ENS Event | |
|---|---|
04:00 Aug 23, 2013 | |
| Title | Part-21 Notification - Unqualified Material Used In Electrical Penetration Assemblies |
| Event Description | The following information was received via fax:
Material supplied to MTCN [Mirion Technologies (Conax Nuclear)] by approved sub-suppliers audited to NCA-3800 by MTCN was considered to be ASME [American Society of Mechanical Engineers] qualified source material for Section II and Section III requirements. During triennial survey of MTCN by the ASME for renewal of our N Type Certificates of Authorization, it was identified by the ASME survey team that material supplied by two (2) MTCN approved sub-suppliers should be considered unqualified source material. At that time, MTCN's Quality Program did not include the use of unqualified source material. Testing of the coupons for materials used with the basic components supplied to the operating plants is expected to be completed within the next 30 days. The potentially defective components are electrical penetration headerplates, mounting weldment rings and weld neck flanges for mounting the electrical penetration assemblies. The affected facilities are: Oconee, Ginna, Crystal River, Point Beach, Monticello, Cook, and Turkey Point. Point of contact: John MacDonald 716-681-1973
MTCN has determined the material supplied to U.S. plants does not impact the material safety or performance of the EPAs (Electrical Penetration Assemblies) delivered. Chemical and mechanical re-verification test results to date indicate there have been no test failures compared to the ASME SA-240 material requirements. Notified R1DO (Welling), R2DO (Seymour), R3DO (Riemer), and NRR Part 21 Group (email only).
MTCN has determined that chemical and mechanical tests indicate that the materials used in the EPAs delivered met ASME requirements and does not impact safety or performance of the delivered devices. Due to the evaluation results, the vendor submitted this update to provide final closure of this Part 21 issue. Notified R1DO (Lilliendahl), R2DO (Masters), R3DO (Orlikowski) and the Part 21 group (via email). |
| Where | |
|---|---|
| Mirion Technologies Conax Nuclear Buffalo, New York (NRC Region 1) | |
| Organization: | Mirion Technologies Conax Nuclear |
| Reporting | |
| 10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component | |
| Time - Person (Reporting Time:+8.9 h0.371 days <br />0.053 weeks <br />0.0122 months <br />) | |
| Opened: | John Macdonald 12:54 Aug 23, 2013 |
| NRC Officer: | Mark Abramovitz |
| Last Updated: | Feb 5, 2014 |
| 49301 - NRC Website | |
Mirion Technologies Conax Nuclear with 10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component | |
WEEKMONTHYEARENS 493012013-08-23T04:00:00023 August 2013 04:00:00
[Table view]10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component Part-21 Notification - Unqualified Material Used in Electrical Penetration Assemblies 2013-08-23T04:00:00 | |