ML20003F140
| ML20003F140 | |
| Person / Time | |
|---|---|
| Site: | Hartsville, Phipps Bend  |
| Issue date: | 04/13/1981 |
| From: | Mills L TENNESSEE VALLEY AUTHORITY |
| To: | James O'Reilly NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION II) |
| References | |
| 10CFR-050.55E, 10CFR-50.55E, NCR-SDDR-12, NUDOCS 8104200287 | |
| Download: ML20003F140 (2) | |
Text
60' 0 ?
f7 r 'z2siz vw
- a. ;: c ;, --
r 3 ; ; :- -
\\1D z- \\
400 Chestnut Street Tower II V'
h\\
April 13, 1981 fD l ggiy Pt q?> ,4g# ~Qi!
gni Mr. James P. O'Reilly, Director E
Office of Inspection and Enforcement
/,
U.S. Nuclear Regulatory Commission 4/
N Region II - Suite 3100 101 Marietta Street Atlanta, Georgia 30303
Dear Mr. O'Reilly:
HARTSVILLE AND PHIPPS BEND NUCLEAR PLANTS - REPORTABLE DEFICIENCY -
INADEQUATE SUPPORT OF CONDENSATE HEADER (NCR SDDR-12)
Initial notification of the subject deficiency was made to NRC-0IE, Region II, Inspector R. W. Wright on July 16, 1980. Enclosed are revisions to our final report which was submitted on August 15, 1980.
If you have any questions, please call Jim Decer at FTS 857-2014 Very truly yours, TENNESSEE VALLEY AITTHORITY L. M. Mills, Manager Nuclear Regulation and Safety Enclosure ec:
Mr. Victor Stello, Director (Enclosure) g/
Office of Inspection and Enforcement V
U.S. Nuclear Regulatory Commission Washington, DC 20555
'6o/7
.s I(
6 O naeno Y
,, ;d.. ?
4 ENCLOSURE HARTSVILLE AND PHIPPS BEND NUCLEAR PLANTS INADEQUATE SUPPORT OF CONDENSATE HEADER 10 CFR PART 50.55(e)
REPORT NO. 2 (REVISION TO FINAL)
NCR SDDR-12
~
Description of Deficiency The last sentence of this section should be changed to read:
"The condensate header for unit A1 has not been completely installed as implied by our final report. It has been positioned in place, but no supports or hangers have been attached and installation has not been inspected or approved."
Corrective Actions The last two sentences of the first paragraph in this section should be changed to read:
"The Hartsville unit A1 condensatt header will be supported with the new support spreader noted above. The revised drawing, SN-310123, revision 2, was issued by C. F. Braun on October 10, 1980, to take care of this problem."
Please note that TVA is now in compliance since design revisions have been completed and no backfitting is necessary.
.. _,