W3F1-2008-0074, 180-Day Steam Generator Tube Inspection Report for the 15th Refueling Outage

180-Day Steam Generator Tube Inspection Report for the 15th Refueling Outage

ML083330083
Person / Time
Site:	Waterford
Issue date:	11/25/2008
From:	Murillo R Entergy Nuclear South
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
W3F1-2008-0074
Download: ML083330083 (34)

Text

AM

~Entergy Entergy Nuclear South Entergy Operations, Inc.

17265 River Road Killona, LA 70057-3093 Tel 504-739-6715 Fax 504-739-6698 rmurilesentergy.com Robert J. Murillo Licensing Manager Waterford 3 W3F1-2008-0074 November 25, 2008 U.S. Nuclear Regulatory Commission Attn: Document Control Desk Washington, DC 20555

SUBJECT:

180-Day Steam Generator Tube Inspection Report for the 1 5 TH Refueling Outage Waterford Steam Electric Station, Unit 3 Docket No. 50-382 License No. NPF-38

Dear Sir or Madam:

Attached is the 180-Day RF15 Steam Generator Tube Inspection Report for Entergy Operations, Inc (EOI) Waterford Steam Electric Station Unit 3. This report is being submitted in accordance with Technical Specification 6.9.1.5 and provides the complete results of Refueling Outage 15 Steam Generator Tube Inspection.

If you have any questions or require additional information, please contact Robert Murillo at 504-739-6715.

Very truly yours, RJM/RLW Attachments

1. 180-Day Steam Generator Tube Inspection Report for the 15TH Refueling Outage

2. Tables of Location, Orientation and Measured Sizes of Service Induced Indications

,A-0`47 f-jg*ý

W3F17-2008-0074 Page 2 cc:

Mr. Elmo E. Collins, Jr.

Regional Administrator U. S. Nuclear Regulatory Commission Region IV 612 E. Lamar Blvd., Suite 400 Arlington, TX 76011-4125 NRC Senior Resident Inspector Waterford Steam Electric Station Unit 3 P.O. Box 822 Killona, LA 70066-0751 U. S. Nuclear Regulatory Commission Attn: Mr. N. Kalyanam Mail Stop O-07D1 Washington, DC 20555-0001 Wise, Carter, Child & Caraway ATTN: J. Smith P.O. Box 651 Jackson, MS 39205 Louisiana Department of Environmental Quality Office of Environmental Compliance Surveillance Division P. O. Box 4312 Baton Rouge, LA 70821-4312 American Nuclear Insurers Attn: Library Town Center Suite 300S 2 9 th S. Main Street West Hartford, CT 06107-2445

Attachment I To W3FI-2008-0074 180-Day Steam Generator Tube Inspection Report for the 1 6 TH Refueling Outage

Attachment I to W3F1 -2008-0074 Page 1 of 7 180-Day Steam Generator Tube Inspection Report for the I5 TH Refueling Outage

REFERENCES:

1. Entergy letter dated May 20, 2008, Steam Generator Conditions Observed at Waterford 3 During Refueling Outage 15 (W3F1-2008-0039)

1.0 INTRODUCTION

Waterford 3 Technical Specification (TS) 6.9.1.5 requires Entergy Operations, Inc (Entergy) to submit a report that details the results of the steam generator tube inspection, performed in accordance with TS 6.5.9, Steam Generator (SG) Program, within 180 days after initial entry into HOT SHUTDOWN following completion of the inspection. The report includes:

A. The scope of inspections performed on each SG.

B. Active degradation mechanisms found.

C. Nondestructive examination techniques utilized for each degradation mechanism.

D. Location, orientation (if linear), and measured sizes (if available) of service induced indications.

E. Number of tubes plugged during the inspection outage for each active degradation mechanism.

F. Total number and percentage of tubes plugged to date.

G. The results of condition monitoring, including the results of tube pulls and in-situ testing and assessment of accident-induced leakage from all tubesheet indications.

H. Effective plugging percentage for all plugging in each SG.

The operating period for this report includes two outages, a secondary side inspection during November 2007 and the Refueling Outage (RF) 15 inspection in April 2008. The secondary side inspection results during RF15 have been previously reported to the NRC via Reference 1.

2.0 Steam Generator Design The Waterford 3 Model 70 re-circulating steam generators were designed and fabricated by Nuclear Steam System Supplier Combustion Engineering (CE), Inc. in accordance with ASME Code,Section III NB for Class I vessels. The Waterford 3 steam generators each consist of 9,350 high temperature mill annealed Inconel 600 U-tubes arranged in a one-inch inner diameter triangular pitch pattern representing 103,574 ft2 of heat transfer area. The U-tubes are 3/4" O.D. by 0.048" nominal wall thickness explosively expanded the full depth of the tubesheet (CE's Explansion Process) and welded to the primary cladding. The secondary tube bundle support structure consists of carbon steel eggcrates. The secondary supports are arranged in the following order:

" seven full horizontal eggcrate supports [01H - 07H, 01C - 07C]

six horizontal partial eggcrate supports [08H-10H, 08C - 10C]

" two anti-vibration straps [hot (BW1) and cold (BW9) batwings] and seven vertical straps [ BW2 through BW8; also called Batwings at Waterford 3]

to W3F1-2008-0074 Page 2 of 7 Waterford 3 began RN15 in April 2008 with 8174 tubes in SG #31 and 8184 tubes in SG #32 in service.

3.0 Inspection Content A. The Scope of Inspections Performed on Each SG The RF15.initial inspection plan included:

1. 100% full length 0.600" bobbin examination (Rows 3 and up), 100% 0.600" bobbin examination of hot and cold leg straight sections in Rows 1 and 2.

2. 100% +Pt inspection of all eggcrate distorted signal indication (DSI) signals.

3. 100% +Pt inspection of all >2V dents at eggcrates (based on RF14 bobbin data).

4. 20% +Pt inspection at dented diagonal bar and vertical strap locations >2V.

5. 20% +Pt inspection at freespan dings >5V.

6. 100% hot leg Top of the Tube Sheet (UTS) +Pt inspection in each SG from 3 inches above to 12 inches below TTS.

7. 100% Row 1 and 2 small radius U-bend +Pt inspection in each SG using a mid-range +Pt coil.

8. 100% +Pt inspection of all newly reported indications at diagonal bar and vertical straps (confirmation of mechanism).

9. 100% +Pt inspection of historical % Through-Wall (TW) indications at diagonal bar and vertical straps.

10. 100% +Pt inspection special interest testing including:

a. freespan signals unresolved in history or showing change;

b. any bobbin signal suggestive of tube wear at eggcrate structures;

c. any bobbin signal suggestive of axial degradation within the cold leg tubesheet region;

d. possible loose part (PLP) or loose part indication (LPI) signals reported either by bobbin or rotating pancake (RPC); all surrounding tube locations would also be inspected with RPC;

e. Three tube deep peripheral cold leg top of tubesheet inspection with +Pt coil from 3 inches above to 3 inches below TTS (PLP concern).

11. Plug visual examination.

12. Secondary side Foreign Object Search and Retrieval (FOSAR).

13. Batwing visual inspection.

The inspection plan was developed to specifically address the areas of active degradation as well as areas expected to be affected based on recent industry experience as well as experience from the Spring 2005 Waterford 3 inspection and recent industry inspection results.

to W3FI1-2008-0074 Page 3 of 7 B. Active Degradation Mechanisms Found Axial Outer Diameter Sress Corrosion Cracking (ODSCC) at non-dented eggcrate intersections.

Longitudinal (axial) ODSCC at vertical strap structures.

Axial ODSCC in the hot leg sludge pile freespan region and expansion transition region.

Circumferential ODSCC at the hot leg TTS expansion transition.

Axial Primary Water Stress Corrosion Cracking (PWSCC) at the hot leg expansion transition and expanded tubesheet region.

Circumferential PWSCC at the hot leg TTS expansion transition and expanded tubesheet region.

Wear at eggcrate, diagonal bar, and vertical strap structures.

Tube wear due to foreign objects.

Freespan Axial ODSCC.

C. Nondestructive Examination Technique Sheets (ETSS) Utilized for Each Degradation Mechanism Table C-1 Techniques Mechanism Location Probe Detection ETSS Sizing ETSS 96001.1 96001.1 Thinning / Loose Part Wear Bobbin Rev.1 Rev.1 Rev. 11 Rev. 11 Wear at Tube Support Structures (TSP &

Bobbin 96004.1 96004.1 AVB)

Rev. 11 Rev. 11 Axial ODSCC at Dented Locations <5.0 Bobbin 24013.1 N/A Volts in the Freespan Rev. 2 Axial ODSCC at Non-Dented EC and 96008.1 96008.1 Sludge Pile Rev. 14 Rev. 14 Pitting in the Presence of Copper Bobbin 96005.2 96005.2 Rev. 9 Rev. 9 Axial PWSCC at Dented Support Bobbin 96012.1 N/A Structures <2.0 Volts Rev. 11 Wear at Tube Support Structures (TSP &

+Point 96910.1 96910.1 AVB)

Rev. 10 Rev. 10 21998.1 21998.1 Volumetric at Freespan Regions

+Point Rev. 41Rev.4 Rev. 4 Rev. 4 Axial ODSCC at Support Structures, 21409.1 CEOG-1151 Freespan, Sludge Pile and Tubesheet

+Point Rev. 5 Or Regression Crevice

Attachment I to W3F1 -2008-0074 Page 4 of 7 Table C-1 Techniques (cont)

Mechanism Location Probe Detection ETSS Sizing ETSS 21410.1 EPRI TR-Circ. ODSCC at Expansion Transitions

+Point Rev. 6 107197 Rev. 6 107197 20510.1 20510.1 Circ. PWSCC at Expansion Transition

+Point Rev. 70Rev.7 Rev. 7 Rev. 7 Axial PWSCC at Expansion Transition

+Point 20511.1 20511.1 Rev. 8 Rev. 8 20510.1 20510.1 Circ. PWSCC at Dented Locations

+Point Rev.

20Rev.7 Rev. 7 Rev. 7 96703.1 96703.1 Axial PWSCC at Dented Locations

+Point 22401.1 22401.1 Rev. 17 Rev. 17 AxalOSC a enedSpprtLcaios

+Pit 22401.1 22401.1 Axil DSC t enedSupor Lcaios Ponti:

Rev. 4 Rev. 4 Axial/Circ. PWSCC at Low Row U-Bend i

96511.2 96511.2 Locations

+

Rev. 16 Rev. 16 Axial ODSCC at Low Row U-Bend

+Point 21409.1 CEOG-Il15 Locations Rev. 5 Circ. ODSCC at Low Row U-Bend

+Poit 21410.1 EPRI TR-Locations Rev. 6 107197 CEOG-1 151 - Use of this report for sizing SCC at dented intersections will be conservative as the measured flaw amplitude will include dent influence.

D. Location, Orientation (if linear), and Measured Sizes (if available) of Service Induced Indications See Attachment 2.

Table D-1 "Service Induced Indications SG31 - RF15" Table D-2 "Service Induced Indications SG32 - RF15" Table D-3 "Percent of Wall-Thickness Penetrations for SG31 - RF1 5" Table D-4 "Percent of Wall-Thickness Penetrations for SG32 - RF15" to W3F1-2008-0074 Page 5 of 7 E. Number of Tubes Plugged During the Inspection Outage for Each Active Degradation Mechanism Table E-1 Waterford 3 RFO 15 Repair Summary May 2008 Tutbe Statim G-31 Si;.32 Tubes meie orto RF 0474 31114 Tlxi Number of lubes pgrviously mmowd ftm service 1176

!166 Repair Candidates from RFOI:

lot Leg Top of Tubesheet Axial Indications (Above TTS) 0 a

Hot Leg To o(Tubeshee( Cim. Indications (Above TTS)

S 1

lot Log Tube Sheet Axial Indications (Witrln Tubesheet) 23 3

Hot Lag Tube Sheet Cim. Inkations (Wiihe Tube~heet) 32 a

Tubesheet wih Axial and Cioumerentai Ihditions 2

6 Tubesheet and Support Plate with Axial Inlications I

a Tubed"e irqwersta and Su~oort Plae Axial Ind~cations 0

a E15"-Mr-,,e With Axial Wwatimi_,,s 73 15 twinos With Axial Idican and Stawpot Plate Axial Indicalion I

e BahwNgVs With Volumesic Indication I

Ht Leg Vo__ __e_

I a

Cld Lo Vome ic ations a

a Row I-Row 2 U-4and Idcaton 0

0 Bob": Percents -> 40%

0 2

CuAstome Decision Preventative (Box In) 0 a

CsonrDecision Ptevettatie (Row MIow 2) 5 S

Hot Leg Toala Tubes Deplugged and Repklgged - Post RFO15 0

e Id Leg Total Tubes DOepkgged and Repkxuged

- Post RFO15 3

21 rotl CanrAeTube to be Repaired

uAs,

!172 Hot Leg 54* Stabilizers Installed During RFOtS 11 7

maot Le* 28 Stabilizers Installed Dwfin RFO16" a

4 La l Stabilizers talled During RFO1' e

0 lW Leg W St4 ers Installed During RFOV5 0

a oMd Log 208-Stabilizers Installed Durin RF015 0

5 old L0g 384-Stabilmers Installe Duning RFOIS" 0

12 otal Stabilriers Installed - RFOI1 11 28 rtl Tubes Ptumaed -Post RFO15 1133 1217 Above Tubesheet is all alls -: All' above.

Within Tubesheet is all calls <.'00".

tote:' etes Includes DatOugged tubes_____

to W3F1-2008-0074 Page 6 of 7 F. Total Number and Percentage of Tubes Plugged to Date Table F-1 WF3 Historical Plugging Year Outage EFPY SG31 SG32 Total

% Plug Cumulative Plugs Plugs 1985 Pre-154 169 323 1.7 323 Service 1986 RF01 1.01 0

0 0

1.7 323 1987 RF02 2.08 0

1 1

1.7 324 1989 RF03 3.31 11 8

19 1.8 343 1991 RF04 4.55 161 161 322 3.6 665 1992 RF05 5.83 4

5 9

3.6 674 1994 RF06 7.15 4

2 6

3.6 680 1995 RF07 8.52 15 4

19 3.7 699 1997 RF08 9.90 29 26 55 4.0 754 1999 RF09 11.02 12 10 22 4.2 776 2000 RF10 12.37 28 38 66 4.5 842 2002 RF11 13.70 26 10 36 4.7 878 2003 RF12 15.18 127 50 177 5.6 1055 2005 RF13 16.68 247 223 470 8.2 1525 2006 RF14 18.12 358 460*

818 12.5 2343 2008 RF15 19.41 143 51 194 13.6 2536 Total 1319 1217 2536

• Includes tube plugged on one end to W3F1-2008-0074 Page 7 of 7 G. The Results of Condition Monitoring, Including the Results of Tube Pulls, In-situ Testing, and Assessment of Accident-Induced Leakage from all Tubesheet Indications Waterford 3 did not perform any tube pulls and no in-situ testing was required during RF15.

Based on the Waterford 3 RF15 inspection results, no tubes contained indications which represented a challenge to structural or leakage integrity and all condition monitoring requirements are satisfied. Structural and leakage integrity was established by analysis and through comparison of past in situ testing results as well as by comparison of observed flaw parameters against the leaking testing thresholds established by EPRI TR-1014983 Steam Generator In Situ Pressure Test Guidelines Rev 3.

No primary to secondary leakage is predicted for the eddy current indications observed at RF1 5 in the event of a postulated SLB event. The relative severity levels of the observed degradation was judged consistent with or bounded by the levels associated with the RF14 inspection, and recent inspections of similar CE SGs.

Waterford 3 has a current Plant Specific Leakage limit of 0.375 gallons per minute for an "accident-induced leakage limit" and applies a reduction of 0.1 gallons per minute to this value to provide the basis for the approved tube leakage integrity criteria. The inspection requirements described in TS 6.5.9.c.1 applies an alternate repair criterion which utilized this reduction. The predicted leakage is zero, thus the accident-induced leakage limit is met.

During the Waterford RF1 5 steam generator tube inspection, no indications exceeding the structural integrity limits for either axial or circumferential degradation (i.e., burst integrity > 3 times normal operating primary to secondary pressure differential across SG tubes) were detected. Therefore, no tubes were identified to contain eddy current indications that could potentially challenge the tube integrity recommendations of NEI 97-06 Revision 2, "Steam Generator Program Guidelines".

Similarly, all operational assessment structural and leakage integrity requirements are satisfied at EOC-1 6 for the degradation mechanisms observed at EOC-1 5.

H. Effective Plugging Percentage for all Plugging in Each SG Table H-1 Effective Plugging Percentage Generator

1. Plugged

% Plugmed SG31 1319 14.11%

SG32 1217 13.02%

To W3F17-2008-0074 Tables of Location, Orientation and Measured Sizes of Service'Induced Indications to W3F1-2008-0074 1 of4 Table D-1 Service Induced Indications SG31 - RF15 Count SG ROW COL VOLTS DEG IND LOCN INCHI INCH2 CRLEN CRWID CEG 1

31 1

121 0.28 12 SAI TSH

-10.72

-10.65 0.17 0.37 56 2

31 4

50 0.26 100 SAI 06H 0.81 0.47 0.26 40 3

31 4

146 0.53 10 SAI TSH

-13.41

-13.35 0.13 0.33 50 4

31 4

154 0.31 102 SAI 05C 0.69 0.24 0.4 61 5

31 5

119 0.34 102 SAI 07H

-0.74 0.36 0.35 53 6

31 5

131 0.17 69 SAI 07H 0.71 0.41 0.19 29 7

31 7

137 0.63 111 SAI 07C

-0.5 0.37 0.34 51 8

31 8

54 0.24 112 SAI 06H 0.94 0.45 0.26 40 9

31 8

60 0.22 78 SAI 07H

-0.43 0.18 0.2 31 10 31 8

130 0.26 106 SAI 02H 0.84 0.44 0.32 48 11 31 10 24 0.5 105 SAI 07C 0.7 0.41 0.32 48 12 31 11 127 0.17 97 SAI 05H 0.84 0.34 0.23 35 13 31 11 163 0.21 154 SAI 03H 0.72 0.26 0.4 61 14 31 14 56 0.33 103 SAI 06H

-0.37 0.6 0.24 37 15 31 14 132 0.17 153 SAI 06H 0.74 0.23 0.48 74 16 31 15 29 0.29 109 SAI 07C 0.52 0.33 0.27 42 17 31 15 119 0.26 107 SAI 01H 0.12 0.38 0.43 66 18 31 15 145 0.22 107 SAI1,02H[

0.69 0.15 0.36 55 19 31 16 128 0.76 19 SAII TSH

-14.61

-14.18 0.45 0.33 50 20 31 17 117 0.23 88 SAI 06H 0.82 0.52 0.42 64 21 31 17 125 0.18 119 SAI 05H 0.63 0.36 0.17 26 22 31 21 53 0.13 79 SAI 07H 0.87 1

0.12 0.21 32 23 31 21 61 0.15 101 SAI 02H 0.79 0.14 0.38 58 24 31 21 151 0.08 61 SAI 07H

-0.36 0.14 0.16 24 25 31 23 127 0.55 17 SAI TSH

-9.14

-9.08 0.09 0.38 58 26 31 24 160 0.24 153 SAI 03H 0.73 0.14 0.34 51

^A I

n A I I,

~

A I

%1

% n 45 1

%rrnc OA 27 31 26 5*

U.LI 0.4 SA; u-n

-U.0o U____

I U.

28 31 27 113 0.16

_79 SA 01 H 1-0.05 10.52 0.69 106 29 31 29 147 0.29 73 SAN 07H

-0.59 0.14 0.31 47 30 31 31 137 0.45 16 SAI TSH

-13.44

-13.14 0.3 0.37 56 31 31 32 112 0.42 100 SAI 03H 0.66 0.4 0.35 53 32 31 32 114 0.62 88 SAI 07H

-0.38 2

0.31 47 33 31 32 120 0.21 106 SAI 07H 0.73 1

0.46 0.21 32 34 31 32 132 0.27 99 SAI 07H 1 0.21 1

0.46 0.28 43 to W3F1-2008-0074 Table D-1 Service Induced Indications SG31 - RF15 2 of 4 Count SG 4W COL VOLTS DEG IND LOCN INCHI INCH2 CRLEN CRWID CEG 35 31 33 67 0.59 104 SAI 05H 0.67 0.61 0.29 45 36 31 34 120 0.26 155 SAI 02H 0.3 0.48 0.48 74 37 31 37 39 0.7 11 SAI TSH

-6.53

-6.3 0.22 0.33 50 38 31 37 65 0.45 13 SAI TSH

-3.34

-3.15 0.22 0.45 69 39 31 40 64 0.37 15 SAI TSH

-1.84

-1.78 0.06 0.43 66 40 31 42 112 0.24 112 SAI 02H 0.74 0.3 0.31 47 41 31 43 59 0.09 62 SAI 02H 0.78 0.28 0.36 55 42 31 43 67 0.48 8

SAI TSH

-0.83

-0.69 0.15 0.52 79 43 31 43 111 0.43 15 SAI TSH

-2.74

-2.35 0.43 0.4 61 44 31 44 68 0.49 11 SAI TSH

-1

-0.89 0.12 0.43 66 45 31 44 112 0.27 111 SAI 03H 0.8 0.27 0.29 45 46 31 46 54 0.4 104 SAI 07H

-0.5 0.59 0.33 50 47 31 48 134 0.25 103 SAI 02H 0.89 0.26 0.27 42 48 31 49 103 0.26 14 SAI TSH

-1.44

-1.04 0.4 0.36 55 49 31 51 59 0.15 69 SAI 04H 0.76 0.33 0.43 66 50 31 51 129 0.21 98 SAI 05H 0.91 0.36 0.28 43 51 31 51 133 0.26 101 SAI 07H 0.38 0.77 0.27 42 52 31 51 149 0.59 11 SAI TSH

-9.91

-9.54 0.37 0.34 51 53 31 52 104 0.51 13 SAI TSH

-2.97

-2.77 0.2 0.4 61 54 31 52 108 0.18 117 SAI 03H 0.84 0.36 0.38 58 55 31 53 143 0.27 93 SAI BW6 0.83 0.33 0.24 37 56 31 55 93 0.13 89 SAI 07H 0.94 0.36 0.19 29 57 31 55 113 0.6 15 SAI TSH

-6.33

-5.63 0.7 0.36 55 58 31 55 121 0.15 56 SAI 07H 0.81 0.27 0.22 34 59 31 57 95 0.45 19 SAI TSH

-2.32

-2.09 0.23 0.32 48 60 31 57 103 0.24 88 SAI 08H

-0.25 0.58 0.27 42 61 31 59 67 0.57 116 SAI 05H

-0.1 1

0.27 42 5

8

%, 40

41) nrAI AU -7n n

in AA A 1

A aU9n

. I0 1 AVU'*l~i I

I V...

0 v.-I 63 31 59 95 0.22 17 SAI TSH

-0.87

-0.68 0.2 0.55 84 64 31 59 123 0.16 112 SAI 06H 0.73 0.39 0.33 50 65 31 64 62 0.29 103 SAI 05H 0.64 0.75 0.24 37 66 31 65 73 0.13 99 SAI 05H

-0.59 0.33 0.18 27 67 31 66 78 0.14 88 SAI TSH

-0.16

-0.01 0.16 0.32 48 68 31 66 80 0.65 13 SAI TSH

-1.15

-0.97 0.19 0.33 50 69 31 67 95 0.74 15 SAI TSH

-7.01

-6.44 0.43 0.35 53 to Table D-1 W3F1-2008-0074 Service Induced Indications SG31 - RF15 3 of 4 Count SG ROW COL VOLTS DEG IND LOCN INCH1 INCH2 CRLEN CRWID CEG 70 31 67 129 0.19 111 SAI 07H

-0.35 0.45 0.24 37 71 31 68 156 0.24 104 SAI BW4 0.47 0.98 0.5 0.25 39 72 31 69 87 0.32 121 SAI 06H

-0.09 0.39 0.27 42 73 31 72 78 0.24 16 SAI TSH

-1.35

-1.14 0.21 0.35 53 74 31 73 41 0.32 127 SAI 01H 0.75 0.9 0.15 0.35 53 75 31 74 124 0.32 122 SAI 06H 0.65 0.14 0.23 35 76 31 79 95 0.12 77 SAI 08H

-0.98 0.21 0.19 29 77 31 80 82 0.33 95 SAI 08H 0.79 0.55 0.29 45 78 31 82 102 0.18 112 SAI BW5

-0.78 0.26 0.22 34 79 31 83 49 0.2 130 SAI 01H

-0.78

-0.51 0.36 0.27 42 80 31 84 40 0.37 16 SAI TSH

-6.34

-6.13 0.29 0.48 74 81 31 84 126 0.24 89 SAI 06H 0.89 0.14 0.24 37 82 31 85 127 0.26 129 SAI 02H 0.23 0.14 0.34 51 83 31 86 92 0.31 116 SAI 05H 0.6 0.44 0.22 34 84 31 88 98 0.13 98 SAI 08H 0.95 0.28 0.21 32 85 31 89 131 0.14 97 SAI 07H 0.82 0.2 0.2 31 86 31 93 63 1.36 22 SAI TSH

-13.68

-13.27 0.44 0.31 47 87 31 98 94 0.33 120 SAI 05H

-0.21 0.2 0.28 43 88 31 100 42 0.19 108 SAI 07H 0.71 0.89 0.39 0.2 31 89 31 104 42 0.1 90 SAI 07H 0.88 1

0.12 0.31 47 90 31 104 54 0.18 82 SAI 09H 0.87 0.39 0.22 34 91 31 105 57 0.12 100 SAI 05H 0.78 0.23 0.33 50 92 31 105 109 0.31 114 SAI BW6 0.79 0.55 0.33 50 93 31 106 130 0.36 127 SAI 01H 0.66 0.46 0.35 53 94 31 107 113 0.2 117 SAI 02H 1.01 0.33 0.42 64 95 31 108 54 0.16 88 SAI 09H 0.72 0.26 0.21 32 96 31 108 76 0.08 73 SAI 06H 1.03 0.21 0.16 24 Q-7 1.,

1 0 A

899 n.Q 1* In,)

CAI n1A*u n Ra*

5. R%

9 97 3.1 10 89 02I8L.

1.02 Sl I

0.25 0.42 4

1 98 31 109 99 0.54 123 SAI BWl

-3.5 0.77 4.31 0.42 64 99 31 ill 59 0.21 73 SAI 02H 1

0.24 0.46 71 100 31 115 55 0.89 21 SAI TSH

-12.56

-12.3 0.22 0.36 55 101 31 115 61 0.12 98 SAI 02H 0.89 0.21 0.34 51 102 31 122 92 0.11 45 SAI 08H

-0.97 0.25 0.2 31 103 31 128 126 0.3 37 SAl BW3 W 0.91 0.65 0.52 79 104 31 143 99 0.18 134 SAI 01H 0.8 0.24 0.32 48 to W3F1-2008-0074 Table D-1 Service Induced Indications SG31 - RF15 4 of 4 Count SG ROW COL VOLTS DEG IND LOCN INCH1 INCH2 CRLEN CRWID CEG 105 31 3

135 0.36 17 SCI TSH

-2.79 0.07 0.24 37 106 31 6

44 0.52 14 SCI TSH

-4.18 0.26 0.32 48 107 31 7

31 0.16 14 SCI TSH

-12.86 0.29 0.17 26 108 31 7

51 1.1 8

SCI TSH

-3.05 0.32 0.24 37 109 31 18 40 0.36 20 SCI TSH

-4.3 0.26 0.17 26 110 31 18 42 0.27 12 SCI TSH

-7.13 0.29 0.23 35 111 31 22 124 1.08 19 SCI TSH

-14.31 0.27 0.21 32 112 31 26 62 0.29 21 SCI TSH

-7.46 0.26 0.25 39 113 31 27 45 0.44 11 SCI TSH

-2.82 0.26 0.22 34 114 31 32 52 0.51 18 SCI TSH

-0.05 0.16 0.32 48 115 31 34 34 0.4 17 SCI TSH

-6.69 0.23 0.22 34 116 31 38 42 0.36 14 SCI TSH

-1.84 0.26 0.21 32 117 31 38 148 0.37 28 SCI TSH

-9.42 0.26 0.36 55 118 31 44 48 0.43 12 SCI TSH

-5.74 0.2 0.32 48 119 31 44 54 0.34 15 SCI TSH

-13.19 0.23 0.29 45 120 31 45 43 0.49 17 SCI TSH

-11 0.39 0.21 32 121 31 48 142 1.7 29 SCI TSH

-10.61 0.26 1.23 188 122 31 55 41 0.29 17 SCI TSH

-4.29 0.19 0.19 29 123 31 56 64 0.39 17 SCI TSH

-10.09 0.13 0.17 26 124 31 58 64 0.59 22 SCI TSH

-0.13 0.35 0.29 45 125 31 61 29 1.09 24 SCI TSH

-11.55 0.19 0.19 29 126 31 68 44 0.85 20 SCI TSH

-2.85 0.28 0.22 34 127 31 68 122 0.74 22 SC0 TSH

-5.06

-4.84 0.31 0.19 29 128 31 72 106 0.75 16 SCI TSH

-4.85 0.3 0.17 26 129 31 75 109 0.76 14 SCI TSH

-4.03 0.21 0.19 29 130 31 77 99 0.26 21 SCI TSH

-3.14 0.25 0.21 32 131 31 77 109 0.65 29 SCI TSH

-4.52 0.3 0.2 31 1

4 0

1

^ An 1

14 1

l "rlT u I

44 1

A N

1

" )-

AN I0

01.

to Iy f-O

.1tV f

I

• .1 1

I Q.Pl I

-V.

I I V.%)e, V.r-V

-rV 133 31 80 44 0.58 15 SCI TSH

-5.59 0.23 0.22 34 134 31 80 46 0.46 14 SCI TSH

-6.26 0.31 0.18 27 135 31 105 99 0.41 25 SCI TSH

-16.22 0.34 0.2 31 136 31 124 116 0.22 88 SCI TSH 0

0.15 0.2 31 137 31 7

23 0.16 105 SVI TSH 0.43 0.19 0.37 56 to W3F1-2008-0074 1 of 2 Table D-2 Service Induced Indications SG32 - RF15 Count SG ROW COL VOLTS DEG IN LOCN INCH1 INCH2 CRLEN CRWID CEG 1

32 11 17 0.2 149 SAI 02H 0.8 0.91 0.15 0.33 50 2

32 15 47 0.19 65 SAI 06H 0.75 0.9 0.32 0.19 29 3

32 15 117 0.24 83 SAI 07H 0.72 0.81 0.35 0.23 35 4

32 16 132 0.53 11 SAI TSH

-1.54

-1.4 0.15 0.38 58 5

32 17 15 0.13 123 SAI 07H 0.72 0.83 0.18 0.26 40 6

32 20 164 0.31 129 SAI 03H 0.86 0.15 0.54 82 7

32 21 119 0.96 16 SAI TSH

-10.44

-10.3 0.17 0.32 48 8

32 21 131 0.16 83 SAI 07H

-0.1 0.33 0.23 35 9

32 26 46 0.3 89 SAI 05H 0.92 0.33 0.38 58 10 32 26 170 0.28 9

SAI TSH

-7.35

-7.29 0.13 0.23 35 11 32 29 123 0.89 15 SAI TSH

-5.18

-5.3 0.21 0.38 58 12 32 34 116 0.68 13 SAI TSH

-3.46

-3.26 0.22 0.32 48 13 32 46 130 0.23 114 SAI 03H

-0.7 0.13 0.38 58 14 32 49 59 0.37 115 SAI 04H 14.9 15.49 0.58 0.45 69 15 32 51 131 0.29 73 SAI 01H 1.05 0.38 1.01 154 16 32 57 109 0.09 89 SAI 06H 0.71 0.9 0.4 0.2 31 17 32 58 110 0.6 11 SAI TSH

-3.63

-3.52 0.2 0.48 74 18 32 62 70 0.23 116 SAI 08H

-0.15 0.27 0.27 42 19 32 67 57 0.31 106 SAI 08H 0.87 0.5 0.23 35 20 32 69 95 0.29 121 SAI BW5 0.72 0.4 0.55 84 21 32 73 79 0.46 10 SAI TSH

-7.04

-7.09 0.25 0.42 64 22 32 74 96 0.76 11 SAI TSH

-0.89

-1.38 0.48 0.37 56 23 32 75 29 0.2 48 SAI 06H 0.9 0.27 0.36 55 24 32 75 33 0.11 57 SAI 02H

-0.83 0.36 0.32 48 25 32 76 30 0.14 99 SAI BW4

-0.57 0.18 0.23 35 26 32 85 69 0.51 7

SAI TSH

-3.52

-3.42 0.12 0.28 43 27 32 92 104 0.23 50 SAl 0.75 0.17 0.37 56 28 32 92 106 0.21 57 SAI BW3 0.74 0.24 0.27 42 29 32 9

47 0.22 90 SCI TSH

-10.66 0.42 0.39 59 30 32 15 121 0.36 23 SCI TSH

-2.4 0.27 0.18 27 31 32 30 124 0.39 20 SCI TSH 0.01 0.29 0.22 34 32 32 65 73 0.62 18 SCI TSH

-0.01 0.26 0.21 32 33 32 65 77 0.47 18 SCI TSH

-0.03 0.26 0.19 29 34 32 65 105 0.41 23 SCI TSH

-0.05 0.16 0.24 37 to W3F1-2008-0074 2 of 2 Table D-2 Service Induced Indications SG32 - RF15 Count SG ROW COL VOLTS DEG IND LOCN INCHI INCH2 CRLEN CRWID CEG 35 32 65 107 0.27 21 SCI TSH

-0.09 0.16 0.26 40 36 32 70 78 0.44 32 SCI TSH

-0.04 0.2 0.28 43 37 32 115 75 0.17 94 SCI TSH

-12.9 0.25 0.25 39 to W3F17-2008-0074 I of 7 Table D-3 Percent of Wall-Thickness Penetrations for SG31 - RF1 5 Count SG ROW COL IND PER LOCN INCH1 1

31 1

43 PCT 4

07H 0.77 2

31 1

167 PCT 19 03C 0.87 3

31 1

169 PCT 11 03C0 0.95 4

31 1

169 PCT 18 03C

-0.25 5

31 2

40 PCT 12 04C 0.86 6

31 5

7 PCT 9

07H

-0.46 7

31 5

175 PCT 12 01C

-0.22 8

31 8

6 PCT 9

03H 0.73 9

31 12 160 PCT 8

03H 0.73 10 31 16 172 PCT 9

01 GO

-0.62 11 31 18 164 PCT 8

02H 0.87 12 31 19 15 PCT 8

BW5

-0.81 13 31 19 15 PCT 8

BW5 0.95 14 31 19 27 PCT 9

BW5 1.07 15 31 19 55 PCT 24 BW5 0.97 16 31 19 63 PCT 3

BW5

-0.97 17 31 19 63 PCT 12 BW5 0.97 18 31 19 167 PCT 14 BW5

-0.99 19 31 19 167 PCT 23 BW5 1

20 31 20 4

PCT 7

01 0.

0.2 21 31 21 39 PCT 17 BW5 0.74 22 31 22 46 PCT 7

BW5

-0.83 23 31 22 112 PCT 6

BW5 1.09 24 31 22 120 PCT 3

BW5 0.19 25 31 22 120 PCT 7

BW5

-0.96 26 31 23 57 PCT 8

BW5 0.76 27 31 24 56 PCT 15 BW5

-0.71 28 31 24 60 PCT 19 BW5

-0.79 29 31 30 60 PCT 24 BW5 0.99 30 31 31 115 PCT-.

18 01H 0.82 31 31 32 22 PCT 11 BW5

-1.03 32 31 32 60 PCT 17 BWV5 0.59 33 31 35 63 PCT 4

BW5

-0.66 34 31 35 63 PCT 13 BW5 0.69 35 31 36 16 PCT 10 BW5 0.79 36 31 36 18 PCT 8

BW5 0.73 37 31 36 18 PCT 10 BW5

-1.01 38 31 37 25 PCT 10 BW5 0.22 39 31 37 25 PCT 19 BW5 0.65 40 31 37 25 PCT 20 BW5

-0.71 41 31 37 41 PCT 17 BW5

-0.75 42 31 39 41 PCT 7

BW5 0.68 43 31 39 41 PCT 23 BW5

-1.08 44 31 39 111 PCT 7

BV\\5 0.31 45 31 39 111 PCT 27 BW5 0.87 46 31 40 68 PCT 17 BVW5 0.53 47 31 40 112 PCT 7

BW5 1.08 to W3F1-2008-0074 Table D-3 Percent of Wall-Thickness Penetrations for SG31 - RF15 2 of 7 Count SG ROW COL IND PER LOC-N INCHI 48 31 40 112 PCT 8

BW5

-0.76 49 31 40 126 PCT 11 BW5

-0.8 50 31 41 5

PCT 10 06H

-0.87 51 31 42 6

PCT 20 BWN5

-0.2 52 31 42 20 PCT 21 BWI5

-0.8 53 31 42 40 PCT 19 BW5 1

54 31 42 108 PCT 2

BWI5 0.09 55 31 42 108 PCT 14 BWI5 0.91 56 31 42 108 PCT 23 BWV5

-0.72 57 31 42 170 PCT 22 01 Ca 0.22 58 31 43 53 PCT 23 BW5 0.99 59 31 44 66 PCT 25 BVV5 0.86 60 31 44 156 PCT 6

BVV5 0.15 61 31 44 156 PCT 16 BWI5 0.76 62 31 45 17 PCT 14 BIN5

-0.69 63 31 45 17 PCT 15 BWI5 0.87 64 31 45 49 PCT 3

BN5

-0.1 65 31 45 49 PCT 22 BI5 0.79 66 31 45 115 PCT 5

BWI5 0.06 67 31 45 115 PCT 17 BWI5 0.68 68 31 45 115 PCT 20 BIN5

-0.74 69 31 45 117 PCT 20 BIN5

-0.74 70 31 46 52 PCT 15 BWI5 0.61 71 31 46 66 PCT 21 B"W9 1.9 72 31 46 70 PCT 14 BIN5

-0.09 73 31 46 70 PCT 26 BIN5

-0.74 74 31 46 70 PCT 32 BIN5 0.84 75 31 48 144 PCT 14 BIN5 0.97 76 31 48 144 PCT 27 BIN5

-0.94 77 31 49 115 PCT 16 BIN5 0.77 78 31 49 115 PCT 21 BIN5

-0.77 79 31 50 28 PCT 15 BIN5

-0.94 80 31 50 28 PCT 22 BM5 1.07 81 31 50 40 PCT 20 BWN5

-0.7 82 31 50 56 PCT 19 BIN5

-0.96 83 31 50 56 PCT 23 BINS 1.06 84 31 50 66 PCT 7

BVV5

-0.03 85 31 50 66 PCT 14 BW5 0.83 86 31 50 66 PCT 38 BIN5

-0.81 87 31 51 39 PCT 7

BW6 1.09 88 31 51 57 PCT 7

BVM4 0.9 89 31 51 67 PCT 1

BWV4

-0.64 90 31 51 67 PCT 11 BIN5

-0.73 91 31 51 67 PCT 24 B"14 0.79 92 31 55 35 PCT 11 BVV4 0.62 93 31 55 89 PCT 22 BIl

-1.81 94 31 56 94 PCT 15 BVN9 1.77 95 31 59 37 PCT 14 BWN6

-1.04 to W3MF -2008-0074 Table D-3 Percent of Wall-Thickness Penetrations for SG31 - RF15 3 of 7 Count SG ROW COL IND PER LOCN INCHI 96 31 59 43 PCT 14 BW5 1.04 97 31 59 49 PCT 10 BW5 0.78 98 31 60 164 PCT 19 01C

-1.06 99 31 61 15 PCT 8

BW5 0.23 100 31 61 15 PCT 11 BW5 1.14 101 31 61 15 PCT 11 BW6 0.95 102 31 61 15 PCT 12 BW5

-0.96 103 31 61 15 PCT 23 BW6

-0.95 104 31 61 35 PCT 20 BW5 1.13 105 31 61 35 PCT 21 BW6 1.07 106 31 61 63 PCT 5

BW5

-0.78 107 31 61 63 PCT 12 BW5 1.09 108 31 61 79 PCT 8

BW5 0.86 109 31 62 18 PCT 12 BW4 0.79 110 31 63 63 PCT 6

BW4 0.67 111 31 63 63 PCT 9

BW5 0.81 112 31 63 63 PCT 10 BW4

-0.84 113 31 63 63 PCT 11 BW6 0.69 114 31 63 137 PCT 11 BW4

-0.47 115 31 63 137 PCT 16 BW5

-1.02 116 31 64 16 PCT 8

BW5 0.8 117 31 64 16 PCT 15 BW5

-0.99 118 31 66 28 PCT 18

030C, 0.26 119 31 67 139 PCT 15 08C 0.83 120 31 68 78 PCT 25 BW6 1.19 121 31 69 95 PCT 9

BW9 1.8 122 31 70 24 PCT 12 BW6 0.78 123 31 70 24 PCT 13 BW5

-0.83 124 31 70 88 PCT 10 BW9

-0.67 125 31 71 93 PCT 16 BW9

-1.91 126 31 72 126 PCT 7

021-1

-0.85 127 31 72 126 PCT 13 BW5

-0.99 128 31 72 126 PCT 15 BW4

-0.6 129 31 72 126 PCT 15 BW5 0.12 130 31 72 126 PCT 24 BW4 1.02 131 31 74 14 PCT 7

BW1

-1.95 132 31 74 14 PCT 12 BW4 0.98 133 31 74 132 PCT 2

031-1

-0.28 134 31 74 132 PCT 6

021-1 0.86 135 31 74 134 POT 15 BW6 0.81 136 31 74 144 PCT 12 BW5 0.88 137 31 74 144 PCT 15 BW6 0.85 138 31 76 58 PCT 11 BW6

-0.66 139 31 76 128 PCT 9

BW5

-0.18 140 31 76 128 PCT 11 BW5 1.13 141 31 76 128 PCT 15 BW4 0.85 142 31 76 128 PCT 15 BW5

-0.62 143 31 76 128 PCT 15 BW6

-0.6 to W3F17-2008-0074 4 of 7 Table D-3 Percent of Wall-Thickness Penetrations for SG31 - RF15 Count SG ROW COL IND PER LOCN INCH1 144 31 76 128 PCT 23 BW6 1.1 145 31 76 140 PCT 6

BW6 0.09 146 31 76 140 PCT 8

BW4 0.85 147 31 76 140 PCT 11 BW4

-1.01 148 31 76 140 PCT 11 BW5 0.11 149 31 76 140 PCT 12 BW5 0.79 150 31 76 140 PCT 23 BW6 0.94 151 31 76 148 PCT 8

BW4 0.62 152 31 76 148 PCT 14 BW4

-0.89 153 31 77 27 PCT 18 BW4

-0.75 154 31 77 27 PCT 19 BW5

-0.9 155 31 77 27 PCT 19 BW5 0.81 156 31 77 27 PCT 21 BW6 0.77 157 31 77 27 PCT 25 BW6

-0.9 158 31 77 35 PCT 15 BW5 0.83 159 31 77 35 PCT 16 BW5

-0.85 160 31 78 22 PCT 9

BW6 1.03 161 31 78 22 PCT 10 BW5 0.86 162 31 78 72 PCT 14 08C

-0.91 163 31 78 80 PCT 9

BW6 0.89 164 31 78 80 PCT 14 BW5

-0.72 165 31 78 98 PCT 6

BW4 0.71 166 31 78 98 PCT 14 080(.

0.81 167 31 78 98 PCT 17 BW4

-0.61 168 31 78 98 PCT 21 BW6 0.83 169 31 78 100 PCT 6

BW5 0.06 170 31 78 100 PCT 8

BW6

-0.19 171 31 78 100 PCT 15 BW5

-0.74 172 31 78 100 PCT 15 BW5 0.7 173 31 78 100 PCT 20 BW6 0.82 174 31 78 108 PCT 13 BW6

-0.41 175 31 78 108 PCT 18 BW4

-0.79 176 31 78 108 PCT 19 BVV5

-0.77 177 31 78 138 PCT 6

BW4 0.87 178 31 78 138 PCT 20 BVV4

-0.59 179 31 78 142 PCT 9

BW4 0.77 180 31 78 142 PCT 12 BW6

-0.97 181 31 78 142 PCT 15 BW4

-0.69 182 31 78 142 PCT 18 BW5 0.17 183 31 78 144 PCT 9

BW5 0.73 184 31 78 144 PCT 10 BW4 0.11 185 31 78 144 PCT 11 BW6

-0.78 186 31 78 144 PCT 15 BWV5

-0.68 187 31 78 144 PCT 19 BW5

-0.03 188 31 78 144 PCT 24 BW6 0.9 189 31 78 144 PCT 25 BW4 0.76 190 31 78 144 PCT 30 BW4

-0.76 191 31 79 161 PCT 20 020 0.72 to W3F1-2008-0074 Table D-3 Percent of Wall-Thickness Penetrations for SG31 - RF1 5 5 of 7 Count SG ROW COL IND PER LOCN INCHI 192 31 80 38 PCT 9

BW4 0.06 193 31 80 38 PCT 15 BW5

-0.83 194 31 80 38 PCT 17 BW4 0.89 195 31 80 38 PCT 26 BW6

-0.89 196 31 81 21 PCT 24 08C0 0.67 197 31 81 61 PCT 24 BW4 0.83 198 31 81 129 PCT 10 01H 0.71 199 31 81 131 PCT 5

03H

-0.59 200 31 81 147 PCT 20 BW6 0.72 201 31 81 159 PCT 5

BW9 1.99 202 31 82 32 PCT 14 BW4 0.84 203 31 82 38 PCT 14 BW5

-0.73 204 31 82 38 PCT 28 BW6

-0.74 205 31 82 54 PCT 18 BW6

-0.74 206 31 82 54 PCT 18 BW6 0.92 207 31 82 54 PCT 26 BW5

-0.82 208 31 82 54 PCT 32 BW5 0.92 209 31 82 62 PCT 15 BW4

-0.56 210 31 82 62 PCT 16 BW5 1.17 211 31 82 62 PCT 21 BW6

-0.56 212 31 82 82 PCT 21 BW5 0.92 213 31 82 84 PCT 6

BW'6

-0.82 214 31 82 84 PCT 9

BW6 0.87 215 31 82 96 PCT 19 BVV5

-0.81 216 31 82 126 PCT 11 BW6 1.04 217 31 82 138 PCT 12 BW4

-0.59 218 31 82 138 PCT 12 BW4 0.99 219 31 82 138 PCT 17 BW5 0.66 220 31 82 138 PCT 27 BA6 1.01 221 31 82 140 PCT 12 BW6 0.93 222 31 82 140 PCT 19 BV4 0.76 223 31 82 140 PCT 23 BW6

-0.62 224 31 82 142 PCT 22 BVV6

-0.57 225 31 82 158 PCT 28 01C 0.86 226 31 83 81 PCT 14 BW3 0.9 227 31 83 87 PCT 17 Bw7 1.05 228 31 83 97 PCT 6

BW5 0.48 229 31 83 97 PCT 10 BW6 0.88 230 31 83 97 PCT 14 BW6

-0.82 231 31 83 97 PCT 15 BVW5

-0.78 232 31 83 149 PCT 18 BM' 1.11 233 31 83 155 PCT 10 08C

-0.74 234 31 84 140 PCT 8

0211 0.75 235 31 84 140 PCT 11 02H

-0.19 236 31 90 80 PCT 12 04H 0.88 237 31 92 134 PCT 9

03C 0.2 238 31 92 140 PCT 10 02H 0.79 239 31 93 83 PCT 14 BW9 1.72 to W3F17-2008-0074 Table D-3 Percent of Wall-Thickness Penetrations for SG31 - RF 15 6 of 7 Count SG ROW COL IND PER LOCN INCHI 240 31 95 145 PCT 19 09C 0.82 241 31 96 80 PCT 8

03H 0.88 242 31 98 100 PCT 13 041--

0.85 243 31 99 51 PCT 13 04H 0.37 244 31 99 117 PCT 14 BW4

-0.73 245 31 100 32 PCT 10 09H

-0.74 246 31 102 42 PCT 27 BW3

-0.88 247 31 103 75 PCT 10 02H 0.85 248 31 103 147 PCT 17 BW3 0.84 249 31 105 29 PCT 16 BW7

-0.71 250 31 105 31 PCT 16 BW7

-0.91 251 31 105 31 PCT 16 04C 0.82 252 31 105 35 PCT 25 BW5 1.01 253 31 105 45 PCT 14 BW7 0.96 254 31 105 53 PCT 17 BW3

-0.93 255 31 105 129 PCT 17 BW1 1.81 256 31 107 31 PCT 21 BW7

-0.83 257 31 107 81 PCT 14 BW3 0.66 258 31 108 74 PCT 17 BW3

-0.89 259 31 113 39 PCT 17 BW7 0.89 260 31 113 143 PCT 11 BW9 1.61 261 31 114 34 PCT 10 BW9 1.98 262 31 119 83 PCT 14 07('

-0.14 263 31 119 137 PCT 4

BW5 0.74 264 31 119 137 PCT 7

BW5

-0.12 265 31 121 91 PCT 11 02H

-0.84 266 31 123 45 PCT 14 02H 0.93 267 31 123 135 PCT 8

09H 0.95 268 31 125 57 PCT 18

080C, 0.98 269 31 127 129 PCT 20 BW2

-0.83 270 31 128 46 PCT 16 02H

-0.28 271 31 128 130 PCT 7

01H 0.73 272 31 129 59 PCT 19 BW3

-0.67 273 31 130 98 PCT 2

BWI

-1.72 274 31 131 51 PCT 10 10H

-0.99 275 31 131 51 PCT 18 10H 0.55 276 31 131 127 PCT 5

07H

-0.14 277 31 131 127 PCT 18 07H 0.92 278 31 132 124 PCT 7

08H 0.84 279 31 133 53 PCT 17 0910

-0.86 280 31 133 77 PCT 17 BW4

-0.82 281 31 133 77 PCT 18 BW3

-0.66 282 31 133 93 PCT 15 BW1

-1.42 283 31 133 121 PCT 10 BW3 0

284 31 133 121 PCT 11 BW2

-0.03 285 31 133 121 PCT 18 BW3

-0.47 286 31 133 121 PCT 18 BW4

-0.67 287 31 133 121 PCT 28 B"2

-0.74 to W3F1-2008-0074 Table D-3 Percent of Wall-Thickness Penetrations for SG31 - RF 15 7 of 7 Count SG ROW COL IND PER LOCN INCHI 288 31 133 121 PCT 35 BW2 1

289 31 133 125 PCT 19 070

-0.96 290 31 134 98 PCT 8

01 H

-0.05 291 31 134 120 PCT 16 01C 0.81 292 31 135 57 PCT 20 10H 0.62 293 31 135 65 PCT 18 BW8

-0.69 294 31 135 67 PCT 17 BW3

-0.83 295 31 135 119 PCT 3

BW2 0.09 296 31 135 119 PCT 6

BW7

-0.06 297 31 135 119 PCT 9

BW4

-0.4 298 31 135 119 PCT 13 BW7 0.83 299 31 135 119 PCT 21 BW7

-0.8 300 31 135 119 PCT 26 BW2 1.01 301 31 135 119 PCT 27 BW4 0.96 302 31 135 119 PCT 28 BW3 0.66 303 31 135 119 PCT 29 BW4

-0.77 304 31 135 119 PCT 34 BW2

-0.72 305 31 136 78 PCT 6

BW2

-1.09 306 31 137 65 PCT 19 BW4 0.85 307 31 138 60 PCT 12 09H

-1 308 31 138 62 PCT 20 01H 0.52 309 31 139 63 PCT 14 BW1

-1.58 310 31 139 93 PCT 10 BW1

-1.64 311 31 140 108 PCT 10 08H 0.82 312 31 141 105 PCT 24 09H

-0.37 313 31 141 113 PCT 21 BW9

-1.37 314 31 143 81 PCT 23 03H

-1.09 315 31 144 92 PCT 8

04H 0.76 to W3FI-2008-0074 I of 10 Table D-4 Percent of Wall Thickness Penetrations for SG32 - RFI5 Count SG ROW COL IND PER LOCN INCHI 1

32 19 3

PCT 16 BW5

-0.95 2

32 19 3

PCT 27 BW5 0.89 3

32 46 6

PCT 18 BW5

-0.73 4

32 2

8 PCT 13 BW9

-0.88 5

32 41 9

PCT 10 BW5

-0.19 6

32 44 10 PCT 15 BW5

-0.97 7

32 44 10 PCT 8

BWN5

-0.15 8

32 44 10 PCT 26 BW5 1.12 9

32 65 11 PCT 11 01C 0.03 10 32 67 11 PCT 32 BW6

-0.9 11 32 67 11 PCT 18 BW6 0.03 12 32 67 11 PCT 18 BW6 0.87 13 32 19 13 PCT 14 05H 0.29 14 32 23 15 PCT 14 BW5

-0.7 15 32 33 15 PCT 19 BW5

-0.98 16 32 44 16 PCT 33 BW'5

-0.78 17 32 44 16 PCT 22 BW5 0.99 18 32 80 16 PCT 9

BW'9 1.76 19 32 82 16 PCT 14 BW9

-1.75 20 32 35 17 PCT 13 BW5

-1 21 32 46 18 PCT 21 BW5

-0.88 22 32 46 18 PCT 17 BM5 0.82 23 32 48 18 PCT 38 BW5

-0.95 24 32 48 18 PCT 15 BW5 0

25 32 48 18 PCT 31 BM5 0.91 26 32 62 18 PCT 18 01 H 0.69 27 32 71 19 PCT 7

BW9 1.6 28 32 81 19 PCT 8

BW9 1.66 29 32 4

20 PCT 17 06,

-0.02 30 32 74 20 PCT 15 BW9

-1.89 31 32 80 20 PCT 16 BW9 1.29 32 32 90 20 PCT 24 091-1

-0.99 33 32 79 21 PCT 16 BW9 1.63 34 32 81 21 PCT 16 BW6

-0.76 35 32 81 21 PCT 8

BV9 1.35 36 32 82 22 PCT 8

BW9

-1.86 37 32 82 22 PCT 14 BW9 1.93 38 32 79 23 PCT 13 BW9 1.98 39 32 76 24 PCT 15 BW4

-0.95 40 32 76 24 PCT 17 BW5

-0.95 41 32 76 24 PCT 15 BW6 0.72 42 32 19 25 PCT 25 BVV5

-0.91 43 32 19 25 PCT 17 BW5 0.96 44 32 69 25 PCT 17 BVV6 0.83 45 32 71 25, PCT 5

BVV9 0.93 46 32 77 25 PCT 10 BW9 1.07 47 32 79 25 PCT 14 BW6 0.82 48 32 79 25 PCT 23 BW9 1.94 to W3F1-2008-0074 Table D-4 Percent of Wall Thickness Penetrations for SG32 - RF15 2 of 10 Count SG ROW COL IND PER LOU;NT INCHI 49 32 81 25 PCT 14 BW4

-0.65 50 32 81 25 PCT 12 BW9 1.71 51 32 101 25 PCT 5

BW1

-1.69 52 32 101 25 PCT 35 BWI 1.98 53 32 76 26 PCT 13 BW9 1.55 54 32 80 26 PCT 18 08C

-0.97 55 32 82 26 PCT 16 08C 0.78 56 32 82 26 PCT 13 BW5

-0.96 57 32 82 26 PCT 9

BM5 0.97 58 32 82 26 PCT 18 BW6

-0.83 59 32 82 26 PCT 26 BM6 0.97 60 32 1

27 PCT 10 06C 0.42 61 32 23 27 PCT 17 BW5

-0.8 62 32 79 27 PCT 26 BW9 1.86 63 32 81 27 PCT 15 BW4

-0.91 64 32 81 27 PCT 14 BW4 0.7 65 32 81 27 PCT 22 BW6 0.96 66 32 101 27 PCT 16 BW9 1.63 67 32 4

28 PCT 15 03C

-0.73 68 32 4

28 PCT 17 05C

-0.63 69 32 80 28 PCT 11 BW6

-0.86 70 32 80 28 PCT 17 BM6 1.04 71 32 82 28 PCT 12 BWV4

-0.62 72 32 82 28 PCT 7

BM4 0.86 73 32 82 28 PCT 14 BW5

-0.95 74 32 82 28 PCT 31 BW6 0.94 75 32 1

29 PCT 19 034:

0.83 76 32 1

29 PCT 10 04C 0.87 77 32 77 29 PCT 13 BW6

-0.83 78 32 77 29 PCT 24 BW6 0.89 79 32 48 30 PCT 16 BW5

-0.75 80 32 48 30 PCT 12 BW5 0.84 81 32 94 30 PCT 25 09C 0

82 32 94 30 PCT 16 09C 1.04 83 32 1

31 PCT 13 030

-0.84 84 32 1

31 PCT 10 030 0.86 85 32 1

31 PCT 9

050

-0.33 86 32 3

31 PCT 23 05C 0.75 87 32 43 31 PCT 13 BVV5

-0.63 88 32 107 31 PCT 11 BWV

-1.16 89 32 107 31 PCT 15 BW9 1.36 90 32 109 31 PCT 16 BVI1

-1.27 91 32 109 31 PCT 7

BW1 1.66 92 32 4

32 PCT 14 05C

-0.83 93 32 46 32 PCT 24 BWV5

-0.81 94 32 46 32 PCT 9

BW5 0.19 95 32 46 32 PCT 11 BVV5 0.87 96 32 68 32 PCT 15 BWV9

-1.62 97 32 76 32 PCT 8

BA9

-1.75 to W3F1-2008-0074 3 of 10 Table D-4 Percent of Wall Thickness Penetrations for SG32 - RF1 5 Count SG ROW COL IND PER LOCN INCHI 98 32 33 33 PCT 20 BW5

-0.81 99 32 67 33 PCT 16 BW9 1.29 100 32 79 33 PCT 11 BW9 1.47 101 32 81 33 PCT 23 BW5

-0.72 102 32 81 33 PCT 24 BW5 0.97 103 32 81 33 PCT 15 BW9 1.72 104 32 83 33 PCT 13 BW5 0.85 105 32 59 35 PCT 8

BW6 0

106 32 59 35 PCT 31 BW6 0.87 107 32 69 35 PCT 18 BW5 0.87 108 32 83 35 PCT 27 BW5 1

109 32 83 35 PCT 22 BW7

-0.73 110 32 83 35 PCT 20 BW7 1.01 ill 32 111 35 PCT 20 09H

-0.77 112 32 100 36 PCT 11 BW'5

-0.81 113 32 108 36 PCT 20 BW1 1.58 114 32 43 37 PCT 25 BW5

-0.9 115 32 43 37 PCT 19 BW'5 0.84 116 32 77 37 PCT 14 BW4

-0.84 117 32 77 37 PCT 18 BW4 0.9 118 32 77 37 PCT 16 BW5

-0.99 119 32 77 37 PCT 21 BW5 0.69 120 32 111 37 PCT 16 BW1 2.09 121 32 41 39 PCT 18 BW5 0.96 122 32 115 39 PCT 7

BW9 1.63 123 32 117 39 PCT 16 BVv5

-1.03 124 32 44 40 PCT 22 BVA5

-1.01 125 32 44 40 PCT 7

B"V5 0.12 126 32 44 40 PCT 14 BVV5 0.85 127 32 46 40 PCT 11 BW5 0.67 128 32 94 40 PCT 28 BW3

-0.84 129 32 94 40 PCT 10 BW4

-0.93 130 32 94 40 PCT 13 BVW5

-0.84 131 32 94 40 PCT 9

B"W5 0.92 132 32 94 40 PCT 11 BM6

-0.86 133 32 94 40 PCT 26 BVV6 0.94 134 32 81 41 PCT 33 BW5

-0.82 135 32 81 41 PCT 33 BW5 0.94 136 32 81 41 PCT 28 BW6

-0.83 137 32 81 41 PCT 8

BVW6 0.89 138 32 83 41 PCT 14 BW3 0.88 139 32 2

42 PCT 15 050

-0.92 140 32 82 42 PCT 21 080 0.78 141 32 96 42 PCT 18 BVV3

-0.82 142 32 96 42 PCT 10 BVV3 0.85 143 32 96 42 PCT 23 BVA5

-0.81 144 32 114 42 PCT 17 080 0.81 145 32 113 43 PCT 12 BW9 1.27 146 32 119 43 PCT 9

080

-0.03 to W3F1-2008-0074 4 of 10 Table D-4 Percent of Wall Thickness Penetrations for SG32 - R F15 Count SG ROW COL IND PER LOCN INCHI 147 32 119 43 PCT 13 08C 0.84 148 32 125 43 PCT 21 03C 0.73 149 32 2

44 PCT 18 031-H 0.84 150 32 22 44 PCT 12 BM5

-0.82 151 32 124 44 PCT 12 BW6 0.79 152 32 1

45 PCT 17 040

-0.22 153 32 1

45 PCT 11 040 0.78 154 32 67 45 PCT 19 BV5 0.95 155 32 109 45 PCT 14 BW6

-0.53 156 32 127 45 PCT 16 02C 0.74 157 32 48 46 PCT 18 BW5

-0.84 158 32 48 46 PCT 8

BW5 0.88 159 32 80 46 PCT 29 08C

-0.9 160 32 1

47 PCT 14 05C

-0.87 161 32 1

47 PCT 30 05C 0.92 162 32 43 47 PCT 13 BW5

-0.95 163 32 44 48 PCT 20 BW5 0.99

.164 32 80 48 PCT 33 BW5

-0.82 165 32 126 48 PCT 13 090

-1.12 166 32 3

49 PCT 14 05C

-1.06 167 32 77 49 PCT 16 BW5 0.85 168 32 79 49 PCT 16 BW6

-0.43 169 32 81 49 PCT 14

070,

-0.9 170 32 81 49 PCT 27 081 0.85 171 32 81 49 PCT 27 BW5 0.96 172 32 81 49 PCT 22 BM6

-0.72 173 32 81 49 PCT 6

BW6 0.18 174 32 81 49 PCT 13 BW6 0.78 175 32 44 50 PCT 18 BW5

-0.73 176 32 56 50 PCT 13 050 0.84 177 32 1

51 PCT 17 04.0 0.7 178 32 47 51 PCT 17 BVV5 0.88 179 32 77 51 PCT 26 BVW4

-0.82 180 32 77 51 PCT 27 BW6

-0.75 181 32 77 51 PCT 14 BW6 0

182 32 77 51 PCT 11 BWV6 0.76 183 32 83 51 PCT 12 BW7 1.09 184 32 44 52 PCT 24 BW5

-0.95 185 32 44 52 PCT 17 BW5 0.71 186 32 46 52 PCT 23 BW5

-0.82 187 32 48 52 PCT 16 BVW5

-0.9 188 32 134 52 PCT 12 08C

-1.06 189 32 134 52 PCT 11 BVV1 1.69 190 32 134 52 PCT 12 BW2 1

191 32 134 52 PCT 15 BVW9 1.32 192 32 1

53 PCT 15 040

-0.89 193 32 35 53 PCT 14 BW5

-0.87 194 32 35 53 PCT 12 BW5 1.05 195 32 69 53 PCT 9

BW9 1.78 to W3F1-2008-0074 5 of 10 Table D-4 Percent of Wall Thickness Penetrations for SG32 - RF15 Count SG ROW COL IND PER LOCN INCHI 196 32 73 53 PCT 19 BW5

-0.88 197 32 73 53 PCT 25 BW5 0.79 198 32 73 53 PCT 33 BW6

-0.85 199 32 73 53 PCT 17 BW6 0.15 200 32 73 53 PCT 24 BW6 0.73 201 32 36 54 PCT 18 BW5

-0.95 202 32 82 54 PCT 25 BW4 0.82 203 32 114 54 PCT 23 BW7 0.93 204 32 81 55 PCT 18 BW5 0.95 205 32 107 55 PCT 26 B"W5 0

206 32 107 55 PCT 24 B"W5 0.79 207 32 107 55 PCT 23 BW6

-0.93 208 32 129 55 PCT 18 09C 0.92 209 32 24 56 PCT 13 BW5

-0.88 210 32 94 56 PCT 12 BW3

-0.83 211 32 94 56 PCT 16 BM4

-0.86 212 32 94 56 PCT 15 BW5 0.87 213 32 51 57 PCT 12 BW6 1.14 214 32 73 57 PCT 11 BW5

-0.72 215 32 73 57 PCT 7

BW5 1.03 216 32 73 57 PCT 4

BW6 0

217 32 73 57 PCT 11 BVW6 0.62 218 32 73 57 PCT 27 BW6 0.82 219 32 77 57 PCT 18 BWM

-0.78 220 32 77 57 PCT 13 BW6

-0.7 221 32 81 57 PCT 29 BW4

-0.72 222 32 81 57 PCT 13 BW4 0.18 223 32 81 57 PCT 14 BVV4 0.75 224 32 81 57 PCT 17 BV5

-0.84 225 32 81 57 PCT 10 BVV5 0.66 226 32 81 57 PCT 16 BV6 0.66 227 32 81 57 PCT 10 BVW6 0.95 228 32 83 57 PCT 21 BVV3

-0.82 229 32 83 57 PCT 16 BW5

-0.72 230 32 83 57 PCT 6

BVV5 0.8 231 32 43 59 PCT 16 BW5

-0.76 232 32 43 59 PCT 22 BVV5 0.92 233 32 83 59 PCT 18 BVV7

-0.89 234 32 41 61 PCT 12 BW/5 0.82 235 32 77 61 PCT 32 BVW4

-0.77 236 32 77 61 PCT 28 BVW4 0.97 237 32 133 61 PCT 14 BVV3 0.61 238 32 133 61 PCT -

22 BW/5 0.85 239 32 137 61 PCT 15 091C

-0.7 240 32 41 63 PCT 9

BW9 1.77 241 32 43 63 PCT 26 BW5 0.76 242 32 137 63 PCT 13 090C

-0.66 243 32 46 64 PCT 18 BW/5

-0.68 244 32 46 64 PCT 11 BV5 0

to W3F1-2008-0074 6 of 10

. Table D-4 Percent of Wall Thickness Penetrations for SG32 - RF15 Count SG ROW COL IND PER LOCN INCH1 245 32 46 64 PCT 37 BW5 0.97 246 32 82 64 PCT 22 BM4

-0.68 247 32 82 64 PCT 34 BM4 0.06 248 32 82 64 PCT 39 BW4 0.88 249 32 82 64 PCT 29 BVW6

-0.72 250 32 82 64 PCT 16 BWV6 0.03 251 32 82 64 PCT 16 BW6 0.72 252 32 92 64 PCT 24 BW5 1.1 253 32 118 64 PCT 13 04H 0.81 254 32 37 65 PCT 12 BW5

-0.82 255 32 37 65 PCT 5

BVA5 0

256 32 119 67 PCT 15 090 0.06 257 32 141 69 PCT 17 BW5

-0.91 258 32 141 69 PCT 10 BV5 0.95 259 32 141 69 PCT 15 BVV7 0.68 260 32 77 71 PCT 18 BVV4 0.92 261 32 77 71 PCT 14 BV5 0.85 262 32 77 71 PCT 15 BVW6 0.94 263 32 139 71 PCT 16 BW2

-0.89 264 32 92 72 PCT 20 BW5

-0.82 265 32 141 73 PCT 10 05H

-0.15 266 32 141 73 PCT 9

BW1

-1.69 267 32 141 75 PCT 15 BWI1 1.88 268 32 143 77 PCT 15 BW2

-0.84 269 32 110 78 PCT 16 B\\V6

-0.89 270 32 112 80 PCT 17 B\\A3

-0.8 271 32 112 80 PCT 12 BVV3 0.86 272 32 105 83 PCT 17 080 1.02 273 32 143 87 PCT 10 09H 0.96 274 32 105 89 PCT 22 BVV5 0.88 275 32 143 89 PCT 12 091-1 0.94 276 32 145 89 PCT 15 08C

-0.99 277 32 145 89 PCT 14 08C 0.88 278 32 145 89 PCT 15 BW4

-0.92 279 32 145 89 PCT 18 BW7

-0.83 280 32 145 89 PCT 28 BW8

-0.85 281 32 145 89 PCT 23 BW8 0.79 282 32 67 91 PCT 7

BW9 3.5 283 32 81 91 PCT 13 BW4 0.98 284 32 81 91 PCT 10 BW5 1.04 285 32 111 91 PCT 17 08C 0.93 286 32 119 91 PCT 22 08C

-0.81 287 32 66 92 PCT 10 BW9

-1.26 288 32 66 92 PCT 5

BW9 0.43 289 32 65 93 PCT 4

BW9 3.64 290 32 69 93 PCT 11 BW9 0.12 291 32 81 93 PCT 17 BW4

-0.89 292 32 81 93 PCT 13 BWV4 0.82 293 32 64 94 PCT 8

BW9 3.25 to W3FI-2008-0074 7 of 10 Table D-4 Percent of Wall Thickness Penetrations for SG32 - RF1 5 Count SG ROW COL IND PER LOCN INCHI 294 32 68 94 PCT 14 BW9 2.98 295 32 76 94 PCT 15 080

-0.88 296 32 98 94 PCT 15 BVW9 2.93 297 32 79 95 PCT 14 BW4

-0.86 298 32 79 95 PCT 12 BW4 0.88 299 32 145 95 PCT 25 BW8

-0.77 300 32 145 95 PCT 14 BW8 0.89 301 32 64 96 PCT 8

BW9 3.07 302 32 66 96 PCT 21 BW1 2.07 303 32 68 96 PCT 8

BW9 0.61 304 32 67 97 PCT 15 021H

-0.72 305 32 67 97 PCT 13 BW9 3.18 306 32 81 97 PCT 23 BW4 0.95 307 32 81 97 PCT 10 BW5

-0.68 308 32 81 97 PCT 28 BW5 0.95 309 32 81 97 PCT 16 BW6

-0.67 310 32 81 97 PCT 10 BW9 0.03 311 32 68 98 PCT 6

BW9 0.49 312 32 72 98 PCT 16 BW9 0.26 313 32 79 99 PCT 20 BW4

-0.76 314 32 79 99 PCT 18 BW5 0.09 315 32 79 99 PCT 14 BW5 0.85 316 32 68 100 PCT 13 BW9 2.13 317 32 144 100 PCT 10 BW9

-1.82 318 32 143 103 PCT 18 BW9

-1.83 319 32 114 106 PCT 20 BW4

-0.11 320 32 77 107 PCT 19 BW4

-0.57 321 32 77 107 PCT 24 BW5

-0.51 322 32 77 107 PCT 37 BW5 0.23 323 32 77 107 PCT 37 BW5 0.9 324 32 77 107 PCT 23 BW6

-0.69 325 32 77 107 PCT 23 BW6 0

326 32 83 107 PCT 20 BW3

-0.79 327 32 119 107 PCT 18 080

-0.9 328 32 92 108 PCT 17 060

-0.79 329 32 77 109 PCT 23 BW6 0.8 330 32 113 109 PCT 23 BW3 0.84 331 32 115 109 PCT 14 BW8 0.86 332 32 50 110 PCT 23 BW5

-0.83 333 32 50 110 PCT 11 BVV5 0.61 334 32 82 110 PCT 16 BVW5

-0.91 335 32 82 110 PCT 17 BVW6 0.75 336 32 41 111 PCT 27 BW5 0.97 337 32 99 111 PCT 13 BW3 1.07 338 32 32 112 PCT 9

BVW5

-0.91 339 32 32 112 PCT 17 BVW5 0.87 340 32 36 112 PCT 12 BVV5

-0.91 341 32 38 112 PCT 16 05,03

-0.75 342 32 82 112 PCT 12 BVV6 0.86 to W3F1-2008-0074 8 of 10 Table D-4 Percent of Wall Thickness Penetrations for SG32 - RF15 Count SG ROW COL IND PER LOC;N INCHI 343 32 100 112 PCT 17 08C 0.73 344 32 114 112 PCT 13 BVW3 1.09 345 32 81 113 PCT 24 BW4 0.74 346 32 135 113 PCT 22 BVW8

-0.06 347 32 98 114 PCT 18 08C 0.86 348 32 25 115 PCT 11 BVW5

-0.83 349 32 123 115 PCT 14 08C

-0.92 350 32 123 115 PCT 7

08C 0.86 351 32 127 115 PCT 13 081

-0.47 352 32 40 116 PCT 18 BW5 0.97 353 32 46 116 PCT 24 BVW5 0.9 354 32 106 116 PCT 16 BW7

-0.82 355 32 19 117 PCT 19 BW5

-0.99 356 32 29 117 PCT 14 060*

0.8 357 32 77 117 PCT 34 BWV6

-0.79 358 32 77 117 PCT 23 BW6 0.91 359 32 133 117 PCT 19 BW3 0.99 360 32 74 118 PCT 28 BW4

-0.66 361 32 74 118 PCT 32 BW5

-0.72 362 32 74 118 PCT 15 BW6

-0.59 363 32 74 118 PCT 18 BW16 0.82 364 32 2

122 PCT 12 01C 1

365 32 40 122 PCT 14 BW5

-0.83 366 32 40 122 PCT 15 BW5 0.9 367 32 104 122 PCT 19 BW3

-0.9 368 32 113 123 PCT 15 BW3 0.94 369 32 37 125 PCT 17 BW5

-1 370 32 81 125 PCT 12 BW4 0.87 371 32 127 125 PCT 12 060

-0.75 372 32 133 125 PCT 14 020 0.81 373 32 133 125 PCT 19 040 0.65 374 32 2

126 PCT 15 05(0

-0.79 375 32 41 127 PCT 17 BW5 0.98 376 32 22 128 PCT 11 0211 0.89 377 32 82 128 PCT 11 BW5

-0.74 378 32 82 128 PCT 28 BW5 0.87 379 32 82 128 PCT 18 BM6 0.78 380 32 43 129 PCT 16 BWM

-0.78 381 32 43 129 PCT 14 BW5 0.87 382 32 81 129 PCT 15 08H

-0.73 383 32 83 131 PCT 16 BW7 1

384 32 125 131 PCT 20 02C 0.84 385 32 126 132 PCT 11 10H

-0.6 386 32 111 133 PCT 16 BW3 0.89 387 32 123 133 PCT 14 03(0 0.89 388 32 125 133 PCT 14 BW4

-0.88 389 32 100 134 PCT 13 07(

-0.22 390 32 1

135 PCT 14 04(03 0.71 391 32 92 136 PCT 21 070 0.8 to W3F1-2008-0074 9 of 10 Table D-4 Percent of Wall Thickness Penetrations for SG32 - RF15 Count SG ROW COL IND PER LOCN INCH1 392 32 92 136 PCT 19 BW4

-0.76 393 32 109 137 PCT 19 08C 0.92 394 32 41 139 PCT 19 BW5 0.94 395 32 79 139 PCT 19 080Co

-0.09 396 32 79 139 PCT 11

080, 0.78 397 32 80 140 PCT 15 BW9 1.98 398 32 84 140 PCT 13 BW9

-1.86 399 32 23 141 PCT 13 03H 0.97 400 32 37 141 PCT 20 BVW5

-0.96 401 32 109 141 PCT 15 BVV5 0.98 402 32 50 142 PCT 21 BW5

-0.86 403 32 66 142 PCT 19 08C 0.8 404 32 106 142 PCT 13 0911 1.19 405 32 105 143 PCT 21 091-1

-0.83 406 32 105 143 PCT 11 091-1 0.24 407 32 105 143 PCT 18 BW3 1.03 408 32 105 143 PCT 15 BW6

-0.72 409 32 82 144 PCT 22 BW5 0.8 410 32 96 144 PCT 16 080O

-0.89 411 32 104 144 PCT 13 041-1 1.01 412 32 45 145 PCT 30 BW5

-0.83 413 32 45 145 PCT 22 BW5 0.8 414 32 109 145 PCT 11 091-1 1.15 415 32 84 146 PCT 12 BW9

-1.74 416 32 47 147 PCT 18 BW5

-0.8 417 32 47 147 PCT 23 BW5 1.01 418 32 91 147 PCT 16 090

-0.95 419 32 103 147 PCT 15

090,

-1.03 420 32 82 148 PCT 17 BW4

-0.59 421 32 41 149 PCT 39 BW5 0.92 422 32 43 149 PCT 20 BW5 1.05 423 32 49 149 PCT 11 BW5 0.09 424 32 49 149 PCT 30 BW5 0.9 425 32 101 149 PCT 20 090

-0.97 426 32 101 149 PCT 25

09C, 0.93 427 32 103 149 PCT 16 021-1 1.02 428 32 103 149 PCT 30 091

-0.18 429 32 103 149 PCT 12 0911 0.92 430 32 80 150 PCT 13 081-1 0.95 431 32 96 152 PCT 12 091-1

-0.8 432 32 96 152 PCT 7

0911 0

433 32 40 154 PCT 24 BW5 0.96 434 32 37 155 PCT 25 BW5

-1.03 435 32 66 156 PCT 21 08C

-0.47 436 32 37 157 PCT 20 BW5

-0.89 437 32 37 157 PCT 12 BW5 0.95 438 32 85 157 PCT 11 090

-1.09 439 32 86 158 PCT 6

090 0

440 32 86 158 PCT 15 090 0.8 to W3F1-2008-0074 Table D-4 Percent of Wall Thickness Penetrations for SG32 - RF15 10 of 10 Count SG ROW COL IND PER LOCN INCHI 441 32 86 158 PCT 17 BW9 1.84 442 32 79 159 PCT 12 BW19 1.67 443 32 83 159 PCT 12

08C, 0.89 444 32 83 159 PCT 10 BW9

-1.22 445 32 83 159 PCT 33 BW9 1.58 446 32 24 160 PCT 18 031-1 0.89 447 32 70 160 PCT 10 08C0

-1.05 448 32 70 160 PCT 23 08C 0.56 449 32 78 160 PCT 24 BWV9 1.8 450 32 80 160 PCT 25 BW9 1.52 451 32 1

161 PCT 6

070

-0.36 452 32 76 162 PCT 12 BW1

-1.58 453 32 76 162 PCT 21 BW9 1.53 454 32 14 164 PCT 15 04C0

-0.35 455 32 41 167 PCT 14 BW5 0.79 456 32 45 167 PCT 22 BW5

-0.6 457 32 34 170 PCT 15 BW5 0.95 458 32 18 174 PCT 17 025

-0.91 459 32 20 174 PCT 10 BW5

-0.79 460 32 1

175 PCT 20 01 1 0.13 461 32 3

175 PCT 13 0111

-0.63 462 32 11 175 PCT 25 BW1 1.75