ML19309G732
| ML19309G732 | |
| Person / Time | |
|---|---|
| Site: | Hatch  |
| Issue date: | 05/01/1980 |
| From: | Widner W GEORGIA POWER CO. |
| To: | James O'Reilly NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION II) |
| References | |
| IEB-80-02, IEB-80-2, NUDOCS 8005070465 | |
| Download: ML19309G732 (1) | |
Text
271*,.27,' $~i" 8 0 0 5 0 7 0 9'65 Q mu co:e en ms cm c,na so2c2 t% -r, u 5: M c60 h
May 1, 1980 Georgia Power power ceneration Department United States Nuclear Regulatory Commission Office of Inspection and Enforcement
REFERENCE:
Region II - Suite 3100 RII - JPO 101 Marietta Street, NW 50-321/50-366 Atlanta, Georgia 30303 I&E Bulletin 80-02 ATTENTION:
Mr. James P. O'Reilly Gentlemen:
The Georgia Power Company hereby submits the following revision to our letter dated April 16, 1980, which responded to I&E Bulletin 80-02,
" Inadequate Quality Assurance For Nuclear Supplied Equipment".
Revised Response to Question la Reactor feedwater spargers and thermal sleeves manufactured by Marvin Engineering Company are currently installed at E. I. Hatch, Unit 1.
Subject spargers and thermal sleeves were supplied by its NSSS supplier, General Electric Company (GE), San Jose, California.
Unit 2 feedwater spargers were not manufactured by Marvin Engineering Company.
All subsequent references to Unit 2 feedwater spargers and thermal sleeves should be disregarded. A re-examination of the Unit 2 feedwater sparger documentation package, after receiving comments from GE, indicated that the spargers were not, in fact, fabricated by Marvin Engineering.
We regret this oversight.
If you have any questions in regards to this information revision, please contact my office.
Sincerely yours, C tebJ g
[j
/, v W. A. Widner Vice President and General Manager Nuclear Generation JAE/mb xc: Director of the Office of Inspection and Enforcement Director of the Division of Operating Reactors, Office of Nuclear Reactor Regulation /
0