ML19350E960

Certificate of Compliance 9086,Revision 7,for Model HN-100,Series 1

ML19350E960
Person / Time
Site:	07109086
Issue date:	06/05/1981
From:	Macdonald C NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS)
To:
Shared Package
ML19350E958	List: ML19350E957 ML19350E960
References
NUDOCS 8106230696
Download: ML19350E960 (3)

Text

.-,

f Form NRC 61f, U.S. NUCLEAR REGULATORY COMMISSION u2 73)

CERTIFICATE OF COMPLIANCE g cpp For Radioactive Materials Packages 1.(a) Cer ificate Number l 1.(b) Revision No.

1 fc) Pi 1.(d.) Pages No. 1.(e)2 Totat No. Pages USA /96iraoe Identification No.

86/A 1

9086 7

2. PFEAMSLE 2.(a)

This certificate is issued to satisf y Sections 173 a934,173.394.173.335, and 173.396 3f the Department of Transportation Hazardous Vateria!s Reaulations (43 CFR 170183 and 14 CFR 103) and Sections 146-13-10a W 146-19-100 of the Department of Transportation Gangerous Cargoes Regulations (46 CFR 146-149), as amended.

2.Ib)

The pacwaging and contents described in stem S below, meets the safety standards set forth in Subpart C of Title 10, Code of Federal Regulations. Part 71, " Packaging of Radioactive Materiais for Transport and Transportation of Radioactive Material Under Certain Conditions!*

2.fcl This certificate does not relievc the consignor from corroliance with any reouirement of the regulations of the U.S. C@artment of Transportation or other applicable regulatory agencies. including the governrnent of.ny country through or into whict the package will be transported.

3. This certificate is issued on the basis of a safety analysis report of the pacnage desagri or appeicatx>n-3.(a)

Prepared by (flame and address):

3.(b)

Title and identification of report or aposicaticn:

Hittman Nu-lear & Development Hittman Nuclear & Development Corporation application Corporation dated January 13, 1977, as supplemented 9190 Red..unch Road Co:umbia, Maryland 21045 71-9085

, g _,,,

4.

CONDITIONS This cerri icate is conditional upen ha fulfilling of the requirements of Suboart O of 10 CC A 71, as arsplicaole, and the conoitions specified f

in item 5 below.

5. Description of Pacirspng and Authorited Contents, Model Numcer, Fissile Class. Other Conditions, and

References:

(a) Packariing (1) Model No.: HN-100 Series 1 (2) Description A steel encased, lead shielded cask for low specific activity material.

The cask is a right circular cylinder 81.5 in hes high by 82.75 inches in c

diameter. The cask cavity is 73.5 inches high by 75.5 inches in diameter.

The cask side wall consists of a 3/8-inch thick inner steel shell, a 1-3/4-inch lead shell, arid a 7/8-inch thick outer steel shell. The base is a 4-inch'tl.ick steel plate which is welded to the inner and outer steel shells of the side wall. A steel flange is welded to the inner and outer steel shells of the side wall at the top.

The lid is a 4-inch thick steel plate which is stepped to mate with the steel flange.

The cask closure is sealed by a Viton or BUNA-N 0-ring gasket located l

between tne lid and steel flange.

Positive lid closure is accomplished by thirty,1-inch bolts.

The lid contains a centrally located 4-inch stepped steel shield plug. The shield plug is sealed by a Viton or SUNA-N 0-ring gasket, and sixteen, 1/2-inch bolts are used to provi w l

positive closure.

Tie-down is accomplished by four tie-down lugc welded to the cask body.

There are three casks lif ting lugs, three lid lifting lugs, and one shield plug lif ting lug.

The package gross weight is 50,000 punds.

810 e e 306%

g

=, v, 2 -n Page.2 -: Certificate.No. ;9086' ; Revision No. 7 ' Docket No. 71-9086 e

(a)' LPackaging (continued)

-(3)~0rawings The packaging is constructed in accordance with Hittman Nuclear

& Development Corporation Drawing Nos. C001-5-9125, Revision 2; C001 9126, Revision 11;.and CC01-3-9127, Revision-1.~

-(b) Contents.

(1). Type and form of material Process solids:either dewatered, solid or solidified meeting.the require-ments :for'. low specific ~ activity radioactive material, in secondary containers.

(2) Maximum quantity of mate' rial per package

. Greater than. Type A quantities of radioactive material with the weight

.of the contents, secondary containers and shoring not exceeding:14,500

. pounds.

4 6.-

. Shoring shall be.pitced between secondary containers and the cask cavity to minimize movement:during normal -conditions of ^ transport.

7.

The' lid an'd shield plug lifting lugs shall not be used for lifting the cask, and shall be ' covered in transit.-

8.

Prior to each. shipment, the packaging lid seals shall be inspected.

The seals shall be replaced with new seals if inspection shows any defects or-every twelve (12) months, whichever occurs first.

9.

The package: authorized by this certificate shall be transported on a motor vehicle, railroad car, aircraft, inland watercraft, or hold or deck of a seagoing vessel assigned for-the sole use of the licensee.

10. --The package authorized by this certific&te is hereby approved for use under the general license provisions of 10 CFR-571.12(b).

1,1.

Expiration date: August 31, 1982.

i-

\\

b e

. v.

r.

i..

g-

2. W r;-

{;;.

3. ;

~

p

-.Page13 - Cartificate No. 9036~ - Revision flo.. 7 - Docket. No. 71-9086 m

~REFEREllCES~

.).Hi.ttmanLflucl.esr & Development Corporation application' date'd January 13, 1977.-

~

Supplements dated:-~ = 0ctober 6,1977;' September 11, 1978; March 17, 1980; March 9, and'

'May 5,;1981.

l FOR THE:U.S. NUCLEAR REGULATORY C0t1 MISSION o

Charles E. Ma & 0. 8 f-

~

cDonaE,' Chief

i. ansportation Certification Branch Division of Fuel Cycle and F-Material Safety -

T ate: '

JU:t 0 51331 D

(

0

!.1 i

x 1

/

l $, '

.; v 4

. f ';

t i

_,,,.,eL,_..

.4

.-,.,