ML19312D990

From kanterella
Jump to navigation Jump to search
Certificate of Compliance 9094,Revision 4,for Model Cnsi 14-195-H
ML19312D990
Person / Time
Site: 07109094
Issue date: 05/20/1980
From: Macdonald C
NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS)
To:
Shared Package
ML19312D987 List:
References
NUDOCS 8006030035
Download: ML19312D990 (2)


Text

_

O Form NRC418 U.S. NUCLE AR REGULATORY COMMISSION CERTIFICATE QF COMPLIANCE 10 c R 71 For Radioactive Materials Packages 1.lai Certificate Number 1.(b) Revision No.

1.(c) Package Identification No.

1.(d) Pages No. 1.(e) Total No. Pages 9094 4

USA /9094/A 1

2

2. PRE AMBLE 2 (a)

This certificate is issued to satisfy Sections 173.393a.173.394.173.395, and 173.396 of the Department of Transportation Hazardous Materials Regulations (49 CFR 170189 and 14 CFR 103) and Sections 146-19-10a and 146-19-100 of the Cepartment of Transportation Dangerous Cargoes Regulations (46 CFR 146-143), as amended.

2.(b)

The packaging arid cantents described in item 5 below, meets the safety standards set forth in Subpart C of Title 10. Code of Federal Regulations, Part 71, Packaging of Radioactive Materials for Transport and Transportation of Radioactive Material Under Certain Conditions."

2.f c)

This certificate does not relieve the consignor from corroliance with any recuirement of the regulations of the U.S. Departerent of Transportation or other applicable regulatory agencies, incfuding the government of any country through or into which the nackage will be transported.

3. This certificate is issued on the basis of a safety analysis report of the package design or application-3.(a)

Prepared by (Name and address):

3.(b)

Title and identification of report or application:

Chem-Nuclear Systems, Inc.

Chem-Nuclear Systems, Inc. application P.O. Box 1866 dated March 31, 1980.

Bellevue, WA 98009 3.(ci ooemet No?l-9094 4 CONDITIONS This certificate is conditional upon the fulfilling of the requirements of Subpert 0 of 10 CFR 71, as applicable, and the conditions specified in item 5 below.

5. Description of Packaging and Authorized Contents, Model Number, Fissile Class. Other Conditions, and

References:

(a) Packaging 4

(1) Model No.: CNS 14-195-H l

(2) Description A steel encased lead shielded cask for low specific activity radioactive material. The cask is a right circular cylinder 83-1/8-inch diameter by 89-7/8-inch with a 77-inch diameter by 80-l/8-inch cavity. Lead shielding is 2-3/16-inch thick, and is encased in an outer steel shell 3/4-inch thick and inner steel shell 1/8-inch thick. Positive closure of the silicone rubber-sealed lid is provided by twelve,1-1/4-inch diameter cap screws.

A secondary lid with a Neoprene seal uses eighteen, 3/4-10 UNC bolts for closure. The cask is welded to a 96-inch square based plate, has two lifting trunnions, three lid lift rings and one secondary lid lifting ring.

Package gross weight is 56,500 pounds.

(3) Drawing The packaging is fabricated in accordance with Chem-Nuclear Systems, Inc.

Drawing No. 1-189-101, Sheet 1 of 1, Rev. A-F.

'l 80060300 3 8

Page 2 - Certificate No. 9094 - Revision No. 4 - Docket No. 71-9094 5.

(b) Contents (1) Type and form of material (i) Process solids, either dewatered, solid or solidified in secondary containers, meeting the requirements for low specific activity radio-active material, or (ii) Solid reactor components in secondary containers, as required that meet the requirements for low specific activity radioactive material.

(2) Maximum quantity of material per package Greater than Type A quantities of radioactive material with the weight of the contents, secondary containers and shoring not exceeding 17,700 pounds.

6.

Shoring shall be placed between secondary containers (or activated components) and the cask cavity to prevent movement during normal conditions of transport.

7.

The lid lifting lugs shall not be used for lifting the cask and shall be covered in transit.

3.

Prior to each shipment the lid gaskets shall be inspected.

This gaskets shall be replaced if inspection shows any defects or every twelve (12) months, whichever occurs first.

9.

Packagings fabricated (10 CFR 371.53(c)) after March 31, 1980, shall be constructed of A-516, Grade 70 carbon steel A-36 carbon steel.

10. The package authorized by this certificate shall be transported on a motor vehicle, railroad car, aircraft, inland water craft, or hold or deck of a seagoing vessel assigned for sole use of the licensee.
11. The package authorized by this certificate is hereby approved for use under the general 1.icense provisions of 10 CFR 571.12 (b).
12. Expiration date: May 31, 1985.

REFERENCE l

Chem-Nuclear Systems, Inc. application dated March 31, 1980.

l FOR THE U.S. NUCLEAR REGULATORY COMMISSION

&cA(L Charles E. MacDonald, Chief Transportation -Certification Branch Divisicn of Fuel Cycle and Material Safety-MAY 2 01930 Date:

i

- - -..