ENS 52324
ENS Event | |
|---|---|
05:00 Aug 30, 2016 | |
| Title | Part 21 - Potential Issue With Seismic Qualification Of Type 546Ns Electro-Pneumatic Transducers |
| Event Description | The following was received via email:
Pursuant to 10 CFR 21.21(a)(2), Fisher Controls International LLC ('Fisher') is providing required written interim notification of a potential failure to comply concerning Type 546NS Electro-Pneumatic Transducer Qualification Reports. On August 30, 2016, Fisher became aware of a potential issue with the past qualification of the Type 546NS Transducers. Fisher's published seismic literature and certifications, based on testing by a 3rd party laboratory, exhibit inconsistencies when compared to more recent testing completed by Fisher. Regardless of these discrepancies, the Type 546NS Transducer remains qualified to perform before and after seismic loading. The scope of this investigation pertains only to operability during seismic events. An extent-of-condition investigation is underway and 546NS testing data is being evaluated to determine if further testing is required. Fisher will complete the investigation by November 27, 2016 and, if necessary, will complete additional testing by February 10, 2017. Should there be any further questions concerning this matter, please contact Benjamin Ahrens, Manager, Quality by email at Benjamin.Ahrens@Emerson.com or via phone at 641-754-2249.
The following was received via email: Pursuant to 10 CFR 21.21(a)(2), Fisher Controls International LLC ("Fisher") is providing an update to a previous written interim notification of a potential failure to comply concerning Type 546NS Electro-Pneumatic Transducer Qualification Reports. On August 30, 2016, Fisher became aware of inconsistencies exhibited by prior qualification reports of the 546NS. A review of all previous Type 546 qualifications has been completed to reaffirm the qualification of the device for operation during seismic events. Based on this review, the 546NS remains qualified to perform before and after seismic loading. Additional testing is required to confirm if the device is capable of operating during an event. This additional testing is scheduled to be completed by February 10, 2017. Once this additional testing has been completed and operability status determined, an appropriate announcement will be made pursuant to 10CFR21 reporting requirements. Should there be any further questions concerning this matter, please contact Benjamin Ahrens, Manager, Quality by email at Benjamin.Ahrens@Emerson.com or via phone at 641-754-2249. Notified the R1DO (Dwyer), R2DO (Heisserer), R3DO (McCraw), R4DO (Taylor), Part 21/50.55 Reactors (via email) and Part 21 Materials (via email).
The following is a summary of information that was received via email: Pursuant to 10CFR21.21(a)(2), Fisher Controls International LLC ('Fisher') is providing required written interim notification of a potential failure to comply concerning Type 546NS Electro-Pneumatic Transducer Qualification Reports. This notification serves as a follow-up to a similarly titled report dated October 27, 2016. Fisher initiated in-house seismic testing to analyze the performance of the device and associated mounting hardware when exposed to high-level seismic activity. These tests concluded on February 10, 2017. Test data analysis is still underway. However, at the time of this publication, preliminary observations and conclusions can be made. The device itself, when rigidly mounted, does not exhibit natural frequencies in the tested frequency range consistent with previous qualification literature. When mounted to the standard 546 mounting bracket, the tested assemblies do not exhibit natural frequencies below 60 Hz. During the course of testing, additional questions were raised regarding the configuration of the mounting bracket. These questions are currently being investigated. Questions regarding 546NS mounting will be addressed on a case-by-case basis with individual customers. Further analysis and verification of the test data is needed before Fisher can make specific claims regarding the operability of the 546NS during high-level seismic loading. Fisher will complete the investigation by April 13th, 2017. Should there be any further questions concerning this matter, please contact Benjamin Ahrens, Manager, Quality by email at Benjamin.Ahrens@Emerson.com or via phone at 641-754-2249. Notified the R1DO (Powell), R2DO (Bartley), R3DO (Jeffers), R4DO (Pick), Part 21/50.55 Reactors (via email) and Part 21 Materials (via email). |
| Where | |
|---|---|
| Emerson Fisher Controls Intl Llc Marshalltown, Iowa (NRC Region 3) | |
| Organization: | Emerson Fisher Controls Intl Llc |
| Reporting | |
| 10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component | |
| Time - Person (Reporting Time:+1403.72 h58.488 days <br />8.355 weeks <br />1.923 months <br />) | |
| Opened: | Kim Sagar 16:43 Oct 27, 2016 |
| NRC Officer: | Daniel Mills |
| Last Updated: | Feb 24, 2017 |
| 52324 - NRC Website | |
Emerson Fisher Controls Intl Llc with 10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component | |
WEEKMONTHYEARENS 523242016-08-30T05:00:00030 August 2016 05:00:00
[Table view]10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component Part 21 - Potential Issue with Seismic Qualification of Type 546Ns Electro-Pneumatic Transducers 2016-08-30T05:00:00 | |