ML19221A859
| ML19221A859 | |
| Person / Time | |
|---|---|
| Issue date: | 08/11/1972 |
| From: | NRC OFFICE OF STANDARDS DEVELOPMENT |
| To: | |
| References | |
| REGGD-01.130, REGGD-1.130, NUDOCS 7907100134 | |
| Download: ML19221A859 (1) | |
Text
August 11,1972 8AFETY GUIDE 30 OUALITY ASSURANCE REQUIREMENT 8 FOR THE INSTALLATION, INSPECTION, AND TEf> TING OF INSTRUMENTATION AND ELECTRIC EQUIPMENT A.
Introduction Requirements for Instrumentation and Electric Equipment Durms the Construction of Nuclear Appendix B to 10 CFR Part 50, " Quality Power Generating Stations" (also designated as Assurance Criteria for Nuclear Power Plants and IEEE Std 336 1971)' are generally acceptable Fuel Reprocessing Plants," estabhshes quality and provide an adequate basis for complying assurance requirements for the design, with the pertinent quality assurance construction, and operation of nuclear power requirements of Appendix B to 10 CFR Part 50, plant structures, systems, and components. His subject to the following:
safety guide describes an acceptable method of complying with the Commission's regulations with regard to the q uality assurance 1.
ANSI N45.2.4-1972 should be used in requirements for the installation, inspection, and cordunction with ANSI N45.21971, testing of nuclear power plant instrumentation
" Quality Assurance Program and electric equipment.
Requirements for Nuclear Power Plants." (It is expected that future B.
Dimtion revis2ons of ANSI N45.2.4-1972 will Working Group N45-3.4 (formerly ad hoc committee N45-3.4, also designated ad hoc committee JCNPS/AH3 by the IEEE) of the 2.
Section 9 of ANSI N45.2.4-1972 lists American National Standanis Institute additional guides and standards made Standards Committee N45, Reactor Plants and applicable by ANSI N45.2.4. The Their Maintenance, has developed a standard specific applicability or acceptability of which includes quality assurance requirements these listed guides and standards has for the installation, inspection, and testmg of been or will be covered separately in nuclear power plant instrumentation and electric other safety guides or in appropriate equipment. This standard was approved by Commission regulations.
subcommittee N45-3, Nuclear Quality Assurance Standards, of the American National Standards 3.
Although subdivision 1.1 of G SI Committee N45, and the full committee and its N 45.2.4 1972 states that the Secretariat, and it was subsequently approved requirements promulgated apply during and designated N45.2.4-1972 by the American the construction phase of a nuclear National Standards Institute on March 1,1972.
power plant, these requirements are This standard was also approYed by the also to be considered applicable for the IEEE Standards Committee on September 16 Installation, inspection, and testing of 1971, and was designated IEEE Std 336-1971.
instrumentation and electric equipment during the operation phase of a nuclear C.
Regulatory Position power plant.
The requirements for the installation, inspection, and testing of nuclear power plant instrumentation and electric equipment which
' Copies may be obtained from either the Institute of Doctrical and Bectronics Engineers or the American are included in ANSI N45.2.41972' Sochty of Mechanical Engineers, United Engineering
" Installation, inspection, and Testing Cantar,345 E. 47th street, New York, N.Y.10017 s
125 144 3-7907100) [