ML11104A039

From kanterella
Jump to navigation Jump to search
2010 Fermi Initial Exam Questions and Responses Given During Administration of Written Exam
ML11104A039
Person / Time
Site: Fermi DTE Energy icon.png
Issue date: 09/04/2010
From: David Reeser
Operations Branch III
To:
References
Download: ML11104A039 (2)


Text

NRC RO/SRO Comments Log September 4, 2010 RO# Name Question Answer 6 Breaker protection functions include Yes overcu etc ...

19 Comment: Two right answers, "0", would also Noted indicate a fire.

33 Was "B" RPS MG Set taken out of service lAW Yes the SOP 21 Is additional dynamics required to determine if Information provided in the

@ 6.8 #'s, closing of the Bypass Valves will stem of the question is cause a High Pressure Reactor Scram at this sufficient to answer the power because MSIV's will not close for an question.

additional1S seconds.

33 Was "B" RPS MG Set taken out of service lAW Yes the SOP 35 What range are the IRM's on NOT on range 1, Range 2 or 6 Does transfer control power mean changing Yes source 38 Comment: Must assume the Mode Switch is in Noted RUN 37 The SOP states 2 SRM's removed at a time, do Information provided in the we need to assume SOP used stem of the question is sufficient to answer the uestion.

57 Answer a.{2l, does it mean aerated instead of Correct as written non-aerated 67 What does "important plant action mean" Direct an action from the MCR 18 Comment: Two right answers, "c" is correct Noted due to AND "0" is correct 17 Is this asking ONLY SH 1A What parameter is considered in the mitigation of an ATWS 27 Comment: A ROD BLOCK already exist in the Noted stem of the non IRM B 35 Stated to entire class: NOT on range 1, Range 2 or er.

57 Comment: Answer a.{2l, should say aerated Noted instead of non-aerated SRO# Name Answer Answer 1S.a. ,does possible mean As soon as possible recommended

11

--- Is this all the flow I have as stated in stem of question Assume these are your only injection systems 3 Is the Relay Room accessible after entering Conditions are as stated in appropriate AOP the question 11 Comment: SH 6 reference material is SH 6 was provide NRC incomplete/ some of the appropriate curves proctor did not print