ENS 51936
ENS Event | |
---|---|
04:00 May 16, 2016 | |
Title | Part 21 Notification - for Printed Circuit Boards |
Event Description | The following was received by email:
Required information as per 10CFR Part 21.21(d)(4) follows: (i) Name and Address of the individual or individuals informing the Commission Luis Sanchez, Vice President United Controls International 205 Scientific Drive NORCROSS, GA 30092 (ii) Identification of the facility, the activity, or the basic component supplied for such facility or such activity within the United States which fails to comply or contains a defect. Thomas & Betts Power Solutions/Cyberex Printed Circuit Boards (Gate Drive Assemblies P/Ns: 41-01-229677 & 41-01-229678, Reference Oscillator Module P/N: 41-01-808901) & Mersen (formerly Ferraz Shawmut) Fuses P/N: A30QS400-4 items were installed in PSEG [Public Service Enterprise Group] inverter unit and resulted in opening of P/N: A30QS400-4 fuses. When the original equipment was installed this issue was not present. (iii) Identification of the firm constructing the facility or supplying the basic component which fails to comply or contains a defect. United Controls International 205 Scientific Drive Norcross, GA 30092 (iv) Nature of the defect or failure to comply and the safety hazard which is created or could be created by such defect or failure to comply. Opening of the subject fuses prevents operation of the host inverter unit. (v) The date on which the information of such defect or failure to comply was obtained. March 17,2016 (vi) In the case of a basic component which contains a defect or fails to comply, the number and location of these components in use at, supplied for, being supplied for, or may be supplied for, manufactured or being manufactured for one or more facilities or activities subject to the regulations in this Part. The following is a compilation of UCI supplied items with like part numbers as the subject components. Only the printed circuit boards identified by the end-user [supplied under purchase orders 4500576271 (Qty. 1), 4500728702 (Qty. 1), and 4500625591 (Qty. 1)] along with the subject fuses supplied under purchase orders 4500810474 (Qty. 10) and 4500772093 (Qty. 6) are considered to possibly be affected by the end-user's reported issue. (vii) The corrective action which has been, is being, or will be taken; the name of the individual or organization responsible for the action; and the length of time that has been or will be taken to complete the action. UCI is not capable of performing additional evaluation of the subject printed circuit boards because UCI does not have the capability to simulate the in-service condition of these items. UCI suggests that the end-user perform additional evaluations with the subject printed circuit boards installed in their training inverter unit. UCI has requested that the end-user supply additional fuses supplied under purchase orders 4500810474 and 4500772093 for evaluation of current carrying performance since the fuses already provided were open. (viii) Any Advice related to the defect or failure to comply about the facility, activity, or basic component that has been, is being, or will be given to purchasers or licensees. None (ix) In the case of an early site permit, the entities to whom an early site permit was transferred. Not Applicable. |
Where | |
---|---|
Thomas And Betts And Cyberex Printed Circuit Boards Norcross, Georgia (NRC Region 1) | |
Organization: | United Controls International |
Reporting | |
10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component | |
Time - Person (Reporting Time:+18.65 h0.777 days <br />0.111 weeks <br />0.0255 months <br />) | |
Opened: | Korina Looft 22:39 May 16, 2016 |
NRC Officer: | Richard Smith |
Last Updated: | May 16, 2016 |
51936 - NRC Website | |
Thomas And Betts And Cyberex Printed Circuit Boards with 10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component | |
WEEKMONTHYEARENS 519362016-05-16T04:00:00016 May 2016 04:00:00
[Table view]10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component Part 21 Notification - for Printed Circuit Boards 2016-05-16T04:00:00 | |