Text

CFR 50.55a Request 2-RR-7, Re-Categorization of Unit 2 Steam Generator Nozzle to Safe-End Welds. Part 2 of 3
	ML13365A308
Person / Time
Site:	Point Beach
Issue date:	12/27/2013
From:	Meyer L; Point Beach
To:	; Office of Nuclear Reactor Regulation
Shared Package
ML13365A310	List: ML13365A307; ML13365A308; NRC 2013-0113, CFR 50.55a Request, Relief Request 2-RR-7, Re-Categorization of Unit 2 Steam Generator Nozzle to Safe-End Welds. Part 3 of 3;
References
	NRC 2013-0113
	Download: ML13365A308 (45)
	v • d • e

ENCLOSURE RELIEF REQUEST 2-RR-7 NEXTERA ENERGY POINT BEACH, LLC POINT BEACH NUCLEAR PLANT UNIT 2 REQUEST FOR WELD RE-CATEGORIZATION ASME Code Component(s) Affected Code Class:

Drawing Numbers:

1 ISI-2120, ISI-2121 Table 1 Examination Code Case Description Category Inspection Item N-770-1 A-2 RC-34-MRC-AII-05, Safe-End to "A" Inlet Nozzle N-770-1 B

RC-36-MRCL-AII-01A, "A" Outlet Nozzle to Safe-End N-770-1 A-2 RC-34-MRC-BI-05, Safe-End to "B" Inlet Nozzle N-770-1 B

RC-36-MRCL-BII-01A, "B" Outlet Nozzle to Safe-End

Applicable Code Edition and Addenda

NextEra Energy Point Beach, LLC (NextEra) is currently in the Fifth Ten-Year inservice inspection (ISI) interval. The current ISI program is based on the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code,Section XI, 2007 Edition with Addenda through 2008.

Applicable Code Requirements Code Case N-770-1, "Alternative Examination Requirements and Acceptance Standards for Class 1 PWR Piping and Vessel Nozzle Butt Welds Fabricated with UNS N06082 or UNS W86182 Weld Filler Material With or Without Application of Listed Mitigation ActivitiesSection XI, Division 1."

ASME Section Xl, Division 1, "Rules for Inservice Inspection of Nuclear Power Plant Components" Reason for the Reauest NextEra is requesting that the affected welds listed above be re-categorized due to the imposed rulemaking changes in 10 CFR 50.55a [FR36232 Volume 76, Number 119], issued June 21, 2011. The rulemaking imposed the use of ASME Code Case N-770-1 with conditions specified in 10 CFR 50.55a(g)(6)(ii)(F) specifically for Class 1 piping and nozzle dissimilar metal butt welds. As stated within 10 CFR 50.55a(g)(6)(ii)(F)(2):

Page 1 of 3

"...all other butt welds that rely on Alloy 82/182 for structural integrity shall be categorized as Inspection Items A-i, A-2, or B until the NRC staff has reviewed the mitigation and authorized an alternative Code Case Inspection item for the mitigated weld..."

Proposed Alternative and Basis for Use Pursuant to 10 CFR 50.55a(g)(6)(ii)(F), re-categorization is requested for the Unit 2 replacement steam generator (SG) inlet and outlet nozzle safe-end welds. Based upon the manufacturing process of the SGs, chemistry analysis of archived weld samples from construction, and automated ultrasonic and eddy current examination of all four (4) welds, NextEra is requesting that all four welds be re-categorized as Inspection Item G, "Uncracked Butt Weld Mitigated With an Inlay."

Point Beach Nuclear Plant (PBNP) Unit 2 has two (2) Delta 47 (A47) SGs which were installed as replacements in fall 1996 (U2R22). The SGs are primarily carbon steel with the channel head and nozzles clad with austenitic stainless steel. The SG nozzle to safe-end weld is composed of Alloy 82/182 buttering and Alloy 82 weld material. The inside surface of the weld and adjacent base material was clad with Alloy 52 at the factory during fabrication (Attachment 1). These welds received ASME Section III examinations (liquid penetrant and radiography) prior to installation. In addition, the ASME Section XI pre-service examinations (liquid penetrant and ultrasonic examinations) were performed prior to installation at PBNP.

The subject welds received ASME Section Xl Appendix VIII-demonstrated, automated phased array ultrasonic (PA-UT) examinations as well as ASME Section XI Appendix IV-demonstrated automated eddy current (ECT) examinations in November 2012 delivered with remote tooling from the inside surface (ID). Neither the PA-UT nor the ECT recorded indications on any of the four welds. The use of both ECT and PA-UT techniques ensured that neither surface-breaking flaws nor sub-surface flaws were located within the lower 1/3t of the weld which could propagate through the Alloy 52 cladding material into the Alloy 82 weld material.

NextEra is providing a copy of the U2R32 ISI examination reports (Attachment 2), as well as a copy of the archive weld sample chemistry report (Attachment 3).

In accordance with Code Case N-770-1, the re-categorization of these welds to a "G" category will require NextEra to add these welds to the scheduled ISI Program plan and perform a qualified volumetric and surface examination of twenty-five percent of the weld population once each inspection interval. This means that one (1) of the SG safe-end to inlet nozzle welds will be examined in approximately 2022.

Page 2 of 3

Duration of Proposed Alternative The proposed alternative categorization for the Unit 2 SG nozzle dissimilar metal welds (inlet and outlet) will be a permanent change to the PBNP ISI Program for the duration of the extended license.

Precedents None Page 3 of 3 Excerpt from Westinghouse Drawing 6147E62 Weld Detail Co.

WI 0

fa i.-

U 0I-0 z

In 02 010 WI Ui ala U

WI 4

IL U,

In in Wj I-0 W

V S"a Sal I-02 I-

2 e~w

.j U

Page 1 of 2 Excerpt from Westinghouse Drawing 6147E62 Alloy 52 Cladding Detail i'W us

'a.

w w

I.

o a

a

=

w lb 4

0 i

Page 2 of 2 Automated Ultrasonic and Eddy Current Reports U2R32 - November, 2012 74 pages follow

wI HI 11-1 Southwest Technologies E=xamination Summary Record, m

~Site: Point Beach Nuclear Plant Unit 2 Utility: NextEra Energy O0utace: U21132 ISummary Sheet No. 00100 System: Steam Generator Une Subassembly: Safe End to "A" SG In Noz Identification: RC-34-MRCL-AI-05 NOE NIE CalioratlonS Exam Sheet Method ProcIRev/Chg/ICN Examination heet Nos.

No.

I NRI Otherl Remarks AUT ISwT-PDI-AUTI 1/2/0/1 UT Probe I (60M8) 110002 1 -2 X

UT TWD & AVVY Exam AUT ISwT-PDI-AUT11/2/0i1 UT Probe 2 (60-88) 110002 1-2 X

UT TWD & AWY Exam AUT ISwT-PDI-AUT1 1/2/0il UT Probe I (60-88")

110001 3-5 X

UT CW & CCW Exam AUT ISwT-PDI-AUT1 1/2/0/1 UT Probe 2 (60-88")

110001 3-5 X

UT CW & CCW Exam AET ISwT-PDI-AET3/2I/01 ET Probe 1 ET03-PTB-002 3-5 X

Eddy Current Exam AET ISwT-PDI-AET3/2/0/0 ET Probe 2 ETO3-PTB-002 3-5 X

Eddy Current Exam Examination Summary:

This weld was examined from the inside surface using SG-NExT, T-Ill, & MS5800 examination equipment.

The examination coverage was 100%.

Prepared By: Steven J To~i Signature:

Date:

17.

l ISwT Proje6t lanager Reviewed By:

Ap

.r Reviewed By:.

Signature:

I JA..

Date:/I"2. -

Signatur9:

-j ZDate:

NextEra Energy Polnt each ANII 1t1 W 1/2L1

"IH I

. IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant :

Point Beach Unit 2 Weld Identification: RC-34-MRCL-A1-05 Pro/Rev/ChWICN:

ISwT-PDI-AUTI 1/2/0/1 Examination No.:

ID-I Project No.:

12-0301 Weld

Description:

SE-to-A S/G In Noz 0*-185°)

Device Configuration:

136-00045 Mod.Conf.:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) I SNT Level:

Jeremy Howe It 14 Nov. 2012 Start End Start End

_1505 1542 94.4 94.4

-=-- :

" :¢: -'

:,. -.z i** :.", :. "*:.:d' uis',

. '* oj *!,*

. * *,,,: * : :: :.. *. :* : ;:,. * *=. * : :. :* a t~ c( ' ' -.,: *= = _ :.,at

a.

i, o n

.*,A Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SG-NExT Lower Limit 70.75 70.75 Lower Limit 0.00 0.00 Beam Direction:

Twd/Awy Scan:

X Rotator Drive Upper Limit 79.15 79.22 Upper Limit 49.77 49.77 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed:

2.0 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

57 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A Elevation/Nozzle C/i N/A Master Acquisition File:

DMPipe_ID_90_AWY 270_TWD Skew.acq Calibration Records: Examination Notes:

Probe Channel /Angle(s)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe I 1-(60-88-L) 900

+ 69.92(in)

- 1.52(in) 110002 Circumference 96.86" Probe 2 2-(60-88OL) 2700

+ 59.22(in)

- 2.90(in) 110002 Examination Remarks:

Probe 3 3-(0°Profdometry) 00

+ 0.00(in)

+ 0.00(in) 110002 N/A N/A N/A N/A N/A N/A Dta,"alysis s-Increment & Scan Positions Actual Recordable Indications Analyst Remarks Increment Position Scan Position Yes No N/A

Attachment:

Scan No(s)

Start Stop Start Stop Channel 1 El El El 1-57 70.75 79.22 0.00 49.77 Probe 1 Channel 2 El 21 Dl El Yes [2 No Channel 3 El El ED Further Evaluation Channel 1 El E

El

. Required:

Probe 2 Channel 2 El El El Channel3 El El El E Yes El No Channel 1 El El El Archive Media:

Probe 3 Channel 2 El El El Channel 3 El 11 El El External Hard Drive

_ET Probe I Channel 1-2 El El E_

JET Probe 2 Channel 3-4 El El El El CD-ROM I

N/A N/A El El El DVD-ROM__

Analyst I SNT Level I Date:

Jesse R. Delgado / II / 14 Nov. 2012,--q A

ISWTFORMNo. UrT50 (Rev. 1Ill)

ID-i SG A Safe-End to Inlet Nozzle (Away Towards)

"11Ove4Y Pant Layots PrýMC R

ocmwm TOON Wfidow ft 1

Ch. I AM1~

to LM: AScMnPO VC.Togf i(C) LDt*Lain C2 qo~ki:a OASCM 0 ZE-TEC I Seumkw01 UnRnN.imMi LD*W VCEI4~)

LM)~

t~v~cPO VC-En(0)

UI*:O'2 falk.ASMPFO I72E "IrikiBmI)

F 35 S4.3S Sl 2iha!2 13Smr

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification: RC-34-MRCL-AI-05 Pro/Rev/Chg/ICN:

ISwT-PDI-AUT 11/2/0/1 Examination No.:

ID-I RR Project No.:

12-0301 Weld

Description:

SEto-A S/GinNoz(00 -185)

Device Confguration: 136-00045 Mod.Conf.:

138-00032 Scan Path Drawing: 134-00079 Exam Date I

Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level:

Jeremy Howe H 14 Nov. 2012 Start End Start End 1720 1800 94.4 94.4 Data Acquisition:

Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller, SG-NExT Lower Limit 70.75 70.75 Lower Limit 0.00 0.00 Beam Direction:

Twd/Awy Scan:

X Rotator Drive Upper Limit 79.15 79.22 Upper Limit 49.77 49.77 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed:

2.0 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

57 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A

_Elevation/Nozzle CA N/A Master Acquisition File:

DM_Pipe_1D90 AWY_270_TWDSkew.acq Calibration Records: Examination Notes:

Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe I 1-(60-88-L) 90-

+ 69.92(m)

- 1.52(in) 110002 Circumference 96.86" Probe 2 2-(60-88-L) 270*

+ 59.22(in)

- 2.90(m) 110002 Examination Remarks:

Probe 3 3-(O0Profdometry) 00

+ 0.00(in)

+ 0.00(in) 110002 N/A N/A N/A N/A N/A N/A Da~ta Analysis___________

Increment & Scan Positions Actual Recordable Indications Analyst Remarks S

No.(s)

Increment Position Scan Position Yes No N/A

Attachment:

Sa No.s Start Stop Start Stop Channel 1 0]

[a__

1-57 70.75 79.22 0.00 49.77 Probe 1 Channel 2 0l 0

El El Yes 0 No Channel 3 0

0 El Further Evaluation Channel 1 0

El Required:

Probe 2 Channel 2 0l El_

_ Channel 3 El 0

El EYes El No Channel 1 El El 0

Archive Media:

Probe 3 Channel 2 El 0

2 Channel 3 El El 0

0 External Hard Drive ETProbe I Channel 1-2 El El 0_

_ETProbe2 Channel3-4 El E1 l

]

El CD-ROM I

N/A N/A El El F

DVD-ROM Analyst / SNT Level / Date:

Jesse R. Delgado l

/ 14 Nov. 201

,,*V ISWT FORM Ne. uTrs0 (Rev. ill1)

IHI..

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification: RC-34-MRCL-AI-05 Pro/Rev/Chz/ICN:

ISwT-PDI-AUTI 1/2/01 Examination No.:

ID-2 Project No.:

12-0301 Weld

Description:

SE-to-AS/GInNoz 1800-365*)

Device Configuration: 136-00045 Mod.Conf.:

138-00032 Scan Path Drawinl: 134-00079 Exam Date Examination Time Surface Tern rature OF Data Acquisition Operator (s) /.SNT Level:

Jeremy Howe D C 14 Nov. 2012 Start R

oEnd Start S

End 1551 1630 94.4 94.4 SScan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limit 71.56 71.56 Lower Limit 48.43 48.43 Beam Direction:

Twd/Awy Scan:

X Rotator Drive Upper Limrit 79.15 79.22 Upper Limit 98.20 98.20

_Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed:

2.0 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

52 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A Elevation/Nozzle C/I N/A Master Acquisition File:

DM_PipeID 90 AWY 270 TWDSkew.acq Calibration Records: Examination Notes:

Probe Channel/Angles)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe 1 1-(60-88-L) 900

+ 69.92(in)

- 1.52(in) 110002 Circumference = 96.86" Probe 2 2-(60-88-L) 2700

+ 59.22(in)

- 2.90(in) 110002 Examination Remarks:

Probe 3 3-(0"Profilometry) 0°

+ 0.00(in)

+ 0.00(in) 110002 N/A N/A N/A N/A N/A N/A Data Analysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks Increment Position Scan Position Yes No N/A

Attachment:

Scan No.(s)

Start Stop Start Stop Channel I l

2 0

1-52 71.56 79.22 48.43 98.20 Probe I Channel 2 0

2]

El El Yes El No Channel 3 El El El Further Evaluation Channel I El 2]

El Required:

Probe 2 Channel 2 p'

Channel 3 El El E]

M Yes G1 No Channel I Archive Media Probe 3 Channel 2

[

El Channel 3 El 0

ID

2) External Hard Drive ET Probe I Channel 1-2 0l El El ET Probe 2 Channel 3-4 El El El El CD-ROM N/A N/A El El El DVD-ROM Analyst ISNT Level IDate:

Jesse R. Delgado / III / 14 Nov. 2012 ýýq

.swT FORM No. UT 50 owev. VI1i)

ID-2 SG A Safe-End to Inlet Nozzle (Away Towards)

Fie Oveiatt Pmwe Layoub ts Poc Todis W#*wO Vow~ Moo

~~I~~~I~~iUI~~~~JI

\\1010IIIE i fj l~T'TiI~

9IIII10P s

101[i n

ZETECi:ýtl A~gok:AmOm CWgDi*C2M~o~m-~aP O S000 1 0 t

100L 4

I e i:C 112

.140 i

71,i So -VCC-S 8)Lg oLkv C aMwp ta~.AoP WtoLi: ASC~PO mm. ko I

b 000 t

0 I

n101 4

M.M.M1

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification: RC-34-MRCL-AI-05 Pro/RevIChg/ICN:

ISwT-PDI-AUTI 1/2/0/1 Examination No.:

ID-2 Partial Project No.:

12-0301 Weld

Description:

SE-to-AS/GInNoz.(80o-365*)

Device Configuration:

136-00045 Mod.Conf.:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level:

Jeremy Howe DCI 14 No(.

Rslto Start End Start S

End 10338 0342,9.

94.4 Scan Controller Parameters Increment Axis Planned Actual Stan Axis Planned Actual Positional Parameters Controller.

SG-NEXT Lower Limit 70.75 70.75 Lower Limit 48.43 48.43 Beam Direction:

Twd/Awy Scan:

X Rotator Drive Upper Limit 71.95 7.5 Upper Limit 98.20 98.20 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed:

2.0 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

9 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A Elevation/Nozzle C/I N/A Master Acquisition File:

DMPipe ID 90 AWY_270_TWDSkew.acq Calibration Records: Examination Notes:

Probe Channel /Angl(s)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe I 1-(60-88-L) 90°

+ 69.92(in)

. 1.52(in) 110002 Circumference 96.86" Probe 2 2-(60-88°L) 2700

+ 59.22(in)

- 2.90(in) 110002 Examination Remarks:

Probe 3 3-(0"Profilometry) 00

+ 0.00(m)

+ 0.00(in) 110002 N/A N/A N/A N/A N/A N/A Data Analysis Increment & Scan Positions Actual Recordable Indications Anal.st Remarks S

No.(s)

Increment Position Scan Position Yes No N/A

Attachment:

s tart Stop Start Stop Channel 1 0

0 E-1-9 70.75 71.95 48.43 98.20 Probe 1 Channel 2 0

03 El 0 Yes [0 No Channel 3 El 0]

E Further Evaluation Channel I El 2

El Required:

Probe 2 Channel 2 C1 El El

_ Channel 3 El 0

]

El Yes [0 No Channel 1 El El 0

Archive Media:

Probe 3 Channel 2 0

0 ID Channel 3 El 0

0 0

External Hard Drive ET Probe I Channel 1-2 []

El 0

ET Probe 2 Channel 3-4 Q E

El CD-ROM N/A N/A El 0

0 DVD-ROM Analyst / SNT Level / Date:

Jesse R. Delgado III / 14 Nov. 2012 ISWT FORM No. UT 50 (Rev. U11)

ID-2 (48-99 Partial) SG A Safe-End to Inlet Nozzle (Away Towards) my

¶ i

n

[....-

mmr

["

eN.M OvflY P"n LayoUt Proc~m "flgto Wlr&W VieW Wip a ex 5 C TE Cu J ~ &

U......tr 00 54qi" 0

C1 f U WL-M 1!ii ltogmtMAScmM6 0C 10 tL O

Lpww IMuwdDa eaesa. lop 7QS iwss

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification: RC-34-MRCL-AI-05 Pro/Rev/Chg/ICN:

ISwT-PDI-AUT] 1/2/0/1 Examination No.:

ID-3 Project No.:

12-0301 Weld

Description:

SE-to-AS/GInNoz(0-125°)

Device Configuration:

136-00045 Mod.Conf.:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) I SNT Level:

Jeremy Howe / II 14 Nov. 2012 Start End Start End 1045 1137 94.4 94.4 Data Acquisitionl Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SG-NExT Lower Limit 71.56 71.56 Lower Limit 0.00 0.00 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24 76.24 Upr Limit 33.63 33.63 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed:

1.5 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A

_Elevation/Nozzle C/I N/A Master Acquisition File:

DM_PipeIDO0_CW_180_CCWSkew.acq Calibration Records: Examination Notes:

Probe Channel/Angle(s)

Skew Scan Offset Step Offset

_Pipe Diameter = 30.83' Probe 1 1-(60-88-L) 0o

+ 27.57(in)

- 2.21(in) 110001 Circumference 96.86" Probe 2 2-(60-88-L) 1800

+ 37.01(in)

- 2.21(in) 110001 Examination Remarks:

N/A N/A N/A N/A N/A N/A ET Probe 1 1-2

+22.50

+ 5.35(in)

+ 0.00(n)

ET3-PTB-02 ET Probe 2 3-4

-22.5"

- 5.35(in)

+ 0.00(in)

Data Analysis_

Increment & Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s)

Increment Position Scan Position Yes No N/A

Attachment:

Start Stop Start Stop Channel 1 El 01 1

1 -95 71.56 76.24 0.00 33.63 Probe I Channel 2

[a Q

E!

El Yes [0 No Channel 3 E0 El Further Evaluation Channel 1 El 0

E l Required:

Probe 2 Channel 2 0

0 El Channel3 0

El 0

0l Yes Q No Channel 1 0l El 0

Archive Media:

Probe 3 Channel2 0l 0

2 Channel 3

]

0 0D

[0 External Hard Drive ET Probe I Channel 1-2 []

0l 0D JET Probe 2 Channel 3-4 Q 0

0D El CD-ROM I

N/A N/A El El 0

DVD-ROM Analyst /SN'T Level IDate:

Jesse R. Delgado / I / 14 Nov. 2012 isw FORM No. UT 0 (nom. t/11)

ID-3 SIG A Safe-End to Inlet Nozzle (Cw CCw)

ft Omelasy Pan Lyums ftcn*

Tool Wb~ft ftw ft (C-T

) LNtoU 1ia to Lin AlcafPO T

2~h C2AtJ~ogto Ln:ASmanPO

$wpm (B) tLO fta:Ch1A taLD§ e:ASMaPO Ch4

~

L O2 Ao toLin ASwcon0su 1-1_"I r

-T C

?

o M5 2

2.1 71

-I r

13 m L)-t0 w"64I 21 smF

-04 inbaift SN -40 ii

IH I 111 SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification:

RC-34-MRCL-AL-05 Pro/Rev/CbhIICN:

ISWT-AET3/20/0 Examination No.:

ID-3 iProject No.:

12-0301 lWeld

Description:

I]SE-to-A SIG In Noz (0*-125*)

Devce Confllsuration:

1364)0045 Mod.Conf.:

138-00032 Scan Path Drawing:

134-00079 Exam Date I

Examination Time Surface Temperature OF Data Acquisition Operator (3) 1 SNT Level:

William Angell I H 14-Nov-12 Start End Start End 1045 1137 94 94 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller SO-NExT Lower Limit 71.56 71.56 Lower Limit 0.00 0.00 Beom Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24 76.24 Upper Limit 33.63 33.63 ET Probe Size:

.24 (in)

Incremnt:

Y Axial Drive Increment Interval 0.05 Resolution 0.20 Scanning Speed 1.5 inches per mewd Mode.

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

95 Scan Mutio.

Bi-directional Radiusin 1538" Weld CIL 72.262" Corection N/A Elevation/Nozzle C/L N/A Module Parameters:

Calibration Records:

Examination Notes:

Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter-30.83" Probe 1 On 1-2

+422.5"

+5.35 (in)

-2.21 (in.)

ET-03-PTB-002 Circumference - 96.86" Probe 2 On 3-4

- 22.5"

-5.35 (in)

-2.21 (in.)

ET-03-PTB-002 Examination Remarks: Saved data as (ETID.3)

Data Analysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks ScanNo.(s)

Increment Position Scan Position Yes No N/A Attachment EXAMINATION C SCAN FOR ALL 4 CHANNELS Start Stop Start Stop Channell 0

ED 0

(Z[Yes E[No 1-95 71.56 76.24 0.00 33.63 ProeIChannel2 0

9]

0 Further Evaluation Requhre Probe2 Channel 3 0

[]

0[

Channel4 0

9 1]

[

es

[ao 3 Channel 5 0

0 2

Archive Media:

-Channel 6 0

0 2

9 ExternalHard Drive Probe 4 Channel 7 0

0 9]7 03 CD-ROM Probe4 ChannelS

]

[3

[A DVD-ROM I

Analyst / SNT Level / Date:

Reviewed By/Analyst / SNT Level SiS q

r. 1 WilliamAngel/l H

David R. Kleinjan/I H wr room N". irr tm 7u2

Project No. 12-0301 Inbufmt S/N 879328 EXAMINATION ET-ID-3 STATION 2 Date: 14 NOV 2012 CALIBRATiON SHEET: ET-03-PTB-00 MuffiView6,0R8 Idiskj Ph b ftw P" swo

,9 AW Su*sdd 3 MS-500 ET Omob I Dawn AM I htuIA b"

.~wimuI6WmI Du*W WtMLMTADE

Om RFTME

DmWTW1

ETID-

ETID-.4

ETVJ-ghbhi2

- EI-X 22.47 In. A 34.

Naud?1 start 1ýJ'

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification: RC-34-MRCL-AI-05 Pro/Rev/Chg/ICN:

ISwT-PDI-AUTI

/I E

i oNi Examination No.:

IDS4 Project No.:

12-0301 Weld

Description:

SE-to-AS/GInNoz(120`-245*)

DeviceConfiguration:

136-00045 Mod.Cont:

139-O032 Scan Path Drawing: 134-M079 Exam Date Examination Time Surface Temperature *F Data Acquisition Operator (s) / SNT Level:

Jeremy Howe I I 14 Nov. 2012 Start End Start End 1151 1232 94.4 94.4 Data Acquisitioni Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SG-NExT Lower Limit 71.56 71.56 Lower Limit 32.29 32.29 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24 76.24 Upper Limit 65.92 65.92 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed:

1.5 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A

_Elevation/Nozzle C/A N/A Master Acquisition File:

DMPipeID O CW 180_CCWSkew.acq Calibration Records: Examination Notes:

Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe 1 1-(60-88-L) 0°

+ 27.57(in)

- 2.21(in) 110001 Circumference 96.86" Probe 2 2-(60-88-L) 1800

+ 37.01(in)

- 2.21(in) 110001 Examination Remarks:

N/A N/A N/A N/A N/A N/A ET Probe 1 1-2

+22.50

+ 5.35()in ET Probe 2 3-4

-22.5-

- 5.35())

ET)3-PTB-02

~

~ ~ ~

Dt P Analysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s)

Increment Position Scan Position Yes No N/A Attachment Start Stop Start Stop Channel 1

[

[]

El_

1-95 71.56 76.24 32.29 65.92 Probe 1 Channel 2 Dl 0

El F-Yes 0 No Channel 3 0l 0

El Further Evaluation Channel 1 El 01 E

Required:

Probe 2 Channel 2 0

[a E

Channel 3

[1 El 0

E Yes [] No Channel 1 0l El 0

Archive Media:

Probe 3 Channel 2

[]

El 2

Channel 3 El El 0D 0 External Hard Drive ETrProbel Channell-2 El El 0

E"Probe2 Channel 3-4 El El 0

El CD-ROM N/A N/A El El 0

DVD-ROM Analyst / SNT Level I Date:

Jesse I. Delgado HI11

/ 14 Nov. 2012 ISWT FORM N.. UT 50 (Ref. 1111)

ID-4 SG A Safe-End to Inlet Nozzle (Cw CCw)

P& "

O PW*s PU~t Laots moam Toots WMidw fvie e

~'~IOIEI 9

GamWO.AM MdmiabW F2iU 74.3in soaF

IHI

[Ml SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORD Site/Plant :

Point Beach Unit 2 Weld Identification:

RC-34-MRCL-AL-05 Pro/Rev/Chg(ICN:

ISWT-AET3/2/0/0 I xmination No.:

ED4 Project No.:

12-0301 jWeld

Description:

ISE-to-A S/0 In Noz (120*-245*)

Devi"e Confiturationn 136-00045 Mod.Conf.:

138-00032 Scan Path Drawing:

134-00079 Exam Date I

Examination Time Surface Temperature OF Data Acquisition Operator (a) / SNT Level:

William Angell I/

14-Nov-12 Start End Start End 1

1151 1232 94 94 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller SG-NExT Lower Limit 71.56 71.56 Lower Limit 32.29 32.29 Beam Direction Cw/C*

Scan-X Rotator Drive Upper Limit 76.24 76.24 Upper Limit 65.92 65.92 JET Probe Size:

24 (in)

Increment Y Axial Drive inemet interval 0.05 Resolution 0.20 Scanning Speed 1.5 hicnes par secmd Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion; Bi-directional Radius In.

15.38" Weld C/L 72.262" Crrection" N/A

_levation/Noz.Je C/L N/A Module Parameters:

Calibration Records:

Examination Notes:

Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter = 30.83" Probe I On 1-2

+ 22.50

+5.35 (in)

-2.21 (in.)

ET-03-PTB-002 Circumference = 96.86" Probe 2 On 3-4

- 22.5*

-5.35 (in)

-2.21 (in.)

ET-03-PTB-002 Examination Remarks: Saved dath as (ETID)4)

Data Analysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s)

Increment Position Scan Position Yes No N/A Attachment EXCAMINATION C SCAN FOR ALL 4 CHANNELS start stop Start stop Probe 1 Channel 1

[]

[0 Byes ENo Interface of Stainless Steel Clad to Inconel 52 & 152 at 1-95 71.56 76.24 32.29 65.92 Channel 2 0l 0]

0 Further Evaluation Required 69.80" and Inconoe52 & 152 to Safe End located at 72.60" Probe2 Channel 3 D

ED 0

Channel 4 0

[0 0

[Yes

[o Probe_3 Channel 5 0

0 Q

ArchiveMedia:

-Channel 6 0 [

0 E External HardDrive Probe4 Channel 7 0

0 a

0 CD-ROM E

Channel 8 0

p 0

DVD-ROM B

Analyst / SNT Level I Date:

Reviewed By/Analyst / SNT A.

/Sinatmý.

Willam Angelli I

/,H David I. Klelnian / 11 MWT FORI ft. gr 14M

-I1

-/ 1

Project No. 12-0301 hntumet SIN 879328 EXAMINATION ET-ID-4 STATION 2 Dat: 14 NOV 2012 CALJBRATION SHEET: ET-O3-PTB.002 MultiView 6.0118 IdiskI Ph Yinw P"s Ub CdM Layi*

%NWd 11*

MIS.

W 4!'

4.m3 u

MS-5800 ET~Mw~j Eand.

Ahm

~I MdgA we m mia ai m mi DowWh~Aitu I

~TD&ýT 2 j

0-WL*MD.

0m*WtgU1

DNPTWUZ

DRUU1l

0..Tin2

EM.)

ETVD4

' TI~p.,51 7

7a X S4-inASS9061n.'

r71.'

E13-4 V

-m ikmd M.* ý140 "1--

start

IHI IHI SOUTHWEST TECHNOLOGIES Soute T.

AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification: RC-34-MRCL-AI-05 Pro/Rev/ChgIICN:

ISwT-PDI-AUT1 1/2/0/1 Examination No.:

I)4RR Prolect No.:

12-0301 1Weld

Description:

SE-to-A SAOIn Noz(120"-2450!

Device Configuration:

136-00045 Mod.Conf.:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level Jeremy Howe I 11 14 Nov. 2012 Start End Start End 1151 1232 94.4 94.4 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SG-NExT Lower Limit 71.56 71.56 Lower Limit 32.29 48.00 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24 76.24 Upper Limit 65.92 66.00 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed:

1.5 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A Elevation/Nozzle C/I N/A Master Acquisition File:

DM_PipelDO0 CW 180_CCWSkew.acq Calibration Records: Examination Notes:

Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter f 30.83" Probe 1 1-(60-88-L) 00

+ 27.57(in)

- 2.21(in) 110001 Circumference = 96.86" Probe 2 2-(60-88-L) 1800

+ 37.01(in)

- 2.21(in) 110001 Examination Remarks:

N/A N/A N/A N/A N/A N/A ET Probe 1 1-2

+22.5o

+ 5.35(i)

+ 0.00(m)

ET Probe 2 3-4

-22.50

- 5.35(i)

ET03-PTB-02

~~~Data Anal~ysis

~_

Increment & Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s)

Increment Position Scan Position Yes No N/A

Attachment:

Start Stop Start Stop Channel !

I]

E 1-95 71.56 76.24 48.00 66.00 Probe I Channel 2 0

0 E

E3 Yes E0 No Channel 3

[]

0 ED Further Evaluation Channel I C3 El E3 Required:

Probe 2 Channel 2 0

F]

Channel 3 EQ 0

El EYes 2 No Channel 1 El 0]

Archive Media:

Probe 3 Channel 2 0l 01 2

Channel 3 El El 01 E

External Hard Drive ET Probe I Channel 1-2 El El 01

_ET Probe 2 Channel 3-4 El El

0)

D CD-ROM I

N/A N/A El El 0

DVD-ROM Analyst/ SNT Level/ Date:

Jesse R. Deigado / rol/14 Nov. 201*

WSWT FORM No. UTSO (Rev. VI1)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant :

Point Beach Unit 2 Weld Identification: RC-34-MRCL-AI-05 Pro/Rev/Chg/ICN:

ISwT-PDI-AUTI 1/2/0/1 Examination No.:

ID-5 Project No.: 12-0301 Weld

Description:

SE-to-AS/GlnNoz(24o0-365s)

Device Confizuration:

136-00045 Mod.Conf:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level:

Jeremy Howe 11 14 Nov. 2012 Start End Start End JermyHoe ll 4 ov 212 1240 1321 j

94.4 94.4 Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SG-NExT Lower Limit 70.75 70.75 Lower Limit 64.57 64.57 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24 76.24 Upper Limit 98.20 98.20 Probe Type:

PA22-001 Increment Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed:

1.5 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

111 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A Elevation/Nozzle C/I N/A Master Acquisition File:

DM_Pipe_ID OLCW 180_CCW_Skew.acq Calibration Records-Examination Notes:

Probe Channel /Angle(s)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe 1 1-(60-88-L) 00

+ 27.57(in)

- 2.21(in) 110001 Circumference 96.86" Probe 2 2-(60-88-L) 1800

+ 37.01(in)

- 2.21(in) 110001 Examination Remarks:

N/A N/A N/A N/A N/A N/A ET Probe 1 1-2

+22.50

+ 5.35(in)

[T ET Probe 2 3-4

-22.5*

- 5.35(n))

ET3-PTB-02 Increment & Scan Positions Actual Recordable Indications Analyst Remarks Increment Position Scan Position Yes No N/A

Attachment:

Scan No(s)

Start Stop Start stop Channel 1 El 2

El 1-111 70.75 76.24 64.57 98.20 Probe 1 Channel2 El 01 El E Yes El No Channel 3

[]

01 E

Further Evaluation Channel I El 0

Required:

Probe 2 Channel 2 El

[]

E

-Channel 3

0 El 0

0 Yes [2 No Channel 1 0l El

[

Archive Media:

Probe 3 Channel 2 Q

[]

Channel 3 El El 10 0

External Hard Drive I ET Probe I Channel 1-2 El 01 01 JET Probe 2 Channel 3-4 Cl El 3

El CD-ROM I

N/A N/A E

El 0

DVD-ROM Analyst / SNT Level / Date:

Jesse R. Delgado /

I / 14 Nov. 2012 ISWT FORM No. U y0 (1RW. 1.11)

ID-5 SG A Safe-End to Inlet Nozzle (Cw CCw) eFk O~Wiy hm~ Lamot, ftmoa To*s ftidow *w c5'ax

ZETEC S

Omud fLagisw~h:O2d J

Laj IP G&WA~m 20 u

I abd6u~lj F2_"

s Imol il

IHI Mf SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification:

RC-34-MRCL-AL-05 Pro/Rev/Chg/ICN:

ISWT-AET3n2/0/0 Eaination No.:

ID-S Project No.:

12-0301 Weld

Description:

ISE-to-A S/G In Noz (240-365)

Device Configuration:

136-00045 Mod.Conf:

138-00032 Scan Path Drawing:

134-00079 Exam Date I

Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level:

W'illiam Augell / II 14-Nov-12 Start End Start End 1240 1321 94 94 Data Acquisition Scan Coutroller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller SQ-NEXT Lower Limit 70.75 70.75 Lower Limit 64.57 64.57 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24 76.24 Upper Limit 98.20 98.20 ET Probe Siz:

.24 (in)

Increment Y Axial Drive Increment Interval 0.05 Resolution 0.20 Scanning Speed 1.5 finch pe scomd Mode.

Automatic Scan Conversion Units Inches Conversion Units Inche Number of Scans:

111 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/IL 72.26 Correction:

N/A Elevation/Nozzle C/L N/A Module Parameters:

Calibration Records:

Examination Notes:

Status Channel(s)

Skew Scan Offset Step Offset Pipe diametr= 30.83" Probe I On 1-2

+ 22.5?

+5.35 (in)

-2.21 (in.)

ET-03-PTB-002 Circumference = 96.86" Probe 2 On 3-4

- 22.50

-5.35 (in) 21 (in.)

ET-03-PT3B-002 Examination Remarks: Saved data as (ETID 5)

Data Analysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks increment Position Scan Position Yes No N/A Attachment EXAMINATION C SCAN FOR ALL 4 CHANNELS Sca No.(s)

Start S

Start Stop Probe 1 Channel 1 0'

0 eyes

[No 1-111 70.75 76.24 64.57 982.0 Channel 2 0

El 0

Further Evaluation Required Probe2 Channel3 0

El 0

Channel 4 0

12 0l

{N'es Ego Channel 5 0

0 01 Archivc Media Channel 8 0

0 10 12 External Hard Drive Probe 4 Channel 7 0

0" El 0 CD-ROM Channel 8 AEn Ql DVD-ROM ytI SNT Level/Date:

Reviewed By/Analyst /IS Level /S*gauq LWn OlM ft. wr le 7/

Project No. 12-0301 n

-tument SIN 879328 EXAMINATION ET4D-5 Det: 14 NOV 2012 STATION 2 CAUBRA"ON SHEET: ET-03.PTB-002

--X, MulfiView6,ORH Idiskj Mb *sm No&

Mo %WM Lqmt

- M Ina

.+u 4!'

11.1 rn 2 EW Mv5ono 0 cmm* I EMMO m MIn f DI1 kbb ew WWI6a mmI so* 1 W4 M~i CWTUVKW

Dmb

Dm. AFT SM "DmRFTM2

ETID.,5 L dml

- I - -

CM& I M..,

X88.92in.A,3438in.

-T711 S. U ~I.UU ID Il. a 0.II In.

Cmlt XL it142 HAM~

i~

1

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant :

Point Beach Unit 2 IWeld Identification: RC-34-MRCL-AI-05 Pro/Rev/Chb/ICN:

ISwT-PDI-AUT1 1/2/0/1 Examination No.:

ID-5RR Project No.:

12-0301 1Weld

Description:

SE-to-A S/GIn Noz (240'-365*)

Device Configuration:

136-00045 Mod.Conf:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level:

Jeremy Howe /

14 Nov. 2012 Start End Start End 1

1240 1321 94.4 94.4 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limit 70.75 70.75 Lower Limit 64.57 64.00 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24 76.24 Upper Limit 98.20 81.00 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed:

1.5 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

111 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A

_Elevation/Nozzle C/I N/A Master Acquisition File:

DM_PipeIDO0CW_180_CCW_Skew.acq Calibration Records: Examination Notes:

Probe Channel /Angle(s)

Skew Scan Offset Step Offset Pipe Diameter 30.83" Probe I 1-(60-88°L) 00

+ 27.57(in)

- 2.2 1(in) 110001 Circumference = 96.86" Probe 2 2-(60-88-L) 1800

+ 37.01(in)

- 2.21(in) 110001 Examination Remarks:

N/A N/A N/A N/A N/A N/A ET Probe 1 1-2

+22.50

+ 5.35(in)

+ 0.00(in)

ET03-PTB-02 ET Probe 2 3-4

-22.50

- 5.35(in)

~Data Analysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s)

Increment Position Scan Position Yes No N/A

Attachment:

Start Stop Start Stop Channel 1 0

El

[

1-III 70.75 76.24 64.00 81.00 Probe 1 Channel 2 C-0 El El Yes 0 No Channel 3 El 0

El Further Evaluation Channel 1

[1 0

El Required:

Probe 2 Channel 2 0l 2

El Channel 3 0l 0D E]

E Yes 21 No Channel 1

[E

[]

[2 Archive Media:

Probe 3 Charnel 2 C1 0

[]

Channel 3 El 0l 0

[0 External Hard Drive ET Probe 1 Channel 1-2 El 11

_D

_ET Probe2 Channel 3-4 El El 01 E

CD-ROM I

N/A N/A

[]

El 0

DVD-ROM Analyst / SNT Level / Date:

Jesse R. Delgado M / 14 Nov. 2012 ISWT FORM N& VTr SO (Rev. V1)1)

IH I IHI Southwest Technologies Examination Summary Record Point Beech Nudes Plant Unrt 2 e

Udw, Enww ioutIM U 3 She*et N. 00200 m

b:Sterm Generaor Lin S Sab End to Ir SO tn Nox d1el on: RC-344MCL-81-05 Method hoExaminaton het No*.

No.

NRI OReherk UT-

2M UTorQe I 11" t1U ii-12 UT ZW&

AWY Exam

.AUT tWwTAPIAtUl2/1 UvPrme2 (eo4e 110004 11-12 X

UT WD & AWY Exam AUT ISwT-IMITIr/ ir UT Prbe I (Po-w) 110003 13-15 X

UT CW & CCW Exam AUT ISWT-rPD.AJTI1Ir/2 UT Probe 2 0e"w 110003 13-15 X

.IUT CW& CCW Exm AEETE SwT LPrrbe 1 ETOSPT04 13-16 X

Eddy Curet Exam AET ISwT DIAET32R0/0 ET Prno. 2 EY0S.PTDO1 13-15 X

Eddy Currnt Exnm Examninmton Summay:

This weld was examined torn the inside surface using SG-NExT. T4. & MS5800 examnation equipment.

The examinatio overape was 100%.

Prepwar Or. Steven ReVAewed lly ISO &"

Sigatre:w &

7f Dafte:,t r

A 4

Dafte:

lJ

'VWE zwI!1 0

)\\4 9 t/

I I

IHI DII SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification: RC-34-MRCL-BI-05 Pro/Rev/Ch/ICN:

ISwT-PDI-AUTI i/2/0/1 Examination No.:

ID-II Project No.:

12-0301 Weld

Description:

SE-to-B S/G In Noz (0°-185°)

Device Configuration:

136-00045 Mod.Conf.:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level:

Bryan Wright /

18 Nov. 2012lStart I

End Start End Bryn r~htil 8 ov 212 1750 1820 94 94 Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller SG-NExT Lower Limit 70.75 70.75 Lower Limit 0.00 0.00 Beam Direction:

Twd/Awy Scan:

X Rotator Drive Upper Limit 80.35 80.35 Up Limit 49.77 49.77 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed:

2.0 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

65 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A

_Elevation/Nozzle C/I N/A Master Acquisition File:

DM_PipeID 90 AWY_270_TWDSkew.acq Calibration Records: Examination Notes:

Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe I 1-(60-88-L) 900

+ 69.92(m)

- 1.52(m) 110004 Circumference 96.86" Probe 2 2-(60-880L) 2700

+ 59.22(m)

- 2.90(m) 110004 Examination Remarks:

Probe 3 3-(O0Profilometry) 00

+ 0.00(in)

+ 0.00(in) 110004 N/A N/A N/A N/A N/A N/A Data A nalysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks ScNo.(s)

Increment Position Scan Position Yes No N/A

Attachment:

Start stop Start Stop Channel I El R) 0 1-65 70.75 80.35 0.00 49.77 Probe 1 Channel 2 E]

E0 El M Yes []

No Channel 3 I

E0 El Further Evaluation Channel 1 C3 E0 13 Required:

Probe 2 Channel 2 El 2

El Channel 3 71 F+/-0 El 0 Yes E]

No Channel 1 El El E

Archive Media:

Probe 3 Channel2 0

E R0 Channel 3 Ml El E

[0 External Hard Drive ET Probe I Channel -2

[]

ET Probe 2 Channel 3-4 0

El CD-ROM N/A N/A El El DVD-ROM Analyst / SNT Level / Date:

Richard A. Riddles / II / 18 Nov. 2012 ISWfFORIMNo. UT 3O (MV. U111)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant :

Point Beach Unit 2 Weld Identification: RC-34-MRCL-BI-05 Pro/Rev/ChgIICN:

ISwT-PDI-AUT 11/2/0/1 Examination No.:

ID-12 Project No.:

12-0301 Weld

Description:

sEto-B S/G InNoz iso0-365*)

Device Cont*iguration:

136-00045 Mod.Conf.:

138-00032 IScan Path Drawing: 134-0079 Exam Date Examination That Surface Temp erature OF Data Acquisition Operator (s) / SNT Level:

W g I 11

, o 2012 Start End Start End Bryan Wright Ill L

o18 Nv. 2012 1821 1850 Str 12 18094 94 Data AcqistinI4,r Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SG-NExT Lower Limit 70.75 70.75 Lower Limit 48.43 48.43 Beam Direction:

Twd/Awy Scan:

X Rotator Drive Upper Limit 80.35 80.35 Upper Limit 98.20 98.20 Probe Type:

PA22-001 Increment Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed:

2.0 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

65 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A

_Elevation/Nozzle CA N/A Master Acquisition File:

DM_Pipe ID 90 AWY_270_TWDSkew.acq Calibration Records: Examination Notes:

Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe I 1-(60-88-L) 900

+ 69.92(in)

- 1.52(in) 110004 Circumfence= 96.86" Probe 2 2-(60-88-L) 2700

+ 59.22(in)

- 2.90(in) 110004 Examination Remarks:

Probe 3 3-(0°Profilometry) 00

+ 0.00(in)

+ 0.00(in) 110004 N/A N/A N/A N/A N/A N/A Increment & Scan Positions Actual Recordable Indications Analyst Remarks Increment Position Scan Position Yes No N/A Attachment Scan No(s)

Start Stop Start Stop Channel 1 0

2 El 1-65 70.75 80.35 48.43 98.20 Probe 1 Channel 2 0

01 El C3 Yes E]

No Channel 3 0

0l 0

Further Evaluation Channel I E0 R

Required:

Probe 2 Channel 2 0

E0 Channel 3 C

0 El 3

DYes E0 No Channel I Cl 0]

Archive Media:

Probe 3 Channel 2 D

[]

Channel 3 C

R 0 External Hard Drive JET Probe I Channel 1-2 E

0 0D JET Probe 2 Channel 34 0 0

C D0 CD-ROM I

N/A N/A C

0 DVD-ROM Analyst / SNT Level I Date:

Richard A. Riddles / 1I / 18 Nov. 2012 ISWT FORM N& UTsO (Rev. 1111)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Piant :

Point Beach Unit 2 Weld Identification: RC-34-MRCL-BI-05 Pro/Rev/Chg/ICN:

lSwT-PDI-AUTI 1/20/1 Examination No.:

ID-13 Project No.:

12-0301 Weld Descrip on:

SE-to-B S/G In Noz (0-125*)

Device Configuration: 136-00045 Mod.Conf:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) /.SNT Level:

Bryan Wright D

(c 18 Nov. 2012 Start End Start S

End

,1433 1534 94 l

94 Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positions[ Parameters Controller.

SG-NExT Lower Limit 71.56 71.56 Lower Limit 0.00 0.00 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24 6.4 Upper Limit 33.63 33.63 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed:

1.5 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A Elevation/Nozzle CA N/A Master Acquisition File:

DM_Pipe._ID OOCW180_CCWSkew.acq Calibration Records: Examination Notes:

Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe DiRmoter E

30.83" Probe I 1-(60-88-L) 00

+ 27.57(in)

- 2.21(in) 110003 Circumference = 96.86" Probe 2 2-(60-880L) 1800

+ 37.01(in)

- 2.21(m) 110003 Examination Remarks:

N/A N/A N/A N/A N/A N/A ET Probe 1 1-2

+22.5*

+ 5.35(in)

ET Probe 2 3-4

-22.5°

- 5.35(in)

+ 0.00(I)

ET03-PTB-01 Data Analysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks Increment Position Scan Position Yes No N/A

Attachment:

Scan No.(s)

Start Stop Start Stop Channel I 0

El 0

1-95 71.56 76.24 0.00 33.63 Probe I Channel 2 0l 0

El E Yes E0 No Channel 3 0l 0

El Further Evaluation Channel 1 El 0

El Required:

Probe 2 Channel 2 0

E)

El Channel 3

[

0 2

13 Yes El No Channel I 0l El 2

Archive Media:

Probe 3 Channel 2 0

0 21 Channel 3 C3 03 0] External Hard Drive ET Probe I Channel 1-2 0 El 021 ET Probe 2 Channel 3-4 0 El 0D 0

CD-ROM N/A N/A 0l 0]

DVD-ROM Analyst I SNT Level / Date:

Richard A. Riddles /I1II /18 Nov. 2012 I"WTFORMNe. UT O (Rev. V1ll)

ID-11 SG B Safe-End to Inlet Nozzle (Away Towards)

NI t

0 tf umb fta "

PP 1

m rm 1" MIM131 XIf10lI! AGO.

lPI' ml' ZETEC So j 4i j~qb ~#MO2M rnW

ID-12 SG B Safe-End to Inlet Nozzle (Away Towards)

" Om P WW&

tiO f I L~M'~!

I

ID-13 SG B Safe-End to Inlet Nozzle (Cw CCw) oft mv*

hm U"* 14mm TO* M&P ft xv, gjgg 010101iIJKLIg.]a Lný tL.* paltrivIlTIP0 all M We Lb, ch IffEC F7 Omw bD b

tZD hoc ub

oil, ill:

C441SO Lb AS= PO Upd

_73 in h

I K

Lr I~7

'~ I I

Ii ieli.

it m

im StEmodeti %

ml ~Ja SetEtwodmj

?

ID-14 SG B Safe-End to Inlet Nozzle (Cw CCw)

Ua tm* ýfmg Iatw Ruw

?4 U

X1 stulal AgmJ.!J 1i I IEfl IH 9

ZErEC OmŽ1 I O I

~

In misi~g r~

In L

13k I

lot.,

ig bft I ik SeI.Ervo,

ýj m~t a

ID-15 SG B Safe-End to Inlet Nozzle (Cw CCw)

b

9414.

MIARW

. LL.,:*.0-0 19:

rp sk".,

i

W*)~W I A**A A IWW LAMM sIZE

ý2Ov OF"-

sm r---(Li7 im iwa f -om is

I HISOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Ideatifcation:

RC-34-MRCL-BI-05 Pro/Rev/ChWICN:

ISWT-AET3/2/0/0 EaInatlo No.:

ID-13 Project No.:

12-0301 JWeld

Description:

ISE-tD-B S/0 In Noz (0'-125")

Device Configuration:

13640045...EaiainN.

D1 Mod.Conf.:

138-00032 Scan Path Drawing:

134-00079 Exam Date I

Examination Time Surface Temperature OF Data Acquisition Operator (a) / SNT Level:

David R. Kieinjan / 11 17-Nov-12 Start End Start End 1433 1534 94 94 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller SG-NExT LowerLimit 71.56 71.56 Lower Limit 0.00 0.00 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Umit 762.4 76.24 Upper Limit 33.63 33.63 ET Probe Size

.24 (in)

Increment:

Y Axial Drive Increment Interval 0.05 Resolution 0.20 Scanning Speed 1.5 inche per scond Mode:

Automatic Scan Converisi Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L 72.262" Correction:

N/A

_Elevation/Nozzle C/L N/A Module Parameters:

Calibration Records:

Examination Notes:

Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter = 30.83" Probe 1 On 1-2

+ 22.5'

+5.35 (in)

-2.21 (in.)

ET-03-PTB-001 Crcumference = 96.86" Probe 2 On 3-4

-22.5*

-5.35 (in)

-2.21 (in.)

ET-03-PTB-001 ExaminationRemarks_

_______________________________________________________________________________E_____inatioxamiatio mRemrks Data Analysis Increment & Scan Positions Actual Reeordable Indications Analyst Remarks Increment Position Scan Position Yes No N/A Attachment*

EXAMINATION C SCAN FOR ALL 4 CHANNELS Scan No.(s)

Start stop Channel 1

[1 E0 0

2es 2No 1-95 71.56 76.24 0.00 33.63 Channe12 0

1D 0

Further Evaluation Required:

Probe2 Channe2 S 0

0 0

Channel 4 0

0 0

oe's 24o Probe 3 Channel 5 0

0 E0 Archive Media:

-Channel 6 0

0 01 E] ExternalHard Drive Probe4 Channel 7 0

0 10 CD-ROM 1

Channel8 0

0 0

DVD-ROM Analyt / SNT Level / Date:

Reviewed By/Analyst / SNT Level aiiflattur David R. Klelnian /1 EWilliam Angell / U uswr POntMKN.

Ezr li IKJ

Projec No. 12-0301 Irn~umnt SIN 131612 EXAMINATION ET4D-13 STATION I DaW 17 NOV 2012 CAUiBRAMIN SHEET. EI-03-PT3B0O Erha U

1M4

sTaapl TU

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification: RC-34-MRCL-BI-05 Pro/Rev/Chg/ICN:

ISwT-PDI-AUT 11/2/0/1 Examination No.:

ED-14 Project No.:

12-0301 1Weld

Description:

sE-to-Bs/GlnNoz(120*-2450!

Device Configuration:

136-00045 Mod.Conf.:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature *F Data Acquisition Operator (s)

D SNT Level:

Bryan Wr ight 22 D

c Non..

Start End 1trt4 End Bryan Wrighyt/i IBov. 2012z 1610 1654 94 94 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SG-NExT Lower Limit 71.56 71.56 Lower Limit 32.29 32.29 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24 76.24 Upper Limit 65.92 65.92 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed:

1.5 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A Elevation/Nozzle C/I N/A Master Acquisition File:

DMPipeID 0 CW_180_CCWSkew.acq Calibration Records: Examination Notes:

Probe Channel /Angle(s)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe I 1-(60-88-L) 00

+ 27.57(in)

- 2.2 1(in) 110003 Circumference - 96.86" Probe 2 2-(60-88-L) 1800

+ 37.01(in)

- 2.21(in) 110003 Examination Remarks:

N/A N/A N/A N/A N/A N/A ET Probe 1 1-2

+22.5*

+ 5.35(in)

+ 0.m)

ET Probe 2 3-4

-22.5'

- 5.35(in)

ET03-PTB-01 Data Anaysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s)

Increment Position Scan Position Yes No N/A

Attachment:

SaNo()

Start Stop start Stop Channel I El El E

1-95 71.56 76.24 32.29 65.92 Probe I Channel 2 El 0l E

El Yes E0 No Channel3 El E0 E

Further Evaluation Channel 1 0

Rl Required:

Probe 2 Channel 2

[]

El 1

Channel 3 El 0

0l ElYes El No Channel I l

0l F+/-

Archive Media:

Probe 3 Channel 2 E) 0

_1 Channel 3 0l El M

0 Extemal Hard Drive ET Probe I Channel 1-2 El El

[]

ET Probe 2 Channel 3-4 El 0

0 El CD-ROM N/A N/A El El 0

DVD-ROM Analyst / SNT Level / Date:

Richard A. Riddles /

1 / 18 Nov. 2012 ISWT FORM No. UT 5O (Rev. 1i11)

IH I 1111 SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORD Ite/Plant Point Beach Unit 2 Weld Identification:

RC-34-MRCL-BI-05 Pro/Rev/Chg/ICN:

ISWT-AET3/2/0/0 Examination No.:

ID-14 ProjecetNo.:

12-0301 Weld

Description:

SE-to-B s/G inNoz(120--24.n Device Configuration:

136-00045 Mod.Conf.:

138-00032 Scan Path Drawing:

134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level:

David R. Kleinjan / U1 17-Nov-12 Start End Start End S1610 1654 94 94 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controllec.

SG-NExT Lower Limit 71.56 71.56 Lower Limit 32.29 32.26 Beam Direction:

Cw/Cew Scan X Rotator Drive UpperLimit 76.24 76.29 Upper Limit 65.92 65.92 ET Probe Size:

.24 (in) incrent Y Axial Drive Increment Interval 0.05 Resolution 020 Scunni* Speed 1.5 iwhe per 3ecd Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion:

Bi-directional Radius In.

15.38" WeldC/L 72.262" Correction N/A Elevation/Nozzle C/L N/A Module Parameters:

Calibration Records:

Examination Notes:

Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter = 30.83" Probe 1 On 1-2

+ 22.5"

+5.35 (in)

-2.21 (in.)

ET-03-PTh-001 Circumference = 96.86" Probe 2 On 3-4

- 22.5"

-5.35 (in)

-2.21 (in.)

ET-03-PTB-001 Examination Remarks:

Data Analysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks Increment Position Scan Position Yes No NIA Attachnent EXAMINATION C SCAN FOR ALL 4 CHANNELS ScanNo.(s)

Start Stop Start stop Probe I Channel 1 2]

0 0

0 es Eyo 1-95 71.56 76.24 32.29 65.92 Channel 2

[1

[] 0 Further Evaluation Requird Probe2 Channel3 0

[a 0 -

Channel4 0

2]

e "0

Ees 240o Prbe 3 Channel 5 0

0 0l Archive Media:

robe Channel 6 1

0 0I E[ External Hard Drive Probe4 Channel 7 0

E0 0 CD-ROM Channel 8 0

1 DVD-ROM Analyst/ SNT Level / Date:/

Reviewed By/Analyst / SNT I.vd-t u:

David R. Keiensan /I H 1ZL {

.4 William Ajigell / U ISwr FORM ft Er 1s=

/L

Project No. 12-0301 EXAMINATION ET4D-14 Date: 17 NOV 2012 husbmef SMN 131612 STATION I CAUBATION SHEET' ET-03-PTB.001 m~a few3 P*N -

nstmum

srioznu LXL4M52k7.

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification: RC-34-MRCL-Bl-05 Pro/Rev/Ch&/ICN:

ISwT-PDI-AUTI 1/2/0/1 Examination No.:

ID-15 Project No.:

12-0301 Weld

Description:

SE-to-B S/GInNoz(240*-365*"

Device Configuration:

136-00045 Mod.Conf:

138-00032 Scan Path Drawing: 134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level:

(Resolutio)

.0 D1 (a Rov..

Start End Start inEnd B*a r:qn,

,o*v.1*

1700 1745 94 94 Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller SG-NExT Lower Limit 71.56 71.56 Lower Limit 64.57 64.57 Beam Direction:

Cw/Ccw Scan:

X Rotator Drive Upper Limit 76.24

+

76.24 Upper Limit 98.20 98.20 Probe Type:

PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed:

1. 5 inches per second Mode:

Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L:

72.262" Correction:

N/A Elevation/Nozzle C/I N/A Master Acquisition File:

DMPipeID O0CW_180_CCWSkew.acq Calibration Records: Examination Notes:

Probe Channel/Angles)

Skew Scan Offset Step Offset Pipe Diameter = 30.83" Probe I 1-(60-88-L) 00

+ 27.57(in)

- 2.21(in) 110003 Circumference 96.86" Probe 2 2-(60-88-L) 1800

+ 37.01(in)

- 2.21(in) 110003 Examination Remarks:

N/A N/A N/A N/A N/A N/A ET Probe 1 1-2

+22.5-

+ 5.35 in)

ET3-PTB-01 ET Probe 2 3-4

-22.5-

- 5.35(in)

+ 0.00(m)

Increment & Scan Positions Actual Recordable Indications Ana lyst Remarks Scan No.(s)

Increment Position Scan Position yes No N/A Attachment Start Stop start Stop Channel 1I 0

El A

I1-95 71.56 76.24 64.57 98.20 Probe I Channel 2 C1 21 El E] Yes E]

No Channel 3 C1 El 11 Further Evaluation Channel 1

[]

17D lRequired:

Probe 2 Channel 2 0l

[a El Channel 3

[]

ID

[]

[

Yes 0]

No Channel 1

[]

12 Archive Media:

Probe 3 Channel 2 0]

11 12 Channel 3 0]

[]

El 2

External Hard Drive ET Probe I Channel 1-2 0]

El El ET Probe 2 Channel 3-4 Ql 11 0l :

]

CD-ROM N/A N/A El 0]

El DVD-ROM Analyst /SNT Level / Date:

Richard A. Riddles / I / 18 Nov. 2012 ISWFFOIU NO. UTSr (Rev. V11)

MIII SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORD Site/Plant:

Point Beach Unit 2 Weld Identification:

RC-34-MRCL-BI-05 Pro/Rev/Chg/ICN:

ISWT-AET3I2/0/0 I

Project No.:

12-0301 Weld

Description:

SE-to-B S/0 In Noz 40W-365')

Device Configuration:

136-00045 Mod.ConL:

138-00032 Scan Path Drawing:

134-00079 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level:

David IL Kleinian / I 17.Nov-12 Start End Start End 1700 1745 94 94 Data Acquisltion Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller.

SO-NExT Lower Limit 71.56 71.56 Lower Limit 64.57 64.57 Beam Direction:

Cw/CCw Scan:

X Rotator Drive Upper Limit 76.24 76.24 Upper Limit 98.20 98.20 ET Probe Size:

.24 (in)

Incremean Y Axial Drive Incunat Interval 0.05 Resolution 0.20 Scanning Speed 1.5 inches per second Mode:

Automatic Scan Conversimon Units Inches Conversion Units Inches Number of Scans:

95 Scan Motion:

Bi-directional Radius In.

15.38" Weld C/L 72.262" Correction:

N/A Elevation/Nozzle C/L N/A Module Parameters:

Calibration Records:

Examination Notes:

Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter - 30.83" Probe I On 1-2

+ 22.5"

+5.35 (in)

-2.21 (in.)

ET-03-PTB-001 Circumeen* o - 96.86" Probe 2 On 3-4

- 22.5"

-5.35 (in)

-2.21 (in.)

ET-03-PTB-001 Examination Remarks:

Data Analysis Increment & Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s)

Increment Position Scan Position Yes No N/A Attachment EXAMINATION C SCAN FOR ALL 4 CHANNELS Start stop Start Stop Probe Channel1 0

9 F]

[Yes ENo 1-95 71.56 76.24 64.57 98.20 Channel 2

]

9 F]

Further Evaluation Required_

Probe2 Channel3 F]

0]

F]

Channel 4 0]

3 F]

0 yes

[ao Probe 3 Channel5 0]

0]

[

Archive aedied I- _

Channel6 I]

F]

9 9E External Hard Dive 1 Probe 4 Channel7 0

0]

9 0 CD-ROM Channel 8 0

0 0D DVD-ROM Analyst ! SNT Level / Date:lj Reviewed By/Analyst/ SNT Level/Signature:

David I. leinjan /l Wiiam Angell I/ 1 KSWT FORM N. Ir IQ=.1f

Proje No. 12-0301 Itrmt SIN 131612 EXAMATON ET-ID-15 STATKON I Date: 17 NOV 2012 CAUBRATION SHEET: ET-03-PTB-001 we I1313h*

MU"LW EMUg1 Vale.

8 ~m

ML13365A308

Contents

Text

Applicable Code Edition and Addenda

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Description:

Description:

Description:

Attachment:

Description:

Attachment:

Description:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Description:

Attachment:

Description:

Description:

Description:

Navigation menu

ML13365A308

Text

Applicable Code Edition and Addenda

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Description:

Description:

Description:

Attachment:

Description:

Attachment:

Description:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Description:

Attachment:

Description:

Description:

Description:

Navigation menu

Search