The following information was provided by the State of
New Jersey via email:
On 7/22/2015, an inspection was conducted of an Ohio fixed gauge service provider working in NJ under reciprocity for a NJ specific licensee. The inspector was made aware that a fixed gauge had failed to shutter when attempted by the licensee. At this time, it is not known when the shutter failed. The gauge was in otherwise normal condition and no members of the public had access to the gauge due to engineering controls. The service provider replaced the air actuator and rotor during the inspection and the shutter was then functioning normally. The licensee was contacted by NJ and committed to providing the report required by 10 CFR 30.50(c).
Location: Phillips 66 Bayway Refinery, Linden, NJ
License No.: 506897-RAD150001
Device: Vega SH-F1A (with air actuator) serial number 0317 CG, containing 50 mCi (Assay date 1/2001) [Cs-137 contained in gauge]
Follow-up information will be provided when it is known.