NRC 2002-0102, Letter from A. J. Cayia Dated 11/15/2002, Point Beach, Unit 1, Thirty-day Response to NRC Bulletins 2001-01, 2002-01 & 2002-02 for Reactor Vessel Head & Vessel Head Penetration Nozzle Inspection Findings
{{Adams | number = ML023290446 | issue date = 11/15/2002 | title = Letter from A. J. Cayia Dated 11/15/2002, Point Beach, Unit 1, Thirty-day Response to NRC Bulletins 2001-01, 2002-01 & 2002-02 for Reactor Vessel Head & Vessel Head Penetration Nozzle Inspection Findings | author name = Cayia A | author affiliation = Nuclear Management Co, LLC | addressee name = | addressee affiliation = NRC/Document Control Desk, NRC/NRR | docket = 05000266 | license number = DPR-024 | contact person = | case reference number = BL-01-001, BL-02-001, BL-02-002, NRC 2002-0102 | document type = Letter type:NRC, Report, Technical | page count = 223 }}
Text
{{#Wiki_filter:Nuclear Management Company, LLC Point Beach Nuclear Plant NMC Committed to NuclearExcellence 6610 Nuclear Road Two Rivers, WI 54241 NRC 2002-0102 10 CFR 50.54(f) November 15, 2002 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555 Docket 50-266 Point Beach Nuclear Plant (PBNP), Unit 1 Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings On August 3, 2001, the Nuclear Regulatory Commission (NRC) transmitted Bulletin (BL) 2001-01, "Circumferential Cracking of Reactor Pressure Vessel Head Penetration Nozzles." On March 18, 2002, the NRC transmitted BL 2002-01, "Reactor Pressure Vessel Head Degradation and Reactor Coolant Pressure Boundary Integrity." On August 9, 2002, the NRC transmitted BL 2002-02, "Reactor Pressure Vessel Head and Vessel Head Penetration Nozzle Inspection Programs." In BL 2001-01 the NRC requested addressees provide within 30 days after plant restart following the next refueling outage; a description of the extent of any vessel head penetration nozzle leakage and cracking detected, including the number, location, size, and nature of each crack detected. Furthermore, if cracking is detected, the report is required to include a description of the inspections, repairs, and other corrective actions taken to satisfy applicable regulatory requirements. In BL 2002-01 the NRC requested addressees provide within 30 days after plant restart following the next inspection of the reactor pressure vessel head; the inspection scope (if different than that provided in response to BL 2002-01, Item 1 .D) and results, including the location, size and nature of any degradation detected. Furthermore, the report is required to include the corrective actions taken and the root cause of the degradation. In BL 2002-02 the NRC requested addresses provide within 30 days after plant restart following the next inspection of the reactor pressure vessel head and vessel head penetration nozzles; the inspection scope and results, including the location, size, extent, and nature of any degradation (e.g., cracking, leakage, and wastage) that was detected. Furthermore, the report is required to include details of the non-destructive examination (NDE) used (i.e., method, number, type, and frequency of transducers or transducer packages, essential variables, equipment, procedure and personnel qualification requirements, including personnel pass/fail criteria), and criteria used to determine whether an indication, "shadow," or "backwall anomaly" is acceptable or rejectable.
NRC 2002-0102 Page 2 On October 16, 2002, Nuclear Management Company, LLC (NMC) completed its most recent refueling outage of Point Beach Nuclear Plant (PBNP) Unit 1. Attached to this letter is a discussion of the inspection scope and results, details of the NDE used, and the acceptability of the limited ultrasonic testing (UT) examinations performed on four of the forty-nine penetrations. Additionally, Westinghouse Electric Company performed a probabilistic analysis to determine whether the inspection results to date on PBNP Unit 1 control rod drive mechanism (CRDM) penetrations provide a risk-informed basis for pursuing a return to power. Proprietary and non-proprietary versions of the probabilistic analysis are provided in Enclosures 1 and 2, respectively. Both reports in Enclosures 1 and 2 are titled, "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations." Enclosed in this letter is a Westinghouse authorization letter, CAW-02-1559 (Enclosure 3), an accompanying affidavit (Enclosure 4), Proprietary Information Notice (Enclosure 5), and Copyright Notice (Enclosure 6). As Enclosure 1 contains information proprietary to Westinghouse Electric Company, it is supported by an affidavit signed by Westinghouse, the owner of the information. The affidavit sets forth the basis on which the information may be withheld from public disclosure by the Commission and addresses with specificity the considerations listed in paragraph (b) (4) of 10 CFR 2.790 of the Commission's' regulations. Accordingly, it is respectfully requested that the information which is proprietary to Westinghouse be withheld from public disclosure in accordance with 10 CFR 2.790 of the Commission's' regulations. Correspondence with respect to the copyright or proprietary aspects of the items listed above or the supporting Westinghouse Affidavit, should reference CAW-02-1559 and should be addressed to H. A. Sepp, Manager of Regulatory and Licensing Engineering, Westinghouse Electric Company, P.O. Box 355, Pittsburgh, Pennsylvania 15230-0355. to this letter contains the nozzle 1 examination results as presented in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This letter contains no new commitments and no revisions to existing commitments. I declare under penalty of perjury that the foregoing is true and accurate. Executed on November 15, 2002. RDS/kmd
NRC 2002-0102 Page 3
Attachment:
PBNP Unit 1 RPV Head and VHP Nozzle Inspection Discussion
Enclosures:
1 - "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations", (Proprietary) 2 - "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations", (Non-Proprietary) 3 - Westinghouse Proprietary Authorization Letter, CAW-02-1559 4 - Westinghouse Affidavit 5 - Westinghouse Proprietary Information Notice 6 - Westinghouse Copyright Notice 7 - "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report" cc (with enclosures): Project Manager, PBNP, USNRC, NRR cc (without enclosures): Regional Administrator, USNRC, Region III NRC Resident Inspector- PBNP
ATTACHMENT To Letter from A. J. Cayia (NMC) to Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01. 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings PBNP Unit 1 RPV Head and VHP Nozzle Inspection Discussion
NRC 2002-0102 Attachment "Page 2 PBNP Unit 1 Inspection Scope and Results Visual Examinations An above-head bare metal visual examination was performed on 100% of the surface area surrounding the PBNP Unit 1 vessel head penetrations (VHP). The examination was performed as described in the revised Nuclear Management Company, LLC (NMC) response to BL 2002-01, Item 1 .D, dated April 18; 2002. The examination resulted in an effective visual examination that revealed no evidence of boric acid deposition or wastage of the reactor pressure vessel (RPV)
'head. All RPV head penetrations were examined with no limitations or masking.
On April 2, 2002 the NMC provided the requested response to NRC BL 2002-01. On April 18, 2002 the NMC provided a revised response to NRC BL 2002-01. In each of these letters the NMC described a small area of apparent wastage on the PBNP Unit 1 RPV-head that occurred in the early 1970's. The description of the affected area on the RPV head was obtained from a first hand. account by an NMC staff member who was involved in repair of the RPV head insulation at the time of discovery. This area was searched for during the above-head bare metal visual examination performed on the PBNP Unit 1 RPV head during the most recent refueling outage. No evidence of the RPV head wastage described above was identified. Ultrasonic Examinations In addition to the above-head bare metal visual examination, ultrasonic examinations (UT) of the nozzle base material were performed. These examinations were performed as described in our response to BL 2002-02, Item 1 .A, dated September 12, 2002. The UT also included a "leak path" examination of each nozzle. All UT and "leak path" examinations revealed no evidence of cracking' or leakage. All nozzles without thermal sleeves (16) were examined using a rotating probe UT technique. The remaining penetrations containing thermal sleeves (33) were examined using a blade probe UT technique. -The initial blade probe UT examination of the nozzle 1 base material revealed several recordable indications.- The nozzle 1 thermal sleeve was removed to initiate repairs'and a 100% rotating UT
-was performed. Multiple transducers from both the axial and circumferential beam directions interrogated these indications during the rotating UT examination. The rotating UT results demonstrated that the indications were embedded flaws resulting from original construction J groove welding processes. These results were confirmed with the performance of two separate'
-liquid penetrant (PT) examinations. The initial UT indications seen were concluded to be a result of manufacturing defects and are not related to primary water stress cracking corrosion (PWSCC). No repairs were performed and the thermal sleeve was reattached. The nozzle 1 examination results are contained in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This report is contained in Enclosure 7. During the performance of the UT examination seven (7) penetrations with thermal sleeves initially had limitations in inspection coverage. In order to provide access to increased examination area, three (3) thermal sleeves were removed and rotating UT examinations were performed. The remaining four (4) nozzles had minor limitations in coverage as shown in Table 1. No shadow or backwall anomaly indications were identified during the performance of these examinations.
NRC 2002-0102 Attachment Page 3 Table 1 Inspection Summary Penetration(s) Coverage Description 1 100% Indications of possible fabrication-related flaw indications found through blade probe UT examination. Thermal sleeve removed to initiate repairs. 100% rotating UT performed with sleeve removed. Indications determined to be weld fabrication-related with the more accurate rotating probe UT. No indications found with confirmatory PT examination. No repairs required. Thermal sleeve reinstalled. 2-25 100% No indications. No restrictions or limitations. 26 78% No indications. Limited coverage justified through engineering analysis. 27 66% No indications. Limited coverage justified through engineering analysis. 28 52% No indications. Limited coverage justified through engineering analysis. 29 100% No indications. No restrictions or limitations. 30 50% No indications. Limited coverage justified through engineering analysis. 31 -33 100% Very limited coverage using blade probe due to physical restrictions. Thermal sleeves removed. 100% coverage obtained through use of rotating UT probe. Nozzle 32 had weld fabrication-related indications only. No flaw indications. Thermal sleeve installed. 34-49 100% No indications. No restrictions or limitations. The individual examination summary charts for nozzles 26, 27, 28 and 30 are located in Figures 1 through 4. The limited coverage on these nozzles was found to be acceptable through performance of engineering evaluations. These evaluations are described later in this document. Circ5 Axia'l Examhination Percentage 'Nozzle.J Area .;'-Length Length '78% 26 Area of Interest 0-3600 0 -6.56" Area Examined 0-2170 0-6.6" Area Not Examined 218-3060 0-6.5" Area Examined 307-3600 0-6.6" 270 d..$ Figure 1 - Nozzle 26 UT Exam Coverage
NRC 2002-0102 Attachment Page 4 Cire Examnina'tion 'Pecetg Nozzle Area, Length Axial Length 660%6 27 Area of Interest 0-3600 0 -6.56" Area Examined 0-1730 0-8.7" Area Not Examined 174-2050 0-6.5" Area Examined 206-2100 0-8.7" Area Not Examined 211-236c 0-6.56" ,o., Area Examined 237-2630 0-8.7" Area Not Examined 264-3320 0-6.56" Area Examined 333-3600 0-8.7" Figure 2 - Nozzle 27 UT Exam Coverage Cire' Axial 7..Examihnati6n Percentage -Nozzle Area Length ~:~Lenith ,. 52%, 28 Area of Interest 0-3600 0 -6.56" Area Examined 0-890 0-8.6" Area Not Examined 90-2610 0-6.56" Area Examined 262-3600 0-8.6" Figure 3 - Nozzle 28 UT Exam Coverage Circ Examiniation Per&entage ,Nozzle. Area "Lgh Aia Length , 50%, 30 Area of Interest 0-3600 0 -6.56" Area Examined 0-890 0-8.6" Area Not Examined 90-1300 0-6.56" Area Examined 131-2390 0-8.6" Area Not Examined 240-3600 0-6.56" 180* Figure 4 - Nozzle 30 UT Exam Coverage
NRC 2002-0102 Attachment Page 5 Liquid Penetrant Examinations As discussed previously, two separate liquid penetrant (PT) examinations were performed on the nozzle 1 J-groove wetted surface to characterize suspected UT indications found during initial blade probe UT examinations. The PT examinations revealed no crack indications. These results were in agreement with no indications found in separate rotating UT examinations following removal of the thermal sleeve. The initial UT indications seen were concluded to be a result of manufacturing defects and are not related to PWSCC. Acceptability of Limited UT Examination of Nozzles 26, 27, 28, and 30 As shown in Table 1, four (4) nozzles (26, 27, 28 and 30) received a UT examination of less than 100% coverage. These limited examinations have been found to be acceptable. This section describes that justification. Flaw Tolerance Evaluation Circumferential cracks located in the nozzle material are the area of prime interest due to the safety concern arising from nozzle ejection and LOCA. Therefore, a flaw tolerance evaluation, postulating a circumferential flaw in the region that was not interrogated by the UT examination was performed by Westinghouse Electric Company. The postulated flaw in this evaluation corresponds to 1800 and is consistent with the limitations documented in Figures 1 through 4. Figure 5 illustrates the time required for a postulated 1800 circumferentially oriented flaw to grow to a point of structural instability (3300) to be approximately 25 years of operation. Figure 5 is plotted as half the length of the circumferential flaw. This accounts for both ends of the flaw to growing equally. The evaluation uses plant specific stresses and operating temperature and the MRP-55 crack growth rate predictions. Based on the UT inspection results and this evaluation, there are no concerns with the structural integrity of the VHPs associated with the possibility of undetected circumferential cracking in the non-inspected areas over at least the next operating cycle. Proprietary and non-proprietary versions of the flaw tolerance evaluation (WCAP-1 4000 and WCAP-1 5950, respectively), were transmitted to the NRC by Westinghouse Electric Company on September 27, 2002.
NRC 2002-0102 Attachment Page 6 180.0o ! I I I 15000
=' 1200 - --
< ~~~CRI M N-1z. J 1 90.0 UI A I 860.0/
F ----
,,lI Service Life > 24
- 30.0,-/
00 0 10 20 30
- 40 50 period (year)
Figure 5 - Crack Growth Predictions for Circumferential Through-Wall Cracks Probabilistic Evaluation In addition to the work described above, Westinghouse Electric Company performed a probabilistic analysis. This work determined, with at least 95% confidence, that the seven penetrations with initial limitations in examination coverage would not produce an axial or circumferential flaw that would exceed the assumed critical sizes over a time interval of up to 14.5 additional effective full power years (EFPYs). This conclusion was based on conservative assumptions in average crack size, stresses influencing crack growth, and inspections performed to date. Proprietary and non-proprietary versions of the probabilistic analysis are provided in Enclosures 1 and 2, respectively. The results of the probabilistic analysis were then evaluated using the plant specific probabilistic risk assessment (PRA) to determine the potential risk significance of this activity. NMC conservatively postulated that a critical failure would lead to a medium loss of coolant accident (LOCA) with an equivalent diameter of more than 2 inches. The corresponding change in core damage frequency for this scenario was calculated to be less than 1E-6/year. These results demonstrate a very small change in plant risk and are consistent with the guidance contained within Regulatory Guide 1.174. 100% Visual and Other UT Examinations The detailed 100% UT examinations of 45 of the 49 CRDM nozzles and of the RPV head vent line, with no evidence of cracking or leakage, give assurance that PWSCC of the PBNP Unit 1 VHPs is not occurring. This is also evident in the results of the 100% visual examination performed on the RPV head exterior surface. These inspections support the evaluations previously discussed and give NMC confidence in the structural integrity of all PBNP Unit 1 VHP nozzles (including nozzles 26, 27, 28, and 30).
NRC 2002-0102 Attachment Page 7 NDE Methods and Qualifications All NDE personnel involved in these examinations and data analysis activities were certified as Level II or Level III NDE inspectors in accordance with their employer's written practices. Personnel certifications were reviewed and approved by the PBNP Level III prior to personnel performing examinations. Visual Examinations The above-head visual examinations (VT) were performed directly by qualified examiners. Additionally, a remote hand-held camera was used to record the examination images onto VCR tape. The procedures used in these VT examinations were qualified in accordance with the employer's written practices, ASME Section XI, and supplemented by'EPRI Report 1006296, Revision 1, 'Visual Examination for Leakage of PWR Reactor Head Penetrations on Top of RPV Head." Ultrasonic Examinations The detailed method of UT examinations performed is contained in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This non-proprietary report describes the number, type and frequency of transducers, essential variables, equipment, and procedures. This report is contained in . A qualification program similar to the ASME Section XI, mandatory Appendix VIII, "Performance Demonstration For Ultrasonic Examination Systems," does not exist for UT testing of the VHP nozzle base material. Framatome ANP was the vendor that performed UT examinations during this most recent PBNP Unit 1 outage. As part of the EPRI MRP, Framatome ANP recently participated in a demonstration of the UT techniques used for detection of axial and circumferentially oriented flaws in the RPV head penetration tube material. These techniques and capabilities were demonstrated in blind testing that was attended by NRC reviewers. Framatome ANP has recently developed the "leak path" UT technique used in the PBNP Unit 1 examinations. It is a proprietary technique that has no formal qualification program. The "leak path" UT technique uses empirical data from the examination of approximately 270 nozzle penetrations. In examinations of VHPs since March 2001 with known bare metal visual leakage where the interference fit has been scanned, a UT "leak path" has been observed. Framatome has presented the "leak path" UT technique to the NRC for review on several occasions. The technical basis of this technique is described in a Framatome ANP proprietary document entitled, "Reactor Vessel Head Penetration Leak Path Qualification Report," dated February 6, 2002. Liquid Penetrant Examinations All personnel and procedures involved in the PT examinations were qualified in accordance with ASME Sections V and XI. The first PT was performed to the Framatome ANP procedure 54-ISI-244-06, "Liquid Penetrant Examination of Reactor Vessel Head Penetration from the Inside Surface." The second PT was performed to PBNP procedure NDE-451, "Liquid Penetrant Examination Temperature Applications 45 OF to 125 OF."
ENCLOSURE 2 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations" (Non-Proprietary)
Westinghouse Non-Proprietary Class 3 Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations
In its Fall outage of 2002, Point Beach Unit 1 Nuclear Power Plant attempted to inspect all 49 of its control rod drive mechanism (CRDM) penetrations but could not provide 100% inspection coverage of 7 of the penetrations. The purpose of the work documented in this letter report is to provide a probabilistic analysis to determine whether the inspection results to date on Point Beach Unit 1 CRDM penetrations can provide a risk-informed basis for pursuing a contemplated return to power, with inspections of the 7 partially examined penetrations at a future outage. Summary of Approach: The approach is to first establish the maximum number of axial and circumferential flaws that may be left in the base metal of the tubing for the 7 partially-inspected Unit 1 CRDM penetrations with 95% confidence that no one flaw will exceed the pertinent critical flaw size during the desired time interval. This calculation uses a probabilistic model derived from extreme value theory, with values for inputs (critical sizes and crack growth rates) taken from a recently-completed structural reliability study for Point Beach units 1 and 2 (WCAP14000). The maximum allowable number is then compared with the upper 95% confidence value on flaws projected to currently be in Unit l's set of CRDM penetrations based on a simple statistical evaluation of sample inspections to date. If the maximum allowable flaw number exceeds the upper confidence limit number, then it can be claimed with at least 95% confidence that the plant can return to power and operate for the contemplated interval without a flaw in the subject unit's CRDM penetrations progressing to its critical size. Summary of Results: Using this approach, the analysis concludes, with at least 95% confidence, that the 7 incompletely inspected penetrations of interest will not produce an axial or circ flaw that will exceed the assumed critical sizes over a time interval of up to 14.5 additional effective full power years (EFPY). This conclusion is based on conservative assumptions as to average crack size, to stresses influencing crack growth, and to inspections performed to date. Specifically, the distribution of flaws remaining in the 7 penetrations is assumed to have a mean depth of "through wall" with a length of 3 inches. Cracks grow at a rate consistent with the most stressed (outer layer) of the CRDM penetrations. No credit is taken for partial inspections. It should be noted, however, that no welds were inspected and no inferences are made here about weld integrity. Descriotion of the Work Performed (a, c)
Results Equation (2) is used to calculate the probability of the ith flaw in each sub-lot reaching full critical length (Table 2) within operating intervals ranging from 1 to 15 effective full power years for axial
and circ flaws. Equation (5) uses the probabilities in Table 2 and the target reliabilities of 95% to calculate the allowable number of flaws in the 7 penetrations for operating intervals out to 15 additional ("Target") EFPY shown in Table 3. Comparing Table 3 to the upper confidence number of 1 calculated above, the circ cracks limit the number of additional EFPY that Point Beach Unit 1 can go without inspecting the 7 subject penetrations to 14.5 EFPY. That is, at 14.5 additional EFPY the number of allowable leaks just matches the number of circ flaws that we are 95% confident will not be exceeded. We can thus say with at least 95% confidence that the 7 partially inspected penetrations will not generate a critical axial or circ flaw over a future ranging up to 14.5 EFPY. Table 2" Probability ith Flaw > Critical Length Before Target EFPY Target EFPY Axial Circ 1 1.16E-04 1.80E-03 1.5 1.78E-04 2.76E-03 2 2.43E-04 3.76E-03 2.5 3.1OE-04 4.80E-03 3 3.81 E-04 5.88E-03 3.5 4.55E-04 7.01E-03 4 5.32E-04 8.18E-03 4.5 6.12E-04 9.41E-03 5 6.96E-04 1.07E-02 5.5 7.84E-04 1.20E-02 6 8.76E-04 1.34E-02 6.5 9.71E-04 1.48E-02 7 1.07E-03 1.63E-02 7.5 1.18E-03 1.79E-02 8 1.28E-03 1.95E-02 8.5 1.40E-03 2.12E-02 9 1.52E-03 2.29E-02 95 1.64E-03 2.48E-02 10 1.77E-03 2.67E-02 10.5 1.91E-03 2.87E-02 11 2.05E-03 3.07E-02 11.5 2.20E-03 3.29E-02 12 2.35E-03 3.51E-02 12.5 2.51E-03 3.75E-02 13 2.68E-03 3.99E-02 13.5 2.86E-03 4.25E-02 14 3.04E-03 4.51E-02 14.5 3.24E-03 4.78E-02 15 3.44E-03 5.07E-02
Table 3. Allowable Number of Flaws @ 100% Criticsel Size 17 Tuibes* Target EFPY Axial Circ 1 7.0 7.0 1.5 7.0 7.0 2 7.0 7.0 2.5 7.0 7.0 3 7.0 7.0 3.5 7.0 7.0 4 7.0 6.2 4.5 7.0 5.4 5 7.0 4.8 5.5 7.0 4.2 6 7.0 38 6.5 7.0 3.4 7 7.0 3.1 7.5 7.0 2.8 8 7.0 2.6 8.5 7.0 2.4 9 7.0 2.2 9.5 7.0 2.0 10 7.0 1.9 10.5 7.0 1.8 11 7.0 1.6 11.5 7.0 1.5 12 7.0 1.4 12.5 7.0 1.3 13 7.0 1.3 13.5 7.0 1.2 14 7.0 1.1 14.5 7.0 1.0 15 7.0 1.0 Addendum on Use of Table 2 in a Reaulatorv Guide 11 174 Analysis Addendum on Use of Table 2 in a Reoulatorv Guide 174 Analvqis Regulatory Guide 1.174 suggests that a contribution to plant risk is "small" if (1) the contribution to plant CDF is no more than IE-6, and (2) the contribution to plant LERF risk is no more than lE-7. The probabilities in Table 2 cannot be used in to support a Regulatory Guide 1.174 risk analysis without first accounting for the likelihood of the ith tube having a leak now. Using only the sample information from Point Beach Unit l's latest inspection and, in Bayesian terms, assuming a "prior" uniform distribution between 0 and 1 on the probability that any one penetration would have a leak, it can be shown that the mean or expected value of the subject probability (now treated as a random variable) is (Martz and Waller, page 257),
(6) p= x+1 n1+2 where x = the number of leaks found in the inspections and n = the number of penetrations inspected. Using the same value (43) as before and setting x equal to zero, the estimated value for the probability that a given penetration would have a leak is 1/(43+2) = 0.022. If the latter is taken as the probability that a penetration will have a through wall circ leak of average size assumed in calculating Table 2 (i.e., 3 inches), then the unconditional probability that the ith penetration will have a critical circ leak by, say, 1.5 Target EFPY is 0.022*2.76E-3 = 6.14E-5, (where the 2.76E-3 comes from Table 2). One further note. The Regulatory Guide 1.174 criteria are expressed in terms of frequency of event per reactor year. The probability of the ith penetration leaking over multiple years must therefore be converted to an equivalent per year basis. References Bain, L. J., Statistical Analysis of Reliability and Life Testing Models, Marcel Dekker, Inc., 1978. Bamford, W. H., and D. Tang, "Structural Integrity Evaluation of Reactor Vessel Upper Head Penetration to Support Continued Operation: Point Beach Units 1 and 2," Westinghouse Proprietary document (WCAP-14000), Revision 1, September 2002. Cunningham, M. A., "Statistical Analysis of CRDM Sampling (Revision)", memo of August 17, 2001 to W. H. Bateman, Office of Nuclear Reactor Regulation, Nuclear Regulatory Commission. Kapur, K. C., and L. R. Lamberson, Reliability in Engineering Design, John Wiley and Sons, 1977. Martz, H. F., and R. A. Waller, Bayesian Reliability Analysis, Krieger Publishing Co., 1991. Tomes, C. A., "Probability of Not Detecting a Flaw in Unexamined Penetrations," email to Warren Bamford, September 30, 2002. U.S. Nuclear Regulatory Commission Regulatory Guide 1.174, "An Approach to Using PRA in Risk-Informed Decisions on Plant-Specific Changes to the Licensing Basis," July 1998.
ENCLOSURE 3 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Proprietary Authorization Letter, CAW-02-1559
Westinghouse Westinghouse Electric Company Nuclear Services P.O Box 355 Pittsburgh, Pennsylvania 15230-0355 USA U.S. Nuclear Regulatory Commission Directtel: (412) 374-5282 Document Control Desk Direct fax: (412) 374-4011 Washington, DC 20555-0001 e-mail: Sepplha@westinghouse.com Attention: Mr. G. Shukla Our ref: CAW-02-1559 October 11, 2002 APPLICATION FOR WITHHOLDING PROPRIETARY INFORMATION FROM PUBLIC DISCLOSURE
Subject:
Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations (Final - Proprietary Version);
Dear Mr. Shukla:
The proprietary information for which withholding is being requested in the above-referenced report is further identified in Affidavit CAW-02-1559 signed by the owner of the proprietary information, Westinghouse Electric Company LLC. The affidavit, which accompanies this letter, sets forth the basis on which the information may be withheld from public disclosure by the Commission and addresses with specificity the considerations listed in paragraph (b)(4) of 10 CFR Section 2.790 of the Commission's regulations. Accordingly, this letter authorizes the utilization of the accompanying Affidavit by Nuclear Management Company. Correspondence with respect to the proprietary aspects of the application for withholding or the Westinghouse affidavit should reference this letter, CAW-02-1559 and should be addressed to the undersigned. Very truly yours, H. A. Sepp, M nager Regulatory and Licensing Engineering Enclosures Cc: G. Shukla/NRR A BNFL Group company
ENCLOSURE 4 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Affidavit
CAW-02-1559 AFFIDAVIT COMMONWEALTH OF PENNSYLVANIA: ss COUNTY OF ALLEGHENY: Before me, the undersigned authority, personally appeared H. A. Sepp, who, being by me duly sworn according to law, deposes and says that he is authorized to execute this Affidavit on behalf of Westinghouse Electric Company LLC ("Westinghouse"), and that the averments of fact set forth in this Affidavit are true and correct to the best of his knowledge, information, and belief:
'a1 H. A. Sepp, Manager ........ Regulatory and Licensing Engineering 1'; ,git" Sworn to and subscribed before me this /1'.* day of ef ? ,2002 Notary Public Nota Sea]
Margaret L Gonano, Notary Pubric Monhvevile Boro, .Aeghe**y County My Comiso Exprem Jan. 3,2006 Member. Pennelivania Assodabn Of Notarfte
2 CAW-02-1559 (1) 1 am Manager, Regulat6ry and Licensing Engineering, in Nucleai- Services, Westinghouse Electric Company LLC ("Westinghouse"), and as such, I have been specifically delegated the function of reviewing the proprietary information sought to be withheld from public disclosure in connection with nuclear power plant licensing and rule making proceedings, and am authorized to apply for its withholding on behalf of the Westinghouse Electric Company LLC. (2) I am making this Affidavit in conformance with the provisions of 10CFR Section 2.790 of the Commission's regulations and in conjunction with the Westinghouse application for withholding accompanying this Affidavit. (3) I have personal knowledge of the criteria and procedures utilized by the Westinghouse Electric Company LLC in designating information as a trade secret, privileged or as confidential commercial or financial information. (4) Pursuant to the provisions of paragraph (b)(4) of Section 2.790 of the Commission's regulations, the following is furnished for consideration by the Commission in determining whether the information sought to be withheld from public disclosure should be withheld. (i) The information sought to be withheld from public disclosure is owned and has been held in confidence by Westinghouse. (ii) The information is of a type customarily held in confidence by Westinghouse and not customarily disclosed to the public. Westinghouse has a rational basis for determining the types of information customarily held in confidence by it and, in that connection, utilizes a system to determine when and whether to hold certain types of information in confidence. The application of that system and the substance of that system constitutes Westinghouse policy and provides the rational basis required. Under that system, information is held in confidence if it falls in one or more of several types, the release of which might result in the loss of an existing or potential competitive advantage, as follows: (a) The information reveals the distinguishing aspects of a process (or component, structure, tool, method, etc.) where prevention of its use by any of
3 CAW-02-1559 Westinghouse's competitors without license from Westinghouse constitutes a competitive economic advantage over other companies. (b) It consists of supporting data, including test data, relative to a process (or component, structure, tool, method, etc.), the application of which data secures a competitive economic advantage, e.g., by optimization or improved marketability. (c) Its use by a competitor would reduce his expenditure of resources or improve his competitive position in the design, manufacture, shipment, installation, assurance of quality, or licensing a similar product. (d) It reveals cost or price information, production capacities, budget levels, or commercial strategies of Westinghouse, its customers or suppliers. (e) It reveals aspects of past, present, or future Westinghouse or customer funded development plans and programs of potential commercial value to Westinghouse. (f) It contains patentable ideas, for which patent protection may be desirable. There are sound policy reasons behind the Westinghouse system which include the following: (a) The use of such information by Westinghouse gives Westinghouse a competitive advantage over its competitors. It is, therefore, withheld from disclosure to protect the Westinghouse competitive position. (b) It is information that is marketable in many ways. The extent to which such information is available to competitors diminishes the Westinghouse ability to sell products and services involving the use of the information. (c) Use by our competitor would put Westinghouse at a competitive disadvantage by reducing his expenditure of resources at our expense.
4 CAW-02-1559 (d) Each component of proprietary information pertinent to a particular competitive advantage is potentially as valuable as the total competitive advantage. If competitors acquire components of proprietary information, any one component may be the key to the entire puzzle, thereby depriving Westinghouse of a competitive advantage. (e) Unrestricted disclosure would jeopardize the position of prominence of Westinghouse in the world market, and thereby give a market advantage to the competition of those countries. (f) The Westinghouse capacity to invest corporate assets in research and development depends upon the success in obtaining and maintaining a competitive advantage. (iii) The information is being transmitted to the Commission in confidence and, under the provisions of 10CFR Section 2.790, it is to be received in confidence by the Commission. (iv) The information sought to be protected is not available in public sources or available information has not been previously employed in the same original manner or method to the best of our knowledge and belief. (v) The proprietary information sought to be withheld in this submittal is that which is appropriately marked in the report, "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations," (Proprietary), being transmitted by the Nuclear Management Company letter and Application for Withholding Proprietary Information from Public Disclosure, to the Document Control Desk, Attention Mr. G. Shukla. The proprietary information as submitted for use by Westinghouse Electric Company LLC for Point Beach Unit 1 is expected to be applicable for other licensee submittals in response to certain NRC requirements for justification of continued safe operation of Point Beach Unit 1. This information is part of that which will enable Westinghouse to: (a) Assess the risk with unexamined CRDM penetrations.
5 CAW-02-1559 (b) Assist the customer in obtaining NRC approval. Further this information has substantial commercial value as follows: (a) Westinghouse plans to sell the use of similar information to its customers for purposes of meeting NRC requirements for licensing documentation. (b) Westinghouse can sell support and defense of continued safe operation with the presence of cracks in a control rod drive head penetration. (c) The information requested to be withheld reveals the distinguishing aspects of a methodology which was developed by Westinghouse. Public disclosure of this proprietary information is likely to cause substantial harm to the competitive position of Westinghouse because it would enhance the ability of competitors to provide similar support documentation and licensing defense services for commercial power reactors without commensurate expenses. Also, public disclosure of the information would enable others to use the information to meet NRC requirements for licensing documentation without purchasing the right to use the information. The development of the technology described in part by the information is the result of applying the results of many years of experience in an intensive Westinghouse effort and the expenditure of a considerable sum of money. In order for competitors of Westinghouse to duplicate this information, similar technical programs would have to be performed and a significant manpower effort, having the requisite talent and experience, would have to be expended. Further the deponent sayeth not.
ENCLOSURE 5 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Proprietary Information Notice
, C CAW-02-1559 PROPRIETARY INFORMATION NOTICE Transmitted herewith are proprietary and/or non-proprietary versions of documents furnished to the NRC in connection with requests for generic and/or plant-specific review and approval. In order to conform to the requirements of 10 CFR 2.790 of the Commission's regulations concerning the protection of proprietary information so submitted to the NRC, the information which is proprietary in the proprietary versions is contained within brackets, and where the proprietary information has been deleted in the non-proprietary versions, only the brackets remain (the information that was contained within the brackets in the proprietary versions having been deleted). The justification for claiming the information so designated as proprietary is indicated in both versions by means of lower case letters (a) through (f) located as a superscript immediately following the brackets enclosing each item of information being identified as proprietary or in the margin opposite such information. These lower case letters refer to the types of information Westinghouse customarily holds in confidence identified in Sections (4)(ii)(a) through (4)(ii)(f) of the affidavit accompanying this transmittal pursuant to 10 CFR 2.790(b)(1).
ENCLOSURE 6 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findin-qs Westinghouse Copyright Notice
CAW-02-1559 COPYRIGHT NOTICE The reports transmitted herewith each bear a Westinghouse copyright notice. The NRC is permitted to make the number of copies of the information contained in these reports which are necessary for its internal use in connection with generic and plant-specific reviews and approvals as well as the issuance, denial, amendment, transfer, renewal, modification, suspension, revocation, or violation of a license, permit, order, or regulation subject to the requirements of 10 CFR 2.790 regarding restrictions on public disclosure to the extent such information has been identified as proprietary by Westinghouse, copyright protection notwithstanding. With respect to the non-proprietary versions of these reports, the NRC is permitted to make the number of copies beyond those necessary for its internal use which are necessary in order to have one copy available for public viewing in the appropriate docket files in the public document room in Washington, DC and in local public document rooms as may be required by NRC regulations if the number of copies submitted is insufficient for this purpose. Copies made by the NRC must include the copyright notice in all instances and the proprietary notice if the original was identified as proprietary.
ENCLOSURE 7 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report"
A FRAMATOME ANP 0 Point Beach Aý 7-I ftubqw October 5, 2002 Revision 0 Prepared by: Date: 10/5/02 M. W. Key, UT-Level IIISC
A FRAMATOME ANP Record of Revision Revision 0 Initial issue 2
A FRAMATOME ANP EXAMINATION
SUMMARY
Automated ultrasonic examinations of 49 CRDM nozzles and vent line nozzle were performed on the Point Beach Unit 1 Reactor Vessel Head. The examinations were conducted from beneath the head using the SUMO Rocky manipulator, USA Blade Tool, and Bottom Up Rotating Tool. Framatome ANP examination procedure 54-ISI 100-09, "Remote Ultrasonic Examination 'of Reactor Head Penetrations" was used to perform the examination that governs the remote automated contact ultrasonic examination of CRDM nozzles using the ACCUSONEXTM automated data acquisition and analysis system. The techniques utilized for this examination are intended for the detection and through wall (depth) sizing of axial and circumferential IDand OD initiating flaws greater than
.079" (2 mm) in the nozzle base metal only. In addition, leak path techniques were employed for the detection of fluid flow on the nozzle OD surface above the J-groove weld. Forward scatter (TOFD) longitudinal-wave and backward scatter shear wave techniques are used. The examinations were conducted from the bore of the CRDM nozzles from the bottom end of the nozzle up to a point nominally 2" above the uphill side of the nozzle J-groove weld.
The inspections consisted of scanning for axial and circumferential flaws within the nozzle. The bottom up tooling consisted of a transducer head that holds 10 individual search units. These search units were divided into two sets, one for the axial beam direction and one for the circumferential beam direction. The axial beam direction set of search units consisted of 5.0 MHz, longitudinal wave forward scatter time of flight search units with angles of 300 and 450; backward scatter pulse echo, 2.25 MHz 600 shear wave search units; and a 5.0 MHz 00 search unit. The circumferential beam direction set of search units consisted of 5.0 MHz, longitudinal wave forward scatter time of flight search units with angles of 450, 550, and 650; backward scatter pulse echo, 2.25 MHz 600 shear wave search units; and a 5.0 MHz 00 search unit. Appendix A contains printouts for system setup, calibrations files and scan parameters. The USA Blade tooling consisted of a single Circ-blade probe designed to emit ultrasound along the long axis of the nozzle. The 'axial beam search unit consisted of 5.0Mhz, longitudinal wave forward scatter time of flight search unit with an inspection angle of 500. The detection of flaw indications is based upon the expected responses for each search unit and technique. The 00 transducer provides weld position information due to lack of backwall response in the region of the flaw. The forward scatter time of flight techniques provides flaw detection and sizing information. For the forward scatter transducers, flaw detection is identified by loss of signal response either from the lateral wave or backwall responses as well as detection of crack tip diffracted responses. The 600 shear wave transducer provides detection by means of corner trap responses between the flaw and nozzle surface and sizing with tip diffracted signals. 3
A FRAMATOME ANP The bottom-up tool was positioned with the "Z" axis (axial) zeroed at the bottom of the nozzle with the positive direction extending up into the nozzle. The 'Theta" (rotational) axis was zeroed at the downhill side of the nozzle J-groove weld with. the positive direction in the counter-clockwise direction while looking up from the bottom of the nozzle (Nozzle 1 was zeroed at vessel "W" axis which is inline with the vent line nozzle). The ultrasonic data is adjusted for individual transducer offsets in the transducer head to provide actual reflector location in the nozzle. Of the 49 nozzles examined, one nozzle (1) contained a recordable fabrication indication in the nozzle wall. In most nozzles, these indications were located predominately on the downside of the weld and identified by multiple transducers from both axial and circumferential beam directions. These indications were characterized as embedded volumetric fabrication flaws resulting from the J-groove welding process. See Fiqure 1 for reporting criteria for fusion zone indications. The examination of the remaining 48 nozzles and vent line did not reveal any recordable indications. However, it was noted on the examination data sheets that fabrication type flaws were detected at the nozzle/J-groove weld fusion zone with no penetration into the nozzle. All nozzles with the exception of #26, #27, #28 and #30 received 100% coverage for the areas requiring examination as defined by the governing procedure (54-ISI-100-9). The nozzles with limited scan coverage are as follows: Circ .. Axial :ExaminationPercentage Nozzl A rea Leth Lrt7.478 26 Area of Interest 0-3600 0 -6.56" Area Examined 0-2170 0-6.6" Area Not Examined 218-3060 0-6.5" Area Examined 307-3600 0-6.6" / 4
A FRAMATOME ANP @6
.,..-'>Circ "Exkamination6Percentagez Nozzle ."Area' 'Length. 'AkiiaLength___________
0,0 27 Area of Interest 0-3600 0 -6.56" Area Examined 0-1730 0-8.7" Area Not Examined 174-2050 0-6.5" Area Examined 206-2100 0-8.7" Area Not Examined 211-236° 0-6.56", Area Examined 237-263' 0-8.7" Area Not Examined 264-332o 0-6.56" Area Examined 333-3600 0-8.7"
-~ ~~: .Cic,: Aklal; 'Examination,Percentae
'Nozzle ;ýAiea, <Leth -Lengthr -52%0 28 Area of Interest 0-3600 0 -6.56" Area Examined 0-89* 0-8.6" Area Not Examined 90-2610 0-6.56" Area Examined 262-3600 0-8.6" 2' go "gT..
Examination Percentage Na Axial Length' 50 30 Area of Interest 0-360° 0 -6.56" °,., Area Examined 0-890 0-8.6" Area Not Examined 90-1300 0-6.56" Area Examined 131-2390 0-8.6" 2"tO O.W. Area Not Examined 240-3600 0-6.56" 5
A FRAMATOM E ANP SYSTEM CALIBRATION The ultrasonic system consists of the essential equipment required to perform the examinations. The equipment for the CRDM examinations is made up of ultrasonic equipment that must be calibrated in order to provide a 'time base and amplitude response traceable to a known reference standard. The system consists of the R/D Tech pTomo, remote pulser, transducers, interconnecting cables, and the acquisition and analysis software. i Prior to the examinations, the system is calibrated using the appropriate equipment. The equipment considered as essential variables used for each examination is documented on the examination data sheet. The calibrations are established by entering transducer/application specific parameters into the acquisition program calibration setup. A dynamic scan of the calibration block is performed with the pre-established parameters. The data analyst evaluates the data from the calibration block and makes the necessary adjustments in the acquisition calibration setup to provide an accurate system calibration. Once the adjustments are made, an additional scan of the calibration block is performed, which becomes the system initial calibration. The procedure requires intermediate calibration checks to be performed periodically throughout the examinations. At the discretion of the analyst, the intervals between the calibration checks may be extended based upon continued satisfactory performance of the system. This is verified by observing the characteristics of the transducers during the examinations. The lateral wave of the TOFD transducers, the backwall responses for either the shear or longitudinal wave components of the transducers, and the signal to noise levels are used to make this evaluation. During the course of the examinations of the Midland Replacement Head CRDM nozzles, which spanned a 13-day period, the performance of each transducer was monitored during acquisition and verified by the analyst following completion of scanning of each nozzle. No system degradation was observed during the examination period, thus intermediate calibration checks were not performed. The requirement is more for security in reducing the amount of lost data if the system calibration is compromised, rather than a technical basis. A dynamic scan of the calibration block serves as the final calibration at the end of the series of examinations. The data file identification provides a date and time stamp identifying when each data acquisition is started. This time is used for tracking of the calibrations and examinations. The file designation is broken down into the following: F2179_07.52.33 Hour, minute, second Day of the year, in this case the 179th day (06/28) Year 2002 6
A FRAMATOME ANP Reporting Criteria for Fusion Zone Indications Closure Head 0.060" Nom. Weld Dilution Zone "IJ-grooveWeld CRDM Nozzle Indications detected within 0.060" of the tube OD in the weld region are reported as weld fabrication flaws in the weld. Indications greater than 0.060" from the tube OD in the region of the weld are considered recordable conditions and are reported separately on the data sheets. Those indications that are observed at depths greater than 0.060" from the tube OD are characterized as embedded volumetric weld fabrication flaws resulting from excessive localized dilution into the tube wall where slag was entrapped. Figure 1 7
A F RAMATOME ANP APPENDIX A SYSTEM SETUP. CALIBRATION RECORDS. SCAN PARAMETERS Circ Blade ProbeRecords: 8
A FRAMATOME ANP Circ Blade Probe (continued): 9
A FRAMATOME ANP I . Rotating Probe Records (ChI to 6): 10
A FRAMATOME ANP Rotating Probe (Chl to 6) (continued): 11
A FRAMATOME ANP Rotating Probe (ChI to 6) (continued): 12
A FRAMATOME ANP I Rotating Probe (ChI to 6) (continued): 13
A FRAMATOME ANP I f Rotating Probe Records (Chl to 4): 14
A FRAMATOME ANP I Rotating Probe (Chl to 4) (continued): 15
A FRAMATOME ANP Rotating Probe (Chl to 4) (continued): 4 Channel 3 not used 16
A FRAMATOMEANP Vent Line Probe Records (Chl to 5): 17
A I FRAMATOME ANP I . Vent Line Probe (Chl to 5) (continued): 18
A FRAMATOME ANP Vent Line Probe (Chl to 5) (continued): 19
L404 Q)Ii~4 ~ tI I ii-i
-e
'k, Status Summary of PBNP Unit I RV He "RDM
--,4 --
Inspections li9... _ ,_a.. -l 'O ,,. I- " .1 Zt-Pen Visual Examination PT Examination UT Examination Leak Path Source of Leak
# - - Examination 26 , iJ I Sus Lim Report NA I Report NI I- 2i Li e;'.I*Report
, _____ * ' NI II- AA0""' Lim " Report "°" NA Identified Report 27 N I . _,_ - t Al'qz c 0T (' __._.,_"_"_
29 ___ - ._.-_ / y 30 -_
' ~
~1~ , _
~ __
4 17--_ 12.4-- fr* -4' _ _ _ 31 33 32-- , A -l-14q _ -~-_ A _ _ _ 34 - -c--
-* -T,, A 't S 35 ____ ___ /t e7 It0")
6 pe 36 37 1 - - _.,, ..0..,o
. i/...4ti 38 -v!
*, I, Y_"__-
39 ii - 17
":1.127F, 40_
41 ,
"Z-LVr,1 -_
a~v2U7 42 - -- - - - ( _ 43 I 44 JA 9k ,_
" *- 'a*r P_ .- - *
'Af, ua..
4 46 47 - - I 16 A0.0' ."7. 48 - -ae1 b/, 7;,.1-. "_ VL 49 - - -I - -% I z I_ ifZ4C...- & ?o6, 191,, . c
, 11 __ _ _ _ _ _
DI T~L :-IIdI i U ra ao eAN rpos ilt ak_ 101 1)llt~L UlIoxe; Pramatome ANt' responsibility C- 110. Ck- I kc Ak * ?oTA-nP& P9o6i5 L ,C A;* ;r*-1 t, R e,-X M A -
PBNP Unit 1 RV Head CRDM Flaw Evaluation Data Pen Orientation of Flaw Location of Flaw Vertical Circ Location gf Pen Actual Flaw Sizing Source Ind ID 0 Location of Flaw Flaw Row Thick- Figure axial I circ bot ID OD_ Sub W BW WA Uphill Downhill ness A/L Depth Length Liga I I h I ratio ment A B C D E F G H I J K L M _ I I1 REFER TO Framatome ANP SPREADSHEET\,FOR DATA LOCATIONS ITEMS F, L, AND M ARE NtiriO; DATA ENTRY LOCATIONS
A FRAMATeMIA AtjIF CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: A Procedure: 54-1S1-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): End of Noz. (in.): Probe Serial No.'s: Ch i Ch 6 n/a A*I'. ati'. t6-- Ch2 n/a Ch7 - n/a 451, / , f' 3' Ch 3 f/a Ch 8 n/a Circ. Scan Start: jdeg @L J" Stop: [ Jdeg @L " Stop: Ch4 n/a Ch9 n/a Flies: Cal Block SIN: Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 C D E D E -_- - I H B _ 2
-3 -4 -5 -6 7
8 9
'10 11 12 13 14 15 16 17 Data Loc, 0 30 60 90 120 150 ISO 210 240 "270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 1240 270 300 330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. IInches MIN. Inches Comments: Measured Thickness:l G (*theta of degl with an axial position of Limited Scan? (IYN):I Analyzed by: Date: Analyzed by: Date:
9/21/0212:29 PM Data Sheet - Blade Page I of 2
A PRAMATOMC ANP Nozzle Profile DEK 15.0 I I I I I 14.5 ------ - - 4 lt
-. 7 14.0 -------- -- -------- ------------------- -7 ,
- 13. -~,;
-- --- ---------- ---------------- 44 4 13.0 ------------------ ------------------ ------------------
12.5 4----*4-4---4-4
- ----------------- 4
. 4..
4.444 j... ....... 44%-- Uphill
- , 11 '- I I -I 12.0 .4 44- -- -- -- ---------------- ------------------ Side 11.5 ------------------ ------------------ ------------------
4Z--- -4 - 444 . .4- - - - 11.0 ------------------ ------------------ ------------------ - --- 4---- - 4- .- -- - - - 4 -- - 10.5 ------------------ ------------------ ------------------ 4 4 -- 44--- -- 4 10.0 ------------------- ------------------ ---------- ------
--- -- 44---
-- -j ------ -
9.5 ------------------ ------------------ ---------- ...... 9.0 ------------------ ------------------ ------------------ 8.5 ------------------- ------------------ ------------------ In 0 8.0 ------------------ ------------------ ------------------ 7.5 ------------------ ------------------ ------------------ 7.0 ------------------ ------------------ ------------------ 6.5 4. 5 . . ... ------------------- ------------------- ------------------ 6.0 -- - - --- - - - ---
------------------- ------------------- ------------------ 44 4 .. 4 4 5.5 ------------------- ------------------ ------------------
5.0 *------------ ------------------- ------------------ ------------------ - - 4--- - - 4. *47 4' 4---.--- 4.5 -- - -- 4-r 4
-44 p 4
- - '4 444J' 4--.
'--j-j-4 4.0 j--
3.5 -- I 3.0 --vt' -- --- 4 ------------------- ------------------ ------------------ 4.444 44 44, --- 4 t.-- - -- - -- - Downhill 2.5 ----------------- ------------------ ------------------ ----
---- --- 7".,-
2.0 ---------- ------------------- ------------------ Side 1.5 ---- --- --- ------------- 1.0 ----------- 0.5 7 7 7, 0.0 . -... .- I, . m-. I-mm 4kkimlm . . 0 50 100 150 200 250 300 350 Degrees I -2 3 -4
-5 -6 -7 .8
-9 -10 11 -12
-13 ------- 14 15 -- 16 inNoz. End -11 "um-v Uphill / Downhill demarcation 12:40 PM9121/02 Data Sheet - Blade Chart 1 Page 2 of 2 1%
FRAMATOCME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 I / ' PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 r 1Reactor Head Penetration
;:RA,&MAZ0MZ .AAM Ultrasonic Examination D.ata Sheet Customer: NMC L[Plant: 8b1' B,,, l Unit:
Penetration No.: / ' Procedure: ' Equipment: Description VH# Cal. Due Date SN# gTomoscan 2z-/ 7o -n 16 Channel PiR I/N ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3-5 9 Cable Len th: 5o0 Type: iRL- I- # Intermediate Connectors: I Calibration Block: & p1//1q3v, Calibration Setup: A21'7 3
,if-7 ? 4 -
A. q qu. I, 51.
-Scan File No.: Initial Calibration File: A 4Z.
A z /L/ 5Y. 5-%I Final Calibration File: 42Z*3JL' ,,".qt Scan Start: Z = -3.t, "Scan Start: 0 =- Scan Stop: Z = /t--.//`Scan Stop: 0 ='" Index Increment: 30 Channel An le Serial No. Comments
/ 6' . 3 oq0W Z 3-3 .. 5zoZ -roF D 3 &oI0 35c0lo 4I"L,5'f I -- O,¢z
&,Cr36 1 S15& i¶'
& 0*6 36052-.
7WQ? 35101 1-D~
"` ( z) . o-S" "5"+0 Results: No Recordable Indication*s Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: / / ,Date: Reviewed by: Level: Date: -z TYPICAL DATA SHEET FIGURE 5 ;, roIAvl/ Page 31 of 32
0 A CROM NozzlA
.. - *. 1Iltrnnir
.... FY2min2finn 4**U fl2f2 4LL4 haaf 55h Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 " Nozzle: -I Procedure: 54-ISi-100-09 INozzle Dimensions: (is.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch 1 35044 Ch 6 35052
- i-'t ?A; e ,-Stb p: 01,, , ,..'S~ tui:I ." Ch2 35202 Ch7 35202 4$-,* *,Ch 3 35070 Ch8 35070 Circ. Scan Start:L[ sJdeg @1 -3.6 " stop:I 365 Ideg @1 1641j' Setup: 1* Ch4 35044 Ch9 not active Files: A2273_14.54.39 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 35048 Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI -
2 3 4
-6 7
9 10 11 12 13 14 15 18 17
-w Data Loc. 0 30 60 90 120 150 180 210 240 270 1300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 1.50 180 1 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 _ 0.00 0.00 ...0.00 0.00 0.00
_ _ 0.00 Inches MAX. 2 87 2.71 2.78 2.75 2.82 2.83 2.80 2.79 2.81 2.82 2.74 2.80 2 80 Inches MIN. 1.66 1.59 1.57 1.57 1.57 1.58 1.55 1.3 1.58 1 61 1.62 1.64 1.59 Inches Comments: Measured Thickness:, 0,625 @theta of 2*0'31 dogewith an axial position of 1.041 Limited Scan? (YIN): n '6 degjree data position aligns with 0 or W axis &Venthine Analyzed by: ,,, Date: /*;O ...... Analyzed by: "/,q/ Date: "/*,I 10/31021:04 PM Nozz 1 rotating 10131021:04~~~~~h PMNz ZoaigPg Page I of 2 f
N7 ZJ1 Z ? 6 ed I. 1IMtD 6ulleloi I- flO' ZOICIOLýV'Jd 6Z:Lý 4 Nq vi-R
~'~,t" 3~a:!a-~
3'-4a- g". i"- .9991 ea~ai13~ 3 ' aaa~~a~~a~a4. 4 ~~~ aa K O~iO aa ~.t'aa a't ~33' a-3- a#a3aa3aaaaa; ~ "'~ p
.Va~-
O 3 aaa~a?
-:4~09 me i I (a .3, a) Aaa- a-s a a 3'a a - a aa- 4 'a a-' a3' a a-3
-a a- ------ ---
,' aaa-a'A 3
3 3' ' t'- ia3/4g.3aa a3¶aa-;4j'aa ada-' ta a a. 4-jaka - a- ca--"
-' r 'C -' a-a a3a'Z7' a a<a apaaa., afaa Yaaaa a a
,4rSaba a a a-a a-3'a,.3 -4 a--
a 3
-faa' *a3 a a /cta .3 - 'ta.' 3' -- - - -
-- ' aa
---- -- r --- a- I. 3 a a a a3 a a aa- - 'a 'a-a,- a aa aa 3' a aaa ,Uaaaaa-p
'a- a -" - a-a. a '3 a33 Va a3
,-aa ta-a-a ZaaŽa aa3< 9'kat S-- ---- ---------- ------ -- ------ - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ---
- a aaaa aa a
- a, a-a' 3 " a- 3i a a-- a-- a-- a
- ------------- a S07 a-a a a a - - -a--a -a-- -
a -----a ------ a ; ...... 4
----- -a -- --- - -- a a a a a --a-- - --a ----
a a.3 a -
- 4. 97o'
------------------ - W
-tt--- - -- -
a-a------------- -939
-a -- ' -a -- -- -
- a'-- -- a-- ------------------
a aa a- -- a--
-- ajc
-- --- ýa
------- 3- a--- - - - - - -
-- a.;-- --
a-a-
~ -------
--' ---aa --
3a) -- a
$a
-- 4'--
.A
---------- -- - 1/2-a' yaaaa'a 3+/-,a' -- a--
a a- a-3'-- a a--
- a-- a-a-a--
G'9 3' a - a a.. - -- -
------------------ -a- - - - - - - -
-- a-43 -- a--- a---A 7 ---
a'-- t---a aa3 -- -- a--
- :7-7 - -- - - - -- - - - - -- - a----- - - --
--- - --- - a - -a - - a-.-
-- a---
-- a-a-- - -9's
'a --- t aa~~aa-ta I I. -"' -%8a.
- a a -- 3 a-a - --------- a a -
a
~t..
aya-aa a' p 4 a- a a a -a. ' --a I
~daa-'GIZZOa.a-aa'aa g~ a 3"(a3'a' 44p a'
.a3aa
~a a$4 a-3( W a-lat.X1/4~M~aa3'~aW~-aaa.~a-~d-fl aa-a&aaaaaWa-ra, cia.
33,'4,a.3- aa-t-a 4 3 faa'- ~aaa - .a-Ja 7*~'a-a' g a
- aaat" 3ta~pa-~aaj~a
-IIO
<-;Q)a
,alO~
-4 a~ a a
.a'9 3
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE ELA-Z. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 S~Reactor Head Penetration F;A-Ar ZMAN*P Ultrasonic Examination Data Sheet customer: WJ trC Plant: Ko*- P-)e*e,.- Unit: Penetration No.: Procedure: Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " q 2 z//o 16 Channel P/R N/A 1A ACCUSONEXI Data Acquisition Software: Version 6.2.5 ACCUSONEX mData Analysis Software: Version3 3.1B Cable Length: so' Type: 2e.- t--q # Intermediate Connectors: I Calibration Block: (,,o//q306o1 Calibration Setup: 4Scan File No.:. Initial Calibration File: /ZZc," .L.z6.q
.'3L q4zz.cV? 09. DO.q8 Final Calibration File: C,,-jU %A't,,M .
Scan Start: Z = r-O.- Scan Start:0= -5 Scan Stop: Z= 43 Scan Stop: 0 ='*3., Index Increment: 30 Channel Angle Serial No. Comments I 5-J. o50420c/14 Results: No Recordable Indications Leak Path Detected Axial Flaws Detecte Circumferential Flaws Detected Comments: Analyzed 15y: :_Level: Date: / H!z [Reviewed b : *_.. Level: 2 Date: a/D/- TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
7 P,A4,5'T A CRDM Nozzle Ultrannk Eyminafinn fl2t2 hacf Customer: Nuclear Management Cor poration Plant: Point Beach Unit: 1 Nozzle: I Procedure: 54-ISI-100-09 Nozzle Dimensions: (ph.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (del.): 0 End of Noz, (in.): 0.26 Probe Serial No.'s: Ch i S0420CN Ch 6 n/a CirX. Scan
,t Start:l__ de -0.7 " Stop:I 4.3 Ideg I -385' Setup:[.3 Ch4 n/a Ch9 n/a Files: A2267_08.00.48 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adiusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) . (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I OD 0.37 1.4 2080 1.9 209.0 0.46 208.0 209.0 0.03 0.46 4 0.25 0.54 AXIAL 1.9 2.7 2 OD 052 1.6 80.0 1.8 820 0.18 80.0 82.0 0.07 -0.19 21 0.10 - 0.54 AXIAL 1.8 2.6 3 OD 051 2.3 1040 1.6 1050 0.70 104.0 105.0 0.03 0.70 3 0.12 0.17 AXIAL 1.8 2.6 4 OD 0.43 1.4 144.0 1.8 144.0 0.39 144.0 144.0 0.00 0.39 0 0.19 0.49 AXIAL 1.8 2.7 5 OD 0.55 1.6 166.0 1.8 166.0 0.23 166.0 166.0 0.00 0.23 0 0.08 0.33 AXIAL 1.9 2_6 6 OD 0.53 1.3 188.0 1.8 1880 0.52 188.0 188.0 0.00 0.52 0 0.10 0.19 AXIAL 1.9 2.7 7 OD 0.55 1.7 2880 1 1.8 - 2880 0.10 288.0 288.0 0.00 0.10 0 0.08 0.76- AXIAL 1.8 2.8 8 OD 045 1.7 3350 2.7 335.0 0.98 335.0 335.0 0.00 0.98 0 C.18 0.18 AXIAL 1.9 2.8 9 OD 0.58 2.5 229.0 1.5 231.0 1.00 229.0 231.0 0.07 1.00 4 0.05 0.05 AXIAL 10 1.9 2.8_
11 ____ ____ ___ 12 13 14 15 16 17 Data Loc. 0 30 .60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 Inches MAX. 2.85 2.83 2.82 2.79 2.78 2.80 2.86 2 87 2.88 283 2.82 2 86 2.85 Inches
,MIN. 1.80 1.72 1.72 1.75 1.74 1.75 1.80 1.80 1.82 1.84 1.87 1.90 1.80 Inches Comments: Measured Thickness: 0.628 @theta of 233 deg with an axial position of 1.11 Limited Scan? (YIN): y 074=1103 Indication at root of weld. Depth from ID0 587" Z extent 2.26" to 3.03" theta extent 12 to 28 deg center location z=2.79" theta=22 deg 0 degree data position aligns with 0 or W axis Limitation - No leak path call. Required distance above weld 2.0" (paragraph 6 3) Distance above weld is 1 61".
No Limitation - Area of Interest above weld for crack detection is 1.0" (paragraph 6.2 of procedure). Analyzed by: Ij /I Date: L/2A- Analyzed by: /V/,9- Date: A$'9 9/24/024:24 PM Nozz 1 Page I of 2
Z Jo Z e6ed I. WJ40Q I. ZZON ZO/1lI6V'Jd £tZ:t7 LcIt't uol;lewewep IA!quMoO I I!qdn,,,,,, S,1 LL_____ L;"--- -- 44,4z '- 2 . . . /
.1. 1-I-
454.-,. -- ---- 4 4.
.44444 .,4' 1'*' ---- - -- -- - --
- 4 44 l i i I i
-- --. -- --- ---- ---- -s--
L " -ý
-- --7 --------
--- 1 --- 7 -- 4 07 oT I------------------ ------------------
I f-g. f ...................
- O' f ................... - 9'P7
------------------ C")
- . . . .. . . . . . . . . . . . . . . ------------------ - o0 0
"-----------"... ... -- - --- -- I--
-gu F-'" " -----.....-- ------------------
"- 0"9
-- - - l. . . . .. . . .. ... .
------------------ --- =1
- *4
.1-. . . . . . . . . ------- -- --- ---- 44
- '6 '1
.. .. 4--.. .. .. .. -- -- ' -- - - U9----- 9.9 7, --.
- -- -- - $45
,.4
't8A,9 VW-Z -4. dNV3nO+/-*4VthJ
o 4 A PRAMATOM E ANP CRDM Nozzle Ultrasonic Examination Dlata 5nhpaf Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: I Procedure: 54-ISI-100-09 Nozzle Dimensions: (1*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch I S0379CN Ch 8 Axi alS?. n/a IA,.;Stohl "t . * *.deg . ? - k Ch2n/ Axia$~.StbgL; 1,4 .Setupl;~ Ch n/a 4 .. ____.. Ch7na Circ. Scan Start:[1 -deg .ah 3 nla Chn
@1 -0.7 1 Stop:1 365 Ideg @1 31' Setup:1 3 Ch4 n/a Ch9 n/a Files: A2269 19.09 461A2267 08.00.04 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted CIrc. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (dog.) (in.) (dog.) (deg.) (in.) (in.) (dog.) (in.) Ratio Orientation Min Max 1 OD 0.56 1.7 00 2.1 00 0.40 0.0 0.0 0.00 IT 0.40 0 0.06 0.16 AXIAL 2 OD 0.55 1.8 21.0 2.9 21.0 1.10 21.0 1.6 3.1 21.0 0.00 1.10 0 0.08 0.07 AXIAL 1.6 3.1 3 OD 0.51 18 750 2.5 750 0.69 75.0 75.0 0.00 0.69 0 0.12 0.17 AXIAL 1.6 2.9 4 OD 0.59 1.8 88.0 26 88.0 0.81 88.0 88.0 0.00 0.81 0 0.04 0.04 AXIAL 1.6 3.0 5 OD 0.51 1.8 1330 2.7 1330 0.90 133.0 133.0 0.00 0.90 0 0.12 0.13 AXIAL 1.6 30 6 OD 0.48 1.8 150.0 28 1500 1.00 150.0 150.0 0.00 1.00 0 0.15 0.15 AXIAL 1.6 3.1 7 OD 044 1.8 234 0 1, 2.5 234.0 0.70 234.0 234.0 0.00 0.70 0 0.19 0.26 AXIAL 1.6 2.9 8 OD 0.46 1.8 255.0 2.5 2550 0.70 255.0 255.0 0.00 0.70 0 0.17 0.24 AXIAL 1.6 2.9 9 OD 0.52 1.8 2750 2.4 275.0 0.56 275.0 275.0 0.00 0.56 0 0.11 0.19 AXIAL 1.6 3.0 10 OD 0.32 1.6 2920 2.5 292.0 0.89 292.0 292.0 0.00 0.89 0 0.31 0.34 AXIAL 1.6 3.0 11 OD 047 1.7 316.0 2.3 3160 0.63 316.0 316.0 0.00 0.63 0 0.16 0.25 AXIAL 1.6 2.8 12 OD 0.47 1.8 3370 2.5 337.0 0.74 337.0 337.0 0.00 0.74 0 0.16 0.21 AXIAL 1.6 3.0 13 14 15 16------
17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz.Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 3.01 305 320 3.20 3.10 3.05 3.11 301 320 330 3.10 3.05 305 Inches MIN. 1.51 1.56 1.56 1.56 1.56 1.51 1.56 1.51 1.66 1.56 1.56 1.51 1.56 Inches Comments: Measured Thickness: 0.625 @ theta of 65 dog with an axial position of 0.931 Limited Scan? (YIN): y am.-'*=* ,,*m All flaws dimensionalý intersect with the wetted surface of the weld filet LImitation - No leak path call. Required distance above weld 2.0" (paragraph 6.3) Distance above weld is 161'. No Lim itatlon - Area of interest above weld for crack detection is 1.0" (paragraph 6.2 of procedure). Analyzed by: - Date: - Analyzed by: Date: 1v 9/29/0210.48 AM Nozz I FINAL Page 1 of 2 c~c~ed b
Plprti Z1 Zeieed 1.12840 1IVNIdI J.flOf EOI6ZI6V'V 817:%. L-PUW ZON- 9L --- 9L--t U
- UL-- LLý-OL-- -- G- 9-t-9-V- 'S- i z
99
' t I
,.~a
,.',O'
~ a a"
- a. a0/
mi
* - )2. Oa,aja.aI
-t a pa' laiaa 'at'" - a- a' ' aa aaa
- . ,' a,, a,a ,&,
- ------- a-.- -- a a pa I.' 'a aa. '-.
aa a.) 'a.aa'a
,.. a aaaa'a4Uaaa4aaa a-,.) aaaxara 'ta"; -
-7,4. -
a 4. ,a,aa ya
------------ ----- ------- .9. I 4 a Ca; I. I
----------------- , a.77 a' A - 'a- ,a---
lit:; at--a: 97;
-- '-a ----- -' -- -- -- -------------------
'a' K --- 'a, a-V-- a ----
a -- ----- ---- ---- -- a a aSP' --. a--- -
----- -- -- -- - 4-------
-- ---- -- -- -- - a . --(a-- --
--a. -- - -- - alat.--- --
---- aa-a.---y--- -------------------
-STC laaa-,a----.a- a
-- - - --- -OaT
-N- - - ~
a
------------------- -- aa a'--,----- a -a' G'9
- 'a.' --- . --- ---
------------------- --- aa---- --t ---. -a
-- a--- --- a
-- - a--- ---.
A- ---------------- a -- - - - -- - - - a'... a- -, - -- -OL a a
-- a----- --- a ;Aa ---- %N t
----- s--
a t~ Ia
--------- a --
t
------------- I----- It ---
- -- -- - - - - .. ataay-a Aa-.--- -a-2 aa, .axaal k-a-tc aaa--a---,taaf a 4 --
f---------- ----------------- a a, - - - - - - - - a-.-
--a- -- --
a - -~- - - - a- -a -- - £--
,a.,aaa.. aa.-- --------------
-6T 2'ý I I
'IdNV aY
POINT BEACH NUCLEAR PLANT LIQUID PENETRANT EXAMINATION RECORD Component ID: Component
Description:
Site / Proj'-ict: Page I of 3 RPV CRDMfNozzleNgumber I I Sheet Number or Work Order Number. 4S10003 PBNPlI R27 ISO Number: NDE Procedure Number / Revision: I Surface Condition N/A NDE-451 Rev. 20 TCN2002-0539 E AS-Welded []Ground E3 Machined Cl Other: xaminer(s) / Level / Date (Print):
.:A.JENSEN III 09-25-02 Temperature Device Manufacturer: FLUKE MT&E Number: MCDP-012 L. Location: _ W. Location:
Calibration Due Date 12-03-02 Surface Temp.: 72.4 0 F J'essel 0 Edge of Weld PENETRANT MATERIALS PRE-CLEANER PENETRANT RkMOVER Manufacturer/Brand: Ifet-L-Chek Manufacturer/Brand: Met-L-Chek DEVELOPER Manufacturer/Brand.AMet-L-Chek Type: E-59A Type: P'P-31A Manufacturer/Brand: ifet-L-Chek Type: E-59A Batch Number: 3930 Batch Number: 2654 Type: D-70 Batch Number: 3930 Drying Time: 2 mhh,. Dwell Time: 30 min. Batch Number: 4151 Drying Time: 2 mni. Dw~ell Time: 30 reIn. Indication No. L Location W Location Dwell Time: 30 mm. Upstream or Downstream - Round or Linear i Size Rernark* 1 Appx. 140 Deg. 1/4 in. N/I Linear 5/64 Indicatlon is light.Appx. 1 1/4 in. from bottom oftube Additional Remarks: See attachedphoto and sketch. .4 , & ,YOC4 -Oo-? / gt 0 , Limitations- If None, so State: NONE Examiner(s) / Level / Date (Signature): Revieyer I Level / Date: ( Oq-* 4 tt, ANII Review / Date: El N/A
/
/ 02 _Z _6_
i Form NDE 450.1 Revision 13 08/,15/01
QL 4w
.I View From Below 4' 5%
Indication #1 appx. this location 2700 (Stud 37)
1.. FRAMATOME-ANP RemoteUltrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-I, 54-PQ-i 00-2,.3, 4 and 5I A"Reactor Head Penetration tPRAM ,TaC ANP Ultrasonic Examination Data Sheet Customer: N,.Ma [Plant: B,*k, Unit: Penetration No.: 7- Procedure: 5- ISi- tO-"*'* Equipment: Description VH# Cal. Due Date SN# p.Tomoscan ' "1//o3 =.Z;q 16 Channel P/R N/A 1A ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3 3.25 Cable Length: Sol Type: !e'-i-4-q # Intermediate Connectors: 1 Calibration Block: o//q.o-/ Calibration Setup:
"Scan File No.: Initial Calibration File: Zt,-'. "2.09 A z7Z4-.7- 5".zZl-. Final Calibration File: cow 2 ., juep p -A Scan Start: Z - -.. Scan Start: 6 = -" Scan Stop: Z = (...- Scan Stop: 0 =3G"5 Index Increment: 3 ° Channel Angle Serial No. Comments
/ 5"o'1.. So 3Gl cN Results: JC-No Recordable ndication Leak Path Detected Axial Flaws Detected- Circumferential Flaws Detected Comments:
Anal ed bY: ,,_ evel: *Date: /,. 0. Reviewed by: i2~ QLevel: Z Date: /2~ TYPICAL DATA SHEET FIGURE 5 fýC(\4A 1l1 Page 31 of 32
A RAMATtA F N: CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 2 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iA.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg[.): 140 End of Noz. (in.): 0.58 Probe Serial No.'s: Ch I S0381CN Ch 6 nla a n , t , , , Idea :I Setup1, e-op.- ..- Ch2 n/a Ch7 n/a SCh3 n/a Ch8 n/a Circ. Scan Start:L.5 deg @1 -0.7 1" Stop:IL 365 Ideg @1 6.78 Setup: 3 Ch4 n/a Ch9 n/a Files: A2267 17.53.20 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 1 NRI
-2 -3 -4 -5 6
7 ; 8 9 10 11 12 13 14 15 16 5* __ _ _ _ _ _ __ _ _ _ _ _ _ __ _ _ _ _ _ __ _ __ _ _ _ D ate___ 17Data Loc. 140 170 200 230 260 290 320 350 20 50 80 110 140 Degrees ' WELD Noz. Loc. 0 30 160 90 120 1150 180 210 240 270 300 330 360 IDeglrees POLE Noz. End 0.58' 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 Inches PRFL MAX, 3.15 3 31 3 49 3 93 4.31 4.57 14.61 4.55 4.37 4.09 3.73 3.45 3.15 Inches IMIN. 1.87 1 87 1.95 2.45 2.99 3,35 13.47 3,41 3.09 2.75 2 27 1.93 1.87 Inches Comments: Measured Tickness: 0 619 @ theta of 161 _deg with an axial position of 5.19 Limited Scan? (YIN): I N Analyzed by: * *Date: ... , t,...
-,0Z.- Analyzed by: 7Dae U *
(6) 91241027:50 PM Nozz 2 page I of 2
". Nozzle 2Profli4,'.:
FRAMATOM, ANP, :- -. ' . - . -" "
*. . ... .. 1'. ..- *o'
14 5 ..---- -- , 4 ---
,--'.'..* * *. -.. - -- -----...- -. '-I. ------
4-0 2 ---------- -1 ---- 7-- -- --.-.... . . - ----- 13.50 .. ... . . . . . . . . . . . . . . . . . . . . . . . . . -- . . -. -- - --- - ---I........ . . . . . . 12.5 :- ......... . . . .. . . . . . .. 11 0.. ...........------------- -------------------. -------------------..-------------------.-------------------.--------------------. 10 .15 ..........------------- ..------------------ ..------------------..------------------..------------------. .------------------ 10.0 10.5 --------------------------------------- ------------------- -------------------------------------- 9.0 ------------------------------------- ------------------- --------------------------------------- ------------------- 8.5 -------------------------------------- ------------------- 7.0 - 6.0 -. -------------------. -------------------. -------------------. -------------------.-------------------.------------------- ------------------- 7.0 3.57 ---
--.................................. V ................................. ................................. -----------------
3 .0 . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . .. .. . . . . .. . . . -.- -.--.. 5.5 " - -
- pL3ugamwmnagMv,aPiv
-,------ ------ . ----------.I.----, *.* * -z- ------ .......... . I.. -. * .
M ~Tiiu
. 43M....
4.0 3.0 - ljj3Al~~ iiidl~ . Downhill, h.. -- 0.0 0.5
- -------- -- y ,,-----. .. . ,, , *, ,', ,* S 0.5 6l _111I .. "ý, , ý Jt,-Y -- iVt ý 2.0. '::-,'. .'..100 .:.:i* "* 15 1.. fl,, ,A,, ; -, 200. . . 250 4
*. 2.4 rNz.En -8
'- 9 .* 10 -15 - -12
,.... End
- 1 'p D -- 16
-1 -
Nozz 2 Chart I Page-2 of 2 7:50 PM9/24/02
1kc FRAMATOME-ANP NONDESTRUCTIVE FXCAMIN4AT1C3J P'Rnr* *I /3t-A-z* 7 Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-1SI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2 3, 4 and 5 A PRA-MA'r .MEAPI Reactor Head Penetration Ultrasonic Examination Data Sheet Customer: W M-C Plant: , IBe,,ýJ. Unit: Penetration No.: 3 Procedure: 5q- 15/- jOo-o"j Equipment: Description VH# Cal. Due Date SN#
. I jTomoscan "1o14q 16 Channel P/R N/A N 1,/1, ACCUSONEX v-Data Acquisition Software: Version 6.2.5 ACCUSONEX"A Data Analysis Software: Version, ".
Cable Length: - cc) Type: Ze&- i-q # Intermediate Connectors: I 4Calibration Block: "*o,,I,/3o.e; Calibration Setup: Scan File No.: A C, o'z .-..- Initial Calibration File: 4 qz0z(,. A-vZc..,,. or. c.Lis1< Final Calibration File: c,r -OIJurp, "FJL 7. Scan Start: Z = Scan Start: 0 -:5 Scan Stop: Z =6.-V8 Scan Stop: 0= *C.s Index Increment: 3' NODSRUTV EAIAMNPOCDR te Channel
/
Anqle 5"o.. Serial No.
- 5 q"*cM Comments
/
Results: I c!-e3c7ordable Indication-s Leak Path Detected Axial Flaws Detec-ea -: Circumferential Flaws Detected Comments: Analyzed by: evel: Date: /re " Reviewed by: Level: Date: / ,,. TYPICAL DATA SHEET (AA 1 O9-2 FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOM E ANIP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 3 Procedure: 54-ISI-100-09 Nozzle Dimensions: (inn ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 17 End of NozL (in.): 0.24 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a Axial Scar ' *Startl I *kLde{].',@ & lI'1'St6p' I ,Ideg :.-, .:" ,Setup: v ,: Ch2 n/a Ch7 nla {' ~ *ý j: Ch 3 n/a C / Circ. Scan Start: -5deg @1 -0 " Stop:I 365 Ideg @1 6.781' Setup: 3 Ch4 n/a Ch9 n/a Files: A226908.36.54 IA2269_08.48.15 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw 0 Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI \' 2' 3 4 5 6 7 . 8 9 10 11 12 13 14 15
'16 17Data Loc. 17 47 "" 77 107 137 167 197 227 257 287 317 347 17 Degrees WELD iNoz. Loc. 0 30 60 90 120 150 1180 210 240 270 300 330 360 Deqlrees PROFILE Noz. End 0.24 0.24 10.24 10.24 10.24 10.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Inches MAX. 3.35 3 66 14 00 14.37_ 4.39 14.27 3 97 3 62 3 29 3.10 3.00 3.19 3.36 Inches MIN. 1 98 2.37 2.92 3.27 13.31 13.17 2.83 2.27 1.92 11.71 11.73 1.73 1.98 lInches Comments: Measured Thickness: 10,618 @*theta of 1 2261 deg with an axia poitono 5.81 Limited Scan? (YIN):l n I Analyzed by: Date: ? /Zr,/4 , Analyzed by: 2 ,i Z'4 Date:
91261023:19 PM Nozz 3 Page 1 of 2
'-Ag.~~~oz a 3a 8,'I..4 a a 'aaa a
- a. FRAMAOMM ANP'., a . ' "... . aa%.,,.'.
103 1/2 . . _', .** _. ". __ '.: ' .. . . . .... .. . . .'.. ..". . .'. -- ..... .>. , . . - a-- ' - , * ., a .- - ' ,, -t .. k' * ,, , ,-.., , ,,'a .to, 14------ 14.0 a----- - - - - - - - - - --- -- - - - - - 125012 , ...------ --- -- - - - - - - - - - - - -' - - - - - - - - - - - - - - -- - - - - -- - - -' - --- - --- g22z2 'aF' 14.5 .-...... .
- -- ---.........-......... ..... : ,-'- A .
2 o ,
,4" ..... .$,.J,-af- :;.... ..*
12.5 12.0' - --- 4---------------------------- ----------------------- -~ a?.t'j 9 -. - 5*- - - ~ ~
- a - a a- a .- a - -- - - - - - - - - - - - - - - - - - - - a--
. a , a 'a a a ;
1 .5 ---------------------- .--- .--------------- .--- .--------------- .--- .------------------------------------------------------------------------ .--- .--
.055 .-.------- ------ ------ .-.----- ------------ .-.---- ------------- .-.------- - ---------- --- ---------- ---- ----------------------- ------ -- - --------- - - ---
110.5 0.0 - .------------------- .-------------------.-------------------. -------- ------------ ----------- ---- ------ -------------------- -------- ------------ --- 10.0 7.50-- ---------- -- ---------------------- :. ....................................... 6.0 5 - . ... -- - - - - - - - - - - - - - - - - - - - - --.- 65.5.0 ----------- ,. ---------------------------------------------------- 7.55 -.------------------ ----------------- ------------------ ------------------------------------ ---------------------------------------- 7.0,5 --.....- ------ *-........ 6 .5 ...
--- -- -- -- -- -- ----------------- III -- --- --- --- --- -- -- - - I[IIUI
- III.
-- - - - -- - - - ------------- .=--- -- - -- *.. ---- . . " --------------------
Downhili' 2.0 -Side,,,,
1.0 a-----
s ~ a1a ------ 4' 0 .5 '--------- a -- ----------- 0 .0- --- -- - -- - -- - -- - -- - -- - -- - - - - - - ----- - -ar 0 1z~ .' 3 - ' . -- a1 0% -'-- --------- ----- -------- -----a--. a- .. aa-- a..
.y.Zr ~~10 ~ - 150O 200.25 30 aaa&? a;?3O.
4aa ; .-'a ,a I "". . ', g' 4 a' ,A' a'QN q ' ta~a
-- 2 -3 -- 4
-6 -- 7 -- 8 10 -- 11 -- 12
. - .. 16 I~ ~'t
- 3 --
=-*14-14
-- 15
--u-unUphill / Downhill demarcation Etr-Noz. End 3:19 PM9/26/02 Nozz 3 Chart I Page 2 of 2,
L Cu£C I. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Hbad Penetrations PROCEDURE NO.: 54-fSI-lOo-0g I PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 I Reactor Head Penetration FRAUATOM* AMP Ultrasonic Examination Data Sheet Customer: N MC c Plant: - 3epe.L Unit: Penetration No.: lProcedure: 5- ISI- ,LO-') Equipment: Description VH# Cal. Due Date SN# gTomoscan " "I *'l,, "/2.0-o3zq 16 Channel P/R INA N AA ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3.5', V,, Cable Length: GOC Type: Ze.- 14-q # Intermediate Connectors: I Calibration Block: "o//q3o - Calibration Setup: Scan File No.: Initial Calibration File:A 2 6//A.."q Final Calibration File: cosinwurb r-Epommnk.4 7 Scan Start: Z - Scan Start: 0= - ° Scan Stop: Z = ,7 Scan Stop: 8= Index Increment: 30 Channel Angle Serial No. Comments Results: 00 Recordabll ndicatinn) I Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed 6y. Level: - Date: P- ;-02 Reviewed by: Level: 4L2Date: la . 7 TYPICAL DATA SHEET 6ew.2'ICJl. FIGURE 5 Page 31 of 32
S IFRAAATOME ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - Nozzle: 4 Procedure: 54-ISl-100-09 INozzle Dimensions: (irft) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.2 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a Axial SC~afmlt' i' ~'.S-t;I;Pýdg@I SIoe:~~I~g~L~;~ tupl Ch 2 n/a Ch 7 n/a F! ... '- ; , f... .:Vv- Ch3 nla Ch8 n/a Circ. Scan Start: j-5deg @ -0.7" Stop:i 365 Ideg @ 6,781' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_01.08.37 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adlusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to MIn Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I N RI _ ... ... . 3 4 5 6 7 9 10 11 12 13 14 17 Data Loc. 0 30 60 90 120 "150 180 210 1240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.20 0.20 0.20 0.20 0.20 "0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Inches MAX. 2 67 2 79 '3.29 3.71 4 05 4.27# 4.207 4.17 3 83 3 47 13 09 2.85 2.67 Inches MIN. 1 68 1.76 2.17 2.73 3.19 3.43'1 3.53 3 33 2.97 2.41 2 03 1.84 1.68 Inches Comments: Measured Thickness: 0 64 @* theta of 188 deg!with an axial position of 55 Limited Scan? (YIN): N Analyzed by: Date: -02_ Analyzed by: Date: 10 # - v 4 o0.-Zj.--l~ 9/241028:35 AM Noz 4 Page I of 2
.4"'
'4' I., 1'
' FRAMATOME AN , . - NozIe 4 Profile ' "S .\'k
'4' .;.
/5Z ( .
'.,' 4,:.:,:."* * :' ji.. . ';:,:: ."4:'"4" " . . -. - II 44 4* *'
- - -'2.2 *a '
14, 5u 14.0- -... .4 ,,..,'. , ---. 'v*:.;...;,'_. .< -,;.; ;;-*.'*. . .__ . . . . I 1 ..... .... ... . ................ 7------------ 7'7-- .................. 14.0 ... ... . - -'- ---- - -- --------------- ' - -- ----------- ----------------- ----------------- 12.5: -----------. ----------------- ----------------- 12.0' : "... ----------------- ----------------- 11.5 " - ' - - - ----------------- 11.0 -------------------------------------.., -................--............... ----------------- .................. 10.5 --------- -------- .. ..--- 10.0 ----------------- 9.0 5-----
----... . I . . .----------. . . . . I.. . . . . . . . I.--- . .. . . .. ---------------
I.,... ......... 8.5 4 -------- I-------- I-------- I-------- ------------------ 77 55 -.-.--------------- .- .----------- ---. -----------------. ---. ---------- --. -----. --------------------------- -----------------------...----- ...- 7.0 7.-- -- - - - - - - --- -- -- -- " -- - - - - - - - - - - - - - - - - - I- - -- - - - - - - - - - - - - - - - - - - - - - ---
.50
- 5. --- -- -- - --- - - --- - -- - -
5.5 1......................................................5 -"...................
.......... 14 2,5 * , == *m , ~mm = = m w = = = == = =* ' " .I.... . .. ,*- -- -,,= -- "'-- - "
Downhill 0.5 3. ;;-* . ..-* ',*:..... ...... .. * . ......... --................ ------ 4.*:-* ...
- 1.5 .
* ::.- :.'."-::.... "4.
; . -.I-.' ---------- :..... - ---. -------
4".. ....... . . . .'. ,4 "arr-
,*!-y' 1 a'
*" a.- 3 - 4-
-5 -- 6 -7 -8
-9 -10 -11 -12
,13 115 l -- 16
-Noz. End 1 ammmrnuaaUphill I Downhill demarcation 8:35 AM9/24/02 Noz 4 Chart 1 Pagb 2 of 2
0AC . FRAMATOME-ANP NONDESTRUCTIVE EXAMINATIrHN PRflC*Fnlfll=P Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration PRA4r,* a, AMP Ultrasonic Examination Data Sheet Customer: WM .C Plant: OI*a.. AJ.. Unit: Penetration No.: -4 Procedure: 5- /S/- oO-' Equipment: Description VH# Cal. Due Date SN#
.Tomoscan "-I1-4o3 1 .- c.
16 Channel P/R N/A NA1 /.A ACCUSONEX"4 Data Acquisition Software: Version 6.2.5 ACCUSONEX Data Analysis Software: Version .- 5 " Cable Length:- *0' Type: Ze,- 1u,-q # Intermediate Connectors: I
,Calibration Block: &0/19306/ . Calibration Setup:
Scan File No.: , I.'p7 Initial Calibration File: A- 2S 9._ 1
.,1' Final Calibration File: cr,,Jr M '.,"
, a() ; .34.9 Scan Start: Z = -. 7 Scan Start:'G = -° Scan Stop: Z = (,.7F; Scan Stop: 8 =.7es-° Index Increment: 31 Chann I Angle I Serial No. Comments
/ 5.0.. 5e ,a. c_ x
/
Results: o ecordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected "Itr Comments: Analzed b: ,.. ,Level: 7 Date: f-23-02.- Reviewed by: Level: -Date: /0- /. , TYPICAL DATA SHEET 40* 01.01,4, Ar/ FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOME ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 5 Procedure: 54-IS1-100-09 Nozzle Dimensions: (inr ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.34 Probe Serial No.'s: Ch i S0420CN Ch 6 nla Axial Scan .. 't e4 ) . , top: ,:. deg ,@ *: .- %LSetup: Ch 2 n/a Ch 7 n/a
~
Fjes- ~ ~~ S>-Ch3 n/a Ch 8 n/a Circ. Scan Start:I -51deg @L L-.,7"j Stop:I 365 Ideg @_ 6.78' Setup: Ch4 n/a Ch9 n/a Files: A2266_16.28.44 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI ,_ 3 4 5 6 7 10 11 12 13 14 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 1150 180 210 240 ... 270 300 330 360 Degrees PROFILE Noz. End 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 Inches WAX. 3.20 338 3.78 4.18 4.57 4.79' 4.85 4.72 4.43 40 354 327 3.20 lInches IMIN. 1.79 `1.95 2.28 2.65 30TO6 3.34 3.40 3.22 12.85 247 2.03 1.79 1.79 nhes ne Comments: Measured Tickness 0.5@ theta of 77 deg with an axial position of 1 4.51 _Limnited Scan? (YIN) N Analyze d by :
--__* /* ,* * . *D ate: _ . o __A nalyzed by :
- AD ate:
9/241028"35 AM Nozzle 5 Page 1 of 2
4 .4 .4 (4 44
- 4. 4 -4 4 444.
4.t.4 4
- IFRAMATOME ANP - ', - .4 4 4,.
44
-I - -
4,4 4
v' 4-4
.4 S 145.0 - " "'4-... .'.. <~.. .4' ' ...
4..". .. . ... 7. 4 4 4,4., 14.5 .. . . . . . -.. ............ 13.'-":- 47-- --- 13.0 -----------
,. S_.:..-.'.:..::'.!
1 2.0 . . . . . . .. . . . .. . . . . . . . . . .. ... . . . ----------- 12.5 -- - -- - - -- 12.0 11I5 - ~.~ - - - - -I , 4 -------------- . 4. . . 4.. . 4 - '. 11.0 - - ........... ...... S.................. .................. 10.5" ........ -L ------- ---------------- ---------------- ................. ----------------- i..... I - - --
- 4 10.0 --------- ---------------- ---------------- .................
9.5 9.0 ---- 8.5 ........ --------- ---------------- ----------------- 8.0 ........ .......... ................. ................. ------------------ 7.5 ........ --------- ----------------- ---------------- 7.0 ........ ---------- ------------- ----------------- 6.5 ........ 6.0 ........ ----------------- ----------------- ----------------- ----------------- ----------------- ----------------- 5.5 ------- ----------- ----------------- .................. .................. .................. .................. ----------------- 5.0 -- ----- ----- ------------------ 4.5 k A
--------- __ I ------------------ I .uuea.u A miuitnuumuunaauus A nnfueegffcnnasuu I, 4.0 unauvnuuui iuijwtflNAEfmguTje4 in.inw1 usuuuainun
- 2 ': 44,,
3.5 5 ,S 4 ?& 3.0 ---- - -- ---- - 44p4 (f*4\4)4S Downhill 2.5 ------- --4 --- -- 4, 4444
- ---:-:.- 7 -----
2.0'° --- 1.5' ----- ---- - 4- 4
- 47---
7.--- I., 1.0.5 0.25 *'7" .. . 4... . ----- ----- ---- 00,' _. 4
- p
'0 -4 . I I-
- 44 200'. 250, : 1- ; 300,:O.':>
* ,.4 _
- S,4.44 "~ " '4 ' -' ?' '" " . . . *,**,, t" - 4",* .4 tJ 4 74
--. 3
-7 ji-9 -11 iw. -- 13 - 15
'- Uphill / Downhill demarcation
.- Noz. End I 8:35 AM9/24/02 Nozzle 5 Chart I Page 2 of 2
??
ki -' FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Hfead Penetrations *P O PQ-100-1, ROCEDURE
* ' PQ NO.: NO.: 54-ISI-1 54-PQ-100-2, 00-095 3, 4 and A Reactor Head Penetration RA*4 - ItZ AMP Ultrasonic Examination Data Sheet Customer: Nimc Plant: Po,,*,A 4 BeA Unit: I Penetration No.: C. Procedure: 4.'£ I5/- /AO-0f Equipment:
Description VH# Cal. Due Date SN# pTomoscan 11 ,2- /-7o o37 16 Channel P/R t/A PI/4 I/,1 ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 350 & Cable Length: 501 Type: # Intermediate I-U.. Connectors: I Calibration Block: &o// 3vE/ Calibration Setup: Scan File No.: Initial Calibration File: A 7 =t,... ,o. - Z/ . 0 A 'ZZt,*...- /0' Final Calibration File: -, ./,6C3I7 Scan Start: Z-- O,,1 Scan Start: e = -5 Scan Stop: Z = II. Sl. Scan Stop: 0 =3o5' Index Increment: 30 Channel Angle Serial No. Comments 1 6' .30
*- 30,"t. -3 "5 o Z. "roF:D Z3 . &O3s 355oZo
&,*s 1" '_,'3 6 0 -z Results: o Recordable Indications-' Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected RComments.:
-Reviewed by: * ,.,_ j a .,. Level:- -'L_ Date: /6/;2 lo __ TYPICAL DATA SHEET FIGURE 5 q~ 1j 6523U Pace 31 of 32
IAN r- Z MKdA~rC1KAE = t WP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - _ Nozzle: 6 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.t ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 243 End of Noz. (in.): 3.72 Probe Serial No.s: Ch 1 35044 Ch 6 35052 tdeg,,, I - Ch2 35202 Ch7 n/a
*, " .. .- Ch3 35070 Ch8 nla Circ. Scan Start: I -51deg @I 0.47 I" Stop: 365 Ideg @[ 11.82w' Setup: I Chh4 35044 Ch9 n/a Files: A2265_10.15.41 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI "__'
3 4 6 7 8 9 10 11 12 13 14 15 16 17
' Data Loc. 243 273 303 333 3 "33 63 93 123 153 183 213 243 Degrees WELD Noz, Loc. 0 30 "60 90 120 150 180 210 1240 270 300, 330 360 lDeglrees PROFILE Noz. End 3.72 3.72 13.72 3.72 3.72 3.72 3.72 3.72 3.72 3.7'2 3.72 3.72 3.72 Inches MAAX. 6.72 6.76 17.00 7.31 7.42 7.76 7.78 7.69 7.47 ,7.20 7.00 6.76 6 68 Inches MIN. 5.11 5.18 15 43 5.77 6.13 6.40 6.56 6 36 6.18 15.77 5 41 15.22 5 09 Inches Comments: Measured Thckness:j 0 63 @ theta of 212, deg with an axial position of 8.131 Limited Scan? (YIN): N Analyzed by: -'/ ._Date*: /Z/o1.i - Anlye by:A"/p Date:
/ 00 1- ta-si.
Nozzle 6 Page 1 of 2 912210212.01 PM
ZO 10Z9e I 1JE8o 9 e1ZZON g0I72V/61d MU0:;. uoileoJew-p II0qu1o /llqd l I. ,,- -. 6"-' L OL-
-- 9 \ 00 :- .fM... 10
'4
* , -q
",," " ..... ...... ..---...... ..... ..... ....- ...... ..... .l .....
...- A -- - - -- ---- --. ......
- - -- .....----.. ... ... ....-- ---- -------- .. ..------- --.. 7-------- . .. --
S..
. . .. . . . . .. . . .-I-.. . . . . . . .. . . . . ..-I. . . . . . . . . . . . .. . . .- . . ..-.. . . . . . . .. . . . g C
* ..--..
- 3,,,. ,.. * . * . .-. . . .--...
. . ./ r-..
.. . . . . . ~~~~~~~~~~~~~~~~~~~-
.. . . * .- -.- t.--, . --
r .* .-- ..-. .--
- ') .,* .. * . ..o
. . ...-. o
,. * *-*.,4 . 4 O--T-o' CD to
.,.--------.. , .. . . --- . ..-- . -- . .-- . - O's
.- * *',:,X * ,-,;'**! i *,' ....-
,,- ---------?.,,'------ ----------- ......... 0*---...9..........-".....'
'4 * **o . , * ,;, . , *- ,- ,*- - -*--!--'
- - - -- --- 0.-- - - - - - ----.. , ' 0". - -,-- - - - -- G, *9 *'
4.-, ,taA
-... '... .... . . . .g s~~~wo,~ oLm ;-;--; -----------l---- ---------- . . -..----- . ..-
--------..- - ----.. --.. --.. g
"----;----------" :'* ;* ' '"*,;* "'i *".";.'. '"",:'7"- *' ' *'r*":; O*'L-",*"
0i
(. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1k .Reactor Head Penetration P*AU ATOM AMP Ultrasonic Examination Data Sheet Customer: N.MC Plant: o,,. , B o .A Unit: Penetration No.: " Procedure: 6-g- is/.-./00, 4 Equipment: Description VH# Cal. Due Date SN#
.Tomoscan , "/-7o ,o3I 16 Channel P/R ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.--5-".,. ";r Cable Length: 560 Type: Rc.-r1-4 # Intermediate Connectors: I Calibration Block: IniialCalbrCalibration Setup:
tcan File No.: ,q . Initial Calibration File: i 2.. 2/ Final Calibration File: SA e = M.37 Scan Start: Z= .I7 Scan Start: 6= -r' Scan Stop: Z= Io' Scan Stop: 8 = Index Increment: 30 Channel Angle Serial No. Comments
.3o"lj 3 zo 7.. 1D 3- 0.0,c 35040 d5" *,ofe 3 6 o fi Z Results: NoRecordable Indications- Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: Date: f- '-2-0-2 Reviewed by: / Level: Date: O. L v l I /' T""/"YPICAL DATA SHEET 7 FIGURE 5 Page 31 of 32
0 A F::R AIAATO M I ANI: - ... *.. LJL 'IIL customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Procedure: 54-ISI-100-09 Nozzle: 7 INozzle Dimensions: (im) ID: 2.750 OD: 4.000 Thickness: Downhill Side of Nozzle (deg-.): 0.625 258 End of Noz. (in.): 3.58 Probe Serial No.'s: Ch i 35044 Ch 6 35052
...... ,,Scan.,L.
... , St*tIrA,4*t d . Idg kAxial Ch 2 35202 Ch.7 n/a M .,, . , Ch3 35070 Ch8 Circ. Scan Start:L 0.47deg@ [j" Stop:I n/a 19 Ideg @1 365' Setup: I Ch4 35044 Ch9 Files: A2265-19.14.49 n/a Cal Block SIN: 60119300 Ch5 35052 Ch 10 Depth End Point I n/a End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Flaw Surface Weld Location to Min Min Max Max Total Min Max Total Length No. (ID/OD) Flaw Tip Angle TWD Aspect Flaw @ Flaw (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Mn Max 1
2 NRI
- 4 7
-9 10 12 13 14 16 17 Data Loc. 258 288 318 348 18 48 78 108 138 168 198 228 258 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 MAX. 651 6.55 6.79 3.58 Inches 6 98 7.64 7.59 7.59 7.54 7.40 7.17 6.84 6.60 6.51 MIN. 5'00 509 537 5.56 6.27 6.32 627 Inches 6.27 5.94 5.66 5.37 5.19 5.00 Inches Comments: Measured Thickness: 063 @ theta of 185 d*g with an axial position of 102 Limited Scan? (YIN): N Analyzed by: Date: 91 - - C,- Analyzed by: Date:
91231029 31 AM Nozzle 7 Pa~e I of 2
0-.
""14.5 -.. . . -. . ............ ..- .
i * , ;" ... .... . :...-----...---------....- 14 .0 ----------- . .. 13.5
...14.0------ . .... ........ . . ;....-.;.
13.5 ----------- - - - - - .. .... , " , " " ", . 13.....0 ....... --------------
~~
12.0 ~ ... . ...... .............................. 12.5 ---
. .- . . - 1' , , ""' , ""I p71" 11.5 .. . . .. . . . -- "- ':--- -:-------"
1 1.00 " -.- -.- 11.0--------.-.- . . . . .. . . . ..- . .. . ..-. ..-----------------.-... . 0 7----- 50.0 .................. ................. ................. .................. .................. 3.5 ......... 7.0 -.. :12- 1 - ................- 605 5.0 *'**:* ' " ---------- 4 .0 ------------ -- -" - 3 .5-
*. wo*/ -- o- - -- - 1 --- ------------------
3 ----- ---- - --- 14 ----------- 9:31 AM9/23/02 N ozz le 7 C h a rt 1 , ( fý-03 P ag e 2 o f 2
FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION P*mnntto* Remote Ultrasonic Examination Of Reactor Head Penetrations 9 . / I I PROCEDURE NO.: 54-fSI-100-0g PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5
. Reactor Head Penetration FRAMAMME AtNP Ultrasonic Examination Data Sheet Customer: NMC Plant: Po,,,'/ B2lA, -. Unit:
Penetration No.: g" Procedure: " -Is/-/*-/ -of Equipment: Description VH# Cal. Due Date SN# 4Tomoscan 12/7o. 7o3i , 16 Channel P/R 0 ,A t,/, ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3,T& '3.1 Cable Length: 5 o0 Type: RG.- PA # Intermediate Connectors:
*Caflbration Block: 3o//D301E/ Calibration Setup:
Scan File No.: Initial Calibration File: AZ'.cz /0'v.zf'.3 A zzG4,- iSo-. -0 Final Calibration File: R9244- cL-. 19.37 Scan Start: Z .0-,q71 Scan Start: 6 =. S Scan Stop: Z = 17.0 Scan Stop: 0 =t, Index Increment: 30 ChannM1 Angle Serial No. Comments 3 (&0'.s -3500 Lisvz- I soq¶'I Results: - ecordable Indi Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: . evel: Date: '*,Zo .1 Reviewed by: .Level: -1 Date: 9'/2. TYPICAL DATA SHEET 1., S0 FIGURE 5 Page 31 of 32
.A- n, CRDM Nn77'iA I lltrnnip li'njinfi,,i et..
Customer:" -.. . . ~ Nuclear - Management Corporation Plant: Point Beach
~. **~.*IQ ill lLgtl % a La IULP Unit:
I 1 L Nozzle:
--- .8 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.-): 260 End of Noz. (in.): 3.56 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scajt.'.I.. tIbf- .... -"J-W Setdptlj,.I.s,.,." Ch2 35202 Ch7 n/a Fi-,-"2.. .. ,, ........ . .... ....... ;-.
-... .,Ch3 35070 Ch8 35070. n/a Circ. Scan Start: -5deg @1 0.47 " Stop:1 365 Ideg @1 17.62j' Setup:L1 Ch4 35044 Ch9 n/a Files: A2265_15.07.00 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (de g.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 2
-3 4
5 7 8 " 9 10 11 12 13 14 16 Data Loc. 260 290 320 350 20 50 80 110 140 170 200 230 260 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 Inches MAX. 662 6.63 6.84 7.00 7.73 7.68 7.71 7.62 7.37 7.13 6.93 6.74 665 Inches MIN. 5.25 5.23 5.41 5 65 6.46 6.44 6.49 6.35 6.10 585 5.56 5.25 523 Inches Comments: Measured Thickness: 063 1@ theta of 168 deg with an axial position of 8 64 Limited Scan? (Y/N): n Analyzed by:-Date: z .. ,,0 Analyzed by: A Date: Cý/ L.-, 09 o. 9/22/025:12 PM Nozzle 8 Page I of 2
SJo Za6e8d . *IEqO 8 9lZZON ZO/I2/6VWd SE:S UOI1RWaewep 1IP4uMaoo /- 114llu,, Sl, PU3 -ZON! 9k----- OL 6- 4f! LL 9-B £ .==,-= %1,
$7
,°... """;'*
S° ;*,*:
* .g.,.*/r,',, "..."
" . "O .
ee fi
. '7.. SL: .. ...
, .a "' '"". " ..... . p ' '. ....
- °;AA",'
1/4 .... n',.t i:,
- <-Q*" ;*; P, r.=*/>
-I 0 - , ,I i5, f, - O-- - -- ------------ , .OI.- -
4'7
.. , -, . ", 1 . - O'
-a-----
!IIIuMoa 44. -- "------ "-" - -'9 S-- .a a
"---- -------r .. -- . ---
. in.
no:::::::::::::: :::::::::::::::::::::::::::::::::m:::::::::::::
-- L----
~~~~~~~~~~~---------- -----------
--------- I--I-----
- I-
'I . .-. --
I" n.I
,.N OT
--4--
g O'
~
S... .............. *.............. t ............. .............. 1 ........................... O'
- . t- - -". 'm S. .-.... .... ... 1
. * + .r": ..*, ..----
I --- - - - '- --- . - - V9'. - - - - - - --- ' F fr3.- -- - -
.5 4
-I , ,- -.. -------- '----- ...- g 6 /
Li, St
.S. .W* , I *. . .*I , ' /
45
. . -- -- - -- - - -- - - J -----.. " --*'" --, -----
V
-----""7 ,--------------------- - ". ---
- I--------
---- ". * -"o I'I, I" :-- '
*4'4 "C--- --- ----- : ------ -------------- ------------------ S:,' .,,
. , . . , ------------- .* ., ; - * . '-',.,,---- ,..9.* 7.: ,. , 7. :,----,,-.--,--,- ..-.... . ,.
j-- "" " ------- ---- ----- ------- --------- e
------- , - --- ----- elg- J----,.-------,,--**
l-ZO: ------- --- .. ,., * :'-.-" ----- --- --- I,
---------- I------- 7.. ---------- ------
..--- ,.-- ,,-.-'---- ------------- --------- 41
'--I
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCm:rnrInF Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-100-09
-PQNO.: P0-100-I, 54-PQ-100-2, 3,4 and 5 A Reactor Head Penetration AMTIOM, AMP Ultrasonic Examination Rata Sheet Customer: M.MC Plant: Po,,,,# Be,,., Unit:
Penetration No.:*, Procedure: *q-/15-,/a-*o Equipment: Description VH# Cal. Due Date SN# 4Tomoscan z-/7aZ =o31: " 16 Channel P/R N/,1 ACCUSONEX "Data Acquisition Software: Version 6.2.5 ACCUSONEXM Data Analysis Software: Version 3.9 0 Cable Len th: 60 Type: IZ6 -,-"-A # Intermediate Connectors: I
,Calibration Block: "///I E Calibration Setup:
Scan File No.: 22.s- c 3-. 8 / - Initial Calibration File: 4 :-'_/. 2:.-, Final Calibration File: ;22 4 - o. 'j -.7 Scan Start: Z =" .* Y?" Scan Start:' = -J" Scan Stop: Z = 1.7/Scan Stop: 0 Index Increment: 3° Channehl An e Serial No. Comments 6' "35,DW 3111.1-1 3 - zZ . -oF D 3 e,s0 350io 5" (p , o'5 3 *o,¢ 075- 3!F02-F Results: No Recordable Indications Leak Path Detected I. Axial Flaws Detected Circumferential Flaws Detected Comments: V..AT7 AnalRed by: 9 Level: Date: - q. -"2. Reviewed by: Level: Date: Iz,. q. 67..
>7 TYPICAL DATA SHEET FIGURE 5 @)911LAlD -2 Page 31 of 32
0 A CRDM Nozzle Ultrasonic Examination Data Sheet FRAAMATOME ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 9 Procedure: 54-ISI-100-09 INozzle Dimensions: (1s.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (de9".): 130 End of Noz. (in.): 0.91 Probe Serial No.'s: Ch l 35044 Ch 6 35052
,lc . ,Sta Stop:_ '"," d .. __t_,_- Ch2 35202 Ch7 - n/a Ch3 35070 Ch8 n/a Circ. Scan Start: J-5deg @1 0.47 I" Stop:I 365 Ideg @L 11.911" Stop: Ch4 35044 Ch9 n/a Files: A226505.08.12 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI- -..
2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 Data Loc. 130 160 .190 220 250 280 310 340 10 40 70 100 130 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.91 0.91 10.91 0.91 0.91. 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 Inches MAX. 3 62 3 93 4.17 4.58 4 62 4.86 4.78 4 56 4 09 4.09 3.82 3 66 3 62 Inches MIN. 2 84 2.99 3.19 3 57 3.76 3 80 3 68 3 47 3.11 2.84 2 84 2.72 2 84 Inches Cmet:Maue Thic'kness: 10.64 1 @theta of 150 deg with an axial position of 6.7 Limited Scan? (YIN): N Analyzed by: OZ6__-= tý2 *_ Date: V,/
, - 07... Analyzed by: AJ/,,? Date:
9/221028:43 AM Nozzle 9 Page i of 2
Z1 Z 968d '200r7'/l Q I. JL-43 6 91ZZON ZOIZEI6V'JV g9.8
------------------- .................... ------------------- ....... X........... ------------------ 0L
---- : -------------- .................... ------------------- ------------------- ------------------ ------------------ 9'L
------------------- .............. ------------------- .................... ------------------ ------------------- -9*9
------------------- ------------------- I------------------- ------------------ ------------------ ------------------- 0*60
---- t- --- 4s> -----
.-......b--------------
-T6 sot I-'. 1.' . 4
---------- 7-------- I I------------
T
%9*Ttt I ,
1, _ ,
--------------7-7
........... ------ .......... I---------
7---
-O *61
-- --- ---- - - - SIG61
.......... .. 7------------ ----- .. . . .. j
-Oon
- II I I Ai.9IZZON- B ;';,~.22 > :*w YIpj~%.~ vs~6vvs
CuZC .. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEfltRF L-A1. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-1 00-09 I PQ NO.: PQ-I00-1, 54-PQ-100-2, 3, 4 and 5 I 1kReactor Head Penetration FRA-, V5,MZ AMP Ultrasonic Examination Data Sheet Customer: NMC_ Plant: J~e--l F3 Unit: Penetration No.: )0 Procedure: 5q- is,- 0j Equipment: Description VH# Cal. Due Date SN# LTomoscan ""/./o3 -2.-oz. 16 Channel P/R NA NAI -I1A ACCUSONEX'm Data Acquisition Software: Version 6'.2.5 ACCUSONEX Data Analysis Software: Version 2 7-. 8' ,, Cable Length: Got Type: Ze.- t-4-q # Intermediate Connectors: I ICalibration Block: &o/)q.30o6 Calibration Setup: Scan File No.:. " jy'?., I Initial Calibration File: 1,)26e 2./S/ Final Calibration File:c,.rAJb PRnp,,c
- 7. 7.T.'I Scan Start: Z = r-.7 Scan Start: e= -ro° Scan Stop: Z = 7.r'2 Scan Stop: 0 = 2,cr" Index Increment: 30 Channdl Angle Serial No. . Comments I 5o°* $ oS£IC(.
Results: oRcordable Indications Leak Path Detected iaT Flaws Detected Circumferential Flaws Detected Comments: Analyzedby: ,...... Level: Date: ý7,,.-o0-2-. Reviewed by: Level: -Date: 'o ". 7-
'e2ýTYPICAL DATA SHEET FIGURE 5 tA OcA' Page 31 of 32
m, A CROM Nozzle Ultrasonic Fxamin~tinn 1l*f* R~hnn MAArn KA A .d Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: -10 Procedure: 54-1SI-100-09 Nozzle Dimensions: (ha) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 37 End of Noz. (In.): 067 Probe Serial No.'s: Ch I S0381CN Ch 6 n/a Axial--' I e$ ...... ;., ,sSetutop,:,- Ch2 _ n/a Ch7 n/a
* .. ......... , *.. . .. . . . , h3 n/a Ch8 n/a Circ. Scan Start:'l deg @L-0j" Stop:I 365 lde @1 7.57j Setup: Ch4 n/a Ch9 n/a Files: A226719.31.33 Cal Block SIN: 60119300 - Ch s n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max I NRI _,
2 _, 4 6 7 10 12 13 14 16 17 Data Loc. 37 67 97 127 157 187 217 247 277 307 337 7 37 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 Inches MAX. 3 69 3 88 4.25 4 64 5.19 5.62 5.77 5.77 5.41 4.91 4.44 3.89 3 69 Inches MIN. 1.94 2.17 2.49 3.01 3.46 3.97 4.33 4.25 3.78 328 2 64 2.21 1.94 Inches Comments: Measured Thickness: 063 ( theta of 185 deg with an axial position of 2.72 Limited Scan? (YIN): N I Analyzed by: Date: Analyzed by: tIP7A Date: I 9-2 J.dL 9/25/029 05 AM Noz 10 Page 1 of 2
I ZJo Z aBed SIJe840M ZON Z0/9Z/61A'V V0:6 uoqleoaewap IllqUMoQ] / IILdRw 9L-L- L-9 £ ,,-,-
'3'
.3 . 3'44
.3 3 N
- U4 4 .3 A
- 3O- 0W.. 3333
,s ','3'"3 3' 'U o'o o'3/4 3'.'
A
*'.j* -*.o ~t. - ' *,, I - - - -- -- ----- -- -----
3-='"3
.. 4 - --- '.--
- -~i?3.'4
-, --- -(3-
- ,3--
3 .
- ---- 3/4-. r-' 4- .-
3 g'O IlUMCoO - - - - - ----------- . 3 OT
-.. . . . .:. . . . . . . . :. . .t. . . . . . . * .. . .. . . ... : . '. .
ST,
~hp. '.ammm.-.... l...... O'P,
=:-,-Z--*-- _."n........
S 4....- wt....... wpn u un un pw nmuhg;m wunn n~
..... .. ......arer g's
-4,;" S'.", """ 0"9 g99 3.- ---- ------------- --- - -
E'L "tr...3 <,3 ,.-. -,3 9's
-- - ----- -' -----.-- --- - 0'6 T6
--.--------------- "----.. I......
-- .I-,-----
,-,- .......--....-.---.- ------ ---------- /- --------- -- ---- w------ -,--. -----..... ------.---
---------------------------- :* , -- ".- -'--" ----- . ... "-* "--,------ ,W .--------- . .. ,,-,,--..
--
- g'ot
"----"----"" /,--------------.------- ------
----- -w-,----,--- O'U
-. ----- ,*, I------------------
,,--,----,*. I -------- wN -----------
, - .- 'V----------------',, *
" ---------------- ',,*.w, *
-------------- .' ; -.. °-'------------------------* .
o'kk O'Ct'
. " . * .. .---- ,'= ".
--------- . *,*...o ,'I
- w.**
" -- ... -------- :,l Wet
'sCk' 0"W
;'*kt N -
Cg 9C.. FRAMATOME.ANP f~A1iY( NONDESTRUCTIVE EXAMINATION PROCEDURE " . - Remote Ultrasonic Examination Of Reactor Head, Penetrations PROCEDURE NO.: 54-fSI-100- 9 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration FRAMATaME ANtP Ultrasonic Examination Data Sheet Customer: WM r- Plant: o #-,
, ej.-. Unit:
Penetration No.: !Procedure: 5j- IS/-,1oO--'* Equipment: Description VH# Cal. Due Date SN#
.Tomoscan *11, q "1/-/03 22 q 16 Channel P/R N/A NA '-'1A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version .3.'51y. .
Cable Length: Sot Type: k,z.-qI # Intermediate Connectors: Calibration Block: *4o/1,q3oe/7 Calibration Setup: Scan File No.:/*2f.20- .S.e */4 q Initial Calibration File:,.25%c*.,/.2. Final Calibration File: ca..rijvco *r Fot'*J r Scan Start: Z = -.. ' Scan Start: . 5 Scan Stop: Z = 1.61,"Scan Stop: e = 3W" Index Increment: 30 ChannM Angle Serial No. Comments I 0 l 5os. cJJ
/
Results: (lb-_ecordable IndicationsE3' Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: J.d Level: .17 Date: /- .o -1Reviewed by - Level: .'Date:
)TYPICAL DATA SHEET FIGURE 5 tlsý-p ojýzc-Q'z Page 31 of 32
FpAMATOME ANP CRDM Nozzle Ultrannin Fvmin2finn fl2*a kf Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 11 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in4 ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.j: 0 End of Noz. (in.): 0.59 Probe Serial No.'s: Ch 1 S0379CN Ch 6 n/a
~~d ____ ý i; C n/a C7n/a WW T- 4Ch fly/a ChB Circ. Scan Start:L -5.deg @ -0.7 Stop:[ 365 Ideg @J fl/a
" 8 161' Setup: 3 Ch4 n/a Ch9 n/a Files: A2269_01.06 25/A2269_05.24.18 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI
-3 - -----
4 6 7 4 8 _ 9 10 12 13 14 15 16 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 Inches MAX. 4.94 5.37 5.89 6 54 7.14 7.55 7.61 563 5.15 4.57 4.10 3.75 4.94 Inches MIN. 2.13 2.50 3.39 4.36 5.20 5.79 5.89 4.19 3.73 2.89 2.11 1.67 2.13 Inches Comments: Measured Thickness: 067 1 theta of 2551 deg with an axial position of 635 Limited Scan? (YIN): N Analyzed by: Date: 9. -7e- ,. Analyzed by: #j /A4 Date: - 9/26/20026:38 AM Noz 11 Page I of 2
6:12 AM9/26/2002 Noz 11 Chart 1 Page-2 of 2 CNZ. FRAMATOME-ANP NOMNDFRTRI It'ThIFI IFYA£1UllW* d DD* b'nn r I=II NONDESTRUCTIVE ;:yAAAJKA'MnK' n0ee'cr%"n= Remote Ultrasonic Examination Of Reactor Hiad Penetrations PROCEDURE NO.: 54-ISi-100-09g N I N.: PQ100-154-PC-I100-2. 3.4 *nd_/ PQ P N "A "Reactor Head Penetration FRAMAOME AUltrasonic Examination Data Sheet Customer: W4 me-. Plant: P,#-- 1 ki Unit: 5em_. Penetration No.: Procedure: 51- 15i- .oo-* EI Equipment: Description VH# Cal. Due Date SN# gTomoscan "11-/13 2ozzq 16 Channel P/R N/A N/ ACCUSONEXj Data Acquisition Software: Version 6'2.5 ACCUSONEXm Data Analysis Software: Version.3--5 .. Cable Length: O' Type: k>&- 1-4-q # Intermediate Connectors:
.Calibration Block: ",ol/1473o el Calibration Setup:
Scan File No.: ., ; 22C, 7_.-t. 22"0, y Initial Calibration File:,2,(*./f.
- 4'.,
19- -.2.4 o -y. 7.j5 Final Calibration File:cofi-,6,.itA,0 r Scan Start: Z = -,' Scan Start: 0= " Scan Stop: Z = 7.57 Scan Stop: 0 = Index Increment: 30 Channe Angle Serial No. Comments Results: -- ordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: Date: - Reviewed by : Level: Date: /O,' e*ý TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 12 Procedure: 54-ISI-100-09 jNozzle Dimensions: (ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg:): 0 End of NozL (In.): 0.51 Probe Serial No.'s: Ch i S0420CN Ch 6 n/a Axal,.Scan*,* Stit -- _:_ de_ , Stop: , Ide§g 1@.
" Setup:Ir , Ch2 Ch7 n/a Qjle. 4 AT,~ ~ i Ch3 n/a Chl8 n/a Circ. Scan Start:I -5jdeg @1 -0.7 Stop:I 365 _deg @1 _7.5I' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267 01.50.241A2267 02.23.35 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 nl/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (dog.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI 3
4 5 6 7 ; 8 10 11 12 13 14 15 16 Data Loc. 0 '30 .... 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD N oz. Loc. 0 30 60 90 120 1150 180 210 240 270 300 -330 360 Degrees PROFILE N oz. End 0.51 0.51 10.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 Inches MAX. 3.08 3 25 3 57 4.12 4 60 5.03 5.15 5.13 4.81 4 29 3.72 3 30 3 08 Inches
]MIN. 1.191 1.31 1.65 2.33 3.32 3.76 4.16 3 89 3.46 2.1 1.71 1.31 1.19 Inches Comments: Measured Thcknes's=: 0 63 @ theta of 202 dea with an axial position of 6 22 Limited Scan'? (YIN): N Analyzed by: tr= jDate:, 9-;2.r -0 2 .-- .... Analyzed by: A( A Date:
7 ~~ ( O-0 Z,%(- uz-Noz 12 Page I of 2 9/24/028.35 AM
z Jo z 968d , ieqO ZL ZON ZOlIIZ/6VV g£:8 II*.,,?.
- I
.:........ .:_.. . 2... 90"*
- ---- --- ----------- ----------- S......:...........
- I
-A. '5 O'V "5A "S`
----------------- k-. I , --------- --
----------- ..... ------------------ * - .5 . 4' ---------
----------L ------
'Vol 9O's mnseomm
'kunneumak~~~~~~~k~~Wiin~~~i unaunf ~ ..... .ii~u ...... -~ -n --wnu -e
-e~
--ui-am
-u-e-te
-n-
-- ====- ====== ====.==-=-=-
------------- z ....
-- Ii 9.'
0"9 9.9
--------------- :__ ----------------- ----------------- k-- - - - - -- - - -- - - - - --.
I-.................
---------------- ---- tv ---------- 0*L
----------------- .................. ----------------- I................. I I-.................
097 I- -.. --.. ---------.
,I................
O's I-.................
,I........... .....
Ts 4 ................. 0'6
..................t__.
--------------- ----------------- ----------------- I----------------
------------------ ------------------ i.. ................
9.'Oi,
-'-a "----/" - --- " .--- . * :/-----
"'.I :'/ , : , -' - "-0------"
I"4,. 5j55.A. A"5 4A
-A 5' --
4 , . '4 , , ','i" -I, .." ,* A-s -
'~0It
, ' . . ,. . -A ' .,--- b I, ' .:-,.rlirw.....
ts 1 : . dN *p'O..r /*-'. fl ¶- ,- '
,r .,s ,',.
"T' R'- 77QR7k YT
Cl..C FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE " . Remote Ultrasonic Examination Of Reactor Hiad Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ -100-*i, 54-PQ-100-2,-3, 4 and 5
! t 1Reactor Head Penetration FR'AATO"MEAMP Ultrasonic Examination Data Sheet Customer: WMWC. Plant: c,-- !3e.c- Unit:
Penetration No.: 19 Procedure: 5q- IS- .o0"D'i Equipment: Description VH# Cal. Due Date SN# tTomoscan " ""/L/cI z-zZq 16 Channel P/R N/A N A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX" Data Analysis Software: Version q93 . Cable Length: go I Type: Ze.- t-- # Intermediate Connectors:
.Palibration Block: &,o/j93o06 Calibration Setup:
Scan File No.: At22.-.?3, Initial Calibration File: i9 24_irK29.9 5/ 4 Z627.67 oo. -3." Final Calibration File:CoA 0 r~yuco prxre"A*,'u Scan Start: Z - .7 "Scan Start: 6= -- " Scan Stop: Z = .777Scan Stop: 6e= j Index Increment: 30 Channel Angle Serial No. Comments Results: lecordable Indications Leak Path Detected Axial Flaws D--ecleo Circumferential Flaws Detected Comments: Analyzed by:) Level: V f Date: /0-2_7-0-* Reviewed by: , Level: .'-Date: /'/°-
/TYPICAL DATA SHEET 60 ,-,
FIGURE 5 (c Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 13 Procedure: 54-ISI-100-09 Nozzle Dimensions: (Ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 23 End of Noz. (in.): 0.2 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a A'tial , , .. S , Ie@.. I St I- ;"StP - Ch2 nla Ch7 n/a Circ. Scan Start:[ -5deg @ -0.7 " Stop:
~t ~ ~ ~-Ch 3 n/a Ch8 n/a 365 Ideg @1 7.781' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_00.03.01/A2267_00.39.15 Cal Block SIN: 60119300 ChS n/a ChIO n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI .....
2
- 3 4
6 7 , 8 10 12 13 14 16 Anlye _ _: -T _ _1 _ __- 17 Data Loc. 23 53 83 113 143 173 203 233 263 293 323 353 23 Degrees WELD Noz. Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.20 0.20 10.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Inches MAX. 3.11 3.37 13.73 4 29 4.87 5.13 5.19 5.09 4.77 4.27 3.77 3 33 3.11 Inches MIN. 1.46 1.71 1 227 12.85 3.55 3.95 14.21 4.03 13 47 2.63 1.86 1.54 1.46 lInches
;Comments: Measured Tickness:1 0 64 1 theta of 23.66 deil with an axial position of 14.311 Limited Scan? (Y/N):1 N I l zne A y v , , ,.k
- _ý'* . Da te : 1 - Z I9* - o ? - . ...Ana ly z e d b y : */ D a te :
/ ULsAV 0 .91. Z.o 1M 9/24/028:35 AM Noz 13 Parge I of 2
' F~RAM TMI ANF3, N -- 1- 13 P-'1.
*. 15.0 -' :-" ": - -- -- - - - -- . ... -
... 4%C .
- ---- *1*
13.5. --------- 1' 13.0 -- ----------- "1 12.5 --- - - -- - - - -- - ----------------- ----------------- ----------- "---------7 - -- - - -- -
, .4.
--------- .................. --- - -- - r- -- -
I .. . . .. . . . .. . . ----------------- ----------------- ------ - --- ---- -- -' - - - - - - - 11.0 -- - - -- - - - -- - - -- - ----------------- ----------------- ----------------- - -- -Ž . - V. .,P. 10.0 ---- -- - - -I--- --- - - 9.5 4------------- I------------- I----------------- I--------- --------- ii- --- - -- - 9.0 ----------------- ---------------- ----------------- 8.5 ----------------- ---------------- ----------------- ----------------- 8.0 ----------------- ---------------- ------------------ ----------------- 7.5 ----------------- ---------------- ------- . ......... 7.0 ----------------- ------------ ---------------- 6.5 ----------------- ---------------- ---7------------ ---------------- ----------------- 6.0 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- -----------------
- if--
5.5 ----------------- ----------------- ----------------- ---------------- ----------------- ----------------- ----------------- - -- 5.0 ----------------- ---------------- ------------------ ------------------ 4.5 -------- i--------- ----------------- ----------------- ----- - - - - -1 -- 4.0 to-M n-inaMaurt!4 -- ------------m~~~w i4" UmmIiua um 6 3.5 ----------- 3.0 ... - ...
--------------- ---------------- Dbo.nhfll
.2.5, -- -- - -- - --
---------------- -------I----- 7- . .4
.2.0. --------- --
1.5 -. ----------------- --------- I** (.1 V . 0.0'- '1 ')47 2I , , I I , , ,, ý;' 15 0 2 00 2 .5
-2 -3 -4
-6 -7 -8 10 - 11 -- 12
. - ---- 14 -15 --- 16 mn5wUphill I Downhill demarcation 8:35 AM9/24/02NolhatPge2f2 Noz 13 Chart 1 Page 2 of 2
* -. . *V, CiC I--
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head'Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Pt Reactor Head Penetration FRAMA*aMI A Ultrasonic Examination Data Sheet Customer: M )C, Plant: i,_.- B,- Unit: Penetration No.: 1N Procedure: 5q- Is/I- jO- 011" Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " ",/7/o. 16 Channel P/R N /A N 1A A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX M Data Analysis Software: Version 3-'ý2 s.5, Cable Length: IO' Type: 2&- -4q # Intermediate Connectors: I
.Calibration Block: &oio//q3oi Calibration Setup:
Scan File No.:. A Zzc,- o,,- ..- Initial Calibration File: A
-. *o.0Z2 I Final Calibration File: A16u: , 7.3 Scan Start: Z = q0"Scan Start: 0 = -* Scan Stop: Z = '7-41" Scan Stop: 0 =L,"
Index Increment: 30 iki ChanneI Angle I Serial No. I 501j. 15*oIZo C.M Comments
/
Results: (11-o Recordable Indications) Leak Path Detected Axial Faws etected Circumferential Flaws Detected Comments: Analyzed bY: Level: Date: qs't'f2
-Reviewed by: , . Level: -7*
Date: l- o.;z_ TYPICAL DATA SHEET FIGURE 5 Pace 31 of 32
PRAMAT(3tI" ANM CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - Nozzle: 14 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iia) ID: 2.750 OD: 4.000 Thickness: 0.625 Ch2 /3h l Downhill Side of Nozzle (deg.): 96 End of Noz. (in.): l- , "*" p Pd 0.26 l** '
*; "",,.-,,- *Y* S Probe 1". tu l Serial
"' .0,,*
No.'s: Ch I S0420CN Ch 6 n/a ItI M't~-- l ;g"*t
, S. ,*'n. .*N:'?,.-*, I F11 _____ d_____
"~ - ________ q,,,~i Ch2 n/a Ch7 n/a Fils ~ % ~,~4~f ~ ~~ : /£ 'Ih n/a ChB n/a Circ. Scan Start:I -51deg @1-0.7_ " Stop:I 365 Ideg @1 7.9f' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_09 59.52, _11.05.05,11.10.59, _11.42.02 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to MIn Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI _____
3 4 5 6 ; 7 8 9 10 11 12 13 14 is 16 6 36 66 96 Degrees 216 246 276 306 336 330 360 Deglrees 96 126 156 60 86 190 120 150 180 210 240 270 3-00 1WELD Data Noz. Loc. 0 30 0.26 0.26 0.26 TInches 0.26 0.26 0.26 0.26 10 .26 0 .26 0.26 0.26 3 22 Inches PROFILE Noz. End 0.26 0.26 5 42 5.00 4.38 3.78 3'43 3.82 A4.43 5.10 5 61 5 66 1.71 Inches MAX. 3.22 3.38 4.33 3.73 2.76 2.27 1.99 2.39 3 00 3.75 4.50 4.70 Limited Scan? (YIN): n MIN. 1.71 1.83 120 ,de gl with an axial position of 4.32 , Measured Thickness: 0 ,6 - t h* taof Comments: W/ ' Date: Date: 9 12 7 g
-/', Analyzed by:
Analyzed by: -L 7'j (. 9/24/022:37 PM Nozz 14 Page 1 of 2
Z1 Zo9e68d -" LýI1E4OI7LZZON ?QIV7ZI6V'I zc:z 00t
- S.D.
- 79
-----W UUMIUV WWN 11UU.11 1, UW nuuwwnMri.iMrmuusmm n 1d~n~mnunn ~ gfiuuuauu amnuanwnu
*----------------------- ----------------- I 0 *9
-- ------ I-------- -{ ----
----------------- ----------------- ----------------- ---------------- ---------------- 0*
9
--- -- ---s';
- - - (4
------------------ ------------ ----------------- ---------------- ---------------- *G96 ok O*
-- - -- 4-- --------------- ý,,
----------------- ----------------- ---------------- ---------------- 0',.--- - --
----- -- 4
-- - - --- - OW 4-- --. -
- z. r---- -
- -- ,- -- xx94t
------------------ ----------------- -----------------: ---------- ......
- 4;;'*-
--- - -Po~z.
-:nt
---------------- --t -----7-- 4--- ----7 ---
--7 II
- .9*C
---------- -- 1/4-
-,------------- ~~--' NV I
SWQIVINWtdW 0
'I,
*?~Y!¶V?ý'
2-i
.--. ,.jI; ZMVZ {: rN' .4
- 24
* - - I A
FRAMATOME-ANP NONDESTRUCTfViF IYAM!MA*Twtl nr1*tr=*r* Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09
, P0 NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 A Reactor Head Penetration zA*,A*t A*=P Ultrasonic Examination Data Sheet Customer: W MrC. , Plant: p.,-/-- Iec.* Unit:
Penetration No.: -Z-4 A5 Procedure: 5q- 15/- ioO"-6e Equipment: Description VH# Cal. Due Date SN#
.Tomoscan " 1,/'/o. 2..ozq 16 Channel P/R N/A NAI, ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version3-4 -s.5 Cable Length: SCO Type: Ze.- 1-4-q # Intermediate Connectors:
4alibration Block: (o/Jq3oe/ Calibration Setup: Scan File No.:. A zv._ -o.(t.I I Initial Calibration File:.r oZ.,o.'( A M*,.,'I-. e'*-
- Final Calibration File: c nm.wro ,=eurnf r 7.7-3-.4 Scan Start: Z = -o.1, Scan Start: 9 = -* ' Scan Stop: Z = .. ol1.O Scan Stop: 0 =3*"
Index Increment: 30 4 Channe
/
Anale 5"0 ° Serial No. 5oc..lG p.( Comments Results.
- r) Recnrriable Indicatlon* Leak Path Detected "Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: ' Date: Reviewed by: ,, - Level: -- j- Date: /'.,/' 2-.
/
TYPICAL DATA SHEET FIGURE 5 foloz, Page 31 of 32
"A CRDM Nozzle Ultrasonic Examination Data Sheet PRAIAATOMS ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: -15 Procedure: 54-ISI-100-09 INozzle Dimensions: (im) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg*): 289 End of Noz. (in.): 0.37 Probe Serial No.'s: Ch I S0416CN Ch 6 n/a topI 'Ž'~ de~i~,~ 'U Pi2 n/a Ch7 n/a r~ ~ ("* -. ~Ch3n/a Chi8n/
Circ. Scan Start:j -5deg @ -0.7 ,, Stop: 365 Ideg @1 7.0&801' Setup: 3 Ch4 n/a Ch9 n/a Files: A2268_10.15.41/10.51.38/11.30.50/11.43.10 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angie TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) '_ (in.) (deg.)
--- (In.) Ratio Orientation_ Min Max I NRI - -- _ _ -3 -4 -5 -6 _ -7 10 11 12 13 14 3nlye 16 by:___ 9__ A Date:
17 169 199 229 259 289 Degrees 349 19 49 79 109 139 Data Loc. 289 319 300 330 360 Degirees 150 180 1210 240 270 0 30 60 90 120 0.37 0.37 Inches WELD Noz. Loc. 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 10.37 0.37 0.37 Inches PROFILE Noz. End 5 80 5.65 5.33 4.82 4.28 3.64 3 21 3 21 3.17 3 64 4.22 4 82 5.33 1.50 Inches MAX. 4.28 4.20 3 83 3.04 2.21 1.76 1.67 11.93 2.08 3 04 3.60 N MIN. 11.50 248 degl with an axial position of 6 03 Limited Sc'ant (YIN): Comments: Measured Thickness: 10.631 1 theta of
... Analyzed by: /Dae
(*Date: /..
-'*....by Anayze 9/25/027:49 PM Nozz 15 Page I of 2
-C It; 22 >2 FRAMATO-ME ANP
'~ 4¶t%~j~ $
'.4 : ~'-
4
~
40 r I r 14. --------------- ------------------ 14.0,4 ------------ 4 13.5 "--- - - - -- ----------- ------- 44 4 ,ý," . 44Y4444 13.0",'-' a - -- - -- -- - --- -- -- - -------------------
---------- 7 -------
------------------- 44- -r ' -- ' ------- z 4 4 4 12.5 4 4--- -- -- - -- --
----------------- , , ., _., I 12.0~ ------- ---- 7-4 11 5 ,1 _ ---------- 7--
11.0' 4.444444444k-- ------------------ ------------------- - - - - - - - - - -4L
- - - - - - - - - - - - '-t---t-.
10.5 ------------------ ------------------- 10.0 ------------------ ---------- -- --------
- -- -- - -- - -- -- - -- -- - -- - 4-54---'--4----------
9.5 -------------- U,--------- ------------------ -------------------
------------\ý_
9.0 ------------------ ------------------- 4 4- 4 ------ 4----4 4 8.5 ------------------ ------------------- ------------------- 0, 0 8.0 ------------------- -------------------
'C U 7.5 ------------------ ------------------- -------------------
C 7.0 ------------------ ------------------- ------------------- 6.5 ------------------ ------------------- ------------------- I 6.0 ------------------ ------------------- -------------------- 5.5 5.0 ------------------- 777ýýý 4.5 M 4W4WR4Mnt4fl4444i4444 f 54flC4i4M4WPUWflfl44nUI I 0*flUU4WNiSSUShiU4 AdSM$UWduuuuunnmauu. Li iemuua4mun4erneuaevau, I. I.ntAuid.4dh44i44.4.ahddUd.444. A- uie.see.nee .... ARon I Iffi'momm gm&m 4.0 3.5-4 4--- -- -- - 7:7777___;<
----------------- --------------I----- 4 4 44 3.0 ----4 4--- -
4 --- 44-- 7 ----------- 7 '444444 Downhill 2.5 4 4 4 4 4 - - - - 2.0 - 44 4 4 44 4 4 - - ------------
-------------- 7----- Sldez 1.5 4 4 -- --
4--
- - - 4 4 4- - - - - 4-- - - -
.................... 4 4. 4444$
'.4(44.
10 4 - -- ----- '-- 44444444444444444444444444444444444444--'+--'- A
-- 4----- -------4--------.;A 46..
V 0.0 4 4 1 44 4.4. 00 4"~ ' 1'50 -k 00 5.
- egr -300
- e-<.
-2 -3 -4
-6 -7 -8
-10 -12
-13 --- 14 -15 -- 16
-§i Noz. End ~1 N""a"01Uphill / Downhill demarcation 7:49 PM9125102 Nozz15 ChartlI Page 2 of 2 1%
9C.. FRAMATOME-ANP NOND2STRUCTIVI* FXAMllATnt'lJ I=trtl I Remote Ultrasonic Examination Of Reactor Head Penetrations IR PROCEDURE PQ NO.: PQ-100-1, NO.: 54-ISI-100-09 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration rRA.MAT.CME AMP Ultrasonic Examination Data Sheet Customer: W M C. Plant: - Sek Unit: Penetration No.: /ICI Procedure: 59- lS/- 'oO-0'j Equipment: Description VH# Cal. Due Date SN# gTomoscan I I /-/03 16 Channel P/R N A NIA 1/,A ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Versionq3*< 53. Cable Length: - Calibration Block: Scan File so.: A.- A6 90' 0/19q30'/ 8, b.oo. Type: .2.- i-4-q # Intermediate Connectors: Calibration Setup: Initial Calibration File: Az24.8-.o'At. I I Final Calibration File: , pRz.pawm, Scan Start: Z-. Scan Start: = -5 Scan Stop: Z = 7%.? Scan Stop: = 3L.S* Index Increment: 30 Channe Angle Serial No. Comments
/
Results: (!ýo Recordable indication-s Leak Path Detected Axial Fla-ws 0e ec ed
- Circumferential Flaws Detected Comments:
o-[" Aoz/e e. ,,,, ,,W44L Su. 4 C. Analyzed b,: Level: 7Z7 Date: '! Z*0 Reviewed by: -. eve!: 7 -.-Date: 1612 oZ._ TYPICAL DATA SHEET FIGURE 5
/L\24 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: 16 Procedure: 54-1S1-100-09 Nozzle Dimensions: (io) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 330 End of NoL.( In.): 0.64 Probe Serial No.'s: Ch i S0416CN Ch 6 n/a
!~~;~~§I~I I~I~t~: ~ d~; C2n/a Ch7 -n/a Circ. Scan Start: J-5deg @1 -0.7 " Stop:l 365 Ideg @l 7.97(' Setup: 3 Ch4 n/a Oh9 n/a Files: A2268_08.00.05. A2268_ oS,.SI.53 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (In.) (deg.) (deg.) (In.) (In.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 23 ,,__
4 5 6 7 9 10 11 12 13 14 16 17 Data Loc. 330 360 30 60 90 120 150 180 210 240 270 300 330 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 Inches MAX. 2.96 2.92 3.43 400 4.77 5.24 5.48 5.42 5.17 4.61 396 332 296 Inches MIN. 1.35 1.29 1.64 2.09 3.18 3.79 4.17 4.12 3.72 300 200 1.42 1.35 Inches Comments: Measured ThIckness: 0.62 @ theta of 34 degtwith an axial position of 4.84 Limited Scan? (YIN): n Penphery nozzle. Distance to end of nozzle is 0.58" downhill side. Nozzle also has chamfer on ID surface. Analyzed by: *Date: I 2 !z. Analyzed by: Date: 9/2510211:52 AM Nozz 16 P;ige I of 2 j
i%4;4-jI * '5t1.t.s,
-, - ~ ',Vi,. 't ' . ' .,.
4.0 . ' "a. ,'A . ",, ,+ff<',::-' . I.w% ',=
.,..FRAMA'OMEANP 2("~,
A.'.'.) - :; ' Q , ,-' N.l1
,. Profile' ' . .
.,_,------- ,,,-,-, ; .--... ---- --- . . ...... 1-
..I --- - -- ."*,
1 244-
.5 °, ..- - .. - 4. -4 r. ' - -
- if',
.4
-........... r . '-,
12.0'1,, I - - - - - - - - - - 'V.
'120 -------- ---
1 1.5 -- - - -- - - - -- --'--- -- - --- - - - - - - - - - - - - - - -- - - - - - - - - - - - -- - - 111.0 ----------------------..------------------- ------------------- ------------------------------------------------....... ........... 1 0 .5 -- ...------------------- --------------------... - -- --- --. *... ------... ----- 10.0 [. ... .... 9.5 Z Z Z Z Z Z Z Z Z ZZ :Z ZZ =:ZI...... 8.5 - -------------------. 7..5 ...................--- ..------------------- .---------------- .--- .-----------------------------------------------....... 7.0 .. . . . . . . . . . . . . . A
... --- .. --------------- I-----------
6.5 ------------------- .................- ---------- ,--................---................ ---................ -.--.......... 6.0 ------------------- -------------------- 5.5 5.0 4.5
---- -------------- - I -I - -LD MIIUNUVU i[dl I ME i ut u fm n sn n L nfleigeeef lheulnnf ig leirn iAI mnInlni.lrlm ml" I i. iis.
4.0 ----- 3.5 ------------------- ----------------- --- -- -a.. 3.0 .. .. . .4 . --------------- ---------------------- Downhill 2.5 ------------------- ------------ -- --- .......... 2.0,. -------------- --------- ------------------- ---- 1.5: 7-7-1 7----
------------------- ------------------- ;?',
ý. I *f l'.
----------- 1 ----------------------- - -- '9" 0.5 .. ; : 7... I 1 11 .
- 4 " 4, 002
",200i ' " 250':' 4
-2 -3 -4 5 -6 -7 6-8
-9 10 "-11 12 13 ---... .14 ,15 --- 16 inNoz-End -- 1 -- ,=IUW"Uphill / Downhill demarcation 11:52 AM9I25/02 Nozz 16 Chart I Page 2 of 2
.ri Cu~
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE I Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration FR- UAOME' AMP Ultrasonic Examination Data Sheet Customer: W MvC- Plant: 8.-
&eAr- Unit:
Penetration No.: /7 ' Procedure: 5q- ISI- .1O0-c Equipment: Description VH# Cal. Due Date SN# gTomoscan " "1/1 3 .o1q 16 Channel P/R NA Nt/.A/A ACCUSONEX Data Acquisition Software: Version 622.5 ACCUSONEX ""'DataAnalysis Software: Version* .7. 97,* Cable Length: 9' S Type: 2- t4-q # Intermediate Connectors: I Calibration Block: "(,o/ 193o67/ Calibration Setup:
'can File No.: .4 ,?2 b7-,-, 2.9 Initial Calibration File: +,Pvgq'-/- 1 ,,O*
19 *, 6"*-- 2. a-5o" Final Calibration File:L.zJu', ft-otsqgc 74 ,r.41, Scan Start: Z = -. 7 "Scan Start: 8 = ' Scan Stop: Z = ,79Scan Stop: 0= Index Increment: 30 Channe Angle Serial No. Comments
/ 5"°- e Al
/
Results: Ecordable Indicationn Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: lAnalyzed b~y: 6,7 ,40- Level:
- Date: 7-2-O1Z.
IReviewed by: Level: .. t~Date: / 9O TYPICAL DATA SHEET FIGURE 5 Lk dct-2$tc; Pace 31 of 32
0 A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOMM ANF* Customer: Nuclear Management Corporation Plant: Point Beach jUnit: 1 _ Nozzle: -17 Procedure: 54-ISI-100-09 Nozzle Dimensions: (ire) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg*): 330 End of Noz. (in.): 0.48 Probe Serial No.'s: Ch 1 S0381CN Ch 6 n/a xial n *%Sf*'>.J. tb:J... Ideg\@ .,i ,-";Setdp';,L.. Ch2 n/a Ch7 n/a AU,~ k Ch 3 n/a C118 n/a Circ. Scan Start:[ -5deg @L " Stop:l 365 Ideg @1 7.781 Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_20.00.29/A2267_20.25.05 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial uAdlsted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Mn Mi Max Max Total Mi Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (dog.) (in.) (in.) (deg.) (in.) Ratio Orientation Min I Max 1 NRI _ II_ 2 ___
-3 -4 -5 6
7 8 10 i 11I 12, 13 16' 17 240 2 7 0 i 3 00 3 30 Degrees' 90 12 ISO,0S 2 10 ata Loc. 330 3 0 30 60 330 360 Deglrees
'D 210 240 270 300 90 120 1' 9 Inches Noz. Loc. 0 30 60 0.48 0.48 0,48 0.48 WELD 04 0.48 0.48 0.48 0.8 10.48 0.48 0.4 8 1 .8 3 98 3 76 Inches PROFILE Noz. End 2 6.18 5 .88 5.24 4 61 39 4.11 4.68 5.31 59 2.16 1.7 9 In c he s MAX. 3.76 6 4 .68 4 .2 8 3 .43 2 67 2 .7 1 3 52 1 .4 N
,M IN. I 1.7 9 1 .910 w
alith an axial pos of ition 32 6 Lim ited Scan? (YIN ): 1 A-theta of 18 11 de Gom ents: nm Measured Th c n ss: 10 64 4' ae Date 9* OLOZ'/ Analyzed by: SAnalyzed by: " -7* U) 4 (:30- - W-9/251029:05 AM Noz 17 Page I of 2
Z JO1 abed ý JJE4Q L ZON ZO19E16V'JV 90:6 A4.. ~ ý,
*,JfA.'~ 00
". t; ," Aý., A
-------W.-6 I-,- ,+/-ntt Inanaunn n q u WMý q
,n
----------------- ýZýý
----------------- ------------------ .................. I .................
------------------ A-C
--A--- A:
A-- - - A - - - A-
----------------- t-r--------- ..................
` ,¶I A I
, .... . t I~
A~t A~?A
~th
-- - - - -- - - - ----------- 9 4,V A 9AT A
Oil
~
6
'i J
.... A
.. .... A .. ----------------- "m A' - - - -- - - umvmm O
. .. A....'...
--- AA-t--'-6'----' ----------------- '--------- I----------
A..
.. . A
-- - -- A '
---------- -- 6--*-
------------------ - A--------- ---------------- 'A AA6 5? A-A., 'A A lAt AAAAA,,j';
6, '
- AAj AA1 ,AA'AA UIA Ct A': A A"A 5
Ci L.. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE t Remote Ultrasonic Examination Of Reactor Head Penetrations P PROCEDURE NO.: 54-iSI-1 00-09 PQ NO.: PQ-i00-I, 54-PQ-1 LO-21 3,14 an~d 5 A Reactor Head Penetration PRI*AMATOMC AXP Ultrasonic Examination Data Sheet Customer: M IC. Plant: - 13e,,-. Unit: Penetration No.: "Procedure: 5'-/i1- oOD.-O'> Equipment: Description VH# Cal. Due Date SN# Tomoscan' I/1 11"10 2o-C,zozq 16 Channel P/R NNA NI I I1/A ACCUSONEX "' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version -. 7.'S , Cable Length: gol Type: Z&- 1 # Intermediate Connectors: I Calibration Block: d~o//q3o / Calibration Setup:
"tcanFile No.:. 4;7'2.;'7 /J7. 0B"S Initial Calibration File: S7:226.'-,
$'.OV/
Final Calibration File: co.-WVC' PZ-raMA . Scan Start: Z = -. 7 " Scan Start: = -,s Scan Stop: Z = ?F" Scan Stop: 0= Index Increment: 30 4t Channel
/
Angle 5"oL. Serial No. 0* .) C.*A.) Comments Results: REEF~e-cordable Indicat: Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: T Date: - y ,2 Reviewed by: Level: -Date: lo.q-02 7'" TYPICAL DATA SHEET FIGURE 5 LA CRSV2 51 0 Page 3I of 32
A FR AMATOM E ANPI CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: 18 Procedure: 54-1I1-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 142 End of Noz. (in.): 0.66 Probe Serial No.'s: Ch I S0381CN Ch 6 nla AkiahSca'rn- Wit, S' n/a Ch7 n/a Circ. Scan Start:[ deg @ 07"
.Th ~ ~~ Stop:I 365 Ideg ~ @1 7.76' ~
Setup:[3 ~ ch~3 Ch4 n/a n/a Ch 8na Ch9 n/a Files: A2267_18.17.08/A2267_18.56.20 Cal Block SIN: 60119300 - ChS n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI . . ." . 2 2 4 7I; 8 9 10 11 12 13 14 16
-V
-7 17Data _ Loc._ 142 _
172 202 _0 - j - 232 7 262 292 322 _352 22 52 82 112 142 DegreesI PROFILE
- _w _ _,,_ _
WEL Noz. Loc. Noz. End 0 0.6 30 0.6 60
,6 90
-__-o_.
0.66 066,66 __ 120 0.66 150 0.66066 180 0.66 210 0.66 240 0.66 270 0.66 300 330 360 Degrees I c e MAX. 3 41 3 63 4 04 4.59 5.22 5.73 5.94 5.83 5.33 4.76 14 09 13 61 3 41 Inches MIN. 1 68 1.77 2 05 2.75 3 63 4.24 4.63 4 46 3 63 2.93 12.27 11.73 1.68 Inches Comments: Measured Thickness: 0.63 @ theta of 305 deg with an axial position of 6 99 Limited Scan? (YIN): N Analyzed by: .,l_ 1*f _._Date: 7/"Z5- 0--. Analyzed by: ,aRDate: 9/25/029.04 AM Noz 18 Parle I of 2
,, " C'\
'1 .,; '+" + " .. +.,'"t* ;I ...."_. ..j..-
ANP"..... .. ....
-..... 4L':
-4t2' ""+ + ,
1' "44" Nozzle " 18 "+3/4"','"
.... Profle... , ., .',
, ',*+ -'" *
" + %
* , . ' Any 1*1
,.. ....... ........ ... .. '... .,.......... ..... ,.+.,.,. " .. .. .. 0 11 . -' " " - ,-1 ,- -.--------- --- .... .
A A.... S m - , - ' ., , 4. 13 "0.. 4 ...............-................
,--------*------------------- I..... ... .
125" 1--- '-- 1 1.0 .. . . . .. . . . . . . .. . . . .. 1. . .. . . . .. .1. .. . . . .. . .,... . . . .. . .- . . .. . . . . .. . . . .. .I' . . . . .. .'. t.. ".. S1d0,0 405 ..... WIWIU -,......... nu................. fStN................. i4...........N .. - UII................. .......... IHISUW Ia
...... m........... I ..........
a" 21.0 -i---- --- -- --- - ---- - --- - e 10.0 -...---------- ----------- ------------------------- .
-- ---- ----- 3 4-- -----
7--
*,* 1 . +, . +*+*: ,. 2 0owhildearato Uphill- --, - --- - : --1)-- .+S -
, -- '< --* * -, --3-(0- -- . :*-----------------
7
* --oz--End-
' 7.0
.5 N---- --- ---
. +.. ----------- -------------------------------------------------
f-- 16.5 200...J...250.* ....................... 3.......... 4
................... Downh- i 19.5 .....--- ----- ----- -P-age-2-of----2 - -.......-.- ---- -------- .-.------- -- . ..
"+ -- 4.5*,---- - - -4.5--- -- -- ---- -- ---2----- *4 4 *,
-------- -o------ ------- ----7 --
------7
- ~~~~~~~---
- 4. ---------
5----- --------
+-- 3-.. . ------ --.-----
' " p ll ow hl e act o ... .
i J *- --------- .. .. Page..of.
-M/ ----- --------- --
- -- 5
9C , FRAMATOME-ANP NONDESTRUCTIVE EXAMiNATION PROCEDURE Remote Ultrasonic Examination Of-Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 SPQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Ak Reactor Head Penetration F;ZAUA-T,.= A Ultrasonic Examination Data Sheet Customer: ", hi .. Plant: Io,-%- er,~k Unit: Penetration No.: t9 Procedure: 5'/- IS/- Jo0-Orl Equipment: Description VH# Cal. Due Date SN# rTomoscan " 1 ozzq 16 Channel P/R N/A tA4,AN1 ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEXj* Data Analysis Software: Version 3W8* & .5 Cable Length: Sl Type: Z&- i-'-q # Intermediate Connectors: I Calibration Block: ,o/)q3oEi Calibration Setup: 4Scan File No.:. A zr_ 0T. Z.0 Initial Calibration File:4z2(.9.o.,,1q.-3 A .vw7,q - Ol. S1 . 3s Final Calibration File: e.jr,,wucD rp*,-vOzwA Scan Start: Z = . "." 7.Scan Start: 8=-- Scan Stop: Z = :7.78 Scan Stop: 8 = 7t,,S" Index Increment: 30 Channel Angle Serial No. Comments 0 5oi-. so -qC
/
Results: (.ro Recordable Indications Leak Path Detected Axial Flaws Detecte Circumferential Flaws Detected Comments: Analyzed b'y: Level: Date: (eLo0z Reviewed by: Level: _-Date: io/ Z TYPICAL DATA SHEET 82 ,.l'L* FIGURE 5 Paae 31 of 32
0 A" SRA MATOMME CRDM Nozzle Ultrasonic Examination Data Sheet Ar.jF= Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - Nozzle: - 19 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 314 End of Noz, (in.): 0.41 Probe Serial No.s: Ch I S0379CN Ch 6 n/a 'AYai sc -sl'rt:*-. d l' -, t.* , I " ,. ,..s h, "Ch2 n/a Ch7 n/a i , -- . , . " .. Ch3 n/a Ch8 n/a Circ. Scan Start:I -51deg @1 -07 1 Stop: 365 Idog @1 7.78 Setup: 3 Ch4 n/a Ch9 n/a Files: A2269 09.30.20IA2269 09 51.35 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI ** 2 ' 3 4 5 6 r7 8 9 10 12 13 14 15 16
`17 Data Loc. 314 344 14 44 74 104 134 164 194 224 254 284 314 Degrees WELD Noz. Lom, 0 30 60 90 120 150 180 210 240 270 300 330 360 Degirees PROFILE Noz. End 0.41 0.41 0.1 0.41 0.41 0.41 0.1 0.41 0.41 0.41 0.41 0.41 0.41 Inches MAX. 3.39 3 65 13 91 4 44 5.18 5.49 15.83 5 73 5.27 4.59 3 96 3 56 3.39 Inches MIN. 1.81 2 08 12.29 2.88 3 43 14.00 14.50 4.15 3.50 2.91 2.10 1.92 1 1.81 Inches Comments: Measured Thickness: 10 617 @*theta of 2401 denl with an axial position of 6.31 Lim ited Scan? (YIN): n Analyzed by: -" ._ Date: 6/.t,
- Analyzed by: -J7A- Date:
0ý 6 ocj4Lb-o1. Page 1 of 9/26/023"42 PMa No=z19 o 2
ZJO Z GLed I. P2e4o UL ZZON Z019Z1/6V1d IV; 4 l ,- #,,.i *4> 1 Ul'.
ll u - r - ';, . .~ I4lI I'.. . ... .. . 4.. , . .4 ... 4 ...4 . . .. - .. I 4 4 5 7--------I------ 4- -- --44 , ~4<
-'-.-~?.t~
-:-- -----'I,'..- ---- 4 ----- ----- 'k --- - - - ')'-4~ - -v t4
-4 . . . I - .. .. . . . - .. ............ .. . . O- . -- Q <
--- 4....4..... - - --. 0'0 IIlJUAMO ------------------------ .......... - "-----
. .. . . . . . . . . . . . . . . ."-T . -.--.-.-.- - .-.- . .-.-.-
-.-.-. -.-.-..-.-.- .-.-. . ..-.-. .-.-. . ..-.-. .-.-. . ..-.-. .-.-. -O- -.. .. ..-. . ..-...-.-.-.---.-.-
' ---- ----- ---- : ,, 7 t t 4 ----- ---- ------ ---------------------- ------------------- ------------ -- -
W4.' 4
& ~ ---- ~~-- ------- --------------------------
-V - - - -- - - - - m u o a *
"" ' *-'------------- - - - - --- - - - - - --- - - - - - - - - - - - - - - - m -- - - - - - - - - - - - - - - L A,
4VN. 14 -17
--- --- --- I........
-_------.-- -- --- --- --- . .... ----------- ,----"-..... "- * ------- . *, To. +t+" "
I..t - - -.-.. .-- . .... ... -- . . - . - -- . ,t A > A !'
, X" ' * $ ,; " , - " "* . . . - "'-. ... . "-.. . . . .. .
.. . . . .. . . -.4 , "
'"b'&
ttff 9jn 4' 4 4 44 ¢' 4 .4 Z. r'v 1 f_.4j4 ,'
- 4 4 ri, 4 4 7
~l%rs 4& !. Wia*, :'lil :,/-,
-W N~U.: MA-IUU-1, a44'L-tU-MZ,-, 4 and 5 "A1/4 Reactor Head Penetration r-RA "&T,.M AMP Ultrasonic Examination Data Sheet Customer: 1* IiPlant: 6 xj 8 e4.ekl Unit:
Penetration No.: p0 Procedure: 5/- I-Equipment: Description VH# Cal. Due Date SN# gTomoscan Z-/'s/c~3 2.O2.sq 16 Channel P/R. N/A N,1A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX MData Analysis Software: Version Y.T oV Cable Lenglth: S; C), Type: 26- i-,,- # Intermediate Connectors: I Calibration Block: '6.o/),3o*r, Calibration Setup:= I Scan 2 File No.:J7a.qrTz.I
- J7977.r*, ,f2
*49-It..-. sr.ol.j-..d.o., It. 79,.o Initial Calibration File:4:226?-W v.
Fn1Ci~r~tn 2P.2? Scan Start: Z =- Scan Start: = Scan Stop:- Z --= "Scan Stop: . Index Increment: 30 Channel Angle Serial No. Comments Results: ecordable l Indications Leak Path Detected Ax-a Dm c. Circumferential Flaws Detected Comments: Analyzed by: . Level. 2 Date: . I Reviewed by Level: I Date: /-'. o .. I
/TYPICAL DATA SHEET FIGURE 5 i
ý CkViD-L Page 31 of 32
I' A A KAAr.A A CRflM Nln77l I lhrcnni,. ,a..arnuujii
- . . vm IJaLO JIIL Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 20 Procedure: 54-lSI-100-09 Nozzle Dimensions: (1A.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg:): 295 End of Noz. (in.): 0.25 Probe Serial No/s: Ch ' S0379CN Ch 6 n/a SP d f *i,; Ch 2, n/a Ch7 n/a AM. 9 ~ Ch3 n/a ChB n/a Clrc. Scan Start: -51deg @ -0.7 " Stop: 365 Ideg@ 7.76 Setup: 3 Ch4 n/a Ch9 n/a Files: A226915 53 41117 06 3917 09 37117 43 31118 02.35/18 34 30 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (In.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI '_,
2__ 3 L 4 5 6 7 9 10 11 12 13 14 15 __ _ ____ 16 17 Data Loc. 295 325 355 25 55 85 115 145 175 205 235 265 295 Degrees WELD Noz, Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Inches MAX. 2.90 3.12 3.62 4.01 465 534 5.50 536 4 87 4.21 3.58 3.26 290 Inches MIN. 1.16 1.38 181 2.25 308 391 403 3.79 3.16 2.51 1.97 1.36 1.16 Inches Comments: Measured T"hickness: 065 1 theta of 282 deg with an axial position of 5671 Limited Scan? (YIN):_ N Analyzed by: Date: -2C-o "L.-- Analyzed by: JA Date: 9/26/200210"41 PM Blank Clrc Blade Data Sheet (2) Page 1 of 2.
SJo Z 86ed I. iB43 s1xq3698]d-eqoJdopejqsn OOZI/9gI/6vd WM:OL
,xp
___uoj*eoejwep Il1qutAoa 111dn L- PUA ZOfN,--- "/ S9L - ". -,.----- CL
-- LLL- OL- 6 98 L 9- 9-7 Z-'S a'5'-S--' ".~'~ .. >7 I-l OO !8 -. - ;. ,i
, . , ,,v',
-t2......... i _- L_ L _ " Os 0 ,
...........-....................--.-..-- 7.--..---..-.....
77.. .......
.. .... . ....... I... .-
... . .. . OPI .... .. ..... .................... ........ ..... .................... . . ...................... . ....... ... 0"7
.- ---- - -.. . ...............-+........... .... ................................ - -- - .-. .* ....... .... .......-....
. .................. ........ .... . ...... . ... . ................................. .......................................... .............. - . _-....,. .0
... ..... ........... ........... ..... ..... I..................
...... I.................
S-. -............. .... .. .. I.. ... . ... .. . ..... ....
- .4- -- - - .:-.................
.. ...... ............. . . ... . ...............- ,. . ..... 0.,,
* .',.4**;'*.
"'3' ..- -* - 4;* }*
- " - -*"* 4 T' - -'* - - -. - - . l" -... . ...... ... ...- ............-.....
l"'............... .-
""';..........l
.. ....... .. * .. 9-1*
S 6
. . . . . . . . .---..-------- .7-.------..-.-...-..---.. -
-11 A'- -.-.--.- ---. --.-------.. .... :.-.-----A.-----0 A... - ... . ojW, I
, T7 7774 .... . .......... . . . .......
-,,,, +
44*+;+'*J*.* ++.,,4 .;. .,t ..+.( +.:.+".,++_.,.+ 0 Iv f,, ..... ilJ,O~ OZ elzzoN ,, +-; - -,- .. , .t';, *'"t- ,:-*,. ..... t" - 44' I' 1 Lit 4 tL2 4 4 42& 4 OK. r,. c, -4. 'I 4 AM Ž~~C;3 Y ~ ~ ~C~' .. 44 - - '-yau.. :~" 4 t-"~-'V - .7 re,-$ ---. I ;,-y+. Oj ',I'J9 d 4 or,.I;rN *M,. ,-.t'" dN,,ab*Io+v.g.t-I r , .." K (--Ii'
- - a."-.
CuZC FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE L-AZ. Remote Ultrasonic Examination Of Reactor Head Penetrations P PROCEDURE NO.: 54-ISI-100-095a PQ NO.: PQ-1 00-1, 54-PQ-1I00-2, 3, 4 and 5 1kReactor Head Penetration tRAMA1WEMI AMP Ultrasonic Examination Data Sheet Customer: M IYc_ Plant: ,-L 8eArkj Unit: Penetration No.: ZI Procedure: 59- 1is- .0-ey1 Equipment: Description VH# Cal. Due Date SN# gTomoscan I/z,1.3 16 Channel P/R N/A N1 ACCUSONEX' Data Acquisition Software: Version 6'.2.5 ACCUSONEXm Data Analysis Software: Version . g: 7 . Cable Length: GO' Type: .'- ri-, # Intermediate Connectors: I
.Calibration Block: g.o//,3061 Calibration Setup:
Scan File No.: -,h 0.o5 ..-. ' o Initial Calibration File: . .,Z
,44q.- /.
Il- WO. Final Calibration File: p('e 1ogajw 15j, Scan Start: Z := Scan Start: e =Scan Stop: Z = -. C,! Scan Stop: e=03. Index Increment: 30 I .Channdi Angle Serial No. Comments I j. Results: tNo Recordable Indications "* Leak Path Detected SAxial Flaws Detect-ed Circumferential Flaws Detected Comments: Analyzedb: Level: Date: rReviewed by: 4 ,..... Level: J Date: / -/y .. TYPICAL DATA SHEET FIGURE 5
ý -01110V Pace 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - _ Nozzle: .21 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 312 End of Noz. (in.): 0.22 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a xiiStn\f ',u S et~ 0:~'in Ch2 n/a Ch7 n/a
- iet~f ~.E.. ~ ~ ',1-;,*, ,.~n/a Ch8n/a Circ. Scan Start: -5 deg @ -0.7 I" Stop:I 365 Ideg @c 7.78 Setup:I 3 Ch4 n/a Chg n/a Files: - A226914.50.12,_14.10 46,_14.00.03,- A;q.fl,:(,:p.%7,Cal Block SIN: 60119300 OChS n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI
-3 2 _ -4 -6 -9 10 11 12 13 14 17 Data Loc. 312 342 12 42 72 102 132 162 192 222 252 282 312 Degrees 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc.
PROFILE Noz. End 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 Inches MAX. 3.32 3 45 391 4.52 5 03 5.55 5.73 5.59 5 27 4.57 396 3.41 3.32 Inches MIN. 1.57 1.70 2.18 2.73 3.54 4.24 4.55 4.50 367 280 2.10 1.70 1.57 Inches Comments: Measured Thickness: 0.653 @theta of 302 deg with an axial position of 5.59 Limited Scan? (YIN): n Analyzed by: Date: t,/& ,- _, Analyzed by: Date: 9/26/025:54 PM Nozz 21 Page 1 of 2
Zo 10ZQ~ SljetIo ýZ ZON ZOI9ZI6N~d V9g:9 uo1ea1ewep IIqUMOa I II!Lldfl PU3ZN 6 9ý- 9- 9-U' L c
'4' 4444444 4\.444, - 'P 4.44444 4444 4 -.
.4'44 4444)4.4 444, 44,4 444444 4 44 4 4 44.444. s 4 44. I44~
44 44!
,,z 049 4 00V44 4.44, 4 4 4,4 444444444 444 4
-------------- I...... -- - - -- -
4444
- ý,4, .... ....
4444 I-444 4---- - 4--4
.44444. 4444444 444 444444)444444444.4444 *44 . . .. . . ....
------------------ -.. -7 ----------------
.4-- - - - - -
- -- --'4 *---44-444
- - - - - 4 - -4 07 97 liIqumoa 444'44 44444444
- - -444----
---- 4 OT 4444444444444
-- -444--- 4-40044 44444444
,,UU4NUIUA.U44U
.. maI~
,,~lU4N4TIIEA Mmmin~4UUIh 4-n~UuIII~U4U~EU 0IUUA1IEmul'm 9.9
------------------- -------------- 0,9
'9*
-------------- O*L GL
------------------ --------------- --.-- O's
-------------------- G's6
- 0'6
------------------- - 90I6
.0*14
- - - - - 44 44-- -
- Totr
---------- I--------
~
- - - - -4 I4- - - - - - -
-- - - P- - - . '- '
~~~~~~~
4~ - ~-,-44 . 4-4-.- - -~- .-.
-'-4
;4
- 4 7, 1 ---------
1 "4. I4 44 44 4 444 4**4 444 44*4 4 4 4* 4) .44 44.44 4..4
.,,*4444 4444-444
*s...L 4447-
444*44'P* 4.444 4 4444 4,
*44*4 444444.
4.4 .4*4. 444
*"r.:
V4 444. 44 444444 4' 44444 .4,
- '*Z*44 44..,. 4.;44 444
. 2 -
*4 44 4 - -
- 4 ., 2,*'*
- .4-,
01C1 - FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-SI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-Z 3,4 and 5 Ak Reactor Head Penetration FAWAtME A1NP Ultrasonic Examination Data Sheet Customer: Wm, Plant: &,y.k.Unit: aerkI Penetration No.: Z -- Procedure: 5q- /-/- DO-0" Equipment: Description VH# Cal. Due Date SN#
.Tomoscan "
16 Channel P/R N/A NIA "1/A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3-" ?..? Cable Length: Sol Type: -2..- t-q # Intermediate Connectors: 1 Calibration Block: &o//1q3oD/ I Calibration SetuD: I Initial Calibration File: , 7z&9-0o0 1q z.,
"IScan File No.:. AA Z?- -i-oc'. rj.s(
2zCoq0,,t-.19 Final Calihratfinn PIl. .Ole,& r_1, M F-C. Scan Start: Z - - o.1. Scan Start:O= . Scan Stop: Z =9 a I(. Scan Stop:8= ,' Index Increment: 30 Channel Anqle Serial No. Comments
"/ 50 503
$ 7-:l c4 Results:(,r No Recordable Indications, Leak Path Detected
- Axial-Flaws Detected1 Circumferential Flaws Detected Comments:
Analyzed by: Level: Date: */ 0/Z Reviewed b y: .Level: -Date: . TYPICAL DATA SHEET FIGURE 5 q0 q-*1.6 101&- Pace 31 of 32
9 A SAdMATrcM A ANIJ CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 22 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iPr ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.'): 331 End of Noz. (in.): 0.35 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a 'A Itdeg@.9*,,* _*al o,, .tJp:lT C h2 n/a Ch7 n/a Fes. "1"'.'7 Ch3 n/a ChB n/a Circ. Scan Start:[ -5deg @1 -0.7 1" Stop:j 365 Ideg @I 8.11 " Setup:E 3 Ch4 n/a Ch9 n/a Files: A226907.45.19 IA2269_05.51.51 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adlusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (dog.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI 2 __ 3 4 g 8 9 10 13 14 16 Data Loc. 331 1 31 61 91 1121 '51 1 18'1 211 241 271 301 331 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 Inches MAX. 3.34 3 30 13 84 4.46 5 01 5 51 15.72 15.60 5.21 4 69 4.14 33666 3.34 Inches MIN. 1.86 1.74 1.90 2.59 3.48 4 07 14.51 4.39 3 87 3.14 2.38 1.977 1.86 Inches Comments: Measured Thickness: 0.653 @ theta of 265 deg with an axial position oFf -:'6.73, Limited Scan? (YIN) n Analyzed by: ie .-_- Analyzed __Date: by: Date: 26
- 0* Nozz 22 Pare 1 of 2 9126/023:58 PM
S* ,.1-",t"s
.~ " "-r'"1'"..t :d ;- * "- > ",,-"' Nozzle; 22 Profile' :
RAMATOME AN7 , , Pi
'!14.5' '-...------'= - "- " = . . . - '... - .--- -- '---"-"-"---"-"-------- .0 135. .*, ~~~~~
.. ' '.---- .. ... ... .."-----'..4, '".. :' 3... "....... '
~---- . "., . . .. . . .. .. . . .. . .. . . .. ".. . '-y.- -"," -" .. .h-"- * ----
* -' *l,-.**
130---------- --- --- ------ 'C 12 0.5 - - - ------ . r- - - --
------------------------------------ -,5 1 -- - --- I 12.0 - -:...----------.-------...--- - - -S [""
455 8.0 .- u------uhaf--ggga---ugu----uuuf--ua
-.-.--------------- ----m uu
.-------------------- ......... sau m...-m .
-------- .---- .--- n-200
--- --- -.-uuurm
-~uuu -ruw 250
-u--
-~nt~~tuM fn -St
-mnu-u-su-u-mt-t- ,
"9 .5 .................. r . . - . . . . . . . . . . -- . . . . . . ...................................-- - - - - ....---- ---.
9.0 .... ..........................---- - ...... --------------.... - .-- 8.5 -.------------------- .------------------- ------------------- --------------------------------------------------------------------------...... --. 8.0 - .------------------- .------------------- ------------------- ---------------------------------------------------------------------------..... t-- 7.4 .5- -- - - - -- -- - -- - -- -- -- ---- - - -- - - - --- - - -- - -- -- - -- - -- -- -- - - - -- - - -- -- - - - - 639 ,5.4
.0-M5 - ...--~PM -~...
- 9/2602
- ---- . . -..-- - -- - -- -- --- - - - -- -- Nozz22Chartl
- ---- - - - -- -- - - -- -- - --- -- - - -- - - -- -- - - - - Page 2 of 2
. .. . . .. . .. . . .. . . . . . .. . . .. . . . . . .. . . .. . . .. . . .. . .. . . . . 4.. . ' . . . . .. ..... .. . .. ..
3 .5 --- i-I*:': I-=- -. 3----.--- 7727 , 3..:.'1 5-6 ----------- --- -------------------------
!~-13..... ----.. -----*
14..1 .. . ... .1 I~~------------ =' ='=1== = p il
--------------- o n il e ac to-----
1-0 ' ... *. 3:58 PM9/26/02.N....22.Chart...Page.2.of.2
I.'- CuW *
.FRAMATOME-ANp NONDESTRUCTIVE EXAMI'NATION PROCEDURE I Remote Ultrasonic Examination Of Reactor Head Penetrations I ~PROCEDURE NO.: 54-IS1-100-09 '
A Fr-A*rame Reactor Head Penetration Amp Ultrasonic Examination Data Sheet Customer: WJ MflC Plant: . . Unit: Penetration No.: TProcedure: 5L1- ,1/- .10-0"* Equipment: Description VH# Cal. Due Date SN# pTomoscan q"-, I ]:L/03 2.o2.gq 16 Channel P/R NA N/.A /, ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3,? &9 3.8 Cable Length: - G Type: I*e.- t-,-q # Intermediate Connectors: I Calibration Block: ,o/l.q3,o6 Calibration Setun: i IA=9C.- Th,3.o/" tcan File z.c,,q-/,P. No.- Az-C.9 -/o.z-&-tW1.1 Scan Start: Z -- o.:-V Scan Start: 0 = -5. G8 Initial Calibration File: Aq-zc,-q ,,o.iq. Z Fin= . lihr
~n Mi"~CC'(Ji ms, . . .. ., , .
INUA.J-w ri~FlAWdf
-JL, Scan Stop: Z = -*. c,/Scan Stop: 0 =
Index Increment: 3. Channeg Angle Serial No. Comments 1 50. 503 7-'Ict4 Results: No Recordable Indication Leak Path Detected Axial laDetured f Circumferential Flaws Detected Comments: AnalRved by: Level: Date: 19 b4 0 Re'viewed by: -Le-vel: -27Date: 1,0/q A l 11-1 TYPICAL DATA SHEET FIGURE 5 Page 31 of 32 a
A I=R AMAT'o IMI1 ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 _ Nozzle: 23 Procedure: 54-1S1-100-09 INozzle Dimensions: (in4 ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 290 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a Axiai.scanazr$sairt. ```*' ai~g.`@1. *1I'-;Stop',I : IdeJ*i--,". -Setub-I, :,= Ch2 n/a Ch7 n/a F~~~W~~s':-,". 1Z~~~ . Ch 3 na ChB / Circ. Scan Start: ]-5deg @1 -0.7 " Stop: 365 Ideg @. 7-961' Setup: 3 Ch4 n/a Ch9 n/a Files: A2269_10.35.11,10.49.58,_11.02.04.11.12 50.11.16 3: Cal Block SIN: 60119300 Ch 5 nla Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI - 2 _A 3 4 6
-7 8
9 110 12 13 14 15 16 17 4~~Z 4_ 9_ _ _ _ _ _ _ _ _
;Data Loc. 290 320 350 00-_ 20 50 80 110 140 170_
200__k-230 260 290 Degrees WELD NOZ. LOC. I 0 30 60 90 120 150 1180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.17 .. 0.17 0.17 0.17 1 0.17 1 0.17 0.17 0.17 0.17 0. 17 0.17 0.17 0.17 Inches MAX. 3.43 3.63 14.12 4.79 5 42 5.73 5.77 5 64 5,26 4.59 3.96 3.56 3 43 Inches MIN. 1.93 2.00 2.54 3 36 4.10 4.63 4.86 4.37 3 76 -3.12 2.42 2.09 1.93 lInches Comments: Measured Thickness: 0 617 @ theta of 3101 deg with an axial position of 5.39 ... L'imited Scan? (YIN):, n I Analyzed by: *_. v loZj.oZDate: qiz t.,,o?. Analyzed by: /i Date: 9/26/024:24 PM Nozz 23 Page 1 of 2
Z10 Z e~ed LiPliD CZ ZZON Z019Z16V'JJ yZ:y uoileDJewep Iflqumoo / llqn PUH *ZON. i ýT SL_ CL 6-1 9 i le 2z OZ
,- 2; 937'"
22 '*42
--- 2----
................ 2
- - - - - 24 222-7'.
7 ------- - 422 44 2 2 2i 2 i--- 2, 2j2 22'.22 4 422' L.4. 2,j 4 2 2.22 412.--- >-
-- - -22' --
2-- -- --- 2--- 2---- 2---- 2.-22*--22.2------ 42'2 22 2
*'2222 2222 2.2 2 WIT 2- 42 ----- - 2 -- ----2: 2 24222 2' 2 4 * - -
.t;221222222 22 2 22 2 2 --------------------
if2'Z .,222t.. 2 HIqUMOG .2 2
------------------ 07~
- 42. 2 22 22 222
'22222 2.22 242 097 2 - 222 2 2222222 b~~~~~~~~~~~~~h~~~~~
~i 1--------------------
ik ii i i6fih~1 h*~ rn a u--nnw - --n n
- n - -------------- u kiliS~.n*.j.n C............----
0*9 9.9 0L
------------------- --- --- 2-- -
- 2. 22 42 ..2 ¶4 222 "2 2 2 2 2
4222-- 2......*.......
--- 2 -- ---
2
..2..
-- - - . 2.. 4.
- --- .-5, -
2222.
- 2--
2 22 *2222h -'Z*4.
-- 2--t--------7-2 0*6
---- -- 2--- 2 2- ------------
.. .. . ---------- -4222... -- - - - 2--
- 2--
- - 2-- - 22 .---- -----2---r-22222 G"6-a 22 2 22 2 2 2- 222222222 2224,22 4 '22*22
----------- 22 ---2224 2 2 2 2 2. 2 2 --
------------------- 2 - 2-- ... 22 ... 2 .... : .. p24 2--
-- Ot 2222 '*1*424. --- 22 22' 2'; ---- 2- 2 2 .144.......-
2' 2 2 .5 2 2ff 2-
-- - - - - - - - 2-
.... f.... 2.222222.. 2 22222 2 '.. 2 "2- -------- '------
-- 2-----
---- ---)
------------ w------ 2--
- - - - 2-2 - - - - 2 22
- - 2---- 2-2-2-----2 - .4-, -----2 2.24227>.
-- - - - -- - - -- - ,222-------- 2-
- -- - -- - - - - - - - 2 2 4-4-4r -'t.-V-t..*
.24----------
2 *22 2222---- 22-- - 0-. .t 2 kk 2'2. 2 22 2, *22 2 22-- 2 2 2----
- ~~~t~~ "NV Vt 4 NaO.LVV4' 5~N~
2 IJOi EZ *2G2I\YZO 1 0
r4r" u.: ru-luu-i, 04-r"-1UU-Z, 3, 4 and 5 h A Reactor Head Penetration FRUA1J ZA MP Ultrasonic Examination Data Sheet 0 Customer: WMC, Plant: P,4-- PeA..k, Unit: Penetration No.: 2V Procedure: 5L/-JS/- IoO0'j Equipment: Description VH# Cal. Due Date SN# jTomoscan " * , /;/0zozq 16 Channel P/R N/A "N/A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEXm Data Analysis Software: Versiorn..-3&- y. r7. Cable Length: S
-' Type: Zs- i'i-q # Intermediate Connectors:
Calibration Block: (,o//9,3o3 / Calibration Setup: Scan File N o.: , = --. - ' .c . , Initial Calibration File: IS-
"/. 4'T.o~, .6. J ,/I./8., &.3T, Final Calibration File:O ,, rzw_u-,nM Cw
- 7.YZ.
31 Scan Start: Z - Scan Start: 0 = -- Scan Stop: Z = 2,Q7,"" Scan Stop: 0 =..ci in ex Increment: 3'
,Channel IAngle Serial No. Comments
/ 5 "o'J. .p , 9 c Results: No/ R cordable Indicationsý Leak Path Detected Axial Flaws Detec -- Circumferential Flaws Detected Comments:
Anal ed by: Level:*, Date: i I Reviewed by: Level: -Date: /.' ! I 4/ TYPICAL DATA SHEET FIGURE 5 I N) ýýVJý7-W Pa=ge 31 of 32
A 1=RA MATO3MI ANI' CRDM Nozzle Ultrasonic Examination Data Shoot Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 -Nozzle: 24 Procedure: 54-IS1-100-09 Nozzle Dimensions: (Ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg,); 320 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a 50b Ch 2na Ch 7 n/a Circ. Scan 2--AMTM __MStart:I AMP -5deg @1 -0.7 Stop: Nozzl 365Ultasni deg @I ExmntoDt 7.961- Setup: 3 he Ch4 n/a Ch9 n/a Files: A2269_15 29.12/15 42.09/15.49.07/_16.38 00 Cal Block SIN: 60119300 ChS n/a ChIO n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max
\_I__
1 NRI _ 2
-3 4 -5 6
8 9 10 11 12 13 14 15 16 3_ _ __ _ _ _ __ 17 Data Loc. 320 350 20 50 80 110 140 170 200 230 260 290 320 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees Noz. End 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.7 0.17 0.17 0.17 Inches PROFILE MAX. 2 80 130 O0 3 66 4.05 4.70 5.00 5 21 5.19 4.75 4.17 3.43 2.96 2 80 Inches MIN. 1.06 11.17 1.47 2.54 3.45 3.96 4.32 3 92 3.30 2.56 1.80 1.29 1 06 Inches Comments: Measured Thickness: 0 65 @*theta of 81 deg with ant axial position of .597 Limited Scan? (YIN): n Analyzed by: eZ.A,, . ,j,.-,,.,,-- "Date: 5? - ;29 -c 7-?. Analyzed by: 'N 1A, Date: 9126/20028:46 PM Nozz 24 Page I of 2
- I'
- '=,: '",' c .RAMATOMEAN. , "; . Nozze 24Profie, ,
15.01, ~ I'* .~P~3/4"t ~ tt 14.0d - . ~ Z 4 L . .. ** 0 "2 ....- -. .,. . -.... ......-... .....
"12.50.... ~~~ - "- ------ - .".....................................
-"... ,.:.".:Z-'-,.. ' , - - * .. . .. .. ; 7 '
10.05 91.5 ...... --. ..... - . . ...........................
. v 10.0. ..
81.5 . ........... :........ ............. .. ....................................... .................. .................
. ...-.--...---............... . I......... ............... ..............-
- ................. ... ] ......... .
9.5.......................-. . ...... ................. ........ ................. ..... ..................... 5.5 6.5 40.0 8.05 -..... 6.0 1.....................
..I........................... ............................
5.S -.. ... .... .... . .. .... ....... . . . ................ ................ ................ ......... .......... ...... ...... ....... .. l........... 5.0....-............--- -.-.-. ... ... ... ... ---..... 5.0 ................. ........................................ ..... ........... .............. ,.. . . ............. ........ ... ..... .... .... 4 .5 . . ......... 4.0 3o5 - o.... - . ..-.-----
-.------- ..-ý- . . ...-- _ .. ...... _.,.. *'* . .. _ ......'_.,......... ......._............... ............. ....... ....... ...............
3.0* .. .. *...... .......... . -. .. .. ... ...... ... . ............. _. ... ..... .......................... ,
"2.50 -"- - - I,- I -.. 7....
. . . . ..,* *... ... .. ,.. I0...... ,,...*...... ....... . * - 200..
2.07 1.0*" * "..
------ . . ..... .-.. .'i* .... '- :*
S-1 -- 2 -3
*,. 5Noz-9 E --- 10 --- 711 S ...- 13 -- ý14 - 15
- '1* -. Noz. End --===- 1 -'=--Unhill I Downhill depmnre;-
8:51 PM9/26/2002 Nozz 24 Chart 1 Page 2 of 2
r-w riu.: rw-luu-1, 04-tPU-1 UU-z, 3, 4 and 5 A Reactor Head Penetration nM A--.A'7%5,V C ustom er: M M'PC P e n e tra tio n N o .: V'.- AM-Ultrasonic Plant: Examination Data Sheet o.,* P ro c e d u re : 5 q - i S / - 3ej- Uhit:
,jj Equipment:
Description VH# Cal. Due Date SN# Tom oscan " "q 9 "11-/0 2-,zzq 16 Channel P/R N /A N A 'IA ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version-35S" 7,'3 16 Cable Length: Type: 1-4 *-q# Intermediate Connectors: I C a li b r a t io n B lo c k : / j"&,o q3 o 6 r C a lib ra t io n S e t u p : S c a n F ile N o .: /7 2* /;.z..S-.
; 4* . ? . / , In it ia l C a li b ra t io n F ile : ;2 ;,26 a'7 0 -1./ 11. -7 ij.Y.?/.o7 4*..'4 '..2D Final Calibration File: z jm uuXi,, 'fe", *,q Scan Start: Z = *. Scan Start: 0= Scan
- Stop: Z = Scan . Stop:
, 0 = JO-r Index Increment: 30 Channel Angle Serial No. Comments Results: jc cordable Indications) Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
/
A nalI e b :wd Level: D ate: -7 -* . tI Reviewed by: Level: . 1 7--Date: /Oc/6 I I STYPICAL DATA SHEET FIGURE 5 fi7N. Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Shpft FRAMATCOMM ANF* Customer: Nuclear Management Corporation Plant: Point Beach " Unit: 1 Nozzle: 25 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 302 End of Noz. (in.): 0.3 Probe Serial No.s: Ch 1 S0379CN Ch 6 n/a
~Sb"~~ ~ ~ ! t~:I ~ld~§I~
~ Sdt~f
~A 1 Ch 2 nIaa
'~- .. Ch 7 -n/a V*M in' Sn/a ____________C3 a
Circ. Scan Start:5 313deg 3-0.34."0Stop: 365 deg @1 7.96' Setup: 3 Ch4 nla Ch9 n/a Files: A2269_12 53 23/13.09.18/13 31 07/1334.20 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI - 2 -3 4
-5 6
7 8
-9 10 11 12 13 14 15 16 17 Data Loc. 302 332 2 32 62 92 122 152 182 212 242 272 302 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 Inches MAX. 309 3.23 361 4.25 4.84 533 557 546 5.13 4.48 3.94 3 34 309 Inches MIN. 1.38 1.52 1.71 2.47 3.30 392 4.23 4.10 350 2283 2.09 1.58 1.38 inches Comments: Measured Thickness: 0 65 @theta of 278 deg with an axial position of 5.13 Limited Scan? (Y/N):1 N Analyzed by: Date: 9-, - Analyzed by: N )P. Date:
I, 9127/200212 32 AM Noz 25 Pige I of 2
"'4. *44 4,.
-; ~~4 '2' ~Nozzle 25 Profile'- ,r"'/
.2' FRAMATOMEANP * '4 .. 4 K - - '4
! "5. "* ' ° t;. ' -' *. ... .... .... .. . . . . . . . . .. . . .. . . . . . . . . . . . . 4..
. .. gJ.- '13,; 0 135 ............................... ........ ................
14.0 . z '..... 13.5 .......
. _22v 13.5 . .... . .. . .........- -... -. .r-
- - -. .. . ..... V4 U phi llk 4' 13.0 .-.-.- ----
i .............. 12.0 .......... .............................. 11.5 ......--....... ..... 11.0 ............... .................. l..... .................. I".......................... 10.5 ..-... ....... .......... t................................ S... ............................ S.... .. . .............. ... 10.0
.......... .............I...........
S............ ii
.... .l......................
7.0. .....-........-. ............-........................... .-.......-................................. 8.50 ..................... ...... -----------------...... ..... ................ ................ I-................... . I-.......------------------------
........ 22 ..-.- ..........
7.5 .... .-. .. .... --- ....................... . . . . ....... ............................ S.................................i S....................... .... ..... S..... . ................ . . 6.0 7.0 -....................
. ..... I-...............................I.......... . . .............. ................................
- ------- I .............................
S............................... .................................. 4.0 ........................-.................... .......... ............... ........ ................................ 4 . ...............................-.. .......... ...... 3.5 4.0 -.---------- -----............. . ... . . . .. . . . . . .. 3.0 ......... .... .----.------.-. -.---.--.- ---- ..-....... ......... .-. . -- ..- . ..................
...... . . .- - Downhill 2.0 ...... Side 1.5 -. i......- ... -"i~ ----- -- ---- i' .. ........ .. .. ... ........ . ........ ......................
0.5 ............... . .. .................- .... . ... 0.0 4:;.V'
-1. ,,0 . .... '1.0
"" 50,....
100
- 1>
150 200 25O - 4300:; 1,: 4,1 ,,,. - . ,' *
-2
-5 -6 -4
-7
- 9 -- 10 -- 11 -- 12
-13 -... ...- 14 -- 15 -16
-Noi- End "---1 "*- Uphill / Downhill demarcation 11:31 PM9/26/2002 Noz 25 Chart I Page 2 of 2
I I rv N.: -1UU-. 04--.-1 U.. - .4 and 5 1 I FT AA Reactor Head Penetration
'Ultrasonic Examination Data Sheet Customer: ' NJ M _-.J Plant: M-- 3,e-,k Unit:
Penetration No.: /Procedure: Equipment: Description VH# Cal. Due Date SN# VTomoscan " ,1/-4103 '-1,9 = ~. 16 Channel nP/R e ACCUSONEXI "vData Acquisition NS/A Software: Version 6.2.5'No CmmA ACCUSONEX'm Data Analysis Software: Version S- ,3. 9 7# Cable Length: - IS ; 0 Type: Ze.- t'4q # Intermediate Connectors:I Calibration Block: "&ol e 73o el Calibration Setup: S ca n F!Ile No.: A,)2"-2,1.. o/. ý2.73" Initial Calibration File: ,f2-* 71- o.- *,06 c-Axa FlZaws Dett.e Final Calibration File: Detecteum pderaffljf* Scan Start: Z -" Z2 Scan Start: e - Scan Stop: Z =rS ,'JScan Stop: 0 =.7*5 Index Increment: 30
-Channel Angle ISerial No. Comments i *o' SO5c.-17
- 0 F
'I SResults: CfNo Recoi_.dble Indicatiý_nt-, Leak Path Detected Axial Flaws Dete*-U--- Circumferential Flaws Detected Comments: 1--e Analyzed by: Level: _L Date: I -? I-oz Reviewed by: Level: -Date: A9 -'. ,. 65 TYPICAL DATA SHEET oc.3 *O-t5°°Z/ FIGURE 5 Page 31 of 32
FRAMATOMG AN'P CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: 26 Procedure: 54-ISI-100-09 INozzle Dimensions: (io,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 59 End of Noz. (In.): 0 Probe Serial No.'s: Ch i S0359NF Ch 6 n/a Axial Scan Start:I -51deg @10 " -Stop: 8.56 Ideg @I 3651 Setup: 4 Ch2 n/a Ch7 n/a Files: A2271_01.32.351A2271 02.08.38 Ch3 n/a ChB n/a W' 4.,- e ,61Ch4 n/a Ch9 n/a
- * -____________, Cal Block SIN: 60119300 ChS n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 NRI 2
3 4 5 6 7
- 8 9
10 11 12 13 14 15 16 17 Data Loc. 59 89 119 149 179 209 239 269 299 329 359 29 59 Degrees WELD Noz. Loc. 0 30 60 90 120 150 ISO 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 .. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 2.83 3.03 13.36 4.01 4.73 5.36 4.21 3.60 3.03 2.83 Inches MIN. 10.77 "0 89 1.20 2.33 3.05 13.94 12.62 11.49 1.03 0.77 Inches Comments: Measured Thickness:1 0 69 teao 33 dewthnaxlpstonf 538 Limited Scan? (YINY I Y 1.7HEMIJAt*, Limited scan between 220 to 301 degrees. 78% complete Analyzed by: tm .- / _. .__ Date: 9.;Z-, 07-O. Analyzed by: .. .. ... i/A Date: 9/29/20028:15 PM Noz 26 Page 1 of 2
,, , t..
.. , " ' No zzle 26 Profile .Q I* FRAMATOMEANP " -
14.5, - .-... ~~ .... '"'S . w. ;:,< , *,,* .i.
.... ........... . . . ...... . .... ... .............. .. . . .... . ... ..... .. o.....
13.5'.. .... - .. ..... .
- .......... ... . ...L..................
.-.- .... -....... ........ -:................................, ..................... ................ .7..-tC....................... ..................... ................ . ......
13.0 ......... ......... ..... ........................... .......................
. ..................................... *I......... -. ..... .................. 1-.............................. ...---,..Z..':.; ......._......... -_ ........ .... 9 ? ~ .~
Slide 12.5 ......................-............. ................................... ................................... ................................. " . I- .. '-.
..... ............S..... ............. . ...I............ ..... ......." . . . ....
12.0 --...-...... .-..................... - - .-....... . . ................................................... -I
......... ...... ............ .. ................ ... .. _..... ......... . .. . . ........... .* .=..'....
11.5 ..........................................................................-.......................... ....... ...... ............................... I"....... ....... ......... .... ...... .................................... 1 1.0 . ................................. ................................... ............................... .... ........................ .......... ...... ................................ S..................................... .......................... - - 10.5 . ......................................................................................................... ........ ...................... .... }..................................... 1 0.0 ...................................... .................................. .................................. * . . ..............
....... ............. .... . . ......... ... . S.................................. ........... ...................
9.5 0................................................................................. 9.0 ...................................... ...................................... ... ......... ...... . . ...... . ... . ........ . ...... ............. S..................................... ............... ..................... 8.5 .. .............. 8.0.0............................................ ...................... ............ 1 ..................................... 6 ...................................... -.............................. ... ...................... ..... ............. .... ............. ..... ..... . ............................... I.................................... 67.0 ........................................................... ? -.......... .. ..................................... ..................................... ..... ............. ................ . .................................. 5.5 ....................................................................................................... ................................... .......
................. S.............................. ..... I......
6.0 . ....................................... ................. ...... .............. ...................................... ...................................... ..........
...... ....................... ... . ... .. .I ...... .........................-.....................
5.0 . -.-............... ...... ..... ........... -------------- --.....-..................... 5.4 ........................... .......... ................. .........................- ....... ..................................... I .................... .. ...... ......t.. .......... .... ....... ... ... ............ 3.5 3.0 T................. ............ ..... ................ !!!; ... ........ 2 ...... .. ....... .... ......................... S................... . *.. ......................... ... . .* . . . .'. ...... ... ...... ....... 2.0 . ,.. ....................... . . .....................
. ............-.......... Downhill Side
-- ---- ---.. .. . o 10.5 .. L .
0.5. A.".""".......,....' .z25.t......................... ... . . . . 1. I I
'.4 b';
9. 9 . 0, """ ' ;" " " '-1'00 150 : ,2 0 0 - 1 250.7,'r 30011 t~~ 56IS; &
"5 , "9 . y
,- . ", ; "; - . " . Degrees,
.,w
-2 -3 °. * ',.
",. :)... ":,*,.,300
. ,. o;* .,-," ,*
8 r;,' 999 -6
-10 '---"11
*7
]
250
! -12 IA tji It{ k1'
'3.. -1 3 14 15 -16 I2fl; Wi ,Noz. End "--1 "-i--Uphill I Downhill demarcation 'V 7:40 AM9/29/2002 Noz 26AxWal Chart 1 Pag6 2 of 2
Iu ru.: ru-1 uu-1, rw ,4-Vu-iUU-Z,3, 4 and 5 Reactor Head Penetration F IX"IME A Ultrasonic Examination Data Sheet Customer: WM.C Plant: Po ,-- 8I,-qe,~.. Unit: Penetration No.: 4Z-- Procedure: 5- ,S/- .. "O E uipment: Description VH# Cal. Due Date SN# gTomoscan ", 99/ -1 , .o-q 16 Channel P/R NZ.A I, NIA -. /1A I ACCUSONEX` Data Acquisition Software: Version 6.2.5 Intermediate Connectors: r-q # ACCUSONEXIM Data0oAnalysis ' Type: k.- Software: Version3! s. P. Cable Length: Calibration Block: "o/Jq3oE/ Calibration Setup: Scan File No.: -. "Initial Calibration File: AZZ2-- o,4. 4-'.o S- I*,lo,.., Final Calibration File: _c.,iurt-.*u rw*rb gr.*.., *. Scan Start: Z=-6.i,' Scan Start: e =- Scan Stop: Z= q? "Scan Stop: 06= W* Index Increment: 30
-Channel Angle Serial No. Comments S~~' qgc o ýs A- l y
12 Results: 1/No Recordable Indications Let. Pah D qoctd Axial Flaws Detected , Circumferential Flaws Detected Comments: Analyzed by: Level: Date: V?/z-Reviewed by: . /Level: I
-Date:
TYPICAL DATA SHEET FIGURE 5 A Z 7. -4Z . vo . ;Z - . 2 -:S 4 1q3 73416 *33 39 13? &, 173 OIL) A Z:-qz 2 :. Li . ac 2 Page 31 of 32
,C,
. Aq ZLG8
A FRAMATOMM CRDM Nozzle Ultrasonic Examination Data Sheet ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 27 Procedure: 54-ISI-100-09 jNozzle Dimensions: (In.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (den.): 0 End of Nz. (in.): 0.17 Probe Serial No.'s: Ch I S0429CN Ch 6 n/a Axla!i a3 "kt.atSt . jIdeg - " Setup:, , Ch2 n/a Ch7 n/a
* :-- , Ch3 n/a Ch8 n/a Circ. Scan Start:[ "5deg @1 -0.7" Stop:I -365 Ideg @1 8.531 Setup:[I Ch4 n/a Ch9 n/a Files: A227205 27.261 05 49 031 _06 06 521 06 21.36 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 12 NRI-..... ,
3 -4 5 6
-7 -8 9
1o 11
`12 13 14 16
_17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Nozo Loc. 30 60 90 120 150 180 210 1240 270 300 330 360 Deglrees PROFILE Noz. End- 0.17 0.17 0.17 0.17 07 0.7 0.17 0.17 10.17 10.17 0.17 0.17 0.17 Inches MAX. 3 67 3.85 4.35 5.00 5.67 6.22 5 62 4 92 13.73 Inches MIN. 1.52 1.57" 2.05 2.98 _ 4.08 4.75 1 4 25 1 3.40 11 1.47 Inches Comments: Measured Thickness: 0 609 @*theta of 290 dea- with an axial position of 1 5 041 Limited Scan? (YIN):l Y H!* l", Limited scan as follows: 174 to 205 degl /211 to 236 degl 1264 to 332 degl I total limitation 124 degl 66 % coveragle Analyzed by: -' D~ate: 1)7 E.*7o i Analyzed by." AJ/ Date: 9/29/029.53 AM Noz 27 Page 1 of 2
44 '44 - - 4.. 4,,, .44.. 4,, 44: ' - .4 4. 4 - 4 44 4 4,
**4*I44 44 44 , 4 '44 44,4*4 44 '1.4 Nozzle 27 pj.?fll 4
44
- 4. 444 4 t,
- 44 44444
.';' .4 AMA1OMANt
- 44. 444.44, *444 K .4 4
.4 .4 444 444 4 S., 4 4 '4 4 44 44 44 '4 14.15 14,0 " . . ." *- -
C44 A*, 4 4
- - ...-- 4444144 -.444
. . .4, 4 '44 4,
---------------- 44 i-------------------
I 44 *4 i r 4 4 .4 r - I
*444.
13.5 °.. ................ 4.................. 13.0 ...... ------------ - .............. " "... 12.5 --------- ------------ ------------------- S...... ..- .* .... :.
......... -12.0 ... ..............
... ii 11.5 - ---------------- Z................. -- -
-------------------- 44.4" .------ 44; *44 11.0 - .------------------.--------------..... ................- - - - ------------------ 4 ,4 4- - -
10.5 -.-- .........--------.------------- ------------------- ------------------- ------------------- S.......... ; .... - :... 10.0 -------------------- ------------- ------------------- ------------------- ---------- U 9.5 -.-- 9.0 8.5 8.0 - 7.5 --------------------- 7.0 --------------------- ----------;I-- ------------------- ------------------- ------------------- 6.5 -------, --------------.................... ------------------- ------------------- 6.0 ----------------------------------- ............. --. ------------------- ................... 5.5 ----------------------------------- ... .............. -------------------- ------------------- 5.0 ,.*. .. . W4lI4,49 UUUJWUMMMUj4U.44 9Wi,4MMD,uiurn,uiJj4 4 4 Pumwflmmmw4 4 vpuuwu.uuuina., 4, 4.5-------------------- .............. ... 4.0 ----------------- ................ ------ ............ 2.1.5 3.0 -----------------
------------------- 4 44--
2.30 ....*-... . . 35 -
-L ----------------
... a,---------------
4 - -4. 44-- DowhhIII 40 2.50'- ... ..
........... 1 -------
100* 150 , 200"'" -,:" 3/4 250 ,,
,Denreaac , -
-2 -3 -4
-7 -8
.4 5 -. 10 11 -- 12 14 -15 ------. 16 K:-
i.-~-13 Noz..End "'=-
-1
" 1 ~""=Uphill I Downhill demarcation 9:51 AM9/29/02 Noz 27 Chart I Page 2 of 2
i -w r4u.: rW-1 UU-1, 04-1-U-1UU-Z, 3, 4 and 5 lkeactor Head Penetration rFRAM, ,TOMM, MPUltrasonic Examination Data Sheet "Customer:., N, MVC Plant: ,-- -k, Unit: Penetration No.: ,78 ! Procedure: 5q- S/- .1oO-'D* Equipment Description VH# Cal. Due Date SN#
ýfTomoscanl "1"'*' "/*-;/03j -o.q 16 Channel PIE N /A N/A.M N
ACCUSONEX*M Data Acquisition Software: Version 6.2.51 ACCUSONEX'm Data Analysis Software: Version 35 .T.B Cable Length:- SO' Type: k6- t-j-q # Intermediate Connectors: Calibration Block: 4/qo~ Calibration Setup:
! (,,o/i'*3o *'1 Block:422-7"2 I Scan File No.:
Calibration -Zo. go. I Scan Start: Z - 0 Scan Start: e =
.'2 Initial'Calibration File:
Scan Stop: Z = 9..r Scan Stop: e = r
,.7J.q Index Increment: 30 Channel Angle Serial No.- Comments St 5" "1. .50 q/0'oC Results: eor able Idications Leak Path Detected C-Axial Flaws Detected Circumferential Flaws Detected Comments: rcr,.*'- ,
/
Analyzed by: Level: Date:,. " Reviewed b :Level: -Date: 1aO.9-cZ--
"6/-TYPICALDATA SHEET FIGURE 5 J? o13Do Page 31 of 32
A D ~i.- 3IL" JII IJacL Customer: . ... ..... Nuclear Management Corporation -. - -* e ..- Plant: Point Beach
**. , ,IIIINIA 311 Unit: 1 Procedure: Nozzle: 28 54-11-100-09 Nozzle Dimensions: (1i.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (del.): 318 End of Noz. (in.): 0 Probe Serial No.s: Ch i S0440CN Ch 6 n/a Ctlr~J! * * * °Settzp!t!u i~t Ch2 iles. :
n/a Ch7 n/a
- ~ g"u "Ch3 n/a Ch8 n/a Circ. Scan Start: 0 deg @~ -5 8.56 deg @
"Stop: 365 Setup: 3 Ch 4 n/a Ch 9 fl/a Files: A227220 40.29 Cal Block SIN: 60119300 Ch 5 Depth n/a Ch 10 n/a End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min MIn Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 NRI 2 A 3
4 5 6 7 8 ' 9 10 11 12 13 14 16 Data Loc. 318 348 18 48 78 108 138 168 198 228 258 288 318 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 MAX. 2.54 2.78 0.00 Inches 3.38 4.04 4.72 2.74 MIN. 0.75 086 1.35 2.54 Inches 2.07 298 086 Comments: 0.75 Inches Measured Thickness: 067 Q theta of 80 deU with an axial position of 6.24 Imlted Scan? (YIN): y Y I' eJ Limitation from 89 to 261 degrees. 52% coverage. Analyzed by: 444r,..* Date: . . -p t- Analyzed by: m Date: W 09-.ro.',v 9/29/200210:16 PM Blank Circ Data Sheet (2) Page I of 2
*1
.4 FRAMAir , o'.'2' :
. .,...Nozzle 28 P'rofile II S.. . ...............................
14.0,~- .................
. .. ........ * *4'~
14.0 .............. 4......... .. ...... .............. ...-..... .........
.,* Uphfl t2:
13.5 . ..... . . .............. ........ .................................. ........ ......... 1 12.5.0. -..........-. . . . ..... ..................................... ....................... ............................................................
........ .. . -. -........... ......... :- ,.. , 1- -7 7 ;
T Si .
,6t .de-:
j4 1 3.0 -----------.-............ ..................................................................... ........... .-- ................... ....... 1 11.0 ............................ . . ................... .................. 10.5.....................................................-.-..-. ................................ . . . . ...................................... . . . . . . .... o.o 0.................................... 10 . .................................................................... 1.05 ........
-.. 9.5..........
.................. 6..............
............. .I .= --
.i ..........
10. 0.0 ............... ..................... I....................::
...................... ........ .. ..........................................................................- iii~ =:=2=-i - .
9.5 ................................................................................... -............................................
.0 .................................................................. . . .... ..........................
85
.5 ...................................
.5.............. ....
7.0 ....................................
- 4. , . ... ................................
................ ................ ..... ..... ................ ... 6.. ......... .... ..........................
4..5.- ... . . .. . . 4 5 ........ ....... . . .. ...... ... ........ ... . . ......... ............ ....
~ ~ ~......
5.0...... ~* i .............. . ............. ........ ....... . .......... '.......... ... . ....................... ........ ......... ..... ................. .. . ....... .. ........ ... ...... ...- :-............ ........ -. . - ...
- =. L . ; *....,
2.0 . .................... .. . ........ .... 2.. .... .......................... 5 .5 .................... . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .... ............... ...... .......
. . . Downhill Side 0.5 1.0 ....... .. .-. 4..... ........
..- 4.A.......
. . ...... ~.....-...
. . . I.............
.............. ....-...... , ..... . ..... 6... .,-, ...
.0.. . .
. . . . . . ..... . ..4 . .. .. -
....... ." . .; 4 ,Z,
-z.t&IV 4-
'y 0 . ".44'i 509' ". 2'100" 150 I 200 250- .,- -, 3009 4.t¶.735Q%,
,., - ~~...*.,.. 4 - 4 .4 6% 61% 4 4
S ...... -2 --- 3 44 913 10 11 12 I,
- --- 14 -16 1. I
"- Noz. End 1'""---'Uphill / Downhill demarcation 2..
4444 N 644$ 10:15 PM9/29/2002 usbladeprobe-Pt.Beachi.xis Chart I Page 2 of 2
"FAMATTOME Customer:
AN13 CRDM Nozzle Ultrasonic Examination Limitation Sheet Nuclear Management Corporation -. lnt oint Beach j*it Nozzle:-'-* , Procedulr...e: 54-ISI-100-09 Nozzle imenion's: (10.) ID: 2.750 OD: 4.00 Thickness._ 0.625 Downhill Side of Nozzle (deg.): 318 End of Noz. (in,): 0 Probe Serial No.'s: Ch 1 S0440CN Ch 6
'Oi" n/a dei- ChVs n/a Ch 7 n/a e*-'1 .14"-'. t. ,~iv
,,*"A .VP, Ch 3 Scan rtO d g 0 n/a Ch8n/a
- :ic
*T @ 3 5 e u : 3 Fls A2272.20 0.29 Ch 4 n/a Ch 9 n/a Cal Block SIN: 60119300 Ch 5 n/a IAcquisition Instructions:Ch0n/ Ch1 /
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred.
For example, current limit activated, probe stalled on upward stroke, rotational I tpe cnwe stall occurred. a ecame to.tgtt scan.
.A ..-
- 2 Scan himie fo frm 9too2d. rees. A'-t'otal of 172 degrees.
8 9 14 10 15 16 17 12 IT-I 14I is II 16I 17 18I 20 21 Acquired By: Date: ;z -. - 9/30/20021:40 AM Noz 28 lim Page I of 2
l-W rvu.: rW-1 UU-I, 04-rL-1 UU-Zt 3, 4 and 5 Reactor Head Penetration "Ultrasonic Examination Data Sheet IPlant: , leAI Unit: Procedure: 5'- isi- o-e* ACCUSONEX' Jm ACCUSONEX "Data Acquisition Data Analysis Software: Version 6.2.5 Software: Version+/- 3*.?,. Cable Length: - Type: Z&/- i,4-q Intermediate Connectors: Calibration Block: & o1yq3o,6r1 'Calibration Setup: Scan File No.: :z2.70_o z- 3-7. 25 Initial Calibration File: A -zz. -o.JQ, Z7
* ., Final Calibration File: *,,nn-7urjrp Scan Start: Z = -. ? Scan Start: e =.S" Scan Stop: Z = x2 "Scan Stop: 6 = 14 Index Increment: 30
/
i J( lI TYPICAL DATA SHEET I FIGURE 5 (bIjslc Page 31 of 32
A -. LIUJI nee Customer: Nuclear Management Corporation .. Rfl M Ir.,.I.n _ a.iU 3.La neet Plant: Point Beach Unit: 1 Nozzle: 29 Procedure: 54-ISI-100-09 INozzle Dimensions: (1h.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (de*J.): 229 End of Noz. (in.): 0.35 Probe Serial No.'s: Ch 1 S0375CN Ch 6 n/a MIA~ de"@ 1 1 td:I Ie@ ŽW 4Setbf ' Ch 2 n/a Ch 7 n/a 4'A "?X~ ~ d~~. ~~ ~ >~4~ Ch 3 n/a Ch 8 Circ. Scan Start:l -5 deg ,-I -0.7 " Stop:, 365 Ideg @ n/a
.521" Setup:[I Ch4 n/a Ch9 n/a Files: A2270.03 07.291A2270_03 33 04 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI ,
2
-3 -4 -5 -6 -7 8
9 10 12 13 14 15 16 17 Dt Lo.29 29 289 319 349 19 49 79 109 139 j169 ...199 229 Degrees' WELD Noz. Loc. 0 30 60 90 120 150 1ISO 210 240 270 -30 30 360 1Deg]rees POIE Noz. End 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.3 0.35 0.35 0.5 nce M. 3 23 3 38 4.35 5.-14 5868 6.13 16.10 5.90 5 32 4.58 3 87 3.31 3.23 Inches
,MIN. 1.23 1.55 2 24 2.96 3861 4 63 14.78 4 8 3.56 2 80 .... 1-91 1-38 1.23 Inches Comments: Measured Thicknes O 7 @heta of 50 deg with an axial position of 1 7.261 Limited Scan? (YIN): N -Analyzed by: ,,/,,*_ 't ."Date: 74_,d 1- Analyzed by: */*Date:
9/27/200211:58 PMNo Noz 29 Page 1 of 2
iN. A',
- 4 ';' FRAMATOME ANP ' " *~~ 4;r' I.- , .,'J', -d S15.0 [: *'j:>. " ' , "
15, 14.501.0-......
- 2t'.
l2 Profile.. . ......
......... : ..... ~ '< ' ".n, .* h S....... ........... .:_.......... :........... ........ . * , ,,;. ,o 13.5 . ......- .............. ...................
13.0 ............ .......... .. ...
.*.. ..... l *,
12.5 .-................. ....-.............. ............-. ............... ............... ... .. ............. ........... ............. ....S........ .......
............................. . : .. ... ,i: * -8r d*'.....
. ... a: ,
12.0 ............................ .... ... 1.5 ........... ........... .................. ............. ........................... .... ........ .......... 11.5 ................................................................. .................. 11.0 . ..... ...... ............... .... ............ ..................... I..... ........ ... ...... ... 10.5 1.............. ................... ..... .................. .......... .................... .....
. .... . ........ .......................S....... .... ........... ......
10.0...... . . ...... ..................... .. 9.5 ......................... . .... .... 9.0 ............................................ . .. ............. 8.5 4 ................................ ... .. .... ....... ........ S................................. I ............................. 8.0 .. .. ........ ...... ..... ... .S.... ...... .......... ..... ... i.... ................ I ..... ... ......... ..... . 7.5 .... .......................... . S............. ..... ........... i... ....... .............. ..... 1"............... ......,"......... S.................. ... ............ I ....................... . .............................. 7.0 ............. .......... ........ . 6.5 .................... ...... ...................... .......... . 6.0 ....... .............. .. ... .. ..: 5.5 ....... ... ............. ....... .. ........ ..... ... .... ..... 5.0 ....... ................. !..... .................. ......... .................. .. . ..... . ..... ....... ........ 4.5 ... . ........................................ 4.0 -- . ....... . .. ........ ý................................ ............ . ...................
............ . 1..................
3.5 ....... ..... . ..... ...... 3.0..... ................ ......................... .. ..... ................ ....... ...... ....... .... . .......... ..... ............... ;................ ............................. ..... 2.5. --- -- ------ ... ..................
..... .................................. ....... ..... ................ .......... . ----- ............. ..... .......... ........................ ...... ... Downhill 2.0 S............... v .............................. ...... .... .....
............................ ',.;'-, t,-,..'-;.......
.*..:..-.-L "-i*.'....,-:
1.0 .... .......... ..... ................................. .... ................. .......... ............................... ..S............................. 6. 0.5 -- .............................. . .. A.......... 0.0, I I r1. I I I I ' 'J'.zz
- ..- t 5, - , 100 150 .. .,200 250: _3oK 300' 5 -6
-2 --
*7 3 4
-9 -- 10 8
-- 11 _-12 'it 13 S..- 14 15 -16 jt
-.--= 1 40' in Noz .End -Uphill I Downhill demarcation I:it."
44
'I 12:11 AM9/28/2002 Noz 29 Chart I Page 2 of 2
I ma r- ,.: rw-luu-l, 4ý-.V-I UO-z,3, 4 and 5 1 I iReactor Head Penetration £ -. FAMATCMr-A " Ultrasonic Examination Data Sheet Customer:. WM Plant: co4- Be*,*-k Unit: Penetration No.: ' Procedure: 5q- ,S/- ioO-D* Equipment: I U*.LCjjpn LvON Cal. Due Date SN# gTomoscan "" .q 16 Channel P/R 2 N/A , N/A ACCUSONEX' M Data Acquisition Software: Version 6.2.5 ACCUSONEX "M Data Analysis Software: Version 3:.-' Cable Length: ot' Type: e- i'1-q / # Intermediate Connectors: I Calibration Block: (,o/2, 3o&7/ Calibration Setup: Scan File No.:.,t 22 2 - ..- /is, sy-.kr Initial Calibration File: 4.2= 7a -127....
". 9. . 4..? Final Calibration File: ,ýO.rrM pz',,,wvcz Scan Start: Z- .0 Scan Start: 0 = -5 Scan Stop: Z = S3", Scan Stop: 0 =X.65 4 4iW^ Il'L,-Chann el I;Anql, I S / ; 650' I ii
'PICAL DATA SHEET t
FIGURE 5 f 9-30 Page 31 of 32
1 Ac CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: 30 Procedure: 54-ISI-100-09 Nozzle Dimensions: (It.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 119 End of NozL (in.): 0 Probe Serial No.s: Ch I S0445CN ChS n/a ________________e_____e___________________________ Ch 32/ Ch7 n/a
'91 -' -. P1Vde @ Ch2 nia ChB n/a Circ. Scan Start: 0Jdeg @1 -5 1 Stop:. 8.56 Ideg @1 3651' Setup: 3 Ch4 n/a Ch9 n/a Files: A2272 18 51.59/..18.59,45/_19.22.33/_19.36 43 Cal Block SIN: 60119300 Ch5 n/a ChI rn/a Depth End Point 1 End Point 2 Axial Adljusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (In.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation MIn Max 1 NRI 2
3 4 6 7 8 9 10 11 12 13 14 16 17 Data Loc. 119 149 179 209 239 269 ...2.99 329 359 29 59 89 119 Degrees WELD Noz, Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0,.00 0.010 0.(10 0.(10 0.00 0.00 0.00 Inches MAX. 2.74 2.78 13.29 4.00 4.79 4.22 3 26 2 88 2.74 jInches M. 0 61 0.78 11.19 1.88 2 93 2.45 1.28 0 66 0 61 lInches Comments: Measured Thickness:1 0 699 theta of 1180 deg with an axial position of 5 341 Limited Scan? (,/,N): Y M,=MR*11[ Limitations from 38 to 47, 86 to 140, 237 to 354. 50% Coverage Analyzed by:__" j ----- Ote: Da 9,a*Oz Analyed by: /9Date: 1 C14" 01 -3o-o7-9/30/20021:32 AM Noz 30 Page I of 2
A 9/30/20021:31 AM Noz 30 lira Page 1 of 2
- 4 S..
44 4 4 44 4 4 Nozzle 30 Proile -. :~ ,* s ~ ,. t.~~
- 4, .4; 4., 4
, FRAMATOME ANP 44 I*.0 , ,.,?4.. , , - 4 4-. 4 4 4!
15.0 -1 1 14.5t 14 ........ 0
- 12. ' ..................................
13.5 - _.-". I.....
...................... .... ..... o.
-~ . - ... *.. ... ...... .. 4 U p~'
13.0 --
... ............. ... .... ............ .......... ....................... o. ... ........ -..............4....... .....
12.5 ......................................... .......... ... 12.0 ....................... .......... ................ ... ............. .... .... .......... ............
.o 11.9 .................................................
10.5 ...................... 19.0 ............. 1 '..
- 9. 0 . ................................... ................... .....
8.5 II I . . . 8 .00 ....... ........................... ........................ ........ .... ................. . .... .......................... 7.5 . . . . . S......... l........................ ......... . ...... 7.0 ........................ . . .
. ......... l .... .......
6.5........... ... .......... ... 6.0 ......................... .. ................. .......................... ............. ........ ................ . ........ ................... ......... ................. ...... S........................ .. ....... 5.5 . ................................ ........... ................. I................. ... ....... .... .... ............. ...... ....... ............... 5.00..........................
................... ......... ........... ............... ..... .......... ...... ... ....................... ............................... I .... ......................
4.5 .......... . .o........... .. ................. .. ............ ......... .................................. ................. 4.0 ............ .- .~~~~n ........ r -.... 3.5 .............. .. .. ... ......... 11il .......
.-------- .-- -I - --- - -- ----. --- -
. ....... i........ ..... .... ... ......
3.0 .... ... 2250
.5 .: ...... ... ..... ............. . .... ............ ............ .......................
............... .. I(.
.... ... .............. S.... ...................... .....................
.......... =............ . .. === .. =====
.==..... .
.................. ...........I...................- ... 4................. ....... ............
Downhill Side 150 - . .. 4 . 1.5 ------------ - ------------ -- ---- 4 ... ..... f .................................. . ................ .......... S... - ----)-[--,----L--':*--: yT--- 0.0 .
-0. .....----O ....
t-................ -.
-I ....................
................I
. 1..........
.(........... .. ......... . .4 ..... ....
4 4 44
.J
~ . 4 0.0 . I + - 4-'
,' 0 ,, :* " .:k,'50 100 150 200 25 300 ,' ,0
'44 %! .4 r.. N¶(.4.. *414;Z
-2 43 4
]
5 4 UK -2 6 -7l
- 9 10
- 11 - '12 'ON*
4 .4 . 13 -.- 14--16 12; - Noz.-End -'--1 iUphill Downhill demarcation 9:07 PM9/29/2002 Noz 30 Chart I Page 2 of 2
6 (Ec ý)/Aje iw rlu.: rW-Iuu-1, 04-tU-1UU-Z, 3, 4 and 5 I SA Reactor Head Penetration
*O*MAM ZtM AM'P Ultrasonic Examination Data Sheet Customer:' NM CIJC. Plant: P, 6eA,,A Unit:
Penetration No.: 3 j Procedure: 5Ls/-S.oO-"o* Equipment: Description VH# Cal. Due Date SN# Tomoscan "1 16 Channel P/R N/A ' N A/,I ACCUSONEX'4 Data Acquisition Software: Version 6.2.5' ACCUSONEX'm Data Analysis Software: Versionq .e& s.Sf Cable Length: SCI Type: Ze/- tý-q # Intermediate Connectors: I Calibration Block: (.o//q3o r1 Calibration Setun: Scan File No.: A9Z?.I*Z-01*.-i;, wt", Initial'Calibration File:ScanF i - oA/.,45, co Final Calihraflnn FiI*. ..s Scan Start: Z = , zo"Scan Start: 0 = -s' Scan Stop: Z = - Scan Stop: E = , Index Increment: 30 IChannel IAncile Serial No.-. Comments
- 5 L 0-10 4' .- ;
IN Results: .No Recordable Indications Leak Path Detected Axial F aws e ec ed Circumferential Flaws Detected Comments: -Analyzedby: b Level' Date: Z'./ -t Reviewed bty: -Level: _Z17Date: /0^'/ 4 Z-.
"TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FPAMATF'rM AINF= Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: -31 Procedure: 54-ISI-100-09 Nozzle Dimensions: (11.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.): 14 End of Noz. (in.): 0 Probe Serial No.'s: Ch i S0429CN Ch 6 n/a Ax ial s &A* n `,- ~a
*, *,S t j. g . , d 691,@ I . 'I i"",' .",S to p . I
, j'*: ".: d ec-, n aC h
______ _____~dY.'QS::ý~ Ch3 n/a Ch7 n/a Clrc. Fies: Scan Start: L A2272_07.07.46 -5deg Stop:1 -365 Cal BlockIdegSIN:
@1 Setup:[93 8.57' 60119300 Ch4 ChS nla n/a Ch9 ChlO nla n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI 2 -3 -4 -5 -6 -7 -8 9
10
-11 12 13 14 15 16 17Data Loc. 14 44 74 104 134 164 ..... 194 1224 254 284 314 344 14 Degrees 120 150 180 210 240 270 300 " 330 360 Degrees WELD Noz. Loc. 0 30 60 90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches PROFILE Noz. End 0.00 0.00 0.00 0.00 4.34 5.11 - Inches MAX. 3 15 3 65 1.49 2.3-5 -3.28 Inches MI1N, 1.13 Comments: Measured Th ickness: 0 651 @ theta of 1251 deg with an axial position of 1 2 471 Limited Scan? (YIN): 7y %,-.*j;*'~
Limi~ted scan as follows: 0 to 10 degj / 120 to 360 degl / total limitation 250 degj 31 %coveragle The downhill side of the weld was located in the limitation region. 14 degj isthe start of the scan.
-I2 __--..( ; Date: /2/o-Analyzed by: /Dae Analyzed by:
cater" &I-a P- 'ý. 9/29/0210.20 AM Noz 31 Page I of 2
Z0Z -e6d 1.1.JetO 1.£ZON Z0I6Z/6V4V 0Z":0L uo1eoiewep IIP.IUMOO I PU3 -ZOf'NM .ým 91. 1.1. 0M 6-U-- £ 9-
£ 9 9.9d 9 9 , I 9' .. "..', 9* 9 9.*;'
- seeji~ea 2> .i90rw',
.4 09 o0z 09M 00 . 9 0
- -- ----1p 00
......... ----------- ------------- i...... ------------------- -------------- ....................
. . . . . . . . .9. . . . . . . . .
..- .... 9*0 vo -------------------- ------------------ ------------------ ---------------
7,- 1
---------- 17------- 07I
------- 7----------- -------------------- ............... 97I 1114UMOCI --------------- ------------------- ------------------- ................... -------- ----
~
~n j ~ ~~ I s ~m w ~n ~ l~
*OTk ia bi - - -- - - ---- - -- - - - i i Ria iu inu ~n u u u m~!au mmm mn ! N-x 1 9. I U I 5 I 1 l' 1 I U 1 u ! u 1 mf 11 W 4IU
*9*9
---------- z-------- .................... .................... *9*9 I- - - - -- -- - -- - - -
- 0L I.................. -------------------
------------------- -0*9
.................... -0'6
------------------- ------------------- ------------------- -9*6 I------------------- ------------------- -------------------
- 0WI Tot0I O*I1 -------------------
------------------------ -----9
-OWII
'kk
- 0 ',
li9id -------------------- ------------------ I -------------------- --------------------
. 1.
',-7 ---------- ......... -------------------
------------------- -- 9
- - - -* G-
- -I--- .... 9--- ....
*O 9 . * % 9 - N 999PjflOJd LCOIZZON
Pl-AAV FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations P NO.: PQ-100-,ROCEDURE NO: 5454-PQ-100-2, 3, 4 and S Reactor Head Penetration F4XVIAXOME ANP Ultrasonic Examination D.ata Sheet Customer: "vMc Plant: ,,.' *, e-A " Unit: I Penetration No.: Procedure: 6'q-1S/-/1,9--
"i Of E ui ment:
Description VH# Cal. Due Date SN# 4Tomoscan ,z7o 71L 3 A0317 16 Channel P/R ACCUSONEX "Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version -TIT Cable Length: 5o0 Tp e: R * # Intermediate Connectors: I Calibration Block: &o//1,3z/01 Calibration Setup: IScan File No.: o,9p 72 /*;*-/. Y3 Initial Calibration File:,q,6*, - /0.-2. 30 Final Calibration File: ... o02" Scan Start: Z = .0 Scan Start: 0 Scan Stop: Z = -yo,'Scan Stop: 0 = Ys-5 Index Increment: 30 Charin I Angle Serial No. Comments Z- 6" - 3zo'-/'
- 3004!. 3 *Zo27* "I.
3 . &,,O% - s5o o
,o'5 350o2.
3 Results: e Leak Path Detected *t. Axýial Flaws Detected Circumferential Flaws Detected Comments: AnalI Date: /e0 -'-0b-eviewed by: Level: Date:
"-'TYPICAL DATA SHEET FIGURE 5 Pace 31 of 32
- 0, R.
A 6 CRDM Nozzle Ulitrasonic- 17Ymminnfinn nflnf Qhnn Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 31 Procedure: 54-ISi-100-09 Nozzle Dimensions: (i,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 49 End of Noz. (in.): 3.22 Probe Serial No.'s: Ch i 35044 Ch 6 35052 lit,_ t -;-". 4$etup:j : -~:rCh2 35202 'Ch 7 n/a Sn, Ch3 Circ. Scan 35070 Ch8 n/a Start:I -51deg @1 0 " Stop: 365 deg @L 2007' Setup: I Ch4 35044 Ch9 n/a Files: A2275_18.04.33 Cal Block SIN: 60119300 ChS 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (In.) (deg.) (in.) Ratio Orientation Mmn Max I N1 2
-3 4
5
-6 -7 -8 9
10 12 13
...14 15 16 17Data Loc. 49 79 109 139 169 199 229 259 289 319 349 19 49 Degrees WELD Noz. Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 3.22 3.22
. 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 Inches MAX. 6.48 6 69 6864 7.15 7.76 8.17 8 83 MIN. 9 29 9 29 9.14 8.73 6.89 6 48 Inches 1 4.29 4.34 4 49 4.80 5 31 5 92 6.69 7.45 7 51 7.15 16 59 4.49 1 4.29 lInches Comments: Measured Thickness: 10 631 @ thet ofl 2891 deg] with an axial position of _10491 Limited Scan? (YIN):l N I Analyzed by: DateF /-av '/%Z_- Analyzed by: A//,A Date:
65'7 1013/022:29 PM Noz 31 rotating Page I of 2
21, "; .- , . -', ,k.
'U'. .. FRAMATOMEANP " I 't", . Z ,,W.'2, 1 ' "-: -. ,, .,. , - ,
" , ,15.0u .~ ' ° o'*" ...*" 4'- ~ -"- ;' ," " " ,... . "-" . , -- -.............
14.0. ..... . ..... . ....... 1 3.5 . ... , . . ................. .. .. ...... . ..... . . .....".. I,': - 1 3.0 - .... .. . . .... . . ...... ....... .... . ... .. -..-... .. . . . . . . ..... .. ... ... ...... ............. . .. ... ,.' 2. :Z . phi. 12 .5 -- . - .... .......... .. . .. . ......... . . . . . . . . ..-.. 12.0 ........................ .... .. .. 11.0 - ... S....... S...............................i S................................ S................................ 10.5 . .............................. i.................................. S................................J 10.0 ......... ......................... 9.5 . ............................... l............................ 9.0 .....................
............................... =7ýý ..........................
8.5 .................... 4-- .............. .............. ............ ..... ............................ mw_-1 - .. ,"' 7.0 ............ ...... 6.5 6.0........... 5.5
............... [........... .............. ......
4.0 .. .........................
.5 ...... ........................... ..................................
4.5 ............-.........-......... . ... .. ......... 3.5 ........................: ............................................. l11 i........1....... !
.I. . . . . . . . . . . . . . . . . . . .
i- .............. ill I ..... bm , 2.5 3.0 3.................. 2.5 ..............
...2 :.......
- ......... I***----
Io.. .... ............... I ..
............I
....................... . I--.--------..------------.----.....
............. 1 S.................................
4............... . . .
......... L-I --- -------
ý I. ..... .
- .i...#.:.
Downhill Side 0.0 -................... ......... ... I.. .. 1.5. 0..;"-, 0.5 "
,2...
~,'.
.....:-..10 Uo*
-I- 4 '
0 ,150 200 2501, , , "
.1 * . ,
-2 -3
-5 -6 -7
- p. -9 -10 -- 11 p -13 -..... . 14 i- Noz. End 15
* ,Uphlll I Downhill demarcation 2:14 AM 10/3/2002 Noz 31 rotating Chart I Page 2 of 2
P o1/LM FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-IS-.100.09 0 PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 "A. *Reactor Head Penetration FRMA", A NP Ultrasonic Ex'amination D~ata Sheet Customer: M-/WC Plant: PoIAM, Be,,wA Unit: Penetration No.: Procedure: "q-l-/ "j Equipment: Description VH# Cal. Due Date SN# gTomoscan /7z. o ;zo3 14 16 Channel P/R W,!1 ACCUSONEX"4 Data Acquisition Software: Version,6.2.5 ACCUSONEXm Data Analysis Software: Version,3- 3.,5 1 Cable Length: 5 O0 Type: RG-'L1-A # Intermediate Connectors: I Calibration Block: 6/I.v/Calibration Setup: A2213- 0.qb. j!r Scan File No.: Initial Calibration File:.Ajj4.2%-4 A M Final Calibration File: , ZZ.... Scan Start: Z = 6.o" Scan Start: 0 = -5 Scan Stop: Z = .2-" Scan Stop: 0 = Index Increment: 30 Chan el Angle Serial No. Comments 11 6- 1- :5 Z 3 v".- 13 5"zo Z * "F.D 3 1., 35070
&eo-g 3 6 okz C4 35052.
Results: No Recordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed*by: , 6.0Date: z Reviewed by: Level: Date: /0/i / -_. TYPICAL DATA SHEET FIGURE 5 IDý\ov1 Page 31 of 32
4= A CRDM Nozzle Ultrasonic Examination Data Sheet F FtALM ATD?ME ALt%1 F3 Customer: Nuclear Management Corporation Plant: Point Beach . Unit: 1 Nozzle: 32 Procedure: 54-iSI-100 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 53 End of Noz. (in.): 3.3 Probe Serial No.'s: Ch 1 35044 Ch 6 35052 Axlal.. * .St... .. ?A ..... .I [',st,, I.' - I. g1 - . P ; ";"Ch2 35202 Ch7 n/a
. ....'-.ý, . . . -.. . Ch3 35070 Ch8 n/a Circ. Scan Start:[ -5deg @I sop1 20.07 Ideg @1 Sto," 365' Setup:I I Ch4 35044 Ch9 n/a Files: A2275_19.01.26 Cal Block SIN: 60119300 ChS 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 OD 058 6.1 131.0 6.5 143.0 0.39 78.0 90.0 0.42 \ 0.57 47 0.05 0.08 Vol 4.2 6.7 2
3 4 5 6 7 \ 8 9 10 12 13 14 15 17 Data Loc.' 53 83 113 143 173 203 233 263 293 '323 353' 23 53 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.30 3.30 13.30 3.30 3.30 13.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 Inches MAX. 6 29 6.29 6 33 6 65 7.23 7.91 8.49 9.07 9 25 8 89 8 42 6.33 6.29 Inches MIN. 3 85 3 88 3.95 4.21 49 .9 6.94 7.63 7.63 7.30 6 62 3.85 3 85 lInches Comments: Measured Tickness:I 0.635 @ theta of 12 e ih an axial position of 9 45 Linmi ted Scan-? (YIN): N In-dication #1 Is located at weld root Classified as a fab indication Analyzed by: * **Date:- /40*/ 7;7- . Analyzed by: 2112T* Date: 10/3/022:18 PM Nozz 32 rotating Page 1 of 2
JO0 SEecd 0 . PL4 BunlePo Z ZZON ZOlClOWMd tZ: UOiieaJewep lli4UMOO I lliqdnm.m.m L pU3 "2ON. 9* 6-
%7 L* 9-
, A ,, ,0 ,
,.9 . . 0. L-_.
A'-- S..... ... ,. ."..... '4.. 0"0 r,-,4,,
- 1.
- - - - - - - .-- ----- ---------- - . , '4 -
4 I , 0*"0
--- --- - - 7
. . f- ... . . .. . . . l......... . . . . .
4,~ --
------------------- I-.. . . .. . . . .' -- -- - ----- ---
III.Uepl0 -------------------- ---------
,IiIquMoo ------
------ -................... - - - ------- -OfU
- Y 9m
------------------- *-------------------- h St
------------------ ----------- -------- OT
----------- ------- ------------------- ------------------- ------------------- ----------------- ...........------- ----------- -------- 0
------------- ---------------- -------- ------------------- ------------------- ----- .. ------------------ ----------- ------- 9L*O 9'97
-------------- -- ------------------- ------------------ ------------------- ------ ----------- ------------------ ----------- -------- 0.9
-------------- - ----------- 9"9
----------- ------- L
...... ----------- -------- - ---------------------- ----------- -------- 0-9 LL
- I 333S4W S I. -r.mmwmw ww"m...--- ----- wwmwmv$,"wwA L
---------- -------- -------- 9OI
-----L -- -- -------------- ]-.. . .. . . .. . .
--------- 0.GI 99
-----------.35----- ----- ------------- -----.. -0 "1,1
- - - - - - --- --- -- - ------ ------------- 9's4
'5. -. - -------------------
4.. ------------------- -- - - -- - ---
-. -- - ---,- 4 .
'4- * ------ ----------- ----.I. ......,-.----.... G'6
--------------- -- -...------..... i- , ,O'l.
--- 4--- -
.'U'7ý
---------- ------ : --- -- *.:. Wet0"#
I POJd WI:£eZZON ,, ONV a*o.vwvivz
,1'5
.5 r *1 44
I re Pu.: r'.i-'UU-1, D4-tLJ-1 UU-Z, 3, 4 and 5 I A "Reactor Head Penetration 1RA4WATME-* A Ultrasonic Examination Data Sheet Customer: WMC Plant: + - I*..Unit: '. Penetration No.: 32- Procedure: 5q- I-/5eO-0D'i [-qUlJJi&lICL, Description VH# Cal. Due Date SN# gTomoscan -1 zo-*q 16 Channel P/R IN /A N1 . /A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX_ Data Analysis Software: Version . Cable Len th: G0 Type: I?&- -4n-q # Intermediate Connectors: I Calibration Block: *(,ol I q3 E/l Calibration Setup: Scan File No.: A 2272- 's- .4a:J Innitial Calibration File: A.~-'.' Fnal Iq~it!'. Calibration File: c,1ý*, v~ PE Oam Scan Start: Z -7' Scan Start: 0= Scan Stop: Z =S7Scan Stop: 0 =-74-r Z73.9j Index Increment: 3-Channel Angle Serial N'- . Comments I 5"0j,. 5o,./*qc:N Results: -ordabl Indi Leak Path Detected
- Ial Flaws Detected Circumferential Flaws Detected Comments:
Reviewed by _ Level-
- Date: /*z/*-_
TYPICAL DATA SHEET FIGURE 5 69-30-02-, Page 31 of 32
R A IAZrcM AN1 CRDM Nozzle Ultrasonic Examination Limitation Sheet Customer: Nuclear Management Corporation IPlant: Point Beach Unit: I Nozzle: 3Z. Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch i Ch 6 n/a O~fare- ~k~ ~~ _____ ' h n/a Ch7 n/ ME1 flva-1 M W ~~'Ch n/a C8n/a Circ. Scan v Start:[0 deg @L._...J" Stop:1/6/oj9_Ideg @I j' Setup: 3 Ch4 n/a Ch9 n/a Files: A7Z.T272 -13, .1I.0.l,*j6 .'ZO. q Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Acquisition Instructions:
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred. For example, current limit activated, probe stalled on upward stroke, rotational stall occurred.
1 -S+opped XC~j ,r 141-370 dy. 4-p 66'n t~ckbl_ -to !T-, vgzsa gtij 2.2' 2 WAS /WUO UIV~hLd 'ro Aecav. A9gri ~W~l ~ T~ p~c j~ r~~ 3 C-V OP ~b WS 4M7cJ-kM'J& <,A) -rM5: /--V 6r -7WL- EyN.E" 4 5 7 9 10
- 11 12 13 14 15 16 17 18 19 20 21 22
-,ired By:e~av 6 9 Date: 91Z) 2-9/2 I PM LinSheet le 1 of 2 F* 'N*,-C4
KC)t4ýý /V 7. FRAMATOME-ANP Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 509i
.A Reactor Head Penetration SFRU IM C- M P Ultrasonic Examination Data Sheet Customer: NMIC Plant: PoT,',.i &*A Unit: I Penetration No.: _T7 Procedure: .
Equipment: Description VH# Cal. Due Date SN# gTomoscan jz.7o T o317F 16 Channel P/R u/A ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3--a'7. IV Cable Length: Sol Type: R.,- 12A # Intermedi~te Connectors: I Calibration Block: "4e// 3DO/I Calibration Setup: Scan File No.: ,,P'2 *I--,.. ,. ' Initial Calibration File: q 22z c- - ,-. 9'. X
-R,* .-
V:.
/"Final Calibration File: Az-7.-_'=ZiZ.. _'7.o-"
Scan Start: Z = c, Scan Start: E =-s- Scan Stop: Z = 20.07 Scan Stop: 6 =.Ti'" Index Increment: 30
-Channel Angle Serial No. Comments 6 ° .35oq 3 - &.05 ss5oo Results: -No-Recordable Indications- Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed b: - Level: Date: lO-2 ;z -e7 Reviewed b :, Level: Date: /O-/'. "* TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
.A CRDM Nozzle Ultrasonic Examination Data Sheet "-.3 Customer: Nuclear Management Corporation Plant:- Point Beach Unit: 1 Nozzle: 4 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 176 End of Noz. (in.): 3.36 Probe Serial No.'s: Ch 1 35044 Ch 6 35052 L110prd; Iý =""~; do ! 1ýtP ~4i 1 Y.'.eg'J. Ch2 35202 Ch7 n/a P5a4 ?V*' ~ J Ch 3 35070 ChB n/a Circ. Scan Start: -51deg @I j" Stop:1 365 Ideg @1 20.07j' Setup: [ Ch4 35044 Ch9 n/a Files: A2275_19.56.05/_20.17.24_20.51.24 Cal Block SIN: 60119300 Ch5 35052 ChI0 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (In.) Ratio Orientation Min Max I NRI 2
3 4 6 7 9 10 11 12 13 14 16 17 o Data Loc. 176 206 236 266 296 326 356 26 56 86 116 146 176 Degrees' WELD Noz.- Loc. 0 30 60 90 120 150 160 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 Inches MAX. 7.04 7.09 7.61 8.34 8.14 7.49 7.09 7.98 8.14 7.73 7.33 7.04 7.04 Inches IMIN. 14 57 4.61 5.30 6.44 5.83 5.14 4.86 5863 6.03 5.55 5,10 4.78 ý4.57 Inches Comments: Measured Thickness!: 0.67 theta of 330 deg with an axial po.sition of 8.881 Limited Scan? (YIN): 1 N 1 Anayzd b :-_7 Date: ,* - ".-Analyzed by: %J4 4* Date:
- 10K* I1AM Niabng t&
IV llbl"%- I of 2
4-c N-~ RAMATNIE AMIP I',;No 1ke33 P. file"fJ - - i ~ hl~:t7
; 145 1T 1----
.... S 1...
11.5 ..... .............
...................-------- --- . . ~r~ .......
.......... .. ... .... - ........ I ..... . ..... ........ .............
.. t -
-...... . -- ~- 1 -------..
.,,*',.125 .............. .. .....- -- .................................. . ..................
... .......... ... ....... ........... .......... . .. ... . .- * .. Uphill
.. A.. 1 ..
................... .......... ....... ... ..... Side 4 .............................. ..... -.......-.................
1 0 ... .... ... ......................... ........ 1095 .---............................. ............................... ................................. 8.0 ............................ ................ ..................... .... .... ............ ... ...... ......... .... ... ..... ....... .. .. .... .... .. .... .................... ........
'11 0 ............. ........ .............. .. .................... ...... ...... ......... .................
10.5 . ........... ................... .................................
. i ............ ............... ....,............. ...... ............ .................. ;...... ....... .. .. .... .... ................
8 ..................................... . . . .I 7.5 ...... .......-.-....... ...... ....... ........... . . ........... ...................... 7.0 ................................... ...................... 6.5 S......................... -- -- ------- ---------- . ...... .... .......... ........... ..... ........ ...... ...... .... ..... ................... ........ ........ .............. ................... ........... ...... 6.0 . 5.5 ............ 5.0 ................ 4.5 ......................... ..... ....... .............. ........... .............. 4.0 -------- ------------------------- .......... .............. ........................ ........... . ............ ................. ..................... ......... ...... ... ... .. ........ ....... -------- --- ....... 3.5 Y S
--- i ________ h t - L 3.0 2.5 _._........................ ........................... ....................
..... ...... f..............
I--- p-Downhill 2.0 'I\.
......... ( ....................
.. . .--- I .................. I... ....... ----- --- - ---..---- ----- - ..-.- I.-.---..-..-
.. . .......-.. .---------....... t7. ........ - ...........................
i-r I j- S ,o u .-. : 150 1o -'200. 259 -300 A0:U 0 350 400
-1 -- 2 -- 3
-5 -6 -4 8
-9 -7
-10 "--11 12
- 13 14 -15
-- =Noz. End m 16
--- 1
" -- Uphiil I Downhill demarcation 2: 2002 Noz 33 Chart 1 .2of 2 VV: 41,
rW Nu.: rW-iuu-, 04-rU-1uu-z, 3, 4 and 5 "A* Reactor Head Penetration PFRA*'- MC P . Ultrasonic Examination Data Sheet Customer: NJrM CI Plant: . &:,-.kUnit: Penetration No.: -- ]Procedure: 5'/- /SI- /oo-o Equipment: Description VH# ' Cal. Due Date SN# gT om oscan "" E T, i.A*' 16 Channel P/R N/A 1N 1A ACCUSONEX Data Acquisition Softwaie: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3-T. Cable Length:- -O TvDr- tPz- n-a !4 1 Calibration Block: (.0/o/1,30E& Calibration Setup: 4 ZZ 2.i14' Scan File No.: Initial Calibration File: A Ve low Final Calibration File: t.,J-r j , Fj-1. Scan Start: Z -. ,7' Scan Start: e= -- Scan Stop: Z = ".S-Scan Stop: e= .7Z.57 2 Index Increment: 30 Channel Angle Serial No.--:ý Comments I 50j.. :5oL-! Scr4* Results: ecordable Indications: Leak Path Detected cted Circumferential Flaws Detected Comments: Analyzed by: Level-! Date: ' 0-. Reviewed b:. Level: Date: lel/*9,-z.._ TYPICAL DATA SHEET ,4 ao9-c,, AZ-1-.2LS 17. 10. FIGURE 5 S- va -Ze-.
- i-. 3jt. ZL Page 31 of 32 17 14.* . 03
- f 5 q. 1.
-- . 7* '*
S A CRDM Nozzle Ultrasonic Examination Data Sheet F R-A M Ar~PA~r-a Mt Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - - Nozzle: . 33 Procedure: 54-ISI-100-09 INozzle Dimensions: Oin.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deig.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch t S0439CN Ch 6 n/a I @ I IdoS1 Setup: I-;-. Ch2 n/a Ch7 n/a Cic cn Sat - e h n/a ChS n/a Cir_. Scan Sjart:l jdeg @1 -0.7 I" Stop:I -365 jdeg @1 856i" Setup:[3 Ch4 n/a Ch9 n/a Files: A2272_15.10 021_15.16.06/_15.2828/_15.34 26, Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (ID/OD) Flaw TIp (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI *.m il i S2 ' 3 4 6 7 ; 8 9 10 11 12 13
...14 15 16 17
~~~~ 0 Data 5Loc. 30 160 ~
90 ~ 120 150 180 0____ 9___
. 210 1240 270 1300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 1240 270 300 1330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 10.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. Inches MIN. Inches Comments: Measured Thickness: 0 624 thet of 126 deal with an a-'a poiino 6 Lmited Scan? (YIN): y*l~
Limited scan as follows: 0 to 5 deg /199 to 118 degj / 134 to 360 degl / total limitation 254 degl. Axtal limitation is located between nozzle end and weld toe. 3 %coverage The downhill side of the weld was located in the limitation region. 4Date: Analyzed by: 9 /*. I 7 - Analyzed by: o4 1,4 Date: 9/29/028:33 PM Noz 33 Page I of 2
'A ARf.7lVt l.
CRDM Nozzle Ultrasonic Examination Limitation Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 33 Procedure: 54-1S1-100-09 Nozzle Dimensions: (1n.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.): 0 End of Noz. (In.): 0.17 Probe Serial No.s: Ch I Ch n/a Y`4
.F%14. N N~____ Ch 2Sn/a nla Ch Ch77 n/a
~~.i'iiR Ch 3 Cire. Scan Start: ._Jdeg @1L_ " Stop:l!35.,//Ideg @1 [ " Setup:1 3 Ch4 n/a Ch n/a Files: A.Lzz. o315. lt.-
1.i0.3o /M*.ZY.**' I.*/ dji.Cal Block SIN: 60119300 Ch 5 nla Ch 10 nla Acquisition Instructiohs:
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred. For example, current limit activatd, probe stalled on upward stroke, rotational stall occurred.
1 -5+.vVC=b -A,V £-JO-MN Ate~ ,*,eA1" 7t, -, vHT " Aýýa -yir4,jf "iTPJ de'rTjecv.;- ud Q. ,*-" 2 ="-RH r- /-MeWn A)07 /IILG- '-,Q &5 5CNVer) 7--73 "4 -AA) 10off - //9" ,-W Tkle-SC CflA5 4 5 67 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Acquired By: *a *..*h * ..* B* "*. "[* Date: o Z-9129/0212.21 PM Limitation Sheet Page 1 of 2
ko1L47AJ FRAMATO ME-ANP N'ONDESTRUCTIVE EXAMfNATION~ PRoc.=rlp*= Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-41S-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A'Reactor Head Penetration
,FMAATIOMAIUL Ultrasonic Examination Data Sheet Customer: "MJrC Plant: Po, Bew-A I Unit:
Penetration No.: 3q Procedure: 6-q-/Is/-6-aOf Equipment: Description VH# Cal. Due Date SN# LLTomoscan -/7o -2L1 7" 3 ;Zo31: 16 Channel P/R ,,, /N ACCUSONEX` Data Acquisition Software: Version 6.2.5 ACCUSONEX" Data Analysis Software: Version.-%315"* 3. 1 Cable Length: 5 o0 Type: lZ.,- A # lntermedi~te Connectors: I Calibration Block: (.// 3VD0/ Calibration Setup: 3" Scan File No.: Initial Calibration File: A ZZ(,.Z- 0. Z6. 30 A2 z &'.5-//. o(.-30 Final Calibration File: A -L.r. 6s'.)1.7 Scan Start: Z =o.. c-/ Scan Start: 6 = 0.O Scan Stop: Z = I/5"j Scan Stop: 8= 3*5 Index Increment: 30 I Channel I Angle I Serial No. Comments I Cm nts w 1 J 1L --2 , 0 -
->/
1 7- 1 30,11- 1 352.oz I -r D 3 & 0"-1-357 5" (.,f 3 o5.7 Results: ('No Recordable Indications Leak Path Detected Axial Faws Detec eCircumferential Flaws Detected Comments:
-7Ai "v AW ~-'/
M.11-r 00;-W~
- 4. POAaA,% - "
Analyzed by: Level: Date: /0/3/ -z IReviewed by: 4ý2 . el*2 Level: 2ZYý Date: /// 0 -z-TYPICAL DATA SHEET FIGURE 5 vA0;0 I~V Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Ilafa 5Rh*A Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 34 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 118 End of Noz. (in.): 4.06 Probe Serial No.'s: Chli i tti". 4i* de _ _, tujI *.* *, Ch 2 35044 35202 Ch 6 Ch7 35052 n/a
.. .. ,., .~. . . , Cb 3 35070 ChB n/a Circ. Scan Start:I -51deg @1 0.47 " Stop:I 365 Ideg @1 15.141' Setup: 1 Ch4 35044 Ch9 n/a Files: A2265_11.06.30 Cal Block SIN: 60119300 Ch5 35052
- Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (In.) Ratio Orientation Min Max I NRI 2
3 4 5 6 7
- 8--_ _ _
9 10 , 11 12 13 14 15 17 Data Loc. 118 148 178 208 238 268 298 328 358 28 58 88 118 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 MAX. 7.36 7.66 8.29 9.26 10.24 4.06 Inches 10.00 10.31 10.54 11.00 941 8.37 7.66 7.36 Inches MIN. 5.00 5.11 5.45 6.68 8.55 8.25 8.52 8 89 9.45 7.09 5.71 526 5.00 Inches Comments: Measured Thickness: 0.65 A thetaof 112 deg with an axial position of 1481 Limited Scan? (YIN): n
- Need To review the fabrication drawings for repair areas. Locations above compound weld area has rectangular dropout. Possible remant from repair region S/', Date: 3o _ no Analyzed by: Date:
iPm 4 1 of 2
6k.
- I FRAMATO'E ANP Nozzi6 34 Profile (rescan):. - F,'
* - -- .7.
15.0 - r
+/- F
'2
- r 14.5 . ..---------
.. .. -------------------. ------------------- ------------------ 1/4F 14.0. r-------------"....
r ....
------------------- ------------------ 4---2............. --------- ; .... ..*. - F 13.5 7 -------------------; -------------------. ------------------ ------------------
13.0' ------- --- --- -- -------------------. ------------------- ------------------ J---: . . . . . . -----
' I...
F 7 jF k' 12.5 12.0 --------------------- 11.5 r------------------- t-------------------
-- 2J_:...
<g5X Uphilit
,SIdb-g.
-. F FF 11.0 -- -- ------------------
10.5 ------------------ -- 10.0 ------------------ ----- 9.5 ---------- 9.0 -- ------- -- -------------------- 8.5
...... t ----
7--- j ~~n S........... PWJP.~flF~~fAFJIFm-i~Fi I ...... FIFVF~PMNij.i~iII
------------------ ýk rtFnJFJe~JJF
--- I FFJ I
I I'!"! 8.0 ------------------ ----- -- -------------- ------------------- ---------------- ------------------- -- ------------- e- 7.5 ------------------ --------- %r - ----- ............ 7.0 ------------------ ------------------ ------------------ ------- ----------- ------------------- 6.5 ------------------ 6.0 ------------------ ---------- -------- I------------------ ------------------ ------------------ ---------------- - ------------------- 5.5 ------------------- ------------------- -------------------- ------------------ --------------- 5.0 ------------------- ------------------- ------------------ ------------------- ------------------ 4.5 -------------------- -------------------- ------------------- ------------ ------ 4.0 - 1 1 1 3.5 ------------------ ------------------ ------------------ ------------- 3.0 --------- I---------ý:- ----------- I------- ------------------- 7' 2.5 ------------------------- -------------------- ------------------ --------------------- Downhill 2.0 ------- 7------------: -------------------- ------------------- *. --------- .
- -7
-, " f Side, 7--------
1.5 --- ------ ----------- ---- - - - - - ---- --------- -.-
--... ------------ i ----- - - -- - - - -- -- -
1.0 --------------------- ------------------ ------------------ : ------ ------
---------- . "-------- --- .. . .. . ... ----- 7, 0.5 --------- ................... ._ , ---------- 77, 0.0'
-0 50*~~
3/40:- .150,"., 200'
'250 "300." > 356 Dogrees
-2 --- 3 -4
-m 5 -6 7 -8
, 9 -- 10 -- 11 --- S.1.1612
- 13 - 14 15
'-- Noz. End . .,*ta I "'= Uphill I Downhill demarcation A
2:02 PM9/22/02 Nozzle 34 rescan Chart 1 Page 2 of 2
i I I AOY*LA7ýV FRAMATOME-ANP Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-iSI-100-09, PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5
.A Reactor Head Penetration MZU4AO-M:. AMP Ultrasonic Examination Data Sheet Customer: /,mc Plant: Fou,,., BS a Unit: I Penetration No.: _p , Procedure: gel- /S/- /00- -Of Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan fz- - 7 o.3 Ao313 16 Channel PIR N 1A ACCUSONFX'm Data Acquisition Software: Version,6.2.5
.CCUSONEX "Data Analysis Software: Version 3-_5- ?- , 6" Cable Length: 5O1 Type: f(.,- 1+A # lntermediate Connectors: I Calibration Block: 6o//93DO/ Calibration Setup:
Scan File No.: 4'24 ooS/-*2? Initial Calibration File:2z.,_.zs'.? 4 ;2Z6 ' /. o.' Final Calibration File: A .- t. -_os-. if.77 Scan Start: Z = ! 97> Scan Start: 0= -- Scan Stop: Z = l.Y' " Scan Stop: = .. J' Index Increment: 30 Chanipel Anqle Serial No. Comments
.3 C>'1.- "5 z5o z - FL>-
3 &Os 3-50?o 005 3So5 2 Results: QNqo Recordable Indications Leak Path Detected / Axial Flaws Detected Circumferential Flaws Detected Comments: , _ ,- , , , , I; 1 g.r" 6'TYPICAL DATA SHEET FIGURE 5 )ýA Page 31 of 32
A UJdLd *,.IIUCI. Customer: Nuclear Management Corporation
*,*r -
Plant:
-*.,II*i..I
* .t, .lg Il U'*l' Point Beach*
.oc-A lIEIIIIaLIUJII Unit: 1 Nozzle: 35 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: - 0.625 Downhill Side of Nozzle (deg.): 196 End of Noz. (in.): 3.94 Ch 1 35044 Ch 6 35052 AxiSanla I ' Ideg deg. ,:, I;, Sto:., . Cet 3520 h7 na!1, SCh3 35070 Ch7 n/a Circ. Scan Start:[ - deg @1 47 Stop:I 365 Ideg @1 19' Setup:l 1 Ch4 35044 Ch9 n/a Files: A2266_00.48.29/A2266_01.31.03 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (In.) (deg.)
.. (in.) Ratio Orientation Min Max I NRI 3
5 4 5 6 7 8 9 10 12 13 14 15 16 17 Data Loc. 196 226 256 286 316 346 16 46 76 106 136 166 196 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 Inches MAX. 7.35 7.64 809 9.00 10 02 1071 1097 10.93 1023 933 8.42 7.72 7.35 MIN. 4.97 5.13 575 Inches 6.76 8.10 8.96 933 9.12 8.50 7.19 583 5.22 4.97 Inches Comments: Measured Thickness: 063 @theta of 105 deg with an axial position of 11.481 Limited Scan? (Y/N): N Analyzed by: , Date: 9-- 720 - Analyzed by: AJ /4 Date: 9/23/029,33 AM 9/2/02.33AMNozzle 35 Page I of 2 Page 1of 2-
Z Jo Z a6ed I, Mo43 SE IlZZON WO/f2IGV'V WS6 uoieoJewep Il!qUM*OG / ll!qdnflunn,.i pUBJ'ZONfJ.... K. - VV 9- 6-
-LI' I ---- 9 I 1
- - -- - - --- ------------' - -- - - " 9 0 VV-VpFV,V :'4t
- -- &;;...,.7...o] ..
... ,- ; .- . . .-4V.s .. .. .. os_.!
.... - .- -. ..- .- .-- . . .. .- . - . - . ---- .. . . . . -.. OSL, -.- --. ------ - - - ---- -." .....
0"p
---------- V----- -- ------------------
Il V' VVOV ----------- V --------- ------ *V*
--------------------------------------- ----------------------- 7-----
0"9' jot OTA V------------
... ... ... ........... ..... ........ ........- O'-/I.
V 9-. VVVtV V VV 4
*V.'VVV2V.'VV\.VJV 3*
i:.: opi *e
' *, . VV . ..Vt- "V.. . .. .. . .. 0" V:V,, , " VVV; V.".-V'V: V .V V. V '°
- dNV3V~~~IOVVM Vt 2.tt A.'
(
kOIZVIV7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE
)Remote Ultrasonic Examination Of Reactor H-ead Penetrations I PROCEDURE NO.: 54-IS1-1oo-09o PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
.*Reactor Head Penetration F=*A*,vIATO?.'!AMP Ultrasonic Examination Data Sheet Customer: NMC Plant: Po,,,,,,A Ie..,
Unit: Penetration No.: 3(0 Procedure: 6yqj'.-1,-4i-O90 Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -/z.7 o .,o3 16 Channel P/R A-'M ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX mData Analysis Software: Versioný S-3. Cable Length: 5So Type: R.,- 3-ý # Intermediate Connectors: I Calibration Block: "6opil3D0/ Calibration Setup: 4Z*;-,Z,. g. Scan File No.: Initial Calibration File: A g
,4 7 (z* ".2 *5- 5 Final Calibration File: AnZs% 6 - oi-.. .37 Scan Start: Z = 0 .'q7 Scan Start: 0 = -5 Scan Stop: Z = I' Scan Stop: 8 St,7 Index Increment: 30 Chanr*! IAngle Serial No. Comments Z "1-1 -. 5 .o 2. -oF= D 3
,q
- &Os vz.I'g-35oO s so qt To dOse 3oC', .
Results: No Ecordable Indications Leak Path Detected I. Ax-mae Flaws Detected Circumferential Flaws Detected Comments: Analyzed-by: Level: Date: 9 ZZ'6, Reviewed by: .Level: 4iL Date: 16/K _ I,/ - I-.- - TYPICAL DATA SHEET FIGURE 5 jP *,- 23-l-- Page 31 of 32
0 FRAMATOM Customer: nmý ANI= Nuclear Management Corporation C....N... l. *UltrUnn V F~mglln, el I *i Plant: Point Beach fUluL Unit: 1 Nozzle: 36 Procedure: 54-ISI-100-09 INozzle Dimensions: (fh.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dedj.): 350 End of Noz. (in.): 3.9 Probe Serial No.'s: Ch i 35044 Ch6 35052 Axial Sc~anL., t" .. ,= , __-_,___- _d_____:-top. . _Setup: Ch2 35202 Ch7 n Files. , " - ' . .. *" -" -' ., ' - , Ch Circ. Scan Start: ..-5Jdeg @ 0.47
,9" Stop:I 365 Ideg @1
- Ch3 35070 Ch8 n/a 1s[ Setup:[- 1 Ch4 35044 Ch9 n/a Files: - A226517.52.55 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 2
-3 4 -5 -6 -713 __,_ ____._ ___,\ - .. _ _ _ __ _ _ _ _ ,__
8 9 10 11 12 13 14 15 16 17 Data Loc. 350 20 50 80 110 140 170 200 230 260 290 320 350 Degrees WELD No. oc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3 90 3.90 3.90 3.90 3.90 Inches MAX. 6.74 892 892 9.41 1000 1037 10.44 1013 916 8.13 7.27 6.70 MIN. 6.74 inches 4.45 7.09 7.12 7.71 8.35 883 8 83 840 7.38 6.13 5.11 4 56 4.45 Comments: Measured Thickness:I inches 0 63 @ theta of 93 deg with an axial position of 10 3 Limited Scan? (YIN): n I Analyzed by: Date: 717- 7o, Analyzed by: Al/A Date: C-, i 9/22/027:58 PM Nozzle 36 Page I of 2
AW,
+: . t+-' .4141 3/4:- it- -' '3-6 P~ ro Id '
FRAMATOME ANIP , .- , -' I 105' 14.5w
+;..*.':..: .:_% ,. .*........... ...................
14.0, 13.5 13.0 12.5 ------------------
-------- 4--- ---- L .......... .
12.0, --- - -- - -4 -- - - - -- - - [EE t,1,11 ,-
------------------ -,. ................... ......... I -----
11.5 11.0 10.5 46 h' .S - 10.0 ......-.- -------------------- 9.5 --------------------- ---------------
------------- L-----
9.0 .............. --- ----------- 8.5 ---------- ---um oat" UVIMA Q SUM
' 8.0 ------- ------------- ----------------- -- - - - - - - -- - - -- - - - - - - - - -- - - - - - - - - -- - - - - - -- - - - - - - - - -- - - -- - - - - -- -- - - - - - - -- -- - - - - - - - - - - - - -- - - - - - - -
7.5 - -- - - - - -- - - - - - - - -- - ---------- ------ ------------------- ------------------- ------------- -- - - - -- - - - - -- - - -- - - - - - --- - - - - - - - - - - - - - -- - - - - - - 7.0 .. ......... ................. H --------- ------------------- ------------------- ------------------- ------------ 6.5 --------- ------------------------------ ------------------- ------------------- ------------------- --- -------------------------------------- 6.0 ------- --------------------------------- ------------------- ------------------- ------------------- -------- --------- ----------------------- 5.5 ----- ----------------------------------- ------------------- ------------------- ------------------- -------------- --- ------------------- -- 5.0 --- 4.5 4.0
- ..:--,-7 j-----------
L 3.5 -. --I - - - - - - - 3.0 --------------
-- --- L----
4- 'Downhill 2.5 ------------------ -------------
-c Slde-
.......... 1
.1 2.0 S --------
K-..' . .*+.. . -'.'
------------------- -- ---- -- -- - tV' ,
"4.',5 7 -o
-- ---- - ' ----.-- '-1,
*'. '1...+_. . ,,.' .
* - -u%
'4 -?0,. --------- I-- TOO " ., 4 0 0 ' .'. 4,. 4 4 eJ i' 4 - .. ' 4 ~t
-,' ,+1:
14
!--- .5 -6
-3 7
"9 10 11
'13 -...- 14 15 m-f-""Uphill / Downhill demarcation Noz. End 1
11:15 AM9/29/02 Nozzle 36 Chart 1 Page 2 of 2
I P0,11AAN? FRAMATOME.ANP NONDESTRUCTiVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations NO PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 4 Reactor Head Penetration FP4kUA-T E ANP Ultrasonic Exarfiination Data Sheet Customer: Ntwc Plant: Pwvr, B..A 1 Unit: I Penetration No.: Procedure: </2/-/ .- 9 Equipment: Description VH# Cal. Due Date SN# gTomoscan $vI -z7o3 16 ChannelP/R 1 0A i -s/A "/A ACCUSONEX" Data Acquisition Software: Version Q.2.5 ACCUSONEX'm Data Analysis Software: Version .3q-0 (9 . Cable Length: 560 Type: lZG +A # Intermediate Connectors: I Calibration Block: 4NI/I3DO/ Calibration Setup: 1Scan File No.: Azz&.- . Initial Calibration File: q}ZZ,,z- /b.;S.3O Final Calibration File: A- 2-zX6-o.-s' ). .7 Scan Start: Z= 0q.wl"Scan Start: e=-I5 Scan Stop: Z I'V"Scan Stop: a 3(. r Index Increment: 30 ChanrnI Angle Serial No. Comments 1 6" /. Z 3*O0I- 135z2oZ TOFD 3 &-SO -35 o70
" .d5*- 3 orz 50 52.
36 Results: -Ilo Recordable Indications, Leak Path Detected
-- ial Flaws Detected Circumferential Flaws Detected "Comments:
Analyzed by: evel: Date: 9 LZ
-Reviewed by 4- Levelr' -- / Date: 6'/~~
TYPICAL DATA SHEET (k 6 ,,1-3b. v FIGURE 5 PFage 31 of 32
-'I A
Customer: Nuclear Management Corporation ..... S. flMI .. l ssa. Plant: Point Beach c .u L..AcIIEEI
-U EULIUII
".-a. U" L LJOLO Unit: 1
.JiiL Nozzle: 37 Procedure: 54-ISI-100-09 INozzle Dimensions: (4n.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (degl.): 0 End of Noz. (in.): 3.83 Probe Serial No.s: Ch 1 35044 Ch 6 35052 Axial Scan' -.Start:l. deg..l@Its, -. , - Ideg, @[ " , ',Setup:lL Ch27 h n/a Flies:' . . . . .- ,. , -h . .... ch3 35070 Ch B n/a Circ. Scan Start: =J5deg @ 0.47 " Stop:I 365 Ideg @I "9. Setup:[ I Ch4 35044 Ch9 n/a Files: A226514.03.14 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 nl/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 2
3 4 6
-7 9
10 11 12 13 14
'15 16 17 Data Loc. 0 30 60 90 120 150 180 210 240 270- '300 330 360 Degrees WELD Noz, Loc. 0 30 60 90 120 150) 180 2:10 240 270 300 330 360 Degrees PROFILE Noz. End 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.93 3.83 Inches MAX. 7.60 9.35 9 54 9.73 10 21 10 54 11.11 11.00 10.64 9 74 8.78 8.02 7.60 inches MIN. 5.41 7.12 7.17 7.69 8 07 8.55 19.35 9 35 8.74 7.60 1646 5 89 H .41 lInches Comments: Measured Thickness:; 0 63 @ thet of 1 2121 deg!with an axial position of 13 28 Limited S'can__(Y/N): n I.Analyzed by: r--"Date: t? /ZZ../a.Z Analyzed by: ,j,, Date:
6' 9/221024 08 PM Nozzle 37 Page I of 2
V'.' Nozzle 37 Pir'ofile ~ FRAMA-TOMrE ANP Il 14.5 ---.- ------'--- _;_ --... 14.0 -----........... I t 13.5 ------- -------. .. 1---- ---------- ---------.... ------------------ 13.0 ----- - - - ---- -- -- - - - -. ------------------ ------------------ ------------------ ---------------- U hill c,' 12.5 - ------------------..
------------------ ------------------ Side',
iiiiiiiiiiiIiiii 12.0 -- 11.0 -------------------- ii 11.5 -- -- - - - - -- - - - -- - - - - -. -------------------
--------------- W--
- W..................
10.5 ------- ------ ------- ------------------ --- 10.0 ------ ---------- I'll ----- -------- 9.5 ~ 9.0
.ma"MIUM11"lmMUMmo
----- ---------- ---------------- ------------------ZZI ----
4~C~~4 - S........................
.u4mL,~4j4~u. b,.4.i
.,'~..,.,..
......... *lqq*qq*U*
U N*]iEIN*UmmU*M* WOMOMMUqý U] Im 8.5 --------- W-- ------------------ --------------- ------------------ ------- - -- U- .. ------------------ . 8.0 -- --------------- ------------------ -L ------------------ ------------------ U 7.5 ------------------- ---------- ----- ------------------ ------------------ ------------------ Ný- ----------- 7.0 ---------- ------- -------- --------- ------------------ ------------------ ------------------ -------- -------- ------------------- 6.5 ----- ------------------ ------------------ ------------------ ------------------ ------------- ---- 6.0 ----------------- ------------------ ------------------ ------------------- ------------------ ------------------ :ýý 5.5 -------------------- ----- w------------- ------------------- ------------------- ------------------ ------------------ 5.0 ------------------- ------------------- 4.5 - -------------------- r------------------- t------------------- 4------------------- ------------------- 4.0 -------------------- ----------------------- -------- w------- --------------- -------- - - --------------------------- ---- - --- *1---
- 3.5 ...................................... ---... - ------------...
3.0 -- - - - - - - - -- - - - - - - - - --- - 2.5 ------- ----------------- Downhill 2.0 -- - ----------- - -------------- ------------------ Side 1.5 -----
..---.-.. . --------------- ------------- W 1.0 - ---- -- :- .. ---- ---.. ------.
.. ----- ----------- --.. -------- ------ t. '4 ,'
0.5 ------------- -- ---------------- ---------- --------- -------------------- 2- -. 0.0 . f -t
, 00 . . ... ,~, 0 . . . , " 100 150 200 250,'-- 300-Degrees
-2
*7
-4
-6 -8
-9 -10 U- 11 --
-13 14 15 S..1612
- -Noz. End .,saa.a1 """"l H " Uphill Downhill demarcation 4:08 PM9/22/02 Nozzle 37 Chart 1 Page 2 of 2
c'gC FRAMATOME-ANP riut-'ItuLIvJ u.XzAMI TUrN PRUOEDUURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-1So-I 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration rR.4Aut= mAAmP Ultrasonic Examination Data Sheet Customer: W MY*C Plant: )e,.k
-,e Unit:
Penetration No.: ?g Procedure: 5/- is,-./oO-i Equipment: Description VH# Cal. Due Date SN#
.Tomoscan &/*./o3 qo14q 16 Channel P/R N /A NI,AA ACCUSONEX"" Data Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version .
Cable Length: Go' Type: /.- ;,-q # Intermediate Connectors: I Calibration Block: (.o/J13oe/ Calibration Setup:
'Scan File No.: 7:,; 7, *7i ,- . Initial Calibration File:4,'2C&_/I. 2 *. 99 Final Calibration File: c o,..riwivCt prrz-mHA Scan Start: Z = - " Scan Start: 0= -s- Scan Stop: Z = S*.5 Scan Stop: 0 =..° Index Increment: 30 ChannlI An le Serial No. Comments Results: <o-Recnrrfnhl. Indi pn~ss Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
MAnnalyzed by: * .... __Level: 72ý Date: *. ,'-*-. ,Reviewed by: Leve TYPICAL DATA SHEET b FIGURE 5 Page 31 of 32
Ack CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 38 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 36 End of Noz. (in.): 0.43 Probe Serial No~s: Ch I S0420CN Ch 6 nla Scanl.. ~~.. Axial S.... ,.
;t,ý Start:I-,, ',d .,. I.sop; ,."Ideg @ '%...t" Setup: I Ch2 n/a Ch7 -n/a
~ . \ : ~~ u.. ~ .. ~Ch3 n/a C8n/
Circ. Scan Start: deg @L-5 -07 " Stop:I 365 Ideg @1 5.98' Setup: 3 Ch4 n/a Ch9 n/a Files: __ deg_@___ ___ Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface10C to Min Min Max Max DM__ Nozzle_ TotalUltrasoni Min Max Examination Total Length DataShee Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI._ 2 3 4 5 6 7 8
-9 10 11 12 13 14 16 17Data Loc. 36 66 196 126 156 186 216 246 276 306 336 6 ,36 Degrees WED Noz, Loc. 0 30 60 90 120 ISO5 180 210 1240 270 300 330 360 Degrees PROFLD by:_______Noz. End Anlye 0.43 0.43 0.43 0.43 0.43 10.43 0.43 0,43 0,43 0.43 0.431 0.43 0.43 Inches POIE MAX. 3.12 3.15 3 29 3.44 3 68 3 82 3 87 3.84 3 71 3 47 3 26 13.18 3.12 Inches MItN. 1.81 1.93 2.06 2.31 2.47 2 .59 2.7'0 2.62 2.41 2.17 2 00 11.90 1.81 Inches Comments: Measured Thickness: 10.63 theta of 191 deglwith an axial position of 4. iited Scan? (YIN): N Analyzeby ,*"J* P Da te:T ,- -,70 2-.- Analyzed by: i- Date:
/ t4 01.2q.0-L Noz 38 P5age 1 of 2 9/24/028:34 AM
6C ZON Z0/IrZ;/61/NV 1V:8 Z 10 Z e6ed J 1e4O At 21 uoj1eoaewep IIJqumoQ / IIlqdn'l,,,,.,, PU3 "ZON m-,,.. '
'I L OL 6 cL 9- 9-
I 9m
,' 4 O *,,
'44
* .1/4 ',.V /~ "4 - 4 .4 , C'::,
.. . .. ", .r,' .
,09o OS0l,,.
og', - . ,, ,00 4-: 40"0
- i I
I 4-1t 0---- m----- - -..
-' GLZZ ,,;- - '
OI ;......:....
'-'- - '--'7 - '" t. ... . 0
.................. ----------------- . .,. o ........ ---.. .. .-- .. S' ............... .
[---- ............ i ..... ... *.o eplS , ..4.............. IlII4UMOQ
- ----------- "a"D iI*
habili*iidilddl* lililBii*ilililllDg tlllBOiH 7------- ----- ----_--,
,"No2D4l14n4i~4~~p44l4l~~~fl4fUf~l Inmmwm AIM mn~ummimownrnIlm n 11 lwlwýwum
--- -.-- z ---------- .................. ---------------
----------------- I I-I
----------------- .................. -----7:77 ý-7. ---------- - -. .-. I.. . -.-----------. . ---. ---------------0".
----------------- ---------- S...... ..................................... a's'
----------------- .-................. I
---------- S......
. 0"9 9'9 S6T
.................. S..................I i-.................
*------------------------------- oloi 0'9
- - 9 '9 S..................
---------- ....... , ................. ................... 0'6
----------------- S..................'
i..................
---------- S....... ................. ...................
. . .. .. . . . . . . . . . .. . .. . .. -6
'61.
---------- I------
------------------ ----------- 4.......................................... O'44 T.k I-.................
...........S.. . . . . . . ........... w -- - --
- ---6~
. .'to*59
............. ........... .. . . . . . ........... w0"0/--- ................ - --- -- ,
- -4~4- .. : .......... ----------
------------ .......... . . . .. ..~~~-i .. . v.. .. . .. ..... ,... . . '/ /
f : -; --it
------------ .......... --- -------------- -- --- 'k
"----------4
- 4. 444
.4'$444 44j 0"444,
!elIUOJd 61: GlZZO'NO
"A..
Ji 4 9* - Nozzle 38 Profile FRAMATOMEANP , 15.0" 1...... .. .. - ..- . .. . : --'. ".*9 / ,99 *"
"14.5- ......-- ----------------- --------- ------ ---------------- .....................
14.0 -- - .....
---- -- ---------- ------ *i.................. -i 13.5 ----------- ---- ; .
....... --------- ------ S.................... _. 1,,
13.0 ----------------------------- L..... ......... ........ *i.................................... 4.................. ---------- S Ide 1 2.5 ------------------------------------- ..-----... -------- .i................. 12.0 11.5 ----------------- ---------------- ---------------- ----------------- - 11.0 ----------------- ----------------- ---------------- ----------------- I ---------------- ----------------- ----------------- 10.5 ----------------- ---------------- ----------------- ----------------- ---------------- ----------------- ------------------ ----------------- 10.0 ----------------- ---------------- ----------------- ------------------ ----------------- 9.5 ----------------- ---------------- A--------------- ----------------- 9.0 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- 8.5 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- ---------------- 8.0 ------------------ ----------------- ----------------- ----------------- ------------------ ------------------ ---------------- :. ----------------- 7.5 ----------- L--------- I -
----- - --------- ----------. j------J-----I -----.- I------------------ I ------------------
7.0 ---------------- -----------1& ---- ---------------- --. p °-- ............... 6.5 ---------------- ---------------- ------------------. 6.0 ---------------- ---------------- .
------------------ ----------------- r------------------.
5.5 ---------------- ---------------- - - - --- - -- - --- -- --.. .---....... .......--- 5.0 ----------------- --------------- -----------------. 4.5 ----------------- ----------------- ------------------ 4.0 .......... ...... 7 3.5 3.0 ----------------- ----------------- -----------------
---------------- ----------------- ------------------ ------------------ Downhill 2.5 ----- I------------- -------. . : .- . . Side-,
2.0 ------------- ----------------- ---------------- ----------------- ----------------- -- 9 1.5 ...............I 7------- ----------------- ------------------ 9- --- --- -- 7 ------- 1.0 - - ----------- ----------------- -----------------
- . . . * .. .- S............ kl=ki*...*..-;.
-------- -d-do-0.0'. "~ .. .. .~ .
0' 50o *1 I1 2007> 250'
*7 4
-6 -8
-10 -*-11 -12 9 9- 15 ---- 16
-13 - *14
"--'-Uphill / Downhill demarcation Noz. End I
Noz 38 Chart 1 Page 2 of 2 8:34 AM9/24/02
CiC FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCF=tURE* I3LA. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-IS11I 00-09 PQ NO.: PQ-100-1, 54-PQ-1 00-2, 3, 4 and 5 A Reactor Head Penetration rFMAT'rOMZ-AMP Ultrasonic Examination Data Sheet Customer: W] MAC- Plant:- 5e-.k,c'/-' Unit: Penetration No.: y9 Procedure: 5'1-i1s- o0-'O Equipment: Description VH# Cal. Due Date SN#
.Tomloscan' "" 1 ,J/.-L 3 2.Ozgq 16 Channel P/R N/A r/. "]1A ACCUSONEX'm Data Acquisitidn Software: Version 6.2.5 ACCUSONEXm Data Analysis Software: Version 3 -7.V a" Cable Length: Got Type: *&.- t4-q-T # Infermediate Connectors: i Calibration Block: 6,,o/q3o0/ Calibration Setup: "Scan File No.:$,R?,,<7- o5 . -.T/7 Initial Calibration File: .22 ,/4,'4511111 Final Calibration File:e,,Aj-T*JUc-b 16-1b4 _
Scan Start: Z = -. - Scan Start: 0= -S Scan Stop: Z = 5, -"Scan Stop: 0 = 6X Index Increment: 30 Channel Angle Serial No. Comments I 5O Results: No Recordable Indications 2 Leak Path Detected /. Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: Date: ,9-, ,7-. Reviewed by: Level: Date: ,- . TYPICAL DATA SHEET FIGURE 5 0ý (i ti Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet ICustomer: Nuclear Management Corporation Plant: Point Beach, Unit: 1 Nozzle: 39 Procedure: 54-1S1-100-09, Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.4 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a Axial Scan t c;MSr.deg- I*'*.Stop:- T..: Idei.' ,,"
-etup:L,.a. Ch2 nli Ch7 n/a es~~~"~ ;', ~* Ch3 n/a Ch8 n/a Circ. Scan Start: L___ -j5deg @L-07 " Stop:1 365 Ideg @1 591' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_03.27.51 Cal Block SIN: 60119300 ChS n/a ChlO n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 12 T NRI 3
4 6 7 8 9 12 113 14 16 17 .... Data Loc. 0 30 60 90 120 150 ... 180 210 240 270 300 330 360 Deg ree.. . 0 30 60 90 120 1150 180 210 1240 270 300 330 360 Degrees WELD Nloz. Loc. POIE Noz. End 0.40 0.40 10.40 0.40 0.40 0.40 0.40 0.40 10.40 0.40 0.40 0.40 0.40 inches POIE MAX. 3.14 3.14 3.29 3.49 32.84 67 3.79 3864 3.76 2.94 32.79 63 32.58 43 3.32 3.18 2.39 "'2.27 3.14 2.24 inches Inches MIN. _ 22_4 2.34 2.51 2 69 3.02 2.99 Comments: Measured Thickness: 0.65 @ theta of 143 dogwith an axial positiono Limited Scan? (YIN): N Analyzed by: Dat:_. A b FJ A- Date: P_- - 7- A b Il W Oc.tY- oZ..-? Page 1 of 2 9/24/028 35 AM Noz 39
r... FRAMATOME-ANP NONDESTRUCTIVE FXAMINATInNI p~nflr*!flhIp Remote Ultrasonic Examination Of Reactor Head Penetrations NONDSTRCTIV EXMINAIONPROCDUR I PROCEDURE NO.: 54-iSI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1kReactor Head Penetration P=A-UAT A, M*,tP Ultrasonic Examination Data Sheet Customer: W MC, Plant: At I3eqc..- Unit: Penetration No.: if 0 Procedure: 5L1- Isi- 1o0 Equipment: Description VH# Cal. Due Date SN# gTomoscan "/ozzq 16 Channel P/R N/A N1 I 1 ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version g 7. I' a7" Cable Length: S CI Type: lZe- t4rq # Intermediate Connectors: Calibration Block: *6,o!/,/3o06/ Calibratiori Setup: Scan File No.:. . .. ;Y/.c'2. Initial Calibration File:jqi 2/ q.:Ug q Final Calibration File: c.,-mivE_ 'p ,". N 11.*. z Scan Start: Z = ,-.? Scan Start: 0 = -" Scan Stop: Z = S..'Scan Stop: 8 =3S' Index Increment: 30 Charmel Angle Serial No. Comments I 5"J. oq-2o Results: o Recordable mndic Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: 4,.,' f-,,, Level: Date: 9- ?_T-e7 Reviewed by: Level: Date: /Z. TYPICAL DATA SHEET ul - 0 r' . Z,1 "0 L." FIGURE 5 Page 31 of 32
A FRAMATOME ANMP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 40 Procedure: 54-ISI-100-09 INozzle Dimensions: (Kt.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.36 Probe Serial No.'s: Ch I S0420CN Ch nl/a Fig,-@ 0p de @It z- '--,',,Setup:I Ch2 n/a Ch7 n/a AxiaScak*nCh4,-St3rt:I , Id3o,-t@ ,, 'Stop.I ,*;. Ideg - ,-h3 n/a Ch8 n/a Circ. Scan Start:[I -_Jdeg@I -0.7 " Stop: 365 Ideg @1 5.98 - Setup: [3 Ch4 n/a Chg n/a Files: - A226704.31.02 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI -, _" 2 ' 3 4 5 6 7 8 9 10 12 13 14 Is 16 17Data Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 160 90 120 1501 180 210 1240 270 300 330 360 iDegrees PROFILE Noz. End 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.363 0.36 0.36 0.36 0.36 0.36 Inches MAX. 2.78 2.78 2.93 3.32 3 26 3 46 3.51 3.4"1 3.36 3 22 2.88 2.88 2.78 Inches MIN. 1.53 1.67 1.86 2.21 2 35 2 40 12.45 2.25 12.06 2.01 1.82 11.77 1.53 Inches Comments: Measured Thickness: 0.64 1@ theta of 357, deg with an axial position of ... 4.47 Limited Scan? (YINI: NI 1Analyzed by: ,",..**' . Date: * ,7- -. Analyzed by: t-.I -/* Date: 4 c4 00Y-2V-u-L 9/24/028:34 AM Noz 40 Page 1 of 2
- - 4 . -444* ,4....
4 4 4 *'4'44 F. .444 Nozzle 40 Profile '4
- . -. - 1/2,
" " FRA'ATO M rMANP 4, 44 44 ,4 4 .4 4 -- 4.
'15.0' 14.5.-------,""' - ------------------- 4.
14.:-------. ---------- -----
---------------- ---------------- --- I -------------
, 30_ . ...': -,........ ----- ----------- ---------------- I ------------------
13.5--------------------- ----I------------ I4 . I 4, 4 13.0----------------..... 12.5 -- --------- --------------- I - -----------------
~12.0:--- --------------- .......... ----------------- -----------------
11.5 - -------- ..... ------------------ ----------------- ----------------- ----------------- 11.0 ------------------ ---------------- 10.5 ....... : .......... ----------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- V.--------------- ----------------- ----------------- 10.0------------------ ---------------- ---------------- ----------------- ----------------- 9.5 ------------------ ----------------- ----------------- ----------------- ------------------ ý\ --------------- ------------------ ------------------ 8.5----------...... 8.0 1 .---------------- 7.5 ------------------- --------------- ---------------- ---------------- -----------------. ----------------- ---- --------------. 7.0 -----------------------------..... ---------------- ---------------- -- -- -- -- --
----------------- -- - - - -- - - I-- ----- .. ... ...
6.5 -----------------.--------------- ---------------- ---------------- ----------------- ------------------. 6.0 -----------------.--------------- ---------------- ----------------- -----------------.. 5.5 ------------------.--------------- ---------------- ----------------- ------------------ ... 5.0 ------------------- --------------- ----------------- ------------------. 4.5 ------------------.--------------- ---------------- -- ------- -- -------. 4.0 -------------------.-.-------------. ---------------- ------------------ 3.53.o ---- ---- ----- -- - ---------------- m hfnf-- --- n4tiuF4 M VM! L 4umIuiIl44muat.uIu.mNg4I4 23 . 444...... .......... 4.. . . -------------- 2.015 ------------------------------------.. Downhill
----------------- ----------------- . ----- Side, 2.0 .. -- ' ------
7 -------------- ------------------ ---------
- ------------- I--- ---------------- -. ---, --- -' .
- ------ S4-------------
- 1 .5 - -- - ---- ---- ---- --- -4 1 -4 .. -4 4 '4 4 1' .
.4' 4
1.0~~~~~~~4 100~ - 150 ~200 , 250 300'U 4,4 4
- ,, 4'
, S Klý ý*
44 4 14' .'-I'4.J." '444 4 -. 4 j.4,4
."'L4 "r*:. ,": '" 4' 4 4 '.4..*4 4.4 A
-2 3 -4
-8 Iz5 -6
-- 10 7
11 -12
-9 -- - - 15 -.---- 16
-113 14
~- =-- 1 "-"m-Uphill/ Downhill demarcation Noz End 1
Noz 40 Chart 1 Page 2 of 2 8:34 AM9/24/02
FRAMATOME.ANP Remote Ultrasonic Examination NONDESTRUCTIVE EXAMINATI1ON PROCEDURE Of Reactor Head Penetrations PROCEDURE NO.: 54.s-1S100 A Reactor Head Penetration PRUA'ar*A1AN- Ultrasonic Examination Data Sheet Customer: M`J rr l Plant: i, Unit: ' Penetration No.: L I Procedure: 59- is,-.,oO-o'i Equipment:
,Description VH# Cal. Due Date N#
gTomoscan n "/' sq 16 Channel P/R NA N/A ACCUSONEX' Data Acquisition Software: Version 6,.2.5 ACCUSONEX Data Analysis Software: Versior5- *."" Cable Length: Soo Tpe: i- -Tpe # Intermediate Connectors: I Calibration Block: *o/,jq3o,'/ I Calibration Setup:
"Scan File No.: f 2.2 _O . ' 7 Initial Calibration File: R*ee,_4. VC.qV Final Calibration File: c,,AnvvUD erA.r " *'.-- .
Scan Start: Index Z =7.7' Increment: 30 Scan Start: e 5 Scan Stop: Z s-~9? "Scan Stop: 0 =.5$D-' rV Channel Angle Serial No. Comments
/ 5O°*- 509 eCAJ Results: uReodble Indications Leak Path Detected Axial Flaws Detece I Circumferential Flaws Detected I5 Comments:
Analyzed 15v: Level: z Date: .. ~-,~ .Reviewed by: Level: "Date: YTTYPICAL DATA SHEET FIGURE 5 PFe 31 of 32
A F R AMATIM E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation . Plant: Point Beach Unit: 1 Nozzle: 41 Procedure: 54-ISI-100-09 Nozzle Dimensions: (ia.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 30 End of Noz. (In.): 0.47 Probe Serial No.s: Ch 1 S0420CN Ch 6 n/a I Axial Scan ,i" - Start:_LL,.L deg, @I 'I Stop ,J,"dei, ,Setup: '. Ch2 n/a Ch7 n/a
- ~
' ~ ' ' ~ . .. Ch3na Chna Circ. Scan Start: -51 deg @1 -0.7 " Stop:I 365 Ideg @1 598' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_05.39.37 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max i NRI 2
-3
-4
-5
-6
-7
-8 9
10 11 12 13 14 16 2~~ ___ C__ 11(_ 1 __. 17Data Loc. 30 so 90 120 150 ISO 210 240 270 300 330 1360 30 Degrees 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz, Loc. 0 30 60 0.47 0.47 0 47 0 47 0.47 n.47 0.47 0.47 0.47 Inches PROFILE Noz. End 0.47 0.47 0.47 0.47 2.99 13.18 13 62 3 66 13.66 13 66 3 61 3 47 3 42 13.38 3 28 2.99 2.99 inches MAX. 1.87 1 187 1 2 41 2.45 1 2 55 1 2.65 2 45 2.36 -2.16 1 2 02 1.98 1.78 1.87 Inches MIN. Comments: ' Measured Thickness:1 0 63 @ theta of 1 3581 degl with 'an axial position of 0 961 Limited Sa?(I)
. Date: 9P-2*.7 - Analyzed by: A/i/t Date:
Analy zed by:. /_=_* Noz 41 Page 1 of 2 9/24/028:34 AM
Z jo Z 96ed abed:eq L HJtl IZON ZO/tZ/6nV VC:8 uo1180jewep IIIIumolUO 1 ildfnnnnwu PU3ZO . 14 ___ 6-9 L 9 17-AC) ge ON OM 09 0.. 09z ooz 0M IA . 00I , C' 0 , A *. "A A
'I 910 0*L.
97
,,epums mI C
* , A l -u-uu~
-C - - - - - -- -- - -- - -I- - - - - - -m
- ur -u - - - - u- i u- -n - i w ~ n-uh~
- -n-um7ai - - - - - - ~
- -- ~
- -- ~~
- -- - -- ~ - -- d1 - ---- - -- - - -- ____ _. .. . .. . .. . .. . .
I-Al- ---- 0.5P 9*5
....I... ---
.... -------I---- ----------------- --------- --- ------------- I--- ----------I- ------------- I ----------- --- O' 9.9'
................. ----------------- ----------------- ---------------- ---------------- 0,9
-------------- :--. ---------------- ----------------- .................. ---------------- ---------------- 9.9
.................. ----------------- ----------------- ------------------ ------------------ ------------------ .... 1------------- ----------------- 0'L G9L 9's 0'6 9*6
----------------- ........ I-------- ----------------- -----------------
O*Zk GZt
---------------- 0 . ct
-- --- r - -- - -- -- - -
-- -- -- I-- -- -- - -- -- - -- -- - -- -- -I- -- -- - -- -- --- -- -- - -- -- -
OIS
............ ---------------- .c 9-f C;
I_________ - I_________ I _________. _________ I_________ I - J n-fl A VZI' A ,c -' EINV OV0.LVVC1VU: A' GIlUld. LP GIZZON
I R.,> -ýAA
/V?
FRAMATOME-ANP --8* NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 Reactor Head Penetration
*AMA'*tOE AtOP Ultrasonic Examination Rata Sheet Customer: hN1'c Plant: Po,,',,' Bt,,A Unit:
Penetration No.: Procedure: 6-q-Is/1 1,04--Of Equipment: Description VH# Cal. Due Date SN# gTomoscan 17 16 Channel P/R A- t4J/A 1A/ ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version *33
*3.*
Cable Length: 61o Type: 1Z(.-V-.z # Intermediate Connectors: I Calibration Block: 6o//I 3vE/ Calibration Setup:
'Scan File'No.: , -- . 3-I Initial Calibration File:
Final Calibration File: 1;z2-2 6-or. 11 .. 2 Scan Start: Z = 0. 141L Scan Start: 6 = .5 Scan Stop: Z = 1?. %Scan Stop: 8 = Index Increment: 31 Channel Angle Serial No. Comments I 6 . 35oqq Z 3o'- 35.zoz -oF D 3 &o"'s 35o00
&Cr5e- 3 60$7Z Results: < [--J cordable Indicati-ns Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed 6~y: -Z" Level: Date: / 2 Reviewed by: .--- .Level: z-i7 Date: /-27, L-01,'
ý-k &ný TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
7A
-10 At Customer:
,, -Nuclear
..... Management Corporation .. . Plant:
*. ,, v ~Point Beacho U1.tIIum I,..^nllllllLtlUII UdLdlnit:{)[~Le 1
Procedure: 54-ISI-100-09 Nozzle Dimensions: (ih.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 136 End of Noz. (in.): 3.74 Probe Serial Nos, Ch i 35044 Chi6 35052 Axial S " " Sh7 @ d " ettp: Eh 2 35202 nda Fillp:* ---- Ch3 35070 Ch8 n/a Circ. Scan Start: -5 deg @ 0.47 Stop: 365-deg @I 17.6
' Setup: I Ch 4 35044 Ch9 n/a "Files: A2265_13.02.53 _____________ Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Ad ted Circ. Extent Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Mm Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-21314 16 11 "17 -8 Data Loc.! 136 166 196 226 256 286 316 346 16 46 76 106 136 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Ders PROFILE Noz. End 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 Inches MAX. 6.79 7.00 7.31 7.74 8.19 8 48 8.51 852 8 24 7.67 7.19 6.92 6.79 Inches MIN. 5.28 5 48 5 81 6 25 6.90 7.29 7.36 7.35 6.73 6.16 5 82 5.48 5 28 ;Inches omet:Measured Thickness: 0 64 @theta of 0deg with* an axial position of 5 93 Limited Scan? (YIN):I n ________ Analyzed by: .,.-".,* *,.*.Date: */_*]0. Analyzed by: v*/A" Date: 6'/ 4 0'3-IDI£ 9/221022 51 PM Nozzle 42 Page 1 of 2
-- I 4.
* - C -. .4 45 Nozzle 42 Profile FRAMATOME ANP 7.
15.0 14.5 --- - --*-- --- - ----- "- 'IF r r 14.05......-........ 2t...... ..... --------- ------------------ 14.0 ---- - - -- -- -------- ------------------ .. - ------ 13.5.................... -------- ------------------- ------------------- ------------------- ------------------- 13.0 ............................... -------- ------------------ ------------------- ------------------- ------------------- 12.5---- -------- 7----------------- 1 11 ----------------- ------------------- 12.0 ----.... .......... ------- ------------------ ------------------ ------------------- ------------ ----- --- -- . .. .',,.. . . 11.5 ..........- .......... 11.0 ....................- ......... -------- ------------------ ------------------- ------------------- ------------------- ------ ,--- ------------- ----. 10.5 - ............. -.......... -------- ------------------ ------------------- ------------------- ------------------- - - - - -- - - -- - - - - - - - - - -. 10.0 ------------------ -------- ------------------- ------------------- ----------- ------- ------------------- 9.5 ------------------------- -------- ------------------ ------------------- ---------- 9.0 ..................... -......... -------- ------------------ -------------------- ----------- -------- -------------------- -------------------- 8.5 .............................. -------- ---------------- ..........................
, 8.0.................... -------- ---------------- ----------
" 7.50.............. ------ f 4 1U4M4
............... I nuuuuuauus alIUnflhIflmE 7.0.............. -------- ------ ---------
5.5 -------- ------------------- ------------------- ------------------- ------------------- 5.0 ......................-......... -------- ------------------ ------------------- ------------------- ------------------- 4.5 ..................... r.......... --------- ------------------- ------------------- ------------------- ------------------- 4.0 ......................-......... I I 1 ------------------- -------- q 3.5 ....................-- -------- I
-S
- 1 I-
.i 3.0 ............................... -------- - -- - - - -- - -- - - - - - - --.
25....................
- ........ -------- --------------- ---- I ----- ---- ---- ----- ---- ..........
---- . . . .. * . Downhill 2.0 ....----........-------- --......... t-------------------. ------------------
------------------- - ------- ----- Side :
1.5 ---------------------------------.. -------- ------------------- --------------- .--- ..--- ........---- . . -*-- -- -- -- 1.0 .... .... -.... - ... 20 ------------------ --------------- ---------- . .. .. ...--.. .. .. .. . ..--- '** 0 .5 . . . . .'--....... - --.... ...... --------- ------------------- ---------- --- ------------- - .....--- ..... ... ,, .. _ , . .. , 0.010 I I I O0 50 250 - " * .300',-:., 350;, '
- 100 150 D 200 05
- , ,,.'D egrees -- 12.
-2 -4
-6 7
-9 -10 - -- 11
-13 -- 14 15 ------- 16
-Noz. End --INP"Uphill / Downh ill demarcation 2:51 PM9/22/02 Nozzle 42 Chart 1 Page 2 of 2
I V FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 4A Reactor Head Penetration t=*J* :*TM.I .AN Ultrasonic Examination Data Sheet Customer: /4rlC Plant: P/,Ai', 8-,,2cA Unit: I Penetration No.: Procedure: q-j-,-/O- ' Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " z-t1u* z7 o .3 A0317 16 Channel P/R 1 1A* ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEXM Data Analysis Software: Version23-.- ?.y " Cable Length: 50o Type: Rc. -U-+41 # Intermediate Connectors: I Calibration Block: e0o// 3DO/ Scan File No.: ,z.' / Calibration Setup: Initial Calibration File:/,?;:z4.. Final Calibration File: ,*-=ctz 2r. 31.
-or, I?, '"7 r
Scan Start: Z- 7q Scan Start: 0= -. ¢ Scan Stop: Z= l'i.o" Scan Stop: 0 ;$ Index Increment: 30 Channel Angle Serial No. Comments Z ~-*°. 5 zo z- -roF D
.3 . 1,"0 35070 q qv.S'zý5 S so Vy To Results: iF-ecordable Indications Leak Path Detected /
Axial Flaws Detected Circumferential Flaws Detected Comments: ', , ,r. %a ox C-r-k VkP 1 -0' Analyzed bv: Level: Date: -- . Reviewed b : Level: 'Date: TYPICAL DATA SHEET A') FIGURE 5
ý511 Page 31 of 32
AN *. CRDM Nozzle Ullirasenir 9Fvrnimn2*re-n ri Qk f Customer: Nuclear Management Corporation Plant: Point Beach jUnit: 1 Nozzle: 43 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i.) ID: 2.750 OD: 4.000 Thickness'. 0.625 Downhill Side of Nozzle (deg:): 48 End of Noz. (in.): 3.6 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scant*¢ .. Start: j deg @ j "< Stop:. Ideg Ca Setlip;: . Ch2 35202 Ch7 n/a Filies:, , ,. c S " ; ' , " " deg S 12 ;.Ch3 35070 Ch8 n/a Cir. Scan Start:22.66deg@L*5j" Stop:0 19 ideg @I 365j' Setup:[1 Ch4 35044 Ch9 n/a Files: A2266_04..1.55 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI _ _ _ 2 A
-3 4
5
-6 7
8 9 10 12 13 14 15 16 Data Loc. 48 78 108 138 168 198 228 258 288 318 348 18 48 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 Inches MAX. 6.86 690 7 04 7.41 8.02 8.39 8 58 8 39 8.16 7.69 7.33 7.08 6 86 Inches _MIN. 4.76 499 537 569 6.25 6 81 6.95 681 6.39 5.88 5.39 5.12 4.76 Inches Comments: Measured Thickness: 0 63 @ theta of 6943 deg with an axial position of 944 Limited Scan? (YIN): N Analyzed by: Date: - Analyzed by: Aj Date: 9/23/029 34 AM Nozzle 43 c ?/'4a... Page 1 of 2 I
,-Nozzle 43 Profile ., . :, .. '*;- .
FRAMATOME ANP 15.0- ,
- 14.5,------- --- ------------ ---------- I ----------------- -----------------
14.0 ---- --- - -- - -- -- - - -- - -- ---------- ----------------- ----------------- ------------------ ---------- 13.5 ---------- ----------------- ----------------- ----------------- --------------- 13.0 ........................................... ---------- ----------------- 12.5 -- 12.0 -..----- ....--------- 11.5 ------------------- 11.0 -- 10.5 ......................................... ---------- ----------------- I---................ 10.0 ---------- k"-------------- ----------------- -::::::::::::::::: 9.5 ---------- ---------------- ----------------- ----------------- L................. 9.0 ---------- ----------------- ----------------- -- ----.....---.. . ----------------- S-.---------------- 8.5 ----------- ------------------ ------------------ arm
'1 4
J 1 mai*imammmm*tl*ll*
---------- ----------------- ----------------- S....... . ........ ..
8 .0 ---------------------.. . .. .. . . .. . . . . .-
---------------- ----------------- ----------------- ::::::::::::::::::1 7.5 - .---- ----.-..;-.-:- ------------. . .. .. -----------------
6 .5 --- ------ ------------- ------ --- -----. -... .. 6.0 ------------ - -- ----- 5.5 ---- --------. ---
----------------- ------------------ ------------------ S.....
5 .0 ....... .....
.0 ---- ---- --- --...---
----r-... . ..-- --
................ -------------- ------------------------.-------------.... I
......-------------- Downhill 7..'.
Side
---------.... ---................---............. 4 --.....
- , --. ,- . -,- -- S........ .,.. ...... .. .. . , , ,,. :- *
- - - - - - - - - k" , ,
150 200 , . 250
,_________..:*,,**. .5 .4:' ,10 300, , :
-2 -.---==.3 -4
-6 -7 -8
--- 9 -10 -11 - - -12
-- 13 - 14 -15 16 Noz. .End b4f'~~41 "='""~"~Uphill / Downhill demarcation 9:34 AM9123/02 Nozzle 43 Chart I Pa1ge 22of_
Page of 2
P ýAIV FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-1S1-100-09 I o PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1.
*Reactor Head Penetration FMAM*TOME AMoP Ultrasonic Examination Data Sheet Customer: M _. Plant: Fv/ B&--,,tA Unit:
Penetration No.: 9Z. Procedure: ,00-/"-
/O- -of Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan I l *-z7o 3 A0o3i7 16 Channel P/R II1 ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX"" Data Analysis Software: Version a-.5- ,.g Cable Length: 5 01 Type: 12.(-,-U'A # Intermediate Connectors: Calibration Block: d//,I3rE/ Calibration Setup: Scan File No.: 2,* .g 2 7.$ Initial Calibration File:1Z2-.62 1.. 29.3o Final Calibration File: I"z-zt4 s".i.r, 37 Scan Start: Z .L47" Scan Start:0= -<- Scan Stop: Z= ji.c ' Scan Stop:0=y74r. Index Increment: 3° Chanrnel Angle Serial No. Comments 6 35oqq Z 3o*I* 3,fZoZ o* 3 (.,,os 350*0o 5" f 005 3S052.z Results: o"ecordable Indicationss Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzedb :Leve 1: -27: Date: 49- :2 2-0 Reviewed by: -Level: Date: ' ~~
-/ TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
d A. FR A".A-ntATO AV*JP
- --.---...- '*****n**-*s.*s.I5 I..'L4Ll JIIL C..... ... .A ti.tr~c~n i"*r.; F--*
Customer: Nuclear Management Corporation . . Plant: Point Beach I l Unit: 1 Qk,,l W%;f¢ Nozzle: -44 Procedure: 54-ISI-100-09 INozzle Dimensions: (ia.) ID: 2.750 CD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 263 End of Noz. (in.): 3.58 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scar'v t, Start: deg:@I., . . . Stop:, ideg @ j. Setup:i"
- . Ch2 35202 Ch7 nla iFiles" "'-. . -' Ch3 35070 Ch8 n/a Circ. Scan Start: 0.47 deg @1[-5-" Stop: 19 Ideg @1 3651' Setup:[ 1 Ch4 35044 Ch9 n/a Files: A2265_21.37.31 Cal Block SIN: 60119300 - Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-1 NRI -3 -4 -6
-7 8 9 10 11 12 13 14 15 17 Data Loc. 263 293 323 353 23 53 83 113 143 173 203 233 263 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 Inches MAX. 6 56 6.74 7.14 7.59 8.30 8 30 8.30 8 17 7.90 7.55 MIN. 7.14 6.78 6 56 . Inches 4.78 500 531 5.72 696 6.92 687 6.95 6.14 560 5.18 Comments: Measured Thickness: 500 4.78 Inches 063 1@ theta of 93 deg with an axial position of 9.15 Limited Scan? (YIN): N Analyzed by:-K, Date: 2-2'Z- 0-2 Analyzed by: Date: 9123/029:32 AM Nozzle 44 Pag 1 of 2 Pagel1 of 2
- t,'.
,a-,.
.4,...
Nozzle 44 Profile - FIRAMATOME ANP a a -.
"'-a 15.0 0 I I I - I 14.5
_: -------------- 1................. 14.0 .................. ----------------- ----------------- . i i 13.5
----------------- ----------------- ----------------- S........ - ----- ;. ..
13.0
------------- i .. .---............
----------------- ----------------- ----------------- --............ ---.... upSl:[do 12.5 12.0 11.5 11.0 ---------------- ---------------- ----------------- ----------------- I........ .........
10.5 ----------------- ---------------- .................
-i ----------------- ----------------- -----------------
10.0 ----------------- 9.5 ----------------- I -------------- 9.0 ----------------- ---------------- ----------------- ----------------- ----------------- 8.5 ----------------- ---------------- ----------------- ------------------ ----------------- 8.0 ------------------ ----------------
ý;
----------------- ----------------- I 7.5 7.0 6.5
~
.t~hithIhfliiWf lMISIU~IfVIMAA WIt~h kf~lzMuhkwk Sh7 khý hfIýtar h~t~h4*i~7I1I~t1~iuu
- - - - -bh-
- -n--n-h- -
6.0 ----------------- 5.5 ----------------- - --...-----------. 1................ 5.0 4.5 ----------------- 4.0 ------------------ L:Z: ------------- 3.5 i ]* ' .............. ... a............ 3.0
. ...... ---- .......--- ------..............--- ...............--- ...........---.---.....--.---...----. Downhill 2.5 -----------------------------------------------------------------------------
2.0 ------------------------------------------------------------------------ Side
. -. .-. -. 7t
. ----- . . . .. . . . . ..- . . . . . . ..-. . . . . . . ..- . . . . . ..-- --. . . . . . . ..- L . . . .L. . -: " ,*.
1.5 ~~~~~~~~-------------------- -------------------------------------------------------- 1.0 0.5
- t -
- .. .. ,-., L..:
.. . .. .. . t.................
.. . I- ........- -- -....
* -a -
.a? 'tt
"'1 4%tat.,
7 ; rŽ( 0.0
- 0. '. - 100., 150 200 250 300, 350 , " , , .
-2 a.a-a..3 -4
"-5 -6 7 8
- 9 -10 ----- 11 --- 12
- 13 -- 14 - 15 --..- 16 I
- Noz. End .......... 1 -="-au Uphill / Downhill demarcation 9:32 AM9/23/02 Nozzle 44 Chart 1 @9k09-/. - Page 2 of 2 1%
P 014ThAýV 7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration FRANIAr=_E AMP Ultrasonic Examination Data Sheet Customer: M/c. Plant: Pzl. ',e., Unit: Penetration No.: $"- Procedure: " Equipment: Description VH# Cal. Due Date SN# gTomoscan , f-7 o 33I7.
/Z 16 Channel P/R I/A ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version-3.. ..*.0 MY Cable Length: 5O1 Type: IZG.,- t # Intermediate Connectors: I Calibration Block: 1,0/113DO/ Calibration Setup:
ccan File No.: v.'~.. 6 f-
/47. Initial Calibration File: v , - /.O. 2.36 Final Calibration File: A.z.L;-ox'.i . .77 Scan Start: Z '/q7 Scan Start:' = -.X Scan Stop: Z = 17.o Scan Stop: e= 7-c.s-'
Index Increment: 30 Channel Ang1e Serial No. Comments
/ 60 .35Fo/
.30
(,,"fs -"5*zoz OD 3 4 's -35*0 O Results: ti Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: ,Analyzed y: .'-.-- . .--- Level: Date:.9" Reviewed by: Level: Date: /o--O/ TYPICAL DATA'SHEET FIGURE 5 (ý914L+' Fage 31 of 32
A A C-ustomer: Nuclear Management Corporation
,- .=.*. *uoumt
!Plant: Point Beach
~AI,-^llll1tUII UI[dII TU-nit:
oi*i~ee Nozzle: 45 Procedure: 54-ISI-100-09 JNozzle Dimensions: (Rh.) ID: 2.750 OD: 4,000 'Thickness: 0.625 Downhill Side of Nozzle (deg.): 285 'End of Noz. (in.): 3.6 Ch 1 35044 ' Ch 6 -35052
*;xa Scan', Start"-+*:" deg';,.-:" ýtop'o' =".-;.' setupI "-i'* Ch2 35202 Ch7 n/a
. * .. .. .. ,,*- Ch3 35070 Ch8 n/a Circ. Scan Start: -5deg 1 0Stop:.
73 I dog @9 S 1 Ch4 35044 Ch9 n/a Files: A2265_20.16.54 Cal Block SIN: Depth EdPitI 60119300 Ch 5 35052 Ch 10n/a EdPoint 2 Axa dutdCr. Extent Flaw Flaw Flaw Fla Weld Location Flaw Surface to Mi Mi Max Max Total Mi Max Total Length Angle TWO Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Mn Max 7--'5 9 T 13 1 T 16_ _ _ __ _ _ _ _ _ _ - _ __ _ _ _ _ _ 12 - - - - _ _-. 13
`14 15 16 17 Data Loc. 285 315 345 15 45 75 105 135 165 195 225 255 285 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 PROFILE 300 330 360 Noz. End 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 360 3.60 3.60 3.60 MAX. 647 665 688 8.09 8.06 821 3.60 Inches 8.15 809 7.83 7.44 7.00 662 6.47 Inches
.MIN. 4 87 T4.87 5.14 665 6.71 6.79 6.91 6.76 6.29 5.73 5.26 4.99 4.87 Inches Comments: Measured Thickness 063 thetaof 135 deg with anaxial position of 11.21 LImited Scan? (Y/N): N Analyzed by: Date: ---vo9 . 0 IL. Analyzed by: Date:
9/23/029'32 AM 9I2IO2~32AMNozzle 45 914iAV- Page 1 of 2
.... J Ji
-- .. -'-A NaP Nozzle 45 Profile
, " FRAMATOMR ANP 4 ,- .
a . - A 15.0' 14.5 -- ------------ -------- ----------------- ----------------- ----------------- ------------------ ------------------- 14.0 -- ------- --- ------ - -- ----------------- ----------------- ----------------- ----------------- --------------- i--- 13.5 ------------------- ..------------- ... ----------------- ----------------- ----------------- ----------------- 13 .0 ...... - --I - ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- 12 .5 . .. . . . . . . . . .. . .. . ... . . . .. . . . .. . . .. .. ----------------- ----------------- ----------------- ----------------- ----------------- 12.0 ------------------.. 11.5 .. . . . . . . . .. . . . . . . . ----------------- 1 1.0 - ..---------------- ..------------- ..------------------ ------------------ ------------------ ------------------ ----------------- ...... 10 .5 ---------- -- ------ . .. . . . . .. . . ...- I -- .5-
~~~~~
-- 1--- -- 1--
.U --...............-................... ---------------- ----------------- -----------------
8.5 ----------------- ---------------- ------------------ ------------------ 8.0 ---- 7.5 t---------- t...-*-----'--------, *----------*--------....... ------------ ...... 7.0 ---------------- ---------------- ---------------- ------- ----- ---------------- ----------------- 6.5 1-"' ----------- "777 ------------ ------------------- ---------------- 6.0 ----------------- -------- ------ ---------------- ---------------- ---------------- ------------ ----------------- 5.5 ----------------- ------ --------- ---------------- ---------------- ---------------- ----------------- 5.0 --------------- ----------- ---------------- ---------------- ---------------- ----------------------- ----------------- ----------------- 4.5 ----------------- ---------------- ---------------- ----------------- ---------------- ------------------ ----------------- 4.0 ------------------ ----------------- ----------------- ----------------- 3.5 .......... + .........-......----... ----------------- 3.0 ---------------- ---------------- ----------------- ----------------- ------- - 2.5 ---------------- 7- Downhill
---------------- ----------------- ----------------- ----------------- ----------------- II ý 1ý Side 2.0 -.--. --- ----- ... ...
1.5 ------------------------- ---------- ---------------- 1.0 - --------- . . . . .[----- --- -- -------------- ------------- 0 .5 - .......---I .......-- ------ ----------- ------------------ --- - - -- - - - 0.0 ---------- ------------------ ------ 100 150 , 200 , 250 ',; 00", , ,: . 350"* '"';J " ;*
--- 10 - - 11 ---. 12
. .. 14 -15 ..... 16
- ! -'"I-
--- -N z. End ='===Uphill /Downhill demarcation 1
9:32 AM9/23/02 Page 2 of 2 Nozzle 45 Chart I1 ) ],.,l.
FRAMATOM-.ANp NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations SPRCEDRE O.:54-S- 00 PROCEDURE NO.: 54-0-100-0I Reactor Head Penetration F*Al=-M.E AM*.P Ultrasonic Examination Data Sheet Customer: Nnrc Plant: ,CPo/,. BeqA Unit: I Penetration No.: Procedure: 6"q-27-A/00- Of Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -i I-f 2 /z-7o - Ao3i 7 16 Channel P/R N-1i .WIA N/1 ACCUSONEX` Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3-" -1.S Cable Length: 5o0 Type: Rc.,- 1-,4 # Intermediate Connectors: I Calibration Block:.&o//,.3vEI. Calibration Setup: S'can File No.: Initial Calibration File: ,2.2"2.,,._/o.28.3 A.1'&Z.,£".... iO..o5",9. *Final Calibration File: , I*.3, Scan Start: Z = o.v-1 Scan Start: 0 = -5 Scan Stop: Z = /MO Scan Stop: 0 = 3,, t .Index Increment: 30 S Channeil Angle Serial No. Comments 3 &.O"s -35ojO 6,~ os ~ 36
*o2 5 Results: irbje Idicatýions Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed b: Level: / Date: Reviewed by: - Level: "7 Date: /O/,/0 -L_ 1 TYPICAL DATA SHEET A4-3 O-04 1 FIGURE 5 Page 31 of 32
A( FRAMATOY'E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 46 Procedure: 54-ISI-100-09 Nozzle Dimensions: (Inb) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg-): 308 End of Noz. (in.): 3.67 Probe Serial No.'s: Ch i 35044 Ch 6 35052 -xlal Scan',-Ji :Q- 5tart:ld- - : .'1 StoP'l, __d_,;.etup;0 -.,' $.-, Ch2 35202 Ch7 n/a Filesi: ~~~~~~~~~~~~~~........
....*................. ,......................- dg:~
-, :-,-*..... =.....** h3500 h nl S.......
Circ. Scan Start:[ -5deg @ 0.47 o Stop:I 365 Ideg @I" Setup:1 1 h335070 Ch3 Ch4 35044 ChB Ch9 n/a n/a Files: A226517.05.27 Cal Block SIN: 60119300 - Ch 5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adiusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 2
-3 4
5 6
-7 8 __
9 10 12 13 14 15 16 17 Data Loc. 308 338 8 38 68 98 128 158 188 218 248 278 308 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 Inches MAX. 653 661 800 7.87 8.00 8.10 8.00 7 94 7 66 7.25 7.00 6.77 6 53 Inches MIN. 5.12 520 677 669 692 7.00 6.95 669 639 5.87 5.47 5.22 5.12 Inches Comments: Measured Thickness: 062 @ theta of 1 deg with an axial position of 549 Limited Scan? (Y/N): n Analyzed by: Date: /7 /7-- Analyzed by: ri 7A Date: 9/22/026-59 PM Nozzle 46 Page 1 of 2
Zo 10Z I PNOL19V91"IZZON ZOIZZI6V'd 69:9 U0ileolewep ijjqumocjI / 11qdnmmnn~umos PU370ZON. 9 6-ir- 9
.4 44- .
.4 4. 4' 4- -.4 44.4 2.
seaoe 4,
*>. .4 4 4 4Q9 OOL 44/444.4
+ + .1.
4'--------
------------------- ------------------ ------------------ .............. - - 90 4 ---.44
- 4. 4 4 -- -- --
" O .4 .4 4~4 11444
--- ------ -------- -------------------I ------------------- -----------------
---------- *------- ------------ -------------------- -------------- ----- --------w---------- -----------------
nin ---------------
-,=, -----ý - ;;;;;:------ w----- --------
- ------------- =r (D
.a.ý- - -
a
--------- ----- -l
------------------- -------V--
4 -- ' - --- 44 - -- 44 4 4 4 444444.44, 4 . 4-- 444444------------
- 44. 4. *.4 -- ----
7 7 ----------
-- -- - , 4. --' 44-
----------- I.......
I ------------------- ........: ---------- ----------------
-------------- ------------------- I------------------- -------------------- -----------------
444 .44;444 4.4, . 4... 4*4 4-44
.4" .4-4 44.444,44 4
- 4 I
-4 I ________ j ________ I ________
-4 'U (44 44444 ' >',, .44 44-. *4-1.
*4,4.441;4.-4 4
4 (,* 4 4 4 4 ~ '.'4 NV
'89IO~d 9V OIZZON 4 . 4 ("'4' 444 4/ 4 -- 4 0
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-4Si.100-09 f PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
.A Reactor Head Penetration PJP.AMMMC AMP Ultrasonic Examination Data Sheet Customer: "Mnc Plant: h,,,# e,,. ,tA Unit:
Penetration No.: 7 Procedure: 6"q-o$/-1-/ Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -/z.7o o3i " 16 Channel P/R / 1A/ ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3-" 3.. Cable Length: 50'1 Type: R.-I"-* # Intermedibte Connectors: I Calibration Block: e o/I 3zvE/ Calibration Setup:
"Scan File No.: A le'-.o7.
0 Initial Calibration File: AssLt,2-jo.Z S.3o Final Calibration File: ,7vzc-..r.19. Scan Start: Z = 0, q:7" Scan Start: e = -5 Scan Stop: Z = "2.4 Scan Stop: 0 =4r Index Increment: 30
-Channel Angle Serial No. Comments 1 6' 35'oWq 3 /- 3-51D "S5zo *s
. 0'CI -35o0?
q~ ~ s~.Z* o q,ý "ro b Os 36oq2.. Results: o Recordable Indications> Leak Path Detected / Axial Flaws Detected Circumferential Flaws Dftected Comments: Analyzed I*y: - Level: Date: '/ Reviewed by: , ,. Level: Date: 16121 TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
Ac CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 47 Procedure: 54-ISI-100-09 INozzle Dimensions: (Ia.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 315 End of NozL (in.): 3.68 Probe Serial No.'s: Ch 1 35044 Ch' 35052 AxIal Scan* Sta!t:I d "- "',0,stor:.l--. Ide l -4"Sl'_;_ Ch2 35202 Ch7 n/a ________________________i.._____________________ Ch3 35070 Ch8 n/a Circ. Scan Start:1 -51deg @1 047_" Stop:I 365 Ideg @1 18861' Setup: I Ch4 35044 Ch9 n/a Files: 5-~kMTM______ A2265_16.07.34 _______ Nozzle_ Cal Ultrasoni Block_ SIN: Examiatio 60119300Data___ Sheet_ Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 2 3 4 6 7
-8 9
10 11 12 13 14 15 16 17 Data Loc. 315 _____ 6~~~~~~~~~~~~0 345 15 2______ 45 1____ 75 _____ 105 ___ 135 165 195 225 255 285 315 Degrees WELD Noz. Loc. 0 30 60 90 120 150S 180 210 240 270 300 330 360 Deglrees PROFILE Noz, End 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 Inches MAX. 6.77 6.90 8.17 8,10 8 24 8.33 18 33 8 17 7.83 7.45 7.11 16.88 6.77 jInches MIN. 532 541 688 695 7.11 7.31 17.31 7.04 665 608 561 15.39 5 32= inches Comments: Measured Thlckness:l 0 63 @ theta of 1deglwith an axal position of 9 84 Limited Scan? (YIN): n I Analyzed by: / . Date: q'/717O. Analyzed by: vi/1A Date: 9/22/026 20 PM Nozzle 47 page 1 of 2
1 t t *:-"4' ' 4 Nozzle 47 Profile ' ' * . 5'$
, ,FRAMATOME AN1P ' +C"+ ' 4 *,,. *+f
'41 14.5 " '- ---'7 ------------- --................ ..
i 14.0 - I-
---- ------------------ I-----............... ------... . .......-
13.5 ....-- . .
--.................... +-.....---------------
13.0 - ..-------------------------------------- -... -------------- S................. -------- -----.. --- ---.
- o. ------------------
S.... . ......... -77". 1 2.5 - ..--------------- ..- ------------------- ----------------- ------------------ 12.0 11.5 ............-
------- 7
------------- 2---- ------------------
11.0 -------------------- ------------------- --- -------------- - 10.5 - ............ ------------------- -... -------------- S................... ------------------ 10.0---------------------------------- -------------- --------- ------------------ ------------------- 9.5 ----------------- ------------------ -------------- ------------ A ----- ------------------ ------------------- 9.0 ----------------------------------------- 8 .5 ....................----..................- -...
,, 8.0 ---------
8.5 --------------------- --------------------
-I t"S 7.0 7 ------ ...
........... .. I 4 UiuiflflIbbhamImhn 4! nrnu n1,hnnunummu I
------- 77:7:777-7 6.5 --------------------- -- .. --. ..- .-- .. ---
6.0 5.5
------------- I------
5.0 --- -- - -- - - - ------------------- . . .. . . t.----.. . --------------- 4.5 ---------------------. -.----------------- .-.---------------
------------------- ----------....----.- I------- ---------- -------------------
4.0 --------------------- -------------------- --... --------------- -------------------- ----------..-.-.---- ---------. --------- 3 .5 ------ ------------- 3 .0 --------------------- -------------------. -... - -............... --.-.-.-.-.-..-.-.-.-.- 2.5 .... 7. --
-- - - ------------------- ----. . .... - - - - ------- --- Downhill 2.0 . -----
. ------------------ :--. .---.. .- .- .---- . -------- -------------------- ----------- ------------- Side-1.5 j ...................------- ................
1.0 .. ..-------.. .
-- -- -- r"-- ----------------..----
0.5 .. .. ----.-. .- L ---------..- ..-- -_ . 0.0 ' .. . . .. ... . . ... . .. - *.- 4 150 . 200. 250 ". " '.300 , 3 50 r , 01 ',0' 50. ,+, . . + +, -. +,, , ' ,,-, F "+. A+ Degrees , , ,+ ,,* ' , .- . - .., .* ; " '.+
-- 5 -2 - 3 -- 4
-6 7 -- 8
-9 -- 10 -- 11 ---- 12
-- 13 14 ,15 16
--- Noz. End --.,--1 "On "Uphill I Downhill demarcation 6:20 PM9/22/02 Nozzle 47 Chart 1 Page 2 of 2
P o1/AAIV7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I. PROCEDURE NO.: 54-1SI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
*A* Reactor Head Penetration FM* OE AtNp Ultrasonic Examination Data Sheet Customer: AjM Plant: Bo,,,, 1' Unit: I Penetration No.: Procedure: 5q",'-/-2--/D '-Of 0 Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan 7iL17- 7 o ;Z0o3i7 16 Channel PIR 1U/A ACCUSONEX*M Data Acquisition Software: Version e.2.5 ACCUSONEX' Data Analysis Software: Version 3.8 0) Cable Length: 501 Type: R6,- 1-.+ # Intermediate Connectors: Calibration Block: &-o//,93DE/ Calibration Setup:
'Scan File No.: , -/. *3-'Z.- Initial Calibration File: _
Final Calibration File: A.2 - S'.
' /03 Scan Start: Z q7"' Scan Start: 0=. V Scan Stop: Z= 12. 7 Scan Stop: e= Ys-Index Increment: 30 Channeg Angle Serial No. Comments S 6° -55o~qq 60 -350-f 3 - &0"s "55*Zo
,.i q4S-z6" -S o -r*o F=Jb 5" &_e56 3 6OFz Resultsid ýNoRecordable Indications* -LeakPath Detected t7oa_ Flaws Detected! Circumferential Flaws Detected Comments: tjgr%
A nalyzedl~:./.,.*/IL; Level: -2r_ Date: 9--21-o'-z-LReviewed by: /"Level: Date: /-* z TYPICAL DATA'SHEET FIGURE 5 Page 31 of 32
A FPA.-ATOM*" ANt=r CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Cor oration Plant: Point Beach Unit: 1 ' Nozzle: 48 Procedure: 54-ISI-100-09 INozzle Dimensions: (il) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg): 47 End of Noz. (In.): 1.29 Probe Serial No.'s: Ch i 35044 Ch 6 35052
,XIdl Schn'04,1,
,~~ l,ýJ1.P.@ stop: T,-,-, .";" e g @1 S t o p:,,I *&,.I Ch2 3,52'2 35202 Ch7 n/a
~Ies~ ~ ,~.~ . ~t~Ch3 35070 Ch8 n/a Circ. Scan Start:I 0.47jdeg @[_-5 " Stop:I 12.71 Ideg @1 3651" Stop: Ch4 35044 Ch9 n/a Files: A2265_01.31.25 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI ,
-3 4 5 6 8
-9 10 11 12 13 14 15 16 17 Data Loc. 47 77 107 137 167 197 227 257 287 317 347 17 47 Degrees 60 90 120 150 180 210 20 270 300 330 360 Degrees WELD Noz. Loc. 0 30 1.29 1.29 1.29 1.2 1.29 1.29 1.2 1.29 1.29 1.29 1.29 Inches PROFILE Noz. End 1.29 1.29 MAX. 4 09 14.41 14.70 1 5.19 5 5B8 - 5 82 5 95 5 93 5.58 5 21 4.72 4.54 4 09 Inches MIN. 3.19 1 3.31 13 60 4 03 4 46 14.76 4 97d 4 82 4.46 4.09 3.64 13.27 3.19 Inches Comments: Mleasured Thickness: 0.64- 75 -thetaof 2541 de6l with an axial position of 9.56, Limited Scan? (YINF: N 1Analyzed by: , ... *: , _DateF73 -I *a " Analyzed by: 37//A Date:
9/22/028:59 AM Nozzle 48 Page I of 2 ag 1 of 2
AMT". Nozzle 48 Profile ""1 FRAMATOME ANP 15.0-. r a r T a -- - - . ,
--- .--- , ,I-14.5 14.0 S.. . _- ... . . 2 '., 2 .. a"
. *-. ":*2..
. 2.It ' ""** '""
13.5 -------------------- 13.0 St... 4 ------------------- 4 7 ---- i--- - ---------------.. ----- ----- --- -Uphilll--; S...._.._............... Up il,., 12.5 12.0 4.................... 11.5 11.0 r................... _: ----------------
------------------ 4.................... -------------------
[][))--[-]-----]--- 10.5 10.0 t................... 9.5 9.0 [------------------- ................... n-................... 8.5 8.0 S7nA 7.5 6.5 -..----..------------... 6.0 --- - -- - - --- - 5.5 ------------------------ ------------------- ------------------- 5.0 4.5 4.0 3.5 3.0 2.5 Downhill 2.0 ......... ...... ..... ,.... ..... ........ . ...----- ...... ....... ........ ....... . ....... ....... ........-------.......-...-.-.......--... _.---"--....--.- 7 . Side 1.5 1.0 0.5 Ant 0 . 50 100 150 200 '250 300" 2 350 "
' t Degrees 4 ;.- " - ."'A 4k"J 4
'-41"
- 2 - 4 I"'
Th 4
*-5 -6 7 -8 4
-- 13101 -1
""-13 - 14 -15 "'4'"
' Noz. End ........ 1 m"-'"='Uphill I Downhill demarcation 8:59 AM9/22/02 Nozzle 48 Chart 1 (Page/rof Page 2 of 2
I4,W$7A,ýI7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations j PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration FY4M.A=0tMZAP Ultrasonic Examination Data Sheet Customer: NM'c Plant: ,,, 8,.., Unit: I Penetration No.: Yq Procedure: "-qjs/--/s90O9 Equipment: Description VH# Cal. Due Date SN# gTomoscan i -/L7.3 A0314 16 Channel P/R ACCUSONEXI MData Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version 3.8"w Cable Length: 65'0 Type: P- 1-'M # Intermediate Connectors: I Calibration Block: "6o// 3DC/ Calibration Setup: Scan File No.: ,4.2.-99-_ C : . -' Initial Calibration File: ,* z2 - . Final Calibration File: o- .I?.J7 Scan Start: Z= ,7 "'Scan Start:,0= 0 Scan Stop: Z = -z.?7,'can Stop: 0= 3'C" Index Increment: 30 Channel Angle Serial No. Comments 1 60 . 35o/qq
?-- o IO'
/_ 13 5"_o 1"-_o_D _-
3 &0,,0- "3-So Results: *No Recordable Indicatio-n Leak Path Detected 11 Axial Flaws Detected Circumferential Flaws Detected Comments: ii KT. Analyzed by: .. Level: _ Date: - /-: "2.. Reviewed by: LLevel: Date: /J-1Z- I
- oTYPICAL DATA SHEET FIGURE 5 I $ Jro, Page 31 of 32
A
=R A M.LTOMI,1E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 49 Procedure: 54-ISI-100-09 INozzle Dimensions: (li.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 52 End of Noz. (in.): 0.94 Probe Serial No.'s: Ch i 35044 Ch 6 35052 t Ž,. I"-Stop:
deg 'e. Stop: Ch2 35202 Ch7 - n/a
,.~.~', -. ,,i , .. , .Ch3 35070 ChB n/a Circ. Scan Start:_ -Jdeg @1 0.47 I" Stop:' 365 Ideg @1 12"711" Stop: Ch4 35044 Chg n/a Files: A, . _*___-_o.o.-.7. Cal Block SIN: 60119300 Ch5 35052 Chl0 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (in.) Ratio Orientation Min Max I NRI "'__
23 ,_ 4 5 6 9 10
-11 12 13 14 is 16 Data Loc. 52 82 1112 142 172 202 232 262 1292 322 352 22 52 Degrees WELD Noz. Loc. 0 30 ' 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.94 0.94 0.94 0.94 0.94 10.94 0.94 0.94 0.94 0.S,4 0.94 0.94 0.94 Inches MAX. 3.92 4.07 4.46 4.76 5.13 5 56 5 62 5 49 5.17 4.70 4 53 4.07 3 92 lInches MIN. 2.66 2...276 3 05 3 58 3 88 4.39 4,47 4.29 3 88 3 53 3 04 2.70 2.66 lInches Comments: Measured Thickness: 0 64
- ht f 2131 dealwith an axial position of 6.2 Limited Scan? (YIN): _ N I i Analyzed by: fJA...**/,__Date: t?-.A; t- Analyzed by: 13* Date:
9/22/029:03 AM Nozzle49 ' Page 1 of 2 N
) k...
A FRAMATO0MANP Nozzle 49 Profile i!- 2 15.0 14.5 ------------------- 14.0 .................... S................... -................... 13.5 ................... .................... 13.0 ------------------
,=....................,
12.5 S................... ------------------ *................... ------------------ 7. 12.0' .................... ............... I... ------------------- 11.5 .................... ................... 11.0 ................... S.................... 10.5 ......... *........... ------------------ ------------------- . . . .. ........... r 10.0 ------------------- ------------------- 9.5 -..... . .... ... . .. ...
,i....................
9.0
.J.. ...... .......... 4....................
------------------- S.....................
8.5 -... . . . . . . . . . . . . . . . . ------------------ ,-. . . .. ... . . . .. . . . .. 4........... A......... ------------------- 8.0 ................... .................... 0) 7.5 ------------------ .................... 7.0 ------------------- 6.5 ------------------
*t....................
6.0 ................... -------------------- 5.5 ------------------ 5.0 ------------------- 4.5 S.. ............ .. .. . .. . . . . . .. --.. . . .. . . . . . . .. .Mu. . .. MO . .. . 4.0 3.5 . . .. .. .. .. .. .. .. .. .. .. ..~~~~~~~- .. .. . . . 3.0 S... . . . ... . ... . . . . .. . . . . .. . . .. .. . . .. .. . . . . ..--. 2.5 --- ---- i--- ---- ----------------------------------------- Downhill 2.0 l--- --- ---.-- --- .--- --- --- --. - -. - ---------- ---. I.--- ---.--- ------ ------- --- --- ---- --- -----. Side 1.5 -------- ------------- ---------- ---------- ---------------------------------- --
'L ;
1.0 0.5 0.0 0 50O 100 150 200 250 30'0, 350 . Degrees '
-2 -- 3 -4
-5 -6 7
--- 13 -10 --....l 12 14 _ _ 15
..-- "u-n'"UphillI Downh fill demarcation *:
Noz. End 1 9:03 AM9/22/02 Nozzle 49 Chart 1 7 . Page 2 of 2
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE I Remote Ultrasonic Examination hI Of Reactor Vessel Head Vent Line Penetrations 1 PROCEDURE NO.: 54-ISI-137"00 I___ PQ NO.: 54-PQ-137-Gi A RPV Vent Line'Vent line Data Sheet Customer: /Y/nt C Plant: Pojg/ 8e, Unit: Vent line No.: /, Procedure: 5'-q-/1/-137 - o Axial Scan Setup: , Scan Start: Z = -1. ;z Axial Scan File No.: A -ZL(, . Scan Stop: Z = .5.____ Channel Angle Serial No. 1- :O°L q-Z(,,,- OZo03 2 700S z-c.- v oZ0oo3 4 - 9;T 14,-ooo03
'_5
___- Ioloo3 Performedlby: Date: Analyzed by: , ,e-- Date: Results: o
-F-Iaws Detected Axial Flaws Detected Circ. Flaws Detected Comments: Z,*ee.'..reA. ,. .,,o /
It ... Figure 1 Ne Page 14 of 15
A CRDM Nn77In IIItrnni,,
-- - - - - --.------ 5S**
Fv2min2finn flf ULcS Qk*CL E 1 Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1. - Nozzle: Vent line Procedure: 54-ISI-137-00 with CIA FRA-02-012, PB-2-004INozzle Dimensions: (lit.) ID: 0.750 OD: 1.046 Thickness: 0.148 Downhill Side of Nozzle (deg.): 0 End of Noz. (In.): 0 Probe Serial No.'s: Chi1 9266-02003 Ch 6 n/a Axial Scab,;4 , .. Stt"l, .. Ideg : :o I .'-t6'--, -. Ide, . --'.-~Setup: ,', Ch2 9266-02003 Ch7 n/a Fi6; ~~: 6.r:V. I- Ch3 9266-02003 Ch8 n/a Circ. Scan Start: -51deg @ -1.7 " Stop: 365 Ideg @ [I j Setup:[ Ch4 9266-02003 Ch9 n/a Files: A226610.29.36, _11.00 52, _12.20 53 Cal Block SIN: 6012827D1 Ch5 9266-02003 Ch10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDlOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-2 3
4 5 6
-7 8 -9 10 12 "
13 14 T 16 _ 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 1 00 1.00 1.00 1.00 1 00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Inches MIN. 000 0.00 000 000 000 000 0.00 0.00 000 000 0.00 000 0.00 Inches Comments: Measured Thickness: @ theta of deg with an axial position of Limited Scan? (YIN): n Analyzed by: Date: bt. Analyzed by: r'.I Date: If 61 9/231025 05 PMV Data Sheet -Vent Line Page I of 2
.1-.,
Vent'Llne Profile C., rFRAMATOWE ANF I.,
'-'Ii 15.0' --I II
'.4-
--- 7--------------- I -------------------
I 14.5:. ---------- I E I 14.0 - - . ....... ---------- ------------------ ------------------- ------------------- ------------------- 13.5 ---- ----- ---.-- ---------- ------------------ ------------------- ------------------- ------------------- -- ---------------- 13.0 ........ ---------- ------------------ ------------------- ------------------- ---------------- ----- 12.5 .. . . .. . . . . .. .. . . .. . . .. .... . . ---------- ---------------- ------------------- ------------------- ------------------- 12.0 ............................ ---------- ------------------ ------------------- ------------------- ------------------- ----------------- 1 1.5 - ..--------------- ..- ------- ---------- ------------------ ------------------- ------------------- ------------------- ---------------e-. 11.0 -.-- ....------------------- ---------- ------------------ ------------------- ------------------- ------------------- ---------------- 10.5 .. . . . . . . . . .. . . . .. . .. . .. .. . . . ------------------- ------------------- 10.0 -.- .......----------- ------- I.., ------------------ ------------------- 9.5 -.--- ...-------------------
ý\------- ------------------- -------------------
------------------ ----------- ý\__-___. ------------------ -------------------
9.0 -.--- ....------------------- ---------- ------------------ ------------------ ------------------- ------------------- ------------------- 8.5 -..-- ...------------------- ---------- ------------------ ------------------ ------------------- ------------------- ------------------- cl) 8 .0 -..---------------- .- ------- ---------- ------------------ ------------------ ------------------- ------------------- -------------- X 0 7.5 -.-- ......----------- ------- ---------- ------------------ ------------------ ------------------- ------------------- i ------------------- 7.0 -..-- ...------------------- _Ij -------- ------------------ ------------------ ------------------ ------------------- ------------------- 6.5 ................... -........ ---------- ------------------ ------------------ ------------------- ------------------- --------- : --------- 6.0 -..-- ....------------------- ........... ------------------ -------------- ---- ------------------ ------------------- I ------------------- 5.5 ---------------- ------- ---------- ------------------ -------------- ---- ------------------- ------------------- ------------------- 5.0 -.--- ....------------------- ---------- ------------------ 4.5 -.-- ...------------------- ---------- ------------------ ------------------- ------------------- ------------------- 4.0 -.--- ....------------------- ---------- ------------------ ------------------ ------------------- 3.5 -.- .....------------.------. ---------- ------------------
-----------III--II
-- .4----------- ---- -------------------- ------------------- -------------------
3.0 -------I.........------.----- ---------- ------------------ ------------------ ------------------- 2.5 ---------------- ---- -- ---------- I
------------------- -------------- ----- ------------------ ---------- I......... ---------- Dowhhill 2.0 ------- ----------- ---------- ........... I------ ------------------- ----------- Side 1.5 4 1.0 -:i.......S..
- ilNg*H**
mM l .... I "no flmuamote[ g
*k=* U*kli .............
ýMmsp wkrm 1"MUNKMIUM I
Jl.. .. . *--__J P.mmum PONM "MMOM I mumov I I:i 0.5 --- - - - - -- - - - -- -I---- --- --------- -- -- - - --- i 0.0 , - I q
- _________
I 0 .5 o, . i6b " 150 200 250.. 35 0I,,
,. 7
.3grees.,- . ' ; *' , ', - ,.-=;
-2 - 3 4
-5 - 6 -7 11 -8
,. - 9 -. 10 ----..... . 12
. ,13 14 15 16
--, Noz.End ""=="kIUphill / Downhill demarcation 5:05 PM9/23/02 Data Sheet -Vent Line Chart 1 Pg 2 of Page o2,f 2}}
Text
{{#Wiki_filter:Nuclear Management Company, LLC Point Beach Nuclear Plant NMC Committed to NuclearExcellence 6610 Nuclear Road Two Rivers, WI 54241 NRC 2002-0102 10 CFR 50.54(f) November 15, 2002 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555 Docket 50-266 Point Beach Nuclear Plant (PBNP), Unit 1 Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings On August 3, 2001, the Nuclear Regulatory Commission (NRC) transmitted Bulletin (BL) 2001-01, "Circumferential Cracking of Reactor Pressure Vessel Head Penetration Nozzles." On March 18, 2002, the NRC transmitted BL 2002-01, "Reactor Pressure Vessel Head Degradation and Reactor Coolant Pressure Boundary Integrity." On August 9, 2002, the NRC transmitted BL 2002-02, "Reactor Pressure Vessel Head and Vessel Head Penetration Nozzle Inspection Programs." In BL 2001-01 the NRC requested addressees provide within 30 days after plant restart following the next refueling outage; a description of the extent of any vessel head penetration nozzle leakage and cracking detected, including the number, location, size, and nature of each crack detected. Furthermore, if cracking is detected, the report is required to include a description of the inspections, repairs, and other corrective actions taken to satisfy applicable regulatory requirements. In BL 2002-01 the NRC requested addressees provide within 30 days after plant restart following the next inspection of the reactor pressure vessel head; the inspection scope (if different than that provided in response to BL 2002-01, Item 1 .D) and results, including the location, size and nature of any degradation detected. Furthermore, the report is required to include the corrective actions taken and the root cause of the degradation. In BL 2002-02 the NRC requested addresses provide within 30 days after plant restart following the next inspection of the reactor pressure vessel head and vessel head penetration nozzles; the inspection scope and results, including the location, size, extent, and nature of any degradation (e.g., cracking, leakage, and wastage) that was detected. Furthermore, the report is required to include details of the non-destructive examination (NDE) used (i.e., method, number, type, and frequency of transducers or transducer packages, essential variables, equipment, procedure and personnel qualification requirements, including personnel pass/fail criteria), and criteria used to determine whether an indication, "shadow," or "backwall anomaly" is acceptable or rejectable.
NRC 2002-0102 Page 2 On October 16, 2002, Nuclear Management Company, LLC (NMC) completed its most recent refueling outage of Point Beach Nuclear Plant (PBNP) Unit 1. Attached to this letter is a discussion of the inspection scope and results, details of the NDE used, and the acceptability of the limited ultrasonic testing (UT) examinations performed on four of the forty-nine penetrations. Additionally, Westinghouse Electric Company performed a probabilistic analysis to determine whether the inspection results to date on PBNP Unit 1 control rod drive mechanism (CRDM) penetrations provide a risk-informed basis for pursuing a return to power. Proprietary and non-proprietary versions of the probabilistic analysis are provided in Enclosures 1 and 2, respectively. Both reports in Enclosures 1 and 2 are titled, "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations." Enclosed in this letter is a Westinghouse authorization letter, CAW-02-1559 (Enclosure 3), an accompanying affidavit (Enclosure 4), Proprietary Information Notice (Enclosure 5), and Copyright Notice (Enclosure 6). As Enclosure 1 contains information proprietary to Westinghouse Electric Company, it is supported by an affidavit signed by Westinghouse, the owner of the information. The affidavit sets forth the basis on which the information may be withheld from public disclosure by the Commission and addresses with specificity the considerations listed in paragraph (b) (4) of 10 CFR 2.790 of the Commission's' regulations. Accordingly, it is respectfully requested that the information which is proprietary to Westinghouse be withheld from public disclosure in accordance with 10 CFR 2.790 of the Commission's' regulations. Correspondence with respect to the copyright or proprietary aspects of the items listed above or the supporting Westinghouse Affidavit, should reference CAW-02-1559 and should be addressed to H. A. Sepp, Manager of Regulatory and Licensing Engineering, Westinghouse Electric Company, P.O. Box 355, Pittsburgh, Pennsylvania 15230-0355. to this letter contains the nozzle 1 examination results as presented in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This letter contains no new commitments and no revisions to existing commitments. I declare under penalty of perjury that the foregoing is true and accurate. Executed on November 15, 2002. RDS/kmd
NRC 2002-0102 Page 3
Attachment:
PBNP Unit 1 RPV Head and VHP Nozzle Inspection Discussion
Enclosures:
1 - "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations", (Proprietary) 2 - "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations", (Non-Proprietary) 3 - Westinghouse Proprietary Authorization Letter, CAW-02-1559 4 - Westinghouse Affidavit 5 - Westinghouse Proprietary Information Notice 6 - Westinghouse Copyright Notice 7 - "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report" cc (with enclosures): Project Manager, PBNP, USNRC, NRR cc (without enclosures): Regional Administrator, USNRC, Region III NRC Resident Inspector- PBNP
ATTACHMENT To Letter from A. J. Cayia (NMC) to Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01. 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings PBNP Unit 1 RPV Head and VHP Nozzle Inspection Discussion
NRC 2002-0102 Attachment "Page 2 PBNP Unit 1 Inspection Scope and Results Visual Examinations An above-head bare metal visual examination was performed on 100% of the surface area surrounding the PBNP Unit 1 vessel head penetrations (VHP). The examination was performed as described in the revised Nuclear Management Company, LLC (NMC) response to BL 2002-01, Item 1 .D, dated April 18; 2002. The examination resulted in an effective visual examination that revealed no evidence of boric acid deposition or wastage of the reactor pressure vessel (RPV)
'head. All RPV head penetrations were examined with no limitations or masking.
On April 2, 2002 the NMC provided the requested response to NRC BL 2002-01. On April 18, 2002 the NMC provided a revised response to NRC BL 2002-01. In each of these letters the NMC described a small area of apparent wastage on the PBNP Unit 1 RPV-head that occurred in the early 1970's. The description of the affected area on the RPV head was obtained from a first hand. account by an NMC staff member who was involved in repair of the RPV head insulation at the time of discovery. This area was searched for during the above-head bare metal visual examination performed on the PBNP Unit 1 RPV head during the most recent refueling outage. No evidence of the RPV head wastage described above was identified. Ultrasonic Examinations In addition to the above-head bare metal visual examination, ultrasonic examinations (UT) of the nozzle base material were performed. These examinations were performed as described in our response to BL 2002-02, Item 1 .A, dated September 12, 2002. The UT also included a "leak path" examination of each nozzle. All UT and "leak path" examinations revealed no evidence of cracking' or leakage. All nozzles without thermal sleeves (16) were examined using a rotating probe UT technique. The remaining penetrations containing thermal sleeves (33) were examined using a blade probe UT technique. -The initial blade probe UT examination of the nozzle 1 base material revealed several recordable indications.- The nozzle 1 thermal sleeve was removed to initiate repairs'and a 100% rotating UT
-was performed. Multiple transducers from both the axial and circumferential beam directions interrogated these indications during the rotating UT examination. The rotating UT results demonstrated that the indications were embedded flaws resulting from original construction J groove welding processes. These results were confirmed with the performance of two separate'
-liquid penetrant (PT) examinations. The initial UT indications seen were concluded to be a result of manufacturing defects and are not related to primary water stress cracking corrosion (PWSCC). No repairs were performed and the thermal sleeve was reattached. The nozzle 1 examination results are contained in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This report is contained in Enclosure 7. During the performance of the UT examination seven (7) penetrations with thermal sleeves initially had limitations in inspection coverage. In order to provide access to increased examination area, three (3) thermal sleeves were removed and rotating UT examinations were performed. The remaining four (4) nozzles had minor limitations in coverage as shown in Table 1. No shadow or backwall anomaly indications were identified during the performance of these examinations.
NRC 2002-0102 Attachment Page 3 Table 1 Inspection Summary Penetration(s) Coverage Description 1 100% Indications of possible fabrication-related flaw indications found through blade probe UT examination. Thermal sleeve removed to initiate repairs. 100% rotating UT performed with sleeve removed. Indications determined to be weld fabrication-related with the more accurate rotating probe UT. No indications found with confirmatory PT examination. No repairs required. Thermal sleeve reinstalled. 2-25 100% No indications. No restrictions or limitations. 26 78% No indications. Limited coverage justified through engineering analysis. 27 66% No indications. Limited coverage justified through engineering analysis. 28 52% No indications. Limited coverage justified through engineering analysis. 29 100% No indications. No restrictions or limitations. 30 50% No indications. Limited coverage justified through engineering analysis. 31 -33 100% Very limited coverage using blade probe due to physical restrictions. Thermal sleeves removed. 100% coverage obtained through use of rotating UT probe. Nozzle 32 had weld fabrication-related indications only. No flaw indications. Thermal sleeve installed. 34-49 100% No indications. No restrictions or limitations. The individual examination summary charts for nozzles 26, 27, 28 and 30 are located in Figures 1 through 4. The limited coverage on these nozzles was found to be acceptable through performance of engineering evaluations. These evaluations are described later in this document. Circ5 Axia'l Examhination Percentage 'Nozzle.J Area .;'-Length Length '78% 26 Area of Interest 0-3600 0 -6.56" Area Examined 0-2170 0-6.6" Area Not Examined 218-3060 0-6.5" Area Examined 307-3600 0-6.6" 270 d..$ Figure 1 - Nozzle 26 UT Exam Coverage
NRC 2002-0102 Attachment Page 4 Cire Examnina'tion 'Pecetg Nozzle Area, Length Axial Length 660%6 27 Area of Interest 0-3600 0 -6.56" Area Examined 0-1730 0-8.7" Area Not Examined 174-2050 0-6.5" Area Examined 206-2100 0-8.7" Area Not Examined 211-236c 0-6.56" ,o., Area Examined 237-2630 0-8.7" Area Not Examined 264-3320 0-6.56" Area Examined 333-3600 0-8.7" Figure 2 - Nozzle 27 UT Exam Coverage Cire' Axial 7..Examihnati6n Percentage -Nozzle Area Length ~:~Lenith ,. 52%, 28 Area of Interest 0-3600 0 -6.56" Area Examined 0-890 0-8.6" Area Not Examined 90-2610 0-6.56" Area Examined 262-3600 0-8.6" Figure 3 - Nozzle 28 UT Exam Coverage Circ Examiniation Per&entage ,Nozzle. Area "Lgh Aia Length , 50%, 30 Area of Interest 0-3600 0 -6.56" Area Examined 0-890 0-8.6" Area Not Examined 90-1300 0-6.56" Area Examined 131-2390 0-8.6" Area Not Examined 240-3600 0-6.56" 180* Figure 4 - Nozzle 30 UT Exam Coverage
NRC 2002-0102 Attachment Page 5 Liquid Penetrant Examinations As discussed previously, two separate liquid penetrant (PT) examinations were performed on the nozzle 1 J-groove wetted surface to characterize suspected UT indications found during initial blade probe UT examinations. The PT examinations revealed no crack indications. These results were in agreement with no indications found in separate rotating UT examinations following removal of the thermal sleeve. The initial UT indications seen were concluded to be a result of manufacturing defects and are not related to PWSCC. Acceptability of Limited UT Examination of Nozzles 26, 27, 28, and 30 As shown in Table 1, four (4) nozzles (26, 27, 28 and 30) received a UT examination of less than 100% coverage. These limited examinations have been found to be acceptable. This section describes that justification. Flaw Tolerance Evaluation Circumferential cracks located in the nozzle material are the area of prime interest due to the safety concern arising from nozzle ejection and LOCA. Therefore, a flaw tolerance evaluation, postulating a circumferential flaw in the region that was not interrogated by the UT examination was performed by Westinghouse Electric Company. The postulated flaw in this evaluation corresponds to 1800 and is consistent with the limitations documented in Figures 1 through 4. Figure 5 illustrates the time required for a postulated 1800 circumferentially oriented flaw to grow to a point of structural instability (3300) to be approximately 25 years of operation. Figure 5 is plotted as half the length of the circumferential flaw. This accounts for both ends of the flaw to growing equally. The evaluation uses plant specific stresses and operating temperature and the MRP-55 crack growth rate predictions. Based on the UT inspection results and this evaluation, there are no concerns with the structural integrity of the VHPs associated with the possibility of undetected circumferential cracking in the non-inspected areas over at least the next operating cycle. Proprietary and non-proprietary versions of the flaw tolerance evaluation (WCAP-1 4000 and WCAP-1 5950, respectively), were transmitted to the NRC by Westinghouse Electric Company on September 27, 2002.
NRC 2002-0102 Attachment Page 6 180.0o ! I I I 15000
=' 1200 - --
< ~~~CRI M N-1z. J 1 90.0 UI A I 860.0/
F ----
,,lI Service Life > 24
- 30.0,-/
00 0 10 20 30
- 40 50 period (year)
Figure 5 - Crack Growth Predictions for Circumferential Through-Wall Cracks Probabilistic Evaluation In addition to the work described above, Westinghouse Electric Company performed a probabilistic analysis. This work determined, with at least 95% confidence, that the seven penetrations with initial limitations in examination coverage would not produce an axial or circumferential flaw that would exceed the assumed critical sizes over a time interval of up to 14.5 additional effective full power years (EFPYs). This conclusion was based on conservative assumptions in average crack size, stresses influencing crack growth, and inspections performed to date. Proprietary and non-proprietary versions of the probabilistic analysis are provided in Enclosures 1 and 2, respectively. The results of the probabilistic analysis were then evaluated using the plant specific probabilistic risk assessment (PRA) to determine the potential risk significance of this activity. NMC conservatively postulated that a critical failure would lead to a medium loss of coolant accident (LOCA) with an equivalent diameter of more than 2 inches. The corresponding change in core damage frequency for this scenario was calculated to be less than 1E-6/year. These results demonstrate a very small change in plant risk and are consistent with the guidance contained within Regulatory Guide 1.174. 100% Visual and Other UT Examinations The detailed 100% UT examinations of 45 of the 49 CRDM nozzles and of the RPV head vent line, with no evidence of cracking or leakage, give assurance that PWSCC of the PBNP Unit 1 VHPs is not occurring. This is also evident in the results of the 100% visual examination performed on the RPV head exterior surface. These inspections support the evaluations previously discussed and give NMC confidence in the structural integrity of all PBNP Unit 1 VHP nozzles (including nozzles 26, 27, 28, and 30).
NRC 2002-0102 Attachment Page 7 NDE Methods and Qualifications All NDE personnel involved in these examinations and data analysis activities were certified as Level II or Level III NDE inspectors in accordance with their employer's written practices. Personnel certifications were reviewed and approved by the PBNP Level III prior to personnel performing examinations. Visual Examinations The above-head visual examinations (VT) were performed directly by qualified examiners. Additionally, a remote hand-held camera was used to record the examination images onto VCR tape. The procedures used in these VT examinations were qualified in accordance with the employer's written practices, ASME Section XI, and supplemented by'EPRI Report 1006296, Revision 1, 'Visual Examination for Leakage of PWR Reactor Head Penetrations on Top of RPV Head." Ultrasonic Examinations The detailed method of UT examinations performed is contained in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This non-proprietary report describes the number, type and frequency of transducers, essential variables, equipment, and procedures. This report is contained in . A qualification program similar to the ASME Section XI, mandatory Appendix VIII, "Performance Demonstration For Ultrasonic Examination Systems," does not exist for UT testing of the VHP nozzle base material. Framatome ANP was the vendor that performed UT examinations during this most recent PBNP Unit 1 outage. As part of the EPRI MRP, Framatome ANP recently participated in a demonstration of the UT techniques used for detection of axial and circumferentially oriented flaws in the RPV head penetration tube material. These techniques and capabilities were demonstrated in blind testing that was attended by NRC reviewers. Framatome ANP has recently developed the "leak path" UT technique used in the PBNP Unit 1 examinations. It is a proprietary technique that has no formal qualification program. The "leak path" UT technique uses empirical data from the examination of approximately 270 nozzle penetrations. In examinations of VHPs since March 2001 with known bare metal visual leakage where the interference fit has been scanned, a UT "leak path" has been observed. Framatome has presented the "leak path" UT technique to the NRC for review on several occasions. The technical basis of this technique is described in a Framatome ANP proprietary document entitled, "Reactor Vessel Head Penetration Leak Path Qualification Report," dated February 6, 2002. Liquid Penetrant Examinations All personnel and procedures involved in the PT examinations were qualified in accordance with ASME Sections V and XI. The first PT was performed to the Framatome ANP procedure 54-ISI-244-06, "Liquid Penetrant Examination of Reactor Vessel Head Penetration from the Inside Surface." The second PT was performed to PBNP procedure NDE-451, "Liquid Penetrant Examination Temperature Applications 45 OF to 125 OF."
ENCLOSURE 2 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations" (Non-Proprietary)
Westinghouse Non-Proprietary Class 3 Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations
In its Fall outage of 2002, Point Beach Unit 1 Nuclear Power Plant attempted to inspect all 49 of its control rod drive mechanism (CRDM) penetrations but could not provide 100% inspection coverage of 7 of the penetrations. The purpose of the work documented in this letter report is to provide a probabilistic analysis to determine whether the inspection results to date on Point Beach Unit 1 CRDM penetrations can provide a risk-informed basis for pursuing a contemplated return to power, with inspections of the 7 partially examined penetrations at a future outage. Summary of Approach: The approach is to first establish the maximum number of axial and circumferential flaws that may be left in the base metal of the tubing for the 7 partially-inspected Unit 1 CRDM penetrations with 95% confidence that no one flaw will exceed the pertinent critical flaw size during the desired time interval. This calculation uses a probabilistic model derived from extreme value theory, with values for inputs (critical sizes and crack growth rates) taken from a recently-completed structural reliability study for Point Beach units 1 and 2 (WCAP14000). The maximum allowable number is then compared with the upper 95% confidence value on flaws projected to currently be in Unit l's set of CRDM penetrations based on a simple statistical evaluation of sample inspections to date. If the maximum allowable flaw number exceeds the upper confidence limit number, then it can be claimed with at least 95% confidence that the plant can return to power and operate for the contemplated interval without a flaw in the subject unit's CRDM penetrations progressing to its critical size. Summary of Results: Using this approach, the analysis concludes, with at least 95% confidence, that the 7 incompletely inspected penetrations of interest will not produce an axial or circ flaw that will exceed the assumed critical sizes over a time interval of up to 14.5 additional effective full power years (EFPY). This conclusion is based on conservative assumptions as to average crack size, to stresses influencing crack growth, and to inspections performed to date. Specifically, the distribution of flaws remaining in the 7 penetrations is assumed to have a mean depth of "through wall" with a length of 3 inches. Cracks grow at a rate consistent with the most stressed (outer layer) of the CRDM penetrations. No credit is taken for partial inspections. It should be noted, however, that no welds were inspected and no inferences are made here about weld integrity. Descriotion of the Work Performed (a, c)
Results Equation (2) is used to calculate the probability of the ith flaw in each sub-lot reaching full critical length (Table 2) within operating intervals ranging from 1 to 15 effective full power years for axial
and circ flaws. Equation (5) uses the probabilities in Table 2 and the target reliabilities of 95% to calculate the allowable number of flaws in the 7 penetrations for operating intervals out to 15 additional ("Target") EFPY shown in Table 3. Comparing Table 3 to the upper confidence number of 1 calculated above, the circ cracks limit the number of additional EFPY that Point Beach Unit 1 can go without inspecting the 7 subject penetrations to 14.5 EFPY. That is, at 14.5 additional EFPY the number of allowable leaks just matches the number of circ flaws that we are 95% confident will not be exceeded. We can thus say with at least 95% confidence that the 7 partially inspected penetrations will not generate a critical axial or circ flaw over a future ranging up to 14.5 EFPY. Table 2" Probability ith Flaw > Critical Length Before Target EFPY Target EFPY Axial Circ 1 1.16E-04 1.80E-03 1.5 1.78E-04 2.76E-03 2 2.43E-04 3.76E-03 2.5 3.1OE-04 4.80E-03 3 3.81 E-04 5.88E-03 3.5 4.55E-04 7.01E-03 4 5.32E-04 8.18E-03 4.5 6.12E-04 9.41E-03 5 6.96E-04 1.07E-02 5.5 7.84E-04 1.20E-02 6 8.76E-04 1.34E-02 6.5 9.71E-04 1.48E-02 7 1.07E-03 1.63E-02 7.5 1.18E-03 1.79E-02 8 1.28E-03 1.95E-02 8.5 1.40E-03 2.12E-02 9 1.52E-03 2.29E-02 95 1.64E-03 2.48E-02 10 1.77E-03 2.67E-02 10.5 1.91E-03 2.87E-02 11 2.05E-03 3.07E-02 11.5 2.20E-03 3.29E-02 12 2.35E-03 3.51E-02 12.5 2.51E-03 3.75E-02 13 2.68E-03 3.99E-02 13.5 2.86E-03 4.25E-02 14 3.04E-03 4.51E-02 14.5 3.24E-03 4.78E-02 15 3.44E-03 5.07E-02
Table 3. Allowable Number of Flaws @ 100% Criticsel Size 17 Tuibes* Target EFPY Axial Circ 1 7.0 7.0 1.5 7.0 7.0 2 7.0 7.0 2.5 7.0 7.0 3 7.0 7.0 3.5 7.0 7.0 4 7.0 6.2 4.5 7.0 5.4 5 7.0 4.8 5.5 7.0 4.2 6 7.0 38 6.5 7.0 3.4 7 7.0 3.1 7.5 7.0 2.8 8 7.0 2.6 8.5 7.0 2.4 9 7.0 2.2 9.5 7.0 2.0 10 7.0 1.9 10.5 7.0 1.8 11 7.0 1.6 11.5 7.0 1.5 12 7.0 1.4 12.5 7.0 1.3 13 7.0 1.3 13.5 7.0 1.2 14 7.0 1.1 14.5 7.0 1.0 15 7.0 1.0 Addendum on Use of Table 2 in a Reaulatorv Guide 11 174 Analysis Addendum on Use of Table 2 in a Reoulatorv Guide 174 Analvqis Regulatory Guide 1.174 suggests that a contribution to plant risk is "small" if (1) the contribution to plant CDF is no more than IE-6, and (2) the contribution to plant LERF risk is no more than lE-7. The probabilities in Table 2 cannot be used in to support a Regulatory Guide 1.174 risk analysis without first accounting for the likelihood of the ith tube having a leak now. Using only the sample information from Point Beach Unit l's latest inspection and, in Bayesian terms, assuming a "prior" uniform distribution between 0 and 1 on the probability that any one penetration would have a leak, it can be shown that the mean or expected value of the subject probability (now treated as a random variable) is (Martz and Waller, page 257),
(6) p= x+1 n1+2 where x = the number of leaks found in the inspections and n = the number of penetrations inspected. Using the same value (43) as before and setting x equal to zero, the estimated value for the probability that a given penetration would have a leak is 1/(43+2) = 0.022. If the latter is taken as the probability that a penetration will have a through wall circ leak of average size assumed in calculating Table 2 (i.e., 3 inches), then the unconditional probability that the ith penetration will have a critical circ leak by, say, 1.5 Target EFPY is 0.022*2.76E-3 = 6.14E-5, (where the 2.76E-3 comes from Table 2). One further note. The Regulatory Guide 1.174 criteria are expressed in terms of frequency of event per reactor year. The probability of the ith penetration leaking over multiple years must therefore be converted to an equivalent per year basis. References Bain, L. J., Statistical Analysis of Reliability and Life Testing Models, Marcel Dekker, Inc., 1978. Bamford, W. H., and D. Tang, "Structural Integrity Evaluation of Reactor Vessel Upper Head Penetration to Support Continued Operation: Point Beach Units 1 and 2," Westinghouse Proprietary document (WCAP-14000), Revision 1, September 2002. Cunningham, M. A., "Statistical Analysis of CRDM Sampling (Revision)", memo of August 17, 2001 to W. H. Bateman, Office of Nuclear Reactor Regulation, Nuclear Regulatory Commission. Kapur, K. C., and L. R. Lamberson, Reliability in Engineering Design, John Wiley and Sons, 1977. Martz, H. F., and R. A. Waller, Bayesian Reliability Analysis, Krieger Publishing Co., 1991. Tomes, C. A., "Probability of Not Detecting a Flaw in Unexamined Penetrations," email to Warren Bamford, September 30, 2002. U.S. Nuclear Regulatory Commission Regulatory Guide 1.174, "An Approach to Using PRA in Risk-Informed Decisions on Plant-Specific Changes to the Licensing Basis," July 1998.
ENCLOSURE 3 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Proprietary Authorization Letter, CAW-02-1559
Westinghouse Westinghouse Electric Company Nuclear Services P.O Box 355 Pittsburgh, Pennsylvania 15230-0355 USA U.S. Nuclear Regulatory Commission Directtel: (412) 374-5282 Document Control Desk Direct fax: (412) 374-4011 Washington, DC 20555-0001 e-mail: Sepplha@westinghouse.com Attention: Mr. G. Shukla Our ref: CAW-02-1559 October 11, 2002 APPLICATION FOR WITHHOLDING PROPRIETARY INFORMATION FROM PUBLIC DISCLOSURE
Subject:
Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations (Final - Proprietary Version);
Dear Mr. Shukla:
The proprietary information for which withholding is being requested in the above-referenced report is further identified in Affidavit CAW-02-1559 signed by the owner of the proprietary information, Westinghouse Electric Company LLC. The affidavit, which accompanies this letter, sets forth the basis on which the information may be withheld from public disclosure by the Commission and addresses with specificity the considerations listed in paragraph (b)(4) of 10 CFR Section 2.790 of the Commission's regulations. Accordingly, this letter authorizes the utilization of the accompanying Affidavit by Nuclear Management Company. Correspondence with respect to the proprietary aspects of the application for withholding or the Westinghouse affidavit should reference this letter, CAW-02-1559 and should be addressed to the undersigned. Very truly yours, H. A. Sepp, M nager Regulatory and Licensing Engineering Enclosures Cc: G. Shukla/NRR A BNFL Group company
ENCLOSURE 4 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Affidavit
CAW-02-1559 AFFIDAVIT COMMONWEALTH OF PENNSYLVANIA: ss COUNTY OF ALLEGHENY: Before me, the undersigned authority, personally appeared H. A. Sepp, who, being by me duly sworn according to law, deposes and says that he is authorized to execute this Affidavit on behalf of Westinghouse Electric Company LLC ("Westinghouse"), and that the averments of fact set forth in this Affidavit are true and correct to the best of his knowledge, information, and belief:
'a1 H. A. Sepp, Manager ........ Regulatory and Licensing Engineering 1'; ,git" Sworn to and subscribed before me this /1'.* day of ef ? ,2002 Notary Public Nota Sea]
Margaret L Gonano, Notary Pubric Monhvevile Boro, .Aeghe**y County My Comiso Exprem Jan. 3,2006 Member. Pennelivania Assodabn Of Notarfte
2 CAW-02-1559 (1) 1 am Manager, Regulat6ry and Licensing Engineering, in Nucleai- Services, Westinghouse Electric Company LLC ("Westinghouse"), and as such, I have been specifically delegated the function of reviewing the proprietary information sought to be withheld from public disclosure in connection with nuclear power plant licensing and rule making proceedings, and am authorized to apply for its withholding on behalf of the Westinghouse Electric Company LLC. (2) I am making this Affidavit in conformance with the provisions of 10CFR Section 2.790 of the Commission's regulations and in conjunction with the Westinghouse application for withholding accompanying this Affidavit. (3) I have personal knowledge of the criteria and procedures utilized by the Westinghouse Electric Company LLC in designating information as a trade secret, privileged or as confidential commercial or financial information. (4) Pursuant to the provisions of paragraph (b)(4) of Section 2.790 of the Commission's regulations, the following is furnished for consideration by the Commission in determining whether the information sought to be withheld from public disclosure should be withheld. (i) The information sought to be withheld from public disclosure is owned and has been held in confidence by Westinghouse. (ii) The information is of a type customarily held in confidence by Westinghouse and not customarily disclosed to the public. Westinghouse has a rational basis for determining the types of information customarily held in confidence by it and, in that connection, utilizes a system to determine when and whether to hold certain types of information in confidence. The application of that system and the substance of that system constitutes Westinghouse policy and provides the rational basis required. Under that system, information is held in confidence if it falls in one or more of several types, the release of which might result in the loss of an existing or potential competitive advantage, as follows: (a) The information reveals the distinguishing aspects of a process (or component, structure, tool, method, etc.) where prevention of its use by any of
3 CAW-02-1559 Westinghouse's competitors without license from Westinghouse constitutes a competitive economic advantage over other companies. (b) It consists of supporting data, including test data, relative to a process (or component, structure, tool, method, etc.), the application of which data secures a competitive economic advantage, e.g., by optimization or improved marketability. (c) Its use by a competitor would reduce his expenditure of resources or improve his competitive position in the design, manufacture, shipment, installation, assurance of quality, or licensing a similar product. (d) It reveals cost or price information, production capacities, budget levels, or commercial strategies of Westinghouse, its customers or suppliers. (e) It reveals aspects of past, present, or future Westinghouse or customer funded development plans and programs of potential commercial value to Westinghouse. (f) It contains patentable ideas, for which patent protection may be desirable. There are sound policy reasons behind the Westinghouse system which include the following: (a) The use of such information by Westinghouse gives Westinghouse a competitive advantage over its competitors. It is, therefore, withheld from disclosure to protect the Westinghouse competitive position. (b) It is information that is marketable in many ways. The extent to which such information is available to competitors diminishes the Westinghouse ability to sell products and services involving the use of the information. (c) Use by our competitor would put Westinghouse at a competitive disadvantage by reducing his expenditure of resources at our expense.
4 CAW-02-1559 (d) Each component of proprietary information pertinent to a particular competitive advantage is potentially as valuable as the total competitive advantage. If competitors acquire components of proprietary information, any one component may be the key to the entire puzzle, thereby depriving Westinghouse of a competitive advantage. (e) Unrestricted disclosure would jeopardize the position of prominence of Westinghouse in the world market, and thereby give a market advantage to the competition of those countries. (f) The Westinghouse capacity to invest corporate assets in research and development depends upon the success in obtaining and maintaining a competitive advantage. (iii) The information is being transmitted to the Commission in confidence and, under the provisions of 10CFR Section 2.790, it is to be received in confidence by the Commission. (iv) The information sought to be protected is not available in public sources or available information has not been previously employed in the same original manner or method to the best of our knowledge and belief. (v) The proprietary information sought to be withheld in this submittal is that which is appropriately marked in the report, "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations," (Proprietary), being transmitted by the Nuclear Management Company letter and Application for Withholding Proprietary Information from Public Disclosure, to the Document Control Desk, Attention Mr. G. Shukla. The proprietary information as submitted for use by Westinghouse Electric Company LLC for Point Beach Unit 1 is expected to be applicable for other licensee submittals in response to certain NRC requirements for justification of continued safe operation of Point Beach Unit 1. This information is part of that which will enable Westinghouse to: (a) Assess the risk with unexamined CRDM penetrations.
5 CAW-02-1559 (b) Assist the customer in obtaining NRC approval. Further this information has substantial commercial value as follows: (a) Westinghouse plans to sell the use of similar information to its customers for purposes of meeting NRC requirements for licensing documentation. (b) Westinghouse can sell support and defense of continued safe operation with the presence of cracks in a control rod drive head penetration. (c) The information requested to be withheld reveals the distinguishing aspects of a methodology which was developed by Westinghouse. Public disclosure of this proprietary information is likely to cause substantial harm to the competitive position of Westinghouse because it would enhance the ability of competitors to provide similar support documentation and licensing defense services for commercial power reactors without commensurate expenses. Also, public disclosure of the information would enable others to use the information to meet NRC requirements for licensing documentation without purchasing the right to use the information. The development of the technology described in part by the information is the result of applying the results of many years of experience in an intensive Westinghouse effort and the expenditure of a considerable sum of money. In order for competitors of Westinghouse to duplicate this information, similar technical programs would have to be performed and a significant manpower effort, having the requisite talent and experience, would have to be expended. Further the deponent sayeth not.
ENCLOSURE 5 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Proprietary Information Notice
, C CAW-02-1559 PROPRIETARY INFORMATION NOTICE Transmitted herewith are proprietary and/or non-proprietary versions of documents furnished to the NRC in connection with requests for generic and/or plant-specific review and approval. In order to conform to the requirements of 10 CFR 2.790 of the Commission's regulations concerning the protection of proprietary information so submitted to the NRC, the information which is proprietary in the proprietary versions is contained within brackets, and where the proprietary information has been deleted in the non-proprietary versions, only the brackets remain (the information that was contained within the brackets in the proprietary versions having been deleted). The justification for claiming the information so designated as proprietary is indicated in both versions by means of lower case letters (a) through (f) located as a superscript immediately following the brackets enclosing each item of information being identified as proprietary or in the margin opposite such information. These lower case letters refer to the types of information Westinghouse customarily holds in confidence identified in Sections (4)(ii)(a) through (4)(ii)(f) of the affidavit accompanying this transmittal pursuant to 10 CFR 2.790(b)(1).
ENCLOSURE 6 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findin-qs Westinghouse Copyright Notice
CAW-02-1559 COPYRIGHT NOTICE The reports transmitted herewith each bear a Westinghouse copyright notice. The NRC is permitted to make the number of copies of the information contained in these reports which are necessary for its internal use in connection with generic and plant-specific reviews and approvals as well as the issuance, denial, amendment, transfer, renewal, modification, suspension, revocation, or violation of a license, permit, order, or regulation subject to the requirements of 10 CFR 2.790 regarding restrictions on public disclosure to the extent such information has been identified as proprietary by Westinghouse, copyright protection notwithstanding. With respect to the non-proprietary versions of these reports, the NRC is permitted to make the number of copies beyond those necessary for its internal use which are necessary in order to have one copy available for public viewing in the appropriate docket files in the public document room in Washington, DC and in local public document rooms as may be required by NRC regulations if the number of copies submitted is insufficient for this purpose. Copies made by the NRC must include the copyright notice in all instances and the proprietary notice if the original was identified as proprietary.
ENCLOSURE 7 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report"
A FRAMATOME ANP 0 Point Beach Aý 7-I ftubqw October 5, 2002 Revision 0 Prepared by: Date: 10/5/02 M. W. Key, UT-Level IIISC
A FRAMATOME ANP Record of Revision Revision 0 Initial issue 2
A FRAMATOME ANP EXAMINATION
SUMMARY
Automated ultrasonic examinations of 49 CRDM nozzles and vent line nozzle were performed on the Point Beach Unit 1 Reactor Vessel Head. The examinations were conducted from beneath the head using the SUMO Rocky manipulator, USA Blade Tool, and Bottom Up Rotating Tool. Framatome ANP examination procedure 54-ISI 100-09, "Remote Ultrasonic Examination 'of Reactor Head Penetrations" was used to perform the examination that governs the remote automated contact ultrasonic examination of CRDM nozzles using the ACCUSONEXTM automated data acquisition and analysis system. The techniques utilized for this examination are intended for the detection and through wall (depth) sizing of axial and circumferential IDand OD initiating flaws greater than
.079" (2 mm) in the nozzle base metal only. In addition, leak path techniques were employed for the detection of fluid flow on the nozzle OD surface above the J-groove weld. Forward scatter (TOFD) longitudinal-wave and backward scatter shear wave techniques are used. The examinations were conducted from the bore of the CRDM nozzles from the bottom end of the nozzle up to a point nominally 2" above the uphill side of the nozzle J-groove weld.
The inspections consisted of scanning for axial and circumferential flaws within the nozzle. The bottom up tooling consisted of a transducer head that holds 10 individual search units. These search units were divided into two sets, one for the axial beam direction and one for the circumferential beam direction. The axial beam direction set of search units consisted of 5.0 MHz, longitudinal wave forward scatter time of flight search units with angles of 300 and 450; backward scatter pulse echo, 2.25 MHz 600 shear wave search units; and a 5.0 MHz 00 search unit. The circumferential beam direction set of search units consisted of 5.0 MHz, longitudinal wave forward scatter time of flight search units with angles of 450, 550, and 650; backward scatter pulse echo, 2.25 MHz 600 shear wave search units; and a 5.0 MHz 00 search unit. Appendix A contains printouts for system setup, calibrations files and scan parameters. The USA Blade tooling consisted of a single Circ-blade probe designed to emit ultrasound along the long axis of the nozzle. The 'axial beam search unit consisted of 5.0Mhz, longitudinal wave forward scatter time of flight search unit with an inspection angle of 500. The detection of flaw indications is based upon the expected responses for each search unit and technique. The 00 transducer provides weld position information due to lack of backwall response in the region of the flaw. The forward scatter time of flight techniques provides flaw detection and sizing information. For the forward scatter transducers, flaw detection is identified by loss of signal response either from the lateral wave or backwall responses as well as detection of crack tip diffracted responses. The 600 shear wave transducer provides detection by means of corner trap responses between the flaw and nozzle surface and sizing with tip diffracted signals. 3
A FRAMATOME ANP The bottom-up tool was positioned with the "Z" axis (axial) zeroed at the bottom of the nozzle with the positive direction extending up into the nozzle. The 'Theta" (rotational) axis was zeroed at the downhill side of the nozzle J-groove weld with. the positive direction in the counter-clockwise direction while looking up from the bottom of the nozzle (Nozzle 1 was zeroed at vessel "W" axis which is inline with the vent line nozzle). The ultrasonic data is adjusted for individual transducer offsets in the transducer head to provide actual reflector location in the nozzle. Of the 49 nozzles examined, one nozzle (1) contained a recordable fabrication indication in the nozzle wall. In most nozzles, these indications were located predominately on the downside of the weld and identified by multiple transducers from both axial and circumferential beam directions. These indications were characterized as embedded volumetric fabrication flaws resulting from the J-groove welding process. See Fiqure 1 for reporting criteria for fusion zone indications. The examination of the remaining 48 nozzles and vent line did not reveal any recordable indications. However, it was noted on the examination data sheets that fabrication type flaws were detected at the nozzle/J-groove weld fusion zone with no penetration into the nozzle. All nozzles with the exception of #26, #27, #28 and #30 received 100% coverage for the areas requiring examination as defined by the governing procedure (54-ISI-100-9). The nozzles with limited scan coverage are as follows: Circ .. Axial :ExaminationPercentage Nozzl A rea Leth Lrt7.478 26 Area of Interest 0-3600 0 -6.56" Area Examined 0-2170 0-6.6" Area Not Examined 218-3060 0-6.5" Area Examined 307-3600 0-6.6" / 4
A FRAMATOME ANP @6
.,..-'>Circ "Exkamination6Percentagez Nozzle ."Area' 'Length. 'AkiiaLength___________
0,0 27 Area of Interest 0-3600 0 -6.56" Area Examined 0-1730 0-8.7" Area Not Examined 174-2050 0-6.5" Area Examined 206-2100 0-8.7" Area Not Examined 211-236° 0-6.56", Area Examined 237-263' 0-8.7" Area Not Examined 264-332o 0-6.56" Area Examined 333-3600 0-8.7"
-~ ~~: .Cic,: Aklal; 'Examination,Percentae
'Nozzle ;ýAiea, <Leth -Lengthr -52%0 28 Area of Interest 0-3600 0 -6.56" Area Examined 0-89* 0-8.6" Area Not Examined 90-2610 0-6.56" Area Examined 262-3600 0-8.6" 2' go "gT..
Examination Percentage Na Axial Length' 50 30 Area of Interest 0-360° 0 -6.56" °,., Area Examined 0-890 0-8.6" Area Not Examined 90-1300 0-6.56" Area Examined 131-2390 0-8.6" 2"tO O.W. Area Not Examined 240-3600 0-6.56" 5
A FRAMATOM E ANP SYSTEM CALIBRATION The ultrasonic system consists of the essential equipment required to perform the examinations. The equipment for the CRDM examinations is made up of ultrasonic equipment that must be calibrated in order to provide a 'time base and amplitude response traceable to a known reference standard. The system consists of the R/D Tech pTomo, remote pulser, transducers, interconnecting cables, and the acquisition and analysis software. i Prior to the examinations, the system is calibrated using the appropriate equipment. The equipment considered as essential variables used for each examination is documented on the examination data sheet. The calibrations are established by entering transducer/application specific parameters into the acquisition program calibration setup. A dynamic scan of the calibration block is performed with the pre-established parameters. The data analyst evaluates the data from the calibration block and makes the necessary adjustments in the acquisition calibration setup to provide an accurate system calibration. Once the adjustments are made, an additional scan of the calibration block is performed, which becomes the system initial calibration. The procedure requires intermediate calibration checks to be performed periodically throughout the examinations. At the discretion of the analyst, the intervals between the calibration checks may be extended based upon continued satisfactory performance of the system. This is verified by observing the characteristics of the transducers during the examinations. The lateral wave of the TOFD transducers, the backwall responses for either the shear or longitudinal wave components of the transducers, and the signal to noise levels are used to make this evaluation. During the course of the examinations of the Midland Replacement Head CRDM nozzles, which spanned a 13-day period, the performance of each transducer was monitored during acquisition and verified by the analyst following completion of scanning of each nozzle. No system degradation was observed during the examination period, thus intermediate calibration checks were not performed. The requirement is more for security in reducing the amount of lost data if the system calibration is compromised, rather than a technical basis. A dynamic scan of the calibration block serves as the final calibration at the end of the series of examinations. The data file identification provides a date and time stamp identifying when each data acquisition is started. This time is used for tracking of the calibrations and examinations. The file designation is broken down into the following: F2179_07.52.33 Hour, minute, second Day of the year, in this case the 179th day (06/28) Year 2002 6
A FRAMATOME ANP Reporting Criteria for Fusion Zone Indications Closure Head 0.060" Nom. Weld Dilution Zone "IJ-grooveWeld CRDM Nozzle Indications detected within 0.060" of the tube OD in the weld region are reported as weld fabrication flaws in the weld. Indications greater than 0.060" from the tube OD in the region of the weld are considered recordable conditions and are reported separately on the data sheets. Those indications that are observed at depths greater than 0.060" from the tube OD are characterized as embedded volumetric weld fabrication flaws resulting from excessive localized dilution into the tube wall where slag was entrapped. Figure 1 7
A F RAMATOME ANP APPENDIX A SYSTEM SETUP. CALIBRATION RECORDS. SCAN PARAMETERS Circ Blade ProbeRecords: 8
A FRAMATOME ANP Circ Blade Probe (continued): 9
A FRAMATOME ANP I . Rotating Probe Records (ChI to 6): 10
A FRAMATOME ANP Rotating Probe (Chl to 6) (continued): 11
A FRAMATOME ANP Rotating Probe (ChI to 6) (continued): 12
A FRAMATOME ANP I Rotating Probe (ChI to 6) (continued): 13
A FRAMATOME ANP I f Rotating Probe Records (Chl to 4): 14
A FRAMATOME ANP I Rotating Probe (Chl to 4) (continued): 15
A FRAMATOME ANP Rotating Probe (Chl to 4) (continued): 4 Channel 3 not used 16
A FRAMATOMEANP Vent Line Probe Records (Chl to 5): 17
A I FRAMATOME ANP I . Vent Line Probe (Chl to 5) (continued): 18
A FRAMATOME ANP Vent Line Probe (Chl to 5) (continued): 19
L404 Q)Ii~4 ~ tI I ii-i
-e
'k, Status Summary of PBNP Unit I RV He "RDM
--,4 --
Inspections li9... _ ,_a.. -l 'O ,,. I- " .1 Zt-Pen Visual Examination PT Examination UT Examination Leak Path Source of Leak
# - - Examination 26 , iJ I Sus Lim Report NA I Report NI I- 2i Li e;'.I*Report
, _____ * ' NI II- AA0""' Lim " Report "°" NA Identified Report 27 N I . _,_ - t Al'qz c 0T (' __._.,_"_"_
29 ___ - ._.-_ / y 30 -_
' ~
~1~ , _
~ __
4 17--_ 12.4-- fr* -4' _ _ _ 31 33 32-- , A -l-14q _ -~-_ A _ _ _ 34 - -c--
-* -T,, A 't S 35 ____ ___ /t e7 It0")
6 pe 36 37 1 - - _.,, ..0..,o
. i/...4ti 38 -v!
*, I, Y_"__-
39 ii - 17
":1.127F, 40_
41 ,
"Z-LVr,1 -_
a~v2U7 42 - -- - - - ( _ 43 I 44 JA 9k ,_
" *- 'a*r P_ .- - *
'Af, ua..
4 46 47 - - I 16 A0.0' ."7. 48 - -ae1 b/, 7;,.1-. "_ VL 49 - - -I - -% I z I_ ifZ4C...- & ?o6, 191,, . c
, 11 __ _ _ _ _ _
DI T~L :-IIdI i U ra ao eAN rpos ilt ak_ 101 1)llt~L UlIoxe; Pramatome ANt' responsibility C- 110. Ck- I kc Ak * ?oTA-nP& P9o6i5 L ,C A;* ;r*-1 t, R e,-X M A -
PBNP Unit 1 RV Head CRDM Flaw Evaluation Data Pen Orientation of Flaw Location of Flaw Vertical Circ Location gf Pen Actual Flaw Sizing Source Ind ID 0 Location of Flaw Flaw Row Thick- Figure axial I circ bot ID OD_ Sub W BW WA Uphill Downhill ness A/L Depth Length Liga I I h I ratio ment A B C D E F G H I J K L M _ I I1 REFER TO Framatome ANP SPREADSHEET\,FOR DATA LOCATIONS ITEMS F, L, AND M ARE NtiriO; DATA ENTRY LOCATIONS
A FRAMATeMIA AtjIF CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: A Procedure: 54-1S1-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): End of Noz. (in.): Probe Serial No.'s: Ch i Ch 6 n/a A*I'. ati'. t6-- Ch2 n/a Ch7 - n/a 451, / , f' 3' Ch 3 f/a Ch 8 n/a Circ. Scan Start: jdeg @L J" Stop: [ Jdeg @L " Stop: Ch4 n/a Ch9 n/a Flies: Cal Block SIN: Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 C D E D E -_- - I H B _ 2
-3 -4 -5 -6 7
8 9
'10 11 12 13 14 15 16 17 Data Loc, 0 30 60 90 120 150 ISO 210 240 "270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 1240 270 300 330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. IInches MIN. Inches Comments: Measured Thickness:l G (*theta of degl with an axial position of Limited Scan? (IYN):I Analyzed by: Date: Analyzed by: Date:
9/21/0212:29 PM Data Sheet - Blade Page I of 2
A PRAMATOMC ANP Nozzle Profile DEK 15.0 I I I I I 14.5 ------ - - 4 lt
-. 7 14.0 -------- -- -------- ------------------- -7 ,
- 13. -~,;
-- --- ---------- ---------------- 44 4 13.0 ------------------ ------------------ ------------------
12.5 4----*4-4---4-4
- ----------------- 4
. 4..
4.444 j... ....... 44%-- Uphill
- , 11 '- I I -I 12.0 .4 44- -- -- -- ---------------- ------------------ Side 11.5 ------------------ ------------------ ------------------
4Z--- -4 - 444 . .4- - - - 11.0 ------------------ ------------------ ------------------ - --- 4---- - 4- .- -- - - - 4 -- - 10.5 ------------------ ------------------ ------------------ 4 4 -- 44--- -- 4 10.0 ------------------- ------------------ ---------- ------
--- -- 44---
-- -j ------ -
9.5 ------------------ ------------------ ---------- ...... 9.0 ------------------ ------------------ ------------------ 8.5 ------------------- ------------------ ------------------ In 0 8.0 ------------------ ------------------ ------------------ 7.5 ------------------ ------------------ ------------------ 7.0 ------------------ ------------------ ------------------ 6.5 4. 5 . . ... ------------------- ------------------- ------------------ 6.0 -- - - --- - - - ---
------------------- ------------------- ------------------ 44 4 .. 4 4 5.5 ------------------- ------------------ ------------------
5.0 *------------ ------------------- ------------------ ------------------ - - 4--- - - 4. *47 4' 4---.--- 4.5 -- - -- 4-r 4
-44 p 4
- - '4 444J' 4--.
'--j-j-4 4.0 j--
3.5 -- I 3.0 --vt' -- --- 4 ------------------- ------------------ ------------------ 4.444 44 44, --- 4 t.-- - -- - -- - Downhill 2.5 ----------------- ------------------ ------------------ ----
---- --- 7".,-
2.0 ---------- ------------------- ------------------ Side 1.5 ---- --- --- ------------- 1.0 ----------- 0.5 7 7 7, 0.0 . -... .- I, . m-. I-mm 4kkimlm . . 0 50 100 150 200 250 300 350 Degrees I -2 3 -4
-5 -6 -7 .8
-9 -10 11 -12
-13 ------- 14 15 -- 16 inNoz. End -11 "um-v Uphill / Downhill demarcation 12:40 PM9121/02 Data Sheet - Blade Chart 1 Page 2 of 2 1%
FRAMATOCME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 I / ' PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 r 1Reactor Head Penetration
;:RA,&MAZ0MZ .AAM Ultrasonic Examination D.ata Sheet Customer: NMC L[Plant: 8b1' B,,, l Unit:
Penetration No.: / ' Procedure: ' Equipment: Description VH# Cal. Due Date SN# gTomoscan 2z-/ 7o -n 16 Channel PiR I/N ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3-5 9 Cable Len th: 5o0 Type: iRL- I- # Intermediate Connectors: I Calibration Block: & p1//1q3v, Calibration Setup: A21'7 3
,if-7 ? 4 -
A. q qu. I, 51.
-Scan File No.: Initial Calibration File: A 4Z.
A z /L/ 5Y. 5-%I Final Calibration File: 42Z*3JL' ,,".qt Scan Start: Z = -3.t, "Scan Start: 0 =- Scan Stop: Z = /t--.//`Scan Stop: 0 ='" Index Increment: 30 Channel An le Serial No. Comments
/ 6' . 3 oq0W Z 3-3 .. 5zoZ -roF D 3 &oI0 35c0lo 4I"L,5'f I -- O,¢z
&,Cr36 1 S15& i¶'
& 0*6 36052-.
7WQ? 35101 1-D~
"` ( z) . o-S" "5"+0 Results: No Recordable Indication*s Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: / / ,Date: Reviewed by: Level: Date: -z TYPICAL DATA SHEET FIGURE 5 ;, roIAvl/ Page 31 of 32
0 A CROM NozzlA
.. - *. 1Iltrnnir
.... FY2min2finn 4**U fl2f2 4LL4 haaf 55h Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 " Nozzle: -I Procedure: 54-ISi-100-09 INozzle Dimensions: (is.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch 1 35044 Ch 6 35052
- i-'t ?A; e ,-Stb p: 01,, , ,..'S~ tui:I ." Ch2 35202 Ch7 35202 4$-,* *,Ch 3 35070 Ch8 35070 Circ. Scan Start:L[ sJdeg @1 -3.6 " stop:I 365 Ideg @1 1641j' Setup: 1* Ch4 35044 Ch9 not active Files: A2273_14.54.39 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 35048 Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI -
2 3 4
-6 7
9 10 11 12 13 14 15 18 17
-w Data Loc. 0 30 60 90 120 150 180 210 240 270 1300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 1.50 180 1 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 _ 0.00 0.00 ...0.00 0.00 0.00
_ _ 0.00 Inches MAX. 2 87 2.71 2.78 2.75 2.82 2.83 2.80 2.79 2.81 2.82 2.74 2.80 2 80 Inches MIN. 1.66 1.59 1.57 1.57 1.57 1.58 1.55 1.3 1.58 1 61 1.62 1.64 1.59 Inches Comments: Measured Thickness:, 0,625 @theta of 2*0'31 dogewith an axial position of 1.041 Limited Scan? (YIN): n '6 degjree data position aligns with 0 or W axis &Venthine Analyzed by: ,,, Date: /*;O ...... Analyzed by: "/,q/ Date: "/*,I 10/31021:04 PM Nozz 1 rotating 10131021:04~~~~~h PMNz ZoaigPg Page I of 2 f
N7 ZJ1 Z ? 6 ed I. 1IMtD 6ulleloi I- flO' ZOICIOLýV'Jd 6Z:Lý 4 Nq vi-R
~'~,t" 3~a:!a-~
3'-4a- g". i"- .9991 ea~ai13~ 3 ' aaa~~a~~a~a4. 4 ~~~ aa K O~iO aa ~.t'aa a't ~33' a-3- a#a3aa3aaaaa; ~ "'~ p
.Va~-
O 3 aaa~a?
-:4~09 me i I (a .3, a) Aaa- a-s a a 3'a a - a aa- 4 'a a-' a3' a a-3
-a a- ------ ---
,' aaa-a'A 3
3 3' ' t'- ia3/4g.3aa a3¶aa-;4j'aa ada-' ta a a. 4-jaka - a- ca--"
-' r 'C -' a-a a3a'Z7' a a<a apaaa., afaa Yaaaa a a
,4rSaba a a a-a a-3'a,.3 -4 a--
a 3
-faa' *a3 a a /cta .3 - 'ta.' 3' -- - - -
-- ' aa
---- -- r --- a- I. 3 a a a a3 a a aa- - 'a 'a-a,- a aa aa 3' a aaa ,Uaaaaa-p
'a- a -" - a-a. a '3 a33 Va a3
,-aa ta-a-a ZaaŽa aa3< 9'kat S-- ---- ---------- ------ -- ------ - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ---
- a aaaa aa a
- a, a-a' 3 " a- 3i a a-- a-- a-- a
- ------------- a S07 a-a a a a - - -a--a -a-- -
a -----a ------ a ; ...... 4
----- -a -- --- - -- a a a a a --a-- - --a ----
a a.3 a -
- 4. 97o'
------------------ - W
-tt--- - -- -
a-a------------- -939
-a -- ' -a -- -- -
- a'-- -- a-- ------------------
a aa a- -- a--
-- ajc
-- --- ýa
------- 3- a--- - - - - - -
-- a.;-- --
a-a-
~ -------
--' ---aa --
3a) -- a
$a
-- 4'--
.A
---------- -- - 1/2-a' yaaaa'a 3+/-,a' -- a--
a a- a-3'-- a a--
- a-- a-a-a--
G'9 3' a - a a.. - -- -
------------------ -a- - - - - - - -
-- a-43 -- a--- a---A 7 ---
a'-- t---a aa3 -- -- a--
- :7-7 - -- - - - -- - - - - -- - a----- - - --
--- - --- - a - -a - - a-.-
-- a---
-- a-a-- - -9's
'a --- t aa~~aa-ta I I. -"' -%8a.
- a a -- 3 a-a - --------- a a -
a
~t..
aya-aa a' p 4 a- a a a -a. ' --a I
~daa-'GIZZOa.a-aa'aa g~ a 3"(a3'a' 44p a'
.a3aa
~a a$4 a-3( W a-lat.X1/4~M~aa3'~aW~-aaa.~a-~d-fl aa-a&aaaaaWa-ra, cia.
33,'4,a.3- aa-t-a 4 3 faa'- ~aaa - .a-Ja 7*~'a-a' g a
- aaat" 3ta~pa-~aaj~a
-IIO
<-;Q)a
,alO~
-4 a~ a a
.a'9 3
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE ELA-Z. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 S~Reactor Head Penetration F;A-Ar ZMAN*P Ultrasonic Examination Data Sheet customer: WJ trC Plant: Ko*- P-)e*e,.- Unit: Penetration No.: Procedure: Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " q 2 z//o 16 Channel P/R N/A 1A ACCUSONEXI Data Acquisition Software: Version 6.2.5 ACCUSONEX mData Analysis Software: Version3 3.1B Cable Length: so' Type: 2e.- t--q # Intermediate Connectors: I Calibration Block: (,,o//q306o1 Calibration Setup: 4Scan File No.:. Initial Calibration File: /ZZc," .L.z6.q
.'3L q4zz.cV? 09. DO.q8 Final Calibration File: C,,-jU %A't,,M .
Scan Start: Z = r-O.- Scan Start:0= -5 Scan Stop: Z= 43 Scan Stop: 0 ='*3., Index Increment: 30 Channel Angle Serial No. Comments I 5-J. o50420c/14 Results: No Recordable Indications Leak Path Detected Axial Flaws Detecte Circumferential Flaws Detected Comments: Analyzed 15y: :_Level: Date: / H!z [Reviewed b : *_.. Level: 2 Date: a/D/- TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
7 P,A4,5'T A CRDM Nozzle Ultrannk Eyminafinn fl2t2 hacf Customer: Nuclear Management Cor poration Plant: Point Beach Unit: 1 Nozzle: I Procedure: 54-ISI-100-09 Nozzle Dimensions: (ph.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (del.): 0 End of Noz, (in.): 0.26 Probe Serial No.'s: Ch i S0420CN Ch 6 n/a CirX. Scan
,t Start:l__ de -0.7 " Stop:I 4.3 Ideg I -385' Setup:[.3 Ch4 n/a Ch9 n/a Files: A2267_08.00.48 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adiusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) . (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I OD 0.37 1.4 2080 1.9 209.0 0.46 208.0 209.0 0.03 0.46 4 0.25 0.54 AXIAL 1.9 2.7 2 OD 052 1.6 80.0 1.8 820 0.18 80.0 82.0 0.07 -0.19 21 0.10 - 0.54 AXIAL 1.8 2.6 3 OD 051 2.3 1040 1.6 1050 0.70 104.0 105.0 0.03 0.70 3 0.12 0.17 AXIAL 1.8 2.6 4 OD 0.43 1.4 144.0 1.8 144.0 0.39 144.0 144.0 0.00 0.39 0 0.19 0.49 AXIAL 1.8 2.7 5 OD 0.55 1.6 166.0 1.8 166.0 0.23 166.0 166.0 0.00 0.23 0 0.08 0.33 AXIAL 1.9 2_6 6 OD 0.53 1.3 188.0 1.8 1880 0.52 188.0 188.0 0.00 0.52 0 0.10 0.19 AXIAL 1.9 2.7 7 OD 0.55 1.7 2880 1 1.8 - 2880 0.10 288.0 288.0 0.00 0.10 0 0.08 0.76- AXIAL 1.8 2.8 8 OD 045 1.7 3350 2.7 335.0 0.98 335.0 335.0 0.00 0.98 0 C.18 0.18 AXIAL 1.9 2.8 9 OD 0.58 2.5 229.0 1.5 231.0 1.00 229.0 231.0 0.07 1.00 4 0.05 0.05 AXIAL 10 1.9 2.8_
11 ____ ____ ___ 12 13 14 15 16 17 Data Loc. 0 30 .60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 Inches MAX. 2.85 2.83 2.82 2.79 2.78 2.80 2.86 2 87 2.88 283 2.82 2 86 2.85 Inches
,MIN. 1.80 1.72 1.72 1.75 1.74 1.75 1.80 1.80 1.82 1.84 1.87 1.90 1.80 Inches Comments: Measured Thickness: 0.628 @theta of 233 deg with an axial position of 1.11 Limited Scan? (YIN): y 074=1103 Indication at root of weld. Depth from ID0 587" Z extent 2.26" to 3.03" theta extent 12 to 28 deg center location z=2.79" theta=22 deg 0 degree data position aligns with 0 or W axis Limitation - No leak path call. Required distance above weld 2.0" (paragraph 6 3) Distance above weld is 1 61".
No Limitation - Area of Interest above weld for crack detection is 1.0" (paragraph 6.2 of procedure). Analyzed by: Ij /I Date: L/2A- Analyzed by: /V/,9- Date: A$'9 9/24/024:24 PM Nozz 1 Page I of 2
Z Jo Z e6ed I. WJ40Q I. ZZON ZO/1lI6V'Jd £tZ:t7 LcIt't uol;lewewep IA!quMoO I I!qdn,,,,,, S,1 LL_____ L;"--- -- 44,4z '- 2 . . . /
.1. 1-I-
454.-,. -- ---- 4 4.
.44444 .,4' 1'*' ---- - -- -- - --
- 4 44 l i i I i
-- --. -- --- ---- ---- -s--
L " -ý
-- --7 --------
--- 1 --- 7 -- 4 07 oT I------------------ ------------------
I f-g. f ...................
- O' f ................... - 9'P7
------------------ C")
- . . . .. . . . . . . . . . . . . . . ------------------ - o0 0
"-----------"... ... -- - --- -- I--
-gu F-'" " -----.....-- ------------------
"- 0"9
-- - - l. . . . .. . . .. ... .
------------------ --- =1
- *4
.1-. . . . . . . . . ------- -- --- ---- 44
- '6 '1
.. .. 4--.. .. .. .. -- -- ' -- - - U9----- 9.9 7, --.
- -- -- - $45
,.4
't8A,9 VW-Z -4. dNV3nO+/-*4VthJ
o 4 A PRAMATOM E ANP CRDM Nozzle Ultrasonic Examination Dlata 5nhpaf Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: I Procedure: 54-ISI-100-09 Nozzle Dimensions: (1*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch I S0379CN Ch 8 Axi alS?. n/a IA,.;Stohl "t . * *.deg . ? - k Ch2n/ Axia$~.StbgL; 1,4 .Setupl;~ Ch n/a 4 .. ____.. Ch7na Circ. Scan Start:[1 -deg .ah 3 nla Chn
@1 -0.7 1 Stop:1 365 Ideg @1 31' Setup:1 3 Ch4 n/a Ch9 n/a Files: A2269 19.09 461A2267 08.00.04 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted CIrc. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (dog.) (in.) (dog.) (deg.) (in.) (in.) (dog.) (in.) Ratio Orientation Min Max 1 OD 0.56 1.7 00 2.1 00 0.40 0.0 0.0 0.00 IT 0.40 0 0.06 0.16 AXIAL 2 OD 0.55 1.8 21.0 2.9 21.0 1.10 21.0 1.6 3.1 21.0 0.00 1.10 0 0.08 0.07 AXIAL 1.6 3.1 3 OD 0.51 18 750 2.5 750 0.69 75.0 75.0 0.00 0.69 0 0.12 0.17 AXIAL 1.6 2.9 4 OD 0.59 1.8 88.0 26 88.0 0.81 88.0 88.0 0.00 0.81 0 0.04 0.04 AXIAL 1.6 3.0 5 OD 0.51 1.8 1330 2.7 1330 0.90 133.0 133.0 0.00 0.90 0 0.12 0.13 AXIAL 1.6 30 6 OD 0.48 1.8 150.0 28 1500 1.00 150.0 150.0 0.00 1.00 0 0.15 0.15 AXIAL 1.6 3.1 7 OD 044 1.8 234 0 1, 2.5 234.0 0.70 234.0 234.0 0.00 0.70 0 0.19 0.26 AXIAL 1.6 2.9 8 OD 0.46 1.8 255.0 2.5 2550 0.70 255.0 255.0 0.00 0.70 0 0.17 0.24 AXIAL 1.6 2.9 9 OD 0.52 1.8 2750 2.4 275.0 0.56 275.0 275.0 0.00 0.56 0 0.11 0.19 AXIAL 1.6 3.0 10 OD 0.32 1.6 2920 2.5 292.0 0.89 292.0 292.0 0.00 0.89 0 0.31 0.34 AXIAL 1.6 3.0 11 OD 047 1.7 316.0 2.3 3160 0.63 316.0 316.0 0.00 0.63 0 0.16 0.25 AXIAL 1.6 2.8 12 OD 0.47 1.8 3370 2.5 337.0 0.74 337.0 337.0 0.00 0.74 0 0.16 0.21 AXIAL 1.6 3.0 13 14 15 16------
17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz.Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 3.01 305 320 3.20 3.10 3.05 3.11 301 320 330 3.10 3.05 305 Inches MIN. 1.51 1.56 1.56 1.56 1.56 1.51 1.56 1.51 1.66 1.56 1.56 1.51 1.56 Inches Comments: Measured Thickness: 0.625 @ theta of 65 dog with an axial position of 0.931 Limited Scan? (YIN): y am.-'*=* ,,*m All flaws dimensionalý intersect with the wetted surface of the weld filet LImitation - No leak path call. Required distance above weld 2.0" (paragraph 6.3) Distance above weld is 161'. No Lim itatlon - Area of interest above weld for crack detection is 1.0" (paragraph 6.2 of procedure). Analyzed by: - Date: - Analyzed by: Date: 1v 9/29/0210.48 AM Nozz I FINAL Page 1 of 2 c~c~ed b
Plprti Z1 Zeieed 1.12840 1IVNIdI J.flOf EOI6ZI6V'V 817:%. L-PUW ZON- 9L --- 9L--t U
- UL-- LLý-OL-- -- G- 9-t-9-V- 'S- i z
99
' t I
,.~a
,.',O'
~ a a"
- a. a0/
mi
* - )2. Oa,aja.aI
-t a pa' laiaa 'at'" - a- a' ' aa aaa
- . ,' a,, a,a ,&,
- ------- a-.- -- a a pa I.' 'a aa. '-.
aa a.) 'a.aa'a
,.. a aaaa'a4Uaaa4aaa a-,.) aaaxara 'ta"; -
-7,4. -
a 4. ,a,aa ya
------------ ----- ------- .9. I 4 a Ca; I. I
----------------- , a.77 a' A - 'a- ,a---
lit:; at--a: 97;
-- '-a ----- -' -- -- -- -------------------
'a' K --- 'a, a-V-- a ----
a -- ----- ---- ---- -- a a aSP' --. a--- -
----- -- -- -- - 4-------
-- ---- -- -- -- - a . --(a-- --
--a. -- - -- - alat.--- --
---- aa-a.---y--- -------------------
-STC laaa-,a----.a- a
-- - - --- -OaT
-N- - - ~
a
------------------- -- aa a'--,----- a -a' G'9
- 'a.' --- . --- ---
------------------- --- aa---- --t ---. -a
-- a--- --- a
-- - a--- ---.
A- ---------------- a -- - - - -- - - - a'... a- -, - -- -OL a a
-- a----- --- a ;Aa ---- %N t
----- s--
a t~ Ia
--------- a --
t
------------- I----- It ---
- -- -- - - - - .. ataay-a Aa-.--- -a-2 aa, .axaal k-a-tc aaa--a---,taaf a 4 --
f---------- ----------------- a a, - - - - - - - - a-.-
--a- -- --
a - -~- - - - a- -a -- - £--
,a.,aaa.. aa.-- --------------
-6T 2'ý I I
'IdNV aY
POINT BEACH NUCLEAR PLANT LIQUID PENETRANT EXAMINATION RECORD Component ID: Component
Description:
Site / Proj'-ict: Page I of 3 RPV CRDMfNozzleNgumber I I Sheet Number or Work Order Number. 4S10003 PBNPlI R27 ISO Number: NDE Procedure Number / Revision: I Surface Condition N/A NDE-451 Rev. 20 TCN2002-0539 E AS-Welded []Ground E3 Machined Cl Other: xaminer(s) / Level / Date (Print):
.:A.JENSEN III 09-25-02 Temperature Device Manufacturer: FLUKE MT&E Number: MCDP-012 L. Location: _ W. Location:
Calibration Due Date 12-03-02 Surface Temp.: 72.4 0 F J'essel 0 Edge of Weld PENETRANT MATERIALS PRE-CLEANER PENETRANT RkMOVER Manufacturer/Brand: Ifet-L-Chek Manufacturer/Brand: Met-L-Chek DEVELOPER Manufacturer/Brand.AMet-L-Chek Type: E-59A Type: P'P-31A Manufacturer/Brand: ifet-L-Chek Type: E-59A Batch Number: 3930 Batch Number: 2654 Type: D-70 Batch Number: 3930 Drying Time: 2 mhh,. Dwell Time: 30 min. Batch Number: 4151 Drying Time: 2 mni. Dw~ell Time: 30 reIn. Indication No. L Location W Location Dwell Time: 30 mm. Upstream or Downstream - Round or Linear i Size Rernark* 1 Appx. 140 Deg. 1/4 in. N/I Linear 5/64 Indicatlon is light.Appx. 1 1/4 in. from bottom oftube Additional Remarks: See attachedphoto and sketch. .4 , & ,YOC4 -Oo-? / gt 0 , Limitations- If None, so State: NONE Examiner(s) / Level / Date (Signature): Revieyer I Level / Date: ( Oq-* 4 tt, ANII Review / Date: El N/A
/
/ 02 _Z _6_
i Form NDE 450.1 Revision 13 08/,15/01
QL 4w
.I View From Below 4' 5%
Indication #1 appx. this location 2700 (Stud 37)
1.. FRAMATOME-ANP RemoteUltrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-I, 54-PQ-i 00-2,.3, 4 and 5I A"Reactor Head Penetration tPRAM ,TaC ANP Ultrasonic Examination Data Sheet Customer: N,.Ma [Plant: B,*k, Unit: Penetration No.: 7- Procedure: 5- ISi- tO-"*'* Equipment: Description VH# Cal. Due Date SN# p.Tomoscan ' "1//o3 =.Z;q 16 Channel P/R N/A 1A ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3 3.25 Cable Length: Sol Type: !e'-i-4-q # Intermediate Connectors: 1 Calibration Block: o//q.o-/ Calibration Setup:
"Scan File No.: Initial Calibration File: Zt,-'. "2.09 A z7Z4-.7- 5".zZl-. Final Calibration File: cow 2 ., juep p -A Scan Start: Z - -.. Scan Start: 6 = -" Scan Stop: Z = (...- Scan Stop: 0 =3G"5 Index Increment: 3 ° Channel Angle Serial No. Comments
/ 5"o'1.. So 3Gl cN Results: JC-No Recordable ndication Leak Path Detected Axial Flaws Detected- Circumferential Flaws Detected Comments:
Anal ed bY: ,,_ evel: *Date: /,. 0. Reviewed by: i2~ QLevel: Z Date: /2~ TYPICAL DATA SHEET FIGURE 5 fýC(\4A 1l1 Page 31 of 32
A RAMATtA F N: CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 2 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iA.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg[.): 140 End of Noz. (in.): 0.58 Probe Serial No.'s: Ch I S0381CN Ch 6 nla a n , t , , , Idea :I Setup1, e-op.- ..- Ch2 n/a Ch7 n/a SCh3 n/a Ch8 n/a Circ. Scan Start:L.5 deg @1 -0.7 1" Stop:IL 365 Ideg @1 6.78 Setup: 3 Ch4 n/a Ch9 n/a Files: A2267 17.53.20 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 1 NRI
-2 -3 -4 -5 6
7 ; 8 9 10 11 12 13 14 15 16 5* __ _ _ _ _ _ __ _ _ _ _ _ _ __ _ _ _ _ _ __ _ __ _ _ _ D ate___ 17Data Loc. 140 170 200 230 260 290 320 350 20 50 80 110 140 Degrees ' WELD Noz. Loc. 0 30 160 90 120 1150 180 210 240 270 300 330 360 IDeglrees POLE Noz. End 0.58' 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 Inches PRFL MAX, 3.15 3 31 3 49 3 93 4.31 4.57 14.61 4.55 4.37 4.09 3.73 3.45 3.15 Inches IMIN. 1.87 1 87 1.95 2.45 2.99 3,35 13.47 3,41 3.09 2.75 2 27 1.93 1.87 Inches Comments: Measured Tickness: 0 619 @ theta of 161 _deg with an axial position of 5.19 Limited Scan? (YIN): I N Analyzed by: * *Date: ... , t,...
-,0Z.- Analyzed by: 7Dae U *
(6) 91241027:50 PM Nozz 2 page I of 2
". Nozzle 2Profli4,'.:
FRAMATOM, ANP, :- -. ' . - . -" "
*. . ... .. 1'. ..- *o'
14 5 ..---- -- , 4 ---
,--'.'..* * *. -.. - -- -----...- -. '-I. ------
4-0 2 ---------- -1 ---- 7-- -- --.-.... . . - ----- 13.50 .. ... . . . . . . . . . . . . . . . . . . . . . . . . . -- . . -. -- - --- - ---I........ . . . . . . 12.5 :- ......... . . . .. . . . . . .. 11 0.. ...........------------- -------------------. -------------------..-------------------.-------------------.--------------------. 10 .15 ..........------------- ..------------------ ..------------------..------------------..------------------. .------------------ 10.0 10.5 --------------------------------------- ------------------- -------------------------------------- 9.0 ------------------------------------- ------------------- --------------------------------------- ------------------- 8.5 -------------------------------------- ------------------- 7.0 - 6.0 -. -------------------. -------------------. -------------------. -------------------.-------------------.------------------- ------------------- 7.0 3.57 ---
--.................................. V ................................. ................................. -----------------
3 .0 . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . .. .. . . . . .. . . . -.- -.--.. 5.5 " - -
- pL3ugamwmnagMv,aPiv
-,------ ------ . ----------.I.----, *.* * -z- ------ .......... . I.. -. * .
M ~Tiiu
. 43M....
4.0 3.0 - ljj3Al~~ iiidl~ . Downhill, h.. -- 0.0 0.5
- -------- -- y ,,-----. .. . ,, , *, ,', ,* S 0.5 6l _111I .. "ý, , ý Jt,-Y -- iVt ý 2.0. '::-,'. .'..100 .:.:i* "* 15 1.. fl,, ,A,, ; -, 200. . . 250 4
*. 2.4 rNz.En -8
'- 9 .* 10 -15 - -12
,.... End
- 1 'p D -- 16
-1 -
Nozz 2 Chart I Page-2 of 2 7:50 PM9/24/02
1kc FRAMATOME-ANP NONDESTRUCTIVE FXCAMIN4AT1C3J P'Rnr* *I /3t-A-z* 7 Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-1SI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2 3, 4 and 5 A PRA-MA'r .MEAPI Reactor Head Penetration Ultrasonic Examination Data Sheet Customer: W M-C Plant: , IBe,,ýJ. Unit: Penetration No.: 3 Procedure: 5q- 15/- jOo-o"j Equipment: Description VH# Cal. Due Date SN#
. I jTomoscan "1o14q 16 Channel P/R N/A N 1,/1, ACCUSONEX v-Data Acquisition Software: Version 6.2.5 ACCUSONEX"A Data Analysis Software: Version, ".
Cable Length: - cc) Type: Ze&- i-q # Intermediate Connectors: I 4Calibration Block: "*o,,I,/3o.e; Calibration Setup: Scan File No.: A C, o'z .-..- Initial Calibration File: 4 qz0z(,. A-vZc..,,. or. c.Lis1< Final Calibration File: c,r -OIJurp, "FJL 7. Scan Start: Z = Scan Start: 0 -:5 Scan Stop: Z =6.-V8 Scan Stop: 0= *C.s Index Increment: 3' NODSRUTV EAIAMNPOCDR te Channel
/
Anqle 5"o.. Serial No.
- 5 q"*cM Comments
/
Results: I c!-e3c7ordable Indication-s Leak Path Detected Axial Flaws Detec-ea -: Circumferential Flaws Detected Comments: Analyzed by: evel: Date: /re " Reviewed by: Level: Date: / ,,. TYPICAL DATA SHEET (AA 1 O9-2 FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOM E ANIP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 3 Procedure: 54-ISI-100-09 Nozzle Dimensions: (inn ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 17 End of NozL (in.): 0.24 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a Axial Scar ' *Startl I *kLde{].',@ & lI'1'St6p' I ,Ideg :.-, .:" ,Setup: v ,: Ch2 n/a Ch7 nla {' ~ *ý j: Ch 3 n/a C / Circ. Scan Start: -5deg @1 -0 " Stop:I 365 Ideg @1 6.781' Setup: 3 Ch4 n/a Ch9 n/a Files: A226908.36.54 IA2269_08.48.15 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw 0 Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI \' 2' 3 4 5 6 7 . 8 9 10 11 12 13 14 15
'16 17Data Loc. 17 47 "" 77 107 137 167 197 227 257 287 317 347 17 Degrees WELD iNoz. Loc. 0 30 60 90 120 150 1180 210 240 270 300 330 360 Deqlrees PROFILE Noz. End 0.24 0.24 10.24 10.24 10.24 10.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Inches MAX. 3.35 3 66 14 00 14.37_ 4.39 14.27 3 97 3 62 3 29 3.10 3.00 3.19 3.36 Inches MIN. 1 98 2.37 2.92 3.27 13.31 13.17 2.83 2.27 1.92 11.71 11.73 1.73 1.98 lInches Comments: Measured Thickness: 10,618 @*theta of 1 2261 deg with an axia poitono 5.81 Limited Scan? (YIN):l n I Analyzed by: Date: ? /Zr,/4 , Analyzed by: 2 ,i Z'4 Date:
91261023:19 PM Nozz 3 Page 1 of 2
'-Ag.~~~oz a 3a 8,'I..4 a a 'aaa a
- a. FRAMAOMM ANP'., a . ' "... . aa%.,,.'.
103 1/2 . . _', .** _. ". __ '.: ' .. . . . .... .. . . .'.. ..". . .'. -- ..... .>. , . . - a-- ' - , * ., a .- - ' ,, -t .. k' * ,, , ,-.., , ,,'a .to, 14------ 14.0 a----- - - - - - - - - - --- -- - - - - - 125012 , ...------ --- -- - - - - - - - - - - - -' - - - - - - - - - - - - - - -- - - - - -- - - -' - --- - --- g22z2 'aF' 14.5 .-...... .
- -- ---.........-......... ..... : ,-'- A .
2 o ,
,4" ..... .$,.J,-af- :;.... ..*
12.5 12.0' - --- 4---------------------------- ----------------------- -~ a?.t'j 9 -. - 5*- - - ~ ~
- a - a a- a .- a - -- - - - - - - - - - - - - - - - - - - - a--
. a , a 'a a a ;
1 .5 ---------------------- .--- .--------------- .--- .--------------- .--- .------------------------------------------------------------------------ .--- .--
.055 .-.------- ------ ------ .-.----- ------------ .-.---- ------------- .-.------- - ---------- --- ---------- ---- ----------------------- ------ -- - --------- - - ---
110.5 0.0 - .------------------- .-------------------.-------------------. -------- ------------ ----------- ---- ------ -------------------- -------- ------------ --- 10.0 7.50-- ---------- -- ---------------------- :. ....................................... 6.0 5 - . ... -- - - - - - - - - - - - - - - - - - - - - --.- 65.5.0 ----------- ,. ---------------------------------------------------- 7.55 -.------------------ ----------------- ------------------ ------------------------------------ ---------------------------------------- 7.0,5 --.....- ------ *-........ 6 .5 ...
--- -- -- -- -- -- ----------------- III -- --- --- --- --- -- -- - - I[IIUI
- III.
-- - - - -- - - - ------------- .=--- -- - -- *.. ---- . . " --------------------
Downhili' 2.0 -Side,,,,
1.0 a-----
s ~ a1a ------ 4' 0 .5 '--------- a -- ----------- 0 .0- --- -- - -- - -- - -- - -- - -- - -- - - - - - - ----- - -ar 0 1z~ .' 3 - ' . -- a1 0% -'-- --------- ----- -------- -----a--. a- .. aa-- a..
.y.Zr ~~10 ~ - 150O 200.25 30 aaa&? a;?3O.
4aa ; .-'a ,a I "". . ', g' 4 a' ,A' a'QN q ' ta~a
-- 2 -3 -- 4
-6 -- 7 -- 8 10 -- 11 -- 12
. - .. 16 I~ ~'t
- 3 --
=-*14-14
-- 15
--u-unUphill / Downhill demarcation Etr-Noz. End 3:19 PM9/26/02 Nozz 3 Chart I Page 2 of 2,
L Cu£C I. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Hbad Penetrations PROCEDURE NO.: 54-fSI-lOo-0g I PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 I Reactor Head Penetration FRAUATOM* AMP Ultrasonic Examination Data Sheet Customer: N MC c Plant: - 3epe.L Unit: Penetration No.: lProcedure: 5- ISI- ,LO-') Equipment: Description VH# Cal. Due Date SN# gTomoscan " "I *'l,, "/2.0-o3zq 16 Channel P/R INA N AA ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3.5', V,, Cable Length: GOC Type: Ze.- 14-q # Intermediate Connectors: I Calibration Block: "o//q3o - Calibration Setup: Scan File No.: Initial Calibration File:A 2 6//A.."q Final Calibration File: cosinwurb r-Epommnk.4 7 Scan Start: Z - Scan Start: 0= - ° Scan Stop: Z = ,7 Scan Stop: 8= Index Increment: 30 Channel Angle Serial No. Comments Results: 00 Recordabll ndicatinn) I Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed 6y. Level: - Date: P- ;-02 Reviewed by: Level: 4L2Date: la . 7 TYPICAL DATA SHEET 6ew.2'ICJl. FIGURE 5 Page 31 of 32
S IFRAAATOME ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - Nozzle: 4 Procedure: 54-ISl-100-09 INozzle Dimensions: (irft) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.2 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a Axial SC~afmlt' i' ~'.S-t;I;Pýdg@I SIoe:~~I~g~L~;~ tupl Ch 2 n/a Ch 7 n/a F! ... '- ; , f... .:Vv- Ch3 nla Ch8 n/a Circ. Scan Start: j-5deg @ -0.7" Stop:i 365 Ideg @ 6,781' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_01.08.37 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adlusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to MIn Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I N RI _ ... ... . 3 4 5 6 7 9 10 11 12 13 14 17 Data Loc. 0 30 60 90 120 "150 180 210 1240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.20 0.20 0.20 0.20 0.20 "0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Inches MAX. 2 67 2 79 '3.29 3.71 4 05 4.27# 4.207 4.17 3 83 3 47 13 09 2.85 2.67 Inches MIN. 1 68 1.76 2.17 2.73 3.19 3.43'1 3.53 3 33 2.97 2.41 2 03 1.84 1.68 Inches Comments: Measured Thickness: 0 64 @* theta of 188 deg!with an axial position of 55 Limited Scan? (YIN): N Analyzed by: Date: -02_ Analyzed by: Date: 10 # - v 4 o0.-Zj.--l~ 9/241028:35 AM Noz 4 Page I of 2
.4"'
'4' I., 1'
' FRAMATOME AN , . - NozIe 4 Profile ' "S .\'k
'4' .;.
/5Z ( .
'.,' 4,:.:,:."* * :' ji.. . ';:,:: ."4:'"4" " . . -. - II 44 4* *'
- - -'2.2 *a '
14, 5u 14.0- -... .4 ,,..,'. , ---. 'v*:.;...;,'_. .< -,;.; ;;-*.'*. . .__ . . . . I 1 ..... .... ... . ................ 7------------ 7'7-- .................. 14.0 ... ... . - -'- ---- - -- --------------- ' - -- ----------- ----------------- ----------------- 12.5: -----------. ----------------- ----------------- 12.0' : "... ----------------- ----------------- 11.5 " - ' - - - ----------------- 11.0 -------------------------------------.., -................--............... ----------------- .................. 10.5 --------- -------- .. ..--- 10.0 ----------------- 9.0 5-----
----... . I . . .----------. . . . . I.. . . . . . . . I.--- . .. . . .. ---------------
I.,... ......... 8.5 4 -------- I-------- I-------- I-------- ------------------ 77 55 -.-.--------------- .- .----------- ---. -----------------. ---. ---------- --. -----. --------------------------- -----------------------...----- ...- 7.0 7.-- -- - - - - - - --- -- -- -- " -- - - - - - - - - - - - - - - - - - I- - -- - - - - - - - - - - - - - - - - - - - - - ---
.50
- 5. --- -- -- - --- - - --- - -- - -
5.5 1......................................................5 -"...................
.......... 14 2,5 * , == *m , ~mm = = m w = = = == = =* ' " .I.... . .. ,*- -- -,,= -- "'-- - "
Downhill 0.5 3. ;;-* . ..-* ',*:..... ...... .. * . ......... --................ ------ 4.*:-* ...
- 1.5 .
* ::.- :.'."-::.... "4.
; . -.I-.' ---------- :..... - ---. -------
4".. ....... . . . .'. ,4 "arr-
,*!-y' 1 a'
*" a.- 3 - 4-
-5 -- 6 -7 -8
-9 -10 -11 -12
,13 115 l -- 16
-Noz. End 1 ammmrnuaaUphill I Downhill demarcation 8:35 AM9/24/02 Noz 4 Chart 1 Pagb 2 of 2
0AC . FRAMATOME-ANP NONDESTRUCTIVE EXAMINATIrHN PRflC*Fnlfll=P Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration PRA4r,* a, AMP Ultrasonic Examination Data Sheet Customer: WM .C Plant: OI*a.. AJ.. Unit: Penetration No.: -4 Procedure: 5- /S/- oO-' Equipment: Description VH# Cal. Due Date SN#
.Tomoscan "-I1-4o3 1 .- c.
16 Channel P/R N/A NA1 /.A ACCUSONEX"4 Data Acquisition Software: Version 6.2.5 ACCUSONEX Data Analysis Software: Version .- 5 " Cable Length:- *0' Type: Ze,- 1u,-q # Intermediate Connectors: I
,Calibration Block: &0/19306/ . Calibration Setup:
Scan File No.: , I.'p7 Initial Calibration File: A- 2S 9._ 1
.,1' Final Calibration File: cr,,Jr M '.,"
, a() ; .34.9 Scan Start: Z = -. 7 Scan Start:'G = -° Scan Stop: Z = (,.7F; Scan Stop: 8 =.7es-° Index Increment: 31 Chann I Angle I Serial No. Comments
/ 5.0.. 5e ,a. c_ x
/
Results: o ecordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected "Itr Comments: Analzed b: ,.. ,Level: 7 Date: f-23-02.- Reviewed by: Level: -Date: /0- /. , TYPICAL DATA SHEET 40* 01.01,4, Ar/ FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOME ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 5 Procedure: 54-IS1-100-09 Nozzle Dimensions: (inr ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.34 Probe Serial No.'s: Ch i S0420CN Ch 6 nla Axial Scan .. 't e4 ) . , top: ,:. deg ,@ *: .- %LSetup: Ch 2 n/a Ch 7 n/a
~
Fjes- ~ ~~ S>-Ch3 n/a Ch 8 n/a Circ. Scan Start:I -51deg @L L-.,7"j Stop:I 365 Ideg @_ 6.78' Setup: Ch4 n/a Ch9 n/a Files: A2266_16.28.44 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI ,_ 3 4 5 6 7 10 11 12 13 14 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 1150 180 210 240 ... 270 300 330 360 Degrees PROFILE Noz. End 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 Inches WAX. 3.20 338 3.78 4.18 4.57 4.79' 4.85 4.72 4.43 40 354 327 3.20 lInches IMIN. 1.79 `1.95 2.28 2.65 30TO6 3.34 3.40 3.22 12.85 247 2.03 1.79 1.79 nhes ne Comments: Measured Tickness 0.5@ theta of 77 deg with an axial position of 1 4.51 _Limnited Scan? (YIN) N Analyze d by :
--__* /* ,* * . *D ate: _ . o __A nalyzed by :
- AD ate:
9/241028"35 AM Nozzle 5 Page 1 of 2
4 .4 .4 (4 44
- 4. 4 -4 4 444.
4.t.4 4
- IFRAMATOME ANP - ', - .4 4 4,.
44
-I - -
4,4 4
v' 4-4
.4 S 145.0 - " "'4-... .'.. <~.. .4' ' ...
4..". .. . ... 7. 4 4 4,4., 14.5 .. . . . . . -.. ............ 13.'-":- 47-- --- 13.0 -----------
,. S_.:..-.'.:..::'.!
1 2.0 . . . . . . .. . . . .. . . . . . . . . . .. ... . . . ----------- 12.5 -- - -- - - -- 12.0 11I5 - ~.~ - - - - -I , 4 -------------- . 4. . . 4.. . 4 - '. 11.0 - - ........... ...... S.................. .................. 10.5" ........ -L ------- ---------------- ---------------- ................. ----------------- i..... I - - --
- 4 10.0 --------- ---------------- ---------------- .................
9.5 9.0 ---- 8.5 ........ --------- ---------------- ----------------- 8.0 ........ .......... ................. ................. ------------------ 7.5 ........ --------- ----------------- ---------------- 7.0 ........ ---------- ------------- ----------------- 6.5 ........ 6.0 ........ ----------------- ----------------- ----------------- ----------------- ----------------- ----------------- 5.5 ------- ----------- ----------------- .................. .................. .................. .................. ----------------- 5.0 -- ----- ----- ------------------ 4.5 k A
--------- __ I ------------------ I .uuea.u A miuitnuumuunaauus A nnfueegffcnnasuu I, 4.0 unauvnuuui iuijwtflNAEfmguTje4 in.inw1 usuuuainun
- 2 ': 44,,
3.5 5 ,S 4 ?& 3.0 ---- - -- ---- - 44p4 (f*4\4)4S Downhill 2.5 ------- --4 --- -- 4, 4444
- ---:-:.- 7 -----
2.0'° --- 1.5' ----- ---- - 4- 4
- 47---
7.--- I., 1.0.5 0.25 *'7" .. . 4... . ----- ----- ---- 00,' _. 4
- p
'0 -4 . I I-
- 44 200'. 250, : 1- ; 300,:O.':>
* ,.4 _
- S,4.44 "~ " '4 ' -' ?' '" " . . . *,**,, t" - 4",* .4 tJ 4 74
--. 3
-7 ji-9 -11 iw. -- 13 - 15
'- Uphill / Downhill demarcation
.- Noz. End I 8:35 AM9/24/02 Nozzle 5 Chart I Page 2 of 2
??
ki -' FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Hfead Penetrations *P O PQ-100-1, ROCEDURE
* ' PQ NO.: NO.: 54-ISI-1 54-PQ-100-2, 00-095 3, 4 and A Reactor Head Penetration RA*4 - ItZ AMP Ultrasonic Examination Data Sheet Customer: Nimc Plant: Po,,*,A 4 BeA Unit: I Penetration No.: C. Procedure: 4.'£ I5/- /AO-0f Equipment:
Description VH# Cal. Due Date SN# pTomoscan 11 ,2- /-7o o37 16 Channel P/R t/A PI/4 I/,1 ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 350 & Cable Length: 501 Type: # Intermediate I-U.. Connectors: I Calibration Block: &o// 3vE/ Calibration Setup: Scan File No.: Initial Calibration File: A 7 =t,... ,o. - Z/ . 0 A 'ZZt,*...- /0' Final Calibration File: -, ./,6C3I7 Scan Start: Z-- O,,1 Scan Start: e = -5 Scan Stop: Z = II. Sl. Scan Stop: 0 =3o5' Index Increment: 30 Channel Angle Serial No. Comments 1 6' .30
*- 30,"t. -3 "5 o Z. "roF:D Z3 . &O3s 355oZo
&,*s 1" '_,'3 6 0 -z Results: o Recordable Indications-' Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected RComments.:
-Reviewed by: * ,.,_ j a .,. Level:- -'L_ Date: /6/;2 lo __ TYPICAL DATA SHEET FIGURE 5 q~ 1j 6523U Pace 31 of 32
IAN r- Z MKdA~rC1KAE = t WP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - _ Nozzle: 6 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.t ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 243 End of Noz. (in.): 3.72 Probe Serial No.s: Ch 1 35044 Ch 6 35052 tdeg,,, I - Ch2 35202 Ch7 n/a
*, " .. .- Ch3 35070 Ch8 nla Circ. Scan Start: I -51deg @I 0.47 I" Stop: 365 Ideg @[ 11.82w' Setup: I Chh4 35044 Ch9 n/a Files: A2265_10.15.41 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI "__'
3 4 6 7 8 9 10 11 12 13 14 15 16 17
' Data Loc. 243 273 303 333 3 "33 63 93 123 153 183 213 243 Degrees WELD Noz, Loc. 0 30 "60 90 120 150 180 210 1240 270 300, 330 360 lDeglrees PROFILE Noz. End 3.72 3.72 13.72 3.72 3.72 3.72 3.72 3.72 3.72 3.7'2 3.72 3.72 3.72 Inches MAAX. 6.72 6.76 17.00 7.31 7.42 7.76 7.78 7.69 7.47 ,7.20 7.00 6.76 6 68 Inches MIN. 5.11 5.18 15 43 5.77 6.13 6.40 6.56 6 36 6.18 15.77 5 41 15.22 5 09 Inches Comments: Measured Thckness:j 0 63 @ theta of 212, deg with an axial position of 8.131 Limited Scan? (YIN): N Analyzed by: -'/ ._Date*: /Z/o1.i - Anlye by:A"/p Date:
/ 00 1- ta-si.
Nozzle 6 Page 1 of 2 912210212.01 PM
ZO 10Z9e I 1JE8o 9 e1ZZON g0I72V/61d MU0:;. uoileoJew-p II0qu1o /llqd l I. ,,- -. 6"-' L OL-
-- 9 \ 00 :- .fM... 10
'4
* , -q
",," " ..... ...... ..---...... ..... ..... ....- ...... ..... .l .....
...- A -- - - -- ---- --. ......
- - -- .....----.. ... ... ....-- ---- -------- .. ..------- --.. 7-------- . .. --
S..
. . .. . . . . .. . . .-I-.. . . . . . . .. . . . . ..-I. . . . . . . . . . . . .. . . .- . . ..-.. . . . . . . .. . . . g C
* ..--..
- 3,,,. ,.. * . * . .-. . . .--...
. . ./ r-..
.. . . . . . ~~~~~~~~~~~~~~~~~~~-
.. . . * .- -.- t.--, . --
r .* .-- ..-. .--
- ') .,* .. * . ..o
. . ...-. o
,. * *-*.,4 . 4 O--T-o' CD to
.,.--------.. , .. . . --- . ..-- . -- . .-- . - O's
.- * *',:,X * ,-,;'**! i *,' ....-
,,- ---------?.,,'------ ----------- ......... 0*---...9..........-".....'
'4 * **o . , * ,;, . , *- ,- ,*- - -*--!--'
- - - -- --- 0.-- - - - - - ----.. , ' 0". - -,-- - - - -- G, *9 *'
4.-, ,taA
-... '... .... . . . .g s~~~wo,~ oLm ;-;--; -----------l---- ---------- . . -..----- . ..-
--------..- - ----.. --.. --.. g
"----;----------" :'* ;* ' '"*,;* "'i *".";.'. '"",:'7"- *' ' *'r*":; O*'L-",*"
0i
(. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1k .Reactor Head Penetration P*AU ATOM AMP Ultrasonic Examination Data Sheet Customer: N.MC Plant: o,,. , B o .A Unit: Penetration No.: " Procedure: 6-g- is/.-./00, 4 Equipment: Description VH# Cal. Due Date SN#
.Tomoscan , "/-7o ,o3I 16 Channel P/R ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.--5-".,. ";r Cable Length: 560 Type: Rc.-r1-4 # Intermediate Connectors: I Calibration Block: IniialCalbrCalibration Setup:
tcan File No.: ,q . Initial Calibration File: i 2.. 2/ Final Calibration File: SA e = M.37 Scan Start: Z= .I7 Scan Start: 6= -r' Scan Stop: Z= Io' Scan Stop: 8 = Index Increment: 30 Channel Angle Serial No. Comments
.3o"lj 3 zo 7.. 1D 3- 0.0,c 35040 d5" *,ofe 3 6 o fi Z Results: NoRecordable Indications- Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: Date: f- '-2-0-2 Reviewed by: / Level: Date: O. L v l I /' T""/"YPICAL DATA SHEET 7 FIGURE 5 Page 31 of 32
0 A F::R AIAATO M I ANI: - ... *.. LJL 'IIL customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Procedure: 54-ISI-100-09 Nozzle: 7 INozzle Dimensions: (im) ID: 2.750 OD: 4.000 Thickness: Downhill Side of Nozzle (deg-.): 0.625 258 End of Noz. (in.): 3.58 Probe Serial No.'s: Ch i 35044 Ch 6 35052
...... ,,Scan.,L.
... , St*tIrA,4*t d . Idg kAxial Ch 2 35202 Ch.7 n/a M .,, . , Ch3 35070 Ch8 Circ. Scan Start:L 0.47deg@ [j" Stop:I n/a 19 Ideg @1 365' Setup: I Ch4 35044 Ch9 Files: A2265-19.14.49 n/a Cal Block SIN: 60119300 Ch5 35052 Ch 10 Depth End Point I n/a End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Flaw Surface Weld Location to Min Min Max Max Total Min Max Total Length No. (ID/OD) Flaw Tip Angle TWD Aspect Flaw @ Flaw (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Mn Max 1
2 NRI
- 4 7
-9 10 12 13 14 16 17 Data Loc. 258 288 318 348 18 48 78 108 138 168 198 228 258 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 MAX. 651 6.55 6.79 3.58 Inches 6 98 7.64 7.59 7.59 7.54 7.40 7.17 6.84 6.60 6.51 MIN. 5'00 509 537 5.56 6.27 6.32 627 Inches 6.27 5.94 5.66 5.37 5.19 5.00 Inches Comments: Measured Thickness: 063 @ theta of 185 d*g with an axial position of 102 Limited Scan? (YIN): N Analyzed by: Date: 91 - - C,- Analyzed by: Date:
91231029 31 AM Nozzle 7 Pa~e I of 2
0-.
""14.5 -.. . . -. . ............ ..- .
i * , ;" ... .... . :...-----...---------....- 14 .0 ----------- . .. 13.5
...14.0------ . .... ........ . . ;....-.;.
13.5 ----------- - - - - - .. .... , " , " " ", . 13.....0 ....... --------------
~~
12.0 ~ ... . ...... .............................. 12.5 ---
. .- . . - 1' , , ""' , ""I p71" 11.5 .. . . .. . . . -- "- ':--- -:-------"
1 1.00 " -.- -.- 11.0--------.-.- . . . . .. . . . ..- . .. . ..-. ..-----------------.-... . 0 7----- 50.0 .................. ................. ................. .................. .................. 3.5 ......... 7.0 -.. :12- 1 - ................- 605 5.0 *'**:* ' " ---------- 4 .0 ------------ -- -" - 3 .5-
*. wo*/ -- o- - -- - 1 --- ------------------
3 ----- ---- - --- 14 ----------- 9:31 AM9/23/02 N ozz le 7 C h a rt 1 , ( fý-03 P ag e 2 o f 2
FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION P*mnntto* Remote Ultrasonic Examination Of Reactor Head Penetrations 9 . / I I PROCEDURE NO.: 54-fSI-100-0g PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5
. Reactor Head Penetration FRAMAMME AtNP Ultrasonic Examination Data Sheet Customer: NMC Plant: Po,,,'/ B2lA, -. Unit:
Penetration No.: g" Procedure: " -Is/-/*-/ -of Equipment: Description VH# Cal. Due Date SN# 4Tomoscan 12/7o. 7o3i , 16 Channel P/R 0 ,A t,/, ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3,T& '3.1 Cable Length: 5 o0 Type: RG.- PA # Intermediate Connectors:
*Caflbration Block: 3o//D301E/ Calibration Setup:
Scan File No.: Initial Calibration File: AZ'.cz /0'v.zf'.3 A zzG4,- iSo-. -0 Final Calibration File: R9244- cL-. 19.37 Scan Start: Z .0-,q71 Scan Start: 6 =. S Scan Stop: Z = 17.0 Scan Stop: 0 =t, Index Increment: 30 ChannM1 Angle Serial No. Comments 3 (&0'.s -3500 Lisvz- I soq¶'I Results: - ecordable Indi Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: . evel: Date: '*,Zo .1 Reviewed by: .Level: -1 Date: 9'/2. TYPICAL DATA SHEET 1., S0 FIGURE 5 Page 31 of 32
.A- n, CRDM Nn77'iA I lltrnnip li'njinfi,,i et..
Customer:" -.. . . ~ Nuclear - Management Corporation Plant: Point Beach
~. **~.*IQ ill lLgtl % a La IULP Unit:
I 1 L Nozzle:
--- .8 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.-): 260 End of Noz. (in.): 3.56 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scajt.'.I.. tIbf- .... -"J-W Setdptlj,.I.s,.,." Ch2 35202 Ch7 n/a Fi-,-"2.. .. ,, ........ . .... ....... ;-.
-... .,Ch3 35070 Ch8 35070. n/a Circ. Scan Start: -5deg @1 0.47 " Stop:1 365 Ideg @1 17.62j' Setup:L1 Ch4 35044 Ch9 n/a Files: A2265_15.07.00 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (de g.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 2
-3 4
5 7 8 " 9 10 11 12 13 14 16 Data Loc. 260 290 320 350 20 50 80 110 140 170 200 230 260 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 Inches MAX. 662 6.63 6.84 7.00 7.73 7.68 7.71 7.62 7.37 7.13 6.93 6.74 665 Inches MIN. 5.25 5.23 5.41 5 65 6.46 6.44 6.49 6.35 6.10 585 5.56 5.25 523 Inches Comments: Measured Thickness: 063 1@ theta of 168 deg with an axial position of 8 64 Limited Scan? (Y/N): n Analyzed by:-Date: z .. ,,0 Analyzed by: A Date: Cý/ L.-, 09 o. 9/22/025:12 PM Nozzle 8 Page I of 2
SJo Za6e8d . *IEqO 8 9lZZON ZO/I2/6VWd SE:S UOI1RWaewep 1IP4uMaoo /- 114llu,, Sl, PU3 -ZON! 9k----- OL 6- 4f! LL 9-B £ .==,-= %1,
$7
,°... """;'*
S° ;*,*:
* .g.,.*/r,',, "..."
" . "O .
ee fi
. '7.. SL: .. ...
, .a "' '"". " ..... . p ' '. ....
- °;AA",'
1/4 .... n',.t i:,
- <-Q*" ;*; P, r.=*/>
-I 0 - , ,I i5, f, - O-- - -- ------------ , .OI.- -
4'7
.. , -, . ", 1 . - O'
-a-----
!IIIuMoa 44. -- "------ "-" - -'9 S-- .a a
"---- -------r .. -- . ---
. in.
no:::::::::::::: :::::::::::::::::::::::::::::::::m:::::::::::::
-- L----
~~~~~~~~~~~---------- -----------
--------- I--I-----
- I-
'I . .-. --
I" n.I
,.N OT
--4--
g O'
~
S... .............. *.............. t ............. .............. 1 ........................... O'
- . t- - -". 'm S. .-.... .... ... 1
. * + .r": ..*, ..----
I --- - - - '- --- . - - V9'. - - - - - - --- ' F fr3.- -- - -
.5 4
-I , ,- -.. -------- '----- ...- g 6 /
Li, St
.S. .W* , I *. . .*I , ' /
45
. . -- -- - -- - - -- - - J -----.. " --*'" --, -----
V
-----""7 ,--------------------- - ". ---
- I--------
---- ". * -"o I'I, I" :-- '
*4'4 "C--- --- ----- : ------ -------------- ------------------ S:,' .,,
. , . . , ------------- .* ., ; - * . '-',.,,---- ,..9.* 7.: ,. , 7. :,----,,-.--,--,- ..-.... . ,.
j-- "" " ------- ---- ----- ------- --------- e
------- , - --- ----- elg- J----,.-------,,--**
l-ZO: ------- --- .. ,., * :'-.-" ----- --- --- I,
---------- I------- 7.. ---------- ------
..--- ,.-- ,,-.-'---- ------------- --------- 41
'--I
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCm:rnrInF Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-100-09
-PQNO.: P0-100-I, 54-PQ-100-2, 3,4 and 5 A Reactor Head Penetration AMTIOM, AMP Ultrasonic Examination Rata Sheet Customer: M.MC Plant: Po,,,,# Be,,., Unit:
Penetration No.:*, Procedure: *q-/15-,/a-*o Equipment: Description VH# Cal. Due Date SN# 4Tomoscan z-/7aZ =o31: " 16 Channel P/R N/,1 ACCUSONEX "Data Acquisition Software: Version 6.2.5 ACCUSONEXM Data Analysis Software: Version 3.9 0 Cable Len th: 60 Type: IZ6 -,-"-A # Intermediate Connectors: I
,Calibration Block: "///I E Calibration Setup:
Scan File No.: 22.s- c 3-. 8 / - Initial Calibration File: 4 :-'_/. 2:.-, Final Calibration File: ;22 4 - o. 'j -.7 Scan Start: Z =" .* Y?" Scan Start:' = -J" Scan Stop: Z = 1.7/Scan Stop: 0 Index Increment: 3° Channehl An e Serial No. Comments 6' "35,DW 3111.1-1 3 - zZ . -oF D 3 e,s0 350io 5" (p , o'5 3 *o,¢ 075- 3!F02-F Results: No Recordable Indications Leak Path Detected I. Axial Flaws Detected Circumferential Flaws Detected Comments: V..AT7 AnalRed by: 9 Level: Date: - q. -"2. Reviewed by: Level: Date: Iz,. q. 67..
>7 TYPICAL DATA SHEET FIGURE 5 @)911LAlD -2 Page 31 of 32
0 A CRDM Nozzle Ultrasonic Examination Data Sheet FRAAMATOME ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 9 Procedure: 54-ISI-100-09 INozzle Dimensions: (1s.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (de9".): 130 End of Noz. (in.): 0.91 Probe Serial No.'s: Ch l 35044 Ch 6 35052
,lc . ,Sta Stop:_ '"," d .. __t_,_- Ch2 35202 Ch7 - n/a Ch3 35070 Ch8 n/a Circ. Scan Start: J-5deg @1 0.47 I" Stop:I 365 Ideg @L 11.911" Stop: Ch4 35044 Ch9 n/a Files: A226505.08.12 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI- -..
2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 Data Loc. 130 160 .190 220 250 280 310 340 10 40 70 100 130 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.91 0.91 10.91 0.91 0.91. 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 Inches MAX. 3 62 3 93 4.17 4.58 4 62 4.86 4.78 4 56 4 09 4.09 3.82 3 66 3 62 Inches MIN. 2 84 2.99 3.19 3 57 3.76 3 80 3 68 3 47 3.11 2.84 2 84 2.72 2 84 Inches Cmet:Maue Thic'kness: 10.64 1 @theta of 150 deg with an axial position of 6.7 Limited Scan? (YIN): N Analyzed by: OZ6__-= tý2 *_ Date: V,/
, - 07... Analyzed by: AJ/,,? Date:
9/221028:43 AM Nozzle 9 Page i of 2
Z1 Z 968d '200r7'/l Q I. JL-43 6 91ZZON ZOIZEI6V'JV g9.8
------------------- .................... ------------------- ....... X........... ------------------ 0L
---- : -------------- .................... ------------------- ------------------- ------------------ ------------------ 9'L
------------------- .............. ------------------- .................... ------------------ ------------------- -9*9
------------------- ------------------- I------------------- ------------------ ------------------ ------------------- 0*60
---- t- --- 4s> -----
.-......b--------------
-T6 sot I-'. 1.' . 4
---------- 7-------- I I------------
T
%9*Ttt I ,
1, _ ,
--------------7-7
........... ------ .......... I---------
7---
-O *61
-- --- ---- - - - SIG61
.......... .. 7------------ ----- .. . . .. j
-Oon
- II I I Ai.9IZZON- B ;';,~.22 > :*w YIpj~%.~ vs~6vvs
CuZC .. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEfltRF L-A1. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-1 00-09 I PQ NO.: PQ-I00-1, 54-PQ-100-2, 3, 4 and 5 I 1kReactor Head Penetration FRA-, V5,MZ AMP Ultrasonic Examination Data Sheet Customer: NMC_ Plant: J~e--l F3 Unit: Penetration No.: )0 Procedure: 5q- is,- 0j Equipment: Description VH# Cal. Due Date SN# LTomoscan ""/./o3 -2.-oz. 16 Channel P/R NA NAI -I1A ACCUSONEX'm Data Acquisition Software: Version 6'.2.5 ACCUSONEX Data Analysis Software: Version 2 7-. 8' ,, Cable Length: Got Type: Ze.- t-4-q # Intermediate Connectors: I ICalibration Block: &o/)q.30o6 Calibration Setup: Scan File No.:. " jy'?., I Initial Calibration File: 1,)26e 2./S/ Final Calibration File:c,.rAJb PRnp,,c
- 7. 7.T.'I Scan Start: Z = r-.7 Scan Start: e= -ro° Scan Stop: Z = 7.r'2 Scan Stop: 0 = 2,cr" Index Increment: 30 Channdl Angle Serial No. . Comments I 5o°* $ oS£IC(.
Results: oRcordable Indications Leak Path Detected iaT Flaws Detected Circumferential Flaws Detected Comments: Analyzedby: ,...... Level: Date: ý7,,.-o0-2-. Reviewed by: Level: -Date: 'o ". 7-
'e2ýTYPICAL DATA SHEET FIGURE 5 tA OcA' Page 31 of 32
m, A CROM Nozzle Ultrasonic Fxamin~tinn 1l*f* R~hnn MAArn KA A .d Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: -10 Procedure: 54-1SI-100-09 Nozzle Dimensions: (ha) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 37 End of Noz. (In.): 067 Probe Serial No.'s: Ch I S0381CN Ch 6 n/a Axial--' I e$ ...... ;., ,sSetutop,:,- Ch2 _ n/a Ch7 n/a
* .. ......... , *.. . .. . . . , h3 n/a Ch8 n/a Circ. Scan Start:'l deg @L-0j" Stop:I 365 lde @1 7.57j Setup: Ch4 n/a Ch9 n/a Files: A226719.31.33 Cal Block SIN: 60119300 - Ch s n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max I NRI _,
2 _, 4 6 7 10 12 13 14 16 17 Data Loc. 37 67 97 127 157 187 217 247 277 307 337 7 37 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 Inches MAX. 3 69 3 88 4.25 4 64 5.19 5.62 5.77 5.77 5.41 4.91 4.44 3.89 3 69 Inches MIN. 1.94 2.17 2.49 3.01 3.46 3.97 4.33 4.25 3.78 328 2 64 2.21 1.94 Inches Comments: Measured Thickness: 063 ( theta of 185 deg with an axial position of 2.72 Limited Scan? (YIN): N I Analyzed by: Date: Analyzed by: tIP7A Date: I 9-2 J.dL 9/25/029 05 AM Noz 10 Page 1 of 2
I ZJo Z aBed SIJe840M ZON Z0/9Z/61A'V V0:6 uoqleoaewap IllqUMoQ] / IILdRw 9L-L- L-9 £ ,,-,-
'3'
.3 . 3'44
.3 3 N
- U4 4 .3 A
- 3O- 0W.. 3333
,s ','3'"3 3' 'U o'o o'3/4 3'.'
A
*'.j* -*.o ~t. - ' *,, I - - - -- -- ----- -- -----
3-='"3
.. 4 - --- '.--
- -~i?3.'4
-, --- -(3-
- ,3--
3 .
- ---- 3/4-. r-' 4- .-
3 g'O IlUMCoO - - - - - ----------- . 3 OT
-.. . . . .:. . . . . . . . :. . .t. . . . . . . * .. . .. . . ... : . '. .
ST,
~hp. '.ammm.-.... l...... O'P,
=:-,-Z--*-- _."n........
S 4....- wt....... wpn u un un pw nmuhg;m wunn n~
..... .. ......arer g's
-4,;" S'.", """ 0"9 g99 3.- ---- ------------- --- - -
E'L "tr...3 <,3 ,.-. -,3 9's
-- - ----- -' -----.-- --- - 0'6 T6
--.--------------- "----.. I......
-- .I-,-----
,-,- .......--....-.---.- ------ ---------- /- --------- -- ---- w------ -,--. -----..... ------.---
---------------------------- :* , -- ".- -'--" ----- . ... "-* "--,------ ,W .--------- . .. ,,-,,--..
--
- g'ot
"----"----"" /,--------------.------- ------
----- -w-,----,--- O'U
-. ----- ,*, I------------------
,,--,----,*. I -------- wN -----------
, - .- 'V----------------',, *
" ---------------- ',,*.w, *
-------------- .' ; -.. °-'------------------------* .
o'kk O'Ct'
. " . * .. .---- ,'= ".
--------- . *,*...o ,'I
- w.**
" -- ... -------- :,l Wet
'sCk' 0"W
;'*kt N -
Cg 9C.. FRAMATOME.ANP f~A1iY( NONDESTRUCTIVE EXAMINATION PROCEDURE " . - Remote Ultrasonic Examination Of Reactor Head, Penetrations PROCEDURE NO.: 54-fSI-100- 9 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration FRAMATaME ANtP Ultrasonic Examination Data Sheet Customer: WM r- Plant: o #-,
, ej.-. Unit:
Penetration No.: !Procedure: 5j- IS/-,1oO--'* Equipment: Description VH# Cal. Due Date SN#
.Tomoscan *11, q "1/-/03 22 q 16 Channel P/R N/A NA '-'1A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version .3.'51y. .
Cable Length: Sot Type: k,z.-qI # Intermediate Connectors: Calibration Block: *4o/1,q3oe/7 Calibration Setup: Scan File No.:/*2f.20- .S.e */4 q Initial Calibration File:,.25%c*.,/.2. Final Calibration File: ca..rijvco *r Fot'*J r Scan Start: Z = -.. ' Scan Start: . 5 Scan Stop: Z = 1.61,"Scan Stop: e = 3W" Index Increment: 30 ChannM Angle Serial No. Comments I 0 l 5os. cJJ
/
Results: (lb-_ecordable IndicationsE3' Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: J.d Level: .17 Date: /- .o -1Reviewed by - Level: .'Date:
)TYPICAL DATA SHEET FIGURE 5 tlsý-p ojýzc-Q'z Page 31 of 32
FpAMATOME ANP CRDM Nozzle Ultrannin Fvmin2finn fl2*a kf Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 11 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in4 ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.j: 0 End of Noz. (in.): 0.59 Probe Serial No.'s: Ch 1 S0379CN Ch 6 n/a
~~d ____ ý i; C n/a C7n/a WW T- 4Ch fly/a ChB Circ. Scan Start:L -5.deg @ -0.7 Stop:[ 365 Ideg @J fl/a
" 8 161' Setup: 3 Ch4 n/a Ch9 n/a Files: A2269_01.06 25/A2269_05.24.18 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI
-3 - -----
4 6 7 4 8 _ 9 10 12 13 14 15 16 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 Inches MAX. 4.94 5.37 5.89 6 54 7.14 7.55 7.61 563 5.15 4.57 4.10 3.75 4.94 Inches MIN. 2.13 2.50 3.39 4.36 5.20 5.79 5.89 4.19 3.73 2.89 2.11 1.67 2.13 Inches Comments: Measured Thickness: 067 1 theta of 2551 deg with an axial position of 635 Limited Scan? (YIN): N Analyzed by: Date: 9. -7e- ,. Analyzed by: #j /A4 Date: - 9/26/20026:38 AM Noz 11 Page I of 2
6:12 AM9/26/2002 Noz 11 Chart 1 Page-2 of 2 CNZ. FRAMATOME-ANP NOMNDFRTRI It'ThIFI IFYA£1UllW* d DD* b'nn r I=II NONDESTRUCTIVE ;:yAAAJKA'MnK' n0ee'cr%"n= Remote Ultrasonic Examination Of Reactor Hiad Penetrations PROCEDURE NO.: 54-ISi-100-09g N I N.: PQ100-154-PC-I100-2. 3.4 *nd_/ PQ P N "A "Reactor Head Penetration FRAMAOME AUltrasonic Examination Data Sheet Customer: W4 me-. Plant: P,#-- 1 ki Unit: 5em_. Penetration No.: Procedure: 51- 15i- .oo-* EI Equipment: Description VH# Cal. Due Date SN# gTomoscan "11-/13 2ozzq 16 Channel P/R N/A N/ ACCUSONEXj Data Acquisition Software: Version 6'2.5 ACCUSONEXm Data Analysis Software: Version.3--5 .. Cable Length: O' Type: k>&- 1-4-q # Intermediate Connectors:
.Calibration Block: ",ol/1473o el Calibration Setup:
Scan File No.: ., ; 22C, 7_.-t. 22"0, y Initial Calibration File:,2,(*./f.
- 4'.,
19- -.2.4 o -y. 7.j5 Final Calibration File:cofi-,6,.itA,0 r Scan Start: Z = -,' Scan Start: 0= " Scan Stop: Z = 7.57 Scan Stop: 0 = Index Increment: 30 Channe Angle Serial No. Comments Results: -- ordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: Date: - Reviewed by : Level: Date: /O,' e*ý TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 12 Procedure: 54-ISI-100-09 jNozzle Dimensions: (ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg:): 0 End of NozL (In.): 0.51 Probe Serial No.'s: Ch i S0420CN Ch 6 n/a Axal,.Scan*,* Stit -- _:_ de_ , Stop: , Ide§g 1@.
" Setup:Ir , Ch2 Ch7 n/a Qjle. 4 AT,~ ~ i Ch3 n/a Chl8 n/a Circ. Scan Start:I -5jdeg @1 -0.7 Stop:I 365 _deg @1 _7.5I' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267 01.50.241A2267 02.23.35 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 nl/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (dog.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI 3
4 5 6 7 ; 8 10 11 12 13 14 15 16 Data Loc. 0 '30 .... 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD N oz. Loc. 0 30 60 90 120 1150 180 210 240 270 300 -330 360 Degrees PROFILE N oz. End 0.51 0.51 10.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 Inches MAX. 3.08 3 25 3 57 4.12 4 60 5.03 5.15 5.13 4.81 4 29 3.72 3 30 3 08 Inches
]MIN. 1.191 1.31 1.65 2.33 3.32 3.76 4.16 3 89 3.46 2.1 1.71 1.31 1.19 Inches Comments: Measured Thcknes's=: 0 63 @ theta of 202 dea with an axial position of 6 22 Limited Scan'? (YIN): N Analyzed by: tr= jDate:, 9-;2.r -0 2 .-- .... Analyzed by: A( A Date:
7 ~~ ( O-0 Z,%(- uz-Noz 12 Page I of 2 9/24/028.35 AM
z Jo z 968d , ieqO ZL ZON ZOlIIZ/6VV g£:8 II*.,,?.
- I
.:........ .:_.. . 2... 90"*
- ---- --- ----------- ----------- S......:...........
- I
-A. '5 O'V "5A "S`
----------------- k-. I , --------- --
----------- ..... ------------------ * - .5 . 4' ---------
----------L ------
'Vol 9O's mnseomm
'kunneumak~~~~~~~k~~Wiin~~~i unaunf ~ ..... .ii~u ...... -~ -n --wnu -e
-e~
--ui-am
-u-e-te
-n-
-- ====- ====== ====.==-=-=-
------------- z ....
-- Ii 9.'
0"9 9.9
--------------- :__ ----------------- ----------------- k-- - - - - -- - - -- - - - - --.
I-.................
---------------- ---- tv ---------- 0*L
----------------- .................. ----------------- I................. I I-.................
097 I- -.. --.. ---------.
,I................
O's I-.................
,I........... .....
Ts 4 ................. 0'6
..................t__.
--------------- ----------------- ----------------- I----------------
------------------ ------------------ i.. ................
9.'Oi,
-'-a "----/" - --- " .--- . * :/-----
"'.I :'/ , : , -' - "-0------"
I"4,. 5j55.A. A"5 4A
-A 5' --
4 , . '4 , , ','i" -I, .." ,* A-s -
'~0It
, ' . . ,. . -A ' .,--- b I, ' .:-,.rlirw.....
ts 1 : . dN *p'O..r /*-'. fl ¶- ,- '
,r .,s ,',.
"T' R'- 77QR7k YT
Cl..C FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE " . Remote Ultrasonic Examination Of Reactor Hiad Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ -100-*i, 54-PQ-100-2,-3, 4 and 5
! t 1Reactor Head Penetration FR'AATO"MEAMP Ultrasonic Examination Data Sheet Customer: WMWC. Plant: c,-- !3e.c- Unit:
Penetration No.: 19 Procedure: 5q- IS- .o0"D'i Equipment: Description VH# Cal. Due Date SN# tTomoscan " ""/L/cI z-zZq 16 Channel P/R N/A N A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX" Data Analysis Software: Version q93 . Cable Length: go I Type: Ze.- t-- # Intermediate Connectors:
.Palibration Block: &,o/j93o06 Calibration Setup:
Scan File No.: At22.-.?3, Initial Calibration File: i9 24_irK29.9 5/ 4 Z627.67 oo. -3." Final Calibration File:CoA 0 r~yuco prxre"A*,'u Scan Start: Z - .7 "Scan Start: 6= -- " Scan Stop: Z = .777Scan Stop: 6e= j Index Increment: 30 Channel Angle Serial No. Comments Results: lecordable Indications Leak Path Detected Axial Flaws D--ecleo Circumferential Flaws Detected Comments: Analyzed by:) Level: V f Date: /0-2_7-0-* Reviewed by: , Level: .'-Date: /'/°-
/TYPICAL DATA SHEET 60 ,-,
FIGURE 5 (c Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 13 Procedure: 54-ISI-100-09 Nozzle Dimensions: (Ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 23 End of Noz. (in.): 0.2 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a A'tial , , .. S , Ie@.. I St I- ;"StP - Ch2 nla Ch7 n/a Circ. Scan Start:[ -5deg @ -0.7 " Stop:
~t ~ ~ ~-Ch 3 n/a Ch8 n/a 365 Ideg @1 7.781' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_00.03.01/A2267_00.39.15 Cal Block SIN: 60119300 ChS n/a ChIO n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI .....
2
- 3 4
6 7 , 8 10 12 13 14 16 Anlye _ _: -T _ _1 _ __- 17 Data Loc. 23 53 83 113 143 173 203 233 263 293 323 353 23 Degrees WELD Noz. Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.20 0.20 10.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Inches MAX. 3.11 3.37 13.73 4 29 4.87 5.13 5.19 5.09 4.77 4.27 3.77 3 33 3.11 Inches MIN. 1.46 1.71 1 227 12.85 3.55 3.95 14.21 4.03 13 47 2.63 1.86 1.54 1.46 lInches
;Comments: Measured Tickness:1 0 64 1 theta of 23.66 deil with an axial position of 14.311 Limited Scan? (Y/N):1 N I l zne A y v , , ,.k
- _ý'* . Da te : 1 - Z I9* - o ? - . ...Ana ly z e d b y : */ D a te :
/ ULsAV 0 .91. Z.o 1M 9/24/028:35 AM Noz 13 Parge I of 2
' F~RAM TMI ANF3, N -- 1- 13 P-'1.
*. 15.0 -' :-" ": - -- -- - - - -- . ... -
... 4%C .
- ---- *1*
13.5. --------- 1' 13.0 -- ----------- "1 12.5 --- - - -- - - - -- - ----------------- ----------------- ----------- "---------7 - -- - - -- -
, .4.
--------- .................. --- - -- - r- -- -
I .. . . .. . . . .. . . ----------------- ----------------- ------ - --- ---- -- -' - - - - - - - 11.0 -- - - -- - - - -- - - -- - ----------------- ----------------- ----------------- - -- -Ž . - V. .,P. 10.0 ---- -- - - -I--- --- - - 9.5 4------------- I------------- I----------------- I--------- --------- ii- --- - -- - 9.0 ----------------- ---------------- ----------------- 8.5 ----------------- ---------------- ----------------- ----------------- 8.0 ----------------- ---------------- ------------------ ----------------- 7.5 ----------------- ---------------- ------- . ......... 7.0 ----------------- ------------ ---------------- 6.5 ----------------- ---------------- ---7------------ ---------------- ----------------- 6.0 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- -----------------
- if--
5.5 ----------------- ----------------- ----------------- ---------------- ----------------- ----------------- ----------------- - -- 5.0 ----------------- ---------------- ------------------ ------------------ 4.5 -------- i--------- ----------------- ----------------- ----- - - - - -1 -- 4.0 to-M n-inaMaurt!4 -- ------------m~~~w i4" UmmIiua um 6 3.5 ----------- 3.0 ... - ...
--------------- ---------------- Dbo.nhfll
.2.5, -- -- - -- - --
---------------- -------I----- 7- . .4
.2.0. --------- --
1.5 -. ----------------- --------- I** (.1 V . 0.0'- '1 ')47 2I , , I I , , ,, ý;' 15 0 2 00 2 .5
-2 -3 -4
-6 -7 -8 10 - 11 -- 12
. - ---- 14 -15 --- 16 mn5wUphill I Downhill demarcation 8:35 AM9/24/02NolhatPge2f2 Noz 13 Chart 1 Page 2 of 2
* -. . *V, CiC I--
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head'Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Pt Reactor Head Penetration FRAMA*aMI A Ultrasonic Examination Data Sheet Customer: M )C, Plant: i,_.- B,- Unit: Penetration No.: 1N Procedure: 5q- Is/I- jO- 011" Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " ",/7/o. 16 Channel P/R N /A N 1A A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX M Data Analysis Software: Version 3-'ý2 s.5, Cable Length: IO' Type: 2&- -4q # Intermediate Connectors: I
.Calibration Block: &oio//q3oi Calibration Setup:
Scan File No.:. A Zzc,- o,,- ..- Initial Calibration File: A
-. *o.0Z2 I Final Calibration File: A16u: , 7.3 Scan Start: Z = q0"Scan Start: 0 = -* Scan Stop: Z = '7-41" Scan Stop: 0 =L,"
Index Increment: 30 iki ChanneI Angle I Serial No. I 501j. 15*oIZo C.M Comments
/
Results: (11-o Recordable Indications) Leak Path Detected Axial Faws etected Circumferential Flaws Detected Comments: Analyzed bY: Level: Date: qs't'f2
-Reviewed by: , . Level: -7*
Date: l- o.;z_ TYPICAL DATA SHEET FIGURE 5 Pace 31 of 32
PRAMAT(3tI" ANM CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - Nozzle: 14 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iia) ID: 2.750 OD: 4.000 Thickness: 0.625 Ch2 /3h l Downhill Side of Nozzle (deg.): 96 End of Noz. (in.): l- , "*" p Pd 0.26 l** '
*; "",,.-,,- *Y* S Probe 1". tu l Serial
"' .0,,*
No.'s: Ch I S0420CN Ch 6 n/a ItI M't~-- l ;g"*t
, S. ,*'n. .*N:'?,.-*, I F11 _____ d_____
"~ - ________ q,,,~i Ch2 n/a Ch7 n/a Fils ~ % ~,~4~f ~ ~~ : /£ 'Ih n/a ChB n/a Circ. Scan Start:I -51deg @1-0.7_ " Stop:I 365 Ideg @1 7.9f' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_09 59.52, _11.05.05,11.10.59, _11.42.02 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to MIn Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI _____
3 4 5 6 ; 7 8 9 10 11 12 13 14 is 16 6 36 66 96 Degrees 216 246 276 306 336 330 360 Deglrees 96 126 156 60 86 190 120 150 180 210 240 270 3-00 1WELD Data Noz. Loc. 0 30 0.26 0.26 0.26 TInches 0.26 0.26 0.26 0.26 10 .26 0 .26 0.26 0.26 3 22 Inches PROFILE Noz. End 0.26 0.26 5 42 5.00 4.38 3.78 3'43 3.82 A4.43 5.10 5 61 5 66 1.71 Inches MAX. 3.22 3.38 4.33 3.73 2.76 2.27 1.99 2.39 3 00 3.75 4.50 4.70 Limited Scan? (YIN): n MIN. 1.71 1.83 120 ,de gl with an axial position of 4.32 , Measured Thickness: 0 ,6 - t h* taof Comments: W/ ' Date: Date: 9 12 7 g
-/', Analyzed by:
Analyzed by: -L 7'j (. 9/24/022:37 PM Nozz 14 Page 1 of 2
Z1 Zo9e68d -" LýI1E4OI7LZZON ?QIV7ZI6V'I zc:z 00t
- S.D.
- 79
-----W UUMIUV WWN 11UU.11 1, UW nuuwwnMri.iMrmuusmm n 1d~n~mnunn ~ gfiuuuauu amnuanwnu
*----------------------- ----------------- I 0 *9
-- ------ I-------- -{ ----
----------------- ----------------- ----------------- ---------------- ---------------- 0*
9
--- -- ---s';
- - - (4
------------------ ------------ ----------------- ---------------- ---------------- *G96 ok O*
-- - -- 4-- --------------- ý,,
----------------- ----------------- ---------------- ---------------- 0',.--- - --
----- -- 4
-- - - --- - OW 4-- --. -
- z. r---- -
- -- ,- -- xx94t
------------------ ----------------- -----------------: ---------- ......
- 4;;'*-
--- - -Po~z.
-:nt
---------------- --t -----7-- 4--- ----7 ---
--7 II
- .9*C
---------- -- 1/4-
-,------------- ~~--' NV I
SWQIVINWtdW 0
'I,
*?~Y!¶V?ý'
2-i
.--. ,.jI; ZMVZ {: rN' .4
- 24
* - - I A
FRAMATOME-ANP NONDESTRUCTfViF IYAM!MA*Twtl nr1*tr=*r* Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09
, P0 NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 A Reactor Head Penetration zA*,A*t A*=P Ultrasonic Examination Data Sheet Customer: W MrC. , Plant: p.,-/-- Iec.* Unit:
Penetration No.: -Z-4 A5 Procedure: 5q- 15/- ioO"-6e Equipment: Description VH# Cal. Due Date SN#
.Tomoscan " 1,/'/o. 2..ozq 16 Channel P/R N/A NAI, ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version3-4 -s.5 Cable Length: SCO Type: Ze.- 1-4-q # Intermediate Connectors:
4alibration Block: (o/Jq3oe/ Calibration Setup: Scan File No.:. A zv._ -o.(t.I I Initial Calibration File:.r oZ.,o.'( A M*,.,'I-. e'*-
- Final Calibration File: c nm.wro ,=eurnf r 7.7-3-.4 Scan Start: Z = -o.1, Scan Start: 9 = -* ' Scan Stop: Z = .. ol1.O Scan Stop: 0 =3*"
Index Increment: 30 4 Channe
/
Anale 5"0 ° Serial No. 5oc..lG p.( Comments Results.
- r) Recnrriable Indicatlon* Leak Path Detected "Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: ' Date: Reviewed by: ,, - Level: -- j- Date: /'.,/' 2-.
/
TYPICAL DATA SHEET FIGURE 5 foloz, Page 31 of 32
"A CRDM Nozzle Ultrasonic Examination Data Sheet PRAIAATOMS ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: -15 Procedure: 54-ISI-100-09 INozzle Dimensions: (im) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg*): 289 End of Noz. (in.): 0.37 Probe Serial No.'s: Ch I S0416CN Ch 6 n/a topI 'Ž'~ de~i~,~ 'U Pi2 n/a Ch7 n/a r~ ~ ("* -. ~Ch3n/a Chi8n/
Circ. Scan Start:j -5deg @ -0.7 ,, Stop: 365 Ideg @1 7.0&801' Setup: 3 Ch4 n/a Ch9 n/a Files: A2268_10.15.41/10.51.38/11.30.50/11.43.10 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angie TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) '_ (in.) (deg.)
--- (In.) Ratio Orientation_ Min Max I NRI - -- _ _ -3 -4 -5 -6 _ -7 10 11 12 13 14 3nlye 16 by:___ 9__ A Date:
17 169 199 229 259 289 Degrees 349 19 49 79 109 139 Data Loc. 289 319 300 330 360 Degirees 150 180 1210 240 270 0 30 60 90 120 0.37 0.37 Inches WELD Noz. Loc. 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 10.37 0.37 0.37 Inches PROFILE Noz. End 5 80 5.65 5.33 4.82 4.28 3.64 3 21 3 21 3.17 3 64 4.22 4 82 5.33 1.50 Inches MAX. 4.28 4.20 3 83 3.04 2.21 1.76 1.67 11.93 2.08 3 04 3.60 N MIN. 11.50 248 degl with an axial position of 6 03 Limited Sc'ant (YIN): Comments: Measured Thickness: 10.631 1 theta of
... Analyzed by: /Dae
(*Date: /..
-'*....by Anayze 9/25/027:49 PM Nozz 15 Page I of 2
-C It; 22 >2 FRAMATO-ME ANP
'~ 4¶t%~j~ $
'.4 : ~'-
4
~
40 r I r 14. --------------- ------------------ 14.0,4 ------------ 4 13.5 "--- - - - -- ----------- ------- 44 4 ,ý," . 44Y4444 13.0",'-' a - -- - -- -- - --- -- -- - -------------------
---------- 7 -------
------------------- 44- -r ' -- ' ------- z 4 4 4 12.5 4 4--- -- -- - -- --
----------------- , , ., _., I 12.0~ ------- ---- 7-4 11 5 ,1 _ ---------- 7--
11.0' 4.444444444k-- ------------------ ------------------- - - - - - - - - - -4L
- - - - - - - - - - - - '-t---t-.
10.5 ------------------ ------------------- 10.0 ------------------ ---------- -- --------
- -- -- - -- - -- -- - -- -- - -- - 4-54---'--4----------
9.5 -------------- U,--------- ------------------ -------------------
------------\ý_
9.0 ------------------ ------------------- 4 4- 4 ------ 4----4 4 8.5 ------------------ ------------------- ------------------- 0, 0 8.0 ------------------- -------------------
'C U 7.5 ------------------ ------------------- -------------------
C 7.0 ------------------ ------------------- ------------------- 6.5 ------------------ ------------------- ------------------- I 6.0 ------------------ ------------------- -------------------- 5.5 5.0 ------------------- 777ýýý 4.5 M 4W4WR4Mnt4fl4444i4444 f 54flC4i4M4WPUWflfl44nUI I 0*flUU4WNiSSUShiU4 AdSM$UWduuuuunnmauu. Li iemuua4mun4erneuaevau, I. I.ntAuid.4dh44i44.4.ahddUd.444. A- uie.see.nee .... ARon I Iffi'momm gm&m 4.0 3.5-4 4--- -- -- - 7:7777___;<
----------------- --------------I----- 4 4 44 3.0 ----4 4--- -
4 --- 44-- 7 ----------- 7 '444444 Downhill 2.5 4 4 4 4 4 - - - - 2.0 - 44 4 4 44 4 4 - - ------------
-------------- 7----- Sldez 1.5 4 4 -- --
4--
- - - 4 4 4- - - - - 4-- - - -
.................... 4 4. 4444$
'.4(44.
10 4 - -- ----- '-- 44444444444444444444444444444444444444--'+--'- A
-- 4----- -------4--------.;A 46..
V 0.0 4 4 1 44 4.4. 00 4"~ ' 1'50 -k 00 5.
- egr -300
- e-<.
-2 -3 -4
-6 -7 -8
-10 -12
-13 --- 14 -15 -- 16
-§i Noz. End ~1 N""a"01Uphill / Downhill demarcation 7:49 PM9125102 Nozz15 ChartlI Page 2 of 2 1%
9C.. FRAMATOME-ANP NOND2STRUCTIVI* FXAMllATnt'lJ I=trtl I Remote Ultrasonic Examination Of Reactor Head Penetrations IR PROCEDURE PQ NO.: PQ-100-1, NO.: 54-ISI-100-09 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration rRA.MAT.CME AMP Ultrasonic Examination Data Sheet Customer: W M C. Plant: - Sek Unit: Penetration No.: /ICI Procedure: 59- lS/- 'oO-0'j Equipment: Description VH# Cal. Due Date SN# gTomoscan I I /-/03 16 Channel P/R N A NIA 1/,A ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Versionq3*< 53. Cable Length: - Calibration Block: Scan File so.: A.- A6 90' 0/19q30'/ 8, b.oo. Type: .2.- i-4-q # Intermediate Connectors: Calibration Setup: Initial Calibration File: Az24.8-.o'At. I I Final Calibration File: , pRz.pawm, Scan Start: Z-. Scan Start: = -5 Scan Stop: Z = 7%.? Scan Stop: = 3L.S* Index Increment: 30 Channe Angle Serial No. Comments
/
Results: (!ýo Recordable indication-s Leak Path Detected Axial Fla-ws 0e ec ed
- Circumferential Flaws Detected Comments:
o-[" Aoz/e e. ,,,, ,,W44L Su. 4 C. Analyzed b,: Level: 7Z7 Date: '! Z*0 Reviewed by: -. eve!: 7 -.-Date: 1612 oZ._ TYPICAL DATA SHEET FIGURE 5
/L\24 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: 16 Procedure: 54-1S1-100-09 Nozzle Dimensions: (io) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 330 End of NoL.( In.): 0.64 Probe Serial No.'s: Ch i S0416CN Ch 6 n/a
!~~;~~§I~I I~I~t~: ~ d~; C2n/a Ch7 -n/a Circ. Scan Start: J-5deg @1 -0.7 " Stop:l 365 Ideg @l 7.97(' Setup: 3 Ch4 n/a Oh9 n/a Files: A2268_08.00.05. A2268_ oS,.SI.53 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (In.) (deg.) (deg.) (In.) (In.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 23 ,,__
4 5 6 7 9 10 11 12 13 14 16 17 Data Loc. 330 360 30 60 90 120 150 180 210 240 270 300 330 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 Inches MAX. 2.96 2.92 3.43 400 4.77 5.24 5.48 5.42 5.17 4.61 396 332 296 Inches MIN. 1.35 1.29 1.64 2.09 3.18 3.79 4.17 4.12 3.72 300 200 1.42 1.35 Inches Comments: Measured ThIckness: 0.62 @ theta of 34 degtwith an axial position of 4.84 Limited Scan? (YIN): n Penphery nozzle. Distance to end of nozzle is 0.58" downhill side. Nozzle also has chamfer on ID surface. Analyzed by: *Date: I 2 !z. Analyzed by: Date: 9/2510211:52 AM Nozz 16 P;ige I of 2 j
i%4;4-jI * '5t1.t.s,
-, - ~ ',Vi,. 't ' . ' .,.
4.0 . ' "a. ,'A . ",, ,+ff<',::-' . I.w% ',=
.,..FRAMA'OMEANP 2("~,
A.'.'.) - :; ' Q , ,-' N.l1
,. Profile' ' . .
.,_,------- ,,,-,-, ; .--... ---- --- . . ...... 1-
..I --- - -- ."*,
1 244-
.5 °, ..- - .. - 4. -4 r. ' - -
- if',
.4
-........... r . '-,
12.0'1,, I - - - - - - - - - - 'V.
'120 -------- ---
1 1.5 -- - - -- - - - -- --'--- -- - --- - - - - - - - - - - - - - - -- - - - - - - - - - - - -- - - 111.0 ----------------------..------------------- ------------------- ------------------------------------------------....... ........... 1 0 .5 -- ...------------------- --------------------... - -- --- --. *... ------... ----- 10.0 [. ... .... 9.5 Z Z Z Z Z Z Z Z Z ZZ :Z ZZ =:ZI...... 8.5 - -------------------. 7..5 ...................--- ..------------------- .---------------- .--- .-----------------------------------------------....... 7.0 .. . . . . . . . . . . . . . A
... --- .. --------------- I-----------
6.5 ------------------- .................- ---------- ,--................---................ ---................ -.--.......... 6.0 ------------------- -------------------- 5.5 5.0 4.5
---- -------------- - I -I - -LD MIIUNUVU i[dl I ME i ut u fm n sn n L nfleigeeef lheulnnf ig leirn iAI mnInlni.lrlm ml" I i. iis.
4.0 ----- 3.5 ------------------- ----------------- --- -- -a.. 3.0 .. .. . .4 . --------------- ---------------------- Downhill 2.5 ------------------- ------------ -- --- .......... 2.0,. -------------- --------- ------------------- ---- 1.5: 7-7-1 7----
------------------- ------------------- ;?',
ý. I *f l'.
----------- 1 ----------------------- - -- '9" 0.5 .. ; : 7... I 1 11 .
- 4 " 4, 002
",200i ' " 250':' 4
-2 -3 -4 5 -6 -7 6-8
-9 10 "-11 12 13 ---... .14 ,15 --- 16 inNoz-End -- 1 -- ,=IUW"Uphill / Downhill demarcation 11:52 AM9I25/02 Nozz 16 Chart I Page 2 of 2
.ri Cu~
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE I Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration FR- UAOME' AMP Ultrasonic Examination Data Sheet Customer: W MvC- Plant: 8.-
&eAr- Unit:
Penetration No.: /7 ' Procedure: 5q- ISI- .1O0-c Equipment: Description VH# Cal. Due Date SN# gTomoscan " "1/1 3 .o1q 16 Channel P/R NA Nt/.A/A ACCUSONEX Data Acquisition Software: Version 622.5 ACCUSONEX ""'DataAnalysis Software: Version* .7. 97,* Cable Length: 9' S Type: 2- t4-q # Intermediate Connectors: I Calibration Block: "(,o/ 193o67/ Calibration Setup:
'can File No.: .4 ,?2 b7-,-, 2.9 Initial Calibration File: +,Pvgq'-/- 1 ,,O*
19 *, 6"*-- 2. a-5o" Final Calibration File:L.zJu', ft-otsqgc 74 ,r.41, Scan Start: Z = -. 7 "Scan Start: 8 = ' Scan Stop: Z = ,79Scan Stop: 0= Index Increment: 30 Channe Angle Serial No. Comments
/ 5"°- e Al
/
Results: Ecordable Indicationn Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: lAnalyzed b~y: 6,7 ,40- Level:
- Date: 7-2-O1Z.
IReviewed by: Level: .. t~Date: / 9O TYPICAL DATA SHEET FIGURE 5 Lk dct-2$tc; Pace 31 of 32
0 A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOMM ANF* Customer: Nuclear Management Corporation Plant: Point Beach jUnit: 1 _ Nozzle: -17 Procedure: 54-ISI-100-09 Nozzle Dimensions: (ire) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg*): 330 End of Noz. (in.): 0.48 Probe Serial No.'s: Ch 1 S0381CN Ch 6 n/a xial n *%Sf*'>.J. tb:J... Ideg\@ .,i ,-";Setdp';,L.. Ch2 n/a Ch7 n/a AU,~ k Ch 3 n/a C118 n/a Circ. Scan Start:[ -5deg @L " Stop:l 365 Ideg @1 7.781 Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_20.00.29/A2267_20.25.05 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial uAdlsted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Mn Mi Max Max Total Mi Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (dog.) (in.) (in.) (deg.) (in.) Ratio Orientation Min I Max 1 NRI _ II_ 2 ___
-3 -4 -5 6
7 8 10 i 11I 12, 13 16' 17 240 2 7 0 i 3 00 3 30 Degrees' 90 12 ISO,0S 2 10 ata Loc. 330 3 0 30 60 330 360 Deglrees
'D 210 240 270 300 90 120 1' 9 Inches Noz. Loc. 0 30 60 0.48 0.48 0,48 0.48 WELD 04 0.48 0.48 0.48 0.8 10.48 0.48 0.4 8 1 .8 3 98 3 76 Inches PROFILE Noz. End 2 6.18 5 .88 5.24 4 61 39 4.11 4.68 5.31 59 2.16 1.7 9 In c he s MAX. 3.76 6 4 .68 4 .2 8 3 .43 2 67 2 .7 1 3 52 1 .4 N
,M IN. I 1.7 9 1 .910 w
alith an axial pos of ition 32 6 Lim ited Scan? (YIN ): 1 A-theta of 18 11 de Gom ents: nm Measured Th c n ss: 10 64 4' ae Date 9* OLOZ'/ Analyzed by: SAnalyzed by: " -7* U) 4 (:30- - W-9/251029:05 AM Noz 17 Page I of 2
Z JO1 abed ý JJE4Q L ZON ZO19E16V'JV 90:6 A4.. ~ ý,
*,JfA.'~ 00
". t; ," Aý., A
-------W.-6 I-,- ,+/-ntt Inanaunn n q u WMý q
,n
----------------- ýZýý
----------------- ------------------ .................. I .................
------------------ A-C
--A--- A:
A-- - - A - - - A-
----------------- t-r--------- ..................
` ,¶I A I
, .... . t I~
A~t A~?A
~th
-- - - - -- - - - ----------- 9 4,V A 9AT A
Oil
~
6
'i J
.... A
.. .... A .. ----------------- "m A' - - - -- - - umvmm O
. .. A....'...
--- AA-t--'-6'----' ----------------- '--------- I----------
A..
.. . A
-- - -- A '
---------- -- 6--*-
------------------ - A--------- ---------------- 'A AA6 5? A-A., 'A A lAt AAAAA,,j';
6, '
- AAj AA1 ,AA'AA UIA Ct A': A A"A 5
Ci L.. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE t Remote Ultrasonic Examination Of Reactor Head Penetrations P PROCEDURE NO.: 54-iSI-1 00-09 PQ NO.: PQ-i00-I, 54-PQ-1 LO-21 3,14 an~d 5 A Reactor Head Penetration PRI*AMATOMC AXP Ultrasonic Examination Data Sheet Customer: M IC. Plant: - 13e,,-. Unit: Penetration No.: "Procedure: 5'-/i1- oOD.-O'> Equipment: Description VH# Cal. Due Date SN# Tomoscan' I/1 11"10 2o-C,zozq 16 Channel P/R NNA NI I I1/A ACCUSONEX "' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version -. 7.'S , Cable Length: gol Type: Z&- 1 # Intermediate Connectors: I Calibration Block: d~o//q3o / Calibration Setup:
"tcanFile No.:. 4;7'2.;'7 /J7. 0B"S Initial Calibration File: S7:226.'-,
$'.OV/
Final Calibration File: co.-WVC' PZ-raMA . Scan Start: Z = -. 7 " Scan Start: = -,s Scan Stop: Z = ?F" Scan Stop: 0= Index Increment: 30 4t Channel
/
Angle 5"oL. Serial No. 0* .) C.*A.) Comments Results: REEF~e-cordable Indicat: Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: T Date: - y ,2 Reviewed by: Level: -Date: lo.q-02 7'" TYPICAL DATA SHEET FIGURE 5 LA CRSV2 51 0 Page 3I of 32
A FR AMATOM E ANPI CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: 18 Procedure: 54-1I1-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 142 End of Noz. (in.): 0.66 Probe Serial No.'s: Ch I S0381CN Ch 6 nla AkiahSca'rn- Wit, S' n/a Ch7 n/a Circ. Scan Start:[ deg @ 07"
.Th ~ ~~ Stop:I 365 Ideg ~ @1 7.76' ~
Setup:[3 ~ ch~3 Ch4 n/a n/a Ch 8na Ch9 n/a Files: A2267_18.17.08/A2267_18.56.20 Cal Block SIN: 60119300 - ChS n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI . . ." . 2 2 4 7I; 8 9 10 11 12 13 14 16
-V
-7 17Data _ Loc._ 142 _
172 202 _0 - j - 232 7 262 292 322 _352 22 52 82 112 142 DegreesI PROFILE
- _w _ _,,_ _
WEL Noz. Loc. Noz. End 0 0.6 30 0.6 60
,6 90
-__-o_.
0.66 066,66 __ 120 0.66 150 0.66066 180 0.66 210 0.66 240 0.66 270 0.66 300 330 360 Degrees I c e MAX. 3 41 3 63 4 04 4.59 5.22 5.73 5.94 5.83 5.33 4.76 14 09 13 61 3 41 Inches MIN. 1 68 1.77 2 05 2.75 3 63 4.24 4.63 4 46 3 63 2.93 12.27 11.73 1.68 Inches Comments: Measured Thickness: 0.63 @ theta of 305 deg with an axial position of 6 99 Limited Scan? (YIN): N Analyzed by: .,l_ 1*f _._Date: 7/"Z5- 0--. Analyzed by: ,aRDate: 9/25/029.04 AM Noz 18 Parle I of 2
,, " C'\
'1 .,; '+" + " .. +.,'"t* ;I ...."_. ..j..-
ANP"..... .. ....
-..... 4L':
-4t2' ""+ + ,
1' "44" Nozzle " 18 "+3/4"','"
.... Profle... , ., .',
, ',*+ -'" *
" + %
* , . ' Any 1*1
,.. ....... ........ ... .. '... .,.......... ..... ,.+.,.,. " .. .. .. 0 11 . -' " " - ,-1 ,- -.--------- --- .... .
A A.... S m - , - ' ., , 4. 13 "0.. 4 ...............-................
,--------*------------------- I..... ... .
125" 1--- '-- 1 1.0 .. . . . .. . . . . . . .. . . . .. 1. . .. . . . .. .1. .. . . . .. . .,... . . . .. . .- . . .. . . . . .. . . . .. .I' . . . . .. .'. t.. ".. S1d0,0 405 ..... WIWIU -,......... nu................. fStN................. i4...........N .. - UII................. .......... IHISUW Ia
...... m........... I ..........
a" 21.0 -i---- --- -- --- - ---- - --- - e 10.0 -...---------- ----------- ------------------------- .
-- ---- ----- 3 4-- -----
7--
*,* 1 . +, . +*+*: ,. 2 0owhildearato Uphill- --, - --- - : --1)-- .+S -
, -- '< --* * -, --3-(0- -- . :*-----------------
7
* --oz--End-
' 7.0
.5 N---- --- ---
. +.. ----------- -------------------------------------------------
f-- 16.5 200...J...250.* ....................... 3.......... 4
................... Downh- i 19.5 .....--- ----- ----- -P-age-2-of----2 - -.......-.- ---- -------- .-.------- -- . ..
"+ -- 4.5*,---- - - -4.5--- -- -- ---- -- ---2----- *4 4 *,
-------- -o------ ------- ----7 --
------7
- ~~~~~~~---
- 4. ---------
5----- --------
+-- 3-.. . ------ --.-----
' " p ll ow hl e act o ... .
i J *- --------- .. .. Page..of.
-M/ ----- --------- --
- -- 5
9C , FRAMATOME-ANP NONDESTRUCTIVE EXAMiNATION PROCEDURE Remote Ultrasonic Examination Of-Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 SPQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Ak Reactor Head Penetration F;ZAUA-T,.= A Ultrasonic Examination Data Sheet Customer: ", hi .. Plant: Io,-%- er,~k Unit: Penetration No.: t9 Procedure: 5'/- IS/- Jo0-Orl Equipment: Description VH# Cal. Due Date SN# rTomoscan " 1 ozzq 16 Channel P/R N/A tA4,AN1 ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEXj* Data Analysis Software: Version 3W8* & .5 Cable Length: Sl Type: Z&- i-'-q # Intermediate Connectors: I Calibration Block: ,o/)q3oEi Calibration Setup: 4Scan File No.:. A zr_ 0T. Z.0 Initial Calibration File:4z2(.9.o.,,1q.-3 A .vw7,q - Ol. S1 . 3s Final Calibration File: e.jr,,wucD rp*,-vOzwA Scan Start: Z = . "." 7.Scan Start: 8=-- Scan Stop: Z = :7.78 Scan Stop: 8 = 7t,,S" Index Increment: 30 Channel Angle Serial No. Comments 0 5oi-. so -qC
/
Results: (.ro Recordable Indications Leak Path Detected Axial Flaws Detecte Circumferential Flaws Detected Comments: Analyzed b'y: Level: Date: (eLo0z Reviewed by: Level: _-Date: io/ Z TYPICAL DATA SHEET 82 ,.l'L* FIGURE 5 Paae 31 of 32
0 A" SRA MATOMME CRDM Nozzle Ultrasonic Examination Data Sheet Ar.jF= Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - Nozzle: - 19 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 314 End of Noz, (in.): 0.41 Probe Serial No.s: Ch I S0379CN Ch 6 n/a 'AYai sc -sl'rt:*-. d l' -, t.* , I " ,. ,..s h, "Ch2 n/a Ch7 n/a i , -- . , . " .. Ch3 n/a Ch8 n/a Circ. Scan Start:I -51deg @1 -07 1 Stop: 365 Idog @1 7.78 Setup: 3 Ch4 n/a Ch9 n/a Files: A2269 09.30.20IA2269 09 51.35 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI ** 2 ' 3 4 5 6 r7 8 9 10 12 13 14 15 16
`17 Data Loc. 314 344 14 44 74 104 134 164 194 224 254 284 314 Degrees WELD Noz. Lom, 0 30 60 90 120 150 180 210 240 270 300 330 360 Degirees PROFILE Noz. End 0.41 0.41 0.1 0.41 0.41 0.41 0.1 0.41 0.41 0.41 0.41 0.41 0.41 Inches MAX. 3.39 3 65 13 91 4 44 5.18 5.49 15.83 5 73 5.27 4.59 3 96 3 56 3.39 Inches MIN. 1.81 2 08 12.29 2.88 3 43 14.00 14.50 4.15 3.50 2.91 2.10 1.92 1 1.81 Inches Comments: Measured Thickness: 10 617 @*theta of 2401 denl with an axial position of 6.31 Lim ited Scan? (YIN): n Analyzed by: -" ._ Date: 6/.t,
- Analyzed by: -J7A- Date:
0ý 6 ocj4Lb-o1. Page 1 of 9/26/023"42 PMa No=z19 o 2
ZJO Z GLed I. P2e4o UL ZZON Z019Z1/6V1d IV; 4 l ,- #,,.i *4> 1 Ul'.
ll u - r - ';, . .~ I4lI I'.. . ... .. . 4.. , . .4 ... 4 ...4 . . .. - .. I 4 4 5 7--------I------ 4- -- --44 , ~4<
-'-.-~?.t~
-:-- -----'I,'..- ---- 4 ----- ----- 'k --- - - - ')'-4~ - -v t4
-4 . . . I - .. .. . . . - .. ............ .. . . O- . -- Q <
--- 4....4..... - - --. 0'0 IIlJUAMO ------------------------ .......... - "-----
. .. . . . . . . . . . . . . . . ."-T . -.--.-.-.- - .-.- . .-.-.-
-.-.-. -.-.-..-.-.- .-.-. . ..-.-. .-.-. . ..-.-. .-.-. . ..-.-. .-.-. -O- -.. .. ..-. . ..-...-.-.-.---.-.-
' ---- ----- ---- : ,, 7 t t 4 ----- ---- ------ ---------------------- ------------------- ------------ -- -
W4.' 4
& ~ ---- ~~-- ------- --------------------------
-V - - - -- - - - - m u o a *
"" ' *-'------------- - - - - --- - - - - - --- - - - - - - - - - - - - - - - m -- - - - - - - - - - - - - - - L A,
4VN. 14 -17
--- --- --- I........
-_------.-- -- --- --- --- . .... ----------- ,----"-..... "- * ------- . *, To. +t+" "
I..t - - -.-.. .-- . .... ... -- . . - . - -- . ,t A > A !'
, X" ' * $ ,; " , - " "* . . . - "'-. ... . "-.. . . . .. .
.. . . . .. . . -.4 , "
'"b'&
ttff 9jn 4' 4 4 44 ¢' 4 .4 Z. r'v 1 f_.4j4 ,'
- 4 4 ri, 4 4 7
~l%rs 4& !. Wia*, :'lil :,/-,
-W N~U.: MA-IUU-1, a44'L-tU-MZ,-, 4 and 5 "A1/4 Reactor Head Penetration r-RA "&T,.M AMP Ultrasonic Examination Data Sheet Customer: 1* IiPlant: 6 xj 8 e4.ekl Unit:
Penetration No.: p0 Procedure: 5/- I-Equipment: Description VH# Cal. Due Date SN# gTomoscan Z-/'s/c~3 2.O2.sq 16 Channel P/R. N/A N,1A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX MData Analysis Software: Version Y.T oV Cable Lenglth: S; C), Type: 26- i-,,- # Intermediate Connectors: I Calibration Block: '6.o/),3o*r, Calibration Setup:= I Scan 2 File No.:J7a.qrTz.I
- J7977.r*, ,f2
*49-It..-. sr.ol.j-..d.o., It. 79,.o Initial Calibration File:4:226?-W v.
Fn1Ci~r~tn 2P.2? Scan Start: Z =- Scan Start: = Scan Stop:- Z --= "Scan Stop: . Index Increment: 30 Channel Angle Serial No. Comments Results: ecordable l Indications Leak Path Detected Ax-a Dm c. Circumferential Flaws Detected Comments: Analyzed by: . Level. 2 Date: . I Reviewed by Level: I Date: /-'. o .. I
/TYPICAL DATA SHEET FIGURE 5 i
ý CkViD-L Page 31 of 32
I' A A KAAr.A A CRflM Nln77l I lhrcnni,. ,a..arnuujii
- . . vm IJaLO JIIL Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 20 Procedure: 54-lSI-100-09 Nozzle Dimensions: (1A.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg:): 295 End of Noz. (in.): 0.25 Probe Serial No/s: Ch ' S0379CN Ch 6 n/a SP d f *i,; Ch 2, n/a Ch7 n/a AM. 9 ~ Ch3 n/a ChB n/a Clrc. Scan Start: -51deg @ -0.7 " Stop: 365 Ideg@ 7.76 Setup: 3 Ch4 n/a Ch9 n/a Files: A226915 53 41117 06 3917 09 37117 43 31118 02.35/18 34 30 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (In.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI '_,
2__ 3 L 4 5 6 7 9 10 11 12 13 14 15 __ _ ____ 16 17 Data Loc. 295 325 355 25 55 85 115 145 175 205 235 265 295 Degrees WELD Noz, Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Inches MAX. 2.90 3.12 3.62 4.01 465 534 5.50 536 4 87 4.21 3.58 3.26 290 Inches MIN. 1.16 1.38 181 2.25 308 391 403 3.79 3.16 2.51 1.97 1.36 1.16 Inches Comments: Measured T"hickness: 065 1 theta of 282 deg with an axial position of 5671 Limited Scan? (YIN):_ N Analyzed by: Date: -2C-o "L.-- Analyzed by: JA Date: 9/26/200210"41 PM Blank Clrc Blade Data Sheet (2) Page 1 of 2.
SJo Z 86ed I. iB43 s1xq3698]d-eqoJdopejqsn OOZI/9gI/6vd WM:OL
,xp
___uoj*eoejwep Il1qutAoa 111dn L- PUA ZOfN,--- "/ S9L - ". -,.----- CL
-- LLL- OL- 6 98 L 9- 9-7 Z-'S a'5'-S--' ".~'~ .. >7 I-l OO !8 -. - ;. ,i
, . , ,,v',
-t2......... i _- L_ L _ " Os 0 ,
...........-....................--.-..-- 7.--..---..-.....
77.. .......
.. .... . ....... I... .-
... . .. . OPI .... .. ..... .................... ........ ..... .................... . . ...................... . ....... ... 0"7
.- ---- - -.. . ...............-+........... .... ................................ - -- - .-. .* ....... .... .......-....
. .................. ........ .... . ...... . ... . ................................. .......................................... .............. - . _-....,. .0
... ..... ........... ........... ..... ..... I..................
...... I.................
S-. -............. .... .. .. I.. ... . ... .. . ..... ....
- .4- -- - - .:-.................
.. ...... ............. . . ... . ...............- ,. . ..... 0.,,
* .',.4**;'*.
"'3' ..- -* - 4;* }*
- " - -*"* 4 T' - -'* - - -. - - . l" -... . ...... ... ...- ............-.....
l"'............... .-
""';..........l
.. ....... .. * .. 9-1*
S 6
. . . . . . . . .---..-------- .7-.------..-.-...-..---.. -
-11 A'- -.-.--.- ---. --.-------.. .... :.-.-----A.-----0 A... - ... . ojW, I
, T7 7774 .... . .......... . . . .......
-,,,, +
44*+;+'*J*.* ++.,,4 .;. .,t ..+.( +.:.+".,++_.,.+ 0 Iv f,, ..... ilJ,O~ OZ elzzoN ,, +-; - -,- .. , .t';, *'"t- ,:-*,. ..... t" - 44' I' 1 Lit 4 tL2 4 4 42& 4 OK. r,. c, -4. 'I 4 AM Ž~~C;3 Y ~ ~ ~C~' .. 44 - - '-yau.. :~" 4 t-"~-'V - .7 re,-$ ---. I ;,-y+. Oj ',I'J9 d 4 or,.I;rN *M,. ,-.t'" dN,,ab*Io+v.g.t-I r , .." K (--Ii'
- - a."-.
CuZC FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE L-AZ. Remote Ultrasonic Examination Of Reactor Head Penetrations P PROCEDURE NO.: 54-ISI-100-095a PQ NO.: PQ-1 00-1, 54-PQ-1I00-2, 3, 4 and 5 1kReactor Head Penetration tRAMA1WEMI AMP Ultrasonic Examination Data Sheet Customer: M IYc_ Plant: ,-L 8eArkj Unit: Penetration No.: ZI Procedure: 59- 1is- .0-ey1 Equipment: Description VH# Cal. Due Date SN# gTomoscan I/z,1.3 16 Channel P/R N/A N1 ACCUSONEX' Data Acquisition Software: Version 6'.2.5 ACCUSONEXm Data Analysis Software: Version . g: 7 . Cable Length: GO' Type: .'- ri-, # Intermediate Connectors: I
.Calibration Block: g.o//,3061 Calibration Setup:
Scan File No.: -,h 0.o5 ..-. ' o Initial Calibration File: . .,Z
,44q.- /.
Il- WO. Final Calibration File: p('e 1ogajw 15j, Scan Start: Z := Scan Start: e =Scan Stop: Z = -. C,! Scan Stop: e=03. Index Increment: 30 I .Channdi Angle Serial No. Comments I j. Results: tNo Recordable Indications "* Leak Path Detected SAxial Flaws Detect-ed Circumferential Flaws Detected Comments: Analyzedb: Level: Date: rReviewed by: 4 ,..... Level: J Date: / -/y .. TYPICAL DATA SHEET FIGURE 5
ý -01110V Pace 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - _ Nozzle: .21 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 312 End of Noz. (in.): 0.22 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a xiiStn\f ',u S et~ 0:~'in Ch2 n/a Ch7 n/a
- iet~f ~.E.. ~ ~ ',1-;,*, ,.~n/a Ch8n/a Circ. Scan Start: -5 deg @ -0.7 I" Stop:I 365 Ideg @c 7.78 Setup:I 3 Ch4 n/a Chg n/a Files: - A226914.50.12,_14.10 46,_14.00.03,- A;q.fl,:(,:p.%7,Cal Block SIN: 60119300 OChS n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI
-3 2 _ -4 -6 -9 10 11 12 13 14 17 Data Loc. 312 342 12 42 72 102 132 162 192 222 252 282 312 Degrees 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc.
PROFILE Noz. End 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 Inches MAX. 3.32 3 45 391 4.52 5 03 5.55 5.73 5.59 5 27 4.57 396 3.41 3.32 Inches MIN. 1.57 1.70 2.18 2.73 3.54 4.24 4.55 4.50 367 280 2.10 1.70 1.57 Inches Comments: Measured Thickness: 0.653 @theta of 302 deg with an axial position of 5.59 Limited Scan? (YIN): n Analyzed by: Date: t,/& ,- _, Analyzed by: Date: 9/26/025:54 PM Nozz 21 Page 1 of 2
Zo 10ZQ~ SljetIo ýZ ZON ZOI9ZI6N~d V9g:9 uo1ea1ewep IIqUMOa I II!Lldfl PU3ZN 6 9ý- 9- 9-U' L c
'4' 4444444 4\.444, - 'P 4.44444 4444 4 -.
.4'44 4444)4.4 444, 44,4 444444 4 44 4 4 44.444. s 4 44. I44~
44 44!
,,z 049 4 00V44 4.44, 4 4 4,4 444444444 444 4
-------------- I...... -- - - -- -
4444
- ý,4, .... ....
4444 I-444 4---- - 4--4
.44444. 4444444 444 444444)444444444.4444 *44 . . .. . . ....
------------------ -.. -7 ----------------
.4-- - - - - -
- -- --'4 *---44-444
- - - - - 4 - -4 07 97 liIqumoa 444'44 44444444
- - -444----
---- 4 OT 4444444444444
-- -444--- 4-40044 44444444
,,UU4NUIUA.U44U
.. maI~
,,~lU4N4TIIEA Mmmin~4UUIh 4-n~UuIII~U4U~EU 0IUUA1IEmul'm 9.9
------------------- -------------- 0,9
'9*
-------------- O*L GL
------------------ --------------- --.-- O's
-------------------- G's6
- 0'6
------------------- - 90I6
.0*14
- - - - - 44 44-- -
- Totr
---------- I--------
~
- - - - -4 I4- - - - - - -
-- - - P- - - . '- '
~~~~~~~
4~ - ~-,-44 . 4-4-.- - -~- .-.
-'-4
;4
- 4 7, 1 ---------
1 "4. I4 44 44 4 444 4**4 444 44*4 4 4 4* 4) .44 44.44 4..4
.,,*4444 4444-444
*s...L 4447-
444*44'P* 4.444 4 4444 4,
*44*4 444444.
4.4 .4*4. 444
*"r.:
V4 444. 44 444444 4' 44444 .4,
- '*Z*44 44..,. 4.;44 444
. 2 -
*4 44 4 - -
- 4 ., 2,*'*
- .4-,
01C1 - FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-SI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-Z 3,4 and 5 Ak Reactor Head Penetration FAWAtME A1NP Ultrasonic Examination Data Sheet Customer: Wm, Plant: &,y.k.Unit: aerkI Penetration No.: Z -- Procedure: 5q- /-/- DO-0" Equipment: Description VH# Cal. Due Date SN#
.Tomoscan "
16 Channel P/R N/A NIA "1/A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3-" ?..? Cable Length: Sol Type: -2..- t-q # Intermediate Connectors: 1 Calibration Block: &o//1q3oD/ I Calibration SetuD: I Initial Calibration File: , 7z&9-0o0 1q z.,
"IScan File No.:. AA Z?- -i-oc'. rj.s(
2zCoq0,,t-.19 Final Calihratfinn PIl. .Ole,& r_1, M F-C. Scan Start: Z - - o.1. Scan Start:O= . Scan Stop: Z =9 a I(. Scan Stop:8= ,' Index Increment: 30 Channel Anqle Serial No. Comments
"/ 50 503
$ 7-:l c4 Results:(,r No Recordable Indications, Leak Path Detected
- Axial-Flaws Detected1 Circumferential Flaws Detected Comments:
Analyzed by: Level: Date: */ 0/Z Reviewed b y: .Level: -Date: . TYPICAL DATA SHEET FIGURE 5 q0 q-*1.6 101&- Pace 31 of 32
9 A SAdMATrcM A ANIJ CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 22 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iPr ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.'): 331 End of Noz. (in.): 0.35 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a 'A Itdeg@.9*,,* _*al o,, .tJp:lT C h2 n/a Ch7 n/a Fes. "1"'.'7 Ch3 n/a ChB n/a Circ. Scan Start:[ -5deg @1 -0.7 1" Stop:j 365 Ideg @I 8.11 " Setup:E 3 Ch4 n/a Ch9 n/a Files: A226907.45.19 IA2269_05.51.51 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adlusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (dog.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI 2 __ 3 4 g 8 9 10 13 14 16 Data Loc. 331 1 31 61 91 1121 '51 1 18'1 211 241 271 301 331 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 Inches MAX. 3.34 3 30 13 84 4.46 5 01 5 51 15.72 15.60 5.21 4 69 4.14 33666 3.34 Inches MIN. 1.86 1.74 1.90 2.59 3.48 4 07 14.51 4.39 3 87 3.14 2.38 1.977 1.86 Inches Comments: Measured Thickness: 0.653 @ theta of 265 deg with an axial position oFf -:'6.73, Limited Scan? (YIN) n Analyzed by: ie .-_- Analyzed __Date: by: Date: 26
- 0* Nozz 22 Pare 1 of 2 9126/023:58 PM
S* ,.1-",t"s
.~ " "-r'"1'"..t :d ;- * "- > ",,-"' Nozzle; 22 Profile' :
RAMATOME AN7 , , Pi
'!14.5' '-...------'= - "- " = . . . - '... - .--- -- '---"-"-"---"-"-------- .0 135. .*, ~~~~~
.. ' '.---- .. ... ... .."-----'..4, '".. :' 3... "....... '
~---- . "., . . .. . . .. .. . . .. . .. . . .. ".. . '-y.- -"," -" .. .h-"- * ----
* -' *l,-.**
130---------- --- --- ------ 'C 12 0.5 - - - ------ . r- - - --
------------------------------------ -,5 1 -- - --- I 12.0 - -:...----------.-------...--- - - -S [""
455 8.0 .- u------uhaf--ggga---ugu----uuuf--ua
-.-.--------------- ----m uu
.-------------------- ......... sau m...-m .
-------- .---- .--- n-200
--- --- -.-uuurm
-~uuu -ruw 250
-u--
-~nt~~tuM fn -St
-mnu-u-su-u-mt-t- ,
"9 .5 .................. r . . - . . . . . . . . . . -- . . . . . . ...................................-- - - - - ....---- ---.
9.0 .... ..........................---- - ...... --------------.... - .-- 8.5 -.------------------- .------------------- ------------------- --------------------------------------------------------------------------...... --. 8.0 - .------------------- .------------------- ------------------- ---------------------------------------------------------------------------..... t-- 7.4 .5- -- - - - -- -- - -- - -- -- -- ---- - - -- - - - --- - - -- - -- -- - -- - -- -- -- - - - -- - - -- -- - - - - 639 ,5.4
.0-M5 - ...--~PM -~...
- 9/2602
- ---- . . -..-- - -- - -- -- --- - - - -- -- Nozz22Chartl
- ---- - - - -- -- - - -- -- - --- -- - - -- - - -- -- - - - - Page 2 of 2
. .. . . .. . .. . . .. . . . . . .. . . .. . . . . . .. . . .. . . .. . . .. . .. . . . . 4.. . ' . . . . .. ..... .. . .. ..
3 .5 --- i-I*:': I-=- -. 3----.--- 7727 , 3..:.'1 5-6 ----------- --- -------------------------
!~-13..... ----.. -----*
14..1 .. . ... .1 I~~------------ =' ='=1== = p il
--------------- o n il e ac to-----
1-0 ' ... *. 3:58 PM9/26/02.N....22.Chart...Page.2.of.2
I.'- CuW *
.FRAMATOME-ANp NONDESTRUCTIVE EXAMI'NATION PROCEDURE I Remote Ultrasonic Examination Of Reactor Head Penetrations I ~PROCEDURE NO.: 54-IS1-100-09 '
A Fr-A*rame Reactor Head Penetration Amp Ultrasonic Examination Data Sheet Customer: WJ MflC Plant: . . Unit: Penetration No.: TProcedure: 5L1- ,1/- .10-0"* Equipment: Description VH# Cal. Due Date SN# pTomoscan q"-, I ]:L/03 2.o2.gq 16 Channel P/R NA N/.A /, ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3,? &9 3.8 Cable Length: - G Type: I*e.- t-,-q # Intermediate Connectors: I Calibration Block: ,o/l.q3,o6 Calibration Setun: i IA=9C.- Th,3.o/" tcan File z.c,,q-/,P. No.- Az-C.9 -/o.z-&-tW1.1 Scan Start: Z -- o.:-V Scan Start: 0 = -5. G8 Initial Calibration File: Aq-zc,-q ,,o.iq. Z Fin= . lihr
~n Mi"~CC'(Ji ms, . . .. ., , .
INUA.J-w ri~FlAWdf
-JL, Scan Stop: Z = -*. c,/Scan Stop: 0 =
Index Increment: 3. Channeg Angle Serial No. Comments 1 50. 503 7-'Ict4 Results: No Recordable Indication Leak Path Detected Axial laDetured f Circumferential Flaws Detected Comments: AnalRved by: Level: Date: 19 b4 0 Re'viewed by: -Le-vel: -27Date: 1,0/q A l 11-1 TYPICAL DATA SHEET FIGURE 5 Page 31 of 32 a
A I=R AMAT'o IMI1 ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 _ Nozzle: 23 Procedure: 54-1S1-100-09 INozzle Dimensions: (in4 ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 290 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a Axiai.scanazr$sairt. ```*' ai~g.`@1. *1I'-;Stop',I : IdeJ*i--,". -Setub-I, :,= Ch2 n/a Ch7 n/a F~~~W~~s':-,". 1Z~~~ . Ch 3 na ChB / Circ. Scan Start: ]-5deg @1 -0.7 " Stop: 365 Ideg @. 7-961' Setup: 3 Ch4 n/a Ch9 n/a Files: A2269_10.35.11,10.49.58,_11.02.04.11.12 50.11.16 3: Cal Block SIN: 60119300 Ch 5 nla Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI - 2 _A 3 4 6
-7 8
9 110 12 13 14 15 16 17 4~~Z 4_ 9_ _ _ _ _ _ _ _ _
;Data Loc. 290 320 350 00-_ 20 50 80 110 140 170_
200__k-230 260 290 Degrees WELD NOZ. LOC. I 0 30 60 90 120 150 1180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.17 .. 0.17 0.17 0.17 1 0.17 1 0.17 0.17 0.17 0.17 0. 17 0.17 0.17 0.17 Inches MAX. 3.43 3.63 14.12 4.79 5 42 5.73 5.77 5 64 5,26 4.59 3.96 3.56 3 43 Inches MIN. 1.93 2.00 2.54 3 36 4.10 4.63 4.86 4.37 3 76 -3.12 2.42 2.09 1.93 lInches Comments: Measured Thickness: 0 617 @ theta of 3101 deg with an axial position of 5.39 ... L'imited Scan? (YIN):, n I Analyzed by: *_. v loZj.oZDate: qiz t.,,o?. Analyzed by: /i Date: 9/26/024:24 PM Nozz 23 Page 1 of 2
Z10 Z e~ed LiPliD CZ ZZON Z019Z16V'JJ yZ:y uoileDJewep Iflqumoo / llqn PUH *ZON. i ýT SL_ CL 6-1 9 i le 2z OZ
,- 2; 937'"
22 '*42
--- 2----
................ 2
- - - - - 24 222-7'.
7 ------- - 422 44 2 2 2i 2 i--- 2, 2j2 22'.22 4 422' L.4. 2,j 4 2 2.22 412.--- >-
-- - -22' --
2-- -- --- 2--- 2---- 2---- 2.-22*--22.2------ 42'2 22 2
*'2222 2222 2.2 2 WIT 2- 42 ----- - 2 -- ----2: 2 24222 2' 2 4 * - -
.t;221222222 22 2 22 2 2 --------------------
if2'Z .,222t.. 2 HIqUMOG .2 2
------------------ 07~
- 42. 2 22 22 222
'22222 2.22 242 097 2 - 222 2 2222222 b~~~~~~~~~~~~~h~~~~~
~i 1--------------------
ik ii i i6fih~1 h*~ rn a u--nnw - --n n
- n - -------------- u kiliS~.n*.j.n C............----
0*9 9.9 0L
------------------- --- --- 2-- -
- 2. 22 42 ..2 ¶4 222 "2 2 2 2 2
4222-- 2......*.......
--- 2 -- ---
2
..2..
-- - - . 2.. 4.
- --- .-5, -
2222.
- 2--
2 22 *2222h -'Z*4.
-- 2--t--------7-2 0*6
---- -- 2--- 2 2- ------------
.. .. . ---------- -4222... -- - - - 2--
- 2--
- - 2-- - 22 .---- -----2---r-22222 G"6-a 22 2 22 2 2 2- 222222222 2224,22 4 '22*22
----------- 22 ---2224 2 2 2 2 2. 2 2 --
------------------- 2 - 2-- ... 22 ... 2 .... : .. p24 2--
-- Ot 2222 '*1*424. --- 22 22' 2'; ---- 2- 2 2 .144.......-
2' 2 2 .5 2 2ff 2-
-- - - - - - - - 2-
.... f.... 2.222222.. 2 22222 2 '.. 2 "2- -------- '------
-- 2-----
---- ---)
------------ w------ 2--
- - - - 2-2 - - - - 2 22
- - 2---- 2-2-2-----2 - .4-, -----2 2.24227>.
-- - - - -- - - -- - ,222-------- 2-
- -- - -- - - - - - - - 2 2 4-4-4r -'t.-V-t..*
.24----------
2 *22 2222---- 22-- - 0-. .t 2 kk 2'2. 2 22 2, *22 2 22-- 2 2 2----
- ~~~t~~ "NV Vt 4 NaO.LVV4' 5~N~
2 IJOi EZ *2G2I\YZO 1 0
r4r" u.: ru-luu-i, 04-r"-1UU-Z, 3, 4 and 5 h A Reactor Head Penetration FRUA1J ZA MP Ultrasonic Examination Data Sheet 0 Customer: WMC, Plant: P,4-- PeA..k, Unit: Penetration No.: 2V Procedure: 5L/-JS/- IoO0'j Equipment: Description VH# Cal. Due Date SN# jTomoscan " * , /;/0zozq 16 Channel P/R N/A "N/A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEXm Data Analysis Software: Versiorn..-3&- y. r7. Cable Length: S
-' Type: Zs- i'i-q # Intermediate Connectors:
Calibration Block: (,o//9,3o3 / Calibration Setup: Scan File N o.: , = --. - ' .c . , Initial Calibration File: IS-
"/. 4'T.o~, .6. J ,/I./8., &.3T, Final Calibration File:O ,, rzw_u-,nM Cw
- 7.YZ.
31 Scan Start: Z - Scan Start: 0 = -- Scan Stop: Z = 2,Q7,"" Scan Stop: 0 =..ci in ex Increment: 3'
,Channel IAngle Serial No. Comments
/ 5 "o'J. .p , 9 c Results: No/ R cordable Indicationsý Leak Path Detected Axial Flaws Detec -- Circumferential Flaws Detected Comments:
Anal ed by: Level:*, Date: i I Reviewed by: Level: -Date: /.' ! I 4/ TYPICAL DATA SHEET FIGURE 5 I N) ýýVJý7-W Pa=ge 31 of 32
A 1=RA MATO3MI ANI' CRDM Nozzle Ultrasonic Examination Data Shoot Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 -Nozzle: 24 Procedure: 54-IS1-100-09 Nozzle Dimensions: (Ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg,); 320 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a 50b Ch 2na Ch 7 n/a Circ. Scan 2--AMTM __MStart:I AMP -5deg @1 -0.7 Stop: Nozzl 365Ultasni deg @I ExmntoDt 7.961- Setup: 3 he Ch4 n/a Ch9 n/a Files: A2269_15 29.12/15 42.09/15.49.07/_16.38 00 Cal Block SIN: 60119300 ChS n/a ChIO n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max
\_I__
1 NRI _ 2
-3 4 -5 6
8 9 10 11 12 13 14 15 16 3_ _ __ _ _ _ __ 17 Data Loc. 320 350 20 50 80 110 140 170 200 230 260 290 320 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees Noz. End 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.7 0.17 0.17 0.17 Inches PROFILE MAX. 2 80 130 O0 3 66 4.05 4.70 5.00 5 21 5.19 4.75 4.17 3.43 2.96 2 80 Inches MIN. 1.06 11.17 1.47 2.54 3.45 3.96 4.32 3 92 3.30 2.56 1.80 1.29 1 06 Inches Comments: Measured Thickness: 0 65 @*theta of 81 deg with ant axial position of .597 Limited Scan? (YIN): n Analyzed by: eZ.A,, . ,j,.-,,.,,-- "Date: 5? - ;29 -c 7-?. Analyzed by: 'N 1A, Date: 9126/20028:46 PM Nozz 24 Page I of 2
- I'
- '=,: '",' c .RAMATOMEAN. , "; . Nozze 24Profie, ,
15.01, ~ I'* .~P~3/4"t ~ tt 14.0d - . ~ Z 4 L . .. ** 0 "2 ....- -. .,. . -.... ......-... .....
"12.50.... ~~~ - "- ------ - .".....................................
-"... ,.:.".:Z-'-,.. ' , - - * .. . .. .. ; 7 '
10.05 91.5 ...... --. ..... - . . ...........................
. v 10.0. ..
81.5 . ........... :........ ............. .. ....................................... .................. .................
. ...-.--...---............... . I......... ............... ..............-
- ................. ... ] ......... .
9.5.......................-. . ...... ................. ........ ................. ..... ..................... 5.5 6.5 40.0 8.05 -..... 6.0 1.....................
..I........................... ............................
5.S -.. ... .... .... . .. .... ....... . . . ................ ................ ................ ......... .......... ...... ...... ....... .. l........... 5.0....-............--- -.-.-. ... ... ... ... ---..... 5.0 ................. ........................................ ..... ........... .............. ,.. . . ............. ........ ... ..... .... .... 4 .5 . . ......... 4.0 3o5 - o.... - . ..-.-----
-.------- ..-ý- . . ...-- _ .. ...... _.,.. *'* . .. _ ......'_.,......... ......._............... ............. ....... ....... ...............
3.0* .. .. *...... .......... . -. .. .. ... ...... ... . ............. _. ... ..... .......................... ,
"2.50 -"- - - I,- I -.. 7....
. . . . ..,* *... ... .. ,.. I0...... ,,...*...... ....... . * - 200..
2.07 1.0*" * "..
------ . . ..... .-.. .'i* .... '- :*
S-1 -- 2 -3
*,. 5Noz-9 E --- 10 --- 711 S ...- 13 -- ý14 - 15
- '1* -. Noz. End --===- 1 -'=--Unhill I Downhill depmnre;-
8:51 PM9/26/2002 Nozz 24 Chart 1 Page 2 of 2
r-w riu.: rw-luu-1, 04-tPU-1 UU-z, 3, 4 and 5 A Reactor Head Penetration nM A--.A'7%5,V C ustom er: M M'PC P e n e tra tio n N o .: V'.- AM-Ultrasonic Plant: Examination Data Sheet o.,* P ro c e d u re : 5 q - i S / - 3ej- Uhit:
,jj Equipment:
Description VH# Cal. Due Date SN# Tom oscan " "q 9 "11-/0 2-,zzq 16 Channel P/R N /A N A 'IA ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version-35S" 7,'3 16 Cable Length: Type: 1-4 *-q# Intermediate Connectors: I C a li b r a t io n B lo c k : / j"&,o q3 o 6 r C a lib ra t io n S e t u p : S c a n F ile N o .: /7 2* /;.z..S-.
; 4* . ? . / , In it ia l C a li b ra t io n F ile : ;2 ;,26 a'7 0 -1./ 11. -7 ij.Y.?/.o7 4*..'4 '..2D Final Calibration File: z jm uuXi,, 'fe", *,q Scan Start: Z = *. Scan Start: 0= Scan
- Stop: Z = Scan . Stop:
, 0 = JO-r Index Increment: 30 Channel Angle Serial No. Comments Results: jc cordable Indications) Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
/
A nalI e b :wd Level: D ate: -7 -* . tI Reviewed by: Level: . 1 7--Date: /Oc/6 I I STYPICAL DATA SHEET FIGURE 5 fi7N. Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Shpft FRAMATCOMM ANF* Customer: Nuclear Management Corporation Plant: Point Beach " Unit: 1 Nozzle: 25 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 302 End of Noz. (in.): 0.3 Probe Serial No.s: Ch 1 S0379CN Ch 6 n/a
~Sb"~~ ~ ~ ! t~:I ~ld~§I~
~ Sdt~f
~A 1 Ch 2 nIaa
'~- .. Ch 7 -n/a V*M in' Sn/a ____________C3 a
Circ. Scan Start:5 313deg 3-0.34."0Stop: 365 deg @1 7.96' Setup: 3 Ch4 nla Ch9 n/a Files: A2269_12 53 23/13.09.18/13 31 07/1334.20 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI - 2 -3 4
-5 6
7 8
-9 10 11 12 13 14 15 16 17 Data Loc. 302 332 2 32 62 92 122 152 182 212 242 272 302 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 Inches MAX. 309 3.23 361 4.25 4.84 533 557 546 5.13 4.48 3.94 3 34 309 Inches MIN. 1.38 1.52 1.71 2.47 3.30 392 4.23 4.10 350 2283 2.09 1.58 1.38 inches Comments: Measured Thickness: 0 65 @theta of 278 deg with an axial position of 5.13 Limited Scan? (Y/N):1 N Analyzed by: Date: 9-, - Analyzed by: N )P. Date:
I, 9127/200212 32 AM Noz 25 Pige I of 2
"'4. *44 4,.
-; ~~4 '2' ~Nozzle 25 Profile'- ,r"'/
.2' FRAMATOMEANP * '4 .. 4 K - - '4
! "5. "* ' ° t;. ' -' *. ... .... .... .. . . . . . . . . .. . . .. . . . . . . . . . . . . 4..
. .. gJ.- '13,; 0 135 ............................... ........ ................
14.0 . z '..... 13.5 .......
. _22v 13.5 . .... . .. . .........- -... -. .r-
- - -. .. . ..... V4 U phi llk 4' 13.0 .-.-.- ----
i .............. 12.0 .......... .............................. 11.5 ......--....... ..... 11.0 ............... .................. l..... .................. I".......................... 10.5 ..-... ....... .......... t................................ S... ............................ S.... .. . .............. ... 10.0
.......... .............I...........
S............ ii
.... .l......................
7.0. .....-........-. ............-........................... .-.......-................................. 8.50 ..................... ...... -----------------...... ..... ................ ................ I-................... . I-.......------------------------
........ 22 ..-.- ..........
7.5 .... .-. .. .... --- ....................... . . . . ....... ............................ S.................................i S....................... .... ..... S..... . ................ . . 6.0 7.0 -....................
. ..... I-...............................I.......... . . .............. ................................
- ------- I .............................
S............................... .................................. 4.0 ........................-.................... .......... ............... ........ ................................ 4 . ...............................-.. .......... ...... 3.5 4.0 -.---------- -----............. . ... . . . .. . . . . . .. 3.0 ......... .... .----.------.-. -.---.--.- ---- ..-....... ......... .-. . -- ..- . ..................
...... . . .- - Downhill 2.0 ...... Side 1.5 -. i......- ... -"i~ ----- -- ---- i' .. ........ .. .. ... ........ . ........ ......................
0.5 ............... . .. .................- .... . ... 0.0 4:;.V'
-1. ,,0 . .... '1.0
"" 50,....
100
- 1>
150 200 25O - 4300:; 1,: 4,1 ,,,. - . ,' *
-2
-5 -6 -4
-7
- 9 -- 10 -- 11 -- 12
-13 -... ...- 14 -- 15 -16
-Noi- End "---1 "*- Uphill / Downhill demarcation 11:31 PM9/26/2002 Noz 25 Chart I Page 2 of 2
I I rv N.: -1UU-. 04--.-1 U.. - .4 and 5 1 I FT AA Reactor Head Penetration
'Ultrasonic Examination Data Sheet Customer: ' NJ M _-.J Plant: M-- 3,e-,k Unit:
Penetration No.: /Procedure: Equipment: Description VH# Cal. Due Date SN# VTomoscan " ,1/-4103 '-1,9 = ~. 16 Channel nP/R e ACCUSONEXI "vData Acquisition NS/A Software: Version 6.2.5'No CmmA ACCUSONEX'm Data Analysis Software: Version S- ,3. 9 7# Cable Length: - IS ; 0 Type: Ze.- t'4q # Intermediate Connectors:I Calibration Block: "&ol e 73o el Calibration Setup: S ca n F!Ile No.: A,)2"-2,1.. o/. ý2.73" Initial Calibration File: ,f2-* 71- o.- *,06 c-Axa FlZaws Dett.e Final Calibration File: Detecteum pderaffljf* Scan Start: Z -" Z2 Scan Start: e - Scan Stop: Z =rS ,'JScan Stop: 0 =.7*5 Index Increment: 30
-Channel Angle ISerial No. Comments i *o' SO5c.-17
- 0 F
'I SResults: CfNo Recoi_.dble Indicatiý_nt-, Leak Path Detected Axial Flaws Dete*-U--- Circumferential Flaws Detected Comments: 1--e Analyzed by: Level: _L Date: I -? I-oz Reviewed by: Level: -Date: A9 -'. ,. 65 TYPICAL DATA SHEET oc.3 *O-t5°°Z/ FIGURE 5 Page 31 of 32
FRAMATOMG AN'P CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: 26 Procedure: 54-ISI-100-09 INozzle Dimensions: (io,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 59 End of Noz. (In.): 0 Probe Serial No.'s: Ch i S0359NF Ch 6 n/a Axial Scan Start:I -51deg @10 " -Stop: 8.56 Ideg @I 3651 Setup: 4 Ch2 n/a Ch7 n/a Files: A2271_01.32.351A2271 02.08.38 Ch3 n/a ChB n/a W' 4.,- e ,61Ch4 n/a Ch9 n/a
- * -____________, Cal Block SIN: 60119300 ChS n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 NRI 2
3 4 5 6 7
- 8 9
10 11 12 13 14 15 16 17 Data Loc. 59 89 119 149 179 209 239 269 299 329 359 29 59 Degrees WELD Noz. Loc. 0 30 60 90 120 150 ISO 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 .. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 2.83 3.03 13.36 4.01 4.73 5.36 4.21 3.60 3.03 2.83 Inches MIN. 10.77 "0 89 1.20 2.33 3.05 13.94 12.62 11.49 1.03 0.77 Inches Comments: Measured Thickness:1 0 69 teao 33 dewthnaxlpstonf 538 Limited Scan? (YINY I Y 1.7HEMIJAt*, Limited scan between 220 to 301 degrees. 78% complete Analyzed by: tm .- / _. .__ Date: 9.;Z-, 07-O. Analyzed by: .. .. ... i/A Date: 9/29/20028:15 PM Noz 26 Page 1 of 2
,, , t..
.. , " ' No zzle 26 Profile .Q I* FRAMATOMEANP " -
14.5, - .-... ~~ .... '"'S . w. ;:,< , *,,* .i.
.... ........... . . . ...... . .... ... .............. .. . . .... . ... ..... .. o.....
13.5'.. .... - .. ..... .
- .......... ... . ...L..................
.-.- .... -....... ........ -:................................, ..................... ................ .7..-tC....................... ..................... ................ . ......
13.0 ......... ......... ..... ........................... .......................
. ..................................... *I......... -. ..... .................. 1-.............................. ...---,..Z..':.; ......._......... -_ ........ .... 9 ? ~ .~
Slide 12.5 ......................-............. ................................... ................................... ................................. " . I- .. '-.
..... ............S..... ............. . ...I............ ..... ......." . . . ....
12.0 --...-...... .-..................... - - .-....... . . ................................................... -I
......... ...... ............ .. ................ ... .. _..... ......... . .. . . ........... .* .=..'....
11.5 ..........................................................................-.......................... ....... ...... ............................... I"....... ....... ......... .... ...... .................................... 1 1.0 . ................................. ................................... ............................... .... ........................ .......... ...... ................................ S..................................... .......................... - - 10.5 . ......................................................................................................... ........ ...................... .... }..................................... 1 0.0 ...................................... .................................. .................................. * . . ..............
....... ............. .... . . ......... ... . S.................................. ........... ...................
9.5 0................................................................................. 9.0 ...................................... ...................................... ... ......... ...... . . ...... . ... . ........ . ...... ............. S..................................... ............... ..................... 8.5 .. .............. 8.0.0............................................ ...................... ............ 1 ..................................... 6 ...................................... -.............................. ... ...................... ..... ............. .... ............. ..... ..... . ............................... I.................................... 67.0 ........................................................... ? -.......... .. ..................................... ..................................... ..... ............. ................ . .................................. 5.5 ....................................................................................................... ................................... .......
................. S.............................. ..... I......
6.0 . ....................................... ................. ...... .............. ...................................... ...................................... ..........
...... ....................... ... . ... .. .I ...... .........................-.....................
5.0 . -.-............... ...... ..... ........... -------------- --.....-..................... 5.4 ........................... .......... ................. .........................- ....... ..................................... I .................... .. ...... ......t.. .......... .... ....... ... ... ............ 3.5 3.0 T................. ............ ..... ................ !!!; ... ........ 2 ...... .. ....... .... ......................... S................... . *.. ......................... ... . .* . . . .'. ...... ... ...... ....... 2.0 . ,.. ....................... . . .....................
. ............-.......... Downhill Side
-- ---- ---.. .. . o 10.5 .. L .
0.5. A.".""".......,....' .z25.t......................... ... . . . . 1. I I
'.4 b';
9. 9 . 0, """ ' ;" " " '-1'00 150 : ,2 0 0 - 1 250.7,'r 30011 t~~ 56IS; &
"5 , "9 . y
,- . ", ; "; - . " . Degrees,
.,w
-2 -3 °. * ',.
",. :)... ":,*,.,300
. ,. o;* .,-," ,*
8 r;,' 999 -6
-10 '---"11
*7
]
250
! -12 IA tji It{ k1'
'3.. -1 3 14 15 -16 I2fl; Wi ,Noz. End "--1 "-i--Uphill I Downhill demarcation 'V 7:40 AM9/29/2002 Noz 26AxWal Chart 1 Pag6 2 of 2
Iu ru.: ru-1 uu-1, rw ,4-Vu-iUU-Z,3, 4 and 5 Reactor Head Penetration F IX"IME A Ultrasonic Examination Data Sheet Customer: WM.C Plant: Po ,-- 8I,-qe,~.. Unit: Penetration No.: 4Z-- Procedure: 5- ,S/- .. "O E uipment: Description VH# Cal. Due Date SN# gTomoscan ", 99/ -1 , .o-q 16 Channel P/R NZ.A I, NIA -. /1A I ACCUSONEX` Data Acquisition Software: Version 6.2.5 Intermediate Connectors: r-q # ACCUSONEXIM Data0oAnalysis ' Type: k.- Software: Version3! s. P. Cable Length: Calibration Block: "o/Jq3oE/ Calibration Setup: Scan File No.: -. "Initial Calibration File: AZZ2-- o,4. 4-'.o S- I*,lo,.., Final Calibration File: _c.,iurt-.*u rw*rb gr.*.., *. Scan Start: Z=-6.i,' Scan Start: e =- Scan Stop: Z= q? "Scan Stop: 06= W* Index Increment: 30
-Channel Angle Serial No. Comments S~~' qgc o ýs A- l y
12 Results: 1/No Recordable Indications Let. Pah D qoctd Axial Flaws Detected , Circumferential Flaws Detected Comments: Analyzed by: Level: Date: V?/z-Reviewed by: . /Level: I
-Date:
TYPICAL DATA SHEET FIGURE 5 A Z 7. -4Z . vo . ;Z - . 2 -:S 4 1q3 73416 *33 39 13? &, 173 OIL) A Z:-qz 2 :. Li . ac 2 Page 31 of 32
,C,
. Aq ZLG8
A FRAMATOMM CRDM Nozzle Ultrasonic Examination Data Sheet ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 27 Procedure: 54-ISI-100-09 jNozzle Dimensions: (In.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (den.): 0 End of Nz. (in.): 0.17 Probe Serial No.'s: Ch I S0429CN Ch 6 n/a Axla!i a3 "kt.atSt . jIdeg - " Setup:, , Ch2 n/a Ch7 n/a
* :-- , Ch3 n/a Ch8 n/a Circ. Scan Start:[ "5deg @1 -0.7" Stop:I -365 Ideg @1 8.531 Setup:[I Ch4 n/a Ch9 n/a Files: A227205 27.261 05 49 031 _06 06 521 06 21.36 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 12 NRI-..... ,
3 -4 5 6
-7 -8 9
1o 11
`12 13 14 16
_17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Nozo Loc. 30 60 90 120 150 180 210 1240 270 300 330 360 Deglrees PROFILE Noz. End- 0.17 0.17 0.17 0.17 07 0.7 0.17 0.17 10.17 10.17 0.17 0.17 0.17 Inches MAX. 3 67 3.85 4.35 5.00 5.67 6.22 5 62 4 92 13.73 Inches MIN. 1.52 1.57" 2.05 2.98 _ 4.08 4.75 1 4 25 1 3.40 11 1.47 Inches Comments: Measured Thickness: 0 609 @*theta of 290 dea- with an axial position of 1 5 041 Limited Scan? (YIN):l Y H!* l", Limited scan as follows: 174 to 205 degl /211 to 236 degl 1264 to 332 degl I total limitation 124 degl 66 % coveragle Analyzed by: -' D~ate: 1)7 E.*7o i Analyzed by." AJ/ Date: 9/29/029.53 AM Noz 27 Page 1 of 2
44 '44 - - 4.. 4,,, .44.. 4,, 44: ' - .4 4. 4 - 4 44 4 4,
**4*I44 44 44 , 4 '44 44,4*4 44 '1.4 Nozzle 27 pj.?fll 4
44
- 4. 444 4 t,
- 44 44444
.';' .4 AMA1OMANt
- 44. 444.44, *444 K .4 4
.4 .4 444 444 4 S., 4 4 '4 4 44 44 44 '4 14.15 14,0 " . . ." *- -
C44 A*, 4 4
- - ...-- 4444144 -.444
. . .4, 4 '44 4,
---------------- 44 i-------------------
I 44 *4 i r 4 4 .4 r - I
*444.
13.5 °.. ................ 4.................. 13.0 ...... ------------ - .............. " "... 12.5 --------- ------------ ------------------- S...... ..- .* .... :.
......... -12.0 ... ..............
... ii 11.5 - ---------------- Z................. -- -
-------------------- 44.4" .------ 44; *44 11.0 - .------------------.--------------..... ................- - - - ------------------ 4 ,4 4- - -
10.5 -.-- .........--------.------------- ------------------- ------------------- ------------------- S.......... ; .... - :... 10.0 -------------------- ------------- ------------------- ------------------- ---------- U 9.5 -.-- 9.0 8.5 8.0 - 7.5 --------------------- 7.0 --------------------- ----------;I-- ------------------- ------------------- ------------------- 6.5 -------, --------------.................... ------------------- ------------------- 6.0 ----------------------------------- ............. --. ------------------- ................... 5.5 ----------------------------------- ... .............. -------------------- ------------------- 5.0 ,.*. .. . W4lI4,49 UUUJWUMMMUj4U.44 9Wi,4MMD,uiurn,uiJj4 4 4 Pumwflmmmw4 4 vpuuwu.uuuina., 4, 4.5-------------------- .............. ... 4.0 ----------------- ................ ------ ............ 2.1.5 3.0 -----------------
------------------- 4 44--
2.30 ....*-... . . 35 -
-L ----------------
... a,---------------
4 - -4. 44-- DowhhIII 40 2.50'- ... ..
........... 1 -------
100* 150 , 200"'" -,:" 3/4 250 ,,
,Denreaac , -
-2 -3 -4
-7 -8
.4 5 -. 10 11 -- 12 14 -15 ------. 16 K:-
i.-~-13 Noz..End "'=-
-1
" 1 ~""=Uphill I Downhill demarcation 9:51 AM9/29/02 Noz 27 Chart I Page 2 of 2
i -w r4u.: rW-1 UU-1, 04-1-U-1UU-Z, 3, 4 and 5 lkeactor Head Penetration rFRAM, ,TOMM, MPUltrasonic Examination Data Sheet "Customer:., N, MVC Plant: ,-- -k, Unit: Penetration No.: ,78 ! Procedure: 5q- S/- .1oO-'D* Equipment Description VH# Cal. Due Date SN#
ýfTomoscanl "1"'*' "/*-;/03j -o.q 16 Channel PIE N /A N/A.M N
ACCUSONEX*M Data Acquisition Software: Version 6.2.51 ACCUSONEX'm Data Analysis Software: Version 35 .T.B Cable Length:- SO' Type: k6- t-j-q # Intermediate Connectors: Calibration Block: 4/qo~ Calibration Setup:
! (,,o/i'*3o *'1 Block:422-7"2 I Scan File No.:
Calibration -Zo. go. I Scan Start: Z - 0 Scan Start: e =
.'2 Initial'Calibration File:
Scan Stop: Z = 9..r Scan Stop: e = r
,.7J.q Index Increment: 30 Channel Angle Serial No.- Comments St 5" "1. .50 q/0'oC Results: eor able Idications Leak Path Detected C-Axial Flaws Detected Circumferential Flaws Detected Comments: rcr,.*'- ,
/
Analyzed by: Level: Date:,. " Reviewed b :Level: -Date: 1aO.9-cZ--
"6/-TYPICALDATA SHEET FIGURE 5 J? o13Do Page 31 of 32
A D ~i.- 3IL" JII IJacL Customer: . ... ..... Nuclear Management Corporation -. - -* e ..- Plant: Point Beach
**. , ,IIIINIA 311 Unit: 1 Procedure: Nozzle: 28 54-11-100-09 Nozzle Dimensions: (1i.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (del.): 318 End of Noz. (in.): 0 Probe Serial No.s: Ch i S0440CN Ch 6 n/a Ctlr~J! * * * °Settzp!t!u i~t Ch2 iles. :
n/a Ch7 n/a
- ~ g"u "Ch3 n/a Ch8 n/a Circ. Scan Start: 0 deg @~ -5 8.56 deg @
"Stop: 365 Setup: 3 Ch 4 n/a Ch 9 fl/a Files: A227220 40.29 Cal Block SIN: 60119300 Ch 5 Depth n/a Ch 10 n/a End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min MIn Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 NRI 2 A 3
4 5 6 7 8 ' 9 10 11 12 13 14 16 Data Loc. 318 348 18 48 78 108 138 168 198 228 258 288 318 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 MAX. 2.54 2.78 0.00 Inches 3.38 4.04 4.72 2.74 MIN. 0.75 086 1.35 2.54 Inches 2.07 298 086 Comments: 0.75 Inches Measured Thickness: 067 Q theta of 80 deU with an axial position of 6.24 Imlted Scan? (YIN): y Y I' eJ Limitation from 89 to 261 degrees. 52% coverage. Analyzed by: 444r,..* Date: . . -p t- Analyzed by: m Date: W 09-.ro.',v 9/29/200210:16 PM Blank Circ Data Sheet (2) Page I of 2
*1
.4 FRAMAir , o'.'2' :
. .,...Nozzle 28 P'rofile II S.. . ...............................
14.0,~- .................
. .. ........ * *4'~
14.0 .............. 4......... .. ...... .............. ...-..... .........
.,* Uphfl t2:
13.5 . ..... . . .............. ........ .................................. ........ ......... 1 12.5.0. -..........-. . . . ..... ..................................... ....................... ............................................................
........ .. . -. -........... ......... :- ,.. , 1- -7 7 ;
T Si .
,6t .de-:
j4 1 3.0 -----------.-............ ..................................................................... ........... .-- ................... ....... 1 11.0 ............................ . . ................... .................. 10.5.....................................................-.-..-. ................................ . . . . ...................................... . . . . . . .... o.o 0.................................... 10 . .................................................................... 1.05 ........
-.. 9.5..........
.................. 6..............
............. .I .= --
.i ..........
10. 0.0 ............... ..................... I....................::
...................... ........ .. ..........................................................................- iii~ =:=2=-i - .
9.5 ................................................................................... -............................................
.0 .................................................................. . . .... ..........................
85
.5 ...................................
.5.............. ....
7.0 ....................................
- 4. , . ... ................................
................ ................ ..... ..... ................ ... 6.. ......... .... ..........................
4..5.- ... . . .. . . 4 5 ........ ....... . . .. ...... ... ........ ... . . ......... ............ ....
~ ~ ~......
5.0...... ~* i .............. . ............. ........ ....... . .......... '.......... ... . ....................... ........ ......... ..... ................. .. . ....... .. ........ ... ...... ...- :-............ ........ -. . - ...
- =. L . ; *....,
2.0 . .................... .. . ........ .... 2.. .... .......................... 5 .5 .................... . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .... ............... ...... .......
. . . Downhill Side 0.5 1.0 ....... .. .-. 4..... ........
..- 4.A.......
. . ...... ~.....-...
. . . I.............
.............. ....-...... , ..... . ..... 6... .,-, ...
.0.. . .
. . . . . . ..... . ..4 . .. .. -
....... ." . .; 4 ,Z,
-z.t&IV 4-
'y 0 . ".44'i 509' ". 2'100" 150 I 200 250- .,- -, 3009 4.t¶.735Q%,
,., - ~~...*.,.. 4 - 4 .4 6% 61% 4 4
S ...... -2 --- 3 44 913 10 11 12 I,
- --- 14 -16 1. I
"- Noz. End 1'""---'Uphill / Downhill demarcation 2..
4444 N 644$ 10:15 PM9/29/2002 usbladeprobe-Pt.Beachi.xis Chart I Page 2 of 2
"FAMATTOME Customer:
AN13 CRDM Nozzle Ultrasonic Examination Limitation Sheet Nuclear Management Corporation -. lnt oint Beach j*it Nozzle:-'-* , Procedulr...e: 54-ISI-100-09 Nozzle imenion's: (10.) ID: 2.750 OD: 4.00 Thickness._ 0.625 Downhill Side of Nozzle (deg.): 318 End of Noz. (in,): 0 Probe Serial No.'s: Ch 1 S0440CN Ch 6
'Oi" n/a dei- ChVs n/a Ch 7 n/a e*-'1 .14"-'. t. ,~iv
,,*"A .VP, Ch 3 Scan rtO d g 0 n/a Ch8n/a
- :ic
*T @ 3 5 e u : 3 Fls A2272.20 0.29 Ch 4 n/a Ch 9 n/a Cal Block SIN: 60119300 Ch 5 n/a IAcquisition Instructions:Ch0n/ Ch1 /
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred.
For example, current limit activated, probe stalled on upward stroke, rotational I tpe cnwe stall occurred. a ecame to.tgtt scan.
.A ..-
- 2 Scan himie fo frm 9too2d. rees. A'-t'otal of 172 degrees.
8 9 14 10 15 16 17 12 IT-I 14I is II 16I 17 18I 20 21 Acquired By: Date: ;z -. - 9/30/20021:40 AM Noz 28 lim Page I of 2
l-W rvu.: rW-1 UU-I, 04-rL-1 UU-Zt 3, 4 and 5 Reactor Head Penetration "Ultrasonic Examination Data Sheet IPlant: , leAI Unit: Procedure: 5'- isi- o-e* ACCUSONEX' Jm ACCUSONEX "Data Acquisition Data Analysis Software: Version 6.2.5 Software: Version+/- 3*.?,. Cable Length: - Type: Z&/- i,4-q Intermediate Connectors: Calibration Block: & o1yq3o,6r1 'Calibration Setup: Scan File No.: :z2.70_o z- 3-7. 25 Initial Calibration File: A -zz. -o.JQ, Z7
* ., Final Calibration File: *,,nn-7urjrp Scan Start: Z = -. ? Scan Start: e =.S" Scan Stop: Z = x2 "Scan Stop: 6 = 14 Index Increment: 30
/
i J( lI TYPICAL DATA SHEET I FIGURE 5 (bIjslc Page 31 of 32
A -. LIUJI nee Customer: Nuclear Management Corporation .. Rfl M Ir.,.I.n _ a.iU 3.La neet Plant: Point Beach Unit: 1 Nozzle: 29 Procedure: 54-ISI-100-09 INozzle Dimensions: (1h.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (de*J.): 229 End of Noz. (in.): 0.35 Probe Serial No.'s: Ch 1 S0375CN Ch 6 n/a MIA~ de"@ 1 1 td:I Ie@ ŽW 4Setbf ' Ch 2 n/a Ch 7 n/a 4'A "?X~ ~ d~~. ~~ ~ >~4~ Ch 3 n/a Ch 8 Circ. Scan Start:l -5 deg ,-I -0.7 " Stop:, 365 Ideg @ n/a
.521" Setup:[I Ch4 n/a Ch9 n/a Files: A2270.03 07.291A2270_03 33 04 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI ,
2
-3 -4 -5 -6 -7 8
9 10 12 13 14 15 16 17 Dt Lo.29 29 289 319 349 19 49 79 109 139 j169 ...199 229 Degrees' WELD Noz. Loc. 0 30 60 90 120 150 1ISO 210 240 270 -30 30 360 1Deg]rees POIE Noz. End 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.3 0.35 0.35 0.5 nce M. 3 23 3 38 4.35 5.-14 5868 6.13 16.10 5.90 5 32 4.58 3 87 3.31 3.23 Inches
,MIN. 1.23 1.55 2 24 2.96 3861 4 63 14.78 4 8 3.56 2 80 .... 1-91 1-38 1.23 Inches Comments: Measured Thicknes O 7 @heta of 50 deg with an axial position of 1 7.261 Limited Scan? (YIN): N -Analyzed by: ,,/,,*_ 't ."Date: 74_,d 1- Analyzed by: */*Date:
9/27/200211:58 PMNo Noz 29 Page 1 of 2
iN. A',
- 4 ';' FRAMATOME ANP ' " *~~ 4;r' I.- , .,'J', -d S15.0 [: *'j:>. " ' , "
15, 14.501.0-......
- 2t'.
l2 Profile.. . ......
......... : ..... ~ '< ' ".n, .* h S....... ........... .:_.......... :........... ........ . * , ,,;. ,o 13.5 . ......- .............. ...................
13.0 ............ .......... .. ...
.*.. ..... l *,
12.5 .-................. ....-.............. ............-. ............... ............... ... .. ............. ........... ............. ....S........ .......
............................. . : .. ... ,i: * -8r d*'.....
. ... a: ,
12.0 ............................ .... ... 1.5 ........... ........... .................. ............. ........................... .... ........ .......... 11.5 ................................................................. .................. 11.0 . ..... ...... ............... .... ............ ..................... I..... ........ ... ...... ... 10.5 1.............. ................... ..... .................. .......... .................... .....
. .... . ........ .......................S....... .... ........... ......
10.0...... . . ...... ..................... .. 9.5 ......................... . .... .... 9.0 ............................................ . .. ............. 8.5 4 ................................ ... .. .... ....... ........ S................................. I ............................. 8.0 .. .. ........ ...... ..... ... .S.... ...... .......... ..... ... i.... ................ I ..... ... ......... ..... . 7.5 .... .......................... . S............. ..... ........... i... ....... .............. ..... 1"............... ......,"......... S.................. ... ............ I ....................... . .............................. 7.0 ............. .......... ........ . 6.5 .................... ...... ...................... .......... . 6.0 ....... .............. .. ... .. ..: 5.5 ....... ... ............. ....... .. ........ ..... ... .... ..... 5.0 ....... ................. !..... .................. ......... .................. .. . ..... . ..... ....... ........ 4.5 ... . ........................................ 4.0 -- . ....... . .. ........ ý................................ ............ . ...................
............ . 1..................
3.5 ....... ..... . ..... ...... 3.0..... ................ ......................... .. ..... ................ ....... ...... ....... .... . .......... ..... ............... ;................ ............................. ..... 2.5. --- -- ------ ... ..................
..... .................................. ....... ..... ................ .......... . ----- ............. ..... .......... ........................ ...... ... Downhill 2.0 S............... v .............................. ...... .... .....
............................ ',.;'-, t,-,..'-;.......
.*..:..-.-L "-i*.'....,-:
1.0 .... .......... ..... ................................. .... ................. .......... ............................... ..S............................. 6. 0.5 -- .............................. . .. A.......... 0.0, I I r1. I I I I ' 'J'.zz
- ..- t 5, - , 100 150 .. .,200 250: _3oK 300' 5 -6
-2 --
*7 3 4
-9 -- 10 8
-- 11 _-12 'it 13 S..- 14 15 -16 jt
-.--= 1 40' in Noz .End -Uphill I Downhill demarcation I:it."
44
'I 12:11 AM9/28/2002 Noz 29 Chart I Page 2 of 2
I ma r- ,.: rw-luu-l, 4ý-.V-I UO-z,3, 4 and 5 1 I iReactor Head Penetration £ -. FAMATCMr-A " Ultrasonic Examination Data Sheet Customer:. WM Plant: co4- Be*,*-k Unit: Penetration No.: ' Procedure: 5q- ,S/- ioO-D* Equipment: I U*.LCjjpn LvON Cal. Due Date SN# gTomoscan "" .q 16 Channel P/R 2 N/A , N/A ACCUSONEX' M Data Acquisition Software: Version 6.2.5 ACCUSONEX "M Data Analysis Software: Version 3:.-' Cable Length: ot' Type: e- i'1-q / # Intermediate Connectors: I Calibration Block: (,o/2, 3o&7/ Calibration Setup: Scan File No.:.,t 22 2 - ..- /is, sy-.kr Initial Calibration File: 4.2= 7a -127....
". 9. . 4..? Final Calibration File: ,ýO.rrM pz',,,wvcz Scan Start: Z- .0 Scan Start: 0 = -5 Scan Stop: Z = S3", Scan Stop: 0 =X.65 4 4iW^ Il'L,-Chann el I;Anql, I S / ; 650' I ii
'PICAL DATA SHEET t
FIGURE 5 f 9-30 Page 31 of 32
1 Ac CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: 30 Procedure: 54-ISI-100-09 Nozzle Dimensions: (It.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 119 End of NozL (in.): 0 Probe Serial No.s: Ch I S0445CN ChS n/a ________________e_____e___________________________ Ch 32/ Ch7 n/a
'91 -' -. P1Vde @ Ch2 nia ChB n/a Circ. Scan Start: 0Jdeg @1 -5 1 Stop:. 8.56 Ideg @1 3651' Setup: 3 Ch4 n/a Ch9 n/a Files: A2272 18 51.59/..18.59,45/_19.22.33/_19.36 43 Cal Block SIN: 60119300 Ch5 n/a ChI rn/a Depth End Point 1 End Point 2 Axial Adljusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (In.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation MIn Max 1 NRI 2
3 4 6 7 8 9 10 11 12 13 14 16 17 Data Loc. 119 149 179 209 239 269 ...2.99 329 359 29 59 89 119 Degrees WELD Noz, Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0,.00 0.010 0.(10 0.(10 0.00 0.00 0.00 Inches MAX. 2.74 2.78 13.29 4.00 4.79 4.22 3 26 2 88 2.74 jInches M. 0 61 0.78 11.19 1.88 2 93 2.45 1.28 0 66 0 61 lInches Comments: Measured Thickness:1 0 699 theta of 1180 deg with an axial position of 5 341 Limited Scan? (,/,N): Y M,=MR*11[ Limitations from 38 to 47, 86 to 140, 237 to 354. 50% Coverage Analyzed by:__" j ----- Ote: Da 9,a*Oz Analyed by: /9Date: 1 C14" 01 -3o-o7-9/30/20021:32 AM Noz 30 Page I of 2
A 9/30/20021:31 AM Noz 30 lira Page 1 of 2
- 4 S..
44 4 4 44 4 4 Nozzle 30 Proile -. :~ ,* s ~ ,. t.~~
- 4, .4; 4., 4
, FRAMATOME ANP 44 I*.0 , ,.,?4.. , , - 4 4-. 4 4 4!
15.0 -1 1 14.5t 14 ........ 0
- 12. ' ..................................
13.5 - _.-". I.....
...................... .... ..... o.
-~ . - ... *.. ... ...... .. 4 U p~'
13.0 --
... ............. ... .... ............ .......... ....................... o. ... ........ -..............4....... .....
12.5 ......................................... .......... ... 12.0 ....................... .......... ................ ... ............. .... .... .......... ............
.o 11.9 .................................................
10.5 ...................... 19.0 ............. 1 '..
- 9. 0 . ................................... ................... .....
8.5 II I . . . 8 .00 ....... ........................... ........................ ........ .... ................. . .... .......................... 7.5 . . . . . S......... l........................ ......... . ...... 7.0 ........................ . . .
. ......... l .... .......
6.5........... ... .......... ... 6.0 ......................... .. ................. .......................... ............. ........ ................ . ........ ................... ......... ................. ...... S........................ .. ....... 5.5 . ................................ ........... ................. I................. ... ....... .... .... ............. ...... ....... ............... 5.00..........................
................... ......... ........... ............... ..... .......... ...... ... ....................... ............................... I .... ......................
4.5 .......... . .o........... .. ................. .. ............ ......... .................................. ................. 4.0 ............ .- .~~~~n ........ r -.... 3.5 .............. .. .. ... ......... 11il .......
.-------- .-- -I - --- - -- ----. --- -
. ....... i........ ..... .... ... ......
3.0 .... ... 2250
.5 .: ...... ... ..... ............. . .... ............ ............ .......................
............... .. I(.
.... ... .............. S.... ...................... .....................
.......... =............ . .. === .. =====
.==..... .
.................. ...........I...................- ... 4................. ....... ............
Downhill Side 150 - . .. 4 . 1.5 ------------ - ------------ -- ---- 4 ... ..... f .................................. . ................ .......... S... - ----)-[--,----L--':*--: yT--- 0.0 .
-0. .....----O ....
t-................ -.
-I ....................
................I
. 1..........
.(........... .. ......... . .4 ..... ....
4 4 44
.J
~ . 4 0.0 . I + - 4-'
,' 0 ,, :* " .:k,'50 100 150 200 25 300 ,' ,0
'44 %! .4 r.. N¶(.4.. *414;Z
-2 43 4
]
5 4 UK -2 6 -7l
- 9 10
- 11 - '12 'ON*
4 .4 . 13 -.- 14--16 12; - Noz.-End -'--1 iUphill Downhill demarcation 9:07 PM9/29/2002 Noz 30 Chart I Page 2 of 2
6 (Ec ý)/Aje iw rlu.: rW-Iuu-1, 04-tU-1UU-Z, 3, 4 and 5 I SA Reactor Head Penetration
*O*MAM ZtM AM'P Ultrasonic Examination Data Sheet Customer:' NM CIJC. Plant: P, 6eA,,A Unit:
Penetration No.: 3 j Procedure: 5Ls/-S.oO-"o* Equipment: Description VH# Cal. Due Date SN# Tomoscan "1 16 Channel P/R N/A ' N A/,I ACCUSONEX'4 Data Acquisition Software: Version 6.2.5' ACCUSONEX'm Data Analysis Software: Versionq .e& s.Sf Cable Length: SCI Type: Ze/- tý-q # Intermediate Connectors: I Calibration Block: (.o//q3o r1 Calibration Setun: Scan File No.: A9Z?.I*Z-01*.-i;, wt", Initial'Calibration File:ScanF i - oA/.,45, co Final Calihraflnn FiI*. ..s Scan Start: Z = , zo"Scan Start: 0 = -s' Scan Stop: Z = - Scan Stop: E = , Index Increment: 30 IChannel IAncile Serial No.-. Comments
- 5 L 0-10 4' .- ;
IN Results: .No Recordable Indications Leak Path Detected Axial F aws e ec ed Circumferential Flaws Detected Comments: -Analyzedby: b Level' Date: Z'./ -t Reviewed bty: -Level: _Z17Date: /0^'/ 4 Z-.
"TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FPAMATF'rM AINF= Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: -31 Procedure: 54-ISI-100-09 Nozzle Dimensions: (11.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.): 14 End of Noz. (in.): 0 Probe Serial No.'s: Ch i S0429CN Ch 6 n/a Ax ial s &A* n `,- ~a
*, *,S t j. g . , d 691,@ I . 'I i"",' .",S to p . I
, j'*: ".: d ec-, n aC h
______ _____~dY.'QS::ý~ Ch3 n/a Ch7 n/a Clrc. Fies: Scan Start: L A2272_07.07.46 -5deg Stop:1 -365 Cal BlockIdegSIN:
@1 Setup:[93 8.57' 60119300 Ch4 ChS nla n/a Ch9 ChlO nla n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI 2 -3 -4 -5 -6 -7 -8 9
10
-11 12 13 14 15 16 17Data Loc. 14 44 74 104 134 164 ..... 194 1224 254 284 314 344 14 Degrees 120 150 180 210 240 270 300 " 330 360 Degrees WELD Noz. Loc. 0 30 60 90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches PROFILE Noz. End 0.00 0.00 0.00 0.00 4.34 5.11 - Inches MAX. 3 15 3 65 1.49 2.3-5 -3.28 Inches MI1N, 1.13 Comments: Measured Th ickness: 0 651 @ theta of 1251 deg with an axial position of 1 2 471 Limited Scan? (YIN): 7y %,-.*j;*'~
Limi~ted scan as follows: 0 to 10 degj / 120 to 360 degl / total limitation 250 degj 31 %coveragle The downhill side of the weld was located in the limitation region. 14 degj isthe start of the scan.
-I2 __--..( ; Date: /2/o-Analyzed by: /Dae Analyzed by:
cater" &I-a P- 'ý. 9/29/0210.20 AM Noz 31 Page I of 2
Z0Z -e6d 1.1.JetO 1.£ZON Z0I6Z/6V4V 0Z":0L uo1eoiewep IIP.IUMOO I PU3 -ZOf'NM .ým 91. 1.1. 0M 6-U-- £ 9-
£ 9 9.9d 9 9 , I 9' .. "..', 9* 9 9.*;'
- seeji~ea 2> .i90rw',
.4 09 o0z 09M 00 . 9 0
- -- ----1p 00
......... ----------- ------------- i...... ------------------- -------------- ....................
. . . . . . . . .9. . . . . . . . .
..- .... 9*0 vo -------------------- ------------------ ------------------ ---------------
7,- 1
---------- 17------- 07I
------- 7----------- -------------------- ............... 97I 1114UMOCI --------------- ------------------- ------------------- ................... -------- ----
~
~n j ~ ~~ I s ~m w ~n ~ l~
*OTk ia bi - - -- - - ---- - -- - - - i i Ria iu inu ~n u u u m~!au mmm mn ! N-x 1 9. I U I 5 I 1 l' 1 I U 1 u ! u 1 mf 11 W 4IU
*9*9
---------- z-------- .................... .................... *9*9 I- - - - -- -- - -- - - -
- 0L I.................. -------------------
------------------- -0*9
.................... -0'6
------------------- ------------------- ------------------- -9*6 I------------------- ------------------- -------------------
- 0WI Tot0I O*I1 -------------------
------------------------ -----9
-OWII
'kk
- 0 ',
li9id -------------------- ------------------ I -------------------- --------------------
. 1.
',-7 ---------- ......... -------------------
------------------- -- 9
- - - -* G-
- -I--- .... 9--- ....
*O 9 . * % 9 - N 999PjflOJd LCOIZZON
Pl-AAV FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations P NO.: PQ-100-,ROCEDURE NO: 5454-PQ-100-2, 3, 4 and S Reactor Head Penetration F4XVIAXOME ANP Ultrasonic Examination D.ata Sheet Customer: "vMc Plant: ,,.' *, e-A " Unit: I Penetration No.: Procedure: 6'q-1S/-/1,9--
"i Of E ui ment:
Description VH# Cal. Due Date SN# 4Tomoscan ,z7o 71L 3 A0317 16 Channel P/R ACCUSONEX "Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version -TIT Cable Length: 5o0 Tp e: R * # Intermediate Connectors: I Calibration Block: &o//1,3z/01 Calibration Setup: IScan File No.: o,9p 72 /*;*-/. Y3 Initial Calibration File:,q,6*, - /0.-2. 30 Final Calibration File: ... o02" Scan Start: Z = .0 Scan Start: 0 Scan Stop: Z = -yo,'Scan Stop: 0 = Ys-5 Index Increment: 30 Charin I Angle Serial No. Comments Z- 6" - 3zo'-/'
- 3004!. 3 *Zo27* "I.
3 . &,,O% - s5o o
,o'5 350o2.
3 Results: e Leak Path Detected *t. Axýial Flaws Detected Circumferential Flaws Detected Comments: AnalI Date: /e0 -'-0b-eviewed by: Level: Date:
"-'TYPICAL DATA SHEET FIGURE 5 Pace 31 of 32
- 0, R.
A 6 CRDM Nozzle Ulitrasonic- 17Ymminnfinn nflnf Qhnn Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 31 Procedure: 54-ISi-100-09 Nozzle Dimensions: (i,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 49 End of Noz. (in.): 3.22 Probe Serial No.'s: Ch i 35044 Ch 6 35052 lit,_ t -;-". 4$etup:j : -~:rCh2 35202 'Ch 7 n/a Sn, Ch3 Circ. Scan 35070 Ch8 n/a Start:I -51deg @1 0 " Stop: 365 deg @L 2007' Setup: I Ch4 35044 Ch9 n/a Files: A2275_18.04.33 Cal Block SIN: 60119300 ChS 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (In.) (deg.) (in.) Ratio Orientation Mmn Max I N1 2
-3 4
5
-6 -7 -8 9
10 12 13
...14 15 16 17Data Loc. 49 79 109 139 169 199 229 259 289 319 349 19 49 Degrees WELD Noz. Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 3.22 3.22
. 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 Inches MAX. 6.48 6 69 6864 7.15 7.76 8.17 8 83 MIN. 9 29 9 29 9.14 8.73 6.89 6 48 Inches 1 4.29 4.34 4 49 4.80 5 31 5 92 6.69 7.45 7 51 7.15 16 59 4.49 1 4.29 lInches Comments: Measured Thickness: 10 631 @ thet ofl 2891 deg] with an axial position of _10491 Limited Scan? (YIN):l N I Analyzed by: DateF /-av '/%Z_- Analyzed by: A//,A Date:
65'7 1013/022:29 PM Noz 31 rotating Page I of 2
21, "; .- , . -', ,k.
'U'. .. FRAMATOMEANP " I 't", . Z ,,W.'2, 1 ' "-: -. ,, .,. , - ,
" , ,15.0u .~ ' ° o'*" ...*" 4'- ~ -"- ;' ," " " ,... . "-" . , -- -.............
14.0. ..... . ..... . ....... 1 3.5 . ... , . . ................. .. .. ...... . ..... . . .....".. I,': - 1 3.0 - .... .. . . .... . . ...... ....... .... . ... .. -..-... .. . . . . . . ..... .. ... ... ...... ............. . .. ... ,.' 2. :Z . phi. 12 .5 -- . - .... .......... .. . .. . ......... . . . . . . . . ..-.. 12.0 ........................ .... .. .. 11.0 - ... S....... S...............................i S................................ S................................ 10.5 . .............................. i.................................. S................................J 10.0 ......... ......................... 9.5 . ............................... l............................ 9.0 .....................
............................... =7ýý ..........................
8.5 .................... 4-- .............. .............. ............ ..... ............................ mw_-1 - .. ,"' 7.0 ............ ...... 6.5 6.0........... 5.5
............... [........... .............. ......
4.0 .. .........................
.5 ...... ........................... ..................................
4.5 ............-.........-......... . ... .. ......... 3.5 ........................: ............................................. l11 i........1....... !
.I. . . . . . . . . . . . . . . . . . . .
i- .............. ill I ..... bm , 2.5 3.0 3.................. 2.5 ..............
...2 :.......
- ......... I***----
Io.. .... ............... I ..
............I
....................... . I--.--------..------------.----.....
............. 1 S.................................
4............... . . .
......... L-I --- -------
ý I. ..... .
- .i...#.:.
Downhill Side 0.0 -................... ......... ... I.. .. 1.5. 0..;"-, 0.5 "
,2...
~,'.
.....:-..10 Uo*
-I- 4 '
0 ,150 200 2501, , , "
.1 * . ,
-2 -3
-5 -6 -7
- p. -9 -10 -- 11 p -13 -..... . 14 i- Noz. End 15
* ,Uphlll I Downhill demarcation 2:14 AM 10/3/2002 Noz 31 rotating Chart I Page 2 of 2
P o1/LM FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-IS-.100.09 0 PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 "A. *Reactor Head Penetration FRMA", A NP Ultrasonic Ex'amination D~ata Sheet Customer: M-/WC Plant: PoIAM, Be,,wA Unit: Penetration No.: Procedure: "q-l-/ "j Equipment: Description VH# Cal. Due Date SN# gTomoscan /7z. o ;zo3 14 16 Channel P/R W,!1 ACCUSONEX"4 Data Acquisition Software: Version,6.2.5 ACCUSONEXm Data Analysis Software: Version,3- 3.,5 1 Cable Length: 5 O0 Type: RG-'L1-A # Intermediate Connectors: I Calibration Block: 6/I.v/Calibration Setup: A2213- 0.qb. j!r Scan File No.: Initial Calibration File:.Ajj4.2%-4 A M Final Calibration File: , ZZ.... Scan Start: Z = 6.o" Scan Start: 0 = -5 Scan Stop: Z = .2-" Scan Stop: 0 = Index Increment: 30 Chan el Angle Serial No. Comments 11 6- 1- :5 Z 3 v".- 13 5"zo Z * "F.D 3 1., 35070
&eo-g 3 6 okz C4 35052.
Results: No Recordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed*by: , 6.0Date: z Reviewed by: Level: Date: /0/i / -_. TYPICAL DATA SHEET FIGURE 5 IDý\ov1 Page 31 of 32
4= A CRDM Nozzle Ultrasonic Examination Data Sheet F FtALM ATD?ME ALt%1 F3 Customer: Nuclear Management Corporation Plant: Point Beach . Unit: 1 Nozzle: 32 Procedure: 54-iSI-100 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 53 End of Noz. (in.): 3.3 Probe Serial No.'s: Ch 1 35044 Ch 6 35052 Axlal.. * .St... .. ?A ..... .I [',st,, I.' - I. g1 - . P ; ";"Ch2 35202 Ch7 n/a
. ....'-.ý, . . . -.. . Ch3 35070 Ch8 n/a Circ. Scan Start:[ -5deg @I sop1 20.07 Ideg @1 Sto," 365' Setup:I I Ch4 35044 Ch9 n/a Files: A2275_19.01.26 Cal Block SIN: 60119300 ChS 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 OD 058 6.1 131.0 6.5 143.0 0.39 78.0 90.0 0.42 \ 0.57 47 0.05 0.08 Vol 4.2 6.7 2
3 4 5 6 7 \ 8 9 10 12 13 14 15 17 Data Loc.' 53 83 113 143 173 203 233 263 293 '323 353' 23 53 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.30 3.30 13.30 3.30 3.30 13.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 Inches MAX. 6 29 6.29 6 33 6 65 7.23 7.91 8.49 9.07 9 25 8 89 8 42 6.33 6.29 Inches MIN. 3 85 3 88 3.95 4.21 49 .9 6.94 7.63 7.63 7.30 6 62 3.85 3 85 lInches Comments: Measured Tickness:I 0.635 @ theta of 12 e ih an axial position of 9 45 Linmi ted Scan-? (YIN): N In-dication #1 Is located at weld root Classified as a fab indication Analyzed by: * **Date:- /40*/ 7;7- . Analyzed by: 2112T* Date: 10/3/022:18 PM Nozz 32 rotating Page 1 of 2
JO0 SEecd 0 . PL4 BunlePo Z ZZON ZOlClOWMd tZ: UOiieaJewep lli4UMOO I lliqdnm.m.m L pU3 "2ON. 9* 6-
%7 L* 9-
, A ,, ,0 ,
,.9 . . 0. L-_.
A'-- S..... ... ,. ."..... '4.. 0"0 r,-,4,,
- 1.
- - - - - - - .-- ----- ---------- - . , '4 -
4 I , 0*"0
--- --- - - 7
. . f- ... . . .. . . . l......... . . . . .
4,~ --
------------------- I-.. . . .. . . . .' -- -- - ----- ---
III.Uepl0 -------------------- ---------
,IiIquMoo ------
------ -................... - - - ------- -OfU
- Y 9m
------------------- *-------------------- h St
------------------ ----------- -------- OT
----------- ------- ------------------- ------------------- ------------------- ----------------- ...........------- ----------- -------- 0
------------- ---------------- -------- ------------------- ------------------- ----- .. ------------------ ----------- ------- 9L*O 9'97
-------------- -- ------------------- ------------------ ------------------- ------ ----------- ------------------ ----------- -------- 0.9
-------------- - ----------- 9"9
----------- ------- L
...... ----------- -------- - ---------------------- ----------- -------- 0-9 LL
- I 333S4W S I. -r.mmwmw ww"m...--- ----- wwmwmv$,"wwA L
---------- -------- -------- 9OI
-----L -- -- -------------- ]-.. . .. . . .. . .
--------- 0.GI 99
-----------.35----- ----- ------------- -----.. -0 "1,1
- - - - - - --- --- -- - ------ ------------- 9's4
'5. -. - -------------------
4.. ------------------- -- - - -- - ---
-. -- - ---,- 4 .
'4- * ------ ----------- ----.I. ......,-.----.... G'6
--------------- -- -...------..... i- , ,O'l.
--- 4--- -
.'U'7ý
---------- ------ : --- -- *.:. Wet0"#
I POJd WI:£eZZON ,, ONV a*o.vwvivz
,1'5
.5 r *1 44
I re Pu.: r'.i-'UU-1, D4-tLJ-1 UU-Z, 3, 4 and 5 I A "Reactor Head Penetration 1RA4WATME-* A Ultrasonic Examination Data Sheet Customer: WMC Plant: + - I*..Unit: '. Penetration No.: 32- Procedure: 5q- I-/5eO-0D'i [-qUlJJi&lICL, Description VH# Cal. Due Date SN# gTomoscan -1 zo-*q 16 Channel P/R IN /A N1 . /A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX_ Data Analysis Software: Version . Cable Len th: G0 Type: I?&- -4n-q # Intermediate Connectors: I Calibration Block: *(,ol I q3 E/l Calibration Setup: Scan File No.: A 2272- 's- .4a:J Innitial Calibration File: A.~-'.' Fnal Iq~it!'. Calibration File: c,1ý*, v~ PE Oam Scan Start: Z -7' Scan Start: 0= Scan Stop: Z =S7Scan Stop: 0 =-74-r Z73.9j Index Increment: 3-Channel Angle Serial N'- . Comments I 5"0j,. 5o,./*qc:N Results: -ordabl Indi Leak Path Detected
- Ial Flaws Detected Circumferential Flaws Detected Comments:
Reviewed by _ Level-
- Date: /*z/*-_
TYPICAL DATA SHEET FIGURE 5 69-30-02-, Page 31 of 32
R A IAZrcM AN1 CRDM Nozzle Ultrasonic Examination Limitation Sheet Customer: Nuclear Management Corporation IPlant: Point Beach Unit: I Nozzle: 3Z. Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch i Ch 6 n/a O~fare- ~k~ ~~ _____ ' h n/a Ch7 n/ ME1 flva-1 M W ~~'Ch n/a C8n/a Circ. Scan v Start:[0 deg @L._...J" Stop:1/6/oj9_Ideg @I j' Setup: 3 Ch4 n/a Ch9 n/a Files: A7Z.T272 -13, .1I.0.l,*j6 .'ZO. q Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Acquisition Instructions:
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred. For example, current limit activated, probe stalled on upward stroke, rotational stall occurred.
1 -S+opped XC~j ,r 141-370 dy. 4-p 66'n t~ckbl_ -to !T-, vgzsa gtij 2.2' 2 WAS /WUO UIV~hLd 'ro Aecav. A9gri ~W~l ~ T~ p~c j~ r~~ 3 C-V OP ~b WS 4M7cJ-kM'J& <,A) -rM5: /--V 6r -7WL- EyN.E" 4 5 7 9 10
- 11 12 13 14 15 16 17 18 19 20 21 22
-,ired By:e~av 6 9 Date: 91Z) 2-9/2 I PM LinSheet le 1 of 2 F* 'N*,-C4
KC)t4ýý /V 7. FRAMATOME-ANP Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 509i
.A Reactor Head Penetration SFRU IM C- M P Ultrasonic Examination Data Sheet Customer: NMIC Plant: PoT,',.i &*A Unit: I Penetration No.: _T7 Procedure: .
Equipment: Description VH# Cal. Due Date SN# gTomoscan jz.7o T o317F 16 Channel P/R u/A ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3--a'7. IV Cable Length: Sol Type: R.,- 12A # Intermedi~te Connectors: I Calibration Block: "4e// 3DO/I Calibration Setup: Scan File No.: ,,P'2 *I--,.. ,. ' Initial Calibration File: q 22z c- - ,-. 9'. X
-R,* .-
V:.
/"Final Calibration File: Az-7.-_'=ZiZ.. _'7.o-"
Scan Start: Z = c, Scan Start: E =-s- Scan Stop: Z = 20.07 Scan Stop: 6 =.Ti'" Index Increment: 30
-Channel Angle Serial No. Comments 6 ° .35oq 3 - &.05 ss5oo Results: -No-Recordable Indications- Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed b: - Level: Date: lO-2 ;z -e7 Reviewed b :, Level: Date: /O-/'. "* TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
.A CRDM Nozzle Ultrasonic Examination Data Sheet "-.3 Customer: Nuclear Management Corporation Plant:- Point Beach Unit: 1 Nozzle: 4 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 176 End of Noz. (in.): 3.36 Probe Serial No.'s: Ch 1 35044 Ch 6 35052 L110prd; Iý =""~; do ! 1ýtP ~4i 1 Y.'.eg'J. Ch2 35202 Ch7 n/a P5a4 ?V*' ~ J Ch 3 35070 ChB n/a Circ. Scan Start: -51deg @I j" Stop:1 365 Ideg @1 20.07j' Setup: [ Ch4 35044 Ch9 n/a Files: A2275_19.56.05/_20.17.24_20.51.24 Cal Block SIN: 60119300 Ch5 35052 ChI0 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (In.) Ratio Orientation Min Max I NRI 2
3 4 6 7 9 10 11 12 13 14 16 17 o Data Loc. 176 206 236 266 296 326 356 26 56 86 116 146 176 Degrees' WELD Noz.- Loc. 0 30 60 90 120 150 160 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 Inches MAX. 7.04 7.09 7.61 8.34 8.14 7.49 7.09 7.98 8.14 7.73 7.33 7.04 7.04 Inches IMIN. 14 57 4.61 5.30 6.44 5.83 5.14 4.86 5863 6.03 5.55 5,10 4.78 ý4.57 Inches Comments: Measured Thickness!: 0.67 theta of 330 deg with an axial po.sition of 8.881 Limited Scan? (YIN): 1 N 1 Anayzd b :-_7 Date: ,* - ".-Analyzed by: %J4 4* Date:
- 10K* I1AM Niabng t&
IV llbl"%- I of 2
4-c N-~ RAMATNIE AMIP I',;No 1ke33 P. file"fJ - - i ~ hl~:t7
; 145 1T 1----
.... S 1...
11.5 ..... .............
...................-------- --- . . ~r~ .......
.......... .. ... .... - ........ I ..... . ..... ........ .............
.. t -
-...... . -- ~- 1 -------..
.,,*',.125 .............. .. .....- -- .................................. . ..................
... .......... ... ....... ........... .......... . .. ... . .- * .. Uphill
.. A.. 1 ..
................... .......... ....... ... ..... Side 4 .............................. ..... -.......-.................
1 0 ... .... ... ......................... ........ 1095 .---............................. ............................... ................................. 8.0 ............................ ................ ..................... .... .... ............ ... ...... ......... .... ... ..... ....... .. .. .... .... .. .... .................... ........
'11 0 ............. ........ .............. .. .................... ...... ...... ......... .................
10.5 . ........... ................... .................................
. i ............ ............... ....,............. ...... ............ .................. ;...... ....... .. .. .... .... ................
8 ..................................... . . . .I 7.5 ...... .......-.-....... ...... ....... ........... . . ........... ...................... 7.0 ................................... ...................... 6.5 S......................... -- -- ------- ---------- . ...... .... .......... ........... ..... ........ ...... ...... .... ..... ................... ........ ........ .............. ................... ........... ...... 6.0 . 5.5 ............ 5.0 ................ 4.5 ......................... ..... ....... .............. ........... .............. 4.0 -------- ------------------------- .......... .............. ........................ ........... . ............ ................. ..................... ......... ...... ... ... .. ........ ....... -------- --- ....... 3.5 Y S
--- i ________ h t - L 3.0 2.5 _._........................ ........................... ....................
..... ...... f..............
I--- p-Downhill 2.0 'I\.
......... ( ....................
.. . .--- I .................. I... ....... ----- --- - ---..---- ----- - ..-.- I.-.---..-..-
.. . .......-.. .---------....... t7. ........ - ...........................
i-r I j- S ,o u .-. : 150 1o -'200. 259 -300 A0:U 0 350 400
-1 -- 2 -- 3
-5 -6 -4 8
-9 -7
-10 "--11 12
- 13 14 -15
-- =Noz. End m 16
--- 1
" -- Uphiil I Downhill demarcation 2: 2002 Noz 33 Chart 1 .2of 2 VV: 41,
rW Nu.: rW-iuu-, 04-rU-1uu-z, 3, 4 and 5 "A* Reactor Head Penetration PFRA*'- MC P . Ultrasonic Examination Data Sheet Customer: NJrM CI Plant: . &:,-.kUnit: Penetration No.: -- ]Procedure: 5'/- /SI- /oo-o Equipment: Description VH# ' Cal. Due Date SN# gT om oscan "" E T, i.A*' 16 Channel P/R N/A 1N 1A ACCUSONEX Data Acquisition Softwaie: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3-T. Cable Length:- -O TvDr- tPz- n-a !4 1 Calibration Block: (.0/o/1,30E& Calibration Setup: 4 ZZ 2.i14' Scan File No.: Initial Calibration File: A Ve low Final Calibration File: t.,J-r j , Fj-1. Scan Start: Z -. ,7' Scan Start: e= -- Scan Stop: Z = ".S-Scan Stop: e= .7Z.57 2 Index Increment: 30 Channel Angle Serial No.--:ý Comments I 50j.. :5oL-! Scr4* Results: ecordable Indications: Leak Path Detected cted Circumferential Flaws Detected Comments: Analyzed by: Level-! Date: ' 0-. Reviewed b:. Level: Date: lel/*9,-z.._ TYPICAL DATA SHEET ,4 ao9-c,, AZ-1-.2LS 17. 10. FIGURE 5 S- va -Ze-.
- i-. 3jt. ZL Page 31 of 32 17 14.* . 03
- f 5 q. 1.
-- . 7* '*
S A CRDM Nozzle Ultrasonic Examination Data Sheet F R-A M Ar~PA~r-a Mt Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - - Nozzle: . 33 Procedure: 54-ISI-100-09 INozzle Dimensions: Oin.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deig.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch t S0439CN Ch 6 n/a I @ I IdoS1 Setup: I-;-. Ch2 n/a Ch7 n/a Cic cn Sat - e h n/a ChS n/a Cir_. Scan Sjart:l jdeg @1 -0.7 I" Stop:I -365 jdeg @1 856i" Setup:[3 Ch4 n/a Ch9 n/a Files: A2272_15.10 021_15.16.06/_15.2828/_15.34 26, Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (ID/OD) Flaw TIp (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI *.m il i S2 ' 3 4 6 7 ; 8 9 10 11 12 13
...14 15 16 17
~~~~ 0 Data 5Loc. 30 160 ~
90 ~ 120 150 180 0____ 9___
. 210 1240 270 1300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 1240 270 300 1330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 10.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. Inches MIN. Inches Comments: Measured Thickness: 0 624 thet of 126 deal with an a-'a poiino 6 Lmited Scan? (YIN): y*l~
Limited scan as follows: 0 to 5 deg /199 to 118 degj / 134 to 360 degl / total limitation 254 degl. Axtal limitation is located between nozzle end and weld toe. 3 %coverage The downhill side of the weld was located in the limitation region. 4Date: Analyzed by: 9 /*. I 7 - Analyzed by: o4 1,4 Date: 9/29/028:33 PM Noz 33 Page I of 2
'A ARf.7lVt l.
CRDM Nozzle Ultrasonic Examination Limitation Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 33 Procedure: 54-1S1-100-09 Nozzle Dimensions: (1n.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.): 0 End of Noz. (In.): 0.17 Probe Serial No.s: Ch I Ch n/a Y`4
.F%14. N N~____ Ch 2Sn/a nla Ch Ch77 n/a
~~.i'iiR Ch 3 Cire. Scan Start: ._Jdeg @1L_ " Stop:l!35.,//Ideg @1 [ " Setup:1 3 Ch4 n/a Ch n/a Files: A.Lzz. o315. lt.-
1.i0.3o /M*.ZY.**' I.*/ dji.Cal Block SIN: 60119300 Ch 5 nla Ch 10 nla Acquisition Instructiohs:
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred. For example, current limit activatd, probe stalled on upward stroke, rotational stall occurred.
1 -5+.vVC=b -A,V £-JO-MN Ate~ ,*,eA1" 7t, -, vHT " Aýýa -yir4,jf "iTPJ de'rTjecv.;- ud Q. ,*-" 2 ="-RH r- /-MeWn A)07 /IILG- '-,Q &5 5CNVer) 7--73 "4 -AA) 10off - //9" ,-W Tkle-SC CflA5 4 5 67 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Acquired By: *a *..*h * ..* B* "*. "[* Date: o Z-9129/0212.21 PM Limitation Sheet Page 1 of 2
ko1L47AJ FRAMATO ME-ANP N'ONDESTRUCTIVE EXAMfNATION~ PRoc.=rlp*= Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-41S-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A'Reactor Head Penetration
,FMAATIOMAIUL Ultrasonic Examination Data Sheet Customer: "MJrC Plant: Po, Bew-A I Unit:
Penetration No.: 3q Procedure: 6-q-/Is/-6-aOf Equipment: Description VH# Cal. Due Date SN# LLTomoscan -/7o -2L1 7" 3 ;Zo31: 16 Channel P/R ,,, /N ACCUSONEX` Data Acquisition Software: Version 6.2.5 ACCUSONEX" Data Analysis Software: Version.-%315"* 3. 1 Cable Length: 5 o0 Type: lZ.,- A # lntermedi~te Connectors: I Calibration Block: (.// 3VD0/ Calibration Setup: 3" Scan File No.: Initial Calibration File: A ZZ(,.Z- 0. Z6. 30 A2 z &'.5-//. o(.-30 Final Calibration File: A -L.r. 6s'.)1.7 Scan Start: Z =o.. c-/ Scan Start: 6 = 0.O Scan Stop: Z = I/5"j Scan Stop: 8= 3*5 Index Increment: 30 I Channel I Angle I Serial No. Comments I Cm nts w 1 J 1L --2 , 0 -
->/
1 7- 1 30,11- 1 352.oz I -r D 3 & 0"-1-357 5" (.,f 3 o5.7 Results: ('No Recordable Indications Leak Path Detected Axial Faws Detec eCircumferential Flaws Detected Comments:
-7Ai "v AW ~-'/
M.11-r 00;-W~
- 4. POAaA,% - "
Analyzed by: Level: Date: /0/3/ -z IReviewed by: 4ý2 . el*2 Level: 2ZYý Date: /// 0 -z-TYPICAL DATA SHEET FIGURE 5 vA0;0 I~V Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Ilafa 5Rh*A Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 34 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 118 End of Noz. (in.): 4.06 Probe Serial No.'s: Chli i tti". 4i* de _ _, tujI *.* *, Ch 2 35044 35202 Ch 6 Ch7 35052 n/a
.. .. ,., .~. . . , Cb 3 35070 ChB n/a Circ. Scan Start:I -51deg @1 0.47 " Stop:I 365 Ideg @1 15.141' Setup: 1 Ch4 35044 Ch9 n/a Files: A2265_11.06.30 Cal Block SIN: 60119300 Ch5 35052
- Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (In.) Ratio Orientation Min Max I NRI 2
3 4 5 6 7
- 8--_ _ _
9 10 , 11 12 13 14 15 17 Data Loc. 118 148 178 208 238 268 298 328 358 28 58 88 118 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 MAX. 7.36 7.66 8.29 9.26 10.24 4.06 Inches 10.00 10.31 10.54 11.00 941 8.37 7.66 7.36 Inches MIN. 5.00 5.11 5.45 6.68 8.55 8.25 8.52 8 89 9.45 7.09 5.71 526 5.00 Inches Comments: Measured Thickness: 0.65 A thetaof 112 deg with an axial position of 1481 Limited Scan? (YIN): n
- Need To review the fabrication drawings for repair areas. Locations above compound weld area has rectangular dropout. Possible remant from repair region S/', Date: 3o _ no Analyzed by: Date:
iPm 4 1 of 2
6k.
- I FRAMATO'E ANP Nozzi6 34 Profile (rescan):. - F,'
* - -- .7.
15.0 - r
+/- F
'2
- r 14.5 . ..---------
.. .. -------------------. ------------------- ------------------ 1/4F 14.0. r-------------"....
r ....
------------------- ------------------ 4---2............. --------- ; .... ..*. - F 13.5 7 -------------------; -------------------. ------------------ ------------------
13.0' ------- --- --- -- -------------------. ------------------- ------------------ J---: . . . . . . -----
' I...
F 7 jF k' 12.5 12.0 --------------------- 11.5 r------------------- t-------------------
-- 2J_:...
<g5X Uphilit
,SIdb-g.
-. F FF 11.0 -- -- ------------------
10.5 ------------------ -- 10.0 ------------------ ----- 9.5 ---------- 9.0 -- ------- -- -------------------- 8.5
...... t ----
7--- j ~~n S........... PWJP.~flF~~fAFJIFm-i~Fi I ...... FIFVF~PMNij.i~iII
------------------ ýk rtFnJFJe~JJF
--- I FFJ I
I I'!"! 8.0 ------------------ ----- -- -------------- ------------------- ---------------- ------------------- -- ------------- e- 7.5 ------------------ --------- %r - ----- ............ 7.0 ------------------ ------------------ ------------------ ------- ----------- ------------------- 6.5 ------------------ 6.0 ------------------ ---------- -------- I------------------ ------------------ ------------------ ---------------- - ------------------- 5.5 ------------------- ------------------- -------------------- ------------------ --------------- 5.0 ------------------- ------------------- ------------------ ------------------- ------------------ 4.5 -------------------- -------------------- ------------------- ------------ ------ 4.0 - 1 1 1 3.5 ------------------ ------------------ ------------------ ------------- 3.0 --------- I---------ý:- ----------- I------- ------------------- 7' 2.5 ------------------------- -------------------- ------------------ --------------------- Downhill 2.0 ------- 7------------: -------------------- ------------------- *. --------- .
- -7
-, " f Side, 7--------
1.5 --- ------ ----------- ---- - - - - - ---- --------- -.-
--... ------------ i ----- - - -- - - - -- -- -
1.0 --------------------- ------------------ ------------------ : ------ ------
---------- . "-------- --- .. . .. . ... ----- 7, 0.5 --------- ................... ._ , ---------- 77, 0.0'
-0 50*~~
3/40:- .150,"., 200'
'250 "300." > 356 Dogrees
-2 --- 3 -4
-m 5 -6 7 -8
, 9 -- 10 -- 11 --- S.1.1612
- 13 - 14 15
'-- Noz. End . .,*ta I "'= Uphill I Downhill demarcation A
2:02 PM9/22/02 Nozzle 34 rescan Chart 1 Page 2 of 2
i I I AOY*LA7ýV FRAMATOME-ANP Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-iSI-100-09, PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5
.A Reactor Head Penetration MZU4AO-M:. AMP Ultrasonic Examination Data Sheet Customer: /,mc Plant: Fou,,., BS a Unit: I Penetration No.: _p , Procedure: gel- /S/- /00- -Of Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan fz- - 7 o.3 Ao313 16 Channel PIR N 1A ACCUSONFX'm Data Acquisition Software: Version,6.2.5
.CCUSONEX "Data Analysis Software: Version 3-_5- ?- , 6" Cable Length: 5O1 Type: f(.,- 1+A # lntermediate Connectors: I Calibration Block: 6o//93DO/ Calibration Setup:
Scan File No.: 4'24 ooS/-*2? Initial Calibration File:2z.,_.zs'.? 4 ;2Z6 ' /. o.' Final Calibration File: A .- t. -_os-. if.77 Scan Start: Z = ! 97> Scan Start: 0= -- Scan Stop: Z = l.Y' " Scan Stop: = .. J' Index Increment: 30 Chanipel Anqle Serial No. Comments
.3 C>'1.- "5 z5o z - FL>-
3 &Os 3-50?o 005 3So5 2 Results: QNqo Recordable Indications Leak Path Detected / Axial Flaws Detected Circumferential Flaws Detected Comments: , _ ,- , , , , I; 1 g.r" 6'TYPICAL DATA SHEET FIGURE 5 )ýA Page 31 of 32
A UJdLd *,.IIUCI. Customer: Nuclear Management Corporation
*,*r -
Plant:
-*.,II*i..I
* .t, .lg Il U'*l' Point Beach*
.oc-A lIEIIIIaLIUJII Unit: 1 Nozzle: 35 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: - 0.625 Downhill Side of Nozzle (deg.): 196 End of Noz. (in.): 3.94 Ch 1 35044 Ch 6 35052 AxiSanla I ' Ideg deg. ,:, I;, Sto:., . Cet 3520 h7 na!1, SCh3 35070 Ch7 n/a Circ. Scan Start:[ - deg @1 47 Stop:I 365 Ideg @1 19' Setup:l 1 Ch4 35044 Ch9 n/a Files: A2266_00.48.29/A2266_01.31.03 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (In.) (deg.)
.. (in.) Ratio Orientation Min Max I NRI 3
5 4 5 6 7 8 9 10 12 13 14 15 16 17 Data Loc. 196 226 256 286 316 346 16 46 76 106 136 166 196 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 Inches MAX. 7.35 7.64 809 9.00 10 02 1071 1097 10.93 1023 933 8.42 7.72 7.35 MIN. 4.97 5.13 575 Inches 6.76 8.10 8.96 933 9.12 8.50 7.19 583 5.22 4.97 Inches Comments: Measured Thickness: 063 @theta of 105 deg with an axial position of 11.481 Limited Scan? (Y/N): N Analyzed by: , Date: 9-- 720 - Analyzed by: AJ /4 Date: 9/23/029,33 AM 9/2/02.33AMNozzle 35 Page I of 2 Page 1of 2-
Z Jo Z a6ed I, Mo43 SE IlZZON WO/f2IGV'V WS6 uoieoJewep Il!qUM*OG / ll!qdnflunn,.i pUBJ'ZONfJ.... K. - VV 9- 6-
-LI' I ---- 9 I 1
- - -- - - --- ------------' - -- - - " 9 0 VV-VpFV,V :'4t
- -- &;;...,.7...o] ..
... ,- ; .- . . .-4V.s .. .. .. os_.!
.... - .- -. ..- .- .-- . . .. .- . - . - . ---- .. . . . . -.. OSL, -.- --. ------ - - - ---- -." .....
0"p
---------- V----- -- ------------------
Il V' VVOV ----------- V --------- ------ *V*
--------------------------------------- ----------------------- 7-----
0"9' jot OTA V------------
... ... ... ........... ..... ........ ........- O'-/I.
V 9-. VVVtV V VV 4
*V.'VVV2V.'VV\.VJV 3*
i:.: opi *e
' *, . VV . ..Vt- "V.. . .. .. . .. 0" V:V,, , " VVV; V.".-V'V: V .V V. V '°
- dNV3V~~~IOVVM Vt 2.tt A.'
(
kOIZVIV7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE
)Remote Ultrasonic Examination Of Reactor H-ead Penetrations I PROCEDURE NO.: 54-IS1-1oo-09o PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
.*Reactor Head Penetration F=*A*,vIATO?.'!AMP Ultrasonic Examination Data Sheet Customer: NMC Plant: Po,,,,,,A Ie..,
Unit: Penetration No.: 3(0 Procedure: 6yqj'.-1,-4i-O90 Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -/z.7 o .,o3 16 Channel P/R A-'M ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX mData Analysis Software: Versioný S-3. Cable Length: 5So Type: R.,- 3-ý # Intermediate Connectors: I Calibration Block: "6opil3D0/ Calibration Setup: 4Z*;-,Z,. g. Scan File No.: Initial Calibration File: A g
,4 7 (z* ".2 *5- 5 Final Calibration File: AnZs% 6 - oi-.. .37 Scan Start: Z = 0 .'q7 Scan Start: 0 = -5 Scan Stop: Z = I' Scan Stop: 8 St,7 Index Increment: 30 Chanr*! IAngle Serial No. Comments Z "1-1 -. 5 .o 2. -oF= D 3
,q
- &Os vz.I'g-35oO s so qt To dOse 3oC', .
Results: No Ecordable Indications Leak Path Detected I. Ax-mae Flaws Detected Circumferential Flaws Detected Comments: Analyzed-by: Level: Date: 9 ZZ'6, Reviewed by: .Level: 4iL Date: 16/K _ I,/ - I-.- - TYPICAL DATA SHEET FIGURE 5 jP *,- 23-l-- Page 31 of 32
0 FRAMATOM Customer: nmý ANI= Nuclear Management Corporation C....N... l. *UltrUnn V F~mglln, el I *i Plant: Point Beach fUluL Unit: 1 Nozzle: 36 Procedure: 54-ISI-100-09 INozzle Dimensions: (fh.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dedj.): 350 End of Noz. (in.): 3.9 Probe Serial No.'s: Ch i 35044 Ch6 35052 Axial Sc~anL., t" .. ,= , __-_,___- _d_____:-top. . _Setup: Ch2 35202 Ch7 n Files. , " - ' . .. *" -" -' ., ' - , Ch Circ. Scan Start: ..-5Jdeg @ 0.47
,9" Stop:I 365 Ideg @1
- Ch3 35070 Ch8 n/a 1s[ Setup:[- 1 Ch4 35044 Ch9 n/a Files: - A226517.52.55 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 2
-3 4 -5 -6 -713 __,_ ____._ ___,\ - .. _ _ _ __ _ _ _ _ ,__
8 9 10 11 12 13 14 15 16 17 Data Loc. 350 20 50 80 110 140 170 200 230 260 290 320 350 Degrees WELD No. oc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3 90 3.90 3.90 3.90 3.90 Inches MAX. 6.74 892 892 9.41 1000 1037 10.44 1013 916 8.13 7.27 6.70 MIN. 6.74 inches 4.45 7.09 7.12 7.71 8.35 883 8 83 840 7.38 6.13 5.11 4 56 4.45 Comments: Measured Thickness:I inches 0 63 @ theta of 93 deg with an axial position of 10 3 Limited Scan? (YIN): n I Analyzed by: Date: 717- 7o, Analyzed by: Al/A Date: C-, i 9/22/027:58 PM Nozzle 36 Page I of 2
AW,
+: . t+-' .4141 3/4:- it- -' '3-6 P~ ro Id '
FRAMATOME ANIP , .- , -' I 105' 14.5w
+;..*.':..: .:_% ,. .*........... ...................
14.0, 13.5 13.0 12.5 ------------------
-------- 4--- ---- L .......... .
12.0, --- - -- - -4 -- - - - -- - - [EE t,1,11 ,-
------------------ -,. ................... ......... I -----
11.5 11.0 10.5 46 h' .S - 10.0 ......-.- -------------------- 9.5 --------------------- ---------------
------------- L-----
9.0 .............. --- ----------- 8.5 ---------- ---um oat" UVIMA Q SUM
' 8.0 ------- ------------- ----------------- -- - - - - - - -- - - -- - - - - - - - - -- - - - - - - - - -- - - - - - -- - - - - - - - - -- - - -- - - - - -- -- - - - - - - -- -- - - - - - - - - - - - - -- - - - - - - -
7.5 - -- - - - - -- - - - - - - - -- - ---------- ------ ------------------- ------------------- ------------- -- - - - -- - - - - -- - - -- - - - - - --- - - - - - - - - - - - - - -- - - - - - - 7.0 .. ......... ................. H --------- ------------------- ------------------- ------------------- ------------ 6.5 --------- ------------------------------ ------------------- ------------------- ------------------- --- -------------------------------------- 6.0 ------- --------------------------------- ------------------- ------------------- ------------------- -------- --------- ----------------------- 5.5 ----- ----------------------------------- ------------------- ------------------- ------------------- -------------- --- ------------------- -- 5.0 --- 4.5 4.0
- ..:--,-7 j-----------
L 3.5 -. --I - - - - - - - 3.0 --------------
-- --- L----
4- 'Downhill 2.5 ------------------ -------------
-c Slde-
.......... 1
.1 2.0 S --------
K-..' . .*+.. . -'.'
------------------- -- ---- -- -- - tV' ,
"4.',5 7 -o
-- ---- - ' ----.-- '-1,
*'. '1...+_. . ,,.' .
* - -u%
'4 -?0,. --------- I-- TOO " ., 4 0 0 ' .'. 4,. 4 4 eJ i' 4 - .. ' 4 ~t
-,' ,+1:
14
!--- .5 -6
-3 7
"9 10 11
'13 -...- 14 15 m-f-""Uphill / Downhill demarcation Noz. End 1
11:15 AM9/29/02 Nozzle 36 Chart 1 Page 2 of 2
I P0,11AAN? FRAMATOME.ANP NONDESTRUCTiVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations NO PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 4 Reactor Head Penetration FP4kUA-T E ANP Ultrasonic Exarfiination Data Sheet Customer: Ntwc Plant: Pwvr, B..A 1 Unit: I Penetration No.: Procedure: </2/-/ .- 9 Equipment: Description VH# Cal. Due Date SN# gTomoscan $vI -z7o3 16 ChannelP/R 1 0A i -s/A "/A ACCUSONEX" Data Acquisition Software: Version Q.2.5 ACCUSONEX'm Data Analysis Software: Version .3q-0 (9 . Cable Length: 560 Type: lZG +A # Intermediate Connectors: I Calibration Block: 4NI/I3DO/ Calibration Setup: 1Scan File No.: Azz&.- . Initial Calibration File: q}ZZ,,z- /b.;S.3O Final Calibration File: A- 2-zX6-o.-s' ). .7 Scan Start: Z= 0q.wl"Scan Start: e=-I5 Scan Stop: Z I'V"Scan Stop: a 3(. r Index Increment: 30 ChanrnI Angle Serial No. Comments 1 6" /. Z 3*O0I- 135z2oZ TOFD 3 &-SO -35 o70
" .d5*- 3 orz 50 52.
36 Results: -Ilo Recordable Indications, Leak Path Detected
-- ial Flaws Detected Circumferential Flaws Detected "Comments:
Analyzed by: evel: Date: 9 LZ
-Reviewed by 4- Levelr' -- / Date: 6'/~~
TYPICAL DATA SHEET (k 6 ,,1-3b. v FIGURE 5 PFage 31 of 32
-'I A
Customer: Nuclear Management Corporation ..... S. flMI .. l ssa. Plant: Point Beach c .u L..AcIIEEI
-U EULIUII
".-a. U" L LJOLO Unit: 1
.JiiL Nozzle: 37 Procedure: 54-ISI-100-09 INozzle Dimensions: (4n.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (degl.): 0 End of Noz. (in.): 3.83 Probe Serial No.s: Ch 1 35044 Ch 6 35052 Axial Scan' -.Start:l. deg..l@Its, -. , - Ideg, @[ " , ',Setup:lL Ch27 h n/a Flies:' . . . . .- ,. , -h . .... ch3 35070 Ch B n/a Circ. Scan Start: =J5deg @ 0.47 " Stop:I 365 Ideg @I "9. Setup:[ I Ch4 35044 Ch9 n/a Files: A226514.03.14 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 nl/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 2
3 4 6
-7 9
10 11 12 13 14
'15 16 17 Data Loc. 0 30 60 90 120 150 180 210 240 270- '300 330 360 Degrees WELD Noz, Loc. 0 30 60 90 120 150) 180 2:10 240 270 300 330 360 Degrees PROFILE Noz. End 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.93 3.83 Inches MAX. 7.60 9.35 9 54 9.73 10 21 10 54 11.11 11.00 10.64 9 74 8.78 8.02 7.60 inches MIN. 5.41 7.12 7.17 7.69 8 07 8.55 19.35 9 35 8.74 7.60 1646 5 89 H .41 lInches Comments: Measured Thickness:; 0 63 @ thet of 1 2121 deg!with an axial position of 13 28 Limited S'can__(Y/N): n I.Analyzed by: r--"Date: t? /ZZ../a.Z Analyzed by: ,j,, Date:
6' 9/221024 08 PM Nozzle 37 Page I of 2
V'.' Nozzle 37 Pir'ofile ~ FRAMA-TOMrE ANP Il 14.5 ---.- ------'--- _;_ --... 14.0 -----........... I t 13.5 ------- -------. .. 1---- ---------- ---------.... ------------------ 13.0 ----- - - - ---- -- -- - - - -. ------------------ ------------------ ------------------ ---------------- U hill c,' 12.5 - ------------------..
------------------ ------------------ Side',
iiiiiiiiiiiIiiii 12.0 -- 11.0 -------------------- ii 11.5 -- -- - - - - -- - - - -- - - - - -. -------------------
--------------- W--
- W..................
10.5 ------- ------ ------- ------------------ --- 10.0 ------ ---------- I'll ----- -------- 9.5 ~ 9.0
.ma"MIUM11"lmMUMmo
----- ---------- ---------------- ------------------ZZI ----
4~C~~4 - S........................
.u4mL,~4j4~u. b,.4.i
.,'~..,.,..
......... *lqq*qq*U*
U N*]iEIN*UmmU*M* WOMOMMUqý U] Im 8.5 --------- W-- ------------------ --------------- ------------------ ------- - -- U- .. ------------------ . 8.0 -- --------------- ------------------ -L ------------------ ------------------ U 7.5 ------------------- ---------- ----- ------------------ ------------------ ------------------ Ný- ----------- 7.0 ---------- ------- -------- --------- ------------------ ------------------ ------------------ -------- -------- ------------------- 6.5 ----- ------------------ ------------------ ------------------ ------------------ ------------- ---- 6.0 ----------------- ------------------ ------------------ ------------------- ------------------ ------------------ :ýý 5.5 -------------------- ----- w------------- ------------------- ------------------- ------------------ ------------------ 5.0 ------------------- ------------------- 4.5 - -------------------- r------------------- t------------------- 4------------------- ------------------- 4.0 -------------------- ----------------------- -------- w------- --------------- -------- - - --------------------------- ---- - --- *1---
- 3.5 ...................................... ---... - ------------...
3.0 -- - - - - - - - -- - - - - - - - - --- - 2.5 ------- ----------------- Downhill 2.0 -- - ----------- - -------------- ------------------ Side 1.5 -----
..---.-.. . --------------- ------------- W 1.0 - ---- -- :- .. ---- ---.. ------.
.. ----- ----------- --.. -------- ------ t. '4 ,'
0.5 ------------- -- ---------------- ---------- --------- -------------------- 2- -. 0.0 . f -t
, 00 . . ... ,~, 0 . . . , " 100 150 200 250,'-- 300-Degrees
-2
*7
-4
-6 -8
-9 -10 U- 11 --
-13 14 15 S..1612
- -Noz. End .,saa.a1 """"l H " Uphill Downhill demarcation 4:08 PM9/22/02 Nozzle 37 Chart 1 Page 2 of 2
c'gC FRAMATOME-ANP riut-'ItuLIvJ u.XzAMI TUrN PRUOEDUURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-1So-I 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration rR.4Aut= mAAmP Ultrasonic Examination Data Sheet Customer: W MY*C Plant: )e,.k
-,e Unit:
Penetration No.: ?g Procedure: 5/- is,-./oO-i Equipment: Description VH# Cal. Due Date SN#
.Tomoscan &/*./o3 qo14q 16 Channel P/R N /A NI,AA ACCUSONEX"" Data Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version .
Cable Length: Go' Type: /.- ;,-q # Intermediate Connectors: I Calibration Block: (.o/J13oe/ Calibration Setup:
'Scan File No.: 7:,; 7, *7i ,- . Initial Calibration File:4,'2C&_/I. 2 *. 99 Final Calibration File: c o,..riwivCt prrz-mHA Scan Start: Z = - " Scan Start: 0= -s- Scan Stop: Z = S*.5 Scan Stop: 0 =..° Index Increment: 30 ChannlI An le Serial No. Comments Results: <o-Recnrrfnhl. Indi pn~ss Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
MAnnalyzed by: * .... __Level: 72ý Date: *. ,'-*-. ,Reviewed by: Leve TYPICAL DATA SHEET b FIGURE 5 Page 31 of 32
Ack CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 38 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 36 End of Noz. (in.): 0.43 Probe Serial No~s: Ch I S0420CN Ch 6 nla Scanl.. ~~.. Axial S.... ,.
;t,ý Start:I-,, ',d .,. I.sop; ,."Ideg @ '%...t" Setup: I Ch2 n/a Ch7 -n/a
~ . \ : ~~ u.. ~ .. ~Ch3 n/a C8n/
Circ. Scan Start: deg @L-5 -07 " Stop:I 365 Ideg @1 5.98' Setup: 3 Ch4 n/a Ch9 n/a Files: __ deg_@___ ___ Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface10C to Min Min Max Max DM__ Nozzle_ TotalUltrasoni Min Max Examination Total Length DataShee Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI._ 2 3 4 5 6 7 8
-9 10 11 12 13 14 16 17Data Loc. 36 66 196 126 156 186 216 246 276 306 336 6 ,36 Degrees WED Noz, Loc. 0 30 60 90 120 ISO5 180 210 1240 270 300 330 360 Degrees PROFLD by:_______Noz. End Anlye 0.43 0.43 0.43 0.43 0.43 10.43 0.43 0,43 0,43 0.43 0.431 0.43 0.43 Inches POIE MAX. 3.12 3.15 3 29 3.44 3 68 3 82 3 87 3.84 3 71 3 47 3 26 13.18 3.12 Inches MItN. 1.81 1.93 2.06 2.31 2.47 2 .59 2.7'0 2.62 2.41 2.17 2 00 11.90 1.81 Inches Comments: Measured Thickness: 10.63 theta of 191 deglwith an axial position of 4. iited Scan? (YIN): N Analyzeby ,*"J* P Da te:T ,- -,70 2-.- Analyzed by: i- Date:
/ t4 01.2q.0-L Noz 38 P5age 1 of 2 9/24/028:34 AM
6C ZON Z0/IrZ;/61/NV 1V:8 Z 10 Z e6ed J 1e4O At 21 uoj1eoaewep IIJqumoQ / IIlqdn'l,,,,.,, PU3 "ZON m-,,.. '
'I L OL 6 cL 9- 9-
I 9m
,' 4 O *,,
'44
* .1/4 ',.V /~ "4 - 4 .4 , C'::,
.. . .. ", .r,' .
,09o OS0l,,.
og', - . ,, ,00 4-: 40"0
- i I
I 4-1t 0---- m----- - -..
-' GLZZ ,,;- - '
OI ;......:....
'-'- - '--'7 - '" t. ... . 0
.................. ----------------- . .,. o ........ ---.. .. .-- .. S' ............... .
[---- ............ i ..... ... *.o eplS , ..4.............. IlII4UMOQ
- ----------- "a"D iI*
habili*iidilddl* lililBii*ilililllDg tlllBOiH 7------- ----- ----_--,
,"No2D4l14n4i~4~~p44l4l~~~fl4fUf~l Inmmwm AIM mn~ummimownrnIlm n 11 lwlwýwum
--- -.-- z ---------- .................. ---------------
----------------- I I-I
----------------- .................. -----7:77 ý-7. ---------- - -. .-. I.. . -.-----------. . ---. ---------------0".
----------------- ---------- S...... ..................................... a's'
----------------- .-................. I
---------- S......
. 0"9 9'9 S6T
.................. S..................I i-.................
*------------------------------- oloi 0'9
- - 9 '9 S..................
---------- ....... , ................. ................... 0'6
----------------- S..................'
i..................
---------- S....... ................. ...................
. . .. .. . . . . . . . . . .. . .. . .. -6
'61.
---------- I------
------------------ ----------- 4.......................................... O'44 T.k I-.................
...........S.. . . . . . . ........... w -- - --
- ---6~
. .'to*59
............. ........... .. . . . . . ........... w0"0/--- ................ - --- -- ,
- -4~4- .. : .......... ----------
------------ .......... . . . .. ..~~~-i .. . v.. .. . .. ..... ,... . . '/ /
f : -; --it
------------ .......... --- -------------- -- --- 'k
"----------4
- 4. 444
.4'$444 44j 0"444,
!elIUOJd 61: GlZZO'NO
"A..
Ji 4 9* - Nozzle 38 Profile FRAMATOMEANP , 15.0" 1...... .. .. - ..- . .. . : --'. ".*9 / ,99 *"
"14.5- ......-- ----------------- --------- ------ ---------------- .....................
14.0 -- - .....
---- -- ---------- ------ *i.................. -i 13.5 ----------- ---- ; .
....... --------- ------ S.................... _. 1,,
13.0 ----------------------------- L..... ......... ........ *i.................................... 4.................. ---------- S Ide 1 2.5 ------------------------------------- ..-----... -------- .i................. 12.0 11.5 ----------------- ---------------- ---------------- ----------------- - 11.0 ----------------- ----------------- ---------------- ----------------- I ---------------- ----------------- ----------------- 10.5 ----------------- ---------------- ----------------- ----------------- ---------------- ----------------- ------------------ ----------------- 10.0 ----------------- ---------------- ----------------- ------------------ ----------------- 9.5 ----------------- ---------------- A--------------- ----------------- 9.0 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- 8.5 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- ---------------- 8.0 ------------------ ----------------- ----------------- ----------------- ------------------ ------------------ ---------------- :. ----------------- 7.5 ----------- L--------- I -
----- - --------- ----------. j------J-----I -----.- I------------------ I ------------------
7.0 ---------------- -----------1& ---- ---------------- --. p °-- ............... 6.5 ---------------- ---------------- ------------------. 6.0 ---------------- ---------------- .
------------------ ----------------- r------------------.
5.5 ---------------- ---------------- - - - --- - -- - --- -- --.. .---....... .......--- 5.0 ----------------- --------------- -----------------. 4.5 ----------------- ----------------- ------------------ 4.0 .......... ...... 7 3.5 3.0 ----------------- ----------------- -----------------
---------------- ----------------- ------------------ ------------------ Downhill 2.5 ----- I------------- -------. . : .- . . Side-,
2.0 ------------- ----------------- ---------------- ----------------- ----------------- -- 9 1.5 ...............I 7------- ----------------- ------------------ 9- --- --- -- 7 ------- 1.0 - - ----------- ----------------- -----------------
- . . . * .. .- S............ kl=ki*...*..-;.
-------- -d-do-0.0'. "~ .. .. .~ .
0' 50o *1 I1 2007> 250'
*7 4
-6 -8
-10 -*-11 -12 9 9- 15 ---- 16
-13 - *14
"--'-Uphill / Downhill demarcation Noz. End I
Noz 38 Chart 1 Page 2 of 2 8:34 AM9/24/02
CiC FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCF=tURE* I3LA. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-IS11I 00-09 PQ NO.: PQ-100-1, 54-PQ-1 00-2, 3, 4 and 5 A Reactor Head Penetration rFMAT'rOMZ-AMP Ultrasonic Examination Data Sheet Customer: W] MAC- Plant:- 5e-.k,c'/-' Unit: Penetration No.: y9 Procedure: 5'1-i1s- o0-'O Equipment: Description VH# Cal. Due Date SN#
.Tomloscan' "" 1 ,J/.-L 3 2.Ozgq 16 Channel P/R N/A r/. "]1A ACCUSONEX'm Data Acquisitidn Software: Version 6.2.5 ACCUSONEXm Data Analysis Software: Version 3 -7.V a" Cable Length: Got Type: *&.- t4-q-T # Infermediate Connectors: i Calibration Block: 6,,o/q3o0/ Calibration Setup: "Scan File No.:$,R?,,<7- o5 . -.T/7 Initial Calibration File: .22 ,/4,'4511111 Final Calibration File:e,,Aj-T*JUc-b 16-1b4 _
Scan Start: Z = -. - Scan Start: 0= -S Scan Stop: Z = 5, -"Scan Stop: 0 = 6X Index Increment: 30 Channel Angle Serial No. Comments I 5O Results: No Recordable Indications 2 Leak Path Detected /. Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: Date: ,9-, ,7-. Reviewed by: Level: Date: ,- . TYPICAL DATA SHEET FIGURE 5 0ý (i ti Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet ICustomer: Nuclear Management Corporation Plant: Point Beach, Unit: 1 Nozzle: 39 Procedure: 54-1S1-100-09, Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.4 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a Axial Scan t c;MSr.deg- I*'*.Stop:- T..: Idei.' ,,"
-etup:L,.a. Ch2 nli Ch7 n/a es~~~"~ ;', ~* Ch3 n/a Ch8 n/a Circ. Scan Start: L___ -j5deg @L-07 " Stop:1 365 Ideg @1 591' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_03.27.51 Cal Block SIN: 60119300 ChS n/a ChlO n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 12 T NRI 3
4 6 7 8 9 12 113 14 16 17 .... Data Loc. 0 30 60 90 120 150 ... 180 210 240 270 300 330 360 Deg ree.. . 0 30 60 90 120 1150 180 210 1240 270 300 330 360 Degrees WELD Nloz. Loc. POIE Noz. End 0.40 0.40 10.40 0.40 0.40 0.40 0.40 0.40 10.40 0.40 0.40 0.40 0.40 inches POIE MAX. 3.14 3.14 3.29 3.49 32.84 67 3.79 3864 3.76 2.94 32.79 63 32.58 43 3.32 3.18 2.39 "'2.27 3.14 2.24 inches Inches MIN. _ 22_4 2.34 2.51 2 69 3.02 2.99 Comments: Measured Thickness: 0.65 @ theta of 143 dogwith an axial positiono Limited Scan? (YIN): N Analyzed by: Dat:_. A b FJ A- Date: P_- - 7- A b Il W Oc.tY- oZ..-? Page 1 of 2 9/24/028 35 AM Noz 39
r... FRAMATOME-ANP NONDESTRUCTIVE FXAMINATInNI p~nflr*!flhIp Remote Ultrasonic Examination Of Reactor Head Penetrations NONDSTRCTIV EXMINAIONPROCDUR I PROCEDURE NO.: 54-iSI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1kReactor Head Penetration P=A-UAT A, M*,tP Ultrasonic Examination Data Sheet Customer: W MC, Plant: At I3eqc..- Unit: Penetration No.: if 0 Procedure: 5L1- Isi- 1o0 Equipment: Description VH# Cal. Due Date SN# gTomoscan "/ozzq 16 Channel P/R N/A N1 I 1 ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version g 7. I' a7" Cable Length: S CI Type: lZe- t4rq # Intermediate Connectors: Calibration Block: *6,o!/,/3o06/ Calibratiori Setup: Scan File No.:. . .. ;Y/.c'2. Initial Calibration File:jqi 2/ q.:Ug q Final Calibration File: c.,-mivE_ 'p ,". N 11.*. z Scan Start: Z = ,-.? Scan Start: 0 = -" Scan Stop: Z = S..'Scan Stop: 8 =3S' Index Increment: 30 Charmel Angle Serial No. Comments I 5"J. oq-2o Results: o Recordable mndic Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: 4,.,' f-,,, Level: Date: 9- ?_T-e7 Reviewed by: Level: Date: /Z. TYPICAL DATA SHEET ul - 0 r' . Z,1 "0 L." FIGURE 5 Page 31 of 32
A FRAMATOME ANMP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 40 Procedure: 54-ISI-100-09 INozzle Dimensions: (Kt.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.36 Probe Serial No.'s: Ch I S0420CN Ch nl/a Fig,-@ 0p de @It z- '--,',,Setup:I Ch2 n/a Ch7 n/a AxiaScak*nCh4,-St3rt:I , Id3o,-t@ ,, 'Stop.I ,*;. Ideg - ,-h3 n/a Ch8 n/a Circ. Scan Start:[I -_Jdeg@I -0.7 " Stop: 365 Ideg @1 5.98 - Setup: [3 Ch4 n/a Chg n/a Files: - A226704.31.02 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI -, _" 2 ' 3 4 5 6 7 8 9 10 12 13 14 Is 16 17Data Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 160 90 120 1501 180 210 1240 270 300 330 360 iDegrees PROFILE Noz. End 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.363 0.36 0.36 0.36 0.36 0.36 Inches MAX. 2.78 2.78 2.93 3.32 3 26 3 46 3.51 3.4"1 3.36 3 22 2.88 2.88 2.78 Inches MIN. 1.53 1.67 1.86 2.21 2 35 2 40 12.45 2.25 12.06 2.01 1.82 11.77 1.53 Inches Comments: Measured Thickness: 0.64 1@ theta of 357, deg with an axial position of ... 4.47 Limited Scan? (YINI: NI 1Analyzed by: ,",..**' . Date: * ,7- -. Analyzed by: t-.I -/* Date: 4 c4 00Y-2V-u-L 9/24/028:34 AM Noz 40 Page 1 of 2
- - 4 . -444* ,4....
4 4 4 *'4'44 F. .444 Nozzle 40 Profile '4
- . -. - 1/2,
" " FRA'ATO M rMANP 4, 44 44 ,4 4 .4 4 -- 4.
'15.0' 14.5.-------,""' - ------------------- 4.
14.:-------. ---------- -----
---------------- ---------------- --- I -------------
, 30_ . ...': -,........ ----- ----------- ---------------- I ------------------
13.5--------------------- ----I------------ I4 . I 4, 4 13.0----------------..... 12.5 -- --------- --------------- I - -----------------
~12.0:--- --------------- .......... ----------------- -----------------
11.5 - -------- ..... ------------------ ----------------- ----------------- ----------------- 11.0 ------------------ ---------------- 10.5 ....... : .......... ----------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- V.--------------- ----------------- ----------------- 10.0------------------ ---------------- ---------------- ----------------- ----------------- 9.5 ------------------ ----------------- ----------------- ----------------- ------------------ ý\ --------------- ------------------ ------------------ 8.5----------...... 8.0 1 .---------------- 7.5 ------------------- --------------- ---------------- ---------------- -----------------. ----------------- ---- --------------. 7.0 -----------------------------..... ---------------- ---------------- -- -- -- -- --
----------------- -- - - - -- - - I-- ----- .. ... ...
6.5 -----------------.--------------- ---------------- ---------------- ----------------- ------------------. 6.0 -----------------.--------------- ---------------- ----------------- -----------------.. 5.5 ------------------.--------------- ---------------- ----------------- ------------------ ... 5.0 ------------------- --------------- ----------------- ------------------. 4.5 ------------------.--------------- ---------------- -- ------- -- -------. 4.0 -------------------.-.-------------. ---------------- ------------------ 3.53.o ---- ---- ----- -- - ---------------- m hfnf-- --- n4tiuF4 M VM! L 4umIuiIl44muat.uIu.mNg4I4 23 . 444...... .......... 4.. . . -------------- 2.015 ------------------------------------.. Downhill
----------------- ----------------- . ----- Side, 2.0 .. -- ' ------
7 -------------- ------------------ ---------
- ------------- I--- ---------------- -. ---, --- -' .
- ------ S4-------------
- 1 .5 - -- - ---- ---- ---- --- -4 1 -4 .. -4 4 '4 4 1' .
.4' 4
1.0~~~~~~~4 100~ - 150 ~200 , 250 300'U 4,4 4
- ,, 4'
, S Klý ý*
44 4 14' .'-I'4.J." '444 4 -. 4 j.4,4
."'L4 "r*:. ,": '" 4' 4 4 '.4..*4 4.4 A
-2 3 -4
-8 Iz5 -6
-- 10 7
11 -12
-9 -- - - 15 -.---- 16
-113 14
~- =-- 1 "-"m-Uphill/ Downhill demarcation Noz End 1
Noz 40 Chart 1 Page 2 of 2 8:34 AM9/24/02
FRAMATOME.ANP Remote Ultrasonic Examination NONDESTRUCTIVE EXAMINATI1ON PROCEDURE Of Reactor Head Penetrations PROCEDURE NO.: 54.s-1S100 A Reactor Head Penetration PRUA'ar*A1AN- Ultrasonic Examination Data Sheet Customer: M`J rr l Plant: i, Unit: ' Penetration No.: L I Procedure: 59- is,-.,oO-o'i Equipment:
,Description VH# Cal. Due Date N#
gTomoscan n "/' sq 16 Channel P/R NA N/A ACCUSONEX' Data Acquisition Software: Version 6,.2.5 ACCUSONEX Data Analysis Software: Versior5- *."" Cable Length: Soo Tpe: i- -Tpe # Intermediate Connectors: I Calibration Block: *o/,jq3o,'/ I Calibration Setup:
"Scan File No.: f 2.2 _O . ' 7 Initial Calibration File: R*ee,_4. VC.qV Final Calibration File: c,,AnvvUD erA.r " *'.-- .
Scan Start: Index Z =7.7' Increment: 30 Scan Start: e 5 Scan Stop: Z s-~9? "Scan Stop: 0 =.5$D-' rV Channel Angle Serial No. Comments
/ 5O°*- 509 eCAJ Results: uReodble Indications Leak Path Detected Axial Flaws Detece I Circumferential Flaws Detected I5 Comments:
Analyzed 15v: Level: z Date: .. ~-,~ .Reviewed by: Level: "Date: YTTYPICAL DATA SHEET FIGURE 5 PFe 31 of 32
A F R AMATIM E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation . Plant: Point Beach Unit: 1 Nozzle: 41 Procedure: 54-ISI-100-09 Nozzle Dimensions: (ia.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 30 End of Noz. (In.): 0.47 Probe Serial No.s: Ch 1 S0420CN Ch 6 n/a I Axial Scan ,i" - Start:_LL,.L deg, @I 'I Stop ,J,"dei, ,Setup: '. Ch2 n/a Ch7 n/a
- ~
' ~ ' ' ~ . .. Ch3na Chna Circ. Scan Start: -51 deg @1 -0.7 " Stop:I 365 Ideg @1 598' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_05.39.37 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max i NRI 2
-3
-4
-5
-6
-7
-8 9
10 11 12 13 14 16 2~~ ___ C__ 11(_ 1 __. 17Data Loc. 30 so 90 120 150 ISO 210 240 270 300 330 1360 30 Degrees 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz, Loc. 0 30 60 0.47 0.47 0 47 0 47 0.47 n.47 0.47 0.47 0.47 Inches PROFILE Noz. End 0.47 0.47 0.47 0.47 2.99 13.18 13 62 3 66 13.66 13 66 3 61 3 47 3 42 13.38 3 28 2.99 2.99 inches MAX. 1.87 1 187 1 2 41 2.45 1 2 55 1 2.65 2 45 2.36 -2.16 1 2 02 1.98 1.78 1.87 Inches MIN. Comments: ' Measured Thickness:1 0 63 @ theta of 1 3581 degl with 'an axial position of 0 961 Limited Sa?(I)
. Date: 9P-2*.7 - Analyzed by: A/i/t Date:
Analy zed by:. /_=_* Noz 41 Page 1 of 2 9/24/028:34 AM
Z jo Z 96ed abed:eq L HJtl IZON ZO/tZ/6nV VC:8 uo1180jewep IIIIumolUO 1 ildfnnnnwu PU3ZO . 14 ___ 6-9 L 9 17-AC) ge ON OM 09 0.. 09z ooz 0M IA . 00I , C' 0 , A *. "A A
'I 910 0*L.
97
,,epums mI C
* , A l -u-uu~
-C - - - - - -- -- - -- - -I- - - - - - -m
- ur -u - - - - u- i u- -n - i w ~ n-uh~
- -n-um7ai - - - - - - ~
- -- ~
- -- ~~
- -- - -- ~ - -- d1 - ---- - -- - - -- ____ _. .. . .. . .. . .. . .
I-Al- ---- 0.5P 9*5
....I... ---
.... -------I---- ----------------- --------- --- ------------- I--- ----------I- ------------- I ----------- --- O' 9.9'
................. ----------------- ----------------- ---------------- ---------------- 0,9
-------------- :--. ---------------- ----------------- .................. ---------------- ---------------- 9.9
.................. ----------------- ----------------- ------------------ ------------------ ------------------ .... 1------------- ----------------- 0'L G9L 9's 0'6 9*6
----------------- ........ I-------- ----------------- -----------------
O*Zk GZt
---------------- 0 . ct
-- --- r - -- - -- -- - -
-- -- -- I-- -- -- - -- -- - -- -- - -- -- -I- -- -- - -- -- --- -- -- - -- -- -
OIS
............ ---------------- .c 9-f C;
I_________ - I_________ I _________. _________ I_________ I - J n-fl A VZI' A ,c -' EINV OV0.LVVC1VU: A' GIlUld. LP GIZZON
I R.,> -ýAA
/V?
FRAMATOME-ANP --8* NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 Reactor Head Penetration
*AMA'*tOE AtOP Ultrasonic Examination Rata Sheet Customer: hN1'c Plant: Po,,',,' Bt,,A Unit:
Penetration No.: Procedure: 6-q-Is/1 1,04--Of Equipment: Description VH# Cal. Due Date SN# gTomoscan 17 16 Channel P/R A- t4J/A 1A/ ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version *33
*3.*
Cable Length: 61o Type: 1Z(.-V-.z # Intermediate Connectors: I Calibration Block: 6o//I 3vE/ Calibration Setup:
'Scan File'No.: , -- . 3-I Initial Calibration File:
Final Calibration File: 1;z2-2 6-or. 11 .. 2 Scan Start: Z = 0. 141L Scan Start: 6 = .5 Scan Stop: Z = 1?. %Scan Stop: 8 = Index Increment: 31 Channel Angle Serial No. Comments I 6 . 35oqq Z 3o'- 35.zoz -oF D 3 &o"'s 35o00
&Cr5e- 3 60$7Z Results: < [--J cordable Indicati-ns Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed 6~y: -Z" Level: Date: / 2 Reviewed by: .--- .Level: z-i7 Date: /-27, L-01,'
ý-k &ný TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
7A
-10 At Customer:
,, -Nuclear
..... Management Corporation .. . Plant:
*. ,, v ~Point Beacho U1.tIIum I,..^nllllllLtlUII UdLdlnit:{)[~Le 1
Procedure: 54-ISI-100-09 Nozzle Dimensions: (ih.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 136 End of Noz. (in.): 3.74 Probe Serial Nos, Ch i 35044 Chi6 35052 Axial S " " Sh7 @ d " ettp: Eh 2 35202 nda Fillp:* ---- Ch3 35070 Ch8 n/a Circ. Scan Start: -5 deg @ 0.47 Stop: 365-deg @I 17.6
' Setup: I Ch 4 35044 Ch9 n/a "Files: A2265_13.02.53 _____________ Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Ad ted Circ. Extent Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Mm Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-21314 16 11 "17 -8 Data Loc.! 136 166 196 226 256 286 316 346 16 46 76 106 136 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Ders PROFILE Noz. End 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 Inches MAX. 6.79 7.00 7.31 7.74 8.19 8 48 8.51 852 8 24 7.67 7.19 6.92 6.79 Inches MIN. 5.28 5 48 5 81 6 25 6.90 7.29 7.36 7.35 6.73 6.16 5 82 5.48 5 28 ;Inches omet:Measured Thickness: 0 64 @theta of 0deg with* an axial position of 5 93 Limited Scan? (YIN):I n ________ Analyzed by: .,.-".,* *,.*.Date: */_*]0. Analyzed by: v*/A" Date: 6'/ 4 0'3-IDI£ 9/221022 51 PM Nozzle 42 Page 1 of 2
-- I 4.
* - C -. .4 45 Nozzle 42 Profile FRAMATOME ANP 7.
15.0 14.5 --- - --*-- --- - ----- "- 'IF r r 14.05......-........ 2t...... ..... --------- ------------------ 14.0 ---- - - -- -- -------- ------------------ .. - ------ 13.5.................... -------- ------------------- ------------------- ------------------- ------------------- 13.0 ............................... -------- ------------------ ------------------- ------------------- ------------------- 12.5---- -------- 7----------------- 1 11 ----------------- ------------------- 12.0 ----.... .......... ------- ------------------ ------------------ ------------------- ------------ ----- --- -- . .. .',,.. . . 11.5 ..........- .......... 11.0 ....................- ......... -------- ------------------ ------------------- ------------------- ------------------- ------ ,--- ------------- ----. 10.5 - ............. -.......... -------- ------------------ ------------------- ------------------- ------------------- - - - - -- - - -- - - - - - - - - - -. 10.0 ------------------ -------- ------------------- ------------------- ----------- ------- ------------------- 9.5 ------------------------- -------- ------------------ ------------------- ---------- 9.0 ..................... -......... -------- ------------------ -------------------- ----------- -------- -------------------- -------------------- 8.5 .............................. -------- ---------------- ..........................
, 8.0.................... -------- ---------------- ----------
" 7.50.............. ------ f 4 1U4M4
............... I nuuuuuauus alIUnflhIflmE 7.0.............. -------- ------ ---------
5.5 -------- ------------------- ------------------- ------------------- ------------------- 5.0 ......................-......... -------- ------------------ ------------------- ------------------- ------------------- 4.5 ..................... r.......... --------- ------------------- ------------------- ------------------- ------------------- 4.0 ......................-......... I I 1 ------------------- -------- q 3.5 ....................-- -------- I
-S
- 1 I-
.i 3.0 ............................... -------- - -- - - - -- - -- - - - - - - --.
25....................
- ........ -------- --------------- ---- I ----- ---- ---- ----- ---- ..........
---- . . . .. * . Downhill 2.0 ....----........-------- --......... t-------------------. ------------------
------------------- - ------- ----- Side :
1.5 ---------------------------------.. -------- ------------------- --------------- .--- ..--- ........---- . . -*-- -- -- -- 1.0 .... .... -.... - ... 20 ------------------ --------------- ---------- . .. .. ...--.. .. .. .. . ..--- '** 0 .5 . . . . .'--....... - --.... ...... --------- ------------------- ---------- --- ------------- - .....--- ..... ... ,, .. _ , . .. , 0.010 I I I O0 50 250 - " * .300',-:., 350;, '
- 100 150 D 200 05
- , ,,.'D egrees -- 12.
-2 -4
-6 7
-9 -10 - -- 11
-13 -- 14 15 ------- 16
-Noz. End --INP"Uphill / Downh ill demarcation 2:51 PM9/22/02 Nozzle 42 Chart 1 Page 2 of 2
I V FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 4A Reactor Head Penetration t=*J* :*TM.I .AN Ultrasonic Examination Data Sheet Customer: /4rlC Plant: P/,Ai', 8-,,2cA Unit: I Penetration No.: Procedure: q-j-,-/O- ' Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " z-t1u* z7 o .3 A0317 16 Channel P/R 1 1A* ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEXM Data Analysis Software: Version23-.- ?.y " Cable Length: 50o Type: Rc. -U-+41 # Intermediate Connectors: I Calibration Block: e0o// 3DO/ Scan File No.: ,z.' / Calibration Setup: Initial Calibration File:/,?;:z4.. Final Calibration File: ,*-=ctz 2r. 31.
-or, I?, '"7 r
Scan Start: Z- 7q Scan Start: 0= -. ¢ Scan Stop: Z= l'i.o" Scan Stop: 0 ;$ Index Increment: 30 Channel Angle Serial No. Comments Z ~-*°. 5 zo z- -roF D
.3 . 1,"0 35070 q qv.S'zý5 S so Vy To Results: iF-ecordable Indications Leak Path Detected /
Axial Flaws Detected Circumferential Flaws Detected Comments: ', , ,r. %a ox C-r-k VkP 1 -0' Analyzed bv: Level: Date: -- . Reviewed b : Level: 'Date: TYPICAL DATA SHEET A') FIGURE 5
ý511 Page 31 of 32
AN *. CRDM Nozzle Ullirasenir 9Fvrnimn2*re-n ri Qk f Customer: Nuclear Management Corporation Plant: Point Beach jUnit: 1 Nozzle: 43 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i.) ID: 2.750 OD: 4.000 Thickness'. 0.625 Downhill Side of Nozzle (deg:): 48 End of Noz. (in.): 3.6 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scant*¢ .. Start: j deg @ j "< Stop:. Ideg Ca Setlip;: . Ch2 35202 Ch7 n/a Filies:, , ,. c S " ; ' , " " deg S 12 ;.Ch3 35070 Ch8 n/a Cir. Scan Start:22.66deg@L*5j" Stop:0 19 ideg @I 365j' Setup:[1 Ch4 35044 Ch9 n/a Files: A2266_04..1.55 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI _ _ _ 2 A
-3 4
5
-6 7
8 9 10 12 13 14 15 16 Data Loc. 48 78 108 138 168 198 228 258 288 318 348 18 48 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 Inches MAX. 6.86 690 7 04 7.41 8.02 8.39 8 58 8 39 8.16 7.69 7.33 7.08 6 86 Inches _MIN. 4.76 499 537 569 6.25 6 81 6.95 681 6.39 5.88 5.39 5.12 4.76 Inches Comments: Measured Thickness: 0 63 @ theta of 6943 deg with an axial position of 944 Limited Scan? (YIN): N Analyzed by: Date: - Analyzed by: Aj Date: 9/23/029 34 AM Nozzle 43 c ?/'4a... Page 1 of 2 I
,-Nozzle 43 Profile ., . :, .. '*;- .
FRAMATOME ANP 15.0- ,
- 14.5,------- --- ------------ ---------- I ----------------- -----------------
14.0 ---- --- - -- - -- -- - - -- - -- ---------- ----------------- ----------------- ------------------ ---------- 13.5 ---------- ----------------- ----------------- ----------------- --------------- 13.0 ........................................... ---------- ----------------- 12.5 -- 12.0 -..----- ....--------- 11.5 ------------------- 11.0 -- 10.5 ......................................... ---------- ----------------- I---................ 10.0 ---------- k"-------------- ----------------- -::::::::::::::::: 9.5 ---------- ---------------- ----------------- ----------------- L................. 9.0 ---------- ----------------- ----------------- -- ----.....---.. . ----------------- S-.---------------- 8.5 ----------- ------------------ ------------------ arm
'1 4
J 1 mai*imammmm*tl*ll*
---------- ----------------- ----------------- S....... . ........ ..
8 .0 ---------------------.. . .. .. . . .. . . . . .-
---------------- ----------------- ----------------- ::::::::::::::::::1 7.5 - .---- ----.-..;-.-:- ------------. . .. .. -----------------
6 .5 --- ------ ------------- ------ --- -----. -... .. 6.0 ------------ - -- ----- 5.5 ---- --------. ---
----------------- ------------------ ------------------ S.....
5 .0 ....... .....
.0 ---- ---- --- --...---
----r-... . ..-- --
................ -------------- ------------------------.-------------.... I
......-------------- Downhill 7..'.
Side
---------.... ---................---............. 4 --.....
- , --. ,- . -,- -- S........ .,.. ...... .. .. . , , ,,. :- *
- - - - - - - - - k" , ,
150 200 , . 250
,_________..:*,,**. .5 .4:' ,10 300, , :
-2 -.---==.3 -4
-6 -7 -8
--- 9 -10 -11 - - -12
-- 13 - 14 -15 16 Noz. .End b4f'~~41 "='""~"~Uphill / Downhill demarcation 9:34 AM9123/02 Nozzle 43 Chart I Pa1ge 22of_
Page of 2
P ýAIV FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-1S1-100-09 I o PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1.
*Reactor Head Penetration FMAM*TOME AMoP Ultrasonic Examination Data Sheet Customer: M _. Plant: Fv/ B&--,,tA Unit:
Penetration No.: 9Z. Procedure: ,00-/"-
/O- -of Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan I l *-z7o 3 A0o3i7 16 Channel P/R II1 ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX"" Data Analysis Software: Version a-.5- ,.g Cable Length: 5 01 Type: 12.(-,-U'A # Intermediate Connectors: Calibration Block: d//,I3rE/ Calibration Setup: Scan File No.: 2,* .g 2 7.$ Initial Calibration File:1Z2-.62 1.. 29.3o Final Calibration File: I"z-zt4 s".i.r, 37 Scan Start: Z .L47" Scan Start:0= -<- Scan Stop: Z= ji.c ' Scan Stop:0=y74r. Index Increment: 3° Chanrnel Angle Serial No. Comments 6 35oqq Z 3o*I* 3,fZoZ o* 3 (.,,os 350*0o 5" f 005 3S052.z Results: o"ecordable Indicationss Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzedb :Leve 1: -27: Date: 49- :2 2-0 Reviewed by: -Level: Date: ' ~~
-/ TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
d A. FR A".A-ntATO AV*JP
- --.---...- '*****n**-*s.*s.I5 I..'L4Ll JIIL C..... ... .A ti.tr~c~n i"*r.; F--*
Customer: Nuclear Management Corporation . . Plant: Point Beach I l Unit: 1 Qk,,l W%;f¢ Nozzle: -44 Procedure: 54-ISI-100-09 INozzle Dimensions: (ia.) ID: 2.750 CD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 263 End of Noz. (in.): 3.58 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scar'v t, Start: deg:@I., . . . Stop:, ideg @ j. Setup:i"
- . Ch2 35202 Ch7 nla iFiles" "'-. . -' Ch3 35070 Ch8 n/a Circ. Scan Start: 0.47 deg @1[-5-" Stop: 19 Ideg @1 3651' Setup:[ 1 Ch4 35044 Ch9 n/a Files: A2265_21.37.31 Cal Block SIN: 60119300 - Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-1 NRI -3 -4 -6
-7 8 9 10 11 12 13 14 15 17 Data Loc. 263 293 323 353 23 53 83 113 143 173 203 233 263 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 Inches MAX. 6 56 6.74 7.14 7.59 8.30 8 30 8.30 8 17 7.90 7.55 MIN. 7.14 6.78 6 56 . Inches 4.78 500 531 5.72 696 6.92 687 6.95 6.14 560 5.18 Comments: Measured Thickness: 500 4.78 Inches 063 1@ theta of 93 deg with an axial position of 9.15 Limited Scan? (YIN): N Analyzed by:-K, Date: 2-2'Z- 0-2 Analyzed by: Date: 9123/029:32 AM Nozzle 44 Pag 1 of 2 Pagel1 of 2
- t,'.
,a-,.
.4,...
Nozzle 44 Profile - FIRAMATOME ANP a a -.
"'-a 15.0 0 I I I - I 14.5
_: -------------- 1................. 14.0 .................. ----------------- ----------------- . i i 13.5
----------------- ----------------- ----------------- S........ - ----- ;. ..
13.0
------------- i .. .---............
----------------- ----------------- ----------------- --............ ---.... upSl:[do 12.5 12.0 11.5 11.0 ---------------- ---------------- ----------------- ----------------- I........ .........
10.5 ----------------- ---------------- .................
-i ----------------- ----------------- -----------------
10.0 ----------------- 9.5 ----------------- I -------------- 9.0 ----------------- ---------------- ----------------- ----------------- ----------------- 8.5 ----------------- ---------------- ----------------- ------------------ ----------------- 8.0 ------------------ ----------------
ý;
----------------- ----------------- I 7.5 7.0 6.5
~
.t~hithIhfliiWf lMISIU~IfVIMAA WIt~h kf~lzMuhkwk Sh7 khý hfIýtar h~t~h4*i~7I1I~t1~iuu
- - - - -bh-
- -n--n-h- -
6.0 ----------------- 5.5 ----------------- - --...-----------. 1................ 5.0 4.5 ----------------- 4.0 ------------------ L:Z: ------------- 3.5 i ]* ' .............. ... a............ 3.0
. ...... ---- .......--- ------..............--- ...............--- ...........---.---.....--.---...----. Downhill 2.5 -----------------------------------------------------------------------------
2.0 ------------------------------------------------------------------------ Side
. -. .-. -. 7t
. ----- . . . .. . . . . ..- . . . . . . ..-. . . . . . . ..- . . . . . ..-- --. . . . . . . ..- L . . . .L. . -: " ,*.
1.5 ~~~~~~~~-------------------- -------------------------------------------------------- 1.0 0.5
- t -
- .. .. ,-., L..:
.. . .. .. . t.................
.. . I- ........- -- -....
* -a -
.a? 'tt
"'1 4%tat.,
7 ; rŽ( 0.0
- 0. '. - 100., 150 200 250 300, 350 , " , , .
-2 a.a-a..3 -4
"-5 -6 7 8
- 9 -10 ----- 11 --- 12
- 13 -- 14 - 15 --..- 16 I
- Noz. End .......... 1 -="-au Uphill / Downhill demarcation 9:32 AM9/23/02 Nozzle 44 Chart 1 @9k09-/. - Page 2 of 2 1%
P 014ThAýV 7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration FRANIAr=_E AMP Ultrasonic Examination Data Sheet Customer: M/c. Plant: Pzl. ',e., Unit: Penetration No.: $"- Procedure: " Equipment: Description VH# Cal. Due Date SN# gTomoscan , f-7 o 33I7.
/Z 16 Channel P/R I/A ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version-3.. ..*.0 MY Cable Length: 5O1 Type: IZG.,- t # Intermediate Connectors: I Calibration Block: 1,0/113DO/ Calibration Setup:
ccan File No.: v.'~.. 6 f-
/47. Initial Calibration File: v , - /.O. 2.36 Final Calibration File: A.z.L;-ox'.i . .77 Scan Start: Z '/q7 Scan Start:' = -.X Scan Stop: Z = 17.o Scan Stop: e= 7-c.s-'
Index Increment: 30 Channel Ang1e Serial No. Comments
/ 60 .35Fo/
.30
(,,"fs -"5*zoz OD 3 4 's -35*0 O Results: ti Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: ,Analyzed y: .'-.-- . .--- Level: Date:.9" Reviewed by: Level: Date: /o--O/ TYPICAL DATA'SHEET FIGURE 5 (ý914L+' Fage 31 of 32
A A C-ustomer: Nuclear Management Corporation
,- .=.*. *uoumt
!Plant: Point Beach
~AI,-^llll1tUII UI[dII TU-nit:
oi*i~ee Nozzle: 45 Procedure: 54-ISI-100-09 JNozzle Dimensions: (Rh.) ID: 2.750 OD: 4,000 'Thickness: 0.625 Downhill Side of Nozzle (deg.): 285 'End of Noz. (in.): 3.6 Ch 1 35044 ' Ch 6 -35052
*;xa Scan', Start"-+*:" deg';,.-:" ýtop'o' =".-;.' setupI "-i'* Ch2 35202 Ch7 n/a
. * .. .. .. ,,*- Ch3 35070 Ch8 n/a Circ. Scan Start: -5deg 1 0Stop:.
73 I dog @9 S 1 Ch4 35044 Ch9 n/a Files: A2265_20.16.54 Cal Block SIN: Depth EdPitI 60119300 Ch 5 35052 Ch 10n/a EdPoint 2 Axa dutdCr. Extent Flaw Flaw Flaw Fla Weld Location Flaw Surface to Mi Mi Max Max Total Mi Max Total Length Angle TWO Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Mn Max 7--'5 9 T 13 1 T 16_ _ _ __ _ _ _ _ _ _ - _ __ _ _ _ _ _ 12 - - - - _ _-. 13
`14 15 16 17 Data Loc. 285 315 345 15 45 75 105 135 165 195 225 255 285 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 PROFILE 300 330 360 Noz. End 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 360 3.60 3.60 3.60 MAX. 647 665 688 8.09 8.06 821 3.60 Inches 8.15 809 7.83 7.44 7.00 662 6.47 Inches
.MIN. 4 87 T4.87 5.14 665 6.71 6.79 6.91 6.76 6.29 5.73 5.26 4.99 4.87 Inches Comments: Measured Thickness 063 thetaof 135 deg with anaxial position of 11.21 LImited Scan? (Y/N): N Analyzed by: Date: ---vo9 . 0 IL. Analyzed by: Date:
9/23/029'32 AM 9I2IO2~32AMNozzle 45 914iAV- Page 1 of 2
.... J Ji
-- .. -'-A NaP Nozzle 45 Profile
, " FRAMATOMR ANP 4 ,- .
a . - A 15.0' 14.5 -- ------------ -------- ----------------- ----------------- ----------------- ------------------ ------------------- 14.0 -- ------- --- ------ - -- ----------------- ----------------- ----------------- ----------------- --------------- i--- 13.5 ------------------- ..------------- ... ----------------- ----------------- ----------------- ----------------- 13 .0 ...... - --I - ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- 12 .5 . .. . . . . . . . . .. . .. . ... . . . .. . . . .. . . .. .. ----------------- ----------------- ----------------- ----------------- ----------------- 12.0 ------------------.. 11.5 .. . . . . . . . .. . . . . . . . ----------------- 1 1.0 - ..---------------- ..------------- ..------------------ ------------------ ------------------ ------------------ ----------------- ...... 10 .5 ---------- -- ------ . .. . . . . .. . . ...- I -- .5-
~~~~~
-- 1--- -- 1--
.U --...............-................... ---------------- ----------------- -----------------
8.5 ----------------- ---------------- ------------------ ------------------ 8.0 ---- 7.5 t---------- t...-*-----'--------, *----------*--------....... ------------ ...... 7.0 ---------------- ---------------- ---------------- ------- ----- ---------------- ----------------- 6.5 1-"' ----------- "777 ------------ ------------------- ---------------- 6.0 ----------------- -------- ------ ---------------- ---------------- ---------------- ------------ ----------------- 5.5 ----------------- ------ --------- ---------------- ---------------- ---------------- ----------------- 5.0 --------------- ----------- ---------------- ---------------- ---------------- ----------------------- ----------------- ----------------- 4.5 ----------------- ---------------- ---------------- ----------------- ---------------- ------------------ ----------------- 4.0 ------------------ ----------------- ----------------- ----------------- 3.5 .......... + .........-......----... ----------------- 3.0 ---------------- ---------------- ----------------- ----------------- ------- - 2.5 ---------------- 7- Downhill
---------------- ----------------- ----------------- ----------------- ----------------- II ý 1ý Side 2.0 -.--. --- ----- ... ...
1.5 ------------------------- ---------- ---------------- 1.0 - --------- . . . . .[----- --- -- -------------- ------------- 0 .5 - .......---I .......-- ------ ----------- ------------------ --- - - -- - - - 0.0 ---------- ------------------ ------ 100 150 , 200 , 250 ',; 00", , ,: . 350"* '"';J " ;*
--- 10 - - 11 ---. 12
. .. 14 -15 ..... 16
- ! -'"I-
--- -N z. End ='===Uphill /Downhill demarcation 1
9:32 AM9/23/02 Page 2 of 2 Nozzle 45 Chart I1 ) ],.,l.
FRAMATOM-.ANp NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations SPRCEDRE O.:54-S- 00 PROCEDURE NO.: 54-0-100-0I Reactor Head Penetration F*Al=-M.E AM*.P Ultrasonic Examination Data Sheet Customer: Nnrc Plant: ,CPo/,. BeqA Unit: I Penetration No.: Procedure: 6"q-27-A/00- Of Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -i I-f 2 /z-7o - Ao3i 7 16 Channel P/R N-1i .WIA N/1 ACCUSONEX` Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3-" -1.S Cable Length: 5o0 Type: Rc.,- 1-,4 # Intermediate Connectors: I Calibration Block:.&o//,.3vEI. Calibration Setup: S'can File No.: Initial Calibration File: ,2.2"2.,,._/o.28.3 A.1'&Z.,£".... iO..o5",9. *Final Calibration File: , I*.3, Scan Start: Z = o.v-1 Scan Start: 0 = -5 Scan Stop: Z = /MO Scan Stop: 0 = 3,, t .Index Increment: 30 S Channeil Angle Serial No. Comments 3 &.O"s -35ojO 6,~ os ~ 36
*o2 5 Results: irbje Idicatýions Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed b: Level: / Date: Reviewed by: - Level: "7 Date: /O/,/0 -L_ 1 TYPICAL DATA SHEET A4-3 O-04 1 FIGURE 5 Page 31 of 32
A( FRAMATOY'E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 46 Procedure: 54-ISI-100-09 Nozzle Dimensions: (Inb) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg-): 308 End of Noz. (in.): 3.67 Probe Serial No.'s: Ch i 35044 Ch 6 35052 -xlal Scan',-Ji :Q- 5tart:ld- - : .'1 StoP'l, __d_,;.etup;0 -.,' $.-, Ch2 35202 Ch7 n/a Filesi: ~~~~~~~~~~~~~~........
....*................. ,......................- dg:~
-, :-,-*..... =.....** h3500 h nl S.......
Circ. Scan Start:[ -5deg @ 0.47 o Stop:I 365 Ideg @I" Setup:1 1 h335070 Ch3 Ch4 35044 ChB Ch9 n/a n/a Files: A226517.05.27 Cal Block SIN: 60119300 - Ch 5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adiusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 2
-3 4
5 6
-7 8 __
9 10 12 13 14 15 16 17 Data Loc. 308 338 8 38 68 98 128 158 188 218 248 278 308 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 Inches MAX. 653 661 800 7.87 8.00 8.10 8.00 7 94 7 66 7.25 7.00 6.77 6 53 Inches MIN. 5.12 520 677 669 692 7.00 6.95 669 639 5.87 5.47 5.22 5.12 Inches Comments: Measured Thickness: 062 @ theta of 1 deg with an axial position of 549 Limited Scan? (Y/N): n Analyzed by: Date: /7 /7-- Analyzed by: ri 7A Date: 9/22/026-59 PM Nozzle 46 Page 1 of 2
Zo 10Z I PNOL19V91"IZZON ZOIZZI6V'd 69:9 U0ileolewep ijjqumocjI / 11qdnmmnn~umos PU370ZON. 9 6-ir- 9
.4 44- .
.4 4. 4' 4- -.4 44.4 2.
seaoe 4,
*>. .4 4 4 4Q9 OOL 44/444.4
+ + .1.
4'--------
------------------- ------------------ ------------------ .............. - - 90 4 ---.44
- 4. 4 4 -- -- --
" O .4 .4 4~4 11444
--- ------ -------- -------------------I ------------------- -----------------
---------- *------- ------------ -------------------- -------------- ----- --------w---------- -----------------
nin ---------------
-,=, -----ý - ;;;;;:------ w----- --------
- ------------- =r (D
.a.ý- - -
a
--------- ----- -l
------------------- -------V--
4 -- ' - --- 44 - -- 44 4 4 4 444444.44, 4 . 4-- 444444------------
- 44. 4. *.4 -- ----
7 7 ----------
-- -- - , 4. --' 44-
----------- I.......
I ------------------- ........: ---------- ----------------
-------------- ------------------- I------------------- -------------------- -----------------
444 .44;444 4.4, . 4... 4*4 4-44
.4" .4-4 44.444,44 4
- 4 I
-4 I ________ j ________ I ________
-4 'U (44 44444 ' >',, .44 44-. *4-1.
*4,4.441;4.-4 4
4 (,* 4 4 4 4 ~ '.'4 NV
'89IO~d 9V OIZZON 4 . 4 ("'4' 444 4/ 4 -- 4 0
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-4Si.100-09 f PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
.A Reactor Head Penetration PJP.AMMMC AMP Ultrasonic Examination Data Sheet Customer: "Mnc Plant: h,,,# e,,. ,tA Unit:
Penetration No.: 7 Procedure: 6"q-o$/-1-/ Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -/z.7o o3i " 16 Channel P/R / 1A/ ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3-" 3.. Cable Length: 50'1 Type: R.-I"-* # Intermedibte Connectors: I Calibration Block: e o/I 3zvE/ Calibration Setup:
"Scan File No.: A le'-.o7.
0 Initial Calibration File: AssLt,2-jo.Z S.3o Final Calibration File: ,7vzc-..r.19. Scan Start: Z = 0, q:7" Scan Start: e = -5 Scan Stop: Z = "2.4 Scan Stop: 0 =4r Index Increment: 30
-Channel Angle Serial No. Comments 1 6' 35'oWq 3 /- 3-51D "S5zo *s
. 0'CI -35o0?
q~ ~ s~.Z* o q,ý "ro b Os 36oq2.. Results: o Recordable Indications> Leak Path Detected / Axial Flaws Detected Circumferential Flaws Dftected Comments: Analyzed I*y: - Level: Date: '/ Reviewed by: , ,. Level: Date: 16121 TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
Ac CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 47 Procedure: 54-ISI-100-09 INozzle Dimensions: (Ia.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 315 End of NozL (in.): 3.68 Probe Serial No.'s: Ch 1 35044 Ch' 35052 AxIal Scan* Sta!t:I d "- "',0,stor:.l--. Ide l -4"Sl'_;_ Ch2 35202 Ch7 n/a ________________________i.._____________________ Ch3 35070 Ch8 n/a Circ. Scan Start:1 -51deg @1 047_" Stop:I 365 Ideg @1 18861' Setup: I Ch4 35044 Ch9 n/a Files: 5-~kMTM______ A2265_16.07.34 _______ Nozzle_ Cal Ultrasoni Block_ SIN: Examiatio 60119300Data___ Sheet_ Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 2 3 4 6 7
-8 9
10 11 12 13 14 15 16 17 Data Loc. 315 _____ 6~~~~~~~~~~~~0 345 15 2______ 45 1____ 75 _____ 105 ___ 135 165 195 225 255 285 315 Degrees WELD Noz. Loc. 0 30 60 90 120 150S 180 210 240 270 300 330 360 Deglrees PROFILE Noz, End 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 Inches MAX. 6.77 6.90 8.17 8,10 8 24 8.33 18 33 8 17 7.83 7.45 7.11 16.88 6.77 jInches MIN. 532 541 688 695 7.11 7.31 17.31 7.04 665 608 561 15.39 5 32= inches Comments: Measured Thlckness:l 0 63 @ theta of 1deglwith an axal position of 9 84 Limited Scan? (YIN): n I Analyzed by: / . Date: q'/717O. Analyzed by: vi/1A Date: 9/22/026 20 PM Nozzle 47 page 1 of 2
1 t t *:-"4' ' 4 Nozzle 47 Profile ' ' * . 5'$
, ,FRAMATOME AN1P ' +C"+ ' 4 *,,. *+f
'41 14.5 " '- ---'7 ------------- --................ ..
i 14.0 - I-
---- ------------------ I-----............... ------... . .......-
13.5 ....-- . .
--.................... +-.....---------------
13.0 - ..-------------------------------------- -... -------------- S................. -------- -----.. --- ---.
- o. ------------------
S.... . ......... -77". 1 2.5 - ..--------------- ..- ------------------- ----------------- ------------------ 12.0 11.5 ............-
------- 7
------------- 2---- ------------------
11.0 -------------------- ------------------- --- -------------- - 10.5 - ............ ------------------- -... -------------- S................... ------------------ 10.0---------------------------------- -------------- --------- ------------------ ------------------- 9.5 ----------------- ------------------ -------------- ------------ A ----- ------------------ ------------------- 9.0 ----------------------------------------- 8 .5 ....................----..................- -...
,, 8.0 ---------
8.5 --------------------- --------------------
-I t"S 7.0 7 ------ ...
........... .. I 4 UiuiflflIbbhamImhn 4! nrnu n1,hnnunummu I
------- 77:7:777-7 6.5 --------------------- -- .. --. ..- .-- .. ---
6.0 5.5
------------- I------
5.0 --- -- - -- - - - ------------------- . . .. . . t.----.. . --------------- 4.5 ---------------------. -.----------------- .-.---------------
------------------- ----------....----.- I------- ---------- -------------------
4.0 --------------------- -------------------- --... --------------- -------------------- ----------..-.-.---- ---------. --------- 3 .5 ------ ------------- 3 .0 --------------------- -------------------. -... - -............... --.-.-.-.-.-..-.-.-.-.- 2.5 .... 7. --
-- - - ------------------- ----. . .... - - - - ------- --- Downhill 2.0 . -----
. ------------------ :--. .---.. .- .- .---- . -------- -------------------- ----------- ------------- Side-1.5 j ...................------- ................
1.0 .. ..-------.. .
-- -- -- r"-- ----------------..----
0.5 .. .. ----.-. .- L ---------..- ..-- -_ . 0.0 ' .. . . .. ... . . ... . .. - *.- 4 150 . 200. 250 ". " '.300 , 3 50 r , 01 ',0' 50. ,+, . . + +, -. +,, , ' ,,-, F "+. A+ Degrees , , ,+ ,,* ' , .- . - .., .* ; " '.+
-- 5 -2 - 3 -- 4
-6 7 -- 8
-9 -- 10 -- 11 ---- 12
-- 13 14 ,15 16
--- Noz. End --.,--1 "On "Uphill I Downhill demarcation 6:20 PM9/22/02 Nozzle 47 Chart 1 Page 2 of 2
P o1/AAIV7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I. PROCEDURE NO.: 54-1SI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
*A* Reactor Head Penetration FM* OE AtNp Ultrasonic Examination Data Sheet Customer: AjM Plant: Bo,,,, 1' Unit: I Penetration No.: Procedure: 5q",'-/-2--/D '-Of 0 Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan 7iL17- 7 o ;Z0o3i7 16 Channel PIR 1U/A ACCUSONEX*M Data Acquisition Software: Version e.2.5 ACCUSONEX' Data Analysis Software: Version 3.8 0) Cable Length: 501 Type: R6,- 1-.+ # Intermediate Connectors: Calibration Block: &-o//,93DE/ Calibration Setup:
'Scan File No.: , -/. *3-'Z.- Initial Calibration File: _
Final Calibration File: A.2 - S'.
' /03 Scan Start: Z q7"' Scan Start: 0=. V Scan Stop: Z= 12. 7 Scan Stop: e= Ys-Index Increment: 30 Channeg Angle Serial No. Comments S 6° -55o~qq 60 -350-f 3 - &0"s "55*Zo
,.i q4S-z6" -S o -r*o F=Jb 5" &_e56 3 6OFz Resultsid ýNoRecordable Indications* -LeakPath Detected t7oa_ Flaws Detected! Circumferential Flaws Detected Comments: tjgr%
A nalyzedl~:./.,.*/IL; Level: -2r_ Date: 9--21-o'-z-LReviewed by: /"Level: Date: /-* z TYPICAL DATA'SHEET FIGURE 5 Page 31 of 32
A FPA.-ATOM*" ANt=r CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Cor oration Plant: Point Beach Unit: 1 ' Nozzle: 48 Procedure: 54-ISI-100-09 INozzle Dimensions: (il) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg): 47 End of Noz. (In.): 1.29 Probe Serial No.'s: Ch i 35044 Ch 6 35052
,XIdl Schn'04,1,
,~~ l,ýJ1.P.@ stop: T,-,-, .";" e g @1 S t o p:,,I *&,.I Ch2 3,52'2 35202 Ch7 n/a
~Ies~ ~ ,~.~ . ~t~Ch3 35070 Ch8 n/a Circ. Scan Start:I 0.47jdeg @[_-5 " Stop:I 12.71 Ideg @1 3651" Stop: Ch4 35044 Ch9 n/a Files: A2265_01.31.25 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI ,
-3 4 5 6 8
-9 10 11 12 13 14 15 16 17 Data Loc. 47 77 107 137 167 197 227 257 287 317 347 17 47 Degrees 60 90 120 150 180 210 20 270 300 330 360 Degrees WELD Noz. Loc. 0 30 1.29 1.29 1.29 1.2 1.29 1.29 1.2 1.29 1.29 1.29 1.29 Inches PROFILE Noz. End 1.29 1.29 MAX. 4 09 14.41 14.70 1 5.19 5 5B8 - 5 82 5 95 5 93 5.58 5 21 4.72 4.54 4 09 Inches MIN. 3.19 1 3.31 13 60 4 03 4 46 14.76 4 97d 4 82 4.46 4.09 3.64 13.27 3.19 Inches Comments: Mleasured Thickness: 0.64- 75 -thetaof 2541 de6l with an axial position of 9.56, Limited Scan? (YINF: N 1Analyzed by: , ... *: , _DateF73 -I *a " Analyzed by: 37//A Date:
9/22/028:59 AM Nozzle 48 Page I of 2 ag 1 of 2
AMT". Nozzle 48 Profile ""1 FRAMATOME ANP 15.0-. r a r T a -- - - . ,
--- .--- , ,I-14.5 14.0 S.. . _- ... . . 2 '., 2 .. a"
. *-. ":*2..
. 2.It ' ""** '""
13.5 -------------------- 13.0 St... 4 ------------------- 4 7 ---- i--- - ---------------.. ----- ----- --- -Uphilll--; S...._.._............... Up il,., 12.5 12.0 4.................... 11.5 11.0 r................... _: ----------------
------------------ 4.................... -------------------
[][))--[-]-----]--- 10.5 10.0 t................... 9.5 9.0 [------------------- ................... n-................... 8.5 8.0 S7nA 7.5 6.5 -..----..------------... 6.0 --- - -- - - --- - 5.5 ------------------------ ------------------- ------------------- 5.0 4.5 4.0 3.5 3.0 2.5 Downhill 2.0 ......... ...... ..... ,.... ..... ........ . ...----- ...... ....... ........ ....... . ....... ....... ........-------.......-...-.-.......--... _.---"--....--.- 7 . Side 1.5 1.0 0.5 Ant 0 . 50 100 150 200 '250 300" 2 350 "
' t Degrees 4 ;.- " - ."'A 4k"J 4
'-41"
- 2 - 4 I"'
Th 4
*-5 -6 7 -8 4
-- 13101 -1
""-13 - 14 -15 "'4'"
' Noz. End ........ 1 m"-'"='Uphill I Downhill demarcation 8:59 AM9/22/02 Nozzle 48 Chart 1 (Page/rof Page 2 of 2
I4,W$7A,ýI7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations j PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration FY4M.A=0tMZAP Ultrasonic Examination Data Sheet Customer: NM'c Plant: ,,, 8,.., Unit: I Penetration No.: Yq Procedure: "-qjs/--/s90O9 Equipment: Description VH# Cal. Due Date SN# gTomoscan i -/L7.3 A0314 16 Channel P/R ACCUSONEXI MData Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version 3.8"w Cable Length: 65'0 Type: P- 1-'M # Intermediate Connectors: I Calibration Block: "6o// 3DC/ Calibration Setup: Scan File No.: ,4.2.-99-_ C : . -' Initial Calibration File: ,* z2 - . Final Calibration File: o- .I?.J7 Scan Start: Z= ,7 "'Scan Start:,0= 0 Scan Stop: Z = -z.?7,'can Stop: 0= 3'C" Index Increment: 30 Channel Angle Serial No. Comments 1 60 . 35o/qq
?-- o IO'
/_ 13 5"_o 1"-_o_D _-
3 &0,,0- "3-So Results: *No Recordable Indicatio-n Leak Path Detected 11 Axial Flaws Detected Circumferential Flaws Detected Comments: ii KT. Analyzed by: .. Level: _ Date: - /-: "2.. Reviewed by: LLevel: Date: /J-1Z- I
- oTYPICAL DATA SHEET FIGURE 5 I $ Jro, Page 31 of 32
A
=R A M.LTOMI,1E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 49 Procedure: 54-ISI-100-09 INozzle Dimensions: (li.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 52 End of Noz. (in.): 0.94 Probe Serial No.'s: Ch i 35044 Ch 6 35052 t Ž,. I"-Stop:
deg 'e. Stop: Ch2 35202 Ch7 - n/a
,.~.~', -. ,,i , .. , .Ch3 35070 ChB n/a Circ. Scan Start:_ -Jdeg @1 0.47 I" Stop:' 365 Ideg @1 12"711" Stop: Ch4 35044 Chg n/a Files: A, . _*___-_o.o.-.7. Cal Block SIN: 60119300 Ch5 35052 Chl0 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (in.) Ratio Orientation Min Max I NRI "'__
23 ,_ 4 5 6 9 10
-11 12 13 14 is 16 Data Loc. 52 82 1112 142 172 202 232 262 1292 322 352 22 52 Degrees WELD Noz. Loc. 0 30 ' 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.94 0.94 0.94 0.94 0.94 10.94 0.94 0.94 0.94 0.S,4 0.94 0.94 0.94 Inches MAX. 3.92 4.07 4.46 4.76 5.13 5 56 5 62 5 49 5.17 4.70 4 53 4.07 3 92 lInches MIN. 2.66 2...276 3 05 3 58 3 88 4.39 4,47 4.29 3 88 3 53 3 04 2.70 2.66 lInches Comments: Measured Thickness: 0 64
- ht f 2131 dealwith an axial position of 6.2 Limited Scan? (YIN): _ N I i Analyzed by: fJA...**/,__Date: t?-.A; t- Analyzed by: 13* Date:
9/22/029:03 AM Nozzle49 ' Page 1 of 2 N
) k...
A FRAMATO0MANP Nozzle 49 Profile i!- 2 15.0 14.5 ------------------- 14.0 .................... S................... -................... 13.5 ................... .................... 13.0 ------------------
,=....................,
12.5 S................... ------------------ *................... ------------------ 7. 12.0' .................... ............... I... ------------------- 11.5 .................... ................... 11.0 ................... S.................... 10.5 ......... *........... ------------------ ------------------- . . . .. ........... r 10.0 ------------------- ------------------- 9.5 -..... . .... ... . .. ...
,i....................
9.0
.J.. ...... .......... 4....................
------------------- S.....................
8.5 -... . . . . . . . . . . . . . . . . ------------------ ,-. . . .. ... . . . .. . . . .. 4........... A......... ------------------- 8.0 ................... .................... 0) 7.5 ------------------ .................... 7.0 ------------------- 6.5 ------------------
*t....................
6.0 ................... -------------------- 5.5 ------------------ 5.0 ------------------- 4.5 S.. ............ .. .. . .. . . . . . .. --.. . . .. . . . . . . .. .Mu. . .. MO . .. . 4.0 3.5 . . .. .. .. .. .. .. .. .. .. .. ..~~~~~~~- .. .. . . . 3.0 S... . . . ... . ... . . . . .. . . . . .. . . .. .. . . .. .. . . . . ..--. 2.5 --- ---- i--- ---- ----------------------------------------- Downhill 2.0 l--- --- ---.-- --- .--- --- --- --. - -. - ---------- ---. I.--- ---.--- ------ ------- --- --- ---- --- -----. Side 1.5 -------- ------------- ---------- ---------- ---------------------------------- --
'L ;
1.0 0.5 0.0 0 50O 100 150 200 250 30'0, 350 . Degrees '
-2 -- 3 -4
-5 -6 7
--- 13 -10 --....l 12 14 _ _ 15
..-- "u-n'"UphillI Downh fill demarcation *:
Noz. End 1 9:03 AM9/22/02 Nozzle 49 Chart 1 7 . Page 2 of 2
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE I Remote Ultrasonic Examination hI Of Reactor Vessel Head Vent Line Penetrations 1 PROCEDURE NO.: 54-ISI-137"00 I___ PQ NO.: 54-PQ-137-Gi A RPV Vent Line'Vent line Data Sheet Customer: /Y/nt C Plant: Pojg/ 8e, Unit: Vent line No.: /, Procedure: 5'-q-/1/-137 - o Axial Scan Setup: , Scan Start: Z = -1. ;z Axial Scan File No.: A -ZL(, . Scan Stop: Z = .5.____ Channel Angle Serial No. 1- :O°L q-Z(,,,- OZo03 2 700S z-c.- v oZ0oo3 4 - 9;T 14,-ooo03
'_5
___- Ioloo3 Performedlby: Date: Analyzed by: , ,e-- Date: Results: o
-F-Iaws Detected Axial Flaws Detected Circ. Flaws Detected Comments: Z,*ee.'..reA. ,. .,,o /
It ... Figure 1 Ne Page 14 of 15
A CRDM Nn77In IIItrnni,,
-- - - - - --.------ 5S**
Fv2min2finn flf ULcS Qk*CL E 1 Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1. - Nozzle: Vent line Procedure: 54-ISI-137-00 with CIA FRA-02-012, PB-2-004INozzle Dimensions: (lit.) ID: 0.750 OD: 1.046 Thickness: 0.148 Downhill Side of Nozzle (deg.): 0 End of Noz. (In.): 0 Probe Serial No.'s: Chi1 9266-02003 Ch 6 n/a Axial Scab,;4 , .. Stt"l, .. Ideg : :o I .'-t6'--, -. Ide, . --'.-~Setup: ,', Ch2 9266-02003 Ch7 n/a Fi6; ~~: 6.r:V. I- Ch3 9266-02003 Ch8 n/a Circ. Scan Start: -51deg @ -1.7 " Stop: 365 Ideg @ [I j Setup:[ Ch4 9266-02003 Ch9 n/a Files: A226610.29.36, _11.00 52, _12.20 53 Cal Block SIN: 6012827D1 Ch5 9266-02003 Ch10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDlOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-2 3
4 5 6
-7 8 -9 10 12 "
13 14 T 16 _ 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 1 00 1.00 1.00 1.00 1 00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Inches MIN. 000 0.00 000 000 000 000 0.00 0.00 000 000 0.00 000 0.00 Inches Comments: Measured Thickness: @ theta of deg with an axial position of Limited Scan? (YIN): n Analyzed by: Date: bt. Analyzed by: r'.I Date: If 61 9/231025 05 PMV Data Sheet -Vent Line Page I of 2
.1-.,
Vent'Llne Profile C., rFRAMATOWE ANF I.,
'-'Ii 15.0' --I II
'.4-
--- 7--------------- I -------------------
I 14.5:. ---------- I E I 14.0 - - . ....... ---------- ------------------ ------------------- ------------------- ------------------- 13.5 ---- ----- ---.-- ---------- ------------------ ------------------- ------------------- ------------------- -- ---------------- 13.0 ........ ---------- ------------------ ------------------- ------------------- ---------------- ----- 12.5 .. . . .. . . . . .. .. . . .. . . .. .... . . ---------- ---------------- ------------------- ------------------- ------------------- 12.0 ............................ ---------- ------------------ ------------------- ------------------- ------------------- ----------------- 1 1.5 - ..--------------- ..- ------- ---------- ------------------ ------------------- ------------------- ------------------- ---------------e-. 11.0 -.-- ....------------------- ---------- ------------------ ------------------- ------------------- ------------------- ---------------- 10.5 .. . . . . . . . . .. . . . .. . .. . .. .. . . . ------------------- ------------------- 10.0 -.- .......----------- ------- I.., ------------------ ------------------- 9.5 -.--- ...-------------------
ý\------- ------------------- -------------------
------------------ ----------- ý\__-___. ------------------ -------------------
9.0 -.--- ....------------------- ---------- ------------------ ------------------ ------------------- ------------------- ------------------- 8.5 -..-- ...------------------- ---------- ------------------ ------------------ ------------------- ------------------- ------------------- cl) 8 .0 -..---------------- .- ------- ---------- ------------------ ------------------ ------------------- ------------------- -------------- X 0 7.5 -.-- ......----------- ------- ---------- ------------------ ------------------ ------------------- ------------------- i ------------------- 7.0 -..-- ...------------------- _Ij -------- ------------------ ------------------ ------------------ ------------------- ------------------- 6.5 ................... -........ ---------- ------------------ ------------------ ------------------- ------------------- --------- : --------- 6.0 -..-- ....------------------- ........... ------------------ -------------- ---- ------------------ ------------------- I ------------------- 5.5 ---------------- ------- ---------- ------------------ -------------- ---- ------------------- ------------------- ------------------- 5.0 -.--- ....------------------- ---------- ------------------ 4.5 -.-- ...------------------- ---------- ------------------ ------------------- ------------------- ------------------- 4.0 -.--- ....------------------- ---------- ------------------ ------------------ ------------------- 3.5 -.- .....------------.------. ---------- ------------------
-----------III--II
-- .4----------- ---- -------------------- ------------------- -------------------
3.0 -------I.........------.----- ---------- ------------------ ------------------ ------------------- 2.5 ---------------- ---- -- ---------- I
------------------- -------------- ----- ------------------ ---------- I......... ---------- Dowhhill 2.0 ------- ----------- ---------- ........... I------ ------------------- ----------- Side 1.5 4 1.0 -:i.......S..
- ilNg*H**
mM l .... I "no flmuamote[ g
*k=* U*kli .............
ýMmsp wkrm 1"MUNKMIUM I
Jl.. .. . *--__J P.mmum PONM "MMOM I mumov I I:i 0.5 --- - - - - -- - - - -- -I---- --- --------- -- -- - - --- i 0.0 , - I q
- _________
I 0 .5 o, . i6b " 150 200 250.. 35 0I,,
,. 7
.3grees.,- . ' ; *' , ', - ,.-=;
-2 - 3 4
-5 - 6 -7 11 -8
,. - 9 -. 10 ----..... . 12
. ,13 14 15 16
--, Noz.End ""=="kIUphill / Downhill demarcation 5:05 PM9/23/02 Data Sheet -Vent Line Chart 1 Pg 2 of Page o2,f 2}}
Text
{{#Wiki_filter:Nuclear Management Company, LLC Point Beach Nuclear Plant NMC Committed to NuclearExcellence 6610 Nuclear Road Two Rivers, WI 54241 NRC 2002-0102 10 CFR 50.54(f) November 15, 2002 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555 Docket 50-266 Point Beach Nuclear Plant (PBNP), Unit 1 Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings On August 3, 2001, the Nuclear Regulatory Commission (NRC) transmitted Bulletin (BL) 2001-01, "Circumferential Cracking of Reactor Pressure Vessel Head Penetration Nozzles." On March 18, 2002, the NRC transmitted BL 2002-01, "Reactor Pressure Vessel Head Degradation and Reactor Coolant Pressure Boundary Integrity." On August 9, 2002, the NRC transmitted BL 2002-02, "Reactor Pressure Vessel Head and Vessel Head Penetration Nozzle Inspection Programs." In BL 2001-01 the NRC requested addressees provide within 30 days after plant restart following the next refueling outage; a description of the extent of any vessel head penetration nozzle leakage and cracking detected, including the number, location, size, and nature of each crack detected. Furthermore, if cracking is detected, the report is required to include a description of the inspections, repairs, and other corrective actions taken to satisfy applicable regulatory requirements. In BL 2002-01 the NRC requested addressees provide within 30 days after plant restart following the next inspection of the reactor pressure vessel head; the inspection scope (if different than that provided in response to BL 2002-01, Item 1 .D) and results, including the location, size and nature of any degradation detected. Furthermore, the report is required to include the corrective actions taken and the root cause of the degradation. In BL 2002-02 the NRC requested addresses provide within 30 days after plant restart following the next inspection of the reactor pressure vessel head and vessel head penetration nozzles; the inspection scope and results, including the location, size, extent, and nature of any degradation (e.g., cracking, leakage, and wastage) that was detected. Furthermore, the report is required to include details of the non-destructive examination (NDE) used (i.e., method, number, type, and frequency of transducers or transducer packages, essential variables, equipment, procedure and personnel qualification requirements, including personnel pass/fail criteria), and criteria used to determine whether an indication, "shadow," or "backwall anomaly" is acceptable or rejectable.
NRC 2002-0102 Page 2 On October 16, 2002, Nuclear Management Company, LLC (NMC) completed its most recent refueling outage of Point Beach Nuclear Plant (PBNP) Unit 1. Attached to this letter is a discussion of the inspection scope and results, details of the NDE used, and the acceptability of the limited ultrasonic testing (UT) examinations performed on four of the forty-nine penetrations. Additionally, Westinghouse Electric Company performed a probabilistic analysis to determine whether the inspection results to date on PBNP Unit 1 control rod drive mechanism (CRDM) penetrations provide a risk-informed basis for pursuing a return to power. Proprietary and non-proprietary versions of the probabilistic analysis are provided in Enclosures 1 and 2, respectively. Both reports in Enclosures 1 and 2 are titled, "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations." Enclosed in this letter is a Westinghouse authorization letter, CAW-02-1559 (Enclosure 3), an accompanying affidavit (Enclosure 4), Proprietary Information Notice (Enclosure 5), and Copyright Notice (Enclosure 6). As Enclosure 1 contains information proprietary to Westinghouse Electric Company, it is supported by an affidavit signed by Westinghouse, the owner of the information. The affidavit sets forth the basis on which the information may be withheld from public disclosure by the Commission and addresses with specificity the considerations listed in paragraph (b) (4) of 10 CFR 2.790 of the Commission's' regulations. Accordingly, it is respectfully requested that the information which is proprietary to Westinghouse be withheld from public disclosure in accordance with 10 CFR 2.790 of the Commission's' regulations. Correspondence with respect to the copyright or proprietary aspects of the items listed above or the supporting Westinghouse Affidavit, should reference CAW-02-1559 and should be addressed to H. A. Sepp, Manager of Regulatory and Licensing Engineering, Westinghouse Electric Company, P.O. Box 355, Pittsburgh, Pennsylvania 15230-0355. to this letter contains the nozzle 1 examination results as presented in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This letter contains no new commitments and no revisions to existing commitments. I declare under penalty of perjury that the foregoing is true and accurate. Executed on November 15, 2002. RDS/kmd
NRC 2002-0102 Page 3
Attachment:
PBNP Unit 1 RPV Head and VHP Nozzle Inspection Discussion
Enclosures:
1 - "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations", (Proprietary) 2 - "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations", (Non-Proprietary) 3 - Westinghouse Proprietary Authorization Letter, CAW-02-1559 4 - Westinghouse Affidavit 5 - Westinghouse Proprietary Information Notice 6 - Westinghouse Copyright Notice 7 - "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report" cc (with enclosures): Project Manager, PBNP, USNRC, NRR cc (without enclosures): Regional Administrator, USNRC, Region III NRC Resident Inspector- PBNP
ATTACHMENT To Letter from A. J. Cayia (NMC) to Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01. 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings PBNP Unit 1 RPV Head and VHP Nozzle Inspection Discussion
NRC 2002-0102 Attachment "Page 2 PBNP Unit 1 Inspection Scope and Results Visual Examinations An above-head bare metal visual examination was performed on 100% of the surface area surrounding the PBNP Unit 1 vessel head penetrations (VHP). The examination was performed as described in the revised Nuclear Management Company, LLC (NMC) response to BL 2002-01, Item 1 .D, dated April 18; 2002. The examination resulted in an effective visual examination that revealed no evidence of boric acid deposition or wastage of the reactor pressure vessel (RPV)
'head. All RPV head penetrations were examined with no limitations or masking.
On April 2, 2002 the NMC provided the requested response to NRC BL 2002-01. On April 18, 2002 the NMC provided a revised response to NRC BL 2002-01. In each of these letters the NMC described a small area of apparent wastage on the PBNP Unit 1 RPV-head that occurred in the early 1970's. The description of the affected area on the RPV head was obtained from a first hand. account by an NMC staff member who was involved in repair of the RPV head insulation at the time of discovery. This area was searched for during the above-head bare metal visual examination performed on the PBNP Unit 1 RPV head during the most recent refueling outage. No evidence of the RPV head wastage described above was identified. Ultrasonic Examinations In addition to the above-head bare metal visual examination, ultrasonic examinations (UT) of the nozzle base material were performed. These examinations were performed as described in our response to BL 2002-02, Item 1 .A, dated September 12, 2002. The UT also included a "leak path" examination of each nozzle. All UT and "leak path" examinations revealed no evidence of cracking' or leakage. All nozzles without thermal sleeves (16) were examined using a rotating probe UT technique. The remaining penetrations containing thermal sleeves (33) were examined using a blade probe UT technique. -The initial blade probe UT examination of the nozzle 1 base material revealed several recordable indications.- The nozzle 1 thermal sleeve was removed to initiate repairs'and a 100% rotating UT
-was performed. Multiple transducers from both the axial and circumferential beam directions interrogated these indications during the rotating UT examination. The rotating UT results demonstrated that the indications were embedded flaws resulting from original construction J groove welding processes. These results were confirmed with the performance of two separate'
-liquid penetrant (PT) examinations. The initial UT indications seen were concluded to be a result of manufacturing defects and are not related to primary water stress cracking corrosion (PWSCC). No repairs were performed and the thermal sleeve was reattached. The nozzle 1 examination results are contained in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This report is contained in Enclosure 7. During the performance of the UT examination seven (7) penetrations with thermal sleeves initially had limitations in inspection coverage. In order to provide access to increased examination area, three (3) thermal sleeves were removed and rotating UT examinations were performed. The remaining four (4) nozzles had minor limitations in coverage as shown in Table 1. No shadow or backwall anomaly indications were identified during the performance of these examinations.
NRC 2002-0102 Attachment Page 3 Table 1 Inspection Summary Penetration(s) Coverage Description 1 100% Indications of possible fabrication-related flaw indications found through blade probe UT examination. Thermal sleeve removed to initiate repairs. 100% rotating UT performed with sleeve removed. Indications determined to be weld fabrication-related with the more accurate rotating probe UT. No indications found with confirmatory PT examination. No repairs required. Thermal sleeve reinstalled. 2-25 100% No indications. No restrictions or limitations. 26 78% No indications. Limited coverage justified through engineering analysis. 27 66% No indications. Limited coverage justified through engineering analysis. 28 52% No indications. Limited coverage justified through engineering analysis. 29 100% No indications. No restrictions or limitations. 30 50% No indications. Limited coverage justified through engineering analysis. 31 -33 100% Very limited coverage using blade probe due to physical restrictions. Thermal sleeves removed. 100% coverage obtained through use of rotating UT probe. Nozzle 32 had weld fabrication-related indications only. No flaw indications. Thermal sleeve installed. 34-49 100% No indications. No restrictions or limitations. The individual examination summary charts for nozzles 26, 27, 28 and 30 are located in Figures 1 through 4. The limited coverage on these nozzles was found to be acceptable through performance of engineering evaluations. These evaluations are described later in this document. Circ5 Axia'l Examhination Percentage 'Nozzle.J Area .;'-Length Length '78% 26 Area of Interest 0-3600 0 -6.56" Area Examined 0-2170 0-6.6" Area Not Examined 218-3060 0-6.5" Area Examined 307-3600 0-6.6" 270 d..$ Figure 1 - Nozzle 26 UT Exam Coverage
NRC 2002-0102 Attachment Page 4 Cire Examnina'tion 'Pecetg Nozzle Area, Length Axial Length 660%6 27 Area of Interest 0-3600 0 -6.56" Area Examined 0-1730 0-8.7" Area Not Examined 174-2050 0-6.5" Area Examined 206-2100 0-8.7" Area Not Examined 211-236c 0-6.56" ,o., Area Examined 237-2630 0-8.7" Area Not Examined 264-3320 0-6.56" Area Examined 333-3600 0-8.7" Figure 2 - Nozzle 27 UT Exam Coverage Cire' Axial 7..Examihnati6n Percentage -Nozzle Area Length ~:~Lenith ,. 52%, 28 Area of Interest 0-3600 0 -6.56" Area Examined 0-890 0-8.6" Area Not Examined 90-2610 0-6.56" Area Examined 262-3600 0-8.6" Figure 3 - Nozzle 28 UT Exam Coverage Circ Examiniation Per&entage ,Nozzle. Area "Lgh Aia Length , 50%, 30 Area of Interest 0-3600 0 -6.56" Area Examined 0-890 0-8.6" Area Not Examined 90-1300 0-6.56" Area Examined 131-2390 0-8.6" Area Not Examined 240-3600 0-6.56" 180* Figure 4 - Nozzle 30 UT Exam Coverage
NRC 2002-0102 Attachment Page 5 Liquid Penetrant Examinations As discussed previously, two separate liquid penetrant (PT) examinations were performed on the nozzle 1 J-groove wetted surface to characterize suspected UT indications found during initial blade probe UT examinations. The PT examinations revealed no crack indications. These results were in agreement with no indications found in separate rotating UT examinations following removal of the thermal sleeve. The initial UT indications seen were concluded to be a result of manufacturing defects and are not related to PWSCC. Acceptability of Limited UT Examination of Nozzles 26, 27, 28, and 30 As shown in Table 1, four (4) nozzles (26, 27, 28 and 30) received a UT examination of less than 100% coverage. These limited examinations have been found to be acceptable. This section describes that justification. Flaw Tolerance Evaluation Circumferential cracks located in the nozzle material are the area of prime interest due to the safety concern arising from nozzle ejection and LOCA. Therefore, a flaw tolerance evaluation, postulating a circumferential flaw in the region that was not interrogated by the UT examination was performed by Westinghouse Electric Company. The postulated flaw in this evaluation corresponds to 1800 and is consistent with the limitations documented in Figures 1 through 4. Figure 5 illustrates the time required for a postulated 1800 circumferentially oriented flaw to grow to a point of structural instability (3300) to be approximately 25 years of operation. Figure 5 is plotted as half the length of the circumferential flaw. This accounts for both ends of the flaw to growing equally. The evaluation uses plant specific stresses and operating temperature and the MRP-55 crack growth rate predictions. Based on the UT inspection results and this evaluation, there are no concerns with the structural integrity of the VHPs associated with the possibility of undetected circumferential cracking in the non-inspected areas over at least the next operating cycle. Proprietary and non-proprietary versions of the flaw tolerance evaluation (WCAP-1 4000 and WCAP-1 5950, respectively), were transmitted to the NRC by Westinghouse Electric Company on September 27, 2002.
NRC 2002-0102 Attachment Page 6 180.0o ! I I I 15000
=' 1200 - --
< ~~~CRI M N-1z. J 1 90.0 UI A I 860.0/
F ----
,,lI Service Life > 24
- 30.0,-/
00 0 10 20 30
- 40 50 period (year)
Figure 5 - Crack Growth Predictions for Circumferential Through-Wall Cracks Probabilistic Evaluation In addition to the work described above, Westinghouse Electric Company performed a probabilistic analysis. This work determined, with at least 95% confidence, that the seven penetrations with initial limitations in examination coverage would not produce an axial or circumferential flaw that would exceed the assumed critical sizes over a time interval of up to 14.5 additional effective full power years (EFPYs). This conclusion was based on conservative assumptions in average crack size, stresses influencing crack growth, and inspections performed to date. Proprietary and non-proprietary versions of the probabilistic analysis are provided in Enclosures 1 and 2, respectively. The results of the probabilistic analysis were then evaluated using the plant specific probabilistic risk assessment (PRA) to determine the potential risk significance of this activity. NMC conservatively postulated that a critical failure would lead to a medium loss of coolant accident (LOCA) with an equivalent diameter of more than 2 inches. The corresponding change in core damage frequency for this scenario was calculated to be less than 1E-6/year. These results demonstrate a very small change in plant risk and are consistent with the guidance contained within Regulatory Guide 1.174. 100% Visual and Other UT Examinations The detailed 100% UT examinations of 45 of the 49 CRDM nozzles and of the RPV head vent line, with no evidence of cracking or leakage, give assurance that PWSCC of the PBNP Unit 1 VHPs is not occurring. This is also evident in the results of the 100% visual examination performed on the RPV head exterior surface. These inspections support the evaluations previously discussed and give NMC confidence in the structural integrity of all PBNP Unit 1 VHP nozzles (including nozzles 26, 27, 28, and 30).
NRC 2002-0102 Attachment Page 7 NDE Methods and Qualifications All NDE personnel involved in these examinations and data analysis activities were certified as Level II or Level III NDE inspectors in accordance with their employer's written practices. Personnel certifications were reviewed and approved by the PBNP Level III prior to personnel performing examinations. Visual Examinations The above-head visual examinations (VT) were performed directly by qualified examiners. Additionally, a remote hand-held camera was used to record the examination images onto VCR tape. The procedures used in these VT examinations were qualified in accordance with the employer's written practices, ASME Section XI, and supplemented by'EPRI Report 1006296, Revision 1, 'Visual Examination for Leakage of PWR Reactor Head Penetrations on Top of RPV Head." Ultrasonic Examinations The detailed method of UT examinations performed is contained in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This non-proprietary report describes the number, type and frequency of transducers, essential variables, equipment, and procedures. This report is contained in . A qualification program similar to the ASME Section XI, mandatory Appendix VIII, "Performance Demonstration For Ultrasonic Examination Systems," does not exist for UT testing of the VHP nozzle base material. Framatome ANP was the vendor that performed UT examinations during this most recent PBNP Unit 1 outage. As part of the EPRI MRP, Framatome ANP recently participated in a demonstration of the UT techniques used for detection of axial and circumferentially oriented flaws in the RPV head penetration tube material. These techniques and capabilities were demonstrated in blind testing that was attended by NRC reviewers. Framatome ANP has recently developed the "leak path" UT technique used in the PBNP Unit 1 examinations. It is a proprietary technique that has no formal qualification program. The "leak path" UT technique uses empirical data from the examination of approximately 270 nozzle penetrations. In examinations of VHPs since March 2001 with known bare metal visual leakage where the interference fit has been scanned, a UT "leak path" has been observed. Framatome has presented the "leak path" UT technique to the NRC for review on several occasions. The technical basis of this technique is described in a Framatome ANP proprietary document entitled, "Reactor Vessel Head Penetration Leak Path Qualification Report," dated February 6, 2002. Liquid Penetrant Examinations All personnel and procedures involved in the PT examinations were qualified in accordance with ASME Sections V and XI. The first PT was performed to the Framatome ANP procedure 54-ISI-244-06, "Liquid Penetrant Examination of Reactor Vessel Head Penetration from the Inside Surface." The second PT was performed to PBNP procedure NDE-451, "Liquid Penetrant Examination Temperature Applications 45 OF to 125 OF."
ENCLOSURE 2 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations" (Non-Proprietary)
Westinghouse Non-Proprietary Class 3 Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations
In its Fall outage of 2002, Point Beach Unit 1 Nuclear Power Plant attempted to inspect all 49 of its control rod drive mechanism (CRDM) penetrations but could not provide 100% inspection coverage of 7 of the penetrations. The purpose of the work documented in this letter report is to provide a probabilistic analysis to determine whether the inspection results to date on Point Beach Unit 1 CRDM penetrations can provide a risk-informed basis for pursuing a contemplated return to power, with inspections of the 7 partially examined penetrations at a future outage. Summary of Approach: The approach is to first establish the maximum number of axial and circumferential flaws that may be left in the base metal of the tubing for the 7 partially-inspected Unit 1 CRDM penetrations with 95% confidence that no one flaw will exceed the pertinent critical flaw size during the desired time interval. This calculation uses a probabilistic model derived from extreme value theory, with values for inputs (critical sizes and crack growth rates) taken from a recently-completed structural reliability study for Point Beach units 1 and 2 (WCAP14000). The maximum allowable number is then compared with the upper 95% confidence value on flaws projected to currently be in Unit l's set of CRDM penetrations based on a simple statistical evaluation of sample inspections to date. If the maximum allowable flaw number exceeds the upper confidence limit number, then it can be claimed with at least 95% confidence that the plant can return to power and operate for the contemplated interval without a flaw in the subject unit's CRDM penetrations progressing to its critical size. Summary of Results: Using this approach, the analysis concludes, with at least 95% confidence, that the 7 incompletely inspected penetrations of interest will not produce an axial or circ flaw that will exceed the assumed critical sizes over a time interval of up to 14.5 additional effective full power years (EFPY). This conclusion is based on conservative assumptions as to average crack size, to stresses influencing crack growth, and to inspections performed to date. Specifically, the distribution of flaws remaining in the 7 penetrations is assumed to have a mean depth of "through wall" with a length of 3 inches. Cracks grow at a rate consistent with the most stressed (outer layer) of the CRDM penetrations. No credit is taken for partial inspections. It should be noted, however, that no welds were inspected and no inferences are made here about weld integrity. Descriotion of the Work Performed (a, c)
Results Equation (2) is used to calculate the probability of the ith flaw in each sub-lot reaching full critical length (Table 2) within operating intervals ranging from 1 to 15 effective full power years for axial
and circ flaws. Equation (5) uses the probabilities in Table 2 and the target reliabilities of 95% to calculate the allowable number of flaws in the 7 penetrations for operating intervals out to 15 additional ("Target") EFPY shown in Table 3. Comparing Table 3 to the upper confidence number of 1 calculated above, the circ cracks limit the number of additional EFPY that Point Beach Unit 1 can go without inspecting the 7 subject penetrations to 14.5 EFPY. That is, at 14.5 additional EFPY the number of allowable leaks just matches the number of circ flaws that we are 95% confident will not be exceeded. We can thus say with at least 95% confidence that the 7 partially inspected penetrations will not generate a critical axial or circ flaw over a future ranging up to 14.5 EFPY. Table 2" Probability ith Flaw > Critical Length Before Target EFPY Target EFPY Axial Circ 1 1.16E-04 1.80E-03 1.5 1.78E-04 2.76E-03 2 2.43E-04 3.76E-03 2.5 3.1OE-04 4.80E-03 3 3.81 E-04 5.88E-03 3.5 4.55E-04 7.01E-03 4 5.32E-04 8.18E-03 4.5 6.12E-04 9.41E-03 5 6.96E-04 1.07E-02 5.5 7.84E-04 1.20E-02 6 8.76E-04 1.34E-02 6.5 9.71E-04 1.48E-02 7 1.07E-03 1.63E-02 7.5 1.18E-03 1.79E-02 8 1.28E-03 1.95E-02 8.5 1.40E-03 2.12E-02 9 1.52E-03 2.29E-02 95 1.64E-03 2.48E-02 10 1.77E-03 2.67E-02 10.5 1.91E-03 2.87E-02 11 2.05E-03 3.07E-02 11.5 2.20E-03 3.29E-02 12 2.35E-03 3.51E-02 12.5 2.51E-03 3.75E-02 13 2.68E-03 3.99E-02 13.5 2.86E-03 4.25E-02 14 3.04E-03 4.51E-02 14.5 3.24E-03 4.78E-02 15 3.44E-03 5.07E-02
Table 3. Allowable Number of Flaws @ 100% Criticsel Size 17 Tuibes* Target EFPY Axial Circ 1 7.0 7.0 1.5 7.0 7.0 2 7.0 7.0 2.5 7.0 7.0 3 7.0 7.0 3.5 7.0 7.0 4 7.0 6.2 4.5 7.0 5.4 5 7.0 4.8 5.5 7.0 4.2 6 7.0 38 6.5 7.0 3.4 7 7.0 3.1 7.5 7.0 2.8 8 7.0 2.6 8.5 7.0 2.4 9 7.0 2.2 9.5 7.0 2.0 10 7.0 1.9 10.5 7.0 1.8 11 7.0 1.6 11.5 7.0 1.5 12 7.0 1.4 12.5 7.0 1.3 13 7.0 1.3 13.5 7.0 1.2 14 7.0 1.1 14.5 7.0 1.0 15 7.0 1.0 Addendum on Use of Table 2 in a Reaulatorv Guide 11 174 Analysis Addendum on Use of Table 2 in a Reoulatorv Guide 174 Analvqis Regulatory Guide 1.174 suggests that a contribution to plant risk is "small" if (1) the contribution to plant CDF is no more than IE-6, and (2) the contribution to plant LERF risk is no more than lE-7. The probabilities in Table 2 cannot be used in to support a Regulatory Guide 1.174 risk analysis without first accounting for the likelihood of the ith tube having a leak now. Using only the sample information from Point Beach Unit l's latest inspection and, in Bayesian terms, assuming a "prior" uniform distribution between 0 and 1 on the probability that any one penetration would have a leak, it can be shown that the mean or expected value of the subject probability (now treated as a random variable) is (Martz and Waller, page 257),
(6) p= x+1 n1+2 where x = the number of leaks found in the inspections and n = the number of penetrations inspected. Using the same value (43) as before and setting x equal to zero, the estimated value for the probability that a given penetration would have a leak is 1/(43+2) = 0.022. If the latter is taken as the probability that a penetration will have a through wall circ leak of average size assumed in calculating Table 2 (i.e., 3 inches), then the unconditional probability that the ith penetration will have a critical circ leak by, say, 1.5 Target EFPY is 0.022*2.76E-3 = 6.14E-5, (where the 2.76E-3 comes from Table 2). One further note. The Regulatory Guide 1.174 criteria are expressed in terms of frequency of event per reactor year. The probability of the ith penetration leaking over multiple years must therefore be converted to an equivalent per year basis. References Bain, L. J., Statistical Analysis of Reliability and Life Testing Models, Marcel Dekker, Inc., 1978. Bamford, W. H., and D. Tang, "Structural Integrity Evaluation of Reactor Vessel Upper Head Penetration to Support Continued Operation: Point Beach Units 1 and 2," Westinghouse Proprietary document (WCAP-14000), Revision 1, September 2002. Cunningham, M. A., "Statistical Analysis of CRDM Sampling (Revision)", memo of August 17, 2001 to W. H. Bateman, Office of Nuclear Reactor Regulation, Nuclear Regulatory Commission. Kapur, K. C., and L. R. Lamberson, Reliability in Engineering Design, John Wiley and Sons, 1977. Martz, H. F., and R. A. Waller, Bayesian Reliability Analysis, Krieger Publishing Co., 1991. Tomes, C. A., "Probability of Not Detecting a Flaw in Unexamined Penetrations," email to Warren Bamford, September 30, 2002. U.S. Nuclear Regulatory Commission Regulatory Guide 1.174, "An Approach to Using PRA in Risk-Informed Decisions on Plant-Specific Changes to the Licensing Basis," July 1998.
ENCLOSURE 3 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Proprietary Authorization Letter, CAW-02-1559
Westinghouse Westinghouse Electric Company Nuclear Services P.O Box 355 Pittsburgh, Pennsylvania 15230-0355 USA U.S. Nuclear Regulatory Commission Directtel: (412) 374-5282 Document Control Desk Direct fax: (412) 374-4011 Washington, DC 20555-0001 e-mail: Sepplha@westinghouse.com Attention: Mr. G. Shukla Our ref: CAW-02-1559 October 11, 2002 APPLICATION FOR WITHHOLDING PROPRIETARY INFORMATION FROM PUBLIC DISCLOSURE
Subject:
Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations (Final - Proprietary Version);
Dear Mr. Shukla:
The proprietary information for which withholding is being requested in the above-referenced report is further identified in Affidavit CAW-02-1559 signed by the owner of the proprietary information, Westinghouse Electric Company LLC. The affidavit, which accompanies this letter, sets forth the basis on which the information may be withheld from public disclosure by the Commission and addresses with specificity the considerations listed in paragraph (b)(4) of 10 CFR Section 2.790 of the Commission's regulations. Accordingly, this letter authorizes the utilization of the accompanying Affidavit by Nuclear Management Company. Correspondence with respect to the proprietary aspects of the application for withholding or the Westinghouse affidavit should reference this letter, CAW-02-1559 and should be addressed to the undersigned. Very truly yours, H. A. Sepp, M nager Regulatory and Licensing Engineering Enclosures Cc: G. Shukla/NRR A BNFL Group company
ENCLOSURE 4 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Affidavit
CAW-02-1559 AFFIDAVIT COMMONWEALTH OF PENNSYLVANIA: ss COUNTY OF ALLEGHENY: Before me, the undersigned authority, personally appeared H. A. Sepp, who, being by me duly sworn according to law, deposes and says that he is authorized to execute this Affidavit on behalf of Westinghouse Electric Company LLC ("Westinghouse"), and that the averments of fact set forth in this Affidavit are true and correct to the best of his knowledge, information, and belief:
'a1 H. A. Sepp, Manager ........ Regulatory and Licensing Engineering 1'; ,git" Sworn to and subscribed before me this /1'.* day of ef ? ,2002 Notary Public Nota Sea]
Margaret L Gonano, Notary Pubric Monhvevile Boro, .Aeghe**y County My Comiso Exprem Jan. 3,2006 Member. Pennelivania Assodabn Of Notarfte
2 CAW-02-1559 (1) 1 am Manager, Regulat6ry and Licensing Engineering, in Nucleai- Services, Westinghouse Electric Company LLC ("Westinghouse"), and as such, I have been specifically delegated the function of reviewing the proprietary information sought to be withheld from public disclosure in connection with nuclear power plant licensing and rule making proceedings, and am authorized to apply for its withholding on behalf of the Westinghouse Electric Company LLC. (2) I am making this Affidavit in conformance with the provisions of 10CFR Section 2.790 of the Commission's regulations and in conjunction with the Westinghouse application for withholding accompanying this Affidavit. (3) I have personal knowledge of the criteria and procedures utilized by the Westinghouse Electric Company LLC in designating information as a trade secret, privileged or as confidential commercial or financial information. (4) Pursuant to the provisions of paragraph (b)(4) of Section 2.790 of the Commission's regulations, the following is furnished for consideration by the Commission in determining whether the information sought to be withheld from public disclosure should be withheld. (i) The information sought to be withheld from public disclosure is owned and has been held in confidence by Westinghouse. (ii) The information is of a type customarily held in confidence by Westinghouse and not customarily disclosed to the public. Westinghouse has a rational basis for determining the types of information customarily held in confidence by it and, in that connection, utilizes a system to determine when and whether to hold certain types of information in confidence. The application of that system and the substance of that system constitutes Westinghouse policy and provides the rational basis required. Under that system, information is held in confidence if it falls in one or more of several types, the release of which might result in the loss of an existing or potential competitive advantage, as follows: (a) The information reveals the distinguishing aspects of a process (or component, structure, tool, method, etc.) where prevention of its use by any of
3 CAW-02-1559 Westinghouse's competitors without license from Westinghouse constitutes a competitive economic advantage over other companies. (b) It consists of supporting data, including test data, relative to a process (or component, structure, tool, method, etc.), the application of which data secures a competitive economic advantage, e.g., by optimization or improved marketability. (c) Its use by a competitor would reduce his expenditure of resources or improve his competitive position in the design, manufacture, shipment, installation, assurance of quality, or licensing a similar product. (d) It reveals cost or price information, production capacities, budget levels, or commercial strategies of Westinghouse, its customers or suppliers. (e) It reveals aspects of past, present, or future Westinghouse or customer funded development plans and programs of potential commercial value to Westinghouse. (f) It contains patentable ideas, for which patent protection may be desirable. There are sound policy reasons behind the Westinghouse system which include the following: (a) The use of such information by Westinghouse gives Westinghouse a competitive advantage over its competitors. It is, therefore, withheld from disclosure to protect the Westinghouse competitive position. (b) It is information that is marketable in many ways. The extent to which such information is available to competitors diminishes the Westinghouse ability to sell products and services involving the use of the information. (c) Use by our competitor would put Westinghouse at a competitive disadvantage by reducing his expenditure of resources at our expense.
4 CAW-02-1559 (d) Each component of proprietary information pertinent to a particular competitive advantage is potentially as valuable as the total competitive advantage. If competitors acquire components of proprietary information, any one component may be the key to the entire puzzle, thereby depriving Westinghouse of a competitive advantage. (e) Unrestricted disclosure would jeopardize the position of prominence of Westinghouse in the world market, and thereby give a market advantage to the competition of those countries. (f) The Westinghouse capacity to invest corporate assets in research and development depends upon the success in obtaining and maintaining a competitive advantage. (iii) The information is being transmitted to the Commission in confidence and, under the provisions of 10CFR Section 2.790, it is to be received in confidence by the Commission. (iv) The information sought to be protected is not available in public sources or available information has not been previously employed in the same original manner or method to the best of our knowledge and belief. (v) The proprietary information sought to be withheld in this submittal is that which is appropriately marked in the report, "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations," (Proprietary), being transmitted by the Nuclear Management Company letter and Application for Withholding Proprietary Information from Public Disclosure, to the Document Control Desk, Attention Mr. G. Shukla. The proprietary information as submitted for use by Westinghouse Electric Company LLC for Point Beach Unit 1 is expected to be applicable for other licensee submittals in response to certain NRC requirements for justification of continued safe operation of Point Beach Unit 1. This information is part of that which will enable Westinghouse to: (a) Assess the risk with unexamined CRDM penetrations.
5 CAW-02-1559 (b) Assist the customer in obtaining NRC approval. Further this information has substantial commercial value as follows: (a) Westinghouse plans to sell the use of similar information to its customers for purposes of meeting NRC requirements for licensing documentation. (b) Westinghouse can sell support and defense of continued safe operation with the presence of cracks in a control rod drive head penetration. (c) The information requested to be withheld reveals the distinguishing aspects of a methodology which was developed by Westinghouse. Public disclosure of this proprietary information is likely to cause substantial harm to the competitive position of Westinghouse because it would enhance the ability of competitors to provide similar support documentation and licensing defense services for commercial power reactors without commensurate expenses. Also, public disclosure of the information would enable others to use the information to meet NRC requirements for licensing documentation without purchasing the right to use the information. The development of the technology described in part by the information is the result of applying the results of many years of experience in an intensive Westinghouse effort and the expenditure of a considerable sum of money. In order for competitors of Westinghouse to duplicate this information, similar technical programs would have to be performed and a significant manpower effort, having the requisite talent and experience, would have to be expended. Further the deponent sayeth not.
ENCLOSURE 5 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Proprietary Information Notice
, C CAW-02-1559 PROPRIETARY INFORMATION NOTICE Transmitted herewith are proprietary and/or non-proprietary versions of documents furnished to the NRC in connection with requests for generic and/or plant-specific review and approval. In order to conform to the requirements of 10 CFR 2.790 of the Commission's regulations concerning the protection of proprietary information so submitted to the NRC, the information which is proprietary in the proprietary versions is contained within brackets, and where the proprietary information has been deleted in the non-proprietary versions, only the brackets remain (the information that was contained within the brackets in the proprietary versions having been deleted). The justification for claiming the information so designated as proprietary is indicated in both versions by means of lower case letters (a) through (f) located as a superscript immediately following the brackets enclosing each item of information being identified as proprietary or in the margin opposite such information. These lower case letters refer to the types of information Westinghouse customarily holds in confidence identified in Sections (4)(ii)(a) through (4)(ii)(f) of the affidavit accompanying this transmittal pursuant to 10 CFR 2.790(b)(1).
ENCLOSURE 6 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findin-qs Westinghouse Copyright Notice
CAW-02-1559 COPYRIGHT NOTICE The reports transmitted herewith each bear a Westinghouse copyright notice. The NRC is permitted to make the number of copies of the information contained in these reports which are necessary for its internal use in connection with generic and plant-specific reviews and approvals as well as the issuance, denial, amendment, transfer, renewal, modification, suspension, revocation, or violation of a license, permit, order, or regulation subject to the requirements of 10 CFR 2.790 regarding restrictions on public disclosure to the extent such information has been identified as proprietary by Westinghouse, copyright protection notwithstanding. With respect to the non-proprietary versions of these reports, the NRC is permitted to make the number of copies beyond those necessary for its internal use which are necessary in order to have one copy available for public viewing in the appropriate docket files in the public document room in Washington, DC and in local public document rooms as may be required by NRC regulations if the number of copies submitted is insufficient for this purpose. Copies made by the NRC must include the copyright notice in all instances and the proprietary notice if the original was identified as proprietary.
ENCLOSURE 7 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report"
A FRAMATOME ANP 0 Point Beach Aý 7-I ftubqw October 5, 2002 Revision 0 Prepared by: Date: 10/5/02 M. W. Key, UT-Level IIISC
A FRAMATOME ANP Record of Revision Revision 0 Initial issue 2
A FRAMATOME ANP EXAMINATION
SUMMARY
Automated ultrasonic examinations of 49 CRDM nozzles and vent line nozzle were performed on the Point Beach Unit 1 Reactor Vessel Head. The examinations were conducted from beneath the head using the SUMO Rocky manipulator, USA Blade Tool, and Bottom Up Rotating Tool. Framatome ANP examination procedure 54-ISI 100-09, "Remote Ultrasonic Examination 'of Reactor Head Penetrations" was used to perform the examination that governs the remote automated contact ultrasonic examination of CRDM nozzles using the ACCUSONEXTM automated data acquisition and analysis system. The techniques utilized for this examination are intended for the detection and through wall (depth) sizing of axial and circumferential IDand OD initiating flaws greater than
.079" (2 mm) in the nozzle base metal only. In addition, leak path techniques were employed for the detection of fluid flow on the nozzle OD surface above the J-groove weld. Forward scatter (TOFD) longitudinal-wave and backward scatter shear wave techniques are used. The examinations were conducted from the bore of the CRDM nozzles from the bottom end of the nozzle up to a point nominally 2" above the uphill side of the nozzle J-groove weld.
The inspections consisted of scanning for axial and circumferential flaws within the nozzle. The bottom up tooling consisted of a transducer head that holds 10 individual search units. These search units were divided into two sets, one for the axial beam direction and one for the circumferential beam direction. The axial beam direction set of search units consisted of 5.0 MHz, longitudinal wave forward scatter time of flight search units with angles of 300 and 450; backward scatter pulse echo, 2.25 MHz 600 shear wave search units; and a 5.0 MHz 00 search unit. The circumferential beam direction set of search units consisted of 5.0 MHz, longitudinal wave forward scatter time of flight search units with angles of 450, 550, and 650; backward scatter pulse echo, 2.25 MHz 600 shear wave search units; and a 5.0 MHz 00 search unit. Appendix A contains printouts for system setup, calibrations files and scan parameters. The USA Blade tooling consisted of a single Circ-blade probe designed to emit ultrasound along the long axis of the nozzle. The 'axial beam search unit consisted of 5.0Mhz, longitudinal wave forward scatter time of flight search unit with an inspection angle of 500. The detection of flaw indications is based upon the expected responses for each search unit and technique. The 00 transducer provides weld position information due to lack of backwall response in the region of the flaw. The forward scatter time of flight techniques provides flaw detection and sizing information. For the forward scatter transducers, flaw detection is identified by loss of signal response either from the lateral wave or backwall responses as well as detection of crack tip diffracted responses. The 600 shear wave transducer provides detection by means of corner trap responses between the flaw and nozzle surface and sizing with tip diffracted signals. 3
A FRAMATOME ANP The bottom-up tool was positioned with the "Z" axis (axial) zeroed at the bottom of the nozzle with the positive direction extending up into the nozzle. The 'Theta" (rotational) axis was zeroed at the downhill side of the nozzle J-groove weld with. the positive direction in the counter-clockwise direction while looking up from the bottom of the nozzle (Nozzle 1 was zeroed at vessel "W" axis which is inline with the vent line nozzle). The ultrasonic data is adjusted for individual transducer offsets in the transducer head to provide actual reflector location in the nozzle. Of the 49 nozzles examined, one nozzle (1) contained a recordable fabrication indication in the nozzle wall. In most nozzles, these indications were located predominately on the downside of the weld and identified by multiple transducers from both axial and circumferential beam directions. These indications were characterized as embedded volumetric fabrication flaws resulting from the J-groove welding process. See Fiqure 1 for reporting criteria for fusion zone indications. The examination of the remaining 48 nozzles and vent line did not reveal any recordable indications. However, it was noted on the examination data sheets that fabrication type flaws were detected at the nozzle/J-groove weld fusion zone with no penetration into the nozzle. All nozzles with the exception of #26, #27, #28 and #30 received 100% coverage for the areas requiring examination as defined by the governing procedure (54-ISI-100-9). The nozzles with limited scan coverage are as follows: Circ .. Axial :ExaminationPercentage Nozzl A rea Leth Lrt7.478 26 Area of Interest 0-3600 0 -6.56" Area Examined 0-2170 0-6.6" Area Not Examined 218-3060 0-6.5" Area Examined 307-3600 0-6.6" / 4
A FRAMATOME ANP @6
.,..-'>Circ "Exkamination6Percentagez Nozzle ."Area' 'Length. 'AkiiaLength___________
0,0 27 Area of Interest 0-3600 0 -6.56" Area Examined 0-1730 0-8.7" Area Not Examined 174-2050 0-6.5" Area Examined 206-2100 0-8.7" Area Not Examined 211-236° 0-6.56", Area Examined 237-263' 0-8.7" Area Not Examined 264-332o 0-6.56" Area Examined 333-3600 0-8.7"
-~ ~~: .Cic,: Aklal; 'Examination,Percentae
'Nozzle ;ýAiea, <Leth -Lengthr -52%0 28 Area of Interest 0-3600 0 -6.56" Area Examined 0-89* 0-8.6" Area Not Examined 90-2610 0-6.56" Area Examined 262-3600 0-8.6" 2' go "gT..
Examination Percentage Na Axial Length' 50 30 Area of Interest 0-360° 0 -6.56" °,., Area Examined 0-890 0-8.6" Area Not Examined 90-1300 0-6.56" Area Examined 131-2390 0-8.6" 2"tO O.W. Area Not Examined 240-3600 0-6.56" 5
A FRAMATOM E ANP SYSTEM CALIBRATION The ultrasonic system consists of the essential equipment required to perform the examinations. The equipment for the CRDM examinations is made up of ultrasonic equipment that must be calibrated in order to provide a 'time base and amplitude response traceable to a known reference standard. The system consists of the R/D Tech pTomo, remote pulser, transducers, interconnecting cables, and the acquisition and analysis software. i Prior to the examinations, the system is calibrated using the appropriate equipment. The equipment considered as essential variables used for each examination is documented on the examination data sheet. The calibrations are established by entering transducer/application specific parameters into the acquisition program calibration setup. A dynamic scan of the calibration block is performed with the pre-established parameters. The data analyst evaluates the data from the calibration block and makes the necessary adjustments in the acquisition calibration setup to provide an accurate system calibration. Once the adjustments are made, an additional scan of the calibration block is performed, which becomes the system initial calibration. The procedure requires intermediate calibration checks to be performed periodically throughout the examinations. At the discretion of the analyst, the intervals between the calibration checks may be extended based upon continued satisfactory performance of the system. This is verified by observing the characteristics of the transducers during the examinations. The lateral wave of the TOFD transducers, the backwall responses for either the shear or longitudinal wave components of the transducers, and the signal to noise levels are used to make this evaluation. During the course of the examinations of the Midland Replacement Head CRDM nozzles, which spanned a 13-day period, the performance of each transducer was monitored during acquisition and verified by the analyst following completion of scanning of each nozzle. No system degradation was observed during the examination period, thus intermediate calibration checks were not performed. The requirement is more for security in reducing the amount of lost data if the system calibration is compromised, rather than a technical basis. A dynamic scan of the calibration block serves as the final calibration at the end of the series of examinations. The data file identification provides a date and time stamp identifying when each data acquisition is started. This time is used for tracking of the calibrations and examinations. The file designation is broken down into the following: F2179_07.52.33 Hour, minute, second Day of the year, in this case the 179th day (06/28) Year 2002 6
A FRAMATOME ANP Reporting Criteria for Fusion Zone Indications Closure Head 0.060" Nom. Weld Dilution Zone "IJ-grooveWeld CRDM Nozzle Indications detected within 0.060" of the tube OD in the weld region are reported as weld fabrication flaws in the weld. Indications greater than 0.060" from the tube OD in the region of the weld are considered recordable conditions and are reported separately on the data sheets. Those indications that are observed at depths greater than 0.060" from the tube OD are characterized as embedded volumetric weld fabrication flaws resulting from excessive localized dilution into the tube wall where slag was entrapped. Figure 1 7
A F RAMATOME ANP APPENDIX A SYSTEM SETUP. CALIBRATION RECORDS. SCAN PARAMETERS Circ Blade ProbeRecords: 8
A FRAMATOME ANP Circ Blade Probe (continued): 9
A FRAMATOME ANP I . Rotating Probe Records (ChI to 6): 10
A FRAMATOME ANP Rotating Probe (Chl to 6) (continued): 11
A FRAMATOME ANP Rotating Probe (ChI to 6) (continued): 12
A FRAMATOME ANP I Rotating Probe (ChI to 6) (continued): 13
A FRAMATOME ANP I f Rotating Probe Records (Chl to 4): 14
A FRAMATOME ANP I Rotating Probe (Chl to 4) (continued): 15
A FRAMATOME ANP Rotating Probe (Chl to 4) (continued): 4 Channel 3 not used 16
A FRAMATOMEANP Vent Line Probe Records (Chl to 5): 17
A I FRAMATOME ANP I . Vent Line Probe (Chl to 5) (continued): 18
A FRAMATOME ANP Vent Line Probe (Chl to 5) (continued): 19
L404 Q)Ii~4 ~ tI I ii-i
-e
'k, Status Summary of PBNP Unit I RV He "RDM
--,4 --
Inspections li9... _ ,_a.. -l 'O ,,. I- " .1 Zt-Pen Visual Examination PT Examination UT Examination Leak Path Source of Leak
# - - Examination 26 , iJ I Sus Lim Report NA I Report NI I- 2i Li e;'.I*Report
, _____ * ' NI II- AA0""' Lim " Report "°" NA Identified Report 27 N I . _,_ - t Al'qz c 0T (' __._.,_"_"_
29 ___ - ._.-_ / y 30 -_
' ~
~1~ , _
~ __
4 17--_ 12.4-- fr* -4' _ _ _ 31 33 32-- , A -l-14q _ -~-_ A _ _ _ 34 - -c--
-* -T,, A 't S 35 ____ ___ /t e7 It0")
6 pe 36 37 1 - - _.,, ..0..,o
. i/...4ti 38 -v!
*, I, Y_"__-
39 ii - 17
":1.127F, 40_
41 ,
"Z-LVr,1 -_
a~v2U7 42 - -- - - - ( _ 43 I 44 JA 9k ,_
" *- 'a*r P_ .- - *
'Af, ua..
4 46 47 - - I 16 A0.0' ."7. 48 - -ae1 b/, 7;,.1-. "_ VL 49 - - -I - -% I z I_ ifZ4C...- & ?o6, 191,, . c
, 11 __ _ _ _ _ _
DI T~L :-IIdI i U ra ao eAN rpos ilt ak_ 101 1)llt~L UlIoxe; Pramatome ANt' responsibility C- 110. Ck- I kc Ak * ?oTA-nP& P9o6i5 L ,C A;* ;r*-1 t, R e,-X M A -
PBNP Unit 1 RV Head CRDM Flaw Evaluation Data Pen Orientation of Flaw Location of Flaw Vertical Circ Location gf Pen Actual Flaw Sizing Source Ind ID 0 Location of Flaw Flaw Row Thick- Figure axial I circ bot ID OD_ Sub W BW WA Uphill Downhill ness A/L Depth Length Liga I I h I ratio ment A B C D E F G H I J K L M _ I I1 REFER TO Framatome ANP SPREADSHEET\,FOR DATA LOCATIONS ITEMS F, L, AND M ARE NtiriO; DATA ENTRY LOCATIONS
A FRAMATeMIA AtjIF CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: A Procedure: 54-1S1-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): End of Noz. (in.): Probe Serial No.'s: Ch i Ch 6 n/a A*I'. ati'. t6-- Ch2 n/a Ch7 - n/a 451, / , f' 3' Ch 3 f/a Ch 8 n/a Circ. Scan Start: jdeg @L J" Stop: [ Jdeg @L " Stop: Ch4 n/a Ch9 n/a Flies: Cal Block SIN: Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 C D E D E -_- - I H B _ 2
-3 -4 -5 -6 7
8 9
'10 11 12 13 14 15 16 17 Data Loc, 0 30 60 90 120 150 ISO 210 240 "270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 1240 270 300 330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. IInches MIN. Inches Comments: Measured Thickness:l G (*theta of degl with an axial position of Limited Scan? (IYN):I Analyzed by: Date: Analyzed by: Date:
9/21/0212:29 PM Data Sheet - Blade Page I of 2
A PRAMATOMC ANP Nozzle Profile DEK 15.0 I I I I I 14.5 ------ - - 4 lt
-. 7 14.0 -------- -- -------- ------------------- -7 ,
- 13. -~,;
-- --- ---------- ---------------- 44 4 13.0 ------------------ ------------------ ------------------
12.5 4----*4-4---4-4
- ----------------- 4
. 4..
4.444 j... ....... 44%-- Uphill
- , 11 '- I I -I 12.0 .4 44- -- -- -- ---------------- ------------------ Side 11.5 ------------------ ------------------ ------------------
4Z--- -4 - 444 . .4- - - - 11.0 ------------------ ------------------ ------------------ - --- 4---- - 4- .- -- - - - 4 -- - 10.5 ------------------ ------------------ ------------------ 4 4 -- 44--- -- 4 10.0 ------------------- ------------------ ---------- ------
--- -- 44---
-- -j ------ -
9.5 ------------------ ------------------ ---------- ...... 9.0 ------------------ ------------------ ------------------ 8.5 ------------------- ------------------ ------------------ In 0 8.0 ------------------ ------------------ ------------------ 7.5 ------------------ ------------------ ------------------ 7.0 ------------------ ------------------ ------------------ 6.5 4. 5 . . ... ------------------- ------------------- ------------------ 6.0 -- - - --- - - - ---
------------------- ------------------- ------------------ 44 4 .. 4 4 5.5 ------------------- ------------------ ------------------
5.0 *------------ ------------------- ------------------ ------------------ - - 4--- - - 4. *47 4' 4---.--- 4.5 -- - -- 4-r 4
-44 p 4
- - '4 444J' 4--.
'--j-j-4 4.0 j--
3.5 -- I 3.0 --vt' -- --- 4 ------------------- ------------------ ------------------ 4.444 44 44, --- 4 t.-- - -- - -- - Downhill 2.5 ----------------- ------------------ ------------------ ----
---- --- 7".,-
2.0 ---------- ------------------- ------------------ Side 1.5 ---- --- --- ------------- 1.0 ----------- 0.5 7 7 7, 0.0 . -... .- I, . m-. I-mm 4kkimlm . . 0 50 100 150 200 250 300 350 Degrees I -2 3 -4
-5 -6 -7 .8
-9 -10 11 -12
-13 ------- 14 15 -- 16 inNoz. End -11 "um-v Uphill / Downhill demarcation 12:40 PM9121/02 Data Sheet - Blade Chart 1 Page 2 of 2 1%
FRAMATOCME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 I / ' PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 r 1Reactor Head Penetration
;:RA,&MAZ0MZ .AAM Ultrasonic Examination D.ata Sheet Customer: NMC L[Plant: 8b1' B,,, l Unit:
Penetration No.: / ' Procedure: ' Equipment: Description VH# Cal. Due Date SN# gTomoscan 2z-/ 7o -n 16 Channel PiR I/N ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3-5 9 Cable Len th: 5o0 Type: iRL- I- # Intermediate Connectors: I Calibration Block: & p1//1q3v, Calibration Setup: A21'7 3
,if-7 ? 4 -
A. q qu. I, 51.
-Scan File No.: Initial Calibration File: A 4Z.
A z /L/ 5Y. 5-%I Final Calibration File: 42Z*3JL' ,,".qt Scan Start: Z = -3.t, "Scan Start: 0 =- Scan Stop: Z = /t--.//`Scan Stop: 0 ='" Index Increment: 30 Channel An le Serial No. Comments
/ 6' . 3 oq0W Z 3-3 .. 5zoZ -roF D 3 &oI0 35c0lo 4I"L,5'f I -- O,¢z
&,Cr36 1 S15& i¶'
& 0*6 36052-.
7WQ? 35101 1-D~
"` ( z) . o-S" "5"+0 Results: No Recordable Indication*s Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: / / ,Date: Reviewed by: Level: Date: -z TYPICAL DATA SHEET FIGURE 5 ;, roIAvl/ Page 31 of 32
0 A CROM NozzlA
.. - *. 1Iltrnnir
.... FY2min2finn 4**U fl2f2 4LL4 haaf 55h Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 " Nozzle: -I Procedure: 54-ISi-100-09 INozzle Dimensions: (is.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch 1 35044 Ch 6 35052
- i-'t ?A; e ,-Stb p: 01,, , ,..'S~ tui:I ." Ch2 35202 Ch7 35202 4$-,* *,Ch 3 35070 Ch8 35070 Circ. Scan Start:L[ sJdeg @1 -3.6 " stop:I 365 Ideg @1 1641j' Setup: 1* Ch4 35044 Ch9 not active Files: A2273_14.54.39 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 35048 Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI -
2 3 4
-6 7
9 10 11 12 13 14 15 18 17
-w Data Loc. 0 30 60 90 120 150 180 210 240 270 1300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 1.50 180 1 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 _ 0.00 0.00 ...0.00 0.00 0.00
_ _ 0.00 Inches MAX. 2 87 2.71 2.78 2.75 2.82 2.83 2.80 2.79 2.81 2.82 2.74 2.80 2 80 Inches MIN. 1.66 1.59 1.57 1.57 1.57 1.58 1.55 1.3 1.58 1 61 1.62 1.64 1.59 Inches Comments: Measured Thickness:, 0,625 @theta of 2*0'31 dogewith an axial position of 1.041 Limited Scan? (YIN): n '6 degjree data position aligns with 0 or W axis &Venthine Analyzed by: ,,, Date: /*;O ...... Analyzed by: "/,q/ Date: "/*,I 10/31021:04 PM Nozz 1 rotating 10131021:04~~~~~h PMNz ZoaigPg Page I of 2 f
N7 ZJ1 Z ? 6 ed I. 1IMtD 6ulleloi I- flO' ZOICIOLýV'Jd 6Z:Lý 4 Nq vi-R
~'~,t" 3~a:!a-~
3'-4a- g". i"- .9991 ea~ai13~ 3 ' aaa~~a~~a~a4. 4 ~~~ aa K O~iO aa ~.t'aa a't ~33' a-3- a#a3aa3aaaaa; ~ "'~ p
.Va~-
O 3 aaa~a?
-:4~09 me i I (a .3, a) Aaa- a-s a a 3'a a - a aa- 4 'a a-' a3' a a-3
-a a- ------ ---
,' aaa-a'A 3
3 3' ' t'- ia3/4g.3aa a3¶aa-;4j'aa ada-' ta a a. 4-jaka - a- ca--"
-' r 'C -' a-a a3a'Z7' a a<a apaaa., afaa Yaaaa a a
,4rSaba a a a-a a-3'a,.3 -4 a--
a 3
-faa' *a3 a a /cta .3 - 'ta.' 3' -- - - -
-- ' aa
---- -- r --- a- I. 3 a a a a3 a a aa- - 'a 'a-a,- a aa aa 3' a aaa ,Uaaaaa-p
'a- a -" - a-a. a '3 a33 Va a3
,-aa ta-a-a ZaaŽa aa3< 9'kat S-- ---- ---------- ------ -- ------ - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ---
- a aaaa aa a
- a, a-a' 3 " a- 3i a a-- a-- a-- a
- ------------- a S07 a-a a a a - - -a--a -a-- -
a -----a ------ a ; ...... 4
----- -a -- --- - -- a a a a a --a-- - --a ----
a a.3 a -
- 4. 97o'
------------------ - W
-tt--- - -- -
a-a------------- -939
-a -- ' -a -- -- -
- a'-- -- a-- ------------------
a aa a- -- a--
-- ajc
-- --- ýa
------- 3- a--- - - - - - -
-- a.;-- --
a-a-
~ -------
--' ---aa --
3a) -- a
$a
-- 4'--
.A
---------- -- - 1/2-a' yaaaa'a 3+/-,a' -- a--
a a- a-3'-- a a--
- a-- a-a-a--
G'9 3' a - a a.. - -- -
------------------ -a- - - - - - - -
-- a-43 -- a--- a---A 7 ---
a'-- t---a aa3 -- -- a--
- :7-7 - -- - - - -- - - - - -- - a----- - - --
--- - --- - a - -a - - a-.-
-- a---
-- a-a-- - -9's
'a --- t aa~~aa-ta I I. -"' -%8a.
- a a -- 3 a-a - --------- a a -
a
~t..
aya-aa a' p 4 a- a a a -a. ' --a I
~daa-'GIZZOa.a-aa'aa g~ a 3"(a3'a' 44p a'
.a3aa
~a a$4 a-3( W a-lat.X1/4~M~aa3'~aW~-aaa.~a-~d-fl aa-a&aaaaaWa-ra, cia.
33,'4,a.3- aa-t-a 4 3 faa'- ~aaa - .a-Ja 7*~'a-a' g a
- aaat" 3ta~pa-~aaj~a
-IIO
<-;Q)a
,alO~
-4 a~ a a
.a'9 3
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE ELA-Z. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 S~Reactor Head Penetration F;A-Ar ZMAN*P Ultrasonic Examination Data Sheet customer: WJ trC Plant: Ko*- P-)e*e,.- Unit: Penetration No.: Procedure: Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " q 2 z//o 16 Channel P/R N/A 1A ACCUSONEXI Data Acquisition Software: Version 6.2.5 ACCUSONEX mData Analysis Software: Version3 3.1B Cable Length: so' Type: 2e.- t--q # Intermediate Connectors: I Calibration Block: (,,o//q306o1 Calibration Setup: 4Scan File No.:. Initial Calibration File: /ZZc," .L.z6.q
.'3L q4zz.cV? 09. DO.q8 Final Calibration File: C,,-jU %A't,,M .
Scan Start: Z = r-O.- Scan Start:0= -5 Scan Stop: Z= 43 Scan Stop: 0 ='*3., Index Increment: 30 Channel Angle Serial No. Comments I 5-J. o50420c/14 Results: No Recordable Indications Leak Path Detected Axial Flaws Detecte Circumferential Flaws Detected Comments: Analyzed 15y: :_Level: Date: / H!z [Reviewed b : *_.. Level: 2 Date: a/D/- TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
7 P,A4,5'T A CRDM Nozzle Ultrannk Eyminafinn fl2t2 hacf Customer: Nuclear Management Cor poration Plant: Point Beach Unit: 1 Nozzle: I Procedure: 54-ISI-100-09 Nozzle Dimensions: (ph.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (del.): 0 End of Noz, (in.): 0.26 Probe Serial No.'s: Ch i S0420CN Ch 6 n/a CirX. Scan
,t Start:l__ de -0.7 " Stop:I 4.3 Ideg I -385' Setup:[.3 Ch4 n/a Ch9 n/a Files: A2267_08.00.48 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adiusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) . (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I OD 0.37 1.4 2080 1.9 209.0 0.46 208.0 209.0 0.03 0.46 4 0.25 0.54 AXIAL 1.9 2.7 2 OD 052 1.6 80.0 1.8 820 0.18 80.0 82.0 0.07 -0.19 21 0.10 - 0.54 AXIAL 1.8 2.6 3 OD 051 2.3 1040 1.6 1050 0.70 104.0 105.0 0.03 0.70 3 0.12 0.17 AXIAL 1.8 2.6 4 OD 0.43 1.4 144.0 1.8 144.0 0.39 144.0 144.0 0.00 0.39 0 0.19 0.49 AXIAL 1.8 2.7 5 OD 0.55 1.6 166.0 1.8 166.0 0.23 166.0 166.0 0.00 0.23 0 0.08 0.33 AXIAL 1.9 2_6 6 OD 0.53 1.3 188.0 1.8 1880 0.52 188.0 188.0 0.00 0.52 0 0.10 0.19 AXIAL 1.9 2.7 7 OD 0.55 1.7 2880 1 1.8 - 2880 0.10 288.0 288.0 0.00 0.10 0 0.08 0.76- AXIAL 1.8 2.8 8 OD 045 1.7 3350 2.7 335.0 0.98 335.0 335.0 0.00 0.98 0 C.18 0.18 AXIAL 1.9 2.8 9 OD 0.58 2.5 229.0 1.5 231.0 1.00 229.0 231.0 0.07 1.00 4 0.05 0.05 AXIAL 10 1.9 2.8_
11 ____ ____ ___ 12 13 14 15 16 17 Data Loc. 0 30 .60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 Inches MAX. 2.85 2.83 2.82 2.79 2.78 2.80 2.86 2 87 2.88 283 2.82 2 86 2.85 Inches
,MIN. 1.80 1.72 1.72 1.75 1.74 1.75 1.80 1.80 1.82 1.84 1.87 1.90 1.80 Inches Comments: Measured Thickness: 0.628 @theta of 233 deg with an axial position of 1.11 Limited Scan? (YIN): y 074=1103 Indication at root of weld. Depth from ID0 587" Z extent 2.26" to 3.03" theta extent 12 to 28 deg center location z=2.79" theta=22 deg 0 degree data position aligns with 0 or W axis Limitation - No leak path call. Required distance above weld 2.0" (paragraph 6 3) Distance above weld is 1 61".
No Limitation - Area of Interest above weld for crack detection is 1.0" (paragraph 6.2 of procedure). Analyzed by: Ij /I Date: L/2A- Analyzed by: /V/,9- Date: A$'9 9/24/024:24 PM Nozz 1 Page I of 2
Z Jo Z e6ed I. WJ40Q I. ZZON ZO/1lI6V'Jd £tZ:t7 LcIt't uol;lewewep IA!quMoO I I!qdn,,,,,, S,1 LL_____ L;"--- -- 44,4z '- 2 . . . /
.1. 1-I-
454.-,. -- ---- 4 4.
.44444 .,4' 1'*' ---- - -- -- - --
- 4 44 l i i I i
-- --. -- --- ---- ---- -s--
L " -ý
-- --7 --------
--- 1 --- 7 -- 4 07 oT I------------------ ------------------
I f-g. f ...................
- O' f ................... - 9'P7
------------------ C")
- . . . .. . . . . . . . . . . . . . . ------------------ - o0 0
"-----------"... ... -- - --- -- I--
-gu F-'" " -----.....-- ------------------
"- 0"9
-- - - l. . . . .. . . .. ... .
------------------ --- =1
- *4
.1-. . . . . . . . . ------- -- --- ---- 44
- '6 '1
.. .. 4--.. .. .. .. -- -- ' -- - - U9----- 9.9 7, --.
- -- -- - $45
,.4
't8A,9 VW-Z -4. dNV3nO+/-*4VthJ
o 4 A PRAMATOM E ANP CRDM Nozzle Ultrasonic Examination Dlata 5nhpaf Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: I Procedure: 54-ISI-100-09 Nozzle Dimensions: (1*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch I S0379CN Ch 8 Axi alS?. n/a IA,.;Stohl "t . * *.deg . ? - k Ch2n/ Axia$~.StbgL; 1,4 .Setupl;~ Ch n/a 4 .. ____.. Ch7na Circ. Scan Start:[1 -deg .ah 3 nla Chn
@1 -0.7 1 Stop:1 365 Ideg @1 31' Setup:1 3 Ch4 n/a Ch9 n/a Files: A2269 19.09 461A2267 08.00.04 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted CIrc. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (dog.) (in.) (dog.) (deg.) (in.) (in.) (dog.) (in.) Ratio Orientation Min Max 1 OD 0.56 1.7 00 2.1 00 0.40 0.0 0.0 0.00 IT 0.40 0 0.06 0.16 AXIAL 2 OD 0.55 1.8 21.0 2.9 21.0 1.10 21.0 1.6 3.1 21.0 0.00 1.10 0 0.08 0.07 AXIAL 1.6 3.1 3 OD 0.51 18 750 2.5 750 0.69 75.0 75.0 0.00 0.69 0 0.12 0.17 AXIAL 1.6 2.9 4 OD 0.59 1.8 88.0 26 88.0 0.81 88.0 88.0 0.00 0.81 0 0.04 0.04 AXIAL 1.6 3.0 5 OD 0.51 1.8 1330 2.7 1330 0.90 133.0 133.0 0.00 0.90 0 0.12 0.13 AXIAL 1.6 30 6 OD 0.48 1.8 150.0 28 1500 1.00 150.0 150.0 0.00 1.00 0 0.15 0.15 AXIAL 1.6 3.1 7 OD 044 1.8 234 0 1, 2.5 234.0 0.70 234.0 234.0 0.00 0.70 0 0.19 0.26 AXIAL 1.6 2.9 8 OD 0.46 1.8 255.0 2.5 2550 0.70 255.0 255.0 0.00 0.70 0 0.17 0.24 AXIAL 1.6 2.9 9 OD 0.52 1.8 2750 2.4 275.0 0.56 275.0 275.0 0.00 0.56 0 0.11 0.19 AXIAL 1.6 3.0 10 OD 0.32 1.6 2920 2.5 292.0 0.89 292.0 292.0 0.00 0.89 0 0.31 0.34 AXIAL 1.6 3.0 11 OD 047 1.7 316.0 2.3 3160 0.63 316.0 316.0 0.00 0.63 0 0.16 0.25 AXIAL 1.6 2.8 12 OD 0.47 1.8 3370 2.5 337.0 0.74 337.0 337.0 0.00 0.74 0 0.16 0.21 AXIAL 1.6 3.0 13 14 15 16------
17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz.Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 3.01 305 320 3.20 3.10 3.05 3.11 301 320 330 3.10 3.05 305 Inches MIN. 1.51 1.56 1.56 1.56 1.56 1.51 1.56 1.51 1.66 1.56 1.56 1.51 1.56 Inches Comments: Measured Thickness: 0.625 @ theta of 65 dog with an axial position of 0.931 Limited Scan? (YIN): y am.-'*=* ,,*m All flaws dimensionalý intersect with the wetted surface of the weld filet LImitation - No leak path call. Required distance above weld 2.0" (paragraph 6.3) Distance above weld is 161'. No Lim itatlon - Area of interest above weld for crack detection is 1.0" (paragraph 6.2 of procedure). Analyzed by: - Date: - Analyzed by: Date: 1v 9/29/0210.48 AM Nozz I FINAL Page 1 of 2 c~c~ed b
Plprti Z1 Zeieed 1.12840 1IVNIdI J.flOf EOI6ZI6V'V 817:%. L-PUW ZON- 9L --- 9L--t U
- UL-- LLý-OL-- -- G- 9-t-9-V- 'S- i z
99
' t I
,.~a
,.',O'
~ a a"
- a. a0/
mi
* - )2. Oa,aja.aI
-t a pa' laiaa 'at'" - a- a' ' aa aaa
- . ,' a,, a,a ,&,
- ------- a-.- -- a a pa I.' 'a aa. '-.
aa a.) 'a.aa'a
,.. a aaaa'a4Uaaa4aaa a-,.) aaaxara 'ta"; -
-7,4. -
a 4. ,a,aa ya
------------ ----- ------- .9. I 4 a Ca; I. I
----------------- , a.77 a' A - 'a- ,a---
lit:; at--a: 97;
-- '-a ----- -' -- -- -- -------------------
'a' K --- 'a, a-V-- a ----
a -- ----- ---- ---- -- a a aSP' --. a--- -
----- -- -- -- - 4-------
-- ---- -- -- -- - a . --(a-- --
--a. -- - -- - alat.--- --
---- aa-a.---y--- -------------------
-STC laaa-,a----.a- a
-- - - --- -OaT
-N- - - ~
a
------------------- -- aa a'--,----- a -a' G'9
- 'a.' --- . --- ---
------------------- --- aa---- --t ---. -a
-- a--- --- a
-- - a--- ---.
A- ---------------- a -- - - - -- - - - a'... a- -, - -- -OL a a
-- a----- --- a ;Aa ---- %N t
----- s--
a t~ Ia
--------- a --
t
------------- I----- It ---
- -- -- - - - - .. ataay-a Aa-.--- -a-2 aa, .axaal k-a-tc aaa--a---,taaf a 4 --
f---------- ----------------- a a, - - - - - - - - a-.-
--a- -- --
a - -~- - - - a- -a -- - £--
,a.,aaa.. aa.-- --------------
-6T 2'ý I I
'IdNV aY
POINT BEACH NUCLEAR PLANT LIQUID PENETRANT EXAMINATION RECORD Component ID: Component
Description:
Site / Proj'-ict: Page I of 3 RPV CRDMfNozzleNgumber I I Sheet Number or Work Order Number. 4S10003 PBNPlI R27 ISO Number: NDE Procedure Number / Revision: I Surface Condition N/A NDE-451 Rev. 20 TCN2002-0539 E AS-Welded []Ground E3 Machined Cl Other: xaminer(s) / Level / Date (Print):
.:A.JENSEN III 09-25-02 Temperature Device Manufacturer: FLUKE MT&E Number: MCDP-012 L. Location: _ W. Location:
Calibration Due Date 12-03-02 Surface Temp.: 72.4 0 F J'essel 0 Edge of Weld PENETRANT MATERIALS PRE-CLEANER PENETRANT RkMOVER Manufacturer/Brand: Ifet-L-Chek Manufacturer/Brand: Met-L-Chek DEVELOPER Manufacturer/Brand.AMet-L-Chek Type: E-59A Type: P'P-31A Manufacturer/Brand: ifet-L-Chek Type: E-59A Batch Number: 3930 Batch Number: 2654 Type: D-70 Batch Number: 3930 Drying Time: 2 mhh,. Dwell Time: 30 min. Batch Number: 4151 Drying Time: 2 mni. Dw~ell Time: 30 reIn. Indication No. L Location W Location Dwell Time: 30 mm. Upstream or Downstream - Round or Linear i Size Rernark* 1 Appx. 140 Deg. 1/4 in. N/I Linear 5/64 Indicatlon is light.Appx. 1 1/4 in. from bottom oftube Additional Remarks: See attachedphoto and sketch. .4 , & ,YOC4 -Oo-? / gt 0 , Limitations- If None, so State: NONE Examiner(s) / Level / Date (Signature): Revieyer I Level / Date: ( Oq-* 4 tt, ANII Review / Date: El N/A
/
/ 02 _Z _6_
i Form NDE 450.1 Revision 13 08/,15/01
QL 4w
.I View From Below 4' 5%
Indication #1 appx. this location 2700 (Stud 37)
1.. FRAMATOME-ANP RemoteUltrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-I, 54-PQ-i 00-2,.3, 4 and 5I A"Reactor Head Penetration tPRAM ,TaC ANP Ultrasonic Examination Data Sheet Customer: N,.Ma [Plant: B,*k, Unit: Penetration No.: 7- Procedure: 5- ISi- tO-"*'* Equipment: Description VH# Cal. Due Date SN# p.Tomoscan ' "1//o3 =.Z;q 16 Channel P/R N/A 1A ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3 3.25 Cable Length: Sol Type: !e'-i-4-q # Intermediate Connectors: 1 Calibration Block: o//q.o-/ Calibration Setup:
"Scan File No.: Initial Calibration File: Zt,-'. "2.09 A z7Z4-.7- 5".zZl-. Final Calibration File: cow 2 ., juep p -A Scan Start: Z - -.. Scan Start: 6 = -" Scan Stop: Z = (...- Scan Stop: 0 =3G"5 Index Increment: 3 ° Channel Angle Serial No. Comments
/ 5"o'1.. So 3Gl cN Results: JC-No Recordable ndication Leak Path Detected Axial Flaws Detected- Circumferential Flaws Detected Comments:
Anal ed bY: ,,_ evel: *Date: /,. 0. Reviewed by: i2~ QLevel: Z Date: /2~ TYPICAL DATA SHEET FIGURE 5 fýC(\4A 1l1 Page 31 of 32
A RAMATtA F N: CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 2 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iA.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg[.): 140 End of Noz. (in.): 0.58 Probe Serial No.'s: Ch I S0381CN Ch 6 nla a n , t , , , Idea :I Setup1, e-op.- ..- Ch2 n/a Ch7 n/a SCh3 n/a Ch8 n/a Circ. Scan Start:L.5 deg @1 -0.7 1" Stop:IL 365 Ideg @1 6.78 Setup: 3 Ch4 n/a Ch9 n/a Files: A2267 17.53.20 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 1 NRI
-2 -3 -4 -5 6
7 ; 8 9 10 11 12 13 14 15 16 5* __ _ _ _ _ _ __ _ _ _ _ _ _ __ _ _ _ _ _ __ _ __ _ _ _ D ate___ 17Data Loc. 140 170 200 230 260 290 320 350 20 50 80 110 140 Degrees ' WELD Noz. Loc. 0 30 160 90 120 1150 180 210 240 270 300 330 360 IDeglrees POLE Noz. End 0.58' 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 Inches PRFL MAX, 3.15 3 31 3 49 3 93 4.31 4.57 14.61 4.55 4.37 4.09 3.73 3.45 3.15 Inches IMIN. 1.87 1 87 1.95 2.45 2.99 3,35 13.47 3,41 3.09 2.75 2 27 1.93 1.87 Inches Comments: Measured Tickness: 0 619 @ theta of 161 _deg with an axial position of 5.19 Limited Scan? (YIN): I N Analyzed by: * *Date: ... , t,...
-,0Z.- Analyzed by: 7Dae U *
(6) 91241027:50 PM Nozz 2 page I of 2
". Nozzle 2Profli4,'.:
FRAMATOM, ANP, :- -. ' . - . -" "
*. . ... .. 1'. ..- *o'
14 5 ..---- -- , 4 ---
,--'.'..* * *. -.. - -- -----...- -. '-I. ------
4-0 2 ---------- -1 ---- 7-- -- --.-.... . . - ----- 13.50 .. ... . . . . . . . . . . . . . . . . . . . . . . . . . -- . . -. -- - --- - ---I........ . . . . . . 12.5 :- ......... . . . .. . . . . . .. 11 0.. ...........------------- -------------------. -------------------..-------------------.-------------------.--------------------. 10 .15 ..........------------- ..------------------ ..------------------..------------------..------------------. .------------------ 10.0 10.5 --------------------------------------- ------------------- -------------------------------------- 9.0 ------------------------------------- ------------------- --------------------------------------- ------------------- 8.5 -------------------------------------- ------------------- 7.0 - 6.0 -. -------------------. -------------------. -------------------. -------------------.-------------------.------------------- ------------------- 7.0 3.57 ---
--.................................. V ................................. ................................. -----------------
3 .0 . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . .. .. . . . . .. . . . -.- -.--.. 5.5 " - -
- pL3ugamwmnagMv,aPiv
-,------ ------ . ----------.I.----, *.* * -z- ------ .......... . I.. -. * .
M ~Tiiu
. 43M....
4.0 3.0 - ljj3Al~~ iiidl~ . Downhill, h.. -- 0.0 0.5
- -------- -- y ,,-----. .. . ,, , *, ,', ,* S 0.5 6l _111I .. "ý, , ý Jt,-Y -- iVt ý 2.0. '::-,'. .'..100 .:.:i* "* 15 1.. fl,, ,A,, ; -, 200. . . 250 4
*. 2.4 rNz.En -8
'- 9 .* 10 -15 - -12
,.... End
- 1 'p D -- 16
-1 -
Nozz 2 Chart I Page-2 of 2 7:50 PM9/24/02
1kc FRAMATOME-ANP NONDESTRUCTIVE FXCAMIN4AT1C3J P'Rnr* *I /3t-A-z* 7 Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-1SI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2 3, 4 and 5 A PRA-MA'r .MEAPI Reactor Head Penetration Ultrasonic Examination Data Sheet Customer: W M-C Plant: , IBe,,ýJ. Unit: Penetration No.: 3 Procedure: 5q- 15/- jOo-o"j Equipment: Description VH# Cal. Due Date SN#
. I jTomoscan "1o14q 16 Channel P/R N/A N 1,/1, ACCUSONEX v-Data Acquisition Software: Version 6.2.5 ACCUSONEX"A Data Analysis Software: Version, ".
Cable Length: - cc) Type: Ze&- i-q # Intermediate Connectors: I 4Calibration Block: "*o,,I,/3o.e; Calibration Setup: Scan File No.: A C, o'z .-..- Initial Calibration File: 4 qz0z(,. A-vZc..,,. or. c.Lis1< Final Calibration File: c,r -OIJurp, "FJL 7. Scan Start: Z = Scan Start: 0 -:5 Scan Stop: Z =6.-V8 Scan Stop: 0= *C.s Index Increment: 3' NODSRUTV EAIAMNPOCDR te Channel
/
Anqle 5"o.. Serial No.
- 5 q"*cM Comments
/
Results: I c!-e3c7ordable Indication-s Leak Path Detected Axial Flaws Detec-ea -: Circumferential Flaws Detected Comments: Analyzed by: evel: Date: /re " Reviewed by: Level: Date: / ,,. TYPICAL DATA SHEET (AA 1 O9-2 FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOM E ANIP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 3 Procedure: 54-ISI-100-09 Nozzle Dimensions: (inn ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 17 End of NozL (in.): 0.24 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a Axial Scar ' *Startl I *kLde{].',@ & lI'1'St6p' I ,Ideg :.-, .:" ,Setup: v ,: Ch2 n/a Ch7 nla {' ~ *ý j: Ch 3 n/a C / Circ. Scan Start: -5deg @1 -0 " Stop:I 365 Ideg @1 6.781' Setup: 3 Ch4 n/a Ch9 n/a Files: A226908.36.54 IA2269_08.48.15 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw 0 Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI \' 2' 3 4 5 6 7 . 8 9 10 11 12 13 14 15
'16 17Data Loc. 17 47 "" 77 107 137 167 197 227 257 287 317 347 17 Degrees WELD iNoz. Loc. 0 30 60 90 120 150 1180 210 240 270 300 330 360 Deqlrees PROFILE Noz. End 0.24 0.24 10.24 10.24 10.24 10.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Inches MAX. 3.35 3 66 14 00 14.37_ 4.39 14.27 3 97 3 62 3 29 3.10 3.00 3.19 3.36 Inches MIN. 1 98 2.37 2.92 3.27 13.31 13.17 2.83 2.27 1.92 11.71 11.73 1.73 1.98 lInches Comments: Measured Thickness: 10,618 @*theta of 1 2261 deg with an axia poitono 5.81 Limited Scan? (YIN):l n I Analyzed by: Date: ? /Zr,/4 , Analyzed by: 2 ,i Z'4 Date:
91261023:19 PM Nozz 3 Page 1 of 2
'-Ag.~~~oz a 3a 8,'I..4 a a 'aaa a
- a. FRAMAOMM ANP'., a . ' "... . aa%.,,.'.
103 1/2 . . _', .** _. ". __ '.: ' .. . . . .... .. . . .'.. ..". . .'. -- ..... .>. , . . - a-- ' - , * ., a .- - ' ,, -t .. k' * ,, , ,-.., , ,,'a .to, 14------ 14.0 a----- - - - - - - - - - --- -- - - - - - 125012 , ...------ --- -- - - - - - - - - - - - -' - - - - - - - - - - - - - - -- - - - - -- - - -' - --- - --- g22z2 'aF' 14.5 .-...... .
- -- ---.........-......... ..... : ,-'- A .
2 o ,
,4" ..... .$,.J,-af- :;.... ..*
12.5 12.0' - --- 4---------------------------- ----------------------- -~ a?.t'j 9 -. - 5*- - - ~ ~
- a - a a- a .- a - -- - - - - - - - - - - - - - - - - - - - a--
. a , a 'a a a ;
1 .5 ---------------------- .--- .--------------- .--- .--------------- .--- .------------------------------------------------------------------------ .--- .--
.055 .-.------- ------ ------ .-.----- ------------ .-.---- ------------- .-.------- - ---------- --- ---------- ---- ----------------------- ------ -- - --------- - - ---
110.5 0.0 - .------------------- .-------------------.-------------------. -------- ------------ ----------- ---- ------ -------------------- -------- ------------ --- 10.0 7.50-- ---------- -- ---------------------- :. ....................................... 6.0 5 - . ... -- - - - - - - - - - - - - - - - - - - - - --.- 65.5.0 ----------- ,. ---------------------------------------------------- 7.55 -.------------------ ----------------- ------------------ ------------------------------------ ---------------------------------------- 7.0,5 --.....- ------ *-........ 6 .5 ...
--- -- -- -- -- -- ----------------- III -- --- --- --- --- -- -- - - I[IIUI
- III.
-- - - - -- - - - ------------- .=--- -- - -- *.. ---- . . " --------------------
Downhili' 2.0 -Side,,,,
1.0 a-----
s ~ a1a ------ 4' 0 .5 '--------- a -- ----------- 0 .0- --- -- - -- - -- - -- - -- - -- - -- - - - - - - ----- - -ar 0 1z~ .' 3 - ' . -- a1 0% -'-- --------- ----- -------- -----a--. a- .. aa-- a..
.y.Zr ~~10 ~ - 150O 200.25 30 aaa&? a;?3O.
4aa ; .-'a ,a I "". . ', g' 4 a' ,A' a'QN q ' ta~a
-- 2 -3 -- 4
-6 -- 7 -- 8 10 -- 11 -- 12
. - .. 16 I~ ~'t
- 3 --
=-*14-14
-- 15
--u-unUphill / Downhill demarcation Etr-Noz. End 3:19 PM9/26/02 Nozz 3 Chart I Page 2 of 2,
L Cu£C I. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Hbad Penetrations PROCEDURE NO.: 54-fSI-lOo-0g I PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 I Reactor Head Penetration FRAUATOM* AMP Ultrasonic Examination Data Sheet Customer: N MC c Plant: - 3epe.L Unit: Penetration No.: lProcedure: 5- ISI- ,LO-') Equipment: Description VH# Cal. Due Date SN# gTomoscan " "I *'l,, "/2.0-o3zq 16 Channel P/R INA N AA ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3.5', V,, Cable Length: GOC Type: Ze.- 14-q # Intermediate Connectors: I Calibration Block: "o//q3o - Calibration Setup: Scan File No.: Initial Calibration File:A 2 6//A.."q Final Calibration File: cosinwurb r-Epommnk.4 7 Scan Start: Z - Scan Start: 0= - ° Scan Stop: Z = ,7 Scan Stop: 8= Index Increment: 30 Channel Angle Serial No. Comments Results: 00 Recordabll ndicatinn) I Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed 6y. Level: - Date: P- ;-02 Reviewed by: Level: 4L2Date: la . 7 TYPICAL DATA SHEET 6ew.2'ICJl. FIGURE 5 Page 31 of 32
S IFRAAATOME ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - Nozzle: 4 Procedure: 54-ISl-100-09 INozzle Dimensions: (irft) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.2 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a Axial SC~afmlt' i' ~'.S-t;I;Pýdg@I SIoe:~~I~g~L~;~ tupl Ch 2 n/a Ch 7 n/a F! ... '- ; , f... .:Vv- Ch3 nla Ch8 n/a Circ. Scan Start: j-5deg @ -0.7" Stop:i 365 Ideg @ 6,781' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_01.08.37 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adlusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to MIn Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I N RI _ ... ... . 3 4 5 6 7 9 10 11 12 13 14 17 Data Loc. 0 30 60 90 120 "150 180 210 1240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.20 0.20 0.20 0.20 0.20 "0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Inches MAX. 2 67 2 79 '3.29 3.71 4 05 4.27# 4.207 4.17 3 83 3 47 13 09 2.85 2.67 Inches MIN. 1 68 1.76 2.17 2.73 3.19 3.43'1 3.53 3 33 2.97 2.41 2 03 1.84 1.68 Inches Comments: Measured Thickness: 0 64 @* theta of 188 deg!with an axial position of 55 Limited Scan? (YIN): N Analyzed by: Date: -02_ Analyzed by: Date: 10 # - v 4 o0.-Zj.--l~ 9/241028:35 AM Noz 4 Page I of 2
.4"'
'4' I., 1'
' FRAMATOME AN , . - NozIe 4 Profile ' "S .\'k
'4' .;.
/5Z ( .
'.,' 4,:.:,:."* * :' ji.. . ';:,:: ."4:'"4" " . . -. - II 44 4* *'
- - -'2.2 *a '
14, 5u 14.0- -... .4 ,,..,'. , ---. 'v*:.;...;,'_. .< -,;.; ;;-*.'*. . .__ . . . . I 1 ..... .... ... . ................ 7------------ 7'7-- .................. 14.0 ... ... . - -'- ---- - -- --------------- ' - -- ----------- ----------------- ----------------- 12.5: -----------. ----------------- ----------------- 12.0' : "... ----------------- ----------------- 11.5 " - ' - - - ----------------- 11.0 -------------------------------------.., -................--............... ----------------- .................. 10.5 --------- -------- .. ..--- 10.0 ----------------- 9.0 5-----
----... . I . . .----------. . . . . I.. . . . . . . . I.--- . .. . . .. ---------------
I.,... ......... 8.5 4 -------- I-------- I-------- I-------- ------------------ 77 55 -.-.--------------- .- .----------- ---. -----------------. ---. ---------- --. -----. --------------------------- -----------------------...----- ...- 7.0 7.-- -- - - - - - - --- -- -- -- " -- - - - - - - - - - - - - - - - - - I- - -- - - - - - - - - - - - - - - - - - - - - - ---
.50
- 5. --- -- -- - --- - - --- - -- - -
5.5 1......................................................5 -"...................
.......... 14 2,5 * , == *m , ~mm = = m w = = = == = =* ' " .I.... . .. ,*- -- -,,= -- "'-- - "
Downhill 0.5 3. ;;-* . ..-* ',*:..... ...... .. * . ......... --................ ------ 4.*:-* ...
- 1.5 .
* ::.- :.'."-::.... "4.
; . -.I-.' ---------- :..... - ---. -------
4".. ....... . . . .'. ,4 "arr-
,*!-y' 1 a'
*" a.- 3 - 4-
-5 -- 6 -7 -8
-9 -10 -11 -12
,13 115 l -- 16
-Noz. End 1 ammmrnuaaUphill I Downhill demarcation 8:35 AM9/24/02 Noz 4 Chart 1 Pagb 2 of 2
0AC . FRAMATOME-ANP NONDESTRUCTIVE EXAMINATIrHN PRflC*Fnlfll=P Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration PRA4r,* a, AMP Ultrasonic Examination Data Sheet Customer: WM .C Plant: OI*a.. AJ.. Unit: Penetration No.: -4 Procedure: 5- /S/- oO-' Equipment: Description VH# Cal. Due Date SN#
.Tomoscan "-I1-4o3 1 .- c.
16 Channel P/R N/A NA1 /.A ACCUSONEX"4 Data Acquisition Software: Version 6.2.5 ACCUSONEX Data Analysis Software: Version .- 5 " Cable Length:- *0' Type: Ze,- 1u,-q # Intermediate Connectors: I
,Calibration Block: &0/19306/ . Calibration Setup:
Scan File No.: , I.'p7 Initial Calibration File: A- 2S 9._ 1
.,1' Final Calibration File: cr,,Jr M '.,"
, a() ; .34.9 Scan Start: Z = -. 7 Scan Start:'G = -° Scan Stop: Z = (,.7F; Scan Stop: 8 =.7es-° Index Increment: 31 Chann I Angle I Serial No. Comments
/ 5.0.. 5e ,a. c_ x
/
Results: o ecordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected "Itr Comments: Analzed b: ,.. ,Level: 7 Date: f-23-02.- Reviewed by: Level: -Date: /0- /. , TYPICAL DATA SHEET 40* 01.01,4, Ar/ FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOME ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 5 Procedure: 54-IS1-100-09 Nozzle Dimensions: (inr ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.34 Probe Serial No.'s: Ch i S0420CN Ch 6 nla Axial Scan .. 't e4 ) . , top: ,:. deg ,@ *: .- %LSetup: Ch 2 n/a Ch 7 n/a
~
Fjes- ~ ~~ S>-Ch3 n/a Ch 8 n/a Circ. Scan Start:I -51deg @L L-.,7"j Stop:I 365 Ideg @_ 6.78' Setup: Ch4 n/a Ch9 n/a Files: A2266_16.28.44 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI ,_ 3 4 5 6 7 10 11 12 13 14 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 1150 180 210 240 ... 270 300 330 360 Degrees PROFILE Noz. End 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 Inches WAX. 3.20 338 3.78 4.18 4.57 4.79' 4.85 4.72 4.43 40 354 327 3.20 lInches IMIN. 1.79 `1.95 2.28 2.65 30TO6 3.34 3.40 3.22 12.85 247 2.03 1.79 1.79 nhes ne Comments: Measured Tickness 0.5@ theta of 77 deg with an axial position of 1 4.51 _Limnited Scan? (YIN) N Analyze d by :
--__* /* ,* * . *D ate: _ . o __A nalyzed by :
- AD ate:
9/241028"35 AM Nozzle 5 Page 1 of 2
4 .4 .4 (4 44
- 4. 4 -4 4 444.
4.t.4 4
- IFRAMATOME ANP - ', - .4 4 4,.
44
-I - -
4,4 4
v' 4-4
.4 S 145.0 - " "'4-... .'.. <~.. .4' ' ...
4..". .. . ... 7. 4 4 4,4., 14.5 .. . . . . . -.. ............ 13.'-":- 47-- --- 13.0 -----------
,. S_.:..-.'.:..::'.!
1 2.0 . . . . . . .. . . . .. . . . . . . . . . .. ... . . . ----------- 12.5 -- - -- - - -- 12.0 11I5 - ~.~ - - - - -I , 4 -------------- . 4. . . 4.. . 4 - '. 11.0 - - ........... ...... S.................. .................. 10.5" ........ -L ------- ---------------- ---------------- ................. ----------------- i..... I - - --
- 4 10.0 --------- ---------------- ---------------- .................
9.5 9.0 ---- 8.5 ........ --------- ---------------- ----------------- 8.0 ........ .......... ................. ................. ------------------ 7.5 ........ --------- ----------------- ---------------- 7.0 ........ ---------- ------------- ----------------- 6.5 ........ 6.0 ........ ----------------- ----------------- ----------------- ----------------- ----------------- ----------------- 5.5 ------- ----------- ----------------- .................. .................. .................. .................. ----------------- 5.0 -- ----- ----- ------------------ 4.5 k A
--------- __ I ------------------ I .uuea.u A miuitnuumuunaauus A nnfueegffcnnasuu I, 4.0 unauvnuuui iuijwtflNAEfmguTje4 in.inw1 usuuuainun
- 2 ': 44,,
3.5 5 ,S 4 ?& 3.0 ---- - -- ---- - 44p4 (f*4\4)4S Downhill 2.5 ------- --4 --- -- 4, 4444
- ---:-:.- 7 -----
2.0'° --- 1.5' ----- ---- - 4- 4
- 47---
7.--- I., 1.0.5 0.25 *'7" .. . 4... . ----- ----- ---- 00,' _. 4
- p
'0 -4 . I I-
- 44 200'. 250, : 1- ; 300,:O.':>
* ,.4 _
- S,4.44 "~ " '4 ' -' ?' '" " . . . *,**,, t" - 4",* .4 tJ 4 74
--. 3
-7 ji-9 -11 iw. -- 13 - 15
'- Uphill / Downhill demarcation
.- Noz. End I 8:35 AM9/24/02 Nozzle 5 Chart I Page 2 of 2
??
ki -' FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Hfead Penetrations *P O PQ-100-1, ROCEDURE
* ' PQ NO.: NO.: 54-ISI-1 54-PQ-100-2, 00-095 3, 4 and A Reactor Head Penetration RA*4 - ItZ AMP Ultrasonic Examination Data Sheet Customer: Nimc Plant: Po,,*,A 4 BeA Unit: I Penetration No.: C. Procedure: 4.'£ I5/- /AO-0f Equipment:
Description VH# Cal. Due Date SN# pTomoscan 11 ,2- /-7o o37 16 Channel P/R t/A PI/4 I/,1 ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 350 & Cable Length: 501 Type: # Intermediate I-U.. Connectors: I Calibration Block: &o// 3vE/ Calibration Setup: Scan File No.: Initial Calibration File: A 7 =t,... ,o. - Z/ . 0 A 'ZZt,*...- /0' Final Calibration File: -, ./,6C3I7 Scan Start: Z-- O,,1 Scan Start: e = -5 Scan Stop: Z = II. Sl. Scan Stop: 0 =3o5' Index Increment: 30 Channel Angle Serial No. Comments 1 6' .30
*- 30,"t. -3 "5 o Z. "roF:D Z3 . &O3s 355oZo
&,*s 1" '_,'3 6 0 -z Results: o Recordable Indications-' Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected RComments.:
-Reviewed by: * ,.,_ j a .,. Level:- -'L_ Date: /6/;2 lo __ TYPICAL DATA SHEET FIGURE 5 q~ 1j 6523U Pace 31 of 32
IAN r- Z MKdA~rC1KAE = t WP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - _ Nozzle: 6 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.t ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 243 End of Noz. (in.): 3.72 Probe Serial No.s: Ch 1 35044 Ch 6 35052 tdeg,,, I - Ch2 35202 Ch7 n/a
*, " .. .- Ch3 35070 Ch8 nla Circ. Scan Start: I -51deg @I 0.47 I" Stop: 365 Ideg @[ 11.82w' Setup: I Chh4 35044 Ch9 n/a Files: A2265_10.15.41 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI "__'
3 4 6 7 8 9 10 11 12 13 14 15 16 17
' Data Loc. 243 273 303 333 3 "33 63 93 123 153 183 213 243 Degrees WELD Noz, Loc. 0 30 "60 90 120 150 180 210 1240 270 300, 330 360 lDeglrees PROFILE Noz. End 3.72 3.72 13.72 3.72 3.72 3.72 3.72 3.72 3.72 3.7'2 3.72 3.72 3.72 Inches MAAX. 6.72 6.76 17.00 7.31 7.42 7.76 7.78 7.69 7.47 ,7.20 7.00 6.76 6 68 Inches MIN. 5.11 5.18 15 43 5.77 6.13 6.40 6.56 6 36 6.18 15.77 5 41 15.22 5 09 Inches Comments: Measured Thckness:j 0 63 @ theta of 212, deg with an axial position of 8.131 Limited Scan? (YIN): N Analyzed by: -'/ ._Date*: /Z/o1.i - Anlye by:A"/p Date:
/ 00 1- ta-si.
Nozzle 6 Page 1 of 2 912210212.01 PM
ZO 10Z9e I 1JE8o 9 e1ZZON g0I72V/61d MU0:;. uoileoJew-p II0qu1o /llqd l I. ,,- -. 6"-' L OL-
-- 9 \ 00 :- .fM... 10
'4
* , -q
",," " ..... ...... ..---...... ..... ..... ....- ...... ..... .l .....
...- A -- - - -- ---- --. ......
- - -- .....----.. ... ... ....-- ---- -------- .. ..------- --.. 7-------- . .. --
S..
. . .. . . . . .. . . .-I-.. . . . . . . .. . . . . ..-I. . . . . . . . . . . . .. . . .- . . ..-.. . . . . . . .. . . . g C
* ..--..
- 3,,,. ,.. * . * . .-. . . .--...
. . ./ r-..
.. . . . . . ~~~~~~~~~~~~~~~~~~~-
.. . . * .- -.- t.--, . --
r .* .-- ..-. .--
- ') .,* .. * . ..o
. . ...-. o
,. * *-*.,4 . 4 O--T-o' CD to
.,.--------.. , .. . . --- . ..-- . -- . .-- . - O's
.- * *',:,X * ,-,;'**! i *,' ....-
,,- ---------?.,,'------ ----------- ......... 0*---...9..........-".....'
'4 * **o . , * ,;, . , *- ,- ,*- - -*--!--'
- - - -- --- 0.-- - - - - - ----.. , ' 0". - -,-- - - - -- G, *9 *'
4.-, ,taA
-... '... .... . . . .g s~~~wo,~ oLm ;-;--; -----------l---- ---------- . . -..----- . ..-
--------..- - ----.. --.. --.. g
"----;----------" :'* ;* ' '"*,;* "'i *".";.'. '"",:'7"- *' ' *'r*":; O*'L-",*"
0i
(. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1k .Reactor Head Penetration P*AU ATOM AMP Ultrasonic Examination Data Sheet Customer: N.MC Plant: o,,. , B o .A Unit: Penetration No.: " Procedure: 6-g- is/.-./00, 4 Equipment: Description VH# Cal. Due Date SN#
.Tomoscan , "/-7o ,o3I 16 Channel P/R ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.--5-".,. ";r Cable Length: 560 Type: Rc.-r1-4 # Intermediate Connectors: I Calibration Block: IniialCalbrCalibration Setup:
tcan File No.: ,q . Initial Calibration File: i 2.. 2/ Final Calibration File: SA e = M.37 Scan Start: Z= .I7 Scan Start: 6= -r' Scan Stop: Z= Io' Scan Stop: 8 = Index Increment: 30 Channel Angle Serial No. Comments
.3o"lj 3 zo 7.. 1D 3- 0.0,c 35040 d5" *,ofe 3 6 o fi Z Results: NoRecordable Indications- Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: Date: f- '-2-0-2 Reviewed by: / Level: Date: O. L v l I /' T""/"YPICAL DATA SHEET 7 FIGURE 5 Page 31 of 32
0 A F::R AIAATO M I ANI: - ... *.. LJL 'IIL customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Procedure: 54-ISI-100-09 Nozzle: 7 INozzle Dimensions: (im) ID: 2.750 OD: 4.000 Thickness: Downhill Side of Nozzle (deg-.): 0.625 258 End of Noz. (in.): 3.58 Probe Serial No.'s: Ch i 35044 Ch 6 35052
...... ,,Scan.,L.
... , St*tIrA,4*t d . Idg kAxial Ch 2 35202 Ch.7 n/a M .,, . , Ch3 35070 Ch8 Circ. Scan Start:L 0.47deg@ [j" Stop:I n/a 19 Ideg @1 365' Setup: I Ch4 35044 Ch9 Files: A2265-19.14.49 n/a Cal Block SIN: 60119300 Ch5 35052 Ch 10 Depth End Point I n/a End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Flaw Surface Weld Location to Min Min Max Max Total Min Max Total Length No. (ID/OD) Flaw Tip Angle TWD Aspect Flaw @ Flaw (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Mn Max 1
2 NRI
- 4 7
-9 10 12 13 14 16 17 Data Loc. 258 288 318 348 18 48 78 108 138 168 198 228 258 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 MAX. 651 6.55 6.79 3.58 Inches 6 98 7.64 7.59 7.59 7.54 7.40 7.17 6.84 6.60 6.51 MIN. 5'00 509 537 5.56 6.27 6.32 627 Inches 6.27 5.94 5.66 5.37 5.19 5.00 Inches Comments: Measured Thickness: 063 @ theta of 185 d*g with an axial position of 102 Limited Scan? (YIN): N Analyzed by: Date: 91 - - C,- Analyzed by: Date:
91231029 31 AM Nozzle 7 Pa~e I of 2
0-.
""14.5 -.. . . -. . ............ ..- .
i * , ;" ... .... . :...-----...---------....- 14 .0 ----------- . .. 13.5
...14.0------ . .... ........ . . ;....-.;.
13.5 ----------- - - - - - .. .... , " , " " ", . 13.....0 ....... --------------
~~
12.0 ~ ... . ...... .............................. 12.5 ---
. .- . . - 1' , , ""' , ""I p71" 11.5 .. . . .. . . . -- "- ':--- -:-------"
1 1.00 " -.- -.- 11.0--------.-.- . . . . .. . . . ..- . .. . ..-. ..-----------------.-... . 0 7----- 50.0 .................. ................. ................. .................. .................. 3.5 ......... 7.0 -.. :12- 1 - ................- 605 5.0 *'**:* ' " ---------- 4 .0 ------------ -- -" - 3 .5-
*. wo*/ -- o- - -- - 1 --- ------------------
3 ----- ---- - --- 14 ----------- 9:31 AM9/23/02 N ozz le 7 C h a rt 1 , ( fý-03 P ag e 2 o f 2
FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION P*mnntto* Remote Ultrasonic Examination Of Reactor Head Penetrations 9 . / I I PROCEDURE NO.: 54-fSI-100-0g PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5
. Reactor Head Penetration FRAMAMME AtNP Ultrasonic Examination Data Sheet Customer: NMC Plant: Po,,,'/ B2lA, -. Unit:
Penetration No.: g" Procedure: " -Is/-/*-/ -of Equipment: Description VH# Cal. Due Date SN# 4Tomoscan 12/7o. 7o3i , 16 Channel P/R 0 ,A t,/, ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3,T& '3.1 Cable Length: 5 o0 Type: RG.- PA # Intermediate Connectors:
*Caflbration Block: 3o//D301E/ Calibration Setup:
Scan File No.: Initial Calibration File: AZ'.cz /0'v.zf'.3 A zzG4,- iSo-. -0 Final Calibration File: R9244- cL-. 19.37 Scan Start: Z .0-,q71 Scan Start: 6 =. S Scan Stop: Z = 17.0 Scan Stop: 0 =t, Index Increment: 30 ChannM1 Angle Serial No. Comments 3 (&0'.s -3500 Lisvz- I soq¶'I Results: - ecordable Indi Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: . evel: Date: '*,Zo .1 Reviewed by: .Level: -1 Date: 9'/2. TYPICAL DATA SHEET 1., S0 FIGURE 5 Page 31 of 32
.A- n, CRDM Nn77'iA I lltrnnip li'njinfi,,i et..
Customer:" -.. . . ~ Nuclear - Management Corporation Plant: Point Beach
~. **~.*IQ ill lLgtl % a La IULP Unit:
I 1 L Nozzle:
--- .8 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.-): 260 End of Noz. (in.): 3.56 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scajt.'.I.. tIbf- .... -"J-W Setdptlj,.I.s,.,." Ch2 35202 Ch7 n/a Fi-,-"2.. .. ,, ........ . .... ....... ;-.
-... .,Ch3 35070 Ch8 35070. n/a Circ. Scan Start: -5deg @1 0.47 " Stop:1 365 Ideg @1 17.62j' Setup:L1 Ch4 35044 Ch9 n/a Files: A2265_15.07.00 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (de g.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 2
-3 4
5 7 8 " 9 10 11 12 13 14 16 Data Loc. 260 290 320 350 20 50 80 110 140 170 200 230 260 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 Inches MAX. 662 6.63 6.84 7.00 7.73 7.68 7.71 7.62 7.37 7.13 6.93 6.74 665 Inches MIN. 5.25 5.23 5.41 5 65 6.46 6.44 6.49 6.35 6.10 585 5.56 5.25 523 Inches Comments: Measured Thickness: 063 1@ theta of 168 deg with an axial position of 8 64 Limited Scan? (Y/N): n Analyzed by:-Date: z .. ,,0 Analyzed by: A Date: Cý/ L.-, 09 o. 9/22/025:12 PM Nozzle 8 Page I of 2
SJo Za6e8d . *IEqO 8 9lZZON ZO/I2/6VWd SE:S UOI1RWaewep 1IP4uMaoo /- 114llu,, Sl, PU3 -ZON! 9k----- OL 6- 4f! LL 9-B £ .==,-= %1,
$7
,°... """;'*
S° ;*,*:
* .g.,.*/r,',, "..."
" . "O .
ee fi
. '7.. SL: .. ...
, .a "' '"". " ..... . p ' '. ....
- °;AA",'
1/4 .... n',.t i:,
- <-Q*" ;*; P, r.=*/>
-I 0 - , ,I i5, f, - O-- - -- ------------ , .OI.- -
4'7
.. , -, . ", 1 . - O'
-a-----
!IIIuMoa 44. -- "------ "-" - -'9 S-- .a a
"---- -------r .. -- . ---
. in.
no:::::::::::::: :::::::::::::::::::::::::::::::::m:::::::::::::
-- L----
~~~~~~~~~~~---------- -----------
--------- I--I-----
- I-
'I . .-. --
I" n.I
,.N OT
--4--
g O'
~
S... .............. *.............. t ............. .............. 1 ........................... O'
- . t- - -". 'm S. .-.... .... ... 1
. * + .r": ..*, ..----
I --- - - - '- --- . - - V9'. - - - - - - --- ' F fr3.- -- - -
.5 4
-I , ,- -.. -------- '----- ...- g 6 /
Li, St
.S. .W* , I *. . .*I , ' /
45
. . -- -- - -- - - -- - - J -----.. " --*'" --, -----
V
-----""7 ,--------------------- - ". ---
- I--------
---- ". * -"o I'I, I" :-- '
*4'4 "C--- --- ----- : ------ -------------- ------------------ S:,' .,,
. , . . , ------------- .* ., ; - * . '-',.,,---- ,..9.* 7.: ,. , 7. :,----,,-.--,--,- ..-.... . ,.
j-- "" " ------- ---- ----- ------- --------- e
------- , - --- ----- elg- J----,.-------,,--**
l-ZO: ------- --- .. ,., * :'-.-" ----- --- --- I,
---------- I------- 7.. ---------- ------
..--- ,.-- ,,-.-'---- ------------- --------- 41
'--I
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCm:rnrInF Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-100-09
-PQNO.: P0-100-I, 54-PQ-100-2, 3,4 and 5 A Reactor Head Penetration AMTIOM, AMP Ultrasonic Examination Rata Sheet Customer: M.MC Plant: Po,,,,# Be,,., Unit:
Penetration No.:*, Procedure: *q-/15-,/a-*o Equipment: Description VH# Cal. Due Date SN# 4Tomoscan z-/7aZ =o31: " 16 Channel P/R N/,1 ACCUSONEX "Data Acquisition Software: Version 6.2.5 ACCUSONEXM Data Analysis Software: Version 3.9 0 Cable Len th: 60 Type: IZ6 -,-"-A # Intermediate Connectors: I
,Calibration Block: "///I E Calibration Setup:
Scan File No.: 22.s- c 3-. 8 / - Initial Calibration File: 4 :-'_/. 2:.-, Final Calibration File: ;22 4 - o. 'j -.7 Scan Start: Z =" .* Y?" Scan Start:' = -J" Scan Stop: Z = 1.7/Scan Stop: 0 Index Increment: 3° Channehl An e Serial No. Comments 6' "35,DW 3111.1-1 3 - zZ . -oF D 3 e,s0 350io 5" (p , o'5 3 *o,¢ 075- 3!F02-F Results: No Recordable Indications Leak Path Detected I. Axial Flaws Detected Circumferential Flaws Detected Comments: V..AT7 AnalRed by: 9 Level: Date: - q. -"2. Reviewed by: Level: Date: Iz,. q. 67..
>7 TYPICAL DATA SHEET FIGURE 5 @)911LAlD -2 Page 31 of 32
0 A CRDM Nozzle Ultrasonic Examination Data Sheet FRAAMATOME ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 9 Procedure: 54-ISI-100-09 INozzle Dimensions: (1s.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (de9".): 130 End of Noz. (in.): 0.91 Probe Serial No.'s: Ch l 35044 Ch 6 35052
,lc . ,Sta Stop:_ '"," d .. __t_,_- Ch2 35202 Ch7 - n/a Ch3 35070 Ch8 n/a Circ. Scan Start: J-5deg @1 0.47 I" Stop:I 365 Ideg @L 11.911" Stop: Ch4 35044 Ch9 n/a Files: A226505.08.12 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI- -..
2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 Data Loc. 130 160 .190 220 250 280 310 340 10 40 70 100 130 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.91 0.91 10.91 0.91 0.91. 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 Inches MAX. 3 62 3 93 4.17 4.58 4 62 4.86 4.78 4 56 4 09 4.09 3.82 3 66 3 62 Inches MIN. 2 84 2.99 3.19 3 57 3.76 3 80 3 68 3 47 3.11 2.84 2 84 2.72 2 84 Inches Cmet:Maue Thic'kness: 10.64 1 @theta of 150 deg with an axial position of 6.7 Limited Scan? (YIN): N Analyzed by: OZ6__-= tý2 *_ Date: V,/
, - 07... Analyzed by: AJ/,,? Date:
9/221028:43 AM Nozzle 9 Page i of 2
Z1 Z 968d '200r7'/l Q I. JL-43 6 91ZZON ZOIZEI6V'JV g9.8
------------------- .................... ------------------- ....... X........... ------------------ 0L
---- : -------------- .................... ------------------- ------------------- ------------------ ------------------ 9'L
------------------- .............. ------------------- .................... ------------------ ------------------- -9*9
------------------- ------------------- I------------------- ------------------ ------------------ ------------------- 0*60
---- t- --- 4s> -----
.-......b--------------
-T6 sot I-'. 1.' . 4
---------- 7-------- I I------------
T
%9*Ttt I ,
1, _ ,
--------------7-7
........... ------ .......... I---------
7---
-O *61
-- --- ---- - - - SIG61
.......... .. 7------------ ----- .. . . .. j
-Oon
- II I I Ai.9IZZON- B ;';,~.22 > :*w YIpj~%.~ vs~6vvs
CuZC .. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEfltRF L-A1. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-1 00-09 I PQ NO.: PQ-I00-1, 54-PQ-100-2, 3, 4 and 5 I 1kReactor Head Penetration FRA-, V5,MZ AMP Ultrasonic Examination Data Sheet Customer: NMC_ Plant: J~e--l F3 Unit: Penetration No.: )0 Procedure: 5q- is,- 0j Equipment: Description VH# Cal. Due Date SN# LTomoscan ""/./o3 -2.-oz. 16 Channel P/R NA NAI -I1A ACCUSONEX'm Data Acquisition Software: Version 6'.2.5 ACCUSONEX Data Analysis Software: Version 2 7-. 8' ,, Cable Length: Got Type: Ze.- t-4-q # Intermediate Connectors: I ICalibration Block: &o/)q.30o6 Calibration Setup: Scan File No.:. " jy'?., I Initial Calibration File: 1,)26e 2./S/ Final Calibration File:c,.rAJb PRnp,,c
- 7. 7.T.'I Scan Start: Z = r-.7 Scan Start: e= -ro° Scan Stop: Z = 7.r'2 Scan Stop: 0 = 2,cr" Index Increment: 30 Channdl Angle Serial No. . Comments I 5o°* $ oS£IC(.
Results: oRcordable Indications Leak Path Detected iaT Flaws Detected Circumferential Flaws Detected Comments: Analyzedby: ,...... Level: Date: ý7,,.-o0-2-. Reviewed by: Level: -Date: 'o ". 7-
'e2ýTYPICAL DATA SHEET FIGURE 5 tA OcA' Page 31 of 32
m, A CROM Nozzle Ultrasonic Fxamin~tinn 1l*f* R~hnn MAArn KA A .d Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: -10 Procedure: 54-1SI-100-09 Nozzle Dimensions: (ha) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 37 End of Noz. (In.): 067 Probe Serial No.'s: Ch I S0381CN Ch 6 n/a Axial--' I e$ ...... ;., ,sSetutop,:,- Ch2 _ n/a Ch7 n/a
* .. ......... , *.. . .. . . . , h3 n/a Ch8 n/a Circ. Scan Start:'l deg @L-0j" Stop:I 365 lde @1 7.57j Setup: Ch4 n/a Ch9 n/a Files: A226719.31.33 Cal Block SIN: 60119300 - Ch s n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max I NRI _,
2 _, 4 6 7 10 12 13 14 16 17 Data Loc. 37 67 97 127 157 187 217 247 277 307 337 7 37 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 Inches MAX. 3 69 3 88 4.25 4 64 5.19 5.62 5.77 5.77 5.41 4.91 4.44 3.89 3 69 Inches MIN. 1.94 2.17 2.49 3.01 3.46 3.97 4.33 4.25 3.78 328 2 64 2.21 1.94 Inches Comments: Measured Thickness: 063 ( theta of 185 deg with an axial position of 2.72 Limited Scan? (YIN): N I Analyzed by: Date: Analyzed by: tIP7A Date: I 9-2 J.dL 9/25/029 05 AM Noz 10 Page 1 of 2
I ZJo Z aBed SIJe840M ZON Z0/9Z/61A'V V0:6 uoqleoaewap IllqUMoQ] / IILdRw 9L-L- L-9 £ ,,-,-
'3'
.3 . 3'44
.3 3 N
- U4 4 .3 A
- 3O- 0W.. 3333
,s ','3'"3 3' 'U o'o o'3/4 3'.'
A
*'.j* -*.o ~t. - ' *,, I - - - -- -- ----- -- -----
3-='"3
.. 4 - --- '.--
- -~i?3.'4
-, --- -(3-
- ,3--
3 .
- ---- 3/4-. r-' 4- .-
3 g'O IlUMCoO - - - - - ----------- . 3 OT
-.. . . . .:. . . . . . . . :. . .t. . . . . . . * .. . .. . . ... : . '. .
ST,
~hp. '.ammm.-.... l...... O'P,
=:-,-Z--*-- _."n........
S 4....- wt....... wpn u un un pw nmuhg;m wunn n~
..... .. ......arer g's
-4,;" S'.", """ 0"9 g99 3.- ---- ------------- --- - -
E'L "tr...3 <,3 ,.-. -,3 9's
-- - ----- -' -----.-- --- - 0'6 T6
--.--------------- "----.. I......
-- .I-,-----
,-,- .......--....-.---.- ------ ---------- /- --------- -- ---- w------ -,--. -----..... ------.---
---------------------------- :* , -- ".- -'--" ----- . ... "-* "--,------ ,W .--------- . .. ,,-,,--..
--
- g'ot
"----"----"" /,--------------.------- ------
----- -w-,----,--- O'U
-. ----- ,*, I------------------
,,--,----,*. I -------- wN -----------
, - .- 'V----------------',, *
" ---------------- ',,*.w, *
-------------- .' ; -.. °-'------------------------* .
o'kk O'Ct'
. " . * .. .---- ,'= ".
--------- . *,*...o ,'I
- w.**
" -- ... -------- :,l Wet
'sCk' 0"W
;'*kt N -
Cg 9C.. FRAMATOME.ANP f~A1iY( NONDESTRUCTIVE EXAMINATION PROCEDURE " . - Remote Ultrasonic Examination Of Reactor Head, Penetrations PROCEDURE NO.: 54-fSI-100- 9 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration FRAMATaME ANtP Ultrasonic Examination Data Sheet Customer: WM r- Plant: o #-,
, ej.-. Unit:
Penetration No.: !Procedure: 5j- IS/-,1oO--'* Equipment: Description VH# Cal. Due Date SN#
.Tomoscan *11, q "1/-/03 22 q 16 Channel P/R N/A NA '-'1A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version .3.'51y. .
Cable Length: Sot Type: k,z.-qI # Intermediate Connectors: Calibration Block: *4o/1,q3oe/7 Calibration Setup: Scan File No.:/*2f.20- .S.e */4 q Initial Calibration File:,.25%c*.,/.2. Final Calibration File: ca..rijvco *r Fot'*J r Scan Start: Z = -.. ' Scan Start: . 5 Scan Stop: Z = 1.61,"Scan Stop: e = 3W" Index Increment: 30 ChannM Angle Serial No. Comments I 0 l 5os. cJJ
/
Results: (lb-_ecordable IndicationsE3' Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: J.d Level: .17 Date: /- .o -1Reviewed by - Level: .'Date:
)TYPICAL DATA SHEET FIGURE 5 tlsý-p ojýzc-Q'z Page 31 of 32
FpAMATOME ANP CRDM Nozzle Ultrannin Fvmin2finn fl2*a kf Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 11 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in4 ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.j: 0 End of Noz. (in.): 0.59 Probe Serial No.'s: Ch 1 S0379CN Ch 6 n/a
~~d ____ ý i; C n/a C7n/a WW T- 4Ch fly/a ChB Circ. Scan Start:L -5.deg @ -0.7 Stop:[ 365 Ideg @J fl/a
" 8 161' Setup: 3 Ch4 n/a Ch9 n/a Files: A2269_01.06 25/A2269_05.24.18 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI
-3 - -----
4 6 7 4 8 _ 9 10 12 13 14 15 16 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 Inches MAX. 4.94 5.37 5.89 6 54 7.14 7.55 7.61 563 5.15 4.57 4.10 3.75 4.94 Inches MIN. 2.13 2.50 3.39 4.36 5.20 5.79 5.89 4.19 3.73 2.89 2.11 1.67 2.13 Inches Comments: Measured Thickness: 067 1 theta of 2551 deg with an axial position of 635 Limited Scan? (YIN): N Analyzed by: Date: 9. -7e- ,. Analyzed by: #j /A4 Date: - 9/26/20026:38 AM Noz 11 Page I of 2
6:12 AM9/26/2002 Noz 11 Chart 1 Page-2 of 2 CNZ. FRAMATOME-ANP NOMNDFRTRI It'ThIFI IFYA£1UllW* d DD* b'nn r I=II NONDESTRUCTIVE ;:yAAAJKA'MnK' n0ee'cr%"n= Remote Ultrasonic Examination Of Reactor Hiad Penetrations PROCEDURE NO.: 54-ISi-100-09g N I N.: PQ100-154-PC-I100-2. 3.4 *nd_/ PQ P N "A "Reactor Head Penetration FRAMAOME AUltrasonic Examination Data Sheet Customer: W4 me-. Plant: P,#-- 1 ki Unit: 5em_. Penetration No.: Procedure: 51- 15i- .oo-* EI Equipment: Description VH# Cal. Due Date SN# gTomoscan "11-/13 2ozzq 16 Channel P/R N/A N/ ACCUSONEXj Data Acquisition Software: Version 6'2.5 ACCUSONEXm Data Analysis Software: Version.3--5 .. Cable Length: O' Type: k>&- 1-4-q # Intermediate Connectors:
.Calibration Block: ",ol/1473o el Calibration Setup:
Scan File No.: ., ; 22C, 7_.-t. 22"0, y Initial Calibration File:,2,(*./f.
- 4'.,
19- -.2.4 o -y. 7.j5 Final Calibration File:cofi-,6,.itA,0 r Scan Start: Z = -,' Scan Start: 0= " Scan Stop: Z = 7.57 Scan Stop: 0 = Index Increment: 30 Channe Angle Serial No. Comments Results: -- ordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: Date: - Reviewed by : Level: Date: /O,' e*ý TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 12 Procedure: 54-ISI-100-09 jNozzle Dimensions: (ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg:): 0 End of NozL (In.): 0.51 Probe Serial No.'s: Ch i S0420CN Ch 6 n/a Axal,.Scan*,* Stit -- _:_ de_ , Stop: , Ide§g 1@.
" Setup:Ir , Ch2 Ch7 n/a Qjle. 4 AT,~ ~ i Ch3 n/a Chl8 n/a Circ. Scan Start:I -5jdeg @1 -0.7 Stop:I 365 _deg @1 _7.5I' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267 01.50.241A2267 02.23.35 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 nl/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (dog.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI 3
4 5 6 7 ; 8 10 11 12 13 14 15 16 Data Loc. 0 '30 .... 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD N oz. Loc. 0 30 60 90 120 1150 180 210 240 270 300 -330 360 Degrees PROFILE N oz. End 0.51 0.51 10.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 Inches MAX. 3.08 3 25 3 57 4.12 4 60 5.03 5.15 5.13 4.81 4 29 3.72 3 30 3 08 Inches
]MIN. 1.191 1.31 1.65 2.33 3.32 3.76 4.16 3 89 3.46 2.1 1.71 1.31 1.19 Inches Comments: Measured Thcknes's=: 0 63 @ theta of 202 dea with an axial position of 6 22 Limited Scan'? (YIN): N Analyzed by: tr= jDate:, 9-;2.r -0 2 .-- .... Analyzed by: A( A Date:
7 ~~ ( O-0 Z,%(- uz-Noz 12 Page I of 2 9/24/028.35 AM
z Jo z 968d , ieqO ZL ZON ZOlIIZ/6VV g£:8 II*.,,?.
- I
.:........ .:_.. . 2... 90"*
- ---- --- ----------- ----------- S......:...........
- I
-A. '5 O'V "5A "S`
----------------- k-. I , --------- --
----------- ..... ------------------ * - .5 . 4' ---------
----------L ------
'Vol 9O's mnseomm
'kunneumak~~~~~~~k~~Wiin~~~i unaunf ~ ..... .ii~u ...... -~ -n --wnu -e
-e~
--ui-am
-u-e-te
-n-
-- ====- ====== ====.==-=-=-
------------- z ....
-- Ii 9.'
0"9 9.9
--------------- :__ ----------------- ----------------- k-- - - - - -- - - -- - - - - --.
I-.................
---------------- ---- tv ---------- 0*L
----------------- .................. ----------------- I................. I I-.................
097 I- -.. --.. ---------.
,I................
O's I-.................
,I........... .....
Ts 4 ................. 0'6
..................t__.
--------------- ----------------- ----------------- I----------------
------------------ ------------------ i.. ................
9.'Oi,
-'-a "----/" - --- " .--- . * :/-----
"'.I :'/ , : , -' - "-0------"
I"4,. 5j55.A. A"5 4A
-A 5' --
4 , . '4 , , ','i" -I, .." ,* A-s -
'~0It
, ' . . ,. . -A ' .,--- b I, ' .:-,.rlirw.....
ts 1 : . dN *p'O..r /*-'. fl ¶- ,- '
,r .,s ,',.
"T' R'- 77QR7k YT
Cl..C FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE " . Remote Ultrasonic Examination Of Reactor Hiad Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ -100-*i, 54-PQ-100-2,-3, 4 and 5
! t 1Reactor Head Penetration FR'AATO"MEAMP Ultrasonic Examination Data Sheet Customer: WMWC. Plant: c,-- !3e.c- Unit:
Penetration No.: 19 Procedure: 5q- IS- .o0"D'i Equipment: Description VH# Cal. Due Date SN# tTomoscan " ""/L/cI z-zZq 16 Channel P/R N/A N A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX" Data Analysis Software: Version q93 . Cable Length: go I Type: Ze.- t-- # Intermediate Connectors:
.Palibration Block: &,o/j93o06 Calibration Setup:
Scan File No.: At22.-.?3, Initial Calibration File: i9 24_irK29.9 5/ 4 Z627.67 oo. -3." Final Calibration File:CoA 0 r~yuco prxre"A*,'u Scan Start: Z - .7 "Scan Start: 6= -- " Scan Stop: Z = .777Scan Stop: 6e= j Index Increment: 30 Channel Angle Serial No. Comments Results: lecordable Indications Leak Path Detected Axial Flaws D--ecleo Circumferential Flaws Detected Comments: Analyzed by:) Level: V f Date: /0-2_7-0-* Reviewed by: , Level: .'-Date: /'/°-
/TYPICAL DATA SHEET 60 ,-,
FIGURE 5 (c Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 13 Procedure: 54-ISI-100-09 Nozzle Dimensions: (Ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 23 End of Noz. (in.): 0.2 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a A'tial , , .. S , Ie@.. I St I- ;"StP - Ch2 nla Ch7 n/a Circ. Scan Start:[ -5deg @ -0.7 " Stop:
~t ~ ~ ~-Ch 3 n/a Ch8 n/a 365 Ideg @1 7.781' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_00.03.01/A2267_00.39.15 Cal Block SIN: 60119300 ChS n/a ChIO n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI .....
2
- 3 4
6 7 , 8 10 12 13 14 16 Anlye _ _: -T _ _1 _ __- 17 Data Loc. 23 53 83 113 143 173 203 233 263 293 323 353 23 Degrees WELD Noz. Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.20 0.20 10.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Inches MAX. 3.11 3.37 13.73 4 29 4.87 5.13 5.19 5.09 4.77 4.27 3.77 3 33 3.11 Inches MIN. 1.46 1.71 1 227 12.85 3.55 3.95 14.21 4.03 13 47 2.63 1.86 1.54 1.46 lInches
;Comments: Measured Tickness:1 0 64 1 theta of 23.66 deil with an axial position of 14.311 Limited Scan? (Y/N):1 N I l zne A y v , , ,.k
- _ý'* . Da te : 1 - Z I9* - o ? - . ...Ana ly z e d b y : */ D a te :
/ ULsAV 0 .91. Z.o 1M 9/24/028:35 AM Noz 13 Parge I of 2
' F~RAM TMI ANF3, N -- 1- 13 P-'1.
*. 15.0 -' :-" ": - -- -- - - - -- . ... -
... 4%C .
- ---- *1*
13.5. --------- 1' 13.0 -- ----------- "1 12.5 --- - - -- - - - -- - ----------------- ----------------- ----------- "---------7 - -- - - -- -
, .4.
--------- .................. --- - -- - r- -- -
I .. . . .. . . . .. . . ----------------- ----------------- ------ - --- ---- -- -' - - - - - - - 11.0 -- - - -- - - - -- - - -- - ----------------- ----------------- ----------------- - -- -Ž . - V. .,P. 10.0 ---- -- - - -I--- --- - - 9.5 4------------- I------------- I----------------- I--------- --------- ii- --- - -- - 9.0 ----------------- ---------------- ----------------- 8.5 ----------------- ---------------- ----------------- ----------------- 8.0 ----------------- ---------------- ------------------ ----------------- 7.5 ----------------- ---------------- ------- . ......... 7.0 ----------------- ------------ ---------------- 6.5 ----------------- ---------------- ---7------------ ---------------- ----------------- 6.0 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- -----------------
- if--
5.5 ----------------- ----------------- ----------------- ---------------- ----------------- ----------------- ----------------- - -- 5.0 ----------------- ---------------- ------------------ ------------------ 4.5 -------- i--------- ----------------- ----------------- ----- - - - - -1 -- 4.0 to-M n-inaMaurt!4 -- ------------m~~~w i4" UmmIiua um 6 3.5 ----------- 3.0 ... - ...
--------------- ---------------- Dbo.nhfll
.2.5, -- -- - -- - --
---------------- -------I----- 7- . .4
.2.0. --------- --
1.5 -. ----------------- --------- I** (.1 V . 0.0'- '1 ')47 2I , , I I , , ,, ý;' 15 0 2 00 2 .5
-2 -3 -4
-6 -7 -8 10 - 11 -- 12
. - ---- 14 -15 --- 16 mn5wUphill I Downhill demarcation 8:35 AM9/24/02NolhatPge2f2 Noz 13 Chart 1 Page 2 of 2
* -. . *V, CiC I--
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head'Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Pt Reactor Head Penetration FRAMA*aMI A Ultrasonic Examination Data Sheet Customer: M )C, Plant: i,_.- B,- Unit: Penetration No.: 1N Procedure: 5q- Is/I- jO- 011" Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " ",/7/o. 16 Channel P/R N /A N 1A A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX M Data Analysis Software: Version 3-'ý2 s.5, Cable Length: IO' Type: 2&- -4q # Intermediate Connectors: I
.Calibration Block: &oio//q3oi Calibration Setup:
Scan File No.:. A Zzc,- o,,- ..- Initial Calibration File: A
-. *o.0Z2 I Final Calibration File: A16u: , 7.3 Scan Start: Z = q0"Scan Start: 0 = -* Scan Stop: Z = '7-41" Scan Stop: 0 =L,"
Index Increment: 30 iki ChanneI Angle I Serial No. I 501j. 15*oIZo C.M Comments
/
Results: (11-o Recordable Indications) Leak Path Detected Axial Faws etected Circumferential Flaws Detected Comments: Analyzed bY: Level: Date: qs't'f2
-Reviewed by: , . Level: -7*
Date: l- o.;z_ TYPICAL DATA SHEET FIGURE 5 Pace 31 of 32
PRAMAT(3tI" ANM CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - Nozzle: 14 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iia) ID: 2.750 OD: 4.000 Thickness: 0.625 Ch2 /3h l Downhill Side of Nozzle (deg.): 96 End of Noz. (in.): l- , "*" p Pd 0.26 l** '
*; "",,.-,,- *Y* S Probe 1". tu l Serial
"' .0,,*
No.'s: Ch I S0420CN Ch 6 n/a ItI M't~-- l ;g"*t
, S. ,*'n. .*N:'?,.-*, I F11 _____ d_____
"~ - ________ q,,,~i Ch2 n/a Ch7 n/a Fils ~ % ~,~4~f ~ ~~ : /£ 'Ih n/a ChB n/a Circ. Scan Start:I -51deg @1-0.7_ " Stop:I 365 Ideg @1 7.9f' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_09 59.52, _11.05.05,11.10.59, _11.42.02 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to MIn Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI _____
3 4 5 6 ; 7 8 9 10 11 12 13 14 is 16 6 36 66 96 Degrees 216 246 276 306 336 330 360 Deglrees 96 126 156 60 86 190 120 150 180 210 240 270 3-00 1WELD Data Noz. Loc. 0 30 0.26 0.26 0.26 TInches 0.26 0.26 0.26 0.26 10 .26 0 .26 0.26 0.26 3 22 Inches PROFILE Noz. End 0.26 0.26 5 42 5.00 4.38 3.78 3'43 3.82 A4.43 5.10 5 61 5 66 1.71 Inches MAX. 3.22 3.38 4.33 3.73 2.76 2.27 1.99 2.39 3 00 3.75 4.50 4.70 Limited Scan? (YIN): n MIN. 1.71 1.83 120 ,de gl with an axial position of 4.32 , Measured Thickness: 0 ,6 - t h* taof Comments: W/ ' Date: Date: 9 12 7 g
-/', Analyzed by:
Analyzed by: -L 7'j (. 9/24/022:37 PM Nozz 14 Page 1 of 2
Z1 Zo9e68d -" LýI1E4OI7LZZON ?QIV7ZI6V'I zc:z 00t
- S.D.
- 79
-----W UUMIUV WWN 11UU.11 1, UW nuuwwnMri.iMrmuusmm n 1d~n~mnunn ~ gfiuuuauu amnuanwnu
*----------------------- ----------------- I 0 *9
-- ------ I-------- -{ ----
----------------- ----------------- ----------------- ---------------- ---------------- 0*
9
--- -- ---s';
- - - (4
------------------ ------------ ----------------- ---------------- ---------------- *G96 ok O*
-- - -- 4-- --------------- ý,,
----------------- ----------------- ---------------- ---------------- 0',.--- - --
----- -- 4
-- - - --- - OW 4-- --. -
- z. r---- -
- -- ,- -- xx94t
------------------ ----------------- -----------------: ---------- ......
- 4;;'*-
--- - -Po~z.
-:nt
---------------- --t -----7-- 4--- ----7 ---
--7 II
- .9*C
---------- -- 1/4-
-,------------- ~~--' NV I
SWQIVINWtdW 0
'I,
*?~Y!¶V?ý'
2-i
.--. ,.jI; ZMVZ {: rN' .4
- 24
* - - I A
FRAMATOME-ANP NONDESTRUCTfViF IYAM!MA*Twtl nr1*tr=*r* Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09
, P0 NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 A Reactor Head Penetration zA*,A*t A*=P Ultrasonic Examination Data Sheet Customer: W MrC. , Plant: p.,-/-- Iec.* Unit:
Penetration No.: -Z-4 A5 Procedure: 5q- 15/- ioO"-6e Equipment: Description VH# Cal. Due Date SN#
.Tomoscan " 1,/'/o. 2..ozq 16 Channel P/R N/A NAI, ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version3-4 -s.5 Cable Length: SCO Type: Ze.- 1-4-q # Intermediate Connectors:
4alibration Block: (o/Jq3oe/ Calibration Setup: Scan File No.:. A zv._ -o.(t.I I Initial Calibration File:.r oZ.,o.'( A M*,.,'I-. e'*-
- Final Calibration File: c nm.wro ,=eurnf r 7.7-3-.4 Scan Start: Z = -o.1, Scan Start: 9 = -* ' Scan Stop: Z = .. ol1.O Scan Stop: 0 =3*"
Index Increment: 30 4 Channe
/
Anale 5"0 ° Serial No. 5oc..lG p.( Comments Results.
- r) Recnrriable Indicatlon* Leak Path Detected "Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: ' Date: Reviewed by: ,, - Level: -- j- Date: /'.,/' 2-.
/
TYPICAL DATA SHEET FIGURE 5 foloz, Page 31 of 32
"A CRDM Nozzle Ultrasonic Examination Data Sheet PRAIAATOMS ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: -15 Procedure: 54-ISI-100-09 INozzle Dimensions: (im) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg*): 289 End of Noz. (in.): 0.37 Probe Serial No.'s: Ch I S0416CN Ch 6 n/a topI 'Ž'~ de~i~,~ 'U Pi2 n/a Ch7 n/a r~ ~ ("* -. ~Ch3n/a Chi8n/
Circ. Scan Start:j -5deg @ -0.7 ,, Stop: 365 Ideg @1 7.0&801' Setup: 3 Ch4 n/a Ch9 n/a Files: A2268_10.15.41/10.51.38/11.30.50/11.43.10 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angie TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) '_ (in.) (deg.)
--- (In.) Ratio Orientation_ Min Max I NRI - -- _ _ -3 -4 -5 -6 _ -7 10 11 12 13 14 3nlye 16 by:___ 9__ A Date:
17 169 199 229 259 289 Degrees 349 19 49 79 109 139 Data Loc. 289 319 300 330 360 Degirees 150 180 1210 240 270 0 30 60 90 120 0.37 0.37 Inches WELD Noz. Loc. 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 10.37 0.37 0.37 Inches PROFILE Noz. End 5 80 5.65 5.33 4.82 4.28 3.64 3 21 3 21 3.17 3 64 4.22 4 82 5.33 1.50 Inches MAX. 4.28 4.20 3 83 3.04 2.21 1.76 1.67 11.93 2.08 3 04 3.60 N MIN. 11.50 248 degl with an axial position of 6 03 Limited Sc'ant (YIN): Comments: Measured Thickness: 10.631 1 theta of
... Analyzed by: /Dae
(*Date: /..
-'*....by Anayze 9/25/027:49 PM Nozz 15 Page I of 2
-C It; 22 >2 FRAMATO-ME ANP
'~ 4¶t%~j~ $
'.4 : ~'-
4
~
40 r I r 14. --------------- ------------------ 14.0,4 ------------ 4 13.5 "--- - - - -- ----------- ------- 44 4 ,ý," . 44Y4444 13.0",'-' a - -- - -- -- - --- -- -- - -------------------
---------- 7 -------
------------------- 44- -r ' -- ' ------- z 4 4 4 12.5 4 4--- -- -- - -- --
----------------- , , ., _., I 12.0~ ------- ---- 7-4 11 5 ,1 _ ---------- 7--
11.0' 4.444444444k-- ------------------ ------------------- - - - - - - - - - -4L
- - - - - - - - - - - - '-t---t-.
10.5 ------------------ ------------------- 10.0 ------------------ ---------- -- --------
- -- -- - -- - -- -- - -- -- - -- - 4-54---'--4----------
9.5 -------------- U,--------- ------------------ -------------------
------------\ý_
9.0 ------------------ ------------------- 4 4- 4 ------ 4----4 4 8.5 ------------------ ------------------- ------------------- 0, 0 8.0 ------------------- -------------------
'C U 7.5 ------------------ ------------------- -------------------
C 7.0 ------------------ ------------------- ------------------- 6.5 ------------------ ------------------- ------------------- I 6.0 ------------------ ------------------- -------------------- 5.5 5.0 ------------------- 777ýýý 4.5 M 4W4WR4Mnt4fl4444i4444 f 54flC4i4M4WPUWflfl44nUI I 0*flUU4WNiSSUShiU4 AdSM$UWduuuuunnmauu. Li iemuua4mun4erneuaevau, I. I.ntAuid.4dh44i44.4.ahddUd.444. A- uie.see.nee .... ARon I Iffi'momm gm&m 4.0 3.5-4 4--- -- -- - 7:7777___;<
----------------- --------------I----- 4 4 44 3.0 ----4 4--- -
4 --- 44-- 7 ----------- 7 '444444 Downhill 2.5 4 4 4 4 4 - - - - 2.0 - 44 4 4 44 4 4 - - ------------
-------------- 7----- Sldez 1.5 4 4 -- --
4--
- - - 4 4 4- - - - - 4-- - - -
.................... 4 4. 4444$
'.4(44.
10 4 - -- ----- '-- 44444444444444444444444444444444444444--'+--'- A
-- 4----- -------4--------.;A 46..
V 0.0 4 4 1 44 4.4. 00 4"~ ' 1'50 -k 00 5.
- egr -300
- e-<.
-2 -3 -4
-6 -7 -8
-10 -12
-13 --- 14 -15 -- 16
-§i Noz. End ~1 N""a"01Uphill / Downhill demarcation 7:49 PM9125102 Nozz15 ChartlI Page 2 of 2 1%
9C.. FRAMATOME-ANP NOND2STRUCTIVI* FXAMllATnt'lJ I=trtl I Remote Ultrasonic Examination Of Reactor Head Penetrations IR PROCEDURE PQ NO.: PQ-100-1, NO.: 54-ISI-100-09 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration rRA.MAT.CME AMP Ultrasonic Examination Data Sheet Customer: W M C. Plant: - Sek Unit: Penetration No.: /ICI Procedure: 59- lS/- 'oO-0'j Equipment: Description VH# Cal. Due Date SN# gTomoscan I I /-/03 16 Channel P/R N A NIA 1/,A ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Versionq3*< 53. Cable Length: - Calibration Block: Scan File so.: A.- A6 90' 0/19q30'/ 8, b.oo. Type: .2.- i-4-q # Intermediate Connectors: Calibration Setup: Initial Calibration File: Az24.8-.o'At. I I Final Calibration File: , pRz.pawm, Scan Start: Z-. Scan Start: = -5 Scan Stop: Z = 7%.? Scan Stop: = 3L.S* Index Increment: 30 Channe Angle Serial No. Comments
/
Results: (!ýo Recordable indication-s Leak Path Detected Axial Fla-ws 0e ec ed
- Circumferential Flaws Detected Comments:
o-[" Aoz/e e. ,,,, ,,W44L Su. 4 C. Analyzed b,: Level: 7Z7 Date: '! Z*0 Reviewed by: -. eve!: 7 -.-Date: 1612 oZ._ TYPICAL DATA SHEET FIGURE 5
/L\24 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: 16 Procedure: 54-1S1-100-09 Nozzle Dimensions: (io) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 330 End of NoL.( In.): 0.64 Probe Serial No.'s: Ch i S0416CN Ch 6 n/a
!~~;~~§I~I I~I~t~: ~ d~; C2n/a Ch7 -n/a Circ. Scan Start: J-5deg @1 -0.7 " Stop:l 365 Ideg @l 7.97(' Setup: 3 Ch4 n/a Oh9 n/a Files: A2268_08.00.05. A2268_ oS,.SI.53 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (In.) (deg.) (deg.) (In.) (In.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 23 ,,__
4 5 6 7 9 10 11 12 13 14 16 17 Data Loc. 330 360 30 60 90 120 150 180 210 240 270 300 330 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 Inches MAX. 2.96 2.92 3.43 400 4.77 5.24 5.48 5.42 5.17 4.61 396 332 296 Inches MIN. 1.35 1.29 1.64 2.09 3.18 3.79 4.17 4.12 3.72 300 200 1.42 1.35 Inches Comments: Measured ThIckness: 0.62 @ theta of 34 degtwith an axial position of 4.84 Limited Scan? (YIN): n Penphery nozzle. Distance to end of nozzle is 0.58" downhill side. Nozzle also has chamfer on ID surface. Analyzed by: *Date: I 2 !z. Analyzed by: Date: 9/2510211:52 AM Nozz 16 P;ige I of 2 j
i%4;4-jI * '5t1.t.s,
-, - ~ ',Vi,. 't ' . ' .,.
4.0 . ' "a. ,'A . ",, ,+ff<',::-' . I.w% ',=
.,..FRAMA'OMEANP 2("~,
A.'.'.) - :; ' Q , ,-' N.l1
,. Profile' ' . .
.,_,------- ,,,-,-, ; .--... ---- --- . . ...... 1-
..I --- - -- ."*,
1 244-
.5 °, ..- - .. - 4. -4 r. ' - -
- if',
.4
-........... r . '-,
12.0'1,, I - - - - - - - - - - 'V.
'120 -------- ---
1 1.5 -- - - -- - - - -- --'--- -- - --- - - - - - - - - - - - - - - -- - - - - - - - - - - - -- - - 111.0 ----------------------..------------------- ------------------- ------------------------------------------------....... ........... 1 0 .5 -- ...------------------- --------------------... - -- --- --. *... ------... ----- 10.0 [. ... .... 9.5 Z Z Z Z Z Z Z Z Z ZZ :Z ZZ =:ZI...... 8.5 - -------------------. 7..5 ...................--- ..------------------- .---------------- .--- .-----------------------------------------------....... 7.0 .. . . . . . . . . . . . . . A
... --- .. --------------- I-----------
6.5 ------------------- .................- ---------- ,--................---................ ---................ -.--.......... 6.0 ------------------- -------------------- 5.5 5.0 4.5
---- -------------- - I -I - -LD MIIUNUVU i[dl I ME i ut u fm n sn n L nfleigeeef lheulnnf ig leirn iAI mnInlni.lrlm ml" I i. iis.
4.0 ----- 3.5 ------------------- ----------------- --- -- -a.. 3.0 .. .. . .4 . --------------- ---------------------- Downhill 2.5 ------------------- ------------ -- --- .......... 2.0,. -------------- --------- ------------------- ---- 1.5: 7-7-1 7----
------------------- ------------------- ;?',
ý. I *f l'.
----------- 1 ----------------------- - -- '9" 0.5 .. ; : 7... I 1 11 .
- 4 " 4, 002
",200i ' " 250':' 4
-2 -3 -4 5 -6 -7 6-8
-9 10 "-11 12 13 ---... .14 ,15 --- 16 inNoz-End -- 1 -- ,=IUW"Uphill / Downhill demarcation 11:52 AM9I25/02 Nozz 16 Chart I Page 2 of 2
.ri Cu~
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE I Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration FR- UAOME' AMP Ultrasonic Examination Data Sheet Customer: W MvC- Plant: 8.-
&eAr- Unit:
Penetration No.: /7 ' Procedure: 5q- ISI- .1O0-c Equipment: Description VH# Cal. Due Date SN# gTomoscan " "1/1 3 .o1q 16 Channel P/R NA Nt/.A/A ACCUSONEX Data Acquisition Software: Version 622.5 ACCUSONEX ""'DataAnalysis Software: Version* .7. 97,* Cable Length: 9' S Type: 2- t4-q # Intermediate Connectors: I Calibration Block: "(,o/ 193o67/ Calibration Setup:
'can File No.: .4 ,?2 b7-,-, 2.9 Initial Calibration File: +,Pvgq'-/- 1 ,,O*
19 *, 6"*-- 2. a-5o" Final Calibration File:L.zJu', ft-otsqgc 74 ,r.41, Scan Start: Z = -. 7 "Scan Start: 8 = ' Scan Stop: Z = ,79Scan Stop: 0= Index Increment: 30 Channe Angle Serial No. Comments
/ 5"°- e Al
/
Results: Ecordable Indicationn Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: lAnalyzed b~y: 6,7 ,40- Level:
- Date: 7-2-O1Z.
IReviewed by: Level: .. t~Date: / 9O TYPICAL DATA SHEET FIGURE 5 Lk dct-2$tc; Pace 31 of 32
0 A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOMM ANF* Customer: Nuclear Management Corporation Plant: Point Beach jUnit: 1 _ Nozzle: -17 Procedure: 54-ISI-100-09 Nozzle Dimensions: (ire) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg*): 330 End of Noz. (in.): 0.48 Probe Serial No.'s: Ch 1 S0381CN Ch 6 n/a xial n *%Sf*'>.J. tb:J... Ideg\@ .,i ,-";Setdp';,L.. Ch2 n/a Ch7 n/a AU,~ k Ch 3 n/a C118 n/a Circ. Scan Start:[ -5deg @L " Stop:l 365 Ideg @1 7.781 Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_20.00.29/A2267_20.25.05 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial uAdlsted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Mn Mi Max Max Total Mi Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (dog.) (in.) (in.) (deg.) (in.) Ratio Orientation Min I Max 1 NRI _ II_ 2 ___
-3 -4 -5 6
7 8 10 i 11I 12, 13 16' 17 240 2 7 0 i 3 00 3 30 Degrees' 90 12 ISO,0S 2 10 ata Loc. 330 3 0 30 60 330 360 Deglrees
'D 210 240 270 300 90 120 1' 9 Inches Noz. Loc. 0 30 60 0.48 0.48 0,48 0.48 WELD 04 0.48 0.48 0.48 0.8 10.48 0.48 0.4 8 1 .8 3 98 3 76 Inches PROFILE Noz. End 2 6.18 5 .88 5.24 4 61 39 4.11 4.68 5.31 59 2.16 1.7 9 In c he s MAX. 3.76 6 4 .68 4 .2 8 3 .43 2 67 2 .7 1 3 52 1 .4 N
,M IN. I 1.7 9 1 .910 w
alith an axial pos of ition 32 6 Lim ited Scan? (YIN ): 1 A-theta of 18 11 de Gom ents: nm Measured Th c n ss: 10 64 4' ae Date 9* OLOZ'/ Analyzed by: SAnalyzed by: " -7* U) 4 (:30- - W-9/251029:05 AM Noz 17 Page I of 2
Z JO1 abed ý JJE4Q L ZON ZO19E16V'JV 90:6 A4.. ~ ý,
*,JfA.'~ 00
". t; ," Aý., A
-------W.-6 I-,- ,+/-ntt Inanaunn n q u WMý q
,n
----------------- ýZýý
----------------- ------------------ .................. I .................
------------------ A-C
--A--- A:
A-- - - A - - - A-
----------------- t-r--------- ..................
` ,¶I A I
, .... . t I~
A~t A~?A
~th
-- - - - -- - - - ----------- 9 4,V A 9AT A
Oil
~
6
'i J
.... A
.. .... A .. ----------------- "m A' - - - -- - - umvmm O
. .. A....'...
--- AA-t--'-6'----' ----------------- '--------- I----------
A..
.. . A
-- - -- A '
---------- -- 6--*-
------------------ - A--------- ---------------- 'A AA6 5? A-A., 'A A lAt AAAAA,,j';
6, '
- AAj AA1 ,AA'AA UIA Ct A': A A"A 5
Ci L.. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE t Remote Ultrasonic Examination Of Reactor Head Penetrations P PROCEDURE NO.: 54-iSI-1 00-09 PQ NO.: PQ-i00-I, 54-PQ-1 LO-21 3,14 an~d 5 A Reactor Head Penetration PRI*AMATOMC AXP Ultrasonic Examination Data Sheet Customer: M IC. Plant: - 13e,,-. Unit: Penetration No.: "Procedure: 5'-/i1- oOD.-O'> Equipment: Description VH# Cal. Due Date SN# Tomoscan' I/1 11"10 2o-C,zozq 16 Channel P/R NNA NI I I1/A ACCUSONEX "' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version -. 7.'S , Cable Length: gol Type: Z&- 1 # Intermediate Connectors: I Calibration Block: d~o//q3o / Calibration Setup:
"tcanFile No.:. 4;7'2.;'7 /J7. 0B"S Initial Calibration File: S7:226.'-,
$'.OV/
Final Calibration File: co.-WVC' PZ-raMA . Scan Start: Z = -. 7 " Scan Start: = -,s Scan Stop: Z = ?F" Scan Stop: 0= Index Increment: 30 4t Channel
/
Angle 5"oL. Serial No. 0* .) C.*A.) Comments Results: REEF~e-cordable Indicat: Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: T Date: - y ,2 Reviewed by: Level: -Date: lo.q-02 7'" TYPICAL DATA SHEET FIGURE 5 LA CRSV2 51 0 Page 3I of 32
A FR AMATOM E ANPI CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: 18 Procedure: 54-1I1-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 142 End of Noz. (in.): 0.66 Probe Serial No.'s: Ch I S0381CN Ch 6 nla AkiahSca'rn- Wit, S' n/a Ch7 n/a Circ. Scan Start:[ deg @ 07"
.Th ~ ~~ Stop:I 365 Ideg ~ @1 7.76' ~
Setup:[3 ~ ch~3 Ch4 n/a n/a Ch 8na Ch9 n/a Files: A2267_18.17.08/A2267_18.56.20 Cal Block SIN: 60119300 - ChS n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI . . ." . 2 2 4 7I; 8 9 10 11 12 13 14 16
-V
-7 17Data _ Loc._ 142 _
172 202 _0 - j - 232 7 262 292 322 _352 22 52 82 112 142 DegreesI PROFILE
- _w _ _,,_ _
WEL Noz. Loc. Noz. End 0 0.6 30 0.6 60
,6 90
-__-o_.
0.66 066,66 __ 120 0.66 150 0.66066 180 0.66 210 0.66 240 0.66 270 0.66 300 330 360 Degrees I c e MAX. 3 41 3 63 4 04 4.59 5.22 5.73 5.94 5.83 5.33 4.76 14 09 13 61 3 41 Inches MIN. 1 68 1.77 2 05 2.75 3 63 4.24 4.63 4 46 3 63 2.93 12.27 11.73 1.68 Inches Comments: Measured Thickness: 0.63 @ theta of 305 deg with an axial position of 6 99 Limited Scan? (YIN): N Analyzed by: .,l_ 1*f _._Date: 7/"Z5- 0--. Analyzed by: ,aRDate: 9/25/029.04 AM Noz 18 Parle I of 2
,, " C'\
'1 .,; '+" + " .. +.,'"t* ;I ...."_. ..j..-
ANP"..... .. ....
-..... 4L':
-4t2' ""+ + ,
1' "44" Nozzle " 18 "+3/4"','"
.... Profle... , ., .',
, ',*+ -'" *
" + %
* , . ' Any 1*1
,.. ....... ........ ... .. '... .,.......... ..... ,.+.,.,. " .. .. .. 0 11 . -' " " - ,-1 ,- -.--------- --- .... .
A A.... S m - , - ' ., , 4. 13 "0.. 4 ...............-................
,--------*------------------- I..... ... .
125" 1--- '-- 1 1.0 .. . . . .. . . . . . . .. . . . .. 1. . .. . . . .. .1. .. . . . .. . .,... . . . .. . .- . . .. . . . . .. . . . .. .I' . . . . .. .'. t.. ".. S1d0,0 405 ..... WIWIU -,......... nu................. fStN................. i4...........N .. - UII................. .......... IHISUW Ia
...... m........... I ..........
a" 21.0 -i---- --- -- --- - ---- - --- - e 10.0 -...---------- ----------- ------------------------- .
-- ---- ----- 3 4-- -----
7--
*,* 1 . +, . +*+*: ,. 2 0owhildearato Uphill- --, - --- - : --1)-- .+S -
, -- '< --* * -, --3-(0- -- . :*-----------------
7
* --oz--End-
' 7.0
.5 N---- --- ---
. +.. ----------- -------------------------------------------------
f-- 16.5 200...J...250.* ....................... 3.......... 4
................... Downh- i 19.5 .....--- ----- ----- -P-age-2-of----2 - -.......-.- ---- -------- .-.------- -- . ..
"+ -- 4.5*,---- - - -4.5--- -- -- ---- -- ---2----- *4 4 *,
-------- -o------ ------- ----7 --
------7
- ~~~~~~~---
- 4. ---------
5----- --------
+-- 3-.. . ------ --.-----
' " p ll ow hl e act o ... .
i J *- --------- .. .. Page..of.
-M/ ----- --------- --
- -- 5
9C , FRAMATOME-ANP NONDESTRUCTIVE EXAMiNATION PROCEDURE Remote Ultrasonic Examination Of-Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 SPQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Ak Reactor Head Penetration F;ZAUA-T,.= A Ultrasonic Examination Data Sheet Customer: ", hi .. Plant: Io,-%- er,~k Unit: Penetration No.: t9 Procedure: 5'/- IS/- Jo0-Orl Equipment: Description VH# Cal. Due Date SN# rTomoscan " 1 ozzq 16 Channel P/R N/A tA4,AN1 ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEXj* Data Analysis Software: Version 3W8* & .5 Cable Length: Sl Type: Z&- i-'-q # Intermediate Connectors: I Calibration Block: ,o/)q3oEi Calibration Setup: 4Scan File No.:. A zr_ 0T. Z.0 Initial Calibration File:4z2(.9.o.,,1q.-3 A .vw7,q - Ol. S1 . 3s Final Calibration File: e.jr,,wucD rp*,-vOzwA Scan Start: Z = . "." 7.Scan Start: 8=-- Scan Stop: Z = :7.78 Scan Stop: 8 = 7t,,S" Index Increment: 30 Channel Angle Serial No. Comments 0 5oi-. so -qC
/
Results: (.ro Recordable Indications Leak Path Detected Axial Flaws Detecte Circumferential Flaws Detected Comments: Analyzed b'y: Level: Date: (eLo0z Reviewed by: Level: _-Date: io/ Z TYPICAL DATA SHEET 82 ,.l'L* FIGURE 5 Paae 31 of 32
0 A" SRA MATOMME CRDM Nozzle Ultrasonic Examination Data Sheet Ar.jF= Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - Nozzle: - 19 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 314 End of Noz, (in.): 0.41 Probe Serial No.s: Ch I S0379CN Ch 6 n/a 'AYai sc -sl'rt:*-. d l' -, t.* , I " ,. ,..s h, "Ch2 n/a Ch7 n/a i , -- . , . " .. Ch3 n/a Ch8 n/a Circ. Scan Start:I -51deg @1 -07 1 Stop: 365 Idog @1 7.78 Setup: 3 Ch4 n/a Ch9 n/a Files: A2269 09.30.20IA2269 09 51.35 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI ** 2 ' 3 4 5 6 r7 8 9 10 12 13 14 15 16
`17 Data Loc. 314 344 14 44 74 104 134 164 194 224 254 284 314 Degrees WELD Noz. Lom, 0 30 60 90 120 150 180 210 240 270 300 330 360 Degirees PROFILE Noz. End 0.41 0.41 0.1 0.41 0.41 0.41 0.1 0.41 0.41 0.41 0.41 0.41 0.41 Inches MAX. 3.39 3 65 13 91 4 44 5.18 5.49 15.83 5 73 5.27 4.59 3 96 3 56 3.39 Inches MIN. 1.81 2 08 12.29 2.88 3 43 14.00 14.50 4.15 3.50 2.91 2.10 1.92 1 1.81 Inches Comments: Measured Thickness: 10 617 @*theta of 2401 denl with an axial position of 6.31 Lim ited Scan? (YIN): n Analyzed by: -" ._ Date: 6/.t,
- Analyzed by: -J7A- Date:
0ý 6 ocj4Lb-o1. Page 1 of 9/26/023"42 PMa No=z19 o 2
ZJO Z GLed I. P2e4o UL ZZON Z019Z1/6V1d IV; 4 l ,- #,,.i *4> 1 Ul'.
ll u - r - ';, . .~ I4lI I'.. . ... .. . 4.. , . .4 ... 4 ...4 . . .. - .. I 4 4 5 7--------I------ 4- -- --44 , ~4<
-'-.-~?.t~
-:-- -----'I,'..- ---- 4 ----- ----- 'k --- - - - ')'-4~ - -v t4
-4 . . . I - .. .. . . . - .. ............ .. . . O- . -- Q <
--- 4....4..... - - --. 0'0 IIlJUAMO ------------------------ .......... - "-----
. .. . . . . . . . . . . . . . . ."-T . -.--.-.-.- - .-.- . .-.-.-
-.-.-. -.-.-..-.-.- .-.-. . ..-.-. .-.-. . ..-.-. .-.-. . ..-.-. .-.-. -O- -.. .. ..-. . ..-...-.-.-.---.-.-
' ---- ----- ---- : ,, 7 t t 4 ----- ---- ------ ---------------------- ------------------- ------------ -- -
W4.' 4
& ~ ---- ~~-- ------- --------------------------
-V - - - -- - - - - m u o a *
"" ' *-'------------- - - - - --- - - - - - --- - - - - - - - - - - - - - - - m -- - - - - - - - - - - - - - - L A,
4VN. 14 -17
--- --- --- I........
-_------.-- -- --- --- --- . .... ----------- ,----"-..... "- * ------- . *, To. +t+" "
I..t - - -.-.. .-- . .... ... -- . . - . - -- . ,t A > A !'
, X" ' * $ ,; " , - " "* . . . - "'-. ... . "-.. . . . .. .
.. . . . .. . . -.4 , "
'"b'&
ttff 9jn 4' 4 4 44 ¢' 4 .4 Z. r'v 1 f_.4j4 ,'
- 4 4 ri, 4 4 7
~l%rs 4& !. Wia*, :'lil :,/-,
-W N~U.: MA-IUU-1, a44'L-tU-MZ,-, 4 and 5 "A1/4 Reactor Head Penetration r-RA "&T,.M AMP Ultrasonic Examination Data Sheet Customer: 1* IiPlant: 6 xj 8 e4.ekl Unit:
Penetration No.: p0 Procedure: 5/- I-Equipment: Description VH# Cal. Due Date SN# gTomoscan Z-/'s/c~3 2.O2.sq 16 Channel P/R. N/A N,1A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX MData Analysis Software: Version Y.T oV Cable Lenglth: S; C), Type: 26- i-,,- # Intermediate Connectors: I Calibration Block: '6.o/),3o*r, Calibration Setup:= I Scan 2 File No.:J7a.qrTz.I
- J7977.r*, ,f2
*49-It..-. sr.ol.j-..d.o., It. 79,.o Initial Calibration File:4:226?-W v.
Fn1Ci~r~tn 2P.2? Scan Start: Z =- Scan Start: = Scan Stop:- Z --= "Scan Stop: . Index Increment: 30 Channel Angle Serial No. Comments Results: ecordable l Indications Leak Path Detected Ax-a Dm c. Circumferential Flaws Detected Comments: Analyzed by: . Level. 2 Date: . I Reviewed by Level: I Date: /-'. o .. I
/TYPICAL DATA SHEET FIGURE 5 i
ý CkViD-L Page 31 of 32
I' A A KAAr.A A CRflM Nln77l I lhrcnni,. ,a..arnuujii
- . . vm IJaLO JIIL Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 20 Procedure: 54-lSI-100-09 Nozzle Dimensions: (1A.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg:): 295 End of Noz. (in.): 0.25 Probe Serial No/s: Ch ' S0379CN Ch 6 n/a SP d f *i,; Ch 2, n/a Ch7 n/a AM. 9 ~ Ch3 n/a ChB n/a Clrc. Scan Start: -51deg @ -0.7 " Stop: 365 Ideg@ 7.76 Setup: 3 Ch4 n/a Ch9 n/a Files: A226915 53 41117 06 3917 09 37117 43 31118 02.35/18 34 30 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (In.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI '_,
2__ 3 L 4 5 6 7 9 10 11 12 13 14 15 __ _ ____ 16 17 Data Loc. 295 325 355 25 55 85 115 145 175 205 235 265 295 Degrees WELD Noz, Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Inches MAX. 2.90 3.12 3.62 4.01 465 534 5.50 536 4 87 4.21 3.58 3.26 290 Inches MIN. 1.16 1.38 181 2.25 308 391 403 3.79 3.16 2.51 1.97 1.36 1.16 Inches Comments: Measured T"hickness: 065 1 theta of 282 deg with an axial position of 5671 Limited Scan? (YIN):_ N Analyzed by: Date: -2C-o "L.-- Analyzed by: JA Date: 9/26/200210"41 PM Blank Clrc Blade Data Sheet (2) Page 1 of 2.
SJo Z 86ed I. iB43 s1xq3698]d-eqoJdopejqsn OOZI/9gI/6vd WM:OL
,xp
___uoj*eoejwep Il1qutAoa 111dn L- PUA ZOfN,--- "/ S9L - ". -,.----- CL
-- LLL- OL- 6 98 L 9- 9-7 Z-'S a'5'-S--' ".~'~ .. >7 I-l OO !8 -. - ;. ,i
, . , ,,v',
-t2......... i _- L_ L _ " Os 0 ,
...........-....................--.-..-- 7.--..---..-.....
77.. .......
.. .... . ....... I... .-
... . .. . OPI .... .. ..... .................... ........ ..... .................... . . ...................... . ....... ... 0"7
.- ---- - -.. . ...............-+........... .... ................................ - -- - .-. .* ....... .... .......-....
. .................. ........ .... . ...... . ... . ................................. .......................................... .............. - . _-....,. .0
... ..... ........... ........... ..... ..... I..................
...... I.................
S-. -............. .... .. .. I.. ... . ... .. . ..... ....
- .4- -- - - .:-.................
.. ...... ............. . . ... . ...............- ,. . ..... 0.,,
* .',.4**;'*.
"'3' ..- -* - 4;* }*
- " - -*"* 4 T' - -'* - - -. - - . l" -... . ...... ... ...- ............-.....
l"'............... .-
""';..........l
.. ....... .. * .. 9-1*
S 6
. . . . . . . . .---..-------- .7-.------..-.-...-..---.. -
-11 A'- -.-.--.- ---. --.-------.. .... :.-.-----A.-----0 A... - ... . ojW, I
, T7 7774 .... . .......... . . . .......
-,,,, +
44*+;+'*J*.* ++.,,4 .;. .,t ..+.( +.:.+".,++_.,.+ 0 Iv f,, ..... ilJ,O~ OZ elzzoN ,, +-; - -,- .. , .t';, *'"t- ,:-*,. ..... t" - 44' I' 1 Lit 4 tL2 4 4 42& 4 OK. r,. c, -4. 'I 4 AM Ž~~C;3 Y ~ ~ ~C~' .. 44 - - '-yau.. :~" 4 t-"~-'V - .7 re,-$ ---. I ;,-y+. Oj ',I'J9 d 4 or,.I;rN *M,. ,-.t'" dN,,ab*Io+v.g.t-I r , .." K (--Ii'
- - a."-.
CuZC FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE L-AZ. Remote Ultrasonic Examination Of Reactor Head Penetrations P PROCEDURE NO.: 54-ISI-100-095a PQ NO.: PQ-1 00-1, 54-PQ-1I00-2, 3, 4 and 5 1kReactor Head Penetration tRAMA1WEMI AMP Ultrasonic Examination Data Sheet Customer: M IYc_ Plant: ,-L 8eArkj Unit: Penetration No.: ZI Procedure: 59- 1is- .0-ey1 Equipment: Description VH# Cal. Due Date SN# gTomoscan I/z,1.3 16 Channel P/R N/A N1 ACCUSONEX' Data Acquisition Software: Version 6'.2.5 ACCUSONEXm Data Analysis Software: Version . g: 7 . Cable Length: GO' Type: .'- ri-, # Intermediate Connectors: I
.Calibration Block: g.o//,3061 Calibration Setup:
Scan File No.: -,h 0.o5 ..-. ' o Initial Calibration File: . .,Z
,44q.- /.
Il- WO. Final Calibration File: p('e 1ogajw 15j, Scan Start: Z := Scan Start: e =Scan Stop: Z = -. C,! Scan Stop: e=03. Index Increment: 30 I .Channdi Angle Serial No. Comments I j. Results: tNo Recordable Indications "* Leak Path Detected SAxial Flaws Detect-ed Circumferential Flaws Detected Comments: Analyzedb: Level: Date: rReviewed by: 4 ,..... Level: J Date: / -/y .. TYPICAL DATA SHEET FIGURE 5
ý -01110V Pace 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - _ Nozzle: .21 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 312 End of Noz. (in.): 0.22 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a xiiStn\f ',u S et~ 0:~'in Ch2 n/a Ch7 n/a
- iet~f ~.E.. ~ ~ ',1-;,*, ,.~n/a Ch8n/a Circ. Scan Start: -5 deg @ -0.7 I" Stop:I 365 Ideg @c 7.78 Setup:I 3 Ch4 n/a Chg n/a Files: - A226914.50.12,_14.10 46,_14.00.03,- A;q.fl,:(,:p.%7,Cal Block SIN: 60119300 OChS n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI
-3 2 _ -4 -6 -9 10 11 12 13 14 17 Data Loc. 312 342 12 42 72 102 132 162 192 222 252 282 312 Degrees 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc.
PROFILE Noz. End 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 Inches MAX. 3.32 3 45 391 4.52 5 03 5.55 5.73 5.59 5 27 4.57 396 3.41 3.32 Inches MIN. 1.57 1.70 2.18 2.73 3.54 4.24 4.55 4.50 367 280 2.10 1.70 1.57 Inches Comments: Measured Thickness: 0.653 @theta of 302 deg with an axial position of 5.59 Limited Scan? (YIN): n Analyzed by: Date: t,/& ,- _, Analyzed by: Date: 9/26/025:54 PM Nozz 21 Page 1 of 2
Zo 10ZQ~ SljetIo ýZ ZON ZOI9ZI6N~d V9g:9 uo1ea1ewep IIqUMOa I II!Lldfl PU3ZN 6 9ý- 9- 9-U' L c
'4' 4444444 4\.444, - 'P 4.44444 4444 4 -.
.4'44 4444)4.4 444, 44,4 444444 4 44 4 4 44.444. s 4 44. I44~
44 44!
,,z 049 4 00V44 4.44, 4 4 4,4 444444444 444 4
-------------- I...... -- - - -- -
4444
- ý,4, .... ....
4444 I-444 4---- - 4--4
.44444. 4444444 444 444444)444444444.4444 *44 . . .. . . ....
------------------ -.. -7 ----------------
.4-- - - - - -
- -- --'4 *---44-444
- - - - - 4 - -4 07 97 liIqumoa 444'44 44444444
- - -444----
---- 4 OT 4444444444444
-- -444--- 4-40044 44444444
,,UU4NUIUA.U44U
.. maI~
,,~lU4N4TIIEA Mmmin~4UUIh 4-n~UuIII~U4U~EU 0IUUA1IEmul'm 9.9
------------------- -------------- 0,9
'9*
-------------- O*L GL
------------------ --------------- --.-- O's
-------------------- G's6
- 0'6
------------------- - 90I6
.0*14
- - - - - 44 44-- -
- Totr
---------- I--------
~
- - - - -4 I4- - - - - - -
-- - - P- - - . '- '
~~~~~~~
4~ - ~-,-44 . 4-4-.- - -~- .-.
-'-4
;4
- 4 7, 1 ---------
1 "4. I4 44 44 4 444 4**4 444 44*4 4 4 4* 4) .44 44.44 4..4
.,,*4444 4444-444
*s...L 4447-
444*44'P* 4.444 4 4444 4,
*44*4 444444.
4.4 .4*4. 444
*"r.:
V4 444. 44 444444 4' 44444 .4,
- '*Z*44 44..,. 4.;44 444
. 2 -
*4 44 4 - -
- 4 ., 2,*'*
- .4-,
01C1 - FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-SI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-Z 3,4 and 5 Ak Reactor Head Penetration FAWAtME A1NP Ultrasonic Examination Data Sheet Customer: Wm, Plant: &,y.k.Unit: aerkI Penetration No.: Z -- Procedure: 5q- /-/- DO-0" Equipment: Description VH# Cal. Due Date SN#
.Tomoscan "
16 Channel P/R N/A NIA "1/A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3-" ?..? Cable Length: Sol Type: -2..- t-q # Intermediate Connectors: 1 Calibration Block: &o//1q3oD/ I Calibration SetuD: I Initial Calibration File: , 7z&9-0o0 1q z.,
"IScan File No.:. AA Z?- -i-oc'. rj.s(
2zCoq0,,t-.19 Final Calihratfinn PIl. .Ole,& r_1, M F-C. Scan Start: Z - - o.1. Scan Start:O= . Scan Stop: Z =9 a I(. Scan Stop:8= ,' Index Increment: 30 Channel Anqle Serial No. Comments
"/ 50 503
$ 7-:l c4 Results:(,r No Recordable Indications, Leak Path Detected
- Axial-Flaws Detected1 Circumferential Flaws Detected Comments:
Analyzed by: Level: Date: */ 0/Z Reviewed b y: .Level: -Date: . TYPICAL DATA SHEET FIGURE 5 q0 q-*1.6 101&- Pace 31 of 32
9 A SAdMATrcM A ANIJ CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 22 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iPr ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.'): 331 End of Noz. (in.): 0.35 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a 'A Itdeg@.9*,,* _*al o,, .tJp:lT C h2 n/a Ch7 n/a Fes. "1"'.'7 Ch3 n/a ChB n/a Circ. Scan Start:[ -5deg @1 -0.7 1" Stop:j 365 Ideg @I 8.11 " Setup:E 3 Ch4 n/a Ch9 n/a Files: A226907.45.19 IA2269_05.51.51 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adlusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (dog.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI 2 __ 3 4 g 8 9 10 13 14 16 Data Loc. 331 1 31 61 91 1121 '51 1 18'1 211 241 271 301 331 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 Inches MAX. 3.34 3 30 13 84 4.46 5 01 5 51 15.72 15.60 5.21 4 69 4.14 33666 3.34 Inches MIN. 1.86 1.74 1.90 2.59 3.48 4 07 14.51 4.39 3 87 3.14 2.38 1.977 1.86 Inches Comments: Measured Thickness: 0.653 @ theta of 265 deg with an axial position oFf -:'6.73, Limited Scan? (YIN) n Analyzed by: ie .-_- Analyzed __Date: by: Date: 26
- 0* Nozz 22 Pare 1 of 2 9126/023:58 PM
S* ,.1-",t"s
.~ " "-r'"1'"..t :d ;- * "- > ",,-"' Nozzle; 22 Profile' :
RAMATOME AN7 , , Pi
'!14.5' '-...------'= - "- " = . . . - '... - .--- -- '---"-"-"---"-"-------- .0 135. .*, ~~~~~
.. ' '.---- .. ... ... .."-----'..4, '".. :' 3... "....... '
~---- . "., . . .. . . .. .. . . .. . .. . . .. ".. . '-y.- -"," -" .. .h-"- * ----
* -' *l,-.**
130---------- --- --- ------ 'C 12 0.5 - - - ------ . r- - - --
------------------------------------ -,5 1 -- - --- I 12.0 - -:...----------.-------...--- - - -S [""
455 8.0 .- u------uhaf--ggga---ugu----uuuf--ua
-.-.--------------- ----m uu
.-------------------- ......... sau m...-m .
-------- .---- .--- n-200
--- --- -.-uuurm
-~uuu -ruw 250
-u--
-~nt~~tuM fn -St
-mnu-u-su-u-mt-t- ,
"9 .5 .................. r . . - . . . . . . . . . . -- . . . . . . ...................................-- - - - - ....---- ---.
9.0 .... ..........................---- - ...... --------------.... - .-- 8.5 -.------------------- .------------------- ------------------- --------------------------------------------------------------------------...... --. 8.0 - .------------------- .------------------- ------------------- ---------------------------------------------------------------------------..... t-- 7.4 .5- -- - - - -- -- - -- - -- -- -- ---- - - -- - - - --- - - -- - -- -- - -- - -- -- -- - - - -- - - -- -- - - - - 639 ,5.4
.0-M5 - ...--~PM -~...
- 9/2602
- ---- . . -..-- - -- - -- -- --- - - - -- -- Nozz22Chartl
- ---- - - - -- -- - - -- -- - --- -- - - -- - - -- -- - - - - Page 2 of 2
. .. . . .. . .. . . .. . . . . . .. . . .. . . . . . .. . . .. . . .. . . .. . .. . . . . 4.. . ' . . . . .. ..... .. . .. ..
3 .5 --- i-I*:': I-=- -. 3----.--- 7727 , 3..:.'1 5-6 ----------- --- -------------------------
!~-13..... ----.. -----*
14..1 .. . ... .1 I~~------------ =' ='=1== = p il
--------------- o n il e ac to-----
1-0 ' ... *. 3:58 PM9/26/02.N....22.Chart...Page.2.of.2
I.'- CuW *
.FRAMATOME-ANp NONDESTRUCTIVE EXAMI'NATION PROCEDURE I Remote Ultrasonic Examination Of Reactor Head Penetrations I ~PROCEDURE NO.: 54-IS1-100-09 '
A Fr-A*rame Reactor Head Penetration Amp Ultrasonic Examination Data Sheet Customer: WJ MflC Plant: . . Unit: Penetration No.: TProcedure: 5L1- ,1/- .10-0"* Equipment: Description VH# Cal. Due Date SN# pTomoscan q"-, I ]:L/03 2.o2.gq 16 Channel P/R NA N/.A /, ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3,? &9 3.8 Cable Length: - G Type: I*e.- t-,-q # Intermediate Connectors: I Calibration Block: ,o/l.q3,o6 Calibration Setun: i IA=9C.- Th,3.o/" tcan File z.c,,q-/,P. No.- Az-C.9 -/o.z-&-tW1.1 Scan Start: Z -- o.:-V Scan Start: 0 = -5. G8 Initial Calibration File: Aq-zc,-q ,,o.iq. Z Fin= . lihr
~n Mi"~CC'(Ji ms, . . .. ., , .
INUA.J-w ri~FlAWdf
-JL, Scan Stop: Z = -*. c,/Scan Stop: 0 =
Index Increment: 3. Channeg Angle Serial No. Comments 1 50. 503 7-'Ict4 Results: No Recordable Indication Leak Path Detected Axial laDetured f Circumferential Flaws Detected Comments: AnalRved by: Level: Date: 19 b4 0 Re'viewed by: -Le-vel: -27Date: 1,0/q A l 11-1 TYPICAL DATA SHEET FIGURE 5 Page 31 of 32 a
A I=R AMAT'o IMI1 ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 _ Nozzle: 23 Procedure: 54-1S1-100-09 INozzle Dimensions: (in4 ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 290 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a Axiai.scanazr$sairt. ```*' ai~g.`@1. *1I'-;Stop',I : IdeJ*i--,". -Setub-I, :,= Ch2 n/a Ch7 n/a F~~~W~~s':-,". 1Z~~~ . Ch 3 na ChB / Circ. Scan Start: ]-5deg @1 -0.7 " Stop: 365 Ideg @. 7-961' Setup: 3 Ch4 n/a Ch9 n/a Files: A2269_10.35.11,10.49.58,_11.02.04.11.12 50.11.16 3: Cal Block SIN: 60119300 Ch 5 nla Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI - 2 _A 3 4 6
-7 8
9 110 12 13 14 15 16 17 4~~Z 4_ 9_ _ _ _ _ _ _ _ _
;Data Loc. 290 320 350 00-_ 20 50 80 110 140 170_
200__k-230 260 290 Degrees WELD NOZ. LOC. I 0 30 60 90 120 150 1180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.17 .. 0.17 0.17 0.17 1 0.17 1 0.17 0.17 0.17 0.17 0. 17 0.17 0.17 0.17 Inches MAX. 3.43 3.63 14.12 4.79 5 42 5.73 5.77 5 64 5,26 4.59 3.96 3.56 3 43 Inches MIN. 1.93 2.00 2.54 3 36 4.10 4.63 4.86 4.37 3 76 -3.12 2.42 2.09 1.93 lInches Comments: Measured Thickness: 0 617 @ theta of 3101 deg with an axial position of 5.39 ... L'imited Scan? (YIN):, n I Analyzed by: *_. v loZj.oZDate: qiz t.,,o?. Analyzed by: /i Date: 9/26/024:24 PM Nozz 23 Page 1 of 2
Z10 Z e~ed LiPliD CZ ZZON Z019Z16V'JJ yZ:y uoileDJewep Iflqumoo / llqn PUH *ZON. i ýT SL_ CL 6-1 9 i le 2z OZ
,- 2; 937'"
22 '*42
--- 2----
................ 2
- - - - - 24 222-7'.
7 ------- - 422 44 2 2 2i 2 i--- 2, 2j2 22'.22 4 422' L.4. 2,j 4 2 2.22 412.--- >-
-- - -22' --
2-- -- --- 2--- 2---- 2---- 2.-22*--22.2------ 42'2 22 2
*'2222 2222 2.2 2 WIT 2- 42 ----- - 2 -- ----2: 2 24222 2' 2 4 * - -
.t;221222222 22 2 22 2 2 --------------------
if2'Z .,222t.. 2 HIqUMOG .2 2
------------------ 07~
- 42. 2 22 22 222
'22222 2.22 242 097 2 - 222 2 2222222 b~~~~~~~~~~~~~h~~~~~
~i 1--------------------
ik ii i i6fih~1 h*~ rn a u--nnw - --n n
- n - -------------- u kiliS~.n*.j.n C............----
0*9 9.9 0L
------------------- --- --- 2-- -
- 2. 22 42 ..2 ¶4 222 "2 2 2 2 2
4222-- 2......*.......
--- 2 -- ---
2
..2..
-- - - . 2.. 4.
- --- .-5, -
2222.
- 2--
2 22 *2222h -'Z*4.
-- 2--t--------7-2 0*6
---- -- 2--- 2 2- ------------
.. .. . ---------- -4222... -- - - - 2--
- 2--
- - 2-- - 22 .---- -----2---r-22222 G"6-a 22 2 22 2 2 2- 222222222 2224,22 4 '22*22
----------- 22 ---2224 2 2 2 2 2. 2 2 --
------------------- 2 - 2-- ... 22 ... 2 .... : .. p24 2--
-- Ot 2222 '*1*424. --- 22 22' 2'; ---- 2- 2 2 .144.......-
2' 2 2 .5 2 2ff 2-
-- - - - - - - - 2-
.... f.... 2.222222.. 2 22222 2 '.. 2 "2- -------- '------
-- 2-----
---- ---)
------------ w------ 2--
- - - - 2-2 - - - - 2 22
- - 2---- 2-2-2-----2 - .4-, -----2 2.24227>.
-- - - - -- - - -- - ,222-------- 2-
- -- - -- - - - - - - - 2 2 4-4-4r -'t.-V-t..*
.24----------
2 *22 2222---- 22-- - 0-. .t 2 kk 2'2. 2 22 2, *22 2 22-- 2 2 2----
- ~~~t~~ "NV Vt 4 NaO.LVV4' 5~N~
2 IJOi EZ *2G2I\YZO 1 0
r4r" u.: ru-luu-i, 04-r"-1UU-Z, 3, 4 and 5 h A Reactor Head Penetration FRUA1J ZA MP Ultrasonic Examination Data Sheet 0 Customer: WMC, Plant: P,4-- PeA..k, Unit: Penetration No.: 2V Procedure: 5L/-JS/- IoO0'j Equipment: Description VH# Cal. Due Date SN# jTomoscan " * , /;/0zozq 16 Channel P/R N/A "N/A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEXm Data Analysis Software: Versiorn..-3&- y. r7. Cable Length: S
-' Type: Zs- i'i-q # Intermediate Connectors:
Calibration Block: (,o//9,3o3 / Calibration Setup: Scan File N o.: , = --. - ' .c . , Initial Calibration File: IS-
"/. 4'T.o~, .6. J ,/I./8., &.3T, Final Calibration File:O ,, rzw_u-,nM Cw
- 7.YZ.
31 Scan Start: Z - Scan Start: 0 = -- Scan Stop: Z = 2,Q7,"" Scan Stop: 0 =..ci in ex Increment: 3'
,Channel IAngle Serial No. Comments
/ 5 "o'J. .p , 9 c Results: No/ R cordable Indicationsý Leak Path Detected Axial Flaws Detec -- Circumferential Flaws Detected Comments:
Anal ed by: Level:*, Date: i I Reviewed by: Level: -Date: /.' ! I 4/ TYPICAL DATA SHEET FIGURE 5 I N) ýýVJý7-W Pa=ge 31 of 32
A 1=RA MATO3MI ANI' CRDM Nozzle Ultrasonic Examination Data Shoot Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 -Nozzle: 24 Procedure: 54-IS1-100-09 Nozzle Dimensions: (Ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg,); 320 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a 50b Ch 2na Ch 7 n/a Circ. Scan 2--AMTM __MStart:I AMP -5deg @1 -0.7 Stop: Nozzl 365Ultasni deg @I ExmntoDt 7.961- Setup: 3 he Ch4 n/a Ch9 n/a Files: A2269_15 29.12/15 42.09/15.49.07/_16.38 00 Cal Block SIN: 60119300 ChS n/a ChIO n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max
\_I__
1 NRI _ 2
-3 4 -5 6
8 9 10 11 12 13 14 15 16 3_ _ __ _ _ _ __ 17 Data Loc. 320 350 20 50 80 110 140 170 200 230 260 290 320 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees Noz. End 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.7 0.17 0.17 0.17 Inches PROFILE MAX. 2 80 130 O0 3 66 4.05 4.70 5.00 5 21 5.19 4.75 4.17 3.43 2.96 2 80 Inches MIN. 1.06 11.17 1.47 2.54 3.45 3.96 4.32 3 92 3.30 2.56 1.80 1.29 1 06 Inches Comments: Measured Thickness: 0 65 @*theta of 81 deg with ant axial position of .597 Limited Scan? (YIN): n Analyzed by: eZ.A,, . ,j,.-,,.,,-- "Date: 5? - ;29 -c 7-?. Analyzed by: 'N 1A, Date: 9126/20028:46 PM Nozz 24 Page I of 2
- I'
- '=,: '",' c .RAMATOMEAN. , "; . Nozze 24Profie, ,
15.01, ~ I'* .~P~3/4"t ~ tt 14.0d - . ~ Z 4 L . .. ** 0 "2 ....- -. .,. . -.... ......-... .....
"12.50.... ~~~ - "- ------ - .".....................................
-"... ,.:.".:Z-'-,.. ' , - - * .. . .. .. ; 7 '
10.05 91.5 ...... --. ..... - . . ...........................
. v 10.0. ..
81.5 . ........... :........ ............. .. ....................................... .................. .................
. ...-.--...---............... . I......... ............... ..............-
- ................. ... ] ......... .
9.5.......................-. . ...... ................. ........ ................. ..... ..................... 5.5 6.5 40.0 8.05 -..... 6.0 1.....................
..I........................... ............................
5.S -.. ... .... .... . .. .... ....... . . . ................ ................ ................ ......... .......... ...... ...... ....... .. l........... 5.0....-............--- -.-.-. ... ... ... ... ---..... 5.0 ................. ........................................ ..... ........... .............. ,.. . . ............. ........ ... ..... .... .... 4 .5 . . ......... 4.0 3o5 - o.... - . ..-.-----
-.------- ..-ý- . . ...-- _ .. ...... _.,.. *'* . .. _ ......'_.,......... ......._............... ............. ....... ....... ...............
3.0* .. .. *...... .......... . -. .. .. ... ...... ... . ............. _. ... ..... .......................... ,
"2.50 -"- - - I,- I -.. 7....
. . . . ..,* *... ... .. ,.. I0...... ,,...*...... ....... . * - 200..
2.07 1.0*" * "..
------ . . ..... .-.. .'i* .... '- :*
S-1 -- 2 -3
*,. 5Noz-9 E --- 10 --- 711 S ...- 13 -- ý14 - 15
- '1* -. Noz. End --===- 1 -'=--Unhill I Downhill depmnre;-
8:51 PM9/26/2002 Nozz 24 Chart 1 Page 2 of 2
r-w riu.: rw-luu-1, 04-tPU-1 UU-z, 3, 4 and 5 A Reactor Head Penetration nM A--.A'7%5,V C ustom er: M M'PC P e n e tra tio n N o .: V'.- AM-Ultrasonic Plant: Examination Data Sheet o.,* P ro c e d u re : 5 q - i S / - 3ej- Uhit:
,jj Equipment:
Description VH# Cal. Due Date SN# Tom oscan " "q 9 "11-/0 2-,zzq 16 Channel P/R N /A N A 'IA ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version-35S" 7,'3 16 Cable Length: Type: 1-4 *-q# Intermediate Connectors: I C a li b r a t io n B lo c k : / j"&,o q3 o 6 r C a lib ra t io n S e t u p : S c a n F ile N o .: /7 2* /;.z..S-.
; 4* . ? . / , In it ia l C a li b ra t io n F ile : ;2 ;,26 a'7 0 -1./ 11. -7 ij.Y.?/.o7 4*..'4 '..2D Final Calibration File: z jm uuXi,, 'fe", *,q Scan Start: Z = *. Scan Start: 0= Scan
- Stop: Z = Scan . Stop:
, 0 = JO-r Index Increment: 30 Channel Angle Serial No. Comments Results: jc cordable Indications) Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
/
A nalI e b :wd Level: D ate: -7 -* . tI Reviewed by: Level: . 1 7--Date: /Oc/6 I I STYPICAL DATA SHEET FIGURE 5 fi7N. Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Shpft FRAMATCOMM ANF* Customer: Nuclear Management Corporation Plant: Point Beach " Unit: 1 Nozzle: 25 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 302 End of Noz. (in.): 0.3 Probe Serial No.s: Ch 1 S0379CN Ch 6 n/a
~Sb"~~ ~ ~ ! t~:I ~ld~§I~
~ Sdt~f
~A 1 Ch 2 nIaa
'~- .. Ch 7 -n/a V*M in' Sn/a ____________C3 a
Circ. Scan Start:5 313deg 3-0.34."0Stop: 365 deg @1 7.96' Setup: 3 Ch4 nla Ch9 n/a Files: A2269_12 53 23/13.09.18/13 31 07/1334.20 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI - 2 -3 4
-5 6
7 8
-9 10 11 12 13 14 15 16 17 Data Loc. 302 332 2 32 62 92 122 152 182 212 242 272 302 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 Inches MAX. 309 3.23 361 4.25 4.84 533 557 546 5.13 4.48 3.94 3 34 309 Inches MIN. 1.38 1.52 1.71 2.47 3.30 392 4.23 4.10 350 2283 2.09 1.58 1.38 inches Comments: Measured Thickness: 0 65 @theta of 278 deg with an axial position of 5.13 Limited Scan? (Y/N):1 N Analyzed by: Date: 9-, - Analyzed by: N )P. Date:
I, 9127/200212 32 AM Noz 25 Pige I of 2
"'4. *44 4,.
-; ~~4 '2' ~Nozzle 25 Profile'- ,r"'/
.2' FRAMATOMEANP * '4 .. 4 K - - '4
! "5. "* ' ° t;. ' -' *. ... .... .... .. . . . . . . . . .. . . .. . . . . . . . . . . . . 4..
. .. gJ.- '13,; 0 135 ............................... ........ ................
14.0 . z '..... 13.5 .......
. _22v 13.5 . .... . .. . .........- -... -. .r-
- - -. .. . ..... V4 U phi llk 4' 13.0 .-.-.- ----
i .............. 12.0 .......... .............................. 11.5 ......--....... ..... 11.0 ............... .................. l..... .................. I".......................... 10.5 ..-... ....... .......... t................................ S... ............................ S.... .. . .............. ... 10.0
.......... .............I...........
S............ ii
.... .l......................
7.0. .....-........-. ............-........................... .-.......-................................. 8.50 ..................... ...... -----------------...... ..... ................ ................ I-................... . I-.......------------------------
........ 22 ..-.- ..........
7.5 .... .-. .. .... --- ....................... . . . . ....... ............................ S.................................i S....................... .... ..... S..... . ................ . . 6.0 7.0 -....................
. ..... I-...............................I.......... . . .............. ................................
- ------- I .............................
S............................... .................................. 4.0 ........................-.................... .......... ............... ........ ................................ 4 . ...............................-.. .......... ...... 3.5 4.0 -.---------- -----............. . ... . . . .. . . . . . .. 3.0 ......... .... .----.------.-. -.---.--.- ---- ..-....... ......... .-. . -- ..- . ..................
...... . . .- - Downhill 2.0 ...... Side 1.5 -. i......- ... -"i~ ----- -- ---- i' .. ........ .. .. ... ........ . ........ ......................
0.5 ............... . .. .................- .... . ... 0.0 4:;.V'
-1. ,,0 . .... '1.0
"" 50,....
100
- 1>
150 200 25O - 4300:; 1,: 4,1 ,,,. - . ,' *
-2
-5 -6 -4
-7
- 9 -- 10 -- 11 -- 12
-13 -... ...- 14 -- 15 -16
-Noi- End "---1 "*- Uphill / Downhill demarcation 11:31 PM9/26/2002 Noz 25 Chart I Page 2 of 2
I I rv N.: -1UU-. 04--.-1 U.. - .4 and 5 1 I FT AA Reactor Head Penetration
'Ultrasonic Examination Data Sheet Customer: ' NJ M _-.J Plant: M-- 3,e-,k Unit:
Penetration No.: /Procedure: Equipment: Description VH# Cal. Due Date SN# VTomoscan " ,1/-4103 '-1,9 = ~. 16 Channel nP/R e ACCUSONEXI "vData Acquisition NS/A Software: Version 6.2.5'No CmmA ACCUSONEX'm Data Analysis Software: Version S- ,3. 9 7# Cable Length: - IS ; 0 Type: Ze.- t'4q # Intermediate Connectors:I Calibration Block: "&ol e 73o el Calibration Setup: S ca n F!Ile No.: A,)2"-2,1.. o/. ý2.73" Initial Calibration File: ,f2-* 71- o.- *,06 c-Axa FlZaws Dett.e Final Calibration File: Detecteum pderaffljf* Scan Start: Z -" Z2 Scan Start: e - Scan Stop: Z =rS ,'JScan Stop: 0 =.7*5 Index Increment: 30
-Channel Angle ISerial No. Comments i *o' SO5c.-17
- 0 F
'I SResults: CfNo Recoi_.dble Indicatiý_nt-, Leak Path Detected Axial Flaws Dete*-U--- Circumferential Flaws Detected Comments: 1--e Analyzed by: Level: _L Date: I -? I-oz Reviewed by: Level: -Date: A9 -'. ,. 65 TYPICAL DATA SHEET oc.3 *O-t5°°Z/ FIGURE 5 Page 31 of 32
FRAMATOMG AN'P CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: 26 Procedure: 54-ISI-100-09 INozzle Dimensions: (io,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 59 End of Noz. (In.): 0 Probe Serial No.'s: Ch i S0359NF Ch 6 n/a Axial Scan Start:I -51deg @10 " -Stop: 8.56 Ideg @I 3651 Setup: 4 Ch2 n/a Ch7 n/a Files: A2271_01.32.351A2271 02.08.38 Ch3 n/a ChB n/a W' 4.,- e ,61Ch4 n/a Ch9 n/a
- * -____________, Cal Block SIN: 60119300 ChS n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 NRI 2
3 4 5 6 7
- 8 9
10 11 12 13 14 15 16 17 Data Loc. 59 89 119 149 179 209 239 269 299 329 359 29 59 Degrees WELD Noz. Loc. 0 30 60 90 120 150 ISO 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 .. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 2.83 3.03 13.36 4.01 4.73 5.36 4.21 3.60 3.03 2.83 Inches MIN. 10.77 "0 89 1.20 2.33 3.05 13.94 12.62 11.49 1.03 0.77 Inches Comments: Measured Thickness:1 0 69 teao 33 dewthnaxlpstonf 538 Limited Scan? (YINY I Y 1.7HEMIJAt*, Limited scan between 220 to 301 degrees. 78% complete Analyzed by: tm .- / _. .__ Date: 9.;Z-, 07-O. Analyzed by: .. .. ... i/A Date: 9/29/20028:15 PM Noz 26 Page 1 of 2
,, , t..
.. , " ' No zzle 26 Profile .Q I* FRAMATOMEANP " -
14.5, - .-... ~~ .... '"'S . w. ;:,< , *,,* .i.
.... ........... . . . ...... . .... ... .............. .. . . .... . ... ..... .. o.....
13.5'.. .... - .. ..... .
- .......... ... . ...L..................
.-.- .... -....... ........ -:................................, ..................... ................ .7..-tC....................... ..................... ................ . ......
13.0 ......... ......... ..... ........................... .......................
. ..................................... *I......... -. ..... .................. 1-.............................. ...---,..Z..':.; ......._......... -_ ........ .... 9 ? ~ .~
Slide 12.5 ......................-............. ................................... ................................... ................................. " . I- .. '-.
..... ............S..... ............. . ...I............ ..... ......." . . . ....
12.0 --...-...... .-..................... - - .-....... . . ................................................... -I
......... ...... ............ .. ................ ... .. _..... ......... . .. . . ........... .* .=..'....
11.5 ..........................................................................-.......................... ....... ...... ............................... I"....... ....... ......... .... ...... .................................... 1 1.0 . ................................. ................................... ............................... .... ........................ .......... ...... ................................ S..................................... .......................... - - 10.5 . ......................................................................................................... ........ ...................... .... }..................................... 1 0.0 ...................................... .................................. .................................. * . . ..............
....... ............. .... . . ......... ... . S.................................. ........... ...................
9.5 0................................................................................. 9.0 ...................................... ...................................... ... ......... ...... . . ...... . ... . ........ . ...... ............. S..................................... ............... ..................... 8.5 .. .............. 8.0.0............................................ ...................... ............ 1 ..................................... 6 ...................................... -.............................. ... ...................... ..... ............. .... ............. ..... ..... . ............................... I.................................... 67.0 ........................................................... ? -.......... .. ..................................... ..................................... ..... ............. ................ . .................................. 5.5 ....................................................................................................... ................................... .......
................. S.............................. ..... I......
6.0 . ....................................... ................. ...... .............. ...................................... ...................................... ..........
...... ....................... ... . ... .. .I ...... .........................-.....................
5.0 . -.-............... ...... ..... ........... -------------- --.....-..................... 5.4 ........................... .......... ................. .........................- ....... ..................................... I .................... .. ...... ......t.. .......... .... ....... ... ... ............ 3.5 3.0 T................. ............ ..... ................ !!!; ... ........ 2 ...... .. ....... .... ......................... S................... . *.. ......................... ... . .* . . . .'. ...... ... ...... ....... 2.0 . ,.. ....................... . . .....................
. ............-.......... Downhill Side
-- ---- ---.. .. . o 10.5 .. L .
0.5. A.".""".......,....' .z25.t......................... ... . . . . 1. I I
'.4 b';
9. 9 . 0, """ ' ;" " " '-1'00 150 : ,2 0 0 - 1 250.7,'r 30011 t~~ 56IS; &
"5 , "9 . y
,- . ", ; "; - . " . Degrees,
.,w
-2 -3 °. * ',.
",. :)... ":,*,.,300
. ,. o;* .,-," ,*
8 r;,' 999 -6
-10 '---"11
*7
]
250
! -12 IA tji It{ k1'
'3.. -1 3 14 15 -16 I2fl; Wi ,Noz. End "--1 "-i--Uphill I Downhill demarcation 'V 7:40 AM9/29/2002 Noz 26AxWal Chart 1 Pag6 2 of 2
Iu ru.: ru-1 uu-1, rw ,4-Vu-iUU-Z,3, 4 and 5 Reactor Head Penetration F IX"IME A Ultrasonic Examination Data Sheet Customer: WM.C Plant: Po ,-- 8I,-qe,~.. Unit: Penetration No.: 4Z-- Procedure: 5- ,S/- .. "O E uipment: Description VH# Cal. Due Date SN# gTomoscan ", 99/ -1 , .o-q 16 Channel P/R NZ.A I, NIA -. /1A I ACCUSONEX` Data Acquisition Software: Version 6.2.5 Intermediate Connectors: r-q # ACCUSONEXIM Data0oAnalysis ' Type: k.- Software: Version3! s. P. Cable Length: Calibration Block: "o/Jq3oE/ Calibration Setup: Scan File No.: -. "Initial Calibration File: AZZ2-- o,4. 4-'.o S- I*,lo,.., Final Calibration File: _c.,iurt-.*u rw*rb gr.*.., *. Scan Start: Z=-6.i,' Scan Start: e =- Scan Stop: Z= q? "Scan Stop: 06= W* Index Increment: 30
-Channel Angle Serial No. Comments S~~' qgc o ýs A- l y
12 Results: 1/No Recordable Indications Let. Pah D qoctd Axial Flaws Detected , Circumferential Flaws Detected Comments: Analyzed by: Level: Date: V?/z-Reviewed by: . /Level: I
-Date:
TYPICAL DATA SHEET FIGURE 5 A Z 7. -4Z . vo . ;Z - . 2 -:S 4 1q3 73416 *33 39 13? &, 173 OIL) A Z:-qz 2 :. Li . ac 2 Page 31 of 32
,C,
. Aq ZLG8
A FRAMATOMM CRDM Nozzle Ultrasonic Examination Data Sheet ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 27 Procedure: 54-ISI-100-09 jNozzle Dimensions: (In.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (den.): 0 End of Nz. (in.): 0.17 Probe Serial No.'s: Ch I S0429CN Ch 6 n/a Axla!i a3 "kt.atSt . jIdeg - " Setup:, , Ch2 n/a Ch7 n/a
* :-- , Ch3 n/a Ch8 n/a Circ. Scan Start:[ "5deg @1 -0.7" Stop:I -365 Ideg @1 8.531 Setup:[I Ch4 n/a Ch9 n/a Files: A227205 27.261 05 49 031 _06 06 521 06 21.36 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 12 NRI-..... ,
3 -4 5 6
-7 -8 9
1o 11
`12 13 14 16
_17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Nozo Loc. 30 60 90 120 150 180 210 1240 270 300 330 360 Deglrees PROFILE Noz. End- 0.17 0.17 0.17 0.17 07 0.7 0.17 0.17 10.17 10.17 0.17 0.17 0.17 Inches MAX. 3 67 3.85 4.35 5.00 5.67 6.22 5 62 4 92 13.73 Inches MIN. 1.52 1.57" 2.05 2.98 _ 4.08 4.75 1 4 25 1 3.40 11 1.47 Inches Comments: Measured Thickness: 0 609 @*theta of 290 dea- with an axial position of 1 5 041 Limited Scan? (YIN):l Y H!* l", Limited scan as follows: 174 to 205 degl /211 to 236 degl 1264 to 332 degl I total limitation 124 degl 66 % coveragle Analyzed by: -' D~ate: 1)7 E.*7o i Analyzed by." AJ/ Date: 9/29/029.53 AM Noz 27 Page 1 of 2
44 '44 - - 4.. 4,,, .44.. 4,, 44: ' - .4 4. 4 - 4 44 4 4,
**4*I44 44 44 , 4 '44 44,4*4 44 '1.4 Nozzle 27 pj.?fll 4
44
- 4. 444 4 t,
- 44 44444
.';' .4 AMA1OMANt
- 44. 444.44, *444 K .4 4
.4 .4 444 444 4 S., 4 4 '4 4 44 44 44 '4 14.15 14,0 " . . ." *- -
C44 A*, 4 4
- - ...-- 4444144 -.444
. . .4, 4 '44 4,
---------------- 44 i-------------------
I 44 *4 i r 4 4 .4 r - I
*444.
13.5 °.. ................ 4.................. 13.0 ...... ------------ - .............. " "... 12.5 --------- ------------ ------------------- S...... ..- .* .... :.
......... -12.0 ... ..............
... ii 11.5 - ---------------- Z................. -- -
-------------------- 44.4" .------ 44; *44 11.0 - .------------------.--------------..... ................- - - - ------------------ 4 ,4 4- - -
10.5 -.-- .........--------.------------- ------------------- ------------------- ------------------- S.......... ; .... - :... 10.0 -------------------- ------------- ------------------- ------------------- ---------- U 9.5 -.-- 9.0 8.5 8.0 - 7.5 --------------------- 7.0 --------------------- ----------;I-- ------------------- ------------------- ------------------- 6.5 -------, --------------.................... ------------------- ------------------- 6.0 ----------------------------------- ............. --. ------------------- ................... 5.5 ----------------------------------- ... .............. -------------------- ------------------- 5.0 ,.*. .. . W4lI4,49 UUUJWUMMMUj4U.44 9Wi,4MMD,uiurn,uiJj4 4 4 Pumwflmmmw4 4 vpuuwu.uuuina., 4, 4.5-------------------- .............. ... 4.0 ----------------- ................ ------ ............ 2.1.5 3.0 -----------------
------------------- 4 44--
2.30 ....*-... . . 35 -
-L ----------------
... a,---------------
4 - -4. 44-- DowhhIII 40 2.50'- ... ..
........... 1 -------
100* 150 , 200"'" -,:" 3/4 250 ,,
,Denreaac , -
-2 -3 -4
-7 -8
.4 5 -. 10 11 -- 12 14 -15 ------. 16 K:-
i.-~-13 Noz..End "'=-
-1
" 1 ~""=Uphill I Downhill demarcation 9:51 AM9/29/02 Noz 27 Chart I Page 2 of 2
i -w r4u.: rW-1 UU-1, 04-1-U-1UU-Z, 3, 4 and 5 lkeactor Head Penetration rFRAM, ,TOMM, MPUltrasonic Examination Data Sheet "Customer:., N, MVC Plant: ,-- -k, Unit: Penetration No.: ,78 ! Procedure: 5q- S/- .1oO-'D* Equipment Description VH# Cal. Due Date SN#
ýfTomoscanl "1"'*' "/*-;/03j -o.q 16 Channel PIE N /A N/A.M N
ACCUSONEX*M Data Acquisition Software: Version 6.2.51 ACCUSONEX'm Data Analysis Software: Version 35 .T.B Cable Length:- SO' Type: k6- t-j-q # Intermediate Connectors: Calibration Block: 4/qo~ Calibration Setup:
! (,,o/i'*3o *'1 Block:422-7"2 I Scan File No.:
Calibration -Zo. go. I Scan Start: Z - 0 Scan Start: e =
.'2 Initial'Calibration File:
Scan Stop: Z = 9..r Scan Stop: e = r
,.7J.q Index Increment: 30 Channel Angle Serial No.- Comments St 5" "1. .50 q/0'oC Results: eor able Idications Leak Path Detected C-Axial Flaws Detected Circumferential Flaws Detected Comments: rcr,.*'- ,
/
Analyzed by: Level: Date:,. " Reviewed b :Level: -Date: 1aO.9-cZ--
"6/-TYPICALDATA SHEET FIGURE 5 J? o13Do Page 31 of 32
A D ~i.- 3IL" JII IJacL Customer: . ... ..... Nuclear Management Corporation -. - -* e ..- Plant: Point Beach
**. , ,IIIINIA 311 Unit: 1 Procedure: Nozzle: 28 54-11-100-09 Nozzle Dimensions: (1i.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (del.): 318 End of Noz. (in.): 0 Probe Serial No.s: Ch i S0440CN Ch 6 n/a Ctlr~J! * * * °Settzp!t!u i~t Ch2 iles. :
n/a Ch7 n/a
- ~ g"u "Ch3 n/a Ch8 n/a Circ. Scan Start: 0 deg @~ -5 8.56 deg @
"Stop: 365 Setup: 3 Ch 4 n/a Ch 9 fl/a Files: A227220 40.29 Cal Block SIN: 60119300 Ch 5 Depth n/a Ch 10 n/a End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min MIn Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 NRI 2 A 3
4 5 6 7 8 ' 9 10 11 12 13 14 16 Data Loc. 318 348 18 48 78 108 138 168 198 228 258 288 318 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 MAX. 2.54 2.78 0.00 Inches 3.38 4.04 4.72 2.74 MIN. 0.75 086 1.35 2.54 Inches 2.07 298 086 Comments: 0.75 Inches Measured Thickness: 067 Q theta of 80 deU with an axial position of 6.24 Imlted Scan? (YIN): y Y I' eJ Limitation from 89 to 261 degrees. 52% coverage. Analyzed by: 444r,..* Date: . . -p t- Analyzed by: m Date: W 09-.ro.',v 9/29/200210:16 PM Blank Circ Data Sheet (2) Page I of 2
*1
.4 FRAMAir , o'.'2' :
. .,...Nozzle 28 P'rofile II S.. . ...............................
14.0,~- .................
. .. ........ * *4'~
14.0 .............. 4......... .. ...... .............. ...-..... .........
.,* Uphfl t2:
13.5 . ..... . . .............. ........ .................................. ........ ......... 1 12.5.0. -..........-. . . . ..... ..................................... ....................... ............................................................
........ .. . -. -........... ......... :- ,.. , 1- -7 7 ;
T Si .
,6t .de-:
j4 1 3.0 -----------.-............ ..................................................................... ........... .-- ................... ....... 1 11.0 ............................ . . ................... .................. 10.5.....................................................-.-..-. ................................ . . . . ...................................... . . . . . . .... o.o 0.................................... 10 . .................................................................... 1.05 ........
-.. 9.5..........
.................. 6..............
............. .I .= --
.i ..........
10. 0.0 ............... ..................... I....................::
...................... ........ .. ..........................................................................- iii~ =:=2=-i - .
9.5 ................................................................................... -............................................
.0 .................................................................. . . .... ..........................
85
.5 ...................................
.5.............. ....
7.0 ....................................
- 4. , . ... ................................
................ ................ ..... ..... ................ ... 6.. ......... .... ..........................
4..5.- ... . . .. . . 4 5 ........ ....... . . .. ...... ... ........ ... . . ......... ............ ....
~ ~ ~......
5.0...... ~* i .............. . ............. ........ ....... . .......... '.......... ... . ....................... ........ ......... ..... ................. .. . ....... .. ........ ... ...... ...- :-............ ........ -. . - ...
- =. L . ; *....,
2.0 . .................... .. . ........ .... 2.. .... .......................... 5 .5 .................... . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .... ............... ...... .......
. . . Downhill Side 0.5 1.0 ....... .. .-. 4..... ........
..- 4.A.......
. . ...... ~.....-...
. . . I.............
.............. ....-...... , ..... . ..... 6... .,-, ...
.0.. . .
. . . . . . ..... . ..4 . .. .. -
....... ." . .; 4 ,Z,
-z.t&IV 4-
'y 0 . ".44'i 509' ". 2'100" 150 I 200 250- .,- -, 3009 4.t¶.735Q%,
,., - ~~...*.,.. 4 - 4 .4 6% 61% 4 4
S ...... -2 --- 3 44 913 10 11 12 I,
- --- 14 -16 1. I
"- Noz. End 1'""---'Uphill / Downhill demarcation 2..
4444 N 644$ 10:15 PM9/29/2002 usbladeprobe-Pt.Beachi.xis Chart I Page 2 of 2
"FAMATTOME Customer:
AN13 CRDM Nozzle Ultrasonic Examination Limitation Sheet Nuclear Management Corporation -. lnt oint Beach j*it Nozzle:-'-* , Procedulr...e: 54-ISI-100-09 Nozzle imenion's: (10.) ID: 2.750 OD: 4.00 Thickness._ 0.625 Downhill Side of Nozzle (deg.): 318 End of Noz. (in,): 0 Probe Serial No.'s: Ch 1 S0440CN Ch 6
'Oi" n/a dei- ChVs n/a Ch 7 n/a e*-'1 .14"-'. t. ,~iv
,,*"A .VP, Ch 3 Scan rtO d g 0 n/a Ch8n/a
- :ic
*T @ 3 5 e u : 3 Fls A2272.20 0.29 Ch 4 n/a Ch 9 n/a Cal Block SIN: 60119300 Ch 5 n/a IAcquisition Instructions:Ch0n/ Ch1 /
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred.
For example, current limit activated, probe stalled on upward stroke, rotational I tpe cnwe stall occurred. a ecame to.tgtt scan.
.A ..-
- 2 Scan himie fo frm 9too2d. rees. A'-t'otal of 172 degrees.
8 9 14 10 15 16 17 12 IT-I 14I is II 16I 17 18I 20 21 Acquired By: Date: ;z -. - 9/30/20021:40 AM Noz 28 lim Page I of 2
l-W rvu.: rW-1 UU-I, 04-rL-1 UU-Zt 3, 4 and 5 Reactor Head Penetration "Ultrasonic Examination Data Sheet IPlant: , leAI Unit: Procedure: 5'- isi- o-e* ACCUSONEX' Jm ACCUSONEX "Data Acquisition Data Analysis Software: Version 6.2.5 Software: Version+/- 3*.?,. Cable Length: - Type: Z&/- i,4-q Intermediate Connectors: Calibration Block: & o1yq3o,6r1 'Calibration Setup: Scan File No.: :z2.70_o z- 3-7. 25 Initial Calibration File: A -zz. -o.JQ, Z7
* ., Final Calibration File: *,,nn-7urjrp Scan Start: Z = -. ? Scan Start: e =.S" Scan Stop: Z = x2 "Scan Stop: 6 = 14 Index Increment: 30
/
i J( lI TYPICAL DATA SHEET I FIGURE 5 (bIjslc Page 31 of 32
A -. LIUJI nee Customer: Nuclear Management Corporation .. Rfl M Ir.,.I.n _ a.iU 3.La neet Plant: Point Beach Unit: 1 Nozzle: 29 Procedure: 54-ISI-100-09 INozzle Dimensions: (1h.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (de*J.): 229 End of Noz. (in.): 0.35 Probe Serial No.'s: Ch 1 S0375CN Ch 6 n/a MIA~ de"@ 1 1 td:I Ie@ ŽW 4Setbf ' Ch 2 n/a Ch 7 n/a 4'A "?X~ ~ d~~. ~~ ~ >~4~ Ch 3 n/a Ch 8 Circ. Scan Start:l -5 deg ,-I -0.7 " Stop:, 365 Ideg @ n/a
.521" Setup:[I Ch4 n/a Ch9 n/a Files: A2270.03 07.291A2270_03 33 04 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI ,
2
-3 -4 -5 -6 -7 8
9 10 12 13 14 15 16 17 Dt Lo.29 29 289 319 349 19 49 79 109 139 j169 ...199 229 Degrees' WELD Noz. Loc. 0 30 60 90 120 150 1ISO 210 240 270 -30 30 360 1Deg]rees POIE Noz. End 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.3 0.35 0.35 0.5 nce M. 3 23 3 38 4.35 5.-14 5868 6.13 16.10 5.90 5 32 4.58 3 87 3.31 3.23 Inches
,MIN. 1.23 1.55 2 24 2.96 3861 4 63 14.78 4 8 3.56 2 80 .... 1-91 1-38 1.23 Inches Comments: Measured Thicknes O 7 @heta of 50 deg with an axial position of 1 7.261 Limited Scan? (YIN): N -Analyzed by: ,,/,,*_ 't ."Date: 74_,d 1- Analyzed by: */*Date:
9/27/200211:58 PMNo Noz 29 Page 1 of 2
iN. A',
- 4 ';' FRAMATOME ANP ' " *~~ 4;r' I.- , .,'J', -d S15.0 [: *'j:>. " ' , "
15, 14.501.0-......
- 2t'.
l2 Profile.. . ......
......... : ..... ~ '< ' ".n, .* h S....... ........... .:_.......... :........... ........ . * , ,,;. ,o 13.5 . ......- .............. ...................
13.0 ............ .......... .. ...
.*.. ..... l *,
12.5 .-................. ....-.............. ............-. ............... ............... ... .. ............. ........... ............. ....S........ .......
............................. . : .. ... ,i: * -8r d*'.....
. ... a: ,
12.0 ............................ .... ... 1.5 ........... ........... .................. ............. ........................... .... ........ .......... 11.5 ................................................................. .................. 11.0 . ..... ...... ............... .... ............ ..................... I..... ........ ... ...... ... 10.5 1.............. ................... ..... .................. .......... .................... .....
. .... . ........ .......................S....... .... ........... ......
10.0...... . . ...... ..................... .. 9.5 ......................... . .... .... 9.0 ............................................ . .. ............. 8.5 4 ................................ ... .. .... ....... ........ S................................. I ............................. 8.0 .. .. ........ ...... ..... ... .S.... ...... .......... ..... ... i.... ................ I ..... ... ......... ..... . 7.5 .... .......................... . S............. ..... ........... i... ....... .............. ..... 1"............... ......,"......... S.................. ... ............ I ....................... . .............................. 7.0 ............. .......... ........ . 6.5 .................... ...... ...................... .......... . 6.0 ....... .............. .. ... .. ..: 5.5 ....... ... ............. ....... .. ........ ..... ... .... ..... 5.0 ....... ................. !..... .................. ......... .................. .. . ..... . ..... ....... ........ 4.5 ... . ........................................ 4.0 -- . ....... . .. ........ ý................................ ............ . ...................
............ . 1..................
3.5 ....... ..... . ..... ...... 3.0..... ................ ......................... .. ..... ................ ....... ...... ....... .... . .......... ..... ............... ;................ ............................. ..... 2.5. --- -- ------ ... ..................
..... .................................. ....... ..... ................ .......... . ----- ............. ..... .......... ........................ ...... ... Downhill 2.0 S............... v .............................. ...... .... .....
............................ ',.;'-, t,-,..'-;.......
.*..:..-.-L "-i*.'....,-:
1.0 .... .......... ..... ................................. .... ................. .......... ............................... ..S............................. 6. 0.5 -- .............................. . .. A.......... 0.0, I I r1. I I I I ' 'J'.zz
- ..- t 5, - , 100 150 .. .,200 250: _3oK 300' 5 -6
-2 --
*7 3 4
-9 -- 10 8
-- 11 _-12 'it 13 S..- 14 15 -16 jt
-.--= 1 40' in Noz .End -Uphill I Downhill demarcation I:it."
44
'I 12:11 AM9/28/2002 Noz 29 Chart I Page 2 of 2
I ma r- ,.: rw-luu-l, 4ý-.V-I UO-z,3, 4 and 5 1 I iReactor Head Penetration £ -. FAMATCMr-A " Ultrasonic Examination Data Sheet Customer:. WM Plant: co4- Be*,*-k Unit: Penetration No.: ' Procedure: 5q- ,S/- ioO-D* Equipment: I U*.LCjjpn LvON Cal. Due Date SN# gTomoscan "" .q 16 Channel P/R 2 N/A , N/A ACCUSONEX' M Data Acquisition Software: Version 6.2.5 ACCUSONEX "M Data Analysis Software: Version 3:.-' Cable Length: ot' Type: e- i'1-q / # Intermediate Connectors: I Calibration Block: (,o/2, 3o&7/ Calibration Setup: Scan File No.:.,t 22 2 - ..- /is, sy-.kr Initial Calibration File: 4.2= 7a -127....
". 9. . 4..? Final Calibration File: ,ýO.rrM pz',,,wvcz Scan Start: Z- .0 Scan Start: 0 = -5 Scan Stop: Z = S3", Scan Stop: 0 =X.65 4 4iW^ Il'L,-Chann el I;Anql, I S / ; 650' I ii
'PICAL DATA SHEET t
FIGURE 5 f 9-30 Page 31 of 32
1 Ac CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: 30 Procedure: 54-ISI-100-09 Nozzle Dimensions: (It.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 119 End of NozL (in.): 0 Probe Serial No.s: Ch I S0445CN ChS n/a ________________e_____e___________________________ Ch 32/ Ch7 n/a
'91 -' -. P1Vde @ Ch2 nia ChB n/a Circ. Scan Start: 0Jdeg @1 -5 1 Stop:. 8.56 Ideg @1 3651' Setup: 3 Ch4 n/a Ch9 n/a Files: A2272 18 51.59/..18.59,45/_19.22.33/_19.36 43 Cal Block SIN: 60119300 Ch5 n/a ChI rn/a Depth End Point 1 End Point 2 Axial Adljusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (In.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation MIn Max 1 NRI 2
3 4 6 7 8 9 10 11 12 13 14 16 17 Data Loc. 119 149 179 209 239 269 ...2.99 329 359 29 59 89 119 Degrees WELD Noz, Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0,.00 0.010 0.(10 0.(10 0.00 0.00 0.00 Inches MAX. 2.74 2.78 13.29 4.00 4.79 4.22 3 26 2 88 2.74 jInches M. 0 61 0.78 11.19 1.88 2 93 2.45 1.28 0 66 0 61 lInches Comments: Measured Thickness:1 0 699 theta of 1180 deg with an axial position of 5 341 Limited Scan? (,/,N): Y M,=MR*11[ Limitations from 38 to 47, 86 to 140, 237 to 354. 50% Coverage Analyzed by:__" j ----- Ote: Da 9,a*Oz Analyed by: /9Date: 1 C14" 01 -3o-o7-9/30/20021:32 AM Noz 30 Page I of 2
A 9/30/20021:31 AM Noz 30 lira Page 1 of 2
- 4 S..
44 4 4 44 4 4 Nozzle 30 Proile -. :~ ,* s ~ ,. t.~~
- 4, .4; 4., 4
, FRAMATOME ANP 44 I*.0 , ,.,?4.. , , - 4 4-. 4 4 4!
15.0 -1 1 14.5t 14 ........ 0
- 12. ' ..................................
13.5 - _.-". I.....
...................... .... ..... o.
-~ . - ... *.. ... ...... .. 4 U p~'
13.0 --
... ............. ... .... ............ .......... ....................... o. ... ........ -..............4....... .....
12.5 ......................................... .......... ... 12.0 ....................... .......... ................ ... ............. .... .... .......... ............
.o 11.9 .................................................
10.5 ...................... 19.0 ............. 1 '..
- 9. 0 . ................................... ................... .....
8.5 II I . . . 8 .00 ....... ........................... ........................ ........ .... ................. . .... .......................... 7.5 . . . . . S......... l........................ ......... . ...... 7.0 ........................ . . .
. ......... l .... .......
6.5........... ... .......... ... 6.0 ......................... .. ................. .......................... ............. ........ ................ . ........ ................... ......... ................. ...... S........................ .. ....... 5.5 . ................................ ........... ................. I................. ... ....... .... .... ............. ...... ....... ............... 5.00..........................
................... ......... ........... ............... ..... .......... ...... ... ....................... ............................... I .... ......................
4.5 .......... . .o........... .. ................. .. ............ ......... .................................. ................. 4.0 ............ .- .~~~~n ........ r -.... 3.5 .............. .. .. ... ......... 11il .......
.-------- .-- -I - --- - -- ----. --- -
. ....... i........ ..... .... ... ......
3.0 .... ... 2250
.5 .: ...... ... ..... ............. . .... ............ ............ .......................
............... .. I(.
.... ... .............. S.... ...................... .....................
.......... =............ . .. === .. =====
.==..... .
.................. ...........I...................- ... 4................. ....... ............
Downhill Side 150 - . .. 4 . 1.5 ------------ - ------------ -- ---- 4 ... ..... f .................................. . ................ .......... S... - ----)-[--,----L--':*--: yT--- 0.0 .
-0. .....----O ....
t-................ -.
-I ....................
................I
. 1..........
.(........... .. ......... . .4 ..... ....
4 4 44
.J
~ . 4 0.0 . I + - 4-'
,' 0 ,, :* " .:k,'50 100 150 200 25 300 ,' ,0
'44 %! .4 r.. N¶(.4.. *414;Z
-2 43 4
]
5 4 UK -2 6 -7l
- 9 10
- 11 - '12 'ON*
4 .4 . 13 -.- 14--16 12; - Noz.-End -'--1 iUphill Downhill demarcation 9:07 PM9/29/2002 Noz 30 Chart I Page 2 of 2
6 (Ec ý)/Aje iw rlu.: rW-Iuu-1, 04-tU-1UU-Z, 3, 4 and 5 I SA Reactor Head Penetration
*O*MAM ZtM AM'P Ultrasonic Examination Data Sheet Customer:' NM CIJC. Plant: P, 6eA,,A Unit:
Penetration No.: 3 j Procedure: 5Ls/-S.oO-"o* Equipment: Description VH# Cal. Due Date SN# Tomoscan "1 16 Channel P/R N/A ' N A/,I ACCUSONEX'4 Data Acquisition Software: Version 6.2.5' ACCUSONEX'm Data Analysis Software: Versionq .e& s.Sf Cable Length: SCI Type: Ze/- tý-q # Intermediate Connectors: I Calibration Block: (.o//q3o r1 Calibration Setun: Scan File No.: A9Z?.I*Z-01*.-i;, wt", Initial'Calibration File:ScanF i - oA/.,45, co Final Calihraflnn FiI*. ..s Scan Start: Z = , zo"Scan Start: 0 = -s' Scan Stop: Z = - Scan Stop: E = , Index Increment: 30 IChannel IAncile Serial No.-. Comments
- 5 L 0-10 4' .- ;
IN Results: .No Recordable Indications Leak Path Detected Axial F aws e ec ed Circumferential Flaws Detected Comments: -Analyzedby: b Level' Date: Z'./ -t Reviewed bty: -Level: _Z17Date: /0^'/ 4 Z-.
"TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FPAMATF'rM AINF= Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: -31 Procedure: 54-ISI-100-09 Nozzle Dimensions: (11.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.): 14 End of Noz. (in.): 0 Probe Serial No.'s: Ch i S0429CN Ch 6 n/a Ax ial s &A* n `,- ~a
*, *,S t j. g . , d 691,@ I . 'I i"",' .",S to p . I
, j'*: ".: d ec-, n aC h
______ _____~dY.'QS::ý~ Ch3 n/a Ch7 n/a Clrc. Fies: Scan Start: L A2272_07.07.46 -5deg Stop:1 -365 Cal BlockIdegSIN:
@1 Setup:[93 8.57' 60119300 Ch4 ChS nla n/a Ch9 ChlO nla n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI 2 -3 -4 -5 -6 -7 -8 9
10
-11 12 13 14 15 16 17Data Loc. 14 44 74 104 134 164 ..... 194 1224 254 284 314 344 14 Degrees 120 150 180 210 240 270 300 " 330 360 Degrees WELD Noz. Loc. 0 30 60 90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches PROFILE Noz. End 0.00 0.00 0.00 0.00 4.34 5.11 - Inches MAX. 3 15 3 65 1.49 2.3-5 -3.28 Inches MI1N, 1.13 Comments: Measured Th ickness: 0 651 @ theta of 1251 deg with an axial position of 1 2 471 Limited Scan? (YIN): 7y %,-.*j;*'~
Limi~ted scan as follows: 0 to 10 degj / 120 to 360 degl / total limitation 250 degj 31 %coveragle The downhill side of the weld was located in the limitation region. 14 degj isthe start of the scan.
-I2 __--..( ; Date: /2/o-Analyzed by: /Dae Analyzed by:
cater" &I-a P- 'ý. 9/29/0210.20 AM Noz 31 Page I of 2
Z0Z -e6d 1.1.JetO 1.£ZON Z0I6Z/6V4V 0Z":0L uo1eoiewep IIP.IUMOO I PU3 -ZOf'NM .ým 91. 1.1. 0M 6-U-- £ 9-
£ 9 9.9d 9 9 , I 9' .. "..', 9* 9 9.*;'
- seeji~ea 2> .i90rw',
.4 09 o0z 09M 00 . 9 0
- -- ----1p 00
......... ----------- ------------- i...... ------------------- -------------- ....................
. . . . . . . . .9. . . . . . . . .
..- .... 9*0 vo -------------------- ------------------ ------------------ ---------------
7,- 1
---------- 17------- 07I
------- 7----------- -------------------- ............... 97I 1114UMOCI --------------- ------------------- ------------------- ................... -------- ----
~
~n j ~ ~~ I s ~m w ~n ~ l~
*OTk ia bi - - -- - - ---- - -- - - - i i Ria iu inu ~n u u u m~!au mmm mn ! N-x 1 9. I U I 5 I 1 l' 1 I U 1 u ! u 1 mf 11 W 4IU
*9*9
---------- z-------- .................... .................... *9*9 I- - - - -- -- - -- - - -
- 0L I.................. -------------------
------------------- -0*9
.................... -0'6
------------------- ------------------- ------------------- -9*6 I------------------- ------------------- -------------------
- 0WI Tot0I O*I1 -------------------
------------------------ -----9
-OWII
'kk
- 0 ',
li9id -------------------- ------------------ I -------------------- --------------------
. 1.
',-7 ---------- ......... -------------------
------------------- -- 9
- - - -* G-
- -I--- .... 9--- ....
*O 9 . * % 9 - N 999PjflOJd LCOIZZON
Pl-AAV FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations P NO.: PQ-100-,ROCEDURE NO: 5454-PQ-100-2, 3, 4 and S Reactor Head Penetration F4XVIAXOME ANP Ultrasonic Examination D.ata Sheet Customer: "vMc Plant: ,,.' *, e-A " Unit: I Penetration No.: Procedure: 6'q-1S/-/1,9--
"i Of E ui ment:
Description VH# Cal. Due Date SN# 4Tomoscan ,z7o 71L 3 A0317 16 Channel P/R ACCUSONEX "Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version -TIT Cable Length: 5o0 Tp e: R * # Intermediate Connectors: I Calibration Block: &o//1,3z/01 Calibration Setup: IScan File No.: o,9p 72 /*;*-/. Y3 Initial Calibration File:,q,6*, - /0.-2. 30 Final Calibration File: ... o02" Scan Start: Z = .0 Scan Start: 0 Scan Stop: Z = -yo,'Scan Stop: 0 = Ys-5 Index Increment: 30 Charin I Angle Serial No. Comments Z- 6" - 3zo'-/'
- 3004!. 3 *Zo27* "I.
3 . &,,O% - s5o o
,o'5 350o2.
3 Results: e Leak Path Detected *t. Axýial Flaws Detected Circumferential Flaws Detected Comments: AnalI Date: /e0 -'-0b-eviewed by: Level: Date:
"-'TYPICAL DATA SHEET FIGURE 5 Pace 31 of 32
- 0, R.
A 6 CRDM Nozzle Ulitrasonic- 17Ymminnfinn nflnf Qhnn Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 31 Procedure: 54-ISi-100-09 Nozzle Dimensions: (i,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 49 End of Noz. (in.): 3.22 Probe Serial No.'s: Ch i 35044 Ch 6 35052 lit,_ t -;-". 4$etup:j : -~:rCh2 35202 'Ch 7 n/a Sn, Ch3 Circ. Scan 35070 Ch8 n/a Start:I -51deg @1 0 " Stop: 365 deg @L 2007' Setup: I Ch4 35044 Ch9 n/a Files: A2275_18.04.33 Cal Block SIN: 60119300 ChS 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (In.) (deg.) (in.) Ratio Orientation Mmn Max I N1 2
-3 4
5
-6 -7 -8 9
10 12 13
...14 15 16 17Data Loc. 49 79 109 139 169 199 229 259 289 319 349 19 49 Degrees WELD Noz. Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 3.22 3.22
. 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 Inches MAX. 6.48 6 69 6864 7.15 7.76 8.17 8 83 MIN. 9 29 9 29 9.14 8.73 6.89 6 48 Inches 1 4.29 4.34 4 49 4.80 5 31 5 92 6.69 7.45 7 51 7.15 16 59 4.49 1 4.29 lInches Comments: Measured Thickness: 10 631 @ thet ofl 2891 deg] with an axial position of _10491 Limited Scan? (YIN):l N I Analyzed by: DateF /-av '/%Z_- Analyzed by: A//,A Date:
65'7 1013/022:29 PM Noz 31 rotating Page I of 2
21, "; .- , . -', ,k.
'U'. .. FRAMATOMEANP " I 't", . Z ,,W.'2, 1 ' "-: -. ,, .,. , - ,
" , ,15.0u .~ ' ° o'*" ...*" 4'- ~ -"- ;' ," " " ,... . "-" . , -- -.............
14.0. ..... . ..... . ....... 1 3.5 . ... , . . ................. .. .. ...... . ..... . . .....".. I,': - 1 3.0 - .... .. . . .... . . ...... ....... .... . ... .. -..-... .. . . . . . . ..... .. ... ... ...... ............. . .. ... ,.' 2. :Z . phi. 12 .5 -- . - .... .......... .. . .. . ......... . . . . . . . . ..-.. 12.0 ........................ .... .. .. 11.0 - ... S....... S...............................i S................................ S................................ 10.5 . .............................. i.................................. S................................J 10.0 ......... ......................... 9.5 . ............................... l............................ 9.0 .....................
............................... =7ýý ..........................
8.5 .................... 4-- .............. .............. ............ ..... ............................ mw_-1 - .. ,"' 7.0 ............ ...... 6.5 6.0........... 5.5
............... [........... .............. ......
4.0 .. .........................
.5 ...... ........................... ..................................
4.5 ............-.........-......... . ... .. ......... 3.5 ........................: ............................................. l11 i........1....... !
.I. . . . . . . . . . . . . . . . . . . .
i- .............. ill I ..... bm , 2.5 3.0 3.................. 2.5 ..............
...2 :.......
- ......... I***----
Io.. .... ............... I ..
............I
....................... . I--.--------..------------.----.....
............. 1 S.................................
4............... . . .
......... L-I --- -------
ý I. ..... .
- .i...#.:.
Downhill Side 0.0 -................... ......... ... I.. .. 1.5. 0..;"-, 0.5 "
,2...
~,'.
.....:-..10 Uo*
-I- 4 '
0 ,150 200 2501, , , "
.1 * . ,
-2 -3
-5 -6 -7
- p. -9 -10 -- 11 p -13 -..... . 14 i- Noz. End 15
* ,Uphlll I Downhill demarcation 2:14 AM 10/3/2002 Noz 31 rotating Chart I Page 2 of 2
P o1/LM FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-IS-.100.09 0 PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 "A. *Reactor Head Penetration FRMA", A NP Ultrasonic Ex'amination D~ata Sheet Customer: M-/WC Plant: PoIAM, Be,,wA Unit: Penetration No.: Procedure: "q-l-/ "j Equipment: Description VH# Cal. Due Date SN# gTomoscan /7z. o ;zo3 14 16 Channel P/R W,!1 ACCUSONEX"4 Data Acquisition Software: Version,6.2.5 ACCUSONEXm Data Analysis Software: Version,3- 3.,5 1 Cable Length: 5 O0 Type: RG-'L1-A # Intermediate Connectors: I Calibration Block: 6/I.v/Calibration Setup: A2213- 0.qb. j!r Scan File No.: Initial Calibration File:.Ajj4.2%-4 A M Final Calibration File: , ZZ.... Scan Start: Z = 6.o" Scan Start: 0 = -5 Scan Stop: Z = .2-" Scan Stop: 0 = Index Increment: 30 Chan el Angle Serial No. Comments 11 6- 1- :5 Z 3 v".- 13 5"zo Z * "F.D 3 1., 35070
&eo-g 3 6 okz C4 35052.
Results: No Recordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed*by: , 6.0Date: z Reviewed by: Level: Date: /0/i / -_. TYPICAL DATA SHEET FIGURE 5 IDý\ov1 Page 31 of 32
4= A CRDM Nozzle Ultrasonic Examination Data Sheet F FtALM ATD?ME ALt%1 F3 Customer: Nuclear Management Corporation Plant: Point Beach . Unit: 1 Nozzle: 32 Procedure: 54-iSI-100 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 53 End of Noz. (in.): 3.3 Probe Serial No.'s: Ch 1 35044 Ch 6 35052 Axlal.. * .St... .. ?A ..... .I [',st,, I.' - I. g1 - . P ; ";"Ch2 35202 Ch7 n/a
. ....'-.ý, . . . -.. . Ch3 35070 Ch8 n/a Circ. Scan Start:[ -5deg @I sop1 20.07 Ideg @1 Sto," 365' Setup:I I Ch4 35044 Ch9 n/a Files: A2275_19.01.26 Cal Block SIN: 60119300 ChS 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 OD 058 6.1 131.0 6.5 143.0 0.39 78.0 90.0 0.42 \ 0.57 47 0.05 0.08 Vol 4.2 6.7 2
3 4 5 6 7 \ 8 9 10 12 13 14 15 17 Data Loc.' 53 83 113 143 173 203 233 263 293 '323 353' 23 53 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.30 3.30 13.30 3.30 3.30 13.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 Inches MAX. 6 29 6.29 6 33 6 65 7.23 7.91 8.49 9.07 9 25 8 89 8 42 6.33 6.29 Inches MIN. 3 85 3 88 3.95 4.21 49 .9 6.94 7.63 7.63 7.30 6 62 3.85 3 85 lInches Comments: Measured Tickness:I 0.635 @ theta of 12 e ih an axial position of 9 45 Linmi ted Scan-? (YIN): N In-dication #1 Is located at weld root Classified as a fab indication Analyzed by: * **Date:- /40*/ 7;7- . Analyzed by: 2112T* Date: 10/3/022:18 PM Nozz 32 rotating Page 1 of 2
JO0 SEecd 0 . PL4 BunlePo Z ZZON ZOlClOWMd tZ: UOiieaJewep lli4UMOO I lliqdnm.m.m L pU3 "2ON. 9* 6-
%7 L* 9-
, A ,, ,0 ,
,.9 . . 0. L-_.
A'-- S..... ... ,. ."..... '4.. 0"0 r,-,4,,
- 1.
- - - - - - - .-- ----- ---------- - . , '4 -
4 I , 0*"0
--- --- - - 7
. . f- ... . . .. . . . l......... . . . . .
4,~ --
------------------- I-.. . . .. . . . .' -- -- - ----- ---
III.Uepl0 -------------------- ---------
,IiIquMoo ------
------ -................... - - - ------- -OfU
- Y 9m
------------------- *-------------------- h St
------------------ ----------- -------- OT
----------- ------- ------------------- ------------------- ------------------- ----------------- ...........------- ----------- -------- 0
------------- ---------------- -------- ------------------- ------------------- ----- .. ------------------ ----------- ------- 9L*O 9'97
-------------- -- ------------------- ------------------ ------------------- ------ ----------- ------------------ ----------- -------- 0.9
-------------- - ----------- 9"9
----------- ------- L
...... ----------- -------- - ---------------------- ----------- -------- 0-9 LL
- I 333S4W S I. -r.mmwmw ww"m...--- ----- wwmwmv$,"wwA L
---------- -------- -------- 9OI
-----L -- -- -------------- ]-.. . .. . . .. . .
--------- 0.GI 99
-----------.35----- ----- ------------- -----.. -0 "1,1
- - - - - - --- --- -- - ------ ------------- 9's4
'5. -. - -------------------
4.. ------------------- -- - - -- - ---
-. -- - ---,- 4 .
'4- * ------ ----------- ----.I. ......,-.----.... G'6
--------------- -- -...------..... i- , ,O'l.
--- 4--- -
.'U'7ý
---------- ------ : --- -- *.:. Wet0"#
I POJd WI:£eZZON ,, ONV a*o.vwvivz
,1'5
.5 r *1 44
I re Pu.: r'.i-'UU-1, D4-tLJ-1 UU-Z, 3, 4 and 5 I A "Reactor Head Penetration 1RA4WATME-* A Ultrasonic Examination Data Sheet Customer: WMC Plant: + - I*..Unit: '. Penetration No.: 32- Procedure: 5q- I-/5eO-0D'i [-qUlJJi&lICL, Description VH# Cal. Due Date SN# gTomoscan -1 zo-*q 16 Channel P/R IN /A N1 . /A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX_ Data Analysis Software: Version . Cable Len th: G0 Type: I?&- -4n-q # Intermediate Connectors: I Calibration Block: *(,ol I q3 E/l Calibration Setup: Scan File No.: A 2272- 's- .4a:J Innitial Calibration File: A.~-'.' Fnal Iq~it!'. Calibration File: c,1ý*, v~ PE Oam Scan Start: Z -7' Scan Start: 0= Scan Stop: Z =S7Scan Stop: 0 =-74-r Z73.9j Index Increment: 3-Channel Angle Serial N'- . Comments I 5"0j,. 5o,./*qc:N Results: -ordabl Indi Leak Path Detected
- Ial Flaws Detected Circumferential Flaws Detected Comments:
Reviewed by _ Level-
- Date: /*z/*-_
TYPICAL DATA SHEET FIGURE 5 69-30-02-, Page 31 of 32
R A IAZrcM AN1 CRDM Nozzle Ultrasonic Examination Limitation Sheet Customer: Nuclear Management Corporation IPlant: Point Beach Unit: I Nozzle: 3Z. Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch i Ch 6 n/a O~fare- ~k~ ~~ _____ ' h n/a Ch7 n/ ME1 flva-1 M W ~~'Ch n/a C8n/a Circ. Scan v Start:[0 deg @L._...J" Stop:1/6/oj9_Ideg @I j' Setup: 3 Ch4 n/a Ch9 n/a Files: A7Z.T272 -13, .1I.0.l,*j6 .'ZO. q Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Acquisition Instructions:
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred. For example, current limit activated, probe stalled on upward stroke, rotational stall occurred.
1 -S+opped XC~j ,r 141-370 dy. 4-p 66'n t~ckbl_ -to !T-, vgzsa gtij 2.2' 2 WAS /WUO UIV~hLd 'ro Aecav. A9gri ~W~l ~ T~ p~c j~ r~~ 3 C-V OP ~b WS 4M7cJ-kM'J& <,A) -rM5: /--V 6r -7WL- EyN.E" 4 5 7 9 10
- 11 12 13 14 15 16 17 18 19 20 21 22
-,ired By:e~av 6 9 Date: 91Z) 2-9/2 I PM LinSheet le 1 of 2 F* 'N*,-C4
KC)t4ýý /V 7. FRAMATOME-ANP Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 509i
.A Reactor Head Penetration SFRU IM C- M P Ultrasonic Examination Data Sheet Customer: NMIC Plant: PoT,',.i &*A Unit: I Penetration No.: _T7 Procedure: .
Equipment: Description VH# Cal. Due Date SN# gTomoscan jz.7o T o317F 16 Channel P/R u/A ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3--a'7. IV Cable Length: Sol Type: R.,- 12A # Intermedi~te Connectors: I Calibration Block: "4e// 3DO/I Calibration Setup: Scan File No.: ,,P'2 *I--,.. ,. ' Initial Calibration File: q 22z c- - ,-. 9'. X
-R,* .-
V:.
/"Final Calibration File: Az-7.-_'=ZiZ.. _'7.o-"
Scan Start: Z = c, Scan Start: E =-s- Scan Stop: Z = 20.07 Scan Stop: 6 =.Ti'" Index Increment: 30
-Channel Angle Serial No. Comments 6 ° .35oq 3 - &.05 ss5oo Results: -No-Recordable Indications- Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed b: - Level: Date: lO-2 ;z -e7 Reviewed b :, Level: Date: /O-/'. "* TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
.A CRDM Nozzle Ultrasonic Examination Data Sheet "-.3 Customer: Nuclear Management Corporation Plant:- Point Beach Unit: 1 Nozzle: 4 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 176 End of Noz. (in.): 3.36 Probe Serial No.'s: Ch 1 35044 Ch 6 35052 L110prd; Iý =""~; do ! 1ýtP ~4i 1 Y.'.eg'J. Ch2 35202 Ch7 n/a P5a4 ?V*' ~ J Ch 3 35070 ChB n/a Circ. Scan Start: -51deg @I j" Stop:1 365 Ideg @1 20.07j' Setup: [ Ch4 35044 Ch9 n/a Files: A2275_19.56.05/_20.17.24_20.51.24 Cal Block SIN: 60119300 Ch5 35052 ChI0 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (In.) Ratio Orientation Min Max I NRI 2
3 4 6 7 9 10 11 12 13 14 16 17 o Data Loc. 176 206 236 266 296 326 356 26 56 86 116 146 176 Degrees' WELD Noz.- Loc. 0 30 60 90 120 150 160 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 Inches MAX. 7.04 7.09 7.61 8.34 8.14 7.49 7.09 7.98 8.14 7.73 7.33 7.04 7.04 Inches IMIN. 14 57 4.61 5.30 6.44 5.83 5.14 4.86 5863 6.03 5.55 5,10 4.78 ý4.57 Inches Comments: Measured Thickness!: 0.67 theta of 330 deg with an axial po.sition of 8.881 Limited Scan? (YIN): 1 N 1 Anayzd b :-_7 Date: ,* - ".-Analyzed by: %J4 4* Date:
- 10K* I1AM Niabng t&
IV llbl"%- I of 2
4-c N-~ RAMATNIE AMIP I',;No 1ke33 P. file"fJ - - i ~ hl~:t7
; 145 1T 1----
.... S 1...
11.5 ..... .............
...................-------- --- . . ~r~ .......
.......... .. ... .... - ........ I ..... . ..... ........ .............
.. t -
-...... . -- ~- 1 -------..
.,,*',.125 .............. .. .....- -- .................................. . ..................
... .......... ... ....... ........... .......... . .. ... . .- * .. Uphill
.. A.. 1 ..
................... .......... ....... ... ..... Side 4 .............................. ..... -.......-.................
1 0 ... .... ... ......................... ........ 1095 .---............................. ............................... ................................. 8.0 ............................ ................ ..................... .... .... ............ ... ...... ......... .... ... ..... ....... .. .. .... .... .. .... .................... ........
'11 0 ............. ........ .............. .. .................... ...... ...... ......... .................
10.5 . ........... ................... .................................
. i ............ ............... ....,............. ...... ............ .................. ;...... ....... .. .. .... .... ................
8 ..................................... . . . .I 7.5 ...... .......-.-....... ...... ....... ........... . . ........... ...................... 7.0 ................................... ...................... 6.5 S......................... -- -- ------- ---------- . ...... .... .......... ........... ..... ........ ...... ...... .... ..... ................... ........ ........ .............. ................... ........... ...... 6.0 . 5.5 ............ 5.0 ................ 4.5 ......................... ..... ....... .............. ........... .............. 4.0 -------- ------------------------- .......... .............. ........................ ........... . ............ ................. ..................... ......... ...... ... ... .. ........ ....... -------- --- ....... 3.5 Y S
--- i ________ h t - L 3.0 2.5 _._........................ ........................... ....................
..... ...... f..............
I--- p-Downhill 2.0 'I\.
......... ( ....................
.. . .--- I .................. I... ....... ----- --- - ---..---- ----- - ..-.- I.-.---..-..-
.. . .......-.. .---------....... t7. ........ - ...........................
i-r I j- S ,o u .-. : 150 1o -'200. 259 -300 A0:U 0 350 400
-1 -- 2 -- 3
-5 -6 -4 8
-9 -7
-10 "--11 12
- 13 14 -15
-- =Noz. End m 16
--- 1
" -- Uphiil I Downhill demarcation 2: 2002 Noz 33 Chart 1 .2of 2 VV: 41,
rW Nu.: rW-iuu-, 04-rU-1uu-z, 3, 4 and 5 "A* Reactor Head Penetration PFRA*'- MC P . Ultrasonic Examination Data Sheet Customer: NJrM CI Plant: . &:,-.kUnit: Penetration No.: -- ]Procedure: 5'/- /SI- /oo-o Equipment: Description VH# ' Cal. Due Date SN# gT om oscan "" E T, i.A*' 16 Channel P/R N/A 1N 1A ACCUSONEX Data Acquisition Softwaie: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3-T. Cable Length:- -O TvDr- tPz- n-a !4 1 Calibration Block: (.0/o/1,30E& Calibration Setup: 4 ZZ 2.i14' Scan File No.: Initial Calibration File: A Ve low Final Calibration File: t.,J-r j , Fj-1. Scan Start: Z -. ,7' Scan Start: e= -- Scan Stop: Z = ".S-Scan Stop: e= .7Z.57 2 Index Increment: 30 Channel Angle Serial No.--:ý Comments I 50j.. :5oL-! Scr4* Results: ecordable Indications: Leak Path Detected cted Circumferential Flaws Detected Comments: Analyzed by: Level-! Date: ' 0-. Reviewed b:. Level: Date: lel/*9,-z.._ TYPICAL DATA SHEET ,4 ao9-c,, AZ-1-.2LS 17. 10. FIGURE 5 S- va -Ze-.
- i-. 3jt. ZL Page 31 of 32 17 14.* . 03
- f 5 q. 1.
-- . 7* '*
S A CRDM Nozzle Ultrasonic Examination Data Sheet F R-A M Ar~PA~r-a Mt Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - - Nozzle: . 33 Procedure: 54-ISI-100-09 INozzle Dimensions: Oin.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deig.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch t S0439CN Ch 6 n/a I @ I IdoS1 Setup: I-;-. Ch2 n/a Ch7 n/a Cic cn Sat - e h n/a ChS n/a Cir_. Scan Sjart:l jdeg @1 -0.7 I" Stop:I -365 jdeg @1 856i" Setup:[3 Ch4 n/a Ch9 n/a Files: A2272_15.10 021_15.16.06/_15.2828/_15.34 26, Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (ID/OD) Flaw TIp (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI *.m il i S2 ' 3 4 6 7 ; 8 9 10 11 12 13
...14 15 16 17
~~~~ 0 Data 5Loc. 30 160 ~
90 ~ 120 150 180 0____ 9___
. 210 1240 270 1300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 1240 270 300 1330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 10.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. Inches MIN. Inches Comments: Measured Thickness: 0 624 thet of 126 deal with an a-'a poiino 6 Lmited Scan? (YIN): y*l~
Limited scan as follows: 0 to 5 deg /199 to 118 degj / 134 to 360 degl / total limitation 254 degl. Axtal limitation is located between nozzle end and weld toe. 3 %coverage The downhill side of the weld was located in the limitation region. 4Date: Analyzed by: 9 /*. I 7 - Analyzed by: o4 1,4 Date: 9/29/028:33 PM Noz 33 Page I of 2
'A ARf.7lVt l.
CRDM Nozzle Ultrasonic Examination Limitation Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 33 Procedure: 54-1S1-100-09 Nozzle Dimensions: (1n.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.): 0 End of Noz. (In.): 0.17 Probe Serial No.s: Ch I Ch n/a Y`4
.F%14. N N~____ Ch 2Sn/a nla Ch Ch77 n/a
~~.i'iiR Ch 3 Cire. Scan Start: ._Jdeg @1L_ " Stop:l!35.,//Ideg @1 [ " Setup:1 3 Ch4 n/a Ch n/a Files: A.Lzz. o315. lt.-
1.i0.3o /M*.ZY.**' I.*/ dji.Cal Block SIN: 60119300 Ch 5 nla Ch 10 nla Acquisition Instructiohs:
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred. For example, current limit activatd, probe stalled on upward stroke, rotational stall occurred.
1 -5+.vVC=b -A,V £-JO-MN Ate~ ,*,eA1" 7t, -, vHT " Aýýa -yir4,jf "iTPJ de'rTjecv.;- ud Q. ,*-" 2 ="-RH r- /-MeWn A)07 /IILG- '-,Q &5 5CNVer) 7--73 "4 -AA) 10off - //9" ,-W Tkle-SC CflA5 4 5 67 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Acquired By: *a *..*h * ..* B* "*. "[* Date: o Z-9129/0212.21 PM Limitation Sheet Page 1 of 2
ko1L47AJ FRAMATO ME-ANP N'ONDESTRUCTIVE EXAMfNATION~ PRoc.=rlp*= Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-41S-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A'Reactor Head Penetration
,FMAATIOMAIUL Ultrasonic Examination Data Sheet Customer: "MJrC Plant: Po, Bew-A I Unit:
Penetration No.: 3q Procedure: 6-q-/Is/-6-aOf Equipment: Description VH# Cal. Due Date SN# LLTomoscan -/7o -2L1 7" 3 ;Zo31: 16 Channel P/R ,,, /N ACCUSONEX` Data Acquisition Software: Version 6.2.5 ACCUSONEX" Data Analysis Software: Version.-%315"* 3. 1 Cable Length: 5 o0 Type: lZ.,- A # lntermedi~te Connectors: I Calibration Block: (.// 3VD0/ Calibration Setup: 3" Scan File No.: Initial Calibration File: A ZZ(,.Z- 0. Z6. 30 A2 z &'.5-//. o(.-30 Final Calibration File: A -L.r. 6s'.)1.7 Scan Start: Z =o.. c-/ Scan Start: 6 = 0.O Scan Stop: Z = I/5"j Scan Stop: 8= 3*5 Index Increment: 30 I Channel I Angle I Serial No. Comments I Cm nts w 1 J 1L --2 , 0 -
->/
1 7- 1 30,11- 1 352.oz I -r D 3 & 0"-1-357 5" (.,f 3 o5.7 Results: ('No Recordable Indications Leak Path Detected Axial Faws Detec eCircumferential Flaws Detected Comments:
-7Ai "v AW ~-'/
M.11-r 00;-W~
- 4. POAaA,% - "
Analyzed by: Level: Date: /0/3/ -z IReviewed by: 4ý2 . el*2 Level: 2ZYý Date: /// 0 -z-TYPICAL DATA SHEET FIGURE 5 vA0;0 I~V Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Ilafa 5Rh*A Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 34 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 118 End of Noz. (in.): 4.06 Probe Serial No.'s: Chli i tti". 4i* de _ _, tujI *.* *, Ch 2 35044 35202 Ch 6 Ch7 35052 n/a
.. .. ,., .~. . . , Cb 3 35070 ChB n/a Circ. Scan Start:I -51deg @1 0.47 " Stop:I 365 Ideg @1 15.141' Setup: 1 Ch4 35044 Ch9 n/a Files: A2265_11.06.30 Cal Block SIN: 60119300 Ch5 35052
- Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (In.) Ratio Orientation Min Max I NRI 2
3 4 5 6 7
- 8--_ _ _
9 10 , 11 12 13 14 15 17 Data Loc. 118 148 178 208 238 268 298 328 358 28 58 88 118 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 MAX. 7.36 7.66 8.29 9.26 10.24 4.06 Inches 10.00 10.31 10.54 11.00 941 8.37 7.66 7.36 Inches MIN. 5.00 5.11 5.45 6.68 8.55 8.25 8.52 8 89 9.45 7.09 5.71 526 5.00 Inches Comments: Measured Thickness: 0.65 A thetaof 112 deg with an axial position of 1481 Limited Scan? (YIN): n
- Need To review the fabrication drawings for repair areas. Locations above compound weld area has rectangular dropout. Possible remant from repair region S/', Date: 3o _ no Analyzed by: Date:
iPm 4 1 of 2
6k.
- I FRAMATO'E ANP Nozzi6 34 Profile (rescan):. - F,'
* - -- .7.
15.0 - r
+/- F
'2
- r 14.5 . ..---------
.. .. -------------------. ------------------- ------------------ 1/4F 14.0. r-------------"....
r ....
------------------- ------------------ 4---2............. --------- ; .... ..*. - F 13.5 7 -------------------; -------------------. ------------------ ------------------
13.0' ------- --- --- -- -------------------. ------------------- ------------------ J---: . . . . . . -----
' I...
F 7 jF k' 12.5 12.0 --------------------- 11.5 r------------------- t-------------------
-- 2J_:...
<g5X Uphilit
,SIdb-g.
-. F FF 11.0 -- -- ------------------
10.5 ------------------ -- 10.0 ------------------ ----- 9.5 ---------- 9.0 -- ------- -- -------------------- 8.5
...... t ----
7--- j ~~n S........... PWJP.~flF~~fAFJIFm-i~Fi I ...... FIFVF~PMNij.i~iII
------------------ ýk rtFnJFJe~JJF
--- I FFJ I
I I'!"! 8.0 ------------------ ----- -- -------------- ------------------- ---------------- ------------------- -- ------------- e- 7.5 ------------------ --------- %r - ----- ............ 7.0 ------------------ ------------------ ------------------ ------- ----------- ------------------- 6.5 ------------------ 6.0 ------------------ ---------- -------- I------------------ ------------------ ------------------ ---------------- - ------------------- 5.5 ------------------- ------------------- -------------------- ------------------ --------------- 5.0 ------------------- ------------------- ------------------ ------------------- ------------------ 4.5 -------------------- -------------------- ------------------- ------------ ------ 4.0 - 1 1 1 3.5 ------------------ ------------------ ------------------ ------------- 3.0 --------- I---------ý:- ----------- I------- ------------------- 7' 2.5 ------------------------- -------------------- ------------------ --------------------- Downhill 2.0 ------- 7------------: -------------------- ------------------- *. --------- .
- -7
-, " f Side, 7--------
1.5 --- ------ ----------- ---- - - - - - ---- --------- -.-
--... ------------ i ----- - - -- - - - -- -- -
1.0 --------------------- ------------------ ------------------ : ------ ------
---------- . "-------- --- .. . .. . ... ----- 7, 0.5 --------- ................... ._ , ---------- 77, 0.0'
-0 50*~~
3/40:- .150,"., 200'
'250 "300." > 356 Dogrees
-2 --- 3 -4
-m 5 -6 7 -8
, 9 -- 10 -- 11 --- S.1.1612
- 13 - 14 15
'-- Noz. End . .,*ta I "'= Uphill I Downhill demarcation A
2:02 PM9/22/02 Nozzle 34 rescan Chart 1 Page 2 of 2
i I I AOY*LA7ýV FRAMATOME-ANP Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-iSI-100-09, PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5
.A Reactor Head Penetration MZU4AO-M:. AMP Ultrasonic Examination Data Sheet Customer: /,mc Plant: Fou,,., BS a Unit: I Penetration No.: _p , Procedure: gel- /S/- /00- -Of Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan fz- - 7 o.3 Ao313 16 Channel PIR N 1A ACCUSONFX'm Data Acquisition Software: Version,6.2.5
.CCUSONEX "Data Analysis Software: Version 3-_5- ?- , 6" Cable Length: 5O1 Type: f(.,- 1+A # lntermediate Connectors: I Calibration Block: 6o//93DO/ Calibration Setup:
Scan File No.: 4'24 ooS/-*2? Initial Calibration File:2z.,_.zs'.? 4 ;2Z6 ' /. o.' Final Calibration File: A .- t. -_os-. if.77 Scan Start: Z = ! 97> Scan Start: 0= -- Scan Stop: Z = l.Y' " Scan Stop: = .. J' Index Increment: 30 Chanipel Anqle Serial No. Comments
.3 C>'1.- "5 z5o z - FL>-
3 &Os 3-50?o 005 3So5 2 Results: QNqo Recordable Indications Leak Path Detected / Axial Flaws Detected Circumferential Flaws Detected Comments: , _ ,- , , , , I; 1 g.r" 6'TYPICAL DATA SHEET FIGURE 5 )ýA Page 31 of 32
A UJdLd *,.IIUCI. Customer: Nuclear Management Corporation
*,*r -
Plant:
-*.,II*i..I
* .t, .lg Il U'*l' Point Beach*
.oc-A lIEIIIIaLIUJII Unit: 1 Nozzle: 35 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: - 0.625 Downhill Side of Nozzle (deg.): 196 End of Noz. (in.): 3.94 Ch 1 35044 Ch 6 35052 AxiSanla I ' Ideg deg. ,:, I;, Sto:., . Cet 3520 h7 na!1, SCh3 35070 Ch7 n/a Circ. Scan Start:[ - deg @1 47 Stop:I 365 Ideg @1 19' Setup:l 1 Ch4 35044 Ch9 n/a Files: A2266_00.48.29/A2266_01.31.03 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (In.) (deg.)
.. (in.) Ratio Orientation Min Max I NRI 3
5 4 5 6 7 8 9 10 12 13 14 15 16 17 Data Loc. 196 226 256 286 316 346 16 46 76 106 136 166 196 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 Inches MAX. 7.35 7.64 809 9.00 10 02 1071 1097 10.93 1023 933 8.42 7.72 7.35 MIN. 4.97 5.13 575 Inches 6.76 8.10 8.96 933 9.12 8.50 7.19 583 5.22 4.97 Inches Comments: Measured Thickness: 063 @theta of 105 deg with an axial position of 11.481 Limited Scan? (Y/N): N Analyzed by: , Date: 9-- 720 - Analyzed by: AJ /4 Date: 9/23/029,33 AM 9/2/02.33AMNozzle 35 Page I of 2 Page 1of 2-
Z Jo Z a6ed I, Mo43 SE IlZZON WO/f2IGV'V WS6 uoieoJewep Il!qUM*OG / ll!qdnflunn,.i pUBJ'ZONfJ.... K. - VV 9- 6-
-LI' I ---- 9 I 1
- - -- - - --- ------------' - -- - - " 9 0 VV-VpFV,V :'4t
- -- &;;...,.7...o] ..
... ,- ; .- . . .-4V.s .. .. .. os_.!
.... - .- -. ..- .- .-- . . .. .- . - . - . ---- .. . . . . -.. OSL, -.- --. ------ - - - ---- -." .....
0"p
---------- V----- -- ------------------
Il V' VVOV ----------- V --------- ------ *V*
--------------------------------------- ----------------------- 7-----
0"9' jot OTA V------------
... ... ... ........... ..... ........ ........- O'-/I.
V 9-. VVVtV V VV 4
*V.'VVV2V.'VV\.VJV 3*
i:.: opi *e
' *, . VV . ..Vt- "V.. . .. .. . .. 0" V:V,, , " VVV; V.".-V'V: V .V V. V '°
- dNV3V~~~IOVVM Vt 2.tt A.'
(
kOIZVIV7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE
)Remote Ultrasonic Examination Of Reactor H-ead Penetrations I PROCEDURE NO.: 54-IS1-1oo-09o PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
.*Reactor Head Penetration F=*A*,vIATO?.'!AMP Ultrasonic Examination Data Sheet Customer: NMC Plant: Po,,,,,,A Ie..,
Unit: Penetration No.: 3(0 Procedure: 6yqj'.-1,-4i-O90 Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -/z.7 o .,o3 16 Channel P/R A-'M ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX mData Analysis Software: Versioný S-3. Cable Length: 5So Type: R.,- 3-ý # Intermediate Connectors: I Calibration Block: "6opil3D0/ Calibration Setup: 4Z*;-,Z,. g. Scan File No.: Initial Calibration File: A g
,4 7 (z* ".2 *5- 5 Final Calibration File: AnZs% 6 - oi-.. .37 Scan Start: Z = 0 .'q7 Scan Start: 0 = -5 Scan Stop: Z = I' Scan Stop: 8 St,7 Index Increment: 30 Chanr*! IAngle Serial No. Comments Z "1-1 -. 5 .o 2. -oF= D 3
,q
- &Os vz.I'g-35oO s so qt To dOse 3oC', .
Results: No Ecordable Indications Leak Path Detected I. Ax-mae Flaws Detected Circumferential Flaws Detected Comments: Analyzed-by: Level: Date: 9 ZZ'6, Reviewed by: .Level: 4iL Date: 16/K _ I,/ - I-.- - TYPICAL DATA SHEET FIGURE 5 jP *,- 23-l-- Page 31 of 32
0 FRAMATOM Customer: nmý ANI= Nuclear Management Corporation C....N... l. *UltrUnn V F~mglln, el I *i Plant: Point Beach fUluL Unit: 1 Nozzle: 36 Procedure: 54-ISI-100-09 INozzle Dimensions: (fh.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dedj.): 350 End of Noz. (in.): 3.9 Probe Serial No.'s: Ch i 35044 Ch6 35052 Axial Sc~anL., t" .. ,= , __-_,___- _d_____:-top. . _Setup: Ch2 35202 Ch7 n Files. , " - ' . .. *" -" -' ., ' - , Ch Circ. Scan Start: ..-5Jdeg @ 0.47
,9" Stop:I 365 Ideg @1
- Ch3 35070 Ch8 n/a 1s[ Setup:[- 1 Ch4 35044 Ch9 n/a Files: - A226517.52.55 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 2
-3 4 -5 -6 -713 __,_ ____._ ___,\ - .. _ _ _ __ _ _ _ _ ,__
8 9 10 11 12 13 14 15 16 17 Data Loc. 350 20 50 80 110 140 170 200 230 260 290 320 350 Degrees WELD No. oc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3 90 3.90 3.90 3.90 3.90 Inches MAX. 6.74 892 892 9.41 1000 1037 10.44 1013 916 8.13 7.27 6.70 MIN. 6.74 inches 4.45 7.09 7.12 7.71 8.35 883 8 83 840 7.38 6.13 5.11 4 56 4.45 Comments: Measured Thickness:I inches 0 63 @ theta of 93 deg with an axial position of 10 3 Limited Scan? (YIN): n I Analyzed by: Date: 717- 7o, Analyzed by: Al/A Date: C-, i 9/22/027:58 PM Nozzle 36 Page I of 2
AW,
+: . t+-' .4141 3/4:- it- -' '3-6 P~ ro Id '
FRAMATOME ANIP , .- , -' I 105' 14.5w
+;..*.':..: .:_% ,. .*........... ...................
14.0, 13.5 13.0 12.5 ------------------
-------- 4--- ---- L .......... .
12.0, --- - -- - -4 -- - - - -- - - [EE t,1,11 ,-
------------------ -,. ................... ......... I -----
11.5 11.0 10.5 46 h' .S - 10.0 ......-.- -------------------- 9.5 --------------------- ---------------
------------- L-----
9.0 .............. --- ----------- 8.5 ---------- ---um oat" UVIMA Q SUM
' 8.0 ------- ------------- ----------------- -- - - - - - - -- - - -- - - - - - - - - -- - - - - - - - - -- - - - - - -- - - - - - - - - -- - - -- - - - - -- -- - - - - - - -- -- - - - - - - - - - - - - -- - - - - - - -
7.5 - -- - - - - -- - - - - - - - -- - ---------- ------ ------------------- ------------------- ------------- -- - - - -- - - - - -- - - -- - - - - - --- - - - - - - - - - - - - - -- - - - - - - 7.0 .. ......... ................. H --------- ------------------- ------------------- ------------------- ------------ 6.5 --------- ------------------------------ ------------------- ------------------- ------------------- --- -------------------------------------- 6.0 ------- --------------------------------- ------------------- ------------------- ------------------- -------- --------- ----------------------- 5.5 ----- ----------------------------------- ------------------- ------------------- ------------------- -------------- --- ------------------- -- 5.0 --- 4.5 4.0
- ..:--,-7 j-----------
L 3.5 -. --I - - - - - - - 3.0 --------------
-- --- L----
4- 'Downhill 2.5 ------------------ -------------
-c Slde-
.......... 1
.1 2.0 S --------
K-..' . .*+.. . -'.'
------------------- -- ---- -- -- - tV' ,
"4.',5 7 -o
-- ---- - ' ----.-- '-1,
*'. '1...+_. . ,,.' .
* - -u%
'4 -?0,. --------- I-- TOO " ., 4 0 0 ' .'. 4,. 4 4 eJ i' 4 - .. ' 4 ~t
-,' ,+1:
14
!--- .5 -6
-3 7
"9 10 11
'13 -...- 14 15 m-f-""Uphill / Downhill demarcation Noz. End 1
11:15 AM9/29/02 Nozzle 36 Chart 1 Page 2 of 2
I P0,11AAN? FRAMATOME.ANP NONDESTRUCTiVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations NO PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 4 Reactor Head Penetration FP4kUA-T E ANP Ultrasonic Exarfiination Data Sheet Customer: Ntwc Plant: Pwvr, B..A 1 Unit: I Penetration No.: Procedure: </2/-/ .- 9 Equipment: Description VH# Cal. Due Date SN# gTomoscan $vI -z7o3 16 ChannelP/R 1 0A i -s/A "/A ACCUSONEX" Data Acquisition Software: Version Q.2.5 ACCUSONEX'm Data Analysis Software: Version .3q-0 (9 . Cable Length: 560 Type: lZG +A # Intermediate Connectors: I Calibration Block: 4NI/I3DO/ Calibration Setup: 1Scan File No.: Azz&.- . Initial Calibration File: q}ZZ,,z- /b.;S.3O Final Calibration File: A- 2-zX6-o.-s' ). .7 Scan Start: Z= 0q.wl"Scan Start: e=-I5 Scan Stop: Z I'V"Scan Stop: a 3(. r Index Increment: 30 ChanrnI Angle Serial No. Comments 1 6" /. Z 3*O0I- 135z2oZ TOFD 3 &-SO -35 o70
" .d5*- 3 orz 50 52.
36 Results: -Ilo Recordable Indications, Leak Path Detected
-- ial Flaws Detected Circumferential Flaws Detected "Comments:
Analyzed by: evel: Date: 9 LZ
-Reviewed by 4- Levelr' -- / Date: 6'/~~
TYPICAL DATA SHEET (k 6 ,,1-3b. v FIGURE 5 PFage 31 of 32
-'I A
Customer: Nuclear Management Corporation ..... S. flMI .. l ssa. Plant: Point Beach c .u L..AcIIEEI
-U EULIUII
".-a. U" L LJOLO Unit: 1
.JiiL Nozzle: 37 Procedure: 54-ISI-100-09 INozzle Dimensions: (4n.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (degl.): 0 End of Noz. (in.): 3.83 Probe Serial No.s: Ch 1 35044 Ch 6 35052 Axial Scan' -.Start:l. deg..l@Its, -. , - Ideg, @[ " , ',Setup:lL Ch27 h n/a Flies:' . . . . .- ,. , -h . .... ch3 35070 Ch B n/a Circ. Scan Start: =J5deg @ 0.47 " Stop:I 365 Ideg @I "9. Setup:[ I Ch4 35044 Ch9 n/a Files: A226514.03.14 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 nl/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 2
3 4 6
-7 9
10 11 12 13 14
'15 16 17 Data Loc. 0 30 60 90 120 150 180 210 240 270- '300 330 360 Degrees WELD Noz, Loc. 0 30 60 90 120 150) 180 2:10 240 270 300 330 360 Degrees PROFILE Noz. End 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.93 3.83 Inches MAX. 7.60 9.35 9 54 9.73 10 21 10 54 11.11 11.00 10.64 9 74 8.78 8.02 7.60 inches MIN. 5.41 7.12 7.17 7.69 8 07 8.55 19.35 9 35 8.74 7.60 1646 5 89 H .41 lInches Comments: Measured Thickness:; 0 63 @ thet of 1 2121 deg!with an axial position of 13 28 Limited S'can__(Y/N): n I.Analyzed by: r--"Date: t? /ZZ../a.Z Analyzed by: ,j,, Date:
6' 9/221024 08 PM Nozzle 37 Page I of 2
V'.' Nozzle 37 Pir'ofile ~ FRAMA-TOMrE ANP Il 14.5 ---.- ------'--- _;_ --... 14.0 -----........... I t 13.5 ------- -------. .. 1---- ---------- ---------.... ------------------ 13.0 ----- - - - ---- -- -- - - - -. ------------------ ------------------ ------------------ ---------------- U hill c,' 12.5 - ------------------..
------------------ ------------------ Side',
iiiiiiiiiiiIiiii 12.0 -- 11.0 -------------------- ii 11.5 -- -- - - - - -- - - - -- - - - - -. -------------------
--------------- W--
- W..................
10.5 ------- ------ ------- ------------------ --- 10.0 ------ ---------- I'll ----- -------- 9.5 ~ 9.0
.ma"MIUM11"lmMUMmo
----- ---------- ---------------- ------------------ZZI ----
4~C~~4 - S........................
.u4mL,~4j4~u. b,.4.i
.,'~..,.,..
......... *lqq*qq*U*
U N*]iEIN*UmmU*M* WOMOMMUqý U] Im 8.5 --------- W-- ------------------ --------------- ------------------ ------- - -- U- .. ------------------ . 8.0 -- --------------- ------------------ -L ------------------ ------------------ U 7.5 ------------------- ---------- ----- ------------------ ------------------ ------------------ Ný- ----------- 7.0 ---------- ------- -------- --------- ------------------ ------------------ ------------------ -------- -------- ------------------- 6.5 ----- ------------------ ------------------ ------------------ ------------------ ------------- ---- 6.0 ----------------- ------------------ ------------------ ------------------- ------------------ ------------------ :ýý 5.5 -------------------- ----- w------------- ------------------- ------------------- ------------------ ------------------ 5.0 ------------------- ------------------- 4.5 - -------------------- r------------------- t------------------- 4------------------- ------------------- 4.0 -------------------- ----------------------- -------- w------- --------------- -------- - - --------------------------- ---- - --- *1---
- 3.5 ...................................... ---... - ------------...
3.0 -- - - - - - - - -- - - - - - - - - --- - 2.5 ------- ----------------- Downhill 2.0 -- - ----------- - -------------- ------------------ Side 1.5 -----
..---.-.. . --------------- ------------- W 1.0 - ---- -- :- .. ---- ---.. ------.
.. ----- ----------- --.. -------- ------ t. '4 ,'
0.5 ------------- -- ---------------- ---------- --------- -------------------- 2- -. 0.0 . f -t
, 00 . . ... ,~, 0 . . . , " 100 150 200 250,'-- 300-Degrees
-2
*7
-4
-6 -8
-9 -10 U- 11 --
-13 14 15 S..1612
- -Noz. End .,saa.a1 """"l H " Uphill Downhill demarcation 4:08 PM9/22/02 Nozzle 37 Chart 1 Page 2 of 2
c'gC FRAMATOME-ANP riut-'ItuLIvJ u.XzAMI TUrN PRUOEDUURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-1So-I 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration rR.4Aut= mAAmP Ultrasonic Examination Data Sheet Customer: W MY*C Plant: )e,.k
-,e Unit:
Penetration No.: ?g Procedure: 5/- is,-./oO-i Equipment: Description VH# Cal. Due Date SN#
.Tomoscan &/*./o3 qo14q 16 Channel P/R N /A NI,AA ACCUSONEX"" Data Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version .
Cable Length: Go' Type: /.- ;,-q # Intermediate Connectors: I Calibration Block: (.o/J13oe/ Calibration Setup:
'Scan File No.: 7:,; 7, *7i ,- . Initial Calibration File:4,'2C&_/I. 2 *. 99 Final Calibration File: c o,..riwivCt prrz-mHA Scan Start: Z = - " Scan Start: 0= -s- Scan Stop: Z = S*.5 Scan Stop: 0 =..° Index Increment: 30 ChannlI An le Serial No. Comments Results: <o-Recnrrfnhl. Indi pn~ss Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
MAnnalyzed by: * .... __Level: 72ý Date: *. ,'-*-. ,Reviewed by: Leve TYPICAL DATA SHEET b FIGURE 5 Page 31 of 32
Ack CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 38 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 36 End of Noz. (in.): 0.43 Probe Serial No~s: Ch I S0420CN Ch 6 nla Scanl.. ~~.. Axial S.... ,.
;t,ý Start:I-,, ',d .,. I.sop; ,."Ideg @ '%...t" Setup: I Ch2 n/a Ch7 -n/a
~ . \ : ~~ u.. ~ .. ~Ch3 n/a C8n/
Circ. Scan Start: deg @L-5 -07 " Stop:I 365 Ideg @1 5.98' Setup: 3 Ch4 n/a Ch9 n/a Files: __ deg_@___ ___ Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface10C to Min Min Max Max DM__ Nozzle_ TotalUltrasoni Min Max Examination Total Length DataShee Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI._ 2 3 4 5 6 7 8
-9 10 11 12 13 14 16 17Data Loc. 36 66 196 126 156 186 216 246 276 306 336 6 ,36 Degrees WED Noz, Loc. 0 30 60 90 120 ISO5 180 210 1240 270 300 330 360 Degrees PROFLD by:_______Noz. End Anlye 0.43 0.43 0.43 0.43 0.43 10.43 0.43 0,43 0,43 0.43 0.431 0.43 0.43 Inches POIE MAX. 3.12 3.15 3 29 3.44 3 68 3 82 3 87 3.84 3 71 3 47 3 26 13.18 3.12 Inches MItN. 1.81 1.93 2.06 2.31 2.47 2 .59 2.7'0 2.62 2.41 2.17 2 00 11.90 1.81 Inches Comments: Measured Thickness: 10.63 theta of 191 deglwith an axial position of 4. iited Scan? (YIN): N Analyzeby ,*"J* P Da te:T ,- -,70 2-.- Analyzed by: i- Date:
/ t4 01.2q.0-L Noz 38 P5age 1 of 2 9/24/028:34 AM
6C ZON Z0/IrZ;/61/NV 1V:8 Z 10 Z e6ed J 1e4O At 21 uoj1eoaewep IIJqumoQ / IIlqdn'l,,,,.,, PU3 "ZON m-,,.. '
'I L OL 6 cL 9- 9-
I 9m
,' 4 O *,,
'44
* .1/4 ',.V /~ "4 - 4 .4 , C'::,
.. . .. ", .r,' .
,09o OS0l,,.
og', - . ,, ,00 4-: 40"0
- i I
I 4-1t 0---- m----- - -..
-' GLZZ ,,;- - '
OI ;......:....
'-'- - '--'7 - '" t. ... . 0
.................. ----------------- . .,. o ........ ---.. .. .-- .. S' ............... .
[---- ............ i ..... ... *.o eplS , ..4.............. IlII4UMOQ
- ----------- "a"D iI*
habili*iidilddl* lililBii*ilililllDg tlllBOiH 7------- ----- ----_--,
,"No2D4l14n4i~4~~p44l4l~~~fl4fUf~l Inmmwm AIM mn~ummimownrnIlm n 11 lwlwýwum
--- -.-- z ---------- .................. ---------------
----------------- I I-I
----------------- .................. -----7:77 ý-7. ---------- - -. .-. I.. . -.-----------. . ---. ---------------0".
----------------- ---------- S...... ..................................... a's'
----------------- .-................. I
---------- S......
. 0"9 9'9 S6T
.................. S..................I i-.................
*------------------------------- oloi 0'9
- - 9 '9 S..................
---------- ....... , ................. ................... 0'6
----------------- S..................'
i..................
---------- S....... ................. ...................
. . .. .. . . . . . . . . . .. . .. . .. -6
'61.
---------- I------
------------------ ----------- 4.......................................... O'44 T.k I-.................
...........S.. . . . . . . ........... w -- - --
- ---6~
. .'to*59
............. ........... .. . . . . . ........... w0"0/--- ................ - --- -- ,
- -4~4- .. : .......... ----------
------------ .......... . . . .. ..~~~-i .. . v.. .. . .. ..... ,... . . '/ /
f : -; --it
------------ .......... --- -------------- -- --- 'k
"----------4
- 4. 444
.4'$444 44j 0"444,
!elIUOJd 61: GlZZO'NO
"A..
Ji 4 9* - Nozzle 38 Profile FRAMATOMEANP , 15.0" 1...... .. .. - ..- . .. . : --'. ".*9 / ,99 *"
"14.5- ......-- ----------------- --------- ------ ---------------- .....................
14.0 -- - .....
---- -- ---------- ------ *i.................. -i 13.5 ----------- ---- ; .
....... --------- ------ S.................... _. 1,,
13.0 ----------------------------- L..... ......... ........ *i.................................... 4.................. ---------- S Ide 1 2.5 ------------------------------------- ..-----... -------- .i................. 12.0 11.5 ----------------- ---------------- ---------------- ----------------- - 11.0 ----------------- ----------------- ---------------- ----------------- I ---------------- ----------------- ----------------- 10.5 ----------------- ---------------- ----------------- ----------------- ---------------- ----------------- ------------------ ----------------- 10.0 ----------------- ---------------- ----------------- ------------------ ----------------- 9.5 ----------------- ---------------- A--------------- ----------------- 9.0 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- 8.5 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- ---------------- 8.0 ------------------ ----------------- ----------------- ----------------- ------------------ ------------------ ---------------- :. ----------------- 7.5 ----------- L--------- I -
----- - --------- ----------. j------J-----I -----.- I------------------ I ------------------
7.0 ---------------- -----------1& ---- ---------------- --. p °-- ............... 6.5 ---------------- ---------------- ------------------. 6.0 ---------------- ---------------- .
------------------ ----------------- r------------------.
5.5 ---------------- ---------------- - - - --- - -- - --- -- --.. .---....... .......--- 5.0 ----------------- --------------- -----------------. 4.5 ----------------- ----------------- ------------------ 4.0 .......... ...... 7 3.5 3.0 ----------------- ----------------- -----------------
---------------- ----------------- ------------------ ------------------ Downhill 2.5 ----- I------------- -------. . : .- . . Side-,
2.0 ------------- ----------------- ---------------- ----------------- ----------------- -- 9 1.5 ...............I 7------- ----------------- ------------------ 9- --- --- -- 7 ------- 1.0 - - ----------- ----------------- -----------------
- . . . * .. .- S............ kl=ki*...*..-;.
-------- -d-do-0.0'. "~ .. .. .~ .
0' 50o *1 I1 2007> 250'
*7 4
-6 -8
-10 -*-11 -12 9 9- 15 ---- 16
-13 - *14
"--'-Uphill / Downhill demarcation Noz. End I
Noz 38 Chart 1 Page 2 of 2 8:34 AM9/24/02
CiC FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCF=tURE* I3LA. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-IS11I 00-09 PQ NO.: PQ-100-1, 54-PQ-1 00-2, 3, 4 and 5 A Reactor Head Penetration rFMAT'rOMZ-AMP Ultrasonic Examination Data Sheet Customer: W] MAC- Plant:- 5e-.k,c'/-' Unit: Penetration No.: y9 Procedure: 5'1-i1s- o0-'O Equipment: Description VH# Cal. Due Date SN#
.Tomloscan' "" 1 ,J/.-L 3 2.Ozgq 16 Channel P/R N/A r/. "]1A ACCUSONEX'm Data Acquisitidn Software: Version 6.2.5 ACCUSONEXm Data Analysis Software: Version 3 -7.V a" Cable Length: Got Type: *&.- t4-q-T # Infermediate Connectors: i Calibration Block: 6,,o/q3o0/ Calibration Setup: "Scan File No.:$,R?,,<7- o5 . -.T/7 Initial Calibration File: .22 ,/4,'4511111 Final Calibration File:e,,Aj-T*JUc-b 16-1b4 _
Scan Start: Z = -. - Scan Start: 0= -S Scan Stop: Z = 5, -"Scan Stop: 0 = 6X Index Increment: 30 Channel Angle Serial No. Comments I 5O Results: No Recordable Indications 2 Leak Path Detected /. Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: Date: ,9-, ,7-. Reviewed by: Level: Date: ,- . TYPICAL DATA SHEET FIGURE 5 0ý (i ti Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet ICustomer: Nuclear Management Corporation Plant: Point Beach, Unit: 1 Nozzle: 39 Procedure: 54-1S1-100-09, Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.4 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a Axial Scan t c;MSr.deg- I*'*.Stop:- T..: Idei.' ,,"
-etup:L,.a. Ch2 nli Ch7 n/a es~~~"~ ;', ~* Ch3 n/a Ch8 n/a Circ. Scan Start: L___ -j5deg @L-07 " Stop:1 365 Ideg @1 591' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_03.27.51 Cal Block SIN: 60119300 ChS n/a ChlO n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 12 T NRI 3
4 6 7 8 9 12 113 14 16 17 .... Data Loc. 0 30 60 90 120 150 ... 180 210 240 270 300 330 360 Deg ree.. . 0 30 60 90 120 1150 180 210 1240 270 300 330 360 Degrees WELD Nloz. Loc. POIE Noz. End 0.40 0.40 10.40 0.40 0.40 0.40 0.40 0.40 10.40 0.40 0.40 0.40 0.40 inches POIE MAX. 3.14 3.14 3.29 3.49 32.84 67 3.79 3864 3.76 2.94 32.79 63 32.58 43 3.32 3.18 2.39 "'2.27 3.14 2.24 inches Inches MIN. _ 22_4 2.34 2.51 2 69 3.02 2.99 Comments: Measured Thickness: 0.65 @ theta of 143 dogwith an axial positiono Limited Scan? (YIN): N Analyzed by: Dat:_. A b FJ A- Date: P_- - 7- A b Il W Oc.tY- oZ..-? Page 1 of 2 9/24/028 35 AM Noz 39
r... FRAMATOME-ANP NONDESTRUCTIVE FXAMINATInNI p~nflr*!flhIp Remote Ultrasonic Examination Of Reactor Head Penetrations NONDSTRCTIV EXMINAIONPROCDUR I PROCEDURE NO.: 54-iSI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1kReactor Head Penetration P=A-UAT A, M*,tP Ultrasonic Examination Data Sheet Customer: W MC, Plant: At I3eqc..- Unit: Penetration No.: if 0 Procedure: 5L1- Isi- 1o0 Equipment: Description VH# Cal. Due Date SN# gTomoscan "/ozzq 16 Channel P/R N/A N1 I 1 ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version g 7. I' a7" Cable Length: S CI Type: lZe- t4rq # Intermediate Connectors: Calibration Block: *6,o!/,/3o06/ Calibratiori Setup: Scan File No.:. . .. ;Y/.c'2. Initial Calibration File:jqi 2/ q.:Ug q Final Calibration File: c.,-mivE_ 'p ,". N 11.*. z Scan Start: Z = ,-.? Scan Start: 0 = -" Scan Stop: Z = S..'Scan Stop: 8 =3S' Index Increment: 30 Charmel Angle Serial No. Comments I 5"J. oq-2o Results: o Recordable mndic Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: 4,.,' f-,,, Level: Date: 9- ?_T-e7 Reviewed by: Level: Date: /Z. TYPICAL DATA SHEET ul - 0 r' . Z,1 "0 L." FIGURE 5 Page 31 of 32
A FRAMATOME ANMP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 40 Procedure: 54-ISI-100-09 INozzle Dimensions: (Kt.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.36 Probe Serial No.'s: Ch I S0420CN Ch nl/a Fig,-@ 0p de @It z- '--,',,Setup:I Ch2 n/a Ch7 n/a AxiaScak*nCh4,-St3rt:I , Id3o,-t@ ,, 'Stop.I ,*;. Ideg - ,-h3 n/a Ch8 n/a Circ. Scan Start:[I -_Jdeg@I -0.7 " Stop: 365 Ideg @1 5.98 - Setup: [3 Ch4 n/a Chg n/a Files: - A226704.31.02 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI -, _" 2 ' 3 4 5 6 7 8 9 10 12 13 14 Is 16 17Data Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 160 90 120 1501 180 210 1240 270 300 330 360 iDegrees PROFILE Noz. End 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.363 0.36 0.36 0.36 0.36 0.36 Inches MAX. 2.78 2.78 2.93 3.32 3 26 3 46 3.51 3.4"1 3.36 3 22 2.88 2.88 2.78 Inches MIN. 1.53 1.67 1.86 2.21 2 35 2 40 12.45 2.25 12.06 2.01 1.82 11.77 1.53 Inches Comments: Measured Thickness: 0.64 1@ theta of 357, deg with an axial position of ... 4.47 Limited Scan? (YINI: NI 1Analyzed by: ,",..**' . Date: * ,7- -. Analyzed by: t-.I -/* Date: 4 c4 00Y-2V-u-L 9/24/028:34 AM Noz 40 Page 1 of 2
- - 4 . -444* ,4....
4 4 4 *'4'44 F. .444 Nozzle 40 Profile '4
- . -. - 1/2,
" " FRA'ATO M rMANP 4, 44 44 ,4 4 .4 4 -- 4.
'15.0' 14.5.-------,""' - ------------------- 4.
14.:-------. ---------- -----
---------------- ---------------- --- I -------------
, 30_ . ...': -,........ ----- ----------- ---------------- I ------------------
13.5--------------------- ----I------------ I4 . I 4, 4 13.0----------------..... 12.5 -- --------- --------------- I - -----------------
~12.0:--- --------------- .......... ----------------- -----------------
11.5 - -------- ..... ------------------ ----------------- ----------------- ----------------- 11.0 ------------------ ---------------- 10.5 ....... : .......... ----------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- V.--------------- ----------------- ----------------- 10.0------------------ ---------------- ---------------- ----------------- ----------------- 9.5 ------------------ ----------------- ----------------- ----------------- ------------------ ý\ --------------- ------------------ ------------------ 8.5----------...... 8.0 1 .---------------- 7.5 ------------------- --------------- ---------------- ---------------- -----------------. ----------------- ---- --------------. 7.0 -----------------------------..... ---------------- ---------------- -- -- -- -- --
----------------- -- - - - -- - - I-- ----- .. ... ...
6.5 -----------------.--------------- ---------------- ---------------- ----------------- ------------------. 6.0 -----------------.--------------- ---------------- ----------------- -----------------.. 5.5 ------------------.--------------- ---------------- ----------------- ------------------ ... 5.0 ------------------- --------------- ----------------- ------------------. 4.5 ------------------.--------------- ---------------- -- ------- -- -------. 4.0 -------------------.-.-------------. ---------------- ------------------ 3.53.o ---- ---- ----- -- - ---------------- m hfnf-- --- n4tiuF4 M VM! L 4umIuiIl44muat.uIu.mNg4I4 23 . 444...... .......... 4.. . . -------------- 2.015 ------------------------------------.. Downhill
----------------- ----------------- . ----- Side, 2.0 .. -- ' ------
7 -------------- ------------------ ---------
- ------------- I--- ---------------- -. ---, --- -' .
- ------ S4-------------
- 1 .5 - -- - ---- ---- ---- --- -4 1 -4 .. -4 4 '4 4 1' .
.4' 4
1.0~~~~~~~4 100~ - 150 ~200 , 250 300'U 4,4 4
- ,, 4'
, S Klý ý*
44 4 14' .'-I'4.J." '444 4 -. 4 j.4,4
."'L4 "r*:. ,": '" 4' 4 4 '.4..*4 4.4 A
-2 3 -4
-8 Iz5 -6
-- 10 7
11 -12
-9 -- - - 15 -.---- 16
-113 14
~- =-- 1 "-"m-Uphill/ Downhill demarcation Noz End 1
Noz 40 Chart 1 Page 2 of 2 8:34 AM9/24/02
FRAMATOME.ANP Remote Ultrasonic Examination NONDESTRUCTIVE EXAMINATI1ON PROCEDURE Of Reactor Head Penetrations PROCEDURE NO.: 54.s-1S100 A Reactor Head Penetration PRUA'ar*A1AN- Ultrasonic Examination Data Sheet Customer: M`J rr l Plant: i, Unit: ' Penetration No.: L I Procedure: 59- is,-.,oO-o'i Equipment:
,Description VH# Cal. Due Date N#
gTomoscan n "/' sq 16 Channel P/R NA N/A ACCUSONEX' Data Acquisition Software: Version 6,.2.5 ACCUSONEX Data Analysis Software: Versior5- *."" Cable Length: Soo Tpe: i- -Tpe # Intermediate Connectors: I Calibration Block: *o/,jq3o,'/ I Calibration Setup:
"Scan File No.: f 2.2 _O . ' 7 Initial Calibration File: R*ee,_4. VC.qV Final Calibration File: c,,AnvvUD erA.r " *'.-- .
Scan Start: Index Z =7.7' Increment: 30 Scan Start: e 5 Scan Stop: Z s-~9? "Scan Stop: 0 =.5$D-' rV Channel Angle Serial No. Comments
/ 5O°*- 509 eCAJ Results: uReodble Indications Leak Path Detected Axial Flaws Detece I Circumferential Flaws Detected I5 Comments:
Analyzed 15v: Level: z Date: .. ~-,~ .Reviewed by: Level: "Date: YTTYPICAL DATA SHEET FIGURE 5 PFe 31 of 32
A F R AMATIM E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation . Plant: Point Beach Unit: 1 Nozzle: 41 Procedure: 54-ISI-100-09 Nozzle Dimensions: (ia.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 30 End of Noz. (In.): 0.47 Probe Serial No.s: Ch 1 S0420CN Ch 6 n/a I Axial Scan ,i" - Start:_LL,.L deg, @I 'I Stop ,J,"dei, ,Setup: '. Ch2 n/a Ch7 n/a
- ~
' ~ ' ' ~ . .. Ch3na Chna Circ. Scan Start: -51 deg @1 -0.7 " Stop:I 365 Ideg @1 598' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_05.39.37 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max i NRI 2
-3
-4
-5
-6
-7
-8 9
10 11 12 13 14 16 2~~ ___ C__ 11(_ 1 __. 17Data Loc. 30 so 90 120 150 ISO 210 240 270 300 330 1360 30 Degrees 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz, Loc. 0 30 60 0.47 0.47 0 47 0 47 0.47 n.47 0.47 0.47 0.47 Inches PROFILE Noz. End 0.47 0.47 0.47 0.47 2.99 13.18 13 62 3 66 13.66 13 66 3 61 3 47 3 42 13.38 3 28 2.99 2.99 inches MAX. 1.87 1 187 1 2 41 2.45 1 2 55 1 2.65 2 45 2.36 -2.16 1 2 02 1.98 1.78 1.87 Inches MIN. Comments: ' Measured Thickness:1 0 63 @ theta of 1 3581 degl with 'an axial position of 0 961 Limited Sa?(I)
. Date: 9P-2*.7 - Analyzed by: A/i/t Date:
Analy zed by:. /_=_* Noz 41 Page 1 of 2 9/24/028:34 AM
Z jo Z 96ed abed:eq L HJtl IZON ZO/tZ/6nV VC:8 uo1180jewep IIIIumolUO 1 ildfnnnnwu PU3ZO . 14 ___ 6-9 L 9 17-AC) ge ON OM 09 0.. 09z ooz 0M IA . 00I , C' 0 , A *. "A A
'I 910 0*L.
97
,,epums mI C
* , A l -u-uu~
-C - - - - - -- -- - -- - -I- - - - - - -m
- ur -u - - - - u- i u- -n - i w ~ n-uh~
- -n-um7ai - - - - - - ~
- -- ~
- -- ~~
- -- - -- ~ - -- d1 - ---- - -- - - -- ____ _. .. . .. . .. . .. . .
I-Al- ---- 0.5P 9*5
....I... ---
.... -------I---- ----------------- --------- --- ------------- I--- ----------I- ------------- I ----------- --- O' 9.9'
................. ----------------- ----------------- ---------------- ---------------- 0,9
-------------- :--. ---------------- ----------------- .................. ---------------- ---------------- 9.9
.................. ----------------- ----------------- ------------------ ------------------ ------------------ .... 1------------- ----------------- 0'L G9L 9's 0'6 9*6
----------------- ........ I-------- ----------------- -----------------
O*Zk GZt
---------------- 0 . ct
-- --- r - -- - -- -- - -
-- -- -- I-- -- -- - -- -- - -- -- - -- -- -I- -- -- - -- -- --- -- -- - -- -- -
OIS
............ ---------------- .c 9-f C;
I_________ - I_________ I _________. _________ I_________ I - J n-fl A VZI' A ,c -' EINV OV0.LVVC1VU: A' GIlUld. LP GIZZON
I R.,> -ýAA
/V?
FRAMATOME-ANP --8* NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 Reactor Head Penetration
*AMA'*tOE AtOP Ultrasonic Examination Rata Sheet Customer: hN1'c Plant: Po,,',,' Bt,,A Unit:
Penetration No.: Procedure: 6-q-Is/1 1,04--Of Equipment: Description VH# Cal. Due Date SN# gTomoscan 17 16 Channel P/R A- t4J/A 1A/ ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version *33
*3.*
Cable Length: 61o Type: 1Z(.-V-.z # Intermediate Connectors: I Calibration Block: 6o//I 3vE/ Calibration Setup:
'Scan File'No.: , -- . 3-I Initial Calibration File:
Final Calibration File: 1;z2-2 6-or. 11 .. 2 Scan Start: Z = 0. 141L Scan Start: 6 = .5 Scan Stop: Z = 1?. %Scan Stop: 8 = Index Increment: 31 Channel Angle Serial No. Comments I 6 . 35oqq Z 3o'- 35.zoz -oF D 3 &o"'s 35o00
&Cr5e- 3 60$7Z Results: < [--J cordable Indicati-ns Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed 6~y: -Z" Level: Date: / 2 Reviewed by: .--- .Level: z-i7 Date: /-27, L-01,'
ý-k &ný TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
7A
-10 At Customer:
,, -Nuclear
..... Management Corporation .. . Plant:
*. ,, v ~Point Beacho U1.tIIum I,..^nllllllLtlUII UdLdlnit:{)[~Le 1
Procedure: 54-ISI-100-09 Nozzle Dimensions: (ih.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 136 End of Noz. (in.): 3.74 Probe Serial Nos, Ch i 35044 Chi6 35052 Axial S " " Sh7 @ d " ettp: Eh 2 35202 nda Fillp:* ---- Ch3 35070 Ch8 n/a Circ. Scan Start: -5 deg @ 0.47 Stop: 365-deg @I 17.6
' Setup: I Ch 4 35044 Ch9 n/a "Files: A2265_13.02.53 _____________ Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Ad ted Circ. Extent Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Mm Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-21314 16 11 "17 -8 Data Loc.! 136 166 196 226 256 286 316 346 16 46 76 106 136 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Ders PROFILE Noz. End 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 Inches MAX. 6.79 7.00 7.31 7.74 8.19 8 48 8.51 852 8 24 7.67 7.19 6.92 6.79 Inches MIN. 5.28 5 48 5 81 6 25 6.90 7.29 7.36 7.35 6.73 6.16 5 82 5.48 5 28 ;Inches omet:Measured Thickness: 0 64 @theta of 0deg with* an axial position of 5 93 Limited Scan? (YIN):I n ________ Analyzed by: .,.-".,* *,.*.Date: */_*]0. Analyzed by: v*/A" Date: 6'/ 4 0'3-IDI£ 9/221022 51 PM Nozzle 42 Page 1 of 2
-- I 4.
* - C -. .4 45 Nozzle 42 Profile FRAMATOME ANP 7.
15.0 14.5 --- - --*-- --- - ----- "- 'IF r r 14.05......-........ 2t...... ..... --------- ------------------ 14.0 ---- - - -- -- -------- ------------------ .. - ------ 13.5.................... -------- ------------------- ------------------- ------------------- ------------------- 13.0 ............................... -------- ------------------ ------------------- ------------------- ------------------- 12.5---- -------- 7----------------- 1 11 ----------------- ------------------- 12.0 ----.... .......... ------- ------------------ ------------------ ------------------- ------------ ----- --- -- . .. .',,.. . . 11.5 ..........- .......... 11.0 ....................- ......... -------- ------------------ ------------------- ------------------- ------------------- ------ ,--- ------------- ----. 10.5 - ............. -.......... -------- ------------------ ------------------- ------------------- ------------------- - - - - -- - - -- - - - - - - - - - -. 10.0 ------------------ -------- ------------------- ------------------- ----------- ------- ------------------- 9.5 ------------------------- -------- ------------------ ------------------- ---------- 9.0 ..................... -......... -------- ------------------ -------------------- ----------- -------- -------------------- -------------------- 8.5 .............................. -------- ---------------- ..........................
, 8.0.................... -------- ---------------- ----------
" 7.50.............. ------ f 4 1U4M4
............... I nuuuuuauus alIUnflhIflmE 7.0.............. -------- ------ ---------
5.5 -------- ------------------- ------------------- ------------------- ------------------- 5.0 ......................-......... -------- ------------------ ------------------- ------------------- ------------------- 4.5 ..................... r.......... --------- ------------------- ------------------- ------------------- ------------------- 4.0 ......................-......... I I 1 ------------------- -------- q 3.5 ....................-- -------- I
-S
- 1 I-
.i 3.0 ............................... -------- - -- - - - -- - -- - - - - - - --.
25....................
- ........ -------- --------------- ---- I ----- ---- ---- ----- ---- ..........
---- . . . .. * . Downhill 2.0 ....----........-------- --......... t-------------------. ------------------
------------------- - ------- ----- Side :
1.5 ---------------------------------.. -------- ------------------- --------------- .--- ..--- ........---- . . -*-- -- -- -- 1.0 .... .... -.... - ... 20 ------------------ --------------- ---------- . .. .. ...--.. .. .. .. . ..--- '** 0 .5 . . . . .'--....... - --.... ...... --------- ------------------- ---------- --- ------------- - .....--- ..... ... ,, .. _ , . .. , 0.010 I I I O0 50 250 - " * .300',-:., 350;, '
- 100 150 D 200 05
- , ,,.'D egrees -- 12.
-2 -4
-6 7
-9 -10 - -- 11
-13 -- 14 15 ------- 16
-Noz. End --INP"Uphill / Downh ill demarcation 2:51 PM9/22/02 Nozzle 42 Chart 1 Page 2 of 2
I V FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 4A Reactor Head Penetration t=*J* :*TM.I .AN Ultrasonic Examination Data Sheet Customer: /4rlC Plant: P/,Ai', 8-,,2cA Unit: I Penetration No.: Procedure: q-j-,-/O- ' Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " z-t1u* z7 o .3 A0317 16 Channel P/R 1 1A* ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEXM Data Analysis Software: Version23-.- ?.y " Cable Length: 50o Type: Rc. -U-+41 # Intermediate Connectors: I Calibration Block: e0o// 3DO/ Scan File No.: ,z.' / Calibration Setup: Initial Calibration File:/,?;:z4.. Final Calibration File: ,*-=ctz 2r. 31.
-or, I?, '"7 r
Scan Start: Z- 7q Scan Start: 0= -. ¢ Scan Stop: Z= l'i.o" Scan Stop: 0 ;$ Index Increment: 30 Channel Angle Serial No. Comments Z ~-*°. 5 zo z- -roF D
.3 . 1,"0 35070 q qv.S'zý5 S so Vy To Results: iF-ecordable Indications Leak Path Detected /
Axial Flaws Detected Circumferential Flaws Detected Comments: ', , ,r. %a ox C-r-k VkP 1 -0' Analyzed bv: Level: Date: -- . Reviewed b : Level: 'Date: TYPICAL DATA SHEET A') FIGURE 5
ý511 Page 31 of 32
AN *. CRDM Nozzle Ullirasenir 9Fvrnimn2*re-n ri Qk f Customer: Nuclear Management Corporation Plant: Point Beach jUnit: 1 Nozzle: 43 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i.) ID: 2.750 OD: 4.000 Thickness'. 0.625 Downhill Side of Nozzle (deg:): 48 End of Noz. (in.): 3.6 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scant*¢ .. Start: j deg @ j "< Stop:. Ideg Ca Setlip;: . Ch2 35202 Ch7 n/a Filies:, , ,. c S " ; ' , " " deg S 12 ;.Ch3 35070 Ch8 n/a Cir. Scan Start:22.66deg@L*5j" Stop:0 19 ideg @I 365j' Setup:[1 Ch4 35044 Ch9 n/a Files: A2266_04..1.55 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI _ _ _ 2 A
-3 4
5
-6 7
8 9 10 12 13 14 15 16 Data Loc. 48 78 108 138 168 198 228 258 288 318 348 18 48 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 Inches MAX. 6.86 690 7 04 7.41 8.02 8.39 8 58 8 39 8.16 7.69 7.33 7.08 6 86 Inches _MIN. 4.76 499 537 569 6.25 6 81 6.95 681 6.39 5.88 5.39 5.12 4.76 Inches Comments: Measured Thickness: 0 63 @ theta of 6943 deg with an axial position of 944 Limited Scan? (YIN): N Analyzed by: Date: - Analyzed by: Aj Date: 9/23/029 34 AM Nozzle 43 c ?/'4a... Page 1 of 2 I
,-Nozzle 43 Profile ., . :, .. '*;- .
FRAMATOME ANP 15.0- ,
- 14.5,------- --- ------------ ---------- I ----------------- -----------------
14.0 ---- --- - -- - -- -- - - -- - -- ---------- ----------------- ----------------- ------------------ ---------- 13.5 ---------- ----------------- ----------------- ----------------- --------------- 13.0 ........................................... ---------- ----------------- 12.5 -- 12.0 -..----- ....--------- 11.5 ------------------- 11.0 -- 10.5 ......................................... ---------- ----------------- I---................ 10.0 ---------- k"-------------- ----------------- -::::::::::::::::: 9.5 ---------- ---------------- ----------------- ----------------- L................. 9.0 ---------- ----------------- ----------------- -- ----.....---.. . ----------------- S-.---------------- 8.5 ----------- ------------------ ------------------ arm
'1 4
J 1 mai*imammmm*tl*ll*
---------- ----------------- ----------------- S....... . ........ ..
8 .0 ---------------------.. . .. .. . . .. . . . . .-
---------------- ----------------- ----------------- ::::::::::::::::::1 7.5 - .---- ----.-..;-.-:- ------------. . .. .. -----------------
6 .5 --- ------ ------------- ------ --- -----. -... .. 6.0 ------------ - -- ----- 5.5 ---- --------. ---
----------------- ------------------ ------------------ S.....
5 .0 ....... .....
.0 ---- ---- --- --...---
----r-... . ..-- --
................ -------------- ------------------------.-------------.... I
......-------------- Downhill 7..'.
Side
---------.... ---................---............. 4 --.....
- , --. ,- . -,- -- S........ .,.. ...... .. .. . , , ,,. :- *
- - - - - - - - - k" , ,
150 200 , . 250
,_________..:*,,**. .5 .4:' ,10 300, , :
-2 -.---==.3 -4
-6 -7 -8
--- 9 -10 -11 - - -12
-- 13 - 14 -15 16 Noz. .End b4f'~~41 "='""~"~Uphill / Downhill demarcation 9:34 AM9123/02 Nozzle 43 Chart I Pa1ge 22of_
Page of 2
P ýAIV FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-1S1-100-09 I o PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1.
*Reactor Head Penetration FMAM*TOME AMoP Ultrasonic Examination Data Sheet Customer: M _. Plant: Fv/ B&--,,tA Unit:
Penetration No.: 9Z. Procedure: ,00-/"-
/O- -of Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan I l *-z7o 3 A0o3i7 16 Channel P/R II1 ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX"" Data Analysis Software: Version a-.5- ,.g Cable Length: 5 01 Type: 12.(-,-U'A # Intermediate Connectors: Calibration Block: d//,I3rE/ Calibration Setup: Scan File No.: 2,* .g 2 7.$ Initial Calibration File:1Z2-.62 1.. 29.3o Final Calibration File: I"z-zt4 s".i.r, 37 Scan Start: Z .L47" Scan Start:0= -<- Scan Stop: Z= ji.c ' Scan Stop:0=y74r. Index Increment: 3° Chanrnel Angle Serial No. Comments 6 35oqq Z 3o*I* 3,fZoZ o* 3 (.,,os 350*0o 5" f 005 3S052.z Results: o"ecordable Indicationss Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzedb :Leve 1: -27: Date: 49- :2 2-0 Reviewed by: -Level: Date: ' ~~
-/ TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
d A. FR A".A-ntATO AV*JP
- --.---...- '*****n**-*s.*s.I5 I..'L4Ll JIIL C..... ... .A ti.tr~c~n i"*r.; F--*
Customer: Nuclear Management Corporation . . Plant: Point Beach I l Unit: 1 Qk,,l W%;f¢ Nozzle: -44 Procedure: 54-ISI-100-09 INozzle Dimensions: (ia.) ID: 2.750 CD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 263 End of Noz. (in.): 3.58 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scar'v t, Start: deg:@I., . . . Stop:, ideg @ j. Setup:i"
- . Ch2 35202 Ch7 nla iFiles" "'-. . -' Ch3 35070 Ch8 n/a Circ. Scan Start: 0.47 deg @1[-5-" Stop: 19 Ideg @1 3651' Setup:[ 1 Ch4 35044 Ch9 n/a Files: A2265_21.37.31 Cal Block SIN: 60119300 - Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-1 NRI -3 -4 -6
-7 8 9 10 11 12 13 14 15 17 Data Loc. 263 293 323 353 23 53 83 113 143 173 203 233 263 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 Inches MAX. 6 56 6.74 7.14 7.59 8.30 8 30 8.30 8 17 7.90 7.55 MIN. 7.14 6.78 6 56 . Inches 4.78 500 531 5.72 696 6.92 687 6.95 6.14 560 5.18 Comments: Measured Thickness: 500 4.78 Inches 063 1@ theta of 93 deg with an axial position of 9.15 Limited Scan? (YIN): N Analyzed by:-K, Date: 2-2'Z- 0-2 Analyzed by: Date: 9123/029:32 AM Nozzle 44 Pag 1 of 2 Pagel1 of 2
- t,'.
,a-,.
.4,...
Nozzle 44 Profile - FIRAMATOME ANP a a -.
"'-a 15.0 0 I I I - I 14.5
_: -------------- 1................. 14.0 .................. ----------------- ----------------- . i i 13.5
----------------- ----------------- ----------------- S........ - ----- ;. ..
13.0
------------- i .. .---............
----------------- ----------------- ----------------- --............ ---.... upSl:[do 12.5 12.0 11.5 11.0 ---------------- ---------------- ----------------- ----------------- I........ .........
10.5 ----------------- ---------------- .................
-i ----------------- ----------------- -----------------
10.0 ----------------- 9.5 ----------------- I -------------- 9.0 ----------------- ---------------- ----------------- ----------------- ----------------- 8.5 ----------------- ---------------- ----------------- ------------------ ----------------- 8.0 ------------------ ----------------
ý;
----------------- ----------------- I 7.5 7.0 6.5
~
.t~hithIhfliiWf lMISIU~IfVIMAA WIt~h kf~lzMuhkwk Sh7 khý hfIýtar h~t~h4*i~7I1I~t1~iuu
- - - - -bh-
- -n--n-h- -
6.0 ----------------- 5.5 ----------------- - --...-----------. 1................ 5.0 4.5 ----------------- 4.0 ------------------ L:Z: ------------- 3.5 i ]* ' .............. ... a............ 3.0
. ...... ---- .......--- ------..............--- ...............--- ...........---.---.....--.---...----. Downhill 2.5 -----------------------------------------------------------------------------
2.0 ------------------------------------------------------------------------ Side
. -. .-. -. 7t
. ----- . . . .. . . . . ..- . . . . . . ..-. . . . . . . ..- . . . . . ..-- --. . . . . . . ..- L . . . .L. . -: " ,*.
1.5 ~~~~~~~~-------------------- -------------------------------------------------------- 1.0 0.5
- t -
- .. .. ,-., L..:
.. . .. .. . t.................
.. . I- ........- -- -....
* -a -
.a? 'tt
"'1 4%tat.,
7 ; rŽ( 0.0
- 0. '. - 100., 150 200 250 300, 350 , " , , .
-2 a.a-a..3 -4
"-5 -6 7 8
- 9 -10 ----- 11 --- 12
- 13 -- 14 - 15 --..- 16 I
- Noz. End .......... 1 -="-au Uphill / Downhill demarcation 9:32 AM9/23/02 Nozzle 44 Chart 1 @9k09-/. - Page 2 of 2 1%
P 014ThAýV 7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration FRANIAr=_E AMP Ultrasonic Examination Data Sheet Customer: M/c. Plant: Pzl. ',e., Unit: Penetration No.: $"- Procedure: " Equipment: Description VH# Cal. Due Date SN# gTomoscan , f-7 o 33I7.
/Z 16 Channel P/R I/A ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version-3.. ..*.0 MY Cable Length: 5O1 Type: IZG.,- t # Intermediate Connectors: I Calibration Block: 1,0/113DO/ Calibration Setup:
ccan File No.: v.'~.. 6 f-
/47. Initial Calibration File: v , - /.O. 2.36 Final Calibration File: A.z.L;-ox'.i . .77 Scan Start: Z '/q7 Scan Start:' = -.X Scan Stop: Z = 17.o Scan Stop: e= 7-c.s-'
Index Increment: 30 Channel Ang1e Serial No. Comments
/ 60 .35Fo/
.30
(,,"fs -"5*zoz OD 3 4 's -35*0 O Results: ti Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: ,Analyzed y: .'-.-- . .--- Level: Date:.9" Reviewed by: Level: Date: /o--O/ TYPICAL DATA'SHEET FIGURE 5 (ý914L+' Fage 31 of 32
A A C-ustomer: Nuclear Management Corporation
,- .=.*. *uoumt
!Plant: Point Beach
~AI,-^llll1tUII UI[dII TU-nit:
oi*i~ee Nozzle: 45 Procedure: 54-ISI-100-09 JNozzle Dimensions: (Rh.) ID: 2.750 OD: 4,000 'Thickness: 0.625 Downhill Side of Nozzle (deg.): 285 'End of Noz. (in.): 3.6 Ch 1 35044 ' Ch 6 -35052
*;xa Scan', Start"-+*:" deg';,.-:" ýtop'o' =".-;.' setupI "-i'* Ch2 35202 Ch7 n/a
. * .. .. .. ,,*- Ch3 35070 Ch8 n/a Circ. Scan Start: -5deg 1 0Stop:.
73 I dog @9 S 1 Ch4 35044 Ch9 n/a Files: A2265_20.16.54 Cal Block SIN: Depth EdPitI 60119300 Ch 5 35052 Ch 10n/a EdPoint 2 Axa dutdCr. Extent Flaw Flaw Flaw Fla Weld Location Flaw Surface to Mi Mi Max Max Total Mi Max Total Length Angle TWO Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Mn Max 7--'5 9 T 13 1 T 16_ _ _ __ _ _ _ _ _ _ - _ __ _ _ _ _ _ 12 - - - - _ _-. 13
`14 15 16 17 Data Loc. 285 315 345 15 45 75 105 135 165 195 225 255 285 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 PROFILE 300 330 360 Noz. End 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 360 3.60 3.60 3.60 MAX. 647 665 688 8.09 8.06 821 3.60 Inches 8.15 809 7.83 7.44 7.00 662 6.47 Inches
.MIN. 4 87 T4.87 5.14 665 6.71 6.79 6.91 6.76 6.29 5.73 5.26 4.99 4.87 Inches Comments: Measured Thickness 063 thetaof 135 deg with anaxial position of 11.21 LImited Scan? (Y/N): N Analyzed by: Date: ---vo9 . 0 IL. Analyzed by: Date:
9/23/029'32 AM 9I2IO2~32AMNozzle 45 914iAV- Page 1 of 2
.... J Ji
-- .. -'-A NaP Nozzle 45 Profile
, " FRAMATOMR ANP 4 ,- .
a . - A 15.0' 14.5 -- ------------ -------- ----------------- ----------------- ----------------- ------------------ ------------------- 14.0 -- ------- --- ------ - -- ----------------- ----------------- ----------------- ----------------- --------------- i--- 13.5 ------------------- ..------------- ... ----------------- ----------------- ----------------- ----------------- 13 .0 ...... - --I - ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- 12 .5 . .. . . . . . . . . .. . .. . ... . . . .. . . . .. . . .. .. ----------------- ----------------- ----------------- ----------------- ----------------- 12.0 ------------------.. 11.5 .. . . . . . . . .. . . . . . . . ----------------- 1 1.0 - ..---------------- ..------------- ..------------------ ------------------ ------------------ ------------------ ----------------- ...... 10 .5 ---------- -- ------ . .. . . . . .. . . ...- I -- .5-
~~~~~
-- 1--- -- 1--
.U --...............-................... ---------------- ----------------- -----------------
8.5 ----------------- ---------------- ------------------ ------------------ 8.0 ---- 7.5 t---------- t...-*-----'--------, *----------*--------....... ------------ ...... 7.0 ---------------- ---------------- ---------------- ------- ----- ---------------- ----------------- 6.5 1-"' ----------- "777 ------------ ------------------- ---------------- 6.0 ----------------- -------- ------ ---------------- ---------------- ---------------- ------------ ----------------- 5.5 ----------------- ------ --------- ---------------- ---------------- ---------------- ----------------- 5.0 --------------- ----------- ---------------- ---------------- ---------------- ----------------------- ----------------- ----------------- 4.5 ----------------- ---------------- ---------------- ----------------- ---------------- ------------------ ----------------- 4.0 ------------------ ----------------- ----------------- ----------------- 3.5 .......... + .........-......----... ----------------- 3.0 ---------------- ---------------- ----------------- ----------------- ------- - 2.5 ---------------- 7- Downhill
---------------- ----------------- ----------------- ----------------- ----------------- II ý 1ý Side 2.0 -.--. --- ----- ... ...
1.5 ------------------------- ---------- ---------------- 1.0 - --------- . . . . .[----- --- -- -------------- ------------- 0 .5 - .......---I .......-- ------ ----------- ------------------ --- - - -- - - - 0.0 ---------- ------------------ ------ 100 150 , 200 , 250 ',; 00", , ,: . 350"* '"';J " ;*
--- 10 - - 11 ---. 12
. .. 14 -15 ..... 16
- ! -'"I-
--- -N z. End ='===Uphill /Downhill demarcation 1
9:32 AM9/23/02 Page 2 of 2 Nozzle 45 Chart I1 ) ],.,l.
FRAMATOM-.ANp NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations SPRCEDRE O.:54-S- 00 PROCEDURE NO.: 54-0-100-0I Reactor Head Penetration F*Al=-M.E AM*.P Ultrasonic Examination Data Sheet Customer: Nnrc Plant: ,CPo/,. BeqA Unit: I Penetration No.: Procedure: 6"q-27-A/00- Of Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -i I-f 2 /z-7o - Ao3i 7 16 Channel P/R N-1i .WIA N/1 ACCUSONEX` Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3-" -1.S Cable Length: 5o0 Type: Rc.,- 1-,4 # Intermediate Connectors: I Calibration Block:.&o//,.3vEI. Calibration Setup: S'can File No.: Initial Calibration File: ,2.2"2.,,._/o.28.3 A.1'&Z.,£".... iO..o5",9. *Final Calibration File: , I*.3, Scan Start: Z = o.v-1 Scan Start: 0 = -5 Scan Stop: Z = /MO Scan Stop: 0 = 3,, t .Index Increment: 30 S Channeil Angle Serial No. Comments 3 &.O"s -35ojO 6,~ os ~ 36
*o2 5 Results: irbje Idicatýions Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed b: Level: / Date: Reviewed by: - Level: "7 Date: /O/,/0 -L_ 1 TYPICAL DATA SHEET A4-3 O-04 1 FIGURE 5 Page 31 of 32
A( FRAMATOY'E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 46 Procedure: 54-ISI-100-09 Nozzle Dimensions: (Inb) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg-): 308 End of Noz. (in.): 3.67 Probe Serial No.'s: Ch i 35044 Ch 6 35052 -xlal Scan',-Ji :Q- 5tart:ld- - : .'1 StoP'l, __d_,;.etup;0 -.,' $.-, Ch2 35202 Ch7 n/a Filesi: ~~~~~~~~~~~~~~........
....*................. ,......................- dg:~
-, :-,-*..... =.....** h3500 h nl S.......
Circ. Scan Start:[ -5deg @ 0.47 o Stop:I 365 Ideg @I" Setup:1 1 h335070 Ch3 Ch4 35044 ChB Ch9 n/a n/a Files: A226517.05.27 Cal Block SIN: 60119300 - Ch 5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adiusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 2
-3 4
5 6
-7 8 __
9 10 12 13 14 15 16 17 Data Loc. 308 338 8 38 68 98 128 158 188 218 248 278 308 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 Inches MAX. 653 661 800 7.87 8.00 8.10 8.00 7 94 7 66 7.25 7.00 6.77 6 53 Inches MIN. 5.12 520 677 669 692 7.00 6.95 669 639 5.87 5.47 5.22 5.12 Inches Comments: Measured Thickness: 062 @ theta of 1 deg with an axial position of 549 Limited Scan? (Y/N): n Analyzed by: Date: /7 /7-- Analyzed by: ri 7A Date: 9/22/026-59 PM Nozzle 46 Page 1 of 2
Zo 10Z I PNOL19V91"IZZON ZOIZZI6V'd 69:9 U0ileolewep ijjqumocjI / 11qdnmmnn~umos PU370ZON. 9 6-ir- 9
.4 44- .
.4 4. 4' 4- -.4 44.4 2.
seaoe 4,
*>. .4 4 4 4Q9 OOL 44/444.4
+ + .1.
4'--------
------------------- ------------------ ------------------ .............. - - 90 4 ---.44
- 4. 4 4 -- -- --
" O .4 .4 4~4 11444
--- ------ -------- -------------------I ------------------- -----------------
---------- *------- ------------ -------------------- -------------- ----- --------w---------- -----------------
nin ---------------
-,=, -----ý - ;;;;;:------ w----- --------
- ------------- =r (D
.a.ý- - -
a
--------- ----- -l
------------------- -------V--
4 -- ' - --- 44 - -- 44 4 4 4 444444.44, 4 . 4-- 444444------------
- 44. 4. *.4 -- ----
7 7 ----------
-- -- - , 4. --' 44-
----------- I.......
I ------------------- ........: ---------- ----------------
-------------- ------------------- I------------------- -------------------- -----------------
444 .44;444 4.4, . 4... 4*4 4-44
.4" .4-4 44.444,44 4
- 4 I
-4 I ________ j ________ I ________
-4 'U (44 44444 ' >',, .44 44-. *4-1.
*4,4.441;4.-4 4
4 (,* 4 4 4 4 ~ '.'4 NV
'89IO~d 9V OIZZON 4 . 4 ("'4' 444 4/ 4 -- 4 0
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-4Si.100-09 f PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
.A Reactor Head Penetration PJP.AMMMC AMP Ultrasonic Examination Data Sheet Customer: "Mnc Plant: h,,,# e,,. ,tA Unit:
Penetration No.: 7 Procedure: 6"q-o$/-1-/ Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -/z.7o o3i " 16 Channel P/R / 1A/ ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3-" 3.. Cable Length: 50'1 Type: R.-I"-* # Intermedibte Connectors: I Calibration Block: e o/I 3zvE/ Calibration Setup:
"Scan File No.: A le'-.o7.
0 Initial Calibration File: AssLt,2-jo.Z S.3o Final Calibration File: ,7vzc-..r.19. Scan Start: Z = 0, q:7" Scan Start: e = -5 Scan Stop: Z = "2.4 Scan Stop: 0 =4r Index Increment: 30
-Channel Angle Serial No. Comments 1 6' 35'oWq 3 /- 3-51D "S5zo *s
. 0'CI -35o0?
q~ ~ s~.Z* o q,ý "ro b Os 36oq2.. Results: o Recordable Indications> Leak Path Detected / Axial Flaws Detected Circumferential Flaws Dftected Comments: Analyzed I*y: - Level: Date: '/ Reviewed by: , ,. Level: Date: 16121 TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
Ac CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 47 Procedure: 54-ISI-100-09 INozzle Dimensions: (Ia.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 315 End of NozL (in.): 3.68 Probe Serial No.'s: Ch 1 35044 Ch' 35052 AxIal Scan* Sta!t:I d "- "',0,stor:.l--. Ide l -4"Sl'_;_ Ch2 35202 Ch7 n/a ________________________i.._____________________ Ch3 35070 Ch8 n/a Circ. Scan Start:1 -51deg @1 047_" Stop:I 365 Ideg @1 18861' Setup: I Ch4 35044 Ch9 n/a Files: 5-~kMTM______ A2265_16.07.34 _______ Nozzle_ Cal Ultrasoni Block_ SIN: Examiatio 60119300Data___ Sheet_ Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 2 3 4 6 7
-8 9
10 11 12 13 14 15 16 17 Data Loc. 315 _____ 6~~~~~~~~~~~~0 345 15 2______ 45 1____ 75 _____ 105 ___ 135 165 195 225 255 285 315 Degrees WELD Noz. Loc. 0 30 60 90 120 150S 180 210 240 270 300 330 360 Deglrees PROFILE Noz, End 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 Inches MAX. 6.77 6.90 8.17 8,10 8 24 8.33 18 33 8 17 7.83 7.45 7.11 16.88 6.77 jInches MIN. 532 541 688 695 7.11 7.31 17.31 7.04 665 608 561 15.39 5 32= inches Comments: Measured Thlckness:l 0 63 @ theta of 1deglwith an axal position of 9 84 Limited Scan? (YIN): n I Analyzed by: / . Date: q'/717O. Analyzed by: vi/1A Date: 9/22/026 20 PM Nozzle 47 page 1 of 2
1 t t *:-"4' ' 4 Nozzle 47 Profile ' ' * . 5'$
, ,FRAMATOME AN1P ' +C"+ ' 4 *,,. *+f
'41 14.5 " '- ---'7 ------------- --................ ..
i 14.0 - I-
---- ------------------ I-----............... ------... . .......-
13.5 ....-- . .
--.................... +-.....---------------
13.0 - ..-------------------------------------- -... -------------- S................. -------- -----.. --- ---.
- o. ------------------
S.... . ......... -77". 1 2.5 - ..--------------- ..- ------------------- ----------------- ------------------ 12.0 11.5 ............-
------- 7
------------- 2---- ------------------
11.0 -------------------- ------------------- --- -------------- - 10.5 - ............ ------------------- -... -------------- S................... ------------------ 10.0---------------------------------- -------------- --------- ------------------ ------------------- 9.5 ----------------- ------------------ -------------- ------------ A ----- ------------------ ------------------- 9.0 ----------------------------------------- 8 .5 ....................----..................- -...
,, 8.0 ---------
8.5 --------------------- --------------------
-I t"S 7.0 7 ------ ...
........... .. I 4 UiuiflflIbbhamImhn 4! nrnu n1,hnnunummu I
------- 77:7:777-7 6.5 --------------------- -- .. --. ..- .-- .. ---
6.0 5.5
------------- I------
5.0 --- -- - -- - - - ------------------- . . .. . . t.----.. . --------------- 4.5 ---------------------. -.----------------- .-.---------------
------------------- ----------....----.- I------- ---------- -------------------
4.0 --------------------- -------------------- --... --------------- -------------------- ----------..-.-.---- ---------. --------- 3 .5 ------ ------------- 3 .0 --------------------- -------------------. -... - -............... --.-.-.-.-.-..-.-.-.-.- 2.5 .... 7. --
-- - - ------------------- ----. . .... - - - - ------- --- Downhill 2.0 . -----
. ------------------ :--. .---.. .- .- .---- . -------- -------------------- ----------- ------------- Side-1.5 j ...................------- ................
1.0 .. ..-------.. .
-- -- -- r"-- ----------------..----
0.5 .. .. ----.-. .- L ---------..- ..-- -_ . 0.0 ' .. . . .. ... . . ... . .. - *.- 4 150 . 200. 250 ". " '.300 , 3 50 r , 01 ',0' 50. ,+, . . + +, -. +,, , ' ,,-, F "+. A+ Degrees , , ,+ ,,* ' , .- . - .., .* ; " '.+
-- 5 -2 - 3 -- 4
-6 7 -- 8
-9 -- 10 -- 11 ---- 12
-- 13 14 ,15 16
--- Noz. End --.,--1 "On "Uphill I Downhill demarcation 6:20 PM9/22/02 Nozzle 47 Chart 1 Page 2 of 2
P o1/AAIV7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I. PROCEDURE NO.: 54-1SI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
*A* Reactor Head Penetration FM* OE AtNp Ultrasonic Examination Data Sheet Customer: AjM Plant: Bo,,,, 1' Unit: I Penetration No.: Procedure: 5q",'-/-2--/D '-Of 0 Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan 7iL17- 7 o ;Z0o3i7 16 Channel PIR 1U/A ACCUSONEX*M Data Acquisition Software: Version e.2.5 ACCUSONEX' Data Analysis Software: Version 3.8 0) Cable Length: 501 Type: R6,- 1-.+ # Intermediate Connectors: Calibration Block: &-o//,93DE/ Calibration Setup:
'Scan File No.: , -/. *3-'Z.- Initial Calibration File: _
Final Calibration File: A.2 - S'.
' /03 Scan Start: Z q7"' Scan Start: 0=. V Scan Stop: Z= 12. 7 Scan Stop: e= Ys-Index Increment: 30 Channeg Angle Serial No. Comments S 6° -55o~qq 60 -350-f 3 - &0"s "55*Zo
,.i q4S-z6" -S o -r*o F=Jb 5" &_e56 3 6OFz Resultsid ýNoRecordable Indications* -LeakPath Detected t7oa_ Flaws Detected! Circumferential Flaws Detected Comments: tjgr%
A nalyzedl~:./.,.*/IL; Level: -2r_ Date: 9--21-o'-z-LReviewed by: /"Level: Date: /-* z TYPICAL DATA'SHEET FIGURE 5 Page 31 of 32
A FPA.-ATOM*" ANt=r CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Cor oration Plant: Point Beach Unit: 1 ' Nozzle: 48 Procedure: 54-ISI-100-09 INozzle Dimensions: (il) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg): 47 End of Noz. (In.): 1.29 Probe Serial No.'s: Ch i 35044 Ch 6 35052
,XIdl Schn'04,1,
,~~ l,ýJ1.P.@ stop: T,-,-, .";" e g @1 S t o p:,,I *&,.I Ch2 3,52'2 35202 Ch7 n/a
~Ies~ ~ ,~.~ . ~t~Ch3 35070 Ch8 n/a Circ. Scan Start:I 0.47jdeg @[_-5 " Stop:I 12.71 Ideg @1 3651" Stop: Ch4 35044 Ch9 n/a Files: A2265_01.31.25 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI ,
-3 4 5 6 8
-9 10 11 12 13 14 15 16 17 Data Loc. 47 77 107 137 167 197 227 257 287 317 347 17 47 Degrees 60 90 120 150 180 210 20 270 300 330 360 Degrees WELD Noz. Loc. 0 30 1.29 1.29 1.29 1.2 1.29 1.29 1.2 1.29 1.29 1.29 1.29 Inches PROFILE Noz. End 1.29 1.29 MAX. 4 09 14.41 14.70 1 5.19 5 5B8 - 5 82 5 95 5 93 5.58 5 21 4.72 4.54 4 09 Inches MIN. 3.19 1 3.31 13 60 4 03 4 46 14.76 4 97d 4 82 4.46 4.09 3.64 13.27 3.19 Inches Comments: Mleasured Thickness: 0.64- 75 -thetaof 2541 de6l with an axial position of 9.56, Limited Scan? (YINF: N 1Analyzed by: , ... *: , _DateF73 -I *a " Analyzed by: 37//A Date:
9/22/028:59 AM Nozzle 48 Page I of 2 ag 1 of 2
AMT". Nozzle 48 Profile ""1 FRAMATOME ANP 15.0-. r a r T a -- - - . ,
--- .--- , ,I-14.5 14.0 S.. . _- ... . . 2 '., 2 .. a"
. *-. ":*2..
. 2.It ' ""** '""
13.5 -------------------- 13.0 St... 4 ------------------- 4 7 ---- i--- - ---------------.. ----- ----- --- -Uphilll--; S...._.._............... Up il,., 12.5 12.0 4.................... 11.5 11.0 r................... _: ----------------
------------------ 4.................... -------------------
[][))--[-]-----]--- 10.5 10.0 t................... 9.5 9.0 [------------------- ................... n-................... 8.5 8.0 S7nA 7.5 6.5 -..----..------------... 6.0 --- - -- - - --- - 5.5 ------------------------ ------------------- ------------------- 5.0 4.5 4.0 3.5 3.0 2.5 Downhill 2.0 ......... ...... ..... ,.... ..... ........ . ...----- ...... ....... ........ ....... . ....... ....... ........-------.......-...-.-.......--... _.---"--....--.- 7 . Side 1.5 1.0 0.5 Ant 0 . 50 100 150 200 '250 300" 2 350 "
' t Degrees 4 ;.- " - ."'A 4k"J 4
'-41"
- 2 - 4 I"'
Th 4
*-5 -6 7 -8 4
-- 13101 -1
""-13 - 14 -15 "'4'"
' Noz. End ........ 1 m"-'"='Uphill I Downhill demarcation 8:59 AM9/22/02 Nozzle 48 Chart 1 (Page/rof Page 2 of 2
I4,W$7A,ýI7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations j PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration FY4M.A=0tMZAP Ultrasonic Examination Data Sheet Customer: NM'c Plant: ,,, 8,.., Unit: I Penetration No.: Yq Procedure: "-qjs/--/s90O9 Equipment: Description VH# Cal. Due Date SN# gTomoscan i -/L7.3 A0314 16 Channel P/R ACCUSONEXI MData Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version 3.8"w Cable Length: 65'0 Type: P- 1-'M # Intermediate Connectors: I Calibration Block: "6o// 3DC/ Calibration Setup: Scan File No.: ,4.2.-99-_ C : . -' Initial Calibration File: ,* z2 - . Final Calibration File: o- .I?.J7 Scan Start: Z= ,7 "'Scan Start:,0= 0 Scan Stop: Z = -z.?7,'can Stop: 0= 3'C" Index Increment: 30 Channel Angle Serial No. Comments 1 60 . 35o/qq
?-- o IO'
/_ 13 5"_o 1"-_o_D _-
3 &0,,0- "3-So Results: *No Recordable Indicatio-n Leak Path Detected 11 Axial Flaws Detected Circumferential Flaws Detected Comments: ii KT. Analyzed by: .. Level: _ Date: - /-: "2.. Reviewed by: LLevel: Date: /J-1Z- I
- oTYPICAL DATA SHEET FIGURE 5 I $ Jro, Page 31 of 32
A
=R A M.LTOMI,1E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 49 Procedure: 54-ISI-100-09 INozzle Dimensions: (li.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 52 End of Noz. (in.): 0.94 Probe Serial No.'s: Ch i 35044 Ch 6 35052 t Ž,. I"-Stop:
deg 'e. Stop: Ch2 35202 Ch7 - n/a
,.~.~', -. ,,i , .. , .Ch3 35070 ChB n/a Circ. Scan Start:_ -Jdeg @1 0.47 I" Stop:' 365 Ideg @1 12"711" Stop: Ch4 35044 Chg n/a Files: A, . _*___-_o.o.-.7. Cal Block SIN: 60119300 Ch5 35052 Chl0 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (in.) Ratio Orientation Min Max I NRI "'__
23 ,_ 4 5 6 9 10
-11 12 13 14 is 16 Data Loc. 52 82 1112 142 172 202 232 262 1292 322 352 22 52 Degrees WELD Noz. Loc. 0 30 ' 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.94 0.94 0.94 0.94 0.94 10.94 0.94 0.94 0.94 0.S,4 0.94 0.94 0.94 Inches MAX. 3.92 4.07 4.46 4.76 5.13 5 56 5 62 5 49 5.17 4.70 4 53 4.07 3 92 lInches MIN. 2.66 2...276 3 05 3 58 3 88 4.39 4,47 4.29 3 88 3 53 3 04 2.70 2.66 lInches Comments: Measured Thickness: 0 64
- ht f 2131 dealwith an axial position of 6.2 Limited Scan? (YIN): _ N I i Analyzed by: fJA...**/,__Date: t?-.A; t- Analyzed by: 13* Date:
9/22/029:03 AM Nozzle49 ' Page 1 of 2 N
) k...
A FRAMATO0MANP Nozzle 49 Profile i!- 2 15.0 14.5 ------------------- 14.0 .................... S................... -................... 13.5 ................... .................... 13.0 ------------------
,=....................,
12.5 S................... ------------------ *................... ------------------ 7. 12.0' .................... ............... I... ------------------- 11.5 .................... ................... 11.0 ................... S.................... 10.5 ......... *........... ------------------ ------------------- . . . .. ........... r 10.0 ------------------- ------------------- 9.5 -..... . .... ... . .. ...
,i....................
9.0
.J.. ...... .......... 4....................
------------------- S.....................
8.5 -... . . . . . . . . . . . . . . . . ------------------ ,-. . . .. ... . . . .. . . . .. 4........... A......... ------------------- 8.0 ................... .................... 0) 7.5 ------------------ .................... 7.0 ------------------- 6.5 ------------------
*t....................
6.0 ................... -------------------- 5.5 ------------------ 5.0 ------------------- 4.5 S.. ............ .. .. . .. . . . . . .. --.. . . .. . . . . . . .. .Mu. . .. MO . .. . 4.0 3.5 . . .. .. .. .. .. .. .. .. .. .. ..~~~~~~~- .. .. . . . 3.0 S... . . . ... . ... . . . . .. . . . . .. . . .. .. . . .. .. . . . . ..--. 2.5 --- ---- i--- ---- ----------------------------------------- Downhill 2.0 l--- --- ---.-- --- .--- --- --- --. - -. - ---------- ---. I.--- ---.--- ------ ------- --- --- ---- --- -----. Side 1.5 -------- ------------- ---------- ---------- ---------------------------------- --
'L ;
1.0 0.5 0.0 0 50O 100 150 200 250 30'0, 350 . Degrees '
-2 -- 3 -4
-5 -6 7
--- 13 -10 --....l 12 14 _ _ 15
..-- "u-n'"UphillI Downh fill demarcation *:
Noz. End 1 9:03 AM9/22/02 Nozzle 49 Chart 1 7 . Page 2 of 2
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE I Remote Ultrasonic Examination hI Of Reactor Vessel Head Vent Line Penetrations 1 PROCEDURE NO.: 54-ISI-137"00 I___ PQ NO.: 54-PQ-137-Gi A RPV Vent Line'Vent line Data Sheet Customer: /Y/nt C Plant: Pojg/ 8e, Unit: Vent line No.: /, Procedure: 5'-q-/1/-137 - o Axial Scan Setup: , Scan Start: Z = -1. ;z Axial Scan File No.: A -ZL(, . Scan Stop: Z = .5.____ Channel Angle Serial No. 1- :O°L q-Z(,,,- OZo03 2 700S z-c.- v oZ0oo3 4 - 9;T 14,-ooo03
'_5
___- Ioloo3 Performedlby: Date: Analyzed by: , ,e-- Date: Results: o
-F-Iaws Detected Axial Flaws Detected Circ. Flaws Detected Comments: Z,*ee.'..reA. ,. .,,o /
It ... Figure 1 Ne Page 14 of 15
A CRDM Nn77In IIItrnni,,
-- - - - - --.------ 5S**
Fv2min2finn flf ULcS Qk*CL E 1 Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1. - Nozzle: Vent line Procedure: 54-ISI-137-00 with CIA FRA-02-012, PB-2-004INozzle Dimensions: (lit.) ID: 0.750 OD: 1.046 Thickness: 0.148 Downhill Side of Nozzle (deg.): 0 End of Noz. (In.): 0 Probe Serial No.'s: Chi1 9266-02003 Ch 6 n/a Axial Scab,;4 , .. Stt"l, .. Ideg : :o I .'-t6'--, -. Ide, . --'.-~Setup: ,', Ch2 9266-02003 Ch7 n/a Fi6; ~~: 6.r:V. I- Ch3 9266-02003 Ch8 n/a Circ. Scan Start: -51deg @ -1.7 " Stop: 365 Ideg @ [I j Setup:[ Ch4 9266-02003 Ch9 n/a Files: A226610.29.36, _11.00 52, _12.20 53 Cal Block SIN: 6012827D1 Ch5 9266-02003 Ch10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDlOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-2 3
4 5 6
-7 8 -9 10 12 "
13 14 T 16 _ 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 1 00 1.00 1.00 1.00 1 00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Inches MIN. 000 0.00 000 000 000 000 0.00 0.00 000 000 0.00 000 0.00 Inches Comments: Measured Thickness: @ theta of deg with an axial position of Limited Scan? (YIN): n Analyzed by: Date: bt. Analyzed by: r'.I Date: If 61 9/231025 05 PMV Data Sheet -Vent Line Page I of 2
.1-.,
Vent'Llne Profile C., rFRAMATOWE ANF I.,
'-'Ii 15.0' --I II
'.4-
--- 7--------------- I -------------------
I 14.5:. ---------- I E I 14.0 - - . ....... ---------- ------------------ ------------------- ------------------- ------------------- 13.5 ---- ----- ---.-- ---------- ------------------ ------------------- ------------------- ------------------- -- ---------------- 13.0 ........ ---------- ------------------ ------------------- ------------------- ---------------- ----- 12.5 .. . . .. . . . . .. .. . . .. . . .. .... . . ---------- ---------------- ------------------- ------------------- ------------------- 12.0 ............................ ---------- ------------------ ------------------- ------------------- ------------------- ----------------- 1 1.5 - ..--------------- ..- ------- ---------- ------------------ ------------------- ------------------- ------------------- ---------------e-. 11.0 -.-- ....------------------- ---------- ------------------ ------------------- ------------------- ------------------- ---------------- 10.5 .. . . . . . . . . .. . . . .. . .. . .. .. . . . ------------------- ------------------- 10.0 -.- .......----------- ------- I.., ------------------ ------------------- 9.5 -.--- ...-------------------
ý\------- ------------------- -------------------
------------------ ----------- ý\__-___. ------------------ -------------------
9.0 -.--- ....------------------- ---------- ------------------ ------------------ ------------------- ------------------- ------------------- 8.5 -..-- ...------------------- ---------- ------------------ ------------------ ------------------- ------------------- ------------------- cl) 8 .0 -..---------------- .- ------- ---------- ------------------ ------------------ ------------------- ------------------- -------------- X 0 7.5 -.-- ......----------- ------- ---------- ------------------ ------------------ ------------------- ------------------- i ------------------- 7.0 -..-- ...------------------- _Ij -------- ------------------ ------------------ ------------------ ------------------- ------------------- 6.5 ................... -........ ---------- ------------------ ------------------ ------------------- ------------------- --------- : --------- 6.0 -..-- ....------------------- ........... ------------------ -------------- ---- ------------------ ------------------- I ------------------- 5.5 ---------------- ------- ---------- ------------------ -------------- ---- ------------------- ------------------- ------------------- 5.0 -.--- ....------------------- ---------- ------------------ 4.5 -.-- ...------------------- ---------- ------------------ ------------------- ------------------- ------------------- 4.0 -.--- ....------------------- ---------- ------------------ ------------------ ------------------- 3.5 -.- .....------------.------. ---------- ------------------
-----------III--II
-- .4----------- ---- -------------------- ------------------- -------------------
3.0 -------I.........------.----- ---------- ------------------ ------------------ ------------------- 2.5 ---------------- ---- -- ---------- I
------------------- -------------- ----- ------------------ ---------- I......... ---------- Dowhhill 2.0 ------- ----------- ---------- ........... I------ ------------------- ----------- Side 1.5 4 1.0 -:i.......S..
- ilNg*H**
mM l .... I "no flmuamote[ g
*k=* U*kli .............
ýMmsp wkrm 1"MUNKMIUM I
Jl.. .. . *--__J P.mmum PONM "MMOM I mumov I I:i 0.5 --- - - - - -- - - - -- -I---- --- --------- -- -- - - --- i 0.0 , - I q
- _________
I 0 .5 o, . i6b " 150 200 250.. 35 0I,,
,. 7
.3grees.,- . ' ; *' , ', - ,.-=;
-2 - 3 4
-5 - 6 -7 11 -8
,. - 9 -. 10 ----..... . 12
. ,13 14 15 16
--, Noz.End ""=="kIUphill / Downhill demarcation 5:05 PM9/23/02 Data Sheet -Vent Line Chart 1 Pg 2 of Page o2,f 2}}
Text
{{#Wiki_filter:Nuclear Management Company, LLC Point Beach Nuclear Plant NMC Committed to NuclearExcellence 6610 Nuclear Road Two Rivers, WI 54241 NRC 2002-0102 10 CFR 50.54(f) November 15, 2002 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555 Docket 50-266 Point Beach Nuclear Plant (PBNP), Unit 1 Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings On August 3, 2001, the Nuclear Regulatory Commission (NRC) transmitted Bulletin (BL) 2001-01, "Circumferential Cracking of Reactor Pressure Vessel Head Penetration Nozzles." On March 18, 2002, the NRC transmitted BL 2002-01, "Reactor Pressure Vessel Head Degradation and Reactor Coolant Pressure Boundary Integrity." On August 9, 2002, the NRC transmitted BL 2002-02, "Reactor Pressure Vessel Head and Vessel Head Penetration Nozzle Inspection Programs." In BL 2001-01 the NRC requested addressees provide within 30 days after plant restart following the next refueling outage; a description of the extent of any vessel head penetration nozzle leakage and cracking detected, including the number, location, size, and nature of each crack detected. Furthermore, if cracking is detected, the report is required to include a description of the inspections, repairs, and other corrective actions taken to satisfy applicable regulatory requirements. In BL 2002-01 the NRC requested addressees provide within 30 days after plant restart following the next inspection of the reactor pressure vessel head; the inspection scope (if different than that provided in response to BL 2002-01, Item 1 .D) and results, including the location, size and nature of any degradation detected. Furthermore, the report is required to include the corrective actions taken and the root cause of the degradation. In BL 2002-02 the NRC requested addresses provide within 30 days after plant restart following the next inspection of the reactor pressure vessel head and vessel head penetration nozzles; the inspection scope and results, including the location, size, extent, and nature of any degradation (e.g., cracking, leakage, and wastage) that was detected. Furthermore, the report is required to include details of the non-destructive examination (NDE) used (i.e., method, number, type, and frequency of transducers or transducer packages, essential variables, equipment, procedure and personnel qualification requirements, including personnel pass/fail criteria), and criteria used to determine whether an indication, "shadow," or "backwall anomaly" is acceptable or rejectable.
NRC 2002-0102 Page 2 On October 16, 2002, Nuclear Management Company, LLC (NMC) completed its most recent refueling outage of Point Beach Nuclear Plant (PBNP) Unit 1. Attached to this letter is a discussion of the inspection scope and results, details of the NDE used, and the acceptability of the limited ultrasonic testing (UT) examinations performed on four of the forty-nine penetrations. Additionally, Westinghouse Electric Company performed a probabilistic analysis to determine whether the inspection results to date on PBNP Unit 1 control rod drive mechanism (CRDM) penetrations provide a risk-informed basis for pursuing a return to power. Proprietary and non-proprietary versions of the probabilistic analysis are provided in Enclosures 1 and 2, respectively. Both reports in Enclosures 1 and 2 are titled, "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations." Enclosed in this letter is a Westinghouse authorization letter, CAW-02-1559 (Enclosure 3), an accompanying affidavit (Enclosure 4), Proprietary Information Notice (Enclosure 5), and Copyright Notice (Enclosure 6). As Enclosure 1 contains information proprietary to Westinghouse Electric Company, it is supported by an affidavit signed by Westinghouse, the owner of the information. The affidavit sets forth the basis on which the information may be withheld from public disclosure by the Commission and addresses with specificity the considerations listed in paragraph (b) (4) of 10 CFR 2.790 of the Commission's' regulations. Accordingly, it is respectfully requested that the information which is proprietary to Westinghouse be withheld from public disclosure in accordance with 10 CFR 2.790 of the Commission's' regulations. Correspondence with respect to the copyright or proprietary aspects of the items listed above or the supporting Westinghouse Affidavit, should reference CAW-02-1559 and should be addressed to H. A. Sepp, Manager of Regulatory and Licensing Engineering, Westinghouse Electric Company, P.O. Box 355, Pittsburgh, Pennsylvania 15230-0355. to this letter contains the nozzle 1 examination results as presented in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This letter contains no new commitments and no revisions to existing commitments. I declare under penalty of perjury that the foregoing is true and accurate. Executed on November 15, 2002. RDS/kmd
NRC 2002-0102 Page 3
Attachment:
PBNP Unit 1 RPV Head and VHP Nozzle Inspection Discussion
Enclosures:
1 - "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations", (Proprietary) 2 - "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations", (Non-Proprietary) 3 - Westinghouse Proprietary Authorization Letter, CAW-02-1559 4 - Westinghouse Affidavit 5 - Westinghouse Proprietary Information Notice 6 - Westinghouse Copyright Notice 7 - "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report" cc (with enclosures): Project Manager, PBNP, USNRC, NRR cc (without enclosures): Regional Administrator, USNRC, Region III NRC Resident Inspector- PBNP
ATTACHMENT To Letter from A. J. Cayia (NMC) to Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01. 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings PBNP Unit 1 RPV Head and VHP Nozzle Inspection Discussion
NRC 2002-0102 Attachment "Page 2 PBNP Unit 1 Inspection Scope and Results Visual Examinations An above-head bare metal visual examination was performed on 100% of the surface area surrounding the PBNP Unit 1 vessel head penetrations (VHP). The examination was performed as described in the revised Nuclear Management Company, LLC (NMC) response to BL 2002-01, Item 1 .D, dated April 18; 2002. The examination resulted in an effective visual examination that revealed no evidence of boric acid deposition or wastage of the reactor pressure vessel (RPV)
'head. All RPV head penetrations were examined with no limitations or masking.
On April 2, 2002 the NMC provided the requested response to NRC BL 2002-01. On April 18, 2002 the NMC provided a revised response to NRC BL 2002-01. In each of these letters the NMC described a small area of apparent wastage on the PBNP Unit 1 RPV-head that occurred in the early 1970's. The description of the affected area on the RPV head was obtained from a first hand. account by an NMC staff member who was involved in repair of the RPV head insulation at the time of discovery. This area was searched for during the above-head bare metal visual examination performed on the PBNP Unit 1 RPV head during the most recent refueling outage. No evidence of the RPV head wastage described above was identified. Ultrasonic Examinations In addition to the above-head bare metal visual examination, ultrasonic examinations (UT) of the nozzle base material were performed. These examinations were performed as described in our response to BL 2002-02, Item 1 .A, dated September 12, 2002. The UT also included a "leak path" examination of each nozzle. All UT and "leak path" examinations revealed no evidence of cracking' or leakage. All nozzles without thermal sleeves (16) were examined using a rotating probe UT technique. The remaining penetrations containing thermal sleeves (33) were examined using a blade probe UT technique. -The initial blade probe UT examination of the nozzle 1 base material revealed several recordable indications.- The nozzle 1 thermal sleeve was removed to initiate repairs'and a 100% rotating UT
-was performed. Multiple transducers from both the axial and circumferential beam directions interrogated these indications during the rotating UT examination. The rotating UT results demonstrated that the indications were embedded flaws resulting from original construction J groove welding processes. These results were confirmed with the performance of two separate'
-liquid penetrant (PT) examinations. The initial UT indications seen were concluded to be a result of manufacturing defects and are not related to primary water stress cracking corrosion (PWSCC). No repairs were performed and the thermal sleeve was reattached. The nozzle 1 examination results are contained in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This report is contained in Enclosure 7. During the performance of the UT examination seven (7) penetrations with thermal sleeves initially had limitations in inspection coverage. In order to provide access to increased examination area, three (3) thermal sleeves were removed and rotating UT examinations were performed. The remaining four (4) nozzles had minor limitations in coverage as shown in Table 1. No shadow or backwall anomaly indications were identified during the performance of these examinations.
NRC 2002-0102 Attachment Page 3 Table 1 Inspection Summary Penetration(s) Coverage Description 1 100% Indications of possible fabrication-related flaw indications found through blade probe UT examination. Thermal sleeve removed to initiate repairs. 100% rotating UT performed with sleeve removed. Indications determined to be weld fabrication-related with the more accurate rotating probe UT. No indications found with confirmatory PT examination. No repairs required. Thermal sleeve reinstalled. 2-25 100% No indications. No restrictions or limitations. 26 78% No indications. Limited coverage justified through engineering analysis. 27 66% No indications. Limited coverage justified through engineering analysis. 28 52% No indications. Limited coverage justified through engineering analysis. 29 100% No indications. No restrictions or limitations. 30 50% No indications. Limited coverage justified through engineering analysis. 31 -33 100% Very limited coverage using blade probe due to physical restrictions. Thermal sleeves removed. 100% coverage obtained through use of rotating UT probe. Nozzle 32 had weld fabrication-related indications only. No flaw indications. Thermal sleeve installed. 34-49 100% No indications. No restrictions or limitations. The individual examination summary charts for nozzles 26, 27, 28 and 30 are located in Figures 1 through 4. The limited coverage on these nozzles was found to be acceptable through performance of engineering evaluations. These evaluations are described later in this document. Circ5 Axia'l Examhination Percentage 'Nozzle.J Area .;'-Length Length '78% 26 Area of Interest 0-3600 0 -6.56" Area Examined 0-2170 0-6.6" Area Not Examined 218-3060 0-6.5" Area Examined 307-3600 0-6.6" 270 d..$ Figure 1 - Nozzle 26 UT Exam Coverage
NRC 2002-0102 Attachment Page 4 Cire Examnina'tion 'Pecetg Nozzle Area, Length Axial Length 660%6 27 Area of Interest 0-3600 0 -6.56" Area Examined 0-1730 0-8.7" Area Not Examined 174-2050 0-6.5" Area Examined 206-2100 0-8.7" Area Not Examined 211-236c 0-6.56" ,o., Area Examined 237-2630 0-8.7" Area Not Examined 264-3320 0-6.56" Area Examined 333-3600 0-8.7" Figure 2 - Nozzle 27 UT Exam Coverage Cire' Axial 7..Examihnati6n Percentage -Nozzle Area Length ~:~Lenith ,. 52%, 28 Area of Interest 0-3600 0 -6.56" Area Examined 0-890 0-8.6" Area Not Examined 90-2610 0-6.56" Area Examined 262-3600 0-8.6" Figure 3 - Nozzle 28 UT Exam Coverage Circ Examiniation Per&entage ,Nozzle. Area "Lgh Aia Length , 50%, 30 Area of Interest 0-3600 0 -6.56" Area Examined 0-890 0-8.6" Area Not Examined 90-1300 0-6.56" Area Examined 131-2390 0-8.6" Area Not Examined 240-3600 0-6.56" 180* Figure 4 - Nozzle 30 UT Exam Coverage
NRC 2002-0102 Attachment Page 5 Liquid Penetrant Examinations As discussed previously, two separate liquid penetrant (PT) examinations were performed on the nozzle 1 J-groove wetted surface to characterize suspected UT indications found during initial blade probe UT examinations. The PT examinations revealed no crack indications. These results were in agreement with no indications found in separate rotating UT examinations following removal of the thermal sleeve. The initial UT indications seen were concluded to be a result of manufacturing defects and are not related to PWSCC. Acceptability of Limited UT Examination of Nozzles 26, 27, 28, and 30 As shown in Table 1, four (4) nozzles (26, 27, 28 and 30) received a UT examination of less than 100% coverage. These limited examinations have been found to be acceptable. This section describes that justification. Flaw Tolerance Evaluation Circumferential cracks located in the nozzle material are the area of prime interest due to the safety concern arising from nozzle ejection and LOCA. Therefore, a flaw tolerance evaluation, postulating a circumferential flaw in the region that was not interrogated by the UT examination was performed by Westinghouse Electric Company. The postulated flaw in this evaluation corresponds to 1800 and is consistent with the limitations documented in Figures 1 through 4. Figure 5 illustrates the time required for a postulated 1800 circumferentially oriented flaw to grow to a point of structural instability (3300) to be approximately 25 years of operation. Figure 5 is plotted as half the length of the circumferential flaw. This accounts for both ends of the flaw to growing equally. The evaluation uses plant specific stresses and operating temperature and the MRP-55 crack growth rate predictions. Based on the UT inspection results and this evaluation, there are no concerns with the structural integrity of the VHPs associated with the possibility of undetected circumferential cracking in the non-inspected areas over at least the next operating cycle. Proprietary and non-proprietary versions of the flaw tolerance evaluation (WCAP-1 4000 and WCAP-1 5950, respectively), were transmitted to the NRC by Westinghouse Electric Company on September 27, 2002.
NRC 2002-0102 Attachment Page 6 180.0o ! I I I 15000
=' 1200 - --
< ~~~CRI M N-1z. J 1 90.0 UI A I 860.0/
F ----
,,lI Service Life > 24
- 30.0,-/
00 0 10 20 30
- 40 50 period (year)
Figure 5 - Crack Growth Predictions for Circumferential Through-Wall Cracks Probabilistic Evaluation In addition to the work described above, Westinghouse Electric Company performed a probabilistic analysis. This work determined, with at least 95% confidence, that the seven penetrations with initial limitations in examination coverage would not produce an axial or circumferential flaw that would exceed the assumed critical sizes over a time interval of up to 14.5 additional effective full power years (EFPYs). This conclusion was based on conservative assumptions in average crack size, stresses influencing crack growth, and inspections performed to date. Proprietary and non-proprietary versions of the probabilistic analysis are provided in Enclosures 1 and 2, respectively. The results of the probabilistic analysis were then evaluated using the plant specific probabilistic risk assessment (PRA) to determine the potential risk significance of this activity. NMC conservatively postulated that a critical failure would lead to a medium loss of coolant accident (LOCA) with an equivalent diameter of more than 2 inches. The corresponding change in core damage frequency for this scenario was calculated to be less than 1E-6/year. These results demonstrate a very small change in plant risk and are consistent with the guidance contained within Regulatory Guide 1.174. 100% Visual and Other UT Examinations The detailed 100% UT examinations of 45 of the 49 CRDM nozzles and of the RPV head vent line, with no evidence of cracking or leakage, give assurance that PWSCC of the PBNP Unit 1 VHPs is not occurring. This is also evident in the results of the 100% visual examination performed on the RPV head exterior surface. These inspections support the evaluations previously discussed and give NMC confidence in the structural integrity of all PBNP Unit 1 VHP nozzles (including nozzles 26, 27, 28, and 30).
NRC 2002-0102 Attachment Page 7 NDE Methods and Qualifications All NDE personnel involved in these examinations and data analysis activities were certified as Level II or Level III NDE inspectors in accordance with their employer's written practices. Personnel certifications were reviewed and approved by the PBNP Level III prior to personnel performing examinations. Visual Examinations The above-head visual examinations (VT) were performed directly by qualified examiners. Additionally, a remote hand-held camera was used to record the examination images onto VCR tape. The procedures used in these VT examinations were qualified in accordance with the employer's written practices, ASME Section XI, and supplemented by'EPRI Report 1006296, Revision 1, 'Visual Examination for Leakage of PWR Reactor Head Penetrations on Top of RPV Head." Ultrasonic Examinations The detailed method of UT examinations performed is contained in Framatome ANP document "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report", dated October 5, 2002. This non-proprietary report describes the number, type and frequency of transducers, essential variables, equipment, and procedures. This report is contained in . A qualification program similar to the ASME Section XI, mandatory Appendix VIII, "Performance Demonstration For Ultrasonic Examination Systems," does not exist for UT testing of the VHP nozzle base material. Framatome ANP was the vendor that performed UT examinations during this most recent PBNP Unit 1 outage. As part of the EPRI MRP, Framatome ANP recently participated in a demonstration of the UT techniques used for detection of axial and circumferentially oriented flaws in the RPV head penetration tube material. These techniques and capabilities were demonstrated in blind testing that was attended by NRC reviewers. Framatome ANP has recently developed the "leak path" UT technique used in the PBNP Unit 1 examinations. It is a proprietary technique that has no formal qualification program. The "leak path" UT technique uses empirical data from the examination of approximately 270 nozzle penetrations. In examinations of VHPs since March 2001 with known bare metal visual leakage where the interference fit has been scanned, a UT "leak path" has been observed. Framatome has presented the "leak path" UT technique to the NRC for review on several occasions. The technical basis of this technique is described in a Framatome ANP proprietary document entitled, "Reactor Vessel Head Penetration Leak Path Qualification Report," dated February 6, 2002. Liquid Penetrant Examinations All personnel and procedures involved in the PT examinations were qualified in accordance with ASME Sections V and XI. The first PT was performed to the Framatome ANP procedure 54-ISI-244-06, "Liquid Penetrant Examination of Reactor Vessel Head Penetration from the Inside Surface." The second PT was performed to PBNP procedure NDE-451, "Liquid Penetrant Examination Temperature Applications 45 OF to 125 OF."
ENCLOSURE 2 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations" (Non-Proprietary)
Westinghouse Non-Proprietary Class 3 Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations
In its Fall outage of 2002, Point Beach Unit 1 Nuclear Power Plant attempted to inspect all 49 of its control rod drive mechanism (CRDM) penetrations but could not provide 100% inspection coverage of 7 of the penetrations. The purpose of the work documented in this letter report is to provide a probabilistic analysis to determine whether the inspection results to date on Point Beach Unit 1 CRDM penetrations can provide a risk-informed basis for pursuing a contemplated return to power, with inspections of the 7 partially examined penetrations at a future outage. Summary of Approach: The approach is to first establish the maximum number of axial and circumferential flaws that may be left in the base metal of the tubing for the 7 partially-inspected Unit 1 CRDM penetrations with 95% confidence that no one flaw will exceed the pertinent critical flaw size during the desired time interval. This calculation uses a probabilistic model derived from extreme value theory, with values for inputs (critical sizes and crack growth rates) taken from a recently-completed structural reliability study for Point Beach units 1 and 2 (WCAP14000). The maximum allowable number is then compared with the upper 95% confidence value on flaws projected to currently be in Unit l's set of CRDM penetrations based on a simple statistical evaluation of sample inspections to date. If the maximum allowable flaw number exceeds the upper confidence limit number, then it can be claimed with at least 95% confidence that the plant can return to power and operate for the contemplated interval without a flaw in the subject unit's CRDM penetrations progressing to its critical size. Summary of Results: Using this approach, the analysis concludes, with at least 95% confidence, that the 7 incompletely inspected penetrations of interest will not produce an axial or circ flaw that will exceed the assumed critical sizes over a time interval of up to 14.5 additional effective full power years (EFPY). This conclusion is based on conservative assumptions as to average crack size, to stresses influencing crack growth, and to inspections performed to date. Specifically, the distribution of flaws remaining in the 7 penetrations is assumed to have a mean depth of "through wall" with a length of 3 inches. Cracks grow at a rate consistent with the most stressed (outer layer) of the CRDM penetrations. No credit is taken for partial inspections. It should be noted, however, that no welds were inspected and no inferences are made here about weld integrity. Descriotion of the Work Performed (a, c)
Results Equation (2) is used to calculate the probability of the ith flaw in each sub-lot reaching full critical length (Table 2) within operating intervals ranging from 1 to 15 effective full power years for axial
and circ flaws. Equation (5) uses the probabilities in Table 2 and the target reliabilities of 95% to calculate the allowable number of flaws in the 7 penetrations for operating intervals out to 15 additional ("Target") EFPY shown in Table 3. Comparing Table 3 to the upper confidence number of 1 calculated above, the circ cracks limit the number of additional EFPY that Point Beach Unit 1 can go without inspecting the 7 subject penetrations to 14.5 EFPY. That is, at 14.5 additional EFPY the number of allowable leaks just matches the number of circ flaws that we are 95% confident will not be exceeded. We can thus say with at least 95% confidence that the 7 partially inspected penetrations will not generate a critical axial or circ flaw over a future ranging up to 14.5 EFPY. Table 2" Probability ith Flaw > Critical Length Before Target EFPY Target EFPY Axial Circ 1 1.16E-04 1.80E-03 1.5 1.78E-04 2.76E-03 2 2.43E-04 3.76E-03 2.5 3.1OE-04 4.80E-03 3 3.81 E-04 5.88E-03 3.5 4.55E-04 7.01E-03 4 5.32E-04 8.18E-03 4.5 6.12E-04 9.41E-03 5 6.96E-04 1.07E-02 5.5 7.84E-04 1.20E-02 6 8.76E-04 1.34E-02 6.5 9.71E-04 1.48E-02 7 1.07E-03 1.63E-02 7.5 1.18E-03 1.79E-02 8 1.28E-03 1.95E-02 8.5 1.40E-03 2.12E-02 9 1.52E-03 2.29E-02 95 1.64E-03 2.48E-02 10 1.77E-03 2.67E-02 10.5 1.91E-03 2.87E-02 11 2.05E-03 3.07E-02 11.5 2.20E-03 3.29E-02 12 2.35E-03 3.51E-02 12.5 2.51E-03 3.75E-02 13 2.68E-03 3.99E-02 13.5 2.86E-03 4.25E-02 14 3.04E-03 4.51E-02 14.5 3.24E-03 4.78E-02 15 3.44E-03 5.07E-02
Table 3. Allowable Number of Flaws @ 100% Criticsel Size 17 Tuibes* Target EFPY Axial Circ 1 7.0 7.0 1.5 7.0 7.0 2 7.0 7.0 2.5 7.0 7.0 3 7.0 7.0 3.5 7.0 7.0 4 7.0 6.2 4.5 7.0 5.4 5 7.0 4.8 5.5 7.0 4.2 6 7.0 38 6.5 7.0 3.4 7 7.0 3.1 7.5 7.0 2.8 8 7.0 2.6 8.5 7.0 2.4 9 7.0 2.2 9.5 7.0 2.0 10 7.0 1.9 10.5 7.0 1.8 11 7.0 1.6 11.5 7.0 1.5 12 7.0 1.4 12.5 7.0 1.3 13 7.0 1.3 13.5 7.0 1.2 14 7.0 1.1 14.5 7.0 1.0 15 7.0 1.0 Addendum on Use of Table 2 in a Reaulatorv Guide 11 174 Analysis Addendum on Use of Table 2 in a Reoulatorv Guide 174 Analvqis Regulatory Guide 1.174 suggests that a contribution to plant risk is "small" if (1) the contribution to plant CDF is no more than IE-6, and (2) the contribution to plant LERF risk is no more than lE-7. The probabilities in Table 2 cannot be used in to support a Regulatory Guide 1.174 risk analysis without first accounting for the likelihood of the ith tube having a leak now. Using only the sample information from Point Beach Unit l's latest inspection and, in Bayesian terms, assuming a "prior" uniform distribution between 0 and 1 on the probability that any one penetration would have a leak, it can be shown that the mean or expected value of the subject probability (now treated as a random variable) is (Martz and Waller, page 257),
(6) p= x+1 n1+2 where x = the number of leaks found in the inspections and n = the number of penetrations inspected. Using the same value (43) as before and setting x equal to zero, the estimated value for the probability that a given penetration would have a leak is 1/(43+2) = 0.022. If the latter is taken as the probability that a penetration will have a through wall circ leak of average size assumed in calculating Table 2 (i.e., 3 inches), then the unconditional probability that the ith penetration will have a critical circ leak by, say, 1.5 Target EFPY is 0.022*2.76E-3 = 6.14E-5, (where the 2.76E-3 comes from Table 2). One further note. The Regulatory Guide 1.174 criteria are expressed in terms of frequency of event per reactor year. The probability of the ith penetration leaking over multiple years must therefore be converted to an equivalent per year basis. References Bain, L. J., Statistical Analysis of Reliability and Life Testing Models, Marcel Dekker, Inc., 1978. Bamford, W. H., and D. Tang, "Structural Integrity Evaluation of Reactor Vessel Upper Head Penetration to Support Continued Operation: Point Beach Units 1 and 2," Westinghouse Proprietary document (WCAP-14000), Revision 1, September 2002. Cunningham, M. A., "Statistical Analysis of CRDM Sampling (Revision)", memo of August 17, 2001 to W. H. Bateman, Office of Nuclear Reactor Regulation, Nuclear Regulatory Commission. Kapur, K. C., and L. R. Lamberson, Reliability in Engineering Design, John Wiley and Sons, 1977. Martz, H. F., and R. A. Waller, Bayesian Reliability Analysis, Krieger Publishing Co., 1991. Tomes, C. A., "Probability of Not Detecting a Flaw in Unexamined Penetrations," email to Warren Bamford, September 30, 2002. U.S. Nuclear Regulatory Commission Regulatory Guide 1.174, "An Approach to Using PRA in Risk-Informed Decisions on Plant-Specific Changes to the Licensing Basis," July 1998.
ENCLOSURE 3 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Proprietary Authorization Letter, CAW-02-1559
Westinghouse Westinghouse Electric Company Nuclear Services P.O Box 355 Pittsburgh, Pennsylvania 15230-0355 USA U.S. Nuclear Regulatory Commission Directtel: (412) 374-5282 Document Control Desk Direct fax: (412) 374-4011 Washington, DC 20555-0001 e-mail: Sepplha@westinghouse.com Attention: Mr. G. Shukla Our ref: CAW-02-1559 October 11, 2002 APPLICATION FOR WITHHOLDING PROPRIETARY INFORMATION FROM PUBLIC DISCLOSURE
Subject:
Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations (Final - Proprietary Version);
Dear Mr. Shukla:
The proprietary information for which withholding is being requested in the above-referenced report is further identified in Affidavit CAW-02-1559 signed by the owner of the proprietary information, Westinghouse Electric Company LLC. The affidavit, which accompanies this letter, sets forth the basis on which the information may be withheld from public disclosure by the Commission and addresses with specificity the considerations listed in paragraph (b)(4) of 10 CFR Section 2.790 of the Commission's regulations. Accordingly, this letter authorizes the utilization of the accompanying Affidavit by Nuclear Management Company. Correspondence with respect to the proprietary aspects of the application for withholding or the Westinghouse affidavit should reference this letter, CAW-02-1559 and should be addressed to the undersigned. Very truly yours, H. A. Sepp, M nager Regulatory and Licensing Engineering Enclosures Cc: G. Shukla/NRR A BNFL Group company
ENCLOSURE 4 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Affidavit
CAW-02-1559 AFFIDAVIT COMMONWEALTH OF PENNSYLVANIA: ss COUNTY OF ALLEGHENY: Before me, the undersigned authority, personally appeared H. A. Sepp, who, being by me duly sworn according to law, deposes and says that he is authorized to execute this Affidavit on behalf of Westinghouse Electric Company LLC ("Westinghouse"), and that the averments of fact set forth in this Affidavit are true and correct to the best of his knowledge, information, and belief:
'a1 H. A. Sepp, Manager ........ Regulatory and Licensing Engineering 1'; ,git" Sworn to and subscribed before me this /1'.* day of ef ? ,2002 Notary Public Nota Sea]
Margaret L Gonano, Notary Pubric Monhvevile Boro, .Aeghe**y County My Comiso Exprem Jan. 3,2006 Member. Pennelivania Assodabn Of Notarfte
2 CAW-02-1559 (1) 1 am Manager, Regulat6ry and Licensing Engineering, in Nucleai- Services, Westinghouse Electric Company LLC ("Westinghouse"), and as such, I have been specifically delegated the function of reviewing the proprietary information sought to be withheld from public disclosure in connection with nuclear power plant licensing and rule making proceedings, and am authorized to apply for its withholding on behalf of the Westinghouse Electric Company LLC. (2) I am making this Affidavit in conformance with the provisions of 10CFR Section 2.790 of the Commission's regulations and in conjunction with the Westinghouse application for withholding accompanying this Affidavit. (3) I have personal knowledge of the criteria and procedures utilized by the Westinghouse Electric Company LLC in designating information as a trade secret, privileged or as confidential commercial or financial information. (4) Pursuant to the provisions of paragraph (b)(4) of Section 2.790 of the Commission's regulations, the following is furnished for consideration by the Commission in determining whether the information sought to be withheld from public disclosure should be withheld. (i) The information sought to be withheld from public disclosure is owned and has been held in confidence by Westinghouse. (ii) The information is of a type customarily held in confidence by Westinghouse and not customarily disclosed to the public. Westinghouse has a rational basis for determining the types of information customarily held in confidence by it and, in that connection, utilizes a system to determine when and whether to hold certain types of information in confidence. The application of that system and the substance of that system constitutes Westinghouse policy and provides the rational basis required. Under that system, information is held in confidence if it falls in one or more of several types, the release of which might result in the loss of an existing or potential competitive advantage, as follows: (a) The information reveals the distinguishing aspects of a process (or component, structure, tool, method, etc.) where prevention of its use by any of
3 CAW-02-1559 Westinghouse's competitors without license from Westinghouse constitutes a competitive economic advantage over other companies. (b) It consists of supporting data, including test data, relative to a process (or component, structure, tool, method, etc.), the application of which data secures a competitive economic advantage, e.g., by optimization or improved marketability. (c) Its use by a competitor would reduce his expenditure of resources or improve his competitive position in the design, manufacture, shipment, installation, assurance of quality, or licensing a similar product. (d) It reveals cost or price information, production capacities, budget levels, or commercial strategies of Westinghouse, its customers or suppliers. (e) It reveals aspects of past, present, or future Westinghouse or customer funded development plans and programs of potential commercial value to Westinghouse. (f) It contains patentable ideas, for which patent protection may be desirable. There are sound policy reasons behind the Westinghouse system which include the following: (a) The use of such information by Westinghouse gives Westinghouse a competitive advantage over its competitors. It is, therefore, withheld from disclosure to protect the Westinghouse competitive position. (b) It is information that is marketable in many ways. The extent to which such information is available to competitors diminishes the Westinghouse ability to sell products and services involving the use of the information. (c) Use by our competitor would put Westinghouse at a competitive disadvantage by reducing his expenditure of resources at our expense.
4 CAW-02-1559 (d) Each component of proprietary information pertinent to a particular competitive advantage is potentially as valuable as the total competitive advantage. If competitors acquire components of proprietary information, any one component may be the key to the entire puzzle, thereby depriving Westinghouse of a competitive advantage. (e) Unrestricted disclosure would jeopardize the position of prominence of Westinghouse in the world market, and thereby give a market advantage to the competition of those countries. (f) The Westinghouse capacity to invest corporate assets in research and development depends upon the success in obtaining and maintaining a competitive advantage. (iii) The information is being transmitted to the Commission in confidence and, under the provisions of 10CFR Section 2.790, it is to be received in confidence by the Commission. (iv) The information sought to be protected is not available in public sources or available information has not been previously employed in the same original manner or method to the best of our knowledge and belief. (v) The proprietary information sought to be withheld in this submittal is that which is appropriately marked in the report, "Probabilistic Analysis of the Safety Risk Associated with Point Beach Unit 1 Nuclear Plant's Unexamined CRDM Penetrations," (Proprietary), being transmitted by the Nuclear Management Company letter and Application for Withholding Proprietary Information from Public Disclosure, to the Document Control Desk, Attention Mr. G. Shukla. The proprietary information as submitted for use by Westinghouse Electric Company LLC for Point Beach Unit 1 is expected to be applicable for other licensee submittals in response to certain NRC requirements for justification of continued safe operation of Point Beach Unit 1. This information is part of that which will enable Westinghouse to: (a) Assess the risk with unexamined CRDM penetrations.
5 CAW-02-1559 (b) Assist the customer in obtaining NRC approval. Further this information has substantial commercial value as follows: (a) Westinghouse plans to sell the use of similar information to its customers for purposes of meeting NRC requirements for licensing documentation. (b) Westinghouse can sell support and defense of continued safe operation with the presence of cracks in a control rod drive head penetration. (c) The information requested to be withheld reveals the distinguishing aspects of a methodology which was developed by Westinghouse. Public disclosure of this proprietary information is likely to cause substantial harm to the competitive position of Westinghouse because it would enhance the ability of competitors to provide similar support documentation and licensing defense services for commercial power reactors without commensurate expenses. Also, public disclosure of the information would enable others to use the information to meet NRC requirements for licensing documentation without purchasing the right to use the information. The development of the technology described in part by the information is the result of applying the results of many years of experience in an intensive Westinghouse effort and the expenditure of a considerable sum of money. In order for competitors of Westinghouse to duplicate this information, similar technical programs would have to be performed and a significant manpower effort, having the requisite talent and experience, would have to be expended. Further the deponent sayeth not.
ENCLOSURE 5 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings Westinghouse Proprietary Information Notice
, C CAW-02-1559 PROPRIETARY INFORMATION NOTICE Transmitted herewith are proprietary and/or non-proprietary versions of documents furnished to the NRC in connection with requests for generic and/or plant-specific review and approval. In order to conform to the requirements of 10 CFR 2.790 of the Commission's regulations concerning the protection of proprietary information so submitted to the NRC, the information which is proprietary in the proprietary versions is contained within brackets, and where the proprietary information has been deleted in the non-proprietary versions, only the brackets remain (the information that was contained within the brackets in the proprietary versions having been deleted). The justification for claiming the information so designated as proprietary is indicated in both versions by means of lower case letters (a) through (f) located as a superscript immediately following the brackets enclosing each item of information being identified as proprietary or in the margin opposite such information. These lower case letters refer to the types of information Westinghouse customarily holds in confidence identified in Sections (4)(ii)(a) through (4)(ii)(f) of the affidavit accompanying this transmittal pursuant to 10 CFR 2.790(b)(1).
ENCLOSURE 6 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findin-qs Westinghouse Copyright Notice
CAW-02-1559 COPYRIGHT NOTICE The reports transmitted herewith each bear a Westinghouse copyright notice. The NRC is permitted to make the number of copies of the information contained in these reports which are necessary for its internal use in connection with generic and plant-specific reviews and approvals as well as the issuance, denial, amendment, transfer, renewal, modification, suspension, revocation, or violation of a license, permit, order, or regulation subject to the requirements of 10 CFR 2.790 regarding restrictions on public disclosure to the extent such information has been identified as proprietary by Westinghouse, copyright protection notwithstanding. With respect to the non-proprietary versions of these reports, the NRC is permitted to make the number of copies beyond those necessary for its internal use which are necessary in order to have one copy available for public viewing in the appropriate docket files in the public document room in Washington, DC and in local public document rooms as may be required by NRC regulations if the number of copies submitted is insufficient for this purpose. Copies made by the NRC must include the copyright notice in all instances and the proprietary notice if the original was identified as proprietary.
ENCLOSURE 7 To Letter from A. J. Cayia (NMC) To Document Control Desk (NRC) Thirty-day response to NRC Bulletins 2001-01, 2002-01, and 2002-02 for Reactor Vessel Head and Vessel Head Penetration Nozzle Inspection Findings "Point Beach Ul R27 Reactor Head CRDM Nozzle Ultrasonic Examination Report"
A FRAMATOME ANP 0 Point Beach Aý 7-I ftubqw October 5, 2002 Revision 0 Prepared by: Date: 10/5/02 M. W. Key, UT-Level IIISC
A FRAMATOME ANP Record of Revision Revision 0 Initial issue 2
A FRAMATOME ANP EXAMINATION
SUMMARY
Automated ultrasonic examinations of 49 CRDM nozzles and vent line nozzle were performed on the Point Beach Unit 1 Reactor Vessel Head. The examinations were conducted from beneath the head using the SUMO Rocky manipulator, USA Blade Tool, and Bottom Up Rotating Tool. Framatome ANP examination procedure 54-ISI 100-09, "Remote Ultrasonic Examination 'of Reactor Head Penetrations" was used to perform the examination that governs the remote automated contact ultrasonic examination of CRDM nozzles using the ACCUSONEXTM automated data acquisition and analysis system. The techniques utilized for this examination are intended for the detection and through wall (depth) sizing of axial and circumferential IDand OD initiating flaws greater than
.079" (2 mm) in the nozzle base metal only. In addition, leak path techniques were employed for the detection of fluid flow on the nozzle OD surface above the J-groove weld. Forward scatter (TOFD) longitudinal-wave and backward scatter shear wave techniques are used. The examinations were conducted from the bore of the CRDM nozzles from the bottom end of the nozzle up to a point nominally 2" above the uphill side of the nozzle J-groove weld.
The inspections consisted of scanning for axial and circumferential flaws within the nozzle. The bottom up tooling consisted of a transducer head that holds 10 individual search units. These search units were divided into two sets, one for the axial beam direction and one for the circumferential beam direction. The axial beam direction set of search units consisted of 5.0 MHz, longitudinal wave forward scatter time of flight search units with angles of 300 and 450; backward scatter pulse echo, 2.25 MHz 600 shear wave search units; and a 5.0 MHz 00 search unit. The circumferential beam direction set of search units consisted of 5.0 MHz, longitudinal wave forward scatter time of flight search units with angles of 450, 550, and 650; backward scatter pulse echo, 2.25 MHz 600 shear wave search units; and a 5.0 MHz 00 search unit. Appendix A contains printouts for system setup, calibrations files and scan parameters. The USA Blade tooling consisted of a single Circ-blade probe designed to emit ultrasound along the long axis of the nozzle. The 'axial beam search unit consisted of 5.0Mhz, longitudinal wave forward scatter time of flight search unit with an inspection angle of 500. The detection of flaw indications is based upon the expected responses for each search unit and technique. The 00 transducer provides weld position information due to lack of backwall response in the region of the flaw. The forward scatter time of flight techniques provides flaw detection and sizing information. For the forward scatter transducers, flaw detection is identified by loss of signal response either from the lateral wave or backwall responses as well as detection of crack tip diffracted responses. The 600 shear wave transducer provides detection by means of corner trap responses between the flaw and nozzle surface and sizing with tip diffracted signals. 3
A FRAMATOME ANP The bottom-up tool was positioned with the "Z" axis (axial) zeroed at the bottom of the nozzle with the positive direction extending up into the nozzle. The 'Theta" (rotational) axis was zeroed at the downhill side of the nozzle J-groove weld with. the positive direction in the counter-clockwise direction while looking up from the bottom of the nozzle (Nozzle 1 was zeroed at vessel "W" axis which is inline with the vent line nozzle). The ultrasonic data is adjusted for individual transducer offsets in the transducer head to provide actual reflector location in the nozzle. Of the 49 nozzles examined, one nozzle (1) contained a recordable fabrication indication in the nozzle wall. In most nozzles, these indications were located predominately on the downside of the weld and identified by multiple transducers from both axial and circumferential beam directions. These indications were characterized as embedded volumetric fabrication flaws resulting from the J-groove welding process. See Fiqure 1 for reporting criteria for fusion zone indications. The examination of the remaining 48 nozzles and vent line did not reveal any recordable indications. However, it was noted on the examination data sheets that fabrication type flaws were detected at the nozzle/J-groove weld fusion zone with no penetration into the nozzle. All nozzles with the exception of #26, #27, #28 and #30 received 100% coverage for the areas requiring examination as defined by the governing procedure (54-ISI-100-9). The nozzles with limited scan coverage are as follows: Circ .. Axial :ExaminationPercentage Nozzl A rea Leth Lrt7.478 26 Area of Interest 0-3600 0 -6.56" Area Examined 0-2170 0-6.6" Area Not Examined 218-3060 0-6.5" Area Examined 307-3600 0-6.6" / 4
A FRAMATOME ANP @6
.,..-'>Circ "Exkamination6Percentagez Nozzle ."Area' 'Length. 'AkiiaLength___________
0,0 27 Area of Interest 0-3600 0 -6.56" Area Examined 0-1730 0-8.7" Area Not Examined 174-2050 0-6.5" Area Examined 206-2100 0-8.7" Area Not Examined 211-236° 0-6.56", Area Examined 237-263' 0-8.7" Area Not Examined 264-332o 0-6.56" Area Examined 333-3600 0-8.7"
-~ ~~: .Cic,: Aklal; 'Examination,Percentae
'Nozzle ;ýAiea, <Leth -Lengthr -52%0 28 Area of Interest 0-3600 0 -6.56" Area Examined 0-89* 0-8.6" Area Not Examined 90-2610 0-6.56" Area Examined 262-3600 0-8.6" 2' go "gT..
Examination Percentage Na Axial Length' 50 30 Area of Interest 0-360° 0 -6.56" °,., Area Examined 0-890 0-8.6" Area Not Examined 90-1300 0-6.56" Area Examined 131-2390 0-8.6" 2"tO O.W. Area Not Examined 240-3600 0-6.56" 5
A FRAMATOM E ANP SYSTEM CALIBRATION The ultrasonic system consists of the essential equipment required to perform the examinations. The equipment for the CRDM examinations is made up of ultrasonic equipment that must be calibrated in order to provide a 'time base and amplitude response traceable to a known reference standard. The system consists of the R/D Tech pTomo, remote pulser, transducers, interconnecting cables, and the acquisition and analysis software. i Prior to the examinations, the system is calibrated using the appropriate equipment. The equipment considered as essential variables used for each examination is documented on the examination data sheet. The calibrations are established by entering transducer/application specific parameters into the acquisition program calibration setup. A dynamic scan of the calibration block is performed with the pre-established parameters. The data analyst evaluates the data from the calibration block and makes the necessary adjustments in the acquisition calibration setup to provide an accurate system calibration. Once the adjustments are made, an additional scan of the calibration block is performed, which becomes the system initial calibration. The procedure requires intermediate calibration checks to be performed periodically throughout the examinations. At the discretion of the analyst, the intervals between the calibration checks may be extended based upon continued satisfactory performance of the system. This is verified by observing the characteristics of the transducers during the examinations. The lateral wave of the TOFD transducers, the backwall responses for either the shear or longitudinal wave components of the transducers, and the signal to noise levels are used to make this evaluation. During the course of the examinations of the Midland Replacement Head CRDM nozzles, which spanned a 13-day period, the performance of each transducer was monitored during acquisition and verified by the analyst following completion of scanning of each nozzle. No system degradation was observed during the examination period, thus intermediate calibration checks were not performed. The requirement is more for security in reducing the amount of lost data if the system calibration is compromised, rather than a technical basis. A dynamic scan of the calibration block serves as the final calibration at the end of the series of examinations. The data file identification provides a date and time stamp identifying when each data acquisition is started. This time is used for tracking of the calibrations and examinations. The file designation is broken down into the following: F2179_07.52.33 Hour, minute, second Day of the year, in this case the 179th day (06/28) Year 2002 6
A FRAMATOME ANP Reporting Criteria for Fusion Zone Indications Closure Head 0.060" Nom. Weld Dilution Zone "IJ-grooveWeld CRDM Nozzle Indications detected within 0.060" of the tube OD in the weld region are reported as weld fabrication flaws in the weld. Indications greater than 0.060" from the tube OD in the region of the weld are considered recordable conditions and are reported separately on the data sheets. Those indications that are observed at depths greater than 0.060" from the tube OD are characterized as embedded volumetric weld fabrication flaws resulting from excessive localized dilution into the tube wall where slag was entrapped. Figure 1 7
A F RAMATOME ANP APPENDIX A SYSTEM SETUP. CALIBRATION RECORDS. SCAN PARAMETERS Circ Blade ProbeRecords: 8
A FRAMATOME ANP Circ Blade Probe (continued): 9
A FRAMATOME ANP I . Rotating Probe Records (ChI to 6): 10
A FRAMATOME ANP Rotating Probe (Chl to 6) (continued): 11
A FRAMATOME ANP Rotating Probe (ChI to 6) (continued): 12
A FRAMATOME ANP I Rotating Probe (ChI to 6) (continued): 13
A FRAMATOME ANP I f Rotating Probe Records (Chl to 4): 14
A FRAMATOME ANP I Rotating Probe (Chl to 4) (continued): 15
A FRAMATOME ANP Rotating Probe (Chl to 4) (continued): 4 Channel 3 not used 16
A FRAMATOMEANP Vent Line Probe Records (Chl to 5): 17
A I FRAMATOME ANP I . Vent Line Probe (Chl to 5) (continued): 18
A FRAMATOME ANP Vent Line Probe (Chl to 5) (continued): 19
L404 Q)Ii~4 ~ tI I ii-i
-e
'k, Status Summary of PBNP Unit I RV He "RDM
--,4 --
Inspections li9... _ ,_a.. -l 'O ,,. I- " .1 Zt-Pen Visual Examination PT Examination UT Examination Leak Path Source of Leak
# - - Examination 26 , iJ I Sus Lim Report NA I Report NI I- 2i Li e;'.I*Report
, _____ * ' NI II- AA0""' Lim " Report "°" NA Identified Report 27 N I . _,_ - t Al'qz c 0T (' __._.,_"_"_
29 ___ - ._.-_ / y 30 -_
' ~
~1~ , _
~ __
4 17--_ 12.4-- fr* -4' _ _ _ 31 33 32-- , A -l-14q _ -~-_ A _ _ _ 34 - -c--
-* -T,, A 't S 35 ____ ___ /t e7 It0")
6 pe 36 37 1 - - _.,, ..0..,o
. i/...4ti 38 -v!
*, I, Y_"__-
39 ii - 17
":1.127F, 40_
41 ,
"Z-LVr,1 -_
a~v2U7 42 - -- - - - ( _ 43 I 44 JA 9k ,_
" *- 'a*r P_ .- - *
'Af, ua..
4 46 47 - - I 16 A0.0' ."7. 48 - -ae1 b/, 7;,.1-. "_ VL 49 - - -I - -% I z I_ ifZ4C...- & ?o6, 191,, . c
, 11 __ _ _ _ _ _
DI T~L :-IIdI i U ra ao eAN rpos ilt ak_ 101 1)llt~L UlIoxe; Pramatome ANt' responsibility C- 110. Ck- I kc Ak * ?oTA-nP& P9o6i5 L ,C A;* ;r*-1 t, R e,-X M A -
PBNP Unit 1 RV Head CRDM Flaw Evaluation Data Pen Orientation of Flaw Location of Flaw Vertical Circ Location gf Pen Actual Flaw Sizing Source Ind ID 0 Location of Flaw Flaw Row Thick- Figure axial I circ bot ID OD_ Sub W BW WA Uphill Downhill ness A/L Depth Length Liga I I h I ratio ment A B C D E F G H I J K L M _ I I1 REFER TO Framatome ANP SPREADSHEET\,FOR DATA LOCATIONS ITEMS F, L, AND M ARE NtiriO; DATA ENTRY LOCATIONS
A FRAMATeMIA AtjIF CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: A Procedure: 54-1S1-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): End of Noz. (in.): Probe Serial No.'s: Ch i Ch 6 n/a A*I'. ati'. t6-- Ch2 n/a Ch7 - n/a 451, / , f' 3' Ch 3 f/a Ch 8 n/a Circ. Scan Start: jdeg @L J" Stop: [ Jdeg @L " Stop: Ch4 n/a Ch9 n/a Flies: Cal Block SIN: Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 C D E D E -_- - I H B _ 2
-3 -4 -5 -6 7
8 9
'10 11 12 13 14 15 16 17 Data Loc, 0 30 60 90 120 150 ISO 210 240 "270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 1240 270 300 330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. IInches MIN. Inches Comments: Measured Thickness:l G (*theta of degl with an axial position of Limited Scan? (IYN):I Analyzed by: Date: Analyzed by: Date:
9/21/0212:29 PM Data Sheet - Blade Page I of 2
A PRAMATOMC ANP Nozzle Profile DEK 15.0 I I I I I 14.5 ------ - - 4 lt
-. 7 14.0 -------- -- -------- ------------------- -7 ,
- 13. -~,;
-- --- ---------- ---------------- 44 4 13.0 ------------------ ------------------ ------------------
12.5 4----*4-4---4-4
- ----------------- 4
. 4..
4.444 j... ....... 44%-- Uphill
- , 11 '- I I -I 12.0 .4 44- -- -- -- ---------------- ------------------ Side 11.5 ------------------ ------------------ ------------------
4Z--- -4 - 444 . .4- - - - 11.0 ------------------ ------------------ ------------------ - --- 4---- - 4- .- -- - - - 4 -- - 10.5 ------------------ ------------------ ------------------ 4 4 -- 44--- -- 4 10.0 ------------------- ------------------ ---------- ------
--- -- 44---
-- -j ------ -
9.5 ------------------ ------------------ ---------- ...... 9.0 ------------------ ------------------ ------------------ 8.5 ------------------- ------------------ ------------------ In 0 8.0 ------------------ ------------------ ------------------ 7.5 ------------------ ------------------ ------------------ 7.0 ------------------ ------------------ ------------------ 6.5 4. 5 . . ... ------------------- ------------------- ------------------ 6.0 -- - - --- - - - ---
------------------- ------------------- ------------------ 44 4 .. 4 4 5.5 ------------------- ------------------ ------------------
5.0 *------------ ------------------- ------------------ ------------------ - - 4--- - - 4. *47 4' 4---.--- 4.5 -- - -- 4-r 4
-44 p 4
- - '4 444J' 4--.
'--j-j-4 4.0 j--
3.5 -- I 3.0 --vt' -- --- 4 ------------------- ------------------ ------------------ 4.444 44 44, --- 4 t.-- - -- - -- - Downhill 2.5 ----------------- ------------------ ------------------ ----
---- --- 7".,-
2.0 ---------- ------------------- ------------------ Side 1.5 ---- --- --- ------------- 1.0 ----------- 0.5 7 7 7, 0.0 . -... .- I, . m-. I-mm 4kkimlm . . 0 50 100 150 200 250 300 350 Degrees I -2 3 -4
-5 -6 -7 .8
-9 -10 11 -12
-13 ------- 14 15 -- 16 inNoz. End -11 "um-v Uphill / Downhill demarcation 12:40 PM9121/02 Data Sheet - Blade Chart 1 Page 2 of 2 1%
FRAMATOCME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 I / ' PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 r 1Reactor Head Penetration
;:RA,&MAZ0MZ .AAM Ultrasonic Examination D.ata Sheet Customer: NMC L[Plant: 8b1' B,,, l Unit:
Penetration No.: / ' Procedure: ' Equipment: Description VH# Cal. Due Date SN# gTomoscan 2z-/ 7o -n 16 Channel PiR I/N ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3-5 9 Cable Len th: 5o0 Type: iRL- I- # Intermediate Connectors: I Calibration Block: & p1//1q3v, Calibration Setup: A21'7 3
,if-7 ? 4 -
A. q qu. I, 51.
-Scan File No.: Initial Calibration File: A 4Z.
A z /L/ 5Y. 5-%I Final Calibration File: 42Z*3JL' ,,".qt Scan Start: Z = -3.t, "Scan Start: 0 =- Scan Stop: Z = /t--.//`Scan Stop: 0 ='" Index Increment: 30 Channel An le Serial No. Comments
/ 6' . 3 oq0W Z 3-3 .. 5zoZ -roF D 3 &oI0 35c0lo 4I"L,5'f I -- O,¢z
&,Cr36 1 S15& i¶'
& 0*6 36052-.
7WQ? 35101 1-D~
"` ( z) . o-S" "5"+0 Results: No Recordable Indication*s Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: / / ,Date: Reviewed by: Level: Date: -z TYPICAL DATA SHEET FIGURE 5 ;, roIAvl/ Page 31 of 32
0 A CROM NozzlA
.. - *. 1Iltrnnir
.... FY2min2finn 4**U fl2f2 4LL4 haaf 55h Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 " Nozzle: -I Procedure: 54-ISi-100-09 INozzle Dimensions: (is.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch 1 35044 Ch 6 35052
- i-'t ?A; e ,-Stb p: 01,, , ,..'S~ tui:I ." Ch2 35202 Ch7 35202 4$-,* *,Ch 3 35070 Ch8 35070 Circ. Scan Start:L[ sJdeg @1 -3.6 " stop:I 365 Ideg @1 1641j' Setup: 1* Ch4 35044 Ch9 not active Files: A2273_14.54.39 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 35048 Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI -
2 3 4
-6 7
9 10 11 12 13 14 15 18 17
-w Data Loc. 0 30 60 90 120 150 180 210 240 270 1300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 1.50 180 1 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 _ 0.00 0.00 ...0.00 0.00 0.00
_ _ 0.00 Inches MAX. 2 87 2.71 2.78 2.75 2.82 2.83 2.80 2.79 2.81 2.82 2.74 2.80 2 80 Inches MIN. 1.66 1.59 1.57 1.57 1.57 1.58 1.55 1.3 1.58 1 61 1.62 1.64 1.59 Inches Comments: Measured Thickness:, 0,625 @theta of 2*0'31 dogewith an axial position of 1.041 Limited Scan? (YIN): n '6 degjree data position aligns with 0 or W axis &Venthine Analyzed by: ,,, Date: /*;O ...... Analyzed by: "/,q/ Date: "/*,I 10/31021:04 PM Nozz 1 rotating 10131021:04~~~~~h PMNz ZoaigPg Page I of 2 f
N7 ZJ1 Z ? 6 ed I. 1IMtD 6ulleloi I- flO' ZOICIOLýV'Jd 6Z:Lý 4 Nq vi-R
~'~,t" 3~a:!a-~
3'-4a- g". i"- .9991 ea~ai13~ 3 ' aaa~~a~~a~a4. 4 ~~~ aa K O~iO aa ~.t'aa a't ~33' a-3- a#a3aa3aaaaa; ~ "'~ p
.Va~-
O 3 aaa~a?
-:4~09 me i I (a .3, a) Aaa- a-s a a 3'a a - a aa- 4 'a a-' a3' a a-3
-a a- ------ ---
,' aaa-a'A 3
3 3' ' t'- ia3/4g.3aa a3¶aa-;4j'aa ada-' ta a a. 4-jaka - a- ca--"
-' r 'C -' a-a a3a'Z7' a a<a apaaa., afaa Yaaaa a a
,4rSaba a a a-a a-3'a,.3 -4 a--
a 3
-faa' *a3 a a /cta .3 - 'ta.' 3' -- - - -
-- ' aa
---- -- r --- a- I. 3 a a a a3 a a aa- - 'a 'a-a,- a aa aa 3' a aaa ,Uaaaaa-p
'a- a -" - a-a. a '3 a33 Va a3
,-aa ta-a-a ZaaŽa aa3< 9'kat S-- ---- ---------- ------ -- ------ - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ---
- a aaaa aa a
- a, a-a' 3 " a- 3i a a-- a-- a-- a
- ------------- a S07 a-a a a a - - -a--a -a-- -
a -----a ------ a ; ...... 4
----- -a -- --- - -- a a a a a --a-- - --a ----
a a.3 a -
- 4. 97o'
------------------ - W
-tt--- - -- -
a-a------------- -939
-a -- ' -a -- -- -
- a'-- -- a-- ------------------
a aa a- -- a--
-- ajc
-- --- ýa
------- 3- a--- - - - - - -
-- a.;-- --
a-a-
~ -------
--' ---aa --
3a) -- a
$a
-- 4'--
.A
---------- -- - 1/2-a' yaaaa'a 3+/-,a' -- a--
a a- a-3'-- a a--
- a-- a-a-a--
G'9 3' a - a a.. - -- -
------------------ -a- - - - - - - -
-- a-43 -- a--- a---A 7 ---
a'-- t---a aa3 -- -- a--
- :7-7 - -- - - - -- - - - - -- - a----- - - --
--- - --- - a - -a - - a-.-
-- a---
-- a-a-- - -9's
'a --- t aa~~aa-ta I I. -"' -%8a.
- a a -- 3 a-a - --------- a a -
a
~t..
aya-aa a' p 4 a- a a a -a. ' --a I
~daa-'GIZZOa.a-aa'aa g~ a 3"(a3'a' 44p a'
.a3aa
~a a$4 a-3( W a-lat.X1/4~M~aa3'~aW~-aaa.~a-~d-fl aa-a&aaaaaWa-ra, cia.
33,'4,a.3- aa-t-a 4 3 faa'- ~aaa - .a-Ja 7*~'a-a' g a
- aaat" 3ta~pa-~aaj~a
-IIO
<-;Q)a
,alO~
-4 a~ a a
.a'9 3
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE ELA-Z. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 S~Reactor Head Penetration F;A-Ar ZMAN*P Ultrasonic Examination Data Sheet customer: WJ trC Plant: Ko*- P-)e*e,.- Unit: Penetration No.: Procedure: Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " q 2 z//o 16 Channel P/R N/A 1A ACCUSONEXI Data Acquisition Software: Version 6.2.5 ACCUSONEX mData Analysis Software: Version3 3.1B Cable Length: so' Type: 2e.- t--q # Intermediate Connectors: I Calibration Block: (,,o//q306o1 Calibration Setup: 4Scan File No.:. Initial Calibration File: /ZZc," .L.z6.q
.'3L q4zz.cV? 09. DO.q8 Final Calibration File: C,,-jU %A't,,M .
Scan Start: Z = r-O.- Scan Start:0= -5 Scan Stop: Z= 43 Scan Stop: 0 ='*3., Index Increment: 30 Channel Angle Serial No. Comments I 5-J. o50420c/14 Results: No Recordable Indications Leak Path Detected Axial Flaws Detecte Circumferential Flaws Detected Comments: Analyzed 15y: :_Level: Date: / H!z [Reviewed b : *_.. Level: 2 Date: a/D/- TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
7 P,A4,5'T A CRDM Nozzle Ultrannk Eyminafinn fl2t2 hacf Customer: Nuclear Management Cor poration Plant: Point Beach Unit: 1 Nozzle: I Procedure: 54-ISI-100-09 Nozzle Dimensions: (ph.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (del.): 0 End of Noz, (in.): 0.26 Probe Serial No.'s: Ch i S0420CN Ch 6 n/a CirX. Scan
,t Start:l__ de -0.7 " Stop:I 4.3 Ideg I -385' Setup:[.3 Ch4 n/a Ch9 n/a Files: A2267_08.00.48 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adiusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) . (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I OD 0.37 1.4 2080 1.9 209.0 0.46 208.0 209.0 0.03 0.46 4 0.25 0.54 AXIAL 1.9 2.7 2 OD 052 1.6 80.0 1.8 820 0.18 80.0 82.0 0.07 -0.19 21 0.10 - 0.54 AXIAL 1.8 2.6 3 OD 051 2.3 1040 1.6 1050 0.70 104.0 105.0 0.03 0.70 3 0.12 0.17 AXIAL 1.8 2.6 4 OD 0.43 1.4 144.0 1.8 144.0 0.39 144.0 144.0 0.00 0.39 0 0.19 0.49 AXIAL 1.8 2.7 5 OD 0.55 1.6 166.0 1.8 166.0 0.23 166.0 166.0 0.00 0.23 0 0.08 0.33 AXIAL 1.9 2_6 6 OD 0.53 1.3 188.0 1.8 1880 0.52 188.0 188.0 0.00 0.52 0 0.10 0.19 AXIAL 1.9 2.7 7 OD 0.55 1.7 2880 1 1.8 - 2880 0.10 288.0 288.0 0.00 0.10 0 0.08 0.76- AXIAL 1.8 2.8 8 OD 045 1.7 3350 2.7 335.0 0.98 335.0 335.0 0.00 0.98 0 C.18 0.18 AXIAL 1.9 2.8 9 OD 0.58 2.5 229.0 1.5 231.0 1.00 229.0 231.0 0.07 1.00 4 0.05 0.05 AXIAL 10 1.9 2.8_
11 ____ ____ ___ 12 13 14 15 16 17 Data Loc. 0 30 .60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 Inches MAX. 2.85 2.83 2.82 2.79 2.78 2.80 2.86 2 87 2.88 283 2.82 2 86 2.85 Inches
,MIN. 1.80 1.72 1.72 1.75 1.74 1.75 1.80 1.80 1.82 1.84 1.87 1.90 1.80 Inches Comments: Measured Thickness: 0.628 @theta of 233 deg with an axial position of 1.11 Limited Scan? (YIN): y 074=1103 Indication at root of weld. Depth from ID0 587" Z extent 2.26" to 3.03" theta extent 12 to 28 deg center location z=2.79" theta=22 deg 0 degree data position aligns with 0 or W axis Limitation - No leak path call. Required distance above weld 2.0" (paragraph 6 3) Distance above weld is 1 61".
No Limitation - Area of Interest above weld for crack detection is 1.0" (paragraph 6.2 of procedure). Analyzed by: Ij /I Date: L/2A- Analyzed by: /V/,9- Date: A$'9 9/24/024:24 PM Nozz 1 Page I of 2
Z Jo Z e6ed I. WJ40Q I. ZZON ZO/1lI6V'Jd £tZ:t7 LcIt't uol;lewewep IA!quMoO I I!qdn,,,,,, S,1 LL_____ L;"--- -- 44,4z '- 2 . . . /
.1. 1-I-
454.-,. -- ---- 4 4.
.44444 .,4' 1'*' ---- - -- -- - --
- 4 44 l i i I i
-- --. -- --- ---- ---- -s--
L " -ý
-- --7 --------
--- 1 --- 7 -- 4 07 oT I------------------ ------------------
I f-g. f ...................
- O' f ................... - 9'P7
------------------ C")
- . . . .. . . . . . . . . . . . . . . ------------------ - o0 0
"-----------"... ... -- - --- -- I--
-gu F-'" " -----.....-- ------------------
"- 0"9
-- - - l. . . . .. . . .. ... .
------------------ --- =1
- *4
.1-. . . . . . . . . ------- -- --- ---- 44
- '6 '1
.. .. 4--.. .. .. .. -- -- ' -- - - U9----- 9.9 7, --.
- -- -- - $45
,.4
't8A,9 VW-Z -4. dNV3nO+/-*4VthJ
o 4 A PRAMATOM E ANP CRDM Nozzle Ultrasonic Examination Dlata 5nhpaf Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: I Procedure: 54-ISI-100-09 Nozzle Dimensions: (1*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch I S0379CN Ch 8 Axi alS?. n/a IA,.;Stohl "t . * *.deg . ? - k Ch2n/ Axia$~.StbgL; 1,4 .Setupl;~ Ch n/a 4 .. ____.. Ch7na Circ. Scan Start:[1 -deg .ah 3 nla Chn
@1 -0.7 1 Stop:1 365 Ideg @1 31' Setup:1 3 Ch4 n/a Ch9 n/a Files: A2269 19.09 461A2267 08.00.04 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted CIrc. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (dog.) (in.) (dog.) (deg.) (in.) (in.) (dog.) (in.) Ratio Orientation Min Max 1 OD 0.56 1.7 00 2.1 00 0.40 0.0 0.0 0.00 IT 0.40 0 0.06 0.16 AXIAL 2 OD 0.55 1.8 21.0 2.9 21.0 1.10 21.0 1.6 3.1 21.0 0.00 1.10 0 0.08 0.07 AXIAL 1.6 3.1 3 OD 0.51 18 750 2.5 750 0.69 75.0 75.0 0.00 0.69 0 0.12 0.17 AXIAL 1.6 2.9 4 OD 0.59 1.8 88.0 26 88.0 0.81 88.0 88.0 0.00 0.81 0 0.04 0.04 AXIAL 1.6 3.0 5 OD 0.51 1.8 1330 2.7 1330 0.90 133.0 133.0 0.00 0.90 0 0.12 0.13 AXIAL 1.6 30 6 OD 0.48 1.8 150.0 28 1500 1.00 150.0 150.0 0.00 1.00 0 0.15 0.15 AXIAL 1.6 3.1 7 OD 044 1.8 234 0 1, 2.5 234.0 0.70 234.0 234.0 0.00 0.70 0 0.19 0.26 AXIAL 1.6 2.9 8 OD 0.46 1.8 255.0 2.5 2550 0.70 255.0 255.0 0.00 0.70 0 0.17 0.24 AXIAL 1.6 2.9 9 OD 0.52 1.8 2750 2.4 275.0 0.56 275.0 275.0 0.00 0.56 0 0.11 0.19 AXIAL 1.6 3.0 10 OD 0.32 1.6 2920 2.5 292.0 0.89 292.0 292.0 0.00 0.89 0 0.31 0.34 AXIAL 1.6 3.0 11 OD 047 1.7 316.0 2.3 3160 0.63 316.0 316.0 0.00 0.63 0 0.16 0.25 AXIAL 1.6 2.8 12 OD 0.47 1.8 3370 2.5 337.0 0.74 337.0 337.0 0.00 0.74 0 0.16 0.21 AXIAL 1.6 3.0 13 14 15 16------
17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz.Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 3.01 305 320 3.20 3.10 3.05 3.11 301 320 330 3.10 3.05 305 Inches MIN. 1.51 1.56 1.56 1.56 1.56 1.51 1.56 1.51 1.66 1.56 1.56 1.51 1.56 Inches Comments: Measured Thickness: 0.625 @ theta of 65 dog with an axial position of 0.931 Limited Scan? (YIN): y am.-'*=* ,,*m All flaws dimensionalý intersect with the wetted surface of the weld filet LImitation - No leak path call. Required distance above weld 2.0" (paragraph 6.3) Distance above weld is 161'. No Lim itatlon - Area of interest above weld for crack detection is 1.0" (paragraph 6.2 of procedure). Analyzed by: - Date: - Analyzed by: Date: 1v 9/29/0210.48 AM Nozz I FINAL Page 1 of 2 c~c~ed b
Plprti Z1 Zeieed 1.12840 1IVNIdI J.flOf EOI6ZI6V'V 817:%. L-PUW ZON- 9L --- 9L--t U
- UL-- LLý-OL-- -- G- 9-t-9-V- 'S- i z
99
' t I
,.~a
,.',O'
~ a a"
- a. a0/
mi
* - )2. Oa,aja.aI
-t a pa' laiaa 'at'" - a- a' ' aa aaa
- . ,' a,, a,a ,&,
- ------- a-.- -- a a pa I.' 'a aa. '-.
aa a.) 'a.aa'a
,.. a aaaa'a4Uaaa4aaa a-,.) aaaxara 'ta"; -
-7,4. -
a 4. ,a,aa ya
------------ ----- ------- .9. I 4 a Ca; I. I
----------------- , a.77 a' A - 'a- ,a---
lit:; at--a: 97;
-- '-a ----- -' -- -- -- -------------------
'a' K --- 'a, a-V-- a ----
a -- ----- ---- ---- -- a a aSP' --. a--- -
----- -- -- -- - 4-------
-- ---- -- -- -- - a . --(a-- --
--a. -- - -- - alat.--- --
---- aa-a.---y--- -------------------
-STC laaa-,a----.a- a
-- - - --- -OaT
-N- - - ~
a
------------------- -- aa a'--,----- a -a' G'9
- 'a.' --- . --- ---
------------------- --- aa---- --t ---. -a
-- a--- --- a
-- - a--- ---.
A- ---------------- a -- - - - -- - - - a'... a- -, - -- -OL a a
-- a----- --- a ;Aa ---- %N t
----- s--
a t~ Ia
--------- a --
t
------------- I----- It ---
- -- -- - - - - .. ataay-a Aa-.--- -a-2 aa, .axaal k-a-tc aaa--a---,taaf a 4 --
f---------- ----------------- a a, - - - - - - - - a-.-
--a- -- --
a - -~- - - - a- -a -- - £--
,a.,aaa.. aa.-- --------------
-6T 2'ý I I
'IdNV aY
POINT BEACH NUCLEAR PLANT LIQUID PENETRANT EXAMINATION RECORD Component ID: Component
Description:
Site / Proj'-ict: Page I of 3 RPV CRDMfNozzleNgumber I I Sheet Number or Work Order Number. 4S10003 PBNPlI R27 ISO Number: NDE Procedure Number / Revision: I Surface Condition N/A NDE-451 Rev. 20 TCN2002-0539 E AS-Welded []Ground E3 Machined Cl Other: xaminer(s) / Level / Date (Print):
.:A.JENSEN III 09-25-02 Temperature Device Manufacturer: FLUKE MT&E Number: MCDP-012 L. Location: _ W. Location:
Calibration Due Date 12-03-02 Surface Temp.: 72.4 0 F J'essel 0 Edge of Weld PENETRANT MATERIALS PRE-CLEANER PENETRANT RkMOVER Manufacturer/Brand: Ifet-L-Chek Manufacturer/Brand: Met-L-Chek DEVELOPER Manufacturer/Brand.AMet-L-Chek Type: E-59A Type: P'P-31A Manufacturer/Brand: ifet-L-Chek Type: E-59A Batch Number: 3930 Batch Number: 2654 Type: D-70 Batch Number: 3930 Drying Time: 2 mhh,. Dwell Time: 30 min. Batch Number: 4151 Drying Time: 2 mni. Dw~ell Time: 30 reIn. Indication No. L Location W Location Dwell Time: 30 mm. Upstream or Downstream - Round or Linear i Size Rernark* 1 Appx. 140 Deg. 1/4 in. N/I Linear 5/64 Indicatlon is light.Appx. 1 1/4 in. from bottom oftube Additional Remarks: See attachedphoto and sketch. .4 , & ,YOC4 -Oo-? / gt 0 , Limitations- If None, so State: NONE Examiner(s) / Level / Date (Signature): Revieyer I Level / Date: ( Oq-* 4 tt, ANII Review / Date: El N/A
/
/ 02 _Z _6_
i Form NDE 450.1 Revision 13 08/,15/01
QL 4w
.I View From Below 4' 5%
Indication #1 appx. this location 2700 (Stud 37)
1.. FRAMATOME-ANP RemoteUltrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-I, 54-PQ-i 00-2,.3, 4 and 5I A"Reactor Head Penetration tPRAM ,TaC ANP Ultrasonic Examination Data Sheet Customer: N,.Ma [Plant: B,*k, Unit: Penetration No.: 7- Procedure: 5- ISi- tO-"*'* Equipment: Description VH# Cal. Due Date SN# p.Tomoscan ' "1//o3 =.Z;q 16 Channel P/R N/A 1A ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3 3.25 Cable Length: Sol Type: !e'-i-4-q # Intermediate Connectors: 1 Calibration Block: o//q.o-/ Calibration Setup:
"Scan File No.: Initial Calibration File: Zt,-'. "2.09 A z7Z4-.7- 5".zZl-. Final Calibration File: cow 2 ., juep p -A Scan Start: Z - -.. Scan Start: 6 = -" Scan Stop: Z = (...- Scan Stop: 0 =3G"5 Index Increment: 3 ° Channel Angle Serial No. Comments
/ 5"o'1.. So 3Gl cN Results: JC-No Recordable ndication Leak Path Detected Axial Flaws Detected- Circumferential Flaws Detected Comments:
Anal ed bY: ,,_ evel: *Date: /,. 0. Reviewed by: i2~ QLevel: Z Date: /2~ TYPICAL DATA SHEET FIGURE 5 fýC(\4A 1l1 Page 31 of 32
A RAMATtA F N: CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 2 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iA.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg[.): 140 End of Noz. (in.): 0.58 Probe Serial No.'s: Ch I S0381CN Ch 6 nla a n , t , , , Idea :I Setup1, e-op.- ..- Ch2 n/a Ch7 n/a SCh3 n/a Ch8 n/a Circ. Scan Start:L.5 deg @1 -0.7 1" Stop:IL 365 Ideg @1 6.78 Setup: 3 Ch4 n/a Ch9 n/a Files: A2267 17.53.20 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 1 NRI
-2 -3 -4 -5 6
7 ; 8 9 10 11 12 13 14 15 16 5* __ _ _ _ _ _ __ _ _ _ _ _ _ __ _ _ _ _ _ __ _ __ _ _ _ D ate___ 17Data Loc. 140 170 200 230 260 290 320 350 20 50 80 110 140 Degrees ' WELD Noz. Loc. 0 30 160 90 120 1150 180 210 240 270 300 330 360 IDeglrees POLE Noz. End 0.58' 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 Inches PRFL MAX, 3.15 3 31 3 49 3 93 4.31 4.57 14.61 4.55 4.37 4.09 3.73 3.45 3.15 Inches IMIN. 1.87 1 87 1.95 2.45 2.99 3,35 13.47 3,41 3.09 2.75 2 27 1.93 1.87 Inches Comments: Measured Tickness: 0 619 @ theta of 161 _deg with an axial position of 5.19 Limited Scan? (YIN): I N Analyzed by: * *Date: ... , t,...
-,0Z.- Analyzed by: 7Dae U *
(6) 91241027:50 PM Nozz 2 page I of 2
". Nozzle 2Profli4,'.:
FRAMATOM, ANP, :- -. ' . - . -" "
*. . ... .. 1'. ..- *o'
14 5 ..---- -- , 4 ---
,--'.'..* * *. -.. - -- -----...- -. '-I. ------
4-0 2 ---------- -1 ---- 7-- -- --.-.... . . - ----- 13.50 .. ... . . . . . . . . . . . . . . . . . . . . . . . . . -- . . -. -- - --- - ---I........ . . . . . . 12.5 :- ......... . . . .. . . . . . .. 11 0.. ...........------------- -------------------. -------------------..-------------------.-------------------.--------------------. 10 .15 ..........------------- ..------------------ ..------------------..------------------..------------------. .------------------ 10.0 10.5 --------------------------------------- ------------------- -------------------------------------- 9.0 ------------------------------------- ------------------- --------------------------------------- ------------------- 8.5 -------------------------------------- ------------------- 7.0 - 6.0 -. -------------------. -------------------. -------------------. -------------------.-------------------.------------------- ------------------- 7.0 3.57 ---
--.................................. V ................................. ................................. -----------------
3 .0 . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . .. .. . . . . .. . . . -.- -.--.. 5.5 " - -
- pL3ugamwmnagMv,aPiv
-,------ ------ . ----------.I.----, *.* * -z- ------ .......... . I.. -. * .
M ~Tiiu
. 43M....
4.0 3.0 - ljj3Al~~ iiidl~ . Downhill, h.. -- 0.0 0.5
- -------- -- y ,,-----. .. . ,, , *, ,', ,* S 0.5 6l _111I .. "ý, , ý Jt,-Y -- iVt ý 2.0. '::-,'. .'..100 .:.:i* "* 15 1.. fl,, ,A,, ; -, 200. . . 250 4
*. 2.4 rNz.En -8
'- 9 .* 10 -15 - -12
,.... End
- 1 'p D -- 16
-1 -
Nozz 2 Chart I Page-2 of 2 7:50 PM9/24/02
1kc FRAMATOME-ANP NONDESTRUCTIVE FXCAMIN4AT1C3J P'Rnr* *I /3t-A-z* 7 Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-1SI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2 3, 4 and 5 A PRA-MA'r .MEAPI Reactor Head Penetration Ultrasonic Examination Data Sheet Customer: W M-C Plant: , IBe,,ýJ. Unit: Penetration No.: 3 Procedure: 5q- 15/- jOo-o"j Equipment: Description VH# Cal. Due Date SN#
. I jTomoscan "1o14q 16 Channel P/R N/A N 1,/1, ACCUSONEX v-Data Acquisition Software: Version 6.2.5 ACCUSONEX"A Data Analysis Software: Version, ".
Cable Length: - cc) Type: Ze&- i-q # Intermediate Connectors: I 4Calibration Block: "*o,,I,/3o.e; Calibration Setup: Scan File No.: A C, o'z .-..- Initial Calibration File: 4 qz0z(,. A-vZc..,,. or. c.Lis1< Final Calibration File: c,r -OIJurp, "FJL 7. Scan Start: Z = Scan Start: 0 -:5 Scan Stop: Z =6.-V8 Scan Stop: 0= *C.s Index Increment: 3' NODSRUTV EAIAMNPOCDR te Channel
/
Anqle 5"o.. Serial No.
- 5 q"*cM Comments
/
Results: I c!-e3c7ordable Indication-s Leak Path Detected Axial Flaws Detec-ea -: Circumferential Flaws Detected Comments: Analyzed by: evel: Date: /re " Reviewed by: Level: Date: / ,,. TYPICAL DATA SHEET (AA 1 O9-2 FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOM E ANIP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 3 Procedure: 54-ISI-100-09 Nozzle Dimensions: (inn ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 17 End of NozL (in.): 0.24 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a Axial Scar ' *Startl I *kLde{].',@ & lI'1'St6p' I ,Ideg :.-, .:" ,Setup: v ,: Ch2 n/a Ch7 nla {' ~ *ý j: Ch 3 n/a C / Circ. Scan Start: -5deg @1 -0 " Stop:I 365 Ideg @1 6.781' Setup: 3 Ch4 n/a Ch9 n/a Files: A226908.36.54 IA2269_08.48.15 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw 0 Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI \' 2' 3 4 5 6 7 . 8 9 10 11 12 13 14 15
'16 17Data Loc. 17 47 "" 77 107 137 167 197 227 257 287 317 347 17 Degrees WELD iNoz. Loc. 0 30 60 90 120 150 1180 210 240 270 300 330 360 Deqlrees PROFILE Noz. End 0.24 0.24 10.24 10.24 10.24 10.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Inches MAX. 3.35 3 66 14 00 14.37_ 4.39 14.27 3 97 3 62 3 29 3.10 3.00 3.19 3.36 Inches MIN. 1 98 2.37 2.92 3.27 13.31 13.17 2.83 2.27 1.92 11.71 11.73 1.73 1.98 lInches Comments: Measured Thickness: 10,618 @*theta of 1 2261 deg with an axia poitono 5.81 Limited Scan? (YIN):l n I Analyzed by: Date: ? /Zr,/4 , Analyzed by: 2 ,i Z'4 Date:
91261023:19 PM Nozz 3 Page 1 of 2
'-Ag.~~~oz a 3a 8,'I..4 a a 'aaa a
- a. FRAMAOMM ANP'., a . ' "... . aa%.,,.'.
103 1/2 . . _', .** _. ". __ '.: ' .. . . . .... .. . . .'.. ..". . .'. -- ..... .>. , . . - a-- ' - , * ., a .- - ' ,, -t .. k' * ,, , ,-.., , ,,'a .to, 14------ 14.0 a----- - - - - - - - - - --- -- - - - - - 125012 , ...------ --- -- - - - - - - - - - - - -' - - - - - - - - - - - - - - -- - - - - -- - - -' - --- - --- g22z2 'aF' 14.5 .-...... .
- -- ---.........-......... ..... : ,-'- A .
2 o ,
,4" ..... .$,.J,-af- :;.... ..*
12.5 12.0' - --- 4---------------------------- ----------------------- -~ a?.t'j 9 -. - 5*- - - ~ ~
- a - a a- a .- a - -- - - - - - - - - - - - - - - - - - - - a--
. a , a 'a a a ;
1 .5 ---------------------- .--- .--------------- .--- .--------------- .--- .------------------------------------------------------------------------ .--- .--
.055 .-.------- ------ ------ .-.----- ------------ .-.---- ------------- .-.------- - ---------- --- ---------- ---- ----------------------- ------ -- - --------- - - ---
110.5 0.0 - .------------------- .-------------------.-------------------. -------- ------------ ----------- ---- ------ -------------------- -------- ------------ --- 10.0 7.50-- ---------- -- ---------------------- :. ....................................... 6.0 5 - . ... -- - - - - - - - - - - - - - - - - - - - - --.- 65.5.0 ----------- ,. ---------------------------------------------------- 7.55 -.------------------ ----------------- ------------------ ------------------------------------ ---------------------------------------- 7.0,5 --.....- ------ *-........ 6 .5 ...
--- -- -- -- -- -- ----------------- III -- --- --- --- --- -- -- - - I[IIUI
- III.
-- - - - -- - - - ------------- .=--- -- - -- *.. ---- . . " --------------------
Downhili' 2.0 -Side,,,,
1.0 a-----
s ~ a1a ------ 4' 0 .5 '--------- a -- ----------- 0 .0- --- -- - -- - -- - -- - -- - -- - -- - - - - - - ----- - -ar 0 1z~ .' 3 - ' . -- a1 0% -'-- --------- ----- -------- -----a--. a- .. aa-- a..
.y.Zr ~~10 ~ - 150O 200.25 30 aaa&? a;?3O.
4aa ; .-'a ,a I "". . ', g' 4 a' ,A' a'QN q ' ta~a
-- 2 -3 -- 4
-6 -- 7 -- 8 10 -- 11 -- 12
. - .. 16 I~ ~'t
- 3 --
=-*14-14
-- 15
--u-unUphill / Downhill demarcation Etr-Noz. End 3:19 PM9/26/02 Nozz 3 Chart I Page 2 of 2,
L Cu£C I. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Hbad Penetrations PROCEDURE NO.: 54-fSI-lOo-0g I PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 I Reactor Head Penetration FRAUATOM* AMP Ultrasonic Examination Data Sheet Customer: N MC c Plant: - 3epe.L Unit: Penetration No.: lProcedure: 5- ISI- ,LO-') Equipment: Description VH# Cal. Due Date SN# gTomoscan " "I *'l,, "/2.0-o3zq 16 Channel P/R INA N AA ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3.5', V,, Cable Length: GOC Type: Ze.- 14-q # Intermediate Connectors: I Calibration Block: "o//q3o - Calibration Setup: Scan File No.: Initial Calibration File:A 2 6//A.."q Final Calibration File: cosinwurb r-Epommnk.4 7 Scan Start: Z - Scan Start: 0= - ° Scan Stop: Z = ,7 Scan Stop: 8= Index Increment: 30 Channel Angle Serial No. Comments Results: 00 Recordabll ndicatinn) I Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed 6y. Level: - Date: P- ;-02 Reviewed by: Level: 4L2Date: la . 7 TYPICAL DATA SHEET 6ew.2'ICJl. FIGURE 5 Page 31 of 32
S IFRAAATOME ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - Nozzle: 4 Procedure: 54-ISl-100-09 INozzle Dimensions: (irft) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.2 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a Axial SC~afmlt' i' ~'.S-t;I;Pýdg@I SIoe:~~I~g~L~;~ tupl Ch 2 n/a Ch 7 n/a F! ... '- ; , f... .:Vv- Ch3 nla Ch8 n/a Circ. Scan Start: j-5deg @ -0.7" Stop:i 365 Ideg @ 6,781' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_01.08.37 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adlusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to MIn Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I N RI _ ... ... . 3 4 5 6 7 9 10 11 12 13 14 17 Data Loc. 0 30 60 90 120 "150 180 210 1240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.20 0.20 0.20 0.20 0.20 "0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Inches MAX. 2 67 2 79 '3.29 3.71 4 05 4.27# 4.207 4.17 3 83 3 47 13 09 2.85 2.67 Inches MIN. 1 68 1.76 2.17 2.73 3.19 3.43'1 3.53 3 33 2.97 2.41 2 03 1.84 1.68 Inches Comments: Measured Thickness: 0 64 @* theta of 188 deg!with an axial position of 55 Limited Scan? (YIN): N Analyzed by: Date: -02_ Analyzed by: Date: 10 # - v 4 o0.-Zj.--l~ 9/241028:35 AM Noz 4 Page I of 2
.4"'
'4' I., 1'
' FRAMATOME AN , . - NozIe 4 Profile ' "S .\'k
'4' .;.
/5Z ( .
'.,' 4,:.:,:."* * :' ji.. . ';:,:: ."4:'"4" " . . -. - II 44 4* *'
- - -'2.2 *a '
14, 5u 14.0- -... .4 ,,..,'. , ---. 'v*:.;...;,'_. .< -,;.; ;;-*.'*. . .__ . . . . I 1 ..... .... ... . ................ 7------------ 7'7-- .................. 14.0 ... ... . - -'- ---- - -- --------------- ' - -- ----------- ----------------- ----------------- 12.5: -----------. ----------------- ----------------- 12.0' : "... ----------------- ----------------- 11.5 " - ' - - - ----------------- 11.0 -------------------------------------.., -................--............... ----------------- .................. 10.5 --------- -------- .. ..--- 10.0 ----------------- 9.0 5-----
----... . I . . .----------. . . . . I.. . . . . . . . I.--- . .. . . .. ---------------
I.,... ......... 8.5 4 -------- I-------- I-------- I-------- ------------------ 77 55 -.-.--------------- .- .----------- ---. -----------------. ---. ---------- --. -----. --------------------------- -----------------------...----- ...- 7.0 7.-- -- - - - - - - --- -- -- -- " -- - - - - - - - - - - - - - - - - - I- - -- - - - - - - - - - - - - - - - - - - - - - ---
.50
- 5. --- -- -- - --- - - --- - -- - -
5.5 1......................................................5 -"...................
.......... 14 2,5 * , == *m , ~mm = = m w = = = == = =* ' " .I.... . .. ,*- -- -,,= -- "'-- - "
Downhill 0.5 3. ;;-* . ..-* ',*:..... ...... .. * . ......... --................ ------ 4.*:-* ...
- 1.5 .
* ::.- :.'."-::.... "4.
; . -.I-.' ---------- :..... - ---. -------
4".. ....... . . . .'. ,4 "arr-
,*!-y' 1 a'
*" a.- 3 - 4-
-5 -- 6 -7 -8
-9 -10 -11 -12
,13 115 l -- 16
-Noz. End 1 ammmrnuaaUphill I Downhill demarcation 8:35 AM9/24/02 Noz 4 Chart 1 Pagb 2 of 2
0AC . FRAMATOME-ANP NONDESTRUCTIVE EXAMINATIrHN PRflC*Fnlfll=P Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration PRA4r,* a, AMP Ultrasonic Examination Data Sheet Customer: WM .C Plant: OI*a.. AJ.. Unit: Penetration No.: -4 Procedure: 5- /S/- oO-' Equipment: Description VH# Cal. Due Date SN#
.Tomoscan "-I1-4o3 1 .- c.
16 Channel P/R N/A NA1 /.A ACCUSONEX"4 Data Acquisition Software: Version 6.2.5 ACCUSONEX Data Analysis Software: Version .- 5 " Cable Length:- *0' Type: Ze,- 1u,-q # Intermediate Connectors: I
,Calibration Block: &0/19306/ . Calibration Setup:
Scan File No.: , I.'p7 Initial Calibration File: A- 2S 9._ 1
.,1' Final Calibration File: cr,,Jr M '.,"
, a() ; .34.9 Scan Start: Z = -. 7 Scan Start:'G = -° Scan Stop: Z = (,.7F; Scan Stop: 8 =.7es-° Index Increment: 31 Chann I Angle I Serial No. Comments
/ 5.0.. 5e ,a. c_ x
/
Results: o ecordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected "Itr Comments: Analzed b: ,.. ,Level: 7 Date: f-23-02.- Reviewed by: Level: -Date: /0- /. , TYPICAL DATA SHEET 40* 01.01,4, Ar/ FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOME ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 5 Procedure: 54-IS1-100-09 Nozzle Dimensions: (inr ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.34 Probe Serial No.'s: Ch i S0420CN Ch 6 nla Axial Scan .. 't e4 ) . , top: ,:. deg ,@ *: .- %LSetup: Ch 2 n/a Ch 7 n/a
~
Fjes- ~ ~~ S>-Ch3 n/a Ch 8 n/a Circ. Scan Start:I -51deg @L L-.,7"j Stop:I 365 Ideg @_ 6.78' Setup: Ch4 n/a Ch9 n/a Files: A2266_16.28.44 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI ,_ 3 4 5 6 7 10 11 12 13 14 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 1150 180 210 240 ... 270 300 330 360 Degrees PROFILE Noz. End 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 Inches WAX. 3.20 338 3.78 4.18 4.57 4.79' 4.85 4.72 4.43 40 354 327 3.20 lInches IMIN. 1.79 `1.95 2.28 2.65 30TO6 3.34 3.40 3.22 12.85 247 2.03 1.79 1.79 nhes ne Comments: Measured Tickness 0.5@ theta of 77 deg with an axial position of 1 4.51 _Limnited Scan? (YIN) N Analyze d by :
--__* /* ,* * . *D ate: _ . o __A nalyzed by :
- AD ate:
9/241028"35 AM Nozzle 5 Page 1 of 2
4 .4 .4 (4 44
- 4. 4 -4 4 444.
4.t.4 4
- IFRAMATOME ANP - ', - .4 4 4,.
44
-I - -
4,4 4
v' 4-4
.4 S 145.0 - " "'4-... .'.. <~.. .4' ' ...
4..". .. . ... 7. 4 4 4,4., 14.5 .. . . . . . -.. ............ 13.'-":- 47-- --- 13.0 -----------
,. S_.:..-.'.:..::'.!
1 2.0 . . . . . . .. . . . .. . . . . . . . . . .. ... . . . ----------- 12.5 -- - -- - - -- 12.0 11I5 - ~.~ - - - - -I , 4 -------------- . 4. . . 4.. . 4 - '. 11.0 - - ........... ...... S.................. .................. 10.5" ........ -L ------- ---------------- ---------------- ................. ----------------- i..... I - - --
- 4 10.0 --------- ---------------- ---------------- .................
9.5 9.0 ---- 8.5 ........ --------- ---------------- ----------------- 8.0 ........ .......... ................. ................. ------------------ 7.5 ........ --------- ----------------- ---------------- 7.0 ........ ---------- ------------- ----------------- 6.5 ........ 6.0 ........ ----------------- ----------------- ----------------- ----------------- ----------------- ----------------- 5.5 ------- ----------- ----------------- .................. .................. .................. .................. ----------------- 5.0 -- ----- ----- ------------------ 4.5 k A
--------- __ I ------------------ I .uuea.u A miuitnuumuunaauus A nnfueegffcnnasuu I, 4.0 unauvnuuui iuijwtflNAEfmguTje4 in.inw1 usuuuainun
- 2 ': 44,,
3.5 5 ,S 4 ?& 3.0 ---- - -- ---- - 44p4 (f*4\4)4S Downhill 2.5 ------- --4 --- -- 4, 4444
- ---:-:.- 7 -----
2.0'° --- 1.5' ----- ---- - 4- 4
- 47---
7.--- I., 1.0.5 0.25 *'7" .. . 4... . ----- ----- ---- 00,' _. 4
- p
'0 -4 . I I-
- 44 200'. 250, : 1- ; 300,:O.':>
* ,.4 _
- S,4.44 "~ " '4 ' -' ?' '" " . . . *,**,, t" - 4",* .4 tJ 4 74
--. 3
-7 ji-9 -11 iw. -- 13 - 15
'- Uphill / Downhill demarcation
.- Noz. End I 8:35 AM9/24/02 Nozzle 5 Chart I Page 2 of 2
??
ki -' FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Hfead Penetrations *P O PQ-100-1, ROCEDURE
* ' PQ NO.: NO.: 54-ISI-1 54-PQ-100-2, 00-095 3, 4 and A Reactor Head Penetration RA*4 - ItZ AMP Ultrasonic Examination Data Sheet Customer: Nimc Plant: Po,,*,A 4 BeA Unit: I Penetration No.: C. Procedure: 4.'£ I5/- /AO-0f Equipment:
Description VH# Cal. Due Date SN# pTomoscan 11 ,2- /-7o o37 16 Channel P/R t/A PI/4 I/,1 ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 350 & Cable Length: 501 Type: # Intermediate I-U.. Connectors: I Calibration Block: &o// 3vE/ Calibration Setup: Scan File No.: Initial Calibration File: A 7 =t,... ,o. - Z/ . 0 A 'ZZt,*...- /0' Final Calibration File: -, ./,6C3I7 Scan Start: Z-- O,,1 Scan Start: e = -5 Scan Stop: Z = II. Sl. Scan Stop: 0 =3o5' Index Increment: 30 Channel Angle Serial No. Comments 1 6' .30
*- 30,"t. -3 "5 o Z. "roF:D Z3 . &O3s 355oZo
&,*s 1" '_,'3 6 0 -z Results: o Recordable Indications-' Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected RComments.:
-Reviewed by: * ,.,_ j a .,. Level:- -'L_ Date: /6/;2 lo __ TYPICAL DATA SHEET FIGURE 5 q~ 1j 6523U Pace 31 of 32
IAN r- Z MKdA~rC1KAE = t WP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - _ Nozzle: 6 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.t ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 243 End of Noz. (in.): 3.72 Probe Serial No.s: Ch 1 35044 Ch 6 35052 tdeg,,, I - Ch2 35202 Ch7 n/a
*, " .. .- Ch3 35070 Ch8 nla Circ. Scan Start: I -51deg @I 0.47 I" Stop: 365 Ideg @[ 11.82w' Setup: I Chh4 35044 Ch9 n/a Files: A2265_10.15.41 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI "__'
3 4 6 7 8 9 10 11 12 13 14 15 16 17
' Data Loc. 243 273 303 333 3 "33 63 93 123 153 183 213 243 Degrees WELD Noz, Loc. 0 30 "60 90 120 150 180 210 1240 270 300, 330 360 lDeglrees PROFILE Noz. End 3.72 3.72 13.72 3.72 3.72 3.72 3.72 3.72 3.72 3.7'2 3.72 3.72 3.72 Inches MAAX. 6.72 6.76 17.00 7.31 7.42 7.76 7.78 7.69 7.47 ,7.20 7.00 6.76 6 68 Inches MIN. 5.11 5.18 15 43 5.77 6.13 6.40 6.56 6 36 6.18 15.77 5 41 15.22 5 09 Inches Comments: Measured Thckness:j 0 63 @ theta of 212, deg with an axial position of 8.131 Limited Scan? (YIN): N Analyzed by: -'/ ._Date*: /Z/o1.i - Anlye by:A"/p Date:
/ 00 1- ta-si.
Nozzle 6 Page 1 of 2 912210212.01 PM
ZO 10Z9e I 1JE8o 9 e1ZZON g0I72V/61d MU0:;. uoileoJew-p II0qu1o /llqd l I. ,,- -. 6"-' L OL-
-- 9 \ 00 :- .fM... 10
'4
* , -q
",," " ..... ...... ..---...... ..... ..... ....- ...... ..... .l .....
...- A -- - - -- ---- --. ......
- - -- .....----.. ... ... ....-- ---- -------- .. ..------- --.. 7-------- . .. --
S..
. . .. . . . . .. . . .-I-.. . . . . . . .. . . . . ..-I. . . . . . . . . . . . .. . . .- . . ..-.. . . . . . . .. . . . g C
* ..--..
- 3,,,. ,.. * . * . .-. . . .--...
. . ./ r-..
.. . . . . . ~~~~~~~~~~~~~~~~~~~-
.. . . * .- -.- t.--, . --
r .* .-- ..-. .--
- ') .,* .. * . ..o
. . ...-. o
,. * *-*.,4 . 4 O--T-o' CD to
.,.--------.. , .. . . --- . ..-- . -- . .-- . - O's
.- * *',:,X * ,-,;'**! i *,' ....-
,,- ---------?.,,'------ ----------- ......... 0*---...9..........-".....'
'4 * **o . , * ,;, . , *- ,- ,*- - -*--!--'
- - - -- --- 0.-- - - - - - ----.. , ' 0". - -,-- - - - -- G, *9 *'
4.-, ,taA
-... '... .... . . . .g s~~~wo,~ oLm ;-;--; -----------l---- ---------- . . -..----- . ..-
--------..- - ----.. --.. --.. g
"----;----------" :'* ;* ' '"*,;* "'i *".";.'. '"",:'7"- *' ' *'r*":; O*'L-",*"
0i
(. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1k .Reactor Head Penetration P*AU ATOM AMP Ultrasonic Examination Data Sheet Customer: N.MC Plant: o,,. , B o .A Unit: Penetration No.: " Procedure: 6-g- is/.-./00, 4 Equipment: Description VH# Cal. Due Date SN#
.Tomoscan , "/-7o ,o3I 16 Channel P/R ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.--5-".,. ";r Cable Length: 560 Type: Rc.-r1-4 # Intermediate Connectors: I Calibration Block: IniialCalbrCalibration Setup:
tcan File No.: ,q . Initial Calibration File: i 2.. 2/ Final Calibration File: SA e = M.37 Scan Start: Z= .I7 Scan Start: 6= -r' Scan Stop: Z= Io' Scan Stop: 8 = Index Increment: 30 Channel Angle Serial No. Comments
.3o"lj 3 zo 7.. 1D 3- 0.0,c 35040 d5" *,ofe 3 6 o fi Z Results: NoRecordable Indications- Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: Date: f- '-2-0-2 Reviewed by: / Level: Date: O. L v l I /' T""/"YPICAL DATA SHEET 7 FIGURE 5 Page 31 of 32
0 A F::R AIAATO M I ANI: - ... *.. LJL 'IIL customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Procedure: 54-ISI-100-09 Nozzle: 7 INozzle Dimensions: (im) ID: 2.750 OD: 4.000 Thickness: Downhill Side of Nozzle (deg-.): 0.625 258 End of Noz. (in.): 3.58 Probe Serial No.'s: Ch i 35044 Ch 6 35052
...... ,,Scan.,L.
... , St*tIrA,4*t d . Idg kAxial Ch 2 35202 Ch.7 n/a M .,, . , Ch3 35070 Ch8 Circ. Scan Start:L 0.47deg@ [j" Stop:I n/a 19 Ideg @1 365' Setup: I Ch4 35044 Ch9 Files: A2265-19.14.49 n/a Cal Block SIN: 60119300 Ch5 35052 Ch 10 Depth End Point I n/a End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Flaw Surface Weld Location to Min Min Max Max Total Min Max Total Length No. (ID/OD) Flaw Tip Angle TWD Aspect Flaw @ Flaw (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Mn Max 1
2 NRI
- 4 7
-9 10 12 13 14 16 17 Data Loc. 258 288 318 348 18 48 78 108 138 168 198 228 258 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 MAX. 651 6.55 6.79 3.58 Inches 6 98 7.64 7.59 7.59 7.54 7.40 7.17 6.84 6.60 6.51 MIN. 5'00 509 537 5.56 6.27 6.32 627 Inches 6.27 5.94 5.66 5.37 5.19 5.00 Inches Comments: Measured Thickness: 063 @ theta of 185 d*g with an axial position of 102 Limited Scan? (YIN): N Analyzed by: Date: 91 - - C,- Analyzed by: Date:
91231029 31 AM Nozzle 7 Pa~e I of 2
0-.
""14.5 -.. . . -. . ............ ..- .
i * , ;" ... .... . :...-----...---------....- 14 .0 ----------- . .. 13.5
...14.0------ . .... ........ . . ;....-.;.
13.5 ----------- - - - - - .. .... , " , " " ", . 13.....0 ....... --------------
~~
12.0 ~ ... . ...... .............................. 12.5 ---
. .- . . - 1' , , ""' , ""I p71" 11.5 .. . . .. . . . -- "- ':--- -:-------"
1 1.00 " -.- -.- 11.0--------.-.- . . . . .. . . . ..- . .. . ..-. ..-----------------.-... . 0 7----- 50.0 .................. ................. ................. .................. .................. 3.5 ......... 7.0 -.. :12- 1 - ................- 605 5.0 *'**:* ' " ---------- 4 .0 ------------ -- -" - 3 .5-
*. wo*/ -- o- - -- - 1 --- ------------------
3 ----- ---- - --- 14 ----------- 9:31 AM9/23/02 N ozz le 7 C h a rt 1 , ( fý-03 P ag e 2 o f 2
FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION P*mnntto* Remote Ultrasonic Examination Of Reactor Head Penetrations 9 . / I I PROCEDURE NO.: 54-fSI-100-0g PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5
. Reactor Head Penetration FRAMAMME AtNP Ultrasonic Examination Data Sheet Customer: NMC Plant: Po,,,'/ B2lA, -. Unit:
Penetration No.: g" Procedure: " -Is/-/*-/ -of Equipment: Description VH# Cal. Due Date SN# 4Tomoscan 12/7o. 7o3i , 16 Channel P/R 0 ,A t,/, ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3,T& '3.1 Cable Length: 5 o0 Type: RG.- PA # Intermediate Connectors:
*Caflbration Block: 3o//D301E/ Calibration Setup:
Scan File No.: Initial Calibration File: AZ'.cz /0'v.zf'.3 A zzG4,- iSo-. -0 Final Calibration File: R9244- cL-. 19.37 Scan Start: Z .0-,q71 Scan Start: 6 =. S Scan Stop: Z = 17.0 Scan Stop: 0 =t, Index Increment: 30 ChannM1 Angle Serial No. Comments 3 (&0'.s -3500 Lisvz- I soq¶'I Results: - ecordable Indi Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: . evel: Date: '*,Zo .1 Reviewed by: .Level: -1 Date: 9'/2. TYPICAL DATA SHEET 1., S0 FIGURE 5 Page 31 of 32
.A- n, CRDM Nn77'iA I lltrnnip li'njinfi,,i et..
Customer:" -.. . . ~ Nuclear - Management Corporation Plant: Point Beach
~. **~.*IQ ill lLgtl % a La IULP Unit:
I 1 L Nozzle:
--- .8 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.-): 260 End of Noz. (in.): 3.56 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scajt.'.I.. tIbf- .... -"J-W Setdptlj,.I.s,.,." Ch2 35202 Ch7 n/a Fi-,-"2.. .. ,, ........ . .... ....... ;-.
-... .,Ch3 35070 Ch8 35070. n/a Circ. Scan Start: -5deg @1 0.47 " Stop:1 365 Ideg @1 17.62j' Setup:L1 Ch4 35044 Ch9 n/a Files: A2265_15.07.00 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (de g.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 2
-3 4
5 7 8 " 9 10 11 12 13 14 16 Data Loc. 260 290 320 350 20 50 80 110 140 170 200 230 260 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 Inches MAX. 662 6.63 6.84 7.00 7.73 7.68 7.71 7.62 7.37 7.13 6.93 6.74 665 Inches MIN. 5.25 5.23 5.41 5 65 6.46 6.44 6.49 6.35 6.10 585 5.56 5.25 523 Inches Comments: Measured Thickness: 063 1@ theta of 168 deg with an axial position of 8 64 Limited Scan? (Y/N): n Analyzed by:-Date: z .. ,,0 Analyzed by: A Date: Cý/ L.-, 09 o. 9/22/025:12 PM Nozzle 8 Page I of 2
SJo Za6e8d . *IEqO 8 9lZZON ZO/I2/6VWd SE:S UOI1RWaewep 1IP4uMaoo /- 114llu,, Sl, PU3 -ZON! 9k----- OL 6- 4f! LL 9-B £ .==,-= %1,
$7
,°... """;'*
S° ;*,*:
* .g.,.*/r,',, "..."
" . "O .
ee fi
. '7.. SL: .. ...
, .a "' '"". " ..... . p ' '. ....
- °;AA",'
1/4 .... n',.t i:,
- <-Q*" ;*; P, r.=*/>
-I 0 - , ,I i5, f, - O-- - -- ------------ , .OI.- -
4'7
.. , -, . ", 1 . - O'
-a-----
!IIIuMoa 44. -- "------ "-" - -'9 S-- .a a
"---- -------r .. -- . ---
. in.
no:::::::::::::: :::::::::::::::::::::::::::::::::m:::::::::::::
-- L----
~~~~~~~~~~~---------- -----------
--------- I--I-----
- I-
'I . .-. --
I" n.I
,.N OT
--4--
g O'
~
S... .............. *.............. t ............. .............. 1 ........................... O'
- . t- - -". 'm S. .-.... .... ... 1
. * + .r": ..*, ..----
I --- - - - '- --- . - - V9'. - - - - - - --- ' F fr3.- -- - -
.5 4
-I , ,- -.. -------- '----- ...- g 6 /
Li, St
.S. .W* , I *. . .*I , ' /
45
. . -- -- - -- - - -- - - J -----.. " --*'" --, -----
V
-----""7 ,--------------------- - ". ---
- I--------
---- ". * -"o I'I, I" :-- '
*4'4 "C--- --- ----- : ------ -------------- ------------------ S:,' .,,
. , . . , ------------- .* ., ; - * . '-',.,,---- ,..9.* 7.: ,. , 7. :,----,,-.--,--,- ..-.... . ,.
j-- "" " ------- ---- ----- ------- --------- e
------- , - --- ----- elg- J----,.-------,,--**
l-ZO: ------- --- .. ,., * :'-.-" ----- --- --- I,
---------- I------- 7.. ---------- ------
..--- ,.-- ,,-.-'---- ------------- --------- 41
'--I
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCm:rnrInF Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-100-09
-PQNO.: P0-100-I, 54-PQ-100-2, 3,4 and 5 A Reactor Head Penetration AMTIOM, AMP Ultrasonic Examination Rata Sheet Customer: M.MC Plant: Po,,,,# Be,,., Unit:
Penetration No.:*, Procedure: *q-/15-,/a-*o Equipment: Description VH# Cal. Due Date SN# 4Tomoscan z-/7aZ =o31: " 16 Channel P/R N/,1 ACCUSONEX "Data Acquisition Software: Version 6.2.5 ACCUSONEXM Data Analysis Software: Version 3.9 0 Cable Len th: 60 Type: IZ6 -,-"-A # Intermediate Connectors: I
,Calibration Block: "///I E Calibration Setup:
Scan File No.: 22.s- c 3-. 8 / - Initial Calibration File: 4 :-'_/. 2:.-, Final Calibration File: ;22 4 - o. 'j -.7 Scan Start: Z =" .* Y?" Scan Start:' = -J" Scan Stop: Z = 1.7/Scan Stop: 0 Index Increment: 3° Channehl An e Serial No. Comments 6' "35,DW 3111.1-1 3 - zZ . -oF D 3 e,s0 350io 5" (p , o'5 3 *o,¢ 075- 3!F02-F Results: No Recordable Indications Leak Path Detected I. Axial Flaws Detected Circumferential Flaws Detected Comments: V..AT7 AnalRed by: 9 Level: Date: - q. -"2. Reviewed by: Level: Date: Iz,. q. 67..
>7 TYPICAL DATA SHEET FIGURE 5 @)911LAlD -2 Page 31 of 32
0 A CRDM Nozzle Ultrasonic Examination Data Sheet FRAAMATOME ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 9 Procedure: 54-ISI-100-09 INozzle Dimensions: (1s.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (de9".): 130 End of Noz. (in.): 0.91 Probe Serial No.'s: Ch l 35044 Ch 6 35052
,lc . ,Sta Stop:_ '"," d .. __t_,_- Ch2 35202 Ch7 - n/a Ch3 35070 Ch8 n/a Circ. Scan Start: J-5deg @1 0.47 I" Stop:I 365 Ideg @L 11.911" Stop: Ch4 35044 Ch9 n/a Files: A226505.08.12 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI- -..
2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 Data Loc. 130 160 .190 220 250 280 310 340 10 40 70 100 130 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.91 0.91 10.91 0.91 0.91. 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 Inches MAX. 3 62 3 93 4.17 4.58 4 62 4.86 4.78 4 56 4 09 4.09 3.82 3 66 3 62 Inches MIN. 2 84 2.99 3.19 3 57 3.76 3 80 3 68 3 47 3.11 2.84 2 84 2.72 2 84 Inches Cmet:Maue Thic'kness: 10.64 1 @theta of 150 deg with an axial position of 6.7 Limited Scan? (YIN): N Analyzed by: OZ6__-= tý2 *_ Date: V,/
, - 07... Analyzed by: AJ/,,? Date:
9/221028:43 AM Nozzle 9 Page i of 2
Z1 Z 968d '200r7'/l Q I. JL-43 6 91ZZON ZOIZEI6V'JV g9.8
------------------- .................... ------------------- ....... X........... ------------------ 0L
---- : -------------- .................... ------------------- ------------------- ------------------ ------------------ 9'L
------------------- .............. ------------------- .................... ------------------ ------------------- -9*9
------------------- ------------------- I------------------- ------------------ ------------------ ------------------- 0*60
---- t- --- 4s> -----
.-......b--------------
-T6 sot I-'. 1.' . 4
---------- 7-------- I I------------
T
%9*Ttt I ,
1, _ ,
--------------7-7
........... ------ .......... I---------
7---
-O *61
-- --- ---- - - - SIG61
.......... .. 7------------ ----- .. . . .. j
-Oon
- II I I Ai.9IZZON- B ;';,~.22 > :*w YIpj~%.~ vs~6vvs
CuZC .. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEfltRF L-A1. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-1 00-09 I PQ NO.: PQ-I00-1, 54-PQ-100-2, 3, 4 and 5 I 1kReactor Head Penetration FRA-, V5,MZ AMP Ultrasonic Examination Data Sheet Customer: NMC_ Plant: J~e--l F3 Unit: Penetration No.: )0 Procedure: 5q- is,- 0j Equipment: Description VH# Cal. Due Date SN# LTomoscan ""/./o3 -2.-oz. 16 Channel P/R NA NAI -I1A ACCUSONEX'm Data Acquisition Software: Version 6'.2.5 ACCUSONEX Data Analysis Software: Version 2 7-. 8' ,, Cable Length: Got Type: Ze.- t-4-q # Intermediate Connectors: I ICalibration Block: &o/)q.30o6 Calibration Setup: Scan File No.:. " jy'?., I Initial Calibration File: 1,)26e 2./S/ Final Calibration File:c,.rAJb PRnp,,c
- 7. 7.T.'I Scan Start: Z = r-.7 Scan Start: e= -ro° Scan Stop: Z = 7.r'2 Scan Stop: 0 = 2,cr" Index Increment: 30 Channdl Angle Serial No. . Comments I 5o°* $ oS£IC(.
Results: oRcordable Indications Leak Path Detected iaT Flaws Detected Circumferential Flaws Detected Comments: Analyzedby: ,...... Level: Date: ý7,,.-o0-2-. Reviewed by: Level: -Date: 'o ". 7-
'e2ýTYPICAL DATA SHEET FIGURE 5 tA OcA' Page 31 of 32
m, A CROM Nozzle Ultrasonic Fxamin~tinn 1l*f* R~hnn MAArn KA A .d Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: -10 Procedure: 54-1SI-100-09 Nozzle Dimensions: (ha) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 37 End of Noz. (In.): 067 Probe Serial No.'s: Ch I S0381CN Ch 6 n/a Axial--' I e$ ...... ;., ,sSetutop,:,- Ch2 _ n/a Ch7 n/a
* .. ......... , *.. . .. . . . , h3 n/a Ch8 n/a Circ. Scan Start:'l deg @L-0j" Stop:I 365 lde @1 7.57j Setup: Ch4 n/a Ch9 n/a Files: A226719.31.33 Cal Block SIN: 60119300 - Ch s n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max I NRI _,
2 _, 4 6 7 10 12 13 14 16 17 Data Loc. 37 67 97 127 157 187 217 247 277 307 337 7 37 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 Inches MAX. 3 69 3 88 4.25 4 64 5.19 5.62 5.77 5.77 5.41 4.91 4.44 3.89 3 69 Inches MIN. 1.94 2.17 2.49 3.01 3.46 3.97 4.33 4.25 3.78 328 2 64 2.21 1.94 Inches Comments: Measured Thickness: 063 ( theta of 185 deg with an axial position of 2.72 Limited Scan? (YIN): N I Analyzed by: Date: Analyzed by: tIP7A Date: I 9-2 J.dL 9/25/029 05 AM Noz 10 Page 1 of 2
I ZJo Z aBed SIJe840M ZON Z0/9Z/61A'V V0:6 uoqleoaewap IllqUMoQ] / IILdRw 9L-L- L-9 £ ,,-,-
'3'
.3 . 3'44
.3 3 N
- U4 4 .3 A
- 3O- 0W.. 3333
,s ','3'"3 3' 'U o'o o'3/4 3'.'
A
*'.j* -*.o ~t. - ' *,, I - - - -- -- ----- -- -----
3-='"3
.. 4 - --- '.--
- -~i?3.'4
-, --- -(3-
- ,3--
3 .
- ---- 3/4-. r-' 4- .-
3 g'O IlUMCoO - - - - - ----------- . 3 OT
-.. . . . .:. . . . . . . . :. . .t. . . . . . . * .. . .. . . ... : . '. .
ST,
~hp. '.ammm.-.... l...... O'P,
=:-,-Z--*-- _."n........
S 4....- wt....... wpn u un un pw nmuhg;m wunn n~
..... .. ......arer g's
-4,;" S'.", """ 0"9 g99 3.- ---- ------------- --- - -
E'L "tr...3 <,3 ,.-. -,3 9's
-- - ----- -' -----.-- --- - 0'6 T6
--.--------------- "----.. I......
-- .I-,-----
,-,- .......--....-.---.- ------ ---------- /- --------- -- ---- w------ -,--. -----..... ------.---
---------------------------- :* , -- ".- -'--" ----- . ... "-* "--,------ ,W .--------- . .. ,,-,,--..
--
- g'ot
"----"----"" /,--------------.------- ------
----- -w-,----,--- O'U
-. ----- ,*, I------------------
,,--,----,*. I -------- wN -----------
, - .- 'V----------------',, *
" ---------------- ',,*.w, *
-------------- .' ; -.. °-'------------------------* .
o'kk O'Ct'
. " . * .. .---- ,'= ".
--------- . *,*...o ,'I
- w.**
" -- ... -------- :,l Wet
'sCk' 0"W
;'*kt N -
Cg 9C.. FRAMATOME.ANP f~A1iY( NONDESTRUCTIVE EXAMINATION PROCEDURE " . - Remote Ultrasonic Examination Of Reactor Head, Penetrations PROCEDURE NO.: 54-fSI-100- 9 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration FRAMATaME ANtP Ultrasonic Examination Data Sheet Customer: WM r- Plant: o #-,
, ej.-. Unit:
Penetration No.: !Procedure: 5j- IS/-,1oO--'* Equipment: Description VH# Cal. Due Date SN#
.Tomoscan *11, q "1/-/03 22 q 16 Channel P/R N/A NA '-'1A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version .3.'51y. .
Cable Length: Sot Type: k,z.-qI # Intermediate Connectors: Calibration Block: *4o/1,q3oe/7 Calibration Setup: Scan File No.:/*2f.20- .S.e */4 q Initial Calibration File:,.25%c*.,/.2. Final Calibration File: ca..rijvco *r Fot'*J r Scan Start: Z = -.. ' Scan Start: . 5 Scan Stop: Z = 1.61,"Scan Stop: e = 3W" Index Increment: 30 ChannM Angle Serial No. Comments I 0 l 5os. cJJ
/
Results: (lb-_ecordable IndicationsE3' Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: J.d Level: .17 Date: /- .o -1Reviewed by - Level: .'Date:
)TYPICAL DATA SHEET FIGURE 5 tlsý-p ojýzc-Q'z Page 31 of 32
FpAMATOME ANP CRDM Nozzle Ultrannin Fvmin2finn fl2*a kf Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 11 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in4 ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.j: 0 End of Noz. (in.): 0.59 Probe Serial No.'s: Ch 1 S0379CN Ch 6 n/a
~~d ____ ý i; C n/a C7n/a WW T- 4Ch fly/a ChB Circ. Scan Start:L -5.deg @ -0.7 Stop:[ 365 Ideg @J fl/a
" 8 161' Setup: 3 Ch4 n/a Ch9 n/a Files: A2269_01.06 25/A2269_05.24.18 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI
-3 - -----
4 6 7 4 8 _ 9 10 12 13 14 15 16 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.59 Inches MAX. 4.94 5.37 5.89 6 54 7.14 7.55 7.61 563 5.15 4.57 4.10 3.75 4.94 Inches MIN. 2.13 2.50 3.39 4.36 5.20 5.79 5.89 4.19 3.73 2.89 2.11 1.67 2.13 Inches Comments: Measured Thickness: 067 1 theta of 2551 deg with an axial position of 635 Limited Scan? (YIN): N Analyzed by: Date: 9. -7e- ,. Analyzed by: #j /A4 Date: - 9/26/20026:38 AM Noz 11 Page I of 2
6:12 AM9/26/2002 Noz 11 Chart 1 Page-2 of 2 CNZ. FRAMATOME-ANP NOMNDFRTRI It'ThIFI IFYA£1UllW* d DD* b'nn r I=II NONDESTRUCTIVE ;:yAAAJKA'MnK' n0ee'cr%"n= Remote Ultrasonic Examination Of Reactor Hiad Penetrations PROCEDURE NO.: 54-ISi-100-09g N I N.: PQ100-154-PC-I100-2. 3.4 *nd_/ PQ P N "A "Reactor Head Penetration FRAMAOME AUltrasonic Examination Data Sheet Customer: W4 me-. Plant: P,#-- 1 ki Unit: 5em_. Penetration No.: Procedure: 51- 15i- .oo-* EI Equipment: Description VH# Cal. Due Date SN# gTomoscan "11-/13 2ozzq 16 Channel P/R N/A N/ ACCUSONEXj Data Acquisition Software: Version 6'2.5 ACCUSONEXm Data Analysis Software: Version.3--5 .. Cable Length: O' Type: k>&- 1-4-q # Intermediate Connectors:
.Calibration Block: ",ol/1473o el Calibration Setup:
Scan File No.: ., ; 22C, 7_.-t. 22"0, y Initial Calibration File:,2,(*./f.
- 4'.,
19- -.2.4 o -y. 7.j5 Final Calibration File:cofi-,6,.itA,0 r Scan Start: Z = -,' Scan Start: 0= " Scan Stop: Z = 7.57 Scan Stop: 0 = Index Increment: 30 Channe Angle Serial No. Comments Results: -- ordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: Date: - Reviewed by : Level: Date: /O,' e*ý TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 12 Procedure: 54-ISI-100-09 jNozzle Dimensions: (ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg:): 0 End of NozL (In.): 0.51 Probe Serial No.'s: Ch i S0420CN Ch 6 n/a Axal,.Scan*,* Stit -- _:_ de_ , Stop: , Ide§g 1@.
" Setup:Ir , Ch2 Ch7 n/a Qjle. 4 AT,~ ~ i Ch3 n/a Chl8 n/a Circ. Scan Start:I -5jdeg @1 -0.7 Stop:I 365 _deg @1 _7.5I' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267 01.50.241A2267 02.23.35 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 nl/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (dog.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I2 NRI 3
4 5 6 7 ; 8 10 11 12 13 14 15 16 Data Loc. 0 '30 .... 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD N oz. Loc. 0 30 60 90 120 1150 180 210 240 270 300 -330 360 Degrees PROFILE N oz. End 0.51 0.51 10.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 Inches MAX. 3.08 3 25 3 57 4.12 4 60 5.03 5.15 5.13 4.81 4 29 3.72 3 30 3 08 Inches
]MIN. 1.191 1.31 1.65 2.33 3.32 3.76 4.16 3 89 3.46 2.1 1.71 1.31 1.19 Inches Comments: Measured Thcknes's=: 0 63 @ theta of 202 dea with an axial position of 6 22 Limited Scan'? (YIN): N Analyzed by: tr= jDate:, 9-;2.r -0 2 .-- .... Analyzed by: A( A Date:
7 ~~ ( O-0 Z,%(- uz-Noz 12 Page I of 2 9/24/028.35 AM
z Jo z 968d , ieqO ZL ZON ZOlIIZ/6VV g£:8 II*.,,?.
- I
.:........ .:_.. . 2... 90"*
- ---- --- ----------- ----------- S......:...........
- I
-A. '5 O'V "5A "S`
----------------- k-. I , --------- --
----------- ..... ------------------ * - .5 . 4' ---------
----------L ------
'Vol 9O's mnseomm
'kunneumak~~~~~~~k~~Wiin~~~i unaunf ~ ..... .ii~u ...... -~ -n --wnu -e
-e~
--ui-am
-u-e-te
-n-
-- ====- ====== ====.==-=-=-
------------- z ....
-- Ii 9.'
0"9 9.9
--------------- :__ ----------------- ----------------- k-- - - - - -- - - -- - - - - --.
I-.................
---------------- ---- tv ---------- 0*L
----------------- .................. ----------------- I................. I I-.................
097 I- -.. --.. ---------.
,I................
O's I-.................
,I........... .....
Ts 4 ................. 0'6
..................t__.
--------------- ----------------- ----------------- I----------------
------------------ ------------------ i.. ................
9.'Oi,
-'-a "----/" - --- " .--- . * :/-----
"'.I :'/ , : , -' - "-0------"
I"4,. 5j55.A. A"5 4A
-A 5' --
4 , . '4 , , ','i" -I, .." ,* A-s -
'~0It
, ' . . ,. . -A ' .,--- b I, ' .:-,.rlirw.....
ts 1 : . dN *p'O..r /*-'. fl ¶- ,- '
,r .,s ,',.
"T' R'- 77QR7k YT
Cl..C FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE " . Remote Ultrasonic Examination Of Reactor Hiad Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ -100-*i, 54-PQ-100-2,-3, 4 and 5
! t 1Reactor Head Penetration FR'AATO"MEAMP Ultrasonic Examination Data Sheet Customer: WMWC. Plant: c,-- !3e.c- Unit:
Penetration No.: 19 Procedure: 5q- IS- .o0"D'i Equipment: Description VH# Cal. Due Date SN# tTomoscan " ""/L/cI z-zZq 16 Channel P/R N/A N A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX" Data Analysis Software: Version q93 . Cable Length: go I Type: Ze.- t-- # Intermediate Connectors:
.Palibration Block: &,o/j93o06 Calibration Setup:
Scan File No.: At22.-.?3, Initial Calibration File: i9 24_irK29.9 5/ 4 Z627.67 oo. -3." Final Calibration File:CoA 0 r~yuco prxre"A*,'u Scan Start: Z - .7 "Scan Start: 6= -- " Scan Stop: Z = .777Scan Stop: 6e= j Index Increment: 30 Channel Angle Serial No. Comments Results: lecordable Indications Leak Path Detected Axial Flaws D--ecleo Circumferential Flaws Detected Comments: Analyzed by:) Level: V f Date: /0-2_7-0-* Reviewed by: , Level: .'-Date: /'/°-
/TYPICAL DATA SHEET 60 ,-,
FIGURE 5 (c Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 13 Procedure: 54-ISI-100-09 Nozzle Dimensions: (Ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 23 End of Noz. (in.): 0.2 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a A'tial , , .. S , Ie@.. I St I- ;"StP - Ch2 nla Ch7 n/a Circ. Scan Start:[ -5deg @ -0.7 " Stop:
~t ~ ~ ~-Ch 3 n/a Ch8 n/a 365 Ideg @1 7.781' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_00.03.01/A2267_00.39.15 Cal Block SIN: 60119300 ChS n/a ChIO n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI .....
2
- 3 4
6 7 , 8 10 12 13 14 16 Anlye _ _: -T _ _1 _ __- 17 Data Loc. 23 53 83 113 143 173 203 233 263 293 323 353 23 Degrees WELD Noz. Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.20 0.20 10.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Inches MAX. 3.11 3.37 13.73 4 29 4.87 5.13 5.19 5.09 4.77 4.27 3.77 3 33 3.11 Inches MIN. 1.46 1.71 1 227 12.85 3.55 3.95 14.21 4.03 13 47 2.63 1.86 1.54 1.46 lInches
;Comments: Measured Tickness:1 0 64 1 theta of 23.66 deil with an axial position of 14.311 Limited Scan? (Y/N):1 N I l zne A y v , , ,.k
- _ý'* . Da te : 1 - Z I9* - o ? - . ...Ana ly z e d b y : */ D a te :
/ ULsAV 0 .91. Z.o 1M 9/24/028:35 AM Noz 13 Parge I of 2
' F~RAM TMI ANF3, N -- 1- 13 P-'1.
*. 15.0 -' :-" ": - -- -- - - - -- . ... -
... 4%C .
- ---- *1*
13.5. --------- 1' 13.0 -- ----------- "1 12.5 --- - - -- - - - -- - ----------------- ----------------- ----------- "---------7 - -- - - -- -
, .4.
--------- .................. --- - -- - r- -- -
I .. . . .. . . . .. . . ----------------- ----------------- ------ - --- ---- -- -' - - - - - - - 11.0 -- - - -- - - - -- - - -- - ----------------- ----------------- ----------------- - -- -Ž . - V. .,P. 10.0 ---- -- - - -I--- --- - - 9.5 4------------- I------------- I----------------- I--------- --------- ii- --- - -- - 9.0 ----------------- ---------------- ----------------- 8.5 ----------------- ---------------- ----------------- ----------------- 8.0 ----------------- ---------------- ------------------ ----------------- 7.5 ----------------- ---------------- ------- . ......... 7.0 ----------------- ------------ ---------------- 6.5 ----------------- ---------------- ---7------------ ---------------- ----------------- 6.0 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- -----------------
- if--
5.5 ----------------- ----------------- ----------------- ---------------- ----------------- ----------------- ----------------- - -- 5.0 ----------------- ---------------- ------------------ ------------------ 4.5 -------- i--------- ----------------- ----------------- ----- - - - - -1 -- 4.0 to-M n-inaMaurt!4 -- ------------m~~~w i4" UmmIiua um 6 3.5 ----------- 3.0 ... - ...
--------------- ---------------- Dbo.nhfll
.2.5, -- -- - -- - --
---------------- -------I----- 7- . .4
.2.0. --------- --
1.5 -. ----------------- --------- I** (.1 V . 0.0'- '1 ')47 2I , , I I , , ,, ý;' 15 0 2 00 2 .5
-2 -3 -4
-6 -7 -8 10 - 11 -- 12
. - ---- 14 -15 --- 16 mn5wUphill I Downhill demarcation 8:35 AM9/24/02NolhatPge2f2 Noz 13 Chart 1 Page 2 of 2
* -. . *V, CiC I--
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head'Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Pt Reactor Head Penetration FRAMA*aMI A Ultrasonic Examination Data Sheet Customer: M )C, Plant: i,_.- B,- Unit: Penetration No.: 1N Procedure: 5q- Is/I- jO- 011" Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " ",/7/o. 16 Channel P/R N /A N 1A A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX M Data Analysis Software: Version 3-'ý2 s.5, Cable Length: IO' Type: 2&- -4q # Intermediate Connectors: I
.Calibration Block: &oio//q3oi Calibration Setup:
Scan File No.:. A Zzc,- o,,- ..- Initial Calibration File: A
-. *o.0Z2 I Final Calibration File: A16u: , 7.3 Scan Start: Z = q0"Scan Start: 0 = -* Scan Stop: Z = '7-41" Scan Stop: 0 =L,"
Index Increment: 30 iki ChanneI Angle I Serial No. I 501j. 15*oIZo C.M Comments
/
Results: (11-o Recordable Indications) Leak Path Detected Axial Faws etected Circumferential Flaws Detected Comments: Analyzed bY: Level: Date: qs't'f2
-Reviewed by: , . Level: -7*
Date: l- o.;z_ TYPICAL DATA SHEET FIGURE 5 Pace 31 of 32
PRAMAT(3tI" ANM CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - Nozzle: 14 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iia) ID: 2.750 OD: 4.000 Thickness: 0.625 Ch2 /3h l Downhill Side of Nozzle (deg.): 96 End of Noz. (in.): l- , "*" p Pd 0.26 l** '
*; "",,.-,,- *Y* S Probe 1". tu l Serial
"' .0,,*
No.'s: Ch I S0420CN Ch 6 n/a ItI M't~-- l ;g"*t
, S. ,*'n. .*N:'?,.-*, I F11 _____ d_____
"~ - ________ q,,,~i Ch2 n/a Ch7 n/a Fils ~ % ~,~4~f ~ ~~ : /£ 'Ih n/a ChB n/a Circ. Scan Start:I -51deg @1-0.7_ " Stop:I 365 Ideg @1 7.9f' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_09 59.52, _11.05.05,11.10.59, _11.42.02 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to MIn Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI _____
3 4 5 6 ; 7 8 9 10 11 12 13 14 is 16 6 36 66 96 Degrees 216 246 276 306 336 330 360 Deglrees 96 126 156 60 86 190 120 150 180 210 240 270 3-00 1WELD Data Noz. Loc. 0 30 0.26 0.26 0.26 TInches 0.26 0.26 0.26 0.26 10 .26 0 .26 0.26 0.26 3 22 Inches PROFILE Noz. End 0.26 0.26 5 42 5.00 4.38 3.78 3'43 3.82 A4.43 5.10 5 61 5 66 1.71 Inches MAX. 3.22 3.38 4.33 3.73 2.76 2.27 1.99 2.39 3 00 3.75 4.50 4.70 Limited Scan? (YIN): n MIN. 1.71 1.83 120 ,de gl with an axial position of 4.32 , Measured Thickness: 0 ,6 - t h* taof Comments: W/ ' Date: Date: 9 12 7 g
-/', Analyzed by:
Analyzed by: -L 7'j (. 9/24/022:37 PM Nozz 14 Page 1 of 2
Z1 Zo9e68d -" LýI1E4OI7LZZON ?QIV7ZI6V'I zc:z 00t
- S.D.
- 79
-----W UUMIUV WWN 11UU.11 1, UW nuuwwnMri.iMrmuusmm n 1d~n~mnunn ~ gfiuuuauu amnuanwnu
*----------------------- ----------------- I 0 *9
-- ------ I-------- -{ ----
----------------- ----------------- ----------------- ---------------- ---------------- 0*
9
--- -- ---s';
- - - (4
------------------ ------------ ----------------- ---------------- ---------------- *G96 ok O*
-- - -- 4-- --------------- ý,,
----------------- ----------------- ---------------- ---------------- 0',.--- - --
----- -- 4
-- - - --- - OW 4-- --. -
- z. r---- -
- -- ,- -- xx94t
------------------ ----------------- -----------------: ---------- ......
- 4;;'*-
--- - -Po~z.
-:nt
---------------- --t -----7-- 4--- ----7 ---
--7 II
- .9*C
---------- -- 1/4-
-,------------- ~~--' NV I
SWQIVINWtdW 0
'I,
*?~Y!¶V?ý'
2-i
.--. ,.jI; ZMVZ {: rN' .4
- 24
* - - I A
FRAMATOME-ANP NONDESTRUCTfViF IYAM!MA*Twtl nr1*tr=*r* Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09
, P0 NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 A Reactor Head Penetration zA*,A*t A*=P Ultrasonic Examination Data Sheet Customer: W MrC. , Plant: p.,-/-- Iec.* Unit:
Penetration No.: -Z-4 A5 Procedure: 5q- 15/- ioO"-6e Equipment: Description VH# Cal. Due Date SN#
.Tomoscan " 1,/'/o. 2..ozq 16 Channel P/R N/A NAI, ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version3-4 -s.5 Cable Length: SCO Type: Ze.- 1-4-q # Intermediate Connectors:
4alibration Block: (o/Jq3oe/ Calibration Setup: Scan File No.:. A zv._ -o.(t.I I Initial Calibration File:.r oZ.,o.'( A M*,.,'I-. e'*-
- Final Calibration File: c nm.wro ,=eurnf r 7.7-3-.4 Scan Start: Z = -o.1, Scan Start: 9 = -* ' Scan Stop: Z = .. ol1.O Scan Stop: 0 =3*"
Index Increment: 30 4 Channe
/
Anale 5"0 ° Serial No. 5oc..lG p.( Comments Results.
- r) Recnrriable Indicatlon* Leak Path Detected "Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed by: Level: ' Date: Reviewed by: ,, - Level: -- j- Date: /'.,/' 2-.
/
TYPICAL DATA SHEET FIGURE 5 foloz, Page 31 of 32
"A CRDM Nozzle Ultrasonic Examination Data Sheet PRAIAATOMS ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: -15 Procedure: 54-ISI-100-09 INozzle Dimensions: (im) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg*): 289 End of Noz. (in.): 0.37 Probe Serial No.'s: Ch I S0416CN Ch 6 n/a topI 'Ž'~ de~i~,~ 'U Pi2 n/a Ch7 n/a r~ ~ ("* -. ~Ch3n/a Chi8n/
Circ. Scan Start:j -5deg @ -0.7 ,, Stop: 365 Ideg @1 7.0&801' Setup: 3 Ch4 n/a Ch9 n/a Files: A2268_10.15.41/10.51.38/11.30.50/11.43.10 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angie TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) '_ (in.) (deg.)
--- (In.) Ratio Orientation_ Min Max I NRI - -- _ _ -3 -4 -5 -6 _ -7 10 11 12 13 14 3nlye 16 by:___ 9__ A Date:
17 169 199 229 259 289 Degrees 349 19 49 79 109 139 Data Loc. 289 319 300 330 360 Degirees 150 180 1210 240 270 0 30 60 90 120 0.37 0.37 Inches WELD Noz. Loc. 0.37 0.37 0.37 0.37 0.37 0.37 0.37 0.37 10.37 0.37 0.37 Inches PROFILE Noz. End 5 80 5.65 5.33 4.82 4.28 3.64 3 21 3 21 3.17 3 64 4.22 4 82 5.33 1.50 Inches MAX. 4.28 4.20 3 83 3.04 2.21 1.76 1.67 11.93 2.08 3 04 3.60 N MIN. 11.50 248 degl with an axial position of 6 03 Limited Sc'ant (YIN): Comments: Measured Thickness: 10.631 1 theta of
... Analyzed by: /Dae
(*Date: /..
-'*....by Anayze 9/25/027:49 PM Nozz 15 Page I of 2
-C It; 22 >2 FRAMATO-ME ANP
'~ 4¶t%~j~ $
'.4 : ~'-
4
~
40 r I r 14. --------------- ------------------ 14.0,4 ------------ 4 13.5 "--- - - - -- ----------- ------- 44 4 ,ý," . 44Y4444 13.0",'-' a - -- - -- -- - --- -- -- - -------------------
---------- 7 -------
------------------- 44- -r ' -- ' ------- z 4 4 4 12.5 4 4--- -- -- - -- --
----------------- , , ., _., I 12.0~ ------- ---- 7-4 11 5 ,1 _ ---------- 7--
11.0' 4.444444444k-- ------------------ ------------------- - - - - - - - - - -4L
- - - - - - - - - - - - '-t---t-.
10.5 ------------------ ------------------- 10.0 ------------------ ---------- -- --------
- -- -- - -- - -- -- - -- -- - -- - 4-54---'--4----------
9.5 -------------- U,--------- ------------------ -------------------
------------\ý_
9.0 ------------------ ------------------- 4 4- 4 ------ 4----4 4 8.5 ------------------ ------------------- ------------------- 0, 0 8.0 ------------------- -------------------
'C U 7.5 ------------------ ------------------- -------------------
C 7.0 ------------------ ------------------- ------------------- 6.5 ------------------ ------------------- ------------------- I 6.0 ------------------ ------------------- -------------------- 5.5 5.0 ------------------- 777ýýý 4.5 M 4W4WR4Mnt4fl4444i4444 f 54flC4i4M4WPUWflfl44nUI I 0*flUU4WNiSSUShiU4 AdSM$UWduuuuunnmauu. Li iemuua4mun4erneuaevau, I. I.ntAuid.4dh44i44.4.ahddUd.444. A- uie.see.nee .... ARon I Iffi'momm gm&m 4.0 3.5-4 4--- -- -- - 7:7777___;<
----------------- --------------I----- 4 4 44 3.0 ----4 4--- -
4 --- 44-- 7 ----------- 7 '444444 Downhill 2.5 4 4 4 4 4 - - - - 2.0 - 44 4 4 44 4 4 - - ------------
-------------- 7----- Sldez 1.5 4 4 -- --
4--
- - - 4 4 4- - - - - 4-- - - -
.................... 4 4. 4444$
'.4(44.
10 4 - -- ----- '-- 44444444444444444444444444444444444444--'+--'- A
-- 4----- -------4--------.;A 46..
V 0.0 4 4 1 44 4.4. 00 4"~ ' 1'50 -k 00 5.
- egr -300
- e-<.
-2 -3 -4
-6 -7 -8
-10 -12
-13 --- 14 -15 -- 16
-§i Noz. End ~1 N""a"01Uphill / Downhill demarcation 7:49 PM9125102 Nozz15 ChartlI Page 2 of 2 1%
9C.. FRAMATOME-ANP NOND2STRUCTIVI* FXAMllATnt'lJ I=trtl I Remote Ultrasonic Examination Of Reactor Head Penetrations IR PROCEDURE PQ NO.: PQ-100-1, NO.: 54-ISI-100-09 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration rRA.MAT.CME AMP Ultrasonic Examination Data Sheet Customer: W M C. Plant: - Sek Unit: Penetration No.: /ICI Procedure: 59- lS/- 'oO-0'j Equipment: Description VH# Cal. Due Date SN# gTomoscan I I /-/03 16 Channel P/R N A NIA 1/,A ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Versionq3*< 53. Cable Length: - Calibration Block: Scan File so.: A.- A6 90' 0/19q30'/ 8, b.oo. Type: .2.- i-4-q # Intermediate Connectors: Calibration Setup: Initial Calibration File: Az24.8-.o'At. I I Final Calibration File: , pRz.pawm, Scan Start: Z-. Scan Start: = -5 Scan Stop: Z = 7%.? Scan Stop: = 3L.S* Index Increment: 30 Channe Angle Serial No. Comments
/
Results: (!ýo Recordable indication-s Leak Path Detected Axial Fla-ws 0e ec ed
- Circumferential Flaws Detected Comments:
o-[" Aoz/e e. ,,,, ,,W44L Su. 4 C. Analyzed b,: Level: 7Z7 Date: '! Z*0 Reviewed by: -. eve!: 7 -.-Date: 1612 oZ._ TYPICAL DATA SHEET FIGURE 5
/L\24 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: 16 Procedure: 54-1S1-100-09 Nozzle Dimensions: (io) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 330 End of NoL.( In.): 0.64 Probe Serial No.'s: Ch i S0416CN Ch 6 n/a
!~~;~~§I~I I~I~t~: ~ d~; C2n/a Ch7 -n/a Circ. Scan Start: J-5deg @1 -0.7 " Stop:l 365 Ideg @l 7.97(' Setup: 3 Ch4 n/a Oh9 n/a Files: A2268_08.00.05. A2268_ oS,.SI.53 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (In.) (deg.) (deg.) (In.) (In.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 23 ,,__
4 5 6 7 9 10 11 12 13 14 16 17 Data Loc. 330 360 30 60 90 120 150 180 210 240 270 300 330 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 0.64 Inches MAX. 2.96 2.92 3.43 400 4.77 5.24 5.48 5.42 5.17 4.61 396 332 296 Inches MIN. 1.35 1.29 1.64 2.09 3.18 3.79 4.17 4.12 3.72 300 200 1.42 1.35 Inches Comments: Measured ThIckness: 0.62 @ theta of 34 degtwith an axial position of 4.84 Limited Scan? (YIN): n Penphery nozzle. Distance to end of nozzle is 0.58" downhill side. Nozzle also has chamfer on ID surface. Analyzed by: *Date: I 2 !z. Analyzed by: Date: 9/2510211:52 AM Nozz 16 P;ige I of 2 j
i%4;4-jI * '5t1.t.s,
-, - ~ ',Vi,. 't ' . ' .,.
4.0 . ' "a. ,'A . ",, ,+ff<',::-' . I.w% ',=
.,..FRAMA'OMEANP 2("~,
A.'.'.) - :; ' Q , ,-' N.l1
,. Profile' ' . .
.,_,------- ,,,-,-, ; .--... ---- --- . . ...... 1-
..I --- - -- ."*,
1 244-
.5 °, ..- - .. - 4. -4 r. ' - -
- if',
.4
-........... r . '-,
12.0'1,, I - - - - - - - - - - 'V.
'120 -------- ---
1 1.5 -- - - -- - - - -- --'--- -- - --- - - - - - - - - - - - - - - -- - - - - - - - - - - - -- - - 111.0 ----------------------..------------------- ------------------- ------------------------------------------------....... ........... 1 0 .5 -- ...------------------- --------------------... - -- --- --. *... ------... ----- 10.0 [. ... .... 9.5 Z Z Z Z Z Z Z Z Z ZZ :Z ZZ =:ZI...... 8.5 - -------------------. 7..5 ...................--- ..------------------- .---------------- .--- .-----------------------------------------------....... 7.0 .. . . . . . . . . . . . . . A
... --- .. --------------- I-----------
6.5 ------------------- .................- ---------- ,--................---................ ---................ -.--.......... 6.0 ------------------- -------------------- 5.5 5.0 4.5
---- -------------- - I -I - -LD MIIUNUVU i[dl I ME i ut u fm n sn n L nfleigeeef lheulnnf ig leirn iAI mnInlni.lrlm ml" I i. iis.
4.0 ----- 3.5 ------------------- ----------------- --- -- -a.. 3.0 .. .. . .4 . --------------- ---------------------- Downhill 2.5 ------------------- ------------ -- --- .......... 2.0,. -------------- --------- ------------------- ---- 1.5: 7-7-1 7----
------------------- ------------------- ;?',
ý. I *f l'.
----------- 1 ----------------------- - -- '9" 0.5 .. ; : 7... I 1 11 .
- 4 " 4, 002
",200i ' " 250':' 4
-2 -3 -4 5 -6 -7 6-8
-9 10 "-11 12 13 ---... .14 ,15 --- 16 inNoz-End -- 1 -- ,=IUW"Uphill / Downhill demarcation 11:52 AM9I25/02 Nozz 16 Chart I Page 2 of 2
.ri Cu~
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE I Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A Reactor Head Penetration FR- UAOME' AMP Ultrasonic Examination Data Sheet Customer: W MvC- Plant: 8.-
&eAr- Unit:
Penetration No.: /7 ' Procedure: 5q- ISI- .1O0-c Equipment: Description VH# Cal. Due Date SN# gTomoscan " "1/1 3 .o1q 16 Channel P/R NA Nt/.A/A ACCUSONEX Data Acquisition Software: Version 622.5 ACCUSONEX ""'DataAnalysis Software: Version* .7. 97,* Cable Length: 9' S Type: 2- t4-q # Intermediate Connectors: I Calibration Block: "(,o/ 193o67/ Calibration Setup:
'can File No.: .4 ,?2 b7-,-, 2.9 Initial Calibration File: +,Pvgq'-/- 1 ,,O*
19 *, 6"*-- 2. a-5o" Final Calibration File:L.zJu', ft-otsqgc 74 ,r.41, Scan Start: Z = -. 7 "Scan Start: 8 = ' Scan Stop: Z = ,79Scan Stop: 0= Index Increment: 30 Channe Angle Serial No. Comments
/ 5"°- e Al
/
Results: Ecordable Indicationn Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: lAnalyzed b~y: 6,7 ,40- Level:
- Date: 7-2-O1Z.
IReviewed by: Level: .. t~Date: / 9O TYPICAL DATA SHEET FIGURE 5 Lk dct-2$tc; Pace 31 of 32
0 A CRDM Nozzle Ultrasonic Examination Data Sheet FRAMATOMM ANF* Customer: Nuclear Management Corporation Plant: Point Beach jUnit: 1 _ Nozzle: -17 Procedure: 54-ISI-100-09 Nozzle Dimensions: (ire) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg*): 330 End of Noz. (in.): 0.48 Probe Serial No.'s: Ch 1 S0381CN Ch 6 n/a xial n *%Sf*'>.J. tb:J... Ideg\@ .,i ,-";Setdp';,L.. Ch2 n/a Ch7 n/a AU,~ k Ch 3 n/a C118 n/a Circ. Scan Start:[ -5deg @L " Stop:l 365 Ideg @1 7.781 Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_20.00.29/A2267_20.25.05 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial uAdlsted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Mn Mi Max Max Total Mi Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (dog.) (in.) (in.) (deg.) (in.) Ratio Orientation Min I Max 1 NRI _ II_ 2 ___
-3 -4 -5 6
7 8 10 i 11I 12, 13 16' 17 240 2 7 0 i 3 00 3 30 Degrees' 90 12 ISO,0S 2 10 ata Loc. 330 3 0 30 60 330 360 Deglrees
'D 210 240 270 300 90 120 1' 9 Inches Noz. Loc. 0 30 60 0.48 0.48 0,48 0.48 WELD 04 0.48 0.48 0.48 0.8 10.48 0.48 0.4 8 1 .8 3 98 3 76 Inches PROFILE Noz. End 2 6.18 5 .88 5.24 4 61 39 4.11 4.68 5.31 59 2.16 1.7 9 In c he s MAX. 3.76 6 4 .68 4 .2 8 3 .43 2 67 2 .7 1 3 52 1 .4 N
,M IN. I 1.7 9 1 .910 w
alith an axial pos of ition 32 6 Lim ited Scan? (YIN ): 1 A-theta of 18 11 de Gom ents: nm Measured Th c n ss: 10 64 4' ae Date 9* OLOZ'/ Analyzed by: SAnalyzed by: " -7* U) 4 (:30- - W-9/251029:05 AM Noz 17 Page I of 2
Z JO1 abed ý JJE4Q L ZON ZO19E16V'JV 90:6 A4.. ~ ý,
*,JfA.'~ 00
". t; ," Aý., A
-------W.-6 I-,- ,+/-ntt Inanaunn n q u WMý q
,n
----------------- ýZýý
----------------- ------------------ .................. I .................
------------------ A-C
--A--- A:
A-- - - A - - - A-
----------------- t-r--------- ..................
` ,¶I A I
, .... . t I~
A~t A~?A
~th
-- - - - -- - - - ----------- 9 4,V A 9AT A
Oil
~
6
'i J
.... A
.. .... A .. ----------------- "m A' - - - -- - - umvmm O
. .. A....'...
--- AA-t--'-6'----' ----------------- '--------- I----------
A..
.. . A
-- - -- A '
---------- -- 6--*-
------------------ - A--------- ---------------- 'A AA6 5? A-A., 'A A lAt AAAAA,,j';
6, '
- AAj AA1 ,AA'AA UIA Ct A': A A"A 5
Ci L.. FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE t Remote Ultrasonic Examination Of Reactor Head Penetrations P PROCEDURE NO.: 54-iSI-1 00-09 PQ NO.: PQ-i00-I, 54-PQ-1 LO-21 3,14 an~d 5 A Reactor Head Penetration PRI*AMATOMC AXP Ultrasonic Examination Data Sheet Customer: M IC. Plant: - 13e,,-. Unit: Penetration No.: "Procedure: 5'-/i1- oOD.-O'> Equipment: Description VH# Cal. Due Date SN# Tomoscan' I/1 11"10 2o-C,zozq 16 Channel P/R NNA NI I I1/A ACCUSONEX "' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version -. 7.'S , Cable Length: gol Type: Z&- 1 # Intermediate Connectors: I Calibration Block: d~o//q3o / Calibration Setup:
"tcanFile No.:. 4;7'2.;'7 /J7. 0B"S Initial Calibration File: S7:226.'-,
$'.OV/
Final Calibration File: co.-WVC' PZ-raMA . Scan Start: Z = -. 7 " Scan Start: = -,s Scan Stop: Z = ?F" Scan Stop: 0= Index Increment: 30 4t Channel
/
Angle 5"oL. Serial No. 0* .) C.*A.) Comments Results: REEF~e-cordable Indicat: Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: T Date: - y ,2 Reviewed by: Level: -Date: lo.q-02 7'" TYPICAL DATA SHEET FIGURE 5 LA CRSV2 51 0 Page 3I of 32
A FR AMATOM E ANPI CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: I Nozzle: 18 Procedure: 54-1I1-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 142 End of Noz. (in.): 0.66 Probe Serial No.'s: Ch I S0381CN Ch 6 nla AkiahSca'rn- Wit, S' n/a Ch7 n/a Circ. Scan Start:[ deg @ 07"
.Th ~ ~~ Stop:I 365 Ideg ~ @1 7.76' ~
Setup:[3 ~ ch~3 Ch4 n/a n/a Ch 8na Ch9 n/a Files: A2267_18.17.08/A2267_18.56.20 Cal Block SIN: 60119300 - ChS n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI . . ." . 2 2 4 7I; 8 9 10 11 12 13 14 16
-V
-7 17Data _ Loc._ 142 _
172 202 _0 - j - 232 7 262 292 322 _352 22 52 82 112 142 DegreesI PROFILE
- _w _ _,,_ _
WEL Noz. Loc. Noz. End 0 0.6 30 0.6 60
,6 90
-__-o_.
0.66 066,66 __ 120 0.66 150 0.66066 180 0.66 210 0.66 240 0.66 270 0.66 300 330 360 Degrees I c e MAX. 3 41 3 63 4 04 4.59 5.22 5.73 5.94 5.83 5.33 4.76 14 09 13 61 3 41 Inches MIN. 1 68 1.77 2 05 2.75 3 63 4.24 4.63 4 46 3 63 2.93 12.27 11.73 1.68 Inches Comments: Measured Thickness: 0.63 @ theta of 305 deg with an axial position of 6 99 Limited Scan? (YIN): N Analyzed by: .,l_ 1*f _._Date: 7/"Z5- 0--. Analyzed by: ,aRDate: 9/25/029.04 AM Noz 18 Parle I of 2
,, " C'\
'1 .,; '+" + " .. +.,'"t* ;I ...."_. ..j..-
ANP"..... .. ....
-..... 4L':
-4t2' ""+ + ,
1' "44" Nozzle " 18 "+3/4"','"
.... Profle... , ., .',
, ',*+ -'" *
" + %
* , . ' Any 1*1
,.. ....... ........ ... .. '... .,.......... ..... ,.+.,.,. " .. .. .. 0 11 . -' " " - ,-1 ,- -.--------- --- .... .
A A.... S m - , - ' ., , 4. 13 "0.. 4 ...............-................
,--------*------------------- I..... ... .
125" 1--- '-- 1 1.0 .. . . . .. . . . . . . .. . . . .. 1. . .. . . . .. .1. .. . . . .. . .,... . . . .. . .- . . .. . . . . .. . . . .. .I' . . . . .. .'. t.. ".. S1d0,0 405 ..... WIWIU -,......... nu................. fStN................. i4...........N .. - UII................. .......... IHISUW Ia
...... m........... I ..........
a" 21.0 -i---- --- -- --- - ---- - --- - e 10.0 -...---------- ----------- ------------------------- .
-- ---- ----- 3 4-- -----
7--
*,* 1 . +, . +*+*: ,. 2 0owhildearato Uphill- --, - --- - : --1)-- .+S -
, -- '< --* * -, --3-(0- -- . :*-----------------
7
* --oz--End-
' 7.0
.5 N---- --- ---
. +.. ----------- -------------------------------------------------
f-- 16.5 200...J...250.* ....................... 3.......... 4
................... Downh- i 19.5 .....--- ----- ----- -P-age-2-of----2 - -.......-.- ---- -------- .-.------- -- . ..
"+ -- 4.5*,---- - - -4.5--- -- -- ---- -- ---2----- *4 4 *,
-------- -o------ ------- ----7 --
------7
- ~~~~~~~---
- 4. ---------
5----- --------
+-- 3-.. . ------ --.-----
' " p ll ow hl e act o ... .
i J *- --------- .. .. Page..of.
-M/ ----- --------- --
- -- 5
9C , FRAMATOME-ANP NONDESTRUCTIVE EXAMiNATION PROCEDURE Remote Ultrasonic Examination Of-Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 SPQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Ak Reactor Head Penetration F;ZAUA-T,.= A Ultrasonic Examination Data Sheet Customer: ", hi .. Plant: Io,-%- er,~k Unit: Penetration No.: t9 Procedure: 5'/- IS/- Jo0-Orl Equipment: Description VH# Cal. Due Date SN# rTomoscan " 1 ozzq 16 Channel P/R N/A tA4,AN1 ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEXj* Data Analysis Software: Version 3W8* & .5 Cable Length: Sl Type: Z&- i-'-q # Intermediate Connectors: I Calibration Block: ,o/)q3oEi Calibration Setup: 4Scan File No.:. A zr_ 0T. Z.0 Initial Calibration File:4z2(.9.o.,,1q.-3 A .vw7,q - Ol. S1 . 3s Final Calibration File: e.jr,,wucD rp*,-vOzwA Scan Start: Z = . "." 7.Scan Start: 8=-- Scan Stop: Z = :7.78 Scan Stop: 8 = 7t,,S" Index Increment: 30 Channel Angle Serial No. Comments 0 5oi-. so -qC
/
Results: (.ro Recordable Indications Leak Path Detected Axial Flaws Detecte Circumferential Flaws Detected Comments: Analyzed b'y: Level: Date: (eLo0z Reviewed by: Level: _-Date: io/ Z TYPICAL DATA SHEET 82 ,.l'L* FIGURE 5 Paae 31 of 32
0 A" SRA MATOMME CRDM Nozzle Ultrasonic Examination Data Sheet Ar.jF= Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - Nozzle: - 19 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 314 End of Noz, (in.): 0.41 Probe Serial No.s: Ch I S0379CN Ch 6 n/a 'AYai sc -sl'rt:*-. d l' -, t.* , I " ,. ,..s h, "Ch2 n/a Ch7 n/a i , -- . , . " .. Ch3 n/a Ch8 n/a Circ. Scan Start:I -51deg @1 -07 1 Stop: 365 Idog @1 7.78 Setup: 3 Ch4 n/a Ch9 n/a Files: A2269 09.30.20IA2269 09 51.35 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI ** 2 ' 3 4 5 6 r7 8 9 10 12 13 14 15 16
`17 Data Loc. 314 344 14 44 74 104 134 164 194 224 254 284 314 Degrees WELD Noz. Lom, 0 30 60 90 120 150 180 210 240 270 300 330 360 Degirees PROFILE Noz. End 0.41 0.41 0.1 0.41 0.41 0.41 0.1 0.41 0.41 0.41 0.41 0.41 0.41 Inches MAX. 3.39 3 65 13 91 4 44 5.18 5.49 15.83 5 73 5.27 4.59 3 96 3 56 3.39 Inches MIN. 1.81 2 08 12.29 2.88 3 43 14.00 14.50 4.15 3.50 2.91 2.10 1.92 1 1.81 Inches Comments: Measured Thickness: 10 617 @*theta of 2401 denl with an axial position of 6.31 Lim ited Scan? (YIN): n Analyzed by: -" ._ Date: 6/.t,
- Analyzed by: -J7A- Date:
0ý 6 ocj4Lb-o1. Page 1 of 9/26/023"42 PMa No=z19 o 2
ZJO Z GLed I. P2e4o UL ZZON Z019Z1/6V1d IV; 4 l ,- #,,.i *4> 1 Ul'.
ll u - r - ';, . .~ I4lI I'.. . ... .. . 4.. , . .4 ... 4 ...4 . . .. - .. I 4 4 5 7--------I------ 4- -- --44 , ~4<
-'-.-~?.t~
-:-- -----'I,'..- ---- 4 ----- ----- 'k --- - - - ')'-4~ - -v t4
-4 . . . I - .. .. . . . - .. ............ .. . . O- . -- Q <
--- 4....4..... - - --. 0'0 IIlJUAMO ------------------------ .......... - "-----
. .. . . . . . . . . . . . . . . ."-T . -.--.-.-.- - .-.- . .-.-.-
-.-.-. -.-.-..-.-.- .-.-. . ..-.-. .-.-. . ..-.-. .-.-. . ..-.-. .-.-. -O- -.. .. ..-. . ..-...-.-.-.---.-.-
' ---- ----- ---- : ,, 7 t t 4 ----- ---- ------ ---------------------- ------------------- ------------ -- -
W4.' 4
& ~ ---- ~~-- ------- --------------------------
-V - - - -- - - - - m u o a *
"" ' *-'------------- - - - - --- - - - - - --- - - - - - - - - - - - - - - - m -- - - - - - - - - - - - - - - L A,
4VN. 14 -17
--- --- --- I........
-_------.-- -- --- --- --- . .... ----------- ,----"-..... "- * ------- . *, To. +t+" "
I..t - - -.-.. .-- . .... ... -- . . - . - -- . ,t A > A !'
, X" ' * $ ,; " , - " "* . . . - "'-. ... . "-.. . . . .. .
.. . . . .. . . -.4 , "
'"b'&
ttff 9jn 4' 4 4 44 ¢' 4 .4 Z. r'v 1 f_.4j4 ,'
- 4 4 ri, 4 4 7
~l%rs 4& !. Wia*, :'lil :,/-,
-W N~U.: MA-IUU-1, a44'L-tU-MZ,-, 4 and 5 "A1/4 Reactor Head Penetration r-RA "&T,.M AMP Ultrasonic Examination Data Sheet Customer: 1* IiPlant: 6 xj 8 e4.ekl Unit:
Penetration No.: p0 Procedure: 5/- I-Equipment: Description VH# Cal. Due Date SN# gTomoscan Z-/'s/c~3 2.O2.sq 16 Channel P/R. N/A N,1A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX MData Analysis Software: Version Y.T oV Cable Lenglth: S; C), Type: 26- i-,,- # Intermediate Connectors: I Calibration Block: '6.o/),3o*r, Calibration Setup:= I Scan 2 File No.:J7a.qrTz.I
- J7977.r*, ,f2
*49-It..-. sr.ol.j-..d.o., It. 79,.o Initial Calibration File:4:226?-W v.
Fn1Ci~r~tn 2P.2? Scan Start: Z =- Scan Start: = Scan Stop:- Z --= "Scan Stop: . Index Increment: 30 Channel Angle Serial No. Comments Results: ecordable l Indications Leak Path Detected Ax-a Dm c. Circumferential Flaws Detected Comments: Analyzed by: . Level. 2 Date: . I Reviewed by Level: I Date: /-'. o .. I
/TYPICAL DATA SHEET FIGURE 5 i
ý CkViD-L Page 31 of 32
I' A A KAAr.A A CRflM Nln77l I lhrcnni,. ,a..arnuujii
- . . vm IJaLO JIIL Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 20 Procedure: 54-lSI-100-09 Nozzle Dimensions: (1A.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg:): 295 End of Noz. (in.): 0.25 Probe Serial No/s: Ch ' S0379CN Ch 6 n/a SP d f *i,; Ch 2, n/a Ch7 n/a AM. 9 ~ Ch3 n/a ChB n/a Clrc. Scan Start: -51deg @ -0.7 " Stop: 365 Ideg@ 7.76 Setup: 3 Ch4 n/a Ch9 n/a Files: A226915 53 41117 06 3917 09 37117 43 31118 02.35/18 34 30 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (In.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI '_,
2__ 3 L 4 5 6 7 9 10 11 12 13 14 15 __ _ ____ 16 17 Data Loc. 295 325 355 25 55 85 115 145 175 205 235 265 295 Degrees WELD Noz, Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Inches MAX. 2.90 3.12 3.62 4.01 465 534 5.50 536 4 87 4.21 3.58 3.26 290 Inches MIN. 1.16 1.38 181 2.25 308 391 403 3.79 3.16 2.51 1.97 1.36 1.16 Inches Comments: Measured T"hickness: 065 1 theta of 282 deg with an axial position of 5671 Limited Scan? (YIN):_ N Analyzed by: Date: -2C-o "L.-- Analyzed by: JA Date: 9/26/200210"41 PM Blank Clrc Blade Data Sheet (2) Page 1 of 2.
SJo Z 86ed I. iB43 s1xq3698]d-eqoJdopejqsn OOZI/9gI/6vd WM:OL
,xp
___uoj*eoejwep Il1qutAoa 111dn L- PUA ZOfN,--- "/ S9L - ". -,.----- CL
-- LLL- OL- 6 98 L 9- 9-7 Z-'S a'5'-S--' ".~'~ .. >7 I-l OO !8 -. - ;. ,i
, . , ,,v',
-t2......... i _- L_ L _ " Os 0 ,
...........-....................--.-..-- 7.--..---..-.....
77.. .......
.. .... . ....... I... .-
... . .. . OPI .... .. ..... .................... ........ ..... .................... . . ...................... . ....... ... 0"7
.- ---- - -.. . ...............-+........... .... ................................ - -- - .-. .* ....... .... .......-....
. .................. ........ .... . ...... . ... . ................................. .......................................... .............. - . _-....,. .0
... ..... ........... ........... ..... ..... I..................
...... I.................
S-. -............. .... .. .. I.. ... . ... .. . ..... ....
- .4- -- - - .:-.................
.. ...... ............. . . ... . ...............- ,. . ..... 0.,,
* .',.4**;'*.
"'3' ..- -* - 4;* }*
- " - -*"* 4 T' - -'* - - -. - - . l" -... . ...... ... ...- ............-.....
l"'............... .-
""';..........l
.. ....... .. * .. 9-1*
S 6
. . . . . . . . .---..-------- .7-.------..-.-...-..---.. -
-11 A'- -.-.--.- ---. --.-------.. .... :.-.-----A.-----0 A... - ... . ojW, I
, T7 7774 .... . .......... . . . .......
-,,,, +
44*+;+'*J*.* ++.,,4 .;. .,t ..+.( +.:.+".,++_.,.+ 0 Iv f,, ..... ilJ,O~ OZ elzzoN ,, +-; - -,- .. , .t';, *'"t- ,:-*,. ..... t" - 44' I' 1 Lit 4 tL2 4 4 42& 4 OK. r,. c, -4. 'I 4 AM Ž~~C;3 Y ~ ~ ~C~' .. 44 - - '-yau.. :~" 4 t-"~-'V - .7 re,-$ ---. I ;,-y+. Oj ',I'J9 d 4 or,.I;rN *M,. ,-.t'" dN,,ab*Io+v.g.t-I r , .." K (--Ii'
- - a."-.
CuZC FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE L-AZ. Remote Ultrasonic Examination Of Reactor Head Penetrations P PROCEDURE NO.: 54-ISI-100-095a PQ NO.: PQ-1 00-1, 54-PQ-1I00-2, 3, 4 and 5 1kReactor Head Penetration tRAMA1WEMI AMP Ultrasonic Examination Data Sheet Customer: M IYc_ Plant: ,-L 8eArkj Unit: Penetration No.: ZI Procedure: 59- 1is- .0-ey1 Equipment: Description VH# Cal. Due Date SN# gTomoscan I/z,1.3 16 Channel P/R N/A N1 ACCUSONEX' Data Acquisition Software: Version 6'.2.5 ACCUSONEXm Data Analysis Software: Version . g: 7 . Cable Length: GO' Type: .'- ri-, # Intermediate Connectors: I
.Calibration Block: g.o//,3061 Calibration Setup:
Scan File No.: -,h 0.o5 ..-. ' o Initial Calibration File: . .,Z
,44q.- /.
Il- WO. Final Calibration File: p('e 1ogajw 15j, Scan Start: Z := Scan Start: e =Scan Stop: Z = -. C,! Scan Stop: e=03. Index Increment: 30 I .Channdi Angle Serial No. Comments I j. Results: tNo Recordable Indications "* Leak Path Detected SAxial Flaws Detect-ed Circumferential Flaws Detected Comments: Analyzedb: Level: Date: rReviewed by: 4 ,..... Level: J Date: / -/y .. TYPICAL DATA SHEET FIGURE 5
ý -01110V Pace 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - _ Nozzle: .21 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 312 End of Noz. (in.): 0.22 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a xiiStn\f ',u S et~ 0:~'in Ch2 n/a Ch7 n/a
- iet~f ~.E.. ~ ~ ',1-;,*, ,.~n/a Ch8n/a Circ. Scan Start: -5 deg @ -0.7 I" Stop:I 365 Ideg @c 7.78 Setup:I 3 Ch4 n/a Chg n/a Files: - A226914.50.12,_14.10 46,_14.00.03,- A;q.fl,:(,:p.%7,Cal Block SIN: 60119300 OChS n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI
-3 2 _ -4 -6 -9 10 11 12 13 14 17 Data Loc. 312 342 12 42 72 102 132 162 192 222 252 282 312 Degrees 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc.
PROFILE Noz. End 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 Inches MAX. 3.32 3 45 391 4.52 5 03 5.55 5.73 5.59 5 27 4.57 396 3.41 3.32 Inches MIN. 1.57 1.70 2.18 2.73 3.54 4.24 4.55 4.50 367 280 2.10 1.70 1.57 Inches Comments: Measured Thickness: 0.653 @theta of 302 deg with an axial position of 5.59 Limited Scan? (YIN): n Analyzed by: Date: t,/& ,- _, Analyzed by: Date: 9/26/025:54 PM Nozz 21 Page 1 of 2
Zo 10ZQ~ SljetIo ýZ ZON ZOI9ZI6N~d V9g:9 uo1ea1ewep IIqUMOa I II!Lldfl PU3ZN 6 9ý- 9- 9-U' L c
'4' 4444444 4\.444, - 'P 4.44444 4444 4 -.
.4'44 4444)4.4 444, 44,4 444444 4 44 4 4 44.444. s 4 44. I44~
44 44!
,,z 049 4 00V44 4.44, 4 4 4,4 444444444 444 4
-------------- I...... -- - - -- -
4444
- ý,4, .... ....
4444 I-444 4---- - 4--4
.44444. 4444444 444 444444)444444444.4444 *44 . . .. . . ....
------------------ -.. -7 ----------------
.4-- - - - - -
- -- --'4 *---44-444
- - - - - 4 - -4 07 97 liIqumoa 444'44 44444444
- - -444----
---- 4 OT 4444444444444
-- -444--- 4-40044 44444444
,,UU4NUIUA.U44U
.. maI~
,,~lU4N4TIIEA Mmmin~4UUIh 4-n~UuIII~U4U~EU 0IUUA1IEmul'm 9.9
------------------- -------------- 0,9
'9*
-------------- O*L GL
------------------ --------------- --.-- O's
-------------------- G's6
- 0'6
------------------- - 90I6
.0*14
- - - - - 44 44-- -
- Totr
---------- I--------
~
- - - - -4 I4- - - - - - -
-- - - P- - - . '- '
~~~~~~~
4~ - ~-,-44 . 4-4-.- - -~- .-.
-'-4
;4
- 4 7, 1 ---------
1 "4. I4 44 44 4 444 4**4 444 44*4 4 4 4* 4) .44 44.44 4..4
.,,*4444 4444-444
*s...L 4447-
444*44'P* 4.444 4 4444 4,
*44*4 444444.
4.4 .4*4. 444
*"r.:
V4 444. 44 444444 4' 44444 .4,
- '*Z*44 44..,. 4.;44 444
. 2 -
*4 44 4 - -
- 4 ., 2,*'*
- .4-,
01C1 - FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-SI-1 00-09 PQ NO.: PQ-100-1, 54-PQ-100-Z 3,4 and 5 Ak Reactor Head Penetration FAWAtME A1NP Ultrasonic Examination Data Sheet Customer: Wm, Plant: &,y.k.Unit: aerkI Penetration No.: Z -- Procedure: 5q- /-/- DO-0" Equipment: Description VH# Cal. Due Date SN#
.Tomoscan "
16 Channel P/R N/A NIA "1/A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3-" ?..? Cable Length: Sol Type: -2..- t-q # Intermediate Connectors: 1 Calibration Block: &o//1q3oD/ I Calibration SetuD: I Initial Calibration File: , 7z&9-0o0 1q z.,
"IScan File No.:. AA Z?- -i-oc'. rj.s(
2zCoq0,,t-.19 Final Calihratfinn PIl. .Ole,& r_1, M F-C. Scan Start: Z - - o.1. Scan Start:O= . Scan Stop: Z =9 a I(. Scan Stop:8= ,' Index Increment: 30 Channel Anqle Serial No. Comments
"/ 50 503
$ 7-:l c4 Results:(,r No Recordable Indications, Leak Path Detected
- Axial-Flaws Detected1 Circumferential Flaws Detected Comments:
Analyzed by: Level: Date: */ 0/Z Reviewed b y: .Level: -Date: . TYPICAL DATA SHEET FIGURE 5 q0 q-*1.6 101&- Pace 31 of 32
9 A SAdMATrcM A ANIJ CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 22 Procedure: 54-ISI-100-09 Nozzle Dimensions: (iPr ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.'): 331 End of Noz. (in.): 0.35 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a 'A Itdeg@.9*,,* _*al o,, .tJp:lT C h2 n/a Ch7 n/a Fes. "1"'.'7 Ch3 n/a ChB n/a Circ. Scan Start:[ -5deg @1 -0.7 1" Stop:j 365 Ideg @I 8.11 " Setup:E 3 Ch4 n/a Ch9 n/a Files: A226907.45.19 IA2269_05.51.51 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adlusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (dog.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI 2 __ 3 4 g 8 9 10 13 14 16 Data Loc. 331 1 31 61 91 1121 '51 1 18'1 211 241 271 301 331 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 Inches MAX. 3.34 3 30 13 84 4.46 5 01 5 51 15.72 15.60 5.21 4 69 4.14 33666 3.34 Inches MIN. 1.86 1.74 1.90 2.59 3.48 4 07 14.51 4.39 3 87 3.14 2.38 1.977 1.86 Inches Comments: Measured Thickness: 0.653 @ theta of 265 deg with an axial position oFf -:'6.73, Limited Scan? (YIN) n Analyzed by: ie .-_- Analyzed __Date: by: Date: 26
- 0* Nozz 22 Pare 1 of 2 9126/023:58 PM
S* ,.1-",t"s
.~ " "-r'"1'"..t :d ;- * "- > ",,-"' Nozzle; 22 Profile' :
RAMATOME AN7 , , Pi
'!14.5' '-...------'= - "- " = . . . - '... - .--- -- '---"-"-"---"-"-------- .0 135. .*, ~~~~~
.. ' '.---- .. ... ... .."-----'..4, '".. :' 3... "....... '
~---- . "., . . .. . . .. .. . . .. . .. . . .. ".. . '-y.- -"," -" .. .h-"- * ----
* -' *l,-.**
130---------- --- --- ------ 'C 12 0.5 - - - ------ . r- - - --
------------------------------------ -,5 1 -- - --- I 12.0 - -:...----------.-------...--- - - -S [""
455 8.0 .- u------uhaf--ggga---ugu----uuuf--ua
-.-.--------------- ----m uu
.-------------------- ......... sau m...-m .
-------- .---- .--- n-200
--- --- -.-uuurm
-~uuu -ruw 250
-u--
-~nt~~tuM fn -St
-mnu-u-su-u-mt-t- ,
"9 .5 .................. r . . - . . . . . . . . . . -- . . . . . . ...................................-- - - - - ....---- ---.
9.0 .... ..........................---- - ...... --------------.... - .-- 8.5 -.------------------- .------------------- ------------------- --------------------------------------------------------------------------...... --. 8.0 - .------------------- .------------------- ------------------- ---------------------------------------------------------------------------..... t-- 7.4 .5- -- - - - -- -- - -- - -- -- -- ---- - - -- - - - --- - - -- - -- -- - -- - -- -- -- - - - -- - - -- -- - - - - 639 ,5.4
.0-M5 - ...--~PM -~...
- 9/2602
- ---- . . -..-- - -- - -- -- --- - - - -- -- Nozz22Chartl
- ---- - - - -- -- - - -- -- - --- -- - - -- - - -- -- - - - - Page 2 of 2
. .. . . .. . .. . . .. . . . . . .. . . .. . . . . . .. . . .. . . .. . . .. . .. . . . . 4.. . ' . . . . .. ..... .. . .. ..
3 .5 --- i-I*:': I-=- -. 3----.--- 7727 , 3..:.'1 5-6 ----------- --- -------------------------
!~-13..... ----.. -----*
14..1 .. . ... .1 I~~------------ =' ='=1== = p il
--------------- o n il e ac to-----
1-0 ' ... *. 3:58 PM9/26/02.N....22.Chart...Page.2.of.2
I.'- CuW *
.FRAMATOME-ANp NONDESTRUCTIVE EXAMI'NATION PROCEDURE I Remote Ultrasonic Examination Of Reactor Head Penetrations I ~PROCEDURE NO.: 54-IS1-100-09 '
A Fr-A*rame Reactor Head Penetration Amp Ultrasonic Examination Data Sheet Customer: WJ MflC Plant: . . Unit: Penetration No.: TProcedure: 5L1- ,1/- .10-0"* Equipment: Description VH# Cal. Due Date SN# pTomoscan q"-, I ]:L/03 2.o2.gq 16 Channel P/R NA N/.A /, ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3,? &9 3.8 Cable Length: - G Type: I*e.- t-,-q # Intermediate Connectors: I Calibration Block: ,o/l.q3,o6 Calibration Setun: i IA=9C.- Th,3.o/" tcan File z.c,,q-/,P. No.- Az-C.9 -/o.z-&-tW1.1 Scan Start: Z -- o.:-V Scan Start: 0 = -5. G8 Initial Calibration File: Aq-zc,-q ,,o.iq. Z Fin= . lihr
~n Mi"~CC'(Ji ms, . . .. ., , .
INUA.J-w ri~FlAWdf
-JL, Scan Stop: Z = -*. c,/Scan Stop: 0 =
Index Increment: 3. Channeg Angle Serial No. Comments 1 50. 503 7-'Ict4 Results: No Recordable Indication Leak Path Detected Axial laDetured f Circumferential Flaws Detected Comments: AnalRved by: Level: Date: 19 b4 0 Re'viewed by: -Le-vel: -27Date: 1,0/q A l 11-1 TYPICAL DATA SHEET FIGURE 5 Page 31 of 32 a
A I=R AMAT'o IMI1 ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 _ Nozzle: 23 Procedure: 54-1S1-100-09 INozzle Dimensions: (in4 ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 290 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a Axiai.scanazr$sairt. ```*' ai~g.`@1. *1I'-;Stop',I : IdeJ*i--,". -Setub-I, :,= Ch2 n/a Ch7 n/a F~~~W~~s':-,". 1Z~~~ . Ch 3 na ChB / Circ. Scan Start: ]-5deg @1 -0.7 " Stop: 365 Ideg @. 7-961' Setup: 3 Ch4 n/a Ch9 n/a Files: A2269_10.35.11,10.49.58,_11.02.04.11.12 50.11.16 3: Cal Block SIN: 60119300 Ch 5 nla Ch 10 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI - 2 _A 3 4 6
-7 8
9 110 12 13 14 15 16 17 4~~Z 4_ 9_ _ _ _ _ _ _ _ _
;Data Loc. 290 320 350 00-_ 20 50 80 110 140 170_
200__k-230 260 290 Degrees WELD NOZ. LOC. I 0 30 60 90 120 150 1180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.17 .. 0.17 0.17 0.17 1 0.17 1 0.17 0.17 0.17 0.17 0. 17 0.17 0.17 0.17 Inches MAX. 3.43 3.63 14.12 4.79 5 42 5.73 5.77 5 64 5,26 4.59 3.96 3.56 3 43 Inches MIN. 1.93 2.00 2.54 3 36 4.10 4.63 4.86 4.37 3 76 -3.12 2.42 2.09 1.93 lInches Comments: Measured Thickness: 0 617 @ theta of 3101 deg with an axial position of 5.39 ... L'imited Scan? (YIN):, n I Analyzed by: *_. v loZj.oZDate: qiz t.,,o?. Analyzed by: /i Date: 9/26/024:24 PM Nozz 23 Page 1 of 2
Z10 Z e~ed LiPliD CZ ZZON Z019Z16V'JJ yZ:y uoileDJewep Iflqumoo / llqn PUH *ZON. i ýT SL_ CL 6-1 9 i le 2z OZ
,- 2; 937'"
22 '*42
--- 2----
................ 2
- - - - - 24 222-7'.
7 ------- - 422 44 2 2 2i 2 i--- 2, 2j2 22'.22 4 422' L.4. 2,j 4 2 2.22 412.--- >-
-- - -22' --
2-- -- --- 2--- 2---- 2---- 2.-22*--22.2------ 42'2 22 2
*'2222 2222 2.2 2 WIT 2- 42 ----- - 2 -- ----2: 2 24222 2' 2 4 * - -
.t;221222222 22 2 22 2 2 --------------------
if2'Z .,222t.. 2 HIqUMOG .2 2
------------------ 07~
- 42. 2 22 22 222
'22222 2.22 242 097 2 - 222 2 2222222 b~~~~~~~~~~~~~h~~~~~
~i 1--------------------
ik ii i i6fih~1 h*~ rn a u--nnw - --n n
- n - -------------- u kiliS~.n*.j.n C............----
0*9 9.9 0L
------------------- --- --- 2-- -
- 2. 22 42 ..2 ¶4 222 "2 2 2 2 2
4222-- 2......*.......
--- 2 -- ---
2
..2..
-- - - . 2.. 4.
- --- .-5, -
2222.
- 2--
2 22 *2222h -'Z*4.
-- 2--t--------7-2 0*6
---- -- 2--- 2 2- ------------
.. .. . ---------- -4222... -- - - - 2--
- 2--
- - 2-- - 22 .---- -----2---r-22222 G"6-a 22 2 22 2 2 2- 222222222 2224,22 4 '22*22
----------- 22 ---2224 2 2 2 2 2. 2 2 --
------------------- 2 - 2-- ... 22 ... 2 .... : .. p24 2--
-- Ot 2222 '*1*424. --- 22 22' 2'; ---- 2- 2 2 .144.......-
2' 2 2 .5 2 2ff 2-
-- - - - - - - - 2-
.... f.... 2.222222.. 2 22222 2 '.. 2 "2- -------- '------
-- 2-----
---- ---)
------------ w------ 2--
- - - - 2-2 - - - - 2 22
- - 2---- 2-2-2-----2 - .4-, -----2 2.24227>.
-- - - - -- - - -- - ,222-------- 2-
- -- - -- - - - - - - - 2 2 4-4-4r -'t.-V-t..*
.24----------
2 *22 2222---- 22-- - 0-. .t 2 kk 2'2. 2 22 2, *22 2 22-- 2 2 2----
- ~~~t~~ "NV Vt 4 NaO.LVV4' 5~N~
2 IJOi EZ *2G2I\YZO 1 0
r4r" u.: ru-luu-i, 04-r"-1UU-Z, 3, 4 and 5 h A Reactor Head Penetration FRUA1J ZA MP Ultrasonic Examination Data Sheet 0 Customer: WMC, Plant: P,4-- PeA..k, Unit: Penetration No.: 2V Procedure: 5L/-JS/- IoO0'j Equipment: Description VH# Cal. Due Date SN# jTomoscan " * , /;/0zozq 16 Channel P/R N/A "N/A ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEXm Data Analysis Software: Versiorn..-3&- y. r7. Cable Length: S
-' Type: Zs- i'i-q # Intermediate Connectors:
Calibration Block: (,o//9,3o3 / Calibration Setup: Scan File N o.: , = --. - ' .c . , Initial Calibration File: IS-
"/. 4'T.o~, .6. J ,/I./8., &.3T, Final Calibration File:O ,, rzw_u-,nM Cw
- 7.YZ.
31 Scan Start: Z - Scan Start: 0 = -- Scan Stop: Z = 2,Q7,"" Scan Stop: 0 =..ci in ex Increment: 3'
,Channel IAngle Serial No. Comments
/ 5 "o'J. .p , 9 c Results: No/ R cordable Indicationsý Leak Path Detected Axial Flaws Detec -- Circumferential Flaws Detected Comments:
Anal ed by: Level:*, Date: i I Reviewed by: Level: -Date: /.' ! I 4/ TYPICAL DATA SHEET FIGURE 5 I N) ýýVJý7-W Pa=ge 31 of 32
A 1=RA MATO3MI ANI' CRDM Nozzle Ultrasonic Examination Data Shoot Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 -Nozzle: 24 Procedure: 54-IS1-100-09 Nozzle Dimensions: (Ira) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg,); 320 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch I S0379CN Ch 6 n/a 50b Ch 2na Ch 7 n/a Circ. Scan 2--AMTM __MStart:I AMP -5deg @1 -0.7 Stop: Nozzl 365Ultasni deg @I ExmntoDt 7.961- Setup: 3 he Ch4 n/a Ch9 n/a Files: A2269_15 29.12/15 42.09/15.49.07/_16.38 00 Cal Block SIN: 60119300 ChS n/a ChIO n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max
\_I__
1 NRI _ 2
-3 4 -5 6
8 9 10 11 12 13 14 15 16 3_ _ __ _ _ _ __ 17 Data Loc. 320 350 20 50 80 110 140 170 200 230 260 290 320 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees Noz. End 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.7 0.17 0.17 0.17 Inches PROFILE MAX. 2 80 130 O0 3 66 4.05 4.70 5.00 5 21 5.19 4.75 4.17 3.43 2.96 2 80 Inches MIN. 1.06 11.17 1.47 2.54 3.45 3.96 4.32 3 92 3.30 2.56 1.80 1.29 1 06 Inches Comments: Measured Thickness: 0 65 @*theta of 81 deg with ant axial position of .597 Limited Scan? (YIN): n Analyzed by: eZ.A,, . ,j,.-,,.,,-- "Date: 5? - ;29 -c 7-?. Analyzed by: 'N 1A, Date: 9126/20028:46 PM Nozz 24 Page I of 2
- I'
- '=,: '",' c .RAMATOMEAN. , "; . Nozze 24Profie, ,
15.01, ~ I'* .~P~3/4"t ~ tt 14.0d - . ~ Z 4 L . .. ** 0 "2 ....- -. .,. . -.... ......-... .....
"12.50.... ~~~ - "- ------ - .".....................................
-"... ,.:.".:Z-'-,.. ' , - - * .. . .. .. ; 7 '
10.05 91.5 ...... --. ..... - . . ...........................
. v 10.0. ..
81.5 . ........... :........ ............. .. ....................................... .................. .................
. ...-.--...---............... . I......... ............... ..............-
- ................. ... ] ......... .
9.5.......................-. . ...... ................. ........ ................. ..... ..................... 5.5 6.5 40.0 8.05 -..... 6.0 1.....................
..I........................... ............................
5.S -.. ... .... .... . .. .... ....... . . . ................ ................ ................ ......... .......... ...... ...... ....... .. l........... 5.0....-............--- -.-.-. ... ... ... ... ---..... 5.0 ................. ........................................ ..... ........... .............. ,.. . . ............. ........ ... ..... .... .... 4 .5 . . ......... 4.0 3o5 - o.... - . ..-.-----
-.------- ..-ý- . . ...-- _ .. ...... _.,.. *'* . .. _ ......'_.,......... ......._............... ............. ....... ....... ...............
3.0* .. .. *...... .......... . -. .. .. ... ...... ... . ............. _. ... ..... .......................... ,
"2.50 -"- - - I,- I -.. 7....
. . . . ..,* *... ... .. ,.. I0...... ,,...*...... ....... . * - 200..
2.07 1.0*" * "..
------ . . ..... .-.. .'i* .... '- :*
S-1 -- 2 -3
*,. 5Noz-9 E --- 10 --- 711 S ...- 13 -- ý14 - 15
- '1* -. Noz. End --===- 1 -'=--Unhill I Downhill depmnre;-
8:51 PM9/26/2002 Nozz 24 Chart 1 Page 2 of 2
r-w riu.: rw-luu-1, 04-tPU-1 UU-z, 3, 4 and 5 A Reactor Head Penetration nM A--.A'7%5,V C ustom er: M M'PC P e n e tra tio n N o .: V'.- AM-Ultrasonic Plant: Examination Data Sheet o.,* P ro c e d u re : 5 q - i S / - 3ej- Uhit:
,jj Equipment:
Description VH# Cal. Due Date SN# Tom oscan " "q 9 "11-/0 2-,zzq 16 Channel P/R N /A N A 'IA ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version-35S" 7,'3 16 Cable Length: Type: 1-4 *-q# Intermediate Connectors: I C a li b r a t io n B lo c k : / j"&,o q3 o 6 r C a lib ra t io n S e t u p : S c a n F ile N o .: /7 2* /;.z..S-.
; 4* . ? . / , In it ia l C a li b ra t io n F ile : ;2 ;,26 a'7 0 -1./ 11. -7 ij.Y.?/.o7 4*..'4 '..2D Final Calibration File: z jm uuXi,, 'fe", *,q Scan Start: Z = *. Scan Start: 0= Scan
- Stop: Z = Scan . Stop:
, 0 = JO-r Index Increment: 30 Channel Angle Serial No. Comments Results: jc cordable Indications) Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
/
A nalI e b :wd Level: D ate: -7 -* . tI Reviewed by: Level: . 1 7--Date: /Oc/6 I I STYPICAL DATA SHEET FIGURE 5 fi7N. Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Shpft FRAMATCOMM ANF* Customer: Nuclear Management Corporation Plant: Point Beach " Unit: 1 Nozzle: 25 Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 302 End of Noz. (in.): 0.3 Probe Serial No.s: Ch 1 S0379CN Ch 6 n/a
~Sb"~~ ~ ~ ! t~:I ~ld~§I~
~ Sdt~f
~A 1 Ch 2 nIaa
'~- .. Ch 7 -n/a V*M in' Sn/a ____________C3 a
Circ. Scan Start:5 313deg 3-0.34."0Stop: 365 deg @1 7.96' Setup: 3 Ch4 nla Ch9 n/a Files: A2269_12 53 23/13.09.18/13 31 07/1334.20 Cal Block SIN: 60119300 Ch S n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI - 2 -3 4
-5 6
7 8
-9 10 11 12 13 14 15 16 17 Data Loc. 302 332 2 32 62 92 122 152 182 212 242 272 302 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 Inches MAX. 309 3.23 361 4.25 4.84 533 557 546 5.13 4.48 3.94 3 34 309 Inches MIN. 1.38 1.52 1.71 2.47 3.30 392 4.23 4.10 350 2283 2.09 1.58 1.38 inches Comments: Measured Thickness: 0 65 @theta of 278 deg with an axial position of 5.13 Limited Scan? (Y/N):1 N Analyzed by: Date: 9-, - Analyzed by: N )P. Date:
I, 9127/200212 32 AM Noz 25 Pige I of 2
"'4. *44 4,.
-; ~~4 '2' ~Nozzle 25 Profile'- ,r"'/
.2' FRAMATOMEANP * '4 .. 4 K - - '4
! "5. "* ' ° t;. ' -' *. ... .... .... .. . . . . . . . . .. . . .. . . . . . . . . . . . . 4..
. .. gJ.- '13,; 0 135 ............................... ........ ................
14.0 . z '..... 13.5 .......
. _22v 13.5 . .... . .. . .........- -... -. .r-
- - -. .. . ..... V4 U phi llk 4' 13.0 .-.-.- ----
i .............. 12.0 .......... .............................. 11.5 ......--....... ..... 11.0 ............... .................. l..... .................. I".......................... 10.5 ..-... ....... .......... t................................ S... ............................ S.... .. . .............. ... 10.0
.......... .............I...........
S............ ii
.... .l......................
7.0. .....-........-. ............-........................... .-.......-................................. 8.50 ..................... ...... -----------------...... ..... ................ ................ I-................... . I-.......------------------------
........ 22 ..-.- ..........
7.5 .... .-. .. .... --- ....................... . . . . ....... ............................ S.................................i S....................... .... ..... S..... . ................ . . 6.0 7.0 -....................
. ..... I-...............................I.......... . . .............. ................................
- ------- I .............................
S............................... .................................. 4.0 ........................-.................... .......... ............... ........ ................................ 4 . ...............................-.. .......... ...... 3.5 4.0 -.---------- -----............. . ... . . . .. . . . . . .. 3.0 ......... .... .----.------.-. -.---.--.- ---- ..-....... ......... .-. . -- ..- . ..................
...... . . .- - Downhill 2.0 ...... Side 1.5 -. i......- ... -"i~ ----- -- ---- i' .. ........ .. .. ... ........ . ........ ......................
0.5 ............... . .. .................- .... . ... 0.0 4:;.V'
-1. ,,0 . .... '1.0
"" 50,....
100
- 1>
150 200 25O - 4300:; 1,: 4,1 ,,,. - . ,' *
-2
-5 -6 -4
-7
- 9 -- 10 -- 11 -- 12
-13 -... ...- 14 -- 15 -16
-Noi- End "---1 "*- Uphill / Downhill demarcation 11:31 PM9/26/2002 Noz 25 Chart I Page 2 of 2
I I rv N.: -1UU-. 04--.-1 U.. - .4 and 5 1 I FT AA Reactor Head Penetration
'Ultrasonic Examination Data Sheet Customer: ' NJ M _-.J Plant: M-- 3,e-,k Unit:
Penetration No.: /Procedure: Equipment: Description VH# Cal. Due Date SN# VTomoscan " ,1/-4103 '-1,9 = ~. 16 Channel nP/R e ACCUSONEXI "vData Acquisition NS/A Software: Version 6.2.5'No CmmA ACCUSONEX'm Data Analysis Software: Version S- ,3. 9 7# Cable Length: - IS ; 0 Type: Ze.- t'4q # Intermediate Connectors:I Calibration Block: "&ol e 73o el Calibration Setup: S ca n F!Ile No.: A,)2"-2,1.. o/. ý2.73" Initial Calibration File: ,f2-* 71- o.- *,06 c-Axa FlZaws Dett.e Final Calibration File: Detecteum pderaffljf* Scan Start: Z -" Z2 Scan Start: e - Scan Stop: Z =rS ,'JScan Stop: 0 =.7*5 Index Increment: 30
-Channel Angle ISerial No. Comments i *o' SO5c.-17
- 0 F
'I SResults: CfNo Recoi_.dble Indicatiý_nt-, Leak Path Detected Axial Flaws Dete*-U--- Circumferential Flaws Detected Comments: 1--e Analyzed by: Level: _L Date: I -? I-oz Reviewed by: Level: -Date: A9 -'. ,. 65 TYPICAL DATA SHEET oc.3 *O-t5°°Z/ FIGURE 5 Page 31 of 32
FRAMATOMG AN'P CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: 26 Procedure: 54-ISI-100-09 INozzle Dimensions: (io,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 59 End of Noz. (In.): 0 Probe Serial No.'s: Ch i S0359NF Ch 6 n/a Axial Scan Start:I -51deg @10 " -Stop: 8.56 Ideg @I 3651 Setup: 4 Ch2 n/a Ch7 n/a Files: A2271_01.32.351A2271 02.08.38 Ch3 n/a ChB n/a W' 4.,- e ,61Ch4 n/a Ch9 n/a
- * -____________, Cal Block SIN: 60119300 ChS n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 NRI 2
3 4 5 6 7
- 8 9
10 11 12 13 14 15 16 17 Data Loc. 59 89 119 149 179 209 239 269 299 329 359 29 59 Degrees WELD Noz. Loc. 0 30 60 90 120 150 ISO 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 .. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 2.83 3.03 13.36 4.01 4.73 5.36 4.21 3.60 3.03 2.83 Inches MIN. 10.77 "0 89 1.20 2.33 3.05 13.94 12.62 11.49 1.03 0.77 Inches Comments: Measured Thickness:1 0 69 teao 33 dewthnaxlpstonf 538 Limited Scan? (YINY I Y 1.7HEMIJAt*, Limited scan between 220 to 301 degrees. 78% complete Analyzed by: tm .- / _. .__ Date: 9.;Z-, 07-O. Analyzed by: .. .. ... i/A Date: 9/29/20028:15 PM Noz 26 Page 1 of 2
,, , t..
.. , " ' No zzle 26 Profile .Q I* FRAMATOMEANP " -
14.5, - .-... ~~ .... '"'S . w. ;:,< , *,,* .i.
.... ........... . . . ...... . .... ... .............. .. . . .... . ... ..... .. o.....
13.5'.. .... - .. ..... .
- .......... ... . ...L..................
.-.- .... -....... ........ -:................................, ..................... ................ .7..-tC....................... ..................... ................ . ......
13.0 ......... ......... ..... ........................... .......................
. ..................................... *I......... -. ..... .................. 1-.............................. ...---,..Z..':.; ......._......... -_ ........ .... 9 ? ~ .~
Slide 12.5 ......................-............. ................................... ................................... ................................. " . I- .. '-.
..... ............S..... ............. . ...I............ ..... ......." . . . ....
12.0 --...-...... .-..................... - - .-....... . . ................................................... -I
......... ...... ............ .. ................ ... .. _..... ......... . .. . . ........... .* .=..'....
11.5 ..........................................................................-.......................... ....... ...... ............................... I"....... ....... ......... .... ...... .................................... 1 1.0 . ................................. ................................... ............................... .... ........................ .......... ...... ................................ S..................................... .......................... - - 10.5 . ......................................................................................................... ........ ...................... .... }..................................... 1 0.0 ...................................... .................................. .................................. * . . ..............
....... ............. .... . . ......... ... . S.................................. ........... ...................
9.5 0................................................................................. 9.0 ...................................... ...................................... ... ......... ...... . . ...... . ... . ........ . ...... ............. S..................................... ............... ..................... 8.5 .. .............. 8.0.0............................................ ...................... ............ 1 ..................................... 6 ...................................... -.............................. ... ...................... ..... ............. .... ............. ..... ..... . ............................... I.................................... 67.0 ........................................................... ? -.......... .. ..................................... ..................................... ..... ............. ................ . .................................. 5.5 ....................................................................................................... ................................... .......
................. S.............................. ..... I......
6.0 . ....................................... ................. ...... .............. ...................................... ...................................... ..........
...... ....................... ... . ... .. .I ...... .........................-.....................
5.0 . -.-............... ...... ..... ........... -------------- --.....-..................... 5.4 ........................... .......... ................. .........................- ....... ..................................... I .................... .. ...... ......t.. .......... .... ....... ... ... ............ 3.5 3.0 T................. ............ ..... ................ !!!; ... ........ 2 ...... .. ....... .... ......................... S................... . *.. ......................... ... . .* . . . .'. ...... ... ...... ....... 2.0 . ,.. ....................... . . .....................
. ............-.......... Downhill Side
-- ---- ---.. .. . o 10.5 .. L .
0.5. A.".""".......,....' .z25.t......................... ... . . . . 1. I I
'.4 b';
9. 9 . 0, """ ' ;" " " '-1'00 150 : ,2 0 0 - 1 250.7,'r 30011 t~~ 56IS; &
"5 , "9 . y
,- . ", ; "; - . " . Degrees,
.,w
-2 -3 °. * ',.
",. :)... ":,*,.,300
. ,. o;* .,-," ,*
8 r;,' 999 -6
-10 '---"11
*7
]
250
! -12 IA tji It{ k1'
'3.. -1 3 14 15 -16 I2fl; Wi ,Noz. End "--1 "-i--Uphill I Downhill demarcation 'V 7:40 AM9/29/2002 Noz 26AxWal Chart 1 Pag6 2 of 2
Iu ru.: ru-1 uu-1, rw ,4-Vu-iUU-Z,3, 4 and 5 Reactor Head Penetration F IX"IME A Ultrasonic Examination Data Sheet Customer: WM.C Plant: Po ,-- 8I,-qe,~.. Unit: Penetration No.: 4Z-- Procedure: 5- ,S/- .. "O E uipment: Description VH# Cal. Due Date SN# gTomoscan ", 99/ -1 , .o-q 16 Channel P/R NZ.A I, NIA -. /1A I ACCUSONEX` Data Acquisition Software: Version 6.2.5 Intermediate Connectors: r-q # ACCUSONEXIM Data0oAnalysis ' Type: k.- Software: Version3! s. P. Cable Length: Calibration Block: "o/Jq3oE/ Calibration Setup: Scan File No.: -. "Initial Calibration File: AZZ2-- o,4. 4-'.o S- I*,lo,.., Final Calibration File: _c.,iurt-.*u rw*rb gr.*.., *. Scan Start: Z=-6.i,' Scan Start: e =- Scan Stop: Z= q? "Scan Stop: 06= W* Index Increment: 30
-Channel Angle Serial No. Comments S~~' qgc o ýs A- l y
12 Results: 1/No Recordable Indications Let. Pah D qoctd Axial Flaws Detected , Circumferential Flaws Detected Comments: Analyzed by: Level: Date: V?/z-Reviewed by: . /Level: I
-Date:
TYPICAL DATA SHEET FIGURE 5 A Z 7. -4Z . vo . ;Z - . 2 -:S 4 1q3 73416 *33 39 13? &, 173 OIL) A Z:-qz 2 :. Li . ac 2 Page 31 of 32
,C,
. Aq ZLG8
A FRAMATOMM CRDM Nozzle Ultrasonic Examination Data Sheet ANP Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 27 Procedure: 54-ISI-100-09 jNozzle Dimensions: (In.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (den.): 0 End of Nz. (in.): 0.17 Probe Serial No.'s: Ch I S0429CN Ch 6 n/a Axla!i a3 "kt.atSt . jIdeg - " Setup:, , Ch2 n/a Ch7 n/a
* :-- , Ch3 n/a Ch8 n/a Circ. Scan Start:[ "5deg @1 -0.7" Stop:I -365 Ideg @1 8.531 Setup:[I Ch4 n/a Ch9 n/a Files: A227205 27.261 05 49 031 _06 06 521 06 21.36 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 12 NRI-..... ,
3 -4 5 6
-7 -8 9
1o 11
`12 13 14 16
_17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Nozo Loc. 30 60 90 120 150 180 210 1240 270 300 330 360 Deglrees PROFILE Noz. End- 0.17 0.17 0.17 0.17 07 0.7 0.17 0.17 10.17 10.17 0.17 0.17 0.17 Inches MAX. 3 67 3.85 4.35 5.00 5.67 6.22 5 62 4 92 13.73 Inches MIN. 1.52 1.57" 2.05 2.98 _ 4.08 4.75 1 4 25 1 3.40 11 1.47 Inches Comments: Measured Thickness: 0 609 @*theta of 290 dea- with an axial position of 1 5 041 Limited Scan? (YIN):l Y H!* l", Limited scan as follows: 174 to 205 degl /211 to 236 degl 1264 to 332 degl I total limitation 124 degl 66 % coveragle Analyzed by: -' D~ate: 1)7 E.*7o i Analyzed by." AJ/ Date: 9/29/029.53 AM Noz 27 Page 1 of 2
44 '44 - - 4.. 4,,, .44.. 4,, 44: ' - .4 4. 4 - 4 44 4 4,
**4*I44 44 44 , 4 '44 44,4*4 44 '1.4 Nozzle 27 pj.?fll 4
44
- 4. 444 4 t,
- 44 44444
.';' .4 AMA1OMANt
- 44. 444.44, *444 K .4 4
.4 .4 444 444 4 S., 4 4 '4 4 44 44 44 '4 14.15 14,0 " . . ." *- -
C44 A*, 4 4
- - ...-- 4444144 -.444
. . .4, 4 '44 4,
---------------- 44 i-------------------
I 44 *4 i r 4 4 .4 r - I
*444.
13.5 °.. ................ 4.................. 13.0 ...... ------------ - .............. " "... 12.5 --------- ------------ ------------------- S...... ..- .* .... :.
......... -12.0 ... ..............
... ii 11.5 - ---------------- Z................. -- -
-------------------- 44.4" .------ 44; *44 11.0 - .------------------.--------------..... ................- - - - ------------------ 4 ,4 4- - -
10.5 -.-- .........--------.------------- ------------------- ------------------- ------------------- S.......... ; .... - :... 10.0 -------------------- ------------- ------------------- ------------------- ---------- U 9.5 -.-- 9.0 8.5 8.0 - 7.5 --------------------- 7.0 --------------------- ----------;I-- ------------------- ------------------- ------------------- 6.5 -------, --------------.................... ------------------- ------------------- 6.0 ----------------------------------- ............. --. ------------------- ................... 5.5 ----------------------------------- ... .............. -------------------- ------------------- 5.0 ,.*. .. . W4lI4,49 UUUJWUMMMUj4U.44 9Wi,4MMD,uiurn,uiJj4 4 4 Pumwflmmmw4 4 vpuuwu.uuuina., 4, 4.5-------------------- .............. ... 4.0 ----------------- ................ ------ ............ 2.1.5 3.0 -----------------
------------------- 4 44--
2.30 ....*-... . . 35 -
-L ----------------
... a,---------------
4 - -4. 44-- DowhhIII 40 2.50'- ... ..
........... 1 -------
100* 150 , 200"'" -,:" 3/4 250 ,,
,Denreaac , -
-2 -3 -4
-7 -8
.4 5 -. 10 11 -- 12 14 -15 ------. 16 K:-
i.-~-13 Noz..End "'=-
-1
" 1 ~""=Uphill I Downhill demarcation 9:51 AM9/29/02 Noz 27 Chart I Page 2 of 2
i -w r4u.: rW-1 UU-1, 04-1-U-1UU-Z, 3, 4 and 5 lkeactor Head Penetration rFRAM, ,TOMM, MPUltrasonic Examination Data Sheet "Customer:., N, MVC Plant: ,-- -k, Unit: Penetration No.: ,78 ! Procedure: 5q- S/- .1oO-'D* Equipment Description VH# Cal. Due Date SN#
ýfTomoscanl "1"'*' "/*-;/03j -o.q 16 Channel PIE N /A N/A.M N
ACCUSONEX*M Data Acquisition Software: Version 6.2.51 ACCUSONEX'm Data Analysis Software: Version 35 .T.B Cable Length:- SO' Type: k6- t-j-q # Intermediate Connectors: Calibration Block: 4/qo~ Calibration Setup:
! (,,o/i'*3o *'1 Block:422-7"2 I Scan File No.:
Calibration -Zo. go. I Scan Start: Z - 0 Scan Start: e =
.'2 Initial'Calibration File:
Scan Stop: Z = 9..r Scan Stop: e = r
,.7J.q Index Increment: 30 Channel Angle Serial No.- Comments St 5" "1. .50 q/0'oC Results: eor able Idications Leak Path Detected C-Axial Flaws Detected Circumferential Flaws Detected Comments: rcr,.*'- ,
/
Analyzed by: Level: Date:,. " Reviewed b :Level: -Date: 1aO.9-cZ--
"6/-TYPICALDATA SHEET FIGURE 5 J? o13Do Page 31 of 32
A D ~i.- 3IL" JII IJacL Customer: . ... ..... Nuclear Management Corporation -. - -* e ..- Plant: Point Beach
**. , ,IIIINIA 311 Unit: 1 Procedure: Nozzle: 28 54-11-100-09 Nozzle Dimensions: (1i.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (del.): 318 End of Noz. (in.): 0 Probe Serial No.s: Ch i S0440CN Ch 6 n/a Ctlr~J! * * * °Settzp!t!u i~t Ch2 iles. :
n/a Ch7 n/a
- ~ g"u "Ch3 n/a Ch8 n/a Circ. Scan Start: 0 deg @~ -5 8.56 deg @
"Stop: 365 Setup: 3 Ch 4 n/a Ch 9 fl/a Files: A227220 40.29 Cal Block SIN: 60119300 Ch 5 Depth n/a Ch 10 n/a End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min MIn Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 NRI 2 A 3
4 5 6 7 8 ' 9 10 11 12 13 14 16 Data Loc. 318 348 18 48 78 108 138 168 198 228 258 288 318 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 MAX. 2.54 2.78 0.00 Inches 3.38 4.04 4.72 2.74 MIN. 0.75 086 1.35 2.54 Inches 2.07 298 086 Comments: 0.75 Inches Measured Thickness: 067 Q theta of 80 deU with an axial position of 6.24 Imlted Scan? (YIN): y Y I' eJ Limitation from 89 to 261 degrees. 52% coverage. Analyzed by: 444r,..* Date: . . -p t- Analyzed by: m Date: W 09-.ro.',v 9/29/200210:16 PM Blank Circ Data Sheet (2) Page I of 2
*1
.4 FRAMAir , o'.'2' :
. .,...Nozzle 28 P'rofile II S.. . ...............................
14.0,~- .................
. .. ........ * *4'~
14.0 .............. 4......... .. ...... .............. ...-..... .........
.,* Uphfl t2:
13.5 . ..... . . .............. ........ .................................. ........ ......... 1 12.5.0. -..........-. . . . ..... ..................................... ....................... ............................................................
........ .. . -. -........... ......... :- ,.. , 1- -7 7 ;
T Si .
,6t .de-:
j4 1 3.0 -----------.-............ ..................................................................... ........... .-- ................... ....... 1 11.0 ............................ . . ................... .................. 10.5.....................................................-.-..-. ................................ . . . . ...................................... . . . . . . .... o.o 0.................................... 10 . .................................................................... 1.05 ........
-.. 9.5..........
.................. 6..............
............. .I .= --
.i ..........
10. 0.0 ............... ..................... I....................::
...................... ........ .. ..........................................................................- iii~ =:=2=-i - .
9.5 ................................................................................... -............................................
.0 .................................................................. . . .... ..........................
85
.5 ...................................
.5.............. ....
7.0 ....................................
- 4. , . ... ................................
................ ................ ..... ..... ................ ... 6.. ......... .... ..........................
4..5.- ... . . .. . . 4 5 ........ ....... . . .. ...... ... ........ ... . . ......... ............ ....
~ ~ ~......
5.0...... ~* i .............. . ............. ........ ....... . .......... '.......... ... . ....................... ........ ......... ..... ................. .. . ....... .. ........ ... ...... ...- :-............ ........ -. . - ...
- =. L . ; *....,
2.0 . .................... .. . ........ .... 2.. .... .......................... 5 .5 .................... . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .... ............... ...... .......
. . . Downhill Side 0.5 1.0 ....... .. .-. 4..... ........
..- 4.A.......
. . ...... ~.....-...
. . . I.............
.............. ....-...... , ..... . ..... 6... .,-, ...
.0.. . .
. . . . . . ..... . ..4 . .. .. -
....... ." . .; 4 ,Z,
-z.t&IV 4-
'y 0 . ".44'i 509' ". 2'100" 150 I 200 250- .,- -, 3009 4.t¶.735Q%,
,., - ~~...*.,.. 4 - 4 .4 6% 61% 4 4
S ...... -2 --- 3 44 913 10 11 12 I,
- --- 14 -16 1. I
"- Noz. End 1'""---'Uphill / Downhill demarcation 2..
4444 N 644$ 10:15 PM9/29/2002 usbladeprobe-Pt.Beachi.xis Chart I Page 2 of 2
"FAMATTOME Customer:
AN13 CRDM Nozzle Ultrasonic Examination Limitation Sheet Nuclear Management Corporation -. lnt oint Beach j*it Nozzle:-'-* , Procedulr...e: 54-ISI-100-09 Nozzle imenion's: (10.) ID: 2.750 OD: 4.00 Thickness._ 0.625 Downhill Side of Nozzle (deg.): 318 End of Noz. (in,): 0 Probe Serial No.'s: Ch 1 S0440CN Ch 6
'Oi" n/a dei- ChVs n/a Ch 7 n/a e*-'1 .14"-'. t. ,~iv
,,*"A .VP, Ch 3 Scan rtO d g 0 n/a Ch8n/a
- :ic
*T @ 3 5 e u : 3 Fls A2272.20 0.29 Ch 4 n/a Ch 9 n/a Cal Block SIN: 60119300 Ch 5 n/a IAcquisition Instructions:Ch0n/ Ch1 /
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred.
For example, current limit activated, probe stalled on upward stroke, rotational I tpe cnwe stall occurred. a ecame to.tgtt scan.
.A ..-
- 2 Scan himie fo frm 9too2d. rees. A'-t'otal of 172 degrees.
8 9 14 10 15 16 17 12 IT-I 14I is II 16I 17 18I 20 21 Acquired By: Date: ;z -. - 9/30/20021:40 AM Noz 28 lim Page I of 2
l-W rvu.: rW-1 UU-I, 04-rL-1 UU-Zt 3, 4 and 5 Reactor Head Penetration "Ultrasonic Examination Data Sheet IPlant: , leAI Unit: Procedure: 5'- isi- o-e* ACCUSONEX' Jm ACCUSONEX "Data Acquisition Data Analysis Software: Version 6.2.5 Software: Version+/- 3*.?,. Cable Length: - Type: Z&/- i,4-q Intermediate Connectors: Calibration Block: & o1yq3o,6r1 'Calibration Setup: Scan File No.: :z2.70_o z- 3-7. 25 Initial Calibration File: A -zz. -o.JQ, Z7
* ., Final Calibration File: *,,nn-7urjrp Scan Start: Z = -. ? Scan Start: e =.S" Scan Stop: Z = x2 "Scan Stop: 6 = 14 Index Increment: 30
/
i J( lI TYPICAL DATA SHEET I FIGURE 5 (bIjslc Page 31 of 32
A -. LIUJI nee Customer: Nuclear Management Corporation .. Rfl M Ir.,.I.n _ a.iU 3.La neet Plant: Point Beach Unit: 1 Nozzle: 29 Procedure: 54-ISI-100-09 INozzle Dimensions: (1h.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (de*J.): 229 End of Noz. (in.): 0.35 Probe Serial No.'s: Ch 1 S0375CN Ch 6 n/a MIA~ de"@ 1 1 td:I Ie@ ŽW 4Setbf ' Ch 2 n/a Ch 7 n/a 4'A "?X~ ~ d~~. ~~ ~ >~4~ Ch 3 n/a Ch 8 Circ. Scan Start:l -5 deg ,-I -0.7 " Stop:, 365 Ideg @ n/a
.521" Setup:[I Ch4 n/a Ch9 n/a Files: A2270.03 07.291A2270_03 33 04 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI ,
2
-3 -4 -5 -6 -7 8
9 10 12 13 14 15 16 17 Dt Lo.29 29 289 319 349 19 49 79 109 139 j169 ...199 229 Degrees' WELD Noz. Loc. 0 30 60 90 120 150 1ISO 210 240 270 -30 30 360 1Deg]rees POIE Noz. End 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.3 0.35 0.35 0.5 nce M. 3 23 3 38 4.35 5.-14 5868 6.13 16.10 5.90 5 32 4.58 3 87 3.31 3.23 Inches
,MIN. 1.23 1.55 2 24 2.96 3861 4 63 14.78 4 8 3.56 2 80 .... 1-91 1-38 1.23 Inches Comments: Measured Thicknes O 7 @heta of 50 deg with an axial position of 1 7.261 Limited Scan? (YIN): N -Analyzed by: ,,/,,*_ 't ."Date: 74_,d 1- Analyzed by: */*Date:
9/27/200211:58 PMNo Noz 29 Page 1 of 2
iN. A',
- 4 ';' FRAMATOME ANP ' " *~~ 4;r' I.- , .,'J', -d S15.0 [: *'j:>. " ' , "
15, 14.501.0-......
- 2t'.
l2 Profile.. . ......
......... : ..... ~ '< ' ".n, .* h S....... ........... .:_.......... :........... ........ . * , ,,;. ,o 13.5 . ......- .............. ...................
13.0 ............ .......... .. ...
.*.. ..... l *,
12.5 .-................. ....-.............. ............-. ............... ............... ... .. ............. ........... ............. ....S........ .......
............................. . : .. ... ,i: * -8r d*'.....
. ... a: ,
12.0 ............................ .... ... 1.5 ........... ........... .................. ............. ........................... .... ........ .......... 11.5 ................................................................. .................. 11.0 . ..... ...... ............... .... ............ ..................... I..... ........ ... ...... ... 10.5 1.............. ................... ..... .................. .......... .................... .....
. .... . ........ .......................S....... .... ........... ......
10.0...... . . ...... ..................... .. 9.5 ......................... . .... .... 9.0 ............................................ . .. ............. 8.5 4 ................................ ... .. .... ....... ........ S................................. I ............................. 8.0 .. .. ........ ...... ..... ... .S.... ...... .......... ..... ... i.... ................ I ..... ... ......... ..... . 7.5 .... .......................... . S............. ..... ........... i... ....... .............. ..... 1"............... ......,"......... S.................. ... ............ I ....................... . .............................. 7.0 ............. .......... ........ . 6.5 .................... ...... ...................... .......... . 6.0 ....... .............. .. ... .. ..: 5.5 ....... ... ............. ....... .. ........ ..... ... .... ..... 5.0 ....... ................. !..... .................. ......... .................. .. . ..... . ..... ....... ........ 4.5 ... . ........................................ 4.0 -- . ....... . .. ........ ý................................ ............ . ...................
............ . 1..................
3.5 ....... ..... . ..... ...... 3.0..... ................ ......................... .. ..... ................ ....... ...... ....... .... . .......... ..... ............... ;................ ............................. ..... 2.5. --- -- ------ ... ..................
..... .................................. ....... ..... ................ .......... . ----- ............. ..... .......... ........................ ...... ... Downhill 2.0 S............... v .............................. ...... .... .....
............................ ',.;'-, t,-,..'-;.......
.*..:..-.-L "-i*.'....,-:
1.0 .... .......... ..... ................................. .... ................. .......... ............................... ..S............................. 6. 0.5 -- .............................. . .. A.......... 0.0, I I r1. I I I I ' 'J'.zz
- ..- t 5, - , 100 150 .. .,200 250: _3oK 300' 5 -6
-2 --
*7 3 4
-9 -- 10 8
-- 11 _-12 'it 13 S..- 14 15 -16 jt
-.--= 1 40' in Noz .End -Uphill I Downhill demarcation I:it."
44
'I 12:11 AM9/28/2002 Noz 29 Chart I Page 2 of 2
I ma r- ,.: rw-luu-l, 4ý-.V-I UO-z,3, 4 and 5 1 I iReactor Head Penetration £ -. FAMATCMr-A " Ultrasonic Examination Data Sheet Customer:. WM Plant: co4- Be*,*-k Unit: Penetration No.: ' Procedure: 5q- ,S/- ioO-D* Equipment: I U*.LCjjpn LvON Cal. Due Date SN# gTomoscan "" .q 16 Channel P/R 2 N/A , N/A ACCUSONEX' M Data Acquisition Software: Version 6.2.5 ACCUSONEX "M Data Analysis Software: Version 3:.-' Cable Length: ot' Type: e- i'1-q / # Intermediate Connectors: I Calibration Block: (,o/2, 3o&7/ Calibration Setup: Scan File No.:.,t 22 2 - ..- /is, sy-.kr Initial Calibration File: 4.2= 7a -127....
". 9. . 4..? Final Calibration File: ,ýO.rrM pz',,,wvcz Scan Start: Z- .0 Scan Start: 0 = -5 Scan Stop: Z = S3", Scan Stop: 0 =X.65 4 4iW^ Il'L,-Chann el I;Anql, I S / ; 650' I ii
'PICAL DATA SHEET t
FIGURE 5 f 9-30 Page 31 of 32
1 Ac CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 - - Nozzle: 30 Procedure: 54-ISI-100-09 Nozzle Dimensions: (It.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 119 End of NozL (in.): 0 Probe Serial No.s: Ch I S0445CN ChS n/a ________________e_____e___________________________ Ch 32/ Ch7 n/a
'91 -' -. P1Vde @ Ch2 nia ChB n/a Circ. Scan Start: 0Jdeg @1 -5 1 Stop:. 8.56 Ideg @1 3651' Setup: 3 Ch4 n/a Ch9 n/a Files: A2272 18 51.59/..18.59,45/_19.22.33/_19.36 43 Cal Block SIN: 60119300 Ch5 n/a ChI rn/a Depth End Point 1 End Point 2 Axial Adljusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total MIn Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (In.) (deg.) (In.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (In.) Ratio Orientation MIn Max 1 NRI 2
3 4 6 7 8 9 10 11 12 13 14 16 17 Data Loc. 119 149 179 209 239 269 ...2.99 329 359 29 59 89 119 Degrees WELD Noz, Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0,.00 0.010 0.(10 0.(10 0.00 0.00 0.00 Inches MAX. 2.74 2.78 13.29 4.00 4.79 4.22 3 26 2 88 2.74 jInches M. 0 61 0.78 11.19 1.88 2 93 2.45 1.28 0 66 0 61 lInches Comments: Measured Thickness:1 0 699 theta of 1180 deg with an axial position of 5 341 Limited Scan? (,/,N): Y M,=MR*11[ Limitations from 38 to 47, 86 to 140, 237 to 354. 50% Coverage Analyzed by:__" j ----- Ote: Da 9,a*Oz Analyed by: /9Date: 1 C14" 01 -3o-o7-9/30/20021:32 AM Noz 30 Page I of 2
A 9/30/20021:31 AM Noz 30 lira Page 1 of 2
- 4 S..
44 4 4 44 4 4 Nozzle 30 Proile -. :~ ,* s ~ ,. t.~~
- 4, .4; 4., 4
, FRAMATOME ANP 44 I*.0 , ,.,?4.. , , - 4 4-. 4 4 4!
15.0 -1 1 14.5t 14 ........ 0
- 12. ' ..................................
13.5 - _.-". I.....
...................... .... ..... o.
-~ . - ... *.. ... ...... .. 4 U p~'
13.0 --
... ............. ... .... ............ .......... ....................... o. ... ........ -..............4....... .....
12.5 ......................................... .......... ... 12.0 ....................... .......... ................ ... ............. .... .... .......... ............
.o 11.9 .................................................
10.5 ...................... 19.0 ............. 1 '..
- 9. 0 . ................................... ................... .....
8.5 II I . . . 8 .00 ....... ........................... ........................ ........ .... ................. . .... .......................... 7.5 . . . . . S......... l........................ ......... . ...... 7.0 ........................ . . .
. ......... l .... .......
6.5........... ... .......... ... 6.0 ......................... .. ................. .......................... ............. ........ ................ . ........ ................... ......... ................. ...... S........................ .. ....... 5.5 . ................................ ........... ................. I................. ... ....... .... .... ............. ...... ....... ............... 5.00..........................
................... ......... ........... ............... ..... .......... ...... ... ....................... ............................... I .... ......................
4.5 .......... . .o........... .. ................. .. ............ ......... .................................. ................. 4.0 ............ .- .~~~~n ........ r -.... 3.5 .............. .. .. ... ......... 11il .......
.-------- .-- -I - --- - -- ----. --- -
. ....... i........ ..... .... ... ......
3.0 .... ... 2250
.5 .: ...... ... ..... ............. . .... ............ ............ .......................
............... .. I(.
.... ... .............. S.... ...................... .....................
.......... =............ . .. === .. =====
.==..... .
.................. ...........I...................- ... 4................. ....... ............
Downhill Side 150 - . .. 4 . 1.5 ------------ - ------------ -- ---- 4 ... ..... f .................................. . ................ .......... S... - ----)-[--,----L--':*--: yT--- 0.0 .
-0. .....----O ....
t-................ -.
-I ....................
................I
. 1..........
.(........... .. ......... . .4 ..... ....
4 4 44
.J
~ . 4 0.0 . I + - 4-'
,' 0 ,, :* " .:k,'50 100 150 200 25 300 ,' ,0
'44 %! .4 r.. N¶(.4.. *414;Z
-2 43 4
]
5 4 UK -2 6 -7l
- 9 10
- 11 - '12 'ON*
4 .4 . 13 -.- 14--16 12; - Noz.-End -'--1 iUphill Downhill demarcation 9:07 PM9/29/2002 Noz 30 Chart I Page 2 of 2
6 (Ec ý)/Aje iw rlu.: rW-Iuu-1, 04-tU-1UU-Z, 3, 4 and 5 I SA Reactor Head Penetration
*O*MAM ZtM AM'P Ultrasonic Examination Data Sheet Customer:' NM CIJC. Plant: P, 6eA,,A Unit:
Penetration No.: 3 j Procedure: 5Ls/-S.oO-"o* Equipment: Description VH# Cal. Due Date SN# Tomoscan "1 16 Channel P/R N/A ' N A/,I ACCUSONEX'4 Data Acquisition Software: Version 6.2.5' ACCUSONEX'm Data Analysis Software: Versionq .e& s.Sf Cable Length: SCI Type: Ze/- tý-q # Intermediate Connectors: I Calibration Block: (.o//q3o r1 Calibration Setun: Scan File No.: A9Z?.I*Z-01*.-i;, wt", Initial'Calibration File:ScanF i - oA/.,45, co Final Calihraflnn FiI*. ..s Scan Start: Z = , zo"Scan Start: 0 = -s' Scan Stop: Z = - Scan Stop: E = , Index Increment: 30 IChannel IAncile Serial No.-. Comments
- 5 L 0-10 4' .- ;
IN Results: .No Recordable Indications Leak Path Detected Axial F aws e ec ed Circumferential Flaws Detected Comments: -Analyzedby: b Level' Date: Z'./ -t Reviewed bty: -Level: _Z17Date: /0^'/ 4 Z-.
"TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet FPAMATF'rM AINF= Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: -31 Procedure: 54-ISI-100-09 Nozzle Dimensions: (11.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.): 14 End of Noz. (in.): 0 Probe Serial No.'s: Ch i S0429CN Ch 6 n/a Ax ial s &A* n `,- ~a
*, *,S t j. g . , d 691,@ I . 'I i"",' .",S to p . I
, j'*: ".: d ec-, n aC h
______ _____~dY.'QS::ý~ Ch3 n/a Ch7 n/a Clrc. Fies: Scan Start: L A2272_07.07.46 -5deg Stop:1 -365 Cal BlockIdegSIN:
@1 Setup:[93 8.57' 60119300 Ch4 ChS nla n/a Ch9 ChlO nla n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI 2 -3 -4 -5 -6 -7 -8 9
10
-11 12 13 14 15 16 17Data Loc. 14 44 74 104 134 164 ..... 194 1224 254 284 314 344 14 Degrees 120 150 180 210 240 270 300 " 330 360 Degrees WELD Noz. Loc. 0 30 60 90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches PROFILE Noz. End 0.00 0.00 0.00 0.00 4.34 5.11 - Inches MAX. 3 15 3 65 1.49 2.3-5 -3.28 Inches MI1N, 1.13 Comments: Measured Th ickness: 0 651 @ theta of 1251 deg with an axial position of 1 2 471 Limited Scan? (YIN): 7y %,-.*j;*'~
Limi~ted scan as follows: 0 to 10 degj / 120 to 360 degl / total limitation 250 degj 31 %coveragle The downhill side of the weld was located in the limitation region. 14 degj isthe start of the scan.
-I2 __--..( ; Date: /2/o-Analyzed by: /Dae Analyzed by:
cater" &I-a P- 'ý. 9/29/0210.20 AM Noz 31 Page I of 2
Z0Z -e6d 1.1.JetO 1.£ZON Z0I6Z/6V4V 0Z":0L uo1eoiewep IIP.IUMOO I PU3 -ZOf'NM .ým 91. 1.1. 0M 6-U-- £ 9-
£ 9 9.9d 9 9 , I 9' .. "..', 9* 9 9.*;'
- seeji~ea 2> .i90rw',
.4 09 o0z 09M 00 . 9 0
- -- ----1p 00
......... ----------- ------------- i...... ------------------- -------------- ....................
. . . . . . . . .9. . . . . . . . .
..- .... 9*0 vo -------------------- ------------------ ------------------ ---------------
7,- 1
---------- 17------- 07I
------- 7----------- -------------------- ............... 97I 1114UMOCI --------------- ------------------- ------------------- ................... -------- ----
~
~n j ~ ~~ I s ~m w ~n ~ l~
*OTk ia bi - - -- - - ---- - -- - - - i i Ria iu inu ~n u u u m~!au mmm mn ! N-x 1 9. I U I 5 I 1 l' 1 I U 1 u ! u 1 mf 11 W 4IU
*9*9
---------- z-------- .................... .................... *9*9 I- - - - -- -- - -- - - -
- 0L I.................. -------------------
------------------- -0*9
.................... -0'6
------------------- ------------------- ------------------- -9*6 I------------------- ------------------- -------------------
- 0WI Tot0I O*I1 -------------------
------------------------ -----9
-OWII
'kk
- 0 ',
li9id -------------------- ------------------ I -------------------- --------------------
. 1.
',-7 ---------- ......... -------------------
------------------- -- 9
- - - -* G-
- -I--- .... 9--- ....
*O 9 . * % 9 - N 999PjflOJd LCOIZZON
Pl-AAV FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations P NO.: PQ-100-,ROCEDURE NO: 5454-PQ-100-2, 3, 4 and S Reactor Head Penetration F4XVIAXOME ANP Ultrasonic Examination D.ata Sheet Customer: "vMc Plant: ,,.' *, e-A " Unit: I Penetration No.: Procedure: 6'q-1S/-/1,9--
"i Of E ui ment:
Description VH# Cal. Due Date SN# 4Tomoscan ,z7o 71L 3 A0317 16 Channel P/R ACCUSONEX "Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version -TIT Cable Length: 5o0 Tp e: R * # Intermediate Connectors: I Calibration Block: &o//1,3z/01 Calibration Setup: IScan File No.: o,9p 72 /*;*-/. Y3 Initial Calibration File:,q,6*, - /0.-2. 30 Final Calibration File: ... o02" Scan Start: Z = .0 Scan Start: 0 Scan Stop: Z = -yo,'Scan Stop: 0 = Ys-5 Index Increment: 30 Charin I Angle Serial No. Comments Z- 6" - 3zo'-/'
- 3004!. 3 *Zo27* "I.
3 . &,,O% - s5o o
,o'5 350o2.
3 Results: e Leak Path Detected *t. Axýial Flaws Detected Circumferential Flaws Detected Comments: AnalI Date: /e0 -'-0b-eviewed by: Level: Date:
"-'TYPICAL DATA SHEET FIGURE 5 Pace 31 of 32
- 0, R.
A 6 CRDM Nozzle Ulitrasonic- 17Ymminnfinn nflnf Qhnn Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 31 Procedure: 54-ISi-100-09 Nozzle Dimensions: (i,) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 49 End of Noz. (in.): 3.22 Probe Serial No.'s: Ch i 35044 Ch 6 35052 lit,_ t -;-". 4$etup:j : -~:rCh2 35202 'Ch 7 n/a Sn, Ch3 Circ. Scan 35070 Ch8 n/a Start:I -51deg @1 0 " Stop: 365 deg @L 2007' Setup: I Ch4 35044 Ch9 n/a Files: A2275_18.04.33 Cal Block SIN: 60119300 ChS 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Ad usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (In.) (deg.) (in.) Ratio Orientation Mmn Max I N1 2
-3 4
5
-6 -7 -8 9
10 12 13
...14 15 16 17Data Loc. 49 79 109 139 169 199 229 259 289 319 349 19 49 Degrees WELD Noz. Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 3.22 3.22
. 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 3.22 Inches MAX. 6.48 6 69 6864 7.15 7.76 8.17 8 83 MIN. 9 29 9 29 9.14 8.73 6.89 6 48 Inches 1 4.29 4.34 4 49 4.80 5 31 5 92 6.69 7.45 7 51 7.15 16 59 4.49 1 4.29 lInches Comments: Measured Thickness: 10 631 @ thet ofl 2891 deg] with an axial position of _10491 Limited Scan? (YIN):l N I Analyzed by: DateF /-av '/%Z_- Analyzed by: A//,A Date:
65'7 1013/022:29 PM Noz 31 rotating Page I of 2
21, "; .- , . -', ,k.
'U'. .. FRAMATOMEANP " I 't", . Z ,,W.'2, 1 ' "-: -. ,, .,. , - ,
" , ,15.0u .~ ' ° o'*" ...*" 4'- ~ -"- ;' ," " " ,... . "-" . , -- -.............
14.0. ..... . ..... . ....... 1 3.5 . ... , . . ................. .. .. ...... . ..... . . .....".. I,': - 1 3.0 - .... .. . . .... . . ...... ....... .... . ... .. -..-... .. . . . . . . ..... .. ... ... ...... ............. . .. ... ,.' 2. :Z . phi. 12 .5 -- . - .... .......... .. . .. . ......... . . . . . . . . ..-.. 12.0 ........................ .... .. .. 11.0 - ... S....... S...............................i S................................ S................................ 10.5 . .............................. i.................................. S................................J 10.0 ......... ......................... 9.5 . ............................... l............................ 9.0 .....................
............................... =7ýý ..........................
8.5 .................... 4-- .............. .............. ............ ..... ............................ mw_-1 - .. ,"' 7.0 ............ ...... 6.5 6.0........... 5.5
............... [........... .............. ......
4.0 .. .........................
.5 ...... ........................... ..................................
4.5 ............-.........-......... . ... .. ......... 3.5 ........................: ............................................. l11 i........1....... !
.I. . . . . . . . . . . . . . . . . . . .
i- .............. ill I ..... bm , 2.5 3.0 3.................. 2.5 ..............
...2 :.......
- ......... I***----
Io.. .... ............... I ..
............I
....................... . I--.--------..------------.----.....
............. 1 S.................................
4............... . . .
......... L-I --- -------
ý I. ..... .
- .i...#.:.
Downhill Side 0.0 -................... ......... ... I.. .. 1.5. 0..;"-, 0.5 "
,2...
~,'.
.....:-..10 Uo*
-I- 4 '
0 ,150 200 2501, , , "
.1 * . ,
-2 -3
-5 -6 -7
- p. -9 -10 -- 11 p -13 -..... . 14 i- Noz. End 15
* ,Uphlll I Downhill demarcation 2:14 AM 10/3/2002 Noz 31 rotating Chart I Page 2 of 2
P o1/LM FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-IS-.100.09 0 PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 "A. *Reactor Head Penetration FRMA", A NP Ultrasonic Ex'amination D~ata Sheet Customer: M-/WC Plant: PoIAM, Be,,wA Unit: Penetration No.: Procedure: "q-l-/ "j Equipment: Description VH# Cal. Due Date SN# gTomoscan /7z. o ;zo3 14 16 Channel P/R W,!1 ACCUSONEX"4 Data Acquisition Software: Version,6.2.5 ACCUSONEXm Data Analysis Software: Version,3- 3.,5 1 Cable Length: 5 O0 Type: RG-'L1-A # Intermediate Connectors: I Calibration Block: 6/I.v/Calibration Setup: A2213- 0.qb. j!r Scan File No.: Initial Calibration File:.Ajj4.2%-4 A M Final Calibration File: , ZZ.... Scan Start: Z = 6.o" Scan Start: 0 = -5 Scan Stop: Z = .2-" Scan Stop: 0 = Index Increment: 30 Chan el Angle Serial No. Comments 11 6- 1- :5 Z 3 v".- 13 5"zo Z * "F.D 3 1., 35070
&eo-g 3 6 okz C4 35052.
Results: No Recordable Indications Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed*by: , 6.0Date: z Reviewed by: Level: Date: /0/i / -_. TYPICAL DATA SHEET FIGURE 5 IDý\ov1 Page 31 of 32
4= A CRDM Nozzle Ultrasonic Examination Data Sheet F FtALM ATD?ME ALt%1 F3 Customer: Nuclear Management Corporation Plant: Point Beach . Unit: 1 Nozzle: 32 Procedure: 54-iSI-100 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 53 End of Noz. (in.): 3.3 Probe Serial No.'s: Ch 1 35044 Ch 6 35052 Axlal.. * .St... .. ?A ..... .I [',st,, I.' - I. g1 - . P ; ";"Ch2 35202 Ch7 n/a
. ....'-.ý, . . . -.. . Ch3 35070 Ch8 n/a Circ. Scan Start:[ -5deg @I sop1 20.07 Ideg @1 Sto," 365' Setup:I I Ch4 35044 Ch9 n/a Files: A2275_19.01.26 Cal Block SIN: 60119300 ChS 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (In.) Ratio Orientation Min Max 1 OD 058 6.1 131.0 6.5 143.0 0.39 78.0 90.0 0.42 \ 0.57 47 0.05 0.08 Vol 4.2 6.7 2
3 4 5 6 7 \ 8 9 10 12 13 14 15 17 Data Loc.' 53 83 113 143 173 203 233 263 293 '323 353' 23 53 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.30 3.30 13.30 3.30 3.30 13.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 Inches MAX. 6 29 6.29 6 33 6 65 7.23 7.91 8.49 9.07 9 25 8 89 8 42 6.33 6.29 Inches MIN. 3 85 3 88 3.95 4.21 49 .9 6.94 7.63 7.63 7.30 6 62 3.85 3 85 lInches Comments: Measured Tickness:I 0.635 @ theta of 12 e ih an axial position of 9 45 Linmi ted Scan-? (YIN): N In-dication #1 Is located at weld root Classified as a fab indication Analyzed by: * **Date:- /40*/ 7;7- . Analyzed by: 2112T* Date: 10/3/022:18 PM Nozz 32 rotating Page 1 of 2
JO0 SEecd 0 . PL4 BunlePo Z ZZON ZOlClOWMd tZ: UOiieaJewep lli4UMOO I lliqdnm.m.m L pU3 "2ON. 9* 6-
%7 L* 9-
, A ,, ,0 ,
,.9 . . 0. L-_.
A'-- S..... ... ,. ."..... '4.. 0"0 r,-,4,,
- 1.
- - - - - - - .-- ----- ---------- - . , '4 -
4 I , 0*"0
--- --- - - 7
. . f- ... . . .. . . . l......... . . . . .
4,~ --
------------------- I-.. . . .. . . . .' -- -- - ----- ---
III.Uepl0 -------------------- ---------
,IiIquMoo ------
------ -................... - - - ------- -OfU
- Y 9m
------------------- *-------------------- h St
------------------ ----------- -------- OT
----------- ------- ------------------- ------------------- ------------------- ----------------- ...........------- ----------- -------- 0
------------- ---------------- -------- ------------------- ------------------- ----- .. ------------------ ----------- ------- 9L*O 9'97
-------------- -- ------------------- ------------------ ------------------- ------ ----------- ------------------ ----------- -------- 0.9
-------------- - ----------- 9"9
----------- ------- L
...... ----------- -------- - ---------------------- ----------- -------- 0-9 LL
- I 333S4W S I. -r.mmwmw ww"m...--- ----- wwmwmv$,"wwA L
---------- -------- -------- 9OI
-----L -- -- -------------- ]-.. . .. . . .. . .
--------- 0.GI 99
-----------.35----- ----- ------------- -----.. -0 "1,1
- - - - - - --- --- -- - ------ ------------- 9's4
'5. -. - -------------------
4.. ------------------- -- - - -- - ---
-. -- - ---,- 4 .
'4- * ------ ----------- ----.I. ......,-.----.... G'6
--------------- -- -...------..... i- , ,O'l.
--- 4--- -
.'U'7ý
---------- ------ : --- -- *.:. Wet0"#
I POJd WI:£eZZON ,, ONV a*o.vwvivz
,1'5
.5 r *1 44
I re Pu.: r'.i-'UU-1, D4-tLJ-1 UU-Z, 3, 4 and 5 I A "Reactor Head Penetration 1RA4WATME-* A Ultrasonic Examination Data Sheet Customer: WMC Plant: + - I*..Unit: '. Penetration No.: 32- Procedure: 5q- I-/5eO-0D'i [-qUlJJi&lICL, Description VH# Cal. Due Date SN# gTomoscan -1 zo-*q 16 Channel P/R IN /A N1 . /A ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX_ Data Analysis Software: Version . Cable Len th: G0 Type: I?&- -4n-q # Intermediate Connectors: I Calibration Block: *(,ol I q3 E/l Calibration Setup: Scan File No.: A 2272- 's- .4a:J Innitial Calibration File: A.~-'.' Fnal Iq~it!'. Calibration File: c,1ý*, v~ PE Oam Scan Start: Z -7' Scan Start: 0= Scan Stop: Z =S7Scan Stop: 0 =-74-r Z73.9j Index Increment: 3-Channel Angle Serial N'- . Comments I 5"0j,. 5o,./*qc:N Results: -ordabl Indi Leak Path Detected
- Ial Flaws Detected Circumferential Flaws Detected Comments:
Reviewed by _ Level-
- Date: /*z/*-_
TYPICAL DATA SHEET FIGURE 5 69-30-02-, Page 31 of 32
R A IAZrcM AN1 CRDM Nozzle Ultrasonic Examination Limitation Sheet Customer: Nuclear Management Corporation IPlant: Point Beach Unit: I Nozzle: 3Z. Procedure: 54-ISI-100-09 INozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.17 Probe Serial No.'s: Ch i Ch 6 n/a O~fare- ~k~ ~~ _____ ' h n/a Ch7 n/ ME1 flva-1 M W ~~'Ch n/a C8n/a Circ. Scan v Start:[0 deg @L._...J" Stop:1/6/oj9_Ideg @I j' Setup: 3 Ch4 n/a Ch9 n/a Files: A7Z.T272 -13, .1I.0.l,*j6 .'ZO. q Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Acquisition Instructions:
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred. For example, current limit activated, probe stalled on upward stroke, rotational stall occurred.
1 -S+opped XC~j ,r 141-370 dy. 4-p 66'n t~ckbl_ -to !T-, vgzsa gtij 2.2' 2 WAS /WUO UIV~hLd 'ro Aecav. A9gri ~W~l ~ T~ p~c j~ r~~ 3 C-V OP ~b WS 4M7cJ-kM'J& <,A) -rM5: /--V 6r -7WL- EyN.E" 4 5 7 9 10
- 11 12 13 14 15 16 17 18 19 20 21 22
-,ired By:e~av 6 9 Date: 91Z) 2-9/2 I PM LinSheet le 1 of 2 F* 'N*,-C4
KC)t4ýý /V 7. FRAMATOME-ANP Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 509i
.A Reactor Head Penetration SFRU IM C- M P Ultrasonic Examination Data Sheet Customer: NMIC Plant: PoT,',.i &*A Unit: I Penetration No.: _T7 Procedure: .
Equipment: Description VH# Cal. Due Date SN# gTomoscan jz.7o T o317F 16 Channel P/R u/A ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3--a'7. IV Cable Length: Sol Type: R.,- 12A # Intermedi~te Connectors: I Calibration Block: "4e// 3DO/I Calibration Setup: Scan File No.: ,,P'2 *I--,.. ,. ' Initial Calibration File: q 22z c- - ,-. 9'. X
-R,* .-
V:.
/"Final Calibration File: Az-7.-_'=ZiZ.. _'7.o-"
Scan Start: Z = c, Scan Start: E =-s- Scan Stop: Z = 20.07 Scan Stop: 6 =.Ti'" Index Increment: 30
-Channel Angle Serial No. Comments 6 ° .35oq 3 - &.05 ss5oo Results: -No-Recordable Indications- Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed b: - Level: Date: lO-2 ;z -e7 Reviewed b :, Level: Date: /O-/'. "* TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
.A CRDM Nozzle Ultrasonic Examination Data Sheet "-.3 Customer: Nuclear Management Corporation Plant:- Point Beach Unit: 1 Nozzle: 4 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 176 End of Noz. (in.): 3.36 Probe Serial No.'s: Ch 1 35044 Ch 6 35052 L110prd; Iý =""~; do ! 1ýtP ~4i 1 Y.'.eg'J. Ch2 35202 Ch7 n/a P5a4 ?V*' ~ J Ch 3 35070 ChB n/a Circ. Scan Start: -51deg @I j" Stop:1 365 Ideg @1 20.07j' Setup: [ Ch4 35044 Ch9 n/a Files: A2275_19.56.05/_20.17.24_20.51.24 Cal Block SIN: 60119300 Ch5 35052 ChI0 n/a Depth End Point I End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (In.) Ratio Orientation Min Max I NRI 2
3 4 6 7 9 10 11 12 13 14 16 17 o Data Loc. 176 206 236 266 296 326 356 26 56 86 116 146 176 Degrees' WELD Noz.- Loc. 0 30 60 90 120 150 160 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 3.36 Inches MAX. 7.04 7.09 7.61 8.34 8.14 7.49 7.09 7.98 8.14 7.73 7.33 7.04 7.04 Inches IMIN. 14 57 4.61 5.30 6.44 5.83 5.14 4.86 5863 6.03 5.55 5,10 4.78 ý4.57 Inches Comments: Measured Thickness!: 0.67 theta of 330 deg with an axial po.sition of 8.881 Limited Scan? (YIN): 1 N 1 Anayzd b :-_7 Date: ,* - ".-Analyzed by: %J4 4* Date:
- 10K* I1AM Niabng t&
IV llbl"%- I of 2
4-c N-~ RAMATNIE AMIP I',;No 1ke33 P. file"fJ - - i ~ hl~:t7
; 145 1T 1----
.... S 1...
11.5 ..... .............
...................-------- --- . . ~r~ .......
.......... .. ... .... - ........ I ..... . ..... ........ .............
.. t -
-...... . -- ~- 1 -------..
.,,*',.125 .............. .. .....- -- .................................. . ..................
... .......... ... ....... ........... .......... . .. ... . .- * .. Uphill
.. A.. 1 ..
................... .......... ....... ... ..... Side 4 .............................. ..... -.......-.................
1 0 ... .... ... ......................... ........ 1095 .---............................. ............................... ................................. 8.0 ............................ ................ ..................... .... .... ............ ... ...... ......... .... ... ..... ....... .. .. .... .... .. .... .................... ........
'11 0 ............. ........ .............. .. .................... ...... ...... ......... .................
10.5 . ........... ................... .................................
. i ............ ............... ....,............. ...... ............ .................. ;...... ....... .. .. .... .... ................
8 ..................................... . . . .I 7.5 ...... .......-.-....... ...... ....... ........... . . ........... ...................... 7.0 ................................... ...................... 6.5 S......................... -- -- ------- ---------- . ...... .... .......... ........... ..... ........ ...... ...... .... ..... ................... ........ ........ .............. ................... ........... ...... 6.0 . 5.5 ............ 5.0 ................ 4.5 ......................... ..... ....... .............. ........... .............. 4.0 -------- ------------------------- .......... .............. ........................ ........... . ............ ................. ..................... ......... ...... ... ... .. ........ ....... -------- --- ....... 3.5 Y S
--- i ________ h t - L 3.0 2.5 _._........................ ........................... ....................
..... ...... f..............
I--- p-Downhill 2.0 'I\.
......... ( ....................
.. . .--- I .................. I... ....... ----- --- - ---..---- ----- - ..-.- I.-.---..-..-
.. . .......-.. .---------....... t7. ........ - ...........................
i-r I j- S ,o u .-. : 150 1o -'200. 259 -300 A0:U 0 350 400
-1 -- 2 -- 3
-5 -6 -4 8
-9 -7
-10 "--11 12
- 13 14 -15
-- =Noz. End m 16
--- 1
" -- Uphiil I Downhill demarcation 2: 2002 Noz 33 Chart 1 .2of 2 VV: 41,
rW Nu.: rW-iuu-, 04-rU-1uu-z, 3, 4 and 5 "A* Reactor Head Penetration PFRA*'- MC P . Ultrasonic Examination Data Sheet Customer: NJrM CI Plant: . &:,-.kUnit: Penetration No.: -- ]Procedure: 5'/- /SI- /oo-o Equipment: Description VH# ' Cal. Due Date SN# gT om oscan "" E T, i.A*' 16 Channel P/R N/A 1N 1A ACCUSONEX Data Acquisition Softwaie: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version 3-T. Cable Length:- -O TvDr- tPz- n-a !4 1 Calibration Block: (.0/o/1,30E& Calibration Setup: 4 ZZ 2.i14' Scan File No.: Initial Calibration File: A Ve low Final Calibration File: t.,J-r j , Fj-1. Scan Start: Z -. ,7' Scan Start: e= -- Scan Stop: Z = ".S-Scan Stop: e= .7Z.57 2 Index Increment: 30 Channel Angle Serial No.--:ý Comments I 50j.. :5oL-! Scr4* Results: ecordable Indications: Leak Path Detected cted Circumferential Flaws Detected Comments: Analyzed by: Level-! Date: ' 0-. Reviewed b:. Level: Date: lel/*9,-z.._ TYPICAL DATA SHEET ,4 ao9-c,, AZ-1-.2LS 17. 10. FIGURE 5 S- va -Ze-.
- i-. 3jt. ZL Page 31 of 32 17 14.* . 03
- f 5 q. 1.
-- . 7* '*
S A CRDM Nozzle Ultrasonic Examination Data Sheet F R-A M Ar~PA~r-a Mt Customer: Nuclear Management Corporation Plant: Point Beach Unit: I - - Nozzle: . 33 Procedure: 54-ISI-100-09 INozzle Dimensions: Oin.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deig.): 0 End of Noz. (in.): 0 Probe Serial No.'s: Ch t S0439CN Ch 6 n/a I @ I IdoS1 Setup: I-;-. Ch2 n/a Ch7 n/a Cic cn Sat - e h n/a ChS n/a Cir_. Scan Sjart:l jdeg @1 -0.7 I" Stop:I -365 jdeg @1 856i" Setup:[3 Ch4 n/a Ch9 n/a Files: A2272_15.10 021_15.16.06/_15.2828/_15.34 26, Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point 1 End Point 2 Axial Ad]usted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (ID/OD) Flaw TIp (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI *.m il i S2 ' 3 4 6 7 ; 8 9 10 11 12 13
...14 15 16 17
~~~~ 0 Data 5Loc. 30 160 ~
90 ~ 120 150 180 0____ 9___
. 210 1240 270 1300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 1240 270 300 1330 360 Deglrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 10.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. Inches MIN. Inches Comments: Measured Thickness: 0 624 thet of 126 deal with an a-'a poiino 6 Lmited Scan? (YIN): y*l~
Limited scan as follows: 0 to 5 deg /199 to 118 degj / 134 to 360 degl / total limitation 254 degl. Axtal limitation is located between nozzle end and weld toe. 3 %coverage The downhill side of the weld was located in the limitation region. 4Date: Analyzed by: 9 /*. I 7 - Analyzed by: o4 1,4 Date: 9/29/028:33 PM Noz 33 Page I of 2
'A ARf.7lVt l.
CRDM Nozzle Ultrasonic Examination Limitation Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 33 Procedure: 54-1S1-100-09 Nozzle Dimensions: (1n.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dog.): 0 End of Noz. (In.): 0.17 Probe Serial No.s: Ch I Ch n/a Y`4
.F%14. N N~____ Ch 2Sn/a nla Ch Ch77 n/a
~~.i'iiR Ch 3 Cire. Scan Start: ._Jdeg @1L_ " Stop:l!35.,//Ideg @1 [ " Setup:1 3 Ch4 n/a Ch n/a Files: A.Lzz. o315. lt.-
1.i0.3o /M*.ZY.**' I.*/ dji.Cal Block SIN: 60119300 Ch 5 nla Ch 10 nla Acquisition Instructiohs:
- 1. Define the extents of the limitation.
- 2. Be very descriptive on what caused the limitation and how the limitation occurred. For example, current limit activatd, probe stalled on upward stroke, rotational stall occurred.
1 -5+.vVC=b -A,V £-JO-MN Ate~ ,*,eA1" 7t, -, vHT " Aýýa -yir4,jf "iTPJ de'rTjecv.;- ud Q. ,*-" 2 ="-RH r- /-MeWn A)07 /IILG- '-,Q &5 5CNVer) 7--73 "4 -AA) 10off - //9" ,-W Tkle-SC CflA5 4 5 67 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Acquired By: *a *..*h * ..* B* "*. "[* Date: o Z-9129/0212.21 PM Limitation Sheet Page 1 of 2
ko1L47AJ FRAMATO ME-ANP N'ONDESTRUCTIVE EXAMfNATION~ PRoc.=rlp*= Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-41S-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 A'Reactor Head Penetration
,FMAATIOMAIUL Ultrasonic Examination Data Sheet Customer: "MJrC Plant: Po, Bew-A I Unit:
Penetration No.: 3q Procedure: 6-q-/Is/-6-aOf Equipment: Description VH# Cal. Due Date SN# LLTomoscan -/7o -2L1 7" 3 ;Zo31: 16 Channel P/R ,,, /N ACCUSONEX` Data Acquisition Software: Version 6.2.5 ACCUSONEX" Data Analysis Software: Version.-%315"* 3. 1 Cable Length: 5 o0 Type: lZ.,- A # lntermedi~te Connectors: I Calibration Block: (.// 3VD0/ Calibration Setup: 3" Scan File No.: Initial Calibration File: A ZZ(,.Z- 0. Z6. 30 A2 z &'.5-//. o(.-30 Final Calibration File: A -L.r. 6s'.)1.7 Scan Start: Z =o.. c-/ Scan Start: 6 = 0.O Scan Stop: Z = I/5"j Scan Stop: 8= 3*5 Index Increment: 30 I Channel I Angle I Serial No. Comments I Cm nts w 1 J 1L --2 , 0 -
->/
1 7- 1 30,11- 1 352.oz I -r D 3 & 0"-1-357 5" (.,f 3 o5.7 Results: ('No Recordable Indications Leak Path Detected Axial Faws Detec eCircumferential Flaws Detected Comments:
-7Ai "v AW ~-'/
M.11-r 00;-W~
- 4. POAaA,% - "
Analyzed by: Level: Date: /0/3/ -z IReviewed by: 4ý2 . el*2 Level: 2ZYý Date: /// 0 -z-TYPICAL DATA SHEET FIGURE 5 vA0;0 I~V Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Ilafa 5Rh*A Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 34 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 118 End of Noz. (in.): 4.06 Probe Serial No.'s: Chli i tti". 4i* de _ _, tujI *.* *, Ch 2 35044 35202 Ch 6 Ch7 35052 n/a
.. .. ,., .~. . . , Cb 3 35070 ChB n/a Circ. Scan Start:I -51deg @1 0.47 " Stop:I 365 Ideg @1 15.141' Setup: 1 Ch4 35044 Ch9 n/a Files: A2265_11.06.30 Cal Block SIN: 60119300 Ch5 35052
- Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (In.) Ratio Orientation Min Max I NRI 2
3 4 5 6 7
- 8--_ _ _
9 10 , 11 12 13 14 15 17 Data Loc. 118 148 178 208 238 268 298 328 358 28 58 88 118 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 4.06 MAX. 7.36 7.66 8.29 9.26 10.24 4.06 Inches 10.00 10.31 10.54 11.00 941 8.37 7.66 7.36 Inches MIN. 5.00 5.11 5.45 6.68 8.55 8.25 8.52 8 89 9.45 7.09 5.71 526 5.00 Inches Comments: Measured Thickness: 0.65 A thetaof 112 deg with an axial position of 1481 Limited Scan? (YIN): n
- Need To review the fabrication drawings for repair areas. Locations above compound weld area has rectangular dropout. Possible remant from repair region S/', Date: 3o _ no Analyzed by: Date:
iPm 4 1 of 2
6k.
- I FRAMATO'E ANP Nozzi6 34 Profile (rescan):. - F,'
* - -- .7.
15.0 - r
+/- F
'2
- r 14.5 . ..---------
.. .. -------------------. ------------------- ------------------ 1/4F 14.0. r-------------"....
r ....
------------------- ------------------ 4---2............. --------- ; .... ..*. - F 13.5 7 -------------------; -------------------. ------------------ ------------------
13.0' ------- --- --- -- -------------------. ------------------- ------------------ J---: . . . . . . -----
' I...
F 7 jF k' 12.5 12.0 --------------------- 11.5 r------------------- t-------------------
-- 2J_:...
<g5X Uphilit
,SIdb-g.
-. F FF 11.0 -- -- ------------------
10.5 ------------------ -- 10.0 ------------------ ----- 9.5 ---------- 9.0 -- ------- -- -------------------- 8.5
...... t ----
7--- j ~~n S........... PWJP.~flF~~fAFJIFm-i~Fi I ...... FIFVF~PMNij.i~iII
------------------ ýk rtFnJFJe~JJF
--- I FFJ I
I I'!"! 8.0 ------------------ ----- -- -------------- ------------------- ---------------- ------------------- -- ------------- e- 7.5 ------------------ --------- %r - ----- ............ 7.0 ------------------ ------------------ ------------------ ------- ----------- ------------------- 6.5 ------------------ 6.0 ------------------ ---------- -------- I------------------ ------------------ ------------------ ---------------- - ------------------- 5.5 ------------------- ------------------- -------------------- ------------------ --------------- 5.0 ------------------- ------------------- ------------------ ------------------- ------------------ 4.5 -------------------- -------------------- ------------------- ------------ ------ 4.0 - 1 1 1 3.5 ------------------ ------------------ ------------------ ------------- 3.0 --------- I---------ý:- ----------- I------- ------------------- 7' 2.5 ------------------------- -------------------- ------------------ --------------------- Downhill 2.0 ------- 7------------: -------------------- ------------------- *. --------- .
- -7
-, " f Side, 7--------
1.5 --- ------ ----------- ---- - - - - - ---- --------- -.-
--... ------------ i ----- - - -- - - - -- -- -
1.0 --------------------- ------------------ ------------------ : ------ ------
---------- . "-------- --- .. . .. . ... ----- 7, 0.5 --------- ................... ._ , ---------- 77, 0.0'
-0 50*~~
3/40:- .150,"., 200'
'250 "300." > 356 Dogrees
-2 --- 3 -4
-m 5 -6 7 -8
, 9 -- 10 -- 11 --- S.1.1612
- 13 - 14 15
'-- Noz. End . .,*ta I "'= Uphill I Downhill demarcation A
2:02 PM9/22/02 Nozzle 34 rescan Chart 1 Page 2 of 2
i I I AOY*LA7ýV FRAMATOME-ANP Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-iSI-100-09, PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5
.A Reactor Head Penetration MZU4AO-M:. AMP Ultrasonic Examination Data Sheet Customer: /,mc Plant: Fou,,., BS a Unit: I Penetration No.: _p , Procedure: gel- /S/- /00- -Of Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan fz- - 7 o.3 Ao313 16 Channel PIR N 1A ACCUSONFX'm Data Acquisition Software: Version,6.2.5
.CCUSONEX "Data Analysis Software: Version 3-_5- ?- , 6" Cable Length: 5O1 Type: f(.,- 1+A # lntermediate Connectors: I Calibration Block: 6o//93DO/ Calibration Setup:
Scan File No.: 4'24 ooS/-*2? Initial Calibration File:2z.,_.zs'.? 4 ;2Z6 ' /. o.' Final Calibration File: A .- t. -_os-. if.77 Scan Start: Z = ! 97> Scan Start: 0= -- Scan Stop: Z = l.Y' " Scan Stop: = .. J' Index Increment: 30 Chanipel Anqle Serial No. Comments
.3 C>'1.- "5 z5o z - FL>-
3 &Os 3-50?o 005 3So5 2 Results: QNqo Recordable Indications Leak Path Detected / Axial Flaws Detected Circumferential Flaws Detected Comments: , _ ,- , , , , I; 1 g.r" 6'TYPICAL DATA SHEET FIGURE 5 )ýA Page 31 of 32
A UJdLd *,.IIUCI. Customer: Nuclear Management Corporation
*,*r -
Plant:
-*.,II*i..I
* .t, .lg Il U'*l' Point Beach*
.oc-A lIEIIIIaLIUJII Unit: 1 Nozzle: 35 Procedure: 54-ISI-100-09 Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: - 0.625 Downhill Side of Nozzle (deg.): 196 End of Noz. (in.): 3.94 Ch 1 35044 Ch 6 35052 AxiSanla I ' Ideg deg. ,:, I;, Sto:., . Cet 3520 h7 na!1, SCh3 35070 Ch7 n/a Circ. Scan Start:[ - deg @1 47 Stop:I 365 Ideg @1 19' Setup:l 1 Ch4 35044 Ch9 n/a Files: A2266_00.48.29/A2266_01.31.03 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (In.) (deg.)
.. (in.) Ratio Orientation Min Max I NRI 3
5 4 5 6 7 8 9 10 12 13 14 15 16 17 Data Loc. 196 226 256 286 316 346 16 46 76 106 136 166 196 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 Inches MAX. 7.35 7.64 809 9.00 10 02 1071 1097 10.93 1023 933 8.42 7.72 7.35 MIN. 4.97 5.13 575 Inches 6.76 8.10 8.96 933 9.12 8.50 7.19 583 5.22 4.97 Inches Comments: Measured Thickness: 063 @theta of 105 deg with an axial position of 11.481 Limited Scan? (Y/N): N Analyzed by: , Date: 9-- 720 - Analyzed by: AJ /4 Date: 9/23/029,33 AM 9/2/02.33AMNozzle 35 Page I of 2 Page 1of 2-
Z Jo Z a6ed I, Mo43 SE IlZZON WO/f2IGV'V WS6 uoieoJewep Il!qUM*OG / ll!qdnflunn,.i pUBJ'ZONfJ.... K. - VV 9- 6-
-LI' I ---- 9 I 1
- - -- - - --- ------------' - -- - - " 9 0 VV-VpFV,V :'4t
- -- &;;...,.7...o] ..
... ,- ; .- . . .-4V.s .. .. .. os_.!
.... - .- -. ..- .- .-- . . .. .- . - . - . ---- .. . . . . -.. OSL, -.- --. ------ - - - ---- -." .....
0"p
---------- V----- -- ------------------
Il V' VVOV ----------- V --------- ------ *V*
--------------------------------------- ----------------------- 7-----
0"9' jot OTA V------------
... ... ... ........... ..... ........ ........- O'-/I.
V 9-. VVVtV V VV 4
*V.'VVV2V.'VV\.VJV 3*
i:.: opi *e
' *, . VV . ..Vt- "V.. . .. .. . .. 0" V:V,, , " VVV; V.".-V'V: V .V V. V '°
- dNV3V~~~IOVVM Vt 2.tt A.'
(
kOIZVIV7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE
)Remote Ultrasonic Examination Of Reactor H-ead Penetrations I PROCEDURE NO.: 54-IS1-1oo-09o PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
.*Reactor Head Penetration F=*A*,vIATO?.'!AMP Ultrasonic Examination Data Sheet Customer: NMC Plant: Po,,,,,,A Ie..,
Unit: Penetration No.: 3(0 Procedure: 6yqj'.-1,-4i-O90 Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -/z.7 o .,o3 16 Channel P/R A-'M ACCUSONEXm Data Acquisition Software: Version 6.2.5 ACCUSONEX mData Analysis Software: Versioný S-3. Cable Length: 5So Type: R.,- 3-ý # Intermediate Connectors: I Calibration Block: "6opil3D0/ Calibration Setup: 4Z*;-,Z,. g. Scan File No.: Initial Calibration File: A g
,4 7 (z* ".2 *5- 5 Final Calibration File: AnZs% 6 - oi-.. .37 Scan Start: Z = 0 .'q7 Scan Start: 0 = -5 Scan Stop: Z = I' Scan Stop: 8 St,7 Index Increment: 30 Chanr*! IAngle Serial No. Comments Z "1-1 -. 5 .o 2. -oF= D 3
,q
- &Os vz.I'g-35oO s so qt To dOse 3oC', .
Results: No Ecordable Indications Leak Path Detected I. Ax-mae Flaws Detected Circumferential Flaws Detected Comments: Analyzed-by: Level: Date: 9 ZZ'6, Reviewed by: .Level: 4iL Date: 16/K _ I,/ - I-.- - TYPICAL DATA SHEET FIGURE 5 jP *,- 23-l-- Page 31 of 32
0 FRAMATOM Customer: nmý ANI= Nuclear Management Corporation C....N... l. *UltrUnn V F~mglln, el I *i Plant: Point Beach fUluL Unit: 1 Nozzle: 36 Procedure: 54-ISI-100-09 INozzle Dimensions: (fh.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (dedj.): 350 End of Noz. (in.): 3.9 Probe Serial No.'s: Ch i 35044 Ch6 35052 Axial Sc~anL., t" .. ,= , __-_,___- _d_____:-top. . _Setup: Ch2 35202 Ch7 n Files. , " - ' . .. *" -" -' ., ' - , Ch Circ. Scan Start: ..-5Jdeg @ 0.47
,9" Stop:I 365 Ideg @1
- Ch3 35070 Ch8 n/a 1s[ Setup:[- 1 Ch4 35044 Ch9 n/a Files: - A226517.52.55 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 2
-3 4 -5 -6 -713 __,_ ____._ ___,\ - .. _ _ _ __ _ _ _ _ ,__
8 9 10 11 12 13 14 15 16 17 Data Loc. 350 20 50 80 110 140 170 200 230 260 290 320 350 Degrees WELD No. oc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3 90 3.90 3.90 3.90 3.90 Inches MAX. 6.74 892 892 9.41 1000 1037 10.44 1013 916 8.13 7.27 6.70 MIN. 6.74 inches 4.45 7.09 7.12 7.71 8.35 883 8 83 840 7.38 6.13 5.11 4 56 4.45 Comments: Measured Thickness:I inches 0 63 @ theta of 93 deg with an axial position of 10 3 Limited Scan? (YIN): n I Analyzed by: Date: 717- 7o, Analyzed by: Al/A Date: C-, i 9/22/027:58 PM Nozzle 36 Page I of 2
AW,
+: . t+-' .4141 3/4:- it- -' '3-6 P~ ro Id '
FRAMATOME ANIP , .- , -' I 105' 14.5w
+;..*.':..: .:_% ,. .*........... ...................
14.0, 13.5 13.0 12.5 ------------------
-------- 4--- ---- L .......... .
12.0, --- - -- - -4 -- - - - -- - - [EE t,1,11 ,-
------------------ -,. ................... ......... I -----
11.5 11.0 10.5 46 h' .S - 10.0 ......-.- -------------------- 9.5 --------------------- ---------------
------------- L-----
9.0 .............. --- ----------- 8.5 ---------- ---um oat" UVIMA Q SUM
' 8.0 ------- ------------- ----------------- -- - - - - - - -- - - -- - - - - - - - - -- - - - - - - - - -- - - - - - -- - - - - - - - - -- - - -- - - - - -- -- - - - - - - -- -- - - - - - - - - - - - - -- - - - - - - -
7.5 - -- - - - - -- - - - - - - - -- - ---------- ------ ------------------- ------------------- ------------- -- - - - -- - - - - -- - - -- - - - - - --- - - - - - - - - - - - - - -- - - - - - - 7.0 .. ......... ................. H --------- ------------------- ------------------- ------------------- ------------ 6.5 --------- ------------------------------ ------------------- ------------------- ------------------- --- -------------------------------------- 6.0 ------- --------------------------------- ------------------- ------------------- ------------------- -------- --------- ----------------------- 5.5 ----- ----------------------------------- ------------------- ------------------- ------------------- -------------- --- ------------------- -- 5.0 --- 4.5 4.0
- ..:--,-7 j-----------
L 3.5 -. --I - - - - - - - 3.0 --------------
-- --- L----
4- 'Downhill 2.5 ------------------ -------------
-c Slde-
.......... 1
.1 2.0 S --------
K-..' . .*+.. . -'.'
------------------- -- ---- -- -- - tV' ,
"4.',5 7 -o
-- ---- - ' ----.-- '-1,
*'. '1...+_. . ,,.' .
* - -u%
'4 -?0,. --------- I-- TOO " ., 4 0 0 ' .'. 4,. 4 4 eJ i' 4 - .. ' 4 ~t
-,' ,+1:
14
!--- .5 -6
-3 7
"9 10 11
'13 -...- 14 15 m-f-""Uphill / Downhill demarcation Noz. End 1
11:15 AM9/29/02 Nozzle 36 Chart 1 Page 2 of 2
I P0,11AAN? FRAMATOME.ANP NONDESTRUCTiVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations NO PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 4 Reactor Head Penetration FP4kUA-T E ANP Ultrasonic Exarfiination Data Sheet Customer: Ntwc Plant: Pwvr, B..A 1 Unit: I Penetration No.: Procedure: </2/-/ .- 9 Equipment: Description VH# Cal. Due Date SN# gTomoscan $vI -z7o3 16 ChannelP/R 1 0A i -s/A "/A ACCUSONEX" Data Acquisition Software: Version Q.2.5 ACCUSONEX'm Data Analysis Software: Version .3q-0 (9 . Cable Length: 560 Type: lZG +A # Intermediate Connectors: I Calibration Block: 4NI/I3DO/ Calibration Setup: 1Scan File No.: Azz&.- . Initial Calibration File: q}ZZ,,z- /b.;S.3O Final Calibration File: A- 2-zX6-o.-s' ). .7 Scan Start: Z= 0q.wl"Scan Start: e=-I5 Scan Stop: Z I'V"Scan Stop: a 3(. r Index Increment: 30 ChanrnI Angle Serial No. Comments 1 6" /. Z 3*O0I- 135z2oZ TOFD 3 &-SO -35 o70
" .d5*- 3 orz 50 52.
36 Results: -Ilo Recordable Indications, Leak Path Detected
-- ial Flaws Detected Circumferential Flaws Detected "Comments:
Analyzed by: evel: Date: 9 LZ
-Reviewed by 4- Levelr' -- / Date: 6'/~~
TYPICAL DATA SHEET (k 6 ,,1-3b. v FIGURE 5 PFage 31 of 32
-'I A
Customer: Nuclear Management Corporation ..... S. flMI .. l ssa. Plant: Point Beach c .u L..AcIIEEI
-U EULIUII
".-a. U" L LJOLO Unit: 1
.JiiL Nozzle: 37 Procedure: 54-ISI-100-09 INozzle Dimensions: (4n.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (degl.): 0 End of Noz. (in.): 3.83 Probe Serial No.s: Ch 1 35044 Ch 6 35052 Axial Scan' -.Start:l. deg..l@Its, -. , - Ideg, @[ " , ',Setup:lL Ch27 h n/a Flies:' . . . . .- ,. , -h . .... ch3 35070 Ch B n/a Circ. Scan Start: =J5deg @ 0.47 " Stop:I 365 Ideg @I "9. Setup:[ I Ch4 35044 Ch9 n/a Files: A226514.03.14 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 nl/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 2
3 4 6
-7 9
10 11 12 13 14
'15 16 17 Data Loc. 0 30 60 90 120 150 180 210 240 270- '300 330 360 Degrees WELD Noz, Loc. 0 30 60 90 120 150) 180 2:10 240 270 300 330 360 Degrees PROFILE Noz. End 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.83 3.93 3.83 Inches MAX. 7.60 9.35 9 54 9.73 10 21 10 54 11.11 11.00 10.64 9 74 8.78 8.02 7.60 inches MIN. 5.41 7.12 7.17 7.69 8 07 8.55 19.35 9 35 8.74 7.60 1646 5 89 H .41 lInches Comments: Measured Thickness:; 0 63 @ thet of 1 2121 deg!with an axial position of 13 28 Limited S'can__(Y/N): n I.Analyzed by: r--"Date: t? /ZZ../a.Z Analyzed by: ,j,, Date:
6' 9/221024 08 PM Nozzle 37 Page I of 2
V'.' Nozzle 37 Pir'ofile ~ FRAMA-TOMrE ANP Il 14.5 ---.- ------'--- _;_ --... 14.0 -----........... I t 13.5 ------- -------. .. 1---- ---------- ---------.... ------------------ 13.0 ----- - - - ---- -- -- - - - -. ------------------ ------------------ ------------------ ---------------- U hill c,' 12.5 - ------------------..
------------------ ------------------ Side',
iiiiiiiiiiiIiiii 12.0 -- 11.0 -------------------- ii 11.5 -- -- - - - - -- - - - -- - - - - -. -------------------
--------------- W--
- W..................
10.5 ------- ------ ------- ------------------ --- 10.0 ------ ---------- I'll ----- -------- 9.5 ~ 9.0
.ma"MIUM11"lmMUMmo
----- ---------- ---------------- ------------------ZZI ----
4~C~~4 - S........................
.u4mL,~4j4~u. b,.4.i
.,'~..,.,..
......... *lqq*qq*U*
U N*]iEIN*UmmU*M* WOMOMMUqý U] Im 8.5 --------- W-- ------------------ --------------- ------------------ ------- - -- U- .. ------------------ . 8.0 -- --------------- ------------------ -L ------------------ ------------------ U 7.5 ------------------- ---------- ----- ------------------ ------------------ ------------------ Ný- ----------- 7.0 ---------- ------- -------- --------- ------------------ ------------------ ------------------ -------- -------- ------------------- 6.5 ----- ------------------ ------------------ ------------------ ------------------ ------------- ---- 6.0 ----------------- ------------------ ------------------ ------------------- ------------------ ------------------ :ýý 5.5 -------------------- ----- w------------- ------------------- ------------------- ------------------ ------------------ 5.0 ------------------- ------------------- 4.5 - -------------------- r------------------- t------------------- 4------------------- ------------------- 4.0 -------------------- ----------------------- -------- w------- --------------- -------- - - --------------------------- ---- - --- *1---
- 3.5 ...................................... ---... - ------------...
3.0 -- - - - - - - - -- - - - - - - - - --- - 2.5 ------- ----------------- Downhill 2.0 -- - ----------- - -------------- ------------------ Side 1.5 -----
..---.-.. . --------------- ------------- W 1.0 - ---- -- :- .. ---- ---.. ------.
.. ----- ----------- --.. -------- ------ t. '4 ,'
0.5 ------------- -- ---------------- ---------- --------- -------------------- 2- -. 0.0 . f -t
, 00 . . ... ,~, 0 . . . , " 100 150 200 250,'-- 300-Degrees
-2
*7
-4
-6 -8
-9 -10 U- 11 --
-13 14 15 S..1612
- -Noz. End .,saa.a1 """"l H " Uphill Downhill demarcation 4:08 PM9/22/02 Nozzle 37 Chart 1 Page 2 of 2
c'gC FRAMATOME-ANP riut-'ItuLIvJ u.XzAMI TUrN PRUOEDUURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-1So-I 00-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration rR.4Aut= mAAmP Ultrasonic Examination Data Sheet Customer: W MY*C Plant: )e,.k
-,e Unit:
Penetration No.: ?g Procedure: 5/- is,-./oO-i Equipment: Description VH# Cal. Due Date SN#
.Tomoscan &/*./o3 qo14q 16 Channel P/R N /A NI,AA ACCUSONEX"" Data Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version .
Cable Length: Go' Type: /.- ;,-q # Intermediate Connectors: I Calibration Block: (.o/J13oe/ Calibration Setup:
'Scan File No.: 7:,; 7, *7i ,- . Initial Calibration File:4,'2C&_/I. 2 *. 99 Final Calibration File: c o,..riwivCt prrz-mHA Scan Start: Z = - " Scan Start: 0= -s- Scan Stop: Z = S*.5 Scan Stop: 0 =..° Index Increment: 30 ChannlI An le Serial No. Comments Results: <o-Recnrrfnhl. Indi pn~ss Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
MAnnalyzed by: * .... __Level: 72ý Date: *. ,'-*-. ,Reviewed by: Leve TYPICAL DATA SHEET b FIGURE 5 Page 31 of 32
Ack CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 38 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i*.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 36 End of Noz. (in.): 0.43 Probe Serial No~s: Ch I S0420CN Ch 6 nla Scanl.. ~~.. Axial S.... ,.
;t,ý Start:I-,, ',d .,. I.sop; ,."Ideg @ '%...t" Setup: I Ch2 n/a Ch7 -n/a
~ . \ : ~~ u.. ~ .. ~Ch3 n/a C8n/
Circ. Scan Start: deg @L-5 -07 " Stop:I 365 Ideg @1 5.98' Setup: 3 Ch4 n/a Ch9 n/a Files: __ deg_@___ ___ Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface10C to Min Min Max Max DM__ Nozzle_ TotalUltrasoni Min Max Examination Total Length DataShee Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI._ 2 3 4 5 6 7 8
-9 10 11 12 13 14 16 17Data Loc. 36 66 196 126 156 186 216 246 276 306 336 6 ,36 Degrees WED Noz, Loc. 0 30 60 90 120 ISO5 180 210 1240 270 300 330 360 Degrees PROFLD by:_______Noz. End Anlye 0.43 0.43 0.43 0.43 0.43 10.43 0.43 0,43 0,43 0.43 0.431 0.43 0.43 Inches POIE MAX. 3.12 3.15 3 29 3.44 3 68 3 82 3 87 3.84 3 71 3 47 3 26 13.18 3.12 Inches MItN. 1.81 1.93 2.06 2.31 2.47 2 .59 2.7'0 2.62 2.41 2.17 2 00 11.90 1.81 Inches Comments: Measured Thickness: 10.63 theta of 191 deglwith an axial position of 4. iited Scan? (YIN): N Analyzeby ,*"J* P Da te:T ,- -,70 2-.- Analyzed by: i- Date:
/ t4 01.2q.0-L Noz 38 P5age 1 of 2 9/24/028:34 AM
6C ZON Z0/IrZ;/61/NV 1V:8 Z 10 Z e6ed J 1e4O At 21 uoj1eoaewep IIJqumoQ / IIlqdn'l,,,,.,, PU3 "ZON m-,,.. '
'I L OL 6 cL 9- 9-
I 9m
,' 4 O *,,
'44
* .1/4 ',.V /~ "4 - 4 .4 , C'::,
.. . .. ", .r,' .
,09o OS0l,,.
og', - . ,, ,00 4-: 40"0
- i I
I 4-1t 0---- m----- - -..
-' GLZZ ,,;- - '
OI ;......:....
'-'- - '--'7 - '" t. ... . 0
.................. ----------------- . .,. o ........ ---.. .. .-- .. S' ............... .
[---- ............ i ..... ... *.o eplS , ..4.............. IlII4UMOQ
- ----------- "a"D iI*
habili*iidilddl* lililBii*ilililllDg tlllBOiH 7------- ----- ----_--,
,"No2D4l14n4i~4~~p44l4l~~~fl4fUf~l Inmmwm AIM mn~ummimownrnIlm n 11 lwlwýwum
--- -.-- z ---------- .................. ---------------
----------------- I I-I
----------------- .................. -----7:77 ý-7. ---------- - -. .-. I.. . -.-----------. . ---. ---------------0".
----------------- ---------- S...... ..................................... a's'
----------------- .-................. I
---------- S......
. 0"9 9'9 S6T
.................. S..................I i-.................
*------------------------------- oloi 0'9
- - 9 '9 S..................
---------- ....... , ................. ................... 0'6
----------------- S..................'
i..................
---------- S....... ................. ...................
. . .. .. . . . . . . . . . .. . .. . .. -6
'61.
---------- I------
------------------ ----------- 4.......................................... O'44 T.k I-.................
...........S.. . . . . . . ........... w -- - --
- ---6~
. .'to*59
............. ........... .. . . . . . ........... w0"0/--- ................ - --- -- ,
- -4~4- .. : .......... ----------
------------ .......... . . . .. ..~~~-i .. . v.. .. . .. ..... ,... . . '/ /
f : -; --it
------------ .......... --- -------------- -- --- 'k
"----------4
- 4. 444
.4'$444 44j 0"444,
!elIUOJd 61: GlZZO'NO
"A..
Ji 4 9* - Nozzle 38 Profile FRAMATOMEANP , 15.0" 1...... .. .. - ..- . .. . : --'. ".*9 / ,99 *"
"14.5- ......-- ----------------- --------- ------ ---------------- .....................
14.0 -- - .....
---- -- ---------- ------ *i.................. -i 13.5 ----------- ---- ; .
....... --------- ------ S.................... _. 1,,
13.0 ----------------------------- L..... ......... ........ *i.................................... 4.................. ---------- S Ide 1 2.5 ------------------------------------- ..-----... -------- .i................. 12.0 11.5 ----------------- ---------------- ---------------- ----------------- - 11.0 ----------------- ----------------- ---------------- ----------------- I ---------------- ----------------- ----------------- 10.5 ----------------- ---------------- ----------------- ----------------- ---------------- ----------------- ------------------ ----------------- 10.0 ----------------- ---------------- ----------------- ------------------ ----------------- 9.5 ----------------- ---------------- A--------------- ----------------- 9.0 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- 8.5 ----------------- ---------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- ---------------- 8.0 ------------------ ----------------- ----------------- ----------------- ------------------ ------------------ ---------------- :. ----------------- 7.5 ----------- L--------- I -
----- - --------- ----------. j------J-----I -----.- I------------------ I ------------------
7.0 ---------------- -----------1& ---- ---------------- --. p °-- ............... 6.5 ---------------- ---------------- ------------------. 6.0 ---------------- ---------------- .
------------------ ----------------- r------------------.
5.5 ---------------- ---------------- - - - --- - -- - --- -- --.. .---....... .......--- 5.0 ----------------- --------------- -----------------. 4.5 ----------------- ----------------- ------------------ 4.0 .......... ...... 7 3.5 3.0 ----------------- ----------------- -----------------
---------------- ----------------- ------------------ ------------------ Downhill 2.5 ----- I------------- -------. . : .- . . Side-,
2.0 ------------- ----------------- ---------------- ----------------- ----------------- -- 9 1.5 ...............I 7------- ----------------- ------------------ 9- --- --- -- 7 ------- 1.0 - - ----------- ----------------- -----------------
- . . . * .. .- S............ kl=ki*...*..-;.
-------- -d-do-0.0'. "~ .. .. .~ .
0' 50o *1 I1 2007> 250'
*7 4
-6 -8
-10 -*-11 -12 9 9- 15 ---- 16
-13 - *14
"--'-Uphill / Downhill demarcation Noz. End I
Noz 38 Chart 1 Page 2 of 2 8:34 AM9/24/02
CiC FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCF=tURE* I3LA. Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-IS11I 00-09 PQ NO.: PQ-100-1, 54-PQ-1 00-2, 3, 4 and 5 A Reactor Head Penetration rFMAT'rOMZ-AMP Ultrasonic Examination Data Sheet Customer: W] MAC- Plant:- 5e-.k,c'/-' Unit: Penetration No.: y9 Procedure: 5'1-i1s- o0-'O Equipment: Description VH# Cal. Due Date SN#
.Tomloscan' "" 1 ,J/.-L 3 2.Ozgq 16 Channel P/R N/A r/. "]1A ACCUSONEX'm Data Acquisitidn Software: Version 6.2.5 ACCUSONEXm Data Analysis Software: Version 3 -7.V a" Cable Length: Got Type: *&.- t4-q-T # Infermediate Connectors: i Calibration Block: 6,,o/q3o0/ Calibration Setup: "Scan File No.:$,R?,,<7- o5 . -.T/7 Initial Calibration File: .22 ,/4,'4511111 Final Calibration File:e,,Aj-T*JUc-b 16-1b4 _
Scan Start: Z = -. - Scan Start: 0= -S Scan Stop: Z = 5, -"Scan Stop: 0 = 6X Index Increment: 30 Channel Angle Serial No. Comments I 5O Results: No Recordable Indications 2 Leak Path Detected /. Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: Level: Date: ,9-, ,7-. Reviewed by: Level: Date: ,- . TYPICAL DATA SHEET FIGURE 5 0ý (i ti Page 31 of 32
A CRDM Nozzle Ultrasonic Examination Data Sheet ICustomer: Nuclear Management Corporation Plant: Point Beach, Unit: 1 Nozzle: 39 Procedure: 54-1S1-100-09, Nozzle Dimensions: (in.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.4 Probe Serial No.'s: Ch I S0420CN Ch 6 n/a Axial Scan t c;MSr.deg- I*'*.Stop:- T..: Idei.' ,,"
-etup:L,.a. Ch2 nli Ch7 n/a es~~~"~ ;', ~* Ch3 n/a Ch8 n/a Circ. Scan Start: L___ -j5deg @L-07 " Stop:1 365 Ideg @1 591' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_03.27.51 Cal Block SIN: 60119300 ChS n/a ChlO n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 12 T NRI 3
4 6 7 8 9 12 113 14 16 17 .... Data Loc. 0 30 60 90 120 150 ... 180 210 240 270 300 330 360 Deg ree.. . 0 30 60 90 120 1150 180 210 1240 270 300 330 360 Degrees WELD Nloz. Loc. POIE Noz. End 0.40 0.40 10.40 0.40 0.40 0.40 0.40 0.40 10.40 0.40 0.40 0.40 0.40 inches POIE MAX. 3.14 3.14 3.29 3.49 32.84 67 3.79 3864 3.76 2.94 32.79 63 32.58 43 3.32 3.18 2.39 "'2.27 3.14 2.24 inches Inches MIN. _ 22_4 2.34 2.51 2 69 3.02 2.99 Comments: Measured Thickness: 0.65 @ theta of 143 dogwith an axial positiono Limited Scan? (YIN): N Analyzed by: Dat:_. A b FJ A- Date: P_- - 7- A b Il W Oc.tY- oZ..-? Page 1 of 2 9/24/028 35 AM Noz 39
r... FRAMATOME-ANP NONDESTRUCTIVE FXAMINATInNI p~nflr*!flhIp Remote Ultrasonic Examination Of Reactor Head Penetrations NONDSTRCTIV EXMINAIONPROCDUR I PROCEDURE NO.: 54-iSI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1kReactor Head Penetration P=A-UAT A, M*,tP Ultrasonic Examination Data Sheet Customer: W MC, Plant: At I3eqc..- Unit: Penetration No.: if 0 Procedure: 5L1- Isi- 1o0 Equipment: Description VH# Cal. Due Date SN# gTomoscan "/ozzq 16 Channel P/R N/A N1 I 1 ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version g 7. I' a7" Cable Length: S CI Type: lZe- t4rq # Intermediate Connectors: Calibration Block: *6,o!/,/3o06/ Calibratiori Setup: Scan File No.:. . .. ;Y/.c'2. Initial Calibration File:jqi 2/ q.:Ug q Final Calibration File: c.,-mivE_ 'p ,". N 11.*. z Scan Start: Z = ,-.? Scan Start: 0 = -" Scan Stop: Z = S..'Scan Stop: 8 =3S' Index Increment: 30 Charmel Angle Serial No. Comments I 5"J. oq-2o Results: o Recordable mndic Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzed by: 4,.,' f-,,, Level: Date: 9- ?_T-e7 Reviewed by: Level: Date: /Z. TYPICAL DATA SHEET ul - 0 r' . Z,1 "0 L." FIGURE 5 Page 31 of 32
A FRAMATOME ANMP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 40 Procedure: 54-ISI-100-09 INozzle Dimensions: (Kt.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 0 End of Noz. (in.): 0.36 Probe Serial No.'s: Ch I S0420CN Ch nl/a Fig,-@ 0p de @It z- '--,',,Setup:I Ch2 n/a Ch7 n/a AxiaScak*nCh4,-St3rt:I , Id3o,-t@ ,, 'Stop.I ,*;. Ideg - ,-h3 n/a Ch8 n/a Circ. Scan Start:[I -_Jdeg@I -0.7 " Stop: 365 Ideg @1 5.98 - Setup: [3 Ch4 n/a Chg n/a Files: - A226704.31.02 Cal Block SIN: 60119300 Ch 5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWO Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI -, _" 2 ' 3 4 5 6 7 8 9 10 12 13 14 Is 16 17Data Loc. 0 30 60 90 120 ISO 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 160 90 120 1501 180 210 1240 270 300 330 360 iDegrees PROFILE Noz. End 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.363 0.36 0.36 0.36 0.36 0.36 Inches MAX. 2.78 2.78 2.93 3.32 3 26 3 46 3.51 3.4"1 3.36 3 22 2.88 2.88 2.78 Inches MIN. 1.53 1.67 1.86 2.21 2 35 2 40 12.45 2.25 12.06 2.01 1.82 11.77 1.53 Inches Comments: Measured Thickness: 0.64 1@ theta of 357, deg with an axial position of ... 4.47 Limited Scan? (YINI: NI 1Analyzed by: ,",..**' . Date: * ,7- -. Analyzed by: t-.I -/* Date: 4 c4 00Y-2V-u-L 9/24/028:34 AM Noz 40 Page 1 of 2
- - 4 . -444* ,4....
4 4 4 *'4'44 F. .444 Nozzle 40 Profile '4
- . -. - 1/2,
" " FRA'ATO M rMANP 4, 44 44 ,4 4 .4 4 -- 4.
'15.0' 14.5.-------,""' - ------------------- 4.
14.:-------. ---------- -----
---------------- ---------------- --- I -------------
, 30_ . ...': -,........ ----- ----------- ---------------- I ------------------
13.5--------------------- ----I------------ I4 . I 4, 4 13.0----------------..... 12.5 -- --------- --------------- I - -----------------
~12.0:--- --------------- .......... ----------------- -----------------
11.5 - -------- ..... ------------------ ----------------- ----------------- ----------------- 11.0 ------------------ ---------------- 10.5 ....... : .......... ----------------- ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- V.--------------- ----------------- ----------------- 10.0------------------ ---------------- ---------------- ----------------- ----------------- 9.5 ------------------ ----------------- ----------------- ----------------- ------------------ ý\ --------------- ------------------ ------------------ 8.5----------...... 8.0 1 .---------------- 7.5 ------------------- --------------- ---------------- ---------------- -----------------. ----------------- ---- --------------. 7.0 -----------------------------..... ---------------- ---------------- -- -- -- -- --
----------------- -- - - - -- - - I-- ----- .. ... ...
6.5 -----------------.--------------- ---------------- ---------------- ----------------- ------------------. 6.0 -----------------.--------------- ---------------- ----------------- -----------------.. 5.5 ------------------.--------------- ---------------- ----------------- ------------------ ... 5.0 ------------------- --------------- ----------------- ------------------. 4.5 ------------------.--------------- ---------------- -- ------- -- -------. 4.0 -------------------.-.-------------. ---------------- ------------------ 3.53.o ---- ---- ----- -- - ---------------- m hfnf-- --- n4tiuF4 M VM! L 4umIuiIl44muat.uIu.mNg4I4 23 . 444...... .......... 4.. . . -------------- 2.015 ------------------------------------.. Downhill
----------------- ----------------- . ----- Side, 2.0 .. -- ' ------
7 -------------- ------------------ ---------
- ------------- I--- ---------------- -. ---, --- -' .
- ------ S4-------------
- 1 .5 - -- - ---- ---- ---- --- -4 1 -4 .. -4 4 '4 4 1' .
.4' 4
1.0~~~~~~~4 100~ - 150 ~200 , 250 300'U 4,4 4
- ,, 4'
, S Klý ý*
44 4 14' .'-I'4.J." '444 4 -. 4 j.4,4
."'L4 "r*:. ,": '" 4' 4 4 '.4..*4 4.4 A
-2 3 -4
-8 Iz5 -6
-- 10 7
11 -12
-9 -- - - 15 -.---- 16
-113 14
~- =-- 1 "-"m-Uphill/ Downhill demarcation Noz End 1
Noz 40 Chart 1 Page 2 of 2 8:34 AM9/24/02
FRAMATOME.ANP Remote Ultrasonic Examination NONDESTRUCTIVE EXAMINATI1ON PROCEDURE Of Reactor Head Penetrations PROCEDURE NO.: 54.s-1S100 A Reactor Head Penetration PRUA'ar*A1AN- Ultrasonic Examination Data Sheet Customer: M`J rr l Plant: i, Unit: ' Penetration No.: L I Procedure: 59- is,-.,oO-o'i Equipment:
,Description VH# Cal. Due Date N#
gTomoscan n "/' sq 16 Channel P/R NA N/A ACCUSONEX' Data Acquisition Software: Version 6,.2.5 ACCUSONEX Data Analysis Software: Versior5- *."" Cable Length: Soo Tpe: i- -Tpe # Intermediate Connectors: I Calibration Block: *o/,jq3o,'/ I Calibration Setup:
"Scan File No.: f 2.2 _O . ' 7 Initial Calibration File: R*ee,_4. VC.qV Final Calibration File: c,,AnvvUD erA.r " *'.-- .
Scan Start: Index Z =7.7' Increment: 30 Scan Start: e 5 Scan Stop: Z s-~9? "Scan Stop: 0 =.5$D-' rV Channel Angle Serial No. Comments
/ 5O°*- 509 eCAJ Results: uReodble Indications Leak Path Detected Axial Flaws Detece I Circumferential Flaws Detected I5 Comments:
Analyzed 15v: Level: z Date: .. ~-,~ .Reviewed by: Level: "Date: YTTYPICAL DATA SHEET FIGURE 5 PFe 31 of 32
A F R AMATIM E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation . Plant: Point Beach Unit: 1 Nozzle: 41 Procedure: 54-ISI-100-09 Nozzle Dimensions: (ia.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 30 End of Noz. (In.): 0.47 Probe Serial No.s: Ch 1 S0420CN Ch 6 n/a I Axial Scan ,i" - Start:_LL,.L deg, @I 'I Stop ,J,"dei, ,Setup: '. Ch2 n/a Ch7 n/a
- ~
' ~ ' ' ~ . .. Ch3na Chna Circ. Scan Start: -51 deg @1 -0.7 " Stop:I 365 Ideg @1 598' Setup: 3 Ch4 n/a Ch9 n/a Files: A2267_05.39.37 Cal Block SIN: 60119300 Ch5 n/a Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max i NRI 2
-3
-4
-5
-6
-7
-8 9
10 11 12 13 14 16 2~~ ___ C__ 11(_ 1 __. 17Data Loc. 30 so 90 120 150 ISO 210 240 270 300 330 1360 30 Degrees 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz, Loc. 0 30 60 0.47 0.47 0 47 0 47 0.47 n.47 0.47 0.47 0.47 Inches PROFILE Noz. End 0.47 0.47 0.47 0.47 2.99 13.18 13 62 3 66 13.66 13 66 3 61 3 47 3 42 13.38 3 28 2.99 2.99 inches MAX. 1.87 1 187 1 2 41 2.45 1 2 55 1 2.65 2 45 2.36 -2.16 1 2 02 1.98 1.78 1.87 Inches MIN. Comments: ' Measured Thickness:1 0 63 @ theta of 1 3581 degl with 'an axial position of 0 961 Limited Sa?(I)
. Date: 9P-2*.7 - Analyzed by: A/i/t Date:
Analy zed by:. /_=_* Noz 41 Page 1 of 2 9/24/028:34 AM
Z jo Z 96ed abed:eq L HJtl IZON ZO/tZ/6nV VC:8 uo1180jewep IIIIumolUO 1 ildfnnnnwu PU3ZO . 14 ___ 6-9 L 9 17-AC) ge ON OM 09 0.. 09z ooz 0M IA . 00I , C' 0 , A *. "A A
'I 910 0*L.
97
,,epums mI C
* , A l -u-uu~
-C - - - - - -- -- - -- - -I- - - - - - -m
- ur -u - - - - u- i u- -n - i w ~ n-uh~
- -n-um7ai - - - - - - ~
- -- ~
- -- ~~
- -- - -- ~ - -- d1 - ---- - -- - - -- ____ _. .. . .. . .. . .. . .
I-Al- ---- 0.5P 9*5
....I... ---
.... -------I---- ----------------- --------- --- ------------- I--- ----------I- ------------- I ----------- --- O' 9.9'
................. ----------------- ----------------- ---------------- ---------------- 0,9
-------------- :--. ---------------- ----------------- .................. ---------------- ---------------- 9.9
.................. ----------------- ----------------- ------------------ ------------------ ------------------ .... 1------------- ----------------- 0'L G9L 9's 0'6 9*6
----------------- ........ I-------- ----------------- -----------------
O*Zk GZt
---------------- 0 . ct
-- --- r - -- - -- -- - -
-- -- -- I-- -- -- - -- -- - -- -- - -- -- -I- -- -- - -- -- --- -- -- - -- -- -
OIS
............ ---------------- .c 9-f C;
I_________ - I_________ I _________. _________ I_________ I - J n-fl A VZI' A ,c -' EINV OV0.LVVC1VU: A' GIlUld. LP GIZZON
I R.,> -ýAA
/V?
FRAMATOME-ANP --8* NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3,4 and 5 Reactor Head Penetration
*AMA'*tOE AtOP Ultrasonic Examination Rata Sheet Customer: hN1'c Plant: Po,,',,' Bt,,A Unit:
Penetration No.: Procedure: 6-q-Is/1 1,04--Of Equipment: Description VH# Cal. Due Date SN# gTomoscan 17 16 Channel P/R A- t4J/A 1A/ ACCUSONEX'm Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version *33
*3.*
Cable Length: 61o Type: 1Z(.-V-.z # Intermediate Connectors: I Calibration Block: 6o//I 3vE/ Calibration Setup:
'Scan File'No.: , -- . 3-I Initial Calibration File:
Final Calibration File: 1;z2-2 6-or. 11 .. 2 Scan Start: Z = 0. 141L Scan Start: 6 = .5 Scan Stop: Z = 1?. %Scan Stop: 8 = Index Increment: 31 Channel Angle Serial No. Comments I 6 . 35oqq Z 3o'- 35.zoz -oF D 3 &o"'s 35o00
&Cr5e- 3 60$7Z Results: < [--J cordable Indicati-ns Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed 6~y: -Z" Level: Date: / 2 Reviewed by: .--- .Level: z-i7 Date: /-27, L-01,'
ý-k &ný TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
7A
-10 At Customer:
,, -Nuclear
..... Management Corporation .. . Plant:
*. ,, v ~Point Beacho U1.tIIum I,..^nllllllLtlUII UdLdlnit:{)[~Le 1
Procedure: 54-ISI-100-09 Nozzle Dimensions: (ih.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 136 End of Noz. (in.): 3.74 Probe Serial Nos, Ch i 35044 Chi6 35052 Axial S " " Sh7 @ d " ettp: Eh 2 35202 nda Fillp:* ---- Ch3 35070 Ch8 n/a Circ. Scan Start: -5 deg @ 0.47 Stop: 365-deg @I 17.6
' Setup: I Ch 4 35044 Ch9 n/a "Files: A2265_13.02.53 _____________ Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Ad ted Circ. Extent Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Mm Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-21314 16 11 "17 -8 Data Loc.! 136 166 196 226 256 286 316 346 16 46 76 106 136 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Ders PROFILE Noz. End 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 3.74 Inches MAX. 6.79 7.00 7.31 7.74 8.19 8 48 8.51 852 8 24 7.67 7.19 6.92 6.79 Inches MIN. 5.28 5 48 5 81 6 25 6.90 7.29 7.36 7.35 6.73 6.16 5 82 5.48 5 28 ;Inches omet:Measured Thickness: 0 64 @theta of 0deg with* an axial position of 5 93 Limited Scan? (YIN):I n ________ Analyzed by: .,.-".,* *,.*.Date: */_*]0. Analyzed by: v*/A" Date: 6'/ 4 0'3-IDI£ 9/221022 51 PM Nozzle 42 Page 1 of 2
-- I 4.
* - C -. .4 45 Nozzle 42 Profile FRAMATOME ANP 7.
15.0 14.5 --- - --*-- --- - ----- "- 'IF r r 14.05......-........ 2t...... ..... --------- ------------------ 14.0 ---- - - -- -- -------- ------------------ .. - ------ 13.5.................... -------- ------------------- ------------------- ------------------- ------------------- 13.0 ............................... -------- ------------------ ------------------- ------------------- ------------------- 12.5---- -------- 7----------------- 1 11 ----------------- ------------------- 12.0 ----.... .......... ------- ------------------ ------------------ ------------------- ------------ ----- --- -- . .. .',,.. . . 11.5 ..........- .......... 11.0 ....................- ......... -------- ------------------ ------------------- ------------------- ------------------- ------ ,--- ------------- ----. 10.5 - ............. -.......... -------- ------------------ ------------------- ------------------- ------------------- - - - - -- - - -- - - - - - - - - - -. 10.0 ------------------ -------- ------------------- ------------------- ----------- ------- ------------------- 9.5 ------------------------- -------- ------------------ ------------------- ---------- 9.0 ..................... -......... -------- ------------------ -------------------- ----------- -------- -------------------- -------------------- 8.5 .............................. -------- ---------------- ..........................
, 8.0.................... -------- ---------------- ----------
" 7.50.............. ------ f 4 1U4M4
............... I nuuuuuauus alIUnflhIflmE 7.0.............. -------- ------ ---------
5.5 -------- ------------------- ------------------- ------------------- ------------------- 5.0 ......................-......... -------- ------------------ ------------------- ------------------- ------------------- 4.5 ..................... r.......... --------- ------------------- ------------------- ------------------- ------------------- 4.0 ......................-......... I I 1 ------------------- -------- q 3.5 ....................-- -------- I
-S
- 1 I-
.i 3.0 ............................... -------- - -- - - - -- - -- - - - - - - --.
25....................
- ........ -------- --------------- ---- I ----- ---- ---- ----- ---- ..........
---- . . . .. * . Downhill 2.0 ....----........-------- --......... t-------------------. ------------------
------------------- - ------- ----- Side :
1.5 ---------------------------------.. -------- ------------------- --------------- .--- ..--- ........---- . . -*-- -- -- -- 1.0 .... .... -.... - ... 20 ------------------ --------------- ---------- . .. .. ...--.. .. .. .. . ..--- '** 0 .5 . . . . .'--....... - --.... ...... --------- ------------------- ---------- --- ------------- - .....--- ..... ... ,, .. _ , . .. , 0.010 I I I O0 50 250 - " * .300',-:., 350;, '
- 100 150 D 200 05
- , ,,.'D egrees -- 12.
-2 -4
-6 7
-9 -10 - -- 11
-13 -- 14 15 ------- 16
-Noz. End --INP"Uphill / Downh ill demarcation 2:51 PM9/22/02 Nozzle 42 Chart 1 Page 2 of 2
I V FRAMATOME.ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 4A Reactor Head Penetration t=*J* :*TM.I .AN Ultrasonic Examination Data Sheet Customer: /4rlC Plant: P/,Ai', 8-,,2cA Unit: I Penetration No.: Procedure: q-j-,-/O- ' Equipment: Description VH# Cal. Due Date SN# 4Tomoscan " z-t1u* z7 o .3 A0317 16 Channel P/R 1 1A* ACCUSONEX Data Acquisition Software: Version 6.2.5 ACCUSONEXM Data Analysis Software: Version23-.- ?.y " Cable Length: 50o Type: Rc. -U-+41 # Intermediate Connectors: I Calibration Block: e0o// 3DO/ Scan File No.: ,z.' / Calibration Setup: Initial Calibration File:/,?;:z4.. Final Calibration File: ,*-=ctz 2r. 31.
-or, I?, '"7 r
Scan Start: Z- 7q Scan Start: 0= -. ¢ Scan Stop: Z= l'i.o" Scan Stop: 0 ;$ Index Increment: 30 Channel Angle Serial No. Comments Z ~-*°. 5 zo z- -roF D
.3 . 1,"0 35070 q qv.S'zý5 S so Vy To Results: iF-ecordable Indications Leak Path Detected /
Axial Flaws Detected Circumferential Flaws Detected Comments: ', , ,r. %a ox C-r-k VkP 1 -0' Analyzed bv: Level: Date: -- . Reviewed b : Level: 'Date: TYPICAL DATA SHEET A') FIGURE 5
ý511 Page 31 of 32
AN *. CRDM Nozzle Ullirasenir 9Fvrnimn2*re-n ri Qk f Customer: Nuclear Management Corporation Plant: Point Beach jUnit: 1 Nozzle: 43 Procedure: 54-ISI-100-09 Nozzle Dimensions: (i.) ID: 2.750 OD: 4.000 Thickness'. 0.625 Downhill Side of Nozzle (deg:): 48 End of Noz. (in.): 3.6 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scant*¢ .. Start: j deg @ j "< Stop:. Ideg Ca Setlip;: . Ch2 35202 Ch7 n/a Filies:, , ,. c S " ; ' , " " deg S 12 ;.Ch3 35070 Ch8 n/a Cir. Scan Start:22.66deg@L*5j" Stop:0 19 ideg @I 365j' Setup:[1 Ch4 35044 Ch9 n/a Files: A2266_04..1.55 Cal Block SIN: 60119300 Ch5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI _ _ _ 2 A
-3 4
5
-6 7
8 9 10 12 13 14 15 16 Data Loc. 48 78 108 138 168 198 228 258 288 318 348 18 48 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 Inches MAX. 6.86 690 7 04 7.41 8.02 8.39 8 58 8 39 8.16 7.69 7.33 7.08 6 86 Inches _MIN. 4.76 499 537 569 6.25 6 81 6.95 681 6.39 5.88 5.39 5.12 4.76 Inches Comments: Measured Thickness: 0 63 @ theta of 6943 deg with an axial position of 944 Limited Scan? (YIN): N Analyzed by: Date: - Analyzed by: Aj Date: 9/23/029 34 AM Nozzle 43 c ?/'4a... Page 1 of 2 I
,-Nozzle 43 Profile ., . :, .. '*;- .
FRAMATOME ANP 15.0- ,
- 14.5,------- --- ------------ ---------- I ----------------- -----------------
14.0 ---- --- - -- - -- -- - - -- - -- ---------- ----------------- ----------------- ------------------ ---------- 13.5 ---------- ----------------- ----------------- ----------------- --------------- 13.0 ........................................... ---------- ----------------- 12.5 -- 12.0 -..----- ....--------- 11.5 ------------------- 11.0 -- 10.5 ......................................... ---------- ----------------- I---................ 10.0 ---------- k"-------------- ----------------- -::::::::::::::::: 9.5 ---------- ---------------- ----------------- ----------------- L................. 9.0 ---------- ----------------- ----------------- -- ----.....---.. . ----------------- S-.---------------- 8.5 ----------- ------------------ ------------------ arm
'1 4
J 1 mai*imammmm*tl*ll*
---------- ----------------- ----------------- S....... . ........ ..
8 .0 ---------------------.. . .. .. . . .. . . . . .-
---------------- ----------------- ----------------- ::::::::::::::::::1 7.5 - .---- ----.-..;-.-:- ------------. . .. .. -----------------
6 .5 --- ------ ------------- ------ --- -----. -... .. 6.0 ------------ - -- ----- 5.5 ---- --------. ---
----------------- ------------------ ------------------ S.....
5 .0 ....... .....
.0 ---- ---- --- --...---
----r-... . ..-- --
................ -------------- ------------------------.-------------.... I
......-------------- Downhill 7..'.
Side
---------.... ---................---............. 4 --.....
- , --. ,- . -,- -- S........ .,.. ...... .. .. . , , ,,. :- *
- - - - - - - - - k" , ,
150 200 , . 250
,_________..:*,,**. .5 .4:' ,10 300, , :
-2 -.---==.3 -4
-6 -7 -8
--- 9 -10 -11 - - -12
-- 13 - 14 -15 16 Noz. .End b4f'~~41 "='""~"~Uphill / Downhill demarcation 9:34 AM9123/02 Nozzle 43 Chart I Pa1ge 22of_
Page of 2
P ýAIV FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-1S1-100-09 I o PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 1.
*Reactor Head Penetration FMAM*TOME AMoP Ultrasonic Examination Data Sheet Customer: M _. Plant: Fv/ B&--,,tA Unit:
Penetration No.: 9Z. Procedure: ,00-/"-
/O- -of Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan I l *-z7o 3 A0o3i7 16 Channel P/R II1 ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX"" Data Analysis Software: Version a-.5- ,.g Cable Length: 5 01 Type: 12.(-,-U'A # Intermediate Connectors: Calibration Block: d//,I3rE/ Calibration Setup: Scan File No.: 2,* .g 2 7.$ Initial Calibration File:1Z2-.62 1.. 29.3o Final Calibration File: I"z-zt4 s".i.r, 37 Scan Start: Z .L47" Scan Start:0= -<- Scan Stop: Z= ji.c ' Scan Stop:0=y74r. Index Increment: 3° Chanrnel Angle Serial No. Comments 6 35oqq Z 3o*I* 3,fZoZ o* 3 (.,,os 350*0o 5" f 005 3S052.z Results: o"ecordable Indicationss Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: Analyzedb :Leve 1: -27: Date: 49- :2 2-0 Reviewed by: -Level: Date: ' ~~
-/ TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
d A. FR A".A-ntATO AV*JP
- --.---...- '*****n**-*s.*s.I5 I..'L4Ll JIIL C..... ... .A ti.tr~c~n i"*r.; F--*
Customer: Nuclear Management Corporation . . Plant: Point Beach I l Unit: 1 Qk,,l W%;f¢ Nozzle: -44 Procedure: 54-ISI-100-09 INozzle Dimensions: (ia.) ID: 2.750 CD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 263 End of Noz. (in.): 3.58 Probe Serial No.'s: Ch i 35044 Ch 6 35052 Axial Scar'v t, Start: deg:@I., . . . Stop:, ideg @ j. Setup:i"
- . Ch2 35202 Ch7 nla iFiles" "'-. . -' Ch3 35070 Ch8 n/a Circ. Scan Start: 0.47 deg @1[-5-" Stop: 19 Ideg @1 3651' Setup:[ 1 Ch4 35044 Ch9 n/a Files: A2265_21.37.31 Cal Block SIN: 60119300 - Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-1 NRI -3 -4 -6
-7 8 9 10 11 12 13 14 15 17 Data Loc. 263 293 323 353 23 53 83 113 143 173 203 233 263 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 3.58 Inches MAX. 6 56 6.74 7.14 7.59 8.30 8 30 8.30 8 17 7.90 7.55 MIN. 7.14 6.78 6 56 . Inches 4.78 500 531 5.72 696 6.92 687 6.95 6.14 560 5.18 Comments: Measured Thickness: 500 4.78 Inches 063 1@ theta of 93 deg with an axial position of 9.15 Limited Scan? (YIN): N Analyzed by:-K, Date: 2-2'Z- 0-2 Analyzed by: Date: 9123/029:32 AM Nozzle 44 Pag 1 of 2 Pagel1 of 2
- t,'.
,a-,.
.4,...
Nozzle 44 Profile - FIRAMATOME ANP a a -.
"'-a 15.0 0 I I I - I 14.5
_: -------------- 1................. 14.0 .................. ----------------- ----------------- . i i 13.5
----------------- ----------------- ----------------- S........ - ----- ;. ..
13.0
------------- i .. .---............
----------------- ----------------- ----------------- --............ ---.... upSl:[do 12.5 12.0 11.5 11.0 ---------------- ---------------- ----------------- ----------------- I........ .........
10.5 ----------------- ---------------- .................
-i ----------------- ----------------- -----------------
10.0 ----------------- 9.5 ----------------- I -------------- 9.0 ----------------- ---------------- ----------------- ----------------- ----------------- 8.5 ----------------- ---------------- ----------------- ------------------ ----------------- 8.0 ------------------ ----------------
ý;
----------------- ----------------- I 7.5 7.0 6.5
~
.t~hithIhfliiWf lMISIU~IfVIMAA WIt~h kf~lzMuhkwk Sh7 khý hfIýtar h~t~h4*i~7I1I~t1~iuu
- - - - -bh-
- -n--n-h- -
6.0 ----------------- 5.5 ----------------- - --...-----------. 1................ 5.0 4.5 ----------------- 4.0 ------------------ L:Z: ------------- 3.5 i ]* ' .............. ... a............ 3.0
. ...... ---- .......--- ------..............--- ...............--- ...........---.---.....--.---...----. Downhill 2.5 -----------------------------------------------------------------------------
2.0 ------------------------------------------------------------------------ Side
. -. .-. -. 7t
. ----- . . . .. . . . . ..- . . . . . . ..-. . . . . . . ..- . . . . . ..-- --. . . . . . . ..- L . . . .L. . -: " ,*.
1.5 ~~~~~~~~-------------------- -------------------------------------------------------- 1.0 0.5
- t -
- .. .. ,-., L..:
.. . .. .. . t.................
.. . I- ........- -- -....
* -a -
.a? 'tt
"'1 4%tat.,
7 ; rŽ( 0.0
- 0. '. - 100., 150 200 250 300, 350 , " , , .
-2 a.a-a..3 -4
"-5 -6 7 8
- 9 -10 ----- 11 --- 12
- 13 -- 14 - 15 --..- 16 I
- Noz. End .......... 1 -="-au Uphill / Downhill demarcation 9:32 AM9/23/02 Nozzle 44 Chart 1 @9k09-/. - Page 2 of 2 1%
P 014ThAýV 7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration FRANIAr=_E AMP Ultrasonic Examination Data Sheet Customer: M/c. Plant: Pzl. ',e., Unit: Penetration No.: $"- Procedure: " Equipment: Description VH# Cal. Due Date SN# gTomoscan , f-7 o 33I7.
/Z 16 Channel P/R I/A ACCUSONEX" Data Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version-3.. ..*.0 MY Cable Length: 5O1 Type: IZG.,- t # Intermediate Connectors: I Calibration Block: 1,0/113DO/ Calibration Setup:
ccan File No.: v.'~.. 6 f-
/47. Initial Calibration File: v , - /.O. 2.36 Final Calibration File: A.z.L;-ox'.i . .77 Scan Start: Z '/q7 Scan Start:' = -.X Scan Stop: Z = 17.o Scan Stop: e= 7-c.s-'
Index Increment: 30 Channel Ang1e Serial No. Comments
/ 60 .35Fo/
.30
(,,"fs -"5*zoz OD 3 4 's -35*0 O Results: ti Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments: ,Analyzed y: .'-.-- . .--- Level: Date:.9" Reviewed by: Level: Date: /o--O/ TYPICAL DATA'SHEET FIGURE 5 (ý914L+' Fage 31 of 32
A A C-ustomer: Nuclear Management Corporation
,- .=.*. *uoumt
!Plant: Point Beach
~AI,-^llll1tUII UI[dII TU-nit:
oi*i~ee Nozzle: 45 Procedure: 54-ISI-100-09 JNozzle Dimensions: (Rh.) ID: 2.750 OD: 4,000 'Thickness: 0.625 Downhill Side of Nozzle (deg.): 285 'End of Noz. (in.): 3.6 Ch 1 35044 ' Ch 6 -35052
*;xa Scan', Start"-+*:" deg';,.-:" ýtop'o' =".-;.' setupI "-i'* Ch2 35202 Ch7 n/a
. * .. .. .. ,,*- Ch3 35070 Ch8 n/a Circ. Scan Start: -5deg 1 0Stop:.
73 I dog @9 S 1 Ch4 35044 Ch9 n/a Files: A2265_20.16.54 Cal Block SIN: Depth EdPitI 60119300 Ch 5 35052 Ch 10n/a EdPoint 2 Axa dutdCr. Extent Flaw Flaw Flaw Fla Weld Location Flaw Surface to Mi Mi Max Max Total Mi Max Total Length Angle TWO Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Mn Max 7--'5 9 T 13 1 T 16_ _ _ __ _ _ _ _ _ _ - _ __ _ _ _ _ _ 12 - - - - _ _-. 13
`14 15 16 17 Data Loc. 285 315 345 15 45 75 105 135 165 195 225 255 285 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 PROFILE 300 330 360 Noz. End 3.60 3.60 3.60 3.60 3.60 3.60 3.60 3.60 360 3.60 3.60 3.60 MAX. 647 665 688 8.09 8.06 821 3.60 Inches 8.15 809 7.83 7.44 7.00 662 6.47 Inches
.MIN. 4 87 T4.87 5.14 665 6.71 6.79 6.91 6.76 6.29 5.73 5.26 4.99 4.87 Inches Comments: Measured Thickness 063 thetaof 135 deg with anaxial position of 11.21 LImited Scan? (Y/N): N Analyzed by: Date: ---vo9 . 0 IL. Analyzed by: Date:
9/23/029'32 AM 9I2IO2~32AMNozzle 45 914iAV- Page 1 of 2
.... J Ji
-- .. -'-A NaP Nozzle 45 Profile
, " FRAMATOMR ANP 4 ,- .
a . - A 15.0' 14.5 -- ------------ -------- ----------------- ----------------- ----------------- ------------------ ------------------- 14.0 -- ------- --- ------ - -- ----------------- ----------------- ----------------- ----------------- --------------- i--- 13.5 ------------------- ..------------- ... ----------------- ----------------- ----------------- ----------------- 13 .0 ...... - --I - ---------------- ----------------- ----------------- ----------------- ----------------- ----------------- 12 .5 . .. . . . . . . . . .. . .. . ... . . . .. . . . .. . . .. .. ----------------- ----------------- ----------------- ----------------- ----------------- 12.0 ------------------.. 11.5 .. . . . . . . . .. . . . . . . . ----------------- 1 1.0 - ..---------------- ..------------- ..------------------ ------------------ ------------------ ------------------ ----------------- ...... 10 .5 ---------- -- ------ . .. . . . . .. . . ...- I -- .5-
~~~~~
-- 1--- -- 1--
.U --...............-................... ---------------- ----------------- -----------------
8.5 ----------------- ---------------- ------------------ ------------------ 8.0 ---- 7.5 t---------- t...-*-----'--------, *----------*--------....... ------------ ...... 7.0 ---------------- ---------------- ---------------- ------- ----- ---------------- ----------------- 6.5 1-"' ----------- "777 ------------ ------------------- ---------------- 6.0 ----------------- -------- ------ ---------------- ---------------- ---------------- ------------ ----------------- 5.5 ----------------- ------ --------- ---------------- ---------------- ---------------- ----------------- 5.0 --------------- ----------- ---------------- ---------------- ---------------- ----------------------- ----------------- ----------------- 4.5 ----------------- ---------------- ---------------- ----------------- ---------------- ------------------ ----------------- 4.0 ------------------ ----------------- ----------------- ----------------- 3.5 .......... + .........-......----... ----------------- 3.0 ---------------- ---------------- ----------------- ----------------- ------- - 2.5 ---------------- 7- Downhill
---------------- ----------------- ----------------- ----------------- ----------------- II ý 1ý Side 2.0 -.--. --- ----- ... ...
1.5 ------------------------- ---------- ---------------- 1.0 - --------- . . . . .[----- --- -- -------------- ------------- 0 .5 - .......---I .......-- ------ ----------- ------------------ --- - - -- - - - 0.0 ---------- ------------------ ------ 100 150 , 200 , 250 ',; 00", , ,: . 350"* '"';J " ;*
--- 10 - - 11 ---. 12
. .. 14 -15 ..... 16
- ! -'"I-
--- -N z. End ='===Uphill /Downhill demarcation 1
9:32 AM9/23/02 Page 2 of 2 Nozzle 45 Chart I1 ) ],.,l.
FRAMATOM-.ANp NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations SPRCEDRE O.:54-S- 00 PROCEDURE NO.: 54-0-100-0I Reactor Head Penetration F*Al=-M.E AM*.P Ultrasonic Examination Data Sheet Customer: Nnrc Plant: ,CPo/,. BeqA Unit: I Penetration No.: Procedure: 6"q-27-A/00- Of Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -i I-f 2 /z-7o - Ao3i 7 16 Channel P/R N-1i .WIA N/1 ACCUSONEX` Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version.3-" -1.S Cable Length: 5o0 Type: Rc.,- 1-,4 # Intermediate Connectors: I Calibration Block:.&o//,.3vEI. Calibration Setup: S'can File No.: Initial Calibration File: ,2.2"2.,,._/o.28.3 A.1'&Z.,£".... iO..o5",9. *Final Calibration File: , I*.3, Scan Start: Z = o.v-1 Scan Start: 0 = -5 Scan Stop: Z = /MO Scan Stop: 0 = 3,, t .Index Increment: 30 S Channeil Angle Serial No. Comments 3 &.O"s -35ojO 6,~ os ~ 36
*o2 5 Results: irbje Idicatýions Leak Path Detected Axial Flaws Detected Circumferential Flaws Detected Comments:
Analyzed b: Level: / Date: Reviewed by: - Level: "7 Date: /O/,/0 -L_ 1 TYPICAL DATA SHEET A4-3 O-04 1 FIGURE 5 Page 31 of 32
A( FRAMATOY'E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 46 Procedure: 54-ISI-100-09 Nozzle Dimensions: (Inb) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg-): 308 End of Noz. (in.): 3.67 Probe Serial No.'s: Ch i 35044 Ch 6 35052 -xlal Scan',-Ji :Q- 5tart:ld- - : .'1 StoP'l, __d_,;.etup;0 -.,' $.-, Ch2 35202 Ch7 n/a Filesi: ~~~~~~~~~~~~~~........
....*................. ,......................- dg:~
-, :-,-*..... =.....** h3500 h nl S.......
Circ. Scan Start:[ -5deg @ 0.47 o Stop:I 365 Ideg @I" Setup:1 1 h335070 Ch3 Ch4 35044 ChB Ch9 n/a n/a Files: A226517.05.27 Cal Block SIN: 60119300 - Ch 5 35052 Ch 10 n/a Depth End Point 1 End Point 2 Axial Adiusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (ID/OD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max 1 NRI 2
-3 4
5 6
-7 8 __
9 10 12 13 14 15 16 17 Data Loc. 308 338 8 38 68 98 128 158 188 218 248 278 308 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 3.67 Inches MAX. 653 661 800 7.87 8.00 8.10 8.00 7 94 7 66 7.25 7.00 6.77 6 53 Inches MIN. 5.12 520 677 669 692 7.00 6.95 669 639 5.87 5.47 5.22 5.12 Inches Comments: Measured Thickness: 062 @ theta of 1 deg with an axial position of 549 Limited Scan? (Y/N): n Analyzed by: Date: /7 /7-- Analyzed by: ri 7A Date: 9/22/026-59 PM Nozzle 46 Page 1 of 2
Zo 10Z I PNOL19V91"IZZON ZOIZZI6V'd 69:9 U0ileolewep ijjqumocjI / 11qdnmmnn~umos PU370ZON. 9 6-ir- 9
.4 44- .
.4 4. 4' 4- -.4 44.4 2.
seaoe 4,
*>. .4 4 4 4Q9 OOL 44/444.4
+ + .1.
4'--------
------------------- ------------------ ------------------ .............. - - 90 4 ---.44
- 4. 4 4 -- -- --
" O .4 .4 4~4 11444
--- ------ -------- -------------------I ------------------- -----------------
---------- *------- ------------ -------------------- -------------- ----- --------w---------- -----------------
nin ---------------
-,=, -----ý - ;;;;;:------ w----- --------
- ------------- =r (D
.a.ý- - -
a
--------- ----- -l
------------------- -------V--
4 -- ' - --- 44 - -- 44 4 4 4 444444.44, 4 . 4-- 444444------------
- 44. 4. *.4 -- ----
7 7 ----------
-- -- - , 4. --' 44-
----------- I.......
I ------------------- ........: ---------- ----------------
-------------- ------------------- I------------------- -------------------- -----------------
444 .44;444 4.4, . 4... 4*4 4-44
.4" .4-4 44.444,44 4
- 4 I
-4 I ________ j ________ I ________
-4 'U (44 44444 ' >',, .44 44-. *4-1.
*4,4.441;4.-4 4
4 (,* 4 4 4 4 ~ '.'4 NV
'89IO~d 9V OIZZON 4 . 4 ("'4' 444 4/ 4 -- 4 0
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I PROCEDURE NO.: 54-4Si.100-09 f PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
.A Reactor Head Penetration PJP.AMMMC AMP Ultrasonic Examination Data Sheet Customer: "Mnc Plant: h,,,# e,,. ,tA Unit:
Penetration No.: 7 Procedure: 6"q-o$/-1-/ Equipment: Description VH# Cal. Due Date SN# 4Tomoscan -/z.7o o3i " 16 Channel P/R / 1A/ ACCUSONEX' Data Acquisition Software: Version 6.2.5 ACCUSONEX'm Data Analysis Software: Version,3-" 3.. Cable Length: 50'1 Type: R.-I"-* # Intermedibte Connectors: I Calibration Block: e o/I 3zvE/ Calibration Setup:
"Scan File No.: A le'-.o7.
0 Initial Calibration File: AssLt,2-jo.Z S.3o Final Calibration File: ,7vzc-..r.19. Scan Start: Z = 0, q:7" Scan Start: e = -5 Scan Stop: Z = "2.4 Scan Stop: 0 =4r Index Increment: 30
-Channel Angle Serial No. Comments 1 6' 35'oWq 3 /- 3-51D "S5zo *s
. 0'CI -35o0?
q~ ~ s~.Z* o q,ý "ro b Os 36oq2.. Results: o Recordable Indications> Leak Path Detected / Axial Flaws Detected Circumferential Flaws Dftected Comments: Analyzed I*y: - Level: Date: '/ Reviewed by: , ,. Level: Date: 16121 TYPICAL DATA SHEET FIGURE 5 Page 31 of 32
Ac CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 47 Procedure: 54-ISI-100-09 INozzle Dimensions: (Ia.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 315 End of NozL (in.): 3.68 Probe Serial No.'s: Ch 1 35044 Ch' 35052 AxIal Scan* Sta!t:I d "- "',0,stor:.l--. Ide l -4"Sl'_;_ Ch2 35202 Ch7 n/a ________________________i.._____________________ Ch3 35070 Ch8 n/a Circ. Scan Start:1 -51deg @1 047_" Stop:I 365 Ideg @1 18861' Setup: I Ch4 35044 Ch9 n/a Files: 5-~kMTM______ A2265_16.07.34 _______ Nozzle_ Cal Ultrasoni Block_ SIN: Examiatio 60119300Data___ Sheet_ Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation MIn Max 2 3 4 6 7
-8 9
10 11 12 13 14 15 16 17 Data Loc. 315 _____ 6~~~~~~~~~~~~0 345 15 2______ 45 1____ 75 _____ 105 ___ 135 165 195 225 255 285 315 Degrees WELD Noz. Loc. 0 30 60 90 120 150S 180 210 240 270 300 330 360 Deglrees PROFILE Noz, End 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 3.68 Inches MAX. 6.77 6.90 8.17 8,10 8 24 8.33 18 33 8 17 7.83 7.45 7.11 16.88 6.77 jInches MIN. 532 541 688 695 7.11 7.31 17.31 7.04 665 608 561 15.39 5 32= inches Comments: Measured Thlckness:l 0 63 @ theta of 1deglwith an axal position of 9 84 Limited Scan? (YIN): n I Analyzed by: / . Date: q'/717O. Analyzed by: vi/1A Date: 9/22/026 20 PM Nozzle 47 page 1 of 2
1 t t *:-"4' ' 4 Nozzle 47 Profile ' ' * . 5'$
, ,FRAMATOME AN1P ' +C"+ ' 4 *,,. *+f
'41 14.5 " '- ---'7 ------------- --................ ..
i 14.0 - I-
---- ------------------ I-----............... ------... . .......-
13.5 ....-- . .
--.................... +-.....---------------
13.0 - ..-------------------------------------- -... -------------- S................. -------- -----.. --- ---.
- o. ------------------
S.... . ......... -77". 1 2.5 - ..--------------- ..- ------------------- ----------------- ------------------ 12.0 11.5 ............-
------- 7
------------- 2---- ------------------
11.0 -------------------- ------------------- --- -------------- - 10.5 - ............ ------------------- -... -------------- S................... ------------------ 10.0---------------------------------- -------------- --------- ------------------ ------------------- 9.5 ----------------- ------------------ -------------- ------------ A ----- ------------------ ------------------- 9.0 ----------------------------------------- 8 .5 ....................----..................- -...
,, 8.0 ---------
8.5 --------------------- --------------------
-I t"S 7.0 7 ------ ...
........... .. I 4 UiuiflflIbbhamImhn 4! nrnu n1,hnnunummu I
------- 77:7:777-7 6.5 --------------------- -- .. --. ..- .-- .. ---
6.0 5.5
------------- I------
5.0 --- -- - -- - - - ------------------- . . .. . . t.----.. . --------------- 4.5 ---------------------. -.----------------- .-.---------------
------------------- ----------....----.- I------- ---------- -------------------
4.0 --------------------- -------------------- --... --------------- -------------------- ----------..-.-.---- ---------. --------- 3 .5 ------ ------------- 3 .0 --------------------- -------------------. -... - -............... --.-.-.-.-.-..-.-.-.-.- 2.5 .... 7. --
-- - - ------------------- ----. . .... - - - - ------- --- Downhill 2.0 . -----
. ------------------ :--. .---.. .- .- .---- . -------- -------------------- ----------- ------------- Side-1.5 j ...................------- ................
1.0 .. ..-------.. .
-- -- -- r"-- ----------------..----
0.5 .. .. ----.-. .- L ---------..- ..-- -_ . 0.0 ' .. . . .. ... . . ... . .. - *.- 4 150 . 200. 250 ". " '.300 , 3 50 r , 01 ',0' 50. ,+, . . + +, -. +,, , ' ,,-, F "+. A+ Degrees , , ,+ ,,* ' , .- . - .., .* ; " '.+
-- 5 -2 - 3 -- 4
-6 7 -- 8
-9 -- 10 -- 11 ---- 12
-- 13 14 ,15 16
--- Noz. End --.,--1 "On "Uphill I Downhill demarcation 6:20 PM9/22/02 Nozzle 47 Chart 1 Page 2 of 2
P o1/AAIV7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations I. PROCEDURE NO.: 54-1SI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5
*A* Reactor Head Penetration FM* OE AtNp Ultrasonic Examination Data Sheet Customer: AjM Plant: Bo,,,, 1' Unit: I Penetration No.: Procedure: 5q",'-/-2--/D '-Of 0 Equipment:
Description VH# Cal. Due Date SN# 4Tomoscan 7iL17- 7 o ;Z0o3i7 16 Channel PIR 1U/A ACCUSONEX*M Data Acquisition Software: Version e.2.5 ACCUSONEX' Data Analysis Software: Version 3.8 0) Cable Length: 501 Type: R6,- 1-.+ # Intermediate Connectors: Calibration Block: &-o//,93DE/ Calibration Setup:
'Scan File No.: , -/. *3-'Z.- Initial Calibration File: _
Final Calibration File: A.2 - S'.
' /03 Scan Start: Z q7"' Scan Start: 0=. V Scan Stop: Z= 12. 7 Scan Stop: e= Ys-Index Increment: 30 Channeg Angle Serial No. Comments S 6° -55o~qq 60 -350-f 3 - &0"s "55*Zo
,.i q4S-z6" -S o -r*o F=Jb 5" &_e56 3 6OFz Resultsid ýNoRecordable Indications* -LeakPath Detected t7oa_ Flaws Detected! Circumferential Flaws Detected Comments: tjgr%
A nalyzedl~:./.,.*/IL; Level: -2r_ Date: 9--21-o'-z-LReviewed by: /"Level: Date: /-* z TYPICAL DATA'SHEET FIGURE 5 Page 31 of 32
A FPA.-ATOM*" ANt=r CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Cor oration Plant: Point Beach Unit: 1 ' Nozzle: 48 Procedure: 54-ISI-100-09 INozzle Dimensions: (il) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg): 47 End of Noz. (In.): 1.29 Probe Serial No.'s: Ch i 35044 Ch 6 35052
,XIdl Schn'04,1,
,~~ l,ýJ1.P.@ stop: T,-,-, .";" e g @1 S t o p:,,I *&,.I Ch2 3,52'2 35202 Ch7 n/a
~Ies~ ~ ,~.~ . ~t~Ch3 35070 Ch8 n/a Circ. Scan Start:I 0.47jdeg @[_-5 " Stop:I 12.71 Ideg @1 3651" Stop: Ch4 35044 Ch9 n/a Files: A2265_01.31.25 Cal Block SIN: 60119300 Ch 5 35052 Ch 10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (In.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max I NRI ,
-3 4 5 6 8
-9 10 11 12 13 14 15 16 17 Data Loc. 47 77 107 137 167 197 227 257 287 317 347 17 47 Degrees 60 90 120 150 180 210 20 270 300 330 360 Degrees WELD Noz. Loc. 0 30 1.29 1.29 1.29 1.2 1.29 1.29 1.2 1.29 1.29 1.29 1.29 Inches PROFILE Noz. End 1.29 1.29 MAX. 4 09 14.41 14.70 1 5.19 5 5B8 - 5 82 5 95 5 93 5.58 5 21 4.72 4.54 4 09 Inches MIN. 3.19 1 3.31 13 60 4 03 4 46 14.76 4 97d 4 82 4.46 4.09 3.64 13.27 3.19 Inches Comments: Mleasured Thickness: 0.64- 75 -thetaof 2541 de6l with an axial position of 9.56, Limited Scan? (YINF: N 1Analyzed by: , ... *: , _DateF73 -I *a " Analyzed by: 37//A Date:
9/22/028:59 AM Nozzle 48 Page I of 2 ag 1 of 2
AMT". Nozzle 48 Profile ""1 FRAMATOME ANP 15.0-. r a r T a -- - - . ,
--- .--- , ,I-14.5 14.0 S.. . _- ... . . 2 '., 2 .. a"
. *-. ":*2..
. 2.It ' ""** '""
13.5 -------------------- 13.0 St... 4 ------------------- 4 7 ---- i--- - ---------------.. ----- ----- --- -Uphilll--; S...._.._............... Up il,., 12.5 12.0 4.................... 11.5 11.0 r................... _: ----------------
------------------ 4.................... -------------------
[][))--[-]-----]--- 10.5 10.0 t................... 9.5 9.0 [------------------- ................... n-................... 8.5 8.0 S7nA 7.5 6.5 -..----..------------... 6.0 --- - -- - - --- - 5.5 ------------------------ ------------------- ------------------- 5.0 4.5 4.0 3.5 3.0 2.5 Downhill 2.0 ......... ...... ..... ,.... ..... ........ . ...----- ...... ....... ........ ....... . ....... ....... ........-------.......-...-.-.......--... _.---"--....--.- 7 . Side 1.5 1.0 0.5 Ant 0 . 50 100 150 200 '250 300" 2 350 "
' t Degrees 4 ;.- " - ."'A 4k"J 4
'-41"
- 2 - 4 I"'
Th 4
*-5 -6 7 -8 4
-- 13101 -1
""-13 - 14 -15 "'4'"
' Noz. End ........ 1 m"-'"='Uphill I Downhill demarcation 8:59 AM9/22/02 Nozzle 48 Chart 1 (Page/rof Page 2 of 2
I4,W$7A,ýI7 FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE Remote Ultrasonic Examination Of Reactor Head Penetrations j PROCEDURE NO.: 54-ISI-100-09 PQ NO.: PQ-100-1, 54-PQ-100-2, 3, 4 and 5 Reactor Head Penetration FY4M.A=0tMZAP Ultrasonic Examination Data Sheet Customer: NM'c Plant: ,,, 8,.., Unit: I Penetration No.: Yq Procedure: "-qjs/--/s90O9 Equipment: Description VH# Cal. Due Date SN# gTomoscan i -/L7.3 A0314 16 Channel P/R ACCUSONEXI MData Acquisition Software: Version 6.2.5 ACCUSONEX' Data Analysis Software: Version 3.8"w Cable Length: 65'0 Type: P- 1-'M # Intermediate Connectors: I Calibration Block: "6o// 3DC/ Calibration Setup: Scan File No.: ,4.2.-99-_ C : . -' Initial Calibration File: ,* z2 - . Final Calibration File: o- .I?.J7 Scan Start: Z= ,7 "'Scan Start:,0= 0 Scan Stop: Z = -z.?7,'can Stop: 0= 3'C" Index Increment: 30 Channel Angle Serial No. Comments 1 60 . 35o/qq
?-- o IO'
/_ 13 5"_o 1"-_o_D _-
3 &0,,0- "3-So Results: *No Recordable Indicatio-n Leak Path Detected 11 Axial Flaws Detected Circumferential Flaws Detected Comments: ii KT. Analyzed by: .. Level: _ Date: - /-: "2.. Reviewed by: LLevel: Date: /J-1Z- I
- oTYPICAL DATA SHEET FIGURE 5 I $ Jro, Page 31 of 32
A
=R A M.LTOMI,1E ANP CRDM Nozzle Ultrasonic Examination Data Sheet Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1 Nozzle: 49 Procedure: 54-ISI-100-09 INozzle Dimensions: (li.) ID: 2.750 OD: 4.000 Thickness: 0.625 Downhill Side of Nozzle (deg.): 52 End of Noz. (in.): 0.94 Probe Serial No.'s: Ch i 35044 Ch 6 35052 t Ž,. I"-Stop:
deg 'e. Stop: Ch2 35202 Ch7 - n/a
,.~.~', -. ,,i , .. , .Ch3 35070 ChB n/a Circ. Scan Start:_ -Jdeg @1 0.47 I" Stop:' 365 Ideg @1 12"711" Stop: Ch4 35044 Chg n/a Files: A, . _*___-_o.o.-.7. Cal Block SIN: 60119300 Ch5 35052 Chl0 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDIOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (In.) (In.) (deg.) (in.) Ratio Orientation Min Max I NRI "'__
23 ,_ 4 5 6 9 10
-11 12 13 14 is 16 Data Loc. 52 82 1112 142 172 202 232 262 1292 322 352 22 52 Degrees WELD Noz. Loc. 0 30 ' 60 90 120 150 180 210 240 270 300 330 360 Deglrees PROFILE Noz. End 0.94 0.94 0.94 0.94 0.94 10.94 0.94 0.94 0.94 0.S,4 0.94 0.94 0.94 Inches MAX. 3.92 4.07 4.46 4.76 5.13 5 56 5 62 5 49 5.17 4.70 4 53 4.07 3 92 lInches MIN. 2.66 2...276 3 05 3 58 3 88 4.39 4,47 4.29 3 88 3 53 3 04 2.70 2.66 lInches Comments: Measured Thickness: 0 64
- ht f 2131 dealwith an axial position of 6.2 Limited Scan? (YIN): _ N I i Analyzed by: fJA...**/,__Date: t?-.A; t- Analyzed by: 13* Date:
9/22/029:03 AM Nozzle49 ' Page 1 of 2 N
) k...
A FRAMATO0MANP Nozzle 49 Profile i!- 2 15.0 14.5 ------------------- 14.0 .................... S................... -................... 13.5 ................... .................... 13.0 ------------------
,=....................,
12.5 S................... ------------------ *................... ------------------ 7. 12.0' .................... ............... I... ------------------- 11.5 .................... ................... 11.0 ................... S.................... 10.5 ......... *........... ------------------ ------------------- . . . .. ........... r 10.0 ------------------- ------------------- 9.5 -..... . .... ... . .. ...
,i....................
9.0
.J.. ...... .......... 4....................
------------------- S.....................
8.5 -... . . . . . . . . . . . . . . . . ------------------ ,-. . . .. ... . . . .. . . . .. 4........... A......... ------------------- 8.0 ................... .................... 0) 7.5 ------------------ .................... 7.0 ------------------- 6.5 ------------------
*t....................
6.0 ................... -------------------- 5.5 ------------------ 5.0 ------------------- 4.5 S.. ............ .. .. . .. . . . . . .. --.. . . .. . . . . . . .. .Mu. . .. MO . .. . 4.0 3.5 . . .. .. .. .. .. .. .. .. .. .. ..~~~~~~~- .. .. . . . 3.0 S... . . . ... . ... . . . . .. . . . . .. . . .. .. . . .. .. . . . . ..--. 2.5 --- ---- i--- ---- ----------------------------------------- Downhill 2.0 l--- --- ---.-- --- .--- --- --- --. - -. - ---------- ---. I.--- ---.--- ------ ------- --- --- ---- --- -----. Side 1.5 -------- ------------- ---------- ---------- ---------------------------------- --
'L ;
1.0 0.5 0.0 0 50O 100 150 200 250 30'0, 350 . Degrees '
-2 -- 3 -4
-5 -6 7
--- 13 -10 --....l 12 14 _ _ 15
..-- "u-n'"UphillI Downh fill demarcation *:
Noz. End 1 9:03 AM9/22/02 Nozzle 49 Chart 1 7 . Page 2 of 2
FRAMATOME-ANP NONDESTRUCTIVE EXAMINATION PROCEDURE I Remote Ultrasonic Examination hI Of Reactor Vessel Head Vent Line Penetrations 1 PROCEDURE NO.: 54-ISI-137"00 I___ PQ NO.: 54-PQ-137-Gi A RPV Vent Line'Vent line Data Sheet Customer: /Y/nt C Plant: Pojg/ 8e, Unit: Vent line No.: /, Procedure: 5'-q-/1/-137 - o Axial Scan Setup: , Scan Start: Z = -1. ;z Axial Scan File No.: A -ZL(, . Scan Stop: Z = .5.____ Channel Angle Serial No. 1- :O°L q-Z(,,,- OZo03 2 700S z-c.- v oZ0oo3 4 - 9;T 14,-ooo03
'_5
___- Ioloo3 Performedlby: Date: Analyzed by: , ,e-- Date: Results: o
-F-Iaws Detected Axial Flaws Detected Circ. Flaws Detected Comments: Z,*ee.'..reA. ,. .,,o /
It ... Figure 1 Ne Page 14 of 15
A CRDM Nn77In IIItrnni,,
-- - - - - --.------ 5S**
Fv2min2finn flf ULcS Qk*CL E 1 Customer: Nuclear Management Corporation Plant: Point Beach Unit: 1. - Nozzle: Vent line Procedure: 54-ISI-137-00 with CIA FRA-02-012, PB-2-004INozzle Dimensions: (lit.) ID: 0.750 OD: 1.046 Thickness: 0.148 Downhill Side of Nozzle (deg.): 0 End of Noz. (In.): 0 Probe Serial No.'s: Chi1 9266-02003 Ch 6 n/a Axial Scab,;4 , .. Stt"l, .. Ideg : :o I .'-t6'--, -. Ide, . --'.-~Setup: ,', Ch2 9266-02003 Ch7 n/a Fi6; ~~: 6.r:V. I- Ch3 9266-02003 Ch8 n/a Circ. Scan Start: -51deg @ -1.7 " Stop: 365 Ideg @ [I j Setup:[ Ch4 9266-02003 Ch9 n/a Files: A226610.29.36, _11.00 52, _12.20 53 Cal Block SIN: 6012827D1 Ch5 9266-02003 Ch10 n/a Depth End Point I End Point 2 Axial Adjusted Circ. Extent Flaw Flaw Flaw Flaw Weld Location Flaw Surface to Min Min Max Max Total Min Max Total Length Angle TWD Aspect Flaw @ Flaw No. (IDlOD) Flaw Tip (in.) (deg.) (in.) (deg.) (in.) (deg.) (deg.) (in.) (in.) (deg.) (in.) Ratio Orientation Min Max
-2 3
4 5 6
-7 8 -9 10 12 "
13 14 T 16 _ 17 Data Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees WELD Noz. Loc. 0 30 60 90 120 150 180 210 240 270 300 330 360 Degrees PROFILE Noz. End 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Inches MAX. 1 00 1.00 1.00 1.00 1 00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Inches MIN. 000 0.00 000 000 000 000 0.00 0.00 000 000 0.00 000 0.00 Inches Comments: Measured Thickness: @ theta of deg with an axial position of Limited Scan? (YIN): n Analyzed by: Date: bt. Analyzed by: r'.I Date: If 61 9/231025 05 PMV Data Sheet -Vent Line Page I of 2
.1-.,
Vent'Llne Profile C., rFRAMATOWE ANF I.,
'-'Ii 15.0' --I II
'.4-
--- 7--------------- I -------------------
I 14.5:. ---------- I E I 14.0 - - . ....... ---------- ------------------ ------------------- ------------------- ------------------- 13.5 ---- ----- ---.-- ---------- ------------------ ------------------- ------------------- ------------------- -- ---------------- 13.0 ........ ---------- ------------------ ------------------- ------------------- ---------------- ----- 12.5 .. . . .. . . . . .. .. . . .. . . .. .... . . ---------- ---------------- ------------------- ------------------- ------------------- 12.0 ............................ ---------- ------------------ ------------------- ------------------- ------------------- ----------------- 1 1.5 - ..--------------- ..- ------- ---------- ------------------ ------------------- ------------------- ------------------- ---------------e-. 11.0 -.-- ....------------------- ---------- ------------------ ------------------- ------------------- ------------------- ---------------- 10.5 .. . . . . . . . . .. . . . .. . .. . .. .. . . . ------------------- ------------------- 10.0 -.- .......----------- ------- I.., ------------------ ------------------- 9.5 -.--- ...-------------------
ý\------- ------------------- -------------------
------------------ ----------- ý\__-___. ------------------ -------------------
9.0 -.--- ....------------------- ---------- ------------------ ------------------ ------------------- ------------------- ------------------- 8.5 -..-- ...------------------- ---------- ------------------ ------------------ ------------------- ------------------- ------------------- cl) 8 .0 -..---------------- .- ------- ---------- ------------------ ------------------ ------------------- ------------------- -------------- X 0 7.5 -.-- ......----------- ------- ---------- ------------------ ------------------ ------------------- ------------------- i ------------------- 7.0 -..-- ...------------------- _Ij -------- ------------------ ------------------ ------------------ ------------------- ------------------- 6.5 ................... -........ ---------- ------------------ ------------------ ------------------- ------------------- --------- : --------- 6.0 -..-- ....------------------- ........... ------------------ -------------- ---- ------------------ ------------------- I ------------------- 5.5 ---------------- ------- ---------- ------------------ -------------- ---- ------------------- ------------------- ------------------- 5.0 -.--- ....------------------- ---------- ------------------ 4.5 -.-- ...------------------- ---------- ------------------ ------------------- ------------------- ------------------- 4.0 -.--- ....------------------- ---------- ------------------ ------------------ ------------------- 3.5 -.- .....------------.------. ---------- ------------------
-----------III--II
-- .4----------- ---- -------------------- ------------------- -------------------
3.0 -------I.........------.----- ---------- ------------------ ------------------ ------------------- 2.5 ---------------- ---- -- ---------- I
------------------- -------------- ----- ------------------ ---------- I......... ---------- Dowhhill 2.0 ------- ----------- ---------- ........... I------ ------------------- ----------- Side 1.5 4 1.0 -:i.......S..
- ilNg*H**
mM l .... I "no flmuamote[ g
*k=* U*kli .............
ýMmsp wkrm 1"MUNKMIUM I
Jl.. .. . *--__J P.mmum PONM "MMOM I mumov I I:i 0.5 --- - - - - -- - - - -- -I---- --- --------- -- -- - - --- i 0.0 , - I q
- _________
I 0 .5 o, . i6b " 150 200 250.. 35 0I,,
,. 7
.3grees.,- . ' ; *' , ', - ,.-=;
-2 - 3 4
-5 - 6 -7 11 -8
,. - 9 -. 10 ----..... . 12
. ,13 14 15 16
--, Noz.End ""=="kIUphill / Downhill demarcation 5:05 PM9/23/02 Data Sheet -Vent Line Chart 1 Pg 2 of Page o2,f 2}}