ML19224D734
| ML19224D734 | |
| Person / Time | |
|---|---|
| Site: | 07100054 |
| Issue date: | 06/01/1979 |
| From: | Macdonald C NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS) |
| To: | Witte M OKLAHOMA STEEL CASTINGS CO. |
| References | |
| NUDOCS 7907160228 | |
| Download: ML19224D734 (12) | |
Text
ps nec
+
o UNITED STATES EE (gj' h NUCLEAR REGULATORY COMMISSION
).,-
C WASHINGTON, D. C. 20555 h
E f
JUN 011979
+.***
FCTR: RHO 71-0054 Oklahoma Testing Laboratories ATTN:
Mr. M. A. Witte P.O. Drawer 60268 Oklahoma City, OK 73146 Gentleman:
This refers to your application dated June 23, 1978 requesting approval of your Quality Assurance (QA) program as meeting the QA program requirements of 10 CFR 971.El.
Additional information is required to satisfy the requirements of Appendix E to 10 CFR Part 71.
To assist you in preparing this information, we have enclosed the acceptance criteria the staff uses to evaluate a licensee's QA program for transportation packages for normal /special form radioactive material.
Please revise your QA program description to address the enclosed criteria and submit seven copies of the revised program within 30 days follo.fing receipt of this letter.
If you have any questions regarding this request, please contact Jack Spraul at (301) 492-7741.
Sincerely, Charles E. MacDonald, Chief Transportation Branch Division of Fuel Cycle and Material Safety, NMSS
Enclosure:
Acceptance Criteria l
357 236 l
)
l l
7 0 0716 0 22'f"
i 10 CFR 71 - APPENDIX E ACCEPTANCE CRITERIA - TRANSPORTATION PACKAGES FOR NORMAL /SPECIAL FORM RADI0 ACTIVE MATERIAL I.
Organization 1.
Provide a statement that the responsibility for the QA program is retained and exercised by the applicant.
2.
Identify and describe the QA/QC functions performed by the applicant's QA organization or dele' gated to other organizations providing controls to assure appropriate elements of Appendix E will be implemented.
3.
Provide a current organizational chart that identifies the organizational elements which function under the control of the QA program.
4.
Identify and describe the responsibilities of each job function shown cn the organization chart.
5.
Describe the duties and qualifications of the individual who retains overall authority and responsibility for the OA program.
6.
Provide a statement that designated QA individuals have the responsibility and authority, deline.ated in writing, to stop unsatisfactory work and control further processing, delivery, or installation of nonconforming material.
II.
Qualit) Assurance Program 1.
Provide a statement that management (i.e., above or outside the QA organization) regularly as; esses the scope, status, implementation, 2
and effectiveness of the QA program to assure that the program is adequate and complies with 10 CFR Part 71, Appendix E criteria.
2.
Provide a statement that provisions are established to control the distribution of the QA manuals and revisions thereto.
357 237
3.
Provide a statement that provisions are established for communicating to all responsiLle organizations and individuals that quality policies, QA manuals, and procedures are mandatory requirements which must be implemented and enforced.
4.
Identify the safety-related systems, structures and components controlled by the QA program.
5.
Provide a statement that provisions are established for the resolution of disputes involving quality, arising from a difference of opinion between QA/QC personnel and other department (engineering, procurenent, manufacturing, etc.) personnel.
6.
Provide a statement that an indoctrination and training program is establisned such that:
(1)
Personnel responsible for performing qu =lity-related activities are instructed as to the pura,se, scope, and implementation of the QA manuals, instructions, and procedures.
(2)
Personnel performing quality-affecting activities are trained and qualified in tl.e principles and techniques of the activity being performed.
(3)
The scope, the objective, and the method of implementing the indoctrination and training program are documented.
(4)
Proficiency of personnel performing quality-affectir.g activities is maintained by retraining, reexamining, and/or recertifying.
7.
Provide a statement that quality-related activities are performed with specified equipment under suitable environmental conditions, and prerequisites have been satisfied prior to inspection and test.
III.
Desian Control 1.
Provide a statement that measures are established to carry out desigr, activities in a planned, controlled, and orderly manner.
2.
Provide a statement that measures are established to carrectly translate the applicable regulatory requirements and design bases into specif'ca-tions, drawings, written procedures, and instructions.
3.
Provide a statement that quality standards are specified in the design documents, and deviations and changes from these quality standards are control!ed.
3 :C 35/
c3d 4.
Provide a statement that designs are reviewed to assure that (1) design characteristics can be controlled, inspected and tested and (2) inspection and test criteria are identified.
5.
Provide a statement that proper selection and accomplishment of design verification or checking processes such as by design reviews, alternate cal ulations, or qualification testing are performed.
When a test progiam is used to verify the adequacy of a design, a qualification test of a prototype unit under design conditions should be used.
6.
Provide a statrment that individuals or groups responsible for design verification are other than the original designer and the designer's imn:ediate supervisor.
7.
Provide a statement that design and specification changes are subject to the same design controls and approvals that were applicable to the original design unless the lictnsee designates another qualified responsible organization.
8.
Provide a statement that the positions or groups responsible for design reviews and other design verification activities and their authority and responsibility are identified and controlled by written procedures.
IV.
Procurement Document Control 1.
Provide a statement tlat procer
's are established that clearly delineate the sequenc: of actions to be accomplished in the prepara-tion, review, approva, and 'ontrol of procurement documents.
2.
Provide a statement th6t procurement documents identify the applicable 10 CFR Part 71, Appeadix E requirements which must be complied with and described in the supplier's QA program.
3.
Provide a statement that procurement documents contain or reference the design basis technical requirements 'r.ciuding the applicable regulatory requirements, material and component identificatic~.
requirements, drawings, specifications, codes and industrial Mndards, test and inspection requirements, and special process instructions.
4.
Provice a statement that procurement documents identify the documen-tation (e.g., drawings, specifications, procedures, inspection and fabrication plans, inspection ar.
test records, personnel and procedures qualifications, and chemical and physical test results of material) to be prepared, maintained, ar submitted to the purchaser for review and approval.
357 239
5.
Provide a statement that procurement documents identify those records to be retained, controlled, and maintained by the supplier, and those delivered to the purchaser prior to use or installation of the ha rdwa re.
6.
Provide a statement that procurement documents cintain the procuring agency's right of access to supplier's facilities and records for source inspection and audit.
7.
Provide a statement that changes and revisions to procurement documents are subject to at least the same review and approval as the original document.
V.
Instructions, Procedures, and Drawings 1.
Provide a statement that activities affecting quality are prescribed and accomplished in accordance with documented instructions, procerures, or drawings.
~
2.
Provide a statemcat that provisioas are established which clearly delineate the sequence of actions to be accomplished in the prepara-tion, review, approval, and control of instructions, procedures, and drawings.
3.
Provide a statement that the QA organization reviews and concurs with inspection plans; test, calibration, and special process procedures; drawings and specifications; an changes thereto or acceptable alternatives are described.
VI.
Document Control 1.
Provide a statement that the review, approval, and issue of documents and changes thereto, prior to release, are procedurally controlled to assure they are adequate and the quality requirements are stated.
2.
Provide a statement that changes to documents are reviewed and approved by the same organizations that performed the original review and approval or by other qualified responsible organizations delegated by the applicant.
3.
Provide a statement that approved changes are included in instructions, procedures drawings, and other documents prior to implementation of the change.
4.
Provide a statement that documents are available at the locatior, where the e_tivity will be performed prior to couencing the work.
357 2 @
5.
Provide a statement that a master list, or equivalent, is established to identify the current revision number of instructions, procedures, specifications, drawings, and procure.nent docuraents.
VII.
Control of Purchased Materials, Parts and Components 1.
Provide a statement that qualified personnel evaluate the supplier's capability to provide acceptable quality services and products.
2.
Provide a statement that the evaluation of suppliers is based on one or more of the following:
(1) The supplier's capability to comply with the elements of Appendix E to i0 CFR Part 71 that are apolicable to the type of material, equipment, or service being procured.
(2) A rev'ew of previous records and performance of suppliers who have provided similar articles of the type being orocured.
(3) A survey of the supplier's facilities and QA program to determine his capability to supply a product which meets the design, manufacturing, and quality requirements.
3.
Provide a statement that the results of supplier evaluations are documented c.nd filed.
4.
Provide a statement that surveillance, if required, of suppliers during fabrication, inspection, testing, and shipment of materials, equipment and components is planned and performed in acordance W th written procedures to assure conformance to the purchse order r 2quirements.
5.
Provide i statement that the suppl'.er furnishes the following records as a minimum to the purchaser:
(1) Documentation that identifies the purchased material or equipment and the specific procurement requirements (e.g., codes, standards, and specifications) met by the items.
(2) Documentation that identifies any procurement requir' ents which have not teen met together with a description vf those noticonformances dispositioned " accept as is" or " repair."
6.
Provide a statement that receiving inspection of the supplier-furnished material, equipment, and services is performed to assure:
357 241
, (1) The material, component, or equipment is properly identified and corresponds with the identification on receiving documentation.
(2) Material, components, equipments, and acceptance records are inspected and judged acceptable in accordance with predetermined inspection instructions, prior to installation or use.
(3)
Inspection records or certificates of conformance attesting to the acceptance of material and components are available prior to installation or use.
(4)
Items accepted and released are identified as to their inspection status prior to forwarding them to a controlled storage area or releasing them for further work.
VIII.
Identification and Control of Materials, Parts, and Components 1.
Provide a statement that procedures are established to identify and control materials, parts, and components including partially fabricated subassemblies.
2.
Provide a statement that the identification and control procedures assure that identification is maintained either on the item or on records traceable to the item to preclude use of incorrect or defective items.
3.
Provide a statement that identification of materials and parts important to the function of safety-related systems and components can be traced to the appropriate documentation such as drawings, specifications, purchase orders, manufacturing and inspection documents, deviation reports, and physical and chemical mill test reports.
4 Provide a statement that the location and the method of identification do not affect the fit, function, or quality of the itcm being identified.
5.
Provide a statement that correct identification of materials, parts, and components is verified and documented prior to release for fabrication, assembling and instcllation.
L
Control of Special Processes 1.
Provide a statement that special processes such as welding, heat treating, andestructive testing, and cleaning are procedurally controlled.
2.
Provide a statement that procedures, equipment, and personnel connected with special processes are qualified in accordance with applicable codes, standards, and specifications.
3.
Provide a statement that qualification records of procedures, equipment, and personnel associated with special processes are established, filed, and kept current.
X.
Inspection 1.
Provide a statement that an inspection program which verifies conformance of quality-affecting activities with requirements is established, documented, and acccmplished in accordance with wr:tten and controlled procedures.
2.
P ovide a statement that inspection personnel are independent from tle individuals performing the activity being inspected.
3.
Provide a statement that inspectors are qualified in accordance with applicable codes, standards, and company training programs; and their qualificatioris and certifications are kept current.
4.
Provide a statement that modifications, repairs, and replacements are inspected in accordance with the original design and inspection requirements or acceptable alternatives.
5.
Provide a statement that provisions are established that id2ntify mandatory inspection hold points for witness by an inspector.
XI.
Test Control 1.
Provide a statement that a test program to demonstrate that the item or component will perfom satisfactorily in service is established, documented, and accomplished in accordance with written controlled procedures.
2.
Provide a statement that modifications, repairs, and replacements are tested in accordance with the original design and testing requirements or acceptable alternatives.
3.
Provide a statement that test results are documented, evaluated, and their acceptability determined by a qualified, responsible individual or group.
357 20
. XII. Control of Measuring and Test Equipment 1.
Provide a statement that measuring and test instruments are calibrated at specified intervals based on the required accuracy, purpose, degree of usage, stability characteristics, and other conditions affecting the measurement.
2.
Provide a statement that measuring and test equipment is identified and traceable to the calibration test data.
3.
Provide a statement that measures are taken and documented to determine the validity of previous inspections performed when measuring and test equipment is found to be out of calibration.
4.
Provide a statement that refere,1ce and transfer standards are traceable to nationally recognized standards; or, where national standards do not exist, provisions are established to document the basis for calibration.
XIII. Handling, Srq age, and Shipping 1.
Provide a statement that special handling, preservation, storage, cleaning, packaging, and shipping requirements are established and accomplished by qualified individuals in accordance with predetermined work and inspection instructions.
2.
Provide a statement that all conditions (operations, tests, inspections, specifications, etc.) of the NRC package approval and the U.S.
Department of Transportation shipping requirements are satisfied prior to shipment.
3.
Provide a statement that all necessary shipping papers will be prepared, as required.
4.
Provide a statement that departure, arrival time and destination of a package will be established and monitored to a degree consistent with the safe transportation of the package.
XIV.
Inspection, Test and Operating Status 1,
Provide a statement that identification of the inspection, test, and operating status of packages and comoonents is known by affected organizations.
2.
Provide a statement that the application and removal of inspection and welding stamps and status indicators such as tags, markings, labels, ana stamos are prc;edurally controlled.
35_/
244
_9_
3.
Provide a ctatement that bypassing of required inspections, tests, and other critical operations is procedurally controlled.
4.
Provide a statement that the status of nonconforning, inocerative, or malfunctioning packages or components is identified to orevent inadvertent use.
XV.
Nonconforming Material, Parts, or Components 1.
Provide a stateme.it that the identification, documentation, segregation, review disposition, and notification to affected organizations of nonconforming mater ials, parts, components, or services are procedurally controlled.
2.
Provide a statement that documentation identifies the nonconforming item; describes the nonconformanc'.
tha disposition of the nonconformance, and the inspection requirements; and includes signature approval of the disposition.
3.
Provide a statement that nonconforming items are segregated from acceptable items and identified as discrepan' until properly dispositioned.
4.
Provide a statement that acceptability or rework or repair of materials, parts, components and systems is verified by reinspecting and retesting the item as originally inspected and tested or by a method which is at least equal to the original inspection and testing method.
XVI.
Corrective Action 1,
Provide a statement that evaluation of conditions adverse to quality (such as nonconformances, failures, malfunctions, deficiencies, deviations, and defective material and equipment) 's conducted to determine the need for corrective action in accor* ice with established procedures.
2.
Provide a statement that corrective action is initiated following the determination of a condition adverse to quality to preclude recurrence.
3.
Provide a statement that follow-up reviews are conducted to verify proper implementation of corrective actions and to close out the corrective action documentation.
XVII.
Quality Assurance Records 1,
Provide a statement that sufficient records are maintained to provide documentary evidence of the quality and safety of items and the activities 357 245
affecting quality and safety.
2.
Provide a statement that QA records include operating logs; results of reviews, inspections, tests, audits, and material analyses; qualification of personnel, procedures, and equipment; and other documentation such as drawings, specifications, procurement documents, calibration procedures and reports; nonconformance reports; and corrective action reports.
3.
Provide a statement that records are identifiable and retrievable.
4.
Provide a statement that a list of the required records and their storage locations will be maintained.
5.
Provide a statement that design related records (e.g., drawings, calculations, etc.) are maintained for the life of the shipping package and all other records are maintained for a minimum of two years.
6.
Provide a statement that inspection and test records contain the following where applicable:
(1) A description of the type of observation.
(2) Evidence of completing and verifying a manufacturing, inspection, or test operation.
(3) The date and results of the inspection or test.
(4)
Information related to conditions adverse to quality.
(5)
Inspector or data recorder identification.
(6)
Evider.ce as to the acceptability of the results.
XVIII. Audits _
l.
Provide a statement that audits are perfonned in accoraance with preestablished written procedures or check lists and conducted by personnel not having direct responsibilities in the areas being audited.
2.
Provide a statement that audit results are documented and then reviewed with management having responsibility in the area audited.
3.
Provide a statement that responsible management takes the necessary action to correct the deficiencies revealed by the audit.
357 2 %
4.
Provide a statement that deficient areas are reaudited on a timely basis to verify implementation of corrective e.ctions which minimize recurrence of deficiencies.
5.
Provide a statement that audits of the QA program are performed at least annually based on safety significance of the activity being audited.
357 247