ML19324C998

From kanterella
Jump to navigation Jump to search
IMC 1245 App D1 Maintaining Qualifications
ML19324C998
Person / Time
Issue date: 02/18/2020
From: Kenneth Kolaczyk
NRC/NRR/DRO/IRSB
To:
Kolaczyk K
Shared Package
ML19324C952, ML20049A001 List:
References
CN 20-008, DC 20-001
Download: ML19324C998 (16)
v • d • e


Text

NRC INSPECTION MANUAL IRSB INSPECTION MANUAL CHAPTER 1245, APPENDIX D1 MAINTAINING QUALIFICATIONS Effective Date: 02/18/2020

Table of Contents Introduction ................................................................................................................................. 1 Post Qualification Training .......................................................................................................... 1 Refresher Training ...................................................................................................................... 1 Deviations from Post Qualification and Refresher Training Requirements................................... 3 Post-qualification and Refresher Training Requirements ............................................................. 4 Appendix C-1, Reactor Operations Inspector.................................................................. 4 Appendix C-2, Reactor Engineering Inspector ................................................................ 4 Appendix C-3, Health Physics Inspector ......................................................................... 5 Appendix C-4, Reactor Security Inspector ...................................................................... 6 Appendix C-5, Research and Test Reactor Inspector ..................................................... 6 Appendix C-6, Emergency Preparedness Inspector ....................................................... 7 Appendix C-7, Fire Protection Inspector ......................................................................... 7 Appendix C-8, Vendor Inspector ..................................................................................... 7 Appendix C-9, Senior Reactor Analyst............................................................................ 7 Appendix C-10, Operator Licensing Examiner ................................................................ 8 Appendix C-11, Security Risk Analyst............................................................................. 9 Appendix C-12, Safety Culture Assessor .......................................................................10 Appendix C-15, Construction Inspector .........................................................................10 Revision History Sheet for IMC 1245, Appendix D-1 ........................................................... Att1-1 Issue Date: 02/18/20 i 1245 Appendix D1

Introduction This appendix consolidates post-qualification and refresher training requirements needed to maintain full inspector qualification for each inspector classification. Unless otherwise noted in this appendix, this training should not be taken until an individual has completed inspector qualification and obtained supervisors approval.

Unless specifically stated in this appendix, new post-qualification training requirements are not applicable to an individual who is qualified before the effective date of the revision to Inspection Manual Chapter (IMC) 1245, Qualification Program for New and Operating Reactor Programs, adding the new requirement. However, previously qualified inspectors should consider expanding their technical knowledge by completing these courses based on previous work experience and planned work activities in specific technical areas. The requirements to maintain full qualification for each inspector classification follow.

Post-Qualification Training

1. As noted in the specific inspector classification, post-qualification training is required to be completed as prescribed in the specific inspector classification below. This training will assist in increasing the depth and breadth of an inspectors skills, thereby increasing inspector performance.
2. Unless specifically permitted in this appendix, post-qualification training shall not be completed until an individual has completed full inspector qualification.

If an individual completes any subsequent inspector classification(s) beyond the initial, full-qualification, the individual shall be required to complete the post qualification training requirements of the new inspector classification in effect at the time of completing the subsequent qualification. For example, if a fully qualified Reactor Operations Inspector (Appendix C1) completed the requirements for Health Physics Inspector (Appendix C3), the individual is required to complete the post qualification requirements for the new inspector classification, Health Physics Inspector, within the time specified by the new inspector classification as required by the revision of this appendix in effect at the time.

3. Although not a requirement, qualified inspectors should consider expanding their technical knowledge by completing other courses listed in the Talent Management System (TMS) based on previous work experience and planned work activities in specific technical areas.
4. Unless otherwise stated, inspectors are required to complete the post qualification training prior to the end of the third calendar year after achieving full qualification. For example, if full qualification was completed in May 2018, the post qualification training is required to be completed before the end of 2021.
5. A fully qualified inspector, who did not complete post qualification training due to reassignment (e.g., an inspector did not complete post qualification training after transferring to headquarters), may participate as a member of a team inspection under the supervision of the team leader. However, this inspector must complete the post qualification training before conducting independent inspection activities.

Refresher Training All inspectors are required to complete refresher training to maintain the overall level of inspector performance.

Issue Date: 02/18/20 1 1245 Appendix D1

1. Qualified inspectors are expected to complete annual refresher training on the Reactor Oversight Process (ROP). The purpose of this refresher training is to improve and maintain consistent implementation of the ROP, address areas of identified deficiencies, and maintain overall level of ROP performance. [C-1]

The process for accomplishing this training will be as follows:

a. During the spring of each year, DRO will solicit input for the development of that years ROP refresher training. Inspectors should use the Feedback Process to submit suggestions.
b. The IMC 1245 Management Steering Group (MSG), consisting of a Division Director/Deputy Director from each region, will determine (1) the topics for the refresher training, (2) the method of training (read, read and sign, inspector seminar session, or other), and (3) the timing of the training.
c. The responsible technical branch in DRO will have the lead to develop the training based on the MSGs selection of ROP refresher topics and the method/approach used to track completion of the training activity e.g. in the Talent Management System (TMS).
d. Regardless of the method of training selected by the IMC 1245 MSG, training material will be made available to all inspectors.
2. Qualified inspectors are expected to complete all required refresher training for their specific inspector classification within the established requalification cycle. Each individual re-qualification cycle will be calculated based on the month of achieving full inspector qualification or, if that is not known, the month in which the current cycle was begun. The requalification cycle will be a full 24 or 36-month period as indicated in the specific technical proficiency qualification journal. Inspectors may complete the required training at any time during that period, up until the end of the calendar year in which the training is required. For example, if the initial qualification/refresher was completed in 2018, the refresher training needs to be completed by the end of 2021 and the next refresher by the end of 2024. In some cases, there may be more than three years between subsequent refresher courses, but normal supervisory oversight and the existing requirement for supervisors to observe inspectors in the field should identify any instances when immediate refresher training may be needed. Approval to extend an inspectors refresher training beyond the established calendar year due date must be approved as a deviation in accordance with the guidance below. Refresher training requirements for the current requalification cycle are considered complete if the inspector completes training courses for another reactor technology.
3. A fully qualified inspector, who does not maintain qualification due to reassignment (e.g., an inspector stops taking refresher training after moving to headquarters), may participate as a member of a team inspection under the supervision of the team leader.

However, this inspector must complete additional training before conducting independent inspection activities. Specifically, the inspector must complete the refresher training stipulated for the applicable inspector classification and any additional training identified by the inspectors supervisor or division director prior to conducting independent inspection activities.

Issue Date: 02/18/20 2 1245 Appendix D1

4. The periodic refresher training requirements were established to maintain inspectors knowledge and proficiency. If an inspector does not complete all refresher training requirements, the supervisor must evaluate the inspectors proficiency to conduct independent inspections. Any inspector deemed proficient, remains qualified to conduct independent inspections while the supervisor seeks a deviation. Any inspector who needs additional training must stop conducting independent inspections until the inspector receives an approved deviation and the supervisor is satisfied that remedial training has been effective.
5. Qualified staff are expected to complete other refresher training as determined by the applicable program office. This training will address areas where overall program implementation has been identified as declining.

Deviations from Post Qualification and Refresher Training Requirements Deviations are needed to extend post qualification and refresher training requirements past the due date. Therefore, these deviations must identify the reasons why the required training cannot be completed on schedule, the bases for concluding that the individual has maintained inspector proficiency, any needed compensatory measures and the plan that will be used to restore the inspector to their original training cycle.

A regional division director can authorize deviations to extend the due date by up to one year without program office approval. Only the program office can authorize deviations that extend a due date beyond one year from the requirements listed in IMC 1245.

Deviation requests can be made via e-mail or memorandum and should be submitted by the immediate supervisor of the qualifying individual to the regional division director or to the Chief, Oversight and Support Branch, in DRO as applicable.

Issue Date: 02/18/20 3 1245 Appendix D1

Post-qualification and Refresher Training Requirements Appendix C-1, Reactor Operations Inspector

1. Post-qualification requirements:

For inspectors fully qualified after the effective date of these courses, attendance at these courses is a post-qualification requirement to be completed prior to the end of the third calendar year after achieving full qualification:

- Root Cause Report Evaluation (G-204) (effective date January 10, 2008)

- Probabilistic Risk Assessment Technology and Regulatory Perspectives (P-111)

(effective date September 2, 2005)

For example, if full qualification was completed in May 2018, the post qualification training is required to be completed before the end of 2021.

- Reactor-specific series training course Operations inspectors must complete the reactor specific series training for their assigned site. If reassigned to a new site after initial qualification, the inspector must complete the reactor specific series training for the new assignment. This training should be completed as soon as feasible after reassignment and must be completed within 24 months of assignment to a new site. [C-2]

2. Refresher training requirements:

- Technology review (i.e. 904 B/P, R-905P, R-906P or R-907P) and simulator refresher (i.e., R-704 B/P, R-705P, R-706P or R-707P) are both required every three-year training cycle. When taking the refresher courses, it is also recommended that the simulator and technology review courses be scheduled as close together as possible.

- If you are qualified to inspect more than one reactor type, you must complete either the boiling-water reactor (BWR) or pressurized-water reactor (PWR) refresher training every three-year training cycle, reflective of the assigned sites.

For example, a region-based C1 inspector qualified in more than one type and assigned to a branch with BWR and PWR sites, should alternate between technologies. A senior resident inspector stationed at a BWR but qualified in more than one type should only take the BWR refresher series.

Appendix C-2, Reactor Engineering Inspector

1. Post-qualification requirements:

For inspectors fully qualified after the effective date of these courses, attendance at these courses is a post-qualification requirement to be completed prior to the end of the third calendar year after achieving full qualification:

- Root Cause Report Evaluation (G-204) (effective date January 10, 2008)

Issue Date: 02/18/20 4 1245 Appendix D1

- Probabilistic Risk Assessment Technology and Regulatory Perspectives (P-111)

(effective date September 2, 2005)

For example, if full qualification was completed in May 2018 the post qualification training is required to be completed before the end of 2021.

For inspectors performing inspections of licensee Power Operated Valve/Motor Operated Valve (POV/MOV) programs, completion of the following courses is a post qualification requirement before conducting inspections of licensee POV/MOV programs per NRC Inspection Procedure (IP) 71111.21N.02, Design-Basis Capability of Power-Operated Valves Under 10 CFR 50.55a Requirements.

- Motor Operated Valve Training Course (effective date October 16, 2019)

- Power Operated Valve Inspector Training Course (effective date October 16, 2019)

2. Refresher training requirements:

- Technology review (i.e. R-904 B/P, R-905P, R-906P or R-907P) is required every three-year cycle. During calendar year 2020, inspectors may take simulator training courses (i.e., R-704 B/P, R-705P, R-706P or R-707P) in lieu of the appropriate technology review course if sufficient course availability is not present.

If you are qualified to inspect more than one reactor type, you must complete either the boiling-water reactor (BWR) or pressurized-water reactor (PWR) refresher training every three-year training cycle.

Appendix C-3, Health Physics Inspector

1. Post-qualification requirements:

All health physics inspectors are required to participate in on-going post-qualification training to maintain and enhance their knowledge and skills. This training should include elements of both continuing and refresher training as defined in IMC 1245-03. Each inspector should annually review with their supervisor post-qualification accomplishments in the past year and goals for the coming year to assure that the intent of IMC 1245-06, Post-Qualification Training, has been met.

2. Refresher training requirements:

At least 36 cumulative hours of training is required every three-year training cycle. This training can be either continuing or refresher training as defined in IMC 1245. This training requirement can be met by completing one or more of the following:

- Instructor-led training courses related to health physics (e.g., H-401 courses)

- Training/instruction in topics relating to the inspectors duties (training can be completed via webinars, Skype, WebEx or similar platforms)

Issue Date: 02/18/20 5 1245 Appendix D1

- Participation in health physics conferences, lectures or workshops

- Commercial or government-sponsored technical training courses related to health physics

- Online training courses related to health physics All continuing or refresher training must be approved by the inspectors Branch Chief.

Appendix C-4, Reactor Security Inspector

1. Post-qualification requirements: None
2. Refresher training requirements:

- Security Counterpart & Technology Refresher (S-402) every three-year training cycle.

- Attend one external or internal security training course or supervisor-approved alternative training course every three-year training cycle to maintain an advanced technical knowledge in security.

If the inspector cannot attend the courses listed above because of circumstances beyond his/her control, an alternative acceptable course may be substituted with the documented permission of the inspectors Branch Chief and the Branch Chief of the Office of Nuclear Security and Incident Response (NSIR) Nuclear Security Oversight Branch.

Appendix C-5, Research and Test Reactor Inspector

1. Post-qualification requirements:

- attending classes beyond the core requirements (e.g. TMS), if needed for oversight mission

- reading relevant RTR license amendments, incident reports, new regulatory requirements, etc.

2. Refresher training requirements:

- attending courses that have been taken previously or refresher courses on the subject matter

- participating in information exchange forums with counterparts (e.g., RTR inspectors, RTR PMs, RTR operator license examiners, other NRC groups, and TRTR)

- performing a joint inspection with another RTR inspector with an emphasis on exchanging good practices and techniques.

Issue Date: 02/18/20 6 1245 Appendix D1

Appendix C-6, Emergency Preparedness Inspector

1. Post-qualification requirements:

- Attendance at courses will be determined by your supervisor and is dependent on your previous work experience and planned inspection activities (e.g., lead emergency preparedness inspector, RAC member).

2. Refresher training requirements:

- Attending courses that have been taken previously or refresher courses on the subject matter

- Supporting other inspection programs or program offices as desired/needed.

Appendix C-7, Fire Protection Inspector

1. Post-qualification requirements:

- Root Cause Report Evaluation (G-204) (effective date January 10, 2008)

- attending classes beyond the core requirements (e.g., see TMS or Appendix D-3, Fire Protection Advanced-Level Training, to IMC 1245)

2. Refresher training requirements:

Suggestions for refresher include but are not limited to the following:

- attending courses that have been taken previously or refresher courses on the subject matter

- assisting in the presentation of fire protection training

- participating in information exchange forums with counterparts (e.g., regional fire protection workshops)

Appendix C-8, Vendor Inspector

1. Post-qualification requirements:

- Vendor Inspector group training conducted at least three times per fiscal year that concentrates on core competencies and lessons learned.

2. Refresher training requirements: None Appendix C-9, Senior Reactor Analyst
1. Post-qualification requirements:

Issue Date: 02/18/20 7 1245 Appendix D1

For analysts fully qualified after the effective date of these courses, attendance at these courses is a post-qualification requirement to be completed prior to the end of the third calendar year after achieving full qualification:

- Accident Consequence Analysis (P-301) (effective date November 24, 2015)

- Bayesian Inference in Risk Assessment Advanced Topics (P-502) (effective date November 24, 2015)

For example, if full qualification was completed in May 2018, the post qualification training is required to be completed before the end of 2021.

2. Refresher training requirements: Either the BWR or PWR refresher training shall be completed in the three-year training cycle. It is recommended that inspector certification for SRAs be alternated between PWR and BWR technologies. When taking the refresher courses, it is also recommended that the simulator and technology review courses be scheduled as close together as possible. Other training needs should be evaluated based on the needs of the individual. For example, although a qualified SRA had previously received training on SAPHIRE, it may be appropriate to retake the course, assuming the SAPHIRE code had changed sufficiently to warrant the need for additional training.

SRAs are encouraged to attend a professional meeting at least once during the three-year training cycle. The meetings may be either NRC or industry sponsored and should address PRA applications or specific aspects of PRA (e.g., human reliability assessment, common cause failure analysis, fault tree/event tree modeling, risk communications, etc.,) that are of interest to the SRA and important for continued development in the SRAs understanding of risk technology.

Appendix C-10, Operator Licensing Examiner

1. Post-qualification requirements: None.
2. Refresher training requirements:

- Technology review (i.e., R-327C, R-904 B/P, R-905P, or R-906P) and simulator refresher (i.e., R-704 B/P, R-705P, or R-706P) are both required every three-year training cycle. When taking the refresher courses, it is also recommended that the simulator and technology review courses be scheduled as close together as possible. The due date will be determined based on the individuals full inspector qualification or Operator Licensing (OL) examiner qualification date, whichever came first. Examiners who are certified on more than one reactor technology, including AP1000, should alternate their attendance among the vendors for which they are certified during successive refresher training periods.

- To maintain their examination skills, OL examiners shall complete at least one of the following options every three-year training cycle:

(1) Complete a refresher training class presented by the NRR OL program office in conjunction with the national operator licensing examiners training conference, Issue Date: 02/18/20 8 1245 Appendix D1

(2) Complete an examination techniques refresher course scheduled by special arrangement with the NRR OL program office, or (3) Complete either the written examination or the operating test techniques portion of the Operating Examination Techniques course (G-107).

- Attend every national operator licensing examiners training conference and other special continuing training programs presented by the NRR OL program office or receive the training related information that was presented via alternate means.

- Administer at least one complete operating test every calendar year. Any examiner who fails to administer an operating test must be assessed (following a process similar to the certification test described in the General Requirements section of IMC 1245, Appendix C-10, Operator Licensing (OL) Examiner Technical Proficiency Training and Qualification Journal) by a certified chief examiner (preferably the regional OL Branch Chief). Both the chief examiner and the examiner being audited should sign Form ES-303-1 as the Examiner of Record. The chief examiner should verify satisfactory administration of a complete operating test on any reactor technology in which the examiner has maintained technical proficiency (by attending the required refresher training discussed above). Any examiner who has been inactive for more than 24 months shall also complete some form of examination techniques refresher training, as discussed above, to reactivate their OL examiner certification.

Note:

Examiners assigned to the OL program office and certified regional OL Branch Chiefs are generally exempt from the aforementioned proficiency and observation requirements by virtue of their day-to-day involvement in program development and oversight, including the administration of operating test audits and teaching the operating test portion of the Operating Examination Techniques course (G-107). The Chief of the NRR Operator Licensing and Human Factors Branch will determine the need for proficiency testing and observations on a case-by-case basis.

Appendix C-11, Security Risk Analyst

1. Post-qualification requirements: None.
2. Refresher training requirements:

- Security Counterpart & Technology Refresher (S-402) every three-year training cycle

- Once every three-year training cycle, both the technology review (R-904B or R-904P) refresher and simulator/emergency operating procedures (R-704B or R-704P) refresher are required for at least one reactor type in which an inspector is qualified. If the individual is qualified on more than one reactor type, the inspector should alternate between PWR and BWR technologies.

Issue Date: 02/18/20 9 1245 Appendix D1

If the analyst cannot attend one or more of the required courses listed above because of circumstances beyond his/her control, an alternative acceptable course may be substituted with the documented permission of the inspectors Branch Chief and the Branch Chief of the NSIR Nuclear Security Oversight and Support Branch.

Appendix C-12, Safety Culture Assessor

1. Post-qualification requirements: None.
2. Refresher training requirements:

Complete the following training every three-year training cycle:

- focus group refresher training or participation in an inspection such as one under IP 95003, preferably one using focus groups Appendix C-15, Construction Inspector

1. Post-qualification requirements:

For inspectors fully qualified after the effective date of these courses, attendance at one of these courses is a post-qualification requirement to be completed prior to the end of the third calendar year after achieving full qualification. Only one course is required.

- Civil/Structural Functional Area: Civil/Structural Codes and Inspection Course (effective date December 7, 2009)

- Mechanical Functional Area: Mechanical Codes and Inspection Course (effective date December 7, 2009)

- Electrical Functional Area: Electrical Codes and Inspection Course (Including Digital I&C and fiber optics) (effective date December 7, 2009)

For example, if full qualification was completed in May 2018 the post qualification training is required to be completed before the end of 2021.

2. Refresher training requirements:

- attending classes beyond the core requirements (e.g. TMS)

END Issue Date: 02/18/20 10 1245 Appendix D1

Revision History Sheet for IMC 1245, Appendix D-1 Attachment 1 Commitment Accession Description of Change Description of Comment Tracking Number Training Resolution and Number Issue Date Required and Closed Feedback Change Notice Completion Form Accession Date Number (Pre-Decisional, Non-Public Information)

C-1 ML041950500 IMC 1245 is being revised to provide clarification to Section None N/A

Reference:

6/29/04 05.04, Maintaining Qualification, regarding the timing of refresher Davis-Besse CN 04-019 training. In addition, a requirement for annual refresher training Lessons on the Reactor Oversight Process (ROP) was added to Section Learned 06.01 to improve and maintain consistent implementation of the Task Force, ROP, address areas of identified deficiencies, and maintain Recommend overall level of ROP performance.

ation 3.3.4.6 C-2 ML052580014 IMC 1245 has been revised to incorporate several changes None N/A

Reference:

9/02/05 including: adding responsibility sections for the IMC 1245 OIG-05-A-06 CN 05-024 Management Steering Group and the IMC 1245 Working Group; Recommend permitting a 3 month extension to the 24 month requirement for ation 7 completion of inspector qualification for individuals in the Nuclear (ML0525202 Safety Professional Development Program; and adding a

04) requirement for vendor specific training for operations inspectors who are assigned to a different vendor design N/A ML090360633 Makes Maintaining Qualifications, a separate appendix, None N/A 07/08/09 updates inspector titles, adds two new training standards (C-7 CN-09 017 and C-11), and consolidates post-qualification and refresher training requirements needed to maintain full inspector N/A ML11073A004 qualification This revisionfor each inspector clarifies refresher classification.

training requirements, moves None ML11321A232 12/29/11 refresher training guidance from IMC 1245 into Appendix D-1, CN-11-044 broadens the scope of deviations to include late completion of post-qualification training, adds post-qualification training for vendor inspectors, and authorizes the supervisor (with concurrent IOLB/NRR approval) to approve alternate refresher training for Health Physics inspectors.

Issue Date: 02/18/20 Att1-1 1245 Appendix D1

Commitme Accession Description of Change Description of Comment nt Tracking Number Training Resolution and Number Issue Date Required and Closed Feedback Change Notice Completion Form Accession Date Number (Pre-Decisional, Non-Public Information)

N/A ML12243A502 This revision adds requalification requirements for inspectors who None N/A 12/19/12 have not maintained qualification due to reassignment, broadens CN-12-029 the scope of deviations to include post-qualification requirements, and authorizes a regional division director to approve deviations that extend deadlines by up to six months without program office approval.

N/A ML13269A122 This revision modifies refresher requirements for security None ML13269A124 10/23/13 inspectors that are qualified or qualify under Appendix C-4 and CN13-026 clarifies language and refresher requirements for Security Risk Analysts that are qualified or qualify under Appendix C-11 N/A ML15177A324 This revision updates IMC format and the location of deviation None ML15195A195 11/24/15 guidance for refresher training. This revision also revises the Closed FBF:

CN 15-026 following qualification standards, modifies the process to approve 1245D1-2001 alternative refresher training for health physics inspectors (C-3), ML15207A052 adds two courses (P-301 and P-502) to post qualification for SRAs (C-9), and adds AP1000 as a reactor technology for examiners (C-10) refresher training. To close the feedback form, this Revision History summary documents that HRTD is adding training topics (recommended by the Fort Calhoun lessons learned team) to the Technology Review Courses (R-904, R-905, and R-906).

N/A ML17072A353 This revision adds requirements for Appendix C-15, Construction None ML17089A365 08/24/17 Inspector CN 17-015 Issue Date: 02/18/20 Att1-2 1245 Appendix D1

Commitment Accession Description of Change Description Comment Tracking Number of Training Resolution and Number Issue Date Required Closed Feedback Change Notice and Form Accession Completion Number (Pre-Date Decisional, Non-Public Information)

N/A ML18047A201 This revision gives additional time and flexibility for C1, C2, C3, C9, ML18065A659 06/07/18 and C15 qualified individuals to complete their post-qualification CN 18-014 requirements, eliminates the need for SRAs to take P-501 as refresher training, and updates the contact for deviations from the Operator Licensing and Training Branch to the ROP Support and Generic Communications Branch.

ML19324C998 This revision expanded the time allowed for training deviation None ML19324C996 02/18/20 requests that can be granted for all inspectors by a Regional CN 20-008 division director from six months to one year. Added the expectation that when training waivers are provided, inspectors should return to the original training schedule.

Based upon feedback from program offices, a number of inspector refresher training programs were updated to remove references to out of date courses and expectations. The most far reaching change involved reactor engineering inspectors who will now be required to attend the Technology review courses (i.e., R-327C, R-904 B/P, R-905P, or R-906P) every three-year cycle in lieu of simulator courses to ensure they receive training on the following engineering related subjects:

  • 50.59 and design basis training that was developed in response to the Fort Calhoun and San Onofre lessons learned reports.

Issue Date: 02/18/20 Att1-3 1245 Appendix D1

Commitment Accession Description of Change Description Comment Resolution Tracking Number of Training and Closed Number Issue Date Required Feedback Form Change Notice and Accession Number Completion (Pre-Decisional, Date Non-Public Information)

This change added new training requirements for inspectors who are performing POV/MOV inspection activities.

This revision removed references to discontinued courses and manuals such as the NRC course catalog and inserted references to recently introduced applications such as TMS, and updated titles to reflect organizational changes. e.g. changed DIRS to DRO.

This change also reformatted the layout of a number of inspector training program descriptions, so they appear more similar.

Issue Date: 02/18/20 Att1-4 1245 Appendix D1

Retrieved from "https://kanterella.com/w/index.php?title=ML19324C998&oldid=2515999"