ML19337A103
| ML19337A103 | |
| Person / Time | |
|---|---|
| Site: | 07109039 |
| Issue date: | 08/19/1980 |
| From: | Macdonald C NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS) |
| To: | |
| Shared Package | |
| ML19337A102 | List: |
| References | |
| NUDOCS 8009080457 | |
| Download: ML19337A103 (2) | |
Text
..
e
~
e O
Form NRC418 U.S. NUCLEAR REGULATORY COMMIS$loN u2 3)
CERTIFICATE OF COMPUANcE 3g g q,
For Rsdioactive Materieds Packages 1.fal Cartificate Nurneer 1.!b) Revision No.
1.fcl Package identification No.
1.'d) Pages No. 1.fe) Total No. Pages 9039 5
USA /9039/B( )
i
?
2.PREAM8LE 2.lal This certificate is issued to satisfy Sectione 173.393a.173.394,173.395, and 173.396 of tt.e Department of Transoortstion Hazardous Meterials Regulations 149 CPR 170189 and 14 CFR 103) and Sections 146-19-10e and 146-19-100 of tne Department of Transoortation Dangerous Cargoes Regulations (46 CFR 146-1491. as amended.
2.Ibl The packaging and contents described in item 5 be6ow, meets the safety standards set forth in Suboort C of Tide 10 Code of Federse Regulations. Part 71, ** Packaging of Rm2ioective Materials for Transoort and Transportation of Radioactive Material Under Certain Conditions.-
2.fcl This certificate des not relieve the consignor from como6iance with any requirement of the regulations of the U.S. cepanment of Transportation or cther acosicaele regulatory. agencies, inducing the government of any country throuen or into which the package will be transported.
- 3. This certificate is issued on the basrs of a safety.><9sas report of the package design or apodication-.
3.fal Prepared by (Name and address):
3.(b)
Title and identification of report or apodication-Technical Operations, Inc.
Technical Operations, Inc. application dated Northwest Industrial Park April 11, 1980.
l Burlington, MA 01803
~
3.lel Docket No.
ay1_oggo 4 CONDITIONS This certificate is conditional upon the fulfilling of the requirements of Suepart O of 10 CFR 71, as applicacie, arri the conditions specified in item 5 below.
- 5. Cescript.on of Packaging and Autnorized Contents. Model Number, Fissde Class Otner Conditions and Referencas:
G) Packaging (1) Model No.:
715 (2's Description.
A protective overpa'ck for radiographic devices. The overpack consists of an MS-27683-2, 1.8 gage steel drum; 14 gage clamp closure ring fastened by a bolt; 1.5 inches of Mil-I-2781 or Mil-2819 high temperature insulation; and a molded rubberized hair filler material.
Overall dimensions of the over-pack are approximately 15.5-inch diameter by 24-inch high.
Maximum weight including contents is 105 pounds.
(3) Drawings The radiographic devices, as secondary packaging authorized for use in the overpack are constructed in accordance with the following Technical Operations, Inc. Drawing Nos.:
Model No.
Drawing Nos.
533 053301, Rev. B 616 D61699, Rev. 0 644 D64400, Rev. I 713 C71301, Rev. 0 053301, Rev. B 8009080 N
Page 2 - Certificate No. 9039 - Revision No. 5 - Docket No. 71-9039 5.
(b) Contents (1) Type and form of material Iridium-192 as sealed sources that meet the requirements of special form as defined in S71.4(o) of 10 CFR Part 71.
(2) Maximum quantity of material per package (i) 120 curies contained in the Model No. 533, Model No. 644 or Model No. 713 radiographic device.
(ii) 240 curies contained in the Model No. 616 radiographic device.
6.
Source assemblies for use in this packaging are limited to trose assemblies as identified in Technical Operations, Inc. Drawing No. C42400, Rev. F, Sheet 2, and
~
Sheet 3 of 3.
7.
Separate molded filters shall be used for each model type radiographic device to ensure a snug fit within the cverpack.
8.
Nameplates shall be fabricated of materials capable of resisting the fire test of 10 CFR Part 71 and maintaining their legibility.
9.
The packaging authorized by this certificate is hereby approved for use under the general license prr/Ji3 ions of 10 CFR 571.12(b).
10.
Expiration date:
August 31, 1985.
REFERENCE Technical Operations, Inc. application dated April 11, 1980.
FOR THE U.S. NUCLEAR REGULATORY COMMISSION Charles E. PalcDonald, Chief Transportation Certification Branch Division of Fuel Cycle and Material Safety AUG 191980 Date: