Text

Indian Point Energy Center - Hydrogeologic Site Investigation Report - Appendix J Through M
	ML080350542
Person / Time
Site:	Indian Point
Issue date:	01/07/2008
From:	; GZA GeoEnvironmental
To:	; Office of Nuclear Reactor Regulation
References
	FOIA/PA-2010-0209, NL-08-009
	Download: ML080350542 (416)
	v • d • e

APPENDIX J LOW FLOW SAMPLING LOGS WELL ID: MW-30 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy- IPEC SITE: Buchanan, NY PROJECT NO: 41.0017869.10 DATE: 1/30/06 SAMPLER(S):

S. Covelli WATER QUALITY: Depth to Specific Dissolved

.ate Pump Time Water Conductivity Oxygen Temp (C) ORP. Notes.(f) (SU) (uS/cm) (NT (mg/) (mL/min) Depth (f)1455- 65.00 .-start pumnp 1457 65.70 7.64 15.50 550 4.58 23.30 73 400 1503 65.80 7.67 10.00 550 4.72 23.80 98 400 83 1505 sample taken 1511 65.40 7.73 5.02 540 5.33 21.80 150 200 1517 65.60 7.71 4.71 550 4.82 21.80 93 400 1522 65.75 " 7.71 1 3.74 550 4.56 23.40 79 400 1523 sample taken 1528 66.00 7.71 37.30 540 3.31 24.20 94 300 1533 65.75 7.71 10.95 540 3.33 22.80 93 300" 1538 65.80 7.71 11.10 540 2.93 23.60 86 300 1540 sample taken 1542 66.10 7.70 13.20 540 2.72 24.70 80 350 1547 65.90 7.71 12.50 540 2.62 24.30 83 350 72 1552 65.95 7.70 13.60 540 2.34 24.60 77 350 1555 , sample taken NOTES AND OBSERVATIONS:

WELL ID: MW-30 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet 0 CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: 41.0017869.10 DATE: 2/7/06 SAMPLER(S):

S. Covelli WATER QUALITY: Time Depth to pH Specific Dissolved Notes Time Dpter to pH (SU) Conductivity Turbidity Oxygen Temp CC) ORP Rate Pump Notes Water (ft) (us/ciri) (NTU) (mg/I) (mL/min) Depth (ft)1040 64.73 7.72 2.12 760 7.72 20.60 112 100 1103 65.83 7.86 0.90 750 11.17 24.20 192 100 1116. 66.70 8.01 34.50 750 2.45 25.70 -151 200 1123 66.60. 8.04 8.13 740 3.26 22.20 -129 100 72 1126

8.03 6.63 750 ** ** ** **1132

8.01 3.47 750 2.30 23.80 -165 100 1137

8.05 2.52 770 5.26 22.60 -165 150 I Ii I iii ~ I I I I.. 4 4 + 4 4 4 + 4 4 L I A .I-* *4 4 4 .4- 4 NOTES AND OBSERVATIONS:

Depth to water readings discontinued due to difficulty maintaining low flow.** Pumping ceased before readings could be taken.Samples were taken at 1140 hours0.0132 days 0.317 hours 0.00188 weeks 4.3377e-4 months , 1145 hours0.0133 days 0.318 hours 0.00189 weeks 4.356725e-4 months , and 1149 hours0.0133 days 0.319 hours 0.0019 weeks 4.371945e-4 months .

WELL ID: MW-30 GZA GeoEnvironmental of New York*Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 3/10/06 S. Covelli WATER QUALITY: Depth to Specific Turbidity Dissolved Rate Pump Time pH (SU) Conductivity (NTU) Oxygen Temp (`C) ORP (mL/min) Depth (ft)Water (fi) (uS/cm) _____ (mg/1)1500 68.40 Pump on 1507 68.90 .6.91 .1.87 / 8.99 22.50 272 400 flow achieved 1512 69.05 7.10 2.31 / 7.51 24.50 240. 400 72 1515 69.10 7.20 .2.46 / 6.94 25.40 229 400 1517 69.20 7.27 2.61 / 6.51 25.70 221 400 sample taken NOTES AND OBSERVATIONS:

WELL ID: MW-30 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT:, Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 3/13/06 S. Covelli WATER QUALITY: Depth to pH Specific Dissolved Rate Pump CodciiyTurbidity Rt PupNotes Tie Wato (N Conductivity Oxygen Temp (CC) ORP (mL/min) Depth (ft)Time Water (ft) (SU) (uS/cm) (mg/I)924 68.35 pump on 934 68.85 7.84 2.14 / 6.99 22.90 155 400 flow achieved.939 69.25 7.77 3.91 / 5.53 24.50 146 400 944 69.40 7.79 3.60 I 5.45 24.40 141 400 949 69.45 7.78 3.07 / 5.50 24.50 123 400 ___......

_" _954 69.50 7.84 2.73 / 5.56 24.60 119 400 83 959 69.60 7.68 2.63 / 5.52 24.70 141 400 1004 69.70 7.49 2.47 / 5.54 24.80 147 400 1009 69.75 7.52 2.46 / 5.43 24.80 150 400 1013 sample taken 1022 69.85 7.62 3.20 / 4.53 24.70 135 350 1045. 69.75 7.74 2.58 / 2:31 25.10 106 350 1050. 69.77 7.75 3.42 2;17 25.20 102 350 78 1055 69.77 7.86 3.68 / 2.09 25.20 83 325 1100 .69.74 7.76 3.73 / 1.96 25.20 94 325 1102 .sample taken 1114 69.75 7.72 3.48 I 1.58 24.70 94 325 1120 69.75 7.69 382 / 1.55 24.90 97 325 1125 69.77 7.73 2.59 / 1.52 25.30 88 .325 1132 69.75 7.97 3.77 I 1.39 25.60 68 325 74 1139 .69.77 7.85 3.74 / 1.33 25.70 79 350 1144 69.78 7.83 3.67 / 1.32 25.90 67 350 1145___ _sample taken NOTES AND OBSERVATIONS:

WELL ID: MW-30 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 6/22/06 S. Covelli WATER QUALITY: Depth to pH Specific Turbidity Dissolved Rate Pump Time Watere(ft) (SU)P Conductivity (NTU) Oxygen Temp (C) ORP (mL/min) Depth (ft). Notes Wate ~ ~ (uS/cm) (N~J (Mg/mL) mlinf)946 67.55 pump on 952 67.85 6.97 1.90 5.8 7.55 25.00 166 100 1003 68.01 6.71 1.50 4.6 5.96 25.70 126 650 1010 67.95 6.70 1.50 3.2 5.21 26.00 112 225 1021 68.11 6.69 1.50 2.9 5.20 26.40 111 175 83 1031 68.15 6.69 1.50 3.5 5.16 26.50 112 160 1047 68.21 6.68 1.50 5.2 4.99 26.70 112 100 1050 .sample taken 1135 67.75 pump on 1139 68.12 6.91 1.40 1.2 7.74 26.70 149 150 1257 67.89 6.71 1.40 0 5.63 28.50 151 75 78 1306 67.97 6.71. .40 0 5.38 27.70 148 90 1315 68.07 6.71 1.40 0 4.99 27.70 145 215 1320 sample taken NOTES AND OBSERVATIONS:

WELL ID: MW-30 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 6/23/06 S. Covelli WATER QUALITY: e Specific Dissolved Rate Pump Notes Time Der t p Conductivity Tur Oxygen Temp (eC) ORP (mL/min) Depth (ft)Water (ft) (SU) (uS/cm) (NTU) (mg)836 67.67 pump on 842 68.15 6.71 1.40 2.1 5.13 25.20 176 215 850 .68.22 6.61 1.40 1.9 4.51 26.30 139 190 901 68.19 6.78 1.40 0.9 4.37 28.10 125 175 913 68.26 .6.75 1.40 1.9 4.14 28.50 123 160 74 931 68.37 6.75 1.30 6.4 3.88 29.20 107 190 948 68.39 6.75 1.30 18.8 3.73 29.40 100 230 956 68.45 6.74 1.30 26.9 3.66 29.40 92 200 1000 __ sample taken 1101 67.86 pump on 1105. 68.52 6.71 .. 1.30 .0 4.34 26.10 112 600 1113 68,82 6.70 1.40 0 3.28 28.30 76 400 72 1247 69.00 6.74 1.30 0 3.23 29.60 67 325 1259- 69.05 6.74- 1.30 0 3.23 29.60 69 300 1303 I sample taken NOTES AND OBSERVATIONS:

WELL ID: MW-30-74 GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY WEATHER: overcast, low 80's PROJECT NO: 41.0017869.10 DATE: 8/18/2006 SAMPLER(S):

S. Kline / S. Covelli GALLONS OF WATER PER WELL VOLUME: Well Volume = Water Column.(T) (fit) x Multiplier

= (4 x 0.653) -(4 x 0.163)Well Volume (V) = 1.96 (Gallons)TOTAL VOLUME PURGED: weil diametr'multiple_r Design= 2.94 (gallons) 2 0.163 Actual = 6 (gallons) 4 0.653 PURGE RATE: variable (gal / min) 6 1.469 PURGE METHOD: Bladder pump SCREENED INTERVAL:

71.2-75.2 WATER QUALITYi Elapsed Purged Depth to pH Specific Turbidity Dissolved Temp Drive/ent Drive Time Time Volume Water Conductivity Oxygen ORP Pressure (SU) (NTU) 0x)(gends (min) (gal) (ft) (mS/cm) (mg/1) (_C) (seconds) (psi)1013 0 0.00 67.62 21.3 1030 0 0.00 pump on 1053 23 0.25 67.77 7.97 40.6 31 9.9 21.3 210 12/24 23 1109 39 0.50 67.79 8.06 43.3 21 10.0 21.4 202 12/18 23 1115 45 , 0.60 67.8 8.01 52.6 21 9.7 21.3 189 12/18 23 1122 52 0.75 67.81 8.08 39.1 14 9.9 .21.3 193 12/18 23 1129 59 0.85 67.84 8.09 38.1 25 9.9 21.3 190 12/12 30 1138 68 1.00 67.82 8.10 37.5 33 10.0 21.3 176 12/12 30 1154 84 1.25 67.83 8.06 58.2 17 9.8 21.3 204 6/24 32 1320 170 3.50 68.12 7.92 90.0 26 10.0 .21.3 246 3/7 32 1332 .182 4.00 68.12 7.95 90.0 27 10.0 21.4 244 3/7 32 1340 .190 4.25 68.12 7.96 94.0 10 10.0 21.4 241 3/7 32 1350 200 4.50 68.14 7.97 94.0 53 10.1 21.3 242 3/7 32 1357 ,207 4.75 68.15 8.01 96.0 8 10.1 21.3 243 3/7 32 1400 210 4.90 68.16 sample taken *1408 218 5.00 68.16 7.95 92.0 12 10.0 21.3 1 249 3/7 32 1427 235 5.50 68.17 7.99 95.0 24 10.1 21.3 244 3/7 32 1434 242 5.90 68.17 8.01 96.0 13 10.1 21.3 247 3/7 32 1439 247 6.00 68.17 p um off NOTES AND OBSERVATIONS:

Sampling Depth: 74 feet below grade* A one gallon sample was taken and split into three 1 liter bottles.

GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet, WELL ID: MW-30-87 CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: 41.0017869.10 DATE: 8/21/2006 SAMPLER(S):

S. Kline/ S. Covelli 0 WEATHER: sunny, low 80's GALLONS OF WATER PER WELL VOLUME: Well Volume = Water Column (T) (ft) x Multiplier

=(8 x 0.653) -(8 x 0.163)Well Volume (V) = 3.92 (Gallons)TOTAL VOLUME PURGED: well diameter multiplier Design = 5.88 (gallons) 2 " 163-Actual = 5.50 (gallons) 4 0.653 PURGE RATE: variable (gal /min) 6 1.469 PURGE METHOD: Bladder pump SCREENED INTERVAL:

81.2-89.2 WATER QUALITY:* Elapsed* Purged Depth to p Specific Dissolved Drive/Vent Drive Time Water Conductivity Turbidity Oxygen Temp CC) ORP Pressure I -(fme Vu It ;/cm) ý I (SU) (uS/cm )s)(min) (gal) (fI) (u/m (mg/I) (psi)8/21/2006 8:10 0 0.00 68.65 20.2 ..8:28 0 0.00 68.64 pump on 3/7 38 8:38 10 0.00 73.21 7.85 0.0 79 9.3 20.2 145 3/3 38 8:44 26 0.00 79.19 7.41 0.0 2 9.2 20.2 .144, 10/10 40 8:54 36 0.15 83.19 8.24 0.5 280 10.1 20.2 184 10/10 46 9:04 46 0.25 84.71 8.32 83.6 200 10.1 20.3 187 10/10 46 9:14 56 0.37 83.34 8.24 95.0 120 10.0 20.3 180 10/10 46 9:24 66 0.50 83.55 8.27 92.2 120 10.1 20.2 175 -10/10 46 9:54 96 0.90 82.86 8.29 44.4 60 10.1 20.2 167 10/10 46 10:14 116 1.25 83.27 8.30 45.9 59 10.1 20.2 169 10/10 46 10:34 136 1.50 83.55 8.33 90.0 62 10.2 20.3 167 10/10 46 11:18 180 2.25 82.37 8.28 90.0 31 10.1 20.3 181 10/10 46 11:28 190 2.37 82.56 8.26 90.0 85 10.1 20:2 180 10/10 .46 11:38 200 2.50 82.23 8.26 90.0 120 10.1 20.2 182 10/10 46 11:48 210 2.65 85.73 8.24 90.0 80 1 0.1 20.2 186 7/7 46 11:58 220 2.75 85.12 8.40 86.6 210 10.2 20.2 196 10/10 46 12:58 280 3.00 85.54 8.21 52.7 150 10.2 .20.1 199 10/10 42 13:18 300 3.05 85.39 8.21 101.0 510 10.2 20.1 194 10/10 46 13:28 310 3.06 85.17 8.17 29.9 66 10.0 20.0 200 10/10 46 13:38 320 3.13 85.03 8.16 45.5 62 10.0 20.0 213 10/24 46 13:48 330 3.15 84.27 8.12 26.0 67 10.1 20.0 212 10/24 46 13:58 340 3.22 85.41 8.14 28.8 74 10.1 20.1 204 10/10 46 14:08 360 3.25 85.40 8.08 90.0 100 10.1 10.1 205 10/10 46 14:40 392 3.30 84.73 8.07 0.7 75 10.0 20.0 212 10/10 46 14:43 pump off 8/22/2006 9:01 0 3.30 68.21 1 1 20.0 9:11 0 3.30 68.21 pump on 10/10 46 9:15 4 3.50 75.56 8.03 99.0 280 10.4 20.0 209 10/10 46 9:25 14 3.80 82.53 8.17 90.0 220 10.1 20.0 225 10/10 46 9:38 27 4.00 83.84 8.13 108.0 230 10.2 20.1 236 10/10 46.9:48 37 4.25 83.91 8.08 107.0 240 10.2 20.0 240 10/10 46 9:58 47 4.40 83.75 8.07 108.0 220 10.1 20.0 243 10/10 46 10:08 57 4.55 84.02 8.03 90.0 450 10.1 20.0 246 7/3 46 10:18 67 4.65 85.52 7.96 90.0 210 10.1 20.0 244 7/3 46 10:26 75 4.80 85.85 8.06 31.9 230 10.2 20.0 243 7/7. 46 10:30 79 4.80 85.85 pump off 12:52 -4.80 83.67 20.0 13:00 0 4.80 83.19 pump on -sample taken 10/10 46 13:03 3 4.85 83.20 8.07 90.0 300 9.9 20.0 266 10/10 46 13:13 13 5.00 83.79 8.00 115.0 270 9.8 20.0 259 10/10 46 13:27 27 5.25 84.31 7.88 69.4 250 9.8 20.0 266 10/10 46 13:55 55 5.50 85.59 7.97 90.0 270 9.8 20.0 264 10/10 46 14:04 pump off NOTES AND OBSERVATIONS:

Sampling Depth: .87 feet below grade on 8/21/06 88 feet below grade on 8/22/06 WELL ID: MW-30-88.GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet CLIENT: Entergy -IPEC SITE: S Buchanan, NY WEATHER: low 60's/ slightly overcast PROJECT NO: DATE: " SAMPLER(S):

41.0017869.10 11/28/2006

-11/29/2006 Sara Covelli GALLONS OF WATER PER WELL VOLUME: Well Volume = Water Column (T) (ft) x Multiplier x 0.653 Well Volume (V) = (Gallons)TOTAL VOLUME PURGED: well diameterimultiplierl Design= 4.5 (gallons) 2 .0.163 1 Actual = 4.5 (gallons) 4 0.6531 PURGE RATE: variable (gal / min) 6 1.4691 PURGE METHOD: Bladder pump SCREENED INTERVAL:

71.2-75.2 WATER QUALITY: Elapsed Purged Specific Dissolved Drive T E ied Vlur Depth to pH C dty Turbidity Temp Drive/Vent 1128206 -pt CodtviyOxygen ORP Pressure Time Time Volume Water (ft) (SU) mSn) (NTU) (mgeIn (OC) ___ (seconds)

Psi)(min) (gal) (mS/m) (rag/1) (psi)11/28/2006 11:43 '0 0.0 =- --'I12/6 20 11:50 7 0.1 -8.32 99.9 270 8.3 22.8 147 12/4 20 11:57 14 0.2 -8.31 90 200 8.2 23.0 157 12/4 40 12:05 22 0.5 -8.32 90 130 8.3 22.6 166 12/4 40 13:17 94 2.5 -8.38 99.9 130 8.3 22.5 186 12/4 38 13:40 117 3.0 -collected 50 mL tracer test sample 11/29/2006 10:45 begin purging mw-30-88 and mw-30-74 simultaneously; collect 1 gallon sample 4/4 25 11:25 157 pump off NOTES AND OBSERVATIONS:

Sampling Depth: 88 feet below grade 3/4 gallon sample taken at 14:30 and completed at 14:55 on 11/29/06.

WELL ID: MW-30-88 GZA GeoEnvironmental of New York Waterloo Sampling CLIENT: Entergy -IPEC SITE: Buchanan, NY WEATHER: low 60's/ slightly overcast Data Sheet PROJECT NO: DATE:-SAMPLER(S):

41.0017869.10 11/28/2006

-11/29/2006 Sara Covelli GALLONS OF WATER PER WELL VOLUME: Well Volume = Water Column (T) (ft) x Multiplier

= x 0.653 Well Volume (V) = (Gallons)TOTAL VOLUME PURGED: well diameter Imultiplied Design = 3.5 (gallons) 2

0.163, Actual = 3.5 (gallons) 4 I 0.653 PURGE RATE: variable (gal / min', 6 i 1.469.PURGE METHOD: Bladder pump SCREENED INTERVAL:

81.2-89.2 WATER QUALITY: Elapsed Purged Specific T Dissolve Drive Time Time Volume Depth to PH Conductivity Turbidity d Temp (C) ORP Drive/Vent re (min) (gal) Wae (ft _ (mS/m) (NTU) Oxygen I (seconds) (psi)11/28/2006 10:50 0 0.0 -12/12 40 11:09 19 0.4 -8.38 126 240 8.3 -22.2 161 12/12 40 11:18 28 0.6 -8.22 126 210 8.4 21.9 165 4/8 30 11:26 36 0.7 -8.35 126 220 8.4 21.2 158 4/4 40 11:35 45 1.0 -8.45 125 150 8.3 21.5 158 pump off 11:43-13:40 purge ofmw-30-74 13:47 45 1.0 -------12/4 40 13:55 53 1.2 -8.26 129 140 .8.2 22.3 192 4/4 40 14:05 63 1.5 -8.37 122 110 8.3 21.6 184 .4/4 40 14:19 77 1.8 -8.38 122 100 8.2 21.4 181 4/4 40 14:28 86 2.0 -8.37 100 100 8.2 21.6 181 4/4 40 14:43 101 2.3 8.41 125 100 8.4 20.9 177 4/4 40 11/29/2006

_ , " 9:22 101 2.3 ---.4/4 40 9:25 104 2.3 -7.66 124 78 5.7 17.9 , 235 6/4 40 9:31 110 2.4 -7.5 130 76 5.7 19.1 .. 226' 6/4 40 9:49 128 2.6 -7.42 133 74 5.3 18.6 221 6/6 40 9:56 135 2.7 -7.42 133 74 5.4 17.5 221 6/10 40 10:12 151 2.8 -7.41 133 1 73 1 5.6 15.1 223 6/10 40 10:41 180 2.8 7.39 127 74 5.4 13.4 225 6/10 40.10:45 begin purging mw-30-88 and mw-30-74 simultaneously 4/4 25 11:25 224 3.0 pump off 4/4 25 13:40 224 3.0 pump on 6/4 40 14:20 264 3.5 collected 50 mL tracer test sample 6/4 50 14:30 274 collected 3/4 gallon sample 6/4 58 14:35 279 6/4 58 14:55 299 pump off NOTES AND OBSERVATIONS:

Sampling Depth: 88 feet below grade 3/4 gallon sample taken at 14:30 and completed at 14:55 on 11/29/06.

GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet Wr.AA_ IV: WIIW- -.3 -/'4 CLIENT: Entergy -IPEC: Buchanan, NY w THER: raining, high 30's/ low 40's PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/15/2007 and 1/16/2007 S. Covelli SAMPLING INTERVAL (depth in ft below top of casing) GALLONS OF WATER PER WELL VOLUME: 67.3 to 71.3 Sampling Interval Length 4.0 ft SAMPLING PORT 74 x 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 1.96 gallons 4.5 gal PURGE RATE: variable PURGE METHOD: Double Valve Pump WATER QUALITY: Time Purged Volume pH (SU) Condctivity Turbidity Dissolved Drive/Vent Drive Pressure (gal) (mS/cm (NTU) Oxygen (g/l) Cycle (seconds) (psi)1/15/2007 12:44 0.00 pump on 6/4 54 12:55 0.35 6/4 54 13:04 0.60 6/4 54 13:15 1.00 pump off .... ___13:24 1.00 8.04 99.9 " 4.5 19.5 84 6/4 54 13:53 1.90 8.09 99.9 4.5 21.1 83 6/4 54 13:57 2.00 8.17 99.9 110 4.5 21.1 84 6/4 54 14:00 2.00 8.26 99.9 4.5 20 79 6/4 54 14:10 2.35 8.3 99.9 110 4.5 21.1 74 6/4 54 14:20 2.60 8.43 99.9 4.5 21 73 6/4 54 14:25 2.80 8.42 99.9 110 4.4 21 73 6/4 54 1/16/2007 8:29 2.80 8.07 99.9 .... 3.6 14.5 144 6/4 54 8:34 3.00 8.19 99.9 4.1 20.7 131 6/4 54 8:47 3.40 7.97 99.9 120 4.3 21.5 136 6/4 54 8:55 3.60 7.98 90 110 4.3 21.5 137 6/4 54 9:04 4.00 7:96 90 120 4.1 21.5 138 6/4 54 9:08 4.25 7.99 99.9 110 4.1 21.2 133 6/4 54 9:19 4.50 7.95 99.9 110 4.1 21.2 126 6/4 54-+ + 4 .+ 4 t 4+ 4 4 4 4 4+ 4 4 .1- 4 4 4 4 t .4 4 4- t I NOTES AND OBSERVATIONS:

GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet Wr-LL 11J: IVIW- .iU -65 CLIENT:. Entergy -IPEC SITE: Buchanan, NY WEATHER: raining, high 30's/low 40's PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/15/2007 and 1/16/2007 S. Covelli t SAMPLING INTERVAL (depth in ft below top of casing) GALLONS OF WATER PER WELL VOLUME: 77.3 to 85.4 Sampling Interval Length. 8.1 ft SAMPLING PORT 88 x 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 3.969 gallons 3.5 gal PURGE RATE: variable PURGE METHOD: Double Valve Pump WATER QUALITY: Purged Volume Specific Turbidity Dissolved Drive/Vent Drive Pressure Time ..*(gal) pH (SU) Conductivity (NMU Oxygen (g/Disolv Cycle (seconds) (psi)(mS/cm)115/2007 12:44 0.00 pump on 6/4 54 12:45 0.01 7.4 127 5.4 20.6 59 6/4 54 12:55 0.35 7.94 125 5.0 20.2 68 6/4 54 13:04 0.60 8.17 129 4.8 19:7 66 6/4 54 13:14 1.00 8.15 128 99 4.5 19.3 75 6/4 54 13:15 1.00 pump off 13:24 1.00 pump on 6/4 54 13:53 .1.90 6/4 54 13:57 2.00 numn off 6/4 54 A 13:57 6/4 2.00 pump off 54 j+ 4 *1- t 14:00.2.00 numo on 6/4 54 1 14:1002..

2 " pu--mp o/5 14:10 2.10 6/4 54 14:20 2.10 6/4 54 14:25 2.10 pump off 6/4 54 1/16/2007 8:29 2.10 pump on 6/4 54 8:34 2.40 6/4 54 8:47 2.75 6/4 54 8:55 2.90 6/4 54 9:04 2.95 6/4 54 9:08 2.95 6/4 54 9:19 300 pump off 6/4 54 9:26 3.00 pump on 6/8 54 9:32 3.00 8.2 7.5 4.2 14.5 135 6/8 54 10:18 .3.20 8.6 3.8 4.1 10.8 121 6/8 54 11:48 3.50 8.5 52.7 120 4.1 10.0 131 6/8 54 11:49 3.50 .pump off 6/8 54 NOTES AND OBSERVATIONS:

WELL ID: MW-31-53 GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet CLIENT: SITE: WEATHER: Entergy -IPEC Buchanan, NY low 60's/ overcast PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 11/27/2006 Sara Covelli GALLONS OF WATER PER WELL VOLUME: Well Volume = Water Column (T) (ft) x Multiplier

= x 0.653 Well Volume (V) = (Gallons)TOTAL VOLUME PURGED: -u di-w well diameter multiplier Design = 4.5 (gallons) 2 2 0.163 Actual = 4.5 (gallons) 4 4 0.653 PURGE RATE: variable (gal ain) 6 6 1.469 PURGE METHOD: Bladder pump SCREENED INTERVAL:

53 ft b/g WATER QUALITY: PugdSpecificDisle Elapsed Purged Depth to pH Conductivity Turbidity Dissolv Temp Drive/Vent Drive Time Time Volume Water (ft) (SU) (NTU) Oxygen Cm) ORP (seconds)

Pressure (min) (gal) (mS/m) (mg/I)1000 0 0.0 ------4/4 40 1015 15 1.0 7.69 99.9 110 4.3 16.5 222 4/4 40 1040 40 2.0 7.62 99.9 110 4.8 17.3 194 4/4 40 1103 63 3.0 7.68 97.4 100 5.2 17.1 198 4/4 40 1122 82 4.0 7.59 91.8 100 4.7 17.5 189 4/4 40 1145 105 4.5 ----4/4 40 NOTES AND OBSERVATIONS:

Sampling Depth: 53 feet below grade Began purge at 10:00. Sample taken at 11:45. Sampling completed at 12:00.

WELL ID: MW-31-89 GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY WEATHER: low 60's/ overcast PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 11/27/2006 Sara Covelli GALLONS OF WATER PER WELL VOLUME: Well Volume = Water Column (T) (ft) x Multiplier

= x 0.653 Well Volume (V) = (Gallons)TOTAL VOLUME PURGED: -iin di well diameter multiplier Design = 4.5 (gallons) 2 2 0.163 Actual = 4.5 (gallons) 4 4 0.653 PURGE RATE: variable (gal / min). 6 6 1.469 PURGE METHOD: Bladder pump SCREENED INTERVAL:

89 ft b/g WATER QUALITY: Elapsed Purged Depth to pH Specific Turbidity Dissolved Temp Drive/Vent Drive Ti e lapsed Pourged Dpht P 1 Conductivity (NTU) Oxge C) OR Time Time volume Water (ft) (SU) (mS/mi) vity (mg/i) (C) .(seconds)

Pressure_______ (min) (gal) _________

_____ _____ ___ ____ __1000 0 0.0 ------4/4 40 1025 25 1.0 -7.34 99.9 110 2.8 16.6 197 4/4 40 1055 55 2.0 7.36 99.9 .110 3.7 16.8 202 4/4 40 1122 82 3.0 7.41 99.9 .120 3.9 17.3 181. 4/4 40 1150 110 4.0 7.35 99.9 120 3.4 17.4 155 4/4 40 1220 140 4.5 -----4/4 40 NOTES AND OBSERVATIONS:

Sampling Depth: 89 feet below grade Began purge at 10:00. Sample taken at 12:20. Sampling completed at 12:40.

GLA GeoEnvironmental oL New York Waterloo Sampling Data Sheet W -LL lu.1 IVI W- I1 -0.CLIENT: Enter.E Buch W ER: cold gy -IPEC anan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/17/2007 S. Covelli SAMPLING INTERVAL (depth in ft below top. of casing) GALLONS OF WATER PER WELL VOLUME: 34.8 to 49.3 Sampling Interval Length 14.5 ft SAMPLING PORT 74 x 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 7.105 gallons*8.25 gal PURGE RATE: variable PURGE METHOD: Double Valve Pump, WATER QUALITY: Purged Volume Specific Turbidity Dissolved Drive/Vent Drive Pressure PuredVoum pH (SU) Conductivity Temp (°*) 'ORP (gal) (mSCcv) (NTU) Oxygen (g/I) .Cycle (seconds) (psi)12:00 0.00 pump on 12:06 0:40 6.9 99.9 170 5.7 16.6 166 6/8 54 12:12 1.00 7.34 99.1 140. 5.5 16.1 150 pump off 12:22 1.00 7.12 99.9 150 5.9 16.4 160 6/8 54 12:24 1.30 pump off 12:35 1.30 pump on 6/8 54 12:40 2.00 pump off 12:44. 2.00 pump on 6/8 54 12:45 2.20 pump off 12:47 2.20 pump on 6/8 54 12:50 2.40 6/8 54 12:55 3.00 pump off 14:00 3.00 pump on 6/6 54 14:06 3.80 6/6 54 14:09 4.00 pump off 14:12 4.00 .pump on 6/6 54 14:14 4.30 pump off 14:17 4.30 pump on 6/6 54 14:19 4.50 pump off 14:24 5.00 pump on 6/6 54 14:31 5.40 6/6 54 14:33 5.80 pump off 6/6 54 14:34 5.80 pump on 6/6 54 14:36 6.00 6/6 54 14:41 6.50 6/6 54 14:45 7.00 6/6 54 14:52 8.00 6/6 54 14:56 8.25 pump off 6/6 54 At 14:19, port valve not closing properly.NOTES AND OBSERVATIONS:

GLA GeoEnvironmental or N ew York Waterloo Sampling Data Sheet w r_1,I. u1'; IVIw- 31 -0/CLIENT: Entergy -IPEC SITE: Buchanan, NY WEATHER: cold PROJECT NO: DATE: SAMPLER(S):

.41.0017869.10 1/17/2007 S. Covelli SAMPLING INTERVAL (depth in ft below top of casing) GALLONS OF WATER PER WELL VOLUME: 55.3 to 63.8 Sampling Interval Length 8.5 ft SAMPLING PORT 67. X 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 4.165 gallons 3.5 gal PURGE RATE: variable PURGE METHOD: Double Valve Pump WATER QUALITY: Purged Volume Specific Turbidity Dissolved Drive/Vent Drive Pressure Time (a) pH (SU) ConduictiVit Temp (CC) ORP (gal) imS/cm) (NTU) Oxygen (gl) Cycle (seconds) (psi).12:00 0.00 pump on 12:06 0.25 6/8 54 12:12 0.40 pump off 6/8 54 12:22 0.40 pump on 6/8 54 12:24 0.60 pump off 12:35 0.60 pump on 6/8 54 12:40 0.90 pump off 12:44 0.90 pump on 6/8 54 12:45 1.00 pump off 12:47 1.00 pump on 6/8 54 12:50 1.20 6/8 54 12:55 .1.30 pump off 14:00 1.30 7.28 .99.9 -6 13.4 162 6/6 54 14:06 1.50 7.9 92.7 150 6.9 13.4 111 6/6 54 14:09 1.60 7.89 99.9 100 6.9 13.5 111 pum off 14:12 1.60 .pump on 6/6 54.14:14 1.75 7.9 99.9 110 7 13.7 107 pum off 14:17 1.75 pump on 6/6 54 14:20 2.00 pump off 14:24 2.00 pump on 6/6 54 14:31 2.40 6/6 54 14:33 2.50 pump off 6/6 54 14:34 2.50 pump on 6/6 54 14:36 2.60 6/6 54 14:41 2.80 6/6 54 14:45 3.00 6/6 54 14:52 3.30 6/6 54 15:00 3.50 pump off 6/6 54 NOTES AND OBSERVATIONS:

UiLA ueoIhnvironmental ot iN ew Y orK Waterloo Sampling Data Sheet L)J. IVI VV- j I -0y CLIENT: Entergy -IPEC S I Buchanan, NY'W ER: cold PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/17/2007 S. Covelli SAMPLING INTERVAL (depth in ft below top of casing) GALLONS OF WATER PER WELL VOLUME: 69.8 to 85.4 Sampling Interval Length *15.6 ft SAMPLING PORT 89 x 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 7.644 gallons 3.5 gal PURGE RATE: variable PURGE METHOD: Double Valve Pump WATER QUALITY: TiPurged Volume ppc fic Turbidity Dissolved Drive/Vent Drive Pressure (gal) (mS/cmivity (NTU) Oxygen (g/l Temp C) ORP Cycle (seconds) (psi)12:00 0.00 pump on 12:06 0.40 6/8 54 12:12 0.80 pump off 12:22 0.80 pump on 6/8 54 12:24 1.00 pump off "_" 12:35 1.00 7.03 99.9 100 3.3 15.2 166 6/8 54 12:40 1.30 7 99.9 100 2.6 15.9 160 pump off 12:44 1.30 pump on 6/8 54 12:45 1.40 6.97 99.9 100 2.5 14.6 160 pum off 12:47 1.40 pump on 6/8 54 2:50 1.60 6.95 99.9 100 2.4 15.8 163 6/8 54 2:55 2.00 7.01 99.9 100 2.4 16.3 159

pum off 14:00 2.00 pump on 6/6 54 14:06 2.50 6/6 54 14:09 2.60 pump off 14:12 2.60 pump on 6/6 54 14:14 3.00 pump off 14:17 3.00 pump on 6/6 54 14:20 3.30 pump off 14:24 3.30 pump on 6/6 54 14:31 3.80 6/6. 54 14:33 4.00 pump off 14:34 4.00 pump on 6/6 54 14:36 4.40 6/6 54 14:41 4.60 pump off "_" NOTES AND OBSERVATIONS:

GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet WELL LU: MIW- J2 -02 CLIENT: Entergy,-

IPEC SITE: Buchanan, NY WEATHER: very cold PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/18/2007 S. Covelli/ S. Kline SAMPLING INTERVAL (depth in ft below top of casing) GALLONS OF WATER PER WELL VOLUME: 46.9 to 62.4 Sampling Interval Length 15.5 ft SAMPLING PORT 62 X 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 7.595 gallons 8 gal PURGE RATE: variable PURGE METHOD: Double Valve Pump WATER QUALITY: J Specific Time Purged Volume pH (SU) Conductivity Turbidity Dissolved T Drive/Vent Drive Pressure (gal) (mS/cmi (NTU) Oxygen (g/l) Temp ýC) Cycle (seconds) (psi)10:55 0.00 pump on; transducer indicates sensor temperature of 2V C 6/6 55.11:10 0.10 6.6 87.3 250 4.8 18.8 207 6/6 55 11:15 0.50 7.1 .86.3 150 6.2 19.1 193 6/6 55.11:18 1.00 7.3 88.7 130 5.2 18.9 187. pump off 12:15 1.00 pumpon _ 6/6 55 12:18 2.00 7.6 62.8 _ 170 5.9 19.4 169 6/6 55 12:25 3.00 6/6 55 12:32 3.70 7.5 73.3 150 5.9 19.3 169 6/6 55 12:34 4.00

I 19.5. 6/6 55 12:42 5.00 7.5 80 120 5.9 19.3 170 6/6 55 12:40 6.00 6/6 55 12:50 7.00

6/6 55 12:55 7.50 19.3 6/6 55 12:58 8.00 NOTES AND OBSERVATIONS:

Vent Lines are frozen at first attempt to purge. Lines were de-iced using a heat gun.

GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet WLLL 11J: fVIW- J2 -Y/-CLIENT:.FHE R Entergy -IPEC Buchanan, NY very cold PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/18/2007*S. Covelli/ S. Kline SAMPLING INTERVAL (depth in ft below top of casing) GALLONS OF WATER PER WELL VOLUME: 82.4 .. to 92.9 Sampling Interval Length 10.5 ft SAMPLING PORT 92 x 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 5.145 gallons 6 gal PURGE RATE: variable PURGE METHOD:. Double Valve Pump...WATER QUALITY: Time Purged Volume Specificity Turbidity Dissolved DriveTent Drive Pressure (gal) pH (SU) Conductivi (NTU) Oxygen (g/l) Cycle (seconds) (psi)(mS/am)10:57 0 pump on; transducer indicates sensor temperature of 19.31 C 6/6 55 12:20 0.50 " 6/6 55 12:26 1.00 6/6 55 12:37 1.00 19 6/6 55 12:39 2.00 6/6 55 12:45 2.50 7.5 74.5 98 4 17.5 165 6/6 55 12:50 3.00 7.3 77.8 98 3.6 17.5 169 6/6 55 12:52 3.30 18.9 6/6 55 12:59 4.00 7.4 79.8. 98 3.4 17.5 163 6/6 55 13:12 5.00 6/6 55 13:20 5.50 18.9 6/6 55 13:27 6.00 6/6 55 13:31 6.00 pump off; transducer indicates sensor temperature of 18.90 C NOTES AND OBSERVATIONS:

Vent Lines are frozen at first attempt to purge. Lines were de-iced using a heat gun.

GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet WIZLL W: IVIW- JZ -14U CLIENT: SITE: WEATHER: Entergy -IPEC Buchanan, NY very cold PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/18/2007 S. Covelli/ S. Kline SAMPLING INTERVAL (depth in ft below top of casing) GALLONS OF WATER PER WELL VOLUME: 119.9 to 140.4 Sampling Interval Length 20.5 ft SAMPLING PORT 140 x 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 10.045 gallons 10.5 gal PURGE RATE: variable PURGE METHOD: Double Valve Pump WATER QUALITY: Purged Volume pH (SU) Conductivity Turbidity Dissolved T Cc( Drive/Vcnd (pi)(gal) ( (mS/cm) (NTU) Oxygen (g/l) Temp Cycle (seconds) (psi)10:59 0 pump on; transducer indicates sensor temperature of 17.5°C _ _6/6 "_55 12:19 0.5 6/6 55 12:20 1.00 17.5 6/6. 55 12:40 2.00 6/6 .. 55 12:55 3.00 6/6 55 13:04 3.50 7.2 85.6 98 5.2 17.7 170 6/6 55 13:05 .17.5 6/6 55 13:10 .3.80 7.5 88.5 97 2.8 17.6 156 6/6 55 13:13. 4.00 6/6 55 13:17 4.30 7.2 87.8 97 2.8 17.4 153 6/6 55 13:25 4.50 7.3 87 98 2.9 17.4 148 6/6 55 13:30 5.00 .. ...8/8 60 13:33 5.10 8/8 60 13:35 5.40 7.3 79.9 98" 3.1 17.5 145 8/8 60 13:45 6.00 " 8/8 60 13:55 6.70 transducer indicates sensor temperature of 17.50C 8/8 60 13:57 7.00 8/8 60 14:15 8.00 8/8 60 14:20 8.30 transducer indicates sensor temperature of 17.5'C 8/8 60 14:29 9.00 * .8/8 60 14:45 10.00 8/8 60 14:52 10.50 pump off 8/8 60 NOTES AND OBSERVATIONS:

Vent Lines are frozen at first attempt to purge. Lines were de-iced using a beat gun.

GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet WILL 1j: N" 1W- .ý/ -IOU CLIENT: Entergy -Buchanan very col IPEC ,NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/18/2007 S. Covelli! S. Kline SAMPLING INTERVAL (depth in ft below top of casing) GALLONS OF WATER PER WELL VOLUME:.146.4 to 161.9 Sampling Interval Length 15.5 ft SAMPLING PORT 160 x 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 7.595 gallons 8.5 gal PURGE RATE: variable PURGE METHOD: Double Valve Pump WATER QUALITY: Purged Volume Specific Turbidity

Dissolved)

Drive/Vent Drive Pressure (gal) pH (SU) Conductivity Temp (TC) ORPDissol (mS/cm) (NU Oxgn(/)Cce(eod) (pi 11:03 0 pump on; transducer indicates sensor temperature of 16.6 0 C 6/6 55 12:19 0A4 transducer indicates sensor temperature of 16.5'C 6/6 55 12:30 1.00 6/6 55 12:45 2.00 6/6 55 12:56 .3.00 6/6 55 13:10 3.80 transducer indicates sensor temperature of 16.6 0 C 6/6 55 13:14 4.00 6/6 55 13:36 4.40 transducer indicates sensor temperature of 16.70C 8/8 60 13:48 5.00 7.3 89.3 98 3.8 .16.9 148 8/8 60 13:55 5.50 7.3 87.5 98 2.9 17.3 141 8/8 60 13:56 5.60 transducer indicates sensor temperature of 16.7 0 C 8/8 60 14:03 6.00 7.3 84.6 98 3 17.3 138 8/8 60 14:18 6.50 transducer indicates sensor temperature of 16.70C 8/8 60 14:25 7.00 8/8 60 14:40 8.0'0 transducer indicates sensor temperature of 16.70C .8/8 60 14:45 8.50 pump off NOTES AND OBSERVATIONS:

Vent Lines are frozen at first attempt to purge. Lines were de-iced using a heat gun.

GZA GeoEnvironmental of New York Waterloo Sampling Data Sheet WhLL 11): MW 19/CLIENT: SITE: WEATHER: Entergy -IPEC Buchanan, NY very cold PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/18/2007 S. Covelli/ S. Kline SAMPLING INTERVAL (depth in ft below top of casing) GALLONS OF WATER PER WELL VOLUME: 167.9 to 198.4 Sampling Interval Length. 30.5 ft SAMPLING PORT 197 x 0.49 multiplier TOTAL VOLUME PURGED: WELL VOLUME: 14.945 gallons 9 gal PURGE RATE:variable PURGE METHOD: Double Valve Pump WATER QUALITY: Purged Volume Turbidity Dissolved Drive/Vent Drive Pressure (gal) conductivity (NTUJ) Oxygen (g/l) .(C) Cycle (seconds) (psi)__________

_______I (mS/cm) I 11:05 0.00 pump on; transducer indicates sensor temperature of 15.0'C 6/6 55 11:18 0.00 transducer indicates sensor temperature of 15.0'C 6/6 55 12:15 0.00 transducer indicates sensor temperature of 15.1 C 6/6 55 12:18 .0.70 6/6 55 12:23 1.00 6/6 55 12:48 2.00 6/6 55 13:09 3.00 6/6 55 13:16 3.30 transducer indicates sensor temperature of 15.1 C 8/8 60 13:34 4.00 8/8 60 13:37 4.20 transducer indicates sensor temperature of 15.1C 8/8 60, 13:55 5.00 -. 8/8 60 14:00 transducer indicates sensor temperature of 15.1 0 C 8/8 60 14:14 6.00 8/8 60 14:15 transducer indicates sensor temperature of 15.lC IT 8/8 60 14:16 .6.10 7.3' 89.7 97 2.2 16.4 136 8/8 60 14:25 6.50 7.3 89.3 97 2.2 16.8 131 8/8 60 14:30 6.70 7.3 88.9 97 2.1 16.9 129 8/8 60 14:35 7.00 7.3 89.4 97 2.2 17.0 126 8/8 60 14:45 7.50 __8/8 60 14:50 8.00 7.3 89.5 97 2.2 17.2 125 8/8 60 15:00 8.30 7.3 89.5 97 2.2 17.3 125 8/8 60 15:15 9.00 7.3 89.5 97 2.2 17.3 125 8/8 60 NOTES AND OBSERVATIONS:

Vent Lines are frozen at first attempt to purge. Lines were de-iced using a heat gun.

WELL ID: MW-38-40 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/11/07 Sara Covelli / Angela Hough WATER QUALITY: Depth to pH Specific Turbidity Dissolved Rate Pump Time Wte (ft) Conductivity Oxygen Temp eC) ORP (gRa) Depth (ft) Notes S a ( ( (mS/m) .( 1)ge LOW TIDEJ I I I I 11:36 12.75 5.72 476.0 74.4 6.13 16.42 128 7.5 pump on/salinity 00 11:45 12.72 7.22 461.0 4 2.29 20.22 43 8.0 salinity 0.0 11:48 12.70 7.38 556.0 4.7 2.74 19.90 23 8.0 40.0 salinity 0.0 11:52 -------sample collected 11:56 --pumpoff HIGH TIDEI I I_ __ _16:36 11.25 ---pump on 16:39 11.25 6.35 192.0 13.8 8.23 18.07 107 10.0 salinity 0.0 17:30 11.25 6.00 191.0 11.8. 8.10 16.87 111 6.0- 40.0 salinity 0.0 17:32 11.25 -- = 40. samplecollected 17:34 ---" -piump off NOTES AND OBSERVATIONS:

Low Tide occurred at approximately 10:34 and High Tide occurred at approximately 16:05. Low and High Tide times were determined based on water elevation readings from stilling well HR-I.

WELL ID: MW-38-20 GZA GeoEnvironmental*

of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10' 1/11/07 Sara Covelli / Angela Hough WATER QUALITY: Depth to PH Specific Turbidity Dissolved T pC) Rate Pump Time Depth to pH Conductivity Oxygen Temp ORP I Dep Notes Water (ft) (SU)_ ' (mS/m) (NTU) (g/l) _______ Depth (ft_LOW T1DEI _ I TE I I 11:39 12.75 --7.75 pump on 11:42 12.75 7.27 475.0 6.7 2.49 20.10 38 7.75 salinity 0.0 11:50 12.70 7.44 579.0 3.6 2.46 20.77. 23 8.00 20.0 salinity 0.0 11:54 ----sample collected 11:56 ---pump off HIGH TIDE I I I1 I _I _I_16:36 11.25 ---pump on 16:42 11.25 5.70 0.0 80.3 8.51 17.95 .134 5.25 salinity 0.0 17:25 11.25 5.99 190.0 13.5 8.44 16.52 107 2.00 20.0 salinity 0.0 17:27 11.25 -------sample collected 17:34 -- --pump off NOTES AND OBSERVATIONS:

Low Tide occurred at approximately 10:34 and High Tide occurred at approximately 16:05. Low and High Tide times were determined based on water elevation readings from stilling well HR-1.

WELL ID: MW-42-51 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 3/31/06 S. Covelli WATER QUALITY: Specific Turbidity Dissolved Rate Pump Notes Tim Depth to pH Conductivity i IOxygen Temp (C) ORP Rate Dept (ot)i Water (fti (SU) (uS/cm) (NTU) (mg)(ML/min)

Depth (ft)837 36.17 start pump 845 *36.65 2.87 99.90 NA 2.27 14.5 250 160 854 36.61 3.73 2.22 NA 8.99 15.7 178 210 900 36.83 5.17 5.90 NA 3.92' 18.9 87 230 906 36.90 5.52 3.48 NA 6.64 20.0 66 220 912 36.91 5.49 2.03 NA 6.54 20.1 67 200 918 36.90 5.40 1.91 NA 6.31 20.4 73 210 924 36.90 5.31 1.84 NA 6.27 20.1 77 220 1 sample taken 945 36.82 start pump 947 36.90 4.82 2.26 NA 4.60 17.8 111 350 953 37.12 5.15 2.17 NA 6.41 20.6 97 240 45.5 959 37.07 5.22 2.05 NA 6.31 20.1 94 230 1005 37.05 5.24 1.94 NA 6.00 20.3 94 240 sample taken 1033 36.25 start pump 1038 36.70 4.40 4.53 NA 7.90 18.3 162 160 1044 36.88 4.70 1.81 NA 4.51 20.0 140 230 4.1050 36.96 4.92 1.92 NA *. 4.53 20.5 133 230 1054 37.00 5.07 2.06 NA 4.56 21.0 127 220 1100 1 37.02 5.14 1 2.12 NA 4.13 21.0 123 220 sample taken 1246 36,22 " start pump 1251 36.54 4.37 0.01 NA 8.64 17.3 206 75 1257 36.48 4.21 3.70 NA 5.23 16.6 195 100 1303 36,46 4.33 2.42 NA 4.71 16.6 178 80 41 1309 36,51 4.48 1.85 NA 4.04 17.8 169 110 1315 36,46 4.66 1.92 NA 3.84 19.0 162 100 1321 1 36,50 4.75 2.01 NA 3.72 19.5 158 100 sample taken NOTES AND OBSERVATIONS:

WELL ID: MW-42-51 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy 7 IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 4/06/06 S. Covelli WATER QUALITY: Depth to pH Specific Turbidity Dissolved Rate Pump STimne Water. " Conductivity (NTU) Oxygen Temp (C) ORP (mL/min) Depth (ft) Notes..(f1) (SU) (uS/cm) * (mg/i)1042 35.40 start pump 1047 35.77 7.91 6.6 633 13.10 12.2 262 225 1057 36.00 7.80 9.6 623 5.53 14.9 22 225 1107 36.10 7.84 9.4 689 5.69 17.6 19 240 1114 36.12 7.83 7.2 610 5.49 17.7 33 250 48 1120 36:13 7.82 6.6 552 5.54 17.8 42 250 1126 3615 .7.80 .6.2 472- 5.62 18.0 46 250.1132 36.15 7.79 6.1 432 5.64 18.0 47 250 1138 36.17 7.77 5.9 386 5.67 18.2 44 260 " sample taken 1337 35.41 .......start ump 1340 36.07 7.31 5.4 359 7.48 12.5 117 240 1346 .36.05 7.78. ." 5.4 294 6.44 14.3 62 250 1351 36.26 7.77 5.5 228 6.59 18.1 51 280 45.5 1407 36.21 7.74 5.2 197 7.81 18.2 47 190 1413 36.16 7.74 5.1 193 7.56 17.9 51 330 1419 36.13 7.74 5.2 192 7.37 18.5 48 330 sample taken 1504 36.25 7.73 5.0 173 5.78 18.4 461

275 1511 36.43 7.72 4.9 185 5.75 18.4 42 325 43 1521 36.25 .7.73 5.0 179 5.64 17.4 43 250 " sample taken 1554 36.52 7.72 4.8 167 5.79 20.1 37 400 1602 36.38 7.72 4.9 177 5.87 18.7 45 320.1608 36.42 .7.67 4.5 173 5.58 19.0 51 400 41 1615 36.43 7.70 4.7 169 5.82 19.3 47 390 1621 36.32 7.72 4.8 168 5.87 19.3 47 350 sample take NOTES AND OBSERVATIONS:

WELL ID: MW-42-51 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 7/20/06 -7/21/06 S. Covelli WATER QUALITY: Depth to pH Specific Turbidity Dissolved Rate Pump Time t Conductivity Oxygen Temp °C) ORP .Notes Water (ft) (SU) (uS/cm) (NTU) (mg/) (mL/min) Depth (ft)7/20/2006 1316 34.64 ... .-pump on 1322 35.40 7.06. 3.5 369 1.76 20.5 50 300 1340 35.44 7.25 2.0 266 2.80 22.0 27 250 1351 35.51 7.18 1.6 170 3.49 22.0 34 300 48 1413 35.61 7.13 1.4 161 3.73 22.0 37 275 1427 35.64 7.13 1.4 203 3.75 1 22.0 38 300 1430 sample taken/pump off 7/21/2006_

_ I 821 34.69 ....1. .pump on 830 35.02 7.12 1.6 180 5.37 20.1 167 125 844 35.30 7.30 1.4 107 4.52 21.4 56 175 852 35.43 7.26 1.3 93.7 4.48 21.8 53 225 858 35.45 7.24 1.3 87.9 4.44 21.8 51 225 900 1 sample taken/pump off 953 34.72 .ump on 957 35.23 7.32 1.3 150 5.55 19.7 123 250 1005 35.38 7.04 1.3 93.9 4.80 21.6 77 200 1012 35.39. 7.14 1.3

79.8 4.70 22.1 61 200 43 1020 35.40 7.19 1.3 68.8 4.56 22.5 53 200 1030 35.42 7.18 1.3 63.7 4.46 23.3 52 200 1033 , sample taken 1040 pump remains on 1041 35.33 7.18 1.3 151 4.30 22.8 55 200 1107 35.52 7.15 1.2 40.7 4.16 23.4 50 275 41 1116 35.53 7.14 1.2 33.8 4.14 23.8 52 275 1134 35.54 7.13 1.2 34.5 4.08 23.7 58 -275 1135 1 1 _ _ _ _ _ pump off NOTES AND OBSERVATIONS:

WELL ID: MW-42-51 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 9/15/06 A. Hough WATER QUALITY: _ _'_Depth to Specific T !Dissolved ORP Rate Pump Time Water pH Conductivity idi Oxygen Temp (C) (mV) Pmp { Notes e Wte (SU) (NTj) (gal/hr) Depth (11)(ft) " (uS/cm) ) (mgi1)II II 1022 34.62 start pump 1025 35.59 7.60 0.187 480 6.1 18.5 137 4.2 ... ..1028 35.55 7.68 0.188 410 3.4 18.5 123 3.8 1031 35.43 7.74 0.186 640 3.8 19.0 114 3.8 1034 35.41 7,76 0.183 450 3.8 .19.1 114 3.8 1037 35.38 7.80 0.167 390 4.0 19.7 117 2.6 1040 35.29 7.85 0.160 320 4.0 20.1 119 2.6 1043 35.15 7.88 0.157 290 4.0 20.3 122 2.2 48 1047 35.05 7.90 0.155 280 4.0 20.3 123 2.5 1050 34.99 7.91 0.155 250 4.0 20.4 122 1.8 1053 34.99 7.90 0.153 230 3.8 20.5 86 1.6 1056 34.99 7.89 0.152 230 3.8 20.5 72 1.6 1059 34.99 7.88 0,153 190 3.7 20.5 68 1.6 1102 34.98 7.87 0.152 190 3.7 20.5 68 1.6 1105ý 34.97 7.86 0.151- 190 3.8 20.5 69 1.6 1106 34.96 7.86 0.151 180 3.8 20.6 69 1.6 sample taken 1132 34.34 .start pump 1134 35.08 7.91 0.137 220 5.4 20.3 143 2.3 1137 35.02 7.83 0.134 190 4.7 20.4 134 1.4 1140 34.97 .7.81 0.134 170 4.6 20.4 125 1.6 1143 34.94 7.82 0.132 160 4.6 20.4 121 1.6* 1146 34.93 7.81 0.132 150 4.5 20.4 115 1.6 1150 34.91 7.82 0.130 110 4.5 20.3 108 1.6 1154 34.92 7.82 0.130 110 4.4 , 20.2 103 1.5* 1158 34.90 7.81 0.130 110 4.3 -- -20.3 99 -"15 46 1202 34.90 7.81 0.130 80 4.3 20.3 99 1.5 1206 34.90 7.81 0.129 70 " 4.3 20.4 98 1.4 1210 34.89 7.81 0.127 47 4.2 -20.6 97 1.5 1214 34.89 7.82 0.127 39 4.1 20.7 97 1.5 1218 34.89 7.82 0.126 37 4.1 20.8 98 1.5 1222 34.88 7.82 0.126 34 4.2 20.8 .99 1.5 1226 34.89 7.81 0.126 31 4.1 .20.9 101 1.5 1229 34.89 7.81 0.125 32 4.1 20.9 102 1.5 1231 34.88 7.80 .' 0.125 26 4.2

20.9 .103 1.5 sample taken NOTES AND OBSERVATIONS:

GZA GeoEnvironmental of New York Low-Flow Sampling Data. Sheet PROJECT NO: 41.0017869.10 DATE: 9/18/06 SAMPLER(S):

A. Hough WELL ID: MW-42-51 CLIENT: Entergy -IPEC SITE: Buchanan, NY 0 WATER QUALITY: Depth to Specific Dissolved Time Water pH Conductivity T Oxygen Temp C) ORP Rate Pump.- Oxyge (SU) I U(c)1 (N U )g1 (mV). (gal/hr) Depth (ft) Notes___ f) (uS/cm) _ __ (mg/I)j 856 35.52 900 35.08 7.29 0.099 240 8.6 18.7 186 2.0 904 35.00 7.72 0.096 200 7.9 18.6 194 1.6 908 34.90 7.77 .0.094 180 7.7 -18.7 201 1.0 912 34.81 7.77 0.093 150 7.9 18.8 202 0.8 917 34.74 7.78 0.093 210 7.9 19.1 202 0.6 921 34.69 7.80 0.093 160 8.0 19.2 201 0.6 925 34.67 7.83 0.092 .160 7.9 .19.6 197 0.6

_929 34.64 7.84 0.092 140 1.0 19.7 195 0.4 934 34.68 7.90 0.092 140 6.8 20.2 190 1.4 939 34.67 7.94 0.092 200 7.5 20.5 195 1.6 943 34.71 7.91 0.092 160 7.5 20.5 192 0.8 947 34.70 7.92 0.091 95 7.4 20.7 191 0.4 951 34.63 7.90 0.091 85 7.4 20.8 189 0.4 954 34.61 7.90 0.091 89 7.7 20.\8 188 0.4 959 34.58 7.90 0.091 120 7.4 20.9 187 0.6 1003 34.57 7.90 0.091 130

7.3 21.1 187 0.4 1008 34.56 7.89 0.092 110 7.3 21.2 185 0.4 1012 34.57 7.88 0.092 110 7.3 21.3 186 0.4 1016 34.56 7.86 0.092 94 7.4 21.5 184 0.4 1020 34.55 7.86 0.092 80 7.3 21.6 182 0.4 1025 34.55 7.89 0.090 110 7.5 21.9 184 0.4 43 1029 34.56 7.86 0.092 97 7.3 22.0 184 0.4 1034 pump turned off for 15 min 1054 34.90 7.95 0.094 91 7.9 22.2 198 0.4 1058 1 34,79 7.87 0.092 70 7.5 22.2 189 0.4 1102 34.69 7.86 0.092 55 7.4 22.1 187 04 1105 34.64 7.85 0.092 45 7.5 22.1 .186 0.4 1109 34.63 7.85 0.092 49 7.5 22.1 184 0.4 1112 34.60 7.86 0.092 38 7.4 22.2 184 0.4 1115 34.59 7.85 0.092 28 7.5 22.1

183. 0.4 1118 34.57 7.85 0.092 26 7.3 22.2 182 0.4 1122 34.58 7.85 0.092 18 7.3 .22.3 .181 0.4 1125 34.57 7:85 0.092. 12 7.3 22.3 180 0.4 1128 34.57 7.86 0.092 13 7.2 22.5 180 0.4 1130 1 1 .pump turned off for 4 min 1136 35.14 7.81 0.091 20 6.4 24.6 159 0.4 1139 35.09 7.80 0.091 16 6.3 24.9 151 0.4 1142 35.03 7.79 0.091 15 6.2 24.8 147 0.4 1145 34.98 7.79 0.090 8 6.0 24.5 .146 0.4 1148 34.89 7.75 .0.090 9

6.0 24.3 147 0.4 1151 34.82 7.78 0.090 8 6.0 24.2 148 0.4 pump turned offfor 42 min 1237 35.21 7.87 0.090 5 7.6 21.8 212 0.4 sample taken 1342 34.19 I 1344 35.25 7.78 0.090 42 6.7 20.8 218 1.0 1347 35.11 7.76 0.090 21 6.8 21.3 214 1.5 1350 35.04 7.69 0.090 29 6.7 22.2 214 1.7 1353 34.92 7.65 0.090 .53 6.7. 22.2 209 1.1 1356 34.89 7.64 0.090 25 6.6 22.6 208 1.2 1400 34.85 7.61 0.090 17 6.5 23.1 200 0.6 1403 34.83 7.60 0.090 52 6.4. 23.4 198 1.2 1406 34.74 7.69 0.090 33 6.4 23.5 188 0.6 41 1409 34.68 7.71 0.090 33 6.5 23.7 184 0.6 41 1412 34.62 7.75 0.090 0 6.5 23.9 182 0.4 1415 34.62 7.75 .. .0.090... 23 6.2 24.3 181 0.4 1418 34.61 7.75 0.090 12 .6.4 24.3. 181 0.4 1423 34.73 7.74 0.090 1 6.3 24.6 182 0.4 1426 35.38 7.75 0.090 0 6.2 25.3 176 0.4 1429 35.43 7.73 0.090 0 6.3 25.9 172 0.4 1432 35.80 7.73 0:090,. 0 6.5 25.8 169 0.4 1435 35.75 7.69 0.090 0 6.1 24.8 167 0.4 sampie taken NOTES AND OBSERVATIONS:

.

WELL ID: MW-42-51 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: 41.0017869.10 DATE: 11/16/06 -11/17/06 SAMPLER(S):...

S. Covelli WATER QUALITY: Depth.to pH Specific Turbidity Dissolved Rate Pump1*Time -Water ' Conductivity Oxygen Temp (°C) ORP ... Notes .tr (SU) (mS/m) (TU) (g/l) JNM(gal/hr)

Depth (ft)11/16/2006 1 _ " [ .. _ _ 1 833 34.89

__.... _..... ..0.0 845 34.87 0.0 pump on 855 35.24 7.86 127.0 >1000 1.90 17.5 -60 1.0 increased flow rate 900 35.20 7.86 132.0 710 1.60 18.8 -63 1.4 increased flow rate.907 35.25 7.88 122.0 740 1.60 7.7 -63 2.5 930 35.39 8.04 99.9 340 3.80 20.3 30 2.5 948 35.43 7.99 97.3 240 4.30 21.1 63 2.5 1010 35.41 7.97 93.3 170 4.70 21.3 88 2.6 1030 35.43 7.94 86.4 160 4.70 21.5 103 3.0 1047 35.55 7.93 86.4 150 4.70 22.0 109 3.0.1052 .Note 1 1114 4- ...... .........

_'pumpoff 1135 34.87 1139 pump on 1141 35.29 flow meter malfimction 1147 35.48 7.97 88.0 370 4.70 20.2 79 3.0 1200 35.52 7.99 85.1 220 4.60 22.1 66 3.1 1258 35.56 7.91 85.8 150 4.60 23.0 113 3.4 1302 Note 1 1330 pump off 1344 34.81 1346 pump on 1348 35.25 1352 35.25 7.98 87.9 210 4.90 19.6 145 .2.0.1355 35.27 7.93 87.8 200 4.80 19.9 136 2.8 43 1400 35.40 7.89 84.8 170 4.70 22.3 122 3.0 1414 35.55 7.91 .85.2 140 4.80 23.6 117 3.5 1421 35.62 7.92 88.6 140 "4.90 23.6 117 3.5 1424 Note I 1'1/1 7/20061 800 34.52 pump on 804 35.24 8.32 80.7 200 4.90 16.9 198 2.0 811 35.28 8.10 77.8 190 4.70 19.0 192 3.1 818 35.32 8.03 78.9 140 4.90 21.8 182 3.5"' 41 826 35.35 8.03 80.4 130 5.00 22.4 178 3.4 835 35.39 8.03 82.4 130 5.00 22.4 174 3.4 842 35.40 8.03 83.0 130 5.00 22.7 173 3.4.844 t11_Note NOTES AND OBSERVATIONS:

1- Three-way split sample taken for IPEC, NRC, and NYS. Bulk sample was drawn into a gallon bottle and divided into three 1 liter bottles.0 WELL ID: MW-48-38 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10 1/11/07 Sara Covelli / Angela Hough WATER QUALITY: Water pH Specific Turbidity Dissolved Rate .Pump .Time Elevation pH Conductivity I I Oxygen Temp (eC) ORP -Notes (ft asl) ( (mS/m) (NTU) (g/l) (ga/hr) Depth (ft)LOW TIDE I1 II 11:06 --"- 2.5 pump on 11:26 -0.224 7.68 90.000 120 5.50 15.30 75 2.5 11:29 -0.270 7.20 90.000 99 4.50 16.50 19 3.0 28.0 11:32 -0.158 7.32 90.000 97 4.30 16.80 7 2.0 11:34 -0.191 7.36 90.000 96 4.20 16.70 0 2.0 11:35 .... .... " sample collected HIGHTIDE I I I 16:20 -----pump on 16:47 1.014 7.48 99.900 93 4.30 16.90 -76 3.0 salinity 0.0 16:55 1.052 7.56 90.000 93 4.30 16.80 0 3.0 28.0 salinity 0.1 17:00 1.004 7.63 90.000 '96 4.20 " 16.9 :63 " 3 salinity 0.0 17:02 --"- ---" sample collected NOTES AND OBSERVATIONS:

Low Tide occurred at approximately 10:34 and High Tide occurred at approximately 16:05. Low and High Tide times were determined based on water elevation readings from stilling well HR-1.

WELL ID: MW-48-23 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.10' 1/11/07 Sara Covelli / Angela Hough WATER QUALITY: Depth to .pH. *Specific Dissolved Rate Pump-Water (SU/m (NTU) oOxygen Tep RP (gal) Depth (ft) Notes LOW TIDE[ I I_ _ _11:16 15.70 ---pumpon 11:41 15.76 7.38 90.0 95 4.1 16.3 -16 4.2 11:44 15.65 90.0 93 3.4 18.9 40 4.2 20.0 11:47 15.64 7.47 90.0 93 3.2 19.9 -39 4.2 HIGH TIDE I 16:23 13.93 -- -pump on 16:24 14.03 7.80 150.0 120 2.4 14.5 -128 4.0 salinity 0.0 16:51 13.37 7.52 90.0 93 4.3 17.4 -72 3.0 2. lnt .16:59 13.40 7.53 90.0 95 4.1 16.8 -67 3.0 20.0 salinity 0.1 16:59___ 13.40_ 7.53_0.0_5_4.

16.8_-67_3.0 salinity 0.1.17:05 13.44 7.79 94.6 95 4.0 16.2 -37 3.0 salinity 0.0 17:08 --sample collected NOTES AND OBSERVATIONS:

Low Tide occurred at approximately 10:34 and High Tide occurred at approximately 16:05. Low and High Tide times were determined based on water elevation readings from stilling well HR-1.

WELL ID: MW-42-51 GZA GeoEnvironmental of New York Low-Flow Sampling Data Sheet CLIENT: Entergy -IPEC SITE: Buchanan, NY PROJECT NO: DATE: SAMPLER(S):

41.0017869.1.0 10/2/06 A. Hough WATER QUALITY: Depthbto Specific t Dissolved ORP. Rate Pump Time Water pH Conductivity Turbidity Oxygen Temp 'C)Depth (fR) Notes (ft) (SU) (uS/m)C (mV) (mlmin)818 12.35 947 13.47 7.21 0.090 0 5.9 17.9 start purnp 952 13.42 6.99 0.090 0 1.9 17.6 14 -956 13.42 7.13 0.097 0 1.6 17.9 4 -1000 13.43 7.21 0.096 0 1.5 18.1 1004 13.47 7.26 0.096 0 1.4 18.2 -54 146.0-1008 13.50 7.27 0.096 4 1.2 18.6 -79 146.0 191 1012 13.51 7.28 0.096 0 0.9 18.8 -96 146.0 1016 13.53 7.29 .0.096 2 0.9 18.8 -114 --1020 13.57 7.28.. 0.097 3 0.6 18.7 .-'25 -1024 13.58 7.27 0.096 0 0.5 18.7 -130 -1028 13.60 7.27 0.096 0 0.5 18.9 -135 --1032 13.62 7.27 0.096 0 0.5 19.1 -134 -1036 13.64 7.27 0.096 0 0.5 19.3 -136 " sample taken 1155 13.99 7.28 0.098 89 4.2 20.2 13 100.0 start pump 1159 14.07 7.01 0.099 11 0.7 17.2 -66 400.0 1 1204 14.11 6.87 0.099 0 3.7 18.5 -17 400.0 1208 14.14 6.92 0.099 0 0.5 17.7 -37 200.0 1212 14.16 7.14 0.099 0 0.3 18.2 -56 ..93 1215 14.19. 7.24 0.099 0 0.3 17.8 -1216 pump shut off for 30 min 1246 14.22 7.31 0.099 0 2.9 20.6 61 -1250 14.27 7.21 0.099 0 2.5 20.4 43 --1254 14.30 7.16 0.099 0 2.2 20.2 38 -- sample taken 1333 14.28 7.27 0.099 0 2.1 20.2 22 200.0 stiartpump 1337 14.37 7.18 0.099 0 1.0 18.7 -88 1--1342 14.39 7.15 0.099 0 0.6 18.9 - 53.5 1346 14.40 7.09 0.099 0 0.3 19.1 -95 j--1350 14.41 7.07 0.099 0 0.4 19.3 -1354 14.42 7.09 0.099 0 0.3 18.7 " - sample taken NOTES AND OBSERVATIONS:

APPENDIX K CD CONTAINING PIEZOMETRIC DATA APPENDIX L HYDROGRAPHS

APPENDIX M TRANSDUCER INSTALLATION LOGS TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U-3-T1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5548 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)2.00 3.267 8.518 2 DATUM DATE NGVD 29 6/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)4.22 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR....

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (÷ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 2.00 3.267 8.518 above 5.251 14:28 TOC 4.30 2.573 6.873+I FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS___ a GROUND,." SURFACE Bi A A WATER TABLE I.qJ C)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C'PO II:L CABLE ................

1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

8.518-- 4.30-4.218 U3-T1 20 14:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM ................

.............

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Depth to bottom is from ground surface.GZA IWELL ID :1 U-3-T1 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U-3-T1 1 oft1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5548 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)2.00 3.267 8.518 2 DATUM DATE NGVD 29 2/16/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.98 CABLE CONNECTOR

.............

.... 1 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 2.00 3.267 8.518 above 5.251 13:57 TOC 5.18+ 1.917-7.097 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT Ir____ B-.,.GROUND..SURFACE WATER.TABLE A Bi-A.A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:~~.1 C)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check 0-CABLE .........................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

8.518-- 5.18= 2.978 U3-T1 20 13:59 TEST NAME: LOGGING INTERVAL: TEST START TIME: FT M.S.L.FT FT M.S.L.MIN HRS PRESSUR. E .................

TRANSDUCER SENSOR ......WELL BOTTOM 0 v If..................

...a.....V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Batteries replaced.Depth to bottom is from ground surface.GZA IWELL ID :] U-3-T1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U-3-T1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5977 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)2.00 3.267 8.518 2 DATUM DATE NGVD 29 3/20/07 STATIC GROUNDWATER TABLE ELEVATION (FT)3.80 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -I: MEASURED CABLE LENGTH: 2.00 3.267 8.518 above 5.251 11:54 TOC 4.72+ 1.545= 6.265 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS___ 4 GROUND: SURFACE WATER .TABLE A I--I-.A.A v-41 C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C IC CABLE .............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

8.518-- 4.72= 3.798 U3-T1 20 11:58 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

.................

TRANSDUCER SENSOR ....WELL BOTTOM ....................

v7 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Depth to bottom is from ground surface.GZA IWELL ID: U-3-T1 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U-3-T1 1 of 1 41.0017869.10 Indian Point 4 MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3062 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)2.00 3.267 8.518 2 DATUM DATE NGVD 29 4/24/07 STATIC GROUNDWATER TABLE ELEVATION (FT)4.02 GZA ENGINEER A. Hough/S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

1 0 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 2.00 3.267 8.518 above 5.251 13:49 TOC 4.50+ 2.404= 6.904 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS/GROUND." SURFACE WATER.TABLE A S.A A iF xz-J 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I-IC CABLE .......................

4 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

8.518-- 4.50= 4.018 U3-T1 20 13:52 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ........WELL BOTTOM .......V v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/TOP OF CASING NOTES: Depth to bottom is from ground surface.GZA IWELL ID ] U-3-T1 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U-3-T2 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 2.00 DATUM NGVD 29 MAKE MiniTroll GROUND ELEVATION (FT) 3.259 DATE 6/19/06 PSI CAPACITY 30 CASING ELEVATION (FT) 8.512 SERIAL NUMBER 16240 CASING DIAMETER (INCH) 2 STATIC GROUNDWATER TABLE ELEVATION (FT)4.12 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

............

......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 2.00 3.259 8.512 above 5.253 14:39 TOC 4.39+ 4.122= 8.512 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS N GROUND./SURFACE WATER .TABLE 04-.A A Fr-q!C)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?On 14-ll::ý, CABLE ..............

...........

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

8.512-- 4.394.122 U3-T2 20 14:46 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ...... ....WELL BOTTOM .......V V LEGEND: DIW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Depth to bottom is from ground surface.GZA IWELL ID :] U-3-T2 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U-3-T2 1 of 1 41.001786910 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16240 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)2.00 3.259 8.512 2 DATUM DATE NGVD 29 4/24/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.10 CABLE CONNECTOR

........................

0 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 2.00 3.259 8.512 above 5.253 13:55 TOC 4.41+ 2.415= 6.825 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4-, GROUND.SURFACE WATER TABLE A I-.A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: zz-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE .....................

"*Ai ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

8.512-4.41= 4.102 U3-T2 20 13:59 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

WELL BOTTOM ................

0 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Depth to bottom is from ground surface.GZA IWELL ID :1 U-3-T2 0 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID 1-2 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 41.00 DATUM NGVD 29 MAKE MiniTroll GROUND ELEVATION (FT) 98.70 DATE 8/1/06 PSI CAPACITY 30 CASING ELEVATION (FT) -100.00 SERIAL NUMBER 11972 CASING DIAMETER (INCH) 2 STATIC GROUNDWATER TABLE ELEVATION (FT) *68.53 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR....

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 41.00 98.70 100.00 above 1.30 11:21 TOC 31.47+ 9.412= 40.882 FT*FT M.S.L.*FT M.S.L.FT FT HRS FT FT FT 4.-, GROUND..-'

SURFACE Bi-i.-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: WATER TABLE xz-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE .............................

I V-J 0 1-i ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

100.00-- 31.47=, 68.53 U2-CST 20 11:24*FT M.S.L.FT*FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR ..........

WELL BOTTOM It LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: *At time of installation, casing and ground surface elevations had not yet been surveyed.Casing elevation used to evaluate groundwater elevation was estimated to be 100 ft mst.Actual casing elevation is 82.23 ft mst. Actual static groundwater elevation is 50.76 ft mst.GZA IWELL ID:1 1-2 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION 1-2 1 of 1 41.0017869.10 Indian Point I I -,W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11972 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT) -CASING DIAMETER (INCH)41.00 98.70 100.00 2 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)69.45 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 41.00 98.70 100.00 above 1.30 7:50 TOC 30.55+ 10.419= 40.969 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT*FT M.S.L.*FT M.S.L.FT FT HRS FT FT FT check check*FT M.S.L.FT*FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE A ac-xz-A~~.1 0 F A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?am CABLE ........................

0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

100.00-- 30.55-" 69.45 1-2 20 7:51 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ...... .....WELL BOTTOM ........0 V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: *At time of installation, casing and ground surface elevations had not yet been surveyed.Casing elevation used to evaluate groundwater elevation was estimated to be 100 ft msl.Actual casing elevation is 82.23 ft mal. Actual static groundwater elevation is 50.76 ft msl.GZA IWELL ID] 1-2 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID 1-2 440 NINTH AVENUE, 18th FLOOR Entergy SHEET l of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11972 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)41.00 80.92 82.23 2 DATUM DATE NGVD 29 11/22/06 51.81 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR*

..*.........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

TEST NAME: LOGGING INTERVAL: TEST START TIME: 41.00 80.92 82.23 above 1.31 10:17 TOC 30.42+ 10.568= 40.988 82.23-- 30.42-- 51.81 1-2 20 10:18 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS.~- 4--, GROUND: SURFACE WATER TABLE.A V A~qJ C.)NY CABLE .......................

A I-PRESSURE..........

TRANSDUCER SENSOR....

......WELL BOTTOM ...........

... -.. .. .1 LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 -2 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID 1-2 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11972 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)41.00 80.92 82.23 2 DATUM DATE NGVD 29 412/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli, ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)51.31 CABLE CONNECTOR

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 41.00 80.92 82.23 above 1.31 10:13 TOC 30.92+ 9.698= 40.618 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4-, 4 GROUND-SURFACE WATER TABLE A-.ct-A A F ,4, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C£-CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

82.23-- 30.92-- 51.31 1-2 20 10:19 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ......WELL BOTTOM .................

V v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL I:1 1-2 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID 1-2 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 41.00 DATUM NGVD 29 MAKE MiniTroll GROUND ELEVATION (FT) 80.92 DATE 5122/07 PSI CAPACITY 30 CASING ELEVATION (FT) 82.23 SERIAL NUMBER 11972 CASING DIAMETER (INCH) 2 STATIC GROUNDWATER TABLE ELEVATION (FT)50.07 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 41.00 80.92 82.23 above 1.31 11:58 TOC 32.16+ 8.320-40.480 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND...'

SURFACE WATER TABLE A I-=A A r.4.J 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?O-CABLE ........................

lll ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

82.23-- 32.16-= 50.07 1-2 20 11:59 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR .....WELL BOTTOM ........... r T V............

&T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 I-2 TRANSDUCER INSTALLATION LOCG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO PROJECT LOCATION MW-30 1 of 1 41.0017869.10

]Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 7540 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)89.70 80.00 78.30 4 DATUM DATE NGVD 29 6/22/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)12.39 CABLE CONNECTOR...

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?89.70 80.00 78.30 below-1.70 9:20 GS 67.61+ 15.54= 83.15 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m 4 GROUND.:: SURFACE WATER.TABLE zz--A 34--I A A.qJ 0 cic-CABLE .......................

"1" ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

80.00-- 67.61= 12.39 MW-30 20 9:24 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR .........WELL BOTTOM .........V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-30 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-31 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 10030 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)90.10 79.679 79.583 4 DATUM DATE NGVD 29 6/21/06 STATIC GROUNDWATER TABLE ELEVATION (FT)45.23 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

-.... ..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 90.10 79.679 79.583 below-0.090 7:51 TOC 33.11+ 45.740"" 78.850 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS U GROUND..SURFACE WATER.TABLE ac-A.A Ir z--/I C-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..............................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

78.339-- 33.11= 45.229 MW-31 20 7:52 0-TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ......WELL BOTTOM .............

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-31 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-31 1 Of 1 41.0017869.10 Indian Point d MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 10030 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)90.10 79.679 79.583 4 DATUM DATE NGVD 29 9/1/06 STATIC GROUNDWATER TABLE ELEVATION (FT)46.37 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 90.10 79.679 79.583 below-0.090 1252 TOC 31.97+ 46.826-" 78.796 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS If GROUND-SURFACE WATER TABLE z-7 A I-=-I A A-I HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CI-CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

78.339-- 31.97= 46.369 MW-31 20 1253 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR..

..............

TRANSDUCER SENSOR.WELL BOTTOM ......It V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-31 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-31 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 10030 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)90.10 79.679 79.583 4 DATUM DATE NGVD929 9/15/06 50.22 STATIC GROUNDWATER TABLE ELEVATION (FT) *GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (it transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 90.10 79.679 79.583 below-0.090 1354 TOC 27.53+ 49.260=- 76.790 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check*FT M.S.L.FT*FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE CABLE .....................

A-"a C.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?A I--VF ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

77.750-- 27.53"- 50.220 MW-31 20 1356 V TEST NAME: LOGGING INTERVAL: TEST START TIME: TRANSDUCER SENSOR ........WELL BOTTOM-..

..........

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Water level referenced to an invalid elevation.

Actual top of casing elevation at the time of reference was 79.583' msl.Actual groundwater elevation at the time of reference was 52.053' msl.GZA IWELL ID : MW-31 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-32 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5385 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)198.70 78.939 78.339 4 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)12.54 CABLE CONNECTOR

................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -I: MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?198.70 78.939 78.339 below-0.600 8:10 TOC 65.80+ 32.596-- 98.396 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS*GROUND..SURFACE WATER TABLE A I--I-A~~1 U A&1i-CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

78.339-- 65.80= 12.539 MW-32 20 8:31 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.

.................

TRANSDUCER SENSOR ............

WELL BOTTOM ................

0 0 0 V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: At time of transducer installation, this well was packered off at approximately

-6 ft elevation.

Transducer was installed in the deeper interval (-6 ft to -120 ft elevation).

GZA IWELL ID:] MW-32 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5385 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)198.70 78.939 78.339 4 DATUM DATE NGVD 29 9/1/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)21.64 CABLE CONNECTOR

......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 198.70 78.939 78.339 below-0.600 9:04 TOC 56.70+ 45.233= 101.933 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F-..4 GROUND..SURFACE WATER TABLE si A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C-4 , J I a CABLE .....................

........ *IC ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

78.339-- 56.70=" 21.639 MW-32 5 9:19 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

WELL BOTTOM'...

.........V t LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: At time of transducer installation, this well was packered off at approximately

-6 ft elevation.

Transducer was installed in the deeper interval (-6 ft to -120 ft elevation).

GZA IWELL I:1 MW-32 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-33 1lof 1 41.0017869.10 AN Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4386 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.859 18.619 4 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)10.95 CABLE CONNECTOR

.........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?30.00 18.859 18.619 below-0.240 10:40 TOC 7.67+ 17.455=- 25.125 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS v.,. U , GROUND:-SURFACE WATER.TABLE A I--I-A A 7-/.qJ C-)Ci-CABLE .........

...............

"1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.619-- 7.67-10.949 MW-33 20 10:46 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..... .......WELL BOTTOM .... .......fl F V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ,:I MW-33 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-33 440 NINTH AVENUE, 18th FLOOR Entergy I SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4386 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.859 18.619 4 DATUM DATE NGVD729 7/18/06 11.62 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR -): MEASURED CABLE LENGTH: 30.00 18.859 18.619 below-0.240 9:25 TOC 7.00+ 17.455=- 24.455 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4.-.4 GROUND-.-'

SURFACE WATER.TABLE A Bic A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: C.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check--CABLE ...................

"*C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.619-- 7.00= 11.619 MW-33 20 9:26 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURFE

..........

TRANSDUCER SENSOR ...... ...A WELL BOTTOM .....................

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-33 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-33 1 oft1 41 .001 7869.10 Indian Point is 1=IW MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4386 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.859 18.619 4 DATUM DATE NGVD 29 10/18/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)11.55 CABLE CONNECTOR

...... ...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 30.00 18.859 18.619 below-0.240 1139 TOC 7.07+ 18.428-25.498 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/.SURFACE WATER TABLE A ac-A A v xz--Il 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Ci-CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.619-- 7.07-- 11.549 MW-33 20 1141 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ........WELL BOTTOM ........41)ý6 V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID : MW-33 S TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-33 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5385 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.859 18.619 4 DATUM DATE NGVD 29 4/4/07 10.52 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 30.00 18.859 18.619 below-0.240 9:40 TOC 8.10+ 17.270=- 25.370 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE.................

0. ýV _A S.A~~1 C.,.-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE. ............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.619-- 8.10= 10.519 MW-33 20 9:41 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURIý...............

TRANSDUCER SENSOR....

WELL BOTTOM...V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-33 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-34 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3894 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)29.20 18.481 18.071 4 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)10.67 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 29.20 18.481 18.071 below-0.410 11:12 TOC 7.40+ 17.993=- 25.393 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS U--,..4 GROUND..SURFACE WATER TABLE A A A Ir C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-i CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.071-- 7.40=- 10.671 MW-34 20 11:23 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR .......WELL BOTTOM ........v..........

.LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ,o:I MW-34 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-34 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3894 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)29.20 18.481 18.071 4 DATUM DATE NGVD 29 10/4/06 4.60 STATIC GROUNDWATER TABLE ELEVATION (FT) *GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (÷ OR -): MEASURED CABLE LENGTH: 29.20 18.481 18.071 below-0.410 10:11 TOC 13.47+ 17.391-" 30.861 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.*FT FT M.S.L.MIN HRS 4 GROUND..: SURFACE WATER.TABLE A A A&If HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I-CABLE ... .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.071-13.47-" 4.601 MW-34 20 10:12 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ....... .WELL BOTTOM-..

..............

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/TOP OF CASING NOTES:*Depth to water measurement possibly taken in error due to product in well.GZA IWELL ID: MW-34 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-34 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3894 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)29.20 18.481 18.071 4 DATUM DATE NGVD 29 11/6/06 10.17 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 29.20 18.481 18.071 below-0.410 14:53 TOC 7.90+ 17.558= 25.458 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m GROUND.SURFACE WATER TABLE................

0. ýS 7 A=I-A A-!pj C j HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?c-CABLE .......................

"1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.071-- 7.9010.171 MW-34 20 14:53 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..........

TRANSDUCER SENSOR ...........

WELL BOTTOM ............

v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: MW-34 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-34 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3894 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)29.20 18.481 18.071 4 DATUM DATE NGVD 29 4/4/07 10.57 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.................

10-DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR -): MEASURED CABLE LENGTH: 29.20 18.481 18.071 below-0.410 10:09 TOC 7.50+ 18.154= 25.654 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4-, GROUND/.SURFACE WATER.TABLE A 6-ýA A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: ,.1 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C F CABLE ...................

..ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.071-- 7.50= 10.571 MW-34 20 10:10 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ............

WELL BOTTOM*..

.........., 0 -.v'LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-34 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-35 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 195 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)29.80 18.604 18.444 4 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)10.84 CABLE CONNECTOR

........................

10ýDEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?29.80 18.604 18.444 below-0.160 11:46 TOC 7.60+ 17.069-" 24.669 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.:" SURFACE A I-=-I A.A WATER TABLE 0-I.'C.).-CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.444-- 7.60-= 10.844 MW-35 20 11:53 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ....WELL BOTTOM.]V v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-35 ITRANSUCEU R INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-35 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 195 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)29.80 18.604 18.444 4 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)9.92 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR -): MEASURED CABLE LENGTH: 29.80 18.604 18.444 below-0,160 14:56 TOC 8.52+ 17.069= 25.589 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND,: SURFACE WATER .TABLE ac-V A A F.41 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C-CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.444-- 8.52= 9.924 MW-35 20 14:57 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..........

WELL BOTTOM`...

..............

.... rL V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CAOLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :j MW-35 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-35 1 of1 I I 41.0017869.10 J Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 195 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)29.80 18.604 18.444 4 DATUM DATE NGVD 29 2/20/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)9.25 CABLE CONNECTOR

......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?29.80 18.604 18.444 below-0.160 8:57 TOC 9.19+ 15.348= 24.538 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4.-.GROUND: SURFACE WATER TABLE A a-A A-'-I C-, C I-C CABLE ...............................

C 4 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.444-- 9.19-9.254 MW-35 20 8:58 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR .........WELL BOTTOM .......A ,4~j v'v.a.v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-35 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-35 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 195 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)29.80 18.604 18.444 4 DATUM DATE NGVD 29 4/9/07 STATIC GROUNDWATER TABLE ELEVATION (FT)10.56 GZA ENGINEER S .Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: CABLE CONNECTOR

.....................

29.80 18.604 18.444 below-0.160 13:11 TOC 7.88+ 17.650= 25.530 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE RI-1-mi A A WATER TABLE................

.ýý 7-.-'C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?=D CABLE ...........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.444-- 7.88 I 10.564 MW-35 20 13:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..........

WELL BOTTOM .............

16 V V LEGEND: D1"W -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-35 TRANSDUCER INSTALLATION LOC-GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-36-26 1 of 1 I I 41.0017869.10 I .Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9445 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.393 2 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)9.68 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 26.00 11.799 11.393 below-0.406 13:33 TOC 1.71+ 22.071-23.781 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS*FT FT FT check check FT M.S.L.*FT FT M.S.L.MIN HRS*1* ~GROUND..SURFACE ll-ýA A m WATER TABLE xz-g~HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?1i-CABLE ...................

I ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.393-- 1.71= 9.683 MW-36-26 20 13:34 PRESSURE TRANSDUCER SENSOR ....... ......WELL BOTTOM ................

TEST NAME: LOGGING INTERVAL: TEST START TIME: t t LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Depth to water measurement probably taken in error.GZA IWELL ID :1 MW-36-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-36-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ -MiniTroll 30 9445 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.393 2 DATUM DATE NGVD 29 9/29/06 STATIC GROUNDWATER TABLE ELEVATION (FT)6.69 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASURE1MENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?26.00 11.799 11.393 below-0.406 11:46 TOC 4.70+ 20.070= 24.770 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r GROUND: SURFACE WATER .TABLE BI-1-ýA A-4 0.H.-CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.393-- 4.70= 6.693 MW-36-26 20 11:47 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUFRE

.................

TRANSDUCER SENSOR ..........

WELL BOTTOM ............

F v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID : MW-36-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-36-26 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9445 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.393 2 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)6.63 CABLE CONNECTOR

..................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 26.00 11.799 11.393 below-0.406 8:49 TOC 4.76+ 20.242"- 25.002 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS*1* *U*4 GROUND..-SURFACE A I4-WATER TABLE A m A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Ci-CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.393-- 4.76= 6.633 MW-36-26 20 8:49 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...........

WELL BOTTOM"..

..........

.... H'v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-36-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-36-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9445 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.393 2 DATUM DATE NGVD 29 12/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)6.39 CABLE CONNECTOR

..................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 26.00 11.799 11.393 below-0.406 10:53 TOC 5.00+ 20.093= 25.093 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND." SURFACE WATER .TABLE ac-1-mi+A A II zz-~~1 C)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?c-CABLE ..............................

1" ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.393-- 5.00= 6.393 MW-36-26 20 10:56 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR F.. ...............

TRANSDUCER SENSOR ......WELL BOTTOM 0,~It V A L LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWL ID MW-36-26 IWELL ID :1 MW-36-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-36-26 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9445 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.393 2 DATUM DATE NGVD 29 2/20/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)6.88 CABLE CONNECTOR

......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 24.00 11.799 11.393 below-0.406 10:20 TOC 4.51+ 20.389-" 24.899 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER.TABLE z\-I-.V A A Ir-'-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?.-CABLE ........................

00" ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.393-- 4.51= 6.883 MW-36-26 20 10:21 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ............

WELL BOTTOM .................

r L v.........

Jk V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELLID :1 MW-36-26 TRANSDUCER INSTALLATION LOCH GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-36-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9401 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.393 2 DATUM DATE NGVD 29 3/22/07 7.11 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 24.00 11.799 11.393 below-0.406 10:29 TOC 4.28+ 18.221"- 22.501 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS I GROUND, SURFACE.A.A WATER TABLE-qJ HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I" F CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.393-- 4.28-" 7.113 MW-36-26 20 10:30 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER v SENSOR ........WELL BOTTOM ... ........v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer replaced with a re-calibrated transducer.

GZA IWELL ID :1 MW-36-26 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-36-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9401 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.393 2 DATUM DATE NGVD 29 3/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.12 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (÷) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): 24.00 11.799 11.393 below-0.406 11:58 TOC 4.27+ 19.224= 23.494 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS II r GROUND.!SURFACE WATER.TABLE A I-A-A A r 0 C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.393-- 4.27-" 7.123 MW-36-26 20 12:24 I-TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUFE .................

TRANSDUCER SENSOR ............

WELL BOTTOM .......V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA [WELL ID :1 MW-36-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-36-24 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9401 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.563 2 DATUM DATE NGVD 29 5/9/07 STATIC GROUNDWATER TABLE ELEVATION (FT)8.10 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR °): 24.00 11.799 11.563 below-0.236 14:19 TOC 3.46+ 20.045= 23.505 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.., SURFACE ac 1-mi-A A IF WATER TABLP 0-4.1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I.CABLE .......................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.563-- 3.46-8.103 MW-36-26 20 14:20 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ............

WELL BOTTOM.. .0 LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

New casing elevation; PVC coupling attached to well GZA IWELL ID: MW-36-24 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-36-24 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9401 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.563 2 DATUM DATE NGVD 29 5/17/06 STATIC GROUNDWATER TABLE ELEVATION (FT)7.98 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?24.00 11.799 11.563 below-0.236 13:14 TOC 3.58+ 19.642= 23.222 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER.TABLE.A I-xz-A~~.1 0 A ci-CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.563-- 3.58=- 7.983 MW-36-26 20 13:16 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ...........

WELL BOTTOM .......LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID I MW-36-24 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-36-40 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9401 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)-CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.604 1 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)9.66 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 40.00 11.799 11.604 below-0.195 13:43 TOC 1.94+ 22.097"- 24.037 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 1 r TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: GROUND..SURFACE WATER .TABLE CABLE .....................

PRESSURI .................

TRANSDUCER A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.604-- 1.94= 9.664 MW-36-40 20 13:45 FT M.S.L.FT FT M.S.L.MIN HRS~~1 C-, I TEST NAME: LOGGING INTERVAL: TEST START TIME: fIl LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-36-40 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-36-40 1 of 1 41.0017869.10 I m Indian Point L MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9401 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.604 1 DATUM DATE NGVD 29 10/4/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.96 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?40.00 11.799 11.604 below-0.195 9:50 TOC 2.64+ 21.271= 23.911 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4-GROUND: SURFACE A I--I-WATER TABLE A A.I I I'CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.604-- 2.64-- 8.964 MW-36-40 20 9:51 PRESSURE ..................

TRANSDUCER TEST NAME: LOGGING INTERVAL: TEST START TIME: V v SENSOR ............

WELL BOTTOM .................

.... ...LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-36-40 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID 'MW-36-40 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9401 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.604 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)6.48 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-I) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 40.00 11.799 11.604 below-0.195 8:58 TOC 5.12+ 18.941= 24.061 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/SURFACE WATER TABLE A A F-'-I 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.604-- 5.12= 6.484 MW-36-40 20 8:59 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E.........

TRANSDUCER SENSOR .........WELL BOTTOM..LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-36-40 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-36-53 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 2280 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.492 1 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.79 CABLE CONNECTOR-...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

TEST NAME: LOGGING INTERVAL: TEST START TIME: 53.00 11.799 11.492 below-0.307 13:51 TOC 3.70+ 46.271-- 49.971 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r GROUND.SURFACE A A A WATER TABLE 7 0. ýý.................-Il C.)'p CABLE ...........................

11.492-- 3.70-7.792 MW-36-53 20 13:52 PRESSURE .................

TRANSDUCER SENSOR ...........

WELL BOTTOM ..........

..v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: MW-36-53 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-36-53 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 2280 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.492 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)5.88 CABLE CONNECTOR

......................

00 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?53.00 11.799 11.492 below-0.307 8:53 TOC 5.61+ 44.477" 50.087 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4-, 4 GROUND.!SURFACE WATER TABLE A I-Bic A A z-7.5 C.C I.C CABLE ...................

-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.492-- 5.61= 5.882 MW-36-53 20 8:55~i~0 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR .. ..............

TRANSDUCER SENSOR ..... .......WELL BOTTOM ........v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-36-53 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-36-52 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5965 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.670 1 DATUM DATE NGVD 29 5/31/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.06 CABLE CONNECTOR-....

....DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 52.00 11.799 11.670 below-0.129 8:44 TOC 3.61+ 22.471= 26.081 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT v 4 GROUND..SURFACE A A.A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: WATER TABLE xz--qJ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I.CABLE ..................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.670-3.61= 8.060 MW-36-53 20 8:45 FT M.S.L.FT FT M.S.L.MIN HRS 0 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..... .......WELL BOTTOM-*----

01 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-36-52 TRANSDUCER INSTALLATION LOG---GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-36-52 1 of 1 41 .0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5965 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)54.00 11.799 11.670 1 DATUM DATE NGVD 29 6/11/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.77 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?52.00 11.799 11.670 below-0.129 12:52 casing 2.90+ 48.545= 51.445 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r U GROUND..: SURFACE WATER TABLE Bi x--J)CABLE ........................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.670-- 2.90-- 8.770 MW-36-52 20 12:53 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ......WELL BOTTOM ........",..,k v LEGEND: DTIN -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELLID :1 MW-36-52 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-37-22 1 Of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6753 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.784 2 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)5.90 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?22.00 15.021 14.784 below-0.237 14:05 TOC 8.88+ 12.756= 21.636 FT FT M.SL.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER.TABLE CABLE ......................

PRESSURE ..................

TRANSDUCER A I-.A A vz C.S J)C-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.784-- 8.88= 5.904 MW-37-22 20 14:11 TEST NAME: LOGGING INTERVAL: TEST START TIME: V It SENSOR....

WELL BOTTOM .................

v LEGEND: D'IV -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-37-22 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-22 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.001.7869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6753 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.784 2 DATUM DATE NGVD 29 8/23/06 STATIC GROUNDWATER TABLE ELEVATION (FT)5.37 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 22.00 15.021 14.784 below-0.237 8:26 TOC 9.41+ 12.367= 21.777 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.-: SURFACE WATER .TABLE 4.A A Ir zz-C-, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.784-- 9.41=" 5.374 MW-37-22 20 8:28 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR.......

WELL BOTTOM .........'V v I " LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-37-22 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MWN-37-22 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6753 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.784 2 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.50 CABLE CONNECTOR

......................

I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?22.00 15.021 14.784 below-0.237 9:08 TOC 10.28+ 10.875= 21.155 FT FT M.S.L.FT M.S.L, FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS*GROUND..SURFACE A: I-WATER A E ................

TABLE A~qJ C.)A I.CABLE ...........................

11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.784-- 10.28= 4.504 MW-37-22 20 9:09 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR.WELL BOTTOM .................................................................

a..LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: MW-37-22 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-22 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6753 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.784 2 DATUM DATE NGVD 29 12/13/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.24 CABLE CONNECTOR

......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?22.00 15.021 14.784 below-0.237 11:40 TOC 10.54+ 10.630-- 21.170 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT GROUND.SURFACE A I--I-WATER TABLE check check CABLE .....................

A.C-.IP-A ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.784-- 10.54= 4.244 MW-37-22 20 11:41 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR ..........)k: P, WELL BOTTOM ...............

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA WELL I'D MW-37-22 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-37-22 1 of 1 41.0017869.10.a Indian Point IW MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.784 2 DATUM DATE NGVD 29 1/4/07 STATIC GROUNDWATER TABLE ELEVATION (FT)4.42 GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 22.00 15.02 14.78-0.24 9:49 TOC 10.33+ 10.90"" 21.23 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND..-SURFACE WATER.TABLE A mc-1-i.zz-A~~1 0 I)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ........................

1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.75-- 10.33"= 4.42 MW37-22 20 9:51 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..........

TRANSDUCER v SENSOR ............

WELL BOTTOM ......LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-37-22 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-22 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 0CIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6753 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.784 2 DATUM*** DATE NGVD 29 3/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)4.84 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 22.00 15.02 14.78-0.24 13:05 TOC 9.94+ 11.96= 21.90 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: 6HEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS/GROUND: SURFACE WATER TABLE A-1+A A zz---qJ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?90 11-11:ý3 CABLE ..................

I ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.78-- 9.94= 4.84 MW37-22 20 13:08 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR ...........

TRANSDUCER SENSOR ............

WELL BOTTOM....

0 v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA I WELL ID:1 MW-37-22 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-22 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6753 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.852 2 DATUM DATE NGVD 29 5/15/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.57 CABLE CONNECTOR-.....

.............

I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 22.00 15.021 14.852 below-0.17 13:18 TOC 10.21+ 11.68-21.89 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check*FT M.S.L.FT*FT M.S.L.MIN HRS GROUND...'

SURFACE WATER TABLE A ac-=:m.4.4 r-qJ C-, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?On CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.784-- 10.21=- 4.574 MW37-22 20 13:18 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR..........

TRANSDUCER SENSOR..........

WELL BOTTOM""---...

0 V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Transducer referenced to an elevation in error. Actual top of casing elevation at time of reference was 14.784 ft msa.Actual groundwater elevation at time of reference was 4.642' msl.GZA IWELL ID :1 MW-37-22 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9904 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.725 1 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.92 CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE M+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?32.00 15.021 14.725 below-0.296 14:00 TOC 5.81+ 17.317-- 23.127 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS f GROUND..SURFACE WATER.TABLE A a4-A&A xz-.-'-C.On CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.725-- 5.81-" 8.915 MW-37-32 20 14:08 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR.WELL BOTTOM....

y~~0 V LEGEND: DiW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-37-32 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-37-32 1 of 1 41.0017869.10 Indian Point 1W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9904 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.725 1 DATUM DATE NGVD 29 10/4/06 5.61 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?32.00 15.021 14.725 below-0.296 10:41 TOC 9.12+ 17.151= 26.271 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r GROUND-.;SURFACE WATER TABLE.................

1. ý1 7 A Bi A A O-C A B L E ..... .........

....... ........ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.725-- 9.12= 5.605 MW-37-32 20 10:43 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM ........V v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-37-32 ITRANSUUCLE INT IALLATION LU(Q GZA G9OENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1, NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9904 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.725 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning property)4.58 CABLE CONNECTOR

.........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?32.00 15.021 14.725 below-0.296 9:25 TOC 10.15+ 16.179= 26.329 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-." SURFACE WATER.TABLE v-a 4-..I-.A.A.J 0.-CABLE ......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.725-- 10.15= 4.575 MW-37-32 20 9:25 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR..........

WELL BOTTOM....

0 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-37-32 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5548 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.791 1 DATUM DATE NGVD 29 5/30/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)5.42 CABLE CONNECTOR

................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 32.00 15.021 14.791 below-0.230 15:45 TOC 10.15+ 17.091= 27.241 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS.4 GROUND.: SURFACE WATER TABLE am A& .____ F-,-0 Oq HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Ci-CABLE ..........................

"11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.791-- 9.37= 5.421 MW-37-32 20 15:47 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .............

TRANSDUCER SENSOR .....WELL BOTTOM ..........

Yr i'LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Well re-surveyed; new elevation used to reference transducer.

GZA IWELL ID :I MW-37-32 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5548 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.791 1 DATUM DATE NGVD 29 6.11.07 6.28 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S.Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 32.00 15.021 14.791 below-0.230 9:11 TOC 8.51+ 23.141-31.651 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m 4 GROUND.: SURFACE WATER TABLE................

0. ý7 -A."a.0.A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-i CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.791-- 8.51= 6.281 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-37-32 20 9:14 PRESSURE........

TRANSDUCER SENSOR.WELL BOTTOM ..............

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL- CABLE LENGTH FROM SENSOR TO GROUND SURFACE/TOP OF CASING NOTES:

Well re-surveyed; new elevation used to reference transducer.

GZA WELL ID: MW-37-32 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-40 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16104 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.790 1 DATUM DATE NGVD 29 6/20/06 4.67 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 40.00 15.021 14.790 below-0.231 14:20 TOC 10.12+ 15.375-25.495 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS*1' ~4 GROUND_./SURFACE A I--I-AA v WATER TABLE.................

I. ý=~~1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?IF CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.790-- 10.12= 4.670 MW-37-40 20 14:22 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..... ......v7 WELL BOTTOM LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID : MW-37-40 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-40 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16104 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.790 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.84 CABLE CONNECTOR

.............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 40.00 15.021 14.790 below-0.231 9:14 TOC 9.95+ 16.339-- 26.289 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE xz--A a-v A 0:.A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CP CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.790-- 9.95"= 4.840 MW-37-40 20 9:15 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR .............

V ^r,, K OTTOLL BOTTOM ......F LEGEND: D"W -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-37-40 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-40 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 2280 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.852 1 DATUM DATE NGVD 29 6/19/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)12.06 CABLE CONNECTOR

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 40.00 15.021 14.852 below-0.169 9:11 TOC 2.79+ 37.993= 40.783 FT FT M.S.L.FT M.S.L.FT FT HRS*FT FT FT IF I-GROUND..SURFACE WATER TABLE A I-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.852-2.79-= 12.062 MW-37-40 20 9:13 FT M.S.L.*FT*FT M.S.L.MIN HRS 01 14 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR .....WELL BOTTOM ........Yr LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Depth to water measurement probably taken in error.GZA IWELL ID :1 MW-37-40 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-57 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5619 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.723 1 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)7.97 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 57.00 15.021 14.723 below-0.298 14:10 TOC 6.75+ 42.440= 49.190 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: GROUND".SURFACE WATER.TABLE CABLE .....................

A A CD.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check=i-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.723-- 6.75-7.973 MW-37-57 20 14:15 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: TRANSDUCER SENSOR .............

WELL BOTTOM...

.i LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:I MW-37-57 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-57 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5619 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.723 1 DATUM DATE NGVD 29 6/22/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.13 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?57.00 15.021 14.723 below-0.298 9:22 TOC 6.59+ 18.925-= 25.515 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS*4 GROUND..SURFACE WATER TABLE ac-F-I A. A xz-/,0.C i-£c CABLE ..................

I *ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.723-- 6.59= 8.133 MW-37-57 20 9:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ............

WELL BOTTOM ..............

v Yr LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-37-57 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-57 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5619 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.723 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)5.88 CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 57.00 15.021 14.723 below-0.298 9:20 TOC 8.84+ 20.778= 29.618 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT ,. U--, GROUND/'SURFACE WATER.TABLE A A A.TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: xz-y DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C I1-£c CABLE .............................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.723-- 8.84= 5.883 MW-37-57 20 9:21 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..............

TRANSDUCER SENSOR ..........

WELL BOTTOM .........H T LEGEND: DIW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-37-57 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-37-57 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5359 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.788 1 DATUM DATE NGVD 29 5/30/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.07 CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 57.00 15.021 14.788 below-0.233 15:49 TOC 7.72+ 43.691= 51.411 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m GROUND: SURFACE WATER.TABLE A V A A 4.1J C-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?'P CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.788-7.72= 7.068 MW-37-57 20 15:50 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR...........

TRANSDUCER SENSOR............

WELL BOTTOM....

'V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-37-57 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-37-57 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5359 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.788 1 DATUM DATE NGVD629 6/12/07 8.25 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (÷) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 56.50 15.021 14.788 below-0.233 13:08 TOC 6.54+ 43.938= 50.478 FT FT M.S.L.FT M.S.L FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-SURFACE WATER TABLE A A A J 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Imp CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.788-- 6.548.248 MW-37-57 20 13:30 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR ..................

TRANSDUCER SENSOR..........

WELL BOTTOM .................

Ii v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-37-57 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-37-57 1 of 1 41.0017869.10 I Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11802 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)57.00 15.021 14.788 1 DATUM DATE NGVD 29 6/19/07 STATIC GROUNDWATER TABLE ELEVATION (FT)8.11 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 56.50 15.021 14.788 below-0.233 9:28 TOC 6.68+ 49.611= 56.291 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE ea A A Ir~,.1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-CABLE ....................

I ".ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.788-- 6.68= 8.108 MW-37-57 20 9:29 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR............

WELL BOTTOM ...........

v'v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]: MW-37-57 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-38 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 40.00 DATUM NGVD 29 MAKE MiniTroll GROUND ELEVATION (FT) 14.342 DATE 6/19/06 PSI CAPACITY 30 CASING ELEVATION (FT) 13.990 SERIAL NUMBER 16236 CASING DIAMETER (INCH) 4 STATIC GROUNDWATER TABLE ELEVATION (FT)3.59 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..........

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 40.00 14.342 13.990 below-0.35 8:22 TOC 10.40+ 28.352-38.752 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT I GROUND.." SURFACE WATER TABLE 1 A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:.1)a C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE ..............................

"£C Ik C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.990-- 10.40= 3.590 MW-38 20 8:24 FT M.S.L.FT FT M.S.L.MIN HRS T TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR .....WELL BOTTOM..........

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID : MW-38 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-38 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16236 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 14.342 13.990 4 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.18 CABLE CONNECTOR

......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (.) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?40.00 14.342 13.990 below-0.35 13:12 TOC 9.81+ 34.59444.404 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r a GROUND.: SURFACE WATER TABLE x--A ac--i-L A~qJ 0 CABLE ...............................

A.1-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.990-- 9.81= 4.180 MW-38 20 13:13 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR..........

TRANSDUCER SENSOR....

........WELL BOTTOM---.. .. !f LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-38 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-38 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16236 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 14.342 13.990 4 DATUM DATE NGVD 29 3/6/07 STATIC GROUNDWATER TABLE ELEVATION (FT)0.99 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: CABLE CONNECTOR

............

40.00 14.342 13.990 below-0.35 14:29 TOC 13.00+ 34.853= 47.853 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?GROUND.SURFACE WATER TABLE CABLE ......................

PRESSURE TRANSDUCER SENSOR....

........WELL BOTTOM ...... .........xz--A I-=V=A A-q I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

TEST NAME: LOGGING INTERVAL: TEST START TIME: 13.990-- 13.00= 0.990 MW-38 20 14:30 LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-38 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION 1 Of 1 41.0017869.10 MW-38 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16236 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 14.342 13.990 4 DATUM DATE NGVD 29 3/8/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.50 CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?40.00 14.342 13.990 below-0.35 38.66 14:35 TOC 9.49+ 27.293= 36.783 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS v GROUND.SURFACE A I--I-A A WATER TABLE xz-.q=i CABLE .......................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.990-- 9.49-4.500 MW-38 20 14:35 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..........

TRANSDUCER SENSOR .......v WELL BOTTOM ..............

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-38 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-38 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 EWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 CIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 14.342 13.990 4 DATUM DATE NGVD 29 3/27/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)3.34 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 40.00 14.342 13.990 below-0.35 8:59 TOC 10.65+ 27.858= 38.508 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: I CTUAL DEPTH: HEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE WATER TABLE 41 A A z7-I 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?=i-CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.990-- 10.65= 3.340 MW-38 20 9:01 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ....TRANSDUCER SENSOR ...... ......WELL BOTTOM ...............

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING OTES: GZA IWELL ID :1 MW-38 TRANSDUCER INSTALLATION LOC~GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-38 1 of 1 41.0017869.10 I4 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 14.342 13.990 4 DATUM DATE NGVD 29 4/10/07 STATIC GROUNDWATER TABLE ELEVATION (FT)1.66 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

-DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 40.00 14.342 13.990 below-0.35 15:38 TOC 12.33+ 26.336= 38.666 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT Ir GROUND..: SURFACE WATER TABLE A I-A..A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: O~HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check a=.14-CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.990-- 12.33= 1.660 MW-38 20 15:59 FT M.S.L.FT FT M.S.L.MIN HRS 01 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ......WELL BOTTOM .................

v v v LEGEND: DIW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-38 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK IClient WELL ID MW-38 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 14.342 13.999 4 DATUM DATE NGVD 29 5/24/07 STATIC GROUNDWATER TABLE ELEVATION (FT)2.40 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: 40.00 14.342 13.999 below-0.34 10:33 TOC 11.59+ 26.969= 38.559 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check GROUND.: SURFACE WATER.TABLE CABLE ......................

PRESSUR.E

.......TRANSDUCER SENSOR ...... ......WELL BOTTOM ..............

I-mi.qJ C.)CP A A ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.990-- 11.59= 2.400 MW-38 20 10:33 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: 0l T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Well re-surveyed:

new elevation use to reference transducer.

GZA IWELL ID :1 MW-38 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-39 1 of 1-41.0017869.10 Indian Point mw MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5441 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)199.30 81.846 81.452 4 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)22.16 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?199.30 81.846 81.452 below-0.394 9:30 TOC 59.29+ 48.001= 107.291 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS*1* U*m GROUND/.SURFACE WATER TABLE A A~~1 0 A I)CABLE ........................

0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

81.452-- 59.29= 22.162 MW-39 20 9:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ..............

v WELL BOTTOM ........v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-39 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-39 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5441 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)199.30 81.864 79.992 4 DATUM DATE NGVD 29 9/22/06 29.71 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 199.30 81.864 79.992 below-1.872 8:16 GS 52.15+ 48.656= 100.806 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4.-..4 GROUND..SURFACE WATER TABLE A V A~~.1 C, A&HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

81.864-- 52.15= 29.714 MW-39 20 8:43 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

..................

TRANSDUCER SENSOR ..........

WELL BOTTOM ...IF LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/TOP OF CASING NOTES: GZA IWELL ID:1 MW-39 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-39 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5441 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)199.30 81.864 79.992 4 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)28.84 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 199.30 81.864 79.992 below-1.872 15:06 GS 53.02+ 48.190 101.210 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND." SURFACE WATER TABLE A-1 A A r C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..................

1*.1)11-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

81.864-- 53.02= 28.844 MW-39 20 15:10 V TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..............

WELL BOTTOM ........v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-39 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-39 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3414 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)199.30 81.864 79.992 4 DATUM DATE NGVD 29 1/16/07 STATIC GROUNDWATER TABLE ELEVATION (FT)29.44 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 199.30 81.864 79.992 below 1.872 8:54 GS 52.42+ 45.274= 97.694 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND...'

SURFACE WATER TABLE Bi J)If HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ............................

11 0.A ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

81.864-- 52.42=" 29.444 MW-39 20 855 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ...... ......WELL BOTTOM .......I'~i K 4~j v.. .........LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-39 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-40 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11980 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 74.987 74.758 4 DATUM DATE NGVD 29 6/29/06 STATIC GROUNDWATER TABLE ELEVATION (FT)59.06 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 200.00 74.987 74.758 below-0.229 10:31 casing 15.70+ 82.660= 98.360 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE A I-=-I A A F ,'-J C.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-CABLE ...........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

74.758-- 15.70=" 59.058 MW-40 20 10:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR..........

WELL BOTTOM ............

0 v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]I MW-40 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-40 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 20801 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 74.987 73.164 4 DATUM DATE NGVD 29 11/21/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)60.57 CABLE CONNECTOR

................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?200.00 74.987 73.164 below-1.823 13:56 GS 14.42+ 37.079-- 51.499 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS F GROUND, SURFACE WATER.TABLE A ac-I-;zz A-"5 C, A I.CABLE .........................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

74.987-- 14.42-- 60.567 MW-40 20 13:57 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM .............

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-40 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-40 1 of 1 41 .001 7869.10 Indian Point 1W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 20801 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 74.948 73.164 4 DATUM DATE NGVD 29 4/2/07 62.95 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -I: MEASURED CABLE LENGTH: 200.00 74.948 73.164 below-1.784 16:15 TOC 10.21+ 39.329= 49.539 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER.TABLE A=I-A A r 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

73.164-- 10.21= 62.954 MW-40 20 16:18.,.1 Ci-TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ............

WELL BOTTOM ...........

0 v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-40 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-41-42 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11948 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)64.00 54.87 54.13 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)33.17 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.....DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 42.00 54.87 54.13 below-0.74 11:55 TOC 20.96+ 16.017=. 36.977 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..'SURFACE WATER.TABLE A xz-A v A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ci-CABLE ...................

I ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

54.13-- 20.96= 33.17 MW-41-42 20 12:17 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..... .......WELL BOTTOM*""*'*

""*'*'****.L v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELLID :1 MW-41-42 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION.MW-41 -42 1 of 1 41.0017869.10 I Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11948 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)64.00 54.87 54.13 2 DATUM DATE NGVD 29 11/7/06 33.16 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR.............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?42.00 54.87 54.13 below-0.74 11:18 TOC 20.97+ 16.262= 37.232 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS____ F-..GROUND.." SURFACE WATER TABLE zz-A.A A-" C I-CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

54.13-- 20.97-= 33.16 MW-41-42 20 11:19 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR..........

WELL BOTTOM-...

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTHOF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-41-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-41-40 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11948 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)64.00 54.87 54.13 2 DATUM DATE NGVD 29 4/13/07 STATIC GROUNDWATER TABLE ELEVATION (FT)34.00 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 40.00 54.87 54.13 below-0.74 11:18 TOC 20.13+ 15.483= 35.613 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE A I-A A IF C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?-I)I CABLE .....................

1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

54.13-- 20.13= 34.00 MW-41-42 20 11:30 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR .............

WELL BOTTOM ..............LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-41-40 TRANSDUCER INSTALLATION LOCG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-41-40 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13911 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)64.00 54.87 54.13 2 DATUM DATE NGVD 29 5/4/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)33.19 CABLE CONNECTOR

.................

I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?40.00 54.87 54.13 below-0.74 11:04 TOC 20.94+ 15.077= 36.017 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE A I-A A xz---I.'C-)con CABLE ..................

"*0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

54.13-- 20.94=" 33.19 MW-41-42 20 11:05 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURFE.

TRANSDUCER SENSOR ...... .....WELL BOTTOM .............

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-41-40 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-41-64 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5359 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)64.00 54.87 54.13 1 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)30.70 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 64.00 54.87 54.13 below-0.74 11:53 TOC 23.43+ 26.154= 49.584 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m GROUND" SURFACE WATER.TABLE A-ic A A xz7 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .................

£4 C Oq a-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

54.13-- 23.43= 30.70 MW-41-64 20 12:11 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

v v WELL BOTTOM ...........

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-41-64 TRANSDUCER INSTALLATION LOCG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-41 -64 I of 1 41.0017869.10 m Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3414 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)64.00 54.87 54.13 1 DATUM DATE NGVD 29 8/11/06 27.77 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?64.00 54.87 54.13 below-0.74 10:24 TOC 26.36+ 0.025= 26.385 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r GROUND-SURFACE WATER.TABLE A a-1-I_4 A O~.1-i CABLE .............................

I0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

TEST NAME: LOGGING INTERVAL: TEST START TIME: 54.13-26.36= 27.77 MW-41-64 20 10:27 PRESSURE........

TRANSDUCER SENSOR.WELL BOTTOM ... .:..v'v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-41-64 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-41-64 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3414 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)64.00 54.87 54.13 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)29.51 CABLE CONNECTOR

........................

10-DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (÷ OR -): MEASURED CABLE LENGTH: 64.00 54.87 54.13 below-0.74 11:25 TOC 24.62+ 1.683= 26.303 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND..: SURFACE WATER TABLE A, L A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

10 C oq.'P C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

54.13-- 24.62= 29.51 MW-41-64 20 11:27 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR .........WELL BOTTOM .............

I V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-41-64 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-41-63 1 Of 1 41.0017869.10

.4 Indian Point I I mw MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16930 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)64.00 54.87 54.13 DATUM DATE NGVD 29 5/31/07 STATIC GROUNDWATER TABLE ELEVATION (FT)26.14 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR .): MEASURED CABLE LENGTH: 63.00 54.87 54.13 below-0.74 13:10 TOC 27.99+ 22.340" 50.330 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F 4 GROUND...'

SURFACE WATER TABLE I-;A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: xz--q HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I-CABLE .......................... ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

54.13-- 27.99= 26.14 MW-41-63 20 13:12 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR ..........

WELL BOTTOM...V It L J LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-41-63 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-42-51 440 NINTH AVENUE, 18th FLOOR Entergy I SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11978 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 69.71 69.42 2 DATUM DATE NGVD 29 6/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)43.04 CABLE CONNECTOR

................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 80.00 69.71 69.42 below-0.29 11:43 TOC 26.38+ 12.653" 39.033 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT r 4 GROUND" SURFACE WATER TABLE A-I-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check II CABLE ...................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.42-- 26.38= 43.04 MW-42-51 20 11:44 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURf .... ........TRANSDUCER SENSOR ..........

WELL BOTTOM .........LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-42-51 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO PROJECT LOCATION MW-42-51 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11978 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 69.71 69.42 2 DATUM DATE NGVD929 9/18/06 35.10 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?80.00 69.71 69.42 below-0.29 15:14 TOC 34.32+ 13.095= 47.415 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS___*GROUND..SURFACE WATER.TABLE A I-A.A z--/~qJ 0 I-CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.42-- 34.32= 35.10 MW-42-51 20 15:14 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR..

..................

TRANSDUCER SENSOR ..........

WELL BOTTOM .................

0 I F...........

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-42-51 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW42-51 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 ECIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11978 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 69.71 69.42 2 DATUM DATE NGVD 29 11/8/06 STATIC GROUNDWATER TABLE ELEVATION (FT)34.78 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

TEST NAME: LOGGING INTERVAL: TEST START TIME: 80.00 69.71 69.42 below-0.29 9:41 TOC 34.93+ 12.85= 47.78 69.71-- 34.93-= 34.78 MW42-51 20 9:48 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND, SURFACE WATER TABLE 0 I--A A C J I-le CABLE ...............

I.........

PRESSURE.TRANSDUCER SENSOR .....WELL BOTTOM ........v v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-42-51 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORM 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS IClient Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-42-51 1 oft1 41.0017869.10 Indian Point I I -=MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 80.00 MAKE MiniTroll GROUND ELEVATION (FT) 69.71 PSI CAPACITY 30 CASING ELEVATION (FT) 69.42 SERIAL NUMBER 11978 CASING DIAMETER (INCH) 2 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DATUM DATE NGVD 29 12/15/06 34.40 CABLE CONNECTOR*.................

.1 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 80.00 69.71 69.42 below-0.29 13:33 TOC 35.02+ 12.679=- 47.699 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND,: SURFACE WATER.TABLE Bic A m vz A~~1 0 A CI-I)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.42* 35.02" 34.40 MW-42-51 20 13:35 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.

..................

TRANSDUCER SENSOR ............

WELL BOTTOM-.................

.... H.4 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-42-51 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-42-49 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11978 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 69.71 69.42 2 DATUM DATE NGVD 29 4/3/07 STATIC GROUNDWATER TABLE ELEVATION (FT)34.75 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 49.00 69.71 69.42 below-0.29 9:22 TOC 34.67+ 13.781" 48.451 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND....

SURFACE WATER TABLE xz-j Am 0--I.I A C., HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.42-- 34.67= 34.75 MW-42-51 20 9:26~,0 A Ci 0 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR .........WELL BOTTOM** ...............

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-42-49 I TRANSDUCER.

iNSTALLA lION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS JClient Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-42-79 1 Of 1 41.0017869.10 Indian Point I I Nw MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11886 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 69.71 69.42 1 DATUM DATE NGVD 29 6/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)41.74 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 79.00 69.71 69.42 below-0.29 11:57 TOC 27.68+ 17.05= 44.73 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE A A A F'C.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CP-1-i.CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.42-- 27.6841.74 MW-42-79 20 11:58 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR.WELL BOTTOM.. ...........

T v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-42-79 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW42-79 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11886 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 69.71 69.42 1 DATUM DATE NGVD 29 11/8/06 STATIC GROUNDWATER TABLE ELEVATION (FT)36.14 GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning property)CABLE CONNECTOR

...........

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (*) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 79.00 69.71 69.42 below-0.29 9:23 GS 33.57 16.94 50.51 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+I FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS.4 GROUND, /SURFACE WATER TABLE A A Ir A.qJ C-)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?If CABLE ..............................

0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.71-- 33.57= 36.14 MW42-79 20 9:28 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR .............

.WELL BOTTOM .......T v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL IDI MW-42-79 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW42-78 1 of 1 41.0017869.10 4 Indian Point MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 80.00 MAKE MiniTroll GROUND ELEVATION (FT) 69.714 PSI CAPACITY 30 CASING ELEVATION (FT) 69.524 SERIAL NUMBER 11978 CASING DIAMETER (INCH) 1 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DATUM DATE NGVD 29 5/31/07 35.18 CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 78.00 69.71 69.52 below-0.19 15:10 TOC 34.34+ 35.184= 69.524 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND, SURFACE WATER TABLE B-:.A F HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..............................

1 I v.-0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.524-- 34.34= 35.184 MW42-78 20 15:12 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ............

WELL BOTTOM...........

I v'LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-42-78 TIRANSUULCER INNSALLAT[)N LUO GZA GEOENVIRONMENTAL OF NEW YORK client WELL ID MW42-78 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11948 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 69.714 69.524 1 DATUM DATE NGVD29 7/6/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER M. Britos ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)35.01 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?78.00 69.71 69.52 below-0.19 14:30 TOC 34.51 no+I FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND: SURFACE WATER .TABLE xz--A a-vI AL A 4--, J 0 CP CABLE ..............................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.524-- 34.51= 35.014 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW42-78 20 13:54 PRESSURE ...............

TRANSDUCER SENSOR ..... .......WELL BOTTOM .........r v'V L.LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-42-78 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-43-28 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11998 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)63.00 48.760 47.021 2 DATUM DATE NGVD 29 6/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)32.60 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 28.00 48.760 47.021 below-1.739 13:34 TOC 15.42+ 10.689= 26.109 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS~- U r GROUND-SURFACE WATER.TABLE A Bic-i A A v x--/-'-I 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?im CABLE ..................

.*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

48.021-- 15.42= 32.601 MW-43-28 20 13:37 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ..... ......WELL BOTTOM ............

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-43-28 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-43-28 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11998 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)63.00 48.760 47.021 2 DATUM DATE NGVD 29 11/7/06 32.57 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 28.00 48.760 47.021 below-1.739 13:58 TOC 15.45+ 10.238= 25.688 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.'SURFACE WATER TABLE A 3-4 AL A--t -, v ,4J C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?O-CABLE ...........

.......ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

48.021-- 15.45=- 32.571 MW-43-28 20 10:59 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR....

WELL BOTTOM ......v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-43-28 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-43-28 1 of 1 41.0017869.10 I Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11998 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)63.00 48.760 47.021 2 DATUM DATE NGVD 29 4/26/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)32.83 CABLE CONNECTOR

...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?28.00 48.760 47.021 below-1.739 8:45 TOC 15.19+ 11.711"- 26.901 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS*r U i GROUND..SURFACE A A A WATER TABLE.q Ci-CABLE ............................

1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

48.021-- 15.19"- 32.831 MW-43-28 20 8:55 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..........

V v WELL BOTTOM-..

..............

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-43-28 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-43-63 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14731 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)63.00 48.761 47.821 2 DATUM DATE NGVD 29 6/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)31.13 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 63.00 48.761 47.821 below-0.940 13:23 TOC 16.69+ -0.029= 16.661 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE WATER TABLE A Bi-A A If S-7-qJ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?0-CABLE .......................

"1£, ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

47.821-16.69= 31.131 MW-43-63 20 13:24 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR .........V BOTTOM .....................

............

a V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-43D TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-43-63 1 of 1 41.0017869.10 m Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14731 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)63.00 48.761 47.821 2 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)31.16 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 63.00 48.761 47.821 below-0.940 10:25 TOC 16.66+ -0.058" 16.602 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS U GROUND,!SURFACE WATER..TABLE A I-A-A A r HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

47.821-- 16.66"" 31.161 MW-43-63 20 10:25-'-I C.)I-=TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR.WELL BOTTOM~...

0~V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:I MW-43D TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK client WELL ID MW-43-63 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14731 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)63.00 48.761 47.821 2 DATUM DATE NGVD 29 3/13/07 31.17 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..... ........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR-): MEASURED CABLE LENGTH: 63.00 48.761 47.821 below-0.940 10:51 TOC 16.65+ 19.601= 36.251 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS____ II--'.GROUND: SURFACE WATER TABLE BA iv A-J C-IF A.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C-CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

47.821-- 16.65-" 31.171 MW-43-63 20 11:05 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

WELL BOTTOM .................

..v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer cable replaced, transducer re-calibrated and time re-set for DST.GZA IWELL ID :j MW-43-63 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-43-62 1 Of 1 41.0017869.10 Indian Point I I MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14731 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)63.00 48.761 47.821 2 DATUM DATE NGVD 29 4126/07 STATIC GROUNDWATER TABLE ELEVATION (FT)31.93 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR -): MEASURED CABLE LENGTH: 62.00 48.761 47.821 below-0.940 8:41 TOC 15.89+ 15.771=- 31.661 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE A A A IF~qJ C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-;.Cm CABLE ...................

I........

GIn ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

47.821-- 15.89=- 31.931 MW-43-63 20 8:41.9, TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E.

TRANSDUCER SENSOR ..........

WELL BOTTOM-..

..........

.... i....Hi v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA JWELL ID :] MW-43-62 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-43-62 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14731 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)63.00 48.761 47.821 2 DATUM DATE NGVD 29 4/26/07 31.04 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 63.00 48.761 47.821 below-0.940 15:40 TOC 16.78+ 21.002=- 37.782 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE WATER TABLE................

0. ý1 7 F'A&I-l.A A C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I I I CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

47.821-- 16.78-31.041 MW-43-62 20 15:43 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR ..........

WELL BOTTOM .........LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]I MW-43-62 TRANSDUCER INSTALLATION LOC3 GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-44-66 1 of 1 41.0017869.10 m Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 522 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)105.00 93.63 93.02 2 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)47.18 CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?66.00 93.63 93.02 below 0.61 8:30 TOC 45.84+ 11.281= 57.121 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS f U GROUND..SURFACE A-I-WATER TABLE xz-A.qJ C-)CABLE .......................

"0 A I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

93.02-- 45.84= 47.18 MW-44-66 20 8:30 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR.WELL BOTTOM ...........

0 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-44-66 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-44-66 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13993 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)105.00 93.63 93.02 2 DATUM DATE NGVD 29 6/22/06 STATIC GROUNDWATER TABLE ELEVATION (FT)33.67 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...........

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 66.00 93.63 93.02 below.0.61 14:24 TOC 59.35+ 2.302= 61.652 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-SURFACE WATER .TABLE A I--I-A A xz-C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I" C CABLE .............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

93.02-- 59.35"= 33.67 MW-44-66 20 14:25 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E.

..................

TRANSDUCER SENSOR ............

WELL BOTTOM -.. ...............

jy'v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-44-66 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-44-66 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13993 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)105.00 93.63 93.02 2 DATUM DATE NGVD 29 11/7/06 34.49 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 66.00 93.63 93.02 below 0.61 15:28 TOC 58.53+ 2.876= 61.406 FT FT M.S.L.FT M.S.L.FT FT HRS GROUND/.SURFACE WATER TABLE TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: z-7 FT FT FT A V.-q C.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE ......................... A*I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

93.02-- 58.53= 34.49 MW-44-66 20 15:29 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ..........

WELL BOTTOM ........10..... t LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-44-66 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-44-63 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13993 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)105.00 93.63 93.02 2 DATUM DATE NGVD 29 4/2/07 STATIC GROUNDWATER TABLE ELEVATION (FT)34.53 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 63.00 93.63 93.02 below 0.61 13:40 TOC 58.49+ 6.995= 65.485 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS.4 GROUND/SURFACE WATER.TABLE A I--1-A A F.qJ C-)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ....................

"1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

93.02-- 58.49=, 34.53 MW-44-66 20 13:44 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM .......0 v.............................................................

a..V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-44-63 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-44-63 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13993 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)105.00 93.52 93.02 2 DATUM DATE NGVD 29 6/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)33.08 GZA ENGINEER M. Britos ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

0 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 63.00 93.52 93.02 below 0.50 9:00 TOC 59.94+ 3.891-63.831 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND..SURFACE WATER TABLE lv-am 11 i A.C J)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ........................

A I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

93.02-- 59.94= 33.08 MW-44-67 20 9:36 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ...........

WELL BOTTOM.....

vr LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-44-63 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-44-102 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 416 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)102.00 93.52 92.96 1 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)25.14 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?102.00 93.52 92.96 below-0.56 10:50 TOC 67.82+ 33.109= 100.929 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/: SURFACE WATER .TABLE dI-A AL i C, C0 CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

92.96-- 67.82=- 25.14 MW-47-102 20 10:53 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

WELL BOTTOM .............

IV V............

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-44-102 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORS 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-44-1 02 1 Of I 41.0017869.10 I Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 416 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)102.00 93.52 92.96 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)23.13 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 102.00 93.52 92.96 below-0.56 15:33 TOC 69.83+ 30.866 100.696 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS U GROUND. :" SURFACE WATER TABLE 1-i.A-"a 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?v C A B LE .... .........................

A I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

92.96-- 69.8323.13 MW-47-102 20 15:35 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.

.................

TRANSDUCER SENSOR .....WELL BOTTOM ......H II V..'F, LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: MW-44-1 02 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-44-102 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11984 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)102.00 93.52 92.96 1 DATUM DATE NGVD 29 5/31/07 STATIC GROUNDWATER TABLE ELEVATION (FT)24.50 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 102.00 93.52 92.96 below-0.56 14:10 TOC 68.46+ 31.508=- 99.968 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r 3r 4 GROUND..: SURFACE WATER TABLE A I--:-A A F'HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I I, CABLE ....................

0<ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

92.96-- 68.46= 24.50 MW-47-102 20 14:11 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR..........

WELL BOTTOM .....v J .L LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-44-102 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-45-43 1 of 1 41.0017869.10 I I Indian Point 1=Iw MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6082 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)65.00 53.66 53.20 2 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)31.53 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 43.00 53.66 53.20 below-0.46 11:18 TOC 21.67+ 19.403" 41.073 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE................

0. ýý 7 A Rim-A&:I-P,~qJ C., HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .........

..............

"1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

53.20-- 21.67-" 31.53 MW-45-43 20 11:29 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR...........

TRANSDUCER SENSOR .............

WELL BOTTOM ......v V LEGEND: DIW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-45-43 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-45-43 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6082 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)65.00 53.66 53.20 2 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)30.87 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..... .............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 43.00 53.66 53.20 below-0.46 11:53 TOC 22.33+ 18.754= 41.084 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS T if r GROUND...'

SURFACE WATER TABLE Ri-F A A r HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I CABLE .............................

11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

53.20-- 22.33= 30.87 MW-45-43 20 11:54 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR .........WELL BOTTOM-.............

v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-45-43 TRANSDUCER INSTALLATION LOC~GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-45-42 1 of 1 41.0017869.10

.4 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6082 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)65.00 53.66 53.20 2 DATUM DATE NGVD 29 4/2/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)31.13 CABLE CONNECTOR

.........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?42.00 53.66 53.20 below-0.46 12:04 TOC 22.07+ 18.968=" 41.038 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4--.GROUND.SURFACE WATER TABLE A.A A.J)(Ci-CABLE .............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

53.20-- 22.07= 31.13 MW-45-43 20 12:06 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUFRE...............

TRANSDUCER SENSOR.WELL BOTTOM .......v~IV v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-45-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-45-67 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9411 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 53.66 53.10 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)30.39 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 67.00 53.66 53.10 b6low-0.56 11:14 TOC 22.71+ 27.727-= 50.437 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-SURFACE WATER.TABLE A A A--\-Il C., HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?,I-CABLE .............................. 4 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

53.10-- 22.71=- 30.39 MW-45-62 20 11:24 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR .............

WELL BO TTO M *-. .... ...........

ri H WV I v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA ]WELL ID ] MW-45-67 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-45-67 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9411 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 53.66 53.10 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)29.39 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -I: MEASURED CABLE LENGTH: 67.00 53.66 53.10 below-0.56 11:45 TOC 23.71+ 26.542-" 50.252 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS , U -4 GROUND..SURFACE WATER TABLE A.I-A A If HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

53.10-- 23.71= 29.39 MW-45-62 20 11:48-qJ C-,.--TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR..........

TRANSDUCER SENSOR ..... .......WELL BOTTOM ..............

5 V"°'°***'.*Jk LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID 1 MW-45-67 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-45-61 1 Of 1 41.0017869.10 Indian Point I I MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16104 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 53.662 53.217 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)26.08 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 61.00 53.662 53.217 below-0.45 13:31 TOC 27.120+ 22.845= 49.965 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT r U p GROUND,.SURFACE WATER TABLE A.-.A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I=CABLE ........................ ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

53.196-- 27.12= 26.076 MW-45-61 20 13:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: FT M.S.L.FT FT M.S.L.MIN HRS PRESSURE..........

TRANSDUCER SENSOR ............

WELL BOTTOM .............

H j,,I Li'v'V__LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]1 MW-45-61 TRANSDJUCER INSTALLATION LO(C GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-45-61 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16.930 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 53.662 53:217 1 DATUM DATE NGVD 29 6/21/07 STATIC GROUNDWATER TABLE ELEVATION (FT)26.45 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 61.00 53.662 53.217 below-0.45 9:45 TOC 26.770+ 34.404-" 61.174 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS a .GROUND-SURFACE WATER.TABLE Bi.A A I 0-'-I 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I" CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

53.217-- 26.77= 26.447 MW-45-61 20 9:48 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR....

........WELL BOTTOM""---...

ýF v v........ -LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: MW-45-61 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-46 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 2460 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.08 16.97 4 DATUM DATE NGVD 29 6/14/06 STATIC GROUNDWATER TABLE ELEVATION (FT)13.39 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.....DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 30.00 18.08 16.97 below-1.11 14:38 TOC 3.58+ 14.410-- 17.990 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS F-4--, 4 GROUND..SURFACE A Ri-A A WATER TARLE zz-j C.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CP 1-i-ctl CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.97-- 3.58-13.39 MW-46 20 13:47 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR...........

TRANSDUCER SENSOR ......WELL BOTTOM .......v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-46 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-46 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 2460 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.08 16.97 4 DATUM DATE NGVD 29 7/18/06 STATIC GROUNDWATER TABLE ELEVATION (Fr)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)13.23 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 30.00 18.08 16.97 below-1.11 10:30 TOC 3.74+ 14.752-- 18.492 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND: SURFACE WATER.TABLE A A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I CABLE ........................

A Cim 9 0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.97-- 3.74-= 13.23 MW-46 20 10:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ...... ......WELL BOTTOM ........I F LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID : MW-46 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-46 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6095 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.08 16.97 4 DATUM DATE NGVD 29 7/26/06 STATIC GROUNDWATER TABLE ELEVATION (FT)12.88 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...........

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 30.00 18.08 16.97 below-1.11 10:05 TOC 4.09+ 14.558= 18.648 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE A k A A-I-r WATER TABLE................

.ýý 7.qJ C)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?On I-..-11::ý, CABLE ..................

........ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.97-- 4.09-- 12.88 MW-46 20 10:07 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR. .................

TRANSDUCER SENSOR ......WELL BOTTOM--'--....

V"..........

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-46 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK client WELL ID MW-46 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6095 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.08 16.97 4 DATUM DATE NGVD 29 11/6/06 13.30 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

....................

N W DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 30.00 18.08 16.97-1.11 11:49 TOC 3.67+ 14.53" 18.20 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS/GROUND.SURFACE WATER TABLE A-I-A A-'-I HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?F4-CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.97-- 3.67= 13.30 MW-46 20 11:53 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...... ......WELL BOTTOM ........v'V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-46 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-46 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4424 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.08 16.97 4 DATUM DATE NGVD 29 3/28/07 STATIC GROUNDWATER TABLE ELEVATION (FT)14.47 GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 30.00 18.08 16.97-1.11 13:27 TOC 2.50+ 24.65= 27.15 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-SURFACE WATER TABLE A-I-A A r HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..................

........ 0 C I-C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.97-- 2.50= 14.47 MW-46 20 13:35 TEST NAMe: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR.WELL BOTTOM*....

...0 V.......................................

...........

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Reference elevation inadvertently set to 14.27' instead of 14.47'. Test data should be adjusted by +0.2.GZA IWELL ID :1 MW-46 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-46 1 of 1 41.0017869.10 I Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4424 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)30.00 18.08 16.97 4 DATUM DATE NGVD 29 5/23/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)14.38 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 30.00 18.08 16.97-1.11 14:02 TOC 2.59 6.50 9.09 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+I HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check GROUND-.'SURFACE WATER TABLE CABLE .....................

PRESSURE TRANSDUCER SENSOR....

WELL BOTTOM .......ac-11-4 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.97-- 2.59-14.38 MW-46 20 14:04 A A FT M.S.L.FT FT M.S.L.MIN HRS~~1 C, 0-TEST NAME: LOGGING INTERVAL: TEST START TIME: LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]: MW-46 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-47-57 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 522 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 70.32 69.81 2 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)26.50 CABLE CONNECTOR

.........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 57.00 70.32 69.81 below-0.51 8:59 TOC 43.31+ 11.362= 54.672 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/" SURFACE WATER.TABLE 4.A==I-A.A&.4.J C..HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?.I-CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.81-- 43.31= 26.50 MW-47-57 20 9:05 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR ..................

TRANSDUCER SENSOR ............

WELL BOTTOM ..................

0'V LEGEND: DIW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD , ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-47-57 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-47-57 1 of 1 41.0017869.10 1 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15843 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 70.32 69.81 2 DATUM DATE NGVD 29 11/2/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)27.32 CABLE CONNECTOR

........................

-DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?57.00 70.32 69.81 below-0.51 11:09 GS 43.00+ 6.04= 49.04 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/SURFACE WATER TABLE A I-=A A--\O~0-C A B L E ................

...... ...... ." ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.32-- 43.00=" 27.32 MW47-57 20 11:13 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR..........

WELL BOTTOM...0 V r'V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-47-57 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-47-57 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15843 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 70.32 69.81 2 DATUM DATE NGVD 29 2/21/07 20.75 STATIC GROUNDWATER TABLE ELEVATION (FT) *GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 57.00 70.32 69.81 below-0.51 11:36 TOC 49.06+ 0.90= 49.96 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND,.SURFACE WATER TABLE.A I-.f-I-A A.Y.0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-i CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.81-49.06= 20.75 MW47-57 20 11:42 TEST NAME;LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR .......WELL BOTTOM ...................

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Transducer not completely submerged under water. Transducer readings and referenced water elevation may not be accurate.GZA IWELL ID :1 MW-47-57 TRANSDUCER INSTALLATION LOG-GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-47-56 1 of1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15843 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 70.32 69.81 2 DATUM DATE NGVD29 4/3/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)25.94 CABLE CONNECTOR

.........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?56.00 70.32 69.80 below-0.52 11:23 TOC 43.86+ 5.58"- 49.44 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS v 4 GROUND.." SURFACE A: A A WATER TABLE xz--~q!J 0 O-CABLE ..................

I.........

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.80-- 43.86=- 25.94 MW47-57 20 11:26 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

.................

TRANSDUCER SENSOR ..........

0 V WELL BOTTOM .................

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-47-56 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-47-56 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15843 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 70.32 69.81 2 DATUM DATE NGVD 29 5/18/07 STATIC GROUNDWATER TABLE ELEVATION (FT)22.92 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 56.00 70.32 69.80 below-0.52 10:28 TOC 46.88+ 3.74= 50.62 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE A-I-I-A A WATER TABLE................

0. ýý 7 o,.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-i CABLE .....................

11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.80-46.88= 22.92 MW47-57 20 10:28 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUFRý.

..................

TRANSDUCER SENSOR .....WELL BOTTOM....

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-47-56 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-47-80 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4424 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 70.32 69.62 1 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S.Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)26.76 CABLE CONNECTOR

.....DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 80.00 70.32 69.62 below-0.70 8:55 TOC 42.98+ 7.595= 50.575 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT m GROUND-: SURFACE WATER TABLE A Ri-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:-..'0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check On CABLE .........................

m ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.74-- 42.98-26.76 MW-47-80 20 8:57 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.

.............

TRANSDUCER SENSOR.WELL BOTTOM ................

0 v v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-47-80 TRANSDUCER INSTALLATION LOc GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-47-80 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9445 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)80.00 70.32 69.742 1 DATUM DATE NGVD 29 5/31/06 22.21 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 80.00 70.32 69.742 below-0.58 10:21 TOC 47.53+ 2.899= 50.429 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT GROUND..SURFACE WATER .TABLE A.I-f-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH::.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CP CABLE .....................

'*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.742-- 47.53" 22.212 MW-47-80 20 10:21 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE....

TRANSDUCER SENSOR ........WELL BOTTOM -... .............

1.v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: MW-47-80 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO PROJECT LOCATION MW-48-23 1 oft1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3048 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.394 14.762 2 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)2.46 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (÷) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 23.00 15.394 14.762 below-0.63 14:31 TOC 12.30+ 9.437= 21.737 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND..: SURFACE WATER.TABLE A I-'--I-A-Il 0 A!)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ci-CABLE ............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.762-- 12.30-- 2.462 MW-48-23 20 14:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...........

WELL BOTTOM...

.'V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-48-23 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-48-23 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3048 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.394 14.762 2 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)2.55 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR-): MEASURED CABLE LENGTH: 23.00 15.394 14.762 below-0.63 13:40 GS 12.84+ 9.609"" 22.449 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L-FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS I 4 GROUND-:" SURFACE WATER.TABLE.A V Bi AA.1 C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-CABLE .............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.394-- 12.84"- 2.554 MW-48-23 20 13:42 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

WELL BOTTOM ..............

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-48-23 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-48-23 1 of 1 1 _ _ _I I 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3048 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.394 14.762 2 DATUM DATE NGVD 29 4/10/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)0.87 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?23.00 15.394 14.762 below-0.63 15:54 TOC 13.89+ 7.713= 21.602 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS F GROUND-SURFACE WATER TABLE ac-llFýA A-u1 0 Ci-CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.762-- 13.89= 0.873 MW-48-23 20 15:59 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ...... ......WELL BOTTOM ............

fi~oI v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID] MW-48-23 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-48-23 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3048 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.389 14.759 2 DATUM DATE NGVD 29 5/24/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MFASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)0.25 CABLE CONNECTOR

.........

.........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 23.00 15.389 14.759 below-0.63 15:02 TOC 14.51+ 7.713= 22.223 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND" SURFACE WATER.TABLE a-I A A C)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I¢CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.762-- 14.51= 0.252 MW-48-23 20 15:03 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

WELL BOTTOM-..

...........

0 v It LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-48-23 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS I Entergy I Indian Point Enerav Center WELL 10 SHEET FILE NO.PROJECT LOCATION MW-48-38 1 of 1 41.0017869.10 4 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.394 14.765 1 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.08 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 38.00 15.394 14.765 below-0.629 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 14:17 TOC 12.69+ 23.656= 36.346 FT FT M.S.L.FT M.S,L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-'SURFACE WATER.TABLE A-I-A r A xz---"a C, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ci-CABLE ..............................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.765-- 12.692.075 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-48-38 20 14:24 PRESSURE.TRANSDUCER SENSOR .......WELL BOTTOM...c V T T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Surveyed casing elevation in error. Actual casing elevation at time of reference was 15.069 ft msl.Water elevation referenced to surveyed casing elevation.

Actual water elevation was 2.379 ft msa.GZA IWELL ID :1 MW-48-38 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-48-38 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.394 14.765 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.58 CABLE CONNECTOR

.....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?38.00 15.394 14.765 below-0.629 13:44 GS 12.81+ 24.208= 37.018 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r a GROUND.SURFACE WATER .TABLE A-I A A.xz---Il£I CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.394-- 12.81= 2.584 MW-48-38 20 13:45 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR ..........

WELL BOTTOM-..

.............

I V 11- ..LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Surveyed casing elevation in error. Actual casing elevation at time of reference was 15.069 ft msl.GZA IWELL ID :1 MW-48-38 TRANSDUCER INSTALLATION -LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-48-38 I oft1 41.0017869.10 Indian Point.I MW MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.394 14.765 1 DATUM DATE NGVD 29 1/19/07 1.57 STATIC GROUNDWATER TABLE ELEVATION (FT) *GZA ENGINEER S.Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

IN'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?38.00 15.394* 14.765 below-0.629 13:31** TOC 13.20+ 23.062"- 36.262 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS I GROUND.;" SURFACE WATER TABLE A F4--I A A z-/-ý1 0 90 I:-CABLE ......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.765-- 13.20-" 1.565 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-48-38 10 13:34 PRESSURE TRANSDUCER SENSOR..........

WELL BOTTOM---...............

H Li F LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Surveyed casing elevation in error. Actual casing elevation at time of reference was 15.069 ft msl.Water elevation referenced to surveyed casing elevation.

Actual water elevation was 1.869 ft msl.GZA IWELL ID]: MW-48-38 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-48-38 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.394 14.765 DATUM DATE NGVD29 2/3/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)-33.42 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?38.00 15.394 14.765 below-0.629 11:30 TOC 14.60+ 22.411=- 37.011 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r GROUND..SURFACE WATER TABLE A I-A A C CABLE ....................

00-01-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

48.021-- 14.60= 33.421 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-48-38 20 11:31 PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM .......LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Surveyed casing elevation in error. Actual casing elevation at time of reference was 15.069 ft msl.Water elevation referenced in error. Actual water elevation was 0.469 ft msl.GZA IWELL ID I MW-48-38 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-48-38 1 Of 1 41.0017869.10 Indian Point 1W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.394 14.765 1 DATUM DATE NGVD 29 2/20/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.08 CABLE CONNECTOR------

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?38.00 15.394* 14.765 below-0.629 14:19 TOC 12.69+ 24.579= 37.269 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS./GROUND/" SURFACE WATER TABLE ai.A A lv-CABLE .............................

1!q V 0.J ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

- 14.765-- 12.69=: 2.075 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-48-38 20 14:21 PRESSURE ...................

TRANSDUCER SENSOR..........

WELL BOTTOM .................

v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Surveyed casing elevation in error. Actual casing elevation at time of reference was 15.069 ft msl.Water elevation referenced to surveyed casing elevation.

Actual water elevation was 2.379 ft msl.GZA IWELL ID :1 MW-48-38 TRANSDUCER INSTALLATION LOCH GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-48-38 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.394 14.765 1 DATUM DATE NGVD29 3/6/07 STATIC GROUNDWATER TABLE ELEVATION (FT)-0.16 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?38.00* 15.394* 14.765 below-0.629 14:16 GS 15.55+ 22.018= 37.568 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE a A A z-7 C.J I-C CABLE .....................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.394-15.55= -0.156 MW-48-38 20 14:18 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

WELL BOTTOM 0 1 V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Surveyed casing elevation in error. Actual casing elevation at time of reference was 15.069 ft msl.GZA IWELL ID :1 MW-48-38 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-48-37 1 of 1 41.0017869.10 Indian Point I I NW MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3078 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)40.00 15.387 15.189 DATUM DATE NGVD 29 5/25/07 STATIC GROUNDWATER TABLE ELEVATION (FT)0.16 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 37.00 15.387 15.189 below-0.198 14:16 TOC 15.03+ 22.018= 37.048 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE WATER.TABLE A A.A zz-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ........................

!V~qJ C.)m.I-F-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.189-- 15.03"- 0.159 MW-48-38 20 11:50 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ............

WELL BOTTOM ..........

I j v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-48-37 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-49-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5395 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)26.00 14.65 14.19 2 DATUM DATE NGVD 29 6/14/06 STATIC GROUNDWATER TABLE ELEVATION (FT)1.08 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR**...

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR -): MEASURED CABLE LENGTH: 26.00 14.65 14.19 below-0.46 22.80 12:37 TOC 13.11+ 9.687-22.797 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND."'SURFACE WATER TABLE CABLE .....................

A~~1 C.)'7 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?A I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.19-- 13.11"- 1.08 MW-49-26 20 12:42 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.

..............

TRANSDUCER SENSOR..........

WELL BOTTOM--""'

D i LEGEND: DTW -DEPTH TO WATER OTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-49-26 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-49-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5395 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)26.00 14.65 14.19 2 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.73 CABLE CONNECTOR

......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?26.00 14.65 14.19 below-0.46 13:21 TOC 11.46+ 12.190= 23.650 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS f 0-*..GROUND..SURFACE WATER.TABLE A A..A O~r I-C, CABLE ..............................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.19-- 11.46-2.73 MW-49-26 20 13:24 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURFE.

TRANSDUCER SENSOR .............

WELL BOTTOM .......0ýv LEGEND: DI'W -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-49-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-49-26 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER GZA ENGINEER In-Situ MiniTroll 30 5395 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)26.00 14.65 14.19 2 DATUM DATE NGVD 29 12/15/06 1.78 STATIC GROUNDWATER TABLE ELEVATION (FT)A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

---*...............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?26.00 14.65 14.19 below-0.46 10:27 TOC 12.41+ 23.079= 35.489 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS If___ a 4 GROUND, SURFACE ,A WATER TABLE A~qJ C-)CABLE ......................

[0A I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.19-- 12.41"- 1.78 MW-49-26 20 10:31 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR_...............

TRANSDUCER Hý....... w1 v SENSOR ............

WELL BOTTOM ..........

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-49-26 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS[Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-49-26 1 of 1 41.0017869.10 Indian Point 0 MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5395 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)26.00 14.650 14.191 2 DATUM DATE NGVD 29 2/16/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)0.19 CABLE CONNECTOR

.......................

-DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 26.00 14.650 14.191 below-0.46 13:27 TOC 14.00+ 33.481= 47.481 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4-, GROUND.: SURFACE WATER.TABLE A I--F A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: r HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check r 11-CABLE .........

..................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.19-- 14.00= 0.19 MW-49-26 20 13:28 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR............

WELL BOTTOM".........

I V v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-49-26 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-49-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET i of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5395 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)26.00 14.650 14.191 2 DATUM DATE NGVD 29 3/8/07 STATIC GROUNDWATER TABLE ELEVATION (Fr)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)0.32 CABLE CONNECTOR

......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?26.00 14.650 14.191 below-0.46 24.22 13:14 TOC 13.87+ 17.407= 31.277 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r_________

U -GROUND.SURFACE WATER TABLE A I--I-A A z-7-qJ 0 I-dt=CABLE .....................

........ *ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.19-- 13.87-- 0.32 MW-49-26 20 13:16 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..... .....WELL BOTTOM ...............

....v LEGEND: D0W -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-49-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-49-26 1 of 1 41.0017869.10

/Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5395 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)26.00 14.650 14.191 2 DATUM DATE NGVD 29 3/13/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)1.25 CABLE CONNECTOR

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 26.00 14.650 14.191 below-0.46 10:00 TOC 12.94+ 10.458= 23.398 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS v 4 GROUND" SURFACE A I-=-I A A WATER TABLE J)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?(I-CABLE ...............

I.........

"1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.19-- 12.94= 1.25 MW-49-26 20 10:02 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUF.E...............

TRANSDUCER SENSOR ...... ......rq Iii H~~Li V IV v WELL BOTTOM-..

..............

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer calibrated and time re-set for DST.GZA IWELLID :1 MW-49-26 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-49-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11885 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)26.00 14.650 14.191 2 DATUM DATE NGVD 29 4/11/07 STATIC GROUNDWATER TABLE ELEVATION (FT)1.57 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.....DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 26.00 14.650 14.191 below-0.46 8:54 TOC 12.62+ 11.700= 24.320 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m 4 GROUND: SURFACE WATER .TABLE A I--"a C.A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ci-CABLE ...............

I.........

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.19-- 12.62-= 1.57 MW-49-26 20 8:56 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E...............

TRANSDUCER SENSOR .............

WELL BOTTOM ......LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-49-26

,TRANSDUCER INSTALLATION LOG-GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-49-42 1 oft1 41.0017869.10 I m Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15849 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)66.00 14.65 14.13 2 DATUM DATE NGVD 29 6/14/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)1.08 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 42.00 14.65 14.13 below-0.47 12:02 TOC 13.05+ 26.316-" 39.37 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER.TABLE i.A.A lv-~,.1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?im I-.-CABLE ........................

C: C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.13-- 13.05= 1.08 MW-49-42 20 12:07 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUFR ..............

TRANSDUCER SENSOR ......WELL BOTTOM .................

I v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-49-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW49-42 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15849 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)66.00 14.65 14.13 2 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)2.82 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER -ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (÷) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 66.00 14.65 14.13 below-0.52 13:23 GS 11.83+ 28.33= 40.16 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS I HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?GROUND-SURFACE WATER .TABLE CABLE .....................

PRESSUR. ..................

TRANSDUCER SENSOR .....WELL BOTTOM ............

A F A 1-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.65-- 11.83= 2.82 MW49-42 20 13:28 TEST NAME: LOGGING INTERVAL: TEST START TIME: LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-49-42 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW49-42 1 oft1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5395 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)66.00 14.650 14.223 2 DATUM DATE NGVD 29 5/30/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)0.91 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 66.00 14.650 14.223 below-0.43 15:21 TOC 13.31+ 12.745= 26.055 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS U GROUND.SURFACE WATER TABLE A I-4 A F xz-C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

.1)im ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.223-- 13.31= 0.913 MW49-42 20 15:22 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ........WELL BOTTOM ...........

V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID : MW-49-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-49-66 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11331 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)66.00 14.65 14.37 1 DATUM DATE NGVD 29 6/14/06 1.60 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 66.00 14.65 14.37 below-0.28 12:16 TOC 12.77+ 37.19"- 49.96 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS¶ U r GROUND..'SURFACE WATER TABLE A I-A-q A r HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?go-CABLE ......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.37-- 12.77-- 1.60 MW-49-66 20 12:20 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.

.................

TRANSDUCER SENSOR ........WELL BOTTOM ............. l LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-49-66 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-49-66 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11331 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)66.00 14.65 14.37 1 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.78 CABLE CONNECTOR

....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 66.00 14.65 14.37 below-0.28 13:30 TOC 11.59+ 38.43= 50.02 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE WATER TABLE A U-A A-5-, v--".40 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?O-CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.37-- 11.59= 2.78 MW-49-66 20 13:31 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..........

TRANSDUCER SENSOR ........WELL BOTTOM .............

z", v Yr LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-49-66 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-49-65 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15847 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)66.00 14.650 14.457 1 DATUM DATE NGVD 29 5/30/07 STATIC GROUNDWATER TABLE ELEVATION (FT)1.18 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 66.00 14.650 14.457 below-0.19 15:03 TOC 13.28+ 12.70" 25.98 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS_________________

-* -, GROUND.SURFACE WATER TABLE A I--I-A A F xz-J 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Ci-CABLE ..........................

I10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.457-- 13.28= 1.177 MW-49-66 20 15:04 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.....

TRANSDUCER SENSOR ...... ......WELL BOTTOM ..............

n..... ... I v v'V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-49-65 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-49-65 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15847 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)66.00 14.650 14.457 1 DATUM DATE NGVD 29 6/25/07 0.78 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 65.50 14.650 14.457 below-0.19 14:34 TOC 13.68+ 12.24= 25.92 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE A I-A A r WATER TABLE................

0. ýS 7 C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I, a CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.457-- 13.68= 0.777 MW-49-65 20 14:39 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ...... ......WELL BOTTOM .........LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-49-65 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-50-42 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 300 5782 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.30 2 DATUM DATE NGVD 29 6/14/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.72 CABLE CONNECTOR

.................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 42.00 14.92 14.30 below-0.62 8:15 TOC 5.58+ 35.706= 41.286 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F GROUND.*SURFACE WATER TABLE A I-.A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: FHEORETICAL CABLE LENGTH:.1)C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check cio CABLE .............................

C 4£ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.30-- 5.58= 8.72 MW-50-42 20 8:24 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.

.................

TRANSDUCER SENSOR ..........

WELL BOTTOM ..........

LEGEND: PTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING qOTES:* Water level referenced to casing elevation in error. Actual casing elevation was 14.43 ft msl. Actual water elevation was 8.85.GZA IVWELL ID ] MW-50-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-50-42 1 of 1 41.0017869.10

-41 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5533 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.43 2 DATUM DATE NGVD 29 6/22/06 STATIC GROUNDWATER TABLE ELEVATION (FT)9.06 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 42.00 14.92 14.43 below-0.49 10:31 TOC 5.37+ 28.933= 34.303 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.": SURFACE WATER.TABLE A I--I-A A Q~HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Ci-CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.43-- 5.37"" 9.06 MW-50-42 20 10:34 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ......WELL BOTTOM ..............

0 v I'LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IVWELL ID ] MW-50-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-50-42 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5386 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.43 2 DATUM DATE NGVD 29 6/30/06 STATIC GROUNDWATER TABLE ELEVATION (FT)9.03 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 42.00 14.92 14.43 below-0.49 9:05 TOC 5.40+ 28.933= 34.333 CABLE CONNECTOR

................

FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4-, 4 GROUND..SURFACE WATER .TABLE A-I-A&.TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: zz-DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check.J I.C CABLE .............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.43-5.40=" 9.03 MW-50-42 20 9:08 FT M.S.L.FT FT M.S.L.MIN HRS 9.TEST NAME;LOGGING INTERVAL: TEST START TIME: PRESSUR.E.

.........

......TRANSDUCER SENSOR .....WELL BOTTOM....

........v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL D:1 MW-50-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO: PROJECT LOCATION MW-50-42 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5386 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.91 14.43 2 DATUM DATE NGVD 29 10/4/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.40 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?42.00 14.91 14.43 below-0.48 11:27 GS 5.40+ 32.690-= 38.090 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS F 4 GROUND.-SURFACE.A A WATER TABLE J)Ci-CABLE .......................

1*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.91-- 7.51= 7.40 MW-50-42 20 11:29 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ....WELL BOTTOM .... .......* H al V..........

, V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-50-42 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-50-42 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5386 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.91 14.43 2 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)5.34 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: CABLE CONNECTOR

...........

42.00 14.91 14.43 below-0.48 9:53 TOC 9.09+ 30.606= 39.696 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS III GROUND.: SURFACE WATER.TABLE A Bic I--I A A-"5 C-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Ci-.1-i CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.43-- 9.09= 5.34 MW-50-42 20 9:54 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR...............

TRANSDUCER SENSOR ............

'77 v WELL BOTTOM....

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-50-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-50-42 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5386 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.91 14.43 2 DATUM DATE NGVD 29 12/13/06 STATIC GROUNDWATER TABLE ELEVATION (FT)5.07 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 42.00 14.91 14.43 below-0.48 14:32 TOC 9.36+ 30.233= 39.593 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.SL.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.:" SURFACE WATER.TABLE A m A A v vz-q4 C j)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CID CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.43-- 9.36"- 5.07 MW-50-42 20 14:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR....

WELL BOTTOM..........

PJ]v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-50-42 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-50-42 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5386 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.33 2 DATUM DATE NGVD 29 3/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)5.68 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (÷) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 42.00 14.92 14.33 below-0.59 16:51 TOC 8.65+ 32.333= 40.983 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS CABLE CONNECTOR

.... .........HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?GROUND: SURFACE WATER TABLE CABLE .....................

PRESSURE.........

TRANSDUCER SENSOR .....WELL BOTTOM .......a-A I.qJ C-)C0 A 11=1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.33-- 8.65= 5.68 MW-50-42 20 16:53 TEST NAME: LOGGING INTERVAL: TEST START TIME: 0 F'V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Water level referenced to casing elevation in error. Actual casing elevation was 14.43 ft msl. Actual water elevation was 5.78.GZA IWELL ID :1 MW-50-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK client WELL ID MW-50-42 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5386 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.42 2 DATUM DATE NGVD 29 5/9/07 6.60 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 42.00 14.92 14.42 below-0.50 12:23 TOC 7.82+ 33.255= 41.075 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT v 1* U ~GROUND/" SURFACE WATER TABLE A 11,-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: xz--ý1 0.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.42-- 7.82= 6.60 MW-50-42 20 12:24 FT M.S.L FT FT M.S.L MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURJ ..................

TRANSDUCER SENSOR ..........

WELL BOTTOM ........'Yr LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-50-42 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-50-67 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 8264 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.61 DATUM DATE NGVD 29 6/14/06 STATIC GROUNDWATER TABLE ELEVATION (FT)4.12 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..........

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING FLEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 67.00 14.92 14.61 below-0.31 8:29 TOC 10.49+ 14.435= 24.925 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUNDi: SURFACE WATER.TABLE Bi I-=A A r HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Ci-CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.61-- 10.49-- 4.12 MW-50-67 20 11:48 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..........

WELL BOTTOM .....0, v.......,.,..LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-50-67 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-50-67 1 Of 1 41.0017869.10 Im&Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 8264 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.61 1 DATUM DATE NGVD 29 6/22/06 STATIC GROUNDWATER TABLE ELEVATION (FT)5.43 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?67.00 14.92 14.61 below-0.31 10:40 TOC 9.18+ 15.637"" 24.817 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r.U--,.GROUND-SURFACE WATER TABLE A-I-AýA U-l CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.61-- 9.18-5.43 MW-50-67 20 10:42 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR.......

WELL BOTTOM .............

v V."" ..LEGEND: D1W -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-50-67 S TRANSDUCER INSTALLATION LOG GZA G9OENVIRONMENTAL OF NEW YORK Client WELL ID MW-50-67 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 8264 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.61 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)3.53 CABLE CONNECTOR

.............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?67.00 14.92 14.61 below-0.31 9:58 TOC 11.08+ 14.026"- 25.106 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS I F GROUND.SURFACE WATER .TABLE CABLE .................

.................

TRANSDUCER SENSOR ..........

WELL BOTTOM-...

.....A 0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.61-- 11.08= 3.53 MW-50-67 20 9:59 TEST NAME: LOGGING INTERVAL: TEST START TIME: LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-50-67 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-50-66 1 of 1 41.0017869.10

.4-- m Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3302 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.61 1 DATUM DATE NGVD 29 5/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.03 CABLE CONNECTOR

...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?66.00 14.92 14.61 below-0.31 13:59 TOC 10.58+ 40.518-51.098 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS v___ 4 GROUND..SURFACE A ll-ýA A WATER TABLE xz-0 J)C CABLE .......................

I.-.ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.614-- 10.58= 4.034 MW-50-66 20 14:00 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER V v SENSOR............

WELL BOTTOM ..............

..A.V LEGEND: DIW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-50-66 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-50-66 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3302 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.61 1 DATUM DATE NGVD 29 6/11/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)3.76 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 65.75 14.92 14.61 below-0.31 13:30 TOC 10.85+ 15.464= 26.314 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS___ U , GROUND.SURFACE WATER TABLE A A.xz-v 114-~~1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.614-- 10.85= 3.764 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-50-66 20 13:40 PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM........

T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-50-66 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-50-66 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3302 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)67.00 14.92 14.61 1 DATUM DATE NGVD 29 6/12/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)5.57 CABLE CONNECTOR

...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 65.75 14.92 14.61 below-0.31 9:43 TOC 9.04+ 56.155= 65.195 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HIRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND." SURFACE WATER.TABLE A-1-4 A A If-Il C-)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?.1-CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.614-- 9.04= 5.574 MW-50-66 20 9:52 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR.WELL BOTTOM V v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-50-66 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-51 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11840 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)198.80 69.62 69.34 4 DATUM DATE NGVD 29 6/30/06 STATIC GROUNDWATER TABLE ELEVATION (FT)45.61 GZA ENGINEER A. Hough/S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 198.80 69.62 69.34 below-0.28 10:53 TOC 23.73+ 23.18= 46.91 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER.TABLE A A A xz-C-)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?S.-CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.34-- 23.7345.61 MW-51 20 10:55 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ....... ...WELL BOTTOM .....04: LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID I MW-51 TRANSDUCER INSTALLATION LOCG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID MW-51 SHEET I of 1 FILE NO. 41.0017869.10 PROJECT LOCATION Indian Point I, MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15147 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)198.80 69.62 69.34 4 DATUM DATE NGVD 29 9/29/06 STATIC GROUNDWATER TABLE ELEVATION (FT)41.95 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 198.80 69.62 69.34 below-0.28 15:09 TOC 27.39+ 23.19= 50.58 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..-SURFACE WATER TABLE A~~1 U I HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..............

A CI ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.34-- 27.39-41.95 MW-51 20 15:11 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR .........WELL BOTTOM ......LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA [WELL ID :1 MW-51 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-51 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15147 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)198.80 69.62 69.34 4 DATUM DATE NGVD 29 11/13/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)44.24 CABLE CONNECTOR

....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 198.80 69.62 69.34 below-0.28 10:03 GS 25.38+ 27.17= 52.55 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE aim A.A A r~~1 C)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I CABLE ........................ "lb ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.62-- 25.38= 44.24 MW-51 20 10:03 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR ..........

WELL BOTTOM .........a vr V I. _LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]I MW-51 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCA'FION_

MW-51 1 of 1 41.0017869.10 I Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)198.80 69.62 67.72 4 DATUM DATE NGVD 29 2/27/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)41.90 CABLE CONNECTOR

.....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?198.80 69.62 67.72 below-1.90 14:19 TOC 25.82 69.73 95.55+I FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND/SURFACE a I-A.A WATER TABLE xz-4--.C.J)I CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

67.72-- 25.82=- 41.90 MW-51 20 14:20 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E................

TRANSDUCER V T SENSOR ..........

WELL BOTTOM.....

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID] MW-51 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-51 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3414 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)198.80 69.62 67.80 4 DATUM DATE NGVD 29 4/2/07 STATIC GROUNDWATER TABLE ELEVATION (FT)44.54 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (t) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 198.80 69.62 67.80 below-1.82 15:20 TOC 23.26+ 57.40= 80.66 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?GROUND..'SURFACE WATER TABLE CABLE .....................

PRESSURE .................

TRANSDUCER SENSOR ...........

WELL BOTTOM .................

A A ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

67.80-- 23.2644.54 MW-51 20 15:23 Cq TEST NAME: LOGGING INTERVAL: TEST START TIME: LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING m NOTES: GZA IWELL ID I MW-51 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-52-12 1 of 1 41.0017869.10 am Indian Point W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15847 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)12.00 16.77 16.28 2 DATUM DATE NGVD 29 6/28/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)5.80 CABLE CONNECTOR

...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?12.00 16.77 16.28 below-0.48 9:30 GS FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F GROUND SURFACE WATER TABLE--\+9.97 1.68 11.65.A U-A A 0 check check ci-CABLE .....................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.77-- 9.97=- 5.80 MW-52-12 20 9:57 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.I

.................

TRANSDUCER SENSOR .........WELL BOTTOM .......T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AO -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water level referenced to ground surface elevation in error. Actual ground surface elevation was 16.77 ft msl.Actual water elevation was 6.8 ft msl.GZA IWELL ID: MW-52-12 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-52-12 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15847 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)12.00 16.77 16.28 2 DATUM DATE NGVD 29 10/18/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.15 CABLE CONNECTOR

...............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 12.00 16.77 16.28 below-0.49 13:43 GS 9.62 2.65 12.27 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4.-.GROUND..-SURFACE A 1-4 A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: WATER TABLE zz--+ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C I-F CABLE .....................

C 4 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.77-- 9.62= 7.15 MW-52-12 1 13:46 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR..........

WELL BOTTOM---..........

v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID'O MW-52-12 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-52-12 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15847 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)12.00 16.77 16.28 2 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)6.22 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 12.00 16.77 16.28 below-0.49 14:12 GS 10.55 1.72 12.27 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F GROUND...'

SURFACE WATER.TABLE A I-.A A.TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE ..............................

£C I-C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.77-- 10.55= 6.22 MW-52-12 20 14:13 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ...... ......WELL BOTTOM...'v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-52-12 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-52-12 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10

'SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15847 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)12.00 16.77 16.28 2 DATUM DATE NGVD 29 12/15/06 STATIC GROUNDWATER TABLE ELEVATION (Fr)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)6.08 CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?12.00 16.77 16.28 below-0.49 8:57 GS 10.69 1.63 12.32+I FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE ac A&r C I, CABLE ...................

[ .ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.77-- 10.69= 6.08 MW-52-12 20 8:59 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..... .......WELL BOTTOM ...........

0 LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-52-12 TRANSDUCER-INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORM 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client ie Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-52-12 1 of 1 I I 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5533 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)12.00 16.77 16.28 2 DATUM DATE NGVD 29 3/23/07 STATIC GROUNDWATER TABLE ELEVATION (FT)5.85 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 12.00 16.77 16.28 below-0.49 11:04 GS 10.92+ 1.96= 12.88 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS¶ .~.i.4 GROUND" SURFACE WATER TABLE A Ri-A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?r CABLE ..............................

"*A O-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.77-- 10.92= 5.85 MW-52-12 20 11:05 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR............

WELL BOTTOM .......v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer replaced with a re-calibrated transducer.

GZA IWELL ID :1 MW-52-12 0 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-52-11 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 EWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 CIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5533 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)12.00 16.77 16.28 2 DATUM DATE NGVD 29 4/12/07 STATIC GROUNDWATER TABLE ELEVATION (FT) *7.09 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.00 16.77 16.28 below-0.49 9:13 TOC 7.88+ 2.77= 10.65 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: YHEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER .TABLE A I--I-A A___*z-7 ,U HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE"'SURFACE" READINGS?£I-CABLE ..............................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.97-- 7.88= 7.09 MW-52-12 20 9:15 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR .....WELL BOTTOM-..

..............

V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING* Water level referenced to casing elevation in error. Actual casing elevation was 16.283 ft msl. Actual water elevation was 8.40.GZA IWELL ID: MW-52-11 TRANSDUCER INSTALLATION LOC~GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MWN-52-200 1 of 1 41.0017869.10 1 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6097 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)193.00 16.77 16.37 4 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.11 CABLE CONNECTOR

........................

10'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 193.00 16.77 16.37 below-0.40 13:03 GS 9.66+ 17.993= 27.653 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4 GROUND-SURFACE WATER TABLE A 4 A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: xz-Z 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C I-le CABLE ...............

.*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.77-- 9.667.11 MW-52-200 20 13:08 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...... ......WELL BOTTOM .................

v IV V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :j MW-52-200 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-52-200 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6097 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)193.00 16.77 16.37 4 DATUM DATE NGVD 29 10/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)6.39 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 193.00 16.77 16.37 below-0.40 9:01 GS 10.38+ 40.644"" 51.024 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS I 4 GROUND...*

SURFACE WATER TABLE CABLE .....................

A A F C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CR ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.77-- 10.38= 6.39 MW-52-200 20 9:02 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E TRANSDUCER Fl Li v SENSOR .........WELL BOTTOM"---...

Yr LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-52-200 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-52-200 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6097 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)193.00 16.77 14.92 4 DATUM DATE NGVD 29 10/18/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.24 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?193.00 16.77 14.92 below-1.85 13:42 GS 9.53+ 40.778= 50.308 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS f 4 GROUND,:'SURFACE WATER.TABLE A A A xz-~qJ 0 ,1-CABLE ........................

11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.77-- 9.53"= 7.24 MW-52-200 1 13:42 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR..

.................

TRANSDUCER SENSOR ......WELL BOTTOM ........0, v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL IDI MW-52-200 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-52-200 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6097 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)193.00 16.77 14.92 4 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)6.20 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

10'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 193.00 16.77 14.92 below-1.85 14:17 GS 10.57+ 39.851= 50.421 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER.TARLF A-I-A A~qJ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?===CABLE ......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

16.77-- 10.57= 6.20 MW-52-200 20 14:18 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ..........

WELL BOTTOM"----....

H Li'Yr v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-52-200 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-53-80 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5376 FINAL BORING DEPTH (F T)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 69.93 2 DATUM DATE NGVD 29 8/10/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)15.02 CABLE CONNECTOR

........................

10-DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 80.00 70.26 69.93 below-0.33 14:11 GS 54.98+ 27.026= 82.006 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE am A A-"5 C-)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?.--CABLE ....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 54.98-" 15.02 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-53-80 20 14:14 PRESSUR.E

.................

TRANSDUCER SENSOR ....WELL BOTTOM ........V V'V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 70.26 ft msl.Actual water elevation was 15.28 ft msl.GZA IWELL ID ] MW-53-80 I TRANSDUUC IN STALLATION LUC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW53-80 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of I NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5376 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 69.93 2 DATUM DATE NGVD 29 11/8/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)9.94 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 82.00 70.26 69.93 below-0.33 9:58 GS 60.06+ 20.75-80.81 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: CABLE CONNECTOR

..........

GROUND..SURFACE WATER .TABLE CABLE ............................

PRESSURE.TRANSDUCER SENSOR ....... .O U-A A-i C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 60.06-9.94 MW53-80 20 10:00 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: WELL BOTTOM"'---

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 70.26 ft msl.Actual water elevation was 10.20 ft msl.GZA IWELL ID:1 MW-53-80

___ TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-53-80 1 oft1 41.0017869.10 m Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5376 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 69.93 2 DATUM DATE NGVD 29 12/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)3.06 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -I: MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?82.00 70.26 69.93 below-0.33 13:21 TOC 66.87+ 20.470= 87.340 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS F U GROUND.SURFACE WATER.TABLE ac--i.-A A C-I 31=-CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.93-- 66.87=- 3.06 MW-53-80 20 13:23 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ........WELL BOTTOM .........0 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-53-80 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-53-80 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5376 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 69.93 2 DATUM DATE NGVD29 3/8/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)10.85 CABLE CONNECTOR

................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 82.00 70.26 69.93 below-0.33 82.00 13:48 TOC 59.08+ 22.456=- 81.536 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER .TABLE A I--I-A A..J U HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I IC a=CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.93-- 59.0810.85 MW-53-80 20 13:54 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUFRE

.................

TRANSDUCER SENSOR ...... ......WELL BOTTOM ...........

V It v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-53-80 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-53-80 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5376 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 69.93 2 DATUM DATE NGVD29 4/3/07 STATIC GROUNDWATER TABLE ELEVATION (FT)10.61 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 82.00 70.26 69.93 below-0.33 10:30 TOC 59.32+ 22.317= 81.637 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE WATER TABLE A I--F A A F O~HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.93-- 59.3210.61 MW-53-80 20 10:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR....

WELL BOTTOM***"******.........

v IV LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :j MW-53-80 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-53-82 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11897 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 69.93 2 DATUM DATE NGVD 29 7/6/07 10.36 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER M. Britos ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 82.00 70.26 69.93 below-0.33 15:24 TOC 59.57+ 22.049= 81.619 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND...SURFACE WATER TABLE am A A If ,4.1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I" C'CABLE ..................

I ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.93-- 59.57"" 10.36 MW-53-82 20 15:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR ..................

TRANSDUCER SENSOR ...... ......WELL BOTTOM .......v v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-53-82 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-53-120 1 oft1 41 .001 7869.10 Indian Point I I 1W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3062 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 70.06 DATUM DATE NGVD 29 8/1/06 20.04 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 120.00 70.26 70.06 below-0.20 13:05 GS 49.96+ 47.065=- 97.025 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND. -, SURFACE WATER TABLE A I--A A 0 C I-C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 49.96-= 20.04 MW-53 20 13:19 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR....

........WELL BOTTOM-..

..........

V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 70.26 ft msl.Actual water elevation was 20.3 ft msl.GZA IWELL ID :1 MW-53 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-53-120 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3062 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 70.06 1 DATUM DATE NGVD 29 8110/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)12.27 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 120.00 70.26 70.06 below-0.20 1405 GS 57.73+ 50.073= 107.803 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT*FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND." SURFACE WATER TABLE A I--I-A A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?:11-"a CIO CABLE .....................

C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 57.73"- 12.27 MW-53-120 20 1407 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURJ .................

TRANSDUCER V SENSOR ..... ......WELL BOTTOM ...............

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 70.26 ft msl.Actual water elevation was 12.53 ft msl.GZA IWELL D:1 MW-53-120 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-53-1 20 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3062 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 70.06 1 DATUM DATE NGVD 29 11/8/06 STATIC GROUNDWATER TABLE ELEVATION (FT) *9.42 GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR-): MEASURED CABLE LENGTH: 120.00 70.26 70.06 below-0.20 10:05 GS 60.58+ 47.38-107.96 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT.F-, 4 GROUND.SURFACE WATER TABLE A I-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: zz--..O HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check ci-CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 60.58=- 9.42 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: MW53-120 20 10:09 PRESSURE ..........

TRANSDUCER SENSOR ...............

WELL BOTTOM ...........

j I, V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 70.26 ft msl.Actual water elevation was 9.68 ft msl.GZA IWELL ID: MW-53-120 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-53-120 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6097 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.260 70.190 1 DATUM DATE NGVD 29 5/31/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)9.75 CABLE CONNECTOR

.....DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR -): MEASURED CABLE LENGTH: 120.00 70.260 70.190 below-0.07 15:58 TOC 60.44+ 40.214= 100.654 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS.4 GROUND-SURFACE WATER TABLE RI-F-1-xz--Aýr.A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?=iD CABLE .......................

-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.190-- 60.44= 9.75 MW53-120 20 15:59 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ..........

WELL BoTroM .............

V T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

New elevation; PVC coupling attached to well GZA IWELL ID ] MW-53-120 TRANSDUCER INSTALLATION LOCG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-53-120 1 of1 I I 41.0017869.10

]Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER GZA ENGINEER In-Situ MiniTroll 30 6097 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.260 70.190 1 DATUM DATE NGVD 29 6/11/07 STATIC GROUNDWATER TABLE ELEVATION (FT)11.09 A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR----...

0 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 120.00 70.260 70.190 below-0.07 10:32 TOC 59.10+ 59.298 118.398 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..-SURFACE WATER TABLE A A A JI 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-CABLE .............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.190-- 59.10=- 11.09 MW53-120 20 10:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

..................

TRANSDUCER SENSOR ............

WELL BOTTOM ........'v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID] MW-53-120 TRANSDUCER INSTALLATION LOGC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-53 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 69.38 4 DATUM DATE NGVD 29 7/10/06 STATIC GROUNDWATER TABLE ELEVATION (FT) *11.68 GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..........

t ..........

"".DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 124.70 70.26 69.38 below-0.88 13:38 TOC 57.70+ 46.85-" 104.55 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPT14 TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-SURFACE WATER TABLE CABLE ....................

A A ,C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.38-- 57.70= 11.68 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW53 10 13:46 Fl Li TRANSDUCER V V SENSOR ..............

WELL BOTTOM----..

il LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Multi-level wells (pvc) not yet installed.

Estimated casing elevation used to reference water elevation.

Actual ground surface elevation was 70.26 ft msl.GZA IWELL ID ] MW-53 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-53 1 of i 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3062 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 69.38 4 DATUM DATE NGVD 29 7/13/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)22.09 CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 124.70 70.26 69.38 below-0.88 9:49 GS 47.91+ 51.031= 98.941 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F GROUND.SURFACE WATER.TABLE A A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: C..HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check O-CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 47.91= 22.09 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-53 20 9:51 PRESSURFE..........

TRANSDUCER SENSOR ...... ......WELL BOTTOM ........0: V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Multi-level wells (pvc) not yet installed.

Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 70.26 ft msl.Actual water elevation was 22.35 ft msl.GZA IWELL ID: MW-53 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-53 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3062 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)124.70 70.26 69.38 4 DATUM DATE NGVD 29 7/18/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)22.87 CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?124.70 70.26 69.38 below-0.88 11:16 GS 47.13+ 51.031= 98.161 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS F GROUND.SURFACE WATER TABLE A A-IJ C-, I.-I)CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 47.13= 22.87 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-53 20 11:18 PRESSURJ .................

TRANSDUCER SENSOR.WELL BOTTOM ............

D T V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Multi-level wells (pvc) not yet installed.

Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 70.26 ft msl.Actual water elevation was 23.13 ft msl.GZA IWELL ID:1 MW-53 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-54 1 of 1 41.0017869.10 Indian Point 1W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16346 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)206.00 14.99 14.76 4 DATUM DATE NGVD 29 10/13/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.50 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 206.00 14.99 14.76 below-0.23 8:17 TOC 7.27+ 92.792-100.062 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE WATER TABLE A I--I-A A zz-..J 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?On=CABLE .......................

10 0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.77-- 7.27-7.50 MW-54 20 8:22 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ............

WELL BOTTOM ..............

v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-54 TRANSDUCER INSTALLATION LOU _GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-54 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16346 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)206.00 14.99 14.76 4 DATUM DATE NGVD 29 10/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)7.60 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?206.00 14.99 14.76 below-0.23 8:29 TOC 7.17+ 18.771-" 25.941 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS Ir 4 GROUND.: SURFACE WATER TABLE A ac-1-i-A A C.5)Ik CABLE .....................

"*0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.77-- 7.17= 7.60 MW-54 1 8:31 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR..........

WELL BOTTOM ...........

v...........

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-54 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-54 1 of 1 41.0017869.10 Indian Point I I mw MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16346 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)206.00 14.99 14.76 4 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)5.64 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?206.00 14.99 14.76 below-0.23 8:34 TOC 9.13+ 16.853"" 25.983 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r GROUND..: SURFACE WATER TABLE A 0-A A C CABLE ........................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.77-- 9.13= 5.64 MW-54 20 8:35 C=m I-TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ......WELL BOTTOM ...........

0 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-54 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-54 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16346 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)206.00 14.99 13.09 4 DATUM DATE NGVD 29 1/16/07 STATIC GROUNDWATER TABLE ELEVATION (FT)6.13 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 206.00 14.99 13.09 below-1.90 10:56 GS 8.86+ 17.632= 26.492 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS ,- U GROUND..SURFACE WATER TABLE A+..A v.qJ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C i-1C CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.99-- 8.866.13 MW-54 20 10:57 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM .......V V v-.LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL I:D MW-54 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-55-24 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4432 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.67 DATUM DATE NGVD 29 9/25/06 7.52 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...... ............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 24.00 18.25 17.67 below-0.58 14:21 GS 10.98+ 12.35= 23.33 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4-GROUND.SURFACE WATER TABLE Ri I-: A&.A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:-ýj.0.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C i-it CABLE ....................

4 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.50-- 10.98=- 7.52 MW-55-24 20 14:23 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR..........

WELL BOTTOM....

V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 18.25 ft msl.Actual water elevation was 7.27 ft msl.GZA IWELL ID ] MW-55-24 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-55-24 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4432 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.67 1 DATUM DATE NGVD 29 9/27/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.57 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 24.00 18.25 17.67 below-0.58 8:31 TOC 10.34 7.57 17.91 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F 4 GROUND..SURFACE WATER TABLE TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: zz-+A I-i A A C-, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I-CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.91-- 10.34"- 7.57 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-55-24 20 8:32 PRESSURE.........

TRANSDUCER SENSOR ..........

WELL BOTTOM ........LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 18.25 ft msl.Actual water elevation was 7.33 ft msl.GZA IWELL ID :1 MW-55-24 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-55-24 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4432 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.67 1 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.79 CABLE CONNECTOR

........................ .I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 24.00 18.25 17.67 below-0.58 8:31 TOC 10.12+ 13.08= 23.20 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND...'

SURFACE A I--I-A A WATER TABLE xz--"a C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-i CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.91-- 10.12-7.79 MW-55-24 20 15:03 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM .......:D It V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 18.25 ft msl.Actual water elevation was 7.55 ft msl.GZA IWELL ID ] MW-55-24 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-55-24 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869:10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4432 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.68 DATUM DATE NGVD 29 12/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)6.85 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -: MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?24.00 18.25 17.68 below-0.57 8:42 TOC 10.83+ 6.39-= 17.22 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND, SURFACE A A WATER TABLE~qJ 0 1-i ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.68-- 10.83-6.85 MW-55-24 20 8:45 CABLE .....................

PRESSURE TRANSDUCER SENSOR .......WELL BOTTOM ......TEST NAME: LOGGING INTERVAL: TEST START TIME: T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-55-24 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-55-24 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4432 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.77 1 DATUM DATE NGVD 29 12/27/06 STATIC GROUNDWATER TABLE ELEVATION (FT)7.09 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 24.00 18.25 17.77 below-0.48 13:44 TOC 10.68+ 5.96= 16.64 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.'SURFACE WATER.TABLE A I A A r S o,..HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?On CABLE ......................

1£ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.77-- 10.68= 7.09 MW-55-24 20 13:45 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..... .....WELL BOTTOM.....

V.v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL IDI MW-55-24 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-55-24 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13988 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.77 1 DATUM DATE NGV0 29 3/22/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.08 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?24.00 18.25 17.77 below-0.48 11:12 TOC 9.69+ 6.00=- 15.69 FT FT M.S.L.FT M.S.L.FT FT CABLE CONNECTOR

........................

v 4 GROUND.SURFACE WATER .TABLE A HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS A CABLE ............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.77-- 9.69= 8.08 MW-55-24 20 11:14 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR .............

WELL BOTTOM .......LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-55-24 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-55-24 1 of 1 41.0017869.10 Indian Point 1W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13988 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.77 1 DATUM DATE NGVD 29 4/6/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.25 CABLE CONNECTOR

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 24.00 18.25 17.77 below-0.48 14:04 TOC 9.52+ 6.20=- 15.72 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND..SURFACE a-A A WATER TABLE................

a. ý= 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.77-- 9.528.25 MW-55-24 20 14:06 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E.

.................

TRANSDUCER SENSOR ............

WELL BOTTOM ................

0.... ...I F LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL IDI MW-55-24 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-55-35 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5965 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.67 1 DATUM DATE NGVD 29 9/25/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.43 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 35.00 18.25 17.67 below-0.58 14:26 GS 11.07+ 14.58= 25.65 CABLE CONNECTOR

........................

TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER .TABLE CABLE .....................A A~~1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I.ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.50-- 11.07-7.43 MW-55-35 20 14:47 TEST NAME: LOGGING INTERVAL: TEST START TIME: D TRANSDUCER V SENSOR....

WELL BOTTOM"'---

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:*Estimated ground surface elevation used to reference water elevation.

Actual ground surface elevation was 18.25 ft msl.Actual water elevation was 7.17 ft msl.GZA IWELL ID]0 MW-55-35 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-55-35 1 of 1 41.0017869.10 Indian Point I I 1W MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 77.50 MAKE MiniTroll GROUND ELEVATION (FT) 18.25 PSI CAPACITY 30 CASING ELEVATION (FT) 17.67 SERIAL NUMBER 5965 CASING DIAMETER (INCH) 1 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DATUM DATE NGVD 29 9/27/06 7.22 CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 35.00 18.25 17.67 below-0.58 8:35 TOC 10.69+ 14.78-25.47 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT GROUND-SURFACE WATER.TABLE A ac-1-i-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: xz-7~~1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CP CABLE .............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.91-- 10.69= 7.22 MW-55-35 20 8:36 FT M.S.L FT FT M.S.L MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..........

TRANSDUCER V v SENSOR............

WELL BOTTOM ..............

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated casing elevation used to reference water elevation.

Actual casing elevation was 17.67 ft msl.Actual water elevation was 6.98 ft msl.GZA IWELL'I :1 MW-55-35 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-55-35 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5965 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.67 1 DATUM DATE NGVD 29 11/6106 7.20 STATIC GROUNDWATER TABLE ELEVATION (FT) *GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

............

......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (÷) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CA13LE LENGTH: 35.00 18.25 17.67 below-0.58 15:14 TOC 10.71 14.88 25.59 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT GROUND./SURFACE WATER TABLE A A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+~..O HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C I.CABLE .............................. "l-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.91-- 10.71= 7.20 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-55-35 20 15:14 PRESSURE.........

TRANSDUCER SENSOR ..... .....WELL BOTTOM"--`

JV T V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD , ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated casing elevation used to reference water elevation.

Actual casing elevation was 17.67 ft msl.Actual water elevation was 6.96 ft msl.GZA IWELL ID] MW-55-35 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS IClient Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-55-35 1 of 1 41 .001 7869.10 Indian Point I I mw MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3414 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.77 1 DATUM DATE NGVD 29 5/30/07 STATIC GROUNDWATER TABLE ELEVATION (FT)8.22 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 35.00 18.25 17.77 below-0.48 12:30 TOC 9.55+ 15.61-25.16 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS¶ I GROUND.: SURFACE WATER TABLE A Bi-A A r_ý1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-CABLE ...................

I ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.77-- 9.55= 8.22 MW-55-35 20 12:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR............

WELL BOTTOM .........H I~I-LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID] MW-55-35 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-55-35 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3414 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 17.77 1 DATUM DATE NGVD 29 6/12/07 9.36 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?35.00 18.25 17.77 below-0.48 13:44 TOC 8.41 25.32 33.73+FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE Bi WATER TABLE'--/A-"a U CABLE ..................

I IF A 0-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.77-- 8.41= 9.36 MW-55-35 20 13:53 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR............

WELL BOTTOM............

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

New elevation; PVC coupling attached to well.GZA IWELL ID] MW-55-35 TRANSDUCER INSTALLATION LOCG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-55 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4432 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 4 DATUM DATE MSL 8/25/06 STATIC GROUNDWATER TABLE ELEVATION (FT) *8.68 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 77.50 18.25 above 1345 TOC 10.82+ 15.055= 25.875 FT FT A.S.L.FT A.S.L.FT FT HRS FT FT FT check check FT A.S.L.FT FT A.S.L.MIN HRS F GROUND..." SURFACE WATER TABLE A..--I-A A_,.1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ...............................

C-d a-m ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

19.50-- 10.82-" 8.68 MW-55 20 1348 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ............

WELL BOTTOM ...........

0 V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Multi-level wells (pvc) not yet installed.

Estimated casing elevation used to reference water elevation.

Actual casing elevation unknown.GZA I WELL ID] MW-55 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-55 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4432 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.50 18.25 4 DATUM DATE MSL 9/8/06 STATIC GROUNDWATER TABLE ELEVATION (FT) *12.44 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...........

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 77.50 18.25 above 1358 TOC 6.06+ 16.81-22.87 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT A.S.L.FT A.S.L.FT FT HRS FT FT FT check check FT A.S.L.FT FT A.S.L.MIN HRS 9. ~GROUND..SURFACE A Bi F-I-A A F WATER TABLE................

I. ý=HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .....................

V ,..1 ca ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.50-- 6.06= 12.44 MW-55 20 1359 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..............

WELL BOTTOM .....................

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Multi-level wells (pvc) not yet installed.

Estimated casing elevation used to reference water elevation.

Actual casing elevation unknown.GZA IWELL ID :] MW-55 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-56-54 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.26 69.32 2 DATUM DATE NGVD 29 12/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)21.67 CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (÷ OR -): MEASURED CABLE LENGTH: 54.00 70.26 69.32 below-0.94 11:59 GS 48.59+ 2.187= 50.777 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT v___ 4 4 GROUND.SURFACE WATER TABLE A Ri-A.A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: xz-~qJ U HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I.CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.26-- 48.59= 21.67 MW-56-54 20 12:00 FT M.S.L..FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR....

........WELL BOTTOM------

0-v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/TOP OF CASING NOTES: GZA IWELL ID :1 MW-56-54 S TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-56-54 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 6CIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.26 69.32 DATUM DATE NGVD 29 12/28/06 STATIC GROUNDWATER TABLE ELEVATION (Fr)23.47 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION; CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?54.00 70.26 69.32 below-0.94 9:31 GS 46.79+ 3.104= 49.894 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..:" SURFACE A A WATER TABLE CABLE .....................,C.1 CIO ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.26-46.79= 23.47 MW-56-54 20 9:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..............

TRANSDUCER SENSOR .........WELL BOTTOM ...........

If l LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZJ IWELL ID :1 MW-56-5 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORM 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS lClient Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-56-54 1 Of 1 41.0017869.10 Indian Point I .I MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.26 69.32 2 DATUM DATE NGVD 29 4/3/07 STATIC GROUNDWATER TABLE ELEVATION (FT)25.21 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 54.00 70.26 69.32 below-0.94 10:46 TOC 44.11+ 5.613= 49.723 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?GROUND.SURFACE WATER TABLE CABLE ................

PRESSUR. .................

TRANSDUCER SENSOR .....WELL BOTTOM ............

A I-A v 0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

A 69.32-- 44.11"- 25.21 MW-56-54 20 11:00~,.1 0 C.P llý--9=11 TEST NAME: LOGGING INTERVAL: TEST START TIME: LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA iWELL ID :1 MW-56-54 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-56-53 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.26 69.32 2 DATUM DATE NGVD 29 6221/07 STATIC GROUNDWATER TABLE ELEVATION (FT)21.92 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 53.00 70.26 69.32 below-0.94 9:15 TOC 47.40+ 0.842= 48.242 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE A I-A WATER TABLE-................

0 --C.1)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I.CABLE ..................

..4: C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.32-47.40= 21.92 MW-56-53 20 9:18 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR.WELL BOTTOM--'--...

R].S LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: MW-56-53 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-56-53 1 of 1 41 .0017869.10 Indian Point I I mw MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.26 69.32 2 DATUM DATE NGVD 29 6/26/07 21.43 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER .S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I(-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 53.00 70.26 69.32 below-0.94 9:43 TOC 47.89+ 3.369= 51.259 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/: SURFACE WATER TABLE A I-A A IF j C, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C--CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.32-- 47.8921.43 MW-56-53 20 9:46 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

.............

TRANSDUCER SENSOR ............

WELL BOTTOM---`

'r V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-56-53 0 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-56-83 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11802 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.258 69.207 1 DATUM DATE NGVD 29 5/31/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)21.14 CABLE CONNECTOR

.....DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 83.00 70.258 69.207 below-1.05 9:56 TOC 48.18+ 2.719= 50.899 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE A A A-* -________________

.1 C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?0-CABLE .....................

1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.322-- 48.1821.142 MW-56-83 20 9:57 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ...........

WELL BOTTOM"...

.........0.....v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to casing elevation in error. Actual casing elevation was 69.207 ft msl.Actual water elevation was 21.027 ft msl.GZA IWELL ,0:1 MW-56-83 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-56-83 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11802 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.258 69.207 1 DATUM DATE NGVD629 6/13/07 22.27 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 83.00 70.258 69.207 below-1.05 15:57 TOC 46.94+ 3.918= 50.858 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 4 GROUND.'SURFACE WATER.TABLE A A.A xz-CABLE CONNECTOR

.......................

,4,1 C..HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I-C CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.207-- 46.94=- 22.267 MW-56-83 20 16:02 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ......WELL BOTTOM---...............

V IV LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: MW-56-83 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-56 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.00 4 DATUM DATE MSL 9/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)24.59 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

10'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING-TO GROUND I+ OR -): MEASURED CABLE LENGTH: 88.50 70.00 below 9:33 GS 45.41+ 4.660= 50.070 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT A.S.L.FT A.S.L.FT FT HRS FT FT FT check check FT A.S.L.FT FT A.S.L.MIN HRS m GROUND.." SURFACE WATER .TABLE A ai-VI A A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I.-CABLE .....................

10-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 45.41= 24.59 MW-56 20 9:34 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ......WELL BOTTOM .............

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Ground surface elevation is estimated.

GZA IWELL ID :1 MW-56 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-56 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 71.00 4 DATUM DATE MSL 10/11/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)22.58 CABLE CONNECTOR

.......................

10 'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 88.50 71.00 below 10:03 TOC 46.79+ 3.225= 50.015 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT A.S.L.FT A.S.L.FT FT HRS FT FT FT check check FT A.S.L.FT FT A.S.L.MIN HRS.4 GROUND. : SURFACE WATER.TABLE A I--I-.A .HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ...............................

1 I V 0 I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.37-- 46.79=- 22.58 MW-56 20 10:04 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ............

WELL BOTTOM*""*'*

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Ground surface elevation is estimated.

GZA IWELL ID]: MW-56 0 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-56 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.26 68.56 4 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning property)24.08 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?88.50 70.26 68.56 below-1.70 14:10 TOC 45.29+ 4.727= 50.017 FT FT A.S.L.FT A.S.L.FT FT HRS FT FT FT check check FT A.S.L.FT FT A.S.L.MIN HRS GROUND-SURFACE WATER TABLE A I-=-F A&A x;;7--.1 0 C--CABLE ..................

........ I ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.37-45.29=. 24.08 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-56 20 14:11 PRESSURE .................

TRANSDUCER SENSOR ..........

WELL BOTTOM ..............

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Estimated casing elevation used to reference water elevation.

Actual casing elevation was 68.56 ft msl.Actual water elevation was 23.27 ft msl.GZA IWELLID :1 MW-56 TRANSDUUCR IN:STALLATION LO(C GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-56 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.26 68.56 4 DATUM DATE NGVD 29 11/22/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)25.08 CABLE CONNECTOR

...................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 88.50 70.26 68.56 below-1.70 10:47 TOC 43.48+ 6.563= 50.043 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT A.S.L.FT A.S.L.FT FT HRS FT FT FT check check FT A.S.L.FT FT A.S.L.MIN HRS 4-.GROUND-SURFACE WATER.TABLE Vz A ac-1-4-.A F.Oq HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I-C CABLE ...............

.1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

68.56-- 43.48= 25.08 MW-56 20 10:48 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..........

TRANSDUCER SENSOR ......WELL BOTTOM'I-7-V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Ground surface elevation is estimated.

GZA IWELL I0:1 MW-56 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-56-54 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.26 68.56 4 DATUM DATE NGVD 29 12/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)21.67 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 88.50 70.26 68.56 below-1.70 11:59 GS 48.59+ 2.187-- 50.777 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/".SURFACE WATER TABLE A I-A A If~~1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I CABLE ...................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.26-- 48.59= 21.67 MW-56-54 20 12:00 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURe.

.........TRANSDUCER SENSOR ............

WELL BOTTOM ..........

0 IV v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-56-54 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK IClient WELL ID MW-56 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point 0 MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14150 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)88.50 70.26 68.56 4 DATUM DATE NGVD 29 12/28/06 STATIC GROUNDWATER TABLE ELEVATION (FT)23.47 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR'----...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 88.50 70.26 68.56 below-1.70 9:31 GS 46.79+ 3.104= 49.894 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND." SURFACE WATER TABLE A I--v A A F zz-.q HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?com CABLE ...................

I ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.26-46.79= 23.47 MW-56-54 20 9:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

.............

TRANSDUCER SENSOR ...........

.WELL BOTTOM---..............

0 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-56-54 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-11 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5576 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.63 1 DATUM DATE NGVD 29 9/11/06 STATIC GROUNDWATER TABLE ELEVATION (FT)10.62 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

I0 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.00 14.98 14.63 below-0.35 14:13 TOC 4.06+ 6.248= 10.308 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS I 4 GROUND..." SURFACE WATER.TABLE A A A zz-C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?rI I.CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.68-- 4.06= 10.62 MW-57-11 20 14:19 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..........

TRANSDUCER SENSOR............

WELL BOTTOM""---...

v If v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:j MW-57-11 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-57-11 1 of 1 41.0017869.10 Indian Point I I 1w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5576 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.63 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT)9.55 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.00 14.98 14.63 below-0.35 8:24 TOC 5.13+ 5.527=- 10.657 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND...'

SURFACE WATER TABLE A Ri-A Ir 1;7-0-'-I 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..................

".ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.68-- 5.13-= 9.55 MW-57-11 20 8:24 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUF. ...............

TRANSDUCER SENSOR ............

WELL BOTTOM ......V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Estimated elevations.

GZA IWELL ID:1 MW-57-11 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-11 440 NINTH AVENUE, 18th FLOOR Entergy SHEET l of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5576 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.63 DATUM DATE NGVD 29 12/13/06 STATIC GROUNDWATER TABLE ELEVATION (FT)8.33 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.00 14.98 14.63 below-0.35 14:18 TOC 6.30+ 1.416" 7.716 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m GROUND..SURFACE WATER.TABLE.1--I A A.1)C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?il--CABLE .....................

0*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.63-- 6.30= 8.33 MW-57-11 20 14:19 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR.WELL BOTTOM ...........

0...v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CA13LE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-57-11 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-11 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5576 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.73 1 DATUM DATE NGVD 29 12/26/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)9.58 CABLE CONNECTOR

..........

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 11.00 14.98 14.73 below-0.25 13:56 TOC 5.21+ 2.2657.475 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS , 3--,.GROUND.." SURFACE WATER TABLE A A A r-I.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CI-CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.79-- 5.21" 9.58 MW-57-11 20 13:57 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..........

WELL BOTTOM ..........

rim7 0 0Ii V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to casing elevation in error. Actual casing elevation was 14.63 ft msl.Actual water elevation was 9.52 ft msl.GZA IWELL ID :1 MW-57-11 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-11 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5576 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.73 1 DATUM DATE NGVD 29 2/20/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.59 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (M) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.00 14.98 14.73 below-0.25 14:04 TOC 7.20+ 2.531= 9.731 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE A A~~1 C.)r HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.79-- 7.20= 7.59 MW-57-11 20 14:07 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ..........

WELL BOTTOM .........LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to casing elevation in error. Actual casing elevation was 14.63 ft msl.Actual water elevation was 7.53 ft msl.GZA IWELL ID ] MW-57-11 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-11 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5576 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.73 1 DATUM DATE NGVD29 4/2/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S.Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)10.28 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.00 14.98 14.73 below-0.25 8:37 TOC 4.51+ 4.796" 9.306 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE A I--I-I A.F , C.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I"-CABLE ....................... "l-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.79-- 4.51= 10.28 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-57-11 20 8:39 PRESSURE ..................

TRANSDUCER SENSOR .........WELL BOTTOM .................

V i'LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to casing elevation in error. Actual casing elevation was 14.63 ft msl.Actual water elevation was 10.22 ft msl.GZA IWELL ID:1 MW-57-11 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-11 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of I NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5576 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.73 1 DATUM DATE NGVD 29 6/8/07 STATIC GROUNDWATER TABLE ELEVATION (FT)11.19 GZA ENGINEER S.Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.00 14.98 14.73 below-0.25 13:32 TOC 3.60+ 7.410= 11.010 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE WATER TABLE A ac-1-iF A A-* -, xz HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

10 C 4i C ,4J U C I-C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.79-- 3.60=" 11.19 MW-57-11 20 13:35 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURK ...........

TRANSDUCER SENSOR ............

WELL BOTTOM V IT'V LEGEND: DWN -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to casing elevation in error. Actual casing elevation was 14.73 ft msl.Actual water elevation was 11.13 ft msl.GZA IWELL ID:I MW-57-11 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-57-11 1 of 1 41.0017869.10 Indian Point I I IRW MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5576 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.73 1 DATUM DATE NGVD 29 7/2/07 STATIC GROUNDWATER TABLE ELEVATION (FT)9.89 GZA ENGINEER S.Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR -): MEASURED CABLE LENGTH: 11.00 14.98 14.73 below-0.25 12:30 TOC 4.90+ 6.357-" 11.257 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND-." SURFACE WATER.TABLE CABLE .....................

SA.cia.--0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.79-- 4.90-9.89 MW-57-11 20 12:34 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...........

WELL BOTTOM----...........

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to casing elevation in error. Actual casing elevation was 14.73 ft msl.Actual water elevation was 9.83 ft msl.GZA IWELL ID: MW-57-11 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-20 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15940 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.61 DATUM DATE NGVD 29 9/11/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)10.57 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 20.00 14.98 14.61 below-0.37 14:03 casing 4.12+ 14.676-" 18.796 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m 4 GROUND-" SURFACE WATER TABLE A ai-: PI-A A r zz-"a)C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?g¢I'CABLE ..............................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.69-4.12= 10.57 MW-57-20 20 14:05 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR .....WELL BOTTOM ..........

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Water elevation referenced to casing elevation in error. Actual casing elevation was 14.61 ft msl.Actual water elevation was 10.49 ft msl.GZA IWELLID :1 MW-57-20 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS[Client ie Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-57-20 1 of 1 I I 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER GZA ENGINEER In-Situ MiniTroll 30 15940 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.61 1 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT) *9.53 A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 20.00 14.98 14.61 below-0.37 8:19 casing 5.16+ 5.523= 10.683 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-SURFACE A A WATER TABLE-U.0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.69-- 5.16= 9.53 MW-57-20 20 8:19 CABLE ......................

PRESSURE*

..................

TRANSDUCER SENSOR....

........WELL BOTTOM---..........

TEST NAME: LOGGING INTERVAL: TEST START TIME: V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE TOP OF CASING NOTES: Water elevation referenced to casing elevation in error. Actual casing elevation was 14.61 ft msl.Actual water elevation was 9.45 ft msl.GZA IWELL ID ] MW-57-20 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-20 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 ofl NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6100 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.75 1 DATUM DATE NGVD 29 5/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)9.49 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (÷) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 20.00 14.98 14.75 below-0.23 14:29 casing 5.26+ 9.490= 14.750 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE A z-7 A."a 0 F HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..................

I ....... *A.ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.75-- 5.26= 9.49 MW-57-20 20 14:30 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR .............

WELL BOTTOM ................

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE TOP OF CASING NOTES: GZA IWELL ID :1 MW-57-20 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-57-45 1 of 1 41.0017869.10 Indian Point W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11885 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.64 1 DATUM DATE NGVD 29 9/11/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)10.15 CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 45.00 14.98 14.64 below-0.34 14:13 TOC 4.58+ 21.242-25.822 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT MS.L.MIN HRS 4 GROUND..: SURFACE WATER TABLE 1-4 A A xz-C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C* .I-CABLE ...............................

C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.73-- 4.58= 10.15 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-57-45 20 14:00 PRESSUR ...........

TRANSDUCER SENSOR .... ........WELL BOTTOM ..........

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.64 ft msl.Actual water elevation was 10.06 ft mst.GZA IWELL ID ] MW-57-45 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-45 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11885 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.64 1 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.78 CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?45.00 14.98 14.64 below-0.34 8:13 TOC 5.95+ 20.042= 25.992 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS I f GROUND.." SURFACE WATER TABLE CABLE ......................

A A 4-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.73-- 5.95=- 8.78 MW-57-45 20 8:14 V TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .....TRANSDUCER D SENSOR .......WELL BOTTOM ..............

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.64 ft msl.Actual water elevation was 8.69 ft mst.GZA IWELL ID :] MW-57-45 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57-45 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16236 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.98 14.81 1 DATUM DATE NGVD 29 5/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)9.13 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 45.00 14.98 14.81 below-0.17 14:23 TOC 5.68+ 39.125= 44.805 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT r GROUND..SURFACE WATER.TABLE A A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:.U HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check 4I-CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.81-- 5.68= 9.13 MW-57-45 20 14:25 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR .......WELL BOTTOM~~0 v v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-57-45 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-57 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 'NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5965 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.95 4 DATUM DATE MSL 7/28106 10.99 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?46.50 14.95 below 7:50 TOC 3.61+ 21.963=. 25.573 FT FT A.S.L.FT A.S.L.FT FT HRS FT FT FT check check FT A.S.L.FT FT A.S.L.MIN HRS F GROUND: SURFACE WATER TARLE A A A zz---"5 C-)CP CABLE ..................

I........

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.60-- 3.61= 10.99 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-57 20 7:59 PRESSURE.TRANSDUCER SENSOR ...........

WELL BOTTOM'..

.............

V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Estimated casing elevation used to reference water elevation.

Actual casing elevation at time of reference unknown.GZA IWELL ID ] MW-57 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-57 1 Of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER GZA ENGINEER In-Situ MiniTroll 30 5965 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)46.50 14.95 4 DATUM DATE MSL 8/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)9.49 A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 46.50 14.95 below 9:48 GS 5.51+ 21.397= 26.907 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT A.S.L.FT A.S.L.FT FT HRS FT FT FT check check FT A.S.L.FT FT A.S.L.MIN HRS m GROUND...'

SURFACE WATER TABLE A I-A .A C I-C-u1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

!9 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.00-- 5.51= 9.49 MW-57 20 9:52 v TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ............

WELL BOTTOM .................

I'V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-57 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-58-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 72.00 DATUM NGVD 29 MAKE MiniTroll GROUND ELEVATION (FT) 14.57 DATE 9/25/06 PSI CAPACITY 30 CASING ELEVATION (FT) 14.23 SERIAL NUMBER 3114 CASING DIAMETER (INCH) 2 STATIC GROUNDWATER TABLE ELEVATION (FT) *5.88 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...........

....... 10'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 26.00 14.57 14.23 below-0.34 11:10 TOC 7.75+ 16.618= 24.368 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/." SURFACE WATER .TABLE A A A C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ....................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.63-- 7.75= 5.88 MW-58-25 20 11:12 V I-£TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR ................

TRANSDUCER SENSOR..........

WELL BOTTOM ........T V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CAE3LE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.23 ft msl.Actual water elevation was 6.48 ft msl.GZA IWELL ID :1 MW-58-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-58-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3114 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 14.23 2 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)*GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)6.37 CABLE CONNECTOR

...................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 26.00 14.57 14.23 below-0.34 9:49 TOC 7.26+ 17.627"- 24.887 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE A I-A&C-)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I CABLE ..............................

A I-V ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.63-- 7.26= 6.37 MW-58-25 20 9:59 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..............

WELL BOTTOM....

0.LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.23 ft msl.Actual water elevation was 6.97 ft msl.GZA IWELL ID ] MW-58-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-58-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3114 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 14.23 2 DATUM DATE NGVD 29 12/13/06 STATIC GROUNDWATER TABLE ELEVATION (FT)5.39 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...........

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 26.00 14.57 14.23 below-0.34 10:00 TOC 8.84+ 16.053-= 24.893 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS.,- U , GROUND.SURFACE WATER TABLE ac-.A A v_4-'-J HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C 11-i.CABLE ..............................

"*11=111.0c ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.23-- 8.84= 5.39 MW-58-25 20 10:02 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ............

WELL BOTTOM ..........

+v V LEGEND: D'W -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-58-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-58-26 1 of 1 41.0017869.10 Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3114 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 14.23 2 DATUM DATE NGVD 29 3/23/07 STATIC GROUNDWATER TABLE ELEVATION (FT)7.94 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

....................

0 'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): 26.00 14.57 14.23 below-0.34 9:50 TOC 6.29+ 18.750= 25.040 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER.TABLE A ai-A--7 A Jil 0 C, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

C=C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.23-- 6.29" 7.94 MW-58-25 20 9:53 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSU.K.

.........TRANSDUCER SENSOR ............

WELL BOTTOM ................

I V V V& J LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Previous transducer test running as "depth" not "surface" GZA IWELL ID]: MW-58-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-58-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET l of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3114 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 14.23 2 DATUM DATE NGVD 29 3/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)7.78 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.............

DEPTH TO BOTTOM:'GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): 26.00 14.57 14.23 below-0.34 15:42 TOC 6.45+ 18.535"" 24.985 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 1* U 1 GROUND/SURFACE WATER TABLE Bi 71-A A v zz--pJ HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I-l CABLE .......................

11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.23-- 6.45-= 7.78 MW-58-25 20 15:47 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ...... ......WELL BOTTOM .......V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-58-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-58-26 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3114 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 14.23 2 DATUM DATE NGVD 29 5/29/07 8.30 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): 26.00 14.57 14.23 below-0.34 11:23 TOC 5.93+ 19.107= 25.037 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..-SURFACE WATER TABLE A I--I A A r Oq HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C113 CABLE .......................

" ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.23-- 5.93= 8.30 MW-58-26 20 11:25 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .............

TRANSDUCER SENSOR ............

WELL BOTTOM ..............

v v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA [WELL ID :1 MW-58-26 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-58-65 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5533 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 14.14 DATUM DATE NGVD 29 9/26/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)5.59 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?65.00 14.57 14.14 below-0.43 10:49 TOC 7.97+ 41.613=- 49.583 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND: SURFACE WATER TABLE zz-A I-V A A i 0 I-i.CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.56-- 7.97-- 5.59 MW-58-65 20 10:52 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

...............

TRANSDUCER SENSOR ..........

WELL BOTTOM"---

...... ..LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.14 ft msa.Actual water elevation was 6.17 ft msl.GZA IWELL D :1 MW-58-65 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-58-65 1 of 1 41.0017869.10 Indian Point I I MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5533 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 14.14 DATUM DATE NGVD 29 9/26/06 5.98 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -I: MEASURED CABLE LENGTH: 65.00 14.57 14.14 below-0.43 9:54 TOC 7.58+ 42.065= 49.645 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE R A Ir J)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?im CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.56-- 7.58"- 5.98 MW-58-65 20 9:56 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E.

TRANSDUCER SENSOR .........WELL BOTTOM....

H Ii ,p+j'Yr LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.14 ft msl.Actual water elevation was 6.56 ft msl.GZA [WELL ID :1 MW-58-65 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-58-65 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5619 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 14.25 DATUM DATE NGVD 29 5/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)7.32 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR-): MEASURED CABLE LENGTH: 65.00 14.57 14.25 below-0.32 11:13 TOC 6.93+ 41.968= 48.898 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE A F-A A r'.1)C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Ci-CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.25-- 6.93= 7.32 MW-58-65 20 11:15 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

.................

TRANSDUCER SENSOR ..........

WELL BOTTOM ...........

0 7 v...................................................................................

A.v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]: MW-58-65 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-58-65 1 of 1 41.0017869.10 Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5619 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 14.25 DATUM DATE NGVD 29 6/19/07 STATIC GROUNDWATER TABLE ELEVATION (FT)6.92 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?65.00 14.57 14.25 below-0.32 10:18 TOC 7.33+ 57.036= 64.366 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS.GROUND.SURFACE A I--I-.& .&A A WATER TABLE..........

1 0.o-.I"R CABLE ...............

I.........

"*C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.25-7.33-- 6.92 MW-58-65 20 10:19 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR.WELL BOTTOM .........v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer cable replaced.GZA IWELL ID :1 MW-58-65 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-58 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13988 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 13.60 4 DATUM DATE NGVD 29 7/14/06 STATIC GROUNDWATER TABLE ELEVATION (FT)8.15 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-..

................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 72.00 14.57 13.60 below-0.97 8:25 TOC 5.45+ 44.639"- 50.089 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..: SURFACE A ac-A A WATER TABLE xz-7-Il 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I-CABLE ..............................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.60-- 5.45-8.15 MW-58 20 8:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...... ......WELL BOTTOM".....

I v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-58 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-58 1 of 1 41.0017869.10 Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13988 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)72.00 14.57 13.60 4 DATUM DATE NGVD 29 7/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)8.10 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?72.00 14.57 13.60 below-0.97 9:14 TOC 5.50+ 44.309= 49.809 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS IF GROUND..-SURFACE ac--i.-A A WATER TABLE 0~qJ 0 90 I-" Cýb CABLE ..................

".ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.60-- 5.50= 8.10 MW-58 20 9:15 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ...... ......WELL BOTTOM ......0 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID MW-58 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16108 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 14.31 1 DATUM DATE NGVD 29 10/5/06 STATIC GROUNDWATER TABLE ELEVATION (FT)*1.73 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -I: MEASURED CABLE LENGTH: 32.00 14.52 14.31 below-0.21 10:07 TOC 12.09+ 13.59= 25.68 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS a HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?GROUND..SURFACE WATER TABLE CABLE .....................

PRESSURE TRANSDUCER SENSOR ..........

WELL BOTTOM ................

ac-4-I A V~qJ C.)I-A ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.82-- 12.09= 1.73 MW-59-31 20 10:07 TEST NAME: LOGGING INTERVAL: TEST START TIME: 0~V IV V , L LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.31 ft msl.Actual water elevation was 2.22 ft msl.GZA IWELL ID :1 MW-59-32 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16108 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 14.31 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)*GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)1.84 CABLE CONNECTOR

..........

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 32.00 14.52 14.31 below-0.21 10:08 TOC 11.98+ 14.10= 26.08 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M,S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE A 11-4 A A F C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?.1 I.CABLE .....................

0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.82-- 11.98-1.84 MW59-31 20 10:22 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM .........V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.31 ft msl.Actual water elevation was 2.33 ft msl.GZA IWELL ID ] MW-59-32 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16108 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 14.31 1 DATUM DATE NGVD 29 12/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)2.34 GZA ENGIGNEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 32.00 14.52 14.31 below-0.21 8:21 TOC 11.97+ 11.09= 23.06 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE A A A F C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?c CABLE ...................

.ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.31-- 11.97-" 2.34 MW-59-31 20 8:23 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.

..................

TRANSDUCER SENSOR ............

WELL BOTTOM ..............

v IV v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELLID :1 MW-59-32 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point 0 MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16108 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 14.41 1 DATUM DATE NGVD 29 12/22/06 STATIC GROUNDWATER TABLE ELEVATION (FT)0.47 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 32.00 14.52 14.41 below-0.11 8:13 TOC 13.92+ 7.19= 21.11 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT If 4 GROUND/".SURFACE WATER TABLE A U--I-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: o...HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE .................

.... ....... .C14 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.39-- 13.92= 0.47 MW-59-31 20 8:15 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUFRE.

TRANSDUCER SENSOR .........WELL BOTTOM ..........

0 v 1. ..........

V.-LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-59-32 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16108 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 14.41 DATUM DATE NGVD 29 12/26/06 STATIC GROUNDWATER TABLE ELEVATION (FT)2.96 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning property)CABLE CONNECTOR

........................

1 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 32.00 14.52 14.41 below-0.11 14:50 TOC 11.43+ 10.53= 21.96 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE A~~1 C-, A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C I-C CABLE ......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.39-- 11.43= 2.96 MW-59-31 20 14:51 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ............

WELL BOTTOM .....v i LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-59-32 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point 0 MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16108 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 14.41 1 DATUM DATE NGVD 29 3/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)0.66 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 32.00 14.52 14.41 below-0.11 16:01 TOC 13.73+ 8.24= 21.97 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT Ir GROUND-SURFACE WATER.TABLE ac-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:~~1 C-)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C:P CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.39-- 13.73= 0.66 MW-59-31 20 16:05 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ..... .....WELL BOTTOM....

v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA [WELL ID :1 MW-59-32 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client \NELL ID MW-59-32 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16108 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 14.41 DATUM DATE NGVD 29 6/8/07 STATIC GROUNDWATER TABLE ELEVATION (FT)0.84 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

~.. ................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 31.00 14.52 14.41 below-0.11 12:27 TOC 13.57 12.48 26.05 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.." SURFACE WATER TABLE A I--1 A A If.U HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.41-- 13.57= 0.84 MW-59-32 20 12:31-"5 C.)v I-TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR..........

WELL BOTTOM"---......A LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID] MW-59-32 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS I Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-59-45 1 of 1 41.0017869.10 Indian Point I I NW MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16108 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 13.90 DATUM DATE NGVD 29 10/5/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)3.58 CABLE CONNECTOR

........................

-DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 45.00 14.52 13.90 below-0.62 10:10 TOC 9.91 16.03 25.94 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND...SURFACE WATER TABLE A Ric=A A.-q 0.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?C i-C CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.49-- 9.91"- 3.58 MW-59-45 20 10:13 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ......WELL BOTTOM....

V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.52 ft msl.Actual water elevation was 3.99 ft msl.GZA IWELL ID ] MW-59-45 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-45 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16108 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 *13.90 1 DATUM DATE NGVD 29 11/6106 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)3.42 CABLE CONNECTOR

...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 45.00 14.52 13.90 below-0.62 10:13 TOC 10.07+ 14.46= 24.53 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.: SURFACE WATER TABLE A Bi-1-mi-A A k-z-.1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?c-CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.49-- 10.07= 3.42 MW-59-45 20 10:15 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ............

WELL BOTTOM""***"*

0VD T V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.52 ft msl.Actual water elevation was 3.83 ft msl.GZA IWELL ID :1 MW-59-45 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-45 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point 0 MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11886 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 13.90 1 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.42 CABLE CONNECTOR

....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 45.00 14.52 13.90 below-0.62 13:03 TOC 11.48+ 10.73= 22.21 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.'SURFACE WATER TABLE A I-A A r xz-C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?r Ik CABLE ...................

m ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.90-- 11.48= 2.42 MW-59-45 20 13:05 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR .....WELL BOTTOM ........01 v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-59-45 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-45 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11886 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 13.90 1 DATUM DATE NGVD 29 6/8/07 STATIC GROUNDWATER TABLE ELEVATION (FT)2.31 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-.....

...DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR-): MEASURED CABLE LENGTH: 45.00 14.52 13.90 below-0.62 9:39 TOC 11.59 33.34 44.93 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT GROUND..SURFACE WATER .TABLE TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: A U-+HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE .............................

"*A& A..-0r ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.90-- 11.59-- 2.31 MW-59-45 20 9:47 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

WELL BOTTOM...F]LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Estimated ground surface elevation.

GZA IWELL ID:j MW-59-45 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-45 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 77.00 DATUM NGVD 29 MAKE MiniTroll GROUND ELEVATION (FT) 14.52 DATE 7/27/07 PSI CAPACITY 30 CASING ELEVATION (FT) 13.90 SERIAL NUMBER 4432 CASING DIAMETER (INCH) 1 STATIC GROUNDWATER TABLE ELEVATION (FT)3.07 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 45.00 14.52 13.90 below-0.62 11:25 TOC 10.83+ 34.46= 45.29 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND...'

SURFACE WATER.TABLE A U-=-1 A A r 0~q.J C, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CP lllý_ct:k CABLE ....................

[ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.90-- 10.83= 3.07 MW-59-45 20 11:29 I'TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURIý

.................

TRANSDUCER SENSOR ............

WELL BOTTOM ........v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-59-45 0 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-59-68 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11802 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 14.15 DATUM DATE NGVD 29 10/5/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.08 CABLE CONNECTOR

........................

10'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 68.30 14.52 14.15 below-0.37 10:02 TOC 9.62+ 41.49"- 51.11 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m GROUND..SURFACE WATER TABLE A si A C.)A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-i CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.70-- 9.62-= 4.08 MW-58-68 20 10:03 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ..... .......WELL BOTTOM'---, Nf 01 V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.15 ft msl.Actual water elevation was 4.53 ft msl.GZA IWELL ID :1 MW-59-68 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW59-68 1 of 1 41 .001 7869.10 Indian Point V MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 77.00 MAKE MiniTroll GROUND ELEVATION (FT) 14.52 PSI CAPACITY 30 CASING ELEVATION (FT) 14.15 SERIAL NUMBER 11802 CASING DIAMETER (INCH) 1 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DATUM DATE NGVD 29 11/6/06 3.95 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 68.30 14.52 14.15 below-0.37 10:09 TOC 9.75+ 41.28= 51.03 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT r GROUND.SURFACE WATER TABLE A A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C-CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.70-9.75= 3.95 MW59-68 20 10:14 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ...... ......WELL BOTTOM" '.-. -HýV V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 14.15 ft msl.Actual water elevation was 4.40 ft msl.GZA IWELL ID :1 MW59-68 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW59-68 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ MAKE MiniTroll PSI CAPACITY 30 SERIAL NUMBER 8264 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 14.23 1 DATUM DATE NGVD 29 6/11/07 STATIC GROUNDWATER TABLE ELEVATION (FT)3.05 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?68.30 14.52 14.23-0.29 11:30 TOC 11.18+ 56.37= 67.55 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/"'SURFACE WATER TABLE A I--I-A&.A:1~~1 0 On 1-i-Cýb CABLE ......................

C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.23-- 11.18= 3.05 MW59-68 20 11:32 V TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ............

WELL BOTTOM ......v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]: MW59-68 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center\WELL ID SHEET FILE NO.PROJECT LOCATION MW-59 1 of 1 41.0017869.10 I m Indian Point W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13981 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)77.00 14.52 4 DATUM DATE NGVD 29 9/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.25 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?77.00 14.52 below 10:36 GS 11.75+ 14.493-26.243 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND/.SURFACE WATER TABLE A I-A A j 0.=in lý--CABLE .......................

-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.00-- 11.75= 2.25 MW-59 20 10:37 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...... ......WELL BOTTOM ..........

....I T'.A,...V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated ground surface elevation.

Actual ground surface elevation was 14.52 ft msl.Actual water elevation was 2.77 ft mst.GZA IWELL I:1 MW-59 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-60.440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 ISCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11897 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 14.31 12.48 4 DATUM DATE NGVD 29 10/31/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)3.24 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH 200.00 14.31 12.48 below-1.83 9:50 TOC 11.04+TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS M GROUND-!SURFACE WATER TABLE HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Q 21 11-4.V K;A_ý1 , A 0-CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.28-- 11.04-" 3.24 0 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-60 20 9:58 PRESSURE .................

TRANSDUCER SENSOR ............

WELL BOTTOM ...............

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 12.48 ft mal.Actual water elevation was 1.44 ft msl.Actual test start time 9:58. Daylight savings time not yet set on transducer.

Transducer clock reads 10:58.GZA IWELL ID :1 MW-6O TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-60 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11897 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 14.31 12.48 4 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.24 CABLE CONNECTOR

.......................

10 'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH 200.00 14.31 12.48 below-1.83 14:02 GS 11.76+ 35.69= 47.45 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4 GROUND.SURFACE WATER TABLE TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: A I--,I-A-'-I C, A 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE ..................

[ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.00-- 11.76=- 2.24*MW-60 20 14:08 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.

..................

TRANSDUCER SENSOR ..... .......WELL BOTTOM ........LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated ground surface elevation.

Actual ground surface elevation was 14.31 ft msl.Actual water elevation was 2.55 ft msl.GZA IWELLID :1 MW-60 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-60 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11897 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 14.31 12.48 4 DATUM DATE NGVD 29 1/16/07 2.25 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH 200.00 14.31 12.48 below-1.83 11:42 TOC 10.23 35.36 45.59 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F GROUND: SURFACE WATER TABLE A I-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+I~,.1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CP CABLE .......................

"4: ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

12.48-- 10.23-- 2.25 MW-60 20 11:44 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR .....WELL BOTTOM ........0ý v'V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID] MW-60 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-60 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point 0 MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11897 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 14.31 12.48 4 DATUM DATE NGVD 29 4/13/07 STATIC GROUNDWATER TABLE ELEVATION (FT)2.55 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR----...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?200.00 14.31 12.48 below-1.83 9:20 TOC 9.93+ 37.60-47.53 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS f GROUND.SURFACE A 1-v.A A WATER TABLE.................

1,. ýý 7 0 C, CP CABLE ...................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

12.48-- 9.93= 2.55 MW-60 20 9:22 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ...... ......WELL BOTTOM ...........

ý0 v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-60 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-61 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11984 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 14.00 (estimated) 4 DATUM DATE NGVD 29 1/4/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.20 CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 200.00 (estimated) 14.00 below 13:03 GS FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4 GROUND: SURFACE WATER TABLE+-11.80 30.89 42.69 V A~qJ U HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE ..................

f.........

1.A.1-V ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.00-- 11.80-- 2.20 MW61 packer MW66 1 13:08 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ..........

WELL BOTTOM-- ...........

K LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated ground surface elevation.

Actual ground surface and casing elevations are unknown.This test was intended to log potential communication between mw6l and mw66 during packer testing of mw66.GZA IWELL'I :I MW-61 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-62-38 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point 0 MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15843 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)38.00 14.69 12.81 DATUM DATE NGVD 29 10/12/06 STATIC GROUNDWATER TABLE ELEVATION GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)1.36 CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 38.00 14.69 12.81 below-1.88 10:14 TOC 12.01+ 13.477= 25.487 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE A A A F C.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?90=CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.37-- 12.01= 1.36 MW-62-38 20 10:15 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR...........

TRANSDUCER SENSOR ............

WELL ROTTOM ...0 V F LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 12.81 ft msl.Actual water elevation is 0.80 ft msl.GZA IWELL ID ] MW-62-38 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID mw-62-201 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of i NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11984 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)201.00 14.69 12.82 6 DATUM DATE NGVD 29 10/12/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.14 CABLE CONNECTOR-.....

...DEPTH TO BOTTOM;GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -I: MEASURED CABLE LENGTH: 201.00 14.69 12.82 below-1.87 10:04 TOC 11.71+ 37.433= 49.143 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND...'

SURFACE WATER TABLE ac-A..A xz-C-)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?.H--CABLE ..................

........ *ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.85-- 11.71= 2.14 MW-62-201 20 10:05 TEST NAME: LOGGING INTERVAL: TEST START TIME:

..................

TRANSDUCER SENSOR ..........

V WELL BOTTOM"---

... ., V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation is 12.82 ft msl.Actual water elevation is 1.11 ft msl.GZA IWELL ID :1 MW-62-201 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORM 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-62-201 1 of 1 41.0017869.10 Indian Point W MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11984 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)201.00 14.69 12.82 6 DATUM DATE NGVD 29 10/12/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)1.02 CABLE CONNECTOR

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 201.00 14.69 13.13 below-1.56 13:08 TOC 12.11+ 28.550= 40.660 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT r GROUND-"'SURFACE WATER TABLE A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: xz-C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C-CABLE ..................

11=1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.13-- 12.11-1.02 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-62-201 20 13:10 PRESSURE.TRANSDUCER SENSOR ...............

WELL BOTTOM .............

0 V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Water elevation referenced to estimated casing elevation.

Actual casing elevation is 12.82 ft Msl.Actual water elevation is 0.71 ft msl.GZA IWELL ID :] MW-62-201 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-62-201 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ MAKE MiniTroll PSI CAPACITY 30 SERIAL NUMBER 11984 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)201.00 14.69 12.82 6 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)3.10 CABLE CONNECTOR

.................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 201.00 14.69 13.13 below-1.56 13:44 TOC 10.03+ 30.590-- 40.620 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4 GROUND.SURFACE WATER TABLE A 3-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: oq HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I-CABLE ..............................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.13-- 10.03= 3.10 MW-62-201 20 13:45 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...

TRANSDUCER SENSOR ............

WELL BOTTOM ' ...... ............

0, V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Water elevation referenced to estimated casing elevation.

Actual casing elevation is 12.82 ft msl.Actual water elevation is 2.79 ft msl.GZA IWELL ID] MW-62-201 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK OCient WELL ID MW-62-201 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 9411 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)201.00 14.688 12.820 6 DATUM DATE NGVD 29 2/19/07 STATIC GROUNDWATER TABLE ELEVATION (FT)0.38 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 201.00 14.688 12.820 below-1.87 8:20 TOC 14.31+ 9.388= 23.698 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND-SURFACE WATER TABLE.A ac-1-4-A A xz-C)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I CABLE ...................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.69-- 14.31= 0.38 MW-62-201 20 8:22 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..........

TRANSDUCER SENSOR ..........

OýIt WELL BOTTOM ......v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-62-201 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-63-200 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16930 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)201.00 14.178 12.315 6 DATUM DATE NGVD 29 10/30/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning property)-0.14 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 201.00 14.18 12.32 below-1.86 13:22 TOC 12.28 29.79 42.07 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT Ir 4 GROUND: SURFACE air A A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: WATER TABLE+C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE .....................

.1)On=ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

12.14-- 12.28= -0.14 MW-63-200 20 13:25 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR..........

WELL BOTTOM....

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 12.315 ft msl.Actual water elevation was 0.04 ft msl.GZA IWELL ID ] MW-63-200 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-63 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16930 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)201.00 14.178 12.315 6 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.21 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 201.00 14.18 12.32 below-1.86 13:43 GS 11.79+ 30.60-42.39 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 9 U r GROUND.SURFACE WATER TABLE A Bic-xz-A r A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I.CABLE .......................

"*a ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.00-- 11.79= 2.21 MW-63 20 13:47 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ......WELL BOTTOM ...........

F V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated ground surface elevation.

Actual ground surface elevation was 14.178 ft msl.Actual water elevation was 2.39 ft msl.GZA IWELL ID :] MW-63 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-63-200 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16930 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)201.00 14.178 12.315 6 DATUM DATE NGVD 29 1/2/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)1.40 CABLE CONNECTOR

.......................

IN'DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 201.00 14.18 12.32 below-1.86 12:41 GS 12.60+ 33.35=- 45.95 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-SURFACE WATER .TABLE CABLE .....................

A A UýHAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-n ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.00-- 12.60-1.40 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-63-200 20 13:25 PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM .........V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated ground surface elevation.

Actual ground surface elevation was 14.178 ft msl.Actual water elevation was 1.58 ft msl.GZA, IWELL ID:I MW-63-200 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-63-200 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16930 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)201.00 14.178 12.315 6 DATUM DATE NGVD 29 4/13/07 STATIC GROUNDWATER TABLE ELEVATION (FT)1.73 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

...................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (4 OR -): MEASURED CABLE LENGTH: 201.00 14.178 12.315 below-1.86 10:49 TOC 10.59+ 33.66= 44.25 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..-SURFACE WATER.TABLE A x--A-'-I 0 r HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .............................

A&I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

12.315-- 10.59-- 1.725 MW-63-200 20 13:25 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ............

WELL BOTTOM .......... H LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: MW-63-200 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-65-48 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 82.50 DATUM NGVD 29 MAKE MiniTroll GROUND'ELEVATION (FT) 69.72 DATE 12/15/06 PSI CAPACITY 30 CASING ELEVATION (FT) 68.86 SERIAL NUMBER 15214 CASING DIAMETER (INCH) 4 STATIC GROUNDWATER TABLE ELEVATION (FT)34.42 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 48.00 69.72 68.86 below-0.86 11:22 GS 35.30+ 11.540= 46.840 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND/.SURFACE WATER .TABLE A A A.J C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?=I-CABLE ...............

I.........

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

69.72-- 35.3034.42 MW-65-48 20 11:24 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..........

WELL BOTTOM ...........

v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-65-48 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-65-48 I oft1 41.0017869.10 I I Indian Point 1=Iwv MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15214 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)82.50 69.72 68.86 4 DATUM DATE NGVD 29 12/18/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)30.31 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 48.00 69.72 68.86 below-0.86 10:38 TOC 38.60+ 2.431=- 41.031 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS.4 GROUND-" SURFACE WATER TABLE zz-A A A r~..1 C, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CI-CABLE ..........................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

68.91-- 38.60-" 30.31 MW-65-48 20 10:39 v TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..........

TRANSDUCER SENSOR..........

WELL BOTTOM.....

F LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE TOP OF CASING NOTES: GZA IWELL ID :1 MW-65-48 ITRANSUUCER INTIALLATIOIN LOG(GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-65-48 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15214 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)82.50 69.72 68.86 4 DATUM DATE NGVD 29 4/4/07 STATIC GROUNDWATER TABLE ELEVATION (FT) *37.69 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 48.00 69.72 68.86 below-0.86 8:25 TOC 31.10+ 15.642= 46.742 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER TABLE zz-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?A V r A C-)A CABLE .............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

68.79-- 31.10= 37.69 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-65-48 20 8:31 PRESSURE.TRANSDUCER SENSOR ............

WELL BOTTOM'............

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to casing elevation in error. Actual casing elevation is 88.856 ft msl.Actual water elevation is 37.76 ft msl.GZA IWELL ID :1 MW-65-48 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-65 1 of 1 41.0017869.10 1 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15214 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)82.50 70.26 69.72 4 DATUM DATE NGVD 29 9/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)34.30 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 82.50 70.26 69.72 below-0.54 10:08 GS 35.70+ 13.561-49.261 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT GROUND.SURFACE WATER TABLE ac-l-I-A.A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: J 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check'I-CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 35.70= 34.30 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-65 20 1009 PRESSURE.

.............

TRANSDUCER SENSOR .............

WELL BOTTOM .................

0. *V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Water elevation referenced to estimated ground surface elevation.

Actual ground surface elevation is 70.26 ft msl.Actual water elevation is 34.56 ft msl.GZA IWELLID :1 MW-65 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-65 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER in-Situ MiniTroll 30 15214 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)82.50 70.26 69.72 4 DATUM DATE NGVD 29 10/30/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)34.82 CABLE CONNECTOR

............

10-DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 82.50 70.26 69.72 below-0.54 14:02 TOC 33.34+ 13.622= 46.962 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND: SURFACE WATER .TABLE RA I-A-I.'0 A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?Ci CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

68.16-- 33.34-34.82 MW-65 20 14:02 TEST NAME: LOGGING INTERVAL: TEST START TIME:

............

TRANSDUCER SENSOR ..........

WELL BOTTOM ........L V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation is 69.72 ft msl.Actual water elevation is 36.38 ft msl.GZA IWELL ID :1 MW-65 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORN 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS: Client WELL ID Entergy SHEET Indian Point Energy Center FILE NO.PROJECT LOCATION MWV-65 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15214 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)82.50 70.26 69.72 4 DATUM DATE NGVD 29 11/7/06 STATIC GROUNDWATER TABLE ELEVATION (FT) *41.60 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -I: MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?82.50 70.26 69.72 below-0.54 14:51 GS 28.40+ 12.650= 41.050 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r___ a 4 GROUND./SURFACE WATER.TABLE A I--1-A A xz-~~1 0 I CABLE ..............................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

70.00-- 28.40-41.60 MW-65 20 14:52 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ............

WELL BOTTOM-....

T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated ground surface elevation.

Actual ground surface elevation is 70.26 ft msl.Actual water elevation is 41.86 ft mst.GZA IWELL ID:1 MW-65 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-65 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 ISCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15214 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)82.50 70.26 69.72 4 DATUM DATE NGVD 29 11/22/06 STATIC GROUNDWATER TABLE ELEVATION (FT) *33.85 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 82.50 70.26 69.72 below-0.54 10:32 TOC 34.07+ 13.112=- 47.182 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT r GROUND." SURFACE TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: WATER TABLE xz--DEPTH TO WATER: ACTUAL DEPTH: ITHEORETICAL CABLE LENGTH: A.BI-P--V.A.A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

67.92-- 34.07-33.85 FT M.S.L.FT FT M.S.L.MIN HRS~~1 C-, I)I-C TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-65 20 10:36 PRESSURE .................

TRANSDUCER SENSOR ...... ......WELL BOTTOM ..........

4'V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation is 69.72 ft msl.Actual water elevation is 35.65 ft msl.GZA IWELL ID :] MW-65 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-66-21 1 of 1 41.0017869.10 I m Indian Point W I MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15849 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)37.00 14.122 13.407 2 DATUM DATE NGVD 29 7/27/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)-0.04 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?21.00 14.122 13.407 below-0.72 17:41 TOC 13.32+ 7.27=- 20.59 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS F GROUND: SURFACE WATER TABLE A A A.4-)CABLE .............................

C 4 am ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.281-- 13.32= -0.039 MW-66-21 20 17:45 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ............

WELL BOTTOM...It V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 13.407 ft msl.Actual water elevation was 0.087 ft msl.Observable product in well.GZA IWELL ID :] MW-66-21 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-66-36 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11840 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)37.00 14.122 13.367 1 DATUM DATE NGVD 29 7/27/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)1.54 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?36.00 14.122 13.367 below 11:52 TOC 11.77+ 14.54-= 26.31 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS CABLE CONNECTOR

..............

GROUND/SURFACE WATER .TABLE A A A z-7..0 ci CABLE ...................

[.ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.311-- 11.77= 1.541 MW-66-36 20 11:56 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR. ..............

TRANSDUCER SENSOR ..........

WELL BOTTOM .............

1V V LEGEND: DTW -DEPTH TO WATER DTIB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 13.364 ft msl.Actual water elevation was 1.591 ft msl.GZA IWELL I:1 MW-66-36 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-66 1 of 1 41.0017869.10 4 m Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6097 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 14.021 12.155 4 DATUM DATE NGVD 29 1/25/07 STATIC GROUNDWATER TABLE ELEVATION (FT)1.73 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH 200.00 14.021 12.155 below-1.87 8:15 TOC 10.43+ 37.97= 48.40 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-SURFACE WATER TABLE A A A I ,C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-=CABLE ....................

"1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

12.155-- 10.43-" 1.725 MW-66 20 11:44 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.........

TRANSDUCER SENSOR ............

WELL BOTTOM ......0ý v v v J .LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] MW-66 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-66 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6097 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 14.021 12.155 4 DATUM DATE NGVD 29 3/7/07 STATIC GROUNDWATER TABLE ELEVATION (FT)-0.63 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH 200.00 14.021 12.155 below-1.87 9:49 TOC 12.78+ 35.45= 48.23 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.:'SURFACE WATER.TABLE A A A xz--Il C-HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-CABLE ...................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

12.155-- 12.78= -0.625 MW-66 20 9:31 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURFE..........

TRANSDUCER SENSOR ......WELL BOTTOM ...............

V F v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-66 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-66 1 of 1 41.0017869.10

.4 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6097 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)200.00 14.021 12.155 4 DATUM DATE NGVD 29 4/13/07 STATIC GROUNDWATER TABLE ELEVATION (FT)2.06 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------....

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?200.00 14.021 12.155 below-1.87 10:01 TOC 10.10 38.34 48.44.-I FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND,.SURFACE WATER TABLE.A I-A-J 0 A c-CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

12.155-- 10.10-2.055 MW-66 20 10:01 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR..........

TRANSDUCER SENSOR ..... ......WELL BOTTOM--" v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID I MW-86 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK client WELL ID MW-107 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5746 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)37.90 140.061 142.757 2 DATUM DATE NGVD 29 6/19/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)115.58 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 37.90 140.061 142.757 above 2.696 10:58 TOC 24.48+ 0.861-25.341 F F FT T M.S.L.T M.S.L.FT FT HRS FT FT FT CABLE CONNECTOR

........................

I TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 4 GROUND.-SURFACE WATER TABLE CABLE ....................

A A U HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check II ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

140.061-- 24.48 115.581 MW-107 20 11:03 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR..........

WELL BOTTOM ...v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-107 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEW YORK, NEW YORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-107 1 of 1 41.0017869.10 Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5746 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)37.90 140.061 142.757 2 DATUM DATE NGVD 29 10/10/06 STATIC GROUNDWATER TABLE ELEVATION (FT)116.19 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR....

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 37.90 140.061 142.757 above 2.696 14:51 TOC 26.61+ -0.031= 26.579 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT GROUND..: SURFACE WATER TABLE ac-.1ýA A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: zz-~qJ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CP CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

142.800-- 26.61= 116.190 MW-107 20 14:52 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

..................

TRANSDUCER SENSOR ......WELL BOTTOM ......T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-107 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-107 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5746 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)37.90 140.061 142.757 2 DATUM DATE NGVD 29 11/14/06 120.01 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 37.90 140.061 142.757 above 2.696 11:42 TOC 22.79+ 2.548= 25.338 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT I GROUND..SURFACE WATER TABLE ac-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:~~1 U HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

142.800-- 22.79= 120.010 MW-1 07 20 11:51 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR .....WELL BOTTOM....

v V LEGEND: OTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA [WELL IO:1 MW-107 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-107 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER

.In-Situ FINAL BORING DEPTH (FT) 37.90 DATUM NGVD 29 MAKE MiniTroll GROUND ELEVATION (FT) 140.061 DATE 3/13/07 PSI CAPACITY 30 CASING ELEVATION (FT) 142.757 SERIAL NUMBER 5746 CASING DIAMETER (INCH) 2 STATIC GROUNDWATER TABLE ELEVATION (FT)118.34 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 37.90 140.061 142.757 above 2.696 14:06 TOC 24.42+ 13.563"" 37.983 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS.4 GROUND.:'SURFACE A A WATER TABLE-qJ C-)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?==P CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

142.757-- 24.42= 118.337 MW-107 20 14:06 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E.

TRANSDUCER SENSOR ...........

WELL BOTTOM ........v v'LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer cable replaced, transducer re-calibrated and time re-set for DST.GZA IWELL ID :I MW-1O7 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-107 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5746 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)37.90 140.061 142.757 2 DATUM DATE NGVD 29 4/2/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)118.95 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?37.90 140.061 142.757 above 2.696 16:50 TOC 23.81+ 14.061= 37.871 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r GROUND.: SURFACE WATER TABLE x-7 CABLE ........................

"0 A C.)0 A ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

142.757-- 23.81= 118.947 MW-107 20 16:54 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR.WELL BOTTOM .................

v'LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-107 TRANSDUCER INSTALLATION LOCG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-108 1 oft1 41.0017869.10 I Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 20738 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)11.90 14.480 14.230 DATUM DATE NGVD 29 6/30/06 STATIC GROUNDWATER TABLE ELEVATION (FT)9.58 GZA ENGINEER S.Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFEIRENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -I: MEASURED CABLE LENGTH: 11.90 14.480 14.230 below-0.250 9:38 TOC 4.65+ 5.751= 10.401 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE A A 311 A ,C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ci-CABLE .................

.............

1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.230-4.65= 9.580 MW-108 20 9:40 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURý ..................

TRANSDUCER SENSOR ............

WELL BOTTOM-.........

j v v LEGEND: D'W -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] MW-108 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-108 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of i NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 20738 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)11.90 14.48 14.23 4 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)9.13 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.90 14.48 14.23 below-0.25 9:01 TOC 5.10+ 5.34"- 10.44 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L..FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.." SURFACE WATER TABLE BI-!-.A&A v_;j 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?On CABLE ........................

0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.23-5.10= 9.13 MW- 108 20 9:06 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..... .....WELL BOTTOM.....

v.......................................

........a..v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-108 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-108 1 oft1 41.0017869.10 4 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 20738 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)11.90 14.48 14.23 4 DATUM DATE NGVD 29 3/28/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)9.74 CABLE CONNECTOR

.....DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.90 14.48 14.23 below-0.25 14:17 TOC 4.49 6.21 10.70 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT v-a GROUND..." SURFACE A A.A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: WATER TABLE xz-+-41 C-J HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I-90ýCABLE .......................

10:1 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.23-- 4.49= 9.74 MW- 108 20 14:20 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ....... ......WELL BOTTOM ......V'v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID] MW-108 TRANSDUCER INSTALLATION Luc GZA GEOENVIRONMCNTAL OF NEW YORK Client WELL ID MW-108 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 20738 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)11.90 14.48 14.23 4 DATUM DATE NGVD 29 5/29/07 STATIC GROUNDWATER TABLE ELEVATION (FT)9.99 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR------....

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR-): MEASURED CABLE LENGTH: 11.90 14.48 14.23 below-0.25 10:43 TOC TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+4.24 6.43 10.67 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS v GROUND:." SURFACE WATER TABLE CABLE ......................

I..-J 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?On 11=ý.C--ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.23-- 4.24= 9.99 MW-108 20 10:45 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR............

WELL BOTTOM--"', 0, V LEGEND: DT`W -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer cable replaced.GZA IWELL ID :1 MW-108 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-109 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11949 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)11.65 14.554 14.254 2 DATUM DATE NGVD 29 6/14/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)8.62 CABLE CONNECTOR

.....DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.65 14.554 14.254 below-0.300 13:07 TOC 5.63+ 4.929=- 10.559 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS___ U GROUND.SURFACE WATER TABLE A I-A A F O~HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-C CABLE ...................

I ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.25-- 5.63= 8.62 MW-109 20 13:12 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM .............

fl H v...................................................

..........

a..LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-109 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-109 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017889.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11949 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)11.65 14.554 14.254 2 DATUM DATE NGVD 29 6/28/06 9.57 STATIC GROUNDWATER TABLE ELEVATION (Fr)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

....*.-.---...........-

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.65 14.554 14.254 below-0.300 10:39 TOC 4.68 4.929 9.609 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+-FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND" SURFACE WATER TABLE z-7 ac-IF A.qJ 0 A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..................

[C 41 C-C ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.25-- 4.68"" 9.57 MW-109 20 10:41 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..............

TRANSDUCER SENSOR ............

WELL BOTTOM ............

7 v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-109 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-109 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11949 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)11.65 14.554 14.254 2 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.47 CABLE CONNECTOR

................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.65 14.554 14.254 below-0.300 9:48 TOC 6.78 3.87 10.65 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F GROUND/: SURFACE WATER TABLE A I-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+~qJ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I-90ýCABLE ... .........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.25-- 6.78=- 7.47 MW- 109 20 9:52 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ..........

WELL BOTTOM .......If v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 MW-109 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-109 440 NINTH AVENUE, 18th FLOOR Entergy SHEET t of1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11949 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)11.65 14.554 14.254 2 DATUM DATE NGVD 29 3/27/07 STATIC GROUNDWATER TABLE ELEVATION (FT)9.02 GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?11.65 14.554 14.254 below-0.300 14:43 TOC 5.23+ 6.39-" 11.62 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r GROUND..SURFACE WATER TABLE A A.A z--C I.CABLE .......................

0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.25-- 5.23= 9.02 MW-109 20 15:08 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ......WELL BOTTOM....

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-109 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-109 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11949 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)11.65 14.554 14.254 2 DATUM DATE NGVD 29 5/10/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)6.63 CABLE CONNECTOR-----

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 11.65 14.554 14.254 below-0.300 13:16 TOC 7.62+ 4.11"- 11.73 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4-.GROUND.-SURFACE A I-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: WATER TABLE 4,.1 U HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I-CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.254-7.62=" 6.634 MW-109 20 13:17 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ............

WELL BOTTOM ...........

V v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer cable replaced.GZA IWELL ID :1 MW-109 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-111 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6767 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)17.70 18.93 18.38 2 DATUM DATE NGVD 29 6/20/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)10.27 CABLE CONNECTOR

..........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH.TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?17.70 18.93 18.38 below-0.55 10:17 GS 8.83+ 7.620= 16.450 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r GROUND.SURFACE WATER .TABLE BI--I=.A A xz-J C-)I-i CABLE .....................

<: ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

19.10-- 8.83= 10.27 TEST NAME: LOGGING INTERVAL: TEST START TIME: MW-111 20 10:21 PRESSUR.E

.................

TRANSDUCER SENSOR ..........

WELL BOTTOM ..............

I,'H V V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated ground surface elevation.

Actual ground surface elevation was 18.93 ft msl.Actual water elevation was 10.10 ft msl.GZA IWELL ID:1 MW-111 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION MW-ill 1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6767 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)17.70 18.93 18.38 2 DATUM DATE NGVD 29 7/13/06 STATIC GROUNDWATER TABLE ELEVATION (FT)11.75 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR-): MEASURED CABLE LENGTH: 17.70 18.93 18.38 below-0.55 11:39 TOC 6.63+ 7.620= 14.250 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS CABLE CONNECTOR

........................

GROUND-SURFACE A WATER TABLE................

1. ýS7 I A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

0 1K A C-v ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.380-- 6.63= 11.750 MW-111 20 11:42 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...... ......WELL BOTTOM ................

F LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer cable replaced.GZA IWELL ID :1 MW-111 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-111 440 NINTH AVENUE, 18th FLOOR Entergy SHEET l of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6767 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)17.70 18.93 18.38 2 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER Sara Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)10.02 CABLE CONNECTOR

........................

I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?17.70 18.93 18.38 below-0.55 14:34 GS 9.08+ 6.20= 15.28 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS IF GROUND: SURFACE WATER TABLE CABLE .....................

PRESSURE TRANSDUCER SENSOR ..........

WELL BOTTOM .......a-1-i-A-"a U A CP ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

19.10-- 9.08= 10.02 MW-111 20 14:38 TEST NAME: LOGGING INTERVAL: TEST START TIME: LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated ground surface elevation.

Actual ground surface elevation was 18.93 ft msl.Actual water elevation was 9.30 ft msl.GZA IWELL ID:1 MW-111 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID MW-111 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6767 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)17.70 18.93 18.38 DATUM DATE NGVD 29 2/20/07 8.99 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): 17.70 18.93 18.38 below-0.55 8:42 TOC 9.40+ 5.11-14.51 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE A Ri-ll-F A A C..HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?-i-CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.39-- 9.40= 8.985 MW-111 20 8:44 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR.WELL BOTTOM ..............

iv v LEGEND: DTI -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID : MW-il TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK IClient WELL ID MW-111 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6767 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)17.70 18.93 18.38 DATUM DATE NGVD 29 4/4/07 9.78 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?17.70 18.93 18.38 below-0.55 9:14 TOC 8.60+ 6.83= 15.43 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r¶ U ~GROUND.SURFACE WATER TABLE A Bi--I-11 A~~1 0 A c-CABLE ...................

I ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.38-- 8.60= 9.780 MW-111 20 9:15 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .TRANSDUCER SENSOR .......WELL BOTTOM.. .H I,-'v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 MW-111 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION N Curtain Drain 1 Of 1 41.0017869.10

/Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11992 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)33.00 36.00 2 DATUM DATE NGVD 29 10/4/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)29.33 CABLE CONNECTOR

........DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 33.00 36.00 above 3.00 11:44 TOC 6.67+ 1.60= 8.27 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER.TABLE A A A Ir z\7 ,4.1 0.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?=I-CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

36.00-6.67=- 29.33 N Curtain Drain 20 14:46 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR...........

TRANSDUCER SENSOR............

WELL BOTTOM ...........

Li v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID I N Curtain Drain TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID N Curtain Drain 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11992 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)33.00 36.00 2 DATUM DATE NGVD 29 10/26106 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)24.25 CABLE CONNECTOR

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?33.00 36.00 above 3.00 9:13 GS 8.75 0.79 9.54+FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE A I--I A-pa C-).A-.5-.1P CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

33.00-- 8.75= 24.25 TEST NAME: LOGGING INTERVAL: TEST START TIME: N Curtain Drain 20 9:17 PRESSURFE..........

TRANSDUCER SENSOR ...... ......WELL BOTTOM ......0: LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 N Curtain Drain TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION_N Curtain Drain 1 of 1 41.0017869.10

/Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11992 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)33.00 36.00 2 DATUM DATE NGVD 29 4/30107 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)27.17 CABLE CONNECTOR....

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 33.00 36.00 above 3.00 13:08 TOC 8.83+ 0.66= 9.49 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT 4-, GROUND...'

SURFACE WATER.TABLE Ri l-I-A ,A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: J C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check.I--CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

36.00-- 8.83"- 27.17 N Curtain Drain 20 13:21 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ...........

TRANSDUCER SENSOR .....WELL BOTTOM....

0 T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 N Curtain Drain TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID OUT-1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 18661 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)8.19 11.91 2 DATUM DATE NGVD 29 6/16/06 STATIC GROUNDWATER TABLE ELEVATION (FT)4.69 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

1 DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 8.19 11.91 above 3.72 14:47 TOC 7.22+ 17.375= 24.595 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER.TABLE A I--I-L A k..1 0.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.91-- 7.22= 4.69 OUT-1 20 14:50 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR.WELL BOTTOM....

v'Yr LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] OUT-i TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION OUT-1 1 of 1 41.0017869.10 Indian Point I I l1w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4406 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)8.19 11.91 2 DATUM DATE NGVD 29 7/14/06 STATIC GROUNDWATER TABLE ELEVATION (FT)2.98 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 8.19 11.91 above 3.72 10:30 TOC 8.93+ 10.212= 19.142 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND...'

SURFACE F-I A A v WATER TABLE.................

1. [ K;7 C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ...................

I ,<*.1)C0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.91-- 8.93= 2.98 OUT-1 20 10:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ........WELL BOTTOM-........

0 v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 OUT-1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID OUT-1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16346 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)8.19 11.91 2 DATUM DATE NGVD 29 11/21/06 STATIC GROUNDWATER TABLE ELEVATION (FT)2.21 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR -): MEASURED CABLE LENGTH: 8.19 11.91 above 3.72 14:33 TOC 9.70+ 1.760= 11.460 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS*1* ~U*GROUND..SURFACE WATER TABLE xz-7 I-1 A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..............................

10-A V ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.91-- 9.70= 2.21 OUT-1 20 14:34 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURK ..................

TRANSDUCER SENSOR WELL BOTTOM--`-

..........-..

LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 OUT-1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID OUT-1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 16346 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)8.19 11.90 2 DATUM DATE NGVD 29 4/10/07 STATIC GROUNDWATER TABLE ELEVATION (FT)2.09 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 8.19 11.90 above 3.71 14:23 TOC 9.81+ 1.736= 11.546 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE ac-F-1 A WATER TABLE v................

.ýý 7 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ..............................

A.I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.90-- 9.81= 2.09 OUT-1 20 14:30 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE .................

TRANSDUCER SENSOR ............

WELL BOTTOM .........Fl v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] OUT-1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID OUT-1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 11952 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)8.20 11.89 2 DATUM DATE NGVD 29 9/20/07 STATIC GROUNDWATER TABLE ELEVATION (FT)4.61 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: 8.20 11.89 above 3.69 18:28 TOC 7.28+ 4.635=- 11.915 DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND/:'SURFACE WATER TABLE I-i.A A xz-v-Il 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I, CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

11.891-- 7.280-4.611 OUT-1 20 18:34 , 0 *TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM ..............

v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Transducer and cable were replaced.GZA IWELL ID ] OUT-1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION SPHERE FOUNDATION SUMP -Ul 1 of 1 41.0017869.10 Indian Point w I I -MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER GZA ENGINEER In-Situ MiniTroll 30 14114 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.00 17.02 2 DATUM DATE NGVD 29 10/4/06 STATIC GROUNDWATER TABLE ELEVATION (FT)9.35 A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR'...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 14.00 17.02 above 3.02 14:18 TOC 7.65+ 2.08-" 9.73 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.SURFACE WATER TABLE A ac-llýA A-..HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CR CABLE .........................

11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.00-- 7.65"" 9.35 SUmp 20 14:21 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ............

WELL BOTTOM .................

If v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELLID ID Sump TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID SPHERE FOUNDATION SUMP -Ul 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 14114 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.00 17.02 2 DATUM DATE NGVD 29 4/30/07 STATIC GROUNDWATER TABLE ELEVATION (FT)10.00 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (÷ OR -): MEASURED CABLE LENGTH: 14.00 17.00 above 3.00 13:27 TOC 7.00+ 2.73= 9.73 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.., SURFACE WATER TABLE a-I A A C.1)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I.0 CABLE ........................ "l, ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.00-- 7.00= 10.00 SUmp 5 13:30 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.E

.............

TRANSDUCER SENSOR ...........

WELL BOTTOM...'Ii,.........................................................................

A v'LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 Sump TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U2-C1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of I NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ Minitroll 30 11885 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)NA 12.05 15.05 2 DATUM DATE NGVD 29 8/7/06 ST1AIC GURUNDWAITER IABLE -L-VAIIOI GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

N (I-1)6.16 DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?NA 12.05 15.05 above 3.00 10:28 TOC 8.89 5.44 14.33+FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND: SURFACE WATER TABLE-1-A A r o=.CIO 1-i-lll:ýh CABLE .......................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.05-- 8.89= 6.16 SW-4 20 10:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..............

WELL BOTTOM"'--

'""..........

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]: U2-C1 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U2-C1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ Minitroll 30 11885 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)NA 12.05 15.05 2 DATUM DATE NGVD 29 8/8/06 6.18 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER -ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: NA 12.05 15.05 above 3.00 8:13 TOC 8.87+ 4.52=- 13.39 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS I HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?GROUND...'

SURFACE WATER .TABLE CABLE ......................

PRESSURJ ..................

TRANSDUCER SENSOR ...........

WELL BOTTOM*..

..............

A I-A A C : ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.05-- 8.87-= 6.18 SW-4 20 10:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: 0, V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL I:I U2-C1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK !Client WELL ID U2-C1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ LevelTroll 30 105805 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)NA 12.05 15.05 2 DATUM DATE NGVD 29 9/28/06 STATIC GROUNDWATER TABLE ELEVATION (FT)4.25 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: NA 12.05 15.05 above 3.00 8:20 TOC 10.80+ 4.07= 14.87 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.." SURFACE WATER.TABLE L A-I-v C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?.-CABLE ....................... ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.05-- 10.80= 4.25 SW-4 20 8:27 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ......WELL RBTTnM...7ý0 v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] U2-C1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U2-C1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ LevelTroll 30 105805 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)NA 12.05 15.05 2 DATUM DATE NGVD 29 1/18/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.01 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: NA 12.05 15.05 above 3.00 15:14 TOC 12.90+ 2.62= 15.52 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS ,- U-GROUND..SURFACE WATER TABLE A 9:-1 A A m HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I-=CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.91-- 12.90= 2.01 SW-4 20 15:16 V TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ...... .....WELL BOTTOM ...........

V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to casing elevation in error. Actual casing elevation was 15.05 ft msl.Actual water elevation was 2.15 ft msl.GZA IWELL ID :1 U2-Cl TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U2-C1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of I NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ LevelTroll 30 112545 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)NA 12.05 15.05 2 DATUM DATE NGVD 29 4/12/07 STATIC GROUNDWATER TABLE ELEVATION (FT)3.97 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: NA 12.05 15.05 above 3.00 10:41 TOC 11.08 4.46 15.54 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT F GROUND...'

SURFACE WATER TABLE TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:+A I4-.I-A A ,4.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check.IP-CABLE ......................

..ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

15.05-- 11.08-- 3.97 SW-4 1 10:44 FT M.S.L.FT FT M.S.L.TEST NAME: LOGGING INTERVAL: TEST START TIME: MIN HRS PRESSURE .................

TRANSDUCER SENSOR ..........

WELL BOTTOM"............

K v F LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] U2-Cc TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-4D 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3302 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)27.25 14.819 14.519 4 DATUM DATE NGVD 29 6/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.20 CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?27.25 14.819 14.519 below-0.300 13:32 TOC 10.32+ 11.793=- 22.113 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND-SURFACE WATER TABLE A A A.J 0.CP=.1l-ýCABLE ..............................

0 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.519-- 10.32= 4.199 U-3-4D 20 13:33 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR .....WELL BOTTOM .......V v V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID] U3-4D TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-4D 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3302 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.849 14.519 4 DATUM DATE NGVD 29 6/28/06 STATIC GROUNDWATER TABLE ELEVATION (FT)6.68 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR....

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 0.00 14.849 14.519 below-0.330 11:10 TOC 7.84+ 11.793" 19.633 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS i U r GROUND: SURFACE WATER TABLE A I-i A A v ,qJ 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CIO CABLE ...............................

0 I=-it ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.519-- 7.84= 6.679 U-3-4D 20 11:12 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM .............

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID]I U3-4D TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-4D 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3302 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.849 14.519 4 DATUM DATE NGVD 29 10/24/06 3.99 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 0.00 14.849 14.519 below-0.330 11:52 TOC 10.53+ 10.893-" 21.423 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS m 4 GROUND, SURFACE WATER TABLE A Bi-=A~~1 C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .....................

A I-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.519-- 10.53-" 3.989 U-3-4D 20 11:54 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR ...........

WELL BOTTOM LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 U3-4D TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-4D 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3302 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.849 14.519 4 DATUM DATE NGVD 29 11/6/06 3.64 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR-): MEASURED CABLE LENGTH: 14.849 14.519 below-0.330 11:52 TOC 10.88+ 10.516= 21.396 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE WATER.TABLE A I-i.A A~~1 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?cim CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.519-- 10.88-3.639 U-3-4D 20 11:13 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ............

WELL BOTTOM ...............

F]H WY v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL I': U3-4D TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-4D 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 3302 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.849 14.519 4 DATUM DATE NGVD 29 1/25/07 STATIC GROUNDWATER TABLE ELEVATION (FT)4.01 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 14.849 14.519 below-0.330 9:18 TOC 10.51+ 11.637= 22.147 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE A I--I-A A If zz-C HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.519-- 10.51" 4.009 U-3-4D 20 9:20.8)I.0 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...... ......WELL BOTTOM...v v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :j U3-4D TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-4D 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 15849 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.849 14.519 4 DATUM DATE NGVD 29 3/28/07 STATIC GROUNDWATER TABLE ELEVATION (FT)3.93 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 14.849 14.519 below-0.330 11:28 TOC 10.59+ 12.082= 22.672 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND.SURFACE WATER TABLE................

a. ý=A Rim I-A F A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?ci-CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.519-- 10.59-- 3.929 U-3-4D 20 11:35 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM.T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Slight coating of product observed on transducer cable.GZA IWELL ID :1 U3-4D TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U3-4S 1 of 1 41 .0017869.10 Indian Point v-I I I MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5185 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)17.35 14.653 13.943 4 DATUM DATE NGVD 29 6/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)4.55 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

..... ..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 17.35 14.653 13.943 below-0.530 13:43 TOC 9.39+ 6.628= 16.018 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS*1~ ~*m GROUND."" SURFACE WATER TABLE ll1-A A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?cio CABLE ........................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.943-- 9.39-4.553 U-4S 20 13:44 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR ..........

WELL BOTTOM .......v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: I GZA IWELL ID :1 U3-4s TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORM 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U3-4S 1 of 1 41.0017869.10 4 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5185 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)17.35 14.653 13.943 4 DATUM DATE NGVD 29 10/4/06 STATIC GROUNDWATER TABLE ELEVATION (FT)3.72 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (4) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 17.35 14.653 13.943 below-0.530 8:12 TOC 10.22+ 6.295-16.515 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT r GROUND..SURFACE WATER TABLE A I-=A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: ,4.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CP CABLE ...............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.943-- 10.22= 3.723 U-4S 20 8:14 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR...........

TRANSDUCER SENSOR....

WELL BOTTOM .....IV v LEGEND: DIW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID 1 u3-4s TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-4S 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5185 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)17.35 14.653 13.943 4 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)4.23 CABLE CONNECTOR

..............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 17.35 14.653 13.943 below-0.530 11:27 TOC 9.71+ 6.228= 15.938 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT GROUND: SURFACE WATER TABLE ac-11 i..A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH:-.'HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check C CABLE .....................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.943-- 9.71= 4.233 U-4S 20 11:29 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE........

TRANSDUCER SENSOR .............

WELL BOTTOM........

Vi v V i.LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID: U3-4s TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U3-4S 1 Of 1 41.0017869.10 Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 5185 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)17.35 14.653 13.943 4 DATUM DATE NGVD 29 3/27/07 4.22 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I÷ OR-): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?17.35 14.653 13.943 below-0.530 13:56 TOC 9.72+ 6.838-- 16.558 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS r 0 GROUND-SURFACE WATER TABLE A I--I-A A-Il C.On CABLE ...................

[ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.943-- 9.72= 4.223 U-4S 20 14:16 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ............

WELL BOTTOM..........

0 T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Slight coating of product observed on transducer cable.GZA IWELLI :I U3-4s TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-4S 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER In-Situ FINAL BORING DEPTH (FT) 17.35 DATUM NGVD 29 MAKE MiniTroll GROUND ELEVATION (FT) 14.653 DATE 5/14/07 PSI CAPACITY 30 CASING ELEVATION (FT) 13.943 SERIAL NUMBER 5185 CASING DIAMETER (INCH) 4 STATIC GROUNDWATER TABLE ELEVATION (FT)4.41 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 17.35 14.653 13.943 below-0.530 11:13 TOC 9.53+ 7.020= 16.550 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS 4 GROUND, SURFACE WATER TABLE Am-1-ýV A~~1 0 A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?O-CABLE ...................

.ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.943-- 9.53-4.413 U-4S 20 11:14 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...... ......WELL BOTTOM ...............

rýV LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:* Slight coating of product observed on transducer cable.GZA IWELL ID:1 U3-4s TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-C1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 6100 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)NA 15.003 18.069 2 DATUM DATE NGVD 29 6/19/06 2.72 STATIC GROUNDWATER TABLE ELEVATION (FT)*GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: NA 15.003 18.069 above 3.066 14:19 TOC 15.05+ 1.440= 16.490 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS M GROUND:": SURFACE WATER.TABLE A A A IF Vz C, HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?On 1-i.-4:11 CABLE ..................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.769-- 15.05-2.719 SW-3 20 14:21 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ............

WELL BOTTOM ................

F" T F LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Water elevation referenced to estimated casing elevation.

Actual casing elevation was 18.069 ft msl.Actual water elevation was 3.019 ft msl.GZA IWELL ID U3-C1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U3-C1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13981 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)NA 15.003 18.069 2 DATUM DATE NGVD 29 1/18107 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)2.45 CABLE CONNECTOR

.........

..........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR-): MEASURED CABLE LENGTH: NA 15.003 18.069 above 3.066 13:53 TOC 15.32+- 0.907-= 16.227 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.SL.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?GROUND..:'

SURFACE WATER TABLE CABLE ......................

PRESSUFR ...............

TRANSDUCER SENSOR....

........WELL BOTTOM ................

C r I-C A A ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

17.769-15.32=- 2.449 TEST NAME: LOGGING INTERVAL: TEST START TIME: U3-C1 20 13:58 v i LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL D:1 U3-C1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U3-C1 I of 1 41.0017869.10 Indian Point I I MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 13981 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)NA 15.003 18.069 2 DATUM DATE NGVD 29 3/6/07 STATIC GROUNDWATER TABLE ELEVATION (FT)1.11 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR......

.... I DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: NA 15.003 18.069 above 3.066 11:14 TOC 16.96+ 2.527" 19.487 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..'SURFACE WATER TABLE A Bic 1-.A A F-" HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?a:=:I-P-CABLE ..............................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

18.069-- 16.96= 1.109 U3-C1 20 11:18 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSUR.K

..................

TRANSDUCER SENSOR....

WELL BOTTOM"...

...........

V'.... .........V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID:1 U3-C1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U-3-1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4839 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)18.35 15.295 13.495 6 DATUM DATE NGVD 29 6/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)4.17 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.......................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 18.35 15.295 13.495 below-1.800 11:36 TOC 9.33+ 6.352= 15.682 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS , U .GROUND-SURFACE WATER.TABLE A A A r zz--pJ HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?I CABLE .....................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.495-- 9.33"- 4.165 U3-1 20 11:37 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.........

TRANSDUCER SENSOR .....WELL BOTTOM ..............

v It v LEGEND: DTIN -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :1 U-3-1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U-3-1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1" NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 416 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)18.35 15.295 13.495 6 DATUM DATE NGVD 29 1/25/07 STATIC GROUNDWATER TABLE ELEVATION (FT)4.01 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR-): MEASURED CABLE LENGTH: 18.35 15.295 13.495 below-1.800 9:04 TOC 9.49+ 7.897= 17.387 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS WATER..TABLE GROUND...:

SURFACE I.-A~~1 C.)CID A CABLE .......................

ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.495-- 9.49= 4.005 U3-1 20 9:04 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE ..................

TRANSDUCER SENSOR ......WELL BOTTOM. ."Oýv v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID ] U-3-1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U-3-1 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 416 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)18.35 15.295 13.495 6 DATUM DATE NGVD 29 3/27/07 STATIC GROUNDWATER TABLE ELEVATION (FT)4.19 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -I: MEASURED CABLE LENGTH: 18.35 15.295 13.495 below-1.800 11:50 TOC 9.31+ 8.699= 18.009 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT Ir___ B/GROUND...'

SURFACE WATER TABLE A I-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: zz-.J C.HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check I-h CABLE ..............................

" ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

13.495-- 9.31= 4.185 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: U3-1 20 11:55**PRESSURE .................

TRANSDUCER SENSOR..........

WELL BOTTOM ......T LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: Small coating of product observed on transducer cable.* Transducer clock synchronized with Rugged Reader in error. Clock was set 12 hrs and 5 min fast. Actual test start time of 11:55 on 3127/08 is displayed in data fih as 0:00 hrs on 3/28/07. This error was corrected and a new test was started on 3/28/07 at 10:45.GZA IWELL ID :1 U-3-1 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS SClient Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U-3-2 1 of 1 41.0017869.10 Indian Point I I mw MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 1226 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.61 14.310 14.114 6 DATUM DATE NGVD129 10/4/06 4.75 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?14.61 14.310 14.114 below-0.20 8:37 TOC 9.36+ 3.897= 13.257 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND..SURFACE A ac-ll:ýA A WATER TABLE zz---" CP 1-i.-4:11 CABLE .......................

"*ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.114-- 9.36= 4.754 U3-2 20 8:39 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ............

WELL BOTTOM....

V v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] U-3-2 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client \WELL ID U-3-2 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 1226 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.61 14.310 14.114 6 DATUM DATE NGVD 29 6/15/06 STATIC GROUNDWATER TABLE ELEVATION (FT)5.12 GZA ENGINEER S. Covelli/A.

Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 14.61 14.310 14.114 below-0.20 11:10 TOC 9.02+ 3.930= 12.950 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND-SURFACE WATER TABLE A Ri-A A F~~1 C.)HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?d-CABLE ........................

10 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.144-- 9.02= 5.124 U3-2 20 11:15 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR ..........

WELL BOTTOM ......LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :I" U-3-2 TRANSDUCER INSTALLATION LOC GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U3-2 1 of 1 41.0017869.10 Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 1226 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.61 14.310 14.114 6 DATUM DATE NGVD 29 11/6.06 STATIC GROUNDWATER TABLE ELEVATION (FT)4.88 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR-------...

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 14.61 14.310 14.114 below-0.20 10:40 TOC 9.23+ 3.86= 13.09 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT Ir GROUND..SURFACE WATER TABLE RIC 1-j-A A TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: o~HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check.I-CABLE ....................

11 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.11-- 9.23= 4.88 U3-2 20 10:42 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURFE........

TRANSDUCER SENSOR ......WELL BOTTOM .................

v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ':I U3-2 0 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client I WELL ID U3-2 440 NINTH AVENUE, 18th FLOOR Entergy SHEET I of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 1226 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.61 14.310 14.114 6 DATUM DATE NGVD 29 3/27/07 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)5.37 CABLE CONNECTOR

............

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND I+ OR -): MEASURED CABLE LENGTH: 14.61 14.310 14.114 below-0.20 11:02 TOC 8.74 4.41 13.15 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT I Ir TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 4 GROUND., SURFACE WATER TABLE CABLE .....................

A A+i HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.11-- 8.74= 5.37 FT M.S.L.FT FT M.S.L.MIN HRS-qj'pa TEST NAME: LOGGING INTERVAL: TEST START TIME: U3-2 20 11:09 0" 0 TRANSDUCER SENSOR ...........

WELL BOTTOM .......V LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Small coating of product observed on transducer cable.GZA IWELL ID :1 U3-2 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Entergy Indian Point Energy Center WELL I1 SHEET FILE NO.PROJECT LOCATION U3-2 1 of 1 41.0017869.10 Indian Point w MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 1226 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.61 14.310 14.114 DATUM DATE NGVD 29 4/26/07 STATIC GROUNDWATER TABLE ELEVATION (FT)5.52 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........ ...........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW I-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR-): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?14.61 14.310 14.114 below-0.20 11:02 TOC 8.59+ 3.83= 12.42 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS IF GROUND-SURFACE A a-ll-ýA A WATER TABLE C.)=io CABLE ........................

4 ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.114-- 8.59=" 5.524 U3-2 20 9:29 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ...........

.WELL BOTTOM .................

1~L J LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES:

Small coating of product observed on transducer cable.Transducer cable replaced GZA IWELL ID] U3-2 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U-3-3 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEWYORK, NEWYORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4318 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.15 14.849 14.599 6 DATUM DATE NGVD_29 6/14/06 STATIC GROUNDWATER TABLE ELEVATION (FT)GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)7.90 CABLE CONNECTOR

..........

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: 14.15 14.849 14.599 below-0.250 14:15 TOC 6.70+ 6.361= 13.061 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS F___ a GROUND: SURFACE WATER TABLE A Ric lv A A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?CABLE ...................

C J)-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.599-- 6.70= 7.899 U-33 20 14:18 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE...........

TRANSDUCER SENSOR.WELL BOTTOM .............

--b LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID :] U-3-3 TRANSDUCER INSTALLATION LOC~GZA GEOENVIRONMENTAL OF NEW YORK 440 NINTH AVENUE, 18th FLOOR NEWYORK, NEWYORK 10001 SCIENTISTS AND ENGINEERS Client Entergy Indian Point Energy Center WELL ID SHEET FILE NO.PROJECT LOCATION U--3-3 -1 of 1 41.0017869.10 Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4318 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.15 14.849 14.599 6 DATUM DATE NGVD 29 11/6/06 STATIC GROUNDWATER TABLE ELEVATION (FT)6.79 GZA ENGINEER A. Hough ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

........................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 14.15 14.849 14.599 below-0.250 11:12 TOC 7.81+ 5.440= 13.250 FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT v GROUND.-';

SURFACE WATER.TABLE TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: z-7.A A HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?check check CABLE ...................

I A.1-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.599-- 7.81= 6.789 U-33 20 14:18 FT M.S.L.FT FT M.S.L.MIN HRS TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE.TRANSDUCER SENSOR .....WELL BOTTOM ......0 LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL ID I U-3-3 TRANSDUCER INSTALLATION LOG GZA GEOENVIRONMENTAL OF NEW YORK Client WELL ID U-3-3 440 NINTH AVENUE, 18th FLOOR Entergy SHEET 1 of 1 NEW YORK, NEW YORK 10001 Indian Point Energy Center FILE NO. 41.0017869.10 SCIENTISTS AND ENGINEERS PROJECT LOCATION Indian Point MANUFACTURER MAKE PSI CAPACITY SERIAL NUMBER In-Situ MiniTroll 30 4318 FINAL BORING DEPTH (FT)GROUND ELEVATION (FT)CASING ELEVATION (FT)CASING DIAMETER (INCH)14.15 14.849 14.599 6 DATUM DATE NGVD 29 5/11/07 STATIC GROUNDWATER TABLE ELEVATION (FT)5.97 GZA ENGINEER S. Covelli ELEVATION OF MEASURING POINT -DEPTH TO WATER = REFERENCE ELEVATION (WATER TABLE ELEVATION)

DEPTH TO WATER + ACTUAL DEPTH = CABLE LENGTH (if transducer is functioning properly)CABLE CONNECTOR

.....................

DEPTH TO BOTTOM: GROUND ELEVATION:

CASING ELEVATION:

CASING ABOVE (+) OR BELOW (-) GROUND: DISTANCE FROM CASING TO GROUND (+ OR -): MEASURED CABLE LENGTH: 14.15 14.849 14.599 below-0.250 16:30 TOC 8.63+ 4.689= 13.319 TIME OF MEASUREMENT:

MEASUREMENT TAKEN FROM: DEPTH TO WATER: ACTUAL DEPTH: THEORETICAL CABLE LENGTH: FT FT M.S.L.FT M.S.L.FT FT HRS FT FT FT check check FT M.S.L.FT FT M.S.L.MIN HRS GROUND.'SURFACE WATER TABLE.................

0. [_ý:;7 A V: A A 0 HAVE CLOCKS BEEN SYNCHRONIZED?

IS TRANSDUCER SET TO TAKE "SURFACE" READINGS?O-CABLE .......................

00-ELEVATION OF MEASURING POINT: DEPTH TO WATER: REFERENCE ELEVATION:

14.599-- 8.63-- 5.969 U3-3 20 16:32 TEST NAME: LOGGING INTERVAL: TEST START TIME: PRESSURE..........

TRANSDUCER SENSOR ............

WELL BOTTOM ......................

I r v LEGEND: DTW -DEPTH TO WATER DTB -DEPTH TO BOTTOM OF WELL AD -ACTUAL DEPTH OF TRANSDUCER UNDER WATER CL -CABLE LENGTH FROM SENSOR TO GROUND SURFACE/ TOP OF CASING NOTES: GZA IWELL IDI U-3-3

NL-08-009, Indian Point Energy Center - Hydrogeologic Site Investigation Report - Appendix J Through M

Text

Navigation menu

NL-08-009, Indian Point Energy Center - Hydrogeologic Site Investigation Report - Appendix J Through M

Text

Navigation menu

Search