ML20143A138
| ML20143A138 | |
| Person / Time | |
|---|---|
| Site: | 07103098 |
| Issue date: | 03/11/2020 |
| From: | Nuclear Fuel Industries, Ltd |
| To: | Division of Fuel Management |
| Garcia-Santos N | |
| Shared Package | |
| ML20141L696 | List: |
| References | |
| NFK-MPCF-2003002 | |
| Download: ML20143A138 (8) | |
Text
NFK-MPCF-2003002 Issued on March 11, 2020 Cross Reference Table Between the Regulation Paragraphs and The Safety Analysis Report Paragraphs Nuclear Fuel Industries, Ltd.
NFK-MPCF-2003002 Items of Applicable Type IAEA paragraphs of the Justifications regulation safety analysis report The package is designed as object which can be transported by generally used vehicles or transporting devices such as forklift and pallet trucks. The package is 607 Chapter I - C (12) equipped with lifting attachments on the four corners of the lid of the outer receptacle which can be manipulated with hooks of a crane or a chain block to lift the package. Thus, the package can be handled with ease and in safety.
608 No failure of lifting attachments in routine Chapter II - A.4.4 conditions of transport and no impact on safety if 609 failure occurs.
The only protruding portions of the package are its legs provided on the external bottom surface of the outer receptacle. These legs are useful elements of the package; they serve as 610 Chapter I - C (11) positioning blocks when two packages of this General model are stacked one on top of another. The Requirements package can easily be decontaminated since the external surfaces of the package are configured with stainless steel plates.
The global rectangular shape of the packaging 611 Chapter I - C (6) prevents any retention of water.
There are no features added to the package 612 Not applicable during transport.
The package strength under routine conditions 613 Chapter II - A.4.7 of transport is ensured.
Chapter I - D (3) and Materials are compatible with each other and 614 Chapter II - A.4.1 with the radioactive contents.
615 Not applicable Package has no valve.
The design takes into account ambient Chapter II - A.4.6 and 616 temperatures and pressures for routine Chapter II - B.4 conditions of transport.
NFK-MPCF-2003002 Items of Applicable Type IAEA paragraphs of the Justifications regulation safety analysis report The dose equivalent rate on the external surfaces of the package is 0.028 mSv/h or less and will never exceed 2 mSv/h.
617 Chapter II - D The dose equivalent rate at any location one General meter from any of the external surfaces of the Requirements package is 2.56 Sv/h or less and will never exceed 100 Sv/h.
The radioactive materials do not have any other 618 Not applicable dangerous properties.
Transport 619 to 621 Not applicable The package is not transported by air.
by air The package has the external dimensions: 1144 636 Chapter I - C mm in length, 830 mm in width, and 1060 mm in height.
The inner receptacle and the outer receptacle of the package are firmly connected with their respective lid by means of rod bolts. Tools such as wrench should be used to loosen or tighten these rod bolts, and a crane or other hoisting devices is required to remove the lid of the outer Chapter II - A.4.3 and 637 receptacle. Thus, there is no room for erroneous Chapter IV - A opening of the lid. Once the outer receptacle has Requirements been joined with the lid, a seal is applied to a for Type A zone covering both the lid and the body of the packages outer receptacle. In case that the outer receptacle is opened, the operation of opening becomes objectively visible.
The package can be attach with tie down 638 Chapter I - C devices.
NFK-MPCF-2003002 Items of Applicable Type IAEA paragraphs of the Justifications regulation safety analysis report The brittle temperature for the silicone rubber provided at the containment boundary of the package is lower than -50°C. Thus, the material Chapter II - A.4.2 and will not suffer cracking or fracture in an 639 B.3 environment of -40°C.
The same silicone rubber can resist a temperature of 180°C. Therefore, it will not suffer cracking or fracture in an environment of +70°C.
The GP-01 package is in accordance with the 640 Chapter I - Table I-1 following standards: IAEA, JIS for the design and manufacturing.
The inner receptacle of the package is firmly 641 Chapter II - A.4.3 connected with their respective lid by means of rod bolts.
The package does not contain any special form 642 Not applicable radioactive material.
Requirements The containment system is a part of the 643 Not applicable for Type A package.
packages 644 Not applicable There is no internal power in the cavity.
The calculated stresses do not exceed stress 645 Chapter II - A.4.6 limits.
646 Not applicable Package has no valve.
647 Not applicable Package has no separated radiation shield.
There is no loss or dispersal of the radioactive 648(a) Chapter II - A.5 contents observed after normal conditions tests.
Normal conditions of transport do not increase 648(b) Chapter II - D the maximum radiation level at the external surface of the package by more than 20 %.
649 Not applicable The package does not contain liquids.
650 Not applicable The package does not contain liquids.
651 Not applicable The package does not contain gases.
NFK-MPCF-2003002 Items of Applicable Type IAEA paragraphs of the Justifications regulation safety analysis report All the hypotheses taken into account are 673(a) Chapter II - E described and justified.
The package has the external dimensions: 1144 673(b)(i) Chapter I - C mm in length, 830 mm in width, and 1060 mm in height.
The inner receptacle and the outer receptacle of the package are firmly connected with their respective lid by means of rod bolts. Tools such as wrench should be used to loosen or tighten these rod bolts, and a crane or other hoisting Requirements devices is required to remove the lid of the outer Chapter II - A.4.3 and for package 673(b)(iii) receptacle. Thus, there is no room for erroneous Chapter IV - A containing opening of the lid. Once the outer receptacle has fissile been joined with the lid, a seal is applied to a materials zone covering both the lid and the body of the outer receptacle. In case that the outer receptacle is opened, the operation of opening becomes objectively visible.
570 The package is not excepted from the 674 Not applicable requirements for package containing fissile 675 material.
676 Chapter II - E The fissile contents are known and described.
677 Not applicable The package contents are not irradiated fuel.
678(a) The package keeps its integrity after normal Chapter II - A.9.1.4 678(b) conditions tests.
NFK-MPCF-2003002 Items of Applicable Type IAEA paragraphs of the Justifications regulation safety analysis report The package is constructed with metallic materials, mainly stainless steels as structural elements. The brittle temperature for the silicone rubber provided at the containment boundary of the package is lower than - 50°C. These materials will not suffer cleft or fracture in an Chapter II - A.4.2, 679 environment of -40°C.
B.4.3 and B.4.2 These metallic materials and the silicone rubber which resists a temperature of 180°C will not suffer cleft or fracture in an environment of
+38°C. Thus, the package will not suffer cleft or fracture at temperatures ranging from -40°C to
+38°C.
The leakage of water into the containment Requirements 680(a) Chapter II - E vessel has been taken into account in the for package criticality analysis.
containing The package does not contain uranium 680(b) Not applicable fissile hexafluoride.
materials 681 Chapter II - E.3.1 Specular reflection is considered in the study.
Calculations are made with the damaged 682 Chapter II - E3.1 package.
683 Not applicable The package is not transported by air.
684(a)
Number N obtained considering normal and 684(b)
Chapter II - E3.1 accidental conditions of transport, isolated and 685(a) array of packages is infinite.
685(b)
The rod bolts do not break, the lid of the inner receptacle remains in the initial position, and the 685(c) Chapter II - A.9.2 contents are not released outside from the inner receptacle.
Chapter I - A and 686 CSI is 0.
Chapter II - E3.1 NFK-MPCF-2003002 Items of Applicable Type IAEA paragraphs of the Justifications regulation safety analysis report The global cubical shape of the packaging 721 Chapter II - A.5.2 prevents any collection or retention of water. The water spray test is not realised.
Normal Drop test height is fixed at 1.2 m because the conditions of 722 Chapter II - A.5.3 package mass is less than 5,000 kg.
transport 723 Chapter II - A.5.4 The package complies with the stacking test.
Chapter II - A.5.5 and Package is not affected by this test (test 724 Appendix 1 - 4.3.2 performed).
The most penalizing cases are taken into 727 Chapter II - A.9.2 account during the drop tests and the Accident mechanical analysis.
conditions of The package is subjected to the regulatory fire 728 Chapter II - B.5 transport conditions (test performed).
Package is not leak tight and water immersion is 729 Chapter II - A.9.2 taken into account in the criticality study.
The package is not designed to withstand 501(a) Not applicable pressure over 35 kPa.
501(b) The acceptance and test program ensures Chapter III - E compliance of shielding, containment and 501(c) neutron poison system.
502 and The tests and certificates before transport are Chapter IV - A.2 503(a) described in Chapter IV - A.2 The package is not:
Requirements
- loaded with special form or low dispersible and controls 503(b) radioactive material, for transport Not applicable (c)(d) - loaded with uranium hexafluoride,
- loaded with irradiated material,
- a type B or a type C package.
The package does not transport any other 504 to 506 Not applicable goods.
The content does not have any other dangerous 507 Not applicable properties.
Requirements 508 to 509 Chapter IV - A.2 A non-contamination check of the external NFK-MPCF-2003002 Items of Applicable Type IAEA paragraphs of the Justifications regulation safety analysis report and controls surfaces of the cask is realised before the for transport package transport.
515 to 516 Not applicable The package is not excepted.
The package transports neither LSA or SCO 517 to 528 Not applicable material.
The package is not :
- loaded with special form or low dispersible radioactive material, 803 to 813 Not applicable
- loaded with uranium hexafluoride, Approval and - a type B or a type C package.
Administrative - excepted from fissile classification requirements The package transportation is only carried out Out of scope of the with a valid approval certificate from the 814 to 816 Safety Analysis competent authority as well as an authorisation Report given by each country that is crossed during transport.
Management The management system for the GP-01 package 306 (a) (b) Chapter III system is presented in this chapter.