ML20099G707
| ML20099G707 | |
| Person / Time | |
|---|---|
| Site: | North Anna  |
| Issue date: | 08/10/1992 |
| From: | Berkow H Office of Nuclear Reactor Regulation |
| To: | |
| Shared Package | |
| ML20099G712 | List: |
| References | |
| NUDOCS 9208170179 | |
| Download: ML20099G707 (10) | |
Text
3 J
p* *f cg
.e
, *f
?$
8 n
UNITED STATES I
t i
NUCLEAR REGULATORY COMMISSION
[
WASHINGTON D C. 20646 p
%,....*/
VIRGINIA ELECTRIC AND POWER COMPANY OLD DOMINION ELECTRIC COOPERAT!yf l
DOCKET NO. 50-338 1
HORTH ANNA POWER STAT 1QL UNIT NO. I i
AMENDMENT TO FACIllTY OPERATING LICENSE Amendment No.164 License No. NPF-4 l
1.
The Nuclear Regulatory Commission (the Comission) has found that:
A.
The _ application for amendment by Virginia Electric and Power Company et al., (the licensee) dated June 8, 1992, complies with the--
standards and requirements of the Atomic Energy Act of 1954, as
' amended (the Act), and the Commission's rules and regulations set-
-forth in 10 CFR Chapter It B.
The facility will operate in conformity with the application, the provisions of the Act, and.the rules and regulations of the Commission; that the activities authorized by There is reasonable assurance (i)ithout. endangering the health and C.
this-amendment can be conducted w safety of the public,. and (ii) that such-activities will be conducted in compliance with the Commission's regulations; D..
The issuance of this amendment will not be inimical to-the common defense and security or to the health and safety of the public; and E.-
The.. issuance of this amendment is in accordance with 10 CFR Part 51-of the Commission's regulations and all applicable requirements have
-been satisfied.
L I
l 9208170179 920010 PDR-ADOCK 05000339 p
_PDR-
.. 2.
Accordingly, the license is amended by changes to the Technical Speci-fications as indicated in the attachment to this license amendment, and paragraph 2.D.(2) of Facility Operating License No. NPF-4 is hereby amended to read as follows:
(2) lefj.nical Soecifications The Technical Specifications contained in Appendices A and B, as revised through Amendment No.164, are hereby incorporated in the license.
The licensee shall operate the facility in accordance with the Technical Specifications.
3.
This license amer.dment is effective as of its date of issuance and shall I
be implemented within 30 days.
FOR TH NUCLEAR REGULATORY COMMISSION H rbert N. Berkow, Director Project Directorate 11-2 Division of Reactor Projects - 1/11 Office of Nuclear Reactor Regulation
Attachment:
Changes to the Technical Specifications
-Date of Issuance:
August 10, 1992 1
l.
l l
l l
l
ATTACHMENT TO LICENSE AMENDMENT NO.164 TO FACILITY OPERATING LICENSE NO. NPF-4 DOCKET NO. 50-338 Replace the following page of the Appendix "A" Technical Specifications with the enclosed page as indicated.
The revised page is identified by a:nendment number and contains vertical lines indicating the area of change.
The corresponding overleaf page is also provided to maintain document completeness.
R_emove Paae Insert Pa9c 3/4 0-1 3/4 0-1
T4 LIMITING CONDITIONS FOR OPERATION AND SURVFILLANCE REOUIREMENTS 3/4 0 APPLICABILITY LIMIT 1NG CONDIT10N FOR OPERATION 3.0.1 Urrrtiro Condrtions for Operat6on and ACTION requirements shall be app 6 cable during the OPERATIONAL MODES or other condtions spedfied for ea0h Spedication.
3.0.2 Adherence to the requirements of the UrNting Condrtion for Operation andor assodated ACTION within the specified time 1.'Iterval shall constitute compliance with the Speerfication, in the event the Limit lrg Co6ction for Operation is restored prior to expiration of the spedfied tirne irnerval, completion of the ACTION statement is rol required.
3.0.3 When a Umrting Condtion for Operation is not met, except as provided in the assodated ACTION requ'rements, witNn one hour AC'ilON shall be irvtialed to place the unrt in a MODE in wNeh the Speofication does not apply by plac'ng it, as ambcable, in :
1.
At least HOT STN4DBY within 6 nours, 2.
At least HOT SHUTDOWN within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, and 3.
At least COLD SHUTDOWN witNn the following 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.
Whcre corrective measures are completed that permit operation under the ACTION requirements, the ACTION may be taken in accordance with the speofied time limits as measured from the time of failure to meet the Umiting Condition for Operation. Exceptions to these requirements are stated in the iridividual Speofications This specification is not applicable in MODES 5 or 6.
3.0.4 Entry into an OPERATIONAL MODE or other specified applicabihty condition shall not be made unless the cor6tions of the Urnting Condition for Operation are met without relance on provisions contained in the ACTION statements unless otherwise excepted. TNs provision shall not prevent passage through OPERATIONAL MODES as required to comply with ACTION statements.
3.0.5 When a system, subsystem, train, component, or device is determined to be Inoperable solely because its emergency power source is inoperable, or solely because its normal power source is inoperable,it may be considered OPERABLE for the purpose of satisfying the requirements 01 sts appkcable Umiting Condition for Operation, provided:
1.
Its corresponding normal or emergency power source is OPERABLE, and 2.
All of its redundant system (s), subsystem (s), train (s), component (s), and device (s) are OPERABLE, or likewise satisfy the requirements of tNs Specification.
Unless both conditions 1. and 2. above are satisfied witNn one hour ACTION shall be initiated to place the unit in a MODE in which the SpeOfication does not appiy by placing it, as applicable, in:
1.
At least HOT STANDBY witNn 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, 2.
At least HOT SHUTDOWN witNn the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, and 3.
At least COLD SHUTDOWN within the following 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.
Exceptions to these requirements are stated in the individual Specifications. TNs Specification is not applicable in MODES 5 or 6.
I NORTH ANNA UNIT 1 3/4 0 1 Arnendment No. U,4,f 2,164 l
r
1 ADPLICABILITV
_SURVElu.ANCE REQURDAENTS SurveillEnce Requirements shall bw applicable during the OPERATIONAL MODE 4.0.1 olhar conditions specified for individual Limiting Conditions for Operation unless otherwise stated in an individual Surveillance Requirement.
4.0.2 Each Survalliance Requirement shall be per1:,rmed within the specified surveillance interval with a maximum allowable extension not to exceed 25 percent of the surveillance l
Inte rval, i
4.0.3 Failure to perform s Surwiliance Requirement within the allowed survolhncs interval.. defined by Cpecification 4.0.2, shsil constitute noncompilance with the ope reqdrements for a Umiting Cer'dition for Operation. The time limits of the action statement requirements are applicable at the time it is identified that a surveillance requirement has not been performed. The action sta'ement requirements may be delayed for up to 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> e l
permit the comDletion of the surveillance when the allowable outage time limits of the action statement tvguirements are less than 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />. Surveillance requirements do not have to be performed on inoparable equipment.
4.0.4 Entry into an OPERATIONAL MODE or other specified appik: ability condition shall not be made unless tha Surveillance Requirement (s) associated with the Umiting Condition for
(
Operation have been performed within the stated surveillance interval or as otherwise specified.
4.0.5 Surveillance Requirements for inservice inspection and tesong of ASME Code Class 1,2, and 3 commnents shall be applicable as follows:
Inservice inspection of ASME Code Class 1,2, and 3 components and inservice a.
testing of ASME Code Class 1,2. and 3 pumps and vanes shall be performed in accordance with Section XI of the ASME Boller and Pressure Vesssi Code and applicable Addenda as required by 10 CFR 50, Section 50.55a(g), except where specific written relief has been granted by the Commission pursuant to 10 CFR 50, Section 50.55a(g)(6)(i).
NORTH ANNA UNIT 1 3/4 02 Amendment No. 79,129, i
- \\
UNITED STATES 3T i
NUCLEAR REGULATORY COMMISSION I
W ASHINGToN. D C. 7X/.e o
a/
11RQJHIA ELECTRIC AND POWER COMPANY QLD DOMINION ELECTRIC COOPERATIVE DOCKET NO. 50-339 NORTH ANNA POWER STAT 10N. UNIT NO. 2 AMENDMENT TO F_A_lLITY OPERATING LICENSE Amendment No. 144 License No, NPF-7 1.
The Nuclear Regulatory Comission (the Comission) has fot.nd that:
A.
The application for amendment by Virginia Electric and Power Company et al., (the licensee) dated June 8, 1992, complies with the standards and requirements of the Atomic Energy Act of 1954, as amended (the Act), and the Commission's rules and regulations set forth in 10 CFR Chapter I; 8.
The facility will operate in conformity with the application, the provisions of the Act, and the rules and regulations of the Comission; C.
There is reasonable assurance (1) that the activities authorized by this amendment can be conducted without endangering the health and safety of the public, and (ii) that such activities will be conducted in compliante with the Comnission's regulations; D.
The issuance of this amendment will not be inimical to the comon defense and security or to the health and safety of the public; and E.
The issuance of this amendment is in accordance with 10 CFR Part 51 l
of the Comission's regulations and all applicable requirements have been satisfied.
l
.. 2.
Accordingly, the license is amended by changes to the Technical Speci-fications as indicated in the attachment to this license amendment, and paragraph 2.C.(2) of Facility Operating License No. NPF-7 is hereby amended to read as follows:
(2) J3chnical Specifications it.e Technical Specifications contained in Appendices A and B, as revised through Amendment No.
144, are hereby incorporated in the license.
The licensee shall operate the facility in accordance with the Technical Specifications.
3.
This license amendment is effective as of its date of issuance and shall be implemented within 30 days.
FOR THE NUCLEAR REGULATOM COMHISSION
?
He bert N. Berkow, Director Project Directorate 11-2 Division of Reactor Projects - I/II Office of Nuclear Reactor Regulation
Attachment:
Changes to the Technical Specifications Date of issuance:
August 10, 1992
allasBMINI TO LICENSE AMENOMENT NO.144 i
JL fAC.!LITY OPERATING llCENSE NO. NPF-7 DOCKET NO. 50-339 Replace the following page of the Appendix "A" Technical ir.ecifications with the' enclosed page as indicated.
The revised page is identified by amendment number and contains vertical lines indicating the area of change.
The corresponding overleaf page is also provided to maintain document completeness.
Remove Pa.gg-Insert Page 3/4 0-1 3/4 0-1
)
i I
l l
L y-y-
w b,
u+en-e m,4 yp.
J' 6--w a
14 LIMITING CONDITIONS FOR OPERATION AND SURVFft t ANCE REQUIREMENTS E APPLIC ABILITY LIMITING CONDITION FOR OPERATlON 3.0.1 Compliance with the Umibng Condrtions for Operation contained in the succeedng speerfications is required during the OPERATIONAL MODES or other condtions specified therein; except that upon f ailure to meet the Unvting Cordtions for Operation, the assodated ACTION requirements shall be met.
3 0.2 Noncompliance with a specification shall exist when the requirements of the Urnting Condtion for Operation and associated ACTION requirements are not met within the specified tme intervals. If the Umiting Conction for Operation is restored prior to expiration of the specified time intervals, conipletion of the ACTION requirements is not required 3 0.3 When a Umiting Cordtien for Operation is not met, except as provided in the associated ACTION requirements, within one hour ACTION shall be Irvtiated to place the unit in a MODE in which the Spechcation oses not apply by placirs it, as applicable. in :
1.
At least HOT STANDBY within 6 hcurs, 2.
At least HOT SHUTDOWN within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, and 3.
At least COLD SHUTDOWN within the following 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.
Where corrective measures are completed that permit operation under the ACTION requirements, the ACTION may be taken in accordance with the speofied time limits as rneasured from the time of f ailure to meet the Limiting Condition for Operation. Exceptions to these requirements are stated in the indvidual spechcations. This speofication is not applicabie in MODES 5 or 6.
3.0.4 Entry into an OPER ATIONAL MODE or other specified condition shall not be made unless the conditions of the Limiting Constion for Operation are met without reliance on provisions contained in the ACTION requirements. This provision shall not prevent passage through OPERATIONAL MODES as required to comply with ACTION requirements. Exceptions to these requirements are stated in the individual specifications.
3.0.5 When a system, subsystem, train, component, or device is determined to be inoperable solely because its emergency power source is inoperable, or solely because its normal power source is inoperable. it may be considered OPERABLE for the purpose of satisfying the requirements of its applicable Umsting Condition for Operation, provided:
1.
Its correspondng normal or emergency power source is OPERABLE, and 2.
All of its redundant system (s), subsystem (s), train (s), a>mponent(s), and device (s) are OPERABLE, or likewise satisfy the requirements of tNs Specification.
Unless both cond!!ons 1, and 2 above are sabsfied, within one hour ACTK)N shall be initiated to place the unit in a MODE in which the Spoofication does not apply by placing it, as app 6 cable,in :
1 At least HOT STANDBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, 2.
At least HOT SHUTDOWN within the next 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />, and 3.
At least COLD SHUTDOWN within the following 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />.
Exceptions to these requirements are stated in the individual Specifications. This Specification is not applicable in MODES S or 6.
NORTH ANNA UNIT 2 3/4 0 1 Amendment No. 4, 144
a s
APPUCABILITY SURWit. LANCE REOOREMENTS Surveillance Requirements shall be met during the OPERATIONAL MODES or otn 4.0.1 conditions specified for individual Umiting Conditions for Operation unless otherwise stated in an individual Surveillance Requirement.
4.0.2 Each Surveillance Requirement shall be performed within the specified surveillance interval with a maximum allowable extension not to exceed 25 percent of the surveillance interval.
4.0.3 Failure to perform a Surveillance Requirement within the allowed surveillance interval, defined by Specification 4.0.2, shall constitute normompliance wdh the operabil requirements for a Umiting condi:lon for Operation. The time limits of the action statement requirements are applicable at the time il is identified that a surveillance requirement has not been performed. The action statement requirements may be delayed for up to 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> to permit the completion of the surveillance when the allowable outage Ome limits of the action statement requirements are less than 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br />. Surveillance requirements do not have 10 be performed on inoperabio equipmente 4.0.4 Entry into an OPERATIONAL MODE or other specified condition shall not be made unless the Surveillance Requirement (s) associated with the Umiting Condition for Operation have been performed within the stated surveillance interval or as otherwise specified.
4.0.5 Surveillance Requirements for inservice inspection and testing of ASME Code Class 1,2, and 3 components shall be applicable as follows:
- a. _
inservice inspection of ASME Code Class 1,2, and 3 components and inservice testing of ASME Code Class 1,2, and 3 pbmpo and vakes shall be performed in accordance 'with Section XI of the ASME Boiler and Pressure Vessel Code a applicable Addends'as required by 10 CFR 50, Section 50.55a(g), except where specific wrfften relief has been granted by the Commission pursuant to 10 CFR 50, Section 50.55a(g)(6)(l).
\\
NORTH ANNA UNIT 2 3/4 02 Amendment No, 113.
_... _ _. _ _. _ _. -. _.. _ _.. -.. _. _ _. _ -. ~,, _ _