ML19220B279
| ML19220B279 | |
| Person / Time | |
|---|---|
| Site: | Crane  |
| Issue date: | 07/03/1975 |
| From: | Rosa F Office of Nuclear Reactor Regulation |
| To: | Moore V Office of Nuclear Reactor Regulation |
| References | |
| NUDOCS 7904250580 | |
| Download: ML19220B279 (2) | |
Text
,
veo /
O e
JUL 2 T5 V. A.." core, Assis tant Director for L'..'Rs, Group 2, EL THT.U : Tnomas A. Icpolito, Chief, Electrical, Instrumentation ;
Systems branch, TR THREE "ILE ISLAliD tiUCLEAR STATICN, UhIT 2, REQUEST FOR ACDITICUL INFOR"ATION Plant Name: Tnree Mile Island L' nit 2 Occket Nur.ber: 5D-320 Licensing Stage: Operating License Milestone Tsuccer:
Request for Additicnal Infor.aticn Respons,ble 3ra.ch and Project Leader: LWR 2-2, H. Silver Tecnnical Review Branch Involved: EI3CS Brancn Cescription of Review: Supplemental Cuestion Requested Completion Uate: l'A Review Status: Awaiting Infonnation T1e enclosed request for additional information was crepared by TR:RS, Electrical, Instrumentation anc Control Systems erancn.
.,is request for additional infor.ation is being transmitted to each apoiscant whose plant is undert;oing an operating license review.to ensure tnat an adequate cualification test program is provided for balance of plant Class IE equipment.
Onginal Sie: ed Dy F. Rosa Faust Rosa, Section Leader Electrical, Instrumentation anc Control Systems 5rancn Division of Technical Review Office of Nuclear Reactor Regulation
Enclosure:
As statad above cc:
S. Hanauer DISTRIBUTION F. Scheceder DCCKET FILES A. Giamousso NRR READING V. Stello EIC READING K. Kniel F. ROSA H. Silver T. Ippolito F. Asne W. Mcdonald
_ E!C TR EIC:TR
._.EIQ:TR,
.. a c.'J o,..e,
- m.
.E$3p ;;;;g.
.,,,[Eg
_\\ _..Q eu *= a = s >
. l.l 1 ).l5.......
.. l)...l.IS
..l./.1l.U Dars h Fom AIC-313 (Ite,. SS)) A.ECM 0240 T." u. s. aav s a= uant oman=o or ric s: t e74.aze.n ee kA 7904250580
a' THREE MILE ISLA :D ::UCLEAR STATIOfi U iIT 2 REQUEST FOR ADDITI0l;AL I iFCF"ATIO 1 222.40 The staff requires tnat the following qualification test (3.11) program infor ation be provided for balance of plant Class IE (7.0) equipment.
(8.M a) Equipment Design specification requirements, b) Test Plan, c) Test Setup, d)
Test procedures, and e) Acceptability goals and requi remen ts.
This information shall be provided for at least one item f n each of the following groups of Class IE ecuipment, including test resul ts.
a) Swi tchgea r b) Motor control centers,
c) Valve operators (in containment) d) Motors e) Logic Equipment f) Cable, and g) Diesel Generator Control eqripment.
It is not necessary to respond to any aspect of the above item which has been previously addreesed.
y -,a sy
-