRUCTION 17.1-1 17.2 QUALITY ASSURANCE DURING THE OPERATIONS PHASE 17.1-1 CHAPTER 17 17-i REV. 11, JANUARY 2005

CPS/USAR CHAPTER 17 - QUALITY ASSURANCE

17.0 INTRODUCTION

Exelon has ultimate responsibility for assuring that the Clinton Power Station is designed, constructed, tested, and operated in compliance with applicable regulations, codes, and standards and in a manner to protect the health and safety of the public. In meeting this responsibility, a Quality Assurance program has been established and implemented which complies with the provisions of:

a. Title 10, Code of Federal Regulations Part 50 Appendix B, "Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants",

b. American Society of Mechanical Engineers (ASME) NQA-1 (1994) "Quality Assurance Program Requirements for Nuclear Facilities",

c. American National Standard ANSI N18.7-(1976) "Administrative Controls and Quality Assurance for the Operational Phase of Nuclear Power Plants", and

d. Applicable sections of the American Society of Mechanical Engineers (ASME)

Boiler and Pressure Vessel Code.

The Clinton Power Station Quality Assurance Manual is structured in accordance with the outline of the eighteen criteria of Appendix B to 10CFR50 and Revision 3 of the NRC Regulatory Guide 1.70, "Standard Format and Content of Safety Analysis Reports for Nuclear Power Plants

- LWR Edition". Section 17.1, Quality Assurance During Design and Construction, in the PSAR, covered activities occurring up to the turnover of a system, structure, or component by the constructor to IP for checkout and testing. Section 17.2, Quality Assurance During the Operations Phase, describes the Quality Assurance program applicable to activities during the Operations Phase.

17.1 QUALITY ASSURANCE DURING DESIGN AND CONSTRUCTION The Quality Assurance Program for design and construction of Clinton Power Station was described in the Illinois Power Nuclear Power Construction Quality Assurance Manual.

17.2 QUALITY ASSURANCE DURING THE OPERATIONS PHASE The Quality Assurance Program for Operation of Clinton Power Station is described in the Quality Assurance Topical Report (QATR) NO-AA-10. The QATR is incorporated by reference.

CHAPTER 17 17.1-1 REV. 17, OCTOBER 2015