B13325, Inservice Insp Rept

From kanterella
Jump to navigation Jump to search
Inservice Insp Rept
ML20247R968
Person / Time
Site: Millstone 
Issue date: 07/31/1989
From:
NORTHEAST NUCLEAR ENERGY CO.
To:
Shared Package
ML20247R965 List:
References
B13325, NUDOCS 8908080151
Download: ML20247R968 (61)
v • d • e


Text

- - -

l

\\

u ;.

Docket No. 50-336 l

B13325 1

\\

I l

Attachment Millstone Nuclear Power Station, Unit No. 2 1989 In-Service Inspection Report 8908000151 890729 PDR ADDCK 05000336 July 1989 G

PNV

. h l

l l

'4 1

bs l'

v l

l i

l' l

l i

(

Section 1 Table Of Contents

4 e4 6

I

'/

NL3C0 TABLE OF CONTENTS Section Title 1

Table of Contents 2

Owner's Data Report NIS-1 3

Abbreviations and Acronyms 4

Introduction 5

Procedures and Personnel Qualifications 6

Equipment and Material Lie!

c 7

Conditions Noted 8

Class 1 Examination Results 9

Class 2 E:: amination Results 10 IWF Examination nesults 11 Corrective Measures Recommended arsd Taken 1

1 l

re96/95171 d

-4

- 6, v

i Section 2 Owner's Data Report NIS-1 l

\\

l

_ __ _ _ _ _j

4 i

l EFORM NIS-1 OWNERS' DATA REPORT FOR INSERVICE INSPECTIONS 3,

As required by the Provisions of the ASME Code Rules t

Northeast Nuclear Energy Company, P. O. Iox 270, Hartford, CT 06101 l

1. Owner (Name and Address of Owner)
2. Plant Millstone Nuclear Power Station, P. O. Box 128, Wt.terford. CT 06385 (Name and Address of Plant) l
3. Plant Unit 2
4. Owner Certificate of Authorization (if required)

NA 12/26/75

6. National Board Number for Unit 20914
5. Commercial Service Date
7. Components Inspected Manufacturer Component or Manufacturer or Installer State or National Appurtenance or Installer Serial No.

Province No.

Board No.

Reactor Vessel FLC to Shell Weld M-CE Inc.

67110 NA 70916 SG#2 Bottom Head to Tube M-CE Inc.

67511 NA 20929 Reactor Vessel Int. (Visuals)

M-CE Inc.

671'10 NA 20914 Loop Piping Welds

'M-Bechtel 502-19 NA NA PRZ. Bottom Head Welds M-CE Inc.

NA NA 20918 Safety Int.

P4nine Welds M. Drnvn NA NA NA PRZ. Spray &

Safety Lines M. Dravo NA NA NA Reactor Head Bolting M-CE Inc.

NA NA NA RCP Bolting and Supports M-CE Inc.

NA NA NA SG#2 Lug Sunnorts M-CE Inc.

67511 NA 20929 Class I Vnive En1rine Vnrinum NA NA NA SG#1 Nozzle &

Inner Radius M-CE Inc.

67510 NA 20928 Class 1,2 6 3 Supports Various NA NA NA SG #1 Tubino M-CE Inc.

67510 NA

? nope

SG //2 Tns4n7 M-CE Inc.

67511 20929 Note: Supplemental sheets in form of ILts, sketches. or drawings may be used provided (1) size is 8% in. x 11 in.,

(2) information in items 1 through 6 on this data report is included on each sheet.and (3) each sheet is numbered and the number of sheetsis recorded at the top of this form.

This form (E00029) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.

10017

E H

l y.

FORM NIS-1 (back):

1 4/13/89

a. Inspectian Interval fmm 12/26181to 17/76/95 -
s. Eunhtlan Dates I/?4/89 to
10. Abstract of Examinations. Include a list of examinations and a statement concerning status of work required for currentinterval. See Section 6 of the' attached report for Class 1. Class 2 Examinations including the IWF Supports.
11. Abstract of Conditions Noted.'

.See Section 7 of the attached report.

' 12. Abstract of Cor ective Measures Recommended and Taken

_See Section-12 of the attached report.

We certify that the statements made in this report are correct and the examinations and corrective mea-i sures taken conform to the rules of the ASME Code,Section XI.

424A

/du Date In 27 19 Y Signed NNECO By Owner -

NA NA Certificate of Authorization No. (if applicable)

Expiration Date CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and/or the State or Province of CI and employed by _ M.I M of

$f[#d have i sp/IT ected the components described in this Owners' Data Report during the period k

  1. /29 /if to - //

. and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners' Data Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners' Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any peisonal injury or property damage or a loss of any kind arising from or connected with this inspection.

Date 7

'19 88 h

Commissions InspMtor's Signature National Board, State, Province and No.

_____-___m.'___.__

i :....

,i i.'<[:,4 l

i

4

~;

e

. (...

Section 3 Abbreviations And Acronyms.

3 :.

\\

i I

s 4

('

ABBREVIATIONS AND ACTJNYMS ASME Section II, Winter 1981 Addenda 81W Authorized Nuclear In-Service Inspector l

ANII ANII Reviewed AR UT Calibration Block g

Cal. Block Control Element Drive Mechanism CEDM Inservice Inspection per ASME Section XI ISI LP Liquid Penetrant Level III Reviewer LR Magnetic Particle Testing MT l

Northeast Utilities NU NUSCO Northeast Utilities Service Company PR Plant Reviewer l

PT Liquid Penetrant Testing Ultrasonic Testing UT VT Visual Examination re96/95171

<~'

2..;>

.c.

k'.

._ e :.

l Ls '.

y t :;

y

. u.

1 D4 1:

[l"h li l'

l Section 4 Introduction l ?' T 4

m e

l

.'l l

X' l

- s i

l l

l 1.1 4

l l --

w

r. -

24

{

[a;

.s INTRODUCTION 1..

Volumetric, surfacd, and visual examinations were performed as required by Section II of the ASME Boiler-and' Pressure-Vessel Code, 1980 Edition,, including the Winter.1981 Addenda, h

. 2.

AllIrecords, examination. data sheets,'personne1' certificates, equipment, and material' certificates'for.the examinations performed are.on file'at'the Millstone Nuclear Power Station Unit 2.

- 3.

All items liste'd in this report are creditable items to the second period of the SecondLInterval In-Service Inspection Ten Year Class 1 and Class 2 program, with.the exception of:

'l A.

The additional visual examinations required'to meet IWF-2430 (a) or (b).:

'I B.

Augmented visual examinations of the pressurizer spray.line to meet the' requirements of NRC Bulletin #88-11.

~

C.-

. Augmented visual examinations. imposed by the'NUPOC ISI coordi-nator to satisfy the requirements of IWF-3400 relative to

' nonconforming support #SIAH-02. This support was not scheduled to be examined during this refuehng outage but was reported to be nonconforming.

.(:

D.

The B-G-2 category valve flange bolting (1-1/8" dh.) replaced on valve numbers RC-200 and RC-404. This new hiting was liquid penetrant examined to satisfy an."up-grade" requirement

~

and visually examined to satisfy the preservice requirement.

E. -

Since the 1989 refueling outage was close to the end of the

~

first period and the start of the second period, several items noted in Section VI of this report will be creditable to the first period.

4 The examinations listed in this report were performed by personnel from the Northeast Utilities Service Company, Nuclear Engineering and Operations Group, EBASCO Services Incorporated, and Combustion Engineering Incorporated.

5.

The rescheduled items listed in Section IV of the 1988 Refueling Outage Summary Report have been examined during this refueling outage. Examination credit will be applied to the first period of the second interval to meet the percentage requirements of IWB-2412.

i l

)

I i

re96/95171.

s-

_A'....

y 7,; -i. -

y--'

'. s >

t. A.

[-_%' v j.

t: < -; ;

\\; y,

4

,j>

t:-

j.':'

Section 5 n

P.rocedures And Personnel. Qualifications p

i.i.

> i 1,

(

U l

egy

'h:

"1; c o-4

.A ~

[-

6

-PROCEDURE LIST j'{

NUSCO l'.

4 Number-Revision'

' Description NU-LP-1 8

Liquid Penetrant Examination NU-MP-1:

7 Magnetic Partic1'e Examination NU-UT-11 7

Ultrasonic Examination Procedure for.Ceneral Requirements-

NU'UT 6 UT Procedure for-Austenitic and-Dissimilar Metal. Piping Welds.

6 NU-'UT-7 3

UT Procedure for Vessel Welds

- NU-UT-16 2

.UT Procedure for Pressurizer Support Structure Welds-NU-UT-17 3

UT Procedure for Nozzle to' Safe'End Welds at MP2 NU-UT-20 3.

UT Procedure 'for Nozzle Inner Radius' Areas at MP2 NU-UT 3 UT Procedure for Component Bolts and Studs NU-UT-26 1

.UT Procedure for Primary Coolant

' Pipe Welds at MP2 NU-VT 8 Inservice Visual Examinations ~

t-Combustion Engineering Number Revision Description HP-410-003 0

UT of the Reactor Vessel to Shell Weld from the Flange Mating Surface

.re96/95171 o!h.

is r

I f - [^

PERSONNEL LIST EBASCO Services Incorporated Date of f

Name-Methods / Levels Eye Certification l

VT PT UT MT 01/12/89 1.

R. Barnes III II III 2.

J. Busby II II II II 01/10/89 02/05/89 II I

3.

W. Chabotte Jr.

11/10/88 I

I 4.

D. Dufrene 5

M. Grell II II II 02/09/89 6.

M. Hahn IT IT IT 05/03/88 II II II 07/12/88 7.

A. Jay Harry 8.

P. Kovalovich II II II II 09/50/88 9

.V. Mondragon II IT II 10/17/88

10. T. Oddson I

IT I

IT 09/07/88

11. O. Saulter II II II II 08/18/88 01/19/89
12. S. Spindler II
13. E. Sullivan II II II 02/05/89
14. L. Valenzuela II II II II 05/18/88 III 09/23/88
15. R. Zieber III III NUSCO Date of Name Methods / Levels Eye Certification VT PT UT MT 1.

T. Davis II II II II 10/13/88 2.

P. Durand II II II II 08/04/88 3.

R. Fuller II III III III 07/26/88 4.

J. Pinto II II II II 02/09/89 Combustion Engineering Inc.

Date of Name Methods / Levels Eye Certification VT PT UT MT 01/16/89 I

1.

D. Hartel 02/13/89 II 2.

R. Michalski re96/95171 J

I I

p I

/

r

g.-

1

.,g,.

.,4,' I s,.,'.

5 :.

.Ii t ! l,.?. p.,

( '.. ~

i i

w i

~Section'6' Equipment'And Material _-List

.4 i.

1 1

!5

.- l. i f.

5 i

Y l

6

.a.

.(7 ULTRASONIC TEST INSTRUMENT LIST 1

1 1

Manufacturer Model Serial Number KB USL-38 180453 i

l KB USL-38 180454 KB USL-38 220895 KB USL-48 213051 KB USL-48 213222 MACNETIC TEST INSTRUMENT LIST Manufacturer Model Serial Number Magnaflux-H-820R 87933 Parker Probe DA-200 8947 Parker Probe DA-200 8698 NDE MATERIAL LIST Manufacturer Item Type Batch #

Echo Laboratories Couplant Ultragel II 8668 Magnaflux Cleaner SKC-NF/ZC-7B 88A004

- Magnaflux Penetrant SKL-HF/S 87F083 Magnaflux Penetrant ZL-54 86C03W Magnaflux Developer SKD-NF/ZP-9B 87M020 Magnaflux Developer ZP-4B 85C050 re96/95171

.?.

';g.

ULTRACONIC TRANSDUCER LIST

![

' Manufacturer Frequency Size Serial Number Aerotech 2.25 MHZ 1/4" dia.

F24762 Aerotech 2.25 MHZ 1/2" dia.

D27724 Aerotech 2.25 MHZ l/2" dis.

K27620-Aerotech 2.25 MHZ 3/4" dia.

C13628 Aerotech 2.25 MHZ 3/4" dia.

E09696 Aerotech 2.25 MHZ

~1-J/8" dia.

K11584' Aerotech 2.25 MHZ 1/2" x 1" H25835 Aerotech 2.25 MHZ 3/2" x 1" J27831 Aerotech 2.25 MHZ 1/Z" x ]"

J27832 Aerotech 2.25 MHZ 1/2" x 1" J27833

.Megasonics 3.0 MHZ 1/2" x 1" CSS 105/

CSS 106 RTD.

2.0 MHZ 2(10x18) 86 76 l

l l

l l

t re96/95171

1 4

j.

-(I ULTRASONIC CALIBRATION BLOCK LIST

.g 25203-29449 Block Number Drawing Number Revision UT-2 Sheet #7 2

UT-4 Sheet #5 1

UT-7A Sheet #11 1

UT-15 Sheet #30 1

UT-16 Sheet #31 1

UT-20 Sheet #3 1

UT-21 Sheet #1 I

UT-27 Sheet #20 1

UT-28 Sheet #21 1

UT-29 Sheet #22 1

UT-32 Sheet #24 1

UT-34 Sheet #15 1

re96/95171

- l.

I s.

h'.

I i

I Section 7-Conditions Noted l

i.

___._m--_m.___

__m--_

'5s C

q i

~f CONDITIONS NOTED

'l

-t

{

1. :.. Volumetric, surface, and visual examinations were performed, as-g required,.by the ASME Boiler and Pressure Vessel Code, Section..'XI, 1980 Edition, including the 1981 Winter Addenda.. However, the extent of the examinations for Class 1 (B-J) and Class 2 (C-F and C-G) are determined by the 1974 Edition,-including the 1975 Summer Addenda, as required and/or permitted by 10CFR50.55a.

2.

Two sets of valve flange bolting were replaced on' valves RC-200 and i

RC-404 this refueling outage.. See Section VI Category B-G-2, for

.the preservice examination results.

3.

Class 1 and 2, component supports..were corrected in accordance with.

-standard component maintenance procedures.

4 re96/95171

_-________x_-

4.

k ":-

4.

['

.i Section B Class 1 Examination ~Results y

1.-

l

~~^~

--=----_._._.____,j _ _ _

c-o

- f.(

CLASS 1-EXAMINATION RESULTS CATEGORY B-A Examination Area:

Pressure Retaining Welds in Reactor Vessel Examination Method:

Volumetric (UT) 1 1

ITEM NUMBER RESULTS REMARKS FS-1 Acceptable Examined 50% of this veld as permitted by Note 5, of i

Table IWB-2500-1. Note 10 l

l l

l 4

1' re96/95171 l

L.--___---__-

CATEGORY B-B Examination Area:

Pressure Retaining Welds in Vessels Other Than Reactor Vessels Examination Method:

Volumetric (UT) 0* - 45' - 60* scans ITEM NUMBER, RESULTS REMARKS PR-BHS-1 Acceptable Scanning limitations due to permenant insu..ation bracket, examin ed approxi-mately 97 percant of the required volume.-

PR-LSL-1 Acceptable Long seam. Note 10 PR-USL-1 Acceptable Long seam SG-2-BHC-2 Acceptable Indications seen on 45* and 60* scans are acceptable in accordance with IWA-2232.

Note 10 SG-2-BHV-1 Acceptable Long seam. Note 10 SG-2-BHV-3 Acceptable Long seam. Note 10 SG-2-BHV-5 Acceptable Long seam. Note 10

)

FG-2-BHV-7 Acceptable Long seam. Note 10 l

re96/95171

e.

e i

CATECORY B-F 1

Examination Area:

Pressure' Retaining Dissimilar Metal Welds Examination Method:

Volumetric (UT); Surface (PT) or (MT)

ITEM NUMBER RESULTS REMARKS

'BPD-C-2001 Acceptable PT.

Note 10

.BCH-C-2001 Acceptable PT BSI-C-2001.

Acceptable UT and PT BPD-C-4000 Acceptable PT BSI-C-4000

' Acceptable UT and PT P-13-C-1 Acceptable UT and a cottbination of MT and PT.

Note 10 P-14-C-3 Acceptabic UT and PT P-17-C-1 Acceptable UT and PT.

Note 10 P-18-C-3 Acceptabir UT and PT l

l l

re96/95171 bx ______ _ _ _ _ _ _ _ _ _ _ _ _ _ _

CATEGORY B-G-1 t

l Examination Area:

Pressure Retain!ng Bolting Greater Than Two i

Inches in Diameter Examination Method:

Volumetric (UT) O' Scan; Surface (MT);

Visual (VT)

ITEM NUMBER RESULTS REMARKS N-01 thru N-18 Acceptable (MT)

N-15 nut indication seen with MT is acceptable in accordance with

-IWB-35t5.1(b). Note 10 N-19 thru N-36 Acceptable (MT)

None S-01 thru S-18 Acceptable (MT)

S-07; S-08 and S-13 stud

(

indications seen with MT are acceptable in accor-dance with IWB-3515.1(b).

Note 10 S-19 thru S-36 Acceptable S-21A, S-25, S-26, and S-33 (UT & MT) stud indications seen with MT are acceptable in acecrdance with IWB-3515.1(b)

W-19 thru W-36 Acceptable (VT)

W-24, W-25, W-27, W-33, W-35, and W-36 indications seen visually have been determined to be acceptable per engineering judgment RP-40D-S-01 Acceptable (UT)

Reactor coolant pump studs.

thru RP-40D-S-16 Note 10

  • The surface examination (MT) performed on these items is for second interval, first period credit.

S-01 thru S-IS were ultrasonically examined in 1988.

re96/95171

I?;+,

i

?.

/:'s-

-)'

'/

' CATEGORY B-G-2 Examination Area:

Pressure Retaining Bolting Two Inches in Diameter and Less Examination Method:

Visual (VT)-

4-ITEM NUMBER RESULTS REMARKS PR-B-2 Acceptable

'None.

SI-227 Acceptable

' Valve pivot cover and p

bonnet bolting h.

i SI-706B Acceptable Valve bonnet-bolting

.S1-247-Acceptable' Valve pivot cover and bonnet bolting. Non-relevant bonnet bolting; indications were accepted by Engineering RC-200 Acceptable Valve bonnet and flange L

bolting. The flange bolting was replaced. the new bolting was PT'd as an upgrade requirement and 1

visually examined for pre-service RC-403 Acceptable Valve bonnet bolting-RC-404 Acceptable Valve bonnet sud flange-bolting. The flange bolting was replaced, the

' j new bolting was PT'd as an

~

upgrade requirement and visually examined for pre-service RC-035C Acceptable Valve bonnet bolting RC-035D Acceptable Valve bonnet bolting RC-232 Acceptable Valve bonnet bolting 6

i re96/95171

1 L

l CATEGORY B-H Examination Area:

Intergal Attachments for Vessels Examination Method:

Volumetric (UT)

ITEM NUMBER RESULTS REMARKS PR-SUP-C-1 Acceptable Indications seen with UT were determined to be geonetric'in nature and therefore nonrelevant re96/95171

CATEGORY B-J Examination Area:

Pressure Retaining Welds in Piping Examination Method:

Volumetric (UT) and Surface (PT) or (MT) 4" and Over Diameter Pipe Size; Surface Only (PT) Less Than 4" Diameter Pipe Size ITEM MIMBER RESULTS REMARKS P-11-C-1 Acceptable UT and MT.

Indications seen on 45' and 60* scans are acceptable in accordance with IWA-2232 P-11-C-1-A Acceptable UT and MT P-11-C-2 Acceptable UT and MT.

Indications seen on 45' and 60* scans are acceptable in accordance with IWA-2232 P-11-L-1-A Acceptable UT and MT.

Long seam P-11-L-2-A Acceptable UT_and MT.

Long seam P-11-L-3 Acceptable UT and MT.

Indications seen on the 45* scan are acceptable in accordance with IWA-2232.

Long seam P-11-L-3-A Acceptable UT and MT.

Long seam P-11-L-4 Acceptable UT and HT.

Long seam P-11-L-4-A Acceptable UT and MT.

Long seam P-13-L-1 Acccptabic UT and MT.

Long scam P-13-L-2 Acceptable UT and MT.

Long seam P-14-L-3-A Acceptable UT and MT.

Long seam P-14-L-4-A Acceptable UT and MT.

Long seam P-16-C-3 Acceptable UT and MT P-16-L-1-A Acceptable UT and MT.

Long seam re96/95171

l 9

4 CATECORY B-J (Continued)

Examination Area:

Pressure detaining Welds in Piping Examination Method:

Volumetric (UT) and 6urface (PT) or (MT) 4" and Over Diameter Pipe Size; Surf ace Only (PT) Less Than 4" Diameter Pipe Size ITEM NUKBER RESULTS REMARKS P-16-L-2-A Acceptable UT and MT.

Long saem P-17-L-1 Acceptable UT and MT.

Long seam P-17-L-1-A Acceptable UT and MT. Long seam P-17-L-2 Acceptable UT and MT.

Long seam P-17-L-2-A Acceptable UT and MT.

Long seam P-18-L-3-A Acceptable UT and MT.

Long seam P-18-L-4-A Acceptable UT and MT.

Long seam BSI-C-1053 Acceptable UT and PT.

Note 10 BSI-C-1055 Acceptable UT and PT.

Note 10 BSI-C-1061 Acceptable UT and PT BSI-C-1085 Acceptable UT and PT BSI-C-3050 Acceptable UT and PT.

Note 10 BSI-C-3054 Acceptable UT and PT.

Note 10 BSI-C-3064 Acceptable UT and PT BSI-C-3066 Acceptable UT and PT BSI-C ';015 Acceptable UT and PT BSI-C-4008 Acceptable UT and PT BSI-C-4012A Acceptable

.UT and PT BSI-C-4014 Acceptable UT and PT S

BSD-C-2019 Acceptable UT and PT.

Indications noted by PT are acceptable per Table IWB-3514.3 re96/95171

o CATECORY B-J (Continued)

Examination Area:

Pressure Retaining Welds in Piping Examination Method:

Volumetric (UT) and Surface (PT) or (MT) 4" and Over Diameter Pipe Size; Surface Only (PT) Less Than 4" Pipe Size ITEM NUMBER RESULTS REMARKS BSD-C-2021 Acceptable UT and LT

)

BSD-C-2025A Acceptable UT and PT BSD-C-2027 Acceptable UT and PT BPR-C-5105 Acceptable UT and PT BPR-C-5109 Acceptable UT and PT.

Indications noted by PT are acceptable per Table IWB-3514.3 BPV-C-5003 Acceptable UT and PT BCH-C-2019 Acceptable PT.

Indications noted by PT were irrelevant as r fified by retest BCH-C-2019A Acceptable PT BPD-C-4002 Acceptable PT BPD-C-4004 Acceptable PT BPD-C-4006 Acceptable PT BCH-C-1001A Acceptable PT IF-C-70Y*

Acceptable PT IF-C-71Y*

Acceptable PT 3

  • These examinations represent the completion of partial PT examinations reported on the 1988 refueling outage NIS-1 report. Instrumentation nozzle tube to flange #72, veld IF-C-72Y could not be completed due to permanent obstruction.

rc96/95171 j

l l

CATECORY B-K-1 Examination Area:

Integral Attochmer.ca for Piping, Pumps, and Valves Examination Method:

Surface (PT)

ITEM NUMBER RESULTS kMS PSLH-02 Acceptable None SIAA-04 Acceptable None f

a j

l I

1 l

re96/95171 l

l

CATEGORY B-N-1 Examination Area:

Interior of Reactor Vessel

  • Examination Method:

Visual (VT)

ITEM NUMBER RESULTS RD4 ARKS FBS Acceptable Flow baffle skirt welds.

Note 10 KW-1 thru KW-4 Acceptable Key ways.- Note 10 ONB-1 Acceptable Outlet nozzle boss at O*.

Note 10 ONB-2 Acceptable Outlet nozzle boss at 180".

Note 10 SC-1 thru SC-6 Acceptable Surveillance capsules.

Note 10 Note: Visual indications (deformation of CEDM guide cones) ('are seen during reactor vessel closure head internal exam. These indications were evaluated by Engineering and determined to be acceptable.

i re96/95171 a.

t :

~

4.'

t r

,1 k i.1.f :::

r.,.

Section 9

- Class 2 Examinatiori Results e.

E

's 1

1

CLASS 2 EXAMINATION RESULTS CATEGORY C-B t

Examination Are-*

Pressure Retaining Nozzle Welds in Vess.ils Examination Method:

Surface (MT) and/or Volumetric (UT)

ITEM NUMBER RESULTS REMARKS SG-1-FW-1 Acceptable None SG-1-FW-IR-1 Acceptable Inner radius re96/95171

9 QO')RY C-C

/

Examination Area:

Integral Attachments for Vessels, Piping, Pumpe, and Valves Examination Method:

Surface (MT) (PT) j ITEM NUMBER RESULTS REMARKS SG-1-CC-3 thru Acceptable Steam generator snubber SG-1-CC-8 support velds 402118 Acceptable 1-1/8" thick support plate to pipe weld i

re96/95171

!; + :

f.'., '

. 'JN M-

. 1

.,.. i i-i.'

.- 4 s

. c. ;

.-t 1

,=

I i

e' l

Section'10~~

l IWF Examination Results-t i

I i

i

_____._.__1._m.__m_

IWF EXAMINATION RESULTS CATEGORY IWF Examination Area:

Class 1, IWF Supports Examination Method:

Visual (VT)

ITEM NUMB',_

RESULTS REMARKS PSLH-01 Acceptable' Note 1 PSLH-02 Unacceptable Notes 1, 2, and 9.

PSLH-03 Acceptable Note 1 PSLH-04

' Acceptable Notes I and 3

'PSLH-05 Acceptable Notes 1 and 3 PSLH-06 Acceptable Note 1 PSLH-07 Acceptable Notes I and 4 PSLH-08 Acceptable Notes 1, 3, and 4 PSLH-09 Acceptable Notes 1, 3, and 4 PSH-62 Acceptable Note 10 PSH-64 Unacceptable Notes 7 and 9 PSH-65 Acceptable None CVCH-30 Acceptable Note 10 l

CCLH-05 Acceptable Note 10 CCLH-06 Acceptable Note 10 CCLH-02 Acceptable None CLDH-01 Acceptable Notes 3 and 10 I

CVCA-02 Acceptable None CVCH-03 Acceptable Note 10 l'

re96/95171

e.

IWF EXAMINATION RESULTS (Continued)

CATEGORY IWF Examination Area:

Class 1, IWF Supports Examination Method:

Visual (VT)

ITEM NUMBER RESULTS REMARKS CVCH-04 Acceptable Note 10 CVCH-06 Acceptable Note 3 CLDH-09 Acceptable Note 3 SIAA-04 Acceptable Notes 3 and 10 SIAH-02 Unacceptable Notes 5 and 9 SIAH-28 Acceptable Note 6 SIAH-34 Acceptable Note 6 SIAH-35 Acceptable Note 6 SIBA-05 Acceptable None SIBH-04 Acceptable Notes 3 and 6 SICS-06 Acceptable Note 10 EIDH-0S Acceptable Note 11 SDCH-01 Acceptable None SDCH-02 Acceptable Notes 3 and 10 SDCS-01 Acceptable Note 10 PSH-38 Acceptable Note 10 PSH-40 Acceptable Notes 3 and 10 ISH-41 Acceptable Notes 3 and 10 PSH-63 Acceptable Note 10 l

PSH-24 Acceptable None re96/95171

- 4.

l q

.[.

IWF EXAMINATION RESULTS'(Continued)

CATEGORY IWF Examination Area:

Class 1, IWF Supports Examination Method:

Visual (VT)

ITEM NUMBER RESULTS REMARKS

' 408009 Acceptable None 408010 Acceptable Note 10 PSVS-b8

-Acceptable Note 10 408001 Acceptable Note 10 408002 Acceptable None 408004 Acceptable None PSH-03 Acceptable Notes 3, 4, and 8 PSH-06 Acceptable None PSH-60 Acceptable Note 10 PSH-61 Acceptable None l

l l

l re96/95171 l

--..-.-2--

__.m.

4 l

IWF EXAMINATION RESULTS CATEGORY IWF l

N Examination Area:

Class 2 IWF Supports Examination Method:

Visual (VT)

ITEM NUMBER RESULTS REMARKS SG-1-CC-3 Acceptable Note 3 3G-1-CC-4 Acceptable Note 3 SG-1-CC-5 Acceptable Note 3 SG-1-CC-6 Acceptable Note 3 i

SG-1-CC-7 Acceptable Note 3 SG-1-CC-8 Acceptable Note 3 302034 Acceptable Note 10 302035 Acceptable None 402064 Acceptable Notes 3 and 10 402111 Acceptable Note 10 402114 Acceptable None 402116 Acceptable Note 3 402123 Acceptable None 40205' Acceptable None a

402058 Acceptable None 402060 Acceptable Note 3 402073 Acceptable None 402082 Acceptable None 402038 Unacceptable Notes 7 and 9 402041 Acceptable None re96/95171

p i

I 1

E

./

IWF EXAMINATION RESULTS (Continued)

CATEGORY IWF Ex. amination Area:

Class 2 IWF Supports Er. amination Method:

Visual (VT)

ITEM NUMBER RESULTS REMARKS l

I 402105 Acceptable None i

402026 Acceptable None 402028 Acceptable None 402053 Acceptable None 402061.

Acceptable Note 3 l

402100 Acceptable Note 10 402102 Acceptable None 404015 Acceptable Notes 3 and 10 MSR-2 Acceptable Notes 3 and 10 412007 Acceptable Notes 3 and 10

380080, Acceptable Note 3 402065 Accepteble Note 10 402066 Acceptable Note 10 402098 Acceptable None 402108 Acceptable Notes 3 and 10 1

402121 Unacceptable Notes 7, 9, and 10 402122 Acceptable Notes 3 and 10 502016 Acceptable Note 10 re96/95171

0

'IWF EtM4INATION RETULTS (Continued)

CATEGORY IWF

[

Examination /.rea:

Class 2 IWF Supports Examination Method:

Visual (VT)

ITEM NUMBER RESULTS REMARKS 502030 Unacceptable Notes 7, 9, and 10 502031 Acceptable Note 10 502033 Acceptable Note 10 302040 Acceptable None

.380278 Unacceptable Notea 7. 9, and 10 402088 Acceptable Note 10 402089 Acceptable None 410033 Acceptable Notes 3 and 10 410066 Acceptable None 510025 Acceptable None 402077 Acceptable Note 10 502012 Acceptable Note 10 502032 Acceptable None I

302083 Acceptable Note 6 402002 Unacceptable Notes 7, 9, and 11 l-402008 Acceptable Note 8 l

8 402009 Acceptable Note 8 1

402086 Acceptable None 402093 Acceptable Note 8 402094 Acceptable Note 8 1

1 1

I re96/95171 b

l l

IWF EXAMINATION RESULTS (Continued) l-l CATECORY IWF Examination Area:

Class 2 IWF Supports Examination Method:

Visual (VT) 1 TEM NUMBER RESULTS REMARKS 402120 Unacceptable Notes 7, 9, and 10 502019 Acceptable Notes 3 and 10 402006 Unacceptable Notes 7 and 9 402007 Accepta'ble Note 3 402020 Acceptable Notes 3 and 8 402023 Unacceptable Notes 7 and 9 402048 Acceptable Note 3 402049 Acceptable Note 3 402118 Acceptable Note 10 402097 Acceptable Note 8 re96/9$171

+-

NOTES CLASS 1 AND 2 COMPONENTS Note 1:

.This support was examined in accordance with the commitment made to address the concerns on NRC Bulletin #88-11.-

Note 2: '

This support had one loose nut and. therefore, rejectable.

The requirements of IWF-2430 have been' met since the examina-tion program. included the total-population of supports associ-ated with the pressurizer surge line.-

Note'3:

Visual indications were noted but. determined to.be acceptable within the limits of IWF-3400 by Engineering.

Note:4:

These supports were also examined for second interval, second.

period credit.

Note 5:

This safety injection support was noticed (examined) during the pressurizer surge line support examinations.

ItLwas not scheduled for ISI examination nor covered by NRC Bulletin #88-11..

We did however, augment the ISI examination plan to include several other safety injection supports.

Note 6:

LSafety injection system supports examined per Note 5, augmented program.

Note 7:

The expanded program requirements of IWF-3400 have also been met.

Note 8:

Added to ISI/NDE work plan in accordance with the requirements of IWF-2430 (a) or (b).

Note 9:

Class 1 and 2, component supports were corrected in accordance with standard component maintenance procedures.

Note 10: Creditable item to the first period, second ten-year interval.

-Note 11: Added to ISI/NDE work plan in accordance with the requirements l'

of IWF-2420(b).

l I

re96/95171 l.

t.'.

(y _.

...u j

1 1

Eection 11 Corrective Measures Recommended And Taken

,. (:

t.

k

ACP-QA-2.18 Page 19 Rev. 0 4

FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI

///18 l $f NDNI W AM NCM O

care 1.

Owner i of i 70 an s2n varet'Yko

/r 064%

sh,,,

(AoGress) 2 nil LL97Dbd C Unit 2.

Plant fo Gn 179 LfAEE F o @,e T N EMb HddJt~

bW M'2-8%0W47 Th2 '/O.OLM (do 3.

Work Per'ormed by 6TiseSU stA"."PA RN(Acor6ss MLMI YDM 6% MMS DO

~

Identification of $ystem 65 Edition.

$09 Addenda, Code Cases 4

(a) Applicable Construction Code'im cm% A g i

(t) Applicable Edition of Section XI Utilized for Repairs or Repiscements - 19.f$, U81 -. Addenda, Code Cases E.

Identification of Components Repaired or Replaced. and Replacement Components E.

Name of Narne of Mfrs. Ser.

Nat'l.

CRN !

Other Year Repaired.

AEME Code Compenent Mfr.

No.

Bd.

No.

Identi-Evilt Replaced.

Starnged (Yes cr Nc)

No, fication or Replacement 869OL 81 FYAW OC C517hld l

ItC?p>s L 3%2 CC CEG75)I l

Descriptionof Work _ smWm MP LOCR WELO PtD6 iu PLU6 PEvd,9 mcMAruar. Pwes 4

8.

Tests Conducted:

Hydrostatic O Pneumatic 0 Nominal.Ogerating Pressure O other O 7.

Pressure psi Test Temp.

  • F NOMC RCliliIEC'U G.

Remarks _pococame manufacturers omia Recons to te anacam CERTIFICATE OF COMPLIANCE E d' E ALIE-conformsto Eec-ion N of.*

We certify that the staternents mace in this rerort are correct and this WP8" *"'5**"1 ASME C-ce 7

be**-

18 19 O g ~

(c.ner or o.aer s oesigrise G7t top Signed l

CERTIFICATE OF INSPECTION "ersigned, holding a valid commission issued by the National Beard of Eder and Pressu 1, t"

[8 1 #.I of C7

- employed by or Province of_

YN

,ifN 6,N have inspected the _

8A described in this Report on reos.ns,o, ae.ueroermsii and state that to the test of my knowledge and belief, this repair or replacersent has been construc ed in accordance li d the ACME Code. By signing this certifieste, neither the inspector nor his employer makes any warranty, expressed or imp e, cenc i

ing the repair or replacement described in this Report. Furthermore, neither the Inscector nor his employer shall be liable for any personalirNuor property damageyI f*a losgf any kind arising from or conne l

i C I // M Wf-A-

Comminions (Stard er prow.nce. Nancnal 6carci cate poectoq Supolamental sheets in form of lisu. snatches, or drawier;s may be used provided (11 size is SY2 in. X t1 in.,

s on this data report is included on each sheet. and (3) each sheet is numberec No te:

(d information in items 1 through and Ine numrer of sheets To recorced at the tcp of this for n.

I FIGURE 7.2 1

ACP-QA.

p Page 19

~ Rev. O e

FORM NIS-2 OWNER'S REFORT OF REPA!R OR REPLACEMENT As Required by the Previsions of ASME Code Section XI 3b NOMCW #LN MW "

Date 1.

Owner Co. 00% 11'3 s@TO?IdU, dT' o r,37i sn,,1 I

2 M i LC ' PIN C Unit 2.

Plant tr.m.

30. M7L oATCPEru, CT OW6 3.

Work Performed by p0E

$"Hov=e AGOs M -E'l-do 4 59 A rn'J-VM - 0ON I me:an crsan.sanon P.c e<o,.Jen no eic.

igameg peoressi RNM MMd*"

iDN CMMD6 e.

IdentUication of System 05 Edition _ 6M Accenda, Code Cases Applicable Construction Code 9EIL W A 19 (a) 5.

(t) Apoticable Edition of Section XI Utilized for Repairs or replacements -ISM 2, IMi Addenda, Code Cases 6.

Identificaricn of Components Fepaired or Replaced, and Replacement Ccmpcnents Name of Name of Mf rs. Ser.

Nat'l.

CEN Cther Year Repaired.

ASME Ccts Component Mfr.

No.

Ed.

No.

Identi-Built

Replaced, Scamped No.

fication or (Yes cr Ncl Replacement Mk1 C.E.

CEb75IO REhPCEM&fTl c?2 b e.2.) C.E.

dE47611 EdtANMmTl l

l I

l.

I i N9ITEL OkTHAfWC4 L. " TOPE B.O6th 7.

Description of Work E.

Tests Conductedt Hydrostatic O Pneumatic O Nominai.cferatino ressure O cther O r

Pressure est Test Temp.

  • F OYY% WOIO 9.

Rornarks v eo.ca:.. u.aurac:w.rs em e n,ans io c. n.icnn CERTIFICATE OF COMPLIANCE NOOLM conforms to Secticn XI cf

.'.e t

We cenify that the statements rnade in this report are correct and this a.r or r.;nacameno ASME C-*.

j E8

^

l go T u.

/ (c

~

Signed

(,,/ "

9 er or baer a cenicnee CERTIFICATE OF INSPECTION l

l, the undersigned. holcing a valid commission issued by the National Ecard s.f Boilem and Pressure Ves N{$.8 -

cf fI

. employed Dy cr Prev.ence of M/##dsI described in this Report en O~ d [ *N l/

,1 i

M

^M have ins;ected the the:sirts; or Lepiacememtsq snd state tnat to the test cf rny knowledge and teilef,this repair or reptscement has been tenstructed in accordance with Secticri XI cf tne ACME Code. By signing this certificate, neither the Inscector nor his employer snake 'ny warranty, expres:ed or irr. plied, ecncern.

ing the repair or replacement r/escribed in this Report. Furthermore, neither the inspector nor his employer shall be liable in any rnaneer for any personal injury or prcpeny damace or a loss of any kind arising from or connected withJis Inspecticn.

/

/

I Commissions Cate (c:ase ce Pr/=mca. Nattr.r.at Sc arc; Dystect:r) fVote: $wrolemental sh.ets in f orm of lisr., sketches, or crowings rr.av t. us.c prowic.d (1) size is 8% in. X 11 in.,

e ine,rn.een in a. ns i in,ouss 4 on in;. est. recort i. incive.a on..cn sn..t..ne <si..cn.n..

s nome.,.e o

.no in. no,nc., or sn..is i e. core.e. in. ico of snis form.

FIGURE 7.2

i 4

9 :

FORM NIS.2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI f/((PP owner Northeast Nuclear Eneray Company o,,,

s.

P'0. Box 128 Waterfof"d" Ct.

06385

/

j 33,,e 2

Millstone unit 2.

pi,n, P.O. Box 128 WatetTbrd, Ct. 06385 NortMM NuCiear Enerqv Co./Nd/2-M. -N-//I'/ 7. ///4.5', ///3'/ ip9&

s.

vsock Performed by P.O. Box Me"Waterford, Ct. Sad 5=a=aa* oaa m aa aic. '

/

pcams) 4 Identification of System '

"~i MN ' hMWO 5,

'(a) Applicable Construction Code A'N' 19 4.5~

Edition _ MM Addenda, Code Cases (b) Applicable Edition of Section XI Utilized for Repales or Replacements - 19 W, 'df Addenda, Code Cases 6.

Identification of Components Repaired or Replaced, and Replacement Components Name of Name of Mfrs. Ser.

Nat'l.

CRN Other Year

Repaired, ASME Code Component Mfr.

No.

Bd.

No.

Identi-Built Replaced.

Stamped

. No, fication or (Yes or No)

Replacement ff 7/

  • /Dtykw/

Ve-3

^ #l S b-Of

~

~

/

/9 2/

'8.,s/$u/

WS

~~

  1. z Wd-Cf

~

7.

Description of Work W IM85NM4M B.

Tes.s Conducted:

Hydrostatic O Pneumatic O Nominal oRerating Pressurek other O Pressure N psi Test Temp G 2 *F Wl S N*MW MN&W CY/A5 MM NY l~ Y o*W s

r wt e -

9.

Remarks

/- $.$<**){*"?"$5ll YSW~- ?

z - SerNr$1 /har/e /L AL.S$

/'

l CERTIFICATE OF COMPLIANCE l

& M*#

conferrns to Section XI of tre We certify that the statements made In this report are correct and this 8W 5

gg ftf g(< [

WM

,z g

,.- -- a..s CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State N -- I O

of or Province of I/

, employed by I

,19 NAMIN have inspected the /W'**

described in this Report on Pepairtslor heplacemengslj and state that to the best of my knowledge and bellef this repair or replacemen? has been constructed in accordance with Section XI cf the ASME Code. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concern.

ing the repair or replacement described in this Report. Furthermore.neither the inspector nor his employer shall be liable in any rnanner for any personal injury or property dam or apl ss of any kind arising from or connected with this Inspection, 07 #//

/

Commissions oate

(/ (Inspecton (biate or Prowmce.Nationa16Da'd)

Nors: Supplemental sheets in form of lists, sketches, or drawings mov be used provided (t) slas is $361n. X tt in.,

(21 Informetlen in items 1 through d on this date report Is incluoed on sech sheet, anJ (31 each sheet is numbered and the number of sheets is recorded et the top of this form.

l

(

j,-

,s:

' FORM NIS.2 OWNER'S REPORT OF REPAtR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 5 Sf s

owner Northeast Nuclear Enercy Company -

pate 1

33,,,

f f

P.O. Box 128 Waterford'"Ct. 06385

@0Gress) 2 Millstone-unit riant

2..

P.O. Box 128 Watet" ford, Ct. 06385, NortifM!M Nuclear Energy Co. #.00-A z. -Pf-6P 7 3.

Work Performed by P.O. Box FP8')Waterford Ct. Repaar Organszstson P.O Ho Job No..etC.

b 4'

b d!

4 Identification of System.

la) Applicable Construction Code ><M_C 19_ 6 E Edition.

869 Addenda, Code Cases 5.

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements

".3M, 4 61 Addenda, Code Cases 6.

Identification of Components Repaired or Replaced,and Replacement Cornponents Name of Name of Mfis. Ser.

Nat'l.

CRN Other Year

Repaired, ASME Code Component Mfr.

No.

Bd.

No, identi.

Buttt Replaced.

Stamped No..

fication or (Yes or No)

Replacement lWA Sphcr_

he w.u w N$

~

~

A4 V S8 d

7.

Description of Work B.

Tests Conducted:

Hydrostatic O rneumatic 0 'NominalOperating PressureM Other O U pil Test Temp.

  • F ressurs "W Remarks AA/Gm W Alt f nu h*

9 pppischie Manu acturer a cata Reports to be attached) r CERTIFICATE OF COMPLIANCE IM NsMfU conforms to Section XI of tP.e We certify that the statements made in this report are correct and this ES E h&

4f E,gg (C

Tme (Dare)

~

(wrier or Owner's Designerf CERTIFICATE OF INSPECTION t, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure vesset inspectors and the state W

SY cf or Prov1nes of O

employed by

/

,1Gb

  1. Mh'd have inspected the :Me'" A described in this Report on 1Aersirts)or mepiscernentts

and state that to the best of my knowledge and belief, this repair or replacement has been constructed in accordance with Section XI of the ASME Code. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concern. Ing the repair or replacement described in this Report. Ft;rthermore, pelther the inspector nor his employer shall be liable in any mann loss of any khid arising from or connected with this inspection. r for any personalinjury or property dam r CI#/N 0 3*'d A' Commisitons

g. tate or Province.Nanonsi 6 caro; oste C#nspector)

Note: Supplemental sheets in form of lists, sketches, or dravvings may be used proviced (t) al2e la 8% )n. X 11 in., y (2) Information in items 1 through 4 on this data report is incluced on each sheet, sed (3) each sheet la numbered and the number of sheets is recordsd at the top of this form.

7 l (' m e e FORM NIS.2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI M [P/ Northeast Nuclear Eneroy Company o,,, s.' owner f P.O. Box 128 Waterfoid!*Ct. 06385 / f 3n,,, 2 Millstone unii 2

rian, P.O. Box 128 Water"fbrd, Ct. 06385 Nort#diiH Nuclear Enerqy Co.A'aaacv',=n z. 6 7 -29p 6 y0 3.

work Performed by P.O. Box ri'8"Waterford, Ct. a r c aa an aoe'c-I / CTU# #N 4 Identification of System W Edition Addenda. Code Cases 5. tal Applicable Construction Code MF F 19 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 192, (vff Adden6, Code Cases 6. Identification of Components Repaired or Replaced, and Replacement Components Name of Name of Mf ra. Ser. N at'l. CRN other Year

Repaired, ASME Code Component Mfr.

No. Bd. No. Identi-Built Replaced. Stamped No. fication or (Yes or Nol Replacement p c m,ff f. Y C/sn., No ~ ~ Y [ ] r W7'l T$r.uJ Ash f'ome ZdL ~ ~ / b >< e-7. Description of Work E. Tests Conducted: Hydrostatic 0 rneumatic O Nominal.Op,eryting Pressure O other O Pressure psi Test Temp. 'F M 'F $W MOY~MU ~NMV 9. Remarks 4AppHcable Manufacturers Data Repons to be attacheQ CERTIFICATE OF COMPLIANCE M conforms to Section XI of the vve certify that the statements made in this report are correct and this / Irepai< or repsacemsni) W V 19 Y Y NS $;y ed ra., -l CERTIFICATE OF INSPECTION l, the undersigned, holding a valid commission issued by the National Board of toller and Pressure Ves I O 8 CU of or Province of

employed by MI

,1Gb Ahm%) have inspected the NA"'M described in this Report on Isena.nsio, eer.comenw and state that to the best of rny knowledge and belief,this repair or replacement has been constructedin acccedence with Section XI of the ASME Code. By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied. concern. ing the repair or replacement described in this Report. Furthermore, raeither the inspector nor his employer shall be fiable in any menner for any personst injury or property dam a c* a loss of any kind arising from or connected with this inspection. [NI Commissions H# ~- Date V pnspector) (Siste ce P'cwince,hauanai boaro) Supplemental sheets in form of lists. oketches, or giravvings may be vend provided (1) stre is 8% ln. X t t In., 19ere: C) Information in items 1 throuch 4 on this dass report is included on each sheet, and (31 each shoes is numtiered and the number of sheets la recorded at the top of this form.

.t. ' th _ .y )., T .U 9 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI f'/Ir /g-f owner Northeast Nuclear Enerav Company n,,, ) 1. / P.O. Box 128 Waterf or'"d""' Ct.~ 06385 Shee' / of k 2-Millstone unit

2..- Pi,n, -

P.O. Box 128 Water f'ord, Ct. 06385 NortWiM Nuclear Enerqy Co. [O 826377 s. Work Performed by P.O. Box FP8*Waterford, Ct. ^**'c am at'aarcaa sanac sic. s ) Pooressa ~ &NMT -. Addenda, Code Cases EMW i 4. Identification of System 7/ ' Edition. la) ' Applicable Construction Code A%*'+' IN - 19

5.. (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 19E, 'us/ ' Addenda, Code Cases A'

6. Identification of Components Repaired or Reptaced and Replacemerg Components . Name of Name of ' l. Mris. ter. lNat'l. 'CRN Other Year

Repaired, ASME Code

- Component Mfr. - Nc. Bdc No, Identi-Built

Replaced, Stamped lyes cr No)

No; fication . or Replacement ' /tN b/ / /tr ~ ~ hh ,0ct ss av N~Ni ~~ OV*}/28 /V W hl )!$ i , k, /bb* hurw ~ I

1

(: ,8 / 7.' Descripdon of Work l-8. Tests Conducted: Hydestatic O. I'neumatic D Nominal 0,p.ery:Ing Pressure O otherK m 1 Pressure psl Test Temp 'F bYv ~** s U S

  • WA ~ Y A /Su
  • A 9.

Remarks eppucame Manufacturers cata Reports to be attacneos f CERTIFICATE OF COMPLI NCE l W 'W#### confernis to Section XI of the We cert?y that tne statements made in tais report are correct and this / F#*' '"'P'a8'"""O ASMC Code f Y S~b t f 3g 29 f A $ig Qwner or owners Degneet 74te (Dates CERTIFICATE OF INSPECTION 1, the undersigned, ho' ding a valid commission issued by the National Board of Boiler and Pressurt Vesset inspectors a of or Provinca of - employed by I*I ,1od h'^' ^ have inspected the _.. described in this Report on h 1Aepains:of nepeacemenusi) and state that to the best of rny knowledge and belief,this repair or replacement t.as been constructed in accorcance with Sec the ASME Code By signing this certificate, neither the inspector nor his employer makes arty warranty, expressed or implied concern. Ing the repair or replacement describedin this Report. Furthermore, neither the inspector rior hit employer shall be liable In any los of any kind arising 1 rom or connected (th his in ection. for any personalir. jury or property dam or O Commissions (Liate or Pronnce,aat*onal Boaro) Da te... Anspectoo fvote: Suppterutal sheets in fccm of lists, skesches, or drawings may be sesed provided (1) stas is B% in. X tt in (2) Inform stion in items 1 through 4 on this data, report is includen on each sheet, and (3) each sheet is numbered and the 's 08 sheets la recorted at tuo top of this form.

- - _ - _*.s E'_ _ _ _ 1 { F. 9(._r{ }

  • Gl i

I f FORM NIS.2 OWNER'S REPORT OF REPAlR OR REPLACEMENT At Required by the Provisions of ASME Code Section XI j owner __ Northeast' Nuclear Eneray Company yhdf o,,, 1. P.O. Box 128 Waterfold7Ct. 06385 3s,,, f eccess) 2 Millstone untt.__.

a. Pian, P.O. Box 128 Watet' ford, Ct. 06385 j

l NortiTdiiH Nuclear Eneroy Co. [O @ M3f 7 s. work Performed by P.O. Box F29"Waterford, Ct. Ruair Organanon P.Q No,.JoD No wic. (Acoresal 4. Identification of System FF# "M (#N M# S. (a) Applicable Construction Code Md?'F F 19_ ~7 / Edition. Addenda, Code Cases (b) Appilcable Edition of Section XI Utilized for Repairs or Replacements - 193.e, *>5N Addenda, Code Cases 6. Identification of Components Repaired or Replaced, and Replacement Coriiponents Name of Name of Mf ts. Ser. Nat'l. CRN Other Year

Repaired, ASME Code Component Mf r.

No. Bd. No. Identi. Built Replaced. Stamped No. fication or (Yes or No) Replacement l? } */ bo Vf5 hb t- /)t.r> Se b# $b$ ~ /f7'l fls/$uc.l V6 ~ .$4b./.4be 0,< stw 'Y 9A I / / i 7. Description of Wari: M ^ E B, Tests Conducted: Hyc[:::stic 0 Pneumatic 0 Nominal O.p.erpting Pressure O other p psi Test Temp.

  • F l%'b ' Pressure 7~~~ k S* W A=

'5b V lF r

  • W Y Nc" C'* *1 9.

Remarks popiscatne Manufacturers Data P.epons to be attacneo) CERTIFICATE OF COMPLIANCE j M /#Af*d conferrns to Section Xi cf tr.t We certify that the statements rnade in this report are correct and this [ tepairorfeplacemeno Y r,1g f[ l' t. SE un-g

  • ' terJner or owners Designee /

tme (Date) CERTIFICATE OF INSPECTION 1, the undersigned. holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of I

employed by cf

<#^ M M have inspected th described in this Report on ,1. (hepairts)or Replacement (s)) and state that to the best of my knowledge and belief,this repair or replacernent has been constructed in accordance with Section Xi cf the ASME Code. By signing this cer*ificate, neither the inspector nor his employer makes any warranty, empressed or implied concern. ing the repair or replacement described in this Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or prcperty damr;e o loss of sny kind arising from or connected with this insp tion. P7 b ['[k Commissions Date / linschetor) (Liste or Prownce, hanones Boa <c) luote: Supplemental sheets in form of itsts. sketches, or drawirisp mey be used proviced (11 size is BM in. X 11 in., (2) information in items ' throu0h 4 on this dets report is included on each sheet, snes (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

^ i FORM NIS.2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI td4Y6f owner Northeast Nuclear Enercy Company o,1, 1. r.0. Box 128 Wa te rf oi'"d'"' Ct 06385 / / ss,,, (Acoress) 2 l Millstone unit 2. nant P.O. Box 128 WatM" ford, Ct. 06385 Nort$$cIU, Nuclear Energy Co. AZ-85-0324F 3. work Ferformed t<y P.O. Box 1%Waterford, Ct. aa' ' o's*aa*aa

  • o aa >aa aa *'c-0-

bc l 5 U f 5 M Ut'l W / N 7 R M L l identification of 5ystem (a) Applicable Construction Code A#F T19 W

Edition, Adde'nda, Code Cases 5.

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 19.T., A'6I -. Addenda, Code Cases 6. Identification of Compor.ents Repaired or Replaced, and Replacement Components Namecf Name of Mfrs. 5er. Nat'l. C.9N I Other Year

Repaired, ASME Code Component Mir.

No. Bd. No. Identi-Duilt

Replaced, Stamped ho.

fication or (Yes or No) Replacement Mvsf-of NNh hbcr cf A!c) oww pmsc "'~ ~ . [12/ O 6 tG6. McD seso y /VW r.6 MG-Re/1 tir7 dl-fc /f6h ufhaf Op r w -a ~ ~ / ( 1 N 7A 5

r 7.

Description of Work B. Tests Conducted: Hydrostatic O Pneumatic O Nominal Operating Pressure B' Other O Pressure 12 %' psl Test TempSE 'F D. Remarks eorucanie Manufacturers wa Recons to se attactiem CER7thCATE OF COMPLIANCE Y!e certify that the str.ments made in this report ar' orrect and this M f4*'d conforms to Eection XI of the "'D*'"8'"""U ASME Code - ;p Sign i - ifM -(2sn .~7st &cidine-[ ~ Y+</ ,3y M / (Owner or Owner s Gesigness / Tale (catej CERTIFICATE OF INSPECTION 1, the i ndersigned, holding a vatict commission issued by the National Board of PJ.ler ed Pressure Vesset le.spectors and the State 8 cf or Province of f"T

employed by I'd '

. described in this Report on S ,1$ A have inspected the _.A'# ,N4 (8+tfpairls)of Mplacernentisti and state that to the best af rny knowledge and benef, this repair or arplacernent has been constructed in acurdance with Section Xt of the ASME Code. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concern-ing the repair or ceplacervient described in this Reprt. Furthermore,neither the inspector nor his employer shall be liable in any manner ss of any kind arising from or connected with this insDection. for any prisonalinjury or property damacjerp/* C 9 5 S '}'7 / ' (Insycron 7 Commissions r Date (5 fate or Aovince.Nanonaleoarm Note: Sucalemental sheets in f orm of lists sketches or drawings may t>e used provided (1) slae le 8% 1n. X tt in., (d information in items t seeouch a on this data recore is indisded on each sheet. and (3) each sheet is numt>ered and the number of sheets is recordad et the top of this form. i

g w e I FORM NIS.2 OWNER'S REPORT OF REPAlR OR REPLACEMENT As Required by the Provisions of ASME Code Se-tion XI es -z _ g,;f [wn,r_NortheastNuclearEneroyCompara o,,, . i, y P.O. Box 128 Waterford,*' Ct. 06385 / 33,,, yearess) 2 Millstone

uni, nan, 2.

P.O. Box 128 Watet" ford, Ct. 06385 NortWiM Nuclear Eneray Co. Ap(>- // z -W-or2 2 / s. work Performed by awe o'seausi.oa a.o aa son a sic. P.O. Box 23*Waterford, Ct. WN ~ 6 ?~ Edition. Addenda, Code Cases Identification of System 4. (a) Applicable ConstUtToTC(de~"7dMF19_ 5. (b) Applicable Edit:en of Sectic,n XI Utilized foi Repairs or Replacements-19fc3?, tusf. Addenda, Code Cases Identification of Components Repaired or Replaced,and Replacement Components 6. Name of Name of Mfrs. Ser. Nat'l. CRN Other Year

Repaired, ASME Code Component Mfr.

No. Bd. No. Identi-Built

Replaced, Stamped (Yes of No)

No. fication or Replacement MY 2hdod V ~ 2-26 ZSL Ut/sn 2267 ~ s' 1 NAN N* 7. Description of work 8. Tests Conducted: ddrostatic O Pneumatic O Nominal oRerpting Pressure $ other O P, essure U A ps1 Test Temp 531 *F 9. Remarks pppucacie Manu'acturer a casa Reports to De attachec) l l CERTIFICATE OF COMPLI ANCE MA MI conforms to Section XI of the We certify that the stelements mcde in this report are correct and this I~1,, s9 SlldW mA) ^ zw c~ Me (Date; ~ (Ciht or Ownersiesigneep /( l CERTIFICATE OF INSPECTION l t, the ur.dersigned, holding a valid commission lasued by the National Boerd of Boiler and Pressure Vesset inspectors and t /II2? Z 00 cf C , empfoyed by or Province of F-1 ,19.1 2. / 2A 4 "Ib d have inspected th described in this Report sn thepairis)or Replacemenusil and state that to the best of any knowledge and belief,this repair or replacement has been construned in accordance with Section the ASME Code. By signing this cer-ificate, neither the inspector nor his employer makes any warranty, expressed or implied, concern-ing the repair or replacement described in this Report. Furthermore, neither the Inspector nor his employer shall be t.able in any ma for any personalinjury or property damrse r a loss of any kind arising from or connected with this inspection. Ob #// A Commissions (Liste ce Prownce, hononal boarol Date propecton Supplemental sheets in form of tiss. sketches, or drawing mey be used provided f1) size is 8% in. X tt in., Note: f2) information in items 1 through 4 on this dets report is included on es,ch sheet, and (3) each sheet is numbered and the number of sheets is re. corded atthe too cf this form. lE---_----__

e 9 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI f/[ -f owner Northeast Nuclear Eneroy Company o,,, 1. / P.0, Box 128 WaterfoliCCt. 06385 3n,,, / roo,.=> 2 Millstone

uni, Piant 2.

P.O. Box 128 Wattt" ford, Ct. 06385 NuC1 ear Enerqy Co.hvo - Af 2 -&S' M9JT Work Performed bygrt a**' *saaaaa

  • aa a' *c-3.

P.O. Box Yt8aWaterford, Ct. IMF778#INMW pooress: 4. Identification of System 1B_ 86 ~/ Edition Adcenda, Code Cases (a) Applicable Construction Coce 85d-(b) Applicscle Edition of Svetion IDtilizYdIo'r Repairs or Replacements.- 19% 4>6f Addenda, Code Cases 5. Identification of Components Repaired of Replaced,and Replacemtat Components 6. Name of Name of Mirs. Ser. Nat'l. CRN Other Year Repaired. ASME Code Component Mfr. No. Ed. No. Identi-Built Replaced. Stamped (Yes or No) No. fication ut Replacement NC 5 / h v' =,_ / l t

  1. d 7.

Description of Work B. Tests Conducted: Hyc6cstatic O eneumatic' O Nominal operating Pressure O other O Pressure ps1 Test Temp. 'F Sf ~ Z W h W f $4 &A*.e. f l OY M rY S E 'WM 4'Al 9. Remarks pppucAnia Manuf ar..urers Data Esports to te attactied; CERTIFICATE OF COMPLIANCE /* #f 4 conforms to Section XI of the We certif y that the statemenit made in (* sis report are correct and this ^' W 4 W k , z w & T s il,, sf Tme (Oste) (owner or Owners Des <grires / CERTIFICATE OF INSPECTION

1. the undersigned, holdirig a valid commission issued by the National Ecard of Boiler and Pressure Vessel inspector 1

of

employed by or Province of.

P ,19b M a f/ b d have inspected the[Mb W d - described in this Report on P'epairtsj or Aeptacarnerttisj( and state that to the best of rny knowledge and belief,this repair or replacement has been constructed in accordance wit the ASME Code. By signing thh certificate, neither the Inspector rior his employer makes any warranty, expressed or implied, co ing the repair or reo'acement described in this Report. Furthermore, neither the inspector nor his employer shall be liable in for any personalinjury or property damage or a loss of any kind arising from or connected with this inspection. /// Nbb ppscettor) Commissions (Date or hocact Naponal floaf e) Date Note: Supplemer tai shots in form of lists, sketches, or drawings mov be used provided (t) size is 8% in. X 11 in., (2) information in items 1 throvsh 4 on this data rur>crs is included on e.ch sheet, and (3) each sheet la r embered and the number of sheets is recorded at the top of tnis form.

4 e FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 2Mrr$ Northeast Nuclear Enerav Company o.,, 1. owner P.O. Box 128 Wa te rfo rd'" Ct. 06385 sn,,t j / 2 Millstone unit 2. Piant P.O. Box 128 Waterfbrds 't. 06385 Nort M t. Nuclear Energy Co. /)m/) #/2 - W -3 79 Z. 3. Work Performed by P.O. Box 170*Waterfords Ct. Spe' *iaa=oa r.c ao.aao ao, *ic. (Moress: MdM

  1. d4 4.

Identification of Systeg 5. (a) Applicable ConstrucNCbde YXd~ 19 67 Edition _ Addenda, Code Cases (b) Applicable Edition of Section x1 Utilized foi % pairs or Nplacements - 19Z - 4' W Addenda, Code Cases 6. Identification of Components Repaired or Replaced,and Replacement Comnonents Name of Name of Mfrs. Ser. Nat'l. CRN Other Year

Repaired, ASME Code Component Mf r.

No. Bd. No. Identi-Built

Replaced, Starnped No.

fication or (Yes or No! Replacement 70 %)/4,4) JGs KMS%d d main * !1~ ~ ~ i ( 1. Description of work

  1. FF fel J

l' ' V' ~ Y SfH B. Tests Conducted: Hydrostatic O Pneumatic 0 Nominai operating Pressure # Other O Pressure M> ps1 Test Temp. 3 32 op 9. Remarks repucao Manufacturers Data hepans in tw attacrwo) CERTIFICATE OF COMPLIANCE e/RePLAc.ceo* on,o,ms to 3,ction xi or e, We certify that the statements made in this report are correct and this. c 8_ M ,gg $g, y s u ...-.,s p.s-e, CERTIFICATE OF INSPECTION 1, the undersigned, holding a valid commission 1: sued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of 6

  1. 8 2 cf g' I

,e M&f/MA/ have inspected the l' ,19 described in this Report on thepe.rtsj o< Replacement (s)) and state that to the best of my knowledge and belief, this repair cr replacement has been constructed in accordance w1th Section XI cf the ASME Code. By signing this certificate, neither the Irispector nor his employer makes any warranty, expressed or implied. concern-ing the repair or replacement described in this Reptert. Furthermore,neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arisihg from or connected with this inspection. U7 'N WM - Comrnissions 8 Date tenspergf, (Stars o< P<omnce. kanonal Boseci f4ote: Supplemental sheets in form of lists, sketches. or drowingp may be used provided (t) slae is Bh in. X 11 in., (2) &nformation an items 1 throvgh 4 on this data report is included on each sheet. and (3) each sheet is numbered and the nun..ar of sheets is recorced at the top of this form.

.. M; y e + 4 .e-l g -+ O l. f L FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI l M24/[@ Northeast Nuclear Enerav Company o,,, 't. own,r P.O. Box 128 WaterfoM"'Ct. 06385 ] Sheet of pooress) 2 I M 1 stone

uni, 2.

Pi,ot P.O. Box 128 Watettord, Ct. 06385 Nort@M Nuclear Enerqy Co. [rWO-A'2 Ngs-3. Work Performed l>y P.O. Box ITB*Waterford, Ct. maaa om=*a rS a'aa *N a'c-NN 4. Ident1'ication of System 5. (a) Applicable Construction Code AD * / 19 ~7 3 Edition-Addenda, Code Cases - (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 19.3!?. 467-. Addenda Code Cases 6. Identification of Mmponents Repstred or Replaced, and Replacement Components Name of Name of Mf ra. Str. Net'l. CRN Other Year Repaired. ASME Code Component

Mir, No.

Bd. No. Iderrti- . Built

Replaced, Stamped No.

fication or (Yes or No) Replacement 7 -S&4 t8 fY M?E b.dmaf /64, ~ ~ ~~ f 7. Description of Work A E I Nominaiop.reting ressure 5 other D B. Tests Conducted: Hydrodatic O Pneumatic O p Pressure. M ps! Test Temp. 79 *F 9. Remarks eppacao= uanu acturere pate Repons to me enacreci r CERTIFICATE OF COMPLIANCE bN conforms to Section XI of the We certify that the statements mt;Ce in this report are correct brid this .gg S g ed, ._.,.p.s-.,, ,... u CERTIFICATE OF INSPECTION 1, the undersigned, holding a valid commission issued by the Nationet Board of Boiler and Pressure Vessel Inspectors and the State or Province of O7 . employed by NY I of d ,19 AdfM4a Love inspected the. Mo0% *# described in this Report on papaints;os hopiscementtsll and state that to the best of my knowledge and belie 1,this repair or replacement has been constructed in accordance with Section XI of the ASME Code. By signing this certificate, neither t w inspector not his employer makes any warranty, espressed or implied, concern. Ing the repair or replacement described in this Report. Furthermore, neither the inspector nor his employer shall be liable in sny manner for any personal injury or property damage a loss of any kind arising from or connected wnn thisinsoection. OI/// 9 EA Commissions NOI , fspector) (Mate or Provmce. halenal Boardi Date Note: $vpplementet sheets in form of Hats, sketches, or drawings may tie used provided (1) slae is 8% in. X 11 in., (28 information in items 1 throush 4 on this data report is incluced on sech sheet.and (31 each sheet is numtiered and the number of sheets is recorded et the top of this form.

I-e- .'g. . y (: I-1 l FORM NIS 2 OW.'sER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 9/h7[.5 / 3 0.ner Northeast Nuclear Enercy Company o,,, L 1 P.O. Box 126 Waterford,"'Ct. 06385 / f 3,,,, m 2 Millstone - unit - 2. Piant .P.O. Box 128 Waterfbrd, Ct. 06385 NortKEMi Nuclear Enerqv Co. 50- A12. -8f - //4 O f 3. Work Performed by P.O. Box I?BWaterford, Ct. a'a~ omaa==taa r o 'wson a..tc. AW O ~ 4, Identification of Sy 5. {a) Applicable Construction Code AM F 19 ? / Edition. Addenda, Code Cases (b) Applicable Edition of Section XI Utilized for Repairs or Replacements-19% 447 Addenda, Cods f'.ases l E. Identification of Components Repaired or Replaced, and Replacement components l* Name of Name of . Mfrs. Ser. Nat'l. CRN Other Year Repaired. ASME Code l Component Mfr. No. Bd. No. Identi-Built Repisced. Stamped No. fication or (Yes or No! Replacement - 2 ~Ac*/2-8 / W E- /f}l %pm,re cf Y r L 1 l ~ l l CV'Ek!bfJW VH b b I A ^ 2. Description of Work B. Tests conducted: Hydrostatic 0 Pneumatic O ' Nominal Op,erating Pres'sure M Other O Pressureho psi Test Temp. /7e"

  • F l

9. Remarks l pppocante Manuf acturers Data kaports to be attaches) CERTIFICATE OF COMPLIANCE conforms to Section XI of the ' We certify that the statements made in this report are correct and this I ' E.8hd/ A; nasa [ b _,3, e 3 @ner or Ovrners Designet) ' tuse pie) CERT!FICATE OF INSPECTION l 1 1, the undersigned, holding a valid commission issued by the National Board of Boil <r v.nd Pressure Vessel inspectors and the Stat. - or Province of f , employed by of MD @l ,tsE /h e rA d have inspected thA f r am described in c, a; >rt on (Aspairls)or Reemcomenusi! and state that to the best of my knowledge and beMef,this repair or repleesment has been constructed in accordance with Section XI of the ASME Code. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, concern-ing the repair or replacement described in this Report. Furthermore, neither the Inspector rior his employer shall be liable in any manner for any persarial injury or property damage or a loss of any kind arising from or connected wp.h thisjnspection. N b '> b b Commissions Date '/ 4/ ' Anspector) E.we or Provence.Nannal Boarm i Supplemental sheets in forrn of lists, sketches, or drawings mov be weed provided (1) size is BM In. X 11 in., Note: (2) information in items 1 through a on shis date report is included on each sheet, and (3) each sheet is numtiered end the number of meets is recorded at the sop of this form, l l, l

e 4 4 l l FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI May /ff gs, owner Northeast Nuclear Enerav Company o,,, s. / P.O. Box 128 Waterfoi d",,*',Ct. l" 06385 sheet / of c roo, ) 2 Millstone unit 2. Plant

P.O. Box 128 Watertbrd, Ct. 06385 NortM3YY. Nuclear Energy Co.

p/ 7 -& P-ORW 3 3. Work Performed by P.O. Box ITB"Waterford, Ct. asa-o'oeanzei. oar.oe+= s aa eic. II ecorass) 4. idsntificationof System l E. (a) Applicable Construction Code. 19 Nition. Addenda, Code Cases l (b) Applicable Edition of Section XI Utilized for Repairs or Replace.ents - 19_. ' Addenda, Code Cases 6. Identification of Components Repaired or Replaced, and Reptacemaat Components i, Name of Name of Mfrs. Ser. Nat'l. CRN Other Year

Repaired, ASME Code Component Mfr.

No. Bd. No. Identi-Built

Replaced, Stamped No.

fication or (Yes or No) Replacement '{ 2 '/**#'#lE-d h51/ lA85Z- /f 2/ bf.tus./ Y / S! O 't er r"W'/ /M [

7. ' Description of Work B.

Tests Conducted: Hydrot*.atic O Pneumatic O Nominal Oppating Pressure 43 Other O' ' Pressure d'M psi Test Temp *' 'P 9. Remarks pppucsois Manufacturers Data Repons to be attached) CERTIFICATE OF COMPLI.CE AM-conforms to Section XI of et We certify that the statements madt in1 is report are correct and this [' '"'P''"*"U ASME Cods 1 ] 19 ' 0 NSN ' OAbO' Signe l' (Owner or Ownern Desagtte) Tsue (Datel CERTIFICATE OF INSPECTION J ie I, the undersigned, holding a valid commission issued by the futlanal Board mL Boiler and Pressure Vesset inspectors and the State 8 of CI

employed by or Province of M2 19$

M6d have ;nspected the /% e jub'- e,wibed in this Report on theputst o, nepiscernentis)! and state that to the best of my knowledge and belief,this repair or replacement has been constructed in accordance with Section XI of the ASME Code. By signing this certificate, neither the inspector por his employer makes any warranty, expressed or implied, concern-l ing the repair or replacement described 5 this Report. Furthermore, neither the lhspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. b ///I bM Commissions Date N ~ ~ (J pnapector) cstate en Pronnce, Naponal Board) V Note: Supplemental sheets la form of lists, sketches, or drawinsp may tie used provided (11 slam is 8% in. X 11 In., (2) information in items 1 through 4 on this date report is included on each sheet, and (3) each sheet is numtiered end the number of shesis is recorded et the too of this form.

v m j-3 i.,' ACP-QA-2.4 Page 19 Rev. 0 '3

    • Y l
/

FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code SectioriXI N No ATMc%7" tlUt%t%f ENOL /eV ' l'o Date g, g,n,f ~ l RC,60% 128, LeQIC0fD CT ' OGbW ss,,, I og /VIi Ll6Id ^J6 Unit 2 2. Plant kO.%Y l2t's. LUY$FCWu$T OW'$ dWNYUMS"MW@ WW MW W $0 ** O' O

2. : Work Perictmed t ae Mapaer Organuahon P.O No. Joe rJG., elC.

RE%$N CorJTAIMMEW HATCH 1rMcTU(L6 4 Identifiestien ef 5ystern D W 7(od'l-d*6C M 19 Editi9n Addenda, Code Cases

5. ' la) Applicable Construction Code.

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements-1912. D S3 Addenda, Code Cases

6.. Identifl.:stion of Components Repaired or Replaced,and Replacement Components Name of Name of Mfrs. Ser, Nat'l.

CRN Other Year

Repaired, ASME Cot'e Compor;ent Mf r.

No. . Ed. ' No. Identi-Built Replaced. S tariped No. fication or (Yes oc No! Replacement '*dTsur ef 5701 19 71 REf'MGMCMT NO ipuTanNros%T~j C 6 7.1-h ~ . E.aod. e TT 4 reshtes "J.: Description of work wEWO AswrW oF N h3M Emm6, m9 W50m furtf f6Ws 7. B. Tens Conducted: Hydrostatic 0 Pneumatic Gf Nominar o ersting Pressure O Other O s' Pressure 9 pst Test Temp. AN '* F psoi.cacie Manufacturers cata Pepons to c.e enacriem CERTIFICATE OF COMPLIANCE MC ccnforms to Section XI ef.*.e We cenify that the statements mode in this

  • net are correct and this "8*"'"'S*""3 ASME Codr/

99 b# J M D 19 Signed y m-er o, a-o, s e.s,ee, y u ne, CERTIFICATE OF INSFECTION l . 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the Statt

  1. M

?I cf f7 _ employec' ey or Provir ce of / Adtt "/4 A M have inspected the M A NNM described in this Report on 1S (F stairtsp or Replacemenstsg i and state that to the best of rny knowledge and belief,this repair or replacernent has bren construc* edin accordance with Section XI of the ASME Code. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied, cencern. Ing the repair or replacement deteribed in this Report. Furthermore, neither the Inspector nor his employer shall be fiabfe ist any mar:r:er for any personalinjury or property damac or a loss of any kind arising from or connected with thia inspection. b 04te # "M " 2" Commissions d unacecmt) (State or Pr6vence.Naucnet Scarg] Supplemental sheets in form of lists, sketches, or drawings mov be used provided (1) size is 8% In. X 11 in., Note: (0) information in Iterns 1 through 4 on this data report is included on es :h sheet, and (3) each sheet is numbered and the number of sheets is recorced at *he too of this form. FIGURE 7.2

F, - t & a s t ,r p \\ u r 7' FORM NIS 2 OWNER'S REPORT Of REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI Mih Northeast Nuclear Eneray Com.ny o,,, 1. owner P.O. Box 128 Wa te rfo f"d** C t. 06385 / / 33,,, 2 Millstone unit 2.

Pian, P.O. Box 128 Waterfbrd, Ct. 06385 Nort#45W. Nuclear Enerqy Co.
  1. me

,u z - St- /2r 23 3. Work Performed by P.O. Box M"8Waterford, Ct. Sa*' o's===*n P.O NO JoD No.,etc. ecoresan 4 lduntification of System 9 ~T O'h> $F1'E W e~ [ b 72 4 umrb 5. (a) Applicable Construction Code Mc'N 19 ~7 / Edition,__ Addenda, Code Cases (b) Applicable Edition of Section XI Utilised for Repairs or Replacements - 195.f. Uf2I Addenda, Code (kses 6. Identifiestion of Components Repaired or Replaced, and Replacement Components Name of Name of Mfrs. Ser. N a t'l. CRN other Year

Repaired, ASME Code Component Mir.

No. Bd. No. Identi-Built Replaced. Stamped No. fication or (Yes or No! Replacement Tw vx t* c

  • or b c' f*s e'.ad. n as&

4* / P _ N ? HY 'Y bY r e*ott e/H f r C,7 s WW> h5 G ' N O Wi! V SY bC '" " l b d S E bbWG t'- 1. Description of Work 8. Tests Conducted: Hydrostatic 0 rneumatic S Nominal Operating P' essure O other O Pressure & psi Test Temp. 70 'F 9. Remarks MN as McW aM*>s.'W h i rw /Cs c' h ' S Z' _.9A &y '7". (S%% haag; Cadre ManWfactWfers Data NepOfts to ce attached) - vi x 2 f. cs r c' b PM d Z S*-8W /%Ac S /W v c{A991 CERTIFICATE OF COMPLI ANCE F# /M D' conforms to Section XI of thf We certify that the statements made in this repor Se correct and this e 4 repair or replacement) Y /7W"Y - Wd &. N5 .= ,3g 3;g,g Qwner or Owners Deogneep g5 title (Cais' CERTIFICATE OF INSPECTION t, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the Sta e of or Province of /~' , employed by b hat M'- have inspected theN [Fiepairtsp or r<eplacemenusij ,19 described in this Report on and state that to the best of rny knowledge and belief, this repair or repit.ernent has been constructed in accordance with Section XI of the ASME Code. By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or implied. concern-ing the repair or replacement described in this Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage rpo of any kind arising from or connected with this ection. b ///I Date *b rW' Commissions (Siate or Province, Natachal Boardi jinspecico Supplemental sheets in f orm of !!su. sketches, or rJtavvings may t,o used revided (1) size Is BM in. X tt in., fute: (2) informauen in items 1 through 4 on this data report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. r 44

4 [ n s a I FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI fMgp Northeast Nuclear Eneroy Company o,,, 1. own,, P.O. Box 128 Waterford"* Ct. 06385 f l 2 M111 stone una

a. Plant P.O. Box 128 Water"fbrd, Ct. 06385 Nort@iiM. Nuclear Eneroy Co. A(gd-4/ 2. - FF -//zz 7

? s. Work Performee by P.O. Box F28')Waterf ord, Ct. mm orsaaaaoa ro nosoo a...eic. pooress) 4 8N 0 6M *'" / 4 Identification of System (a) Applicable Construe

  • ion Coda #WIE 19

~7 / Edition. Addenda, Code Cases 5. (b) Applicable Edition of Section XI Utilhed for Repairs or Replacements - 192,' C 6'/ Addenda, Code Cases 6. Identification of Components Repaired or Replaced, and Replacement Components Name of Name of Mfrs. Ser. N a t'l. CRN Other Year

Repaired, ASME Code Component Mfr.

No. Bd. No. Identi-Built Replaced. Stamped No. fication or (Yes or No) Replacement N 7/ A h o haiY-k 0. $ ~ / i 7. Description of Wnrk A M M E. Tests Conducted: Hydrostatic O Pneumatic d Nominal Operating Pressure O other O 4O psi Test Temp. "7C* F s 9. Remarks M4'V 3 W NfdBWW MW A$MU I, Pressure pppucante Manutactweers Da:a Feports to De attacneo) L CERTIFICATE OF COMPLIANCE

  1. M 8NN conforms to Section XI of the We cutify thet t% stetemenn made in this report are correct and this

/ gepair cr replacement h/Y Ars YE '~1 /d V ,39 / Sgg / Tane (Cate) (Owner or owners Desegneet CERTIFICATE OF INSPECTIOil I, the undersigned, holding a valid commission Issued by the National Board of Boiler gnsi Pressure Vessel Inspectors and the State cf bI . ernployed by or Province of f 19 NU described in this Report en O/d@dd have inspected the lNepairtsp or Replacement (s)} and state that to the best of rny knowledge and belief,this repair or replacement has been constructed in act.ordance with Secticin XI cf the ASME Code. By signing this certificate, neither the Inspector nor his employer makes any warranty, eApressed or implied, concern-ing the repair or replacement described in this Report. Furthermore, neither the inspector nor his employer shall be fiable in any manner f or any personal injury or property damage or 3 loss of any kind a.ising from or connected with this inspection. C 7 //FI YA> Commissions N/I nspector) Date (Staie or Prevence.Naponal tosec) Supplernental sheets in form of lisu. sketches, ce crewings may be used provided (1) size is 8% In. X 11 in., N o te: ( (2) Information In items t through 4 on this data report es included on each sheet and (3) each sheet is numbered and the number of sh"ets is recorded at the top of this form. ______}}

Retrieved from "https://kanterella.com/w/index.php?title=B13325,_Inservice_Insp_Rept&oldid=3890985"