ML091900368
| ML091900368 | |
| Person / Time | |
|---|---|
| Site: | Seabrook  |
| Issue date: | 07/01/2009 |
| From: | Egonis D NextEra Energy Seabrook |
| To: | Rulemaking, Directives, and Editing Branch |
| References | |
| 74FR31993 00001, DG-1222 | |
| Download: ML091900368 (1) | |
Text
NRCREP Resource From:
David Egonis [david.egonis@fpl.com]
Sent:
Wednesday, July 01, 2009 1:51 PM To:
NRCREP Resource
Subject:
Response from "Comment on NRC Documents" Below is the result of your feedback form. It was submitted by David Egonis (david.egonis(cfpl.com) on Wednesday, July 01, 2009 at 13:50:53 0_
///&/07 DocumentTitle: Draft Regulatory Guide DG-1222 Comments: Has there been any industry experience of failed welds that would lend to this decision by the NRC to impose a post pre-heat maintenance for a minimum of four hours. There are components may require a 2000 preheat but do not require PWHT. Does this rule still apply? The term low-alloy can cover a number of materials. Does the NRC have any specific materials of concern?
organization: NextEra Energy Seabrook Station addressl: P.O. Box 300 address2:
city: Seabrook state: NH zip: 03874 7_1 C-country: USA phone: 603-773-7033 SC
-e11 1