On 02/18/2019, BCS [Blue Cube Solutions] was performing their routine operational checks of their
RAM LICENSED devices. During their routine maintenance checks, the shutter malfunction was discovered. The
gauge shutter would not close. BCS called a service contractor, BBP Sales, to evaluate the situation and determine the best course of action to correct the problem.
The sources and device with the shutter stuck open will remain installed on the process until the repairs are made. This is not a radiation exposure hazard and does not pose a health and safety situation for the BCS employees or the general public.
The Level Gauge is a KAY RAY Model 7062B device/source holder, S/N KR23306B, loaded with an approximately 100 mCi Cs-137 source.
LDEQ [Louisiana Department of Environmental Quality] was notified when BCS called the LDEQ Radiation Emergency Hot Line at 0800 CST. The notice was forwarded to the LDEQ/ERSD/Radiation Section. The notification was to get the preliminary information report and meet the 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> reporting requirement. Additional information will be provided when available. BCS will provide LDEQ a corrective action and a final report no later than 30 days of the corrective action.
This event is being reported to the NRC OPERATIONS CENTER as required by Regulatory Requirements 10 CFR Part 30.50(b)(2) & LAC 33:XV 340.B.
Louisiana report LA-190002.