ML15253A913

From kanterella
Jump to navigation Jump to search
ACRS Full Committee - Corrections to the Aging Management Programs Table
ML15253A913
Person / Time
Site: Byron, Braidwood  Constellation icon.png
Issue date: 09/11/2015
From: Chris Miller
Division of License Renewal
To: Hackett E
Advisory Committee on Reactor Safeguards
Daily J, NRR/DLR,415-3873
References
DLR-15-0432
Download: ML15253A913 (9)


Text

UNITED STATES NUCLEAR REGULATORY COMMISSION WASHINGTON, D.C. 20555-0001 September 11, 2015 MEMORANDUM TO: Edwin M. Hackett, Executive Director Advisory Committee on Reactor Safeguards FROM: Christopher G. Miller, Director /RA by JMarshall for/

Division of License Renewal Office of Nuclear Reactor Regulation

SUBJECT:

ADVISORY COMMITTEE ON REACTOR SAFEGUARDS REVIEW OF THE BYRON-BRAIDWOOD NUCLEAR STATIONS LICENSE RENEWAL APPLICATION - CORRECTIONS TO THE TABLE OF AGING MANAGEMENT PROGRAMS FOR THE SAFETY EVALUATION REPORT During the ACRS full committee review for the Byron Station, Units 1 and 2, and Braidwood Station, Units 1 and 2, license renewal application (LRA) on September 10, 2015, the staff indicated that corrections had been identified for Table 3.0-1, Byron and Braidwood Aging Management Programs, in the staffs Safety Evaluation, Related to the License Renewal of Byron Station, Units 1 and 2, and Braidwood Station, Units 1 and 2 Safety Evaluation Report (SER) (ADAMS Accession No. ML15182A051). The purpose of this memorandum is to describe those changes in the table that will be incorporated in the NUREG version of the SER.

The staff identified three cases of aging management program (AMP) summaries in the table where corrections need to be made; these are shown in the red-line/strikeout version of the Table in Enclosure 1. Specifically:

  • The Water Chemistry AMP is changed in the SER Section (Disposition) column (column 6) to Consistent with exception, as opposed to stating Consistent.
  • The Flux Thimble Tube Inspection AMP is changed in LRA Initial Comparison to the GALL Report (column 4) to Consistent, as opposed to Consistent with exception and enhancements.
  • The Environmental Qualification (EQ) of Electric Components AMP is changed in the SER Section (Disposition) column (column 6) to consistent with enhancement as opposed to Consistent.

CONTACT: John Daily, NRR/DLR 301-415-3873

These summary designations in the Enclosure have been reviewed against the corresponding SER sections and verified that these accurately reflect the staffs evaluations. These corrections to Table 3.0-1 will be incorporated into the NUREG version of the SER, which also will include the ACRS letter. This NUREG will be prepared and published after the ACRS letter has been issued.

The staff also presented a table showing a summary of the AMPs reflecting which ones were evaluated by the staff as consistent, consistent with exceptions, consistent with enhancements, and consistent with enhancements and exceptions. The following table is provided to clarify the staff dispositions of the AMPs for each station:

Total AMPs in SER Staffs Byron AMPs Braidwood AMPs Disposition New 13 New Programs 10 (Fuse Holders Consistent 11 AMP is N/A for 13 New Programs Braidwood)

Consistent with 2 2 exceptions Existing 32 Existing Programs 5 (Includes Flux Thimble Consistent Tube 4 Inspection AMP for Byron)

Consistent with 20 20 32 Existing Programs enhancements Consistent with 1 1 exceptions 7 (Includes Flux Consistent with Thimble Tube enhancements 6 Inspection AMP and exceptions for Braidwood) 45 Total AMPs 45 AMPs 44 AMPs A disposition of a program as consistent means that it is consistent with the GALL Report (Revision 2), as amended by approved Interim Staff Guidance (ISGs). An enhancement is an addition to an existing program to bring it into consistency with the GALL Report (as amended by ISGs). An exception is a portion of a GALL Report recommendation (as amended by ISGs) that the applicant does not intend to implement. These are evaluated for acceptability by the staff.

The Electrical Fuse holders AMP is a new program, and is applicable only to Byron. Braidwood does not have any components to be managed by this AMP. Therefore, Byron has 45 total applicable AMPs, whereas Braidwood has 44 applicable. The total count of AMPs that have exceptions for Byron is 9; the total count for Braidwood is 10.

As stated in SER Section 3.0.3.2.11, the staff considered 2 instances of the applicants Fire Water System program to be exceptions to the recommendations of LR-ISG-2012-02. The staff determined that the exceptions were acceptable and that the program, with enhancements and exceptions, is adequate to manage the effects of aging for the fire water system.

The Flux Thimble Tube Inspection program is an existing program and has an exception and three enhancements applicable only to Braidwood; therefore for Braidwood it is consistent with enhancements and exceptions, and for Byron it is considered consistent. This is reflected in the count of consistent programs for Byron and the consistent with enhancements and exceptions count for Braidwood.

If you have any questions, please contact John Daily, the license renewal Safety Project Manager for this application, at 301-415-3873 or by email at John.Daily@NRC.Gov.

Docket Nos. 50-454, 50-455, 50-456, and 50-457

Enclosure:

Table 3.0-1 Byron and Braidwood Aging Management Programs (changes in redline/strikeout)

ML15253A913 *concurred via email OFFICE LA:DLR* PM:DLR:RPB1 BC:DLR:RPB1 D:DLR NAME YEdmonds JDaily YDiaz-Sanabria JMarshall for CMiller DATE 9/10/2015 9/10/2015 9/11/2015 9/11/2015 Table 3.0-1 Byron and Braidwood Aging Management Programs (changes in redline/strikeout)

LRA Initial New or LRA Comparison to SER Section Applicant AMP Existing GALL Report AMP(s)

Sections the GALL (Disposition)

Program Report American Society of XI.M1, ASME Mechanical Engineers 3.0.3.2.1 Consistent Section XI Inservice (ASME)Section XI A.2.1.1 (Consistent Existing with Inspection, Inservice Inspection, B.2.1.1 with enhancement Subsections IWB, Subsections IWB, enhancement)

IWC, and IWD IWC, and IWD 3.0.3.1.1 A.2.1.2 XI.M2, Water Water Chemistry Existing Consistent (Consistent B.2.1.2 Chemistry with exception) 3.0.3.2.2 Consistent (Consistent Reactor Head Closure A.2.1.3 with exception XI.M3, Reactor Head Existing with exception Stud Bolting B.2.1.3 and Closure Stud Bolting and enhancement enhancement)

A.2.1.4 XI.M10, Boric Acid 3.0.3.1.2 Boric Acid Corrosion Existing Consistent B.2.1.4 Corrosion (Consistent)

XI.M11B, Cracking of Nickel-Alloy Cracking of Components and Loss Nickel-Alloy of Material Due to Components and Loss Boric Acid-Induced of Material Due to A.2.1.5 Corrosion in Reactor 3.0.3.1.3 Boric Acid-Induced Existing Consistent B.2.1.5 Coolant Pressure (Consistent)

Corrosion in Reactor Boundary Coolant Pressure Components Boundary (Pressurized Water Components Reactors (PWRs) only)

Thermal Aging XI.M12, Thermal Embrittlement of Cast A.2.1.6 3.0.3.1.4 New Consistent Aging Embrittlement Austenitic Stainless B.2.1.6 (Consistent) of CASS Steel (CASS) 3.0.3.2.3 A.2.1.7 Consistent XI.M16A, PWR Vessel PWR Vessel Internals New (Consistent B.2.1.7 with exception Internals with exception) 3.0.3.1.5 XI.M17, Flow-Accelerated A.2.1.8 (Consistent Existing Consistent Flow-Accelerated Corrosion B.2.1.8 with Corrosion enhancement)

ENCLOSURE

LRA Initial New or LRA Comparison to SER Section Applicant AMP Existing GALL Report AMP(s)

Sections the GALL (Disposition)

Program Report 3.0.3.2.4 Consistent A.2.1.9 XI.M18, Bolting (Consistent Bolting Integrity Existing with B.2.1.9 Integrity with enhancements enhancements) 3.0.3.2.5 Consistent (Consistent A.2.1.10 with exception XI.M19, Steam Steam Generators Existing with exception B.2.1.10 and Generators and enhancements enhancements) 3.0.3.2.6 Consistent Open-Cycle Cooling A.2.1.11 XI.M20, Open-Cycle (Consistent Existing with Water System B.2.1.11 Cooling Water System with enhancement enhancements) 3.0.3.2.7 Consistent XI.M21A, Closed Closed Treated Water A.2.1.12 (Consistent Existing with Treated Water Systems B.2.1.12 with enhancements Systems enhancements)

Inspection of XI.M23, Inspection of 3.0.3.2.8 Overhead Heavy Load Consistent Overhead Heavy Load A.2.1.13 (Consistent and Light Load Existing with and Light Load B.2.1.13 with (Related to Refueling) enhancements (Related to Refueling) enhancements)

Handling Systems Handling Systems 3.0.3.2.9 Consistent (Consistent Compressed Air A.2.1.14 with exception XI.M24, Compressed Existing with exception Monitoring B.2.1.14 and Air Monitoring and enhancement enhancement) 3.0.3.2.10 Consistent A.2.1.15 XI.M26, Fire (Consistent Fire Protection Existing with B.2.1.15 Protection with enhancements enhancements) 3.0.3.2.11 Consistent (Consistent A.2.1.16 XI.M27, Fire Water Fire Water System Existing with with exceptions B.2.1.16 System enhancements and enhancements) 3.0.3.2.12 Aboveground Metallic A.2.1.17 Consistent XI.M29, Aboveground New (Consistent Tanks B.2.1.17 with exception Metallic Tanks with exception) 3.0.3.2.13 Consistent A.2.1.18 XI.M30, Fuel Oil (Consistent Fuel Oil Chemistry Existing with B.2.1.18 Chemistry with enhancements enhancements)

LRA Initial New or LRA Comparison to SER Section Applicant AMP Existing GALL Report AMP(s)

Sections the GALL (Disposition)

Program Report 3.0.3.2.14 Consistent Reactor Vessel A.2.1.19 XI.M31, Reactor (Consistent Existing with Surveillance B.2.1.19 Vessel Surveillance with enhancement enhancements)

A.2.1.20 XI.M32, One-Time 3.0.3.1.6 One-Time Inspection New Consistent B.2.1.20 Inspection (Consistent)

A.2.1.21 XI.M33, Selective 3.0.3.1.7 Selective Leaching New Consistent B.2.1.21 Leaching (Consistent)

One-Time Inspection XI.M35, One-Time of ASME Code A.2.1.22 Inspection of ASME 3.0.3.1.8 New Consistent Class 1 Small Bore B.2.1.22 Code Class 1 Small (Consistent)

Piping Bore-Piping External Surfaces XI.M36, External Monitoring of A.2.1.23 Surfaces Monitoring of 3.0.3.1.9 New Consistent Mechanical B.2.1.23 Mechanical (Consistent)

Components Components 3.0.3.1.10 Consistent (Consistent Flux Thimble Tube A.2.1.24 with exception XI.M37, Flux Thimble Existing with exception Inspection B.2.1.24 and Tube Inspection and enhancements enhancements)

Inspection of Internal XI.M38, Inspection of Surfaces in Internal Surfaces in A.2.1.25 3.0.3.1.11 Miscellaneous Piping New Consistent Miscellaneous Piping B.2.1.25 (Consistent) and Ducting and Ducting Components Components Lubricating Oil A.2.1.26 XI.M39, Lubricating 3.0.3.1.12 Existing Consistent Analysis B.2.1.26 Oil Analysis (Consistent)

Monitoring of XI.M40, Monitoring of 3.0.3.1.13 Neutron-Absorbing A.2.1.27 Neutron-Absorbing (Consistent Existing Consistent Materials Other than B.2.1.27 Materials Other than with Boraflex Boraflex enhancement)

Consistent 3.0.3.2.15 with XI.M41, Buried and (Consistent Buried and A.2.1.28 Existing exceptions Underground Piping with exceptions Underground Piping B.2.1.28 and and Tanks and enhancements enhancements) 3.0.3.2.16 Consistent XI.S1, ASME ASME Section XI, A.2.1.29 (Consistent Existing with Section XI, Subsection IWE B.2.1.29 with enhancement Subsection IWE enhancements)

LRA Initial New or LRA Comparison to SER Section Applicant AMP Existing GALL Report AMP(s)

Sections the GALL (Disposition)

Program Report 3.0.3.2.17 Consistent XI.S2, ASME ASME Section XI, A.2.1.30 (Consistent Existing with Section XI, Subsection IWL B.2.1.30 with enhancements Subsection IWL enhancements)

Consistent 3.0.3.2.18 with XI.S3, ASME (Consistent ASME Section XI, A.2.1.31 Existing exceptions Section XI, with exceptions Subsection IWF B.2.1.31 and Subsection IWF and enhancements enhancements) 10 CFR Part 50, A.2.1.32 XI.S4, 10 CFR 3.0.3.1.14 Existing Consistent Appendix J B.2.1.32 Part 50, Appendix J (Consistent) 3.0.3.2.19 Consistent A.2.1.33 (Consistent Masonry Walls Existing with XI.S5, Masonry Walls B.2.1.33 with enhancements enhancements) 3.0.3.2.20 Consistent A.2.1.34 XI.S6, Structures (Consistent Structures Monitoring Existing with B.2.1.34 Monitoring with enhancements enhancements)

XI.S7, RG 1.127, RG 1.127, Inspection Inspection of 3.0.3.2.21 of Water-Control Consistent A.2.1.35 Water-Control (Consistent Structures Associated Existing with B.2.1.35 Structures Associated with with Nuclear Power enhancements with Nuclear Power enhancements)

Plants Plants XI.S8, Protective 3.0.3.2.22 Protective Coating Consistent A.2.1.36 Coating Monitoring (Consistent Monitoring and Existing with B.2.1.36 and Maintenance with Maintenance Program enhancements Program enhancements)

XI.E1, Insulation Insulation Material for Material for Electrical Electrical Cables and Cables and Connections Not Connections Not Subject to A.2.1.37 3.0.3.1.15 New Consistent Subject to 10 CFR 50.49 B.2.1.37 (Consistent) 10 CFR 50.49 Environmental Environmental Qualification Qualification Requirements Requirements

LRA Initial New or LRA Comparison to SER Section Applicant AMP Existing GALL Report AMP(s)

Sections the GALL (Disposition)

Program Report XI.E2, Insulation Insulation Material for Material for Electrical Electrical Cables and Cables and Connections Not Connections Not Subject to Subject to 10 CFR 50.49 A.2.1.38 3.0.3.1.16 New Consistent 10 CFR 50.49 Environmental B.2.1.38 (Consistent)

Environmental Qualification Qualification Requirements Used in Requirements Used in Instrumentation Instrumentation Circuits Circuits XI.E3, Inaccessible Inaccessible Power Power Cables Not Cables Not Subject to Subject to 10 CFR 50.49 A.2.1.39 3.0.3.1.17 New Consistent 10 CFR 50.49 Environmental B.2.1.39 (Consistent)

Environmental Qualification Qualification Requirements Requirements 3.0.3.2.23 Consistent A.2.1.40 XI.E4, Metal Enclosed (Consistent Metal Enclosed Bus Existing with B.2.1.40 Bus with enhancements enhancements)

Fuse Holders (Byron A.2.1.41 3.0.3.1.18 New Consistent XI.E5, Fuse Holders Only) B.2.1.41 (Consistent)

Electrical Cable XI.E6, Electrical Cable Connections Not Connections Not Subject to Subject to A.2.1.42 3.0.3.1.19 10 CFR 50.49 New Consistent 10 CFR 50.49 B.2.1.42 (Consistent)

Environmental Environmental Qualification Qualification Requirements Requirements 3.0.3.2.24 Consistent A.3.1.1 X.M1, Fatigue (Consistent Fatigue Monitoring Existing with B.3.1.1 Monitoring with enhancements enhancements) 3.0.3.2.25 Consistent X.S1, Concrete Concrete Containment A.3.1.2 (Consistent Existing with Containment Tendon Tendon Prestress B.3.1.2 with enhancement Prestress enhancement) 3.0.3.1.20 Environmental X.E1, Environmental A.3.1.3 (Consistent Qualification (EQ) of Existing Consistent Qualification (EQ) of B.3.1.3 with Electric Components Electrical Components enhancement)