ML19030A330
ML19030A330 | |
Person / Time | |
---|---|
Site: | Clinch River |
Issue date: | 01/18/2019 |
From: | James Shea Tennessee Valley Authority |
To: | Office of New Reactors |
Fetter A | |
References | |
TVACLINCHRIVERESP, TVACLINCHRIVERESP.SUBMISSION.6, CRN.P.PART02, CRN.P.PART02.2 | |
Download: ML19030A330 (45) | |
Text
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-1. Map of Physiographic Provinces 2.5.1-163 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Source: Reference 2.5.1-33 Figure 2.5.1-2. Geologic Time Scale 2.5.1-164 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: Modified from References 2.5.1-5, 2.5.1-24, and 2.5.1-34 Figure 2.5.1-3. Map of Lithotectonic Tectonic Terranes, Provinces and Major Tectonic Boundaries 2.5.1-165 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Source: Modified from Reference 2.5.1-26 Description of Map Units Gently folded and flat-lying carbonates rocks: indurated limestone and dolomite that has not been strongly deformed. Predominantly found in interior plateaus and lowlands. Dissolution may produce solution, collapse, and cover-collapse sinkholes.
Where carbonates are thick and extensive, cave systems may be long and complex.
Where thin and interbedded with non-carbonates, caves are small and short.
Geometry of cave passage patterns often shows stratigraphic and bedding-plane control often resulting in branchwork caves. (Reference 2.5.1-35)
Folded, faulted carbonate rocks: limestone and dolomite in areas flanking and in orogenic zones. May be intensely folded and faulted, commonly well jointed, commonly with cleavage. These rocks are located in the Valley and Ridge Province on this map and most are Paleozoic in age. Dissolution may produce solution, collapse, and cover-collapse sinkholes. Caves range from small and simple to long and complex systems. Geometry of cave passage patterns tend to show at least some structural control producing network caves. (Reference 2.5.1-35)
Marbles and metalimestones: highly deformed carbonate rocks, usually found in long, thin, linear belts or pods. Mapped areas are often exaggerated as these rocks are usually mapped with associated, non-soluble metamorphic rocks. Dissolution may result in solution, collapse, and cover-collapse sinkholes and small, short caves.
Figure 2.5.1-4. Regional Distribution of Carbonate Rocks 2.5.1-166 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Source: Reference 2.5.1-25 Figure 2.5.1-5. Map of Sinkhole and Cave Development for the State of Tennessee 2.5.1-167 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: Reference 2.5.1-27 Figure 2.5.1-6. Sinkhole Types 2.5.1-168 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: Elevation and bathymetric data from Reference 2.5.1-190, Sheet A-1.
Figure 2.5.1-7. Shaded Relief Map of Eastern North America Demonstrating the Extent of the Appalachian Orogenic Belt 2.5.1-169 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: Geologic time scale (Reference 2.5.1-33) with tectonic events that have affected the Appalachian orogenic belt (References 2.5.1-34 and 2.5.1-65).
Figure 2.5.1-8. Geologic Time Scale with Orogenic Events 2.5.1-170 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Sequential development of the Appalachian orogen from the breakup of Rodinia to the breakup of Pangea, from Reference 2.5.1-73.
Deep crustal structure from Reference 2.5.1-277.
See Figure 2.5.1-3 for map of lithotectonic terranes.
Figure 2.5.1-9. Sequential Development of Appalachians Profiles 2.5.1-171 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Map of eastern North America, illustrating tectonic inheritance through the amalgamation and breakup of two supercontinents.
Features formed during the Grenville orogeny (formation of Rodinia) shown in red; those formed during the Appalachian orogenies (formation of Pangea) shown in blue.
Rifted margins that formed from supercontinent breakup are shown in green (Iapetus ocean) and orange (Atlantic Ocean).
Modified from Thomas, 2006 Reference 2.5.1-38.
Figure 2.5.1-10. North American Rifted Margin 2.5.1-172 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Facies diagram of passive margin to stable shelf strata of the western Blue Ridge and Valley and Ridge (from Reference 2.5.1-13).
Units have been palinspastically restored along major Valley and Ridge thrust faults.
Blue limestone facies; Lavender dolomite facies; Light blue shale facies; Beige and medium brown coarse clastics and turbidites; Gray siltstone facies; Light yellow sandstone, shale, and dolomite intertidal facies.
Figure 2.5.1-11. Facies Diagram of Stable Shelf Strata 2.5.1-173 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Collision model for the Alleghanian orogeny (From Reference 2.5.1-74).
Red lines and symbols indicate the feature is active in the time interval shown.
A) Initial contact between Gondwana and Laurentia produced step-over basins in New England and deposition in the Appalachian basin.
B) Continued collision resulted in greater clastic input in the foreland, with the development of dextral strike-slip faults in the interior of the orogen.
C) Clockwise rotation of Gondwana begins to dominate the collision, resulting in a more head-on collision in the southern Appalachians.
D) Head-on collision in the southern Appalachians results in thrusting of the Blue Ridge-Piedmont megathrust sheet and foreland fold-thrust belt development.
EPFS Eastern Piedmont Fault System.
Figure 2.5.1-12. Alleghanian Zipper Tectonics 2.5.1-174 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Distribution of Mesozoic features in the southern and central Appalachians.
Central Atlantic Magmatic Province (CAMP) diabase dikes shown as thin green lines, with silicified faults shown as heavy orange lines.
Dark shaded areas represent exposed Triassic rift basins.
From Reference 2.5.1-87.
Figure 2.5.1-13. Mesozoic Features Map 2.5.1-175 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-14. Site Vicinity Stratigraphic Columns 2.5.1-176 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: After Reference 2.5.1-112 Figure 2.5.1-15. The Cumberland Plateau and Interior Low Plateaus in Tennessee 2.5.1-177 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
From Reference 2.5.1-112 Figure 2.5.1-16. Mississippian Stratigraphic Units in Tennessee 2.5.1-178 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: Reference 2.5.1-112 Figure 2.5.1-17. Pennsylvanian System in Tennessee 2.5.1-179 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Lithotectonic terranes, provinces, and major tectonic boundaries (after References 2.5.1-24, 2.5.1-34, and 2.5.1-137)
Figure 2.5.1-18. (Sheet 1 of 2) Lithotectonic Terrane Map 2.5.1-180 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note:
Simplified tectonic map of the Central Blue Ridge terranes.
Figure 2.5.1-18. (Sheet 2 of 2) Lithotectonic Terrane MapBlue Ridge Zoom 2.5.1-181 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note:
USGS sources for geologic map: A - OFR-04-1355, Reference 2.5.1-116; B - OFR-05-1325, Reference 2.5.1-115; C - OFR-05-1323, Reference 2.5.1-114; D - OFR-05-1324, Reference 2.5.1-117. Major faults from References 2.5.1-24 and 2.5.1-34. Fall Line from Reference 2.5.1-20.
Figure 2.5.1-19. (Sheet 1 of 2) Site Region Geologic Map 2.5.1-182 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note:
USGS sources for geologic map: A - OFR-04-1355, Reference 2.5.1-116; B - OFR-05-1325, Reference 2.5.1-115; C - OFR-05-1323, Reference 2.5.1-114; D - OFR-05-1324, Reference 2.5.1-117. Major faults from References 2.5.1-24 and 2.5.1-34. Fall Line from Reference 2.5.1-20.
Figure 2.5.1-19. (Sheet 2 of 2) Site Region Geologic Map 2.5.1-183 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Gravity anomaly (A) and aeromagnetic residual data (B) from CEUS SSC (Reference 2.5.1-190).
See Figure 2.5.1-18, Sheet 1 for numbered fault references.
Figure 2.5.1-20. Aeromagnetic and Gravity Maps 2.5.1-184 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Map of current stresses in the central and eastern U.S. (after Reference 2.5.1-185).
Black and gray arrows - orientation from borehole observations; Blue arrows - borehole observations used in calculating the regional average within 250 km (155 mi) of the seismic zones (solid ellipses);
Red arrows and angular sectors - orientation from focal mechanism inversion.
Figure 2.5.1-21. (Sheet 1 of 2) Current Compressive StressEastern United States 2.5.1-185 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Gray focal mechanisms from Reference 2.5.1-183; black focal mechanisms from Reference 2.5.1-306.
SH - maximum horizontal stress; Sh - minimum horizontal stress; Sv - vertical stress.
Source: Reference 2.5.1-306 Figure 2.5.1-21. (Sheet 2 of 2) Regional Stress Map from Hurd and Zoback 2.5.1-186 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: Modified from Reference 2.5.1-202 Figure 2.5.1-22. Landslide Hazard Map for the Clinch River Nuclear Site Region 2.5.1-187 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-23. LiDAR Digital Elevation Model Coverage 2.5.1-188 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: Local geographic nomenclature from Lemiszki (Reference 2.5.1-215)
Figure 2.5.1-24. Local Physiography with Local Nomenclature for Valleys and Ridges 2.5.1-189 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-25. Geologic Field Reconnaissance Waypoint Locations 2.5.1-190 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-26. (Sheet 1 of 6) Quaternary Terrace Map Adjacent to the Clinch River Arm of the Watts Bar Reservoir Within the Clinch River Nuclear Site Area, Location A 2.5.1-191 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-26. (Sheet 2 of 6) Quaternary Terrace Map Adjacent to the Clinch River Arm of the Watts Bar Reservoir Within the Clinch River Nuclear Site Area, Location B 2.5.1-192 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-26. (Sheet 3 of 6) Quaternary Terrace Map Adjacent to the Clinch River Arm of the Watts Bar Reservoir Within the Clinch River Nuclear Site Area, Location C 2.5.1-193 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-26. (Sheet 4 of 6) Quaternary Terrace Map Adjacent to the Clinch River Arm of the Watts Bar Reservoir Within the Clinch River Nuclear Site Area, Location D 2.5.1-194 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
See Figure 2.5.3-4 for Longitudinal Profiles of Quaternary Terraces along the Clinch River.
Figure 2.5.1-26. (Sheet 5 of 6) Quaternary Terrace Projections to the Clinch River for creation of Longitudinal Profile 2.5.1-195 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
See Figure 2.5.3-4 for Longitudinal Profiles of Quaternary Terraces along the Clinch River.
Figure 2.5.1-26. (Sheet 6 of 6) Quaternary Terrace Projections to the Clinch River for creation of Longitudinal Profile 2.5.1-196 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: Simplified geologic map of the Clinch River Nuclear site vicinity.
Figure 2.5.1-27. Simplified Site Vicinity Geologic Map 2.5.1-197 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Generalized stratigraphic column of the geology of the CRN site vicinity (right) with Paleozoic sea level curves, Reference 2.5.1-49 cratonic sequences, glacial intervals, and tectonic events (left; modified from Reference 2.5.1-206) that correspond to the time interval represented by the stratigraphic section (modified from Reference 2.5.1-9).
ABS-Absaroka Figure 2.5.1-28. Stratigraphic Column with Sea Level Curve 2.5.1-198 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-29. (Sheet 1 of 2) Site Location Geologic Map Showing Borings 2.5.1-199 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-29. (Sheet 2 of 2) Site Location Geologic Map Showing Borings 2.5.1-200 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-30. Geologic Cross-Section K-K of the Clinch River Nuclear Site 2.5.1-201 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Figure 2.5.1-31. Subsurface Investigation Borehole and Geologic Cross-Section K-K Locations 2.5.1-202 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Diagrammatic illustration of the propagation of the master Appalachian detachment (modified from Reference 2.5.1-159).
Inset shows palinspastically restored facies diagram of Neoproterozoic to late Paleozoic passive margin strata that was deposited along the Iapetan margin (modified from Reference 2.5.1-13).
Blue box indicates the approximate location of area depicted in inset.
Figure 2.5.1-32. Schematic Appalachian Detachment 2.5.1-203 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Note: Balanced cross-sections through the Valley and Ridge province from Reference 2.5.1-230 that intersect the Clinch River Nuclear site vicinity.
Figure 2.5.1-33. (Sheet 1 of 2) Tectonic Map Cross-SectionsValley and Ridge 2.5.1-204 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
Location of cross-sections shown in (A).
Tectonic map modified from Reference 2.5.1-102.
Figure 2.5.1-33. (Sheet 2 of 2) Tectonic Map Cross-SectionsLocations 2.5.1-205 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
See Site Area Geologic Cross Section A-A' (Figure 2.5.1-35).
See Plate 2 in Part 8 for more detailed geologic map of the site area.
Figure 2.5.1-34. Site Area Geologic Map 2.5.1-206 Revision 2
Clinch River Nuclear Site Early Site Permit Application Part 2, Site Safety Analysis Report Notes:
See site area geologic map for cross-section location (Figure 2.5.1-34).
No vertical exaggeration.
Geologic cross-section through the site area projected to Precambrian basement.
Figure 2.5.1-35. Site Area Geologic Cross-Section A-A 2.5.1-207 Revision 2