ML19249E610
| ML19249E610 | |
| Person / Time | |
|---|---|
| Site: | 07106406 |
| Issue date: | 09/14/1979 |
| From: | Macdonald C NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS) |
| To: | |
| Shared Package | |
| ML19249E603 | List: |
| References | |
| NUDOCS 7910020041 | |
| Download: ML19249E610 (4) | |
Text
--
Form NRC418 U.S. NUCLEAR REGULATORY COMMISSloN CERTIFICATE OF COMPLIANCE
,g CFR 71 For Radioactive Materials Packages 1.tal Certificate Number 1.(b) Revision No.
1.fel Package Identification No.
..(d ) Pages No. 1.le) Total No. Pages 6406 2
USA /6406/AF 1
4
- 2. PRE AMBs.E 2.(a)
This certificate is issued to satisfy Sectens 173.393a.173.394,173.395, and 173.396 of the Deoartment of Transportation Hazardous Materials Regulations (49 CFR 170-189 and 14 CFR 103) and Sections 146--19-10a and 146-19-100 af the Department of Transportation Dangerous Cargoes Regulations (46 CFR 146-149), as amended.
2.(b)
The packaging and contents described in item 5 below, rneets the safety standards set forth in Suboart C of Titte 10. Code of Federal Regulations, Part 71 " Packaging of Raficactive Materials for Transport and Transportation of Radioactive Material Under Cartain Conditions."
2.(c)
This certificate does not relieve the consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies, including the government of any country through or into which the package will be transported.
- 3. This certificate is issued on the basis of a safety analysis report of the package design or application-3.(a)
Prepared by (Name and address):
3.tb)
Title and identification of report or application:
U.S. Department of Energy U.S. Energy Research and Development Division of Naval Reactors Administration Application dated Washington, D.C.
20545 July 19,1977, as supplemented.
3.lc)
Docket No.71-6406 4 CONDITIONS This certificate is conditional upon the fulfilling of the requirements of Suboart O of 10 CFR 71, as applicable. and the conditions specified in item 5 below.
- 5. Description of Packagsng and Authorized Contents, Model Number, Fissile Class, Other Conditions, and
References:
(a) Packaging (1) Model No.: None specified (2) Description Specific packaging is not required. Safety is independent of
\\
packaging.
(b) Contents (1) Type and form of material Unirradiated fuel assemblies of the following types:
(i) S5G Fuel Experiment Assembly (FEA) in the FEA shipping container.
(ii) S5G Double Fuel Experiment Assembly (DFEA) in the DFEA shipping container.
(iii) AlW-3 Removable Uninstrumented Subassembly (RUS) in the Model 25.0 shipping container.
(iv) AlW-3 Prototype "A" Module or AlW-3 Shipboard "A" Module in the Model 2.7/3.6 shipping container.
l0'2 isu 79100200 9
r-uo
Page 2 - Certificate No. 6406 - Revision No. 2 - Occket No. 71-6406 (b) Contents (Continued)
(v) Rodded instrumented SIC fuel module in the Model 7481E12 shipping container.
(vi) SIC fuel module or SIC peripheral assenbly in the SlC bird cage shipping container.
(vii) SlW-3 Removable Subassembly (RSA) in the SlW RSA/ Metal Box.
(viii) 55W-2 Removable Subassenbly (RSA) in the S5W RSA/ Bird Cage.
(ix) S5W-R2/R3 or S5W-2 module in the S5W New Module Container.
(x) AlW-2/R2 cluster or half cluster in the Model 658C shipping container.
(xi) S3G-2A/2B fuel module in the Model 7481E12 or Model 9SK218 shipping container.
(xii) 02W rodded fuel cell or unrodded corner type D2W fuel module in a model 658HlAB shipping and storage container, Rodded type fuel module shall have a control rod and control rod holddown device installed.
(xiii)
S7G unit cell or reactor cell assembly in a model 658ElAB shipping and storage container, with shipping clamp installed.
(xiv)
Advanced Test Core (ATC) welded fuel cluster or ATC cage assembly fuel cluster or ATC cage assembly fuel cluster in a model 660B1/
660C1 container.
(xv)
DIG fuel module in a model 572Al or 572B1 shipping container and OlG Removable Fuel Assembly (RFA) in a Model 573Al or 573B1 shipping container. A control rod and control rod holddown s
device need not be installed in the DIG fuel module.
(xvi)
DIG Removable Fuel Assembly (RFA) in a model 573Al or 573B1 shipping container.
(xvii)
PWR Core 1 (Seed 2, 3 or 4) unrodded fuel assembly or PWR Core 2 (Seed 1 or 2) unrodded fuel assembly, in unspecified shipping containers.
(xviii)
PWR Core 1 (Seed 2, 3 or 4) unrodded fuel subassenbly or PWR Core 2 (Seed 1l or 2) unrodded fuel subassembly, in unspecified shipping containers.
(xix)
S8G rodded fuel cell in unspecified shipping container with control rod holddown device installed.
(xx)
S5G type unit cell in a 658E1 AB shipping container, fbb2
[
.e e
m.g
Page 3 - Certificate No. 6406 - Revision No. 2 - Docket No. 71-6406 (xxi) AlW-3 Prototype Peripheral Subassmbly or AlW-3 Prototype Center Subassembly in the Model 2.7/3.6 shipping container.
'(2) Maximum quantity of material per package (i) One fuel assembly as described in 5(b)(1)(i), 5(b)(1)(ii),
5(b)(1)(iii),5(b)(1)(iv),5(b)(1)(v),5(b)(1)(vi),
5(b)(1)(vii),5(b)(1)(viii),5(b)(1)(ix),5(b)(1)(x),
5(b)(1)(xi),5(b)(1)(xii),5(b)(1)(xiii),5(b)(1)(xiv),
5(b)(1)(xvi),5(b)(1)(xvii),5(b)(1)(xviii),5(b)(1)(xix) or 5(b)(1)(xx).
(ii) Two fuel assemblies as described in 5(b)(1)(xv).
(iii) Three fuel assemblies as described in 5(b)(1)(xxi).
(c) Fissile Class III Maximum number of packages per shipment:
(1) For the contents described in 5(b)(1)(ii),5(b)(1)(iv),5(b)(1)(vi),5(b)(1)(xi),
5(b)(1)(xii), 5(b)(1)(xiii), 5(b)(1)(xiv), 5(b)(1)(xv),
5(b)(1)(xvii), 5(b)(1)(xix), 5(b)(1)(xx) or 5(b)(1)(xxi) and limited in 5(b)(2)(i), 5(b)(2)(ii) and 5(b)(2)(iii) 1 (one)
(2) For the contents described in 5(b)(1)(iii),5(b)(1)(v),5(b)(1)(ix), 5(b)(1)(x)or 5(b)(1)(xviii) and limited in 5(b)(2)(i).
2 (two)
(3) For the contents described in 5(b)(1)(i) and 5(b)(1)(viii) and limited in 5(b)(2)(i).
3 (three)
(4) For the contents described in
\\
5(b)(1)(vii) and limited in 5(b)(2)(i).
4 (four)
(5) For the contents described in 5(b)(1)(xvi) and limited in 5(b)(2)(i).
8 (eight) 6.
Commingling of packages for Fissile Class III shipnent is authorized provided that the sum of the ratios of the number of packages of an individual type to be shipped to the maximum allowable number of packages of that type per shipment does not exceed unity.
7.
Expiration date: July Jil,1983 1C52 1
Page 4 - Certificate No. 6406 - Revision No. 2 - Docket No. 71-6406 REFERENCES U.S. Energy Research and Development Administration application dated July 19, 1977.
Supplements: Department of Energy letters G#5868; dated January 4,1978, with enclosures, and G #6291; dated July 13, 1979.
FOR THE U.S. NUCLEAR REGULATORY COMMISSION Charles E. MacDonald, Chief /
Transportation Certification Branch Division of Fuel Cycle and Material Safety SEP 141979 Date;
\\
i o a', 7 r
. _ _ _