ML083460648: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
 
(Created page by program invented by StriderTol)
Line 1: Line 1:
{{Adams
#REDIRECT [[2CAN120801, Arkansas Nuclear One, Unit 2 - License Amendment Request Supplemental Regarding Technical Specification Change to Add LCO 3.0.8 on the Inoperability of Snubbers and Relocate TS 3.7.8 to the Trm]]
| number = ML083460648
| issue date = 12/11/2008
| title = Arkansas Nuclear One, Unit 2 - License Amendment Request Supplemental Regarding Technical Specification Change to Add LCO 3.0.8 on the Inoperability of Snubbers and Relocate TS 3.7.8 to the Trm
| author name = Mitchell T G
| author affiliation = Entergy Operations, Inc
| addressee name =
| addressee affiliation = NRC/Document Control Desk, NRC/NRR
| docket = 05000368
| license number = NPF-006
| contact person =
| case reference number = 2CAN120801, TAC MD9483
| document type = Letter, Technical Specification, Bases Change
| page count = 10
| project = TAC:MD9483
| stage = Supplement
}}
 
=Text=
{{#Wiki_filter:2CAN120801  
 
December 11, 2008
 
U.S. Nuclear Regulatory Commission
 
Attn: Document Control Desk
 
Washington, DC  20555
 
==SUBJECT:==
License Amendment Request Supplemental Regarding Technical Specification Change to Add LCO 3.0.8 on
 
the Inoperability of Snubbers and Relocate TS 3.7.8 to the TRM
 
Arkansas Nuclear One, Unit 2  
 
Docket No. 50-368
 
License No. NFP-6
 
==REFERENCE:==
: 1. Entergy letter to NRC dated July 21, 2008, License Amendment Request Regarding Technical Specification Change to Add LCO 3.0.8  
 
on the Inoperability of Snubbers and Relocate TS 3.7.8 to the TRM, TAC No. MD9483 (2CAN070805)
 
==Dear Sir or Madam:==
 
In accordance with the provisions of 10 CFR 50.90, Entergy Operations, Inc. (Entergy)
 
submitted a request for an amendment (Reference 1) to the Technical Specifications (TS) for
 
Arkansas Nuclear One, Unit 2 (ANO-2).
 
The proposed amendment would modify TS r equirements for inoperable snubbers by adding a Limiting Condition for Operation (LCO) 3.0.8 and relocating the current TS 3.7.8, Shock
 
Suppressors (Snubbers), to the Technical Requirements Manual (TRM).
 
The NRC notified Entergy on November 24, 2008, that additional information was required
 
relating to station procedures and controls that would ensure the opposite train Emergency
 
Feedwater (EFW) system would be verified operabl e prior to removing snubbers from service on a given system. Entergy's response to the NRC's request for additional information (RAI)
 
is included in Attachment 1 of this submittal.
 
The additional information provided in Attachment 1 does not invalidate the original No
 
Significant Hazards Considerations of the original ANO-2 TS change request (Reference 1).
 
This letter contains no new commitments.
 
Entergy Operations, Inc.
1448 S.R. 333 Russellville, AR  72802
 
Tel  479-858-3110 Timothy G. Mitchell Vice President, Operations A rkansas Nuclear One
 
2CAN120801 Page 2 of 2
 
If you have any questions or require additional information, please contact Dale James at 479-858-4619.
 
I declare under penalty of perjury under the laws of the United States of America that I am
 
authorized by Entergy to make this request and that the foregoing is true and correct. 
 
Executed on December 11, 2008.
 
Sincerely, TGM/dbb
 
==Attachment:==
: 1. Response to Request for Additional Information Regarding Adoption of LCO 3.0.8 (Snubbers) 2. Revised Markup of Affected Technical Specification Bases Pages (Information Only)
 
cc: Mr. Elmo E. Collins Regional Administrator U. S. Nuclear Regulatory Commission Region IV 612 E. Lamar Blvd., Suite 400 Arlington, TX  76011-8064
 
NRC Senior Resident Inspector Arkansas Nuclear One P. O. Box 310
 
London, AR  72847
 
U. S. Nuclear Regulatory Commission
 
Attn: Mr. Alan B. Wang
 
MS O-7 D1
 
Washington, DC  20555-0001
 
Mr. Bernard R. Bevill
 
Director Division of Radiation 
 
Control and Emergency Management
 
Arkansas Department of Health & Human Services P.O. Box 1437 Slot H-30 Little Rock, AR 72203-1437
 
Attachment 1 To  2CAN120801 Response to Request for Additional Information Regarding Adoption of LCO 3.0.8 (Snubbers)    to 2CAN120801
 
Page 1 of 4
 
Response to Request for Additional Information Regarding Adoption of LCO 3.0.8 (Snubbers)
On July 21, 2008, Entergy Operations, Inc. (Entergy) submitted an amendment that would modify Arkansas Nuclear One, Unit 2 (ANO-2) Technical Specification (TS) requirements for inoperable snubbers by relocating current snubber requirements in TS 3.7.8 to the Technical
 
Requirements Manual (TRM) and adding Limiting Condition for Operation (LCO) 3.0.8 to the
 
TSs.
 
The NRC notified Entergy on November 24, 2008, that additional information was required
 
relating to station procedures and controls that would ensure the opposite train Emergency
 
Feedwater (EFW) system would be verified operabl e prior to removing snubbers from service on a given system. Entergy's response to the NRC's request for additional information (RAI) is
 
included below.
 
RAI  Consistent with the staff's approval and inherent in the implementation of TSTF-372
 
Revision 4, licensees interested in implementing LCO 3.0.8 must, as applicable, operate in
 
accordance with stipulations. Section 3.0, Regulatory Analysis, Subsection 3.2, Verification
 
and Commitments, discusses the two Conditions for application of TSTF-372 specified in the
 
model Safety Evaluation.
 
Condition 1
 
Appropriate plant procedures and administrativ e controls will be used to implement the following Tier 2 Restrictions. Tier 2 restrictions (Conditions) involve the identification of
 
potentially high-risk configurations that could exist if equipment in addition to that associated
 
with the change were to be taken out of service simultaneously, or other risk significant
 
operational factors such as concurrent equipment testing were also involved.
 
(a) At least one AFW train (including a minimum set of supporting equipment required for its successful operation) not associated with the inoperable snubber(s), must be available
 
when LCO 3.0.8a is used at PWR plants.
 
(b) At least one AFW train (including a minimum set of supporting equipment required for its successful operation) not associated with the inoperable snubber(s), or some alternative
 
means of core cooling (e.g., F&B, fire water system or "aggressive secondary cooldown"
 
using the steam generators) must be available when LCO 3.0.8b is used at PWR plants.
 
Regarding Condition 1.a Entergy wrote:
 
Condition 1(a) assumes the availability of one Emergency Feedwater (EFW) train during
 
application of LCO 3.0.8.a. The TSTF-372 and the model SE specify the application of
 
LCO 3.0.8.a is contingent on the assumption that the redundant train remains available. Even
 
though ANO-1 has a unique EFW system design, the plant TS LCO and ACTION statements
 
will ensure the system remains capable of performing its safety function with various
 
combinations of pumps and flow paths OPERABLE. Although the TS implementation process    to 2CAN120801
 
Page 2 of 4
 
at ANO-1 may include this restriction in other procedures or administrative processes upon approval of this amendment, Entergy does not believe further action is required to ensure
 
compliance with Condition 1(a) since the TS inherently prevents application of LCO 3.0.8.a
 
due to a snubber-related condition which could render the entire EFW system inoperable.
 
Regarding Condition 1.b, Entergy wrote:
 
Condition 1(b) requires either one EFW train or some alternative means of core cooling must
 
be available when one or more snubbers are inoperable that affect both trains of a given
 
system. As described in Condition 1(a) above, there are no instances where the EFW system or both trains of any system being relied upon as the only core cooling method would be
 
removed from service or any work permitting both at the same time during its associated
 
Modes of Applicability that require these systems. Again, such a plant configuration would
 
result in LCO 3.0.3 entry or plant shutdown, which prevents the utilization of the 12-hour
 
allowance of LCO 3.0.8.b. Although the TS implementation process at may include this
 
restriction in other procedure or administrat ive processes upon approval of this amendment.
Entergy believes the TS LCO and ACTION statements will ensure the system remains capable
 
of performing its safety function with no further action required to ensure compliance with
 
Condition 1 (b).
 
It is not clear to the staff what these statement s mean in terms of taking actions to implement Tier 2 restrictions. Conclusions made by the licensee that would result in exceptions to or
 
deviations from TSTF-372 model SE requirements to establish plant procedures and
 
administrative controls to implement Tier 2 Restrictions need to include an analysis basis for
 
the conclusion. The license application regulatory analysis needs to address this issue for
 
condition 1(a) and 1(b) conclusions.
 
REGULATORY ANALYSIS BASIS FOR RAI
 
Regulations
 
10 CFR 50.36(d)(2)(i),states:
 
Limiting conditions for operation. (i) Limiting conditions for operation are the lowest functional capability or performance levels of equipment required for safe operation of the facility. When
 
a limiting condition for operation of a nuclear reactor is not met, the licensee shall shut down
 
the reactor or follow any remedial action permitted by the technical specifications until the
 
condition can be met.
 
LCO 3.0.8 modifies TS requirements on the impact of inoperable snubbers. Under LCO 3.0.8
 
TS systems would remain operable when requir ed snubbers are not capable of providing their related support function. The licensee stated that the proposed amendment is consistent with
 
staff approved TSTF-372, Rev 4, "Addition of LCO 3.0.8, Inoperability of Snubbers." 
 
TSTF-372, Revision 4, documents a risk-informed analysis of the proposed TS change. The
 
risk assessment associated with the proposed delay times for entering the TS actions for the
 
supported equipment was performed following the three-tiered approach recommended in
 
RG 1.177 for evaluating proposed extensions in currently allowed CTs:    to 2CAN120801
 
Page 3 of 4
 
The second tier involves the identification of potentially high-risk configurations that could exist if equipment in addition to that associated with the change were to be taken out of service
 
simultaneously, or other risk-significant operational factors such as concurrent equipment
 
testing were also involved. The objective is to ensure that appropriate restrictions are in place
 
to avoid any potential high-risk configurations.
 
Entergy Response As discussed in the July 21, 2008, Entergy letter, adoption of LCO 3.0.8 requires the
 
availability of EFW (or other core cooling method in lower modes of operation) during periods
 
when one or more required snubbers are inoperable. While the TSs ensure an EFW train or
 
other core cooling method is operable in accordance with the related mode of applicability, the
 
TSs do not address which train (of a two-train system) must be operable. The NRC Safety
 
Evaluation (SE) for adoption of TSTF-372 clearly indicates that the train of EFW or core
 
cooling redundant to the system train in which a snubber is removed from service or otherwise declared inoperable must be operable in order to apply the provisions of LCO 3.0.8.
 
In order to ensure redundant train operability of EFW or other core cooling method relied upon, Entergy maintains several tiers of procedures and controls that prevent intrusive activities from
 
being performed on redundant trains of equipment. Corporate procedures that govern all
 
Entergy sites only permit work to be scheduled on one train at a time and that the aggregate
 
risk be assessed prior to removing various safety-related components from service on a given
 
train simultaneously. For example, if the red-train Emergency Diesel Generator (EDG) were removed from service, no intrusive activiti es would be permitted on or around any required green-train component, whether or not the component is related to the EDG. This
 
administrative control even prohibits activities t hat could in any way affect the availability or operability of the redundant train, including activities such as scaffold erection. With the red-
 
train EDG removed from service, other red-train components may be removed from service simultaneously, provide the aggregate station risk is maintained within acceptable limits.
 
In addition to Corporate upper-tier procedures, each station maintains lower-tier procedures to
 
provide additional checks and balances to ensure redundant equipment is adequately
 
protected during any maintenance window. If during a red-train maintenance window a green-
 
train component is unexpectedly found to be inoperable, procedures require immediate
 
corrective action to restore both trains to an operable status. Risk is also assessed for such
 
emergent conditions and appropriate compensatory measures, which could include a plant
 
shutdown, are established as warranted to reduce overall station risk.
 
In summary, Entergy nuclear facilities have well established controls with regard to redundant
 
train operability which have long been a part of the Entergy culture. These controls provide
 
ample assurance that the intent of the NRC SE requirement for ensuring the availability and
 
operability of a redundant EFW or core cooling system train will be maintained during snubber
 
inoperability periods. In this respect, Entergy believes no deviation from the TSTF is evident.
 
Notwithstanding the above, there are certain aspects of the aforementioned Condition 1(a) that
 
must be addressed. Condition 1(a) does not address lower modes of operation when EFW is
 
not required to be operable or Steam Generators (SGs) are otherwise unavailable. Therefore, Entergy requests deviation from TSTF-372 such that when EFW is not required to be operable
 
by TSs, the redundant train core cooling source being relied upon during these lower modes of    to 2CAN120801
 
Page 4 of 4
 
operation will be consider sufficient to meet the intent of the TSTF-372 SE. This condition was identified to the NRC following TSTF-372 approval and a revision is currently being considered
 
by the industry TSTF working group. As discussed previously, Entergy procedures currently
 
protect redundant equipment during a given train's maintenance window. Therefore, no
 
further administrative controls are required.
 
However, the TS Bases for LCO 3.0.8 as presented in TSTF-372 and the July 12, 2008, Entergy submittal does not describe the redundant EFW or core cooling source requirements. 
 
Entergy believes it is appropriate to include these restrictions in the TS Bases. In addition to
 
providing discussion relevant to Condition 1(a) above, discussion is also included to provide guidance associated with Condition 1(b). This is necessary since ANO-2 is a two-train facility
 
and no redundant EFW train would exist for a snubber that affects both trains of a given system. The affected TS Bases pages hav e been modified to provide discussion and guidance for various modes of operation. A revised markup of the associated TS Bases
 
pages is included in Attachment 2 and the added guidance is included below:
 
"When applying LCO 3.0.8.a, the redundant train Emergency Feedwater (EFW)
 
system must be OPERABLE during MODES when EFW is required to be
 
OPERABLE. When applying LCO 3.0.8.a during MODES when EFW is not required
 
to be OPERABLE, the redundant core cooling method (such as Shutdown Cooling (SDC) system) must be available. When applying LCO 3.0.8.b, a means of core
 
cooling must remain available (EFW, SDC, equipment necessary for feed and bleed
 
operations, etc.). Reliance on availability of a core cooling source during modes
 
where EFW is not required by TSs provides an equivalent safety margin for plant
 
operations were LCO 3.0.8 not applied and meets the intent of Technical
 
Specification Task Force (TSTF) 372."
 
Reliance on the redundant train core cooling source during modes where EFW is not required
 
by TSs provides an equivalent safety margin and meets the intent of the NRC SE conditions. 
 
Therefore, Entergy believes this deviation (or additional guidance) is acceptable.
 
Attachment 2 To  2CAN120801 Revised Markup of Affected Technical Specification Bases Pages (Information Only)
ARKANSAS - UNIT 2 B 3/4 0-1 e Rev. APPLICABILITY BASES (continued) 3.0.8 LCO 3.0.8 establishes conditions under which systems are considered to remain capable of performing their intended safety function when associated snubbers are not capable of providing their associated support function(s). This LCO states that the supported system is not considered to be inoperable solely due to one or more snubbers not capable of performing their associated support function(s). This is appropriate because a limited length of time is allowed for maintenance, testing, or repair of one or more snubbers not capable of performing their associated support function(s) and appropriate compensatory measures are specified in the snubber requirements, which are located outside of the Technical Specifications (TS) under licensee control. The snubber requirements do not meet the criteria in 10 CFR 50.36, and, as such, are appropriate for control by the licensee.
If the allowed time expires and the snubber(s) are unable to perform their associated support function(s), the affected supported system's LCO(s) must be declared not met and the ACTIONS entered in accordance with LCO 3.0.2.
LCO 3.0.8.a applies when one or more snubbers are not capable of providing their associated support function(s) to a single train or subsystem of a multiple train or subsystem supported system or to a single train or subsystem supported system.
LCO 3.0.8.a allows 72 hours to restore the snubber(s) before declaring the supported system inoperable. The 72-hour allowed outage time (AOT) is reasonable based on the low probability of a seismic event concurrent with an event that would require operation of the supported system occurring while the snubber(s) are not capable of performing their associated support function and due to the availability of the redundant train of the supported system.
LCO 3.0.8.b applies when one or more snubbers are not capable of providing their associated support function(s) to more than one train or subsystem of a multiple train or subsystem supported system. LCO 3.0.8.b allows 12 hours to restore the snubber(s) before declaring the supported system inoperable. The 12-hour AOT is reasonable based on the low probability of a seismic event concurrent with an event that would require operation of the supported system occurring while the snubber(s) are not capable of performing their associated support function.
When applying LCO 3.0.8.a, the redundant train Emergency Feedwater (EFW) system must be OPERABLE during MODES when EFW is required to be OPERABLE. When applying LCO 3.0.8.a during MODES when EFW is not required to be OPERABLE, the redundant core cooling method (such as Shutdown Cooling (SDC) system) must be available. When applying LCO 3.0.8.b, a means of core cooling must remain available (EFW, SDC, equipment necessary for feed and bleed operations, etc.). Reliance on availability of a core cooling source during modes where EFW is not required by TSs provides an equivalent safety margin for plant operations were LCO 3.0.8 not applied and meets the intent of Technical Specification Task Force (TSTF) 372.
 
ARKANSAS - UNIT 2 B 3/4 0-1 f Rev. APPLICABILITY BASES (continued) 3.0.8 (continued)
LCO 3.0.8 requires that risk be assessed and managed. Industry and NRC guidance on the implementation of 10 CFR 50.65(a)(4) (the Maintenance Rule) does not address seismic risk. However, use of LCO 3.0.8 should be considered with respect to other plant maintenance activities, and integrated into the existing Maintenance Rule process to the extent possible so that maintenance on any unaffected train or subsystem is properly controlled, and emergent issues ar e properly addressed. The risk assessment need not be quantified, but may be a qualitative awareness of the vulnerability of systems and components when one or more snubbers are not able to perform their associated support function.
LCO 3.0.8 does not apply to non-seismic snubbers. The provisions of LCO 3.0.8 are not to be applied to supported TS systems unl ess the supported systems would remain capable of performing their required safety or support functions for postulated design loads other than seismic loads.
The risk impact of dynamic loadings other than seismic loads was not assessed as part of the development of LCO 3.0.8. These shock-type loads include thrust loads, blowdown loads, water-hammer loads, steam-hammer loads, LOCA loads and pipe rupture loads. However, there are some important distinctions between non-seismic (shock-type) loads and seismic loads which indicate that, in general, the risk impact of the out-of-service snubbers is smaller for non-seismic loads than for seismic loads.
First, while a seismic load affects the entire plant, the impact of a non-seismic load is localized to a certain system or area of the plant. Second, although non-seismic shock loads may be higher in total force and the impact could be as much or more than seismic loads, generally they are of much shorter duration than seismic loads. Third, the impact of non-seismic loads is more plant specific, and thus harder to analyze generically, than for seismic loads. For these reasons, every time LCO 3.0.8 is applied, at least one train of each system that is supported by the inoperable snubber(s) should remain capable of performing their required safety or support functions for postulated design loads other than seismic loads.}}

Revision as of 11:12, 10 November 2018

Redirect to:

Retrieved from "https://kanterella.com/w/index.php?title=ML083460648&oldid=1177551"