ML20077F800
| ML20077F800 | |
| Person / Time | |
|---|---|
| Site: | Millstone  |
| Issue date: | 12/06/1994 |
| From: | Miller D NORTHEAST NUCLEAR ENERGY CO. |
| To: | NRC OFFICE OF INFORMATION RESOURCES MANAGEMENT (IRM) |
| References | |
| MP-94-659, NUDOCS 9412150080 | |
| Download: ML20077F800 (11) | |
Text
.
Nordicasi Rope Ferry Rd. (Route 156), Waterford CT 06385 Nuclear Eriergy Millstone Nuclear Power Station Northeast Nuclear Energy Company P.O. Box 128 Waterford, CT 06385-0128 (203) 447 - 1791 Fax (203) 444-4277 The Northeast Utilities System Docket No. 50-423 RE: 10CCR50.36 December 6, 1994
~ ' ' "
U.S. Nuclear Regulatory Commission Document Control Desk Washington, D.C. 205S5 Millstone Nuclear Power Station Un" "
3 Transmittal of Revised CORE OPERATING LIMITd Mt: PORT (COLR)
In accordance with Millstone Unit No. 3 Technical Specification 6.9.1.6.d, the Northeast Nuclear Energy Company hereby submits Revision 2 of the CORE OPERATING LIMITS '
REPORT for the remainder of Cycle 5 operation. This revision addresses only four loop operation, and it supersedes the previous Report that was submitted November 8,1993.(1)
The revision corrects discrepancies that were identified by the fuel vendor in the Wz functions, and lowers the FAH limit to regain the generic DNBR margin thatwas lost due to the rotated grids on the Vantage-5 fuel. If you have any questions, please contact Kimberley Uncoln at (203)444-5284.
Very truly yours, NORTHEAST NUCLEAR ENER ?CO
'ANY I
Donald B. Mille *r, Jr.
Senior Vice President-Millstone Sta1in (1) S. E. Scace (NNECO) letter to U.S. Nuclear Regulatory Commission, " Transmittal of Core Operating Limits Report (COLR)," MP-03-893, November 8,1993.
DBM:ljs Attachment cc:
T. T. Martin, Region I Administrator P. Swetland, Senior Resident inspector, Millstone Unit Nos.1,2, and 3 V.L. Rooney, NRC Project Manager, Millstone Unit No. 3 DR ADOCK 0500o423 p
ffl 5 bh f f?f)
l Mn.t.rrosE Unrr 3 - CYCL.E 5, COLR, REVIs!ON 2 SEPTEMBER 1994 Y
Millstone Unit 3 Cycle 5 Core Operating Limits Report 1.0 Core Operating Limits Report
' Ills Core Operating Limits Report (COLR) for Millstone Unit No. 3, Cycle 5 has been prepared in accordance with the requirements of Technical Specification 6.9.1.6.
The Technical Specifications affected by this report are listed below.
3/4.1.1.3 Moderator Temperature Coefficient 3/4.1.3.5 Shutdown Rod Insertion Limit 3/4.1.3.6 Control Rod Insertion Limits (Four Loop) 3/4.2.1.1 Axial Flux Difference - Four Loop 3/4.1.2.1 Heat Flux Hot Channel Factor - Four Loop 3/4.2.3.1 Nuclear Enthalpy Rise Hot Channel Factor - Four Loop 3/4.3.1 Table 4.3-1 Note 19, Shutdown Margin Monitor Setpoint 2.0 Operating Limits The cycle-specific parameter limits for the specifications listed in Section 1.0 are presented in the following subsections. These limits have been developed using the NRC-approved methodologies specified in Technical Specification 6.9.1.6.
2.1 Moderator Temperature Coefficient (Specification 3/4.1.1.3) 2.1.1 The Moderator Temperature Coefficient (MTC) limits are as follows:
4 The BOUARO/0% - 70% RTP MTC shall be less positive than + 0.5 x 10 Ak/k/'F.
Above 70% RTP, the MTC limit is a linear ramp to 0 Ak/k/'F at 100% RTP.
4 The EOUARO/RTP MTC shall be less negative than - 5.65 x 10 Ak/k/*F.
Rev, o9/2s/94 3:17pm 1
- .J
- ' MILurroNE UNrr 3 - CYCLE 5, COLR, REVISION 2 SEPTEMBER 1994.
I 4
2.1.2 The MTC surveillance limit is as follows:
The. 300 ppm /ARO/RTP MTC should be less negative than or equal to
- 4.9 x 104 Ak/k/*F.
3 k
where: BOL stands for Beginning Of Cycle Life ARO stands for All Rods Out HZP stands for Hot Zero Power EOL stands for End Of Cycle Life j
RTP stands for Rated Dermal Power 2.2 Shutdown Rod Insertion Ilmit (Specification 3/4.1.3.5)
The shutdown rods shall be at least 222 steps withdrawn (inclusive).
2.3 Control Rod Insertion Limits (Specification 3/4.1.3.6)
The control rod banks shall be limited in physical insertion as shown in Figure'I for four-loop operation.
2.4 Axial Rux Difference (Four - Loop Operation) (Specification 3/4.2.1.1)
J i
2.4.1 The Axial Flux Di#erence (AFD) limits are provided in Figure 2.
2.4.2 De AFD target band during base load operation is i 5%.
2.4.3 De minimum allowable (nuclear design) power level for base load operation (APL*) is 80%
of Rated Thermal Power.
2.5 Heat Mux Hot Channel Factor (Four-Loop Operation) - F (Z) (Specification 3/4.2.2.1) q F (Z) s E %
- K(Z) for P > 0.5 n
P F (Z) s FRTP n
3
- K(Z) for P s 0.5
0.5 where
P = Thermal Power Rated Hermal Power 2.5.1 FRTPg = 2.60.
Rev. 09/2s/94 3:17pm 2
Mitt. STONE UNrr 3 - CYCLE 5, COLR, RsvisioN 2 SEITEMBER 1994 Y
' 2.5.2 K(Z) is provided in Figure 3.
2.5.3 W(Z) values are provided in Table 1.
2.5.4 W(Z)at. values for base load operat'on are provided in Table 2.
[
2.6 IIeat Flux Hot Channel Factor Surveillance (Four-Loop Operation) - F (Z) q (Specification 3/4.2.2.1.2)
FM (Z) s FRTP g
- K(Z) for P > 0.5 P
- W(Z)
FM (Z) s pRTP
- K(Z) for P s 0.5 g
0.5
- W(Z) where: P =
Thermal Power Rated Thermal Power N H (S ecification 3/4.2.3.1) 2.7 Nuclear Enthalpy Rise Ilot Channel Factor (4-Ioop Operation) - F P
Fa g pRTP o(} 4 pp e[].pj)
N n
where: P = Thermal Power Rated Thermal Power 2.7.1 FRTP 1.54.
=
2.7.2 PFan = 0.3.
2.8 Shutdown Margin Monitor Alarm Setpoint (Specification 3/4.3.1 Table 4.3-1 Note 19)
The Shutdown Margin Monitor Alarm Setpoint shall be set to less than or equal to, two (2) times the J
reference countrate.
Rev 09/28/94 3:17pm 3
F MILLSTONE UNrr 3 - CYCLE 5, COLR, REVISION 2 SEPTEMBER 1994 Figure 1 Control Rod Bank Insertion Limits versus Thermal Power - Four Loop Operation 225
[
0.254,222 0.754,222
/
200 NKB
[
/
175 7 1.0,isr b
0.0*164
-e150-
/
=iii
)
%KC
/
m
- 125
/
m
.$j100 e
n.
A8 75 NKD
=
R ce 50 0.0,50 25 0.28,0 1
0
.00
.20
.40
.60
.80 1.00 Fraction of Rated Thermal Power I
Rev. 09/26/94 9:12am 4
l MrustoxE UNrr 3 CYCLE 5, COLR, REVISION 2 SEFTENCER 1994 Figure 2 Axial Flux Difference Limits as a Function of Rated Thermal Power for Four Loop Opension 120
-17,100 12,100 100 UNACCEPTABLE Ur@CCEPTABLE OPERATON OPERATON 80 g
ti ACCEPTABLE p
OPERATON l!
60 b
35,50 30,50 40 20 0 50 30 10 0
10 20 30 40 50 60 Rux Difference, % Delta-1 Rev. 09/26/94 9:12arn 5
Miu STONE UNrr 3 - CYCLE 5, COLR, REVISION 2 SEPTEMBER 1994 Figure 3' K(Z) - Normalized F (Z) as a Function of Core Height n
for Four Loop Operation 1.20 0.0,1.0 6.0,1.0 1 00 12.0,0.925.
m D
0.80 A
i b.60 0
i S
- 0.40 0.20 0.00 0
2 4
6 8
10 12 Corelieight (feet)
)
Rev. 09/26/94 9:12am 6
4 l
Mn.l.srONE UNrr 3 - CYCLE 5, COLR, REVISION 2 SEPTEMBER 1994 I
Table 1 Four Loop RAOC W(Z) Function Millstone Unit 3 - Cycle 5 Burnup Itanges (MWD /MTU)
Mesh Axia! 0 150 1000 2000 3000 4000 6000 8000 10000 12000 14000 16000 18000 19000 No.
Height 150 1000 2000 3000 4000 6000 8000 10000 12000 14000
- 16000, 18000 19000 EOL Top of Core 1
12.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 2
11.8333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 3
11.6667 I.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1,0000 1.0000 1.0000 4
11.5000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 5
11.3333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 6
11.1667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 7
11.0000 1.0000 1.0000 1.0000 1,0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 8
10.8333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 9
10.6667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 10 10.5000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 11 10.3333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 12 10.1667 1.3076 1.3421 1.3662 1.3697 1.3697 1.3591 1.3896 1.4155 1.4155 1.4126 1.3868 1.3475 1.3249 1.3136 13 10.0000 1.2836 1.3213 1.3471 1.3501 1.3501 1.3343 1.3615 1.3874 1.3874 1.3858 1.3627 1.3276 1.3077 1.2978 14 9.8333 1.2642 1.3022 1.3280 1.3304 1.3304 1.3134 1.3342 1.3581 1.3581 1.3571 1.3368 1.3063 1.2890 1.2804 15 9.6667 1.2502 1.2839 1.3071 1.3101 1.3101 1.2962 1.3101 1.3279 1.3279 1.3258 1.3083 1.2827 1.2676 1.2600 16 9.5000 1.2348 1.2632 1.2838 1.2890 1.2890 1.2810 1.2869 1.2956 1.2956 1.2920 1.2788 1.2603 1.2485 1.2427 17 9.3333 1.2179 1.2447 1.2655 1.2738 1.2738 1.2709 1.2688 1.2695 1.2695 1.2647 1.2556 1.2439 1.2354 1.2312 18 9.1667 1.2035 1.2316 1.2546 1.2662 1.2673 1.2673 1.2642 1.2599 1.2547 1.2489 1.2423 1.2351 1.2285 1.2252 19 9.0000 1.1975 1%I0 1.2425 1.2576 1.2660 1.2674 1.2674 1.2575 1.2456 1.2381 1.2336 1.22 % 1.2242 1.2216 20 8.8333 1.1947 1.2143 1.2341 1.2507 1.2635 1.2675 1.2675 1.2541 1.2382 1.2302 1.2281 1.2275 1.2239 1.2221 21 8.6667 1.1900 1.2120 1.2331 1.2492 1.2599 1.2610 1.2610 1.2468 1.2315 1.2255 1.2286 1.2286 1.2277 1 372 22 8.5000 1.1851 1.2100 1.2332 1.2496 1.2590 1.2590 1.2580 1.2428 1 274 1.2245 1.2305 1.2315 1.2320 1.2328 23 8.3333 1.1801 1.2072 1.2319 1.2491 1.2584 1.2584 1.2565 1.2405 1.2249 1.2250 1.2338 1.2368 1.2383 1.2405 34 8.1667 1.1748 1.2039 1.2301 1.2476 1.2563 1.2563 1.2535 1.2375 1.2228 1.2268 1.2388 1.2441 1.2468 1.2508 25 8.0000 1.1691 1.2013 1.2298 1.2480 1.2559 1.2559 1.2517 1.2352 1.2207 1.2276 1.2422 1.2493 1.2529 1.2583 26 7.8333 1.1632 1.1985 1.2292 1.2481 1.2553 1.2553 1.24 %
1.2323 1.2177 1.2269 1.2438 1.2525 1.2568 1.2633 27 7.6667 1.1570 1.1945 1 269 1.2461 1.2526 1.2526 1.2456 1.2277 1.2134 1.2250 1.2440 1.2542 1.2593 1.2670 38 7.5000 1.1504 1.1898 1.2234 1.2428 1.2483 1.2483 1.2403 1.2227 1.2100 1.2225 1.2427 1.2540 1.2596 1.2600 29 7.3333 1.1436 1.1845 1.2190 1.2381 1.2427 1.2427 1.2339 1.2169 1.2059 1.2190 1.2399 1.2518 1.2577 1.2667 30 7.1667 1.1363 1.1782 1.2132 1.2321 1.2357 1.2357 1.2261 1.2096 1.2002 1.2139 1.2356 1.2482 1.2545 1.2639 31 7.0000 1.1285 1.1709 1.2061 1347 1.2275 1.2275 1.2173 1.2011 1.1930 1.2074 I.2299 1.2431 1.2498 1.2597 32 6.8333 1.1209 1.1631 1.1980 1.2159 1.2181 1.2181 1.2073 1.1914 1.1844 1.1993 1.2225 1.2363 1.2433 1.2536 33 6.6667 1.1146 1.1555 1.1890 1.2060 1.2074 1.2074 1.1960 1.1804 1.1745 1.1900 1.2140 1285 1.2357 1.2466 34 6.5000 1.1108 1.1486 1.1795 1.1948 1.1956 1.1956 1.1838 1.1682 1.1638 1.1805 1.2062 1.2220 1.2299 1.2417 35 6.3333 1.1088 1.1423 1.1695 1.1826 1.1826 1.1826 1.1703 1.1548 1.1521 1.1706 1.1985 1.2160 1.2248 1.2379 36 6.1667 1.1069 1.1358 1.1589 1.1696 1.1696 1.1647 1.1558 1.1403 1.1395 1.1597 1.1899 1.2091 1.2187 1.2331 37 6.0000 1.1272 1.1521 1.1718 1.1806 1.1806 1.1743 1.1608 1.1262 1.1270 1.1487 1.1807 1.2014 1.2117 1 2 72 38 5.8333 1.1276 1.1475 1.1624 1.1676 1.1676 1.1591 1.1450 1.1130 1.1173 1.1383 1.1693 1.1897 1.1999 1.2151 39 5 6667 1.1345 1.1495 1.1592 1.1597 1.1597 1.1474 1.1322 1.1045 1.1128 1.1308 1.1572 1.1751 1.1841 1.1975 40 5.5000 1.1440 1.1580 1.1666 1.1666 1.1658 1.1521 1.1358 1.1080 1.1143 1.1297 1.1528 1.1682 1.1759 1.1874 41 5.3333 1.1538 1.1687 1.1780 1.1780 1.1774 1.1637 1.1464 1.1168 1.1196 1.1332 1.1545 1.1681 1.1749 1.1851
- Distance imm Bottom of Active Core (feeO.
Rev. 09/28/94 3:17pm 7
Q MILLSTONE UNrr 3 - CYCLE 5, COLR, REVISION 2 SEl'TEMIER IM4 l
Table 1 (cont.)
i Four Loop RAOC W(Z) Function Millstone Unit 3 - Cycle 5 Burnup Rangu (MWD /hfrU) l Muh Axial 0 150 1000 2000 3000 4000 6000 8000 10000 12000 14000 16000 18000
'*1 No.
Height 150 1000 2000 3000 4000 6000 8000 10000 12000 14000 16000 18000 19000 EUI.
i 42 5.1667 1.1632 1.1782 1.1872 1.1872 1.1861 1.1713 1.1533 1.1237 1.1254 1.1382 1.1577 1.1701 1.1763 1.1855 43 5.0000 1.1736 1.1878 1.1960 1.1960 1.1940 1.1783 1.1596 1.1301 1.1315 1.1423 1.1599 1.1708 1.1763 1.1844
)
44 4.8333 1.1842 1.1972 1.2043 1.2043 1.2013 1.1851 1.1660 1.1364 1.1366 1.1458 1.1616 1.1710 1.1757 1.1828 45 4.6667 1.1940 1.2058 1.2116 1.2116 1.2078 1.1910 1.1715 1.1420 1.1415 1.1495 1.1636 1.1719 1.1760 1.1822 46 4.5000 1.2032 1.2138 1.2184 1.2184 1.2136 1.1961 1.1763 1.1470 1.1461 1.1529 1.1654 1.1726 1.1761 1.1815 47 4.3333 1.2123 1.2211 1.2242 1 2242 1.2186 1.2009 1.1812 1.1520 1.1503 1.1559 1.1668 1.1728 1.1758 1.1802 48 4.1667 1.2209 1.2274 1.2289 1.2289 1.2229 1.2058 1.1867 1.1573 1.1540 1.1545 1.1679 1.1727 1.1751 1.1787 49 4.0000 1.2287 1.2329 1.2329 1.2328 1.2264 1.2102 1.1923 1.1626 1.1580 1.1609 1.1688 1.1723 1.1741 1.1768 50 3.8333 1.2376 1.2385 1.2385 1.2361 1.2296 1.2146 1.1981 1.1677 1.1619 1.1623 1.1685 1.1706 1.1717 1.1734 51 3.6667 1.2499 1.2492 1.2448 1.2388 1.2319 1.2196 1.2056 1.1739 1.1658 1.1635 1.1681 1.1689 1.1693 1.1698 52 3.5000 1.2636 1.2613 1.2497 1.2394 1.2332 1.2256 1.2162 1.1832 1.1725 1.1687 1.1728 1.1729 1.1730 1.1730
$3 3.3333 1.2751 1.2721 1.2565 1.2437 1.2375 1.2319 1.2251 1.1921 1.1808 1.1759 1.1791 1.1791 1.1785 1.1782 54 3.1667 1.2858 1.2831 1.2691 1.2561 1.2473 1.2373 1.2273 1.1967 1.1885 1.1842 1.1847 1.1847 1.1834 1.1828 3.0000 1.3050 1.3024 1.2877 1.2722 1.2582 1.2412 1.2261 1.1986 I.1955 1.1939 1.1966 1.1970 1.1972 1.1974 56 2.8333 1.3319 1.3282 1.3085 1.2876 1.2688 1.2478 1.2302 1.2059 1.2069 1.2088 1.2139 1.2165 1.2178 1.2198 57 2.6667 1.3619 1J565 1.3284 1.3010 1.2794 1.2591 1.2437 1.2222 1.2243 1.2272 1.2328 1.2364 1.2381 1.2408 58 2.5000 1.3926 1.3854 1.3485 1.3142 1.2899 1 ' 05 1.2582 1.2407 1.2437 1.2467 1.2518 1.2555 1.2573 1.2601 59 2.3333 1.4234 1.4143 1.3687 1.3275 1.3001 1.2812 1.2720 1.2594 1.2635 1.2663 1.2704 1.2741 1.2759 1.2787 60 2.1667 1.4541 1.4432 1.3886 1.3404 1.3100 1.2919 1.2856 1.2779 1.2829 1.2856 1.2888 1.2925 1.2943 1.2970 61 2.0000 1.4843 1.4716 1.4081 1.3527 1.3195 1.3020 1.2988 1.2959 1.3018 1.3045 1.3067 IJ103 1.3121 IJ148 62 1.8333 1.5136 1.4990 1.4266 1.3645 1.3284 1.3116 1.3116 1.3132 1.3200 1.3226 1.3238 1.3274 1.3291 1.3318 63 1.6667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 64 1.5000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000, 1.0000 1.0000 1.0000 65 1.3333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 66 1.1667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 67 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 68 0.8333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 - 1.0000 1.0000 1.0000 69 0.6667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.000') 1.0000 1.0000 70 0.5000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.00t 0 1.0000 1.0000 71 0.3333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 72 0.1667 1.0000 1.0u00 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 73 0.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 llottom of core
- Distance fmn Bottom of Active Core (feet).
Rev. 09/28/94 3:17pm 8
JQ MlusronE Unrr 3 - CYCLE 5, COLR, REVIStoa 2 SEI'rEMBER 1994 3
Table 2
+
Four Loop Base Load W(Z) Function Millstone Unit 3 - Cycle 5 Burnup Rangu (MWD /MTU)
Mesh Axial 0
!$0 1000 2000 3000 4000 M00 8000 10000 12000 14000 16000 18000 19000 No.
Height 150 1000 2000 3000 4000 6000 8000 10000 12000 14000 1200 18000 19000 EOL Top of Core l
12.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 2
11.8333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 3
Il.6667 I.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 l.0000 1.0000 1.0000 4
11.5000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 11.3333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 6
11.1667 I.0000 1.0000 1.0000 I.0000 I.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 t.0000 1.0000 1.0000 7
11.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 8
10.8333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 9
10.6667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 '
10 10.5000 1.0000 1.0000 1.0000 I.0000 1.0000 I.0000 I.0000 1.0000 1.0000 t.0000 1.0000 1.0000 1.0000 1.0000 II 10,3333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 12 10.1667 1.2560 1,2548 1.2484 1.2408 1.2082 1.1832 1.1985 1.2138 1.2138 1.2136 1.2133 1.2066 1.1998 1.1998 13 10.0000 1.2442 1.2435 1.2395 1.2347 1.2012 1.1755 1.1882 1.2009 1.2011 1.2012 12012 1.1943 1.1874 1.1874 14 9.8333 1.2321 1.2318 1.2296 1.2271 1.1932 1.1675 1.1781 1.1887 1.1891 1.1895 1.1895 1.1825 1.1755 1.1755 15 9.6667 1.2196 1.2195 1.2188 1.2180 1.1850 1.1603 1.1694 1.1785 1.1787 1.1789 1.1789 1.1720 1.1650 1.1650 16 9.5000 1.2055 1.2070 1.2088 1.2088 1.1768 1.1543 1.1621 1.1699 1.1699 1.1695 1.1691 1.1628 1.1565 1.1565 17 9.3333 1.1891 1.1933 1.1983 1.1983 1.1670 1.1481 1.1554, 1.1627 1.1627 1.1612 1.1597 1.1541 1.1485 1.1485 18 9.1667 1.1734 1.1798 1.1872 1.1872 1.1573 1.1418 1.1488 1.1558 1.1558 1.1538 1.1518 1.1472 1.1425 1.1425 19 9.0000 1.1661 1.1729 1.1809 1.1809 1.1536 1.1386 1.1429 1.1473 1.1476 1.1479 1.1479 1.1458 1.1436 1.1436 20 8.8333 1.1622 1.1684 1.1757 1.1757 1.1522 1.1383 1.1405 1.1427 1.1446 1.1465 1.1465 1.1455 1.1444 1.1444 21 8.6667 1.1563 1.1626 1.1700 1.1700 1.1502 1.1401 1.1426 1.1451 1.1460 1.1468 1.1468 1.1446 1.1423 1.1423 22 8.5000 1.1500 1.1587 1.1689 1.1689 1.1500 1.1438 1.1463 1.1487 1.1499 1.1511 1.1511 1.14 % 1.1480 1.1480 23 8.3333 1.1436 1.1553 1.1692 1.1692 1.1504 1.1476 1.1497 1.1518 1.1547 1.1575 1.1582 1.1588 1.1591 1.1596 24 8.1667 1.1378 1.1518 1.1683 1.1683 1.1504 1.1508 1.1526 1.1543 1.1591 1.1638 1.1668 1.1697 1.1712 1.1735 25 8.0000 1.1349 1.1509 1.1697 1.1697 1.1533 1.1546 1.1559 1.1571 1.1638 1.1705 1.1758 1.1810 1.1836 1.1875 26 7.8333 1.1340 1.1514 1.1718 1.1718 1.1574 1.1580 1.1587 1.1593 1.1678 1.1763 1.1839 1.1914 1.1952 1.2009 27 7.6667 1.1332 1.1513 1.1727 1.1727 1.1604 1.1604 1.1603 1.1603 1.1704 1.1806 1.1902 1.1998 1.2046 1.2118 28 7.5000 1.1318 1.1505 1.1725 1.1725 1.1621 1.1621 1.1618 1.1615 1.1726 1.1839 1.1951 1.2062 1.2118 1.2202 29 7.3333 1.12 % I.1488 1.1714 1.1714 1.1626 1.1626 1.1622 1.1618 1.1737 1.1860 1.1984 1.2107 1.2169 1.2262 30 7.1667 1.1268 1.1463 1.1692 1.1692 1.1621 1.1621 1.1614 1.1607 1.1734 1.1867 1.2001 1.2135 1.2202 1.2303 31 7.0000 1.1234 1.1430 1.1660 1.1660 1.1604 1.1604 1.1594 1.1584 1.1717 1.1860 1.2004 1.2147 1.2719 1.2327 32 6.8333 1.1192 1.1387 1.1616 1.1616 1.1580 1.1580 1.1565 1.1550 1.1687 1.1839 1.1991 1.2143 1.3 19 1.2333 33 6.6667 1.1144 1.1337 1.1564 1.1564 1.1552 1.1552 1.1529 1.1506 1.1644 1.1804 1.1964 1.2124 1.2204 1.2324 34 6.5000 1.1110 1.1293 1.1509 1.1509 1.1520 1.1520 1.1487 1.1454 1.1588 1.1754 1.1921 1.2088 1.2172 1.2298 35 6.3333 1.1087 1.1254 1.1450 1.1450 1.1479 1.1479 1.1436 1.1393 1.1523 1.1695 1.1868 1.2040 1.2126 1.2255 36 6.1667 1.1068 1.1214 1.1386 1.1386 1.1428 1.1428 1.1374 1.1321 1.1448 1.1628 1.1808 1.1988 1.2078 1.2213 37 6.0000 1.1282 1.1411 1.1563 1.1563 1.1559 1.1559 1.1493 1.1237 1.1362 1.1552 1.1743 1.1933 1.2028 1.2171 38 5 8333 1.1260 1.1367 1.1493 1.1493 1.1488 1.1488 1.1416 1.1155 1.1277 1.1470 1.1663 1.1856 1.1953 1.2099 39 5.6667 1.1236 1.1324 1.1427 1.1427 1.1421 1.1421 1.1352 1.1093 1.1208 1.1390 1.1573 1.1755 1.1846 1.1983 40 3.5000 I.1222 1.1301 1.1395 1.1395 1.1391 1.1391 1.1319 1.1060 1.1161 1.1332 1.1503 1.1674 1.1760 1.1889 41 5.3333 1.1209 1.1285 1.1376 1.1376 1.1371 1.1371 1.1295 1.1032 1.!!:2 1.1286 1.1451 1.1615 1.1697 1.1820
- Distance from Bonorn of Active Core (feeO.
Rev. 09/28/94 3.17pm 9
r
a JQ MIu, STONE UNrr 3 - CYCL,E 5, COLR, REVISION 2 SEI'TEMBER 1994 Y
Table 2 (cont.)
Four loop Base lead W(Z) Function Millstone Unit 3 - Cycle 5 Bumup Ranges (MWD /MTU)
Mesh Axia' 0
150 1000 2000 3000 4000 6000 8000 10000 12000 14000 16000 18000 19000 No, Wight 150 1000 2000 3000 4000 6000 8000 10000 12000 14000 16000 18000 19000 EOL 42 5.1667 1.1188 1.1259 1.1342 1.1342 1.1338 1.1338 1.1259 1.0994 1.1078 1.1239 1.1401 1.1562 1.1643 1.1765 43 5.0000 1.!!64 1.1228 1.1302 1.1302 1.1306 1.1306 1.1223 1.0958 1.1035 1.1191 1.1348 1.1504 1.1582 1.1699 44 4.8333 1.!!35 1.1191 1.1258 1.1258 1.1274 1.1274 1.1192 1.0924 1.0992 1.1140 1.1288 1.1436 1.1510 1.1621 45 4.6667 1.1103 1.1151 1.1209 1.1209 1.1237 1.1237 1.1155 1.0889 1.0947 1.1084 1.1221 1.1358 1.1427 1.1531.
46 4.5000 1.1087 1.1123 1.1166 1.1166 1.1194 1.1194 1.1115 1.0852 1.0900 1.1025 1!I51 1.1276 -1.1339 1.1434 47 4.3333 1.1093 1.1111 1.1131 1.1131 1.1148 1.1148 1.1072 1.0812 1.0850 1.0963 1.1076 1.1189 1.1246 'l.1332 48 4.1657 1.1118 1 !!!6 1.1108 1.1104 1.!!O4 1.1100 1.1027 1.0772 1.0800 1.0899 1.0999 1.1098 1.1148 1.1223 49 4.0000 1.1142 1.1136 1.1103 1.1073 1.1073 1.1044 1.0977 1.0729 1.0750 1.0835 1.0920 1.1005 1.1048 1.1113 50 3.8333 1.1163 1.1152 1.1097 1.1050 1.1050 1.1002 1.0938 1.0692 1.0698 1.0767 1.0836 1.0905 1.0940 1.0993 51 3.6667 1.1181 1.1168 1.1093 1.1038 1.1038 1.0984 1.0917 1.0670 1.0654 1.0703 1.0753 1.0802 1.0827 1.0865 52 3.5000 1.!!97 1.1181 1.1089 1.1026 1.1026 1.0962 1.0904 1.0665 1.0639 1.0669 1.0699 1.0729 1.0744 1.0767 53 3.3333 1.1215 1.1195 1.1082 1.10!!
1.1011 1.0941 1.0896 1.0671 1.0643 1.0658 1.0673 1.0688 1.06 %
1.0708 54 3.1667 1.1241 1.1217 1.1082 1.1011 1.1011 1.0941 1.0902 1.0681 1.0653 1.0662 1.0671 1.0680.l.0685 1.0693 55 3.0000 1.1292 1.1267 1.1121 1.1055 1.1055 1.0990 1.0938 1.0704 1.0670 1.0687 1.0704 1.0720 1.0728 1.0740 56 2.8333 1.1407 1.1377 1.1214 1.1138 1.1138 1.1062 1.1004 1.0763 1.0731 1.0755 1.0780 1.0805 1.0818 1.0838 57 2.6667 1.1589 1.1554 1.1350 1.1241 1.1241 1.1131 1.1090 1.0865 1.0849 1.0872 1.0895 1.0918 1.0930 1.0948 58 2.5000 1.1779 1.1736 1.1493 1.1348 1.1348 1.1203 1.1181 1.0972 1.0971 1.0991 1.1012 1.1032 1.1042 1.1057 59 2.3333 1.1965 1.1915 1.1635 1.1457 1.1457 1.1279 1.1272 1.1078 1.1090 1.1108 1.1126 1.1144 1.1153 1.1167 60 2.1667 1.2154 1.2098 1.1779 1.1567 1.1567 1.1367 1.1367 1.1201 1.1215 1.1229 1.1243 1.1256 1.1263 1.1274 61 2.0000 1.2343 1.2280 1.1923 1.1676 1.1676 1.1461 1.1461 1.1329 1.1339 1.1348 1.1358 1.1367 1.1372 1.1380 62 1.8333 1.2526 1.2456 1.2063 1.1783 1.1783 1.1550 1.1550 1.1452 1.1458 1.1463 1.1469 1.1474 1.1477 1.14F2 63 I.6667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 64 1.5000 1.0000 1.0000 1.0000 1.0000 10000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 65 1.3333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 66 1.1667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 67 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 68 0.8333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 69 0.6667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 70 0.5000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 71 0.3333 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 72 0.1667 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 73 0.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 Ikmom of Core
- Distance from Bottom of Active Core (feet).
Rev. 09/28/94 3:17pm 10
_ _ _ -