ML19256D168
| ML19256D168 | |
| Person / Time | |
|---|---|
| Site: | Crane  |
| Issue date: | 10/28/1977 |
| From: | NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION I) |
| To: | |
| Shared Package | |
| ML19256D162 | List: |
| References | |
| 50-289-77-32, NUDOCS 7910170667 | |
| Download: ML19256D168 (1) | |
Text
.. _ _. -
es v
License No. DPR-50 APPENDIX A NOTICE OF VIOLATION Based on the results of an NRC inspection conducted on October 11-12, i
1977, it appears that one of your activities was not conducted in full compliance with the conditions of your NRC Facility License No. DPR-50 as indicated below.
This item is categorized as an Infraction.
Technical Specification 4.7.2.1 states "Whenever the control rod drive patch panel is locked (after inspection, test, reprogranining, or main-tenance) each control rod drive mechanism shall be selected from the i
control room and exercised by a movement of two inches or less to verify that the proper rod has responded as shown on the unit computer printout l
of the rod or on the input to the computer for that rod."
Contrary to the above, on May 9,1977, control rods were moved more than i
i two inches (up to 10.7 inches) during the perfonnance of procedure 1301-9.2, Control Rod Program - Special Check, that is used to meet the require-ments of Technical Specification 4.7.2.
3 i
.v f
I.
t 1446 293 4
I t
N 4
7910170
_