ML17334A596
ML17334A596 | |
Person / Time | |
---|---|
Site: | Cook ![]() |
Issue date: | 12/31/1997 |
From: | INDIANA MICHIGAN POWER CO. |
To: | |
Shared Package | |
ML17334A592 | List: |
References | |
NUDOCS 9801080350 | |
Download: ML17334A596 (16) | |
Text
ATTACHMENT TO AEP:NRC: 1077Z CORE OPERATING LIMITS REPORT, REVISION 1 9801080350 97'L230 PDR ADOCK 050003ih PDR
DONALD C. COOK NUCLEAR PLANT UNIT 2 CYCLE 12 CORE OPERATING LIMITSREPORT (COLR)
Revision 1 December 1997
COLR FOR DONALDC. COOK NUCLEAR PLANT UNIT2 CYCLE 12 DECEMBER 1997 1.0 CORE OPERAT1NG LIMITSREPORT This Core Operating Limits Report for the Donald C. Cook Nuclear Plant Unit 2 Cycle 12 has been prepared in accordance with the requirements of Technical Specification 6.9.1.9.
The Technical Specifications affected by this report are listed below:
3/4.1.1.4 Moderator Temperature Coefficient 3/4.1.3.1 Movable Control Assemblies Group Height 3/4.1.3.4 Rod Drop Time 3/4.1.3.5 Shutdown Rod Insertion Limit 3/4.1.3.6 Control Rod Insertion Limits 3/4.2.1 Axial Flux Difference (AFD) 3/4.2.2 Heat Flux Hot Channel Factor - Fq(Z) 3/4.2.3 Nuclear Enthalpy Hot Channel Factor - FN~
3/4.2.6 Allowable Power Level (APL)
Page1 of11
COLR FOR DONALDC. COOK NUCLEAR PLANT UNIT 2 CYCLE 12 DECEMBER 1997 The cycle-specific parameter limits for the specifications listed in Section 1.0 are presented in the following subsections. These limits have been developed using the NRC-approved methodologies specified in Technical Specification 6.9.1.9.
2.1 Moderator Tem erature Coefficient (Specification 3/4.1.1.4) 2.1.1 The Moderator Temperature Coefficient (MTC) limits are:
The MTC shall be less positive than or equal to the value given in Figure 1.
The EOL/ARO/RTP-MTC shall be less negative than or equal to - 4.37E-4 LOAM'F.
This limit is based on a Tavg program with HFP vessel Tavg of 571.5'F to 576.5'F where: ARO stands for AllRods Out BOL stands for Beginning of Cycle Life EOL stands for End of Cycle Life RTP stands for Rated Thermal Power HFP stands for Hot Full Thermal Power 2.1.2 The MTC Surveillance limit is:
The 300 ppm/ARO/RTP-MTC should be less negative than or equal to - 3.57E-4 hk/k/'F at a HFP vessel Tavg of 571.5'F to 576.5'F.
Page 2 of11
COLR FOR DONALDC. COOK NUCLEAR PLANT UNIT2 CYCLE 12 DECEMBER 1997 2.2 Rod Dro Time Dro Hei ht (Specification 3/4.1.3.4) 2.2.1 Allrods shall be dropped from 225 steps.
2.3 Shutdown Rod Insertion Limit (Specification 3/4.1.3.5) 2.3.1 The shutdown rods shall be withdrawn to at least 225 steps.
2.4 Control Rod Insertion Limits (Specifications 3/4.1.3.6 and 3/4.1.3. 1) 2.4.1 The control rod banks shall be limited in physical insertion as shown in Figure 2.
2.4.2 Successive Control Banks shall overlap by 97 steps. The sequence for Control Bank withdrawal shall be Control Bank A, Control Bank B, Control Bank C, and Control Bank D.
2.5 Axial Flux Difference (Specification 3/4.2.1) 2.5.1 The Allowable Operation Limits are provided in Figure 3.
2.5.2 The EGAL FLUX DIFFERENCE (AFD) target band during base load operations is
+3%, -3% (not applicable for this cycle).
2.5.3 The AFD target band is+5%, -5% for a cycle average accumulated burnup > 0.0 MWD/MIU.
Page 3 of 11
COLR FOR DONALD C. COOK NUCLEAR PLANT UNIT 2 CYCLE 12 DECEMBER 1997 2.6 Heat Flux Hot Channel Factor -Fq(Z) (Specification 3.2.2)
FQ(Z) 5 CFQ P
- E(Z) forP>0.5 FQ(Z) 5 2
- CFQ *E(Z) forP<0.5 THERMALPOWER RATED THERMALPOWER 2.6.1 CFq = 2.335 2.6.2 K(Z) is provided in Figure 4 Page 4 of 11
COLR FOR DONALD C. COOK NUCLEAR PLANT UNIT2 CYCLE 12 DECEMBER 1997 2.7 Nuclear Enthal Rise Hot Channel Factor - FN~ (Specification 3/4.2.3)
N F 5 CF~ * (I + PF~g * (1 - P))
THERMALPOP'ER RATED THERMALPOP'ER 2.7.1 CF~ = 1.56 2.7.2 PF~ = 0.3 Page 5 of11
COLR FOR DONALDC. COOK NUCLEAR FLANTUNIT 2 CYCLE 12- DECEMBER 1997 2.8 Allowable Power Level - APL (Specification 3.2.6)
CFg
- K(Z)
APL = min over Z for 2.8.1 V(Z) is provided in Table 1 for+ 5% AFD target band 2.8.2 CFq and K(Z) are provided in COLR Sections 2.6.1 and 2.6.2, respectively 2.8.3 The following table shows Fp values which correspond to Fq margin decreases that are greater than 2% per 31 Effective Full Power Days (EFPD). These values shall be used to adjust APL as per Surveillance Requirement 4.2.6.2. A 1.02 penalty factor shall be used at all cycle burnups that are outside this range.
Cycle Fp Burnup Penalty
/M ~Multi lier 0 1.0340 150 1.0340 311 1.0418 472 1.0483 633 1.0535 795 1.0527 956 1.0515 1117 1.0499 1278 1.0476 1439 1.0446 1600 1.0411 1761 1.0369 1922 1.0322 2084 1.0272 2245 1.0221 2406 1.0200 The burnup range only covers where Fp exceeds 1.02. Linear interpolation is adequate for intermediate cycle burnups.
Page 6 of 11
COLR FOR DONALDC. COOK NUCLEAR PLANT UNIT2 CYCLE 12 DECEMBER 1997 t e FIGURE 1 MODERATOR TEMPERATURE COEFFICIENT (MTC) 1.00 0.90 't,'4 t 0.80 0.70 LUNACCEPTAB LEOPERATIO 060 f't," e 0.50 0.40 030 t-,e 0.20 t
0.10 ACCEPTABLE OPERATION 4 000 C)
-0.10 V
p -0.20
-030
-0.40
-0.50
-0.60
-0.70
-0,80
-0.90 t t .
tet! 't,
-1.00 0 10 20 30 40 50 60 70 80 90 100 PERCENT RATED THERMALPOWER Page 7 of 11
COLR FOR DONALD C. COOK NUCLEAR PLANT UNIT2 CYCLE 12- DECEMBER 1997 FIGURE 2 ROD BANKINSERTION LIMITSVERSUS THERMALPOWER FOUR-LOOP OPERATION 250 225 (0.513, 225) 92 STEP OVERLAP 200 I(1.00, 189) 175 0
f g 150 ) !
125
-'W(09 128) l !
I r
g 100 A
0
] (BANKD) i 75 50 !
K 25 -r0 ~
(09 0) 0 0.00 0.10 0.20 030 0.40 0.50 0.60 0.70 0,80 0.90 1.00 FRACTION OF RATED THERMALPOWER Page 8 of 11
I COLR FOR DONALDC. COOK NUCLEAR PLANT UNIT2 CYCLE 12 DECEMBER 1997 FIGURE 3 ALGALFLUX DIFFERENCE LIMITSAS A FUNCTION OF RATED THERMALPOWER 100 90 I(-11) 90) i h Lf+u,)of j, I
0 ~UNACCEPTABLE UNACCEPTABLE so OPERATION h OPERATION I
I 7o ACCEPTABLE OPERATION 60 50 rh D ,'".';-," (-31, 50) ', (+31,50) 40 l
fi
', )" ffii 't t "
)o 6
E C
g 20 I',tttt O
hO 0
10 0
-50 -40 -30 -20 -10 0 10 20 30 40 50 Flux Difference (Delta I)) %
Page 9 of 11
0 fz
COLR FOR DONALDC. COOK NUCLEARPLANT UNIT2 CYCLE 12 DECEMBER 1997 FIGURE 4 K(Z) - NORMALIZEDFQ(Z) AS A FUNCTION OF CORE HEIGHT 1.2 (0.0, 1.0) , 1.0) 1 t
J [(12.0, 0.925) 0,8 0.6 N
0 z
0 ,4 1
0.2 1
0 0 10 12 CORE HEIGHT (FT)
Page 10 of11
COLR FOR DONALD C. COOK NUCLEAR PLANT UNIT 2 CYCLE 12 DECEMBER 1997 TABLE I V(Z) FUNCTION HT. BUHNUP (HHU/HTU)
PT (PT) 150 1000 2000 3000 4000 6000 8000 10000 12000 14000 16000 18000 22860 1 0.0 1.0000 1.0000 1.0000 l. 0000 1. 0000 1 0000 1 0000 1.0000 1 0000 F F F 1.0000'.0000 1.0000 1.0000 2 0.2 1.0000 1 0000 1.0000 F 1 ~ 0000 1.0000 1.0000 1 0000 1.0000 1 0000 F F 1 F 0000 1.0000 1.0000 1.0000 3 0.4 1.0000 1 0000 1.0000 F 1. 0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1. 0000 4 0.6 1. 0000 1.0000 1.0000 1. 0000 1.0000 1.0000 1 0000 1.0000 1.0000 F 1.0000 1.0000 l. 0000 1. 0000 5 0.8 1. 0000 1.0000 1.0000 1.0000 1.0000 1 0000 1 0000 1 0000 1.0000 F F F 1 0000 1 0000 l. 0000 1.0000 F F 6 1.0 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1 0000 1 0000 F F 1.0000 1.0000 1.0000 1.0000 1.2 1.1049 1.0964 1.0885 1. 0835 1. 0819 1.0865 1 0971 1 1087 1 1177
~ ~ 1.1246 1.1307 1 1371 1 1543
- l. 1042
~ ~ ~
8 1.4 1.0965 1.0894 1.0848 1.0834 1.0878 1.0976 1 1084 1.1168 ~ 1.1232 1.1289 1 1349 1. 1510
~
9 1.6 1 ~ 1034 1.0965 1 0901 ~ 1.0860 1. 0848 1.0889 1 0979 1 1078 1 1155
~ ~ ~ 1 1214 1 1265 1. 1320 l. 1467
~ ~
10 1.8 1. 1022 1.0962 1.0906 1.0871 1.0861 1.0899 1 0979 1.1068 1 1136
~ ~ 1.1189 1.1234 1.1283 1.1413 11 2.0 1.1007 1.0956 1 0909 ~ 1.0880 1.0872 1.0906 1.0976 1.1053 1 1112 1.1158 1.1197 1 1238 ' 1351 l.
~ ~
12 2.2 0990 1.0949 1.0911 1.0888 1.0882 1.0911 1.0971 1.1035 1.1085 1.1122 1.1154 1. 1187 l. 1280 13 2.4 1.0970 1.0939 1.0910 1.0893 1 0890 1. 0915
~ 1. 0964 1. 1015 1 1054~ 1. 1082 1. 1106 1 1130 1 199
~
'1 14 2.6 1 ~ 0948 1.0927 1.0907 1.0897 1. 0896 1.0916 1.0953 1.0991 1.1019 1.1038 1.1053 1.1066 1 1112 ~
15 2.8 1 ~ 0923 1. 0912 1 0902~ 1.0898 1. 0899 1.0915 1.0940 1 ~ 0965 1 ~ 0982 1.0993 1.1000 1. 1005 1 1030 ~
16 3.0 1.0896 1.0895 1 0895 ~ 1. 3896 1.0899 '.0911 1.0924 1.0936 1.0942 1.0943 1.0941 1. 0936 '0936 17 3.2 1.0870 1.0878 1.0886 1.0893 1.0898 1.0904 1.0905 1 0905 1.0905
~ 1.0904 1.0902 l. 0898 1.0893 18 3.4 1. 0848 1.0864 1.0879 1.0890 1.0895 1.0893 1.0884 1.0876 1.0875 1.0881 1.0892 1. 0904 1. 0921 19 3.6 1. 0837 1.0855 1 0873~ 1.0884 1 Oo88 1.0879
~ 1.0862 1.0852 1.0863 1.0891 1.0932 '.0982 '
- l. 1060 1193 106'.
20 3.8 1.0840 1.0855 1 0870 ~ 1. 0878 1.0879 1 0865 ~ 1 0847 1.0842 1 0864 1 0912 1 0978
~ ~ ~ ~
21 4 ' 1.0849 1.0858 1.0866 1. 0870 1.0869 1.0855 1.0841 1.0845 1.0879 1.0942 1.1027 1 1132 1. 1307
~
22 4.2 1.0858 1.0859 1 0861 ~ 1.0860 l. 0857 1.0847 1.0843 1 0859 1 0906 1.0982 1.1081
~ ~ l. 1201 1. 1409 23 4.4 1. 0865 1.0859 1.0855 l. 0851 '.0847 1 ~ 0842 1 0850 1 0878 1 0937 1 1023 1 1132
~ ~ ~ ~ ~ '265 l. 1500 24 4.6 1. 0870 1.0859 1.0849 l. 0841 1.0837 1 ~ 0838 1.0856 1.0896 1.0966 1.1061 1.1179 l. 1322 1. 1580 25 4.8 1.0874 1. 0856 1. 0841 1. 0831 1.0827 1.0833 1.0861 1.0912 1.0991 1.1094 1.1220 1. 1370 1649 26 5.0 1.0875 1.0854 1.0835 1.0823 1. 0819 1.0830 1.0865 1.0926 1.1012 1.1121 1.1254 l. 1411 1. 1705
' 1441 1. 1748 27 5.2 1.0873 1.0850 1.0829 1. 0816 1. 0812 1.0627 1.0868 1.0935 1 1027 1.1142 1.1279
~
28 5.4 1.0869 1.0843 1.0820 1.0806 1.0802 1.0820 1.0868 1.0941 1 1038 1 1156 1.1296
~ ~ l. 1461 1. 1776 29 5.6 1. 0861 1.0833 1.0808 1.0793 1.0790 1.0812 1.0865 1.0943 1 1043 1.1163 1.1304 1.1469 1. 17 BS
~
30 5 ' 1. 0851 1.0821 1.0794 1.0778 1. 0774 1.0799 1 0857 1 0939 1 1041 1 1161 1.1302 1. 1465 1.1785
~ ~ ~ ~
31 6.0 1.0838 1.0805 1.0776 1.0759 l. 0755 1.0783 1.0844 1.0930 1 1033 1.1152 1.1289 1.1449 1. 1765
~
32 6.2 1.0820 1 0785 1.0754
~ l. 0737 l. 0733 1.0762 1 ~ 0827 1 0914 1 ~ 1017
~ 1 ~ 1133 1 1266
~ '1421 1. 1728 33 6.4 1 ~ 0797 1.0761 1.0729 1. 0710 1.0706 1.0737 1 ~ 0804 1.0893 1 0993~ 1 ~ 1105 1.1233 1. 1379 l. 1675 34 6.6 1. 0770 1.0732 1.0698 1. 0679 1. 0675 1.0707 1.0776 1.0864 1 0961 ~ 1.1068 1.1188 l. 1325 1. 1605 35 6.8 1.0733 1.0699 1.0668 1.0650 1.0647 1.0678 1.0741 1.0824 1 0916 ~ 1.1016 1.1129 l. 1259 l. 1524 36 7.0 1.0727 1.0682 1.0641 1. 0616 1. 0611 1.0645 1.0717 1.0805 1 0892 ~ 1 0978 1 1071 1. 1175 1.1400
~ ~
37 7.2 l. 0741 1.0686 1.0635 1.0604 1. 0596 1.0635 1 0716 1.0808 1.0887
~ 1 ~ 0956 1 ~ 1023 1 ~ 1097 1. 1273 38 7.4 1. 0771 1.0710 1.0653 l. 0619 1.0611 1.0655 1.0744 1 0840 1 0913
~ ~ 1 ~ 0967 1.1013 1.1060 1. 1193 39 7 ' 1.0797 1.0735 1.0678 1. 0644 1.0636 1.0681 1.0770 1 0864 1 0932
~ ~ 1.0979 1.1016 1. 1052 1. 1166 40 7.8 1. 0818 1.0757 1 0700~ 1. 0666 1.0658 1.0703 1.0791 1.0882 1 ~ 0946 1.0986 1.1014 1. 1039 1. 1134 41 8.0 1.0836 1.0775 1.0718 1.0684 1.0676 1.0721 1.0808 1.0897 1.0955 1.0987 1.1005 1.1018 1. 1092 42 8' 1 ~ 0849 1 0789 1.0733
~ 1.0699 1.0691 1 ~ 0735 1 ~ 0820 1 0905
~ 1.0958 1 0983~ 1.0993 1.0996 1. 1050 43 8' 1. 0858 1.0798 1.0742 1. 0708 1. 0700 1.0744 1.0828 1.0909 1.0956 1.0973 1.0972 1.0963 1. 0995 44 8.5 1. 0861 1.0801 1.0746 1.0712 1. 0704 1.0748 1.0830 1.0908 1.0949 1.0956 1.0944 1. 0921 1,. 0928 45 8.8 1. 0861 1.0803 1.0748 1. 0715 1. 0708 1 0750 1.0831 1 0909 F ~ 1.0953 1.0967 1.0964 1.0951 1.0977 46 9.0 1. 0861 1.0802 1.0747 1. 0715 1. 0709 1.0758 1 0848 1.0936
~ 1.0987 1 1009F 1.1011 1. 1006 1. 1049 47 9.2 1.0875 1.0806 1.0744 1. 0708 1.0704 1.0771 1.0886 1.0994 1. 1055 1. 1074 1.1068 1. 1047 1 1079
- l. 0913
~
48 9 ' 1.0824 1.0742 1.0694 1.0688 1.0768 1.0910 1.1043 1 1116 1 1136 ~ ~ 1.1122 1. 1092 1. ll21 49 9.6 1.0955 1.0841 1.0736 1.0674 1.0663 1.0757 1.0929 1.1091 1 1178 1.1199 ~ 1.1181 1 ~ 1141 l. 1171 50 9.8 1.0995 1.0851 1.0717 1.0637 1.0620 1.0731 1.0939 1.1136 1.1240 1.1266 1 1243 ~ l. 1194 1. 1230 51 10. 0 1. 1033 1 0870 1 0719
~ ~ 1. 0627 1.0607 1.0728 1 0958 1 1176 1 1293 1 1322 1 1297
~ ~ ~ ~ ~ l. 1246 1. 1288 52 10. 2 1. 1068 1.0899 1.0742 1.0647 1.0626 1.0751 1.0987 1.1213 1.1334 1 1365 1.1340 ~ 1.1288 l. 1333 53 10.4 1.1099 1.0925 1 0764
~ 1.0665 1. 0643 1.0771 1.1013 1.1245 1.1370 1.1402 1.1378 l. 1326 l. 1375 54 10. 6 1. 1125 1.0947 1.0782 1. 0681 1. 0658 1 0787 1 1034 1 1270 1 1399 1 1434 1.1412
~ ~ ~ ~ ~ 1.1362 1. 1417 55 10 ' l. 1146 1.0965 1.0797 1.0694 1. 0671 1. 0801 1 1052 1. 1291 1. 1420 1 1454 1 1429
~ ~ ~ 1. 1376 1:1427 56 11. 0 1.0000 1.0000 1.0000 1. 0000 1.0000 1.0000 1.0000 1.0000 1 0000 1.0000 1.0000 F 1.0000 1.0000 57 11.2 1. 0000 1.0000 1.0000 1.0000 1.0000 1 0000 1.0000 1.0000 1 0000 1.0000 1.0000 F F 1. 0000 1.0000 58 11 4~ 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1 0000 1.0000 1.0000 1.0000 F 1.0000 1. 0000 59 11. 6 1. 0000 1.0000 1.0000 1.0000 1. 0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1. 0000 60 11 ~ 8 1. 0000 1.0000 1.0000 1.0000 1. 0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1. 0000 l. 0000 61 12.0 1. 0000 1.0000 1.0000 1. 0000 1. 0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1 ~ 0000 1.0000 The top and bottom 10%, of the core are ercluded per the Technical Specificationa.
Page 11 of 11