ML14300A180
| ML14300A180 | |
| Person / Time | |
|---|---|
| Issue date: | 11/16/2020 |
| From: | NRC/OCIO/GEMSD/IMSB |
| To: | |
| References | |
| Download: ML14300A180 (6) | |
Text
OVERALL PROCESS PARAMETERS INTERNATIONAL ATOMIC ENERGY AGENCY DEPARTMENT OF SAFEGUARDS AND INSPECTION CONFIDENTIAL WHEN COMPLETED DESIGN INFORMATION QUESTIONNAIRE
- IAEA USE ONLY CONFIDENTIAL N-75 (11-2017) 14.
ISOTOPIC ENRICHMENT PLANTS DATE:
FACILITY DESCRIPTION (indicating all process stages, storage areas and feed, product, tail, and waste points) 13.
GENERAL FLOW DIAGRAM(S) ATTACHED UNDER REFERENCE NUMBERS:
3 (CONTINUED)
ISOTOPIC ENRICHMENT PLANTS FLOW SHEET(S) FOR NORMAL OPERATION ATTACHED UNDER REFERENCE NUMBERS:
PROCESS DESCRIPTION (identifying sampling and key measurement points; MBAs; inventory locations) 15.
MTUSW/annum MW ANTICIPATED ANNUAL THROUGHPUT (in the form of a forward programme, indicating the proportion of various feeds and products) 16.
DESIGN CAPACITY (throughput and energy consumption)
- Questions which are not applicable may be left unanswered.
The "Confidential" marking on this form is for IAEA purposes only. It indicates that the IAEA considers the information in the completed form to be
'safeguards confidential' and is not to be confused with any U.S. security classification.
Estimated burden per response to comply with this mandatory collection request: 360 hours0.00417 days <br />0.1 hours <br />5.952381e-4 weeks <br />1.3698e-4 months <br />.
NRC is required to collect this information for reporting to IAEA from facility licensees appearing on the U.S. Eligible List. Send comments regarding burden estimate to the Information Services Branch (T-2 F43), U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001, or by e-mail to Infocollects.Resource@nrc.gov, and to the Desk Officer, Office of Information and Regulatory Affairs, NEOB-10202, (3150-0056), Office of Management and Budget, Washington, DC 20503. If a means used to impose an information collection does not display a currently valid OMB control number, the NRC may not conduct or sponsor, and a person is not required to respond to, the information collection.
APPROVED BY OMB: NO. 3150-0056 EXPIRES: 08/31/2020
NUCLEAR MATERIAL DESCRIPTION AND FLOW 17.
ISOTOPIC ENRICHMENT PLANTS DATE:
4 CONFIDENTIAL MAIN MATERIAL DESCRIPTION Chemical and Physical Form i)
FEED PRODUCT Throughput and Enrichment Ranges (for normal flow sheet operation indicating if blending and/or recycling takes place) ii) iii) Batch Size/Flow Rate and Campaign Period iv)
TAILS Maximum Capability as Concentration of Top Product (Nat. U feed) v)
Storage Inventory (indicating any change with throughput)
Frequency of Receipt or Shipment vi)
Source and Form (Indicating major contributors; liquid or solid; range of constituents; enrichment range; include contaminated equipment) i)
- 18. WASTE MATERIAL Storage Inventory Range, Method and Frequency of Recovery/Disposal ii)
N-75 (11-2017)
NUCLEAR MATERIAL DESCRIPTION AND FLOW ISOTOPIC ENRICHMENT PLANTS DATE:
5 CONFIDENTIAL CONTAINER AND STORAGE AREA DESCRIPTION 19.
SEPARATE NOTE TO BE ATTACHED.
Describe for feeds, products, tails, and wastes: the type and size of storage and shipping containers and packaging used, (including nominal capacity and capacity for normal operation, and type of material); method of storage or packing, filling and emptying procedures (include time cycle); shielding; and any special identification features.
MEASURED DISCARDS AND RETAINED WASTE i) As % of Input 20.
INVENTORY 21.
i) In-Process (within plant and equipment during normal operation; indicate quantity form and main locations and any significant change with time or throughput)
Other Locations (quantity, form and location of inventory not already specified) ii)
N-75 (11-2017)
PROTECTION AND SAFETY MEASURES PLANT MAINTENANCE SEPARATE NOTE TO BE ATTACHED MAINTENANCE, DECONTAMINATION, CLEAN-OUT 22.
DATE:
BASIC MEASURES FOR PHYSICAL PROTECTION OF NUCLEAR MATERIAL 23.l 6
CONFIDENTIAL ISOTOPIC ENRICHMENT PLANTS Describing plans and procedures and defining all sampling and key measurement points associated with:
i) ii) iii)
Normal Plant Maintenance; Plant and Equipment Decontamination and Subsequent Nuclear Material Recovery; Plant and Equipment Clean-out Including Means of Ensuring Vessels Are Empty.
SPECIFIC HEALTH AND SAFETY RULES FOR INSPECTOR COMPLIANCE (if extensive, attach separately) 24.
N-75 (11-2017)
NUCLEAR MATERIAL ACCOUNTANCY SPECIMEN FORMS USED IN ALL PROCEDURES ATTACHED UNDER REFERENCE NUMBERS:
SYSTEM DESCRIPTION Give a description of the nuclear material accounting system, the method of recording and reporting accountancy data and establishing material balances, procedures for account adjustment after plant inventory, mistakes, etc., under the following headings:
i) General 25.
DATE:
7 CONFIDENTIAL ISOTOPIC ENRICHMENT PLANTS N-75 (11-2017)
NUCLEAR MATERIAL ACCOUNTANCY 25.
ISOTOPIC ENRICHMENT PLANTS DATE:
8 CONFIDENTIAL SYSTEM DESCRIPTION (Continued)
Receipts (including method of dealing with shipper/
receiver differences and subsequent account corrections) ii)
Shipments (product and waste) iii)
N-75 (11-2017)
NUCLEAR MATERIAL ACCOUNTANCY 25.
ISOTOPIC ENRICHMENT PLANTS DATE:
9 CONFIDENTIAL SYSTEM DESCRIPTION (Continued)
LIST OF MAJOR ITEMS OF EQUIPMENT REGARDED AS NUCLEAR MATERIAL CONTAINERS ATTACHED UNDER REFERENCE NUMBERS:
Physical Inventory (frequency, procedures, estimated distribution) iv)
Measured Discards and Retained Waste v) vi)
Operation Records and Accounts (Including method of adjustment or correction and place of preservation and language)
N-75 (11-2017)
NUCLEAR MATERIAL ACCOUNTANCY FOR EACH KEY MEASUREMENT POINT IDENTIFIED UNDER QS. 14 and 22, GIVE THE FOLLOWING*
26.
10 CONFIDENTIAL i)
Identification Chemical and Physical Form of Material ii) iv)
Measurement/Analytical Method and Equipment Used
- COMPLETE PAGE 9 AND PAGE 10 FOR EACH KMP Sampling Procedure and Equipment Used iii)
ISOTOPIC ENRICHMENT PLANTS DATE:
Source and Level of Random and Systematic Errors (weighing, volume, sampling, analytical)
Method of Converting Source Data to Batch Data (standard calculative procedures, constants and empirical relationships) v)
vi)
N-75 (11-2017)
NUCLEAR MATERIAL ACCOUNTANCY AND CONTROL FOR EACH KEY MEASUREMENT POINT IDENTIFIED UNDER QS. 14 and 22, GIVE THE FOLLOWING*
26.
11 CONFIDENTIAL vii)
Calculative and Error Propagation Technique Technique and Frequency of Calibration of Equipment Used viii) ix)
Programme for the Continuing Appraisal of the Accuracy of Weight, Volume, Sampling Techniques and Measurement Methods
- COMPLETE PAGE 9 AND PAGE 10 FOR EACH KMP ISOTOPIC ENRICHMENT PLANTS DATE:
Programme for Statistical Evaluation of Data from (viii) and (ix) x)
N-75 (11-2017)
OPTIONAL INFORMATION NUCLEAR MATERIAL ACCOUNTANCY AND CONTROL OVERALL LIMIT OF ERROR Describe procedures to combine individual measurement error measurements to obtain the overall limit of error for:
27.
12 CONFIDENTIAL i)
S/R Difference Book Inventory ii) iv)
MUF Physical Inventory iii)
ISOTOPIC ENRICHMENT PLANTS DATE:
OPTIONAL INFORMATION (that the operator considers relevant to safeguarding the facility) 28.
Signature of Responsible Officer:
Date:
N-75 (11-2017)