Semantic search

Jump to navigation Jump to search
 Issue dateTitle
L-2023-155, Supplement to Response to Request for Additional Information, Revised NextEra Common Emergency Plan, and Revised Site-Specific Emergency Plan Annexes Regarding License Amendment Request for Common Emergency Plan Consistent with NUREG-065428 November 2023Supplement to Response to Request for Additional Information, Revised NextEra Common Emergency Plan, and Revised Site-Specific Emergency Plan Annexes Regarding License Amendment Request for Common Emergency Plan Consistent with NUREG-0654,
L-2023-162, Response to 50.69 2nd Round of Rals21 November 2023Response to 50.69 2nd Round of Rals
ML23275A1152 October 2023Improved Technical Specifications Conversion, Section 3.0, LCO and SR Applicability, Revision 2 - Volume 5
ML23275A1222 October 2023Improved Technical Specifications Conversion, Section 3.7, Plant Systems, Revision 2 - Volume 12
ML23275A1262 October 2023Improved Technical Specifications Conversion, Section 5.0, Administrative Controls, Revision 2 - Volume 16
ML23219A0031 September 2023SLRA SER Rev 1
ML23205A1263 August 2023Amendment 32 to Updated Final Safety Analysis Report, Chapter 2, Site Characteristics (Public)
ML23200A14621 July 2023Safety Evaluation Related to the SLRA of St. Lucie Plant, Units 1 and 2
ML23129A8318 May 2023NRR E-mail Capture - Audit Plan - St. Lucie ITS Conversion LAR - Setpoints
ML23096A0431 April 2023Amendment 32 to Updated Final Safety Analysis Report, Chapter 1, Introduction and General Description of Plant Site Characteristics
L-2022-043, Subsequent License Renewal Application Revision 1 - Supplement 17 April 2022Subsequent License Renewal Application Revision 1 - Supplement 1
L-2022-018, Amendment 27 to Updated Final Safety Analysis Report, Chapter 1, Introduction and General Description of Plant4 March 2022Amendment 27 to Updated Final Safety Analysis Report, Chapter 1, Introduction and General Description of Plant
L-2021-177, Amendment 31 to Updated Final Safety Analysis Report, Chapter 1, Introduction and General Description of Plant Site Characteristics11 November 2021Amendment 31 to Updated Final Safety Analysis Report, Chapter 1, Introduction and General Description of Plant Site Characteristics
ML22013A67311 November 2021Amendment 31 to Updated Final Safety Analysis Report, Chapter 2, Site Characteristics
ML21265A29215 September 2021Enclosure 2 - Volume 7 - St. Lucie Plant, Units 1 and 2, Improved Technical Specifications Conversion ITS Section 3.2 Power Distribution Limits, Revision 0
ML21265A29715 September 2021Enclosure 2 - Volume 12 - St. Lucie Plant, Units 1 and 2, Improved Technical Specifications Conversion ITS Section 3.7 Plant Systems, Revision 0
ML21265A29515 September 2021Enclosure 2 - Volume 10 - St. Lucie Plant, Units 1 and 2, Improved Technical Specifications Conversion ITS Section 3.5 Emergency Core Cooling Systems (Eccs), Revision 0
ML21265A29415 September 2021Enclosure 2 - Volume 9 - St. Lucie Plant, Units 1 and 2, Improved Technical Specifications Conversion ITS Section 3.4 Reactor Coolant System (Rcs), Revision 0
ML21265A29015 September 2021Enclosure 2 - Volume 5 - St. Lucie Plant, Units 1 and 2, Improved Technical Specifications Conversion ITS Section 3.0 LCO and SR Applicability, Revision 0
ML21265A30115 September 2021Enclosure 2 - Volume 16 - St. Lucie Plant, Units 1 and 2, Improved Technical Specifications Conversion ITS Chapter 5.0 Administrative Controls, Revision 0
ML21027A22617 February 2021Approval of Alternative to ASME Code, Section XI to Use an Alternative Inservice Inspection Schedule for the Reaction Vessel Closure Head Bolting
ML20259A29818 November 2020Issuance of Amendment No. 205 Regarding Modification of the Reactor Coolant Pump Flywheel Inspection Program
ML20268A11711 September 2020Amendment 26 to Updated Final Safety Analysis Report, Chapter 1, Introduction and General Description of Plant
ML20099A34825 June 2020Safety Evaluation for Relief Request for Fifth Ten-Year Inservice Inspection (ISI) Interval - Alternative Risk-Informed Inservice Inspection Program for Class 1 and 2 Piping Welds
ML20141L6464 May 2020Amendment 30 to Updated Final Safety Analysis Report, Chapter 1, Introduction and General Description of Plant Site Characteristics
ML20023B37819 February 2020Safety Evaluation for Relief Request RR-16, Alternate Repair of 2B Boric Acid Makeup Pump Revision for the Fourth 10-Year Inservice Inspection Interval
L-2019-091, License Amendment Request to Modify the Reactor Coolant Pump (RCP) Flywheel Inspection Program Requirements9 October 2019License Amendment Request to Modify the Reactor Coolant Pump (RCP) Flywheel Inspection Program Requirements
ML19254B53330 September 2019Safety Evaluation for Relief Request RR#15, Revision 0, Regarding Limited Piping Examinations
ML19218A2746 August 2019Notification of Inspection and Request for Information
ML19113A0992 July 2019Issuance of Amendments Regarding Adoption of Risk-Informed Completion Times in Technical Specifications
ML19115A28131 May 2019Safety Evaluation for Relief Request No. 6 for the Fifth 10 Year Inservice Inspection Interval
ML18256A09830 October 2018Safety Evaluation for Relief Request No.5 for the Fifth 10-Year Inservice Inspection Interval
ML18173A1797 August 2018OEDO-17-00070 - Notice of Issuance of Director'S Decision, 2.206 Petition for Emergency Enforcement Action Per 10 CFR 2.206 at Listed U.S. Reactors with Forged Components and Parts Manufactured at France'S AREVA-Le Creusot Forge and Japan C
ML18173A1752 August 2018OEDO-17-00070/SRM-DD-18-03 - Director'S Decision, 2.206 Petition for Emergency Enforcement Action Per 10 CFR 2.206 at Listed U.S. Reactors with Forged Components and Parts Manufactured at France'S AREVA-Le Creusot Forge and Japan Casting
ML18199A19218 July 2018U2 ISI 2018003 RFI Information Request Rpc
ML18107A4046 June 2018OEDO-17-00070 - Proposed Director'S Decision on Areva Forgings 2.206
ML18107A4026 June 2018OEDO-17-00070 - Letter to Petitioner on Areva Forgings 2.206
L-2018-049, Application to Add Limiting Condition for Operation (LCO) 3.0.6 to the Technical Specifications29 May 2018Application to Add Limiting Condition for Operation (LCO) 3.0.6 to the Technical Specifications
L-2018-110, Submittal of Fifth Ten-Year Inservice Inspection Interval ISI Program Plan, Revision 02 May 2018Submittal of Fifth Ten-Year Inservice Inspection Interval ISI Program Plan, Revision 0
L-2018-069, Fifth 10-Year Interval - Inservice Testing (1ST) Program Plan30 March 2018Fifth 10-Year Interval - Inservice Testing (1ST) Program Plan
ML18018A03326 January 2018Safety Evaluation of Relief Requests for the Fifth 10-Year Inservice Testing Program (EPID L-2017-LLR-0113; L-2017-LLR-0017, L-2017-LLR-0018, L-2017-LLR-0119, L-2017-LLR-0120, L-2017-LLR-0121, and L-2017-LLR-0122)
ML17263A12027 October 2017Inservice Inspection Plan Fourth 10-Year Interval Relief Request No. 16 (CAC No. MF9827; EPID L-2017-LLR-0044)
L-2017-183, Fifth 10-Year Inservice Testing (IST) Program Interval Relief Requests PR-01 Through PR-06, and PR-09,6 October 2017Fifth 10-Year Inservice Testing (IST) Program Interval Relief Requests PR-01 Through PR-06, and PR-09,
ML17235A5655 October 2017Issuance of Amendments Regarding Technical Specification Changes Related to Component Cyclic or Transient Limits
ML17219A17431 August 2017Relief from the Requirements of the ASME Code Regarding Relief Request 12 for the Fourth 10-Year Inservice Inspection Interval
L-2017-121, Proposed Alternative for the Use of Encoded Phased Array Ultrasonic Examination Techniques in Lieu of Radiography24 July 2017Proposed Alternative for the Use of Encoded Phased Array Ultrasonic Examination Techniques in Lieu of Radiography
ML17171A2393 May 2017St. Lucie, Unit 1, Updated Final Safety Analysis Report, Amendment No. 28, Chapter 1, Introduction and General Description of Plant Site Characteristics
L-2017-074, St. Lucie, Unit 1, Updated Final Safety Analysis Report, Amendment No. 28, Chapter 1, Introduction and General Description of Plant Site Characteristics3 May 2017St. Lucie, Unit 1, Updated Final Safety Analysis Report, Amendment No. 28, Chapter 1, Introduction and General Description of Plant Site Characteristics
ML17027A0787 April 2017Issuance of Amendments Regarding Technical Specifications for Inservice Testing Programs (CAC Nos. MF8202 Through MF8209)
L-2016-212, License Amendment Request to Relocate the Component Cyclic and Transient Limits from the Technical Specifications to License-Control Documents22 December 2016License Amendment Request to Relocate the Component Cyclic and Transient Limits from the Technical Specifications to License-Control Documents