ML19241B513
| ML19241B513 | |
| Person / Time | |
|---|---|
| Site: | 07100102 |
| Issue date: | 06/12/1979 |
| From: | Macdonald C NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS) |
| To: | Dicharry R SOURCE PRODUCTION & EQUIPMENT CO., INC. |
| References | |
| NUDOCS 7907180743 | |
| Download: ML19241B513 (12) | |
Text
_
pn nEco o
UNITED STATES e
[ '"
.n r j
NUCLEAR REGULATORY COMMISSION W ASHINGTON, D. C. 20555
. 'g ~
%,'S
/
v dl#1121979 FCTR: RHO 71-0102 Source Production & Equipment Company, Inc.
ATTN: Mr. R. F. Dicharry 625 0xley Street Kenner, LA 70062 Gentlemen:
The enclosure to our letter of June 6,1979, to the attention of Mr. R. F. Dicharry, may have inadvertently been omitted.
Enclosed is a copy of the Acceptance Criteria that should 1 ave accompanied the June 6, 1979 letter.
Sincerely, f
f' Charles E. MacDonald, Chief Transportation Branch Division of Fuel Cycle and Material Safety, NMSS
Enclosure:
Acceptance Criteria k
I a-7907180 W 3 c 463 234
i
\\
t t
10 CFR 71 - APPENDI, ACCEPTANCE CRITERIA - TRANSPORTATION PACKAGES FOR NORMAL /SPECIAL FCaM RADI0 ACTIVE MATERIAL I.
Orcanization 1.
Provide a statement that the responsibility for the QA program is retained and exercired by the applicant.
2.
Identify and describe the QA/QC functions performed by the applicant's QA organization or dele' gated to otho organizations proeiding controls to assure appropriate elements of =ppendix E will be implemented.
3.
Provide a current organizational chart that identifies the organizatio il elements which function under the control of the QA program.
4.
identify and describe the responsibilities of each job function shown on the organization chart.
5.
Describe the duties and qualificati ns of the individual who retains overall authority and responsibility for the QA program.
6.
Provide a statement that designated QA individual: have the responsibility and authority, delineated in writing, to stop unsatisfactory work and control further processing, delivery, or installation of nonconforming material.
II.
Quality Assurance Procram 1.
Provide a statement that management (i.e., above or cutside the QA organization) regularly assesses the scope, status, implementation, and effectiveness of the QA program to assure that the program is adequate and complies with iO CFR Part 71, Appendix E criteria.
2.
Provide a statement that crovisions are established to control the distribution of the QA manuals and rev sions thereto.
i n, -
_2
~
3.
Provide a statement that provisions are established for communicating to all responsible organizations and individuals that quality policies, QA manuals, and procedures are mandatory requirements which must be implemented and enforced.
4.
IC2ntify thu safety-related systems, structures and components contimiled by the QA program.
5.
Provide a statement that provisions are established for the resolution of disputes involving quality, arising from a difference f ooinion between QA/QC personnel and other department (engineering, procurement, manufacturing, etc.) personnel.
6.
Drovide a statement that an indoctrinaticn and training program is established such that:
(1) Personnel responsible for performing quality-related activities are instructed as to the purpose, scope, and implementation of the QA manuals, instructions, and procedures.
(2) Personnel performing quality-affecting activities are trained and qualified in the principles and techniques of the activity being performed.
(3) The scope, the objective, and the method of implementing the indoctrination and training program are documented.
(4) Proficiency of personnel performing quality-affecting activities is maintained by retraining, reexamining, and/or recerti fying.
7.
Provide a statement that quality-related activities are performed with specified equipment under suitable environmental conditions, and prerequisites have been satisfied prior to inspection and test.
III. Desicn Control 1.
Provide a statement that measures are established to carry out des '.
activities in a planned, controlled, and orderly manner.
2.
Provide a statement that measures are established to correctly translate the applicable regulatory requirements and design bases into specifica-tions, dr.1wi ngs, wri tten ;rccedures, and ins tructions.
3.
Provice a statement that quality standards are scecified in the desian cocuments, and deviations and cnanges from tnese quality standards are controlled.
[t ; ' d L J 0(
t7 n
. 4.
Provide a.tatement that designs are reviewed to assure that (1) design characteristics can be controlled, inspected and tested and (2) inspection and test criteria are identified.
5.
Provide a statement that proper selection and accomplishment of design verification or checking processes such as by design reviews, alternate calculations, or qualification testing are performed.
When a test program is used to verify the adequacy of a design, a qualification test of a orototype unit under design conditions should be used.
6.
Provide a statement that individuals or groups responsible for design veritication are other than the original designer and the designer's immediate supervisor.
7.
Provide a statement that design and specification changes are subject to the same design controls and approvals that were applicable to the original design unless the licensee designates another qualified responsible organization.
8.
Provide a statement that the positions or groups responsible for design reviews and other design verification activities and their authority and responsibility are identified and controlled by written procedures.
i IV.
Procurement Document Control 1.
Provide a statement that procedures are established that clearly delineate tne sequence of actions to be accomplished in the prepara-tion, review, approval, and control of procurement documents.
2.
Provide a statement that procurement documents identify the applicable 10 CFR Part 71, Appendix E requirements which must be complied with and described in the supplier's QA program.
3.
Pr'; vide a statement that procurement documents contain or reference tra design basis technical requirements including the applicable regulatory requirement 3, material and component identification requirements, drawings, saecifications, codes and industrial standards, test and inspection requirements, and special process instructions.
4.
Provide a statement that prccurt.nent documents identify tne documen-tation (e.g., crawings, scecifications, procedures, inspection and fabrication alans, inscec*. ion and test records, personnel and procecures cualificatiors, and cnemical and physical test results -f material) to be prepared, maintained, and submitted to the curchaser for review and approval.
A/7 a
ItUJ LJ/
5.
Provide a statement that procurement documents identify those records to be retained, controlled, and maintained by the supplier, and those delivered to the purchaser prior to use or installation of the hardware.
6.
Provide a statement that procurement docun:ents contain the procuring agency's right of access to sJpplier's faci'ities and records for source inspection and audit.
7.
Provide a statement that changes and revisions to procurement documents are subject to at least the same review and approval as the original document.
V.
Instructions, Procedures, and Drawings 1.
Provide a statement that activities affecting quality are prescribed and accomplished in accordance with documented instructions, procedures, or drawings.
2.
Provide a statement that provisions are establish'ed which clearly delineate the sequence of actions to be accomplished in the prepara-tion, review, approval, and control of instructions, procedures, and drawings.
3.
Provide a statement that the QA organization reviews and concurs with inspection plans; test, calibration, and special process procedures; drawings and specifications; and changes thereto or acceptable alternatives are described.
VI.
Document Control 1.
Provide a statement that the review, approval, and issue of documents and changes thereto, prior to release, are procedurally controlled to assure they are adequate and the quality requirements are stated.
2.
Provide a statement that changes to documents are reviewed and approved by the same organizations that performed the original review and approval or by other qualified r esponsible organizations delegatad by the applicant.
3.
Provide a statement that approved changes are included in instructions, procedures drawings, and other documents prior to implementation of the change.
4.
Provide a statement that documents are available at the location where the activity will be performe prior to commencing the work.
tua c
5.
Provide a statement that a master list, or equivalent, is established to identify the current revision number of instructions, procedures, specifications, drawings, and procurement documents.
VII. Control of Purchased Materials, Par *s and Components 1.
Provide a statement that qualified personnel evaluate the supplier's capability to provide acceptable quality services and products.
2.
Provide a statement that the evaluation of suppliers is based on one or more of the followi g:
(1) The supplier's capability to comply with the elements of Appendix E to 10 CFR Part 71 that are applicable to the type of material, equipment, or service being procured.
(2) A review of previous records and performance of suppliers who have provided similar articles of the type being orocured.
(3) A survey of the supplier's facilities and QA program to determine his capability to supply a product which meets the design, manufacturing, and quality requirements.
3.
Provide a statement that the results of supplier evaluations are documented and filed.
4.
Provide a statement that surveillance, if required, of suppliers during fabrication, inspection, testing, and shipment of materials, equipment and components is planned and performed in accordance with written procedures to assure conformance to the purchase order requirements.
5.
Provide a statement that the supplier furnishes the following records as a minimum to the purchaser:
(1) Documentation that identifies the purchased material or equipment and the specific procurement requirements (e.g., codes, standards, and specifications) met by the items.
(2) Cocumentation that identifies any procurement requirements which have not been met together with a description of tnose nonconformancas disposi ioned " accept as is" or " repair."
t 6.
Provide a statement that receiving inspection of the supplier-furnisned material, equipment, and services is performed to assure:
tUJ LJ
. (1) The material, component, or equipment is properly identified and corresponds with the identification on receiving documentation.
(2) Material, components, equipments, and acceptance records at e inspected and judged acceptable in accordance with predetermined inspection instructions, prior to installation or use.
(3) Insrection records or certificates of conformance attesting to the acceptance of material and components are available prior to installation or use.
(4) Items accepted and released are identified as to their inspection status prior to forwarding them to a controlled storage area or releasi'g them for further work.
V '. i i.
Identification and Control of Materiais, Parts, and Comconents 1.
Provide a statement that procedures are established to identify and control r.'aterials, parts, and components including partially fabricated j
subascembiies.
2.
?'
ide a statement that the identification and control procedures as.ure that identification is maintained either on the item or on records traceable to the item 'o preclude use of incorrect or l
defective items.
3.
Provide a statement that identification of materials and parts important to the function of safety-related systems and components can be traced to the appropriate documentation such as drawings, specifications, purchase orders, manufacturing and inspection documents, deviation reports, and physical and chemical mill test reports.
4.
Provide a statement that the location and the method of identification do not affecu the fit, function, or quality of the item beinn identified.
5.
Provide a statement tnat correct identification of materials, parts, and components is verified and documented prior to release for fabrication, 2 ssembling and installation.
IX.
Control of Scecial Pt, cesses 1.
Provide a statement chat special processes such as welding, heat trea ting, nondestruct;ve testing, and cleaning are procedurally controlled.
463 2 J. 0
. 2.
Provide a statement that procedures, equipment, and personnel connected with special processes are qualified in accordance with applicable codes, standards, and specifications.
3.
Provide a statement that qualification records of procedures, equipment, and personnel associated with special processes are established, filed, and kept current.
X.
Inspection 1.
Provide a statement that an inspection program which verifies conformance of quality-affecting activities with requirements is establis.1ed, documented, and accomplished in accordance with written ana controlled procedures.
2.
Provide a statement that inspection persorinel are indeoendent from the individuals performing the activity being inspected.
3.
Provide a statement that inspectors are qualified in accordance with applic le codes, standards, and company training programs; and their qualificatio.ns and certifications are kept current.
4.
Provide a statement that modifications, repairs, and replacements are inspected in accordance with the original design and inspection requirements or acceptable alternatives.
5.
Provide a statement that provisions are established that identify mandatory inspection hold points for witness by an inspector.
XI.
Test Control 1.
Provide a statement that a test program to demonstrate that the item or component will perform satisfactorily in service is established, documented, and accomplished in accordance with written controlled procedures.
2.
Provide a statement that modifications, repairs, and replacements are tested in accordance with the original design and testing requirements or acceptable alternatives.
3.
Provide a statement that test results are documented, evaluated, and v.eir acceptability determined by a qualified, resoonsible individual or group.
ij47 9'
fUJ (i N
XII. Control of Measurino and Test Equioment 1.
Provide a statement that measuring and test instruments are calibrated at specified intervals based on the required accuracy, purpose, degree of usage, stability characteristics, and other conditions affecting the measurement.
2.
Provide a statement that measuring and test equipment is identified and traceable to the calibration test data.
3.
Provide a statement that measures are taken and documented to determine the validity of previous inspections performed when measuring and test equipment is found to be out of calibration.
4.
Provide a statement that refereace and transfer standards are traceable to nationally recognized standards; or, where national standards e not exist, provisions are established to document the basis for calibration.
XIII. Handlino, Storace, and Shipoino 1.
Provide a statement that special handling, preservation, storaga, cleaning, packaging, and shipping requirements are estcblished and accomol,shed by qualified individuals in accordance with predetermined work and inspection instructions.
2.
Provide a statement that all conditions (operations, tests, inspections, specifications, etc.) of the NRC package approval and the U.S.
Department of Transportation shipping requirements are satisfied prior to shipment.
3.
Provide a statement that all necessary shipping papers will be prepared, as required.
4.
Provide a statement tnat departure, arrival time and destination of a package will be established and e itored to a degree consistent with the safe transportation of the pack.ge.
XIV.
Inscection, Test and Oceratino Status 1.
Provide a statement that identification of the insoection, test, and ocerating status of packages and components is kncwr, Oy affected organizat ans.
i 2.
Provide a statement that the apolication and removal of inspection and weldiag stamos and status indicators sucn as tags, markings, labels, and stamos are procedurally controlled.
4 9
9
/ v vl, t
L 'i L
9_
3.
Provide a statement that bypassing of required inspections, tests, and other critical operations is procedurally, controlled.
4, Provide a statement that the status of nonconforming, inoperative, or ma.lfunctioning packages or components is identified to prevent inadvertent use.
XV. Nenconforming Material, Parts, or Comoonents 1.
Provide a statement that the identification, documentation, segregation, review disposition, and notification to affected organizations of nonconforming materials, parts, components, or services are procedurally controlled.
2.
Provide a statement that documentation identifies the nonconforming item; describes the nonconformance, the disposition of the nonconformance, and the inspection requirements; and includes signature approval of the disposition.
3.
novide a statement that nonconforming items are segregated from acceptable items and identified as discrepant until properly dispositioned.
4.
Provide a statement that acceptability of rework or repair of materials, parts, components and systems is verified by reinspecting and retesting the item as originally inspected and tested or by a method which is at least equal to the original inspection and testing method.
XVI. Corrective Action 1.
Provide a statement that evaluation of conditions adverse to quality (such as nonconformances, failures, malfunctions, deficiencies, deviations, and defective materf al and equipment) is conducted to determine t' e need for corrective action in accordance with established procedures.
2.
Provide a statement that corrective action is initiated following the determination of a condition adverse to quality to preclude recurrence.
3.
Provide a statement that follow-up reviews are conducted to verify proor-implementation of corrective actions and to close out the corrective action cocumentation.
XVII.
Cuality Assurance Records 1.
Provide a statement that sufficient records ar* 'aintained to provide documentary evidence of the quality and safety of items and the activities Ac7 9'7 4 i: J L 'r J
9 affecting quality and safety.
2.
Provide a statement that QA records include coerating logs; results of reviews, inspections, tests, audits, and material analyses; qualification of personnel, procedures, and equipment; and other documentation such as drawings, specifications, procurement documents, calibration procedeces and reports; nonconformance reports; and corrective action reports.
3.
Provide a statement that records are identifiable and retrievable.
4.
Provide a statement that a list of the required recurds and their storage locations will be maintained.
5.
Provide a statement that design related records (e.g., drawings, calculations etc.) are maintained for the life of tne shipping package and all other records are maintained for a minimum of two years.
6.
Provide a statement that inspection and *est records contain the following where applicable:
(1) A description of the type of observation.
(2) Evidence of completing and verifying a manufacturing, inspection, or test operation.
(3) The date and results of the inspection or test.
(4)
Information related to conditions adverse to quality.
(5)
Inspector or data recorder identification.
(6) Evidence as to the acceptability of the results.
XVIII. Audits 1.
Provide a statement that audits are performed in accordance with preestaclished written procedures or check lists and conducted by personnel not having direct responsibilities in the areas being audited.
2.
Provide a statement that audit results are documented and then reviewed witn management having responsibility in the area audited.
3.
Provide a sta tement that responsible management takes the necessary action to coi rect the deficiencies revealed by the audit.
n <
)
11 4.
Provide a statement that deficient areas are reaudited on a timely basis to verify implementation of corrective actions which minimize recurrence of deficiencies.
5.
Provide a statement that audits of the QA program are performed at least annually based on safety significance of the activity being audited.
4 b;3 2' J
-